[Nut-upsuser] CyberPower PR1500LCDRT2U via serial port

[Jim Klimov]

To clarify, did you connect it with both USB and serial links?

It may be possible that the hardware/firmware prefers one over another, to
avoid ambiguity, and so the serial port is just not listened to?
Just in case, it is fairly easy to check by unplugging the USB. Not sure if
cycling the UPS would be needed...



On Tue, Aug 13, 2024 at 8:38 PM Orion Poplawski via Nut-upsuser <
nut-upsuser at alioth-lists.debian.net> wrote:

> I'm trying to access a Cyber Power PR1500LCDRT2U via the serial port
> (because
> I need the use the USB connection for a windows machine), but not having
> any
> luck with the powerpanel driver.  Any other suggestions?
>
> Thanks!
>
> --
> Orion Poplawski
> he/him/his  - surely the least important thing about me
> Manager of IT Systems                      720-772-5637
> NWRA, Boulder/CoRA Office             FAX: 303-415-9702
> 3380 Mitchell Lane                       orion at nwra.com
> Boulder, CO 80301                 https://www.nwra.com/
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20240813/639f4ba9/attachment.htm>