[Nut-upsuser] Windows NUT Client - Settings description somewhere ?

[edward.ebay]

Hi there,

 

Question: Is there anywhere a description of how to use the settings for
shutdown options in Windows NUT client ?

 

i have successfully set up NUT on a Raspberry which gathers data from a
CyberPower CP1500EPFCLCD.

Have also connected 2 Windows 11 machines and one Synology device tot hat
master, in order read data and to react on powersupply issues. All working
fine.

 

What i am struggeling with are the settings available in Windows NUT Client
about the Shutdown options. My first trial to get the system to hibernate
after a power failure was not successful. Seems to be different possible
settings which may confuse each other.

Is there anywhere a description of how to use the settings for shutdown
options in Windows NUT client ?

 

Current setting see screenshot

 



 

As nothing happened, i did set the first value for battery-threshold to 90%,
(while the batt was below) and that then did immediately react with
hiberate.

 

My preferred setting would be to wait after powerfailure for 1 minute, then
hibernate. Without taking other values into account like batterylevel or
batteryruntime.

 

Any help or information on that would be appreciated.

 

Thanks

Eddie

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20240105/d48c5ded/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 21738 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20240105/d48c5ded/attachment-0001.png>