[Parted-maintainers] parted_2.1-1_amd64.changes is NEW
Archive Administrator
installer at ftp-master.debian.org
Sat Feb 6 19:32:17 UTC 2010
(new) libparted-2.1-0-udeb_2.1-1_amd64.udeb extra debian-installer
The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
(new) libparted-2.1-0_2.1-1_amd64.deb optional libs
The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
(new) libparted-2.1-dbg_2.1-1_amd64.deb extra debug
The GNU Parted disk partitioning library debug development files
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains the debugging static library for
libparted, which are really only of interest to parted
developers who need to debug their programs.
.
The debugging libraries are installed as /usr/lib/libparted_g.a
Link specifically with them if you want to debug.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
(new) libparted-2.1-dev_2.1-1_amd64.deb optional libdevel
The GNU Parted disk partitioning library development files
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains the static library and header files
for libparted, which are really only of interest to parted
developers.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
(new) libparted-2.1-i18n_2.1-1_all.deb optional localization
The GNU Parted disk partitioning library i18n support
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks.
.
This package contains the i18n message catalogs for
libparted and parted.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
parted-doc_2.1-1_all.deb
to main/p/parted/parted-doc_2.1-1_all.deb
parted-udeb_2.1-1_amd64.udeb
to main/p/parted/parted-udeb_2.1-1_amd64.udeb
parted_2.1-1.diff.gz
to main/p/parted/parted_2.1-1.diff.gz
parted_2.1-1.dsc
to main/p/parted/parted_2.1-1.dsc
parted_2.1-1_amd64.deb
to main/p/parted/parted_2.1-1_amd64.deb
parted_2.1.orig.tar.gz
to main/p/parted/parted_2.1.orig.tar.gz
Changes: parted (2.1-1) experimental; urgency=low
.
* New upstream release
.
[ Otavio Salvador ]
* control.in: bump preferred soname for libreadline (closes: #553824).
.
[ Colin Watson ]
* control.in: Remove copy-and-paste error from libparted1.8-i18n
description (closes: #497626).
* copyright: Document parted.info's licence, namely GFDL 1.1 with no
invariant sections, front-cover texts, or back-cover texts (closes:
#500201).
* rules: Cell partition tables are misdetected as pc98, so disable pc98
support on powerpc (closes: #487833).
* control.in: Don't build-depend on libdevmapper-dev on hurd-i386.
* control.in: Build-depend on libdevmapper-dev (>= 1.02.33), for
dm_task_set_major_minor.
.
[ Xavier Oswald ]
* debian/control.in:
- Change my mail address
- Bump Standards-Version to 3.8.3
- Update Build-Depends on debhelper 7
* debian/compat: update version to 7
* Parted not informing the kernel of changes to the partition table
(Closes: #557044), fixed upstream
.
[ Otavio Salvador ]
* debian/watch: fix URL to download
* Switch to quilt to manage patches
- unpartitioned-disks.dpatch, drop (merged upstream)
- unblacklist-md.dpatch, drop (merged upstream)
- amiga-raid-lvm-fix.dpatch, drop (not used for ages)
- devfs.dpatch, drop (devfs is not used)
- reiserfs-libname.dpatch, drop (referenced library is unavailable)
.
[ Xavier Oswald, Colin Watson ]
* Refresh update-ext4-code.patch
.
[ Otavio Salvador ]
* Fix parted-doc info files installation
* Add lintian overrides for parted package
* Use soname in libparted udeb name
Override entries for your package:
parted-doc_2.1-1_all.deb - optional doc
parted-udeb_2.1-1_amd64.udeb - extra debian-installer
parted_2.1-1.dsc - source admin
parted_2.1-1_amd64.deb - optional admin
Announcing to debian-devel-changes at lists.debian.org
Closing bugs: 487833 497626 500201 553824 557044
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
More information about the Parted-maintainers
mailing list