<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=text/html;charset=utf-8 http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.7100.18"></HEAD>
<BODY style="PADDING-LEFT: 10px; PADDING-RIGHT: 10px; PADDING-TOP: 15px" 
id=MailContainerBody leftMargin=0 topMargin=0 CanvasTabStop="true" 
name="Compose message area">
<DIV><FONT face=Calibri>Hi Arnaud,</FONT></DIV>
<DIV style="FONT: 10pt Tahoma">
<DIV><BR></DIV>
<DIV style="BACKGROUND: #f5f5f5">
<DIV style="font-color: black"><B>From:</B> <A title=aquette.dev@gmail.com 
href="mailto:aquette.dev@gmail.com">Arnaud Quette</A> </DIV>
<DIV><B>Sent:</B> Tuesday, May 26, 2009 11:53 PM</DIV>
<DIV><B>To:</B> <A title=greg_roll@hotmail.com 
href="mailto:greg_roll@hotmail.com">Greg</A> </DIV>
<DIV><B>Cc:</B> <A title=kjell.claesson@epost.tidanet.se 
href="mailto:kjell.claesson@epost.tidanet.se">Kjell Claesson</A> ; <A 
title=nut-upsuser@lists.alioth.debian.org 
href="mailto:nut-upsuser@lists.alioth.debian.org">nut-upsuser@lists.alioth.debian.org</A> 
</DIV>
<DIV><B>Subject:</B> Re: [Nut-upsuser] Nut and PowerWare 5115</DIV></DIV></DIV>
<DIV><BR></DIV>Hi Greg,<BR><BR>
<DIV class=gmail_quote>2009/5/21 Greg <SPAN dir=ltr>&lt;<A 
href="mailto:greg_roll@hotmail.com">greg_roll@hotmail.com</A>&gt;</SPAN><BR>
<BLOCKQUOTE 
style="BORDER-LEFT: rgb(204,204,204) 1px solid; MARGIN: 0pt 0pt 0pt 0.8ex; PADDING-LEFT: 1ex" 
class=gmail_quote>
  <DIV style="PADDING-LEFT: 10px; PADDING-RIGHT: 10px; PADDING-TOP: 15px" 
  name="Compose message area">
  <DIV><FONT face=Calibri>Hi Arnaud,</FONT></DIV>
  <DIV><FONT face=Calibri></FONT>&nbsp;</DIV>
  <DIV><FONT face=Calibri>Any luck with the latest </FONT><FONT 
  face="Times New Roman">subversion trunk?</FONT></DIV></DIV></BLOCKQUOTE>
<DIV><BR>sorry for the lag... too many things, not enough time.<BR><BR>I'm 
preparing a version with some more debug info, but I'm still puzzled with your 
issue.<BR>in the meantime, can you retry the debug test on your 9.04, 
ie<BR><BR><SPAN lang=EN-AU>export USB_DEBUG=3 &amp;&amp; /lib/nut/bcmxcp_usb -u 
root -DDDDD -a PowerWare</SPAN><BR><BR>if you end up with "<FONT 
face=Calibri>Can't set POWERWARE USB configuration", then we should have an msg 
from libusb like "</FONT>could not set config..." with the exact 
errno...<BR><BR>I'll then ping you for the updated driver.</DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Calibri>Running the above on both 8.10 and 9.04 gives the 
following output. The command prompt is not returned.&nbsp;bcmxcp_usb keeps 
running</FONT></DIV><FONT face=Calibri></FONT></DIV>
<DIV class=gmail_quote><FONT 
face=Calibri>-------------------------------------------------</FONT></DIV>
<DIV class=gmail_quote><SPAN lang=EN-AU>
<P>root@Ubuntu9:~# export USB_DEBUG=3 &amp;&amp; /lib/nut/bcmxcp_usb -u root 
-DDDD -a PowerWare</P>
<P>Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)</P>
<P>USB communication subdriver 0.17</P>
<P>debug level is '4'</P>
<P>usb_set_debug: Setting debugging level to 3 (on)</P>
<P>usb_os_init: Found USB VFS at /dev/bus/usb</P>
<P>usb_os_find_busses: Found 001</P>
<P>usb_os_find_busses: Found 002</P>
<P>usb_os_find_devices: Found 001 on 001</P>
<P>usb_os_find_devices: Found 004 on 002</P>
<P>skipped 1 class/vendor specific interface descriptors</P>
<P>usb_os_find_devices: Found 002 on 002</P>
<P>usb_os_find_devices: Found 001 on 002</P>
<P>error obtaining child information: Inappropriate ioctl for device</P>
<P>Length of meter map: 81</P>
<P>Index Offset Format NUT</P>
<P>0021 0000 f0 None</P>
<P>0023 0004 f0 ups.power</P>
<P>0027 0008 52 output.frequency</P>
<P>0028 0012 52 input.frequency</P>
<P>0033 0016 52 battery.voltage</P>
<P>0034 0020 f0 battery.charge</P>
<P>0035 0024 e2 battery.runtime</P>
<P>0056 0028 f0 input.voltage</P>
<P>0059 0032 f0 None</P>
<P>0062 0036 f0 ambient.temperature</P>
<P>0065 0040 41 output.current</P>
<P>0068 0044 41 output.current.nominal</P>
<P>0071 0048 f0 None</P>
<P>0078 0052 f0 output.voltage</P>
<P> </P>
<P>Length of alarm map: 27</P>
<P>Index Alarm Supported</P>
<P>-001 INVERTER_AC_OVER_VOLTAGE No</P>
<P>-001 INVERTER_AC_UNDER_VOLTAGE No</P>
<P>-001 INVERTER_OVER_OR_UNDER_FREQ No</P>
<P>-001 BYPASS_AC_OVER_VOLTAGE No</P>
<P>-001 BYPASS_AC_UNDER_VOLTAGE No</P>
<P>-001 BYPASS_OVER_OR_UNDER_FREQ No</P>
<P>0000 INPUT_AC_OVER_VOLTAGE Yes</P>
<P>0001 INPUT_AC_UNDER_VOLTAGE Yes</P>
<P>0002 INPUT_UNDER_OR_OVER_FREQ Yes</P>
<P>-001 OUTPUT_OVER_VOLTAGE No</P>
<P>-001 OUTPUT_UNDER_VOLTAGE No</P>
<P>-001 OUTPUT_UNDER_OR_OVER_FREQ No</P>
<P>-001 REMOTE_EMERGENCY_PWR_OFF No</P>
<P>-001 REMOTE_GO_TO_BYPASS No</P>
<P>-001 BUILDING_ALARM_6 No</P>
<P>-001 BUILDING_ALARM_5 No</P>
<P>-001 BUILDING_ALARM_4 No</P>
<P>-001 BUILDING_ALARM_3 No</P>
<P>-001 BUILDING_ALARM_2 No</P>
<P>-001 BUILDING_ALARM_1 No</P>
<P>-001 STATIC_SWITCH_OVER_TEMP No</P>
<P>-001 CHARGER_OVER_TEMP No</P>
<P>-001 CHARGER_LOGIC_PWR_FAIL No</P>
<P>-001 CHARGER_OVER_VOLTAGE_OR_CURRENT No</P>
<P>-001 INVERTER_OVER_TEMP No</P>
<P>0003 OUTPUT_OVERLOAD Yes</P>
<P>-001 RECTIFIER_INPUT_OVER_CURRENT No</P>
<P>-001 INVERTER_OUTPUT_OVER_CURRENT No</P>
<P>-001 DC_LINK_OVER_VOLTAGE No</P>
<P>-001 DC_LINK_UNDER_VOLTAGE No</P>
<P>-001 RECTIFIER_FAILED No</P>
<P>0004 INVERTER_FAULT Yes</P>
<P>-001 BATTERY_CONNECTOR_FAIL No</P>
<P>-001 BYPASS_BREAKER_FAIL No</P>
<P>0005 CHARGER_FAIL Yes</P>
<P>-001 RAMP_UP_FAILED No</P>
<P>-001 STATIC_SWITCH_FAILED No</P>
<P>-001 ANALOG_AD_REF_FAIL No</P>
<P>-001 BYPASS_UNCALIBRATED No</P>
<P>-001 RECTIFIER_UNCALIBRATED No</P>
<P>-001 OUTPUT_UNCALIBRATED No</P>
<P>-001 INVERTER_UNCALIBRATED No</P>
<P>-001 DC_VOLT_UNCALIBRATED No</P>
<P>-001 OUTPUT_CURRENT_UNCALIBRATED No</P>
<P>-001 RECTIFIER_CURRENT_UNCALIBRATED No</P>
<P>-001 BATTERY_CURRENT_UNCALIBRATED No</P>
<P>-001 INVERTER_ON_OFF_STAT_FAIL No</P>
<P>-001 BATTERY_CURRENT_LIMIT No</P>
<P>-001 INVERTER_STARTUP_FAIL No</P>
<P>-001 ANALOG_BOARD_AD_STAT_FAIL No</P>
<P>-001 OUTPUT_CURRENT_OVER_100 No</P>
<P>-001 BATTERY_GROUND_FAULT No</P>
<P>-001 WAITING_FOR_CHARGER_SYNC No</P>
<P>-001 NV_RAM_FAIL No</P>
<P>-001 ANALOG_BOARD_AD_TIMEOUT No</P>
<P>0006 SHUTDOWN_IMMINENT Yes</P>
<P>0007 BATTERY_LOW Yes</P>
<P>0008 UTILITY_FAIL Yes</P>
<P>-001 OUTPUT_SHORT_CIRCUIT No</P>
<P>0009 UTILITY_NOT_PRESENT Yes</P>
<P>-001 FULL_TIME_CHARGING No</P>
<P>-001 FAST_BYPASS_COMMAND No</P>
<P>-001 AD_ERROR No</P>
<P>-001 INTERNAL_COM_FAIL No</P>
<P>-001 RECTIFIER_SELFTEST_FAIL No</P>
<P>-001 RECTIFIER_EEPROM_FAIL No</P>
<P>-001 RECTIFIER_EPROM_FAIL No</P>
<P>-001 INPUT_LINE_VOLTAGE_LOSS No</P>
<P>-001 BATTERY_DC_OVER_VOLTAGE No</P>
<P>-001 POWER_SUPPLY_OVER_TEMP No</P>
<P>-001 POWER_SUPPLY_FAIL No</P>
<P>-001 POWER_SUPPLY_5V_FAIL No</P>
<P>-001 POWER_SUPPLY_12V_FAIL No</P>
<P>-001 HEATSINK_OVER_TEMP No</P>
<P>-001 HEATSINK_TEMP_SENSOR_FAIL No</P>
<P>-001 RECTIFIER_CURRENT_OVER_125 No</P>
<P>-001 RECTIFIER_FAULT_INTERRUPT_FAIL No</P>
<P>-001 RECTIFIER_POWER_CAPASITOR_FAIL No</P>
<P>-001 INVERTER_PROGRAM_STACK_ERROR No</P>
<P>-001 INVERTER_BOARD_SELFTEST_FAIL No</P>
<P>-001 INVERTER_AD_SELFTEST_FAIL No</P>
<P>-001 INVERTER_RAM_SELFTEST_FAIL No</P>
<P>-001 NV_MEMORY_CHECKSUM_FAIL No</P>
<P>-001 PROGRAM_CHECKSUM_FAIL No</P>
<P>-001 INVERTER_CPU_SELFTEST_FAIL No</P>
<P>-001 NETWORK_NOT_RESPONDING No</P>
<P>-001 FRONT_PANEL_SELFTEST_FAIL No</P>
<P>-001 NODE_EEPROM_VERIFICATION_ERROR No</P>
<P>-001 OUTPUT_AC_OVER_VOLT_TEST_FAIL No</P>
<P>-001 OUTPUT_DC_OVER_VOLTAGE No</P>
<P>-001 INPUT_PHASE_ROTATION_ERROR No</P>
<P>-001 INVERTER_RAMP_UP_TEST_FAILED No</P>
<P>-001 INVERTER_OFF_COMMAND No</P>
<P>-001 INVERTER_ON_COMMAND No</P>
<P>-001 TO_BYPASS_COMMAND No</P>
<P>-001 FROM_BYPASS_COMMAND No</P>
<P>-001 AUTO_MODE_COMMAND No</P>
<P>-001 EMERGENCY_SHUTDOWN_COMMAND No</P>
<P>-001 SETUP_SWITCH_OPEN No</P>
<P>-001 INVERTER_OVER_VOLT_INT No</P>
<P>-001 INVERTER_UNDER_VOLT_INT No</P>
<P>-001 ABSOLUTE_DCOV_ACOV No</P>
<P>-001 PHASE_A_CURRENT_LIMIT No</P>
<P>-001 PHASE_B_CURRENT_LIMIT No</P>
<P>-001 PHASE_C_CURRENT_LIMIT No</P>
<P>-001 BYPASS_NOT_AVAILABLE No</P>
<P>-001 RECTIFIER_BREAKER_OPEN No</P>
<P>-001 BATTERY_CONTACTOR_OPEN No</P>
<P>-001 INVERTER_CONTACTOR_OPEN No</P>
<P>-001 BYPASS_BREAKER_OPEN No</P>
<P>-001 INV_BOARD_ACOV_INT_TEST_FAIL No</P>
<P>-001 INVERTER_OVER_TEMP_TRIP No</P>
<P>-001 INV_BOARD_ACUV_INT_TEST_FAIL No</P>
<P>-001 INVERTER_VOLTAGE_FEEDBACK_ERROR No</P>
<P>-001 DC_UNDER_VOLTAGE_TIMEOUT No</P>
<P>-001 AC_UNDER_VOLTAGE_TIMEOUT No</P>
<P>-001 DC_UNDER_VOLTAGE_WHILE_CHARGE No</P>
<P>-001 INVERTER_VOLTAGE_BIAS_ERROR No</P>
<P>-001 RECTIFIER_PHASE_ROTATION No</P>
<P>-001 BYPASS_PHASER_ROTATION No</P>
<P>-001 SYSTEM_INTERFACE_BOARD_FAIL No</P>
<P>-001 PARALLEL_BOARD_FAIL No</P>
<P>-001 LOST_LOAD_SHARING_PHASE_A No</P>
<P>-001 LOST_LOAD_SHARING_PHASE_B No</P>
<P>-001 LOST_LOAD_SHARING_PHASE_C No</P>
<P>-001 DC_OVER_VOLTAGE_TIMEOUT No</P>
<P>0010 BATTERY_TOTALLY_DISCHARGED Yes</P>
<P>-001 INVERTER_PHASE_BIAS_ERROR No</P>
<P>-001 INVERTER_VOLTAGE_BIAS_ERROR_2 No</P>
<P>-001 DC_LINK_BLEED_COMPLETE No</P>
<P>-001 LARGE_CHARGER_INPUT_CURRENT No</P>
<P>-001 INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL No</P>
<P>-001 LOSS_OF_REDUNDANCY No</P>
<P>-001 LOSS_OF_SYNC_BUS No</P>
<P>-001 RECTIFIER_BREAKER_SHUNT_TRIP No</P>
<P>-001 LOSS_OF_CHARGER_SYNC No</P>
<P>-001 INVERTER_LOW_LEVEL_TEST_TIMEOUT No</P>
<P>-001 OUTPUT_BREAKER_OPEN No</P>
<P>-001 CONTROL_POWER_ON No</P>
<P>-001 INVERTER_ON No</P>
<P>-001 CHARGER_ON No</P>
<P>-001 BYPASS_ON No</P>
<P>-001 BYPASS_POWER_LOSS No</P>
<P>-001 ON_MANUAL_BYPASS No</P>
<P>-001 BYPASS_MANUAL_TURN_OFF No</P>
<P>-001 INVERTER_BLEEDING_DC_LINK_VOLT No</P>
<P>-001 CPU_ISR_ERROR No</P>
<P>-001 SYSTEM_ISR_RESTART No</P>
<P>-001 PARALLEL_DC No</P>
<P>-001 BATTERY_NEEDS_SERVICE No</P>
<P>-001 BATTERY_CHARGING No</P>
<P>-001 BATTERY_NOT_CHARGED No</P>
<P>-001 DISABLED_BATTERY_TIME No</P>
<P>-001 SERIES_7000_ENABLE No</P>
<P>-001 OTHER_UPS_ON No</P>
<P>-001 PARALLEL_INVERTER No</P>
<P>-001 UPS_IN_PARALLEL No</P>
<P>-001 OUTPUT_BREAKER_REALY_FAIL No</P>
<P>-001 CONTROL_POWER_OFF No</P>
<P>-001 LEVEL_2_OVERLOAD_PHASE_A No</P>
<P>-001 LEVEL_2_OVERLOAD_PHASE_B No</P>
<P>-001 LEVEL_2_OVERLOAD_PHASE_C No</P>
<P>-001 LEVEL_3_OVERLOAD_PHASE_A No</P>
<P>-001 LEVEL_3_OVERLOAD_PHASE_B No</P>
<P>-001 LEVEL_3_OVERLOAD_PHASE_C No</P>
<P>-001 LEVEL_4_OVERLOAD_PHASE_A No</P>
<P>-001 LEVEL_4_OVERLOAD_PHASE_B No</P>
<P>-001 LEVEL_4_OVERLOAD_PHASE_C No</P>
<P>0011 UPS_ON_BATTERY Yes</P>
<P>-001 UPS_ON_BYPASS No</P>
<P>0012 LOAD_DUMPED Yes</P>
<P>-001 LOAD_ON_INVERTER No</P>
<P>-001 UPS_ON_COMMAND No</P>
<P>-001 UPS_OFF_COMMAND No</P>
<P>-001 LOW_BATTERY_SHUTDOWN No</P>
<P>-001 AUTO_ON_ENABLED No</P>
<P>-001 SOFTWARE_INCOMPABILITY_DETECTED No</P>
<P>-001 INVERTER_TEMP_SENSOR_FAILED No</P>
<P>-001 DC_START_OCCURED No</P>
<P>-001 IN_PARALLEL_OPERATION No</P>
<P>-001 SYNCING_TO_BYPASS No</P>
<P>-001 RAMPING_UPS_UP No</P>
<P>-001 INVERTER_ON_DELAY No</P>
<P>-001 CHARGER_ON_DELAY No</P>
<P>-001 WAITING_FOR_UTIL_INPUT No</P>
<P>-001 CLOSE_BYPASS_BREAKER No</P>
<P>-001 TEMPORARY_BYPASS_OPERATION No</P>
<P>-001 SYNCING_TO_OUTPUT No</P>
<P>-001 BYPASS_FAILURE No</P>
<P>-001 AUTO_OFF_COMMAND_EXECUTED No</P>
<P>-001 AUTO_ON_COMMAND_EXECUTED No</P>
<P>0013 BATTERY_TEST_FAILED Yes</P>
<P>-001 FUSE_FAIL No</P>
<P>0014 FAN_FAIL Yes</P>
<P>0015 SITE_WIRING_FAULT Yes</P>
<P>-001 BACKFEED_CONTACTOR_FAIL No</P>
<P>-001 ON_BUCK No</P>
<P>-001 ON_BOOST No</P>
<P>-001 ON_DOUBLE_BOOST No</P>
<P>-001 BATTERIES_DISCONNECTED No</P>
<P>-001 UPS_CABINET_OVER_TEMP No</P>
<P>-001 TRANSFORMER_OVER_TEMP No</P>
<P>-001 AMBIENT_UNDER_TEMP No</P>
<P>0016 AMBIENT_OVER_TEMP Yes</P>
<P>-001 CABINET_DOOR_OPEN No</P>
<P>-001 CABINET_DOOR_OPEN_VOLT_PRESENT No</P>
<P>-001 AUTO_SHUTDOWN_PENDING No</P>
<P>-001 TAP_SWITCHING_REALY_PENDING No</P>
<P>-001 UNABLE_TO_CHARGE_BATTERIES No</P>
<P>-001 STARTUP_FAILURE_CHECK_EPO No</P>
<P>-001 AUTOMATIC_STARTUP_PENDING No</P>
<P>-001 MODEM_FAILED No</P>
<P>-001 INCOMING_MODEM_CALL_STARTED No</P>
<P>-001 OUTGOING_MODEM_CALL_STARTED No</P>
<P>-001 MODEM_CONNECTION_ESTABLISHED No</P>
<P>-001 MODEM_CALL_COMPLETED_SUCCESS No</P>
<P> </P>
<P>Lengt of Config_block: 80</P>
<P>Length of statistics map: 0</P>
<P>Lengt of command list: 24</P>
<P>Lengt of outlet_block: 0</P>
<P>Lengt of alarm_block: 17</P>
<P>dstate_init: sock /var/run/nut/bcmxcp_usb-PowerWare open on fd 5</P>
<P> </P>
<P>-----------------------------------------</P></SPAN></DIV>
<DIV class=gmail_quote><BR>&nbsp;<BR></DIV>
<BLOCKQUOTE 
style="BORDER-LEFT: rgb(204,204,204) 1px solid; MARGIN: 0pt 0pt 0pt 0.8ex; PADDING-LEFT: 1ex" 
class=gmail_quote>
  <DIV style="PADDING-LEFT: 10px; PADDING-RIGHT: 10px; PADDING-TOP: 15px" 
  name="Compose message area">
  <DIV><FONT face="Times New Roman"></FONT></DIV>
  <DIV style="FONT: 10pt Tahoma; font-size-adjust: none; font-stretch: normal">
  <DIV></DIV>
  <DIV 
  style="BACKGROUND: rgb(245,245,245); -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial">
  <DIV><B>From:</B> <A title=greg_roll@hotmail.com 
  href="mailto:greg_roll@hotmail.com" target=_blank>Greg</A> </DIV>
  <DIV><B>Sent:</B> Wednesday, May 13, 2009 10:34 PM</DIV>
  <DIV><B>To:</B> <A title=greg_roll@hotmail.com 
  href="mailto:greg_roll@hotmail.com" target=_blank>Greg</A> ; <A 
  title=aquette.dev@gmail.com href="mailto:aquette.dev@gmail.com" 
  target=_blank>Arnaud Quette</A> </DIV>
  <DIV><B>Cc:</B> <A title=kjell.claesson@epost.tidanet.se 
  href="mailto:kjell.claesson@epost.tidanet.se" target=_blank>Kjell Claesson</A> 
  ; <A title=nut-upsuser@lists.alioth.debian.org 
  href="mailto:nut-upsuser@lists.alioth.debian.org" 
  target=_blank>nut-upsuser@lists.alioth.debian.org</A> </DIV>
  <DIV><B>Subject:</B> Re: [Nut-upsuser] Nut and PowerWare 
5115</DIV></DIV></DIV>
  <DIV><BR></DIV>
  <DIV><FONT face=Calibri>Hi Arnaud,</FONT></DIV>
  <DIV><FONT face=Calibri></FONT>&nbsp;</DIV>
  <DIV><FONT face=Calibri>Some more testing on Ubuntu 9.04.</FONT></DIV>
  <DIV><FONT face=Calibri></FONT>&nbsp;</DIV>
  <DIV><FONT face=Calibri>Here is the output of bcmxcp_usb and 
lsusb</FONT></DIV>
  <DIV><FONT face=Calibri></FONT>&nbsp;</DIV>
  <DIV><FONT 
  face=Calibri>============================================</FONT></DIV>
  <DIV><SPAN lang=EN-AU>
  <P><A href="mailto:root@Ubuntu9:/lib/nut" 
  target=_blank>root@Ubuntu9:/lib/nut</A># ./bcmxcp_usb -a PowerWare -u root</P>
  <P>Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)</P>
  <P>USB communication subdriver 0.17</P>
  <P>usb_set_debug: Setting debugging level to 3 (on)</P>
  <P>usb_os_init: Found USB VFS at /dev/bus/usb</P>
  <P>usb_os_find_busses: Found 001</P>
  <P>usb_os_find_busses: Found 002</P>
  <P>usb_os_find_devices: Found 001 on 001</P>
  <P>usb_os_find_devices: Found 003 on 002</P>
  <P>skipped 1 class/vendor specific interface descriptors</P>
  <P>usb_os_find_devices: Found 002 on 002</P>
  <P>usb_os_find_devices: Found 001 on 002</P>
  <P>error obtaining child information: Inappropriate ioctl for device</P>
  <P>root@Ubuntu9:/lib/nut# lsusb</P>
  <P>usb_set_debug: Setting debugging level to 3 (on)</P>
  <P>usb_os_init: Found USB VFS at /dev/bus/usb</P>
  <P>usb_os_find_busses: Found 001</P>
  <P>usb_os_find_busses: Found 002</P>
  <P>usb_os_find_devices: Found 001 on 001</P>
  <P>usb_os_find_devices: Found 003 on 002</P>
  <P>skipped 1 class/vendor specific interface descriptors</P>
  <P>usb_os_find_devices: Found 002 on 002</P>
  <P>usb_os_find_devices: Found 001 on 002</P>
  <P>error obtaining child information: Inappropriate ioctl for device</P>
  <P>Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub</P>
  <P>Bus 002 Device 003: ID 06da:0002 Phoenixtec Power Co., Ltd UPS</P>
  <P>Bus 002 Device 002: ID 0e0f:0002 </P>
  <P>Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub</P>
  <P>===========================================</P></SPAN></DIV>
  <DIV style="FONT: 10pt Tahoma; font-size-adjust: none; font-stretch: normal">
  <DIV><BR></DIV>
  <DIV 
  style="BACKGROUND: rgb(245,245,245); -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial">
  <DIV><B>From:</B> <A title=greg_roll@hotmail.com 
  href="mailto:greg_roll@hotmail.com" target=_blank>Greg</A> </DIV>
  <DIV><B>Sent:</B> Thursday, May 07, 2009 9:22 PM</DIV>
  <DIV><B>To:</B> <A title=aquette.dev@gmail.com 
  href="mailto:aquette.dev@gmail.com" target=_blank>Arnaud Quette</A> </DIV>
  <DIV><B>Cc:</B> <A title=kjell.claesson@epost.tidanet.se 
  href="mailto:kjell.claesson@epost.tidanet.se" target=_blank>Kjell Claesson</A> 
  ; <A title=nut-upsuser@lists.alioth.debian.org 
  href="mailto:nut-upsuser@lists.alioth.debian.org" 
  target=_blank>nut-upsuser@lists.alioth.debian.org</A> </DIV>
  <DIV><B>Subject:</B> Re: [Nut-upsuser] Nut and PowerWare 
5115</DIV></DIV></DIV>
  <DIV><BR></DIV>
  <DIV><FONT face=Calibri>Hi Arnaud,</FONT></DIV>
  <DIV style="FONT: 10pt Tahoma; font-size-adjust: none; font-stretch: normal">
  <DIV><BR></DIV>
  <DIV 
  style="BACKGROUND: rgb(245,245,245); -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial">
  <DIV><B>From:</B> <A title=aquette.dev@gmail.com 
  href="mailto:aquette.dev@gmail.com" target=_blank>Arnaud Quette</A> </DIV>
  <DIV><B>Sent:</B> Thursday, May 07, 2009 6:50 AM</DIV>
  <DIV><B>To:</B> <A title=greg_roll@hotmail.com 
  href="mailto:greg_roll@hotmail.com" target=_blank>Greg</A> </DIV>
  <DIV><B>Cc:</B> <A title=kjell.claesson@epost.tidanet.se 
  href="mailto:kjell.claesson@epost.tidanet.se" target=_blank>Kjell Claesson</A> 
  ; <A title=nut-upsuser@lists.alioth.debian.org 
  href="mailto:nut-upsuser@lists.alioth.debian.org" 
  target=_blank>nut-upsuser@lists.alioth.debian.org</A> </DIV>
  <DIV><B>Subject:</B> Re: [Nut-upsuser] Nut and PowerWare 
5115</DIV></DIV></DIV>
  <DIV><BR></DIV>Hi Greg,<BR><BR>
  <DIV class=gmail_quote>2009/5/4 Greg <SPAN dir=ltr>&lt;<A 
  href="mailto:greg_roll@hotmail.com" 
  target=_blank>greg_roll@hotmail.com</A>&gt;</SPAN><BR>
  <BLOCKQUOTE 
  style="BORDER-LEFT: rgb(204,204,204) 1px solid; MARGIN: 0pt 0pt 0pt 0.8ex; PADDING-LEFT: 1ex" 
  class=gmail_quote>
    <DIV style="PADDING-LEFT: 10px; PADDING-RIGHT: 10px; PADDING-TOP: 15px" 
    name="Compose message area">
    <DIV><FONT face=Calibri>Hi guys,</FONT></DIV>
    <DIV><FONT face=Calibri></FONT>&nbsp;</DIV>
    <DIV><FONT face=Calibri>I installed Nut 2.4.1_4 on Ubuntu 9.04 and I have 
    similar issues. If I run upsdrvctl start I get</FONT></DIV>
    <DIV><FONT face=Calibri></FONT>&nbsp;</DIV></DIV></BLOCKQUOTE>
  <DIV><BR>2.4.1-2ubuntu4 you mean (the one that is available in the 
  distro)?<BR>have you tried to unplug and plug back the USB cord of the UPS? 
  otherwise, try this and relaunch upsdrvctl or bcmxcp_usb<BR></DIV>
  <DIV><FONT face=Calibri>Sorry yes I&nbsp;installed the package from the 
  distro. I&nbsp;have unplugged and plugged back in the UPS but get the same 
  issue.</FONT></DIV>
  <DIV>&nbsp;</DIV>
  <DIV><FONT face=Calibri>I am creating a new install of Ubuntu 9.04 and will 
  test again.</FONT>&nbsp;</DIV><FONT face=Calibri></FONT></DIV>
  <DIV class=gmail_quote>
  <DIV><BR></DIV>
  <BLOCKQUOTE 
  style="BORDER-LEFT: rgb(204,204,204) 1px solid; MARGIN: 0pt 0pt 0pt 0.8ex; PADDING-LEFT: 1ex" 
  class=gmail_quote>
    <DIV style="PADDING-LEFT: 10px; PADDING-RIGHT: 10px; PADDING-TOP: 15px" 
    name="Compose message area"><FONT face=Calibri></FONT><FONT 
    face=Calibri></FONT>
    <DIV></DIV>
    <DIV><FONT face=Calibri>==============================</FONT></DIV>
    <DIV>
    <DIV><FONT face=Calibri></FONT>&nbsp;</DIV>
    <DIV><FONT face=Calibri>Can't set POWERWARE USB configuration<BR>Unable to 
    find POWERWARE UPS device on USB bus 
    <DIV>&nbsp;</DIV>
    <DIV class=gmail_quote><FONT face=Calibri>Things to try:</FONT></DIV>
    <DIV>&nbsp;</DIV>
    <DIV class=gmail_quote><FONT face=Calibri>&nbsp;- Connect UPS device to USB 
    bus</FONT></DIV>
    <DIV>&nbsp;</DIV>
    <DIV class=gmail_quote><FONT face=Calibri>&nbsp;- Run this driver as another 
    user (upsdrvctl -u or 'user=...' in ups.conf).<BR>&nbsp;&nbsp; See 
    upsdrvctl(8) and ups.conf(5).</FONT></DIV>
    <DIV>&nbsp;</DIV>
    <DIV class=gmail_quote><FONT face=Calibri>Fatal error: unusable 
    configuration<BR>CLOSING</FONT></DIV></FONT></DIV>
    <DIV><FONT face=Calibri></FONT>&nbsp;</DIV></DIV>
    <DIV><FONT face=Calibri>==============================</FONT></DIV>
    <DIV><FONT face=Calibri></FONT>&nbsp;</DIV>
    <DIV><FONT face=Calibri>I am unable to run /lib/nut/bcmxcp_usb -a PowerWare 
    -u root as none of the files in /lib/nut appear as executable.</FONT></DIV>
    <DIV><FONT face=Calibri></FONT>&nbsp;</DIV>
    <DIV><FONT face=Calibri>Any thoughts?</FONT></DIV>
    <DIV><FONT face=Calibri></FONT>&nbsp;</DIV></DIV></BLOCKQUOTE>
  <DIV><BR>I've just checked again, and all the files in /lib/nut are executable 
  in a fresh jaunty install.<BR>otherwise, you wouldn't have been able to run 
  the driver nor get the above output!<BR>so I found this strange, you should 
  check again... it's probably the devices privileges mentioned above.<BR>and 
  this one is possibly due to a bug in the package.<BR><BR></DIV></DIV>
  <DIV>we seem to face a completely different issue here than the one on the 
  QNAP.<BR>I'd first like to be sure that you're unit is working (or not) in 
  jaunty before getting back to the QNAP.<BR><BR>I've just checked the code 
  (which has been revamped), and the specific part seem similar (can't be 100% 
  sure though). now, I'll have to add some more trace to get more 
  visibility.<BR>I'll probably ping you tomorrow to test the latest subversion 
  trunk. ok with that method?<BR></DIV>
  <DIV><FONT face=Calibri>Yes that will be fine. I will be away from home the 
  next 3 days but I will test when I return.</FONT></DIV>
  <DIV><FONT face=Calibri></FONT>&nbsp;</DIV>
  <DIV><FONT face=Calibri>Thanks again for your help.</FONT></DIV>
  <DIV><FONT face=Calibri></FONT>&nbsp;</DIV>
  <DIV><BR>Arnaud<BR></DIV></DIV></BLOCKQUOTE><BR><BR 
clear=all>cheers,<BR>Arnaud<BR>-- <BR>Linux / Unix Expert R&amp;D - Eaton - <A 
href="http://www.eaton.com/mgeops">http://www.eaton.com/mgeops</A><BR>Network 
UPS Tools (NUT) Project Leader - <A 
href="http://www.networkupstools.org/">http://www.networkupstools.org/</A><BR>Debian 
Developer - <A href="http://www.debian.org">http://www.debian.org</A><BR>Free 
Software Developer - <A 
href="http://arnaud.quette.free.fr/">http://arnaud.quette.free.fr/</A><BR><BR><BR>
<BR>
__________ Information from ESET Smart Security, version of virus signature database 4109 (20090527) __________<BR>
<BR>
The message was checked by ESET Smart Security.<BR>
<BR>
<A HREF="http://www.eset.com">http://www.eset.com</A><BR>


</BODY></HTML>