[Nut-upsuser] usbhid-ups not loading with Arduino Leonardo on Ubuntu 23.10

[Kelly Byrd]

Looking at the output of lsub in my original message:
`bNumInterfaces          1`
Then there's only one Interface Descriptor section.

I can modify the USB code the runs on the Arduino, if needed. I'm looking
for help on what is going wrong and what I could modify to fix it. I have
seen reports of folks claiming this just worked for them out of the box, so
unsure what to do next.



On Sun, Oct 29, 2023 at 4:13 PM Jim Klimov <jimklimov+nut at gmail.com> wrote:

> OTOH: I wonder whether, when it says "Claimed interface 2 successfully"
> it got the right number of the correct (HID) one of many interfaces you
> likely have there?.. :\
>
> Jim
>
>
> On Mon, Oct 30, 2023, 00:04 Kelly Byrd <kbyrd at memcpy.com> wrote:
>
>>
>>
>> Apologies for the long post. I'm trying to include what I hope are the
>> relevant bits (output of lsusb -v and usbhid-ups)
>>
>> Long term goal: I've got a DIY UPS that I would like to get working with
>> my QNAP NAS (which uses Linux and NUT underneath the hood)
>> ...
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20231029/5385421b/attachment.htm>