[Parted-maintainers] parted_1.8.7.git.2007.07.30-1_i386.changes is NEW

Tue Jul 31 00:17:06 UTC 2007

(new) libparted-1.8-7_1.8.7.git.2007.07.30-1_i386.deb optional libs
The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.
(new) libparted-1.8-dbg_1.8.7.git.2007.07.30-1_i386.deb extra libdevel
The GNU Parted disk partitioning library debug development files
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains the debugging static library for
 libparted, which are really only of interest to parted
 developers who need to debug their programs.
 .
 The debugging libraries are installed as /usr/lib/libparted_g.a
 Link specifically with them if you want to debug.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.
(new) libparted-1.8-dev_1.8.7.git.2007.07.30-1_i386.deb optional libdevel
The GNU Parted disk partitioning library development files
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains the static library and header files
 for libparted, which are really only of interest to parted
 developers.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.
(new) libparted-1.8-i18n_1.8.7.git.2007.07.30-1_all.deb optional libs
The GNU Parted disk partitioning library i18n support
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains the i18n message catalogs for
 libparted and parted.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.
(new) libparted-1.8-udeb_1.8.7.git.2007.07.30-1_i386.udeb extra debian-installer
The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.
parted-doc_1.8.7.git.2007.07.30-1_all.deb
  to pool/main/p/parted/parted-doc_1.8.7.git.2007.07.30-1_all.deb
parted-udeb_1.8.7.git.2007.07.30-1_i386.udeb
  to pool/main/p/parted/parted-udeb_1.8.7.git.2007.07.30-1_i386.udeb
parted_1.8.7.git.2007.07.30-1.diff.gz
  to pool/main/p/parted/parted_1.8.7.git.2007.07.30-1.diff.gz
parted_1.8.7.git.2007.07.30-1.dsc
  to pool/main/p/parted/parted_1.8.7.git.2007.07.30-1.dsc
parted_1.8.7.git.2007.07.30-1_i386.deb
  to pool/main/p/parted/parted_1.8.7.git.2007.07.30-1_i386.deb
parted_1.8.7.git.2007.07.30.orig.tar.gz
  to pool/main/p/parted/parted_1.8.7.git.2007.07.30.orig.tar.gz
Changes: parted (1.8.7.git.2007.07.30-1) experimental; urgency=low
 .
  * New upstream release.
 .
  [ Xavier Oswald ]
  * debian/README.Debian updated
  * debian/parted-doc.docs updated
 .
  [ Otavio Salvador ]
  * Package Patches:
    - doc-package.dpatch: redone from scratch;
    - s390.dpatch: dropped, equivalent code merged upstream;
    - parted-print-name.dpatch: likewise.
    - errors-to-stderr.dpatch: likewise.
    - devfs.dpatch: rediff.
    - sparc-fix-raid.dpatch: likewise.
    - lvm2.dpatch: readd the missing parts for the LVM partitions
      probing;
  * debian/rules:
    - configure called with --enable-device-mapper to include
      device-mapper support in;
    - build gnulib when building udeb and debugging packages otherwise
      they'd fail;
    - change soname version;
  * debian/control:
    - add libdevmapper-dev as build-dependency;
    - add pkg-config as build-dependency;
    - cleanup udeb dependencies. Thanks to Frans Pop <elendil at planet.nl>
      by the patch; (Closes: #419609)
  * debian/watch: use the GNU ftp since the HTTP address was giving
    timeout;
  * debian/libparted-dev.files: stop to provide parted.m4 but provides
    pkgconfig, instead;
  * debian/parted-doc.docs: drop COPYING;
  * debian/copyright: updated since parted is now licensed on GPL3;
  * debian/rules: change package names to follow soname;

Override entries for your package:
parted-doc_1.8.7.git.2007.07.30-1_all.deb - optional doc
parted-udeb_1.8.7.git.2007.07.30-1_i386.udeb - extra debian-installer
parted_1.8.7.git.2007.07.30-1.dsc - source admin
parted_1.8.7.git.2007.07.30-1_i386.deb - optional admin

Announcing to debian-devel-changes at lists.debian.org
Closing bugs: 419609 

Your package contains new components which requires manual editing of
the override file.  It is ok otherwise, so please be patient.  New
packages are usually added to the override file about once a week.

You may have gotten the distribution wrong.  You'll get warnings above
if files already exist in other distributions.