[Nut-upsuser] Salicru SPS One eventually loses connection

[S Shaikh]

Further to this, I have found the relevant debug message at the time of 
error. Paste here: https://pastebin.com/BzCvXbWj

The first unexpected log is this:

106432.128011   [D3] read: Overflow (-8)

The below commands can be run while the driver is running, so a 
workaround for this case may be to run them preemptively.

I expect this to not be the fault of Nut, however given that the host 
did not change between UPS replacement, this may be a new behaviour of 
Salicru units that might need to be handled?

Thank you for the insight,

On 19/04/2025 09:35, S Shaikh via Nut-upsuser wrote:
> I have run DMESG during the disconnect and there were no messages 
> during the time of disconnection. I ran: dmesg -w -T to follow the 
> output.
>
> However resetting the USB device worked, so at least now I can now 
> save a reboot:
>
> $ echo 0 | sudo tee /sys/bus/usb/devices/1-4/authorized
> 0
> $ echo 1 | sudo tee /sys/bus/usb/devices/1-4/authorized
> 1
>
> I am yet to try a new port/cable (the host is offsite).
>
> On 11/04/2025 22:04, Greg Troxel via Nut-upsuser wrote:
>> You really need to look at kernel-level messages.
>>
>> _______________________________________________
>> Nut-upsuser mailing list
>> Nut-upsuser at alioth-lists.debian.net
>> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser