[Nut-upsuser] PR to test for users of Qx devices (blazer and nutdrv_qx)
Jim Klimov
jimklimov+nut at gmail.com
Mon Sep 4 23:05:15 BST 2023
Hello all,
Had another hard look at the PR for QX device voltage/charge/runtime
fixes for some broken use-cases (AND hoping to not introduce problems for
cases that were not broken), and hopefully found and rolled back the change
which in fact introduced the strangeness found in our winter round of
tests. Then the year was busy...
As before, the context for this is:
* issue https://github.com/networkupstools/nut/issues/1279
* PR https://github.com/networkupstools/nut/pull/1652
* PR source git branch (code to build for tests)
https://github.com/jimklimov/nut/tree/issue-1279
*
https://github.com/networkupstools/nut/wiki/Building-NUT-for-in%E2%80%90place-upgrades-or-non%E2%80%90disruptive-tests
suggests how to quickly build and test a driver
The new battery_voltage_reports_one_pack (introduced by the PR) could be
used as a flag in ups.conf for devices which report only a smallish ~2V
value in their native `battery.voltage` along with an
override.battery.packs setting,
where needed.
The main question for testing is if your old (packaged 2.8.0 or 2.7.4,
master-branch custom builds, etc.) NUT driver binaries reported *some
reasonable values* (for battery voltages, charge, runtime, maybe packs),
and that the tested build would report the same sort of values - e.g. no
regression. And if your older NUT drivers did previously report some broken
values (such as charges under 100% for well-charged UPSes, bogus "actual"
battery voltage, etc.) then that the PR would fix that on its own or
possibly in tandem with `ups.conf` options such as `runtimecal` and
overrides discussed in that issue and PR on github.
Looking forward to data points that would allow me to finally merge this
PR (or understand what remains broken, if any) :)
Thanks in advance,
Jim Klimov
On Thu, Jan 19, 2023 at 6:03 AM d tbsky <tbskyd at gmail.com> wrote:
> Jim Klimov <jimklimov+nut at gmail.com>
> > @tbsky:
> > Can you please check if 2.7.4 also reports the huge voltages for the 3kW
> and 10kW units, or something around 13.5V? Does it set "battery.packs" to
> 20 or 6?
> > Namely, I wonder if the new "battery_voltage_reports_one_pack" handling
> (and with no such option in your configs) misfires here somehow?..
> >
> > Also, can you please re-run the tests with the PR-ed branch build and
> higher verbosity (e.g. `./nutdrv_qx -a ftups -DDDDDD -d1`) to help trace
> whether values optionally guessed by qx_initbattery() are in fact guessed
> or directly provided by respective devices (and subdrivers)?..
>
> Hi:
> I retest them with 2.7.4 and 2.8.x(with debugging). results below.
> I hope they can reveal some information.
>
> 2.7.4:
> 10KV:
> >upsc ftups
> battery.charge: 100
> battery.packs: 1
> battery.protection: yes
> battery.runtime: 600
> battery.voltage: 272.90
> battery.voltage.nominal: 240.0
> device.model: G10K
> device.type: ups
> driver.name: nutdrv_qx
> driver.parameter.bypass_when_off: disabled
> driver.parameter.offdelay: 12
> driver.parameter.ondelay: 60
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 10
> driver.parameter.port: auto
> driver.parameter.synchronous: yes
> driver.version: 2.7.4
> driver.version.data: Voltronic 0.06
> driver.version.internal: 0.28
> input.current.nominal: 45.0
> input.frequency: 60.0
> input.frequency.nominal: 60.0
> input.phases: 1
> input.transfer.high: 231
> input.transfer.high.max: 244
> input.transfer.high.min: 231
> input.transfer.low: 209
> input.transfer.low.max: 209
> input.transfer.low.min: 196
> input.voltage: 218.7
> input.voltage.nominal: 230.0
> outlet.0.switchable: no
> output.current: 2.8
> output.current.nominal: 45
> output.frequency: 60.0
> output.frequency.nominal: 60.0
> output.phases: 1
> output.powerfactor: 0.8
> output.voltage: 218.7
> output.voltage.nominal: 220.0
> ups.beeper.status: enabled
> ups.delay.shutdown: 12
> ups.delay.start: 60
> ups.firmware: 00077.13
> ups.firmware.aux: P02
> ups.load: 7
> ups.power.nominal: 10000
> ups.productid: 5161
> ups.start.auto: yes
> ups.status: OL
> ups.temperature: 25.2
> ups.type: online
> ups.vendorid: 0665
>
> 3KV:
> >upsc ftups
> Init SSL without certificate database
> battery.charge: 100
> battery.energysave: no
> battery.packs: 1
> battery.protection: yes
> battery.runtime: 2520
> battery.voltage: 82.00
> battery.voltage.nominal: 72.0
> device.model: 3K
> device.type: ups
> driver.name: nutdrv_qx
> driver.parameter.bypass_when_off: disabled
> driver.parameter.offdelay: 30
> driver.parameter.ondelay: 60
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 10
> driver.parameter.port: auto
> driver.parameter.synchronous: yes
> driver.version: 2.7.4
> driver.version.data: Voltronic 0.06
> driver.version.internal: 0.28
> input.current.nominal: 27.0
> input.frequency: 60.0
> input.frequency.nominal: 60.0
> input.phases: 1
> input.transfer.high: 116
> input.transfer.high.max: 122
> input.transfer.high.min: 113
> input.transfer.low: 104
> input.transfer.low.max: 107
> input.transfer.low.min: 98
> input.voltage: 112.6
> input.voltage.nominal: 110.0
> outlet.0.switchable: no
> output.current: 5.0
> output.current.nominal: 27
> output.frequency: 60.0
> output.frequency.nominal: 60.0
> output.phases: 1
> output.power.maximum.percent: 19
> output.power.minimum.percent: 18
> output.powerfactor: 0.8
> output.voltage: 109.8
> output.voltage.nominal: 110.0
> ups.beeper.status: enabled
> ups.delay.shutdown: 30
> ups.delay.start: 60
> ups.firmware: 00204.06
> ups.firmware.aux: P01
> ups.load: 19
> ups.power.nominal: 3000
> ups.productid: 5161
> ups.start.auto: yes
> ups.start.battery: yes
> ups.status: OL
> ups.temperature: 17.3
> ups.type: online
> ups.vendorid: 0665
>
> 2KV:
> >upsc ftups
> battery.charge: 100
> battery.voltage: 13.50
> battery.voltage.high: 13.00
> battery.voltage.low: 10.40
> battery.voltage.nominal: 12.0
> device.type: ups
> driver.name: nutdrv_qx
> driver.parameter.bypass_when_off: disabled
> driver.parameter.offdelay: 30
> driver.parameter.ondelay: 60
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 10
> driver.parameter.port: auto
> driver.parameter.synchronous: yes
> driver.version: 2.7.4
> driver.version.data: Voltronic-QS 0.07
> driver.version.internal: 0.28
> input.voltage: 120.6
> input.voltage.fault: 120.6
> output.current.nominal: 6.0
> output.frequency: 59.9
> output.frequency.nominal: 60
> output.voltage: 102.3
> output.voltage.nominal: 110
> ups.beeper.status: enabled
> ups.delay.shutdown: 30
> ups.delay.start: 60
> ups.firmware.aux: PM-V
> ups.load: 32
> ups.productid: 5161
> ups.status: OL TRIM
> ups.type: offline / line interactive
> ups.vendorid: 0665
>
> 2.8.x:
> 10KV:
> ./nutdrv_qx -a ftups -DDDDDD -d1
> Network UPS Tools - Generic Q* USB/Serial driver 0.33
> (Windows-v2.8.0-alpha3-1252-g757813e)
> USB communication driver (libusb 0.1) 0.44
> 0.000000 [D1] debug level is '6'
> 0.000192 [D1] Succeeded to become_user(nut): now UID=57 GID=57
> 0.000198 [D5] send_to_all: SETINFO device.type "ups"
> 0.000201 [D5] send_to_all: SETINFO driver.state "init.device"
> 0.000204 [D1] upsdrv_initups...
> 0.001581 [D3] usb_busses=0xf5bef0
> 0.001588 [D2] Checking device (8087/8000) (002/002)
> 0.001605 [D1] Failed to open device (8087/8000), skipping:
> Permission denied
> 0.001611 [D2] Checking device (1D6B/0002) (002/001)
> 0.001616 [D1] Failed to open device (1D6B/0002), skipping:
> Permission denied
> 0.001618 [D2] Checking device (8087/8008) (001/002)
> 0.001622 [D1] Failed to open device (8087/8008), skipping:
> Permission denied
> 0.001625 [D2] Checking device (1D6B/0002) (001/001)
> 0.001628 [D1] Failed to open device (1D6B/0002), skipping:
> Permission denied
> 0.001631 [D2] Checking device (1D6B/0003) (004/001)
> 0.001635 [D1] Failed to open device (1D6B/0003), skipping:
> Permission denied
> 0.001637 [D2] Checking device (9966/0202) (003/003)
> 0.001641 [D1] Failed to open device (9966/0202), skipping:
> Permission denied
> 0.001644 [D2] Checking device (0557/2419) (003/004)
> 0.001648 [D1] Failed to open device (0557/2419), skipping:
> Permission denied
> 0.001650 [D2] Checking device (0557/7000) (003/002)
> 0.001654 [D1] Failed to open device (0557/7000), skipping:
> Permission denied
> 0.001656 [D2] Checking device (0665/5161) (003/008)
> 0.004203 [D1] libusb_open get iManufacturer failed, retrying...
> 0.006463 [D1] libusb_open get iManufacturer failed, retrying...
> 0.008989 [D1] libusb_open get iManufacturer failed, retrying...
> 0.011261 [D1] libusb_open get iProduct failed, retrying...
> 0.013722 [D1] libusb_open get iProduct failed, retrying...
> 0.016049 [D1] libusb_open get iProduct failed, retrying...
> 0.016053 [D2] - VendorID: 0665
> 0.016055 [D2] - ProductID: 5161
> 0.016057 [D2] - Manufacturer: unknown
> 0.016059 [D2] - Product: unknown
> 0.016061 [D2] - Serial Number: unknown
> 0.016063 [D2] - Bus: 003
> 0.016065 [D2] - Device: 008
> 0.016067 [D2] - Device release number: 0001
> 0.016069 [D2] Trying to match device
> 0.016071 [D3] match_function_regex: matching a device...
> 0.016074 [D2] Device matches
> 0.016087 [D3] nut_usb_set_altinterface: skipped
> usb_set_altinterface(udev, 0)
> 0.016091 [D5] send_to_all: SETINFO ups.vendorid "0665"
> 0.016094 [D5] send_to_all: SETINFO ups.productid "5161"
> 0.017431 [D3] send: QGS
> 0.075931 [D5] read [ 0]: (8 bytes) => 28 32 31 36 2e 39 20 36
> 0.107929 [D5] read [ 8]: (8 bytes) => 30 2e 30 20 32 32 30 2e
> 0.147930 [D5] read [ 16]: (8 bytes) => 34 20 35 39 2e 39 20 30
> 0.179924 [D5] read [ 24]: (8 bytes) => 30 32 2e 38 20 30 30 37
> 0.219926 [D5] read [ 32]: (8 bytes) => 20 33 36 31 2e 38 20 33
> 0.251927 [D5] read [ 40]: (8 bytes) => 36 31 2e 38 20 32 37 32
> 0.291909 [D5] read [ 48]: (8 bytes) => 2e 39 20 2d 2d 2d 2e 2d
> 0.323924 [D5] read [ 56]: (8 bytes) => 20 30 32 35 2e 34 20 31
> 0.355924 [D5] read [ 64]: (8 bytes) => 30 30 30 30 30 30 30 30
> 0.379924 [D5] read [ 72]: (8 bytes) => 30 30 30 0d 20 32 37 32
> 0.379929 [D3] read: (216.9 60.0 220.4 59.9 002.8 007 361.8
> 361.8 272.9 ---.- 025.4 100000000000
> 0.379946 [D5] send_to_all: SETINFO input.voltage "216.9"
> 0.381097 [D3] send: QPI
> 0.427922 [D5] read [ 0]: (8 bytes) => 28 50 49 30 32 0d 00 00
> 0.427927 [D3] read: (PI02
> 0.427987 [D5] send_to_all: SETINFO ups.firmware.aux "P02"
> 0.427990 Using protocol: Voltronic 0.07
> 0.427993 [D5] send_to_all: SETINFO driver.state "init.quiet"
> 0.427997 [D5] send_to_all: SETINFO driver.version
> "Windows-v2.8.0-alpha3-1252-g757813e"
> 0.428000 [D5] send_to_all: SETINFO driver.version.internal "0.33"
> 0.428003 [D5] send_to_all: SETINFO driver.name "nutdrv_qx"
> 0.428005 [D5] send_to_all: SETINFO driver.state "init.info"
> 0.428008 [D1] upsdrv_initinfo...
> 0.428011 [D5] send_to_all: SETINFO driver.version.data "Voltronic
> 0.07"
> 0.429229 [D3] send: QRI
> 0.483926 [D5] read [ 0]: (8 bytes) => 28 32 32 30 2e 30 20 30
> 0.523927 [D5] read [ 8]: (8 bytes) => 34 35 20 32 34 30 2e 30
> 0.547926 [D5] read [ 16]: (8 bytes) => 20 36 30 2e 30 0d 00 00
> 0.547931 [D3] read: (220.0 045 240.0 60.0
> 0.547940 [D5] send_to_all: SETINFO output.voltage.nominal "220.0"
> 0.547946 [D5] send_to_all: SETINFO output.current.nominal "45"
> 0.547950 [D5] send_to_all: SETINFO battery.voltage.nominal "240.0"
> 0.547956 [D5] send_to_all: SETINFO output.frequency.nominal "60.0"
> 0.549288 [D3] send: QMD
> 0.603919 [D5] read [ 0]: (8 bytes) => 28 23 23 23 23 23 23 23
> 0.643924 [D5] read [ 8]: (8 bytes) => 23 23 23 23 47 31 30 4b
> 0.675924 [D5] read [ 16]: (8 bytes) => 20 23 23 31 30 30 30 30
> 0.715923 [D5] read [ 24]: (8 bytes) => 20 38 30 20 31 2f 31 20
> 0.747920 [D5] read [ 32]: (8 bytes) => 32 33 30 20 32 33 30 20
> 0.787921 [D5] read [ 40]: (8 bytes) => 32 30 20 31 32 2e 30 0d
> 0.787927 [D3] read: (###########G10K ##10000 80 1/1 230 230 20 12.0
> 0.787936 [D5] send_to_all: SETINFO device.model "G10K"
> 0.787940 [D5] send_to_all: SETINFO ups.power.nominal "10000"
> 0.787946 [D5] send_to_all: SETINFO output.powerfactor "0.8"
> 0.787953 [D5] send_to_all: SETINFO input.phases "1"
> 0.787957 [D5] send_to_all: SETINFO output.phases "1"
> 0.787961 [D5] send_to_all: SETINFO input.voltage.nominal "230.0"
> 0.789227 [D3] send: F
> 0.835919 [D5] read [ 0]: (8 bytes) => 23 32 32 30 2e 30 20 30
> 0.875923 [D5] read [ 8]: (8 bytes) => 34 35 20 32 34 30 2e 30
> 0.899925 [D5] read [ 16]: (8 bytes) => 20 36 30 2e 30 0d 00 00
> 0.899931 [D3] read: #220.0 045 240.0 60.0
> 0.899939 [D5] send_to_all: SETINFO input.current.nominal "45.0"
> 0.899945 [D5] send_to_all: SETINFO input.frequency.nominal "60.0"
> 0.901226 [D3] send: QMF
> 0.947921 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
> 0.947927 [D3] read: (NAK
> 0.947930 [D2] qx_process_answer: query rejected by the UPS
> (device.mfr)
> 0.949218 [D3] send: QVFW
> 1.011917 [D5] read [ 0]: (8 bytes) => 28 56 45 52 46 57 3a 30
> 1.043922 [D5] read [ 8]: (8 bytes) => 30 30 37 37 2e 31 33 0d
> 1.043927 [D3] read: (VERFW:00077.13
> 1.043932 [D5] send_to_all: SETINFO ups.firmware "00077.13"
> 1.045155 [D3] send: QID
> 1.091916 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
> 1.091920 [D3] read: (NAK
> 1.091923 [D2] qx_process_answer: query rejected by the UPS
> (device.serial)
> 1.093154 [D3] send: I
> 1.139915 [D5] read [ 0]: (8 bytes) => 20 20 20 20 20 20 20 20
> 1.147922 [D5] read [ 8]: (8 bytes) => 0d 00 00 00 00 00 00 00
> 1.147928 [D3] read:
> 1.147930 [D2] qx_process_answer: short reply (device.mfr)
> 1.149214 [D3] send: QGS
> 1.203920 [D5] read [ 0]: (8 bytes) => 28 32 31 37 2e 38 20 35
> 1.243920 [D5] read [ 8]: (8 bytes) => 39 2e 39 20 32 32 30 2e
> 1.275916 [D5] read [ 16]: (8 bytes) => 34 20 36 30 2e 30 20 30
> 1.315917 [D5] read [ 24]: (8 bytes) => 30 32 2e 38 20 30 30 37
> 1.347915 [D5] read [ 32]: (8 bytes) => 20 33 36 31 2e 38 20 33
> 1.379917 [D5] read [ 40]: (8 bytes) => 36 31 2e 38 20 32 37 32
> 1.419915 [D5] read [ 48]: (8 bytes) => 2e 39 20 2d 2d 2d 2e 2d
> 1.451914 [D5] read [ 56]: (8 bytes) => 20 30 32 35 2e 32 20 31
> 1.491911 [D5] read [ 64]: (8 bytes) => 30 30 30 30 30 30 30 30
> 1.507915 [D5] read [ 72]: (8 bytes) => 30 30 30 0d 20 32 37 32
> 1.507921 [D3] read: (217.8 59.9 220.4 60.0 002.8 007 361.8
> 361.8 272.9 ---.- 025.2 100000000000
> 1.507934 [D5] send_to_all: SETINFO input.frequency "59.9"
> 1.507940 [D5] send_to_all: SETINFO output.voltage "220.4"
> 1.507944 [D5] send_to_all: SETINFO output.frequency "60.0"
> 1.507950 [D5] send_to_all: SETINFO output.current "2.8"
> 1.507954 [D5] send_to_all: SETINFO ups.load "7"
> 1.507959 [D5] send_to_all: SETINFO battery.voltage "272.9"
> 1.507964 [D5] send_to_all: SETINFO ups.temperature "25.2"
> 1.507971 [D5] send_to_all: SETINFO ups.type "online"
> 1.507975 [D5] update_status: OL
> 1.507977 [D5] update_status: !LB
> 1.507984 [D5] update_status: !CAL
> 1.507989 [D5] update_status: !FSD
> 1.507993 [D5] send_to_all: SETINFO ups.beeper.status "enabled"
> 1.509278 [D3] send: QMOD
> 1.547916 [D5] read [ 0]: (8 bytes) => 28 4c 0d 00 00 00 00 00
> 1.547921 [D3] read: (L
> 1.547927 [D5] update_status: OL
> 1.549157 [D3] send: QWS
> 1.603912 [D5] read [ 0]: (8 bytes) => 28 30 30 30 30 30 30 30
> 1.643913 [D5] read [ 8]: (8 bytes) => 30 30 30 30 30 30 30 30
> 1.675914 [D5] read [ 16]: (8 bytes) => 30 30 30 30 30 30 30 30
> 1.707913 [D5] read [ 24]: (8 bytes) => 30 30 30 30 30 30 30 30
> 1.747910 [D5] read [ 32]: (8 bytes) => 30 30 30 30 30 30 30 30
> 1.779908 [D5] read [ 40]: (8 bytes) => 30 30 30 30 30 30 30 30
> 1.819910 [D5] read [ 48]: (8 bytes) => 30 30 30 30 30 30 30 30
> 1.851911 [D5] read [ 56]: (8 bytes) => 30 30 30 30 30 30 30 30
> 1.859909 [D5] read [ 64]: (8 bytes) => 30 0d 30 30 30 30 30 30
> 1.859913 [D3] read:
> (0000000000000000000000000000000000000000000000000000000000000000
> 1.861214 [D3] send: QBV
> 1.915912 [D5] read [ 0]: (8 bytes) => 28 32 37 32 2e 39 20 32
> 1.955910 [D5] read [ 8]: (8 bytes) => 30 20 30 31 20 31 30 30
> 1.971911 [D5] read [ 16]: (8 bytes) => 20 30 31 30 0d 00 00 00
> 1.971916 [D3] read: (272.9 20 01 100 010
> 1.971921 battery_number: 20
> 1.971927 battery_number, settable range: 1..9
> 1.971933 [D5] send_to_all: SETINFO battery.packs "1"
> 1.971936 [D5] send_to_all: SETFLAGS battery.packs RW
> 1.971939 [D5] send_to_all: ADDRANGE battery.packs 1 99
> 1.971942 [D5] send_to_all: SETFLAGS battery.packs RW NUMBER
> 1.971946 [D5] send_to_all: SETINFO battery.charge "100"
> 1.971950 [D5] send_to_all: SETINFO battery.runtime "600"
> 1.973146 [D3] send: QLDL
> 2.019909 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
> 2.019914 [D3] read: (NAK
> 2.019920 [D2] qx_process_answer: query rejected by the UPS
> (output.power.minimum.percent)
> 2.019923 [D2] qx_process_answer: query rejected by the UPS
> (output.power.maximum.percent)
> 2.021213 [D3] send: QFLAG
> 2.083912 [D5] read [ 0]: (8 bytes) => 28 45 70 62 72 61 73 64
> 2.123904 [D5] read [ 8]: (8 bytes) => 74 69 44 6f 76 65 66 6a
> 2.131908 [D5] read [ 16]: (8 bytes) => 6d 0d 00 00 00 00 00 00
> 2.131913 [D3] read: (EpbrasdtiDovefjm
> 2.131928 [D5] send_to_all: SETINFO ups.start.auto "yes"
> 2.131931 [D5] send_to_all: SETFLAGS ups.start.auto RW
> 2.131935 [D5] send_to_all: ADDENUM ups.start.auto "no"
> 2.131938 [D5] send_to_all: ADDENUM ups.start.auto "yes"
> 2.131943 [D5] send_to_all: SETINFO battery.protection "yes"
> 2.131946 [D5] send_to_all: SETFLAGS battery.protection RW
> 2.131949 [D5] send_to_all: ADDENUM battery.protection "no"
> 2.131951 [D5] send_to_all: ADDENUM battery.protection "yes"
> 2.131956 [D4] ups_infoval_set: failed to preprocess value
> [battery.energysave: EpbrasdtiDovefjm]
> 2.131960 [D4] ups_infoval_set: failed to preprocess value
> [ups.start.battery: EpbrasdtiDovefjm]
> 2.131966 [D5] send_to_all: SETINFO outlet.0.switchable "no"
> 2.131969 [D5] send_to_all: SETFLAGS outlet.0.switchable RW
> 2.131972 [D5] send_to_all: ADDENUM outlet.0.switchable "no"
> 2.131974 [D5] send_to_all: ADDENUM outlet.0.switchable "yes"
> 2.131977 bypass_alarm: enabled
> 2.131982 battery_alarm: enabled
> 2.131987 bypass_when_off: disabled
> 2.132000 alarm_control: enabled
> 2.132003 converter_mode: disabled
> 2.132021 eco_mode: disabled
> 2.132025 battery_open_status_check: enabled
> 2.132028 bypass_forbidding: disabled
> 2.132033 [D4] ups_infoval_set: failed to preprocess value
> [site_fault_detection: EpbrasdtiDovefjm]
> 2.132036 [D4] ups_infoval_set: failed to preprocess value
> [advanced_eco_mode: EpbrasdtiDovefjm]
> 2.132039 [D4] ups_infoval_set: failed to preprocess value
> [constant_phase_angle: EpbrasdtiDovefjm]
> 2.132042 [D4] ups_infoval_set: failed to preprocess value
> [limited_runtime_on_battery: EpbrasdtiDovefjm]
> 2.132047 setvar(bypass_when_off, disabled)
> 2.132049 bypass_when_off is already disabled
> 2.132051 setvar: FAILED
> 2.133339 [D3] send: QHE
> 2.187906 [D5] read [ 0]: (8 bytes) => 28 32 33 31 20 32 30 39
> 2.195908 [D5] read [ 8]: (8 bytes) => 20 0d 00 00 00 00 00 00
> 2.195912 [D3] read: (231 209
> 2.195925 [D5] send_to_all: SETINFO input.transfer.high "231"
> 2.195928 [D5] send_to_all: SETFLAGS input.transfer.high RW
> 2.195931 [D5] send_to_all: ADDRANGE input.transfer.high 231 244
> 2.195933 [D5] send_to_all: SETFLAGS input.transfer.high RW NUMBER
> 2.195940 [D5] send_to_all: SETINFO input.transfer.low "209"
> 2.195943 [D5] send_to_all: SETFLAGS input.transfer.low RW
> 2.195946 [D5] send_to_all: ADDRANGE input.transfer.low 196 209
> 2.195948 [D5] send_to_all: SETFLAGS input.transfer.low RW NUMBER
> 2.195952 [D5] send_to_all: SETINFO input.transfer.low.min "196"
> 2.195957 [D5] send_to_all: SETINFO input.transfer.low.max "209"
> 2.195962 [D5] send_to_all: SETINFO input.transfer.high.min "231"
> 2.195966 [D5] send_to_all: SETINFO input.transfer.high.max "244"
> 2.197269 [D3] send: QFRE
> 2.243908 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
> 2.243913 [D3] read: (NAK
> 2.243916 [D2] qx_process_answer: query rejected by the UPS
> (input.frequency.high)
> 2.243919 [D2] qx_process_answer: query rejected by the UPS
> (input.frequency.low)
> 2.245272 [D3] send: QBYV
> 2.307907 [D5] read [ 0]: (8 bytes) => 28 32 36 34 20 31 31 30
> 2.315910 [D5] read [ 8]: (8 bytes) => 0d 00 00 00 00 00 00 00
> 2.315915 [D3] read: (264 110
> 2.315920 max_bypass_volt: 264
> 2.315927 max_bypass_volt, settable range: 231..276
> 2.315931 min_bypass_volt: 110
> 2.315936 min_bypass_volt, settable range: 110..209
> 2.317269 [D3] send: QBYF
> 2.379904 [D5] read [ 0]: (8 bytes) => 28 36 34 2e 30 20 35 36
> 2.387902 [D5] read [ 8]: (8 bytes) => 2e 30 0d 00 00 00 00 00
> 2.387906 [D3] read: (64.0 56.0
> 2.387910 max_bypass_freq: 64.0
> 2.387916 max_bypass_freq, settable range: 61.0..64.0
> 2.387920 min_bypass_freq: 56.0
> 2.387924 min_bypass_freq, settable range: 56.0..59.0
> 2.387929 [D2] setvar: nothing to do... [battery_number]
> 2.389143 [D3] send: RE0
> 2.619925 [D5] read [ 0]: (8 bytes) => 00 00 00 00 00 00 00 00
> 3.622015 [D3] read: Connection timed out (-110)
> 3.622032 [D4] qx_process: failed to preprocess answer
> [battery.voltage.low]
> 3.623374 [D3] send: QPD
> 3.667908 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
> 3.667920 [D3] read: (NAK
> 3.667928 [D2] qx_process_answer: query rejected by the UPS
> (input_phase_angle)
> 3.667933 [D2] qx_process_answer: query rejected by the UPS
> (output_phase_angle)
> 3.669140 [D3] send: QPAR
> 3.715928 [D5] read [ 0]: (8 bytes) => 28 30 31 0d 00 00 00 00
> 3.715940 [D3] read: (01
> ] 3.715946 [D2] voltronic_parallel: non numerical value
> [voltronic_parallel: 01
> ] 3.715949 [D4] ups_infoval_set: failed to preprocess value
> [voltronic_parallel: 01
> 3.715959 [D5] send_to_all: ADDCMD load.off
> 3.715962 [D5] send_to_all: ADDCMD load.on
> 3.715965 [D5] send_to_all: ADDCMD shutdown.return
> 3.715967 [D5] send_to_all: ADDCMD shutdown.stayoff
> 3.715970 [D5] send_to_all: ADDCMD shutdown.stop
> 3.715973 [D5] send_to_all: ADDCMD test.battery.start
> 3.715975 [D5] send_to_all: ADDCMD test.battery.start.deep
> 3.715978 [D5] send_to_all: ADDCMD test.battery.start.quick
> 3.715981 [D5] send_to_all: ADDCMD test.battery.stop
> 3.715984 [D5] send_to_all: ADDCMD beeper.toggle
> 3.715986 [D5] send_to_all: ADDCMD beeper.enable
> 3.715989 [D5] send_to_all: ADDCMD beeper.disable
> 3.715992 [D5] send_to_all: ADDCMD bypass.start
> 3.715994 [D5] send_to_all: ADDCMD bypass.stop
> 3.715998 [D5] send_to_all: SETINFO ups.delay.start "180"
> 3.716002 [D5] send_to_all: SETFLAGS ups.delay.start RW
> 3.716006 [D5] send_to_all: ADDRANGE ups.delay.start 0 599940
> 3.716009 [D5] send_to_all: SETFLAGS ups.delay.start RW NUMBER
> 3.716012 [D5] send_to_all: SETINFO ups.delay.shutdown "30"
> 3.716015 [D5] send_to_all: SETFLAGS ups.delay.shutdown RW
> 3.716027 [D5] send_to_all: ADDRANGE ups.delay.shutdown 12 5940
> 3.716030 [D5] send_to_all: SETFLAGS ups.delay.shutdown RW NUMBER
> 3.716034 No values for battery high/low voltages
> 3.716039 [D5] send_to_all: SETINFO battery.voltage.low "208.00"
> 3.716055 [D5] send_to_all: SETINFO battery.voltage.high "300.00"
> 3.716058 Using 'guesstimation' (low: 208.000000, high: 300.000000)!
> 3.716080 setvar(ups.delay.start, 60)
> 3.716093 [D2] setvar: setting server side variable ups.delay.start
> 3.716096 [D5] send_to_all: SETINFO ups.delay.start "60"
> 3.716099 setvar: SUCCEED
> 3.716113 setvar(ups.delay.shutdown, 12)
> 3.716116 [D2] setvar: setting server side variable
> ups.delay.shutdown
> 3.716119 [D5] send_to_all: SETINFO ups.delay.shutdown "12"
> 3.716121 setvar: SUCCEED
> 3.716127 [D5] send_to_all: SETINFO driver.parameter.pollfreq "30"
> 3.716133 [D5] send_to_all: SETINFO driver.state "init.updateinfo"
> 3.716136 [D1] upsdrv_updateinfo...
> 3.716138 [D1] Quick update...
> 3.717379 [D3] send: QGS
> 3.771896 [D5] read [ 0]: (8 bytes) => 28 32 31 36 2e 39 20 35
> 3.811874 [D5] read [ 8]: (8 bytes) => 39 2e 39 20 32 31 39 2e
> 3.843894 [D5] read [ 16]: (8 bytes) => 35 20 36 30 2e 30 20 30
> 3.883889 [D5] read [ 24]: (8 bytes) => 30 32 2e 38 20 30 30 37
> 3.915894 [D5] read [ 32]: (8 bytes) => 20 33 36 31 2e 38 20 33
> 3.947892 [D5] read [ 40]: (8 bytes) => 36 31 2e 33 20 32 37 32
> 3.987887 [D5] read [ 48]: (8 bytes) => 2e 39 20 2d 2d 2d 2e 2d
> 4.019889 [D5] read [ 56]: (8 bytes) => 20 30 32 35 2e 34 20 31
> 4.059890 [D5] read [ 64]: (8 bytes) => 30 30 30 30 30 30 30 30
> 4.075889 [D5] read [ 72]: (8 bytes) => 30 30 30 0d 20 32 37 32
> 4.075894 [D3] read: (216.9 59.9 219.5 60.0 002.8 007 361.8
> 361.3 272.9 ---.- 025.4 100000000000
> 4.075899 [D5] update_status: OL
> 4.075902 [D5] update_status: !LB
> 4.075906 [D5] update_status: !CAL
> 4.075909 [D5] update_status: !FSD
> 4.075916 [D5] send_to_all: SETINFO ups.status "OL"
> 4.075919 [D5] send_to_all: DATAOK
> 4.075921 [D5] send_to_all: SETINFO driver.state "init.quiet"
> 4.075925 [D5] send_to_all: SETINFO driver.parameter.pollinterval
> "10"
> 4.075928 [D5] send_to_all: SETINFO driver.parameter.synchronous
> "yes"
> 4.075931 [D5] send_to_all: SETINFO driver.state "quiet"
> 4.075933 [D1] Driver initialization completed, beginning data
> dump (1 loops)
> 4.075936 [D5] send_to_all: SETINFO driver.state "updateinfo"
> 4.075938 [D1] upsdrv_updateinfo...
> 4.075940 [D1] Quick update...
> 4.077120 [D3] send: QGS
> 4.131888 [D5] read [ 0]: (8 bytes) => 28 32 31 36 2e 39 20 35
> 4.171889 [D5] read [ 8]: (8 bytes) => 39 2e 39 20 32 31 38 2e
> 4.203867 [D5] read [ 16]: (8 bytes) => 37 20 36 30 2e 30 20 30
> 4.243908 [D5] read [ 24]: (8 bytes) => 30 33 2e 31 20 30 30 37
> 4.275890 [D5] read [ 32]: (8 bytes) => 20 33 36 31 2e 38 20 33
> 4.315895 [D5] read [ 40]: (8 bytes) => 36 31 2e 38 20 32 37 32
> 4.347870 [D5] read [ 48]: (8 bytes) => 2e 39 20 2d 2d 2d 2e 2d
> 4.379883 [D5] read [ 56]: (8 bytes) => 20 30 32 35 2e 32 20 31
> 4.419889 [D5] read [ 64]: (8 bytes) => 30 30 30 30 30 30 30 30
> 4.435887 [D5] read [ 72]: (8 bytes) => 30 30 30 0d 20 32 37 32
> 4.435892 [D3] read: (216.9 59.9 218.7 60.0 003.1 007 361.8
> 361.8 272.9 ---.- 025.2 100000000000
> 4.435898 [D5] update_status: OL
> 4.435901 [D5] update_status: !LB
> 4.435905 [D5] update_status: !CAL
> 4.435908 [D5] update_status: !FSD
> 4.435917 [D5] send_to_all: SETINFO driver.state "quiet"
> 4.435920 [D5] send_to_all: SETINFO driver.state "updateinfo"
> 4.435923 [D1] upsdrv_updateinfo...
> 4.435926 [D1] Quick update...
> 4.437133 [D3] send: QGS
> 4.491888 [D5] read [ 0]: (8 bytes) => 28 32 31 36 2e 39 20 35
> 4.531888 [D5] read [ 8]: (8 bytes) => 39 2e 39 20 32 31 39 2e
> 4.563888 [D5] read [ 16]: (8 bytes) => 35 20 35 39 2e 39 20 30
> 4.603887 [D5] read [ 24]: (8 bytes) => 30 32 2e 38 20 30 30 37
> 4.635882 [D5] read [ 32]: (8 bytes) => 20 33 36 31 2e 38 20 33
> 4.667878 [D5] read [ 40]: (8 bytes) => 36 31 2e 38 20 32 37 32
> 4.707882 [D5] read [ 48]: (8 bytes) => 2e 39 20 2d 2d 2d 2e 2d
> 4.739885 [D5] read [ 56]: (8 bytes) => 20 30 32 35 2e 32 20 31
> 4.779885 [D5] read [ 64]: (8 bytes) => 30 30 30 30 30 30 30 30
> 4.795884 [D5] read [ 72]: (8 bytes) => 30 30 30 0d 20 32 37 32
> 4.795889 [D3] read: (216.9 59.9 219.5 59.9 002.8 007 361.8
> 361.8 272.9 ---.- 025.2 100000000000
> 4.795893 [D5] update_status: OL
> 4.795897 [D5] update_status: !LB
> 4.795900 [D5] update_status: !CAL
> 4.795903 [D5] update_status: !FSD
> 4.795911 [D5] send_to_all: SETINFO driver.state "quiet"
> 4.795914 [D5] send_to_all: SETINFO driver.state "dumping"
> 4.795916 [D3] Entering dstate_dump
> battery.charge: 100
> battery.packs: 1
> battery.protection: yes
> battery.runtime: 600
> battery.voltage: 272.9
> battery.voltage.high: 300.00
> battery.voltage.low: 208.00
> battery.voltage.nominal: 240.0
> device.model: G10K
> device.type: ups
> driver.name: nutdrv_qx
> driver.parameter.bypass_when_off: disabled
> driver.parameter.offdelay: 12
> driver.parameter.ondelay: 60
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 10
> driver.parameter.port: auto
> driver.parameter.synchronous: yes
> driver.state: dumping
> driver.version: Windows-v2.8.0-alpha3-1252-g757813e
> driver.version.data: Voltronic 0.07
> driver.version.internal: 0.33
> driver.version.usb: libusb-0.1 (or compat)
> input.current.nominal: 45.0
> input.frequency: 59.9
> input.frequency.nominal: 60.0
> input.phases: 1
> input.transfer.high: 231
> input.transfer.high.max: 244
> input.transfer.high.min: 231
> input.transfer.low: 209
> input.transfer.low.max: 209
> input.transfer.low.min: 196
> input.voltage: 216.9
> input.voltage.nominal: 230.0
> outlet.0.switchable: no
> output.current: 2.8
> output.current.nominal: 45
> output.frequency: 60.0
> output.frequency.nominal: 60.0
> output.phases: 1
> output.powerfactor: 0.8
> output.voltage: 220.4
> output.voltage.nominal: 220.0
> ups.beeper.status: enabled
> ups.delay.shutdown: 12
> ups.delay.start: 60
> ups.firmware: 00077.13
> ups.firmware.aux: P02
> ups.load: 7
> ups.power.nominal: 10000
> ups.productid: 5161
> ups.start.auto: yes
> ups.status: OL
> ups.temperature: 25.2
> ups.type: online
> ups.vendorid: 0665
> 4.795978 [D5] send_to_all: SETINFO driver.state "cleanup.upsdrv"
> 4.795980 [D1] upsdrv_cleanup...
> 4.796001 [D5] send_to_all: SETINFO driver.state "cleanup.exit"
>
> 3KV:
> >./nutdrv_qx -a ftups -DDDDDD -d1
> Network UPS Tools - Generic Q* USB/Serial driver 0.33
> (Windows-v2.8.0-alpha3-1252-g757813e)
> USB communication driver (libusb 0.1) 0.44
> 0.000000 [D1] debug level is '6'
> 0.001398 [D1] Succeeded to become_user(nut): now UID=57 GID=57
> 0.001425 [D5] send_to_all: SETINFO device.type "ups"
> 0.001439 [D5] send_to_all: SETINFO driver.state "init.device"
> 0.001446 [D1] upsdrv_initups...
> 0.004450 [D3] usb_busses=0x16ed520
> 0.004462 [D2] Checking device (0665/5161) (002/004)
> 0.004485 [D2] - VendorID: 0665
> 0.004493 [D2] - ProductID: 5161
> 0.004497 [D2] - Manufacturer: unknown
> 0.004501 [D2] - Product: unknown
> 0.004507 [D2] - Serial Number: unknown
> 0.004512 [D2] - Bus: 002
> 0.004518 [D2] - Device: 004
> 0.004523 [D2] - Device release number: 0002
> 0.004535 [D2] Trying to match device
> 0.004540 [D3] match_function_regex: matching a device...
> 0.004546 [D2] Device matches
> 0.004579 [D3] nut_usb_set_altinterface: skipped
> usb_set_altinterface(udev, 0)
> 0.004589 [D5] send_to_all: SETINFO ups.vendorid "0665"
> 0.004596 [D5] send_to_all: SETINFO ups.productid "5161"
> 0.006922 [D3] send: QGS
> 0.071746 [D5] read [ 0]: (8 bytes) => 28 31 31 32 2e 30 20 35
> 0.103746 [D5] read [ 8]: (8 bytes) => 39 2e 39 20 31 30 39 2e
> 0.143746 [D5] read [ 16]: (8 bytes) => 36 20 36 30 2e 30 20 30
> 0.175758 [D5] read [ 24]: (8 bytes) => 30 35 2e 32 20 30 31 39
> 0.215704 [D5] read [ 32]: (8 bytes) => 20 31 38 31 2e 39 20 31
> 0.255745 [D5] read [ 40]: (8 bytes) => 38 31 2e 37 20 30 38 32
> 0.295743 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
> 0.359735 [D5] read [ 56]: (8 bytes) => 20 30 31 37 2e 33 20 31
> 0.399731 [D5] read [ 64]: (8 bytes) => 30 30 30 30 30 30 30 30
> 0.415732 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
> 0.415742 [D3] read: (112.0 59.9 109.6 60.0 005.2 019 181.9
> 181.7 082.1 ---.- 017.3 100000000001
> 0.415780 [D5] send_to_all: SETINFO input.voltage "112.0"
> 0.418233 [D3] send: QPI
> 0.471737 [D5] read [ 0]: (8 bytes) => 28 50 49 30 31 0d 00 00
> 0.471746 [D3] read: (PI01
> 0.471830 [D5] send_to_all: SETINFO ups.firmware.aux "P01"
> 0.471847 Using protocol: Voltronic 0.07
> 0.471854 [D5] send_to_all: SETINFO driver.state "init.quiet"
> 0.471863 [D5] send_to_all: SETINFO driver.version
> "Windows-v2.8.0-alpha3-1252-g757813e"
> 0.471870 [D5] send_to_all: SETINFO driver.version.internal "0.33"
> 0.471877 [D5] send_to_all: SETINFO driver.name "nutdrv_qx"
> 0.471884 [D5] send_to_all: SETINFO driver.state "init.info"
> 0.471889 [D1] upsdrv_initinfo...
> 0.471895 [D5] send_to_all: SETINFO driver.version.data "Voltronic
> 0.07"
> 0.474546 [D3] send: QRI
> 0.535733 [D5] read [ 0]: (8 bytes) => 28 31 31 30 2e 30 20 30
> 0.575671 [D5] read [ 8]: (8 bytes) => 32 37 20 30 37 32 2e 30
> 0.599742 [D5] read [ 16]: (8 bytes) => 20 36 30 2e 30 0d 00 00
> 0.599752 [D3] read: (110.0 027 072.0 60.0
> 0.599768 [D5] send_to_all: SETINFO output.voltage.nominal "110.0"
> 0.599790 [D5] send_to_all: SETINFO output.current.nominal "27"
> 0.599800 [D5] send_to_all: SETINFO battery.voltage.nominal "72.0"
> 0.599815 [D5] send_to_all: SETINFO output.frequency.nominal "60.0"
> 0.602586 [D3] send: QMD
> 0.663734 [D5] read [ 0]: (8 bytes) => 28 23 23 23 23 23 23 23
> 0.695734 [D5] read [ 8]: (8 bytes) => 23 23 23 23 23 23 33 4b
> 0.735756 [D5] read [ 16]: (8 bytes) => 20 23 23 23 33 30 30 30
> 0.775726 [D5] read [ 24]: (8 bytes) => 20 38 30 20 31 2f 31 20
> 0.839731 [D5] read [ 32]: (8 bytes) => 31 31 30 20 31 31 30 20
> 0.879779 [D5] read [ 40]: (8 bytes) => 30 36 20 31 32 2e 30 0d
> 0.879789 [D3] read: (#############3K ###3000 80 1/1 110 110 06 12.0
> 0.879801 [D5] send_to_all: SETINFO device.model "3K"
> 0.879811 [D5] send_to_all: SETINFO ups.power.nominal "3000"
> 0.879822 [D5] send_to_all: SETINFO output.powerfactor "0.8"
> 0.879839 [D5] send_to_all: SETINFO input.phases "1"
> 0.879849 [D5] send_to_all: SETINFO output.phases "1"
> 0.879861 [D5] send_to_all: SETINFO input.voltage.nominal "110.0"
> 0.882293 [D3] send: F
> 0.935727 [D5] read [ 0]: (8 bytes) => 23 31 31 30 2e 30 20 30
> 0.975673 [D5] read [ 8]: (8 bytes) => 32 37 20 30 37 32 2e 30
> 0.999744 [D5] read [ 16]: (8 bytes) => 20 36 30 2e 30 0d 00 00
> 0.999753 [D3] read: #110.0 027 072.0 60.0
> 0.999770 [D5] send_to_all: SETINFO input.current.nominal "27.0"
> 0.999797 [D5] send_to_all: SETINFO input.frequency.nominal "60.0"
> 1.002589 [D3] send: QMF
> 1.055728 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
> 1.055738 [D3] read: (NAK
> 1.055743 [D2] qx_process_answer: query rejected by the UPS
> (device.mfr)
> 1.057829 [D3] send: QVFW
> 1.119731 [D5] read [ 0]: (8 bytes) => 28 56 45 52 46 57 3a 30
> 1.159735 [D5] read [ 8]: (8 bytes) => 30 32 30 34 2e 30 36 0d
> 1.159744 [D3] read: (VERFW:00204.06
> 1.159752 [D5] send_to_all: SETINFO ups.firmware "00204.06"
> 1.161839 [D3] send: QID
> 1.223728 [D5] read [ 0]: (8 bytes) => 28 30 30 30 30 30 30 30
> 1.263662 [D5] read [ 8]: (8 bytes) => 30 30 30 30 30 30 30 0d
> 1.263671 [D3] read: (00000000000000
> 1.263677 device.serial: UPS reported a non-significant serial
> [00000000000000]
> 1.263681 [D4] ups_infoval_set: failed to preprocess value
> [device.serial: 00000000000000]
> 1.265586 [D3] send: I
> 1.319693 [D5] read [ 0]: (8 bytes) => 23 20 20 20 20 20 20 20
> 1.359732 [D5] read [ 8]: (8 bytes) => 20 20 20 20 20 20 20 20
> 1.391737 [D5] read [ 16]: (8 bytes) => 20 4c 56 20 33 4b 20 20
> 1.431728 [D5] read [ 24]: (8 bytes) => 20 20 20 20 30 30 32 30
> 1.463727 [D5] read [ 32]: (8 bytes) => 34 2e 30 36 20 20 0d 00
> 1.463735 [D3] read: # LV 3K 00204.06
> 1.463741 [D1] ups_infoval_set: non significant value [device.mfr]
> 1.466024 [D3] send: QGS
> 1.527728 [D5] read [ 0]: (8 bytes) => 28 31 31 31 2e 39 20 35
> 1.559685 [D5] read [ 8]: (8 bytes) => 39 2e 39 20 31 30 39 2e
> 1.607694 [D5] read [ 16]: (8 bytes) => 37 20 35 39 2e 39 20 30
> 1.639730 [D5] read [ 24]: (8 bytes) => 30 36 2e 30 20 30 31 39
> 1.679727 [D5] read [ 32]: (8 bytes) => 20 31 38 31 2e 39 20 31
> 1.719718 [D5] read [ 40]: (8 bytes) => 38 31 2e 34 20 30 38 32
> 1.759747 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
> 1.791722 [D5] read [ 56]: (8 bytes) => 20 30 31 37 2e 33 20 31
> 1.831787 [D5] read [ 64]: (8 bytes) => 30 30 30 30 30 30 30 30
> 1.847731 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
> 1.847741 [D3] read: (111.9 59.9 109.7 59.9 006.0 019 181.9
> 181.4 082.1 ---.- 017.3 100000000001
> 1.847777 [D5] send_to_all: SETINFO input.frequency "59.9"
> 1.847790 [D5] send_to_all: SETINFO output.voltage "109.7"
> 1.847801 [D5] send_to_all: SETINFO output.frequency "59.9"
> 1.847815 [D5] send_to_all: SETINFO output.current "6.0"
> 1.847825 [D5] send_to_all: SETINFO ups.load "19"
> 1.847842 [D5] send_to_all: SETINFO battery.voltage "082.1"
> 1.847852 [D5] send_to_all: SETINFO ups.temperature "17.3"
> 1.847868 [D5] send_to_all: SETINFO ups.type "online"
> 1.847876 [D5] update_status: OL
> 1.847884 [D5] update_status: !LB
> 1.847896 [D5] update_status: !CAL
> 1.847915 [D5] update_status: !FSD
> 1.847925 [D5] send_to_all: SETINFO ups.beeper.status "enabled"
> 1.850541 [D3] send: QMOD
> 1.895719 [D5] read [ 0]: (8 bytes) => 28 4c 0d 00 00 00 00 00
> 1.895728 [D3] read: (L
> 1.895735 [D5] update_status: OL
> 1.897650 [D3] send: QWS
> 1.959728 [D5] read [ 0]: (8 bytes) => 28 30 30 30 30 30 30 30
> 1.991723 [D5] read [ 8]: (8 bytes) => 30 30 30 30 30 30 30 30
> 2.031725 [D5] read [ 16]: (8 bytes) => 30 30 30 30 30 30 30 30
> 2.063728 [D5] read [ 24]: (8 bytes) => 30 30 30 30 30 30 30 30
> 2.111710 [D5] read [ 32]: (8 bytes) => 30 30 30 30 30 30 30 30
> 2.143679 [D5] read [ 40]: (8 bytes) => 30 30 30 30 30 30 30 30
> 2.183721 [D5] read [ 48]: (8 bytes) => 30 30 30 30 30 30 30 30
> 2.215694 [D5] read [ 56]: (8 bytes) => 30 30 30 30 30 30 30 30
> 2.223724 [D5] read [ 64]: (8 bytes) => 30 0d 00 00 00 00 00 00
> 2.223733 [D3] read:
> (0000000000000000000000000000000000000000000000000000000000000000
> 2.225774 [D3] send: QBV
> 2.287722 [D5] read [ 0]: (8 bytes) => 28 30 38 32 2e 30 20 30
> 2.343726 [D5] read [ 8]: (8 bytes) => 36 20 30 31 20 31 30 30
> 2.367729 [D5] read [ 16]: (8 bytes) => 20 30 34 33 0d 00 00 00
> 2.367738 [D3] read: (082.0 06 01 100 043
> 2.367747 battery_number: 6
> 2.367771 battery_number, settable range: 1..9
> 2.367784 [D5] send_to_all: SETINFO battery.packs "1"
> 2.367791 [D5] send_to_all: SETFLAGS battery.packs RW
> 2.367797 [D5] send_to_all: ADDRANGE battery.packs 1 99
> 2.367802 [D5] send_to_all: SETFLAGS battery.packs RW NUMBER
> 2.367811 [D5] send_to_all: SETINFO battery.charge "100"
> 2.367822 [D5] send_to_all: SETINFO battery.runtime "2580"
> 2.370574 [D3] send: QLDL
> 2.439727 [D5] read [ 0]: (8 bytes) => 28 30 31 38 20 30 31 39
> 2.447733 [D5] read [ 8]: (8 bytes) => 0d 00 00 00 00 00 00 00
> 2.447742 [D3] read: (018 019
> 2.447759 [D5] send_to_all: SETINFO output.power.minimum.percent "18"
> 2.447767 [D5] send_to_all: SETINFO output.power.maximum.percent "19"
> 2.450508 [D3] send: QFLAG
> 2.519703 [D5] read [ 0]: (8 bytes) => 28 45 70 62 72 61 73 68
> 2.567706 [D5] read [ 8]: (8 bytes) => 63 7a 44 6f 76 65 67 66
> 2.591737 [D5] read [ 16]: (8 bytes) => 6a 6c 6d 0d 00 00 00 00
> 2.591747 [D3] read: (EpbrashczDovegfjlm
> 2.591775 [D5] send_to_all: SETINFO ups.start.auto "yes"
> 2.591793 [D5] send_to_all: SETFLAGS ups.start.auto RW
> 2.591800 [D5] send_to_all: ADDENUM ups.start.auto "no"
> 2.591808 [D5] send_to_all: ADDENUM ups.start.auto "yes"
> 2.591818 [D5] send_to_all: SETINFO battery.protection "yes"
> 2.591825 [D5] send_to_all: SETFLAGS battery.protection RW
> 2.591831 [D5] send_to_all: ADDENUM battery.protection "no"
> 2.591838 [D5] send_to_all: ADDENUM battery.protection "yes"
> 2.591863 [D5] send_to_all: SETINFO battery.energysave "no"
> 2.591870 [D5] send_to_all: SETFLAGS battery.energysave RW
> 2.591876 [D5] send_to_all: ADDENUM battery.energysave "no"
> 2.591883 [D5] send_to_all: ADDENUM battery.energysave "yes"
> 2.591897 [D5] send_to_all: SETINFO ups.start.battery "yes"
> 2.591904 [D5] send_to_all: SETFLAGS ups.start.battery RW
> 2.591912 [D5] send_to_all: ADDENUM ups.start.battery "no"
> 2.591918 [D5] send_to_all: ADDENUM ups.start.battery "yes"
> 2.591929 [D5] send_to_all: SETINFO outlet.0.switchable "no"
> 2.591935 [D5] send_to_all: SETFLAGS outlet.0.switchable RW
> 2.591942 [D5] send_to_all: ADDENUM outlet.0.switchable "no"
> 2.591949 [D5] send_to_all: ADDENUM outlet.0.switchable "yes"
> 2.591956 bypass_alarm: enabled
> 2.591966 battery_alarm: enabled
> 2.591981 bypass_when_off: disabled
> 2.592003 alarm_control: enabled
> 2.592012 converter_mode: disabled
> 2.592045 eco_mode: disabled
> 2.592053 [D4] ups_infoval_set: failed to preprocess value
> [battery_open_status_check: EpbrashczDovegfjlm]
> 2.592062 bypass_forbidding: disabled
> 2.592077 site_fault_detection: disabled
> 2.592084 [D4] ups_infoval_set: failed to preprocess value
> [advanced_eco_mode: EpbrashczDovegfjlm]
> 2.592092 [D4] ups_infoval_set: failed to preprocess value
> [constant_phase_angle: EpbrashczDovegfjlm]
> 2.592100 [D4] ups_infoval_set: failed to preprocess value
> [limited_runtime_on_battery: EpbrashczDovegfjlm]
> 2.592110 setvar(bypass_when_off, disabled)
> 2.592116 bypass_when_off is already disabled
> 2.592122 setvar: FAILED
> 2.594532 [D3] send: QHE
> 2.655731 [D5] read [ 0]: (8 bytes) => 28 31 31 36 20 31 30 34
> 2.663729 [D5] read [ 8]: (8 bytes) => 0d 00 00 00 00 00 00 00
> 2.663738 [D3] read: (116 104
> 2.663775 [D5] send_to_all: SETINFO input.transfer.high "116"
> 2.663785 [D5] send_to_all: SETFLAGS input.transfer.high RW
> 2.663792 [D5] send_to_all: ADDRANGE input.transfer.high 113 122
> 2.663798 [D5] send_to_all: SETFLAGS input.transfer.high RW NUMBER
> 2.663813 [D5] send_to_all: SETINFO input.transfer.low "104"
> 2.663820 [D5] send_to_all: SETFLAGS input.transfer.low RW
> 2.663827 [D5] send_to_all: ADDRANGE input.transfer.low 98 107
> 2.663834 [D5] send_to_all: SETFLAGS input.transfer.low RW NUMBER
> 2.663841 [D5] send_to_all: SETINFO input.transfer.low.min "98"
> 2.663851 [D5] send_to_all: SETINFO input.transfer.low.max "107"
> 2.663861 [D5] send_to_all: SETINFO input.transfer.high.min "113"
> 2.663871 [D5] send_to_all: SETINFO input.transfer.high.max "122"
> 2.666579 [D3] send: QFRE
> 2.719726 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
> 2.719735 [D3] read: (NAK
> 2.719740 [D2] qx_process_answer: query rejected by the UPS
> (input.frequency.high)
> 2.719745 [D2] qx_process_answer: query rejected by the UPS
> (input.frequency.low)
> 2.722576 [D3] send: QBYV
> 2.791725 [D5] read [ 0]: (8 bytes) => 28 31 33 32 20 30 38 35
> 2.799726 [D5] read [ 8]: (8 bytes) => 0d 00 00 00 00 00 00 00
> 2.799735 [D3] read: (132 085
> 2.799743 max_bypass_volt: 132
> 2.799750 max_bypass_volt, settable range: 120..140
> 2.799770 min_bypass_volt: 85
> 2.799779 min_bypass_volt, settable range: 85..115
> 2.802578 [D3] send: QBYF
> 2.871702 [D5] read [ 0]: (8 bytes) => 28 36 33 2e 30 20 35 37
> 2.879682 [D5] read [ 8]: (8 bytes) => 2e 30 0d 00 00 00 00 00
> 2.879691 [D3] read: (63.0 57.0
> 2.879699 max_bypass_freq: 63.0
> 2.879706 max_bypass_freq, settable range: 61.0..70.0
> 2.879731 min_bypass_freq: 57.0
> 2.879742 min_bypass_freq, settable range: 50.0..59.0
> 2.879753 [D2] setvar: nothing to do... [battery_number]
> 2.881579 [D3] send: RE0
> 2.935705 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
> 2.935720 [D3] read: (NAK
> 2.935732 [D2] qx_process_answer: query rejected by the UPS
> (battery.voltage.low)
> 2.937709 [D3] send: QPD
> 2.991705 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
> 2.991721 [D3] read: (NAK
> 2.991731 [D2] qx_process_answer: query rejected by the UPS
> (input_phase_angle)
> 2.991737 [D2] qx_process_answer: query rejected by the UPS
> (output_phase_angle)
> 2.994569 [D3] send: QPAR
> 3.047721 [D5] read [ 0]: (8 bytes) => 28 4e 41 4b 0d 00 00 00
> 3.047731 [D3] read: (NAK
> 3.047735 [D2] qx_process_answer: query rejected by the UPS
> (voltronic_parallel)
> 3.047747 [D5] send_to_all: ADDCMD load.off
> 3.047764 [D5] send_to_all: ADDCMD load.on
> 3.047771 [D5] send_to_all: ADDCMD shutdown.return
> 3.047777 [D5] send_to_all: ADDCMD shutdown.stayoff
> 3.047784 [D5] send_to_all: ADDCMD shutdown.stop
> 3.047791 [D5] send_to_all: ADDCMD test.battery.start
> 3.047797 [D5] send_to_all: ADDCMD test.battery.start.deep
> 3.047804 [D5] send_to_all: ADDCMD test.battery.start.quick
> 3.047811 [D5] send_to_all: ADDCMD test.battery.stop
> 3.047816 [D5] send_to_all: ADDCMD beeper.toggle
> 3.047823 [D5] send_to_all: ADDCMD beeper.enable
> 3.047827 [D5] send_to_all: ADDCMD beeper.disable
> 3.047833 [D5] send_to_all: ADDCMD bypass.start
> 3.047838 [D5] send_to_all: ADDCMD bypass.stop
> 3.047845 [D5] send_to_all: SETINFO ups.delay.start "180"
> 3.047850 [D5] send_to_all: SETFLAGS ups.delay.start RW
> 3.047858 [D5] send_to_all: ADDRANGE ups.delay.start 0 599940
> 3.047864 [D5] send_to_all: SETFLAGS ups.delay.start RW NUMBER
> 3.047872 [D5] send_to_all: SETINFO ups.delay.shutdown "30"
> 3.047878 [D5] send_to_all: SETFLAGS ups.delay.shutdown RW
> 3.047885 [D5] send_to_all: ADDRANGE ups.delay.shutdown 12 5940
> 3.047892 [D5] send_to_all: SETFLAGS ups.delay.shutdown RW NUMBER
> 3.047899 No values for battery high/low voltages
> 3.047907 [D5] send_to_all: SETINFO battery.voltage.low "62.40"
> 3.047915 [D5] send_to_all: SETINFO battery.voltage.high "90.00"
> 3.047922 Using 'guesstimation' (low: 62.400000, high: 90.000000)!
> 3.047933 setvar(ups.delay.start, 60)
> 3.047942 [D2] setvar: setting server side variable ups.delay.start
> 3.047961 [D5] send_to_all: SETINFO ups.delay.start "60"
> 3.047966 setvar: SUCCEED
> 3.047974 setvar(ups.delay.shutdown, 30)
> 3.047980 setvar: nothing to do... [ups.delay.shutdown]
> 3.047991 [D5] send_to_all: SETINFO driver.parameter.pollfreq "30"
> 3.048002 [D5] send_to_all: SETINFO driver.state "init.updateinfo"
> 3.048008 [D1] upsdrv_updateinfo...
> 3.048014 [D1] Quick update...
> 3.050576 [D3] send: QGS
> 3.119624 [D5] read [ 0]: (8 bytes) => 28 31 31 32 2e 31 20 35
> 3.151706 [D5] read [ 8]: (8 bytes) => 39 2e 39 20 31 30 39 2e
> 3.191707 [D5] read [ 16]: (8 bytes) => 34 20 35 39 2e 39 20 30
> 3.231641 [D5] read [ 24]: (8 bytes) => 30 35 2e 32 20 30 31 38
> 3.263696 [D5] read [ 32]: (8 bytes) => 20 31 38 32 2e 33 20 31
> 3.335720 [D5] read [ 40]: (8 bytes) => 38 31 2e 37 20 30 38 32
> 3.367710 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
> 3.407696 [D5] read [ 56]: (8 bytes) => 20 30 31 37 2e 33 20 31
> 3.439702 [D5] read [ 64]: (8 bytes) => 30 30 30 30 30 30 30 30
> 3.463711 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
> 3.463726 [D3] read: (112.1 59.9 109.4 59.9 005.2 018 182.3
> 181.7 082.1 ---.- 017.3 100000000001
> 3.463732 [D5] update_status: OL
> 3.463737 [D5] update_status: !LB
> 3.463742 [D5] update_status: !CAL
> 3.463759 [D5] update_status: !FSD
> 3.463768 [D5] send_to_all: SETINFO ups.status "OL"
> 3.463775 [D5] send_to_all: DATAOK
> 3.463781 [D5] send_to_all: SETINFO driver.state "init.quiet"
> 3.463789 [D5] send_to_all: SETINFO driver.parameter.pollinterval
> "10"
> 3.463796 [D5] send_to_all: SETINFO driver.parameter.synchronous
> "yes"
> 3.463804 [D5] send_to_all: SETINFO driver.state "quiet"
> 3.463810 [D1] Driver initialization completed, beginning data
> dump (1 loops)
> 3.463823 [D5] send_to_all: SETINFO driver.state "updateinfo"
> 3.463829 [D1] upsdrv_updateinfo...
> 3.463835 [D1] Quick update...
> 3.465994 [D3] send: QGS
> 3.527682 [D5] read [ 0]: (8 bytes) => 28 31 31 32 2e 30 20 35
> 3.567709 [D5] read [ 8]: (8 bytes) => 39 2e 39 20 31 30 39 2e
> 3.599709 [D5] read [ 16]: (8 bytes) => 35 20 35 39 2e 39 20 30
> 3.639706 [D5] read [ 24]: (8 bytes) => 30 35 2e 32 20 30 31 39
> 3.679721 [D5] read [ 32]: (8 bytes) => 20 31 38 32 2e 34 20 31
> 3.719719 [D5] read [ 40]: (8 bytes) => 38 31 2e 36 20 30 38 32
> 3.751702 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
> 3.815719 [D5] read [ 56]: (8 bytes) => 20 30 31 37 2e 33 20 31
> 3.855707 [D5] read [ 64]: (8 bytes) => 30 30 30 30 30 30 30 30
> 3.871704 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
> 3.871719 [D3] read: (112.0 59.9 109.5 59.9 005.2 019 182.4
> 181.6 082.1 ---.- 017.3 100000000001
> 3.871725 [D5] update_status: OL
> 3.871730 [D5] update_status: !LB
> 3.871734 [D5] update_status: !CAL
> 3.871751 [D5] update_status: !FSD
> 3.871759 [D5] send_to_all: SETINFO driver.state "quiet"
> 3.871765 [D5] send_to_all: SETINFO driver.state "updateinfo"
> 3.871771 [D1] upsdrv_updateinfo...
> 3.871776 [D1] Quick update...
> 3.874334 [D3] send: QGS
> 3.935702 [D5] read [ 0]: (8 bytes) => 28 31 31 32 2e 31 20 35
> 3.975637 [D5] read [ 8]: (8 bytes) => 39 2e 39 20 31 30 39 2e
> 4.007635 [D5] read [ 16]: (8 bytes) => 36 20 35 39 2e 39 20 30
> 4.047703 [D5] read [ 24]: (8 bytes) => 30 35 2e 33 20 30 31 38
> 4.079697 [D5] read [ 32]: (8 bytes) => 20 31 38 32 2e 30 20 31
> 4.119683 [D5] read [ 40]: (8 bytes) => 38 31 2e 36 20 30 38 32
> 4.151690 [D5] read [ 48]: (8 bytes) => 2e 31 20 2d 2d 2d 2e 2d
> 4.191696 [D5] read [ 56]: (8 bytes) => 20 30 31 37 2e 33 20 31
> 4.231651 [D5] read [ 64]: (8 bytes) => 30 30 30 30 30 30 30 30
> 4.247736 [D5] read [ 72]: (8 bytes) => 30 30 31 0d 00 00 00 00
> 4.247746 [D3] read: (112.1 59.9 109.6 59.9 005.3 018 182.0
> 181.6 082.1 ---.- 017.3 100000000001
> 4.247757 [D5] update_status: OL
> 4.247764 [D5] update_status: !LB
> 4.247781 [D5] update_status: !CAL
> 4.247786 [D5] update_status: !FSD
> 4.247803 [D5] send_to_all: SETINFO driver.state "quiet"
> 4.247810 [D5] send_to_all: SETINFO driver.state "dumping"
> 4.247815 [D3] Entering dstate_dump
> battery.charge: 100
> battery.energysave: no
> battery.packs: 1
> battery.protection: yes
> battery.runtime: 2580
> battery.voltage: 082.1
> battery.voltage.high: 90.00
> battery.voltage.low: 62.40
> battery.voltage.nominal: 72.0
> device.model: 3K
> device.type: ups
> driver.name: nutdrv_qx
> driver.parameter.bypass_when_off: disabled
> driver.parameter.offdelay: 30
> driver.parameter.ondelay: 60
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 10
> driver.parameter.port: auto
> driver.parameter.synchronous: yes
> driver.state: dumping
> driver.version: Windows-v2.8.0-alpha3-1252-g757813e
> driver.version.data: Voltronic 0.07
> driver.version.internal: 0.33
> driver.version.usb: libusb-0.1 (or compat)
> input.current.nominal: 27.0
> input.frequency: 59.9
> input.frequency.nominal: 60.0
> input.phases: 1
> input.transfer.high: 116
> input.transfer.high.max: 122
> input.transfer.high.min: 113
> input.transfer.low: 104
> input.transfer.low.max: 107
> input.transfer.low.min: 98
> input.voltage: 112.0
> input.voltage.nominal: 110.0
> outlet.0.switchable: no
> output.current: 6.0
> output.current.nominal: 27
> output.frequency: 59.9
> output.frequency.nominal: 60.0
> output.phases: 1
> output.power.maximum.percent: 19
> output.power.minimum.percent: 18
> output.powerfactor: 0.8
> output.voltage: 109.7
> output.voltage.nominal: 110.0
> ups.beeper.status: enabled
> ups.delay.shutdown: 30
> ups.delay.start: 60
> ups.firmware: 00204.06
> ups.firmware.aux: P01
> ups.load: 19
> ups.power.nominal: 3000
> ups.productid: 5161
> ups.start.auto: yes
> ups.start.battery: yes
> ups.status: OL
> ups.temperature: 17.3
> ups.type: online
> ups.vendorid: 0665
> 4.247957 [D5] send_to_all: SETINFO driver.state "cleanup.upsdrv"
> 4.247964 [D1] upsdrv_cleanup...
> 4.248000 [D5] send_to_all: SETINFO driver.state "cleanup.exit"
>
> 2KV:
> >./nutdrv_qx -a ftups -DDDDDD -d1
> Network UPS Tools - Generic Q* USB/Serial driver 0.33
> (Windows-v2.8.0-alpha3-1252-g757813e)
> USB communication driver (libusb 0.1) 0.44
> 0.000000 [D1] debug level is '6'
> 0.000741 [D1] Succeeded to become_user(nut): now UID=57 GID=57
> 0.000767 [D5] send_to_all: SETINFO device.type "ups"
> 0.000787 [D5] send_to_all: SETINFO driver.state "init.device"
> 0.000797 [D1] upsdrv_initups...
> 0.005897 [D3] usb_busses=0x1c571b0
> 0.005925 [D2] Checking device (046D/C31D) (002/006)
> 0.005975 [D1] Failed to open device (046D/C31D), skipping:
> Permission denied
> 0.005998 [D2] Checking device (15D9/0A4F) (002/005)
> 0.006017 [D1] Failed to open device (15D9/0A4F), skipping:
> Permission denied
> 0.006028 [D2] Checking device (1A40/0101) (002/004)
> 0.006044 [D1] Failed to open device (1A40/0101), skipping:
> Permission denied
> 0.006054 [D2] Checking device (0665/5161) (002/003)
> 0.006809 [D1] libusb_open get iManufacturer failed, retrying...
> 0.010168 [D2] - VendorID: 0665
> 0.010191 [D2] - ProductID: 5161
> 0.010201 [D2] - Manufacturer: INNO TECH
> 0.010209 [D2] - Product: USB to Serial
> 0.010217 [D2] - Serial Number: unknown
> 0.010225 [D2] - Bus: 002
> 0.010233 [D2] - Device: 003
> 0.010241 [D2] - Device release number: 0002
> 0.010249 [D2] Trying to match device
> 0.010258 [D3] match_function_regex: matching a device...
> 0.010268 [D2] Device matches
> 0.010304 [D3] nut_usb_set_altinterface: skipped
> usb_set_altinterface(udev, 0)
> 0.010322 [D5] send_to_all: SETINFO ups.vendorid "0665"
> 0.010334 [D5] send_to_all: SETINFO ups.productid "5161"
> 0.011139 [D3] send: QGS
> 0.154938 [D5] read [ 0]: (8 bytes) => 51 47 53 0d 00 00 00 00
> 0.154969 [D3] read: QGS
> 0.154996 [D2] qx_process_answer: short reply (input.voltage)
> 0.155673 [D3] send: QGS
> 0.298945 [D5] read [ 0]: (8 bytes) => 51 47 53 0d 00 00 00 00
> 0.298992 [D3] read: QGS
> 0.299006 [D2] qx_process_answer: short reply (input.voltage)
> 0.299794 [D3] send: QGS
> 0.443936 [D5] read [ 0]: (8 bytes) => 51 47 53 0d 00 00 00 00
> 0.443990 [D3] read: QGS
> 0.444019 [D2] qx_process_answer: short reply (input.voltage)
> 0.444777 [D3] send: M
> 0.568954 [D5] read [ 0]: (8 bytes) => 56 0d 00 00 00 00 00 00
> 0.569023 [D3] read: V
> 0.569077 [D2] voltronic_qs_protocol: detected V protocol [V]
> 0.569115 [D5] send_to_all: SETINFO ups.firmware.aux "PM-V"
> 0.569807 [D3] send: QS
> 0.620945 [D5] read [ 0]: (8 bytes) => 28 31 32 31 2e 38 20 31
> 0.653944 [D5] read [ 8]: (8 bytes) => 32 30 2e 37 20 31 30 32
> 0.686967 [D5] read [ 16]: (8 bytes) => 2e 33 20 30 33 32 20 36
> 0.719956 [D5] read [ 24]: (8 bytes) => 30 2e 32 20 31 33 2e 35
> 0.752941 [D5] read [ 32]: (8 bytes) => 20 2d 2d 2e 2d 20 30 30
> 0.885947 [D5] read [ 40]: (8 bytes) => 31 30 31 30 30 31 0d 00
> 0.886001 [D3] read: (121.8 120.7 102.3 032 60.2 13.5 --.- 00101001
> 0.886086 [D5] send_to_all: SETINFO input.voltage "121.8"
> 0.886116 Using protocol: Voltronic-QS 0.09
> 0.886146 [D5] send_to_all: SETINFO driver.state "init.quiet"
> 0.886191 [D5] send_to_all: SETINFO driver.version
> "Windows-v2.8.0-alpha3-1252-g757813e"
> 0.886221 [D5] send_to_all: SETINFO driver.version.internal "0.33"
> 0.886250 [D5] send_to_all: SETINFO driver.name "nutdrv_qx"
> 0.886279 [D5] send_to_all: SETINFO driver.state "init.info"
> 0.886310 [D1] upsdrv_initinfo...
> 0.886353 [D5] send_to_all: SETINFO driver.version.data
> "Voltronic-QS 0.09"
> 0.887174 [D3] send: QS
> 0.937952 [D5] read [ 0]: (8 bytes) => 28 31 32 30 2e 37 20 31
> 0.970963 [D5] read [ 8]: (8 bytes) => 32 30 2e 36 20 31 30 33
> 1.003970 [D5] read [ 16]: (8 bytes) => 2e 32 20 30 33 33 20 36
> 1.036953 [D5] read [ 24]: (8 bytes) => 30 2e 32 20 31 33 2e 35
> 1.070969 [D5] read [ 32]: (8 bytes) => 20 2d 2d 2e 2d 20 30 30
> 1.203956 [D5] read [ 40]: (8 bytes) => 31 30 31 30 30 31 0d 00
> 1.204016 [D3] read: (120.7 120.6 103.2 033 60.2 13.5 --.- 00101001
> 1.204064 [D5] send_to_all: SETINFO input.voltage.fault "120.6"
> 1.204126 [D5] send_to_all: SETINFO output.voltage "103.2"
> 1.204165 [D5] send_to_all: SETINFO ups.load "33"
> 1.204231 [D5] send_to_all: SETINFO output.frequency "60.2"
> 1.204269 [D5] send_to_all: SETINFO battery.voltage "13.5"
> 1.204326 [D2] ups_infoval_set: non numerical value
> [ups.temperature: --.-]
> 1.204358 [D5] update_status: OL
> 1.204388 [D5] update_status: !LB
> 1.204429 [D5] update_status: TRIM
> 1.204476 [D5] send_to_all: SETINFO ups.type "offline / line
> interactive"
> 1.204510 [D5] update_status: !CAL
> 1.204577 [D5] update_status: !FSD
> 1.204613 [D5] send_to_all: SETINFO ups.beeper.status "enabled"
> 1.205300 [D3] send: F
> 1.249958 [D5] read [ 0]: (8 bytes) => 23 31 31 30 2e 30 20 30
> 1.283966 [D5] read [ 8]: (8 bytes) => 30 36 20 31 32 2e 30 30
> 1.412963 [D5] read [ 16]: (8 bytes) => 20 36 30 2e 30 0d 00 00
> 1.413022 [D3] read: #110.0 006 12.00 60.0
> 1.413067 [D5] send_to_all: SETINFO output.voltage.nominal "110"
> 1.413115 [D5] send_to_all: SETINFO output.current.nominal "6.0"
> 1.413195 [D5] send_to_all: SETINFO battery.voltage.nominal "12.0"
> 1.413232 [D5] send_to_all: SETINFO output.frequency.nominal "60"
> 1.413288 [D5] send_to_all: ADDCMD beeper.toggle
> 1.413320 [D5] send_to_all: ADDCMD load.off
> 1.413354 [D5] send_to_all: ADDCMD load.on
> 1.413383 [D5] send_to_all: ADDCMD shutdown.return
> 1.413413 [D5] send_to_all: ADDCMD shutdown.stayoff
> 1.413442 [D5] send_to_all: ADDCMD shutdown.stop
> 1.413470 [D5] send_to_all: ADDCMD test.battery.start.quick
> 1.413507 [D5] send_to_all: SETINFO ups.delay.start "180"
> 1.413579 [D5] send_to_all: SETFLAGS ups.delay.start RW
> 1.413615 [D5] send_to_all: ADDRANGE ups.delay.start 60 599940
> 1.413655 [D5] send_to_all: SETFLAGS ups.delay.start RW NUMBER
> 1.413685 [D5] send_to_all: SETINFO ups.delay.shutdown "30"
> 1.413718 [D5] send_to_all: SETFLAGS ups.delay.shutdown RW
> 1.413751 [D5] send_to_all: ADDRANGE ups.delay.shutdown 12 540
> 1.413779 [D5] send_to_all: SETFLAGS ups.delay.shutdown RW NUMBER
> 1.413814 No values for battery high/low voltages
> 1.413846 [D5] send_to_all: SETINFO battery.voltage.low "10.40"
> 1.413883 [D5] send_to_all: SETINFO battery.voltage.high "15.00"
> 1.413911 Using 'guesstimation' (low: 10.400000, high: 15.000000)!
> 1.413944 [D5] send_to_all: SETINFO battery.charge "67"
> 1.413973 Autodetected 1 as number of battery packs [12/13.50]
> 1.413999 Battery runtime will not be calculated (runtimecal not set)
> 1.414030 setvar(ups.delay.start, 60)
> 1.414058 [D2] setvar: setting server side variable ups.delay.start
> 1.414092 [D5] send_to_all: SETINFO ups.delay.start "60"
> 1.414117 setvar: SUCCEED
> 1.414144 setvar(ups.delay.shutdown, 30)
> 1.414170 setvar: nothing to do... [ups.delay.shutdown]
> 1.414201 [D5] send_to_all: SETINFO driver.parameter.pollfreq "30"
> 1.414237 [D5] send_to_all: SETINFO driver.state "init.updateinfo"
> 1.414269 [D1] upsdrv_updateinfo...
> 1.414294 [D1] Quick update...
> 1.414924 [D3] send: QS
> 1.465959 [D5] read [ 0]: (8 bytes) => 28 31 32 30 2e 37 20 31
> 1.498927 [D5] read [ 8]: (8 bytes) => 32 30 2e 36 20 31 30 32
> 1.531968 [D5] read [ 16]: (8 bytes) => 2e 33 20 30 33 33 20 36
> 1.565953 [D5] read [ 24]: (8 bytes) => 30 2e 32 20 31 33 2e 35
> 1.598962 [D5] read [ 32]: (8 bytes) => 20 2d 2d 2e 2d 20 30 30
> 1.731977 [D5] read [ 40]: (8 bytes) => 31 30 31 30 30 31 0d 00
> 1.732034 [D3] read: (120.7 120.6 102.3 033 60.2 13.5 --.- 00101001
> 1.732101 [D5] update_status: OL
> 1.732144 [D5] update_status: !LB
> 1.732178 [D5] update_status: TRIM
> 1.732218 [D5] update_status: !CAL
> 1.732247 [D5] update_status: !FSD
> 1.732281 [D5] send_to_all: SETINFO ups.status "OL TRIM"
> 1.732309 [D5] send_to_all: DATAOK
> 1.732347 [D5] send_to_all: SETINFO driver.state "init.quiet"
> 1.732377 [D5] send_to_all: SETINFO driver.parameter.pollinterval
> "10"
> 1.732418 [D5] send_to_all: SETINFO driver.parameter.synchronous
> "yes"
> 1.732449 [D5] send_to_all: SETINFO driver.state "quiet"
> 1.732475 [D1] Driver initialization completed, beginning data
> dump (1 loops)
> 1.732516 [D5] send_to_all: SETINFO driver.state "updateinfo"
> 1.732573 [D1] upsdrv_updateinfo...
> 1.732623 [D1] Quick update...
> 1.733310 [D3] send: QS
> 1.783966 [D5] read [ 0]: (8 bytes) => 28 31 32 30 2e 36 20 31
> 1.816932 [D5] read [ 8]: (8 bytes) => 32 30 2e 36 20 31 30 32
> 1.849963 [D5] read [ 16]: (8 bytes) => 2e 33 20 30 33 32 20 36
> 1.883966 [D5] read [ 24]: (8 bytes) => 30 2e 32 20 31 33 2e 35
> 1.916969 [D5] read [ 32]: (8 bytes) => 20 2d 2d 2e 2d 20 30 30
> 2.049989 [D5] read [ 40]: (8 bytes) => 31 30 31 30 30 31 0d 00
> 2.050046 [D3] read: (120.6 120.6 102.3 032 60.2 13.5 --.- 00101001
> 2.050112 [D5] update_status: OL
> 2.050153 [D5] update_status: !LB
> 2.050187 [D5] update_status: TRIM
> 2.050217 [D5] update_status: !CAL
> 2.050245 [D5] update_status: !FSD
> 2.050279 [D5] send_to_all: SETINFO driver.state "quiet"
> 2.050309 [D5] send_to_all: SETINFO driver.state "updateinfo"
> 2.050358 [D1] upsdrv_updateinfo...
> 2.050384 [D1] Quick update...
> 2.051194 [D3] send: QS
> 2.101980 [D5] read [ 0]: (8 bytes) => 28 31 32 30 2e 36 20 31
> 2.134979 [D5] read [ 8]: (8 bytes) => 32 31 2e 38 20 31 30 33
> 2.167958 [D5] read [ 16]: (8 bytes) => 2e 32 20 30 33 32 20 36
> 2.201976 [D5] read [ 24]: (8 bytes) => 30 2e 32 20 31 33 2e 35
> 2.234974 [D5] read [ 32]: (8 bytes) => 20 2d 2d 2e 2d 20 30 30
> 2.367963 [D5] read [ 40]: (8 bytes) => 31 30 31 30 30 31 0d 00
> 2.368024 [D3] read: (120.6 121.8 103.2 032 60.2 13.5 --.- 00101001
> 2.368090 [D5] update_status: OL
> 2.368144 [D5] update_status: !LB
> 2.368179 [D5] update_status: TRIM
> 2.368210 [D5] update_status: !CAL
> 2.368239 [D5] update_status: !FSD
> 2.368283 [D5] send_to_all: SETINFO driver.state "quiet"
> 2.368313 [D5] send_to_all: SETINFO driver.state "dumping"
> 2.368349 [D3] Entering dstate_dump
> battery.charge: 67
> battery.voltage: 13.5
> battery.voltage.high: 15.00
> battery.voltage.low: 10.40
> battery.voltage.nominal: 12.0
> device.type: ups
> driver.name: nutdrv_qx
> driver.parameter.bypass_when_off: disabled
> driver.parameter.offdelay: 30
> driver.parameter.ondelay: 60
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 10
> driver.parameter.port: auto
> driver.parameter.synchronous: yes
> driver.state: dumping
> driver.version: Windows-v2.8.0-alpha3-1252-g757813e
> driver.version.data: Voltronic-QS 0.09
> driver.version.internal: 0.33
> driver.version.usb: libusb-0.1 (or compat)
> input.voltage: 121.8
> input.voltage.fault: 120.6
> output.current.nominal: 6.0
> output.frequency: 60.2
> output.frequency.nominal: 60
> output.voltage: 103.2
> output.voltage.nominal: 110
> ups.beeper.status: enabled
> ups.delay.shutdown: 30
> ups.delay.start: 60
> ups.firmware.aux: PM-V
> ups.load: 33
> ups.productid: 5161
> ups.status: OL TRIM
> ups.type: offline / line interactive
> ups.vendorid: 0665
> 2.368829 [D5] send_to_all: SETINFO driver.state "cleanup.upsdrv"
> 2.368859 [D1] upsdrv_cleanup...
> 2.368922 [D5] send_to_all: SETINFO driver.state "cleanup.exit"
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20230905/0dbeaa99/attachment-0001.htm>
More information about the Nut-upsuser
mailing list