<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
<br>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
Dear Arjen,<br>
<br>
Arjen de Korte wrote:
<blockquote cite="mid:47BE9F6C.8030008@de-korte.org" type="cite">
<pre wrap=""><!---->
We would like you to run the usbhid-ups driver in debug mode and post
the results here.
<path>/usbhid-ups -DD -a MGEPULSAR
The first 30 seconds of output are what we are interested in. After
that, terminate the driver (it will stay in the foreground until you
kill it).
</pre>
</blockquote>
See attachment.<br>
<blockquote cite="mid:47BE9F6C.8030008@de-korte.org" type="cite">
<pre wrap="">These used to be variables, which is wrong. Writing to
'ups.delay.(start|reboot|shutdown)' will start a timer in the UPS and as
such, these are commands. Delayed start and stop on shutdown is
controlled via the variables 'ondelay' and 'offdelay'. If you want
switch on/off the load (possibly with a delay), you're advised to use
the 'load.on' and 'load.off' commands. These take an optional parameter
specifying the delay. See 'man 8 upscmd'.
</pre>
</blockquote>
I will check manual of course.<br>
This "command variable" are missing anyway (I remember lot of options
but now there are just few) - probably related to bad status. Will
check when first issue solved.<br>
Also there are just 3 commands available:<br>
* Start quick battery test<br>
* Start deep battery test<br>
* Stop battery test<br>
<br>
<br>
Parameters available.<br>
<table align="center" cellpadding="5" cellspacing="0" width="100%">
<tbody>
<tr>
<th colspan="2" bgcolor="#60b0b0"><font size="+2">Network UPS
Tools upsset 2.2.1-</font> </th>
</tr>
<tr>
<th colspan="2" bgcolor="#60b0b0">MGEPULSAR</th>
</tr>
<tr bgcolor="#60b0b0">
<th>Setting</th>
<th>Value</th>
</tr>
<tr align="center" bgcolor="#60b0b0">
<td>Prevent deep discharge of battery</td>
<td> <input name="UPSVAR_battery.protection" value="yes" size="5"
type="text"></td>
</tr>
<tr align="center" bgcolor="#60b0b0">
<td>Outlet description</td>
<td> <input name="UPSVAR_outlet.0.desc" value="Main Outlet"
size="20" type="text"></td>
</tr>
<tr align="center" bgcolor="#60b0b0">
<td>Outlet description</td>
<td> <input name="UPSVAR_outlet.1.desc"
value="PowerShare Outlet 1" size="20" type="text"></td>
</tr>
<tr align="center" bgcolor="#60b0b0">
<td>Outlet description</td>
<td> <input name="UPSVAR_outlet.2.desc"
value="PowerShare Outlet 2" size="20" type="text"></td>
</tr>
<tr align="center" bgcolor="#60b0b0">
<td>Nominal output voltage (V)</td>
<td> <input name="UPSVAR_output.voltage.nominal" value="230"
size="5" type="text"></td>
</tr>
<tr align="center" bgcolor="#60b0b0">
<td>Load when UPS switches to overload condition (percent)</td>
<td> <input name="UPSVAR_ups.load.high" value="100" size="5"
type="text"></td>
</tr>
<tr align="center" bgcolor="#60b0b0">
<td>Interval between self tests (seconds)</td>
<td> <input name="UPSVAR_ups.test.interval" value="2678400"
size="8" type="text"></td>
</tr>
</tbody>
</table>
This option-command was there before so I expect it also after update
as I don't seen any note about it. Anyway commands I see<br>
<blockquote cite="mid:47BE9F6C.8030008@de-korte.org" type="cite">
<pre wrap="">Not being able to write to 'outlet.x.desc' is a bug in the mge-hid
subdriver. The value written to this variable is not refreshed after
writing it. If this is the case, you would see the change after
restarting of this driver. Thanks for reporting this!
</pre>
</blockquote>
After restart whole computer still no change - hopefully all issues are
related.<br>
Anyway bad on this issue is that any restart of router - where UPS is
connect - will cause switch off of all servers because of wrong state
report.<br>
<br>
Thanks for now. Looking forward for your answer.<br>
<blockquote cite="mid:47BE9F6C.8030008@de-korte.org" type="cite">
<pre wrap="">Best regards, Arjen
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="72">--
Oto BREZINA
SW R&D Manager
Printflow, Slovakia EU</pre>
<br>
<pre class="moz-signature" cols="72">--
Oto BREZINA
SW R&D Manager
Printflow, Slovakia EU</pre>
<br>
<pre class="moz-signature" cols="72">--
Oto BREZINA
SW R&D Manager
Printflow, Slovakia EU</pre>
</body>
</html>