[Nut-upsuser] New Cyber Power UPS

[Mike]

I recently I replaced my old Cyber Power UPS (CP1500AVRLCDa) with the 
latest iteration (CP1500AVRLCD3) because the batteries in the old one 
went to a quiet place.

So far, everything seems to be working as intended.

The new one is a Cyber Power CP1500AVRLCD3


Here's the output I see ...

# upsc ups2
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 4750
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 27.3
battery.voltage.nominal: 24
device.mfr: CPS
device.model: CP1500AVRLCD3
device.serial: [redacted]
device.type: ups
driver.debug: 0
driver.flag.allow_killpower: 0
driver.flag.onlinedischarge: enabled
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: auto
driver.state: quiet
driver.version: 2.8.1
driver.version.data: CyberPower HID 0.8
driver.version.internal: 0.52
driver.version.usb: libusb-1.0.27 (API: 0x100010a)
input.voltage: 121.0
input.voltage.nominal: 120
output.voltage: 121.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 12
ups.mfr: CPS
ups.model: CP1500AVRLCD3
ups.productid: 0601
ups.realpower.nominal: 900
ups.serial: [redacted]
ups.status: OL
ups.test.result: No test initiated
ups.timer.shutdown: -60
ups.timer.start: -60
ups.vendorid: 0764