<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=text/html;charset=iso-8859-1 http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.7000.16"></HEAD>
<BODY style="PADDING-LEFT: 10px; PADDING-RIGHT: 10px; PADDING-TOP: 15px"
id=MailContainerBody leftMargin=0 topMargin=0 CanvasTabStop="true"
name="Compose message area">
<DIV> </DIV>
<DIV><FONT face=Calibri>Hi everyone,</FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV>
<DIV><FONT face=Calibri>Been searching like crazy to find an answer to this. I
have even read some of the source code but cannot figure this one
out.</FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV>
<DIV><FONT face=Calibri>I have installed nut 2.4.1 on my QNAP 409 Pro. (command:
ipkg install nut)</FONT></DIV>
<DIV><FONT face=Calibri>I have configured the ups.conf, upsd.conf and
upsd.users.</FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV>
<DIV><FONT face=Calibri>When i run "upsdrvctl start" I get the following error
messages and output.</FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV><FONT face=Calibri>
<DIV>====================================================================<BR>Network
UPS Tools - UPS driver controller 2.4.1<BR>Network UPS Tools - BCMXCP UPS driver
0.21 (2.4.1)<BR>USB communication subdriver 0.17<BR>Communications with UPS
lost: Receive error (data): got 33 bytes instead of 116!!!</DIV>
<DIV> </DIV>
<DIV>Communications with UPS lost: Receive error (Request command): COMMAND:
31</DIV>
<DIV> </DIV>
<DIV>RECONNECT USB DEVICE</DIV>
<DIV> </DIV>
<DIV>Can't set POWERWARE USB configuration<BR>Unable to find POWERWARE UPS
device on USB bus</DIV>
<DIV> </DIV>
<DIV>Things to try:</DIV>
<DIV> </DIV>
<DIV> - Connect UPS device to USB bus</DIV>
<DIV> </DIV>
<DIV> - Run this driver as another user (upsdrvctl -u or 'user=...' in
ups.conf).<BR> See upsdrvctl(8) and ups.conf(5).</DIV>
<DIV> </DIV>
<DIV>Fatal error: unusable configuration<BR>CLOSING</DIV>
<DIV> </DIV>
<DIV>Driver failed to start (exit
status=1)<BR>====================================================================</DIV>
<DIV> </DIV>
<DIV>My ups.conf looks like this</DIV>
<DIV> </DIV>
<DIV><SPAN lang=EN-AU>
<P>user=admin</P>
<P>[PowerWare]</P>
<P>driver = bcmxcp_usb</P>
<P>port = auto</P>
<P>desc = "PowerWare 5115 UPS"</P>
<P>#pollinterval=1</P><FONT size=1 face="Courier New"><FONT size=3 face=Calibri>
<P>baud_rate = 9600</P></FONT></FONT></SPAN></DIV>
<DIV> </DIV>
<DIV>I have tried various configurations but nothing seems to work.</DIV>
<DIV> </DIV>
<DIV>Once I receive this error I need to disconnect and reconnect the USB cable
to get any further.</DIV>
<DIV>Is there anything I can try?</DIV>
<DIV>UPS work correctly on a Windows Vista/2008.</DIV>
<DIV> </DIV>
<DIV>Over the next few days I will try and install NUT on ubuntu 8.10 and try it
on that.</DIV>
<DIV> </DIV>
<DIV>Thanks for your help!</DIV>
<DIV>Greg</FONT></DIV></BODY></HTML>