[Nut-upsuser] POWERCOM UPS USB : UPS Shutdown
Alexey Korobeinikov
alexey at fseafood.com
Thu May 15 14:44:39 BST 2025
I downlod this:
https://github.com/networkupstools/nut
Code->Download ZIP.
15.05.2025 16:17, Jim Klimov:
> Seems you did not build the PR source branch, usbhid-ups version there
> should be 0.64.
>
> Jim
>
> On Thu, May 15, 2025, 13:04 Alexey Korobeinikov <alexey at fseafood.com>
> wrote:
>
> After reseting usb (usbreset 0d9f:0004), I can connect to UPS. But
> still have problem to shuting down the UPS:
>
> /usr/local/ups/bin/usbhid-ups -DDDD -a UPS -k
> Network UPS Tools 2.8.3.1 (development iteration after 2.8.3) -
> Generic HID driver 0.63
> USB communication driver (libusb 1.0) 0.50
> 0.000000 [D1] upsdrv_makevartable...
> 0.000078 [D1] Using USB implementation: libusb-1.0.26 (API:
> 0x01000109)
> 0.000238 [D3] main_arg: var='driver' val='usbhid-ups'
> 0.000253 [D3] main_arg: var='vendorid' val='0d9f'
> 0.000272 [D3] main_arg: var='productid' val='0004'
> 0.000289 [D3] main_arg: var='port' val='auto'
> 0.000310 [D3] main_arg: var='pollinterval' val='2'
> ...
> 0.004914 [D2] Checking device 4 of 10 (0D9F/0004)
> 0.019235 [D2] - VendorID: 0d9f
> 0.019276 [D2] - ProductID: 0004
> 0.019282 [D2] - Manufacturer: POWERCOM Co.,LTD
> 0.019288 [D2] - Product: HID UPS Battery
> 0.019293 [D2] - Serial Number: 004-0D9F-000
> 0.019298 [D2] - Bus: 006
> 0.019303 [D2] - Bus Port: 002
> 0.019308 [D2] - Device: 003
> 0.019313 [D2] - Device release number: 0002
> 0.019318 [D2] Trying to match device
> 0.019327 [D2] match_function_subdriver (non-SHUT mode):
> matching a device...
> 0.019347 [D3] match_function_regex: matching a device...
> 0.019420 [D2] Device matches
> 0.019438 [D2] Reading configuration descriptor 1 of 1
> 0.019479 [D3] libusb_kernel_driver_active() returned 0: Success
> 0.019516 [D2] Claimed interface 0 successfully
> 0.019533 [D3] nut_libusb_set_altinterface: skipped
> libusb_set_interface_alt_setting(udev, 0, 0)
> 0.021265 [D2] Retrieved HID descriptor (expected 9, got 9)
> 0.021306 [D3] HID descriptor, method 1: (9 bytes) => 09 21
> 00 01 00 01 22 e4 03
> 0.021314 [D3] HID descriptor length (method 1) 996
> 0.021330 [D4] i=0, extra[i]=09, extra[i+1]=21
> 0.021344 [D3] HID descriptor, method 2: (9 bytes) => 09 21
> 00 01 00 01 22 e4 03
> 0.021369 [D3] HID descriptor length (method 2) 996
> 0.021381 [D2] HID descriptor length 996
> 0.062245 [D2] Report Descriptor size = 996
> 0.062294 [D3] Report Descriptor: (996 bytes) => 05 84 09 04
> a1 01 09 24 a1 02 85 01 09 fe
> 0.062308 [D3] 79 01 75 08 95 01 15 00 26 ff 00 b1 22 85 02
> 09 ff 79 02 b1 22 05 85 85 05
> 0.062322 [D3] 09 89 79 04 b1 22 85 07 09 8b b1 22 85 08 09
> 2c 25 03 b1 22 85 09 09 83 25
> 0.062335 [D3] 64 b1 22 09 67 b1 22 85 0e 09 66 81 22 09 66
> b1 a2 85 0b 09 8c b1 22 85 0c
> 0.062347 [D3] 09 29 b1 a2 85 0d 09 85 75 10 27 ff ff 00 00
> b1 a2 85 37 09 68 81 22 09 68
> 0.062363 [D3] b1 a2 05 84 85 0f 09 57 75 10 16 00 00 27 ff
> ff 00 00 b1 a2 85 10 09 56 75
> 0.062380 [D3] 20 16 00 00 27 9f 86 01 00 b1 a2 85 11 09 40
> 75 10 16 64 00 26 f0 00 b1 22
> 0.062395 [D3] 85 12 09 30 75 10 16 00 00 26 40 01 b1 a2 85
> 2c 09 36 75 08 25 5a b1 a2 85
> 0.062410 [D3] 13 09 5a 75 08 15 00 25 03 b1 a2 09 02 a1 02
> 05 85 85 0a 09 44 75 01 15 00
> 0.062437 [D3] 25 01 81 a2 09 44 b1 a2 09 45 81 a2 09 45 b1
> a2 09 d0 81 a2 09 d0 b1 a2 09
> 0.062455 [D3] d1 81 a2 09 d1 b1 a2 09 42 81 a2 09 42 b1 a2
> 09 43 81 a2 09 43 b1 a2 09 4b
> 0.062474 [D3] 81 a2 09 4b b1 a2 09 db 81 a2 09 db b1 a2 05
> 84 09 68 81 a2 09 68 b1 a2 09
> 0.062491 [D3] 69 81 a2 09 69 b1 a2 09 73 81 a2 09 73 b1 a2
> 09 65 81 a2 09 65 b1 a2 95 03
> 0.062510 [D3] 81 01 b1 01 95 01 06 86 ff 09 80 81 a2 09 80
> b1 a2 c0 c0 05 84 09 12 a1 00
> 0.062526 [D3] 85 15 09 58 75 08 25 66 b1 a2 85 16 09 70 75
> 08 25 03 b1 a2 05 85 85 17 09
> 0.062544 [D3] 85 75 10 27 ff ff 00 00 b1 a2 85 18 09 66 75
> 08 15 00 25 64 b1 a2 05 84 85
> 0.062559 [D3] 19 09 40 75 10 16 00 0c 26 00 30 b1 22 85 1a
> 09 30 75 10 16 00 09 26 00 24
> 0.062577 [D3] b1 a2 85 1b 09 56 75 20 16 00 00 27 9f 86 01
> 00 b1 a2 85 2d 09 36 75 08 25
> 0.062594 [D3] 5a b1 a2 c0 05 84 09 1a a1 00 85 1c 09 40 75
> 10 16 64 00 26 f0 00 b1 22 85
> 0.062612 [D3] 1d 09 30 75 10 16 00 00 26 40 01 b1 a2 85 2e
> 09 30 75 10 16 00 00 26 40 01
> 0.062627 [D3] b1 a2 85 1e 09 32 75 08 15 00 25 46 b1 a2 c0
> 05 84 09 1c a1 00 85 2f 09 41
> 0.062645 [D3] 75 08 15 01 25 0c b1 22 85 1f 09 35 75 08 15
> 00 25 64 b1 a2 85 20 09 40 75
> 0.062664 [D3] 10 16 64 00 26 f0 00 b1 22 85 21 09 30 75 10
> 16 00 00 26 40 01 b1 a2 85 30
> 0.062681 [D3] 09 42 75 08 15 32 25 3c b1 22 85 22 09 32 75
> 08 15 00 25 46 b1 a2 85 23 09
> 0.062699 [D3] 57 75 08 15 00 25 12 b1 a2 85 24 09 56 75 20
> 16 00 00 27 9f 86 01 00 b1 a2
> 0.062716 [D3] c0 05 84 85 06 09 01 79 05 b1 a2 85 25 09 5a
> 75 08 15 00 25 03 b1 a2 09 02
> 0.062736 [D3] a1 02 05 85 85 26 09 44 75 01 15 00 25 01 b1
> a2 09 45 b1 a2 09 d0 b1 a2 09
> 0.062752 [D3] d1 b1 a2 09 42 b1 a2 09 43 b1 a2 09 4b b1 a2
> 09 db b1 a2 05 84 09 68 b1 a2
> 0.062768 [D3] 09 69 b1 a2 09 73 b1 a2 09 65 b1 a2 09 6e b1
> a2 09 6f b1 a2 09 71 b1 a2 06
> 0.062791 [D3] 86 ff 09 80 b1 a2 c0 85 27 05 84 09 69 75 08
> 15 00 25 01 b1 a2 09 1e a1 00
> 0.062807 [D3] 85 a0 09 01 75 08 95 07 15 00 26 ff 00 b1 03
> 85 a1 09 01 75 08 95 07 15 00
> 0.062835 [D3] 26 ff 00 b1 03 85 a2 09 01 75 08 95 07 15 00
> 26 ff 00 b1 03 85 a3 09 01 75
> 0.062853 [D3] 08 95 07 15 00 26 ff 00 b1 03 85 a4 09 01 75
> 08 95 07 15 00 26 ff 00 b1 03
> 0.062871 [D3] 85 a5 09 01 75 08 95 07 15 00 26 ff 00 b1 03
> 85 a6 09 01 75 08 95 07 15 00
> 0.062889 [D3] 26 ff 00 b1 03 85 a7 09 01 75 08 95 07 15 00
> 26 ff 00 b1 03 85 a8 09 01 75
> 0.062905 [D3] 08 95 07 15 00 26 ff 00 b1 03 85 a9 09 01 75
> 08 95 07 15 00 26 ff 00 b1 03
> 0.062923 [D3] 85 aa 09 01 75 08 95 07 15 00 26 ff 00 b1 03
> 85 ab 09 01 75 08 95 07 15 00
> 0.062940 [D3] 26 ff 00 b1 03 85 ac 09 01 75 08 95 07 15 00
> 26 ff 00 b1 03 85 ad 09 01 75
> 0.062960 [D3] 08 95 07 15 00 26 ff 00 b1 03 85 ae 09 01 75
> 08 95 07 15 00 26 ff 00 b1 03
> 0.062977 [D3] 85 31 09 01 75 08 95 01 15 00 26 ff 00 b1 03
> 85 32 09 01 75 08 95 01 15 00
> 0.062990 [D3] 26 ff 00 b1 03 c0 c0
> 0.063197 Using subdriver: PowerCOM HID 0.71
> 0.063214 [D1] 102 HID objects found
> 0.063229 [D4] Entering libusb_get_report
> 0.064157 [D3] Report[get]: (2 bytes) => 01 01
> 0.064197 [D1] Path: UPS.PowerSummary.iProduct, Type:
> Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 1
> 0.064209 [D4] Entering libusb_get_report
> 0.066271 [D3] Report[get]: (2 bytes) => 02 02
> 0.066311 [D1] Path: UPS.PowerSummary.iSerialNumber, Type:
> Feature, ReportID: 0x02, Offset: 0, Size: 8, Value: 2
> 0.066320 [D4] Entering libusb_get_report
> ...
> 0.186774 [D4] Entering libusb_get_report
> 0.188120 nut_libusb_get_report: Success
> 0.188164 [D1] Can't retrieve Report 2d: Success
> 0.188182 [D4] string_to_path: depth = 3
> 0.188197 [D4] HIDGetItemData: FindObject_with_Path() failed
> to locate 'PowercomUPS.PowercomBatterySystem.PowercomVoltage'
> 0.188210 [D4] string_to_path: depth = 4
> ...
> 0.188755 Initiating UPS [UPS] shutdown
> 0.188770 [D1] loop_shutdown_commands: call
> do_loop_shutdown_commands() with driver-default sdcommands
> 0.188780 [D1] Starting
> do_loop_shutdown_commands(shutdown.default), call depth 1...
> 0.188791 [D1] upsdrv_shutdown...
> 0.188802 [D1] Starting
> do_loop_shutdown_commands(shutdown.return,shutdown.reboot,load.off.delay,shutdown.stayoff),
> call depth 2...
> 0.188813 [D1] instcmd(shutdown.return, [NULL])
> 0.188822 [D3] instcmd: using Path
> 'UPS.PowerSummary.DelayBeforeShutdown'
> 0.188833 [D2] instcmd: shutdown.return requires an explicit
> parameter
>
> 0.188842 [D1] instcmd(shutdown.reboot, [NULL])
> 0.188856 [D2] find_nut_info: unknown info type: shutdown.reboot
> 0.188866 [D3] instcmd: cmdname 'shutdown.reboot' not found;
> checking for alternatives
> 0.188879 [D2] instcmd: info element unavailable shutdown.reboot
>
> 0.188890 [D1] instcmd(load.off.delay, [NULL])
> 0.188902 [D2] find_nut_info: unknown info type: load.off.delay
> 0.188911 [D3] instcmd: cmdname 'load.off.delay' not found;
> checking for alternatives
> 0.188921 [D2] instcmd: info element unavailable load.off.delay
>
> 0.188935 [D1] instcmd(shutdown.stayoff, [NULL])
> 0.188945 [D3] instcmd: using Path
> 'UPS.PowerSummary.DelayBeforeShutdown'
> 0.188956 [D2] instcmd: shutdown.stayoff requires an explicit
> parameter
>
> 0.188966 [D1] Ending
> do_loop_shutdown_commands(shutdown.return,shutdown.reboot,load.off.delay,shutdown.stayoff),
> call depth 2: return-code 2
> 0.188974 Shutdown failed!
> 0.188986 [D1] set_exit_flag: raising exit flag due to signal -1
> 0.188996 [D1] do_loop_shutdown_commands(): command
> 'shutdown.default' was handled successfully
> 0.189005 [D1] Ending
> do_loop_shutdown_commands(shutdown.default), call depth 1:
> return-code 0
> 0.189014 UPS [UPS]: shutdown request was successful with
> 'shutdown.default'
> 0.189022 [D1] set_exit_flag: raising exit flag due to
> programmatic abort: EXIT_FAILURE
> 0.189040 [D1] upsdrv_cleanup...
> 0.189311 [D1] upsnotify: failed to notify about state
> NOTIFY_STATE_STOPPING: no notification tech defined, will not spam
> more about it
> 0.189331 [D1] On systems without service units, consider
> `export NUT_QUIET_INIT_UPSNOTIFY=true`
>
> The UPS didn't shut down, just still BEEP because on battery ( >3
> min wait )...
>
> 13.05.2025 18:31, Jim Klimov:
>> Check https://github.com/networkupstools/nut/pull/2955 please.
>>
>> Jim
>>
>> On Mon, May 12, 2025 at 12:04 PM Jim Klimov
>> <jimklimov+nut at gmail.com <mailto:jimklimov%2Bnut at gmail.com>> wrote:
>>
>> Hoped to look into this just today, if nobody beat me to it yet.
>>
>> Jim
>>
>> On Mon, May 12, 2025 at 11:54 AM Alexey Korobeinikov
>> <alexey at fseafood.com> wrote:
>>
>> Are there any chances that this error can be fixed?
>>
>> 06.05.2025 18:19, Alexey Korobeinikov:
>>> Hi! Thank You!
>>>
>>> The UPS behavior are chages with NUT v.2.8.2 but more
>>> strange
>>>
>>> After this command (if power cord unpluged)
>>> /usr/local/ups/bin/usbhid-ups -DDDD -a UPS -k
>>>
>>> ....
>>> 0.188173 [D4] string_to_path: depth = 3
>>> 0.188187 [D4] string_to_path: depth = 3
>>> 0.188199 [D4] string_to_path: depth = 3
>>> 0.188211 [D4] string_to_path: depth = 3
>>> 0.188246 [D2] find_nut_info: unknown info type:
>>> load.off.delay
>>> 0.188267 [D2] find_nut_info: unknown info type:
>>> load.off.delay
>>> 0.188280 Initiating UPS shutdown
>>> 0.188290 [D1] upsdrv_shutdown...
>>> 0.188298 [D1] instcmd(shutdown.return, [NULL])
>>> 0.188316 [D3] instcmd: using Path
>>> 'UPS.PowerSummary.DelayBeforeShutdown'
>>> 0.188332 [D3] powercom_shutdown_nuf: value =
>>> (null), command = 5E00
>>> 0.224970 [D3] Report[set]: (3 bytes) => 0f 00 5e
>>> 0.225003 [D4] Set report succeeded
>>> 0.225012 [D3] instcmd: SUCCEED
>>>
>>> The UPS are start double beeping every 2 seconds, but
>>> didn't turn off himself ( 2 minutes wait )
>>> UPS are still beeping if power are restored
>>>
>>> Status are:
>>> # upsc ups at localhost
>>> battery.charge: 100
>>> battery.charge.low: 70
>>> battery.charge.warning: 30
>>> battery.mfr.date: 2014/01/15
>>> battery.runtime: 800
>>> battery.type: PbAc
>>> device.mfr: POWERCOM Co.,LTD
>>> device.model: HID UPS Battery
>>> device.serial: 004-0D9F-000
>>> device.type: ups
>>> driver.debug: 0
>>> driver.flag.allow_killpower: 0
>>> driver.flag.ignorelb: enabled
>>> driver.name <http://driver.name>: usbhid-ups
>>> driver.parameter.offdelay: 30
>>> driver.parameter.ondelay: 60
>>> driver.parameter.override.battery.charge.low: 70
>>> driver.parameter.pollfreq: 30
>>> driver.parameter.pollinterval: 2
>>> driver.parameter.port: auto
>>> driver.parameter.productid: 0004
>>> driver.parameter.synchronous: auto
>>> driver.parameter.vendorid: 0d9f
>>> driver.state: quiet
>>> driver.version: 2.8.2
>>> driver.version.data: PowerCOM HID 0.7
>>> driver.version.internal: 0.53
>>> driver.version.usb: libusb-1.0.26 (API: 0x1000109)
>>> input.frequency: 50.0
>>> input.voltage: 224.0
>>> input.voltage.nominal: 220
>>> output.frequency: 50.0
>>> output.voltage: 224.0
>>> output.voltage.nominal: 220
>>> ups.beeper.status: enabled
>>> ups.date: 2014/01/15
>>> ups.delay.shutdown: 30
>>> ups.delay.start: 60
>>> ups.load: 1
>>> ups.mfr: POWERCOM Co.,LTD
>>> ups.model: HID UPS Battery
>>> ups.productid: 0004
>>> ups.serial: 004-0D9F-000
>>> ups.status: OL
>>> ups.test.result: Done and passed
>>> ups.timer.shutdown: 269
>>> ups.timer.start: 0
>>> ups.vendorid: 0d9f
>>> root at vTEMPLATE8:/var/log# upsc ups at localhost
>>> battery.charge: 100
>>> battery.charge.low: 70
>>> battery.charge.warning: 30
>>> battery.mfr.date: 2014/01/15
>>> battery.runtime: 800
>>> battery.type: PbAc
>>> device.mfr: POWERCOM Co.,LTD
>>> device.model: HID UPS Battery
>>> device.serial: 004-0D9F-000
>>> device.type: ups
>>> driver.debug: 0
>>> driver.flag.allow_killpower: 0
>>> driver.flag.ignorelb: enabled
>>> driver.name <http://driver.name>: usbhid-ups
>>> driver.parameter.offdelay: 30
>>> driver.parameter.ondelay: 60
>>> driver.parameter.override.battery.charge.low: 70
>>> driver.parameter.pollfreq: 30
>>> driver.parameter.pollinterval: 2
>>> driver.parameter.port: auto
>>> driver.parameter.productid: 0004
>>> driver.parameter.synchronous: auto
>>> driver.parameter.vendorid: 0d9f
>>> driver.state: quiet
>>> driver.version: 2.8.2
>>> driver.version.data: PowerCOM HID 0.7
>>> driver.version.internal: 0.53
>>> driver.version.usb: libusb-1.0.26 (API: 0x1000109)
>>> input.frequency: 50.0
>>> input.voltage: 224.0
>>> input.voltage.nominal: 220
>>> output.frequency: 50.0
>>> output.voltage: 224.0
>>> output.voltage.nominal: 220
>>> ups.beeper.status: enabled
>>> ups.date: 2014/01/15
>>> ups.delay.shutdown: 30
>>> ups.delay.start: 60
>>> ups.load: 1
>>> ups.mfr: POWERCOM Co.,LTD
>>> ups.model: HID UPS Battery
>>> ups.productid: 0004
>>> ups.serial: 004-0D9F-000
>>> ups.status: OL
>>> ups.test.result: Done and passed
>>> ups.timer.shutdown: 89
>>> ups.timer.start: 0
>>> ups.vendorid: 0d9f
>>> root at vTEMPLATE8:/var/log# upsc ups at localhost
>>> battery.charge: 100
>>> battery.charge.low: 70
>>> battery.charge.warning: 30
>>> battery.mfr.date: 2014/01/15
>>> battery.runtime: 800
>>> battery.type: PbAc
>>> device.mfr: POWERCOM Co.,LTD
>>> device.model: HID UPS Battery
>>> device.serial: 004-0D9F-000
>>> device.type: ups
>>> driver.debug: 0
>>> driver.flag.allow_killpower: 0
>>> driver.flag.ignorelb: enabled
>>> driver.name <http://driver.name>: usbhid-ups
>>> driver.parameter.offdelay: 30
>>> driver.parameter.ondelay: 60
>>> driver.parameter.override.battery.charge.low: 70
>>> driver.parameter.pollfreq: 30
>>> driver.parameter.pollinterval: 2
>>> driver.parameter.port: auto
>>> driver.parameter.productid: 0004
>>> driver.parameter.synchronous: auto
>>> driver.parameter.vendorid: 0d9f
>>> driver.state: quiet
>>> driver.version: 2.8.2
>>> driver.version.data: PowerCOM HID 0.7
>>> driver.version.internal: 0.53
>>> driver.version.usb: libusb-1.0.26 (API: 0x1000109)
>>> input.frequency: 50.0
>>> input.voltage: 226.0
>>> input.voltage.nominal: 220
>>> output.frequency: 50.0
>>> output.voltage: 226.0
>>> output.voltage.nominal: 220
>>> ups.beeper.status: enabled
>>> ups.date: 2014/01/15
>>> ups.delay.shutdown: 30
>>> ups.delay.start: 60
>>> ups.load: 1
>>> ups.mfr: POWERCOM Co.,LTD
>>> ups.model: HID UPS Battery
>>> ups.productid: 0004
>>> ups.serial: 004-0D9F-000
>>> ups.status: OL
>>> ups.test.result: Done and passed
>>> ups.timer.shutdown: 3148
>>> ups.timer.start: 0
>>> ups.vendorid: 0d9f
>>>
>>> And strange with timer parametr that are changes cycling:
>>> ups.timer.shutdown: 3570
>>> ups.timer.shutdown: 2430
>>> ups.timer.shutdown: 1710
>>> ...
>>> ups.timer.shutdown: 870
>>> ups.timer.shutdown: 3629
>>> ups.timer.shutdown: 2729
>>> ups.timer.shutdown: 1829
>>> ...
>>> ups.timer.shutdown: 89
>>> ups.timer.shutdown: 3148
>>> ...
>>>
>>> the ups.conf are:
>>> [UPS]
>>> driver = usbhid-ups
>>> vendorid = 0d9f
>>> productid = 0004
>>> # powercom_sdcmd_byte_order_fallback
>>> port = auto
>>> # pollonly = enabled
>>> pollinterval = 2
>>> pollfreq = 30
>>> offdelay = 30
>>> ondelay = 60
>>> allow_killpower
>>> ignorelb
>>> override.battery.charge.low = 70
>>> # override.battery.runtime.low = 600
>>>
>>> 06.05.2025 01:49, Jim Klimov:
>>>> At least the "shutdown.return requires a parameter"
>>>> part *may* be a regression of the new "sdcommands"
>>>> change in v2.8.3,though I don't think older code passed
>>>> any. Maybe something got lost in mass-edit changes though.
>>>>
>>>> Can you please double-check with 2.8.2 if its older
>>>> approach to UPS shutdown behaved better?
>>>>
>>>> Jim Klimov
>>>>
>>>> On Tue, May 6, 2025, 00:41 Alexey Korobeinikov
>>>> <alexey at fseafood.com> wrote:
>>>>
>>>> Hi, my UPS Model Powercom BNT400AP ( made 2017.12 )
>>>> on Linux Devuan
>>>> Daedalus and NUT v2.8.3 (install from source
>>>> tarball with "configure
>>>> --with-usb --with-user=nut --with-group=nut
>>>> --with-libusb=1.0
>>>> --with-statepath=/run/nut --with-pidpath=/run/nut"
>>>> options) didn't
>>>> shutdown itself after OS is shuting down by signal
>>>> of UPS battary is low.
>>>>
>>>> ...
>>>>
>>>> 0.184242 Initiating UPS [UPS] shutdown
>>>> 0.184257 [D1] loop_shutdown_commands: call
>>>> do_loop_shutdown_commands() with driver-default
>>>> sdcommands
>>>> 0.184267 [D1] Starting
>>>> do_loop_shutdown_commands(shudown.default), call
>>>> depth 1...
>>>> 0.184280 [D1] upsdrv_shutdown...
>>>> 0.184289 [D1] Starting
>>>> do_loop_shutdown_commands(shutdown.return,shutdown.reboot,load.off.delay,shutdown.stayoff),
>>>>
>>>> call depth 2...
>>>> 0.184299 [D1] instcmd(shutdown.return, [NULL])
>>>> 0.184313 [D3] instcmd: using Path
>>>> 'UPS.PowerSummary.DelayBeforehutdown'
>>>> 0.184321 [D2] instcmd: shutdown.return
>>>> requires an explicit
>>>> parameter
>>>>
>>>> 0.184331 [D1] instcmd(shutdown.reboot, [NULL])
>>>> 0.184348 [D2] find_nut_info: unknown info
>>>> type: shutdown.reboot
>>>> 0.184358 [D3] instcmd: cmdname
>>>> 'shutdown.reboot' not found;
>>>> checking for alternatives
>>>> 0.184371 [D2] instcmd: info element
>>>> unavailable shutdown.reboot
>>>>
>>>> 0.184387 [D1] instcmd(load.off.delay, [NULL])
>>>> 0.184398 [D2] find_nut_info: unknown info
>>>> type: load.off.delay
>>>> 0.184407 [D3] instcmd: cmdname
>>>> 'load.off.delay' not found;
>>>> checking for alternatives
>>>> 0.184418 [D2] instcmd: info element
>>>> unavailable load.off.delay
>>>>
>>>> 0.184428 [D1] instcmd(shutdown.stayoff, [NULL])
>>>> 0.184438 [D3] instcmd: using Path
>>>> 'UPS.PowerSummary.DelayBeforehutdown'
>>>> 0.184449 [D2] instcmd: shutdown.stayoff
>>>> requires an explicit
>>>> parameter
>>>>
>>>> 0.184462 [D1] Ending
>>>> do_loop_shutdown_commands(shutdown.return,shutdown.reboot,load.off.delay,shutdown.stayoff),
>>>>
>>>> call
>>>> depth 2: return-code 2
>>>> 0.184471 Shutdown failed!
>>>> 0.184483 [D1] set_exit_flag: raising exit
>>>> flag due to signal -1
>>>> 0.184493 [D1] do_loop_shutdown_commands():
>>>> command
>>>> 'shutdown.default' was handled successfully
>>>> 0.184502 [D1] Ending
>>>> do_loop_shutdown_commands(shutdown.default),
>>>> call depth 1: return-code 0
>>>> 0.184512 UPS [UPS]: shutdown request was
>>>> successful with
>>>> 'shutdown.default'
>>>> 0.184523 [D1] set_exit_flag: raising exit
>>>> flag due to
>>>> programmatic abort: EXIT_FAILURE
>>>> 0.184540 [D1] upsdrv_cleanup...
>>>> 0.184899 [D1] upsnotify: failed to notify
>>>> about state
>>>> NOTIFY_STATE_STOPPING: no notification tech
>>>> defined, will not spam more about it
>>>> 0.184936 [D1] On systems without service
>>>> units, consider `export
>>>> NUT_QUIET_INIT_UPSNOTIFY=true`
>>>>
>>>> I try to use "powercom_sdcmd_byte_order_fallback"
>>>> option, with same effect.
>>>>
>>>> Wat's wrong with my UPS/NUT ?
>>>> Thank You!
>>>>
>>>> --
>>>> Oleksii Korobeinikov
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Nut-upsuser mailing list
>>>> Nut-upsuser at alioth-lists.debian.net
>>>> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>>>>
>>>
>>> --
>>> З Повагою
>>> Коробейніков Олексій
>>> Системний адміністратор
>>>
>>> ТОВ "Флагман Сіфуд"
>>> вул. Броварська 152 <https://www.google.com/maps/search/%D0%B2%D1%83%D0%BB.+%D0%91%D1%80%D0%BE%D0%B2%D0%B0%D1%80%D1%81%D1%8C%D0%BA%D0%B0+152?entry=gmail&source=g>, смт Велика Димерка
>>> Київська область, 07442
>>> р.+38 044 495-88-00
>>> вн.6101
>>> м.+38 067 994-40-48
>>>
>>> _______________________________________________
>>> Nut-upsuser mailing list
>>> Nut-upsuser at alioth-lists.debian.net
>>> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>>
>> --
>> З Повагою
>> Коробейніков Олексій
>> Системний адміністратор
>>
>> ТОВ "Флагман Сіфуд"
>> вул. Броварська 152 <https://www.google.com/maps/search/%D0%B2%D1%83%D0%BB.+%D0%91%D1%80%D0%BE%D0%B2%D0%B0%D1%80%D1%81%D1%8C%D0%BA%D0%B0+152?entry=gmail&source=g>, смт Велика Димерка
>> Київська область, 07442
>> р.+38 044 495-88-00
>> вн.6101
>> м.+38 067 994-40-48
>>
>
> --
> З Повагою
> Коробейніков Олексій
> Системний адміністратор
>
> ТОВ "Флагман Сіфуд"
> вул. Броварська 152 <https://www.google.com/maps/search/%D0%B2%D1%83%D0%BB.+%D0%91%D1%80%D0%BE%D0%B2%D0%B0%D1%80%D1%81%D1%8C%D0%BA%D0%B0+152?entry=gmail&source=g>, смт Велика Димерка
> Київська область, 07442
> р.+38 044 495-88-00
> вн.6101
> м.+38 067 994-40-48
>
--
З Повагою
Коробейніков Олексій
Системний адміністратор
ТОВ "Флагман Сіфуд"
вул. Броварська 152, смт Велика Димерка
Київська область, 07442
р.+38 044 495-88-00
вн.6101
м.+38 067 994-40-48
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20250515/89e824b6/attachment-0001.htm>
More information about the Nut-upsuser
mailing list