All:<br><br>I am having a devil of a time getting nut to work on freebsd. Here is what I have done. I am trying to load the drivers, and here is my ups.conf file:<br><br>[tripplite]<br> driver=trippliteesu<br> port=auto<br>
<br>When I dmesg on freebsd 7.1 for my usb device:<br><br>uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.00, addr 2> on uhub0<br><br>using the usbdevs -v command:<br><br>Controller /dev/usb0:<br>addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00<br>
port 1 addr 2: low speed, self powered, config 1, TRIPP LITE UPS(0x4003), Tripp Lite(0x09ae), rev 0.00<br><br>I have tried usbhid-ups, tripplite_usb, and tripplite_esu with varying combinations of port, driver, and vendorid (4003 and 09ae). I have tried using -u root -DDDD nothing works, I have tried using the -x options, still fails. I really am at wits end on how to even get this thing working.<br>
<br>Any ideas would be greatly appreciated. Even better a working ups.conf file, and startup scripts would be welcome.<br><br>Thomas<br clear="all"><br>-- <br>-----------------------<br>Two Wheels Good, Four Wheels Bad<br>