[Nut-upsuser] Liebert GXT4

[Jim Klimov]

At this time, a newer version than pre-packaged would be a build from
master branch on github. We are still tying up some loose ends to cut a
nect official release.

Jim

On Fri, Feb 19, 2021, 05:06 Matthew Rivett via Nut-upsuser <
nut-upsuser at alioth-lists.debian.net> wrote:

> Hello,
>
> I am trying to connect to my Liebert GXT4 UPS using NUT.  I have been able
> to connect by using information from the following post.
>
> https://alioth-lists.debian.net/pipermail/nut-upsuser/2017-June/010682.html
>
> I am running on a Raspberry PI 3 Model B Rev 1.2
> pi at vpn01alp:~ $ cat /etc/os-release
> PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
> NAME="Raspbian GNU/Linux"
> VERSION_ID="9"
> VERSION="9 (stretch)"
> VERSION_CODENAME=stretch
> ID=raspbian
> ID_LIKE=debian
> HOME_URL="http://www.raspbian.org/"
> SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
> BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
>
> I installed using
> apt-get install nut nut-server nut-client
>
> My configuration is as follows
>  pi at vpn01alp:~ $ tail /etc/nut/ups.conf
> # the -h option and/or read the driver's documentation.
>
> # Set maxretry to 3 by default, this should mitigate race with slow
> devices:
> maxretry = 3
>
> [Liebert]
>         productid=0000
>         driver = usbhid-ups
>         port = auto
>         desc = "Liebert"
>
> I also added the following to  /lib/udev/rules.d/62-nut-usbups.rules
> #  Liebert GXT4  - usbhid-ups
> ATTR{idVendor}=="10af", ATTR{idProduct}=="0004", MODE="664", GROUP="nut"
>
> That didn't work so I changed permissions using the following
> pi at vpn01alp:~ $ lsusb
> Bus 001 Device 004: ID 10af:0000 Liebert Corp. UPS
> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514
> Fast Ethernet Adapter
> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> pi at vpn01alp:~ $ sudo chmod 0666 /dev/bus/usb/001/004
>
> Now I can see the following information.  It doesn't appear to be complete
> or accurate.
> pi at vpn01alp:~ $ upsc Liebert
> Init SSL without certificate database
> battery.charge: 100
> battery.charge.low: 20
> battery.charge.warning: 0
> battery.type: PbAc
> battery.voltage: 0.0
> battery.voltage.nominal: 0.0
> device.mfr: Emerson Network Power
> device.model: Liebert GXT4
> device.serial: 1718700042AFB93
> device.type: ups
> driver.name: usbhid-ups
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 2
> driver.parameter.port: auto
> driver.parameter.productid: 0000
> driver.parameter.synchronous: no
> driver.version: 2.7.4
> driver.version.data: Belkin/Liebert HID 0.17
> driver.version.internal: 0.41
> ups.mfr: Emerson Network Power
> ups.model: Liebert GXT4
> ups.productid: 0000
> ups.serial: 1718700042AFB93
> ups.status: OL CHRG
> ups.vendorid: 10af
>
> I'm not sure how to find the version of NUT I'm running.  I found the
> changelog (/usr/share/doc/nut) and I'm guessing this is my issue.  It
> appears the latest comment was from 2017.
>
> nut (2.7.4-5) unstable; urgency=medium
>
>   * debian/control: Build-depends against asciidoc-dblatex, Recommends are
> not
>     pulled automatically by the buildd (Closes: #851015)
>
>  -- Laurent Bigonville <bigon at debian.org>  Wed, 25 Jan 2017 09:14:10 +0100
>
> I am guessing I need to install a newer version.  Is this correct?
>
> Thanks,
> Matt
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20210222/6fbdff1e/attachment.htm>