Bug#658050: FTBFS: miniperl Out of memory during list extend at make_patchnum.pl line 126.
Thorsten Glaser
tg at mirbsd.de
Mon Jan 30 23:27:40 UTC 2012
Source: perl
Version: 5.14.2-7
Severity: important
Justification: fails to build from source (but built successfully in the past)
Something changed between 5.14.2-6 (built fine) and 5.14.2-7 (dies
with the same error, in the same place, two times in a row).
The machine in question has the maximum amount of memory the platform
(Atari) supports: 14 MiB ST-RAM and 768 MiB TT-RAM. It also has 2 GiB
of swap. The syslog doesn’t show the OOM killer being triggered.
Full build log attached.
-- System Information:
Debian Release: wheezy/sid
APT prefers unreleased
APT policy: (500, 'unreleased'), (500, 'unstable')
Architecture: m68k
Kernel: Linux 3.2.0-1+m68k.1-atari
Locale: LANG=C, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/mksh-static
-------------- next part --------------
I: Using pkgname logfile
I: Current time: Mon Jan 30 17:05:48 UTC 2012
I: pbuilder-time-stamp: 1327943148
I: Obtaining the cached apt archive contents
I: Installing the build-deps
W: no hooks of type D found -- ignoring
-> Attempting to parse the build-deps
-> Considering build-dep file
-> Trying file
-> Considering build-dep cpio (>= 2.6-5)
-> Trying cpio
-> Considering build-dep libdb-dev
-> Trying libdb-dev
-> Considering build-dep libgdbm-dev
-> Trying libgdbm-dev
-> Considering build-dep netbase [!hurd-any]
-> Trying netbase
-> Considering build-dep gcc (>= 4:4.2)
-> Trying gcc
-> Considering build-dep procps [!hurd-any]
-> Trying procps
-> Considering build-dep zlib1g-dev | libz-dev
-> Trying zlib1g-dev
-> Considering build-dep libbz2-dev
-> Trying libbz2-dev
-> Considering build-dep dpkg-dev (>= 1.16.0)
-> Trying dpkg-dev
-> Installing file cpio libdb-dev libgdbm-dev netbase gcc procps zlib1g-dev libbz2-dev dpkg-dev
Reading package lists...
Building dependency tree...
Reading state information...
Starting
Starting 2
Done
file is already the newest version.
file set to manually installed.
gcc is already the newest version.
dpkg-dev is already the newest version.
Suggested packages:
libarchive1 db5.1-doc
Recommended packages:
libgpm2 ifupdown psmisc
The following NEW packages will be installed:
cpio libbz2-dev libdb-dev libdb5.1-dev libgdbm-dev libncursesw5 libprocps0
netbase procps zlib1g-dev
0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/1825 kB of archives.
After this operation, 4803 kB of additional disk space will be used.
Selecting previously unselected package libncursesw5.
(Reading database ... 12001 files and directories currently installed.)
Unpacking libncursesw5 (from .../libncursesw5_5.9-4_m68k.deb) ...
Selecting previously unselected package libprocps0.
Unpacking libprocps0 (from .../libprocps0_1%3a3.3.2-3_m68k.deb) ...
Selecting previously unselected package cpio.
Unpacking cpio (from .../archives/cpio_2.11-7_m68k.deb) ...
Selecting previously unselected package netbase.
Unpacking netbase (from .../archives/netbase_4.47_all.deb) ...
Selecting previously unselected package procps.
Unpacking procps (from .../procps_1%3a3.3.2-3_m68k.deb) ...
Selecting previously unselected package libbz2-dev.
Unpacking libbz2-dev (from .../libbz2-dev_1.0.6-1_m68k.deb) ...
Selecting previously unselected package libgdbm-dev.
Unpacking libgdbm-dev (from .../libgdbm-dev_1.8.3-10_m68k.deb) ...
Selecting previously unselected package zlib1g-dev.
Unpacking zlib1g-dev (from .../zlib1g-dev_1%3a1.2.3.4.dfsg-3_m68k.deb) ...
Selecting previously unselected package libdb5.1-dev.
Unpacking libdb5.1-dev (from .../libdb5.1-dev_5.1.29-1_m68k.deb) ...
Selecting previously unselected package libdb-dev.
Unpacking libdb-dev (from .../libdb-dev_5.1.4_all.deb) ...
Processing triggers for man-db ...
Setting up libncursesw5 (5.9-4) ...
Setting up libprocps0 (1:3.3.2-3) ...
Setting up cpio (2.11-7) ...
update-alternatives: using /bin/mt-gnu to provide /bin/mt (mt) in auto mode.
Setting up netbase (4.47) ...
Setting up procps (1:3.3.2-3) ...
update-alternatives: using /usr/bin/w.procps to provide /usr/bin/w (w) in auto mode.
Setting up libbz2-dev (1.0.6-1) ...
Setting up libgdbm-dev (1.8.3-10) ...
Setting up zlib1g-dev (1:1.2.3.4.dfsg-3) ...
Setting up libdb5.1-dev (5.1.29-1) ...
Setting up libdb-dev (5.1.4) ...
-> Considering libfile-sharedir-perl
I: libfile-sharedir-perl package is not installed, no need to remove
-> Considering libterm-readline-gnu-perl
Tried versions: 1.19-1
I: Satisfies version, not trying
-> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
Starting
Starting 2
Done
fakeroot is already the newest version.
debhelper is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
I: Copying back the cached apt archive contents
I: Copying source file
I: copying [/root/perl_5.14.2-7.dsc]
I: copying [/root/perl_5.14.2.orig.tar.bz2]
I: copying [/root/perl_5.14.2-7.debian.tar.gz]
I: Extracting source
gpgv: keyblock resource `/tmp/buildd/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Sat Jan 28 22:31:50 2012 UTC using DSA key ID 5178E2A5
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./perl_5.14.2-7.dsc
dpkg-source: info: extracting perl in perl-5.14.2
dpkg-source: info: unpacking perl_5.14.2.orig.tar.bz2
dpkg-source: info: unpacking perl_5.14.2-7.debian.tar.gz
dpkg-source: info: applying debian/arm_thread_stress_timeout.diff
dpkg-source: info: applying debian/cpan_definstalldirs.diff
dpkg-source: info: applying debian/db_file_ver.diff
dpkg-source: info: applying debian/doc_info.diff
dpkg-source: info: applying debian/enc2xs_inc.diff
dpkg-source: info: applying debian/errno_ver.diff
dpkg-source: info: applying debian/libperl_embed_doc.diff
dpkg-source: info: applying fixes/respect_umask.diff
dpkg-source: info: applying debian/writable_site_dirs.diff
dpkg-source: info: applying debian/extutils_set_libperl_path.diff
dpkg-source: info: applying debian/no_packlist_perllocal.diff
dpkg-source: info: applying debian/prefix_changes.diff
dpkg-source: info: applying debian/fakeroot.diff
dpkg-source: info: applying debian/instmodsh_doc.diff
dpkg-source: info: applying debian/ld_run_path.diff
dpkg-source: info: applying debian/libnet_config_path.diff
dpkg-source: info: applying debian/m68k_thread_stress.diff
dpkg-source: info: applying debian/mod_paths.diff
dpkg-source: info: applying debian/module_build_man_extensions.diff
dpkg-source: info: applying debian/prune_libs.diff
dpkg-source: info: applying fixes/net_smtp_docs.diff
dpkg-source: info: applying debian/perlivp.diff
dpkg-source: info: applying debian/disable-zlib-bundling.diff
dpkg-source: info: applying debian/cpanplus_definstalldirs.diff
dpkg-source: info: applying debian/cpanplus_config_path.diff
dpkg-source: info: applying debian/deprecate-with-apt.diff
dpkg-source: info: applying fixes/hurd-ccflags.diff
dpkg-source: info: applying debian/squelch-locale-warnings.diff
dpkg-source: info: applying debian/skip-upstream-git-tests.diff
dpkg-source: info: applying fixes/extutils-cbuilder-cflags.diff
dpkg-source: info: applying fixes/module-build-home-directory.diff
dpkg-source: info: applying debian/patchlevel.diff
dpkg-source: info: applying fixes/h2ph-multiarch.diff
dpkg-source: info: applying fixes/index-tainting.diff
dpkg-source: info: applying debian/skip-kfreebsd-crash.diff
dpkg-source: info: applying fixes/document_makemaker_ccflags.diff
dpkg-source: info: applying fixes/sys-syslog-socket-timeout-kfreebsd.patch
dpkg-source: info: applying fixes/hurd-hints.diff
dpkg-source: info: applying fixes/pod_fixes.diff
dpkg-source: info: applying debian/find_html2text.diff
dpkg-source: info: applying fixes/digest_eval_hole.diff
dpkg-source: info: applying fixes/hurd-ndbm.diff
dpkg-source: info: applying fixes/sysconf.t-posix.diff
dpkg-source: info: applying fixes/hurd-largefile.diff
dpkg-source: info: applying debian/hurd_test_todo_syslog.diff
dpkg-source: info: applying fixes/hurd_skip_itimer_virtual.diff
dpkg-source: info: applying debian/hurd_test_skip_sigdispatch.diff
dpkg-source: info: applying debian/hurd_test_skip_stack.diff
dpkg-source: info: applying debian/hurd_test_skip_pipe.diff
dpkg-source: info: applying debian/hurd_test_skip_io_pipe.diff
dpkg-source: info: applying fixes/manpage_name_CPAN.diff
dpkg-source: info: applying fixes/manpage_name_CPANPLUS.diff
dpkg-source: info: applying fixes/manpage_name_Test-Harness.diff
dpkg-source: info: applying fixes/manpage_name_Term-UI.diff
dpkg-source: info: applying fixes/podlators_ae_ligature_fallback.diff
dpkg-source: info: applying fixes/fsf_postal_address.diff
dpkg-source: info: applying fixes/cpan_module_pod_fixes.diff
I: Building the package
W: no hooks of type A found -- ignoring
I: Running cd tmp/buildd/*/ && dpkg-buildpackage -us -uc -B -m'Thorsten Glaser <tg at mirbsd.de>' -B -m'Thorsten Glaser <tg at mirbsd.de>' -B -rfakeroot
dpkg-buildpackage: source package perl
dpkg-buildpackage: source version 5.14.2-7
dpkg-source --before-build perl-5.14.2
dpkg-buildpackage: host architecture m68k
dpkg-source: info: using options from perl-5.14.2/debian/source/options: --tar-ignore=debian/.git-dpm
fakeroot debian/rules clean
test -d debian
test `id -u` -eq 0
test -f debian/patches/series # maintainer sanity check
[ ! -f Makefile ] || /usr/bin/make distclean
rm -rf config.over perl.static perl.debug libperl-static libperl.so* \
patchlevel-debian.h build-stamp install-stamp t/auto debian/shlibs.local \
debian/perl-base.shlibs debian/libperl5.14.shlibs \
debian/substvars debian/files debian/list.tmp debian/tmp debian/build
# <https://rt.cpan.org/Public/Bug/Display.html?id=68214>
rm -f cpan/DB_File/DB_File.pm.bak cpan/DB_File/t/db-btree.t.bak \
cpan/DB_File/t/db-hash.t.bak cpan/DB_File/t/db-recno.t.bak
debian/rules build
test -d debian
test -f debian/patches/series # maintainer sanity check
debian/gen-patchlevel -p DEBPKG: -v 5.14.2-7 debian/patches/series > patchlevel-debian.h
test -d debian
rm -f libperl.so* # must be built last
[ ! -f Makefile ] || /usr/bin/make distclean
[ -f patchlevel-debian.h ] || touch patchlevel-debian.h
/bin/bash debian/config.debian --static
First let's make sure your kit is complete. Checking...
Locating common programs...
Configure: line 2454: less: command not found
Checking compatibility between /bin/echo and builtin echo (if any)...
Symbolic links are supported.
Checking how to test for symbolic links...
You can test for symbolic links with 'test -h'.
Good, your tr supports [:lower:] and [:upper:] to convert case.
Using [:upper:] and [:lower:] to convert case.
3b1 dragonfly irix_6_0 opus super-ux
aix dynix irix_6_1 os2 svr4
aix_3 dynixptx isc os390 svr5
aix_4 epix isc_2 os400 ti1500
altos486 esix4 linux posix-bc titanos
amigaos fps lynxos powerux ultrix_4
atheos freebsd midnightbsd qnx umips
aux_3 genix mips rhapsody unicos
beos gnu mirbsd riscos unicosmk
bsdos gnukfreebsd mpc sco unisysdynix
catamount gnuknetbsd mpeix sco_2_3_0 utekv
convexos greenhills ncr_tower sco_2_3_1 uts
cxux haiku netbsd sco_2_3_2 uwin
cygwin hpux newsos4 sco_2_3_3 vmesa
darwin i386 next_3 sco_2_3_4 vos
dcosx interix next_3_0 solaris_2
dec_osf irix_4 next_4 stellar
dgux irix_5 nonstopux sunos_4_0
dos_djgpp irix_6 openbsd sunos_4_1
Which of these apply, if any? [linux]
You appear to have ELF support. I'll try to use it for dynamic loading.
If dynamic loading doesn't work, read hints/linux.sh for further information.
Operating system name? [linux]
Operating system version? [3.2.0-1+m68k.1-atari]
Installation prefix to use? (~name ok) [/usr]
AFS does not seem to be running...
What installation prefix should I use for installing files? (~name ok)
[/usr]
Build Perl for SOCKS? [n]
Use the PerlIO abstraction layer? [y]
Getting the current patchlevel...
Build a threading Perl? [y]
Use which C compiler? [cc]
Checking for GNU cc in disguise and/or its version number...
Now, how can we feed standard input to your C preprocessor...
Directories to use for library searches?
[/usr/local/lib /lib/m68k-linux-gnu /lib /usr/lib/m68k-linux-gnu /usr/lib]
What is the file extension used for shared libraries? [so]
Try to use long doubles if available? [n]
Checking for optional libraries...
What libraries to use?
[-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt]
What optimizer/debugger flag should be used? [-O2]
Any additional cc flags?
[-D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include]
Let me guess what the preprocessor flags are...
Any additional ld flags (NOT including libraries)?
[ -fstack-protector -L/usr/local/lib]
Checking your choice of C compiler and flags for coherency...
Computing filename position in cpp output for #include directives...
<stdlib.h> found.
Checking to see how big your integers are...
Checking to see if you have long long...
Checking to see how big your long longs are...
<inttypes.h> found.
Checking to see if you have int64_t...
Checking which 64-bit integer type we could use...
We could use 'long long' for 64-bit integers.
Try to use 64-bit integers, if available? [y]
Try to use maximal 64-bit support, if available? [n]
Checking to see how big your double precision numbers are...
Checking to see if you have long double...
Checking to see how big your long doubles are...
What is your architecture name [m68k-linux-gnu]
Threads selected.
....setting architecture name to m68k-linux-gnu-thread.
Multiplicity selected.
....setting architecture name to m68k-linux-gnu-thread-multi.
64 bit integers selected.
....setting architecture name to m68k-linux-gnu-thread-multi-64int.
Perlio selected.
Pathname where the public executables will reside? (~name ok) [/usr/bin]
Use relocatable @INC? [n]
Pathname where the private library files will reside? (~name ok)
[/usr/share/perl/5.14]
Where do you want to put the public architecture-dependent libraries? (~name ok)
[/usr/lib/perl/5.14]
Other username to test security of setuid scripts with? [none]
Well, the recommended value is *not* secure.
Does your kernel have *secure* setuid scripts? [n]
Installation prefix to use for add-on modules and utilities? (~name ok)
[/usr/local]
Pathname for the site-specific library files? (~name ok)
[/usr/local/share/perl/5.14.2]
List of earlier versions to include in @INC? [none]
<malloc/malloc.h> NOT found.
<malloc.h> found.
Checking to see how well your C compiler groks the void type...
Good. It appears to support void to the level perl5 wants.
Checking to see how big your pointers are...
Do you wish to wrap malloc calls to protect against potential overflows? [y]
Do you wish to attempt to use the malloc that comes with perl5? [n]
Your system wants malloc to return 'void *', it would seem.
Your system uses void free(), it would seem.
Pathname for the site-specific architecture-dependent library files? (~name ok)
[/usr/local/lib/perl/5.14.2]
Do you want to configure vendor-specific add-on directories? [y]
Installation prefix to use for vendor-supplied add-ons? (~name ok) [/usr]
Pathname for the vendor-supplied library files? (~name ok)
[/usr/share/perl5]
Pathname for vendor-supplied architecture-dependent files? (~name ok)
[/usr/lib/perl5]
Colon-separated list of additional directories for perl to search? [none]
Checking out function prototypes...
Support DTrace if available? [n]
Install any extra modules (y or n)? [n]
Directory for the main Perl5 html pages? (~name ok) [none]
Directory for the Perl5 module html pages? (~name ok) [none]
Checking for GNU C Library...
Shall I use /usr/bin/nm to extract C symbols from the libraries? [n]
<dld.h> NOT found.
Checking for C++...
dlopen() found.
<unistd.h> found.
Do you wish to use dynamic loading? [y]
Source file to use for dynamic loading [ext/DynaLoader/dl_dlopen.xs]
Any special flags to pass to cc -c to compile shared library modules?
[-fPIC]
What command should be used to create dynamic libraries? [cc]
Any special flags to pass to cc to create a dynamically loaded library?
[-shared -O2 -g -L/usr/local/lib -fstack-protector]
Any special flags to pass to cc to use dynamic linking? [-Wl,-E]
Build a shared libperl.so (y/n) [n]
System manual is in /usr/share/man/man1.
Where do the main Perl5 manual pages (source) go? (~name ok)
[/usr/share/man/man1]
What suffix should be used for the main Perl5 man pages? [1]
You can have filenames longer than 14 characters.
Where do the perl5 library man pages (source) go? (~name ok)
[/usr/share/man/man3]
What suffix should be used for the perl5 library man pages? [3perl]
Figuring out host name...
Your host name appears to be "ara5.mirbsd.org". Right? [y]
What is your domain name? [.mirbsd.org]
What is your e-mail address? [pbuilder at ara5.mirbsd.org]
Perl administrator e-mail address [pbuilder at ara5.mirbsd.org]
Do you want to install only the version-specific parts of perl? [n]
What shall I put after the #! to start up perl ("none" to not use #!)?
[/usr/bin/perl]
Where do you keep publicly executable scripts? (~name ok) [/usr/bin]
Pathname where the add-on public executables should be installed? (~name ok)
[/usr/local/bin]
Pathname where the site-specific html pages should be installed? (~name ok)
[none]
Pathname where the site-specific library html pages should be installed? (~name ok)
[none]
Pathname where the site-specific manual pages should be installed? (~name ok)
[/usr/local/man/man1]
Pathname where the site-specific library manual pages should be installed? (~name ok)
[/usr/local/man/man3]
Pathname where add-on public executable scripts should be installed? (~name ok)
[/usr/local/bin]
Use the "fast stdio" if available? [n]
off_t found.
Checking to see how big your file offsets are...
fpos_t found.
Checking the size of fpos_t...
Try to understand large files, if available? [y]
Rechecking to see how big your file offsets are...
Rechecking the size of fpos_t... 16 bytes.
Pathname for the vendor-supplied executables directory? (~name ok)
[/usr/bin]
Pathname for the vendor-supplied html pages? (~name ok) [none]
Pathname for the vendor-supplied html pages? (~name ok) [none]
Pathname for the vendor-supplied manual section 1 pages? (~name ok)
[/usr/share/man/man1]
Pathname for the vendor-supplied manual section 3 pages? (~name ok)
[/usr/share/man/man3]
Pathname for the vendor-supplied scripts directory? (~name ok) [/usr/bin]
Using <string.h> instead of <strings.h>.
qgcvt() found.
Checking how to print long doubles...
gconvert NOT found.
gcvt() found.
I'll use gcvt to convert floats into a string.
fwalk() NOT found.
access() found.
<sys/file.h> defines the *_OK access constants.
accessx() NOT found.
aintl() NOT found.
alarm() found.
ctime64() NOT found.
localtime64() NOT found.
gmtime64() NOT found.
mktime64() NOT found.
difftime64() NOT found.
asctime64() NOT found.
<pthread.h> found.
<sys/types.h> found.
<sys/select.h> found.
Testing to see if we should include <time.h>, <sys/time.h> or both.
We'll include <time.h>.
We'll include <sys/time.h>.
Checking to see if your struct tm has tm_zone field...
Checking to see if your struct tm has tm_gmtoff field...
asctime_r() found.
atolf() NOT found.
atoll() found.
Checking whether your compiler can handle __attribute__((format)) ...
Checking whether your compiler allows __printf__ format to be null ...
Checking whether your compiler can handle __attribute__((malloc)) ...
Checking whether your compiler can handle __attribute__((nonnull(1))) ...
Checking whether your compiler can handle __attribute__((noreturn)) ...
Checking whether your compiler can handle __attribute__((pure)) ...
Checking whether your compiler can handle __attribute__((unused)) ...
Checking whether your compiler can handle __attribute__((deprecated)) ...
Checking whether your compiler can handle __attribute__((warn_unused_result)) ...
bcmp() found.
bcopy() found.
getpgrp() found.
You have to use getpgrp() instead of getpgrp(pid).
setpgrp() found.
You have to use setpgrp() instead of setpgrp(pid,pgrp).
Checking whether your compiler can handle __builtin_choose_expr ...
Checking whether your compiler can handle __builtin_expect ...
bzero() found.
<stdarg.h> found.
<varargs.h> found.
We'll include <stdarg.h> to get va_dcl definition.
You have <stdarg.h> and <stdlib.h>, so checking for C99 variadic macros.
You have C99 variadic macros.
You have void (*signal())().
Checking whether your C compiler can cast large floats to int32.
Checking whether your C compiler can cast negative float to unsigned.
vprintf() found.
Your vsprintf() returns (int).
chown() found.
chroot() found.
chsize() NOT found.
class() NOT found.
clearenv() found.
Hmm... Looks like you have Berkeley networking support.
socketpair() found.
Checking the availability sa_len in the sock struct ...
Checking the availability sin6_scope_id in struct sockaddr_in6 ...
Checking the availability of certain socket constants...
<sys/uio.h> found.
Checking to see if your system supports struct cmsghdr...
Checking to see if your C compiler knows about "const"...
copysignl() found.
crypt() found.
<crypt.h> found.
crypt_r() found.
ctermid() found.
ctermid_r() NOT found.
ctime_r() found.
cuserid() found.
<limits.h> found.
<float.h> found.
DBL_DIG found.
dbmclose() found.
<dbm.h> found.
difftime() found.
<dirent.h> found.
Your directory entries are struct dirent.
Your directory entry does not know about the d_namlen field.
Checking to see if DIR has a dd_fd member variable
<sys/dir.h> found.
<sys/ndir.h> NOT found.
dirfd() found.
dlerror() found.
<dlfcn.h> found.
What is the extension of dynamically loaded modules [so]
Checking whether your dlsym() needs a leading underscore ...
dlsym doesn't need a leading underscore.
drand48_r() found.
dup2() found.
eaccess() found.
endgrent() found.
<grp.h> found.
endgrent_r() NOT found.
endhostent() found.
<netdb.h> found.
endhostent_r() NOT found.
endnetent() found.
endnetent_r() NOT found.
endprotoent() found.
endprotoent_r() NOT found.
endpwent() found.
<pwd.h> found.
endpwent_r() NOT found.
endservent() found.
endservent_r() NOT found.
<sys/file.h> defines the O_* constants...
and you have the 3 argument form of open().
<sys/file.h> found.
We'll be including <sys/file.h>.
<fcntl.h> found.
We don't need to include <fcntl.h> if we include <sys/file.h>.
fork() found.
pipe() found.
Figuring out the flag used by open() for non-blocking I/O...
Let's see what value errno gets from read() on a O_NONBLOCK file...
Checking how std your stdio is...
Checking to see what happens if we set the stdio ptr...
Increasing ptr in your stdio decreases cnt by the same amount. Good.
You seem to have 'fast stdio' to directly manipulate the stdio buffers.
fchdir() found.
fchmod() found.
fchown() found.
fcntl() found.
Well, your system knows about the normal fd_set typedef...
and you have the normal fd_set macros (just as I'd expect).
fgetpos() found.
finite() found.
finitel() found.
flock() found.
fp_class() NOT found.
pathconf() found.
fpathconf() found.
fpclass() NOT found.
fpclassify() NOT found.
fpclassl() NOT found.
Checking to see if you have fpos64_t...
frexpl() found.
<sys/param.h> found.
<sys/mount.h> found.
Checking to see if your system supports struct fs_data...
fseeko() found.
fsetpos() found.
fstatfs() found.
statvfs() found.
fstatvfs() found.
fsync() found.
ftello() found.
Checking if you have a working futimes()
Yes, you have
<ndbm.h> NOT found.
<gdbm/ndbm.h> NOT found.
<gdbm-ndbm.h> found.
dbm_open() found.
Checking if your <gdbm-ndbm.h> uses prototypes...
getaddrinfo() found.
getcwd() found.
getespwnam() NOT found.
getfsstat() NOT found.
getgrent() found.
getgrent_r() found.
getgrgid_r() found.
getgrnam_r() found.
gethostbyaddr() found.
gethostbyname() found.
gethostent() found.
gethostname() found.
uname() found.
Shall I ignore gethostname() from now on? [n]
gethostbyaddr_r() found.
gethostbyname_r() found.
gethostent_r() found.
getitimer() found.
getlogin() found.
getlogin_r() found.
getmnt() NOT found.
getmntent() found.
getnameinfo() found.
getnetbyaddr() found.
getnetbyname() found.
getnetent() found.
getnetbyaddr_r() found.
getnetbyname_r() found.
getnetent_r() found.
getpagesize() found.
getprotobyname() found.
getprotobynumber() found.
getprotoent() found.
getpgid() found.
getpgrp2() NOT found.
getppid() found.
getpriority() found.
getprotobyname_r() found.
getprotobynumber_r() found.
getprotoent_r() found.
getprpwnam() NOT found.
getpwent() found.
getpwent_r() found.
getpwnam_r() found.
getpwuid_r() found.
getservbyname() found.
getservbyport() found.
getservent() found.
getservbyname_r() found.
getservbyport_r() found.
getservent_r() found.
getspnam() found.
<shadow.h> found.
getspnam_r() found.
gettimeofday() found.
gmtime_r() found.
hasmntopt() found.
<netinet/in.h> found.
<arpa/inet.h> found.
htonl() found.
ilogbl() found.
strchr() found.
inet_aton() found.
inet_ntop() found.
inet_pton() found.
isascii() found.
isfinite() NOT found.
isinf() found.
isnan() found.
isnanl() found.
killpg() found.
lchown() found.
LDBL_DIG found.
<math.h> found.
Checking to see if your libm supports _LIB_VERSION...
Yes, it does (2)
link() found.
localtime_r() found.
localeconv() found.
lockf() found.
lstat() found.
madvise() found.
malloc_size() NOT found.
malloc_good_size() NOT found.
mblen() found.
mbstowcs() found.
mbtowc() found.
memchr() found.
memcmp() found.
memcpy() found.
memmove() found.
memset() found.
mkdir() found.
mkdtemp() found.
mkfifo() found.
mkstemp() found.
mkstemps() found.
mktime() found.
<sys/mman.h> found.
mmap() found.
and it returns (void *).
sqrtl() found.
scalbnl() found.
modfl() found.
Your modfl() seems okay for large values.
mprotect() found.
msgctl() found.
msgget() found.
msgsnd() found.
msgrcv() found.
You have the full msg*(2) library.
Checking to see if your system supports struct msghdr...
msync() found.
munmap() found.
nice() found.
<langinfo.h> found.
nl_langinfo() found.
Checking to see if your C compiler knows about "volatile"...
Choosing the C types to be used for Perl's internal types...
Checking how many bits of your UVs your NVs can preserve...
Checking to find the largest integer value your NVs can hold...
The largest integer your NVs can preserve is equal to 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0
Checking whether NV 0.0 is all bits zero in memory...
0.0 is represented as all bits zero in memory
Checking to see if you have off64_t...
Checking what constant to use for creating joinable pthreads...
You seem to use PTHREAD_CREATE_JOINABLE.
pause() found.
poll() found.
prctl() found.
readlink() found.
vfork() found.
Do you still want to use vfork()? [n]
pthread_atfork found.
pthread_attr_setscope() found.
sched_yield() found.
pthread_yield() found.
random_r() found.
readdir() found.
seekdir() found.
telldir() found.
rewinddir() found.
readdir64_r() found.
readdir_r() found.
readv() found.
recvmsg() found.
rename() found.
rmdir() found.
<memory.h> found.
Checking if your memcmp() can compare relative magnitude...
select() found.
semctl() found.
semget() found.
semop() found.
You have the full sem*(2) library.
You do not have union semun in <sys/sem.h>.
You can use union semun for semctl IPC_STAT.
You can also use struct semid_ds* for semctl IPC_STAT.
sendmsg() found.
setegid() found.
seteuid() found.
setgrent() found.
setgrent_r() NOT found.
sethostent() found.
sethostent_r() NOT found.
setitimer() found.
setlinebuf() found.
setlocale() found.
<locale.h> found.
setlocale_r() NOT found.
setnetent() found.
setnetent_r() NOT found.
setprotoent() found.
setpgid() found.
setpgrp2() NOT found.
setpriority() found.
setproctitle() NOT found.
setprotoent_r() NOT found.
setpwent() found.
setpwent_r() NOT found.
setregid() found.
setresgid() found.
setreuid() found.
setresuid() found.
setrgid() NOT found.
setruid() NOT found.
setservent() found.
setservent_r() NOT found.
setsid() found.
setvbuf() found.
<sfio.h> NOT found.
shmctl() found.
shmget() found.
shmat() found.
and it returns (void *).
shmdt() found.
You have the full shm*(2) library.
sigaction() found.
<sunmath.h> NOT found.
Checking to see if you have signbit() available to work on double... Yes.
sigprocmask() found.
POSIX sigsetjmp found.
snprintf() found.
vsnprintf() found.
sockatmark() found.
socks5_init() NOT found.
Checking whether sprintf returns the length of the string...
sprintf returns the length of the string (as ANSI says it should)
srand48_r() found.
srandom_r() found.
<sys/stat.h> found.
Checking to see if your struct stat has st_blocks field...
<sys/vfs.h> found.
<sys/statfs.h> found.
Checking to see if your system supports struct statfs...
Checking to see if your struct statfs has f_flags field...
Your compiler supports static __inline__.
Checking how to access stdio streams by file descriptor number...
I can't figure out how to access stdio streams by file descriptor number.
strcoll() found.
Checking to see if your C compiler can copy structs...
strerror() found.
strerror_r() found.
strftime() found.
strlcat() NOT found.
strlcpy() NOT found.
strtod() found.
strtol() found.
strtold() found.
strtoll() found.
strtoq() found.
strtoul() found.
strtoull() found.
strtouq() found.
strxfrm() found.
symlink() found.
syscall() found.
sysconf() found.
system() found.
tcgetpgrp() found.
tcsetpgrp() found.
time() found.
time_t found.
timegm() found.
<sys/times.h> found.
times() found.
clock_t found.
tmpnam_r() found.
truncate() found.
ttyname_r() found.
tzname[] found.
(Testing for character data alignment may crash the test. That's okay.)
It seems that you must access character data in an aligned manner.
ualarm() found.
Hmm. Based on the hints in hints/linux.sh,
the recommended value for $d_ualarm on this machine was "undef"!
Keep the recommended value? [y]
umask() found.
unordered() NOT found.
unsetenv() found.
usleep() found.
ustat() found.
closedir() found.
Checking whether closedir() returns a status...
wait4() found.
waitpid() found.
wcstombs() found.
wctomb() found.
writev() found.
Checking alignment constraints...
Doubles must be aligned on a how-many-byte boundary? [2]
Checking how long a character is (in bits)...
What is the length of a character (in bits)? [8]
Checking to see how your cpp does stuff like concatenate tokens...
Oh! Smells like ANSI's been here.
<db.h> found.
Checking Berkeley DB version ...
Looks OK.
Checking return type needed for hash for Berkeley DB ...
Checking return type needed for prefix for Berkeley DB ...
Looking for a random number function...
Good, found drand48().
Use which function to generate random numbers? [drand48]
Determining whether or not we are on an EBCDIC system...
Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8.
Checking how to flush all pending stdio output...
Your fflush(NULL) works okay for output streams.
Let's see if it clobbers input pipes...
fflush(NULL) seems to behave okay with input streams.
Checking the size of gid_t...
Checking the sign of gid_t...
Checking how to print 64-bit integers...
Checking the format strings to be used for Perl's internal types...
Checking the format string to be used for gids...
getgroups() found.
setgroups() found.
What type pointer is the second argument to getgroups() and setgroups()?
[gid_t]
Build Perl with MAD? [n]
Checking if your /usr/bin/make program sets $(MAKE)...
mode_t found.
It seems that you don't need va_copy().
size_t found.
What pager is used on your system? [/usr/bin/sensible-pager]
pid_t found.
Checking how to generate random libraries on your machine...
<values.h> found.
Sizeof time_t = 4
Your select() operates on 32 bits at a time.
Generating a list of signal names and numbers...
Checking the size of size_t...
Checking to see if you have socklen_t...
<socks.h> NOT found.
I'll be using ssize_t for functions returning a byte count.
Your stdio uses signed chars.
Checking the size of uid_t...
Checking the sign of uid_t...
Checking the format string to be used for uids...
It appears we'll be able to prototype varargs functions.
Which compiler compiler (yacc) shall I use? [yacc]
<assert.h> found.
<fp.h> NOT found.
<fp_class.h> NOT found.
<gdbm.h> found.
gdbm_open() found.
<ieeefp.h> NOT found.
<libutil.h> NOT found.
<mach/cthreads.h> NOT found.
<mntent.h> found.
<net/errno.h> NOT found.
<netinet/tcp.h> found.
<poll.h> found.
<prot.h> NOT found.
Guessing which symbols your C compiler and preprocessor define...
try.c: In function 'main':
try.c:5701:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5704:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5707:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5710:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5737:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5740:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5743:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5746:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5773:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5776:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5779:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5782:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5809:16: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5812:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5815:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5818:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5845:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5848:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5851:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5854:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6637:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6640:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6643:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6646:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6673:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6676:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6679:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6682:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6709:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6712:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6715:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6718:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6745:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6748:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6751:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6754:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6781:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6784:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6787:21: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6790:21: warning: extra tokens at end of #ifdef directive [enabled by default]
tcsetattr() found.
You have POSIX termios.h... good!
<stddef.h> found.
<sys/access.h> NOT found.
<sys/filio.h> NOT found.
<sys/ioctl.h> found.
<syslog.h> found.
<sys/mode.h> NOT found.
<sys/poll.h> found.
<sys/resource.h> found.
<sys/security.h> NOT found.
<sys/statvfs.h> found.
<sys/un.h> found.
<sys/utsname.h> found.
<sys/wait.h> found.
<ustat.h> found.
<utime.h> found.
Looking for extensions...
What extensions do you wish to load dynamically?
[B Compress/Raw/Bzip2 Compress/Raw/Zlib Cwd DB_File Data/Dumper Devel/DProf Devel/PPPort Devel/Peek Digest/MD5 Digest/SHA Encode Fcntl File/Glob Filter/Util/Call GDBM_File Hash/Util Hash/Util/FieldHash I18N/Langinfo IO IPC/SysV List/Util MIME/Base64 Math/BigInt/FastCalc NDBM_File ODBM_File Opcode POSIX PerlIO/encoding PerlIO/scalar PerlIO/via SDBM_File Socket Storable Sys/Hostname Sys/Syslog Text/Soundex Tie/Hash/NamedCapture Time/HiRes Time/Piece Unicode/Collate Unicode/Normalize XS/APItest XS/Typemap attributes mro re threads threads/shared]
What extensions do you wish to load statically? [none]
I see a config.over file. Do you wish to load it? [y]
Stripping down executable paths...
Creating config.sh...
Doing variable substitutions on .SH files...
Extracting config.h (with variable substitutions)
Extracting cflags (with variable substitutions)
Not re-extracting config.h
Extracting makedepend (with variable substitutions)
Extracting Makefile (with variable substitutions)
Extracting myconfig (with variable substitutions)
Extracting pod/Makefile (with variable substitutions)
Extracting Policy.sh (with variable substitutions)
Extracting runtests (with variable substitutions)
Extracting utils/Makefile (with variable substitutions)
Extracting x2p/cflags (with variable substitutions)
Extracting x2p/Makefile (with variable substitutions)
Run make depend now? [y]
make[1]: Entering directory `/tmp/buildd/perl-5.14.2'
sh ./makedepend MAKE=make
make[2]: Entering directory `/tmp/buildd/perl-5.14.2'
rm -f opmini.c
/bin/ln -s op.c opmini.c
rm -f perlmini.c
/bin/ln -s perl.c perlmini.c
echo av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c miniperlmain.c opmini.c perlmini.c | tr ' ' '\n' >.clist
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2'
Finding dependencies for av.o.
Finding dependencies for scope.o.
Finding dependencies for op.o.
Finding dependencies for doop.o.
Finding dependencies for doio.o.
Finding dependencies for dump.o.
Finding dependencies for gv.o.
Finding dependencies for hv.o.
Finding dependencies for mg.o.
Finding dependencies for reentr.o.
Finding dependencies for mro.o.
Finding dependencies for perl.o.
Finding dependencies for perly.o.
Finding dependencies for pp.o.
Finding dependencies for pp_hot.o.
Finding dependencies for pp_ctl.o.
Finding dependencies for pp_sys.o.
Finding dependencies for regcomp.o.
Finding dependencies for regexec.o.
Finding dependencies for utf8.o.
Finding dependencies for sv.o.
Finding dependencies for taint.o.
Finding dependencies for toke.o.
Finding dependencies for util.o.
Finding dependencies for deb.o.
Finding dependencies for run.o.
Finding dependencies for universal.o.
Finding dependencies for pad.o.
Finding dependencies for globals.o.
Finding dependencies for keywords.o.
Finding dependencies for perlio.o.
Finding dependencies for perlapi.o.
Finding dependencies for numeric.o.
Finding dependencies for mathoms.o.
Finding dependencies for locale.o.
Finding dependencies for pp_pack.o.
Finding dependencies for pp_sort.o.
Finding dependencies for miniperlmain.o.
Finding dependencies for opmini.o.
Finding dependencies for perlmini.o.
make[2]: Entering directory `/tmp/buildd/perl-5.14.2'
echo Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH pod/Makefile.SH | tr ' ' '\n' >.shlist
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2'
Updating makefile...
cd x2p; make depend
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
sh ../makedepend MAKE=make
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
echo hash.c str.c util.c walk.c | tr ' ' '\n' >.clist
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
Finding dependencies for hash.o.
Finding dependencies for str.o.
Finding dependencies for util.o.
Finding dependencies for walk.o.
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
Updating makefile...
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
make[1]: Leaving directory `/tmp/buildd/perl-5.14.2'
Now you must run 'make'.
If you compile perl5 on a different machine or from a different object
directory, copy the Policy.sh file from this object directory to the
new one before you run Configure -- this will help you with most of
the policy defaults.
/usr/bin/make perl
make[1]: Entering directory `/tmp/buildd/perl-5.14.2'
`sh cflags "optimize='-O2 -g'" miniperlmain.o` miniperlmain.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" gv.o` gv.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" toke.o` toke.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perly.o` perly.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pad.o` pad.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" regcomp.o` regcomp.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
regcomp.c: In function 'S_regpiece':
regcomp.c:7429:11: warning: variable 'parse_start' set but not used [-Wunused-but-set-variable]
regcomp.c: In function 'Perl_regdupe_internal':
regcomp.c:11661:14: warning: variable 'npar' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" dump.o` dump.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" util.o` util.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
util.c: In function 'Perl_safesyscalloc':
util.c:297:14: warning: variable 'total_size' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" mg.o` mg.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" reentr.o` reentr.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" mro.o` mro.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" keywords.o` keywords.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" hv.o` hv.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
hv.c: In function 'S_hv_delete_common':
hv.c:907:16: warning: variable 'first_entry' set but not used [-Wunused-but-set-variable]
hv.c: In function 'S_clear_placeholders':
hv.c:1619:7: warning: variable 'first' set but not used [-Wunused-but-set-variable]
hv.c: In function 'S_unshare_hek_or_pvn':
hv.c:2649:10: warning: variable 'first' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" av.o` av.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" run.o` run.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_hot.o` pp_hot.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" sv.o` sv.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp.o` pp.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" scope.o` scope.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_ctl.o` pp_ctl.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
pp_ctl.c: In function 'Perl_pp_goto':
pp_ctl.c:2702:7: warning: variable 'gimme' set but not used [-Wunused-but-set-variable]
pp_ctl.c:2701:8: warning: variable 'newsp' set but not used [-Wunused-but-set-variable]
pp_ctl.c: In function 'Perl_pp_leavewhen':
pp_ctl.c:4849:9: warning: variable 'gimme' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" pp_sys.o` pp_sys.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
pp_sys.c: In function 'Perl_pp_warn':
pp_sys.c:422:17: warning: variable 'pv' set but not used [-Wunused-but-set-variable]
pp_sys.c: In function 'Perl_pp_die':
pp_sys.c:462:17: warning: variable 'pv' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" doop.o` doop.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" doio.o` doio.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" regexec.o` regexec.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
regexec.c: In function 'S_find_byclass':
regexec.c:1529:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1535:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1540:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1550:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1560:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1565:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1576:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1583:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1595:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1602:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1621:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1628:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1646:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1653:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1672:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1690:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c: In function 'S_regmatch':
regexec.c:3679:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3770:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3770:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3770:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3770:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c: In function 'S_regrepeat':
regexec.c:6037:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:6082:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:6134:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:6183:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:6236:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:6269:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" utf8.o` utf8.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" taint.o` taint.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" deb.o` deb.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" universal.o` universal.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" generate_uudmap.o` generate_uudmap.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
cc -o generate_uudmap -fstack-protector -L/usr/local/lib generate_uudmap.o -ldl -lm -lpthread -lc -lcrypt
../generate_uudmap uudmap.h bitcount.h
`sh cflags "optimize='-O2 -g'" globals.o` globals.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perlio.o` perlio.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perlapi.o` perlapi.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" numeric.o` numeric.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" mathoms.o` mathoms.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" locale.o` locale.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_pack.o` pp_pack.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_sort.o` pp_sort.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" opmini.o` -DPERL_IS_MINIPERL -DPERL_EXTERNAL_GLOB opmini.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perlmini.o` -DPERL_IS_MINIPERL -DPERL_EXTERNAL_GLOB perlmini.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
cc -fstack-protector -L/usr/local/lib -o miniperl \
gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o keywords.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o \
miniperlmain.o opmini.o perlmini.o -ldl -lm -lpthread -lc -lcrypt
../miniperl -w -Ilib -MExporter -e '<?>' || /usr/bin/make minitest
../miniperl -Ilib make_patchnum.pl
Updating 'git_version.h' and 'lib/Config_git.pl'
../miniperl -Ilib configpm
written lib/Config.pod
updated lib/Config.pm
updated lib/Config_heavy.pl
../miniperl -Ilib minimod.pl > lib/ExtUtils/Miniperl.pm
../miniperl -Ilib -Ilib -MExtUtils::Miniperl -e 'writemain(@ARGV)' DynaLoader > perlmain.c
`sh cflags "optimize='-O2 -g'" perlmain.o` perlmain.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" op.o` op.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perl.o` perl.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
../miniperl -Ilib write_buildcustomize.pl >lib/buildcustomize.pl
../miniperl -Ilib make_ext.pl cpan/Archive-Extract/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Archive::Extract (all)
Creating Makefile.PL in cpan/Archive-Extract for Archive::Extract
Running Makefile.PL in cpan/Archive-Extract
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Archive::Extract
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
Making all in cpan/Archive-Extract
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
cp lib/Archive/Extract.pm ../../lib/Archive/Extract.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
../miniperl -Ilib make_ext.pl cpan/Archive-Tar/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Archive::Tar (all)
Creating Makefile.PL in cpan/Archive-Tar for Archive::Tar
Running Makefile.PL in cpan/Archive-Tar
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Archive::Tar
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
Making all in cpan/Archive-Tar
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
cp lib/Archive/Tar/Constant.pm ../../lib/Archive/Tar/Constant.pm
cp lib/Archive/Tar.pm ../../lib/Archive/Tar.pm
cp lib/Archive/Tar/File.pm ../../lib/Archive/Tar/File.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
../miniperl -Ilib make_ext.pl dist/Attribute-Handlers/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Attribute::Handlers (all)
Creating Makefile.PL in dist/Attribute-Handlers for Attribute::Handlers
Running Makefile.PL in dist/Attribute-Handlers
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Attribute::Handlers
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
Making all in dist/Attribute-Handlers
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
cp lib/Attribute/Handlers.pm ../../lib/Attribute/Handlers.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
../miniperl -Ilib make_ext.pl cpan/AutoLoader/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making AutoLoader (all)
Creating Makefile.PL in cpan/AutoLoader for AutoLoader
Running Makefile.PL in cpan/AutoLoader
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for AutoLoader
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
Making all in cpan/AutoLoader
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
cp lib/AutoLoader.pm ../../lib/AutoLoader.pm
cp lib/AutoSplit.pm ../../lib/AutoSplit.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
../miniperl -Ilib make_ext.pl cpan/B-Debug/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making B::Debug (all)
Creating Makefile.PL in cpan/B-Debug for B::Debug
Running Makefile.PL in cpan/B-Debug
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for B::Debug
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
Making all in cpan/B-Debug
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
cp Debug.pm ../../lib/B/Debug.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
../miniperl -Ilib make_ext.pl dist/B-Deparse/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making B::Deparse (all)
Creating Makefile.PL in dist/B-Deparse for B::Deparse
Running Makefile.PL in dist/B-Deparse
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for B::Deparse
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
Making all in dist/B-Deparse
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
cp Deparse.pm ../../lib/B/Deparse.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
../miniperl -Ilib make_ext.pl dist/B-Lint/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making B::Lint (all)
Creating Makefile.PL in dist/B-Lint for B::Lint
Running Makefile.PL in dist/B-Lint
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for B::Lint
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
Making all in dist/B-Lint
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
cp lib/B/Lint/Debug.pm ../../lib/B/Lint/Debug.pm
cp lib/B/Lint.pm ../../lib/B/Lint.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
../miniperl -Ilib make_ext.pl cpan/CGI/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CGI (all)
Creating Makefile.PL in cpan/CGI for CGI
Running Makefile.PL in cpan/CGI
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CGI
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
Making all in cpan/CGI
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
cp lib/CGI/Switch.pm ../../lib/CGI/Switch.pm
cp lib/CGI/Cookie.pm ../../lib/CGI/Cookie.pm
cp lib/CGI/Pretty.pm ../../lib/CGI/Pretty.pm
cp lib/CGI.pm ../../lib/CGI.pm
cp lib/CGI/Carp.pm ../../lib/CGI/Carp.pm
cp lib/CGI/Apache.pm ../../lib/CGI/Apache.pm
cp lib/CGI/Util.pm ../../lib/CGI/Util.pm
cp lib/CGI/Push.pm ../../lib/CGI/Push.pm
cp lib/CGI/Fast.pm ../../lib/CGI/Fast.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
../miniperl -Ilib make_ext.pl cpan/CPAN/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CPAN (all)
Creating Makefile.PL in cpan/CPAN for CPAN
Running Makefile.PL in cpan/CPAN
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CPAN
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
Making all in cpan/CPAN
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
cp lib/CPAN.pm ../../lib/CPAN.pm
cp lib/CPAN/CacheMgr.pm ../../lib/CPAN/CacheMgr.pm
cp lib/CPAN/FTP/netrc.pm ../../lib/CPAN/FTP/netrc.pm
cp lib/CPAN/LWP/UserAgent.pm ../../lib/CPAN/LWP/UserAgent.pm
cp lib/CPAN/FTP.pm ../../lib/CPAN/FTP.pm
cp lib/CPAN/Queue.pm ../../lib/CPAN/Queue.pm
cp lib/CPAN/Distroprefs.pm ../../lib/CPAN/Distroprefs.pm
cp lib/CPAN/Kwalify/distroprefs.yml ../../lib/CPAN/Kwalify/distroprefs.yml
cp lib/App/Cpan.pm ../../lib/App/Cpan.pm
cp lib/CPAN/Kwalify.pm ../../lib/CPAN/Kwalify.pm
cp lib/CPAN/Module.pm ../../lib/CPAN/Module.pm
cp lib/CPAN/Author.pm ../../lib/CPAN/Author.pm
cp lib/CPAN/Debug.pm ../../lib/CPAN/Debug.pm
cp lib/CPAN/HTTP/Credentials.pm ../../lib/CPAN/HTTP/Credentials.pm
cp lib/CPAN/API/HOWTO.pod ../../lib/CPAN/API/HOWTO.pod
cp lib/CPAN/HTTP/Client.pm ../../lib/CPAN/HTTP/Client.pm
cp lib/CPAN/Complete.pm ../../lib/CPAN/Complete.pm
cp lib/CPAN/FirstTime.pm ../../lib/CPAN/FirstTime.pm
cp lib/CPAN/Distrostatus.pm ../../lib/CPAN/Distrostatus.pm
cp lib/CPAN/Exception/blocked_urllist.pm ../../lib/CPAN/Exception/blocked_urllist.pm
cp lib/CPAN/Tarzip.pm ../../lib/CPAN/Tarzip.pm
cp lib/CPAN/Prompt.pm ../../lib/CPAN/Prompt.pm
cp lib/CPAN/URL.pm ../../lib/CPAN/URL.pm
cp lib/CPAN/Version.pm ../../lib/CPAN/Version.pm
cp lib/CPAN/DeferredCode.pm ../../lib/CPAN/DeferredCode.pm
cp lib/CPAN/Distribution.pm ../../lib/CPAN/Distribution.pm
cp lib/CPAN/Nox.pm ../../lib/CPAN/Nox.pm
cp lib/CPAN/Bundle.pm ../../lib/CPAN/Bundle.pm
cp lib/CPAN/Exception/RecursiveDependency.pm ../../lib/CPAN/Exception/RecursiveDependency.pm
cp lib/CPAN/Shell.pm ../../lib/CPAN/Shell.pm
cp lib/CPAN/HandleConfig.pm ../../lib/CPAN/HandleConfig.pm
cp lib/CPAN/InfoObj.pm ../../lib/CPAN/InfoObj.pm
cp lib/CPAN/Exception/yaml_not_installed.pm ../../lib/CPAN/Exception/yaml_not_installed.pm
cp lib/CPAN/Index.pm ../../lib/CPAN/Index.pm
cp lib/CPAN/Kwalify/distroprefs.dd ../../lib/CPAN/Kwalify/distroprefs.dd
cp lib/CPAN/Mirrors.pm ../../lib/CPAN/Mirrors.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
../miniperl -Ilib make_ext.pl cpan/CPAN-Meta/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CPAN::Meta (all)
Creating Makefile.PL in cpan/CPAN-Meta for CPAN::Meta
Running Makefile.PL in cpan/CPAN-Meta
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CPAN::Meta
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
Making all in cpan/CPAN-Meta
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
cp lib/CPAN/Meta.pm ../../lib/CPAN/Meta.pm
cp lib/CPAN/Meta/Prereqs.pm ../../lib/CPAN/Meta/Prereqs.pm
cp lib/CPAN/Meta/History.pm ../../lib/CPAN/Meta/History.pm
cp lib/CPAN/Meta/Validator.pm ../../lib/CPAN/Meta/Validator.pm
cp lib/CPAN/Meta/Converter.pm ../../lib/CPAN/Meta/Converter.pm
cp lib/CPAN/Meta/Feature.pm ../../lib/CPAN/Meta/Feature.pm
cp lib/CPAN/Meta/Spec.pm ../../lib/CPAN/Meta/Spec.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
../miniperl -Ilib make_ext.pl cpan/CPAN-Meta-YAML/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CPAN::Meta::YAML (all)
Creating Makefile.PL in cpan/CPAN-Meta-YAML for CPAN::Meta::YAML
Running Makefile.PL in cpan/CPAN-Meta-YAML
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CPAN::Meta::YAML
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
Making all in cpan/CPAN-Meta-YAML
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
cp lib/CPAN/Meta/YAML.pm ../../lib/CPAN/Meta/YAML.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
../miniperl -Ilib make_ext.pl cpan/CPANPLUS/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CPANPLUS (all)
Running Makefile.PL in cpan/CPANPLUS
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CPANPLUS
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
Making all in cpan/CPANPLUS
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
cp lib/CPANPLUS/Backend/RV.pm ../../lib/CPANPLUS/Backend/RV.pm
cp lib/CPANPLUS/Shell/Default.pm ../../lib/CPANPLUS/Shell/Default.pm
cp lib/CPANPLUS/Module.pm ../../lib/CPANPLUS/Module.pm
cp lib/CPANPLUS/Module/Author.pm ../../lib/CPANPLUS/Module/Author.pm
cp lib/CPANPLUS/Module/Checksums.pm ../../lib/CPANPLUS/Module/Checksums.pm
cp lib/CPANPLUS/Dist/MM.pm ../../lib/CPANPLUS/Dist/MM.pm
cp lib/CPANPLUS/Internals.pm ../../lib/CPANPLUS/Internals.pm
cp lib/CPANPLUS/Module/Signature.pm ../../lib/CPANPLUS/Module/Signature.pm
cp lib/CPANPLUS/Hacking.pod ../../lib/CPANPLUS/Hacking.pod
cp lib/CPANPLUS.pm ../../lib/CPANPLUS.pm
cp lib/CPANPLUS/Shell/Default/Plugins/Remote.pm ../../lib/CPANPLUS/Shell/Default/Plugins/Remote.pm
cp lib/CPANPLUS/Config/System.pm ../../lib/CPANPLUS/Config/System.pm
cp lib/CPANPLUS/Backend.pm ../../lib/CPANPLUS/Backend.pm
cp lib/CPANPLUS/Internals/Report.pm ../../lib/CPANPLUS/Internals/Report.pm
cp lib/CPANPLUS/Module/Author/Fake.pm ../../lib/CPANPLUS/Module/Author/Fake.pm
cp lib/CPANPLUS/FAQ.pod ../../lib/CPANPLUS/FAQ.pod
cp lib/CPANPLUS/Config.pm ../../lib/CPANPLUS/Config.pm
cp lib/CPANPLUS/Internals/Utils.pm ../../lib/CPANPLUS/Internals/Utils.pm
cp lib/CPANPLUS/Shell/Default/Plugins/Source.pm ../../lib/CPANPLUS/Shell/Default/Plugins/Source.pm
cp lib/CPANPLUS/Internals/Constants/Report.pm ../../lib/CPANPLUS/Internals/Constants/Report.pm
cp lib/CPANPLUS/Configure/Setup.pm ../../lib/CPANPLUS/Configure/Setup.pm
cp lib/CPANPLUS/Shell.pm ../../lib/CPANPLUS/Shell.pm
cp lib/CPANPLUS/Internals/Source.pm ../../lib/CPANPLUS/Internals/Source.pm
cp lib/CPANPLUS/Internals/Fetch.pm ../../lib/CPANPLUS/Internals/Fetch.pm
cp lib/CPANPLUS/Shell/Classic.pm ../../lib/CPANPLUS/Shell/Classic.pm
cp lib/CPANPLUS/Dist.pm ../../lib/CPANPLUS/Dist.pm
cp lib/CPANPLUS/Configure.pm ../../lib/CPANPLUS/Configure.pm
cp lib/CPANPLUS/Selfupdate.pm ../../lib/CPANPLUS/Selfupdate.pm
cp lib/CPANPLUS/Internals/Search.pm ../../lib/CPANPLUS/Internals/Search.pm
cp lib/CPANPLUS/Internals/Extract.pm ../../lib/CPANPLUS/Internals/Extract.pm
cp lib/CPANPLUS/Internals/Source/SQLite/Tie.pm ../../lib/CPANPLUS/Internals/Source/SQLite/Tie.pm
cp lib/CPANPLUS/Dist/Sample.pm ../../lib/CPANPLUS/Dist/Sample.pm
cp lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm ../../lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm
cp lib/CPANPLUS/Internals/Utils/Autoflush.pm ../../lib/CPANPLUS/Internals/Utils/Autoflush.pm
cp lib/CPANPLUS/Module/Fake.pm ../../lib/CPANPLUS/Module/Fake.pm
cp lib/CPANPLUS/Error.pm ../../lib/CPANPLUS/Error.pm
cp lib/CPANPLUS/Internals/Source/SQLite.pm ../../lib/CPANPLUS/Internals/Source/SQLite.pm
cp lib/CPANPLUS/Internals/Source/Memory.pm ../../lib/CPANPLUS/Internals/Source/Memory.pm
cp lib/CPANPLUS/Dist/Autobundle.pm ../../lib/CPANPLUS/Dist/Autobundle.pm
cp lib/CPANPLUS/Dist/Base.pm ../../lib/CPANPLUS/Dist/Base.pm
cp lib/CPANPLUS/Internals/Constants.pm ../../lib/CPANPLUS/Internals/Constants.pm
cp lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod ../../lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod
cp bin/cpanp-run-perl blib/script/cpanp-run-perl
/tmp/buildd/perl-5.14.2/cpan/CPANPLUS/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpanp-run-perl
cp bin/cpan2dist blib/script/cpan2dist
/tmp/buildd/perl-5.14.2/cpan/CPANPLUS/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan2dist
cp bin/cpanp blib/script/cpanp
/tmp/buildd/perl-5.14.2/cpan/CPANPLUS/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpanp
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
../miniperl -Ilib make_ext.pl cpan/CPANPLUS-Dist-Build/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CPANPLUS::Dist::Build (all)
Creating Makefile.PL in cpan/CPANPLUS-Dist-Build for CPANPLUS::Dist::Build
Running Makefile.PL in cpan/CPANPLUS-Dist-Build
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CPANPLUS::Dist::Build
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
Making all in cpan/CPANPLUS-Dist-Build
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
cp lib/CPANPLUS/Dist/Build.pm ../../lib/CPANPLUS/Dist/Build.pm
cp lib/CPANPLUS/Dist/Build/Constants.pm ../../lib/CPANPLUS/Dist/Build/Constants.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
../miniperl -Ilib make_ext.pl dist/Devel-SelfStubber/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Devel::SelfStubber (all)
Creating Makefile.PL in dist/Devel-SelfStubber for Devel::SelfStubber
Running Makefile.PL in dist/Devel-SelfStubber
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Devel::SelfStubber
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
Making all in dist/Devel-SelfStubber
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
cp lib/Devel/SelfStubber.pm ../../lib/Devel/SelfStubber.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
../miniperl -Ilib make_ext.pl cpan/Digest/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Digest (all)
Creating Makefile.PL in cpan/Digest for Digest
Running Makefile.PL in cpan/Digest
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Digest
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
Making all in cpan/Digest
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
cp Digest.pm ../../lib/Digest.pm
cp Digest/file.pm ../../lib/Digest/file.pm
cp Digest/base.pm ../../lib/Digest/base.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
../miniperl -Ilib make_ext.pl dist/Dumpvalue/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Dumpvalue (all)
Creating Makefile.PL in dist/Dumpvalue for Dumpvalue
Running Makefile.PL in dist/Dumpvalue
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Dumpvalue
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
Making all in dist/Dumpvalue
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
cp lib/Dumpvalue.pm ../../lib/Dumpvalue.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
../miniperl -Ilib make_ext.pl dist/Env/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Env (all)
Creating Makefile.PL in dist/Env for Env
Running Makefile.PL in dist/Env
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Env
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Env'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Env'
Making all in dist/Env
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Env'
cp lib/Env.pm ../../lib/Env.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Env'
../miniperl -Ilib make_ext.pl ext/Errno/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Errno (all)
Running Makefile.PL in ext/Errno
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Errno
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Errno'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Errno'
Making all in ext/Errno
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Errno'
.../../miniperl "-I../../lib" "-I../../lib" Errno_pm.PL Errno.pm
cp Errno.pm ../../lib/Errno.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Errno'
../miniperl -Ilib make_ext.pl dist/ExtUtils-CBuilder/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::CBuilder (all)
Creating Makefile.PL in dist/ExtUtils-CBuilder for ExtUtils::CBuilder
Running Makefile.PL in dist/ExtUtils-CBuilder
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::CBuilder
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
Making all in dist/ExtUtils-CBuilder
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
cp lib/ExtUtils/CBuilder.pm ../../lib/ExtUtils/CBuilder.pm
cp lib/ExtUtils/CBuilder/Platform/Windows.pm ../../lib/ExtUtils/CBuilder/Platform/Windows.pm
cp lib/ExtUtils/CBuilder/Platform/aix.pm ../../lib/ExtUtils/CBuilder/Platform/aix.pm
cp lib/ExtUtils/CBuilder/Platform/cygwin.pm ../../lib/ExtUtils/CBuilder/Platform/cygwin.pm
cp lib/ExtUtils/CBuilder/Platform/Windows/GCC.pm ../../lib/ExtUtils/CBuilder/Platform/Windows/GCC.pm
cp lib/ExtUtils/CBuilder/Platform/VMS.pm ../../lib/ExtUtils/CBuilder/Platform/VMS.pm
cp lib/ExtUtils/CBuilder/Platform/Unix.pm ../../lib/ExtUtils/CBuilder/Platform/Unix.pm
cp lib/ExtUtils/CBuilder/Platform/Windows/BCC.pm ../../lib/ExtUtils/CBuilder/Platform/Windows/BCC.pm
cp lib/ExtUtils/CBuilder/Platform/Windows/MSVC.pm ../../lib/ExtUtils/CBuilder/Platform/Windows/MSVC.pm
cp lib/ExtUtils/CBuilder/Platform/darwin.pm ../../lib/ExtUtils/CBuilder/Platform/darwin.pm
cp lib/ExtUtils/CBuilder/Platform/dec_osf.pm ../../lib/ExtUtils/CBuilder/Platform/dec_osf.pm
cp lib/ExtUtils/CBuilder/Platform/os2.pm ../../lib/ExtUtils/CBuilder/Platform/os2.pm
cp lib/ExtUtils/CBuilder/Base.pm ../../lib/ExtUtils/CBuilder/Base.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
../miniperl -Ilib make_ext.pl dist/ExtUtils-Command/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::Command (all)
Creating Makefile.PL in dist/ExtUtils-Command for ExtUtils::Command
Running Makefile.PL in dist/ExtUtils-Command
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::Command
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
Making all in dist/ExtUtils-Command
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
cp lib/ExtUtils/Command.pm ../../lib/ExtUtils/Command.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
../miniperl -Ilib make_ext.pl cpan/ExtUtils-Constant/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::Constant (all)
Creating Makefile.PL in cpan/ExtUtils-Constant for ExtUtils::Constant
Running Makefile.PL in cpan/ExtUtils-Constant
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::Constant
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
Making all in cpan/ExtUtils-Constant
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
cp lib/ExtUtils/Constant/ProxySubs.pm ../../lib/ExtUtils/Constant/ProxySubs.pm
cp lib/ExtUtils/Constant/XS.pm ../../lib/ExtUtils/Constant/XS.pm
cp lib/ExtUtils/Constant/Utils.pm ../../lib/ExtUtils/Constant/Utils.pm
cp lib/ExtUtils/Constant/Base.pm ../../lib/ExtUtils/Constant/Base.pm
cp lib/ExtUtils/Constant.pm ../../lib/ExtUtils/Constant.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
../miniperl -Ilib make_ext.pl dist/ExtUtils-Install/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::Install (all)
Creating Makefile.PL in dist/ExtUtils-Install for ExtUtils::Install
Running Makefile.PL in dist/ExtUtils-Install
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::Install
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
Making all in dist/ExtUtils-Install
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
cp lib/ExtUtils/Installed.pm ../../lib/ExtUtils/Installed.pm
cp lib/ExtUtils/Install.pm ../../lib/ExtUtils/Install.pm
cp lib/ExtUtils/Packlist.pm ../../lib/ExtUtils/Packlist.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
../miniperl -Ilib make_ext.pl cpan/ExtUtils-MakeMaker/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::MakeMaker (all)
Creating Makefile.PL in cpan/ExtUtils-MakeMaker for ExtUtils::MakeMaker
Running Makefile.PL in cpan/ExtUtils-MakeMaker
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::MakeMaker
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
Making all in cpan/ExtUtils-MakeMaker
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
cp lib/ExtUtils/MM_OS2.pm ../../lib/ExtUtils/MM_OS2.pm
cp lib/ExtUtils/MakeMaker.pm ../../lib/ExtUtils/MakeMaker.pm
cp lib/ExtUtils/MM_VOS.pm ../../lib/ExtUtils/MM_VOS.pm
cp lib/ExtUtils/MM_Unix.pm ../../lib/ExtUtils/MM_Unix.pm
cp lib/ExtUtils/Mksymlists.pm ../../lib/ExtUtils/Mksymlists.pm
cp lib/ExtUtils/MM.pm ../../lib/ExtUtils/MM.pm
cp lib/ExtUtils/MM_Win32.pm ../../lib/ExtUtils/MM_Win32.pm
cp lib/ExtUtils/MM_UWIN.pm ../../lib/ExtUtils/MM_UWIN.pm
cp lib/ExtUtils/testlib.pm ../../lib/ExtUtils/testlib.pm
cp lib/ExtUtils/MM_DOS.pm ../../lib/ExtUtils/MM_DOS.pm
cp lib/ExtUtils/MM_Cygwin.pm ../../lib/ExtUtils/MM_Cygwin.pm
cp lib/ExtUtils/MY.pm ../../lib/ExtUtils/MY.pm
cp lib/ExtUtils/MM_MacOS.pm ../../lib/ExtUtils/MM_MacOS.pm
cp lib/ExtUtils/MM_Win95.pm ../../lib/ExtUtils/MM_Win95.pm
cp lib/ExtUtils/MM_VMS.pm ../../lib/ExtUtils/MM_VMS.pm
cp lib/ExtUtils/MM_BeOS.pm ../../lib/ExtUtils/MM_BeOS.pm
cp lib/ExtUtils/Liblist.pm ../../lib/ExtUtils/Liblist.pm
cp lib/ExtUtils/MM_AIX.pm ../../lib/ExtUtils/MM_AIX.pm
cp lib/ExtUtils/MM_Darwin.pm ../../lib/ExtUtils/MM_Darwin.pm
cp lib/ExtUtils/MakeMaker/Tutorial.pod ../../lib/ExtUtils/MakeMaker/Tutorial.pod
cp lib/ExtUtils/Mkbootstrap.pm ../../lib/ExtUtils/Mkbootstrap.pm
cp lib/ExtUtils/Liblist/Kid.pm ../../lib/ExtUtils/Liblist/Kid.pm
cp lib/ExtUtils/MakeMaker/YAML.pm ../../lib/ExtUtils/MakeMaker/YAML.pm
cp lib/ExtUtils/MM_QNX.pm ../../lib/ExtUtils/MM_QNX.pm
cp lib/ExtUtils/MakeMaker/FAQ.pod ../../lib/ExtUtils/MakeMaker/FAQ.pod
cp lib/ExtUtils/Command/MM.pm ../../lib/ExtUtils/Command/MM.pm
cp lib/ExtUtils/MakeMaker/Config.pm ../../lib/ExtUtils/MakeMaker/Config.pm
cp lib/ExtUtils/MM_NW5.pm ../../lib/ExtUtils/MM_NW5.pm
cp lib/ExtUtils/MM_Any.pm ../../lib/ExtUtils/MM_Any.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
../miniperl -Ilib make_ext.pl dist/ExtUtils-Manifest/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::Manifest (all)
Creating Makefile.PL in dist/ExtUtils-Manifest for ExtUtils::Manifest
Running Makefile.PL in dist/ExtUtils-Manifest
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::Manifest
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
Making all in dist/ExtUtils-Manifest
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
cp lib/ExtUtils/MANIFEST.SKIP ../../lib/ExtUtils/MANIFEST.SKIP
cp lib/ExtUtils/Manifest.pm ../../lib/ExtUtils/Manifest.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
../miniperl -Ilib make_ext.pl dist/ExtUtils-ParseXS/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::ParseXS (all)
Creating Makefile.PL in dist/ExtUtils-ParseXS for ExtUtils::ParseXS
Running Makefile.PL in dist/ExtUtils-ParseXS
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::ParseXS
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
Making all in dist/ExtUtils-ParseXS
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
cp lib/ExtUtils/ParseXS.pm ../../lib/ExtUtils/ParseXS.pm
cp lib/ExtUtils/xsubpp ../../lib/ExtUtils/xsubpp
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
../miniperl -Ilib make_ext.pl dist/File-CheckTree/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making File::CheckTree (all)
Creating Makefile.PL in dist/File-CheckTree for File::CheckTree
Running Makefile.PL in dist/File-CheckTree
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for File::CheckTree
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
Making all in dist/File-CheckTree
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
cp lib/File/CheckTree.pm ../../lib/File/CheckTree.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
../miniperl -Ilib make_ext.pl cpan/File-Fetch/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making File::Fetch (all)
Creating Makefile.PL in cpan/File-Fetch for File::Fetch
Running Makefile.PL in cpan/File-Fetch
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for File::Fetch
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
Making all in cpan/File-Fetch
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
cp lib/File/Fetch.pm ../../lib/File/Fetch.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
../miniperl -Ilib make_ext.pl cpan/File-Path/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making File::Path (all)
Creating Makefile.PL in cpan/File-Path for File::Path
Running Makefile.PL in cpan/File-Path
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for File::Path
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
Making all in cpan/File-Path
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
cp lib/File/Path.pm ../../lib/File/Path.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
../miniperl -Ilib make_ext.pl cpan/File-Temp/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making File::Temp (all)
Creating Makefile.PL in cpan/File-Temp for File::Temp
Running Makefile.PL in cpan/File-Temp
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for File::Temp
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
Making all in cpan/File-Temp
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
cp Temp.pm ../../lib/File/Temp.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
../miniperl -Ilib make_ext.pl ext/FileCache/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making FileCache (all)
Creating Makefile.PL in ext/FileCache for FileCache
Running Makefile.PL in ext/FileCache
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for FileCache
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
Making all in ext/FileCache
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
cp lib/FileCache.pm ../../lib/FileCache.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
../miniperl -Ilib make_ext.pl dist/Filter-Simple/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Filter::Simple (all)
Creating Makefile.PL in dist/Filter-Simple for Filter::Simple
Running Makefile.PL in dist/Filter-Simple
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Filter::Simple
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
Making all in dist/Filter-Simple
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
cp lib/Filter/Simple.pm ../../lib/Filter/Simple.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
../miniperl -Ilib make_ext.pl cpan/Getopt-Long/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Getopt::Long (all)
Creating Makefile.PL in cpan/Getopt-Long for Getopt::Long
Running Makefile.PL in cpan/Getopt-Long
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Getopt::Long
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
Making all in cpan/Getopt-Long
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
cp lib/Getopt/Long.pm ../../lib/Getopt/Long.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
../miniperl -Ilib make_ext.pl cpan/HTTP-Tiny/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making HTTP::Tiny (all)
Creating Makefile.PL in cpan/HTTP-Tiny for HTTP::Tiny
Running Makefile.PL in cpan/HTTP-Tiny
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for HTTP::Tiny
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
Making all in cpan/HTTP-Tiny
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
cp lib/HTTP/Tiny.pm ../../lib/HTTP/Tiny.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
../miniperl -Ilib make_ext.pl dist/I18N-Collate/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making I18N::Collate (all)
Creating Makefile.PL in dist/I18N-Collate for I18N::Collate
Running Makefile.PL in dist/I18N-Collate
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for I18N::Collate
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
Making all in dist/I18N-Collate
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
cp lib/I18N/Collate.pm ../../lib/I18N/Collate.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
../miniperl -Ilib make_ext.pl dist/I18N-LangTags/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making I18N::LangTags (all)
Creating Makefile.PL in dist/I18N-LangTags for I18N::LangTags
Running Makefile.PL in dist/I18N-LangTags
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for I18N::LangTags
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
Making all in dist/I18N-LangTags
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
cp lib/I18N/LangTags/List.pm ../../lib/I18N/LangTags/List.pm
cp lib/I18N/LangTags.pm ../../lib/I18N/LangTags.pm
cp lib/I18N/LangTags/Detect.pm ../../lib/I18N/LangTags/Detect.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
../miniperl -Ilib make_ext.pl cpan/IO-Compress/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making IO::Compress (all)
Running Makefile.PL in cpan/IO-Compress
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for IO::Compress
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
Making all in cpan/IO-Compress
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
cp lib/IO/Uncompress/Adapter/Bunzip2.pm ../../lib/IO/Uncompress/Adapter/Bunzip2.pm
cp lib/IO/Uncompress/RawInflate.pm ../../lib/IO/Uncompress/RawInflate.pm
cp lib/Compress/Zlib.pm ../../lib/Compress/Zlib.pm
cp lib/IO/Uncompress/Inflate.pm ../../lib/IO/Uncompress/Inflate.pm
cp lib/IO/Compress/Deflate.pm ../../lib/IO/Compress/Deflate.pm
cp lib/IO/Compress/Adapter/Deflate.pm ../../lib/IO/Compress/Adapter/Deflate.pm
cp lib/IO/Compress/Zip.pm ../../lib/IO/Compress/Zip.pm
cp lib/IO/Uncompress/Adapter/Identity.pm ../../lib/IO/Uncompress/Adapter/Identity.pm
cp lib/IO/Uncompress/Base.pm ../../lib/IO/Uncompress/Base.pm
cp lib/IO/Compress/Gzip/Constants.pm ../../lib/IO/Compress/Gzip/Constants.pm
cp lib/IO/Compress/Zlib/Extra.pm ../../lib/IO/Compress/Zlib/Extra.pm
cp lib/IO/Compress/Base.pm ../../lib/IO/Compress/Base.pm
cp lib/File/GlobMapper.pm ../../lib/File/GlobMapper.pm
cp lib/IO/Compress/Zip/Constants.pm ../../lib/IO/Compress/Zip/Constants.pm
cp lib/IO/Compress/Zlib/Constants.pm ../../lib/IO/Compress/Zlib/Constants.pm
cp lib/IO/Compress/Adapter/Identity.pm ../../lib/IO/Compress/Adapter/Identity.pm
cp lib/IO/Uncompress/Unzip.pm ../../lib/IO/Uncompress/Unzip.pm
cp lib/IO/Uncompress/Adapter/Inflate.pm ../../lib/IO/Uncompress/Adapter/Inflate.pm
cp lib/IO/Compress/Base/Common.pm ../../lib/IO/Compress/Base/Common.pm
cp lib/IO/Uncompress/Bunzip2.pm ../../lib/IO/Uncompress/Bunzip2.pm
cp lib/IO/Uncompress/Gunzip.pm ../../lib/IO/Uncompress/Gunzip.pm
cp lib/IO/Compress/Adapter/Bzip2.pm ../../lib/IO/Compress/Adapter/Bzip2.pm
cp lib/IO/Uncompress/AnyUncompress.pm ../../lib/IO/Uncompress/AnyUncompress.pm
cp lib/IO/Compress/RawDeflate.pm ../../lib/IO/Compress/RawDeflate.pm
cp lib/IO/Uncompress/AnyInflate.pm ../../lib/IO/Uncompress/AnyInflate.pm
cp lib/IO/Compress/Gzip.pm ../../lib/IO/Compress/Gzip.pm
cp lib/IO/Compress/Bzip2.pm ../../lib/IO/Compress/Bzip2.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
../miniperl -Ilib make_ext.pl cpan/IO-Zlib/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making IO::Zlib (all)
Creating Makefile.PL in cpan/IO-Zlib for IO::Zlib
Running Makefile.PL in cpan/IO-Zlib
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for IO::Zlib
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
Making all in cpan/IO-Zlib
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
cp Zlib.pm ../../lib/IO/Zlib.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
../miniperl -Ilib make_ext.pl cpan/IPC-Cmd/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making IPC::Cmd (all)
Creating Makefile.PL in cpan/IPC-Cmd for IPC::Cmd
Running Makefile.PL in cpan/IPC-Cmd
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for IPC::Cmd
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
Making all in cpan/IPC-Cmd
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
cp lib/IPC/Cmd.pm ../../lib/IPC/Cmd.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
../miniperl -Ilib make_ext.pl ext/IPC-Open2/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making IPC::Open2 (all)
Creating Makefile.PL in ext/IPC-Open2 for IPC::Open2
Running Makefile.PL in ext/IPC-Open2
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for IPC::Open2
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
Making all in ext/IPC-Open2
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
cp lib/IPC/Open2.pm ../../lib/IPC/Open2.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
../miniperl -Ilib make_ext.pl ext/IPC-Open3/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making IPC::Open3 (all)
Creating Makefile.PL in ext/IPC-Open3 for IPC::Open3
Running Makefile.PL in ext/IPC-Open3
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for IPC::Open3
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
Making all in ext/IPC-Open3
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
cp lib/IPC/Open3.pm ../../lib/IPC/Open3.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
../miniperl -Ilib make_ext.pl cpan/JSON-PP/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making JSON::PP (all)
Creating Makefile.PL in cpan/JSON-PP for JSON::PP
Running Makefile.PL in cpan/JSON-PP
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for JSON::PP
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
Making all in cpan/JSON-PP
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
cp lib/JSON/PP.pm ../../lib/JSON/PP.pm
cp lib/JSON/PP/Boolean.pm ../../lib/JSON/PP/Boolean.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
../miniperl -Ilib make_ext.pl cpan/Locale-Codes/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Locale::Codes (all)
Creating Makefile.PL in cpan/Locale-Codes for Locale::Codes
Running Makefile.PL in cpan/Locale-Codes
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Locale::Codes
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
Making all in cpan/Locale-Codes
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
cp lib/Locale/Country.pm ../../lib/Locale/Country.pm
cp lib/Locale/Codes/Country.pm ../../lib/Locale/Codes/Country.pm
cp lib/Locale/Constants.pod ../../lib/Locale/Constants.pod
cp lib/Locale/Codes/Script.pm ../../lib/Locale/Codes/Script.pm
cp lib/Locale/Currency.pod ../../lib/Locale/Currency.pod
cp lib/Locale/Codes.pod ../../lib/Locale/Codes.pod
cp lib/Locale/Codes/Language.pm ../../lib/Locale/Codes/Language.pm
cp lib/Locale/Currency.pm ../../lib/Locale/Currency.pm
cp lib/Locale/Script.pod ../../lib/Locale/Script.pod
cp lib/Locale/Codes/Changes.pod ../../lib/Locale/Codes/Changes.pod
cp lib/Locale/Language.pm ../../lib/Locale/Language.pm
cp lib/Locale/Codes/Currency.pm ../../lib/Locale/Codes/Currency.pm
cp lib/Locale/Constants.pm ../../lib/Locale/Constants.pm
cp lib/Locale/Script.pm ../../lib/Locale/Script.pm
cp lib/Locale/Country.pod ../../lib/Locale/Country.pod
cp lib/Locale/Language.pod ../../lib/Locale/Language.pod
cp lib/Locale/Codes.pm ../../lib/Locale/Codes.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
../miniperl -Ilib make_ext.pl dist/Locale-Maketext/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Locale::Maketext (all)
Creating Makefile.PL in dist/Locale-Maketext for Locale::Maketext
Running Makefile.PL in dist/Locale-Maketext
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Locale::Maketext
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
Making all in dist/Locale-Maketext
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
cp lib/Locale/Maketext/GutsLoader.pm ../../lib/Locale/Maketext/GutsLoader.pm
cp lib/Locale/Maketext/Guts.pm ../../lib/Locale/Maketext/Guts.pm
cp lib/Locale/Maketext/TPJ13.pod ../../lib/Locale/Maketext/TPJ13.pod
cp lib/Locale/Maketext/Cookbook.pod ../../lib/Locale/Maketext/Cookbook.pod
cp lib/Locale/Maketext.pod ../../lib/Locale/Maketext.pod
cp lib/Locale/Maketext.pm ../../lib/Locale/Maketext.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
../miniperl -Ilib make_ext.pl cpan/Locale-Maketext-Simple/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Locale::Maketext::Simple (all)
Creating Makefile.PL in cpan/Locale-Maketext-Simple for Locale::Maketext::Simple
Running Makefile.PL in cpan/Locale-Maketext-Simple
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Locale::Maketext::Simple
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
Making all in cpan/Locale-Maketext-Simple
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
cp lib/Locale/Maketext/Simple.pm ../../lib/Locale/Maketext/Simple.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
../miniperl -Ilib make_ext.pl cpan/Log-Message/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Log::Message (all)
Creating Makefile.PL in cpan/Log-Message for Log::Message
Running Makefile.PL in cpan/Log-Message
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Log::Message
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
Making all in cpan/Log-Message
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
cp lib/Log/Message/Config.pm ../../lib/Log/Message/Config.pm
cp lib/Log/Message/Handlers.pm ../../lib/Log/Message/Handlers.pm
cp lib/Log/Message.pm ../../lib/Log/Message.pm
cp lib/Log/Message/Item.pm ../../lib/Log/Message/Item.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
../miniperl -Ilib make_ext.pl cpan/Log-Message-Simple/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Log::Message::Simple (all)
Creating Makefile.PL in cpan/Log-Message-Simple for Log::Message::Simple
Running Makefile.PL in cpan/Log-Message-Simple
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Log::Message::Simple
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
Making all in cpan/Log-Message-Simple
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
cp lib/Log/Message/Simple.pm ../../lib/Log/Message/Simple.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
../miniperl -Ilib make_ext.pl dist/Math-BigInt/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Math::BigInt (all)
Creating Makefile.PL in dist/Math-BigInt for Math::BigInt
Running Makefile.PL in dist/Math-BigInt
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Math::BigInt
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
Making all in dist/Math-BigInt
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
cp lib/Math/BigInt.pm ../../lib/Math/BigInt.pm
cp lib/Math/BigInt/CalcEmu.pm ../../lib/Math/BigInt/CalcEmu.pm
cp lib/Math/BigFloat.pm ../../lib/Math/BigFloat.pm
cp lib/Math/BigInt/Calc.pm ../../lib/Math/BigInt/Calc.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
../miniperl -Ilib make_ext.pl dist/Math-BigRat/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Math::BigRat (all)
Creating Makefile.PL in dist/Math-BigRat for Math::BigRat
Running Makefile.PL in dist/Math-BigRat
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Math::BigRat
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
Making all in dist/Math-BigRat
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
cp lib/Math/BigRat.pm ../../lib/Math/BigRat.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
../miniperl -Ilib make_ext.pl cpan/Math-Complex/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Math::Complex (all)
Creating Makefile.PL in cpan/Math-Complex for Math::Complex
Running Makefile.PL in cpan/Math-Complex
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Math::Complex
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
Making all in cpan/Math-Complex
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
cp lib/Math/Complex.pm ../../lib/Math/Complex.pm
cp lib/Math/Trig.pm ../../lib/Math/Trig.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
../miniperl -Ilib make_ext.pl cpan/Memoize/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Memoize (all)
Creating Makefile.PL in cpan/Memoize for Memoize
Running Makefile.PL in cpan/Memoize
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Memoize
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
Making all in cpan/Memoize
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
cp Memoize.pm ../../lib/Memoize.pm
cp Memoize/ExpireFile.pm ../../lib/Memoize/ExpireFile.pm
cp Memoize/ExpireTest.pm ../../lib/Memoize/ExpireTest.pm
cp Memoize/NDBM_File.pm ../../lib/Memoize/NDBM_File.pm
cp Memoize/AnyDBM_File.pm ../../lib/Memoize/AnyDBM_File.pm
cp Memoize/Expire.pm ../../lib/Memoize/Expire.pm
cp Memoize/Storable.pm ../../lib/Memoize/Storable.pm
cp Memoize/SDBM_File.pm ../../lib/Memoize/SDBM_File.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
../miniperl -Ilib make_ext.pl cpan/Module-Build/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Build (all)
Creating Makefile.PL in cpan/Module-Build for Module::Build
Running Makefile.PL in cpan/Module-Build
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Build
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
Making all in cpan/Module-Build
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
cp lib/Module/Build/Version.pm ../../lib/Module/Build/Version.pm
cp lib/Module/Build/Platform/darwin.pm ../../lib/Module/Build/Platform/darwin.pm
cp lib/Module/Build/Platform/MacOS.pm ../../lib/Module/Build/Platform/MacOS.pm
cp lib/Module/Build/Dumper.pm ../../lib/Module/Build/Dumper.pm
cp lib/Module/Build/Notes.pm ../../lib/Module/Build/Notes.pm
cp lib/Module/Build/Compat.pm ../../lib/Module/Build/Compat.pm
cp lib/Module/Build/Platform/RiscOS.pm ../../lib/Module/Build/Platform/RiscOS.pm
cp lib/Module/Build/ConfigData.pm ../../lib/Module/Build/ConfigData.pm
cp lib/Module/Build/PodParser.pm ../../lib/Module/Build/PodParser.pm
cp lib/Module/Build/Platform/VOS.pm ../../lib/Module/Build/Platform/VOS.pm
cp lib/Module/Build/Platform/Windows.pm ../../lib/Module/Build/Platform/Windows.pm
cp lib/inc/latest.pm ../../lib/inc/latest.pm
cp lib/Module/Build/Bundling.pod ../../lib/Module/Build/Bundling.pod
cp lib/Module/Build/Platform/Unix.pm ../../lib/Module/Build/Platform/Unix.pm
cp lib/Module/Build/ModuleInfo.pm ../../lib/Module/Build/ModuleInfo.pm
cp lib/Module/Build/Platform/Amiga.pm ../../lib/Module/Build/Platform/Amiga.pm
cp lib/Module/Build/Config.pm ../../lib/Module/Build/Config.pm
cp lib/Module/Build/Platform/os2.pm ../../lib/Module/Build/Platform/os2.pm
cp lib/Module/Build/Base.pm ../../lib/Module/Build/Base.pm
cp lib/Module/Build/Platform/MPEiX.pm ../../lib/Module/Build/Platform/MPEiX.pm
cp lib/Module/Build/Platform/VMS.pm ../../lib/Module/Build/Platform/VMS.pm
cp lib/Module/Build/Platform/cygwin.pm ../../lib/Module/Build/Platform/cygwin.pm
cp lib/Module/Build/Platform/EBCDIC.pm ../../lib/Module/Build/Platform/EBCDIC.pm
cp lib/Module/Build.pm ../../lib/Module/Build.pm
cp lib/Module/Build/PPMMaker.pm ../../lib/Module/Build/PPMMaker.pm
cp lib/Module/Build/Platform/aix.pm ../../lib/Module/Build/Platform/aix.pm
cp lib/Module/Build/Cookbook.pm ../../lib/Module/Build/Cookbook.pm
cp lib/Module/Build/Authoring.pod ../../lib/Module/Build/Authoring.pod
cp lib/inc/latest/private.pm ../../lib/inc/latest/private.pm
cp lib/Module/Build/Platform/Default.pm ../../lib/Module/Build/Platform/Default.pm
cp lib/Module/Build/YAML.pm ../../lib/Module/Build/YAML.pm
cp lib/Module/Build/API.pod ../../lib/Module/Build/API.pod
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
../miniperl -Ilib make_ext.pl dist/Module-CoreList/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::CoreList (all)
Running Makefile.PL in dist/Module-CoreList
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::CoreList
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
Making all in dist/Module-CoreList
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
cp lib/Module/CoreList.pm ../../lib/Module/CoreList.pm
cp corelist blib/script/corelist
/tmp/buildd/perl-5.14.2/dist/Module-CoreList/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/corelist
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
../miniperl -Ilib make_ext.pl cpan/Module-Load/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Load (all)
Creating Makefile.PL in cpan/Module-Load for Module::Load
Running Makefile.PL in cpan/Module-Load
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Load
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
Making all in cpan/Module-Load
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
cp lib/Module/Load.pm ../../lib/Module/Load.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
../miniperl -Ilib make_ext.pl cpan/Module-Load-Conditional/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Load::Conditional (all)
Creating Makefile.PL in cpan/Module-Load-Conditional for Module::Load::Conditional
Running Makefile.PL in cpan/Module-Load-Conditional
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Load::Conditional
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
Making all in cpan/Module-Load-Conditional
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
cp lib/Module/Load/Conditional.pm ../../lib/Module/Load/Conditional.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
../miniperl -Ilib make_ext.pl cpan/Module-Loaded/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Loaded (all)
Creating Makefile.PL in cpan/Module-Loaded for Module::Loaded
Running Makefile.PL in cpan/Module-Loaded
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Loaded
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
Making all in cpan/Module-Loaded
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
cp lib/Module/Loaded.pm ../../lib/Module/Loaded.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
../miniperl -Ilib make_ext.pl cpan/Module-Metadata/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Metadata (all)
Creating Makefile.PL in cpan/Module-Metadata for Module::Metadata
Running Makefile.PL in cpan/Module-Metadata
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Metadata
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
Making all in cpan/Module-Metadata
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
cp lib/Module/Metadata.pm ../../lib/Module/Metadata.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
../miniperl -Ilib make_ext.pl cpan/Module-Pluggable/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Pluggable (all)
Running Makefile.PL in cpan/Module-Pluggable
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Pluggable
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
Making all in cpan/Module-Pluggable
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
cp lib/Module/Pluggable/Object.pm ../../lib/Module/Pluggable/Object.pm
cp lib/Devel/InnerPackage.pm ../../lib/Devel/InnerPackage.pm
cp lib/Module/Pluggable.pm ../../lib/Module/Pluggable.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
../miniperl -Ilib make_ext.pl cpan/NEXT/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making NEXT (all)
Creating Makefile.PL in cpan/NEXT for NEXT
Running Makefile.PL in cpan/NEXT
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for NEXT
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
Making all in cpan/NEXT
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
cp lib/NEXT.pm ../../lib/NEXT.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
../miniperl -Ilib make_ext.pl dist/Net-Ping/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Net::Ping (all)
Creating Makefile.PL in dist/Net-Ping for Net::Ping
Running Makefile.PL in dist/Net-Ping
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Net::Ping
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
Making all in dist/Net-Ping
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
cp lib/Net/Ping.pm ../../lib/Net/Ping.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
../miniperl -Ilib make_ext.pl cpan/Object-Accessor/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Object::Accessor (all)
Creating Makefile.PL in cpan/Object-Accessor for Object::Accessor
Running Makefile.PL in cpan/Object-Accessor
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Object::Accessor
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
Making all in cpan/Object-Accessor
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
cp lib/Object/Accessor.pm ../../lib/Object/Accessor.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
../miniperl -Ilib make_ext.pl cpan/Package-Constants/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Package::Constants (all)
Creating Makefile.PL in cpan/Package-Constants for Package::Constants
Running Makefile.PL in cpan/Package-Constants
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Package::Constants
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
Making all in cpan/Package-Constants
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
cp lib/Package/Constants.pm ../../lib/Package/Constants.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
../miniperl -Ilib make_ext.pl cpan/Params-Check/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Params::Check (all)
Creating Makefile.PL in cpan/Params-Check for Params::Check
Running Makefile.PL in cpan/Params-Check
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Params::Check
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
Making all in cpan/Params-Check
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
cp lib/Params/Check.pm ../../lib/Params/Check.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
../miniperl -Ilib make_ext.pl cpan/Parse-CPAN-Meta/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Parse::CPAN::Meta (all)
Creating Makefile.PL in cpan/Parse-CPAN-Meta for Parse::CPAN::Meta
Running Makefile.PL in cpan/Parse-CPAN-Meta
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Parse::CPAN::Meta
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
Making all in cpan/Parse-CPAN-Meta
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
cp lib/Parse/CPAN/Meta.pm ../../lib/Parse/CPAN/Meta.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
../miniperl -Ilib make_ext.pl cpan/Perl-OSType/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Perl::OSType (all)
Creating Makefile.PL in cpan/Perl-OSType for Perl::OSType
Running Makefile.PL in cpan/Perl-OSType
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Perl::OSType
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
Making all in cpan/Perl-OSType
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
cp lib/Perl/OSType.pm ../../lib/Perl/OSType.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
../miniperl -Ilib make_ext.pl cpan/PerlIO-via-QuotedPrint/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making PerlIO::via::QuotedPrint (all)
Creating Makefile.PL in cpan/PerlIO-via-QuotedPrint for PerlIO::via::QuotedPrint
Running Makefile.PL in cpan/PerlIO-via-QuotedPrint
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for PerlIO::via::QuotedPrint
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
Making all in cpan/PerlIO-via-QuotedPrint
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
cp lib/PerlIO/via/QuotedPrint.pm ../../lib/PerlIO/via/QuotedPrint.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
../miniperl -Ilib make_ext.pl cpan/Pod-Escapes/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::Escapes (all)
Creating Makefile.PL in cpan/Pod-Escapes for Pod::Escapes
Running Makefile.PL in cpan/Pod-Escapes
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::Escapes
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
Making all in cpan/Pod-Escapes
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
cp lib/Pod/Escapes.pm ../../lib/Pod/Escapes.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
../miniperl -Ilib make_ext.pl ext/Pod-Html/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::Html (all)
Creating Makefile.PL in ext/Pod-Html for Pod::Html
Running Makefile.PL in ext/Pod-Html
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::Html
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
Making all in ext/Pod-Html
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
cp Html.pm ../../lib/Pod/Html.pm
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" pod2html.PL pod2html
Extracting pod2html (with variable substitutions)
cp pod2html blib/script/pod2html
/tmp/buildd/perl-5.14.2/ext/Pod-Html/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2html
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
../miniperl -Ilib make_ext.pl cpan/Pod-LaTeX/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::LaTeX (all)
Creating Makefile.PL in cpan/Pod-LaTeX for Pod::LaTeX
Running Makefile.PL in cpan/Pod-LaTeX
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::LaTeX
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
Making all in cpan/Pod-LaTeX
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
cp lib/Pod/LaTeX.pm ../../lib/Pod/LaTeX.pm
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" pod2latex.PL pod2latex
Extracting pod2latex (with variable substitutions)
cp pod2latex blib/script/pod2latex
/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2latex
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
../miniperl -Ilib make_ext.pl cpan/Pod-Parser/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::Parser (all)
Creating Makefile.PL in cpan/Pod-Parser for Pod::Parser
Running Makefile.PL in cpan/Pod-Parser
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::Parser
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
Making all in cpan/Pod-Parser
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
cp lib/Pod/InputObjects.pm ../../lib/Pod/InputObjects.pm
cp lib/Pod/Select.pm ../../lib/Pod/Select.pm
cp lib/Pod/Checker.pm ../../lib/Pod/Checker.pm
cp lib/Pod/PlainText.pm ../../lib/Pod/PlainText.pm
cp lib/Pod/ParseUtils.pm ../../lib/Pod/ParseUtils.pm
cp lib/Pod/Find.pm ../../lib/Pod/Find.pm
cp lib/Pod/Usage.pm ../../lib/Pod/Usage.pm
cp lib/Pod/Parser.pm ../../lib/Pod/Parser.pm
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" podchecker.PL podchecker
Extracting podchecker (with variable substitutions)
cp podchecker blib/script/podchecker
/tmp/buildd/perl-5.14.2/cpan/Pod-Parser/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/podchecker
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" pod2usage.PL pod2usage
Extracting pod2usage (with variable substitutions)
cp pod2usage blib/script/pod2usage
/tmp/buildd/perl-5.14.2/cpan/Pod-Parser/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2usage
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" podselect.PL podselect
Extracting podselect (with variable substitutions)
cp podselect blib/script/podselect
/tmp/buildd/perl-5.14.2/cpan/Pod-Parser/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/podselect
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
../miniperl -Ilib make_ext.pl dist/Pod-Perldoc/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::Perldoc (all)
Creating Makefile.PL in dist/Pod-Perldoc for Pod::Perldoc
Running Makefile.PL in dist/Pod-Perldoc
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::Perldoc
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
Making all in dist/Pod-Perldoc
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
cp lib/Pod/Perldoc/ToNroff.pm ../../lib/Pod/Perldoc/ToNroff.pm
cp lib/Pod/Perldoc/ToTk.pm ../../lib/Pod/Perldoc/ToTk.pm
cp lib/Pod/Perldoc/ToText.pm ../../lib/Pod/Perldoc/ToText.pm
cp lib/Pod/Perldoc.pm ../../lib/Pod/Perldoc.pm
cp lib/Pod/Perldoc/BaseTo.pm ../../lib/Pod/Perldoc/BaseTo.pm
cp lib/Pod/Perldoc/ToMan.pm ../../lib/Pod/Perldoc/ToMan.pm
cp lib/Pod/Perldoc/ToRtf.pm ../../lib/Pod/Perldoc/ToRtf.pm
cp lib/Pod/Perldoc/GetOptsOO.pm ../../lib/Pod/Perldoc/GetOptsOO.pm
cp lib/Pod/Perldoc/ToChecker.pm ../../lib/Pod/Perldoc/ToChecker.pm
cp lib/Pod/Perldoc/ToXml.pm ../../lib/Pod/Perldoc/ToXml.pm
cp lib/Pod/Perldoc/ToPod.pm ../../lib/Pod/Perldoc/ToPod.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
../miniperl -Ilib make_ext.pl cpan/Pod-Simple/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::Simple (all)
Creating Makefile.PL in cpan/Pod-Simple for Pod::Simple
Running Makefile.PL in cpan/Pod-Simple
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::Simple
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
Making all in cpan/Pod-Simple
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
cp lib/Pod/Simple/LinkSection.pm ../../lib/Pod/Simple/LinkSection.pm
cp lib/Pod/Simple/DumpAsText.pm ../../lib/Pod/Simple/DumpAsText.pm
cp lib/Pod/Simple/Progress.pm ../../lib/Pod/Simple/Progress.pm
cp lib/Pod/Simple/XMLOutStream.pm ../../lib/Pod/Simple/XMLOutStream.pm
cp lib/Pod/Simple/TextContent.pm ../../lib/Pod/Simple/TextContent.pm
cp lib/Pod/Simple/Search.pm ../../lib/Pod/Simple/Search.pm
cp lib/Pod/Simple/TranscodeSmart.pm ../../lib/Pod/Simple/TranscodeSmart.pm
cp lib/Pod/Simple/Text.pm ../../lib/Pod/Simple/Text.pm
cp lib/Pod/Simple/PullParserStartToken.pm ../../lib/Pod/Simple/PullParserStartToken.pm
cp lib/Pod/Simple/Debug.pm ../../lib/Pod/Simple/Debug.pm
cp lib/Pod/Simple/Methody.pm ../../lib/Pod/Simple/Methody.pm
cp lib/Pod/Simple/PullParserEndToken.pm ../../lib/Pod/Simple/PullParserEndToken.pm
cp lib/Pod/Simple/PullParserTextToken.pm ../../lib/Pod/Simple/PullParserTextToken.pm
cp lib/Pod/Simple.pm ../../lib/Pod/Simple.pm
cp lib/Pod/Simple/HTMLBatch.pm ../../lib/Pod/Simple/HTMLBatch.pm
cp lib/Pod/Simple/TranscodeDumb.pm ../../lib/Pod/Simple/TranscodeDumb.pm
cp lib/Pod/Simple/RTF.pm ../../lib/Pod/Simple/RTF.pm
cp lib/Pod/Simple/Checker.pm ../../lib/Pod/Simple/Checker.pm
cp lib/Pod/Simple/PullParser.pm ../../lib/Pod/Simple/PullParser.pm
cp lib/Pod/Simple/PullParserToken.pm ../../lib/Pod/Simple/PullParserToken.pm
cp lib/Pod/Simple/SimpleTree.pm ../../lib/Pod/Simple/SimpleTree.pm
cp lib/Pod/Simple/TiedOutFH.pm ../../lib/Pod/Simple/TiedOutFH.pm
cp lib/Pod/Simple/XHTML.pm ../../lib/Pod/Simple/XHTML.pm
cp lib/Pod/Simple/HTML.pm ../../lib/Pod/Simple/HTML.pm
cp lib/Pod/Simple/Subclassing.pod ../../lib/Pod/Simple/Subclassing.pod
cp lib/Pod/Simple.pod ../../lib/Pod/Simple.pod
cp lib/Pod/Simple/DumpAsXML.pm ../../lib/Pod/Simple/DumpAsXML.pm
cp lib/Pod/Simple/BlackBox.pm ../../lib/Pod/Simple/BlackBox.pm
cp lib/Pod/Simple/HTMLLegacy.pm ../../lib/Pod/Simple/HTMLLegacy.pm
cp lib/Pod/Simple/Transcode.pm ../../lib/Pod/Simple/Transcode.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
../miniperl -Ilib make_ext.pl dist/Safe/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Safe (all)
Running Makefile.PL in dist/Safe
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Safe
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Safe'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Safe'
Making all in dist/Safe
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Safe'
cp Safe.pm ../../lib/Safe.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Safe'
../miniperl -Ilib make_ext.pl dist/SelfLoader/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making SelfLoader (all)
Creating Makefile.PL in dist/SelfLoader for SelfLoader
Running Makefile.PL in dist/SelfLoader
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for SelfLoader
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
Making all in dist/SelfLoader
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
cp lib/SelfLoader.pm ../../lib/SelfLoader.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
../miniperl -Ilib make_ext.pl cpan/Shell/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Shell (all)
Creating Makefile.PL in cpan/Shell for Shell
Running Makefile.PL in cpan/Shell
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Shell
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
Making all in cpan/Shell
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
cp Shell.pm ../../lib/Shell.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
../miniperl -Ilib make_ext.pl cpan/Term-ANSIColor/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Term::ANSIColor (all)
Creating Makefile.PL in cpan/Term-ANSIColor for Term::ANSIColor
Running Makefile.PL in cpan/Term-ANSIColor
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Term::ANSIColor
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
Making all in cpan/Term-ANSIColor
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
cp ANSIColor.pm ../../lib/Term/ANSIColor.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
../miniperl -Ilib make_ext.pl cpan/Term-Cap/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Term::Cap (all)
Creating Makefile.PL in cpan/Term-Cap for Term::Cap
Running Makefile.PL in cpan/Term-Cap
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Term::Cap
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
Making all in cpan/Term-Cap
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
cp Cap.pm ../../lib/Term/Cap.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
../miniperl -Ilib make_ext.pl cpan/Term-UI/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Term::UI (all)
Creating Makefile.PL in cpan/Term-UI for Term::UI
Running Makefile.PL in cpan/Term-UI
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Term::UI
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
Making all in cpan/Term-UI
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
cp lib/Term/UI/History.pm ../../lib/Term/UI/History.pm
cp lib/Term/UI.pm ../../lib/Term/UI.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
../miniperl -Ilib make_ext.pl cpan/Test/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Test (all)
Creating Makefile.PL in cpan/Test for Test
Running Makefile.PL in cpan/Test
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Test
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test'
Making all in cpan/Test
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test'
cp lib/Test.pm ../../lib/Test.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test'
../miniperl -Ilib make_ext.pl cpan/Test-Harness/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Test::Harness (all)
Creating Makefile.PL in cpan/Test-Harness for Test::Harness
Running Makefile.PL in cpan/Test-Harness
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Test::Harness
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
Making all in cpan/Test-Harness
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
cp lib/TAP/Parser/Result/Pragma.pm ../../lib/TAP/Parser/Result/Pragma.pm
cp lib/App/Prove/State/Result.pm ../../lib/App/Prove/State/Result.pm
cp lib/TAP/Parser/Iterator/Array.pm ../../lib/TAP/Parser/Iterator/Array.pm
cp lib/TAP/Base.pm ../../lib/TAP/Base.pm
cp lib/TAP/Formatter/Console/ParallelSession.pm ../../lib/TAP/Formatter/Console/ParallelSession.pm
cp lib/TAP/Parser/Result.pm ../../lib/TAP/Parser/Result.pm
cp lib/TAP/Formatter/Console/Session.pm ../../lib/TAP/Formatter/Console/Session.pm
cp lib/TAP/Parser/Scheduler/Job.pm ../../lib/TAP/Parser/Scheduler/Job.pm
cp lib/TAP/Parser/Result/YAML.pm ../../lib/TAP/Parser/Result/YAML.pm
cp lib/TAP/Parser.pm ../../lib/TAP/Parser.pm
cp lib/TAP/Parser/SourceHandler/Handle.pm ../../lib/TAP/Parser/SourceHandler/Handle.pm
cp lib/TAP/Parser/IteratorFactory.pm ../../lib/TAP/Parser/IteratorFactory.pm
cp lib/TAP/Parser/Iterator.pm ../../lib/TAP/Parser/Iterator.pm
cp lib/TAP/Formatter/Color.pm ../../lib/TAP/Formatter/Color.pm
cp lib/TAP/Parser/Iterator/Process.pm ../../lib/TAP/Parser/Iterator/Process.pm
cp lib/TAP/Parser/Grammar.pm ../../lib/TAP/Parser/Grammar.pm
cp lib/Test/Harness.pm ../../lib/Test/Harness.pm
cp lib/TAP/Formatter/File/Session.pm ../../lib/TAP/Formatter/File/Session.pm
cp lib/TAP/Formatter/Base.pm ../../lib/TAP/Formatter/Base.pm
cp lib/TAP/Parser/ResultFactory.pm ../../lib/TAP/Parser/ResultFactory.pm
cp lib/TAP/Parser/Utils.pm ../../lib/TAP/Parser/Utils.pm
cp lib/TAP/Parser/Result/Bailout.pm ../../lib/TAP/Parser/Result/Bailout.pm
cp lib/TAP/Object.pm ../../lib/TAP/Object.pm
cp lib/TAP/Parser/Multiplexer.pm ../../lib/TAP/Parser/Multiplexer.pm
cp lib/TAP/Parser/SourceHandler/Perl.pm ../../lib/TAP/Parser/SourceHandler/Perl.pm
cp lib/TAP/Parser/YAMLish/Writer.pm ../../lib/TAP/Parser/YAMLish/Writer.pm
cp lib/TAP/Parser/Result/Version.pm ../../lib/TAP/Parser/Result/Version.pm
cp lib/TAP/Parser/Result/Unknown.pm ../../lib/TAP/Parser/Result/Unknown.pm
cp lib/TAP/Parser/YAMLish/Reader.pm ../../lib/TAP/Parser/YAMLish/Reader.pm
cp lib/TAP/Parser/Scheduler.pm ../../lib/TAP/Parser/Scheduler.pm
cp lib/TAP/Parser/Result/Plan.pm ../../lib/TAP/Parser/Result/Plan.pm
cp lib/TAP/Parser/SourceHandler.pm ../../lib/TAP/Parser/SourceHandler.pm
cp lib/TAP/Parser/SourceHandler/Executable.pm ../../lib/TAP/Parser/SourceHandler/Executable.pm
cp lib/TAP/Parser/Result/Test.pm ../../lib/TAP/Parser/Result/Test.pm
cp lib/App/Prove/State/Result/Test.pm ../../lib/App/Prove/State/Result/Test.pm
cp lib/TAP/Parser/SourceHandler/RawTAP.pm ../../lib/TAP/Parser/SourceHandler/RawTAP.pm
cp lib/TAP/Parser/Result/Comment.pm ../../lib/TAP/Parser/Result/Comment.pm
cp lib/TAP/Parser/Iterator/Stream.pm ../../lib/TAP/Parser/Iterator/Stream.pm
cp lib/TAP/Parser/SourceHandler/File.pm ../../lib/TAP/Parser/SourceHandler/File.pm
cp lib/TAP/Harness/Beyond.pod ../../lib/TAP/Harness/Beyond.pod
cp lib/TAP/Formatter/Session.pm ../../lib/TAP/Formatter/Session.pm
cp lib/App/Prove.pm ../../lib/App/Prove.pm
cp lib/App/Prove/State.pm ../../lib/App/Prove/State.pm
cp lib/TAP/Harness.pm ../../lib/TAP/Harness.pm
cp lib/TAP/Formatter/File.pm ../../lib/TAP/Formatter/File.pm
cp lib/TAP/Parser/Aggregator.pm ../../lib/TAP/Parser/Aggregator.pm
cp lib/TAP/Parser/Scheduler/Spinner.pm ../../lib/TAP/Parser/Scheduler/Spinner.pm
cp lib/TAP/Formatter/Console.pm ../../lib/TAP/Formatter/Console.pm
cp lib/TAP/Parser/Source.pm ../../lib/TAP/Parser/Source.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
../miniperl -Ilib make_ext.pl cpan/Test-Simple/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Test::Simple (all)
Creating Makefile.PL in cpan/Test-Simple for Test::Simple
Running Makefile.PL in cpan/Test-Simple
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Test::Simple
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
Making all in cpan/Test-Simple
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
cp lib/Test/Builder/Tester/Color.pm ../../lib/Test/Builder/Tester/Color.pm
cp lib/Test/Builder.pm ../../lib/Test/Builder.pm
cp lib/Test/Simple.pm ../../lib/Test/Simple.pm
cp lib/Test/More.pm ../../lib/Test/More.pm
cp lib/Test/Builder/Tester.pm ../../lib/Test/Builder/Tester.pm
cp lib/Test/Builder/Module.pm ../../lib/Test/Builder/Module.pm
cp lib/Test/Tutorial.pod ../../lib/Test/Tutorial.pod
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
../miniperl -Ilib make_ext.pl cpan/Text-Balanced/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Text::Balanced (all)
Creating Makefile.PL in cpan/Text-Balanced for Text::Balanced
Running Makefile.PL in cpan/Text-Balanced
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Text::Balanced
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
Making all in cpan/Text-Balanced
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
cp lib/Text/Balanced.pm ../../lib/Text/Balanced.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
../miniperl -Ilib make_ext.pl cpan/Text-ParseWords/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Text::ParseWords (all)
Creating Makefile.PL in cpan/Text-ParseWords for Text::ParseWords
Running Makefile.PL in cpan/Text-ParseWords
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Text::ParseWords
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
Making all in cpan/Text-ParseWords
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
cp lib/Text/ParseWords.pm ../../lib/Text/ParseWords.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
../miniperl -Ilib make_ext.pl cpan/Text-Tabs/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Text::Tabs (all)
Creating Makefile.PL in cpan/Text-Tabs for Text::Tabs
Running Makefile.PL in cpan/Text-Tabs
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Text::Tabs
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
Making all in cpan/Text-Tabs
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
cp lib/Text/Tabs.pm ../../lib/Text/Tabs.pm
cp lib/Text/Wrap.pm ../../lib/Text/Wrap.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
../miniperl -Ilib make_ext.pl dist/Thread-Queue/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Thread::Queue (all)
Creating Makefile.PL in dist/Thread-Queue for Thread::Queue
Running Makefile.PL in dist/Thread-Queue
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Thread::Queue
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
Making all in dist/Thread-Queue
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
cp lib/Thread/Queue.pm ../../lib/Thread/Queue.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
../miniperl -Ilib make_ext.pl dist/Thread-Semaphore/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Thread::Semaphore (all)
Creating Makefile.PL in dist/Thread-Semaphore for Thread::Semaphore
Running Makefile.PL in dist/Thread-Semaphore
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Thread::Semaphore
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
Making all in dist/Thread-Semaphore
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
cp lib/Thread/Semaphore.pm ../../lib/Thread/Semaphore.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
../miniperl -Ilib make_ext.pl cpan/Tie-File/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Tie::File (all)
Creating Makefile.PL in cpan/Tie-File for Tie::File
Running Makefile.PL in cpan/Tie-File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Tie::File
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
Making all in cpan/Tie-File
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
cp lib/Tie/File.pm ../../lib/Tie/File.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
../miniperl -Ilib make_ext.pl ext/Tie-Memoize/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Tie::Memoize (all)
Creating Makefile.PL in ext/Tie-Memoize for Tie::Memoize
Running Makefile.PL in ext/Tie-Memoize
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Tie::Memoize
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
Making all in ext/Tie-Memoize
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
cp lib/Tie/Memoize.pm ../../lib/Tie/Memoize.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
../miniperl -Ilib make_ext.pl cpan/Tie-RefHash/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Tie::RefHash (all)
Creating Makefile.PL in cpan/Tie-RefHash for Tie::RefHash
Running Makefile.PL in cpan/Tie-RefHash
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Tie::RefHash
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
Making all in cpan/Tie-RefHash
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
cp lib/Tie/RefHash.pm ../../lib/Tie/RefHash.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
../miniperl -Ilib make_ext.pl cpan/Time-Local/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Time::Local (all)
Creating Makefile.PL in cpan/Time-Local for Time::Local
Running Makefile.PL in cpan/Time-Local
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Time::Local
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
Making all in cpan/Time-Local
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
cp lib/Time/Local.pm ../../lib/Time/Local.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
../miniperl -Ilib make_ext.pl cpan/Version-Requirements/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Version::Requirements (all)
Creating Makefile.PL in cpan/Version-Requirements for Version::Requirements
Running Makefile.PL in cpan/Version-Requirements
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Version::Requirements
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
Making all in cpan/Version-Requirements
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
cp lib/Version/Requirements.pm ../../lib/Version/Requirements.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
../miniperl -Ilib make_ext.pl dist/XSLoader/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making XSLoader (all)
Running Makefile.PL in dist/XSLoader
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for XSLoader
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
Making all in dist/XSLoader
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
.../../miniperl "-I../../lib" "-I../../lib" XSLoader_pm.PL XSLoader.pm
cp XSLoader.pm ../../lib/XSLoader.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
../miniperl -Ilib make_ext.pl cpan/autodie/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making autodie (all)
Creating Makefile.PL in cpan/autodie for autodie
Running Makefile.PL in cpan/autodie
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for autodie
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
Making all in cpan/autodie
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
cp lib/Fatal.pm ../../lib/Fatal.pm
cp lib/autodie/exception.pm ../../lib/autodie/exception.pm
cp lib/autodie/hints.pm ../../lib/autodie/hints.pm
cp lib/autodie.pm ../../lib/autodie.pm
cp lib/autodie/exception/system.pm ../../lib/autodie/exception/system.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
../miniperl -Ilib make_ext.pl dist/autouse/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making autouse (all)
Creating Makefile.PL in dist/autouse for autouse
Running Makefile.PL in dist/autouse
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for autouse
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/autouse'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/autouse'
Making all in dist/autouse
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/autouse'
cp lib/autouse.pm ../../lib/autouse.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/autouse'
../miniperl -Ilib make_ext.pl dist/base/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making base (all)
Creating Makefile.PL in dist/base for base
Running Makefile.PL in dist/base
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for base
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/base'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/base'
Making all in dist/base
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/base'
cp lib/fields.pm ../../lib/fields.pm
cp lib/base.pm ../../lib/base.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/base'
../miniperl -Ilib make_ext.pl dist/bignum/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making bignum (all)
Creating Makefile.PL in dist/bignum for bignum
Running Makefile.PL in dist/bignum
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for bignum
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/bignum'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/bignum'
Making all in dist/bignum
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/bignum'
cp lib/bignum.pm ../../lib/bignum.pm
cp lib/bigrat.pm ../../lib/bigrat.pm
cp lib/Math/BigFloat/Trace.pm ../../lib/Math/BigFloat/Trace.pm
cp lib/bigint.pm ../../lib/bigint.pm
cp lib/Math/BigInt/Trace.pm ../../lib/Math/BigInt/Trace.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/bignum'
../miniperl -Ilib make_ext.pl dist/constant/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making constant (all)
Creating Makefile.PL in dist/constant for constant
Running Makefile.PL in dist/constant
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for constant
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/constant'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/constant'
Making all in dist/constant
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/constant'
cp lib/constant.pm ../../lib/constant.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/constant'
../miniperl -Ilib make_ext.pl cpan/encoding-warnings/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making encoding::warnings (all)
Creating Makefile.PL in cpan/encoding-warnings for encoding::warnings
Running Makefile.PL in cpan/encoding-warnings
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for encoding::warnings
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
Making all in cpan/encoding-warnings
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
cp lib/encoding/warnings.pm ../../lib/encoding/warnings.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
../miniperl -Ilib make_ext.pl dist/if/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making if (all)
Creating Makefile.PL in dist/if for if
Running Makefile.PL in dist/if
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for if
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/if'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/if'
Making all in dist/if
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/if'
cp if.pm ../../lib/if.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/if'
../miniperl -Ilib make_ext.pl dist/lib/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making lib (all)
Running Makefile.PL in dist/lib
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for lib
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/lib'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/lib'
Making all in dist/lib
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/lib'
.../../miniperl "-I../../lib" "-I../../lib" lib_pm.PL lib.pm
Extracting lib.pm (with variable substitutions)
cp lib.pm ../../lib/lib.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/lib'
../miniperl -Ilib make_ext.pl cpan/libnet/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making libnet (all)
Running Makefile.PL in cpan/libnet
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Net
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
Making all in cpan/libnet
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
cp Net/POP3.pm ../../lib/Net/POP3.pm
cp Net/SMTP.pm ../../lib/Net/SMTP.pm
cp Net/Config.pm ../../lib/Net/Config.pm
cp Net/FTP/dataconn.pm ../../lib/Net/FTP/dataconn.pm
cp Net/libnetFAQ.pod ../../lib/Net/libnetFAQ.pod
cp Net/Domain.pm ../../lib/Net/Domain.pm
cp Net/FTP/E.pm ../../lib/Net/FTP/E.pm
cp Net/Cmd.pm ../../lib/Net/Cmd.pm
cp Net/FTP.pm ../../lib/Net/FTP.pm
cp Net/Netrc.pm ../../lib/Net/Netrc.pm
cp Net/FTP/L.pm ../../lib/Net/FTP/L.pm
cp Net/FTP/A.pm ../../lib/Net/FTP/A.pm
cp Net/NNTP.pm ../../lib/Net/NNTP.pm
cp Net/Time.pm ../../lib/Net/Time.pm
cp Net/FTP/I.pm ../../lib/Net/FTP/I.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
../miniperl -Ilib make_ext.pl cpan/parent/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making parent (all)
Creating Makefile.PL in cpan/parent for parent
Running Makefile.PL in cpan/parent
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for parent
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/parent'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/parent'
Making all in cpan/parent
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/parent'
cp lib/parent.pm ../../lib/parent.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/parent'
../miniperl -Ilib make_ext.pl cpan/podlators/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making podlators (all)
Creating Makefile.PL in cpan/podlators for podlators
Running Makefile.PL in cpan/podlators
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
Making all in cpan/podlators
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
cp lib/Pod/ParseLink.pm ../../lib/Pod/ParseLink.pm
cp lib/Pod/Text/Termcap.pm ../../lib/Pod/Text/Termcap.pm
cp lib/Pod/Text.pm ../../lib/Pod/Text.pm
cp lib/Pod/Text/Color.pm ../../lib/Pod/Text/Color.pm
cp lib/Pod/Text/Overstrike.pm ../../lib/Pod/Text/Overstrike.pm
cp lib/Pod/Man.pm ../../lib/Pod/Man.pm
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" pod2text.PL pod2text
Extracting pod2text (with variable substitutions)
cp pod2text blib/script/pod2text
/tmp/buildd/perl-5.14.2/cpan/podlators/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2text
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" pod2man.PL pod2man
Extracting pod2man (with variable substitutions)
cp pod2man blib/script/pod2man
/tmp/buildd/perl-5.14.2/cpan/podlators/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2man
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
../miniperl -Ilib make_ext.pl DynaLoader.o MAKE=/usr/bin/make LIBPERL_A=libperl.a LINKTYPE=static CCCDLFLAGS=
Making DynaLoader (all)
Running Makefile.PL in ext/DynaLoader
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a LINKTYPE=static CCCDLFLAGS=
Processing hints file hints/linux.pl
Writing Makefile for DynaLoader
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
Making all in ext/DynaLoader
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a LINKTYPE=static CCCDLFLAGS=
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
.../../miniperl "-I../../lib" "-I../../lib" DynaLoader_pm.PL DynaLoader.pm
cp DynaLoader.pm ../../lib/DynaLoader.pm
rm -f DynaLoader.xs
cp dl_dlopen.xs DynaLoader.xs
.../../miniperl "-I../../lib" "-I../../lib" ../../lib/ExtUtils/xsubpp -noprototypes -typemap ../../lib/ExtUtils/typemap DynaLoader.xs > DynaLoader.xsc && mv DynaLoader.xsc DynaLoader.c
cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"1.13\" -DXS_VERSION=\"1.13\" "-I../.." -DLIBC="" DynaLoader.c
rm -rf ../../DynaLoader.o
cp DynaLoader.o ../../DynaLoader.o
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
rm -f libperl.a
/usr/bin/ar rcu libperl.a op.o perl.o gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o keywords.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o DynaLoader.o
cc -o perl -fstack-protector -L/usr/local/lib -Wl,-E perlmain.o libperl.a `cat ext.libs` -ldl -lm -lpthread -lc -lcrypt
make[1]: Leaving directory `/tmp/buildd/perl-5.14.2'
mv libperl.a libperl-static
mv perl perl.static
# for the build log
../perl.static -Ilib -V
Summary of my perl5 (revision 5 version 14 subversion 2) configuration:
Platform:
osname=linux, osvers=3.2.0-1+m68k.1-atari, archname=m68k-linux-gnu-thread-multi-64int
uname='linux ara5.mirbsd.org 3.2.0-1+m68k.1-atari #1 mon jan 23 06:44:50 utc 2012 m68k gnulinux '
config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcccdlflags=-fPIC -Darchname=m68k-linux-gnu -Dprefix=/usr -Dprivlib=/usr/share/perl/5.14 -Darchlib=/usr/lib/perl/5.14 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.14.2 -Dsitearch=/usr/local/lib/perl/5.14.2 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Duse64bitint -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Ud_ualarm -Uusesfio -Uusenm -Ui_libutil -DDEBUGGING=-g -Doptimize=-O2 -Uuseshrplib -des'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.6.2', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=2, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/m68k-linux-gnu /lib /usr/lib/m68k-linux-gnu /usr/lib
libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt
perllibs=-ldl -lm -lpthread -lc -lcrypt
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.13'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_INT USE_ITHREADS
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
DEBPKG:debian/arm_thread_stress_timeout - http://bugs.debian.org/501970 Raise the timeout of ext/threads/shared/t/stress.t to accommodate slower build hosts
DEBPKG:debian/cpan_definstalldirs - Provide a sensible INSTALLDIRS default for modules installed from CPAN.
DEBPKG:debian/db_file_ver - http://bugs.debian.org/340047 Remove overly restrictive DB_File version check.
DEBPKG:debian/doc_info - Replace generic man(1) instructions with Debian-specific information.
DEBPKG:debian/enc2xs_inc - http://bugs.debian.org/290336 Tweak enc2xs to follow symlinks and ignore missing @INC directories.
DEBPKG:debian/errno_ver - http://bugs.debian.org/343351 Remove Errno version check due to upgrade problems with long-running processes.
DEBPKG:debian/libperl_embed_doc - http://bugs.debian.org/186778 Note that libperl-dev package is required for embedded linking
DEBPKG:fixes/respect_umask - Respect umask during installation
DEBPKG:debian/writable_site_dirs - Set umask approproately for site install directories
DEBPKG:debian/extutils_set_libperl_path - EU:MM: Set location of libperl.a to /usr/lib
DEBPKG:debian/no_packlist_perllocal - Don't install .packlist or perllocal.pod for perl or vendor
DEBPKG:debian/prefix_changes - Fiddle with *PREFIX and variables written to the makefile
DEBPKG:debian/fakeroot - Postpone LD_LIBRARY_PATH evaluation to the binary targets.
DEBPKG:debian/instmodsh_doc - Debian policy doesn't install .packlist files for core or vendor.
DEBPKG:debian/ld_run_path - Remove standard libs from LD_RUN_PATH as per Debian policy.
DEBPKG:debian/libnet_config_path - Set location of libnet.cfg to /etc/perl/Net as /usr may not be writable.
DEBPKG:debian/m68k_thread_stress - http://bugs.debian.org/517938 http://bugs.debian.org/495826 Disable some threads tests on m68k for now due to missing TLS.
DEBPKG:debian/mod_paths - Tweak @INC ordering for Debian
DEBPKG:debian/module_build_man_extensions - http://bugs.debian.org/479460 Adjust Module::Build manual page extensions for the Debian Perl policy
DEBPKG:debian/prune_libs - http://bugs.debian.org/128355 Prune the list of libraries wanted to what we actually need.
DEBPKG:fixes/net_smtp_docs - [rt.cpan.org #36038] http://bugs.debian.org/100195 Document the Net::SMTP 'Port' option
DEBPKG:debian/perlivp - http://bugs.debian.org/510895 Make perlivp skip include directories in /usr/local
DEBPKG:debian/disable-zlib-bundling - Disable zlib bundling in Compress::Raw::Zlib
DEBPKG:debian/cpanplus_definstalldirs - http://bugs.debian.org/533707 Configure CPANPLUS to use the site directories by default.
DEBPKG:debian/cpanplus_config_path - Save local versions of CPANPLUS::Config::System into /etc/perl.
DEBPKG:debian/deprecate-with-apt - http://bugs.debian.org/580034 Point users to Debian packages of deprecated core modules
DEBPKG:fixes/hurd-ccflags - [a190e64] http://bugs.debian.org/587901 [perl #92244] Make hints/gnu.sh append to $ccflags rather than overriding them
DEBPKG:debian/squelch-locale-warnings - http://bugs.debian.org/508764 Squelch locale warnings in Debian package maintainer scripts
DEBPKG:debian/skip-upstream-git-tests - Skip tests specific to the upstream Git repository
DEBPKG:fixes/extutils-cbuilder-cflags - [011e8fb] http://bugs.debian.org/624460 [perl #89478] Append CFLAGS and LDFLAGS to their Config.pm counterparts in EU::CBuilder
DEBPKG:fixes/module-build-home-directory - http://bugs.debian.org/624850 [rt.cpan.org #67893] Fix failing tilde test when run under a UID without a passwd entry
DEBPKG:debian/patchlevel - http://bugs.debian.org/567489 List packaged patches for 5.14.2-7 in patchlevel.h
DEBPKG:fixes/h2ph-multiarch - [e7ec705] http://bugs.debian.org/625808 [perl #90122] Make h2ph correctly search gcc include directories
DEBPKG:fixes/index-tainting - [3b36395] http://bugs.debian.org/291450 [perl #64804] RT 64804: tainting with index() of a constant
DEBPKG:debian/skip-kfreebsd-crash - http://bugs.debian.org/628493 [perl #96272] Skip a crashing test case in t/op/threads.t on GNU/kFreeBSD
DEBPKG:fixes/document_makemaker_ccflags - http://bugs.debian.org/628522 [rt.cpan.org #68613] Document that CCFLAGS should include $Config{ccflags}
DEBPKG:fixes/sys-syslog-socket-timeout-kfreebsd.patch - http://bugs.debian.org/627821 [rt.cpan.org #69997] Use a socket timeout on GNU/kFreeBSD to catch ICMP port unreachable messages
DEBPKG:fixes/hurd-hints - http://bugs.debian.org/636609 Improve general GNU hints, needed for GNU/Hurd.
DEBPKG:fixes/pod_fixes - [7698aed] http://bugs.debian.org/637816 Fix typos in several pod/perl*.pod files
DEBPKG:debian/find_html2text - http://bugs.debian.org/640479 Configure CPAN::Distribution with correct name of html2text
DEBPKG:fixes/digest_eval_hole - http://bugs.debian.org/644108 Close the eval "require $module" security hole in Digest->new($algorithm)
DEBPKG:fixes/hurd-ndbm - [f0d0a20] [perl #102680] http://bugs.debian.org/645989 Add GNU/Hurd hints for NDBM_File
DEBPKG:fixes/sysconf.t-posix - [8040185] [perl #102888] http://bugs.debian.org/646016 Fix hang in ext/POSIX/t/sysconf.t on GNU/Hurd
DEBPKG:fixes/hurd-largefile - [1fda587] [perl #103014] http://bugs.debian.org/645790 enable LFS on GNU/Hurd
DEBPKG:debian/hurd_test_todo_syslog - http://bugs.debian.org/650093 Disable failing GNU/Hurd tests in cpan/Sys-Syslog/t/syslog.t
DEBPKG:fixes/hurd_skip_itimer_virtual - [rt.cpan.org #72754] http://bugs.debian.org/650094 Skip interval timer tests in Time::HiRes on GNU/Hurd
DEBPKG:debian/hurd_test_skip_sigdispatch - http://bugs.debian.org/650188 Disable failing GNU/Hurd tests op/sigdispatch.t
DEBPKG:debian/hurd_test_skip_stack - http://bugs.debian.org/650175 Disable failing GNU/Hurd tests dist/threads/t/stack.t
DEBPKG:debian/hurd_test_skip_pipe - http://bugs.debian.org/650187 Disable failing GNU/Hurd tests io/pipe.t
DEBPKG:debian/hurd_test_skip_io_pipe - http://bugs.debian.org/650096 Disable failing GNU/Hurd tests dist/IO/t/io_pipe.t
DEBPKG:fixes/manpage_name_CPAN - http://bugs.debian.org/650448 [rt.cpan.org #73396] cpan/CPAN: add NAME headings in modules with POD
DEBPKG:fixes/manpage_name_CPANPLUS - http://bugs.debian.org/650450 [rt.cpan.org #73398] cpan/CPANPLUS: add NAME headings in modules with POD
DEBPKG:fixes/manpage_name_Test-Harness - http://bugs.debian.org/650451 [rt.cpan.org #73399] cpan/Test-Harness: add NAME headings in modules with POD
DEBPKG:fixes/manpage_name_Term-UI - http://bugs.debian.org/650452 [rt.cpan.org #73400] cpan/Term-UI: add NAME headings in modules with POD
DEBPKG:fixes/podlators_ae_ligature_fallback - http://bugs.debian.org/652851 Fix the ASCII fallback string for AE
DEBPKG:fixes/fsf_postal_address - [de89470] Update references to the FSF's postal address
DEBPKG:fixes/cpan_module_pod_fixes - [perl #106870] [rt.cpan.org #73447] [rt.cpan.org #73446] Fix POD formatting in Term-Cap and Pod-Parser
Built under linux
Compiled at Jan 30 2012 18:31:15
@INC:
lib
/etc/perl
/usr/local/lib/perl/5.14.2
/usr/local/share/perl/5.14.2
/usr/lib/perl5
/usr/share/perl5
/usr/lib/perl/5.14
/usr/share/perl/5.14
/usr/local/lib/site_perl
.
test -d debian
rm -f libperl.so* # must be built last
[ ! -f Makefile ] || /usr/bin/make distclean
make[1]: Entering directory `/tmp/buildd/perl-5.14.2'
make[2]: Entering directory `/tmp/buildd/perl-5.14.2'
cd os2; rm -f Makefile
cd pod; /usr/bin/make distclean
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/pod'
rm -f perl.man perl5004delta.man perl5005delta.man perl5100delta.man perl5101delta.man perl5110delta.man perl5111delta.man perl5112delta.man perl5113delta.man perl5114delta.man perl5115delta.man perl5120delta.man perl5121delta.man perl5122delta.man perl5123delta.man perl5130delta.man perl51310delta.man perl51311delta.man perl5131delta.man perl5132delta.man perl5133delta.man perl5134delta.man perl5135delta.man perl5136delta.man perl5137delta.man perl5138delta.man perl5139delta.man perl5140delta.man perl5141delta.man perl561delta.man perl56delta.man perl570delta.man perl571delta.man perl572delta.man perl573delta.man perl581delta.man perl582delta.man perl583delta.man perl584delta.man perl585delta.man perl586delta.man perl587delta.man perl588delta.man perl589delta.man perl58delta.man perl590delta.man perl591delta.man perl592delta.man perl593delta.man perl594delta.man perl595delta.man perlapio.man perlartistic.man perlbook.man perlboot.man perlbot.man perlcall.man perlcheat.man perlclib.man perlcommunity.man perlcompile.man perldata.man perldbmfilter.man perldebguts.man perldebtut.man perldebug.man perldelta.man perldiag.man perldoc.man perldsc.man perlebcdic.man perlembed.man perlfaq.man perlfaq1.man perlfaq2.man perlfaq3.man perlfaq4.man perlfaq5.man perlfaq6.man perlfaq7.man perlfaq8.man perlfaq9.man perlfilter.man perlfork.man perlform.man perlfunc.man perlgit.man perlglossary.man perlgpl.man perlguts.man perlhack.man perlhacktips.man perlhacktut.man perlhist.man perlinterp.man perlintro.man perliol.man perlipc.man perllexwarn.man perllocale.man perllol.man perlmod.man perlmodinstall.man perlmodstyle.man perlmroapi.man perlnewmod.man perlnumber.man perlobj.man perlop.man perlopentut.man perlpacktut.man perlperf.man perlpod.man perlpodspec.man perlpodstyle.man perlpolicy.man perlport.man perlpragma.man perlre.man perlreapi.man perlrebackslash.man perlrecharclass.man perlref.man perlreftut.man perlreguts.man perlrequick.man perlreref.man perlretut.man perlrun.man perlsec.man perlsource.man perlstyle.man perlsub.man perlsyn.man perlthrtut.man perltie.man perltodo.man perltooc.man perltoot.man perltrap.man perlunicode.man perlunifaq.man perluniintro.man perlunitut.man perlutil.man perlvar.man perlvms.man perlxs.man perlxstut.man
rm -f perl.html perl5004delta.html perl5005delta.html perl5100delta.html perl5101delta.html perl5110delta.html perl5111delta.html perl5112delta.html perl5113delta.html perl5114delta.html perl5115delta.html perl5120delta.html perl5121delta.html perl5122delta.html perl5123delta.html perl5130delta.html perl51310delta.html perl51311delta.html perl5131delta.html perl5132delta.html perl5133delta.html perl5134delta.html perl5135delta.html perl5136delta.html perl5137delta.html perl5138delta.html perl5139delta.html perl5140delta.html perl5141delta.html perl561delta.html perl56delta.html perl570delta.html perl571delta.html perl572delta.html perl573delta.html perl581delta.html perl582delta.html perl583delta.html perl584delta.html perl585delta.html perl586delta.html perl587delta.html perl588delta.html perl589delta.html perl58delta.html perl590delta.html perl591delta.html perl592delta.html perl593delta.html perl594delta.html perl595delta.html perlapio.html perlartistic.html perlbook.html perlboot.html perlbot.html perlcall.html perlcheat.html perlclib.html perlcommunity.html perlcompile.html perldata.html perldbmfilter.html perldebguts.html perldebtut.html perldebug.html perldelta.html perldiag.html perldoc.html perldsc.html perlebcdic.html perlembed.html perlfaq.html perlfaq1.html perlfaq2.html perlfaq3.html perlfaq4.html perlfaq5.html perlfaq6.html perlfaq7.html perlfaq8.html perlfaq9.html perlfilter.html perlfork.html perlform.html perlfunc.html perlgit.html perlglossary.html perlgpl.html perlguts.html perlhack.html perlhacktips.html perlhacktut.html perlhist.html perlinterp.html perlintro.html perliol.html perlipc.html perllexwarn.html perllocale.html perllol.html perlmod.html perlmodinstall.html perlmodstyle.html perlmroapi.html perlnewmod.html perlnumber.html perlobj.html perlop.html perlopentut.html perlpacktut.html perlperf.html perlpod.html perlpodspec.html perlpodstyle.html perlpolicy.html perlport.html perlpragma.html perlre.html perlreapi.html perlrebackslash.html perlrecharclass.html perlref.html perlreftut.html perlreguts.html perlrequick.html perlreref.html perlretut.html perlrun.html perlsec.html perlsource.html perlstyle.html perlsub.html perlsyn.html perlthrtut.html perltie.html perltodo.html perltooc.html perltoot.html perltrap.html perlunicode.html perlunifaq.html perluniintro.html perlunitut.html perlutil.html perlvar.html perlvms.html perlxs.html perlxstut.html
rm -f perl.tex perl5004delta.tex perl5005delta.tex perl5100delta.tex perl5101delta.tex perl5110delta.tex perl5111delta.tex perl5112delta.tex perl5113delta.tex perl5114delta.tex perl5115delta.tex perl5120delta.tex perl5121delta.tex perl5122delta.tex perl5123delta.tex perl5130delta.tex perl51310delta.tex perl51311delta.tex perl5131delta.tex perl5132delta.tex perl5133delta.tex perl5134delta.tex perl5135delta.tex perl5136delta.tex perl5137delta.tex perl5138delta.tex perl5139delta.tex perl5140delta.tex perl5141delta.tex perl561delta.tex perl56delta.tex perl570delta.tex perl571delta.tex perl572delta.tex perl573delta.tex perl581delta.tex perl582delta.tex perl583delta.tex perl584delta.tex perl585delta.tex perl586delta.tex perl587delta.tex perl588delta.tex perl589delta.tex perl58delta.tex perl590delta.tex perl591delta.tex perl592delta.tex perl593delta.tex perl594delta.tex perl595delta.tex perlapio.tex perlartistic.tex perlbook.tex perlboot.tex perlbot.tex perlcall.tex perlcheat.tex perlclib.tex perlcommunity.tex perlcompile.tex perldata.tex perldbmfilter.tex perldebguts.tex perldebtut.tex perldebug.tex perldelta.tex perldiag.tex perldoc.tex perldsc.tex perlebcdic.tex perlembed.tex perlfaq.tex perlfaq1.tex perlfaq2.tex perlfaq3.tex perlfaq4.tex perlfaq5.tex perlfaq6.tex perlfaq7.tex perlfaq8.tex perlfaq9.tex perlfilter.tex perlfork.tex perlform.tex perlfunc.tex perlgit.tex perlglossary.tex perlgpl.tex perlguts.tex perlhack.tex perlhacktips.tex perlhacktut.tex perlhist.tex perlinterp.tex perlintro.tex perliol.tex perlipc.tex perllexwarn.tex perllocale.tex perllol.tex perlmod.tex perlmodinstall.tex perlmodstyle.tex perlmroapi.tex perlnewmod.tex perlnumber.tex perlobj.tex perlop.tex perlopentut.tex perlpacktut.tex perlperf.tex perlpod.tex perlpodspec.tex perlpodstyle.tex perlpolicy.tex perlport.tex perlpragma.tex perlre.tex perlreapi.tex perlrebackslash.tex perlrecharclass.tex perlref.tex perlreftut.tex perlreguts.tex perlrequick.tex perlreref.tex perlretut.tex perlrun.tex perlsec.tex perlsource.tex perlstyle.tex perlsub.tex perlsyn.tex perlthrtut.tex perltie.tex perltodo.tex perltooc.tex perltoot.tex perltrap.tex perlunicode.tex perlunifaq.tex perluniintro.tex perlunitut.tex perlutil.tex perlvar.tex perlvms.tex perlxs.tex perlxstut.tex
rm -f pod2html-*cache
rm -f *.aux *.log *.exe
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/pod'
cd utils; /usr/bin/make distclean
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/utils'
rm -rf c2ph config_data corelist cpan h2ph h2xs instmodsh json_pp perlbug perldoc perlivp pl2pm prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum splain dprofpp libnetcfg piconv enc2xs xsubpp pstruct ./c2ph ./config_data ./corelist ./cpan ./h2ph ./h2xs ./json_pp ./instmodsh ./perlbug ./perldoc ./perlivp ./pl2pm ./prove ./ptar ./ptardiff ./ptargrep ./cpanp-run-perl ./cpanp ./cpan2dist ./shasum ./splain ./dprofpp ./libnetcfg ./piconv ./enc2xs ./xsubpp
rm -f ../t/_h2ph_pre.ph
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/utils'
cd x2p; /usr/bin/make distclean
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
rm -f a2p psed *.o find2perl.exe s2p.exe find2perl.c s2p.c a2p.loadmap
rmdir .depending
rmdir: failed to remove `.depending': No such file or directory
make[3]: [realclean] Error 1 (ignored)
rm -f core Makefile cflags find2perl s2p all malloc.c
rm -f makefile makefile.old makefile.old
rm -f *~ *.orig
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
Making DynaLoader (distclean)
Making distclean in ext/DynaLoader
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
rm -f \
dl_symbian.c dl_none.c \
core.[0-9] dl_vms.c \
DynaLoader.bso pm_to_blib.ts \
dl_mpeix.c core.[0-9][0-9][0-9][0-9] \
MYMETA.yml perl \
tmon.out *.o \
pm_to_blib blibdirs.ts \
dl_next.c dl_dld.c \
dl_dllload.c *perl.core \
core.*perl.*.? dl_vmesa.c \
DynaLoader.def core.[0-9][0-9][0-9] \
mon.out dl_dyld.c \
libDynaLoader.def perl.exe \
perlmain.c so_locations \
DynaLoader.exp *.a \
core dl_aix.c \
../../lib/auto/DynaLoader/extralibs.all core.[0-9][0-9] \
DynaLoader.x \
dl_win32.c ../../lib/auto/DynaLoader/extralibs.ld \
core.[0-9][0-9][0-9][0-9][0-9] dl_beos.c \
Makefile.aperl perl \
dl_hpux.c dl_dlopen.c
rm -rf \
DynaLoader.c DynaLoader.pm \
DynaLoader.xs blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
DynaLoader.o ../../lib/DynaLoader.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/DynaLoader ../../lib/auto/DynaLoader \
DynaLoader-1.13
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: dl_aix.xs
Not in MANIFEST: dl_beos.xs
Not in MANIFEST: dl_dld.xs
Not in MANIFEST: dl_dllload.xs
Not in MANIFEST: dl_dlopen.xs
Not in MANIFEST: dl_dyld.xs
Not in MANIFEST: dl_hpux.xs
Not in MANIFEST: dl_mpeix.xs
Not in MANIFEST: dl_next.xs
Not in MANIFEST: dl_none.xs
Not in MANIFEST: dl_symbian.xs
Not in MANIFEST: dl_vmesa.xs
Not in MANIFEST: dl_vms.xs
Not in MANIFEST: dl_win32.xs
Not in MANIFEST: dlutils.c
Not in MANIFEST: DynaLoader_pm.PL
Not in MANIFEST: hints/aix.pl
Not in MANIFEST: hints/gnukfreebsd.pl
Not in MANIFEST: hints/gnuknetbsd.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: hints/netbsd.pl
Not in MANIFEST: hints/openbsd.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: README
Not in MANIFEST: t/DynaLoader.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
Making B (distclean)
Running Makefile.PL in ext/B
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for B
Writing MYMETA.yml
Making distclean in ext/B
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/B'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/B/extralibs.all \
core.[0-9][0-9] B.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml B.x \
B.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/B/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
B.c Makefile.aperl \
B.def perl \
core.[0-9][0-9][0-9] mon.out \
libB.def perlmain.c \
perl.exe so_locations \
B.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
B.o ../../lib/O.pm \
../../lib/B.pm Makefile.old \
../../lib/B/Xref.pm ../../lib/B/Concise.pm \
../../lib/B/Terse.pm Makefile \
../../lib/B/Showlex.pm
rm -rf \
../../lib/auto/B const-c.inc \
../../lib/auto/B const-xs.inc \
B-1.29
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: B.pm
Not in MANIFEST: B.xs
Not in MANIFEST: B/Concise.pm
Not in MANIFEST: B/Showlex.pm
Not in MANIFEST: B/Terse.pm
Not in MANIFEST: B/Xref.pm
Not in MANIFEST: hints/darwin.pl
Not in MANIFEST: hints/openbsd.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: O.pm
Not in MANIFEST: t/b.t
Not in MANIFEST: t/concise-xs.t
Not in MANIFEST: t/concise.t
Not in MANIFEST: t/f_map
Not in MANIFEST: t/f_map.t
Not in MANIFEST: t/f_sort
Not in MANIFEST: t/f_sort.t
Not in MANIFEST: t/o.t
Not in MANIFEST: t/optree_check.t
Not in MANIFEST: t/optree_concise.t
Not in MANIFEST: t/optree_constants.t
Not in MANIFEST: t/optree_misc.t
Not in MANIFEST: t/optree_samples.t
Not in MANIFEST: t/optree_sort.t
Not in MANIFEST: t/optree_specials.t
Not in MANIFEST: t/optree_varinit.t
Not in MANIFEST: t/OptreeCheck.pm
Not in MANIFEST: t/pragma.t
Not in MANIFEST: t/showlex.t
Not in MANIFEST: t/terse.t
Not in MANIFEST: t/walkoptree.t
Not in MANIFEST: t/xref.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/B'
Making Compress::Raw::Bzip2 (distclean)
Running Makefile.PL in cpan/Compress-Raw-Bzip2
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Compress::Raw::Bzip2
Writing MYMETA.yml
Making distclean in cpan/Compress-Raw-Bzip2
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Compress-Raw-Bzip2'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Compress/Raw/Bzip2/extralibs.all \
core.[0-9][0-9] Bzip2.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Bzip2.x \
Bzip2.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Compress/Raw/Bzip2/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl Bzip2.def \
perl core.[0-9][0-9][0-9] \
mon.out libBzip2.def \
perlmain.c perl.exe \
so_locations Bzip2.exp \
Bzip2.c
rm -rf \
bzlib.h constants.xs \
constants.h bzlib_private.h \
*.c blib \
bzip2.h
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Bzip2.o ../../lib/Compress/Raw/Bzip2.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Compress/Raw/Bzip2 ../../lib/auto/Compress/Raw/Bzip2 \
Compress-Raw-Bzip2-2.033
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bzip2-src/blocksort.c
Not in MANIFEST: bzip2-src/bzlib.c
Not in MANIFEST: bzip2-src/bzlib.h
Not in MANIFEST: bzip2-src/bzlib_private.h
Not in MANIFEST: bzip2-src/compress.c
Not in MANIFEST: bzip2-src/crctable.c
Not in MANIFEST: bzip2-src/decompress.c
Not in MANIFEST: bzip2-src/huffman.c
Not in MANIFEST: bzip2-src/LICENSE
Not in MANIFEST: bzip2-src/randtable.c
Not in MANIFEST: Bzip2.xs
Not in MANIFEST: Changes
Not in MANIFEST: fallback/constants.h
Not in MANIFEST: fallback/constants.xs
Not in MANIFEST: lib/Compress/Raw/Bzip2.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: pod/FAQ.pod
Not in MANIFEST: private/MakeUtil.pm
Not in MANIFEST: README
Not in MANIFEST: t/000prereq.t
Not in MANIFEST: t/01bzip2.t
Not in MANIFEST: t/09limitoutput.t
Not in MANIFEST: t/99pod.t
Not in MANIFEST: t/compress/CompTestUtils.pm
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Compress-Raw-Bzip2'
Making Compress::Raw::Zlib (distclean)
Running Makefile.PL in cpan/Compress-Raw-Zlib
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Parsing config.in...
Auto Detect Gzip OS Code..
Setting Gzip OS Code to 3 [Unix/Default]
Looks Good.
Writing Makefile for Compress::Raw::Zlib
Writing MYMETA.yml
Making distclean in cpan/Compress-Raw-Zlib
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Compress-Raw-Zlib'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Compress/Raw/Zlib/extralibs.all \
core.[0-9][0-9] Zlib.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Zlib.x \
Zlib.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Compress/Raw/Zlib/extralibs.ld \
Zlib.c blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Zlib.def perl \
core.[0-9][0-9][0-9] mon.out \
libZlib.def perlmain.c \
perl.exe so_locations \
Zlib.exp
rm -rf \
constants.xs constants.h \
*.c blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Compress/Raw/Zlib.pm Zlib.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Compress/Raw/Zlib ../../lib/auto/Compress/Raw/Zlib \
Compress-Raw-Zlib-2.033
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: config.in
Not in MANIFEST: examples/filtdef
Not in MANIFEST: examples/filtinf
Not in MANIFEST: fallback/constants.h
Not in MANIFEST: fallback/constants.xs
Not in MANIFEST: lib/Compress/Raw/Zlib.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: pod/FAQ.pod
Not in MANIFEST: private/MakeUtil.pm
Not in MANIFEST: README
Not in MANIFEST: t/01version.t
Not in MANIFEST: t/02zlib.t
Not in MANIFEST: t/07bufsize.t
Not in MANIFEST: t/09limitoutput.t
Not in MANIFEST: t/18lvalue.t
Not in MANIFEST: t/compress/CompTestUtils.pm
Not in MANIFEST: typemap
Not in MANIFEST: zlib-src/adler32.c
Not in MANIFEST: zlib-src/compress.c
Not in MANIFEST: zlib-src/crc32.c
Not in MANIFEST: zlib-src/crc32.h
Not in MANIFEST: zlib-src/deflate.c
Not in MANIFEST: zlib-src/deflate.h
Not in MANIFEST: zlib-src/infback.c
Not in MANIFEST: zlib-src/inffast.c
Not in MANIFEST: zlib-src/inffast.h
Not in MANIFEST: zlib-src/inffixed.h
Not in MANIFEST: zlib-src/inflate.c
Not in MANIFEST: zlib-src/inflate.h
Not in MANIFEST: zlib-src/inftrees.c
Not in MANIFEST: zlib-src/inftrees.h
Not in MANIFEST: zlib-src/trees.c
Not in MANIFEST: zlib-src/trees.h
Not in MANIFEST: zlib-src/uncompr.c
Not in MANIFEST: zlib-src/zconf.h
Not in MANIFEST: zlib-src/zlib.h
Not in MANIFEST: zlib-src/zutil.c
Not in MANIFEST: zlib-src/zutil.h
Not in MANIFEST: Zlib.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Compress-Raw-Zlib'
Making Cwd (distclean)
Creating Makefile.PL in dist/Cwd for Cwd
Running Makefile.PL in dist/Cwd
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Cwd
Writing MYMETA.yml
Making distclean in dist/Cwd
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Cwd'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Cwd/extralibs.all \
core.[0-9][0-9] Cwd.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Cwd.x \
Cwd.bs Cwd.c \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Cwd/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Cwd.def perl \
core.[0-9][0-9][0-9] mon.out \
libCwd.def perlmain.c \
perl.exe so_locations \
Cwd.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/File/Spec/Unix.pm ../../lib/File/Spec.pm \
../../lib/File/Spec/VMS.pm Cwd.o \
../../lib/File/Spec/Cygwin.pm ../../lib/File/Spec/Mac.pm \
../../lib/File/Spec/Win32.pm ../../lib/File/Spec/Functions.pm \
Makefile.old ../../lib/File/Spec/OS2.pm \
../../lib/Cwd.pm Makefile \
../../lib/File/Spec/Epoc.pm
rm -rf \
../../lib/auto/Cwd ../../lib/auto/Cwd \
Cwd-3.36 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Cwd.pm
Not in MANIFEST: Cwd.xs
Not in MANIFEST: lib/File/Spec.pm
Not in MANIFEST: lib/File/Spec/Cygwin.pm
Not in MANIFEST: lib/File/Spec/Epoc.pm
Not in MANIFEST: lib/File/Spec/Functions.pm
Not in MANIFEST: lib/File/Spec/Mac.pm
Not in MANIFEST: lib/File/Spec/OS2.pm
Not in MANIFEST: lib/File/Spec/Unix.pm
Not in MANIFEST: lib/File/Spec/VMS.pm
Not in MANIFEST: lib/File/Spec/Win32.pm
Not in MANIFEST: t/crossplatform.t
Not in MANIFEST: t/cwd.t
Not in MANIFEST: t/Functions.t
Not in MANIFEST: t/rel2abs2rel.t
Not in MANIFEST: t/Spec.t
Not in MANIFEST: t/taint.t
Not in MANIFEST: t/tmpdir.t
Not in MANIFEST: t/win32.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Cwd'
Making DB_File (distclean)
Running Makefile.PL in cpan/DB_File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Parsing config.in...
Looks Good.
Writing Makefile for DB_File
Writing MYMETA.yml
Making distclean in cpan/DB_File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/DB_File'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/DB_File/extralibs.all \
core.[0-9][0-9] DB_File.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml DB_File.x \
DB_File.bs perl \
tmon.out *.o \
DB_File.c pm_to_blib \
../../lib/auto/DB_File/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
DB_File.def perl \
core.[0-9][0-9][0-9] mon.out \
libDB_File.def perlmain.c \
perl.exe so_locations \
DB_File.exp
rm -rf \
constants.xs constants.h \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
version.o DB_File.o ../../lib/DB_File.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/DB_File ../../lib/auto/DB_File \
DB_File-1.821
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: config.in
Not in MANIFEST: DB_File.pm
Not in MANIFEST: DB_File.xs
Not in MANIFEST: DB_File_BS
Not in MANIFEST: dbinfo
Not in MANIFEST: hints/dynixptx.pl
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/db-btree.t
Not in MANIFEST: t/db-hash.t
Not in MANIFEST: t/db-recno.t
Not in MANIFEST: typemap
Not in MANIFEST: version.c
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/DB_File'
Making Data::Dumper (distclean)
Creating Makefile.PL in dist/Data-Dumper for Data::Dumper
Running Makefile.PL in dist/Data-Dumper
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Data::Dumper
Writing MYMETA.yml
Making distclean in dist/Data-Dumper
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Data-Dumper'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Data/Dumper/extralibs.all \
core.[0-9][0-9] Dumper.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Dumper.x \
Dumper.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Data/Dumper/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Dumper.c Makefile.aperl \
Dumper.def perl \
core.[0-9][0-9][0-9] mon.out \
libDumper.def perlmain.c \
perl.exe so_locations \
Dumper.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Data/Dumper.pm Dumper.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Data/Dumper ../../lib/auto/Data/Dumper \
Data-Dumper-2.130_02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Dumper.pm
Not in MANIFEST: Dumper.xs
Not in MANIFEST: t/bless.t
Not in MANIFEST: t/bugs.t
Not in MANIFEST: t/dumper.t
Not in MANIFEST: t/freezer.t
Not in MANIFEST: t/overload.t
Not in MANIFEST: t/pair.t
Not in MANIFEST: t/perl-74170.t
Not in MANIFEST: t/terse.t
Not in MANIFEST: Todo
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Data-Dumper'
Making Devel::DProf (distclean)
Creating Makefile.PL in cpan/Devel-DProf for Devel::DProf
Running Makefile.PL in cpan/Devel-DProf
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Devel::DProf
Writing MYMETA.yml
Making distclean in cpan/Devel-DProf
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Devel-DProf'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Devel/DProf/extralibs.all \
core.[0-9][0-9] DProf.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml DProf.x \
DProf.bs perl \
tmon.out *.o \
pm_to_blib DProf.c \
../../lib/auto/Devel/DProf/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
DProf.def perl \
core.[0-9][0-9][0-9] mon.out \
libDProf.def perlmain.c \
perl.exe so_locations \
DProf.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
DProf.o ../../lib/Devel/DProf.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Devel/DProf ../../lib/auto/Devel/DProf \
Devel-DProf-20110228.00 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bin/dprofpp
Not in MANIFEST: DProf.pm
Not in MANIFEST: DProf.xs
Not in MANIFEST: dprof/test1_t
Not in MANIFEST: dprof/test1_v
Not in MANIFEST: dprof/test2_t
Not in MANIFEST: dprof/test2_v
Not in MANIFEST: dprof/test3_t
Not in MANIFEST: dprof/test3_v
Not in MANIFEST: dprof/test4_t
Not in MANIFEST: dprof/test4_v
Not in MANIFEST: dprof/test5_t
Not in MANIFEST: dprof/test5_v
Not in MANIFEST: dprof/test6_t
Not in MANIFEST: dprof/test6_v
Not in MANIFEST: dprof/test7_t
Not in MANIFEST: dprof/test7_v
Not in MANIFEST: dprof/test8_t
Not in MANIFEST: dprof/test8_v
Not in MANIFEST: dprof/V.pm
Not in MANIFEST: t/DProf.t
Not in MANIFEST: Todo
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Devel-DProf'
Making Devel::PPPort (distclean)
Running Makefile.PL in cpan/Devel-PPPort
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Setting license tag...
Writing Makefile for Devel::PPPort
Writing MYMETA.yml
Making distclean in cpan/Devel-PPPort
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Devel-PPPort'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Devel/PPPort/extralibs.all \
core.[0-9][0-9] PPPort.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml PPPort.x \
PPPort.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Devel/PPPort/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
RealPPPort.c *perl.core \
core.*perl.*.? Makefile.aperl \
PPPort.def perl \
core.[0-9][0-9][0-9] mon.out \
libPPPort.def perlmain.c \
perl.exe so_locations \
PPPort.exp
rm -rf \
PPPort.pm RealPPPort.xs \
RealPPPort.c blib \
ppport.h
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
RealPPPort.o module2.o module3.o ../../lib/Devel/PPPort.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Devel/PPPort ../../lib/auto/Devel/PPPort \
Devel-PPPort-3.19
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: apicheck_c.PL
Not in MANIFEST: Changes
Not in MANIFEST: devel/buildperl.pl
Not in MANIFEST: devel/devtools.pl
Not in MANIFEST: devel/mkapidoc.sh
Not in MANIFEST: devel/mktodo
Not in MANIFEST: devel/mktodo.pl
Not in MANIFEST: devel/regenerate
Not in MANIFEST: devel/scanprov
Not in MANIFEST: HACKERS
Not in MANIFEST: Makefile.PL
Not in MANIFEST: MANIFEST.SKIP
Not in MANIFEST: mktests.PL
Not in MANIFEST: module2.c
Not in MANIFEST: module3.c
Not in MANIFEST: parts/apicheck.pl
Not in MANIFEST: parts/apidoc.fnc
Not in MANIFEST: parts/base/5004000
Not in MANIFEST: parts/base/5004010
Not in MANIFEST: parts/base/5004020
Not in MANIFEST: parts/base/5004030
Not in MANIFEST: parts/base/5004040
Not in MANIFEST: parts/base/5004050
Not in MANIFEST: parts/base/5005000
Not in MANIFEST: parts/base/5005010
Not in MANIFEST: parts/base/5005020
Not in MANIFEST: parts/base/5005030
Not in MANIFEST: parts/base/5005040
Not in MANIFEST: parts/base/5006000
Not in MANIFEST: parts/base/5006001
Not in MANIFEST: parts/base/5006002
Not in MANIFEST: parts/base/5007000
Not in MANIFEST: parts/base/5007001
Not in MANIFEST: parts/base/5007002
Not in MANIFEST: parts/base/5007003
Not in MANIFEST: parts/base/5008000
Not in MANIFEST: parts/base/5008001
Not in MANIFEST: parts/base/5008002
Not in MANIFEST: parts/base/5008003
Not in MANIFEST: parts/base/5008004
Not in MANIFEST: parts/base/5008005
Not in MANIFEST: parts/base/5008006
Not in MANIFEST: parts/base/5008007
Not in MANIFEST: parts/base/5008008
Not in MANIFEST: parts/base/5009000
Not in MANIFEST: parts/base/5009001
Not in MANIFEST: parts/base/5009002
Not in MANIFEST: parts/base/5009003
Not in MANIFEST: parts/base/5009004
Not in MANIFEST: parts/base/5009005
Not in MANIFEST: parts/base/5010000
Not in MANIFEST: parts/base/5011000
Not in MANIFEST: parts/embed.fnc
Not in MANIFEST: parts/inc/call
Not in MANIFEST: parts/inc/cop
Not in MANIFEST: parts/inc/exception
Not in MANIFEST: parts/inc/format
Not in MANIFEST: parts/inc/grok
Not in MANIFEST: parts/inc/gv
Not in MANIFEST: parts/inc/HvNAME
Not in MANIFEST: parts/inc/limits
Not in MANIFEST: parts/inc/magic
Not in MANIFEST: parts/inc/memory
Not in MANIFEST: parts/inc/misc
Not in MANIFEST: parts/inc/mPUSH
Not in MANIFEST: parts/inc/MY_CXT
Not in MANIFEST: parts/inc/newCONSTSUB
Not in MANIFEST: parts/inc/newRV
Not in MANIFEST: parts/inc/newSV_type
Not in MANIFEST: parts/inc/newSVpv
Not in MANIFEST: parts/inc/podtest
Not in MANIFEST: parts/inc/ppphbin
Not in MANIFEST: parts/inc/ppphdoc
Not in MANIFEST: parts/inc/ppphtest
Not in MANIFEST: parts/inc/pv_tools
Not in MANIFEST: parts/inc/pvs
Not in MANIFEST: parts/inc/shared_pv
Not in MANIFEST: parts/inc/snprintf
Not in MANIFEST: parts/inc/sprintf
Not in MANIFEST: parts/inc/strlfuncs
Not in MANIFEST: parts/inc/Sv_set
Not in MANIFEST: parts/inc/sv_xpvf
Not in MANIFEST: parts/inc/SvPV
Not in MANIFEST: parts/inc/SvREFCNT
Not in MANIFEST: parts/inc/threads
Not in MANIFEST: parts/inc/uv
Not in MANIFEST: parts/inc/variables
Not in MANIFEST: parts/inc/version
Not in MANIFEST: parts/inc/warn
Not in MANIFEST: parts/ppport.fnc
Not in MANIFEST: parts/ppptools.pl
Not in MANIFEST: parts/todo/5004000
Not in MANIFEST: parts/todo/5004010
Not in MANIFEST: parts/todo/5004020
Not in MANIFEST: parts/todo/5004030
Not in MANIFEST: parts/todo/5004040
Not in MANIFEST: parts/todo/5004050
Not in MANIFEST: parts/todo/5005000
Not in MANIFEST: parts/todo/5005010
Not in MANIFEST: parts/todo/5005020
Not in MANIFEST: parts/todo/5005030
Not in MANIFEST: parts/todo/5005040
Not in MANIFEST: parts/todo/5006000
Not in MANIFEST: parts/todo/5006001
Not in MANIFEST: parts/todo/5006002
Not in MANIFEST: parts/todo/5007000
Not in MANIFEST: parts/todo/5007001
Not in MANIFEST: parts/todo/5007002
Not in MANIFEST: parts/todo/5007003
Not in MANIFEST: parts/todo/5008000
Not in MANIFEST: parts/todo/5008001
Not in MANIFEST: parts/todo/5008002
Not in MANIFEST: parts/todo/5008003
Not in MANIFEST: parts/todo/5008004
Not in MANIFEST: parts/todo/5008005
Not in MANIFEST: parts/todo/5008006
Not in MANIFEST: parts/todo/5008007
Not in MANIFEST: parts/todo/5008008
Not in MANIFEST: parts/todo/5009000
Not in MANIFEST: parts/todo/5009001
Not in MANIFEST: parts/todo/5009002
Not in MANIFEST: parts/todo/5009003
Not in MANIFEST: parts/todo/5009004
Not in MANIFEST: parts/todo/5009005
Not in MANIFEST: parts/todo/5010000
Not in MANIFEST: parts/todo/5011000
Not in MANIFEST: PPPort.xs
Not in MANIFEST: ppport_h.PL
Not in MANIFEST: PPPort_pm.PL
Not in MANIFEST: PPPort_xs.PL
Not in MANIFEST: README
Not in MANIFEST: soak
Not in MANIFEST: t/call.t
Not in MANIFEST: t/cop.t
Not in MANIFEST: t/exception.t
Not in MANIFEST: t/format.t
Not in MANIFEST: t/grok.t
Not in MANIFEST: t/gv.t
Not in MANIFEST: t/HvNAME.t
Not in MANIFEST: t/limits.t
Not in MANIFEST: t/magic.t
Not in MANIFEST: t/memory.t
Not in MANIFEST: t/misc.t
Not in MANIFEST: t/mPUSH.t
Not in MANIFEST: t/MY_CXT.t
Not in MANIFEST: t/newCONSTSUB.t
Not in MANIFEST: t/newRV.t
Not in MANIFEST: t/newSV_type.t
Not in MANIFEST: t/newSVpv.t
Not in MANIFEST: t/podtest.t
Not in MANIFEST: t/ppphtest.t
Not in MANIFEST: t/pv_tools.t
Not in MANIFEST: t/pvs.t
Not in MANIFEST: t/shared_pv.t
Not in MANIFEST: t/snprintf.t
Not in MANIFEST: t/sprintf.t
Not in MANIFEST: t/strlfuncs.t
Not in MANIFEST: t/Sv_set.t
Not in MANIFEST: t/sv_xpvf.t
Not in MANIFEST: t/SvPV.t
Not in MANIFEST: t/SvREFCNT.t
Not in MANIFEST: t/testutil.pl
Not in MANIFEST: t/threads.t
Not in MANIFEST: t/uv.t
Not in MANIFEST: t/variables.t
Not in MANIFEST: t/warn.t
Not in MANIFEST: TODO
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Devel-PPPort'
Making Devel::Peek (distclean)
Running Makefile.PL in ext/Devel-Peek
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Devel::Peek
Writing MYMETA.yml
Making distclean in ext/Devel-Peek
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Devel-Peek'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Devel/Peek/extralibs.all \
core.[0-9][0-9] Peek.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Peek.x \
Peek.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Devel/Peek/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
Peek.c *perl.core \
core.*perl.*.? Makefile.aperl \
Peek.def perl \
core.[0-9][0-9][0-9] mon.out \
libPeek.def perlmain.c \
perl.exe so_locations \
Peek.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Devel/Peek.pm Peek.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Devel/Peek ../../lib/auto/Devel/Peek \
Devel-Peek-1.07
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Makefile.PL
Not in MANIFEST: Peek.pm
Not in MANIFEST: Peek.xs
Not in MANIFEST: t/Peek.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Devel-Peek'
Making Digest::MD5 (distclean)
Running Makefile.PL in cpan/Digest-MD5
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Perl's config says that U32 access must be aligned.
Writing Makefile for Digest::MD5
Writing MYMETA.yml
Making distclean in cpan/Digest-MD5
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Digest-MD5'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Digest/MD5/extralibs.all \
core.[0-9][0-9] MD5.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml MD5.x \
MD5.bs MD5.c \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Digest/MD5/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
MD5.def perl \
core.[0-9][0-9][0-9] mon.out \
libMD5.def perlmain.c \
perl.exe so_locations \
MD5.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Digest/MD5.pm MD5.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Digest/MD5 ../../lib/auto/Digest/MD5 \
Digest-MD5-2.51
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: hints/dec_osf.pl
Not in MANIFEST: hints/irix_6.pl
Not in MANIFEST: hints/MacOS.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: MD5.pm
Not in MANIFEST: MD5.xs
Not in MANIFEST: README
Not in MANIFEST: t/align.t
Not in MANIFEST: t/badfile.t
Not in MANIFEST: t/bits.t
Not in MANIFEST: t/clone.t
Not in MANIFEST: t/files.t
Not in MANIFEST: t/md5-aaa.t
Not in MANIFEST: t/threads.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Digest-MD5'
Making Digest::SHA (distclean)
Running Makefile.PL in cpan/Digest-SHA
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Digest::SHA
Writing MYMETA.yml
Making distclean in cpan/Digest-SHA
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Digest-SHA'
rm -f \
blib/script/shasum
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Digest/SHA/extralibs.all \
core.[0-9][0-9] SHA.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml SHA.x \
SHA.bs perl \
tmon.out *.o \
pm_to_blib SHA.c \
../../lib/auto/Digest/SHA/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
SHA.def perl \
core.[0-9][0-9][0-9] mon.out \
libSHA.def perlmain.c \
perl.exe so_locations \
SHA.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Digest/SHA.pm SHA.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Digest/SHA ../../lib/auto/Digest/SHA \
Digest-SHA-5.61
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Digest/SHA.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: README
Not in MANIFEST: SHA.xs
Not in MANIFEST: shasum
Not in MANIFEST: src/hmac.c
Not in MANIFEST: src/hmac.h
Not in MANIFEST: src/hmacxtra.c
Not in MANIFEST: src/sha.c
Not in MANIFEST: src/sha.h
Not in MANIFEST: src/sha64bit.c
Not in MANIFEST: src/sha64bit.h
Not in MANIFEST: src/shaxtra.c
Not in MANIFEST: t/allfcns.t
Not in MANIFEST: t/base64.t
Not in MANIFEST: t/bitbuf.t
Not in MANIFEST: t/dumpload.t
Not in MANIFEST: t/fips180-4.t
Not in MANIFEST: t/fips198.t
Not in MANIFEST: t/gg.t
Not in MANIFEST: t/gglong.t
Not in MANIFEST: t/hmacsha.t
Not in MANIFEST: t/ireland.t
Not in MANIFEST: t/methods.t
Not in MANIFEST: t/nistbit.t
Not in MANIFEST: t/nistbyte.t
Not in MANIFEST: t/rfc2202.t
Not in MANIFEST: t/sha1.t
Not in MANIFEST: t/sha224.t
Not in MANIFEST: t/sha256.t
Not in MANIFEST: t/sha384.t
Not in MANIFEST: t/sha512.t
Not in MANIFEST: t/woodbury.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Digest-SHA'
Making Encode (distclean)
Running Makefile.PL in cpan/Encode
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Encode::Byte
Writing MYMETA.yml
Writing Makefile for Encode::CN
Writing MYMETA.yml
Writing Makefile for Encode::EBCDIC
Writing MYMETA.yml
Writing Makefile for Encode::JP
Writing MYMETA.yml
Writing Makefile for Encode::KR
Writing MYMETA.yml
Writing Makefile for Encode::Symbol
Writing MYMETA.yml
Writing Makefile for Encode::TW
Writing MYMETA.yml
Writing Makefile for Encode::Unicode
Writing MYMETA.yml
Writing Makefile for Encode
Writing MYMETA.yml
Making distclean in cpan/Encode
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode'
rm -f \
blib/script/piconv blib/script/enc2xs
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Byte'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Byte'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Byte/extralibs.all \
core.[0-9][0-9] Byte.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Byte.x \
Byte.bs Byte.c \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/Byte/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Byte.def perl \
core.[0-9][0-9][0-9] mon.out \
libByte.def perlmain.c \
perl.exe so_locations \
Byte.exp
rm -rf \
Byte.xs byte_t.fnm \
byte_t.c byte_t.o \
byte_t.exh byte_t.h \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Byte'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''CN'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/CN'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/CN/extralibs.all \
core.[0-9][0-9] CN.bso \
CN.c pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
CN.x CN.bs \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/CN/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
CN.def perl \
core.[0-9][0-9][0-9] mon.out \
libCN.def perl.exe \
perlmain.c so_locations \
CN.exp
rm -rf \
ir_04_t.exh ir_04_t.fnm \
ir_04_t.h gb_03_t.c \
ma_05_t.o cp_00_t.h \
gb_02_t.h ma_05_t.c \
cp_00_t.fnm eu_01_t.o \
gb_02_t.o gb_02_t.fnm \
cp_00_t.exh gb_02_t.c \
eu_01_t.exh ir_04_t.o \
eu_01_t.c ma_05_t.h \
gb_03_t.h ma_05_t.fnm \
gb_02_t.exh CN.xs \
eu_01_t.h gb_03_t.fnm \
ir_04_t.c ma_05_t.exh \
gb_03_t.o eu_01_t.fnm \
gb_03_t.exh cp_00_t.o \
blib cp_00_t.c
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/CN'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''EBCDIC'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/EBCDIC'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/EBCDIC/extralibs.all \
core.[0-9][0-9] EBCDIC.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml EBCDIC.x \
EBCDIC.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/EBCDIC/extralibs.ld \
blibdirs.ts EBCDIC.c \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
EBCDIC.def perl \
core.[0-9][0-9][0-9] mon.out \
libEBCDIC.def perl.exe \
perlmain.c so_locations \
EBCDIC.exp
rm -rf \
ebcdic_t.fnm ebcdic_t.h \
ebcdic_t.exh ebcdic_t.c \
EBCDIC.xs ebcdic_t.o \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/EBCDIC'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''JP'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/JP'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/JP/extralibs.all \
core.[0-9][0-9] JP.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml JP.x \
JP.bs perl \
tmon.out *.o \
JP.c pm_to_blib \
../../../lib/auto/Encode/JP/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
JP.def perl \
core.[0-9][0-9][0-9] mon.out \
libJP.def perl.exe \
perlmain.c so_locations \
JP.exp
rm -rf \
ji_02_t.c ma_05_t.o \
sh_06_t.c ji_03_t.h \
ji_03_t.c ji_03_t.exh \
cp_00_t.h ji_04_t.h \
ma_05_t.c ji_04_t.o \
cp_00_t.fnm eu_01_t.o \
sh_06_t.fnm ji_03_t.fnm \
ji_02_t.h ji_04_t.fnm \
cp_00_t.exh JP.xs \
ji_02_t.o eu_01_t.exh \
eu_01_t.c ma_05_t.h \
ji_02_t.exh ma_05_t.fnm \
sh_06_t.o ji_03_t.o \
ji_04_t.c sh_06_t.h \
eu_01_t.h ma_05_t.exh \
sh_06_t.exh ji_02_t.fnm \
eu_01_t.fnm cp_00_t.o \
ji_04_t.exh blib \
cp_00_t.c
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/JP'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''KR'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/KR'
rm -f \
*.a KR.c \
core core.[0-9] \
../../../lib/auto/Encode/KR/extralibs.all core.[0-9][0-9] \
KR.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
KR.x KR.bs \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/KR/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
KR.def perl \
core.[0-9][0-9][0-9] mon.out \
libKR.def perl.exe \
perlmain.c so_locations \
KR.exp
rm -rf \
ks_03_t.c jo_02_t.c \
cp_00_t.h ma_04_t.o \
ks_03_t.o cp_00_t.fnm \
eu_01_t.o ma_04_t.h \
jo_02_t.o ma_04_t.c \
cp_00_t.exh jo_02_t.h \
eu_01_t.exh eu_01_t.c \
ma_04_t.fnm jo_02_t.fnm \
ma_04_t.exh ks_03_t.fnm \
KR.xs jo_02_t.exh \
eu_01_t.h ks_03_t.exh \
eu_01_t.fnm cp_00_t.o \
blib cp_00_t.c \
ks_03_t.h
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/KR'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Symbol'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Symbol'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Symbol/extralibs.all \
core.[0-9][0-9] Symbol.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Symbol.x \
Symbol.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/Symbol/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl Symbol.c \
Symbol.def perl \
core.[0-9][0-9][0-9] mon.out \
libSymbol.def perl.exe \
perlmain.c so_locations \
Symbol.exp
rm -rf \
symbol_t.o symbol_t.fnm \
symbol_t.h Symbol.xs \
symbol_t.c blib \
symbol_t.exh
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Symbol'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''TW'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/TW'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/TW/extralibs.all \
core.[0-9][0-9] TW.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml TW.x \
TW.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/TW/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
TW.c *perl.core \
core.*perl.*.? Makefile.aperl \
TW.def perl \
core.[0-9][0-9][0-9] mon.out \
libTW.def perl.exe \
perlmain.c so_locations \
TW.exp
rm -rf \
TW.xs ma_03_t.fnm \
bi_01_t.fnm cp_02_t.fnm \
cp_02_t.o bi_00_t.fnm \
bi_00_t.c cp_02_t.h \
ma_03_t.h bi_01_t.h \
ma_03_t.c bi_00_t.h \
bi_00_t.o cp_02_t.c \
bi_00_t.exh bi_01_t.o \
ma_03_t.o bi_01_t.c \
ma_03_t.exh bi_01_t.exh \
blib cp_02_t.exh
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/TW'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Unicode'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Unicode'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Unicode/extralibs.all \
core.[0-9][0-9] Unicode.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Unicode.x \
Unicode.bs Unicode.c \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/Unicode/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Unicode.def perl \
core.[0-9][0-9][0-9] mon.out \
libUnicode.def perl.exe \
perlmain.c so_locations \
Unicode.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Unicode'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Encode/extralibs.all \
core.[0-9][0-9] Encode.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Encode.x \
Encode.bs perl \
tmon.out Encode.c \
*.o pm_to_blib \
../../lib/auto/Encode/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Encode.def perl \
core.[0-9][0-9][0-9] mon.out \
libEncode.def perl.exe \
perlmain.c so_locations \
Encode.exp
rm -rf \
def_t.fnm def_t.c \
def_t.exh def_t.h \
def_t.o blib
mv Makefile Makefile.old > /dev/null 2>&1
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Byte'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Byte'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Byte/extralibs.all \
core.[0-9][0-9] Byte.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Byte.x \
Byte.bs Byte.c \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/Byte/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Byte.def perl \
core.[0-9][0-9][0-9] mon.out \
libByte.def perlmain.c \
perl.exe so_locations \
Byte.exp
rm -rf \
Byte.xs byte_t.fnm \
byte_t.c byte_t.o \
byte_t.exh byte_t.h \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
Byte.o byte_t.o ../../../lib/Encode/Byte.pm \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/Byte ../../../lib/auto/Encode/Byte \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Byte'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Byte'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''CN'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/CN'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/CN/extralibs.all \
core.[0-9][0-9] CN.bso \
CN.c pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
CN.x CN.bs \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/CN/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
CN.def perl \
core.[0-9][0-9][0-9] mon.out \
libCN.def perl.exe \
perlmain.c so_locations \
CN.exp
rm -rf \
ir_04_t.exh ir_04_t.fnm \
ir_04_t.h gb_03_t.c \
ma_05_t.o cp_00_t.h \
gb_02_t.h ma_05_t.c \
cp_00_t.fnm eu_01_t.o \
gb_02_t.o gb_02_t.fnm \
cp_00_t.exh gb_02_t.c \
eu_01_t.exh ir_04_t.o \
eu_01_t.c ma_05_t.h \
gb_03_t.h ma_05_t.fnm \
gb_02_t.exh CN.xs \
eu_01_t.h gb_03_t.fnm \
ir_04_t.c ma_05_t.exh \
gb_03_t.o eu_01_t.fnm \
gb_03_t.exh cp_00_t.o \
blib cp_00_t.c
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
../../../lib/Encode/CN.pm CN.o cp_00_t.o eu_01_t.o gb_02_t.o gb_03_t.o ir_04_t.o ma_05_t.o \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/CN ../../../lib/auto/Encode/CN \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/CN'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''CN'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''EBCDIC'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/EBCDIC'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/EBCDIC/extralibs.all \
core.[0-9][0-9] EBCDIC.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml EBCDIC.x \
EBCDIC.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/EBCDIC/extralibs.ld \
blibdirs.ts EBCDIC.c \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
EBCDIC.def perl \
core.[0-9][0-9][0-9] mon.out \
libEBCDIC.def perl.exe \
perlmain.c so_locations \
EBCDIC.exp
rm -rf \
ebcdic_t.fnm ebcdic_t.h \
ebcdic_t.exh ebcdic_t.c \
EBCDIC.xs ebcdic_t.o \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
EBCDIC.o ebcdic_t.o ../../../lib/Encode/EBCDIC.pm \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/EBCDIC ../../../lib/auto/Encode/EBCDIC \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/EBCDIC'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''EBCDIC'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''JP'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/JP'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/JP/extralibs.all \
core.[0-9][0-9] JP.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml JP.x \
JP.bs perl \
tmon.out *.o \
JP.c pm_to_blib \
../../../lib/auto/Encode/JP/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
JP.def perl \
core.[0-9][0-9][0-9] mon.out \
libJP.def perl.exe \
perlmain.c so_locations \
JP.exp
rm -rf \
ji_02_t.c ma_05_t.o \
sh_06_t.c ji_03_t.h \
ji_03_t.c ji_03_t.exh \
cp_00_t.h ji_04_t.h \
ma_05_t.c ji_04_t.o \
cp_00_t.fnm eu_01_t.o \
sh_06_t.fnm ji_03_t.fnm \
ji_02_t.h ji_04_t.fnm \
cp_00_t.exh JP.xs \
ji_02_t.o eu_01_t.exh \
eu_01_t.c ma_05_t.h \
ji_02_t.exh ma_05_t.fnm \
sh_06_t.o ji_03_t.o \
ji_04_t.c sh_06_t.h \
eu_01_t.h ma_05_t.exh \
sh_06_t.exh ji_02_t.fnm \
eu_01_t.fnm cp_00_t.o \
ji_04_t.exh blib \
cp_00_t.c
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
JP.o cp_00_t.o eu_01_t.o ji_02_t.o ji_03_t.o ji_04_t.o ma_05_t.o sh_06_t.o Makefile.old \
Makefile ../../../lib/Encode/JP.pm
rm -rf \
../../../lib/auto/Encode/JP ../../../lib/auto/Encode/JP \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/JP'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''JP'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''KR'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/KR'
rm -f \
*.a KR.c \
core core.[0-9] \
../../../lib/auto/Encode/KR/extralibs.all core.[0-9][0-9] \
KR.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
KR.x KR.bs \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/KR/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
KR.def perl \
core.[0-9][0-9][0-9] mon.out \
libKR.def perl.exe \
perlmain.c so_locations \
KR.exp
rm -rf \
ks_03_t.c jo_02_t.c \
cp_00_t.h ma_04_t.o \
ks_03_t.o cp_00_t.fnm \
eu_01_t.o ma_04_t.h \
jo_02_t.o ma_04_t.c \
cp_00_t.exh jo_02_t.h \
eu_01_t.exh eu_01_t.c \
ma_04_t.fnm jo_02_t.fnm \
ma_04_t.exh ks_03_t.fnm \
KR.xs jo_02_t.exh \
eu_01_t.h ks_03_t.exh \
eu_01_t.fnm cp_00_t.o \
blib cp_00_t.c \
ks_03_t.h
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
KR.o cp_00_t.o eu_01_t.o jo_02_t.o ks_03_t.o ma_04_t.o ../../../lib/Encode/KR.pm \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/KR ../../../lib/auto/Encode/KR \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/KR'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''KR'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Symbol'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Symbol'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Symbol/extralibs.all \
core.[0-9][0-9] Symbol.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Symbol.x \
Symbol.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/Symbol/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl Symbol.c \
Symbol.def perl \
core.[0-9][0-9][0-9] mon.out \
libSymbol.def perl.exe \
perlmain.c so_locations \
Symbol.exp
rm -rf \
symbol_t.o symbol_t.fnm \
symbol_t.h Symbol.xs \
symbol_t.c blib \
symbol_t.exh
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
Symbol.o symbol_t.o ../../../lib/Encode/Symbol.pm \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/Symbol ../../../lib/auto/Encode/Symbol \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Symbol'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Symbol'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''TW'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/TW'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/TW/extralibs.all \
core.[0-9][0-9] TW.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml TW.x \
TW.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/TW/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
TW.c *perl.core \
core.*perl.*.? Makefile.aperl \
TW.def perl \
core.[0-9][0-9][0-9] mon.out \
libTW.def perl.exe \
perlmain.c so_locations \
TW.exp
rm -rf \
TW.xs ma_03_t.fnm \
bi_01_t.fnm cp_02_t.fnm \
cp_02_t.o bi_00_t.fnm \
bi_00_t.c cp_02_t.h \
ma_03_t.h bi_01_t.h \
ma_03_t.c bi_00_t.h \
bi_00_t.o cp_02_t.c \
bi_00_t.exh bi_01_t.o \
ma_03_t.o bi_01_t.c \
ma_03_t.exh bi_01_t.exh \
blib cp_02_t.exh
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
TW.o bi_00_t.o bi_01_t.o cp_02_t.o ma_03_t.o Makefile.old \
Makefile ../../../lib/Encode/TW.pm
rm -rf \
../../../lib/auto/Encode/TW ../../../lib/auto/Encode/TW \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/TW'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''TW'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Unicode'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Unicode'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Unicode/extralibs.all \
core.[0-9][0-9] Unicode.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Unicode.x \
Unicode.bs Unicode.c \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/Unicode/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Unicode.def perl \
core.[0-9][0-9][0-9] mon.out \
libUnicode.def perl.exe \
perlmain.c so_locations \
Unicode.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
Unicode.o ../../../lib/Encode/Unicode.pm \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/Unicode ../../../lib/auto/Encode/Unicode \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Unicode'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Unicode'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
rm -f \
../../lib/Encode/encode.h ../../lib/Encode/Config.pm \
Encode.o def_t.o encengine.o ../../lib/Encode/_T.e2x \
../../lib/encoding.pm Makefile.old \
../../lib/Encode/KR/2022_KR.pm ../../lib/Encode/CN/HZ.pm \
../../lib/Encode/MIME/Header/ISO_2022_JP.pm ../../lib/Encode/MIME/Header.pm \
../../lib/Encode/Makefile_PL.e2x Makefile \
../../lib/Encode/PerlIO.pod ../../lib/Encode/Supported.pod \
../../lib/Encode/CJKConstants.pm ../../lib/Encode/Encoder.pm \
../../lib/Encode/Guess.pm ../../lib/Encode/JP/JIS7.pm \
../../lib/Encode/Alias.pm ../../lib/Encode/ConfigLocal_PM.e2x \
../../lib/Encode/GSM0338.pm ../../lib/Encode/JP/H2Z.pm \
../../lib/Encode.pm ../../lib/Encode/Changes.e2x \
../../lib/Encode/_PM.e2x ../../lib/Encode/Unicode/UTF7.pm \
../../lib/Encode/Encoding.pm ../../lib/Encode/MIME/Name.pm \
../../lib/Encode/README.e2x
rm -rf \
../../lib/auto/Encode ../../lib/auto/Encode \
Encode-2.42_01
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode'
Making Fcntl (distclean)
Running Makefile.PL in ext/Fcntl
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Fcntl
Writing MYMETA.yml
Making distclean in ext/Fcntl
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Fcntl'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Fcntl/extralibs.all \
core.[0-9][0-9] Fcntl.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Fcntl.x \
Fcntl.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Fcntl/extralibs.ld \
Fcntl.c blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Fcntl.def perl \
core.[0-9][0-9][0-9] mon.out \
libFcntl.def perlmain.c \
perl.exe so_locations \
Fcntl.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Fcntl.o ../../lib/Fcntl.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Fcntl const-c.inc \
../../lib/auto/Fcntl const-xs.inc \
Fcntl-1.11
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Fcntl.pm
Not in MANIFEST: Fcntl.xs
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/autoload.t
Not in MANIFEST: t/fcntl.t
Not in MANIFEST: t/mode.t
Not in MANIFEST: t/syslfs.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Fcntl'
Making File::Glob (distclean)
Running Makefile.PL in ext/File-Glob
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for File::Glob
Writing MYMETA.yml
Making distclean in ext/File-Glob
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/File-Glob'
rm -f \
*.a core \
Glob.c core.[0-9] \
../../lib/auto/File/Glob/extralibs.all core.[0-9][0-9] \
Glob.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
Glob.x Glob.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/File/Glob/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Glob.def perl \
core.[0-9][0-9][0-9] mon.out \
libGlob.def perlmain.c \
perl.exe so_locations \
Glob.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
bsd_glob.o Glob.o ../../lib/File/Glob.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/File/Glob const-c.inc \
../../lib/auto/File/Glob const-xs.inc \
File-Glob-1.13
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bsd_glob.c
Not in MANIFEST: bsd_glob.h
Not in MANIFEST: Changes
Not in MANIFEST: Glob.pm
Not in MANIFEST: Glob.xs
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/case.t
Not in MANIFEST: t/global.t
Not in MANIFEST: t/taint.t
Not in MANIFEST: TODO
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/File-Glob'
Making Filter::Util::Call (distclean)
Creating Makefile.PL in cpan/Filter-Util-Call for Filter::Util::Call
Running Makefile.PL in cpan/Filter-Util-Call
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Filter::Util::Call
Writing MYMETA.yml
Making distclean in cpan/Filter-Util-Call
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Filter-Util-Call'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Filter/Util/Call/extralibs.all \
core.[0-9][0-9] Call.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Call.x \
Call.bs perl \
tmon.out *.o \
pm_to_blib Call.c \
../../lib/auto/Filter/Util/Call/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Call.def perl \
core.[0-9][0-9][0-9] mon.out \
libCall.def perlmain.c \
perl.exe so_locations \
Call.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Filter/Util/Call.pm Call.o \
../../lib/Filter/Util/filter-util.pl Makefile.old \
Makefile
rm -rf \
../../lib/auto/Filter/Util/Call ../../lib/auto/Filter/Util/Call \
Filter-Util-Call-1.08 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Call.pm
Not in MANIFEST: Call.xs
Not in MANIFEST: filter-util.pl
Not in MANIFEST: t/call.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Filter-Util-Call'
Making GDBM_File (distclean)
Running Makefile.PL in ext/GDBM_File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for GDBM_File
Writing MYMETA.yml
Making distclean in ext/GDBM_File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/GDBM_File'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/GDBM_File/extralibs.all \
core.[0-9][0-9] GDBM_File.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml GDBM_File.x \
GDBM_File.bs perl \
GDBM_File.c tmon.out \
*.o pm_to_blib \
../../lib/auto/GDBM_File/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
GDBM_File.def perl \
core.[0-9][0-9][0-9] mon.out \
libGDBM_File.def perlmain.c \
perl.exe so_locations \
GDBM_File.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/GDBM_File.pm GDBM_File.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/GDBM_File const-c.inc \
../../lib/auto/GDBM_File const-xs.inc \
GDBM_File-1.14
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: GDBM_File.pm
Not in MANIFEST: GDBM_File.xs
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/gdbm.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/GDBM_File'
Making Hash::Util (distclean)
Running Makefile.PL in ext/Hash-Util
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Hash::Util
Writing MYMETA.yml
Making distclean in ext/Hash-Util
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Hash-Util'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Hash/Util/extralibs.all \
core.[0-9][0-9] Util.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Util.x \
Util.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Hash/Util/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
Util.c *perl.core \
core.*perl.*.? Makefile.aperl \
Util.def perl \
core.[0-9][0-9][0-9] mon.out \
libUtil.def perlmain.c \
perl.exe so_locations \
Util.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Util.o Makefile.old \
Makefile ../../lib/Hash/Util.pm
rm -rf \
../../lib/auto/Hash/Util ../../lib/auto/Hash/Util \
Hash-Util-0.11
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Hash/Util.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/Util.t
Not in MANIFEST: Util.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Hash-Util'
Making Hash::Util::FieldHash (distclean)
Creating Makefile.PL in ext/Hash-Util-FieldHash for Hash::Util::FieldHash
Running Makefile.PL in ext/Hash-Util-FieldHash
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Hash::Util::FieldHash
Writing MYMETA.yml
Making distclean in ext/Hash-Util-FieldHash
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Hash-Util-FieldHash'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Hash/Util/FieldHash/extralibs.all \
core.[0-9][0-9] FieldHash.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml FieldHash.x \
FieldHash.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Hash/Util/FieldHash/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl FieldHash.def \
perl core.[0-9][0-9][0-9] \
mon.out libFieldHash.def \
perlmain.c perl.exe \
so_locations FieldHash.c \
FieldHash.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
FieldHash.o ../../lib/Hash/Util/FieldHash.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Hash/Util/FieldHash ../../lib/auto/Hash/Util/FieldHash \
Hash-Util-FieldHash-1.09 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: FieldHash.xs
Not in MANIFEST: lib/Hash/Util/FieldHash.pm
Not in MANIFEST: t/01_load.t
Not in MANIFEST: t/02_function.t
Not in MANIFEST: t/03_class.t
Not in MANIFEST: t/04_thread.t
Not in MANIFEST: t/05_perlhook.t
Not in MANIFEST: t/10_hash.t
Not in MANIFEST: t/11_hashassign.t
Not in MANIFEST: t/12_hashwarn.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Hash-Util-FieldHash'
Making I18N::Langinfo (distclean)
Running Makefile.PL in ext/I18N-Langinfo
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for I18N::Langinfo
Writing MYMETA.yml
Making distclean in ext/I18N-Langinfo
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/I18N-Langinfo'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/I18N/Langinfo/extralibs.all \
core.[0-9][0-9] Langinfo.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Langinfo.x \
Langinfo.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/I18N/Langinfo/extralibs.ld \
blibdirs.ts Langinfo.c \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Langinfo.def perl \
core.[0-9][0-9][0-9] mon.out \
libLanginfo.def perlmain.c \
perl.exe so_locations \
Langinfo.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/I18N/Langinfo.pm Langinfo.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/I18N/Langinfo const-c.inc \
../../lib/auto/I18N/Langinfo const-xs.inc \
I18N-Langinfo-0.08
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Langinfo.pm
Not in MANIFEST: Langinfo.xs
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/Langinfo.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/I18N-Langinfo'
Making IO (distclean)
Running Makefile.PL in dist/IO
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for IO
Writing MYMETA.yml
Making distclean in dist/IO
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/IO'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IO/extralibs.all \
core.[0-9][0-9] IO.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml IO.x \
IO.bs perl \
tmon.out *.o \
pm_to_blib IO.c \
../../lib/auto/IO/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
IO.def perl \
core.[0-9][0-9][0-9] mon.out \
libIO.def perlmain.c \
perl.exe so_locations \
IO.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IO/Dir.pm IO.o poll.o \
../../lib/IO/Seekable.pm ../../lib/IO/Socket/UNIX.pm \
../../lib/IO/Pipe.pm ../../lib/IO/Handle.pm \
../../lib/IO/Socket.pm Makefile.old \
../../lib/IO/File.pm ../../lib/IO/Socket/INET.pm \
../../lib/IO.pm ../../lib/IO/Poll.pm \
Makefile ../../lib/IO/Select.pm
rm -rf \
../../lib/auto/IO ../../lib/auto/IO \
IO-1.25_04
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: IO.pm
Not in MANIFEST: IO.xs
Not in MANIFEST: lib/IO/Dir.pm
Not in MANIFEST: lib/IO/File.pm
Not in MANIFEST: lib/IO/Handle.pm
Not in MANIFEST: lib/IO/Pipe.pm
Not in MANIFEST: lib/IO/Poll.pm
Not in MANIFEST: lib/IO/Seekable.pm
Not in MANIFEST: lib/IO/Select.pm
Not in MANIFEST: lib/IO/Socket.pm
Not in MANIFEST: lib/IO/Socket/INET.pm
Not in MANIFEST: lib/IO/Socket/UNIX.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: poll.c
Not in MANIFEST: poll.h
Not in MANIFEST: README
Not in MANIFEST: t/IO.t
Not in MANIFEST: t/io_const.t
Not in MANIFEST: t/io_dir.t
Not in MANIFEST: t/io_dup.t
Not in MANIFEST: t/io_file.t
Not in MANIFEST: t/io_file_export.t
Not in MANIFEST: t/io_linenum.t
Not in MANIFEST: t/io_multihomed.t
Not in MANIFEST: t/io_pipe.t
Not in MANIFEST: t/io_poll.t
Not in MANIFEST: t/io_sel.t
Not in MANIFEST: t/io_sock.t
Not in MANIFEST: t/io_taint.t
Not in MANIFEST: t/io_tell.t
Not in MANIFEST: t/io_udp.t
Not in MANIFEST: t/io_unix.t
Not in MANIFEST: t/io_utf8.t
Not in MANIFEST: t/io_xs.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/IO'
Making IPC::SysV (distclean)
Running Makefile.PL in cpan/IPC-SysV
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Setting license tag...
Writing Makefile for IPC::SysV
Writing MYMETA.yml
Making distclean in cpan/IPC-SysV
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IPC-SysV'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IPC/SysV/extralibs.all \
core.[0-9][0-9] SysV.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml SysV.x \
SysV.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IPC/SysV/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl SysV.def \
perl core.[0-9][0-9][0-9] \
mon.out libSysV.def \
perlmain.c SysV.c \
perl.exe so_locations \
SysV.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IPC/SysV.pm ../../lib/IPC/Semaphore.pm \
SysV.o ../../lib/IPC/SharedMem.pm \
../../lib/IPC/Msg.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/IPC/SysV const-c.inc \
../../lib/auto/IPC/SysV const-xs.inc \
IPC-SysV-2.03
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: hints/cygwin.pl
Not in MANIFEST: hints/next_3.pl
Not in MANIFEST: lib/IPC/Msg.pm
Not in MANIFEST: lib/IPC/Semaphore.pm
Not in MANIFEST: lib/IPC/SharedMem.pm
Not in MANIFEST: lib/IPC/SysV.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: MANIFEST.SKIP
Not in MANIFEST: README
Not in MANIFEST: regen.pl
Not in MANIFEST: SysV.xs
Not in MANIFEST: t/ipcsysv.t
Not in MANIFEST: t/msg.t
Not in MANIFEST: t/pod.t
Not in MANIFEST: t/podcov.t
Not in MANIFEST: t/sem.t
Not in MANIFEST: t/shm.t
Not in MANIFEST: TODO
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IPC-SysV'
Making List::Util (distclean)
Running Makefile.PL in cpan/List-Util
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for List::Util
Writing MYMETA.yml
Making distclean in cpan/List-Util
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/List-Util'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/List/Util/extralibs.all \
ListUtil.c core.[0-9][0-9] \
Util.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
Util.x Util.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/List/Util/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Util.def perl \
core.[0-9][0-9][0-9] mon.out \
libUtil.def perlmain.c \
perl.exe so_locations \
Util.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/List/Util.pm ../../lib/List/Util/XS.pm \
ListUtil.o ../../lib/Scalar/Util.pm \
../../lib/List/Util/PP.pm ../../lib/Scalar/Util/PP.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/List/Util ../../lib/auto/List/Util \
Scalar-List-Utils-1.23
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/List/Util.pm
Not in MANIFEST: lib/List/Util/PP.pm
Not in MANIFEST: lib/List/Util/XS.pm
Not in MANIFEST: lib/Scalar/Util.pm
Not in MANIFEST: lib/Scalar/Util/PP.pm
Not in MANIFEST: ListUtil.xs
Not in MANIFEST: Makefile.PL
Not in MANIFEST: multicall.h
Not in MANIFEST: README
Not in MANIFEST: t/00version.t
Not in MANIFEST: t/blessed.t
Not in MANIFEST: t/dualvar.t
Not in MANIFEST: t/expfail.t
Not in MANIFEST: t/first.t
Not in MANIFEST: t/isvstring.t
Not in MANIFEST: t/lln.t
Not in MANIFEST: t/max.t
Not in MANIFEST: t/maxstr.t
Not in MANIFEST: t/min.t
Not in MANIFEST: t/minstr.t
Not in MANIFEST: t/openhan.t
Not in MANIFEST: t/p_00version.t
Not in MANIFEST: t/p_blessed.t
Not in MANIFEST: t/p_first.t
Not in MANIFEST: t/p_lln.t
Not in MANIFEST: t/p_max.t
Not in MANIFEST: t/p_maxstr.t
Not in MANIFEST: t/p_min.t
Not in MANIFEST: t/p_minstr.t
Not in MANIFEST: t/p_openhan.t
Not in MANIFEST: t/p_readonly.t
Not in MANIFEST: t/p_reduce.t
Not in MANIFEST: t/p_refaddr.t
Not in MANIFEST: t/p_reftype.t
Not in MANIFEST: t/p_shuffle.t
Not in MANIFEST: t/p_sum.t
Not in MANIFEST: t/p_tainted.t
Not in MANIFEST: t/proto.t
Not in MANIFEST: t/readonly.t
Not in MANIFEST: t/reduce.t
Not in MANIFEST: t/refaddr.t
Not in MANIFEST: t/reftype.t
Not in MANIFEST: t/shuffle.t
Not in MANIFEST: t/stack-corruption.t
Not in MANIFEST: t/sum.t
Not in MANIFEST: t/tainted.t
Not in MANIFEST: t/weak.t
Not in MANIFEST: XS.pp
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/List-Util'
Making MIME::Base64 (distclean)
Running Makefile.PL in cpan/MIME-Base64
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for MIME::Base64
Writing MYMETA.yml
Making distclean in cpan/MIME-Base64
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/MIME-Base64'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/MIME/Base64/extralibs.all \
core.[0-9][0-9] Base64.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Base64.x \
Base64.bs perl \
tmon.out *.o \
pm_to_blib Base64.c \
../../lib/auto/MIME/Base64/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Base64.def perl \
core.[0-9][0-9][0-9] mon.out \
libBase64.def perlmain.c \
perl.exe so_locations \
Base64.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/MIME/QuotedPrint.pm Base64.o \
../../lib/MIME/Base64.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/MIME/Base64 ../../lib/auto/MIME/Base64 \
MIME-Base64-3.13
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Base64.pm
Not in MANIFEST: Base64.xs
Not in MANIFEST: Changes
Not in MANIFEST: Makefile.PL
Not in MANIFEST: QuotedPrint.pm
Not in MANIFEST: README
Not in MANIFEST: t/base64.t
Not in MANIFEST: t/length.t
Not in MANIFEST: t/quoted-print.t
Not in MANIFEST: t/unicode.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/MIME-Base64'
Making Math::BigInt::FastCalc (distclean)
Creating Makefile.PL in dist/Math-BigInt-FastCalc for Math::BigInt::FastCalc
Running Makefile.PL in dist/Math-BigInt-FastCalc
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Math::BigInt::FastCalc
Writing MYMETA.yml
Making distclean in dist/Math-BigInt-FastCalc
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt-FastCalc'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Math/BigInt/FastCalc/extralibs.all \
core.[0-9][0-9] FastCalc.bso \
pm_to_blib.ts FastCalc.c \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
FastCalc.x FastCalc.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Math/BigInt/FastCalc/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
FastCalc.def perl \
core.[0-9][0-9][0-9] mon.out \
libFastCalc.def perlmain.c \
perl.exe so_locations \
FastCalc.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Math/BigInt/FastCalc.pm FastCalc.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Math/BigInt/FastCalc ../../lib/auto/Math/BigInt/FastCalc \
Math-BigInt-FastCalc-0.28 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: FastCalc.xs
Not in MANIFEST: lib/Math/BigInt/FastCalc.pm
Not in MANIFEST: t/bigintfc.t
Not in MANIFEST: t/bootstrap.t
Not in MANIFEST: t/leak.t
Not in MANIFEST: t/mbi_rand.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt-FastCalc'
Making NDBM_File (distclean)
Running Makefile.PL in ext/NDBM_File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Writing Makefile for NDBM_File
Writing MYMETA.yml
Making distclean in ext/NDBM_File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/NDBM_File'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/NDBM_File/extralibs.all \
NDBM_File.c core.[0-9][0-9] \
NDBM_File.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
NDBM_File.x NDBM_File.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/NDBM_File/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
NDBM_File.def perl \
core.[0-9][0-9][0-9] mon.out \
libNDBM_File.def perlmain.c \
perl.exe so_locations \
NDBM_File.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/NDBM_File.pm NDBM_File.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/NDBM_File ../../lib/auto/NDBM_File \
NDBM_File-1.12
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/cygwin.pl
Not in MANIFEST: hints/dec_osf.pl
Not in MANIFEST: hints/dynixptx.pl
Not in MANIFEST: hints/gnu.pl
Not in MANIFEST: hints/gnukfreebsd.pl
Not in MANIFEST: hints/gnuknetbsd.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: hints/solaris.pl
Not in MANIFEST: hints/svr4.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: NDBM_File.pm
Not in MANIFEST: NDBM_File.xs
Not in MANIFEST: t/ndbm.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/NDBM_File'
Making ODBM_File (distclean)
Running Makefile.PL in ext/ODBM_File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Writing Makefile for ODBM_File
Writing MYMETA.yml
Making distclean in ext/ODBM_File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/ODBM_File'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ODBM_File/extralibs.all \
core.[0-9][0-9] ODBM_File.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml ODBM_File.x \
ODBM_File.bs perl \
tmon.out *.o \
ODBM_File.c pm_to_blib \
../../lib/auto/ODBM_File/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
ODBM_File.def perl \
core.[0-9][0-9][0-9] mon.out \
libODBM_File.def perlmain.c \
perl.exe so_locations \
ODBM_File.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ODBM_File.pm ODBM_File.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/ODBM_File ../../lib/auto/ODBM_File \
ODBM_File-1.10
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/cygwin.pl
Not in MANIFEST: hints/dec_osf.pl
Not in MANIFEST: hints/gnu.pl
Not in MANIFEST: hints/gnukfreebsd.pl
Not in MANIFEST: hints/gnuknetbsd.pl
Not in MANIFEST: hints/hpux.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: hints/solaris.pl
Not in MANIFEST: hints/svr4.pl
Not in MANIFEST: hints/ultrix.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: ODBM_File.pm
Not in MANIFEST: ODBM_File.xs
Not in MANIFEST: t/odbm.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/ODBM_File'
Making Opcode (distclean)
Creating Makefile.PL in ext/Opcode for Opcode
Running Makefile.PL in ext/Opcode
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Opcode
Writing MYMETA.yml
Making distclean in ext/Opcode
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Opcode'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Opcode/extralibs.all \
Opcode.c core.[0-9][0-9] \
Opcode.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
Opcode.x Opcode.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Opcode/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Opcode.def perl \
core.[0-9][0-9][0-9] mon.out \
libOpcode.def perlmain.c \
perl.exe so_locations \
Opcode.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Opcode.pm ../../lib/ops.pm \
Opcode.o Makefile.old \
Makefile
rm -rf \
../../lib/auto/Opcode ../../lib/auto/Opcode \
Opcode-1.18 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Opcode.pm
Not in MANIFEST: Opcode.xs
Not in MANIFEST: ops.pm
Not in MANIFEST: t/Opcode.t
Not in MANIFEST: t/ops.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Opcode'
Making POSIX (distclean)
Running Makefile.PL in ext/POSIX
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Note (probably harmless): No library found for -lposix
Note (probably harmless): No library found for -lcposix
Writing Makefile for POSIX
Writing MYMETA.yml
Making distclean in ext/POSIX
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/POSIX'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/POSIX/extralibs.all \
core.[0-9][0-9] POSIX.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml POSIX.x \
POSIX.bs perl \
tmon.out *.o \
pm_to_blib POSIX.c \
../../lib/auto/POSIX/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
POSIX.def perl \
core.[0-9][0-9][0-9] mon.out \
libPOSIX.def perlmain.c \
perl.exe so_locations \
POSIX.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/POSIX.pod POSIX.o \
Makefile.old Makefile \
../../lib/POSIX.pm
rm -rf \
../../lib/auto/POSIX const-c.inc \
../../lib/auto/POSIX const-xs.inc \
POSIX-1.24
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/bsdos.pl
Not in MANIFEST: hints/dynixptx.pl
Not in MANIFEST: hints/freebsd.pl
Not in MANIFEST: hints/gnukfreebsd.pl
Not in MANIFEST: hints/gnuknetbsd.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: hints/mint.pl
Not in MANIFEST: hints/netbsd.pl
Not in MANIFEST: hints/next_3.pl
Not in MANIFEST: hints/openbsd.pl
Not in MANIFEST: hints/sunos_4.pl
Not in MANIFEST: hints/svr4.pl
Not in MANIFEST: hints/uts.pl
Not in MANIFEST: lib/POSIX.pm
Not in MANIFEST: lib/POSIX.pod
Not in MANIFEST: Makefile.PL
Not in MANIFEST: POSIX.xs
Not in MANIFEST: t/is.t
Not in MANIFEST: t/math.t
Not in MANIFEST: t/posix.t
Not in MANIFEST: t/sigaction.t
Not in MANIFEST: t/sysconf.t
Not in MANIFEST: t/taint.t
Not in MANIFEST: t/termios.t
Not in MANIFEST: t/time.t
Not in MANIFEST: t/waitpid.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/POSIX'
Making PerlIO::encoding (distclean)
Creating Makefile.PL in ext/PerlIO-encoding for PerlIO::encoding
Running Makefile.PL in ext/PerlIO-encoding
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for PerlIO::encoding
Writing MYMETA.yml
Making distclean in ext/PerlIO-encoding
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-encoding'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/PerlIO/encoding/extralibs.all \
core.[0-9][0-9] encoding.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml encoding.x \
encoding.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/PerlIO/encoding/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
encoding.c Makefile.aperl \
encoding.def perl \
core.[0-9][0-9][0-9] mon.out \
libencoding.def perlmain.c \
perl.exe so_locations \
encoding.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
encoding.o ../../lib/PerlIO/encoding.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/PerlIO/encoding ../../lib/auto/PerlIO/encoding \
PerlIO-encoding-0.14 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
No such file: Makefile.PL
Not in MANIFEST: t/encoding.t
Not in MANIFEST: t/fallback.t
Not in MANIFEST: t/nolooping.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-encoding'
Making PerlIO::scalar (distclean)
Creating Makefile.PL in ext/PerlIO-scalar for PerlIO::scalar
Running Makefile.PL in ext/PerlIO-scalar
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for PerlIO::scalar
Writing MYMETA.yml
Making distclean in ext/PerlIO-scalar
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-scalar'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/PerlIO/scalar/extralibs.all \
core.[0-9][0-9] scalar.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml scalar.x \
scalar.bs perl \
scalar.c tmon.out \
*.o pm_to_blib \
../../lib/auto/PerlIO/scalar/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
scalar.def perl \
core.[0-9][0-9][0-9] mon.out \
libscalar.def perlmain.c \
perl.exe so_locations \
scalar.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
scalar.o ../../lib/PerlIO/scalar.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/PerlIO/scalar ../../lib/auto/PerlIO/scalar \
PerlIO-scalar-0.11_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: scalar.pm
Not in MANIFEST: scalar.xs
Not in MANIFEST: t/scalar.t
Not in MANIFEST: t/scalar_ungetc.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-scalar'
Making PerlIO::via (distclean)
Creating Makefile.PL in ext/PerlIO-via for PerlIO::via
Running Makefile.PL in ext/PerlIO-via
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for PerlIO::via
Writing MYMETA.yml
Making distclean in ext/PerlIO-via
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-via'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/PerlIO/via/extralibs.all \
core.[0-9][0-9] via.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml via.x \
via.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/PerlIO/via/extralibs.ld \
via.c blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
via.def perl \
core.[0-9][0-9][0-9] mon.out \
libvia.def perlmain.c \
perl.exe so_locations \
via.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/PerlIO/via.pm via.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/PerlIO/via ../../lib/auto/PerlIO/via \
PerlIO-via-0.11 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/aix.pl
Not in MANIFEST: t/via.t
Not in MANIFEST: via.pm
Not in MANIFEST: via.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-via'
Making SDBM_File (distclean)
Running Makefile.PL in ext/SDBM_File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for sdbm
Writing MYMETA.yml
Writing Makefile for SDBM_File
Writing MYMETA.yml
Making distclean in ext/SDBM_File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File'
/tmp/buildd/perl-5.14.2/ext/SDBM_File/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''sdbm'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File/sdbm'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/sdbm/extralibs.all \
core.[0-9][0-9] sdbm.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml sdbm.x \
sdbm.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/sdbm/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
sdbm.def core.[0-9][0-9][0-9] \
mon.out libsdbm.def \
perlmain.c perl.exe \
so_locations sdbm.exp
rm -rf \
dbe dbu \
*.dir dba \
*.pag libsdbm.a \
blib dbd \
x-dbu
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File/sdbm'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/SDBM_File/extralibs.all \
core.[0-9][0-9] SDBM_File.bso \
pm_to_blib.ts SDBM_File.c \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
SDBM_File.x SDBM_File.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/SDBM_File/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
SDBM_File.def perl \
core.[0-9][0-9][0-9] mon.out \
libSDBM_File.def perl.exe \
perlmain.c so_locations \
SDBM_File.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
/tmp/buildd/perl-5.14.2/ext/SDBM_File/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''sdbm'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File/sdbm'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/sdbm/extralibs.all \
core.[0-9][0-9] sdbm.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml sdbm.x \
sdbm.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/sdbm/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
sdbm.def core.[0-9][0-9][0-9] \
mon.out libsdbm.def \
perlmain.c perl.exe \
so_locations sdbm.exp
rm -rf \
dbe dbu \
*.dir dba \
*.pag libsdbm.a \
blib dbd \
x-dbu
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
sdbm.o pair.o hash.o Makefile.old \
Makefile
rm -rf \
../../../lib/auto/sdbm ../../../lib/auto/sdbm \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File/sdbm'
/tmp/buildd/perl-5.14.2/ext/SDBM_File/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''sdbm'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
rm -f \
../../lib/SDBM_File.pm SDBM_File.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/SDBM_File ../../lib/auto/SDBM_File \
SDBM_File-1.09
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Makefile.PL
Not in MANIFEST: sdbm/biblio
Not in MANIFEST: sdbm/CHANGES
Not in MANIFEST: sdbm/COMPARE
Not in MANIFEST: sdbm/dba.c
Not in MANIFEST: sdbm/dbd.c
Not in MANIFEST: sdbm/dbe.1
Not in MANIFEST: sdbm/dbe.c
Not in MANIFEST: sdbm/dbu.c
Not in MANIFEST: sdbm/grind
Not in MANIFEST: sdbm/hash.c
Not in MANIFEST: sdbm/linux.patches
Not in MANIFEST: sdbm/Makefile.PL
Not in MANIFEST: sdbm/makefile.sdbm
Not in MANIFEST: sdbm/pair.c
Not in MANIFEST: sdbm/pair.h
Not in MANIFEST: sdbm/README
Not in MANIFEST: sdbm/readme.ms
Not in MANIFEST: sdbm/README.too
Not in MANIFEST: sdbm/sdbm.3
Not in MANIFEST: sdbm/sdbm.c
Not in MANIFEST: sdbm/sdbm.h
Not in MANIFEST: sdbm/tune.h
Not in MANIFEST: sdbm/util.c
Not in MANIFEST: SDBM_File.pm
Not in MANIFEST: SDBM_File.xs
Not in MANIFEST: t/sdbm.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File'
Making Socket (distclean)
Running Makefile.PL in ext/Socket
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Socket
Writing MYMETA.yml
Making distclean in ext/Socket
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Socket'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Socket/extralibs.all \
core.[0-9][0-9] Socket.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Socket.x \
Socket.bs perl \
tmon.out *.o \
pm_to_blib Socket.c \
../../lib/auto/Socket/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Socket.def perl \
core.[0-9][0-9][0-9] mon.out \
libSocket.def perlmain.c \
perl.exe so_locations \
Socket.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Socket.o ../../lib/Socket.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Socket const-c.inc \
../../lib/auto/Socket const-xs.inc \
Socket-1.94
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Makefile.PL
Not in MANIFEST: Socket.pm
Not in MANIFEST: Socket.xs
Not in MANIFEST: t/getaddrinfo.t
Not in MANIFEST: t/getnameinfo.t
Not in MANIFEST: t/Socket.t
Not in MANIFEST: t/socketpair.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Socket'
Making Storable (distclean)
Running Makefile.PL in dist/Storable
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Writing Makefile for Storable
Writing MYMETA.yml
You appear to have a perl configured to use 64 bit integers in its scalar
variables. If you have existing data written with an earlier version of
Storable which this version of Storable refuses to load with a
Byte order is not compatible
error, then please read the section "64 bit data in perl 5.6.0 and 5.6.1"
in the Storable documentation for instructions on how to read your data.
(You can find the documentation at the end of Storable.pm in POD format)
Making distclean in dist/Storable
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Storable'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Storable/extralibs.all \
core.[0-9][0-9] Storable.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Storable.x \
Storable.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Storable/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
Storable.c *perl.core \
core.*perl.*.? Makefile.aperl \
Storable.def perl \
core.[0-9][0-9][0-9] mon.out \
libStorable.def perlmain.c \
perl.exe so_locations \
Storable.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Storable.o ../../lib/Storable.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Storable ../../lib/auto/Storable \
Storable-2.27
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: hints/gnukfreebsd.pl
Not in MANIFEST: hints/gnuknetbsd.pl
Not in MANIFEST: hints/hpux.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: README
Not in MANIFEST: Storable.pm
Not in MANIFEST: Storable.xs
Not in MANIFEST: t/attach_errors.t
Not in MANIFEST: t/attach_singleton.t
Not in MANIFEST: t/blessed.t
Not in MANIFEST: t/canonical.t
Not in MANIFEST: t/circular_hook.t
Not in MANIFEST: t/code.t
Not in MANIFEST: t/compat01.t
Not in MANIFEST: t/compat06.t
Not in MANIFEST: t/croak.t
Not in MANIFEST: t/dclone.t
Not in MANIFEST: t/downgrade.t
Not in MANIFEST: t/file_magic.t
Not in MANIFEST: t/forgive.t
Not in MANIFEST: t/freeze.t
Not in MANIFEST: t/HAS_ATTACH.pm
Not in MANIFEST: t/HAS_HOOK.pm
Not in MANIFEST: t/HAS_OVERLOAD.pm
Not in MANIFEST: t/integer.t
Not in MANIFEST: t/interwork56.t
Not in MANIFEST: t/just_plain_nasty.t
Not in MANIFEST: t/lock.t
Not in MANIFEST: t/make_56_interwork.pl
Not in MANIFEST: t/make_downgrade.pl
Not in MANIFEST: t/make_overload.pl
Not in MANIFEST: t/malice.t
Not in MANIFEST: t/overload.t
Not in MANIFEST: t/recurse.t
Not in MANIFEST: t/restrict.t
Not in MANIFEST: t/retrieve.t
Not in MANIFEST: t/sig_die.t
Not in MANIFEST: t/st-dump.pl
Not in MANIFEST: t/store.t
Not in MANIFEST: t/testlib.pl
Not in MANIFEST: t/threads.t
Not in MANIFEST: t/tied.t
Not in MANIFEST: t/tied_hook.t
Not in MANIFEST: t/tied_items.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: t/utf8hash.t
Not in MANIFEST: t/weak.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Storable'
Making Sys::Hostname (distclean)
Creating Makefile.PL in ext/Sys-Hostname for Sys::Hostname
Running Makefile.PL in ext/Sys-Hostname
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Sys::Hostname
Writing MYMETA.yml
Making distclean in ext/Sys-Hostname
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Sys-Hostname'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Sys/Hostname/extralibs.all \
core.[0-9][0-9] Hostname.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Hostname.x \
Hostname.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Sys/Hostname/extralibs.ld \
blibdirs.ts Hostname.c \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Hostname.def perl \
core.[0-9][0-9][0-9] mon.out \
libHostname.def perlmain.c \
perl.exe so_locations \
Hostname.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Hostname.o ../../lib/Sys/Hostname.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Sys/Hostname ../../lib/auto/Sys/Hostname \
Sys-Hostname-1.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Hostname.pm
Not in MANIFEST: Hostname.xs
Not in MANIFEST: t/Hostname.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Sys-Hostname'
Making Sys::Syslog (distclean)
Running Makefile.PL in cpan/Sys-Syslog
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Sys::Syslog
Writing MYMETA.yml
Making distclean in cpan/Sys-Syslog
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Sys-Syslog'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Sys/Syslog/extralibs.all \
core.[0-9][0-9] Syslog.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Syslog.x \
Syslog.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Sys/Syslog/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl Syslog.def \
perl core.[0-9][0-9][0-9] \
mon.out libSyslog.def \
perlmain.c perl.exe \
Syslog.c so_locations \
Syslog.exp
rm -rf \
Sys-Syslog-* blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Syslog.o ../../lib/Sys/Syslog.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Sys/Syslog *.bin \
*.rc const-c.inc \
*.bak macros.all \
const-xs.inc win32/PerlLog_dll \
PerlLog.h typemap \
../../lib/auto/Sys/Syslog lib \
Sys-Syslog-0.27
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: fallback/const-c.inc
Not in MANIFEST: fallback/const-xs.inc
Not in MANIFEST: fallback/syslog.h
Not in MANIFEST: Makefile.PL
Not in MANIFEST: README
Not in MANIFEST: README.win32
Not in MANIFEST: Syslog.pm
Not in MANIFEST: Syslog.xs
Not in MANIFEST: t/00-load.t
Not in MANIFEST: t/constants.t
Not in MANIFEST: t/syslog.t
Not in MANIFEST: win32/compile.pl
Not in MANIFEST: win32/PerlLog.mc
Not in MANIFEST: win32/PerlLog_dll.uu
Not in MANIFEST: win32/PerlLog_RES.uu
Not in MANIFEST: win32/Win32.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Sys-Syslog'
Making Text::Soundex (distclean)
Creating Makefile.PL in cpan/Text-Soundex for Text::Soundex
Running Makefile.PL in cpan/Text-Soundex
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Text::Soundex
Writing MYMETA.yml
Making distclean in cpan/Text-Soundex
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Soundex'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Text/Soundex/extralibs.all \
core.[0-9][0-9] Soundex.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Soundex.x \
Soundex.bs perl \
Soundex.c tmon.out \
*.o pm_to_blib \
../../lib/auto/Text/Soundex/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Soundex.def perl \
core.[0-9][0-9][0-9] mon.out \
libSoundex.def perlmain.c \
perl.exe so_locations \
Soundex.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Soundex.o ../../lib/Text/Soundex.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Text/Soundex ../../lib/auto/Text/Soundex \
Text-Soundex-3.03_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: README
Not in MANIFEST: Soundex.pm
Not in MANIFEST: Soundex.xs
Not in MANIFEST: t/Soundex.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Soundex'
Making Tie::Hash::NamedCapture (distclean)
Creating Makefile.PL in ext/Tie-Hash-NamedCapture for Tie::Hash::NamedCapture
Running Makefile.PL in ext/Tie-Hash-NamedCapture
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Tie::Hash::NamedCapture
Writing MYMETA.yml
Making distclean in ext/Tie-Hash-NamedCapture
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Tie-Hash-NamedCapture'
rm -f \
*.a NamedCapture.c \
core core.[0-9] \
../../lib/auto/Tie/Hash/NamedCapture/extralibs.all core.[0-9][0-9] \
NamedCapture.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
NamedCapture.x NamedCapture.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Tie/Hash/NamedCapture/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
NamedCapture.def perl \
core.[0-9][0-9][0-9] mon.out \
libNamedCapture.def perlmain.c \
perl.exe so_locations \
NamedCapture.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
NamedCapture.o Makefile.old \
Makefile ../../lib/Tie/Hash/NamedCapture.pm
rm -rf \
../../lib/auto/Tie/Hash/NamedCapture ../../lib/auto/Tie/Hash/NamedCapture \
Tie-Hash-NamedCapture-0.08 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: NamedCapture.pm
Not in MANIFEST: NamedCapture.xs
Not in MANIFEST: t/tiehash.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Tie-Hash-NamedCapture'
Making Time::HiRes (distclean)
Running Makefile.PL in cpan/Time-HiRes
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Configuring Time::HiRes...
Using hints hints/linux.pl...
Extra libraries: -lrt...
Have syscall()... looking for syscall.h... found <syscall.h>.
Looking for gettimeofday()... found.
Looking for setitimer()... found.
Looking for getitimer()... found.
You have interval timers (both setitimer and getitimer).
Looking for ualarm()... NOT found.
But you have setitimer().
We can make a Time::HiRes::ualarm().
Looking for usleep()... found.
Looking for nanosleep()... testing... found.
You can mix subsecond sleeps with signals, if you want to.
(It's still not portable, though.)
Looking for clock_gettime()... found.
Looking for clock_getres()... found.
Looking for clock_nanosleep()... found.
Looking for clock()... found.
Looking for stat() subsecond timestamps...
Trying struct stat st_atimespec.tv_nsec...NOT found.
Trying struct stat st_atimensec...NOT found.
Trying struct stat st_atime_n...NOT found.
Trying struct stat st_atim.tv_nsec...found.
Trying struct stat st_uatime...Processing hints file hints/linux.pl
NOT found.
You seem to have stat() subsecond timestamps.
(Your struct stat has them, but the filesystems must help.)
Writing Makefile for Time::HiRes
Writing MYMETA.yml
Making distclean in cpan/Time-HiRes
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Time-HiRes'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Time/HiRes/extralibs.all \
core.[0-9][0-9] HiRes.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml HiRes.x \
HiRes.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Time/HiRes/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl HiRes.def \
perl core.[0-9][0-9][0-9] \
mon.out libHiRes.def \
perlmain.c perl.exe \
so_locations HiRes.exp \
HiRes.c
rm -rf \
xdefine blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
HiRes.o ../../lib/Time/HiRes.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Time/HiRes const-c.inc \
../../lib/auto/Time/HiRes const-xs.inc \
Time-HiRes-1.9721_01
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: fallback/const-c.inc
Not in MANIFEST: fallback/const-xs.inc
Not in MANIFEST: hints/aix.pl
Not in MANIFEST: hints/dec_osf.pl
Not in MANIFEST: hints/dynixptx.pl
Not in MANIFEST: hints/irix.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: hints/solaris.pl
Not in MANIFEST: hints/svr4.pl
Not in MANIFEST: HiRes.pm
Not in MANIFEST: HiRes.xs
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/HiRes.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Time-HiRes'
Making Time::Piece (distclean)
Running Makefile.PL in cpan/Time-Piece
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Time::Piece
Writing MYMETA.yml
Making distclean in cpan/Time-Piece
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Time-Piece'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Time/Piece/extralibs.all \
core.[0-9][0-9] Piece.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Piece.x \
Piece.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Time/Piece/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
Piece.c *perl.core \
core.*perl.*.? Makefile.aperl \
Piece.def perl \
core.[0-9][0-9][0-9] mon.out \
libPiece.def perlmain.c \
perl.exe so_locations \
Piece.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Time/Seconds.pm Piece.o \
../../lib/Time/Piece.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Time/Piece ../../lib/auto/Time/Piece \
Time-Piece-1.20_01
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Makefile.PL
Not in MANIFEST: Piece.pm
Not in MANIFEST: Piece.xs
Not in MANIFEST: README
Not in MANIFEST: Seconds.pm
Not in MANIFEST: t/01base.t
Not in MANIFEST: t/02core.t
Not in MANIFEST: t/03compare.t
Not in MANIFEST: t/04mjd.t
Not in MANIFEST: t/05overload.t
Not in MANIFEST: t/06subclass.t
Not in MANIFEST: t/07arith.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Time-Piece'
Making Unicode::Collate (distclean)
Running Makefile.PL in cpan/Unicode-Collate
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Making header files for XS...
Writing Makefile for Unicode::Collate
Writing MYMETA.yml
Making distclean in cpan/Unicode-Collate
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Unicode-Collate'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Unicode/Collate/extralibs.all \
core.[0-9][0-9] Collate.bso \
Collate.c pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
Collate.x Collate.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Unicode/Collate/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Collate.def perl \
core.[0-9][0-9][0-9] mon.out \
libCollate.def perlmain.c \
perl.exe so_locations \
Collate.exp
rm -rf \
ucatbl.h blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Unicode/Collate/Locale/yo.pl ../../lib/Unicode/Collate/Locale/ca.pl \
../../lib/Unicode/Collate/Locale/zh_big5.pl ../../lib/Unicode/Collate/Locale/fo.pl \
../../lib/Unicode/Collate/Locale/lt.pl ../../lib/Unicode/Collate/allkeys.txt \
../../lib/Unicode/Collate/Locale/az.pl ../../lib/Unicode/Collate/Locale/fi.pl \
../../lib/Unicode/Collate/Locale/se.pl ../../lib/Unicode/Collate/Locale/zh_pin.pl \
../../lib/Unicode/Collate/Locale/sv.pl ../../lib/Unicode/Collate/Locale/tr.pl \
../../lib/Unicode/Collate/Locale/uk.pl ../../lib/Unicode/Collate/Locale/eo.pl \
../../lib/Unicode/Collate/CJK/JISX0208.pm ../../lib/Unicode/Collate/Locale/is.pl \
../../lib/Unicode/Collate/Locale/om.pl ../../lib/Unicode/Collate/Locale/ja.pl \
../../lib/Unicode/Collate/Locale/ig.pl ../../lib/Unicode/Collate/Locale/sw.pl \
../../lib/Unicode/Collate/Locale/vi.pl ../../lib/Unicode/Collate/Locale/es.pl \
../../lib/Unicode/Collate/Locale/sl.pl ../../lib/Unicode/Collate/CJK/GB2312.pm \
../../lib/Unicode/Collate/Locale/zh.pl Makefile.old \
../../lib/Unicode/Collate/Locale/es_trad.pl ../../lib/Unicode/Collate/keys.txt \
../../lib/Unicode/Collate/Locale/hr.pl ../../lib/Unicode/Collate/Locale/hy.pl \
../../lib/Unicode/Collate/CJK/Korean.pm ../../lib/Unicode/Collate/Locale/to.pl \
../../lib/Unicode/Collate/CJK/Pinyin.pm ../../lib/Unicode/Collate/Locale/sq.pl \
../../lib/Unicode/Collate/Locale/cy.pl ../../lib/Unicode/Collate.pm \
../../lib/Unicode/Collate/Locale/af.pl ../../lib/Unicode/Collate/Locale/sk.pl \
Collate.o ../../lib/Unicode/Collate/Locale/kl.pl \
../../lib/Unicode/Collate/Locale/ar.pl ../../lib/Unicode/Collate/Locale/hu.pl \
../../lib/Unicode/Collate/CJK/Stroke.pm Makefile \
../../lib/Unicode/Collate/Locale/da.pl ../../lib/Unicode/Collate/Locale/haw.pl \
../../lib/Unicode/Collate/Locale/nn.pl ../../lib/Unicode/Collate/Locale/ro.pl \
../../lib/Unicode/Collate/Locale/lv.pl ../../lib/Unicode/Collate/Locale/nso.pl \
../../lib/Unicode/Collate/Locale.pm ../../lib/Unicode/Collate/Locale/pl.pl \
../../lib/Unicode/Collate/Locale/kk.pl ../../lib/Unicode/Collate/Locale/cs.pl \
../../lib/Unicode/Collate/CJK/Big5.pm ../../lib/Unicode/Collate/Locale/ru.pl \
../../lib/Unicode/Collate/Locale/fil.pl ../../lib/Unicode/Collate/Locale/zh_gb.pl \
../../lib/Unicode/Collate/Locale/fr.pl ../../lib/Unicode/Collate/Locale/ko.pl \
../../lib/Unicode/Collate/Locale/de_phone.pl ../../lib/Unicode/Collate/Locale/ha.pl \
../../lib/Unicode/Collate/Locale/et.pl ../../lib/Unicode/Collate/Locale/mt.pl \
../../lib/Unicode/Collate/Locale/nb.pl ../../lib/Unicode/Collate/Locale/zh_strk.pl
rm -f \
../../lib/Unicode/Collate/Locale/wo.pl ../../lib/Unicode/Collate/Locale/tn.pl
rm -rf \
../../lib/auto/Unicode/Collate ../../lib/auto/Unicode/Collate \
Unicode-Collate-0.73
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Collate.pm
Not in MANIFEST: Collate.xs
Not in MANIFEST: Collate/allkeys.txt
Not in MANIFEST: Collate/CJK/Big5.pm
Not in MANIFEST: Collate/CJK/GB2312.pm
Not in MANIFEST: Collate/CJK/JISX0208.pm
Not in MANIFEST: Collate/CJK/Korean.pm
Not in MANIFEST: Collate/CJK/Pinyin.pm
Not in MANIFEST: Collate/CJK/Stroke.pm
Not in MANIFEST: Collate/keys.txt
Not in MANIFEST: Collate/Locale.pm
Not in MANIFEST: Collate/Locale/af.pl
Not in MANIFEST: Collate/Locale/ar.pl
Not in MANIFEST: Collate/Locale/az.pl
Not in MANIFEST: Collate/Locale/ca.pl
Not in MANIFEST: Collate/Locale/cs.pl
Not in MANIFEST: Collate/Locale/cy.pl
Not in MANIFEST: Collate/Locale/da.pl
Not in MANIFEST: Collate/Locale/de_phone.pl
Not in MANIFEST: Collate/Locale/eo.pl
Not in MANIFEST: Collate/Locale/es.pl
Not in MANIFEST: Collate/Locale/es_trad.pl
Not in MANIFEST: Collate/Locale/et.pl
Not in MANIFEST: Collate/Locale/fi.pl
Not in MANIFEST: Collate/Locale/fil.pl
Not in MANIFEST: Collate/Locale/fo.pl
Not in MANIFEST: Collate/Locale/fr.pl
Not in MANIFEST: Collate/Locale/ha.pl
Not in MANIFEST: Collate/Locale/haw.pl
Not in MANIFEST: Collate/Locale/hr.pl
Not in MANIFEST: Collate/Locale/hu.pl
Not in MANIFEST: Collate/Locale/hy.pl
Not in MANIFEST: Collate/Locale/ig.pl
Not in MANIFEST: Collate/Locale/is.pl
Not in MANIFEST: Collate/Locale/ja.pl
Not in MANIFEST: Collate/Locale/kk.pl
Not in MANIFEST: Collate/Locale/kl.pl
Not in MANIFEST: Collate/Locale/ko.pl
Not in MANIFEST: Collate/Locale/lt.pl
Not in MANIFEST: Collate/Locale/lv.pl
Not in MANIFEST: Collate/Locale/mt.pl
Not in MANIFEST: Collate/Locale/nb.pl
Not in MANIFEST: Collate/Locale/nn.pl
Not in MANIFEST: Collate/Locale/nso.pl
Not in MANIFEST: Collate/Locale/om.pl
Not in MANIFEST: Collate/Locale/pl.pl
Not in MANIFEST: Collate/Locale/ro.pl
Not in MANIFEST: Collate/Locale/ru.pl
Not in MANIFEST: Collate/Locale/se.pl
Not in MANIFEST: Collate/Locale/sk.pl
Not in MANIFEST: Collate/Locale/sl.pl
Not in MANIFEST: Collate/Locale/sq.pl
Not in MANIFEST: Collate/Locale/sv.pl
Not in MANIFEST: Collate/Locale/sw.pl
Not in MANIFEST: Collate/Locale/tn.pl
Not in MANIFEST: Collate/Locale/to.pl
Not in MANIFEST: Collate/Locale/tr.pl
Not in MANIFEST: Collate/Locale/uk.pl
Not in MANIFEST: Collate/Locale/vi.pl
Not in MANIFEST: Collate/Locale/wo.pl
Not in MANIFEST: Collate/Locale/yo.pl
Not in MANIFEST: Collate/Locale/zh.pl
Not in MANIFEST: Collate/Locale/zh_big5.pl
Not in MANIFEST: Collate/Locale/zh_gb.pl
Not in MANIFEST: Collate/Locale/zh_pin.pl
Not in MANIFEST: Collate/Locale/zh_strk.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: mkheader
Not in MANIFEST: README
Not in MANIFEST: t/altern.t
Not in MANIFEST: t/backwds.t
Not in MANIFEST: t/cjk_b5.t
Not in MANIFEST: t/cjk_gb.t
Not in MANIFEST: t/cjk_ja.t
Not in MANIFEST: t/cjk_ko.t
Not in MANIFEST: t/cjk_py.t
Not in MANIFEST: t/cjk_st.t
Not in MANIFEST: t/cjkrange.t
Not in MANIFEST: t/compatui.t
Not in MANIFEST: t/contract.t
Not in MANIFEST: t/default.t
Not in MANIFEST: t/hangtype.t
Not in MANIFEST: t/hangul.t
Not in MANIFEST: t/ignor.t
Not in MANIFEST: t/illegal.t
Not in MANIFEST: t/illegalp.t
Not in MANIFEST: t/index.t
Not in MANIFEST: t/loc_af.t
Not in MANIFEST: t/loc_ar.t
Not in MANIFEST: t/loc_az.t
Not in MANIFEST: t/loc_be.t
Not in MANIFEST: t/loc_bg.t
Not in MANIFEST: t/loc_ca.t
Not in MANIFEST: t/loc_cs.t
Not in MANIFEST: t/loc_cy.t
Not in MANIFEST: t/loc_cyrl.t
Not in MANIFEST: t/loc_da.t
Not in MANIFEST: t/loc_de.t
Not in MANIFEST: t/loc_deph.t
Not in MANIFEST: t/loc_eo.t
Not in MANIFEST: t/loc_es.t
Not in MANIFEST: t/loc_estr.t
Not in MANIFEST: t/loc_et.t
Not in MANIFEST: t/loc_fi.t
Not in MANIFEST: t/loc_fil.t
Not in MANIFEST: t/loc_fo.t
Not in MANIFEST: t/loc_fr.t
Not in MANIFEST: t/loc_ha.t
Not in MANIFEST: t/loc_haw.t
Not in MANIFEST: t/loc_hr.t
Not in MANIFEST: t/loc_hu.t
Not in MANIFEST: t/loc_hy.t
Not in MANIFEST: t/loc_ig.t
Not in MANIFEST: t/loc_is.t
Not in MANIFEST: t/loc_ja.t
Not in MANIFEST: t/loc_jait.t
Not in MANIFEST: t/loc_japr.t
Not in MANIFEST: t/loc_kk.t
Not in MANIFEST: t/loc_kl.t
Not in MANIFEST: t/loc_ko.t
Not in MANIFEST: t/loc_lt.t
Not in MANIFEST: t/loc_lv.t
Not in MANIFEST: t/loc_mk.t
Not in MANIFEST: t/loc_mt.t
Not in MANIFEST: t/loc_nb.t
Not in MANIFEST: t/loc_nn.t
Not in MANIFEST: t/loc_nso.t
Not in MANIFEST: t/loc_om.t
Not in MANIFEST: t/loc_pl.t
Not in MANIFEST: t/loc_ro.t
Not in MANIFEST: t/loc_ru.t
Not in MANIFEST: t/loc_se.t
Not in MANIFEST: t/loc_sk.t
Not in MANIFEST: t/loc_sl.t
Not in MANIFEST: t/loc_sq.t
Not in MANIFEST: t/loc_sr.t
Not in MANIFEST: t/loc_sv.t
Not in MANIFEST: t/loc_sw.t
Not in MANIFEST: t/loc_test.t
Not in MANIFEST: t/loc_tn.t
Not in MANIFEST: t/loc_to.t
Not in MANIFEST: t/loc_tr.t
Not in MANIFEST: t/loc_uk.t
Not in MANIFEST: t/loc_vi.t
Not in MANIFEST: t/loc_wo.t
Not in MANIFEST: t/loc_yo.t
Not in MANIFEST: t/loc_zh.t
Not in MANIFEST: t/loc_zhb5.t
Not in MANIFEST: t/loc_zhgb.t
Not in MANIFEST: t/loc_zhpy.t
Not in MANIFEST: t/loc_zhst.t
Not in MANIFEST: t/nonchar.t
Not in MANIFEST: t/normal.t
Not in MANIFEST: t/overcjk0.t
Not in MANIFEST: t/overcjk1.t
Not in MANIFEST: t/override.t
Not in MANIFEST: t/rearrang.t
Not in MANIFEST: t/test.t
Not in MANIFEST: t/trailwt.t
Not in MANIFEST: t/variable.t
Not in MANIFEST: t/version.t
Not in MANIFEST: t/view.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Unicode-Collate'
Making Unicode::Normalize (distclean)
Running Makefile.PL in cpan/Unicode-Normalize
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Making header files for XS...
Unicode::Normalize, mkheader: CombiningClass.pl not found at mkheader line 58
require mkheader called at Makefile.PL line 9
512 from cpan/Unicode-Normalize's Makefile.PL at make_ext.pl line 404.
Warning: No Makefile!
Making distclean in cpan/Unicode-Normalize
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Unicode-Normalize'
make[3]: *** No rule to make target `distclean'. Stop.
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Unicode-Normalize'
Unsuccessful make(cpan/Unicode-Normalize): code=512 at make_ext.pl line 463.
Making XS::APItest (distclean)
Running Makefile.PL in ext/XS-APItest
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for XS::APItest
Writing MYMETA.yml
Making distclean in ext/XS-APItest
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/XS-APItest'
rm -f \
core.[0-9] APItest.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml XSUB-undef-XS_VERSION.c \
perl tmon.out \
*.o pm_to_blib \
blibdirs.ts *perl.core \
core.*perl.*.? APItest.def \
core.[0-9][0-9][0-9] mon.out \
libAPItest.def perlmain.c \
perl.exe so_locations \
APItest.exp *.a \
core ../../lib/auto/XS/APItest/extralibs.all \
core.[0-9][0-9] numeric.c \
APItest.bs APItest.x \
../../lib/auto/XS/APItest/extralibs.ld APItest.c \
core.[0-9][0-9][0-9][0-9][0-9] Makefile.aperl \
perl XSUB-redefined-macros.c
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
APItest.o XSUB-undef-XS_VERSION.o XSUB-redefined-macros.o exception.o core.o notcore.o Makefile.old \
Makefile ../../lib/XS/APItest.pm
rm -rf \
../../lib/auto/XS/APItest const-c.inc \
../../lib/auto/XS/APItest const-xs.inc \
XS-APItest-0.28
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Not in MANIFEST: core.c
Not in MANIFEST: core_or_not.inc
Not in MANIFEST: notcore.c
Not in MANIFEST: numeric.xs
Not in MANIFEST: t/arrayexpr.t
Not in MANIFEST: t/BHK.pm
Not in MANIFEST: t/Block.pm
Not in MANIFEST: t/blockasexpr.t
Not in MANIFEST: t/blockhooks-csc.t
Not in MANIFEST: t/blockhooks.t
Not in MANIFEST: t/call_checker.t
Not in MANIFEST: t/caller.t
Not in MANIFEST: t/cleanup.t
Not in MANIFEST: t/cophh.t
Not in MANIFEST: t/copyhints.t
Not in MANIFEST: t/customop.t
Not in MANIFEST: t/eval-filter.t
Not in MANIFEST: t/exception.t
Not in MANIFEST: t/grok.t
Not in MANIFEST: t/keyword_multiline.t
Not in MANIFEST: t/keyword_plugin.t
Not in MANIFEST: t/labelconst.aux
Not in MANIFEST: t/labelconst.t
Not in MANIFEST: t/loopblock.t
Not in MANIFEST: t/looprest.t
Not in MANIFEST: t/magic.t
Not in MANIFEST: t/magic_chain.t
Not in MANIFEST: t/Markers.pm
Not in MANIFEST: t/multicall.t
Not in MANIFEST: t/my_cxt.t
Not in MANIFEST: t/my_exit.t
Not in MANIFEST: t/Null.pm
Not in MANIFEST: t/op.t
Not in MANIFEST: t/op_contextualize.t
Not in MANIFEST: t/op_list.t
Not in MANIFEST: t/overload.t
Not in MANIFEST: t/peep.t
Not in MANIFEST: t/pmflag.t
Not in MANIFEST: t/postinc.t
Not in MANIFEST: t/ptr_table.t
Not in MANIFEST: t/refs.t
Not in MANIFEST: t/rmagical.t
Not in MANIFEST: t/rv2cv_op_cv.t
Not in MANIFEST: t/savehints.t
Not in MANIFEST: t/scopelessblock.t
Not in MANIFEST: t/stmtasexpr.t
Not in MANIFEST: t/stmtsasexpr.t
Not in MANIFEST: t/stuff_modify_bug.t
Not in MANIFEST: t/stuff_svcur_bug.t
Not in MANIFEST: t/svpeek.t
Not in MANIFEST: t/svpv_magic.t
Not in MANIFEST: t/svsetsv.t
Not in MANIFEST: t/swaplabel.t
Not in MANIFEST: t/swaptwostmts.t
Not in MANIFEST: t/temp_lv_sub.t
Not in MANIFEST: t/utf16_to_utf8.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: t/xs_special_subs.t
Not in MANIFEST: t/xs_special_subs_require.t
Not in MANIFEST: t/xsub_h.t
Not in MANIFEST: typemap
Not in MANIFEST: XSUB-redefined-macros.xs
Not in MANIFEST: XSUB-undef-XS_VERSION.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/XS-APItest'
Making XS::Typemap (distclean)
Running Makefile.PL in ext/XS-Typemap
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for XS::Typemap
Writing MYMETA.yml
Making distclean in ext/XS-Typemap
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/XS-Typemap'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/XS/Typemap/extralibs.all \
core.[0-9][0-9] Typemap.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Typemap.x \
Typemap.bs perl \
tmon.out Typemap.c \
*.o pm_to_blib \
../../lib/auto/XS/Typemap/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Typemap.def perl \
core.[0-9][0-9][0-9] mon.out \
libTypemap.def perlmain.c \
perl.exe so_locations \
Typemap.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
stdio.o Typemap.o ../../lib/XS/Typemap.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/XS/Typemap ../../lib/auto/XS/Typemap \
XS-Typemap-0.05
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Makefile.PL
Not in MANIFEST: README
Not in MANIFEST: stdio.c
Not in MANIFEST: t/Typemap.t
Not in MANIFEST: typemap
Not in MANIFEST: Typemap.pm
Not in MANIFEST: Typemap.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/XS-Typemap'
Making attributes (distclean)
Creating Makefile.PL in ext/attributes for attributes
Running Makefile.PL in ext/attributes
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for attributes
Writing MYMETA.yml
Making distclean in ext/attributes
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/attributes'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/attributes/extralibs.all \
core.[0-9][0-9] attributes.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml attributes.x \
attributes.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/attributes/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl attributes.def \
perl core.[0-9][0-9][0-9] \
mon.out attributes.c \
libattributes.def perlmain.c \
perl.exe so_locations \
attributes.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
attributes.o Makefile.old \
Makefile ../../lib/attributes.pm
rm -rf \
../../lib/auto/attributes ../../lib/auto/attributes \
attributes-0.14 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: attributes.pm
Not in MANIFEST: attributes.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/attributes'
Making mro (distclean)
Creating Makefile.PL in ext/mro for mro
Running Makefile.PL in ext/mro
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for mro
Writing MYMETA.yml
Making distclean in ext/mro
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/mro'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/mro/extralibs.all \
core.[0-9][0-9] mro.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml mro.x \
mro.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/mro/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
mro.c *perl.core \
core.*perl.*.? Makefile.aperl \
mro.def perl \
core.[0-9][0-9][0-9] mon.out \
libmro.def perlmain.c \
perl.exe so_locations \
mro.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
mro.o ../../lib/mro.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/mro ../../lib/auto/mro \
mro-1.07 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: mro.pm
Not in MANIFEST: mro.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/mro'
Making re (distclean)
Running Makefile.PL in ext/re
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for re
Writing MYMETA.yml
Making distclean in ext/re
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/re'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/re/extralibs.all \
core.[0-9][0-9] re.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml re.x \
re.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/re/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl re.def \
perl core.[0-9][0-9][0-9] \
mon.out libre.def \
perlmain.c perl.exe \
so_locations re.exp \
re.c
rm -rf \
../../lib/re.pm *.o \
*.c blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
re_exec.o re_comp.o re.o ../../lib/re.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/re ../../lib/auto/re \
re-0.18
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/mpeix.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: re.pm
Not in MANIFEST: re.xs
Not in MANIFEST: re_comp.h
Not in MANIFEST: re_top.h
Not in MANIFEST: t/lexical_debug.pl
Not in MANIFEST: t/lexical_debug.t
Not in MANIFEST: t/qr.t
Not in MANIFEST: t/re.t
Not in MANIFEST: t/re_funcs.t
Not in MANIFEST: t/re_funcs_u.t
Not in MANIFEST: t/reflags.t
Not in MANIFEST: t/regop.pl
Not in MANIFEST: t/regop.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/re'
Making threads (distclean)
Creating Makefile.PL in dist/threads for threads
Running Makefile.PL in dist/threads
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Writing Makefile for threads
Writing MYMETA.yml
Making distclean in dist/threads
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/threads'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/threads/extralibs.all \
core.[0-9][0-9] threads.bso \
pm_to_blib.ts threads.c \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
threads.x threads.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/threads/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
threads.def perl \
core.[0-9][0-9][0-9] mon.out \
libthreads.def perlmain.c \
perl.exe so_locations \
threads.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
threads.o ../../lib/threads.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/threads ../../lib/auto/threads \
threads-1.83 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/hpux.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: lib/threads.pm
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/blocks.t
Not in MANIFEST: t/context.t
Not in MANIFEST: t/end.t
Not in MANIFEST: t/err.t
Not in MANIFEST: t/exit.t
Not in MANIFEST: t/free.t
Not in MANIFEST: t/free2.t
Not in MANIFEST: t/join.t
Not in MANIFEST: t/kill.t
Not in MANIFEST: t/kill2.t
Not in MANIFEST: t/libc.t
Not in MANIFEST: t/list.t
Not in MANIFEST: t/no_threads.t
Not in MANIFEST: t/problems.t
Not in MANIFEST: t/stack.t
Not in MANIFEST: t/stack_env.t
Not in MANIFEST: t/state.t
Not in MANIFEST: t/stress_cv.t
Not in MANIFEST: t/stress_re.t
Not in MANIFEST: t/stress_string.t
Not in MANIFEST: t/thread.t
Not in MANIFEST: threads.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/threads'
Making threads::shared (distclean)
Creating Makefile.PL in dist/threads-shared for threads::shared
Running Makefile.PL in dist/threads-shared
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Writing Makefile for threads::shared
Writing MYMETA.yml
Making distclean in dist/threads-shared
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/threads-shared'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/threads/shared/extralibs.all \
core.[0-9][0-9] shared.bso \
pm_to_blib.ts shared.c \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
shared.x shared.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/threads/shared/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
shared.def perl \
core.[0-9][0-9][0-9] mon.out \
libshared.def perlmain.c \
perl.exe so_locations \
shared.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
shared.o ../../lib/threads/shared.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/threads/shared ../../lib/auto/threads/shared \
threads-shared-1.37 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: lib/threads/shared.pm
Not in MANIFEST: shared.xs
Not in MANIFEST: t/0nothread.t
Not in MANIFEST: t/av_refs.t
Not in MANIFEST: t/av_simple.t
Not in MANIFEST: t/blessed.t
Not in MANIFEST: t/clone.t
Not in MANIFEST: t/cond.t
Not in MANIFEST: t/disabled.t
Not in MANIFEST: t/hv_refs.t
Not in MANIFEST: t/hv_simple.t
Not in MANIFEST: t/no_share.t
Not in MANIFEST: t/object.t
Not in MANIFEST: t/shared_attr.t
Not in MANIFEST: t/stress.t
Not in MANIFEST: t/sv_refs.t
Not in MANIFEST: t/sv_simple.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: t/wait.t
Not in MANIFEST: t/waithires.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/threads-shared'
Making Archive::Extract (distclean)
Making distclean in cpan/Archive-Extract
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Archive/Extract/extralibs.all \
core.[0-9][0-9] Extract.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Extract.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Archive/Extract/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Extract.def core.[0-9][0-9][0-9] \
mon.out libExtract.def \
perlmain.c perl.exe \
so_locations Extract.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Archive/Extract.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Archive/Extract ../../lib/auto/Archive/Extract \
Archive-Extract-0.48 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Archive/Extract.pm
Not in MANIFEST: t/01_Archive-Extract.t
Not in MANIFEST: t/src/double_dir.zip
Not in MANIFEST: t/src/x.bz2
Not in MANIFEST: t/src/x.gz
Not in MANIFEST: t/src/x.jar
Not in MANIFEST: t/src/x.lzma
Not in MANIFEST: t/src/x.par
Not in MANIFEST: t/src/x.tar
Not in MANIFEST: t/src/x.tar.gz
Not in MANIFEST: t/src/x.tar.xz
Not in MANIFEST: t/src/x.tgz
Not in MANIFEST: t/src/x.txz
Not in MANIFEST: t/src/x.xz
Not in MANIFEST: t/src/x.Z
Not in MANIFEST: t/src/x.zip
Not in MANIFEST: t/src/y.jar
Not in MANIFEST: t/src/y.par
Not in MANIFEST: t/src/y.tar
Not in MANIFEST: t/src/y.tar.bz2
Not in MANIFEST: t/src/y.tar.gz
Not in MANIFEST: t/src/y.tar.xz
Not in MANIFEST: t/src/y.tbz
Not in MANIFEST: t/src/y.tgz
Not in MANIFEST: t/src/y.txz
Not in MANIFEST: t/src/y.zip
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
Making Archive::Tar (distclean)
Making distclean in cpan/Archive-Tar
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Archive/Tar/extralibs.all \
core.[0-9][0-9] Tar.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Tar.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Archive/Tar/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Tar.def core.[0-9][0-9][0-9] \
mon.out libTar.def \
perlmain.c perl.exe \
so_locations Tar.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Archive/Tar.pm ../../lib/Archive/Tar/File.pm \
../../lib/Archive/Tar/Constant.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Archive/Tar ../../lib/auto/Archive/Tar \
Archive-Tar-1.76 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bin/ptar
Not in MANIFEST: bin/ptardiff
Not in MANIFEST: bin/ptargrep
Not in MANIFEST: lib/Archive/Tar.pm
Not in MANIFEST: lib/Archive/Tar/Constant.pm
Not in MANIFEST: lib/Archive/Tar/File.pm
Not in MANIFEST: t/01_use.t
Not in MANIFEST: t/02_methods.t
Not in MANIFEST: t/03_file.t
Not in MANIFEST: t/04_resolved_issues.t
Not in MANIFEST: t/05_iter.t
Not in MANIFEST: t/06_error.t
Not in MANIFEST: t/90_symlink.t
Not in MANIFEST: t/99_pod.t
Not in MANIFEST: t/src/header/signed.tar
Not in MANIFEST: t/src/linktest/linktest_missing_dir.tar
Not in MANIFEST: t/src/linktest/linktest_with_dir.tar
Not in MANIFEST: t/src/long/b
Not in MANIFEST: t/src/long/bar.tar
Not in MANIFEST: t/src/long/foo.tbz
Not in MANIFEST: t/src/long/foo.tgz
Not in MANIFEST: t/src/short/b
Not in MANIFEST: t/src/short/bar.tar
Not in MANIFEST: t/src/short/foo.tbz
Not in MANIFEST: t/src/short/foo.tgz
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
Making Attribute::Handlers (distclean)
Making distclean in dist/Attribute-Handlers
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Attribute/Handlers/extralibs.all \
core.[0-9][0-9] Handlers.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Handlers.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Attribute/Handlers/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Handlers.def core.[0-9][0-9][0-9] \
mon.out libHandlers.def \
perlmain.c perl.exe \
so_locations Handlers.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Attribute/Handlers.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Attribute/Handlers ../../lib/auto/Attribute/Handlers \
Attribute-Handlers-0.89 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: demo/demo.pl
Not in MANIFEST: demo/Demo.pm
Not in MANIFEST: demo/demo2.pl
Not in MANIFEST: demo/demo3.pl
Not in MANIFEST: demo/demo4.pl
Not in MANIFEST: demo/demo_call.pl
Not in MANIFEST: demo/demo_chain.pl
Not in MANIFEST: demo/demo_cycle.pl
Not in MANIFEST: demo/demo_hashdir.pl
Not in MANIFEST: demo/demo_phases.pl
Not in MANIFEST: demo/demo_range.pl
Not in MANIFEST: demo/demo_rawdata.pl
Not in MANIFEST: demo/Descriptions.pm
Not in MANIFEST: demo/MyClass.pm
Not in MANIFEST: lib/Attribute/Handlers.pm
Not in MANIFEST: README
Not in MANIFEST: t/constants.t
Not in MANIFEST: t/data_convert.t
Not in MANIFEST: t/linerep.t
Not in MANIFEST: t/multi.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
Making AutoLoader (distclean)
Making distclean in cpan/AutoLoader
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/AutoLoader/extralibs.all \
core.[0-9][0-9] AutoLoader.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml AutoLoader.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/AutoLoader/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
AutoLoader.def core.[0-9][0-9][0-9] \
mon.out libAutoLoader.def \
perlmain.c perl.exe \
so_locations AutoLoader.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/AutoSplit.pm Makefile.old \
Makefile ../../lib/AutoLoader.pm
rm -rf \
../../lib/auto/AutoLoader ../../lib/auto/AutoLoader \
AutoLoader-5.71 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/AutoLoader.pm
Not in MANIFEST: lib/AutoSplit.pm
Not in MANIFEST: t/01AutoLoader.t
Not in MANIFEST: t/02AutoSplit.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
Making B::Debug (distclean)
Making distclean in cpan/B-Debug
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/B/Debug/extralibs.all \
core.[0-9][0-9] Debug.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Debug.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/B/Debug/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Debug.def core.[0-9][0-9][0-9] \
mon.out libDebug.def \
perlmain.c perl.exe \
so_locations Debug.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/B/Debug.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/B/Debug ../../lib/auto/B/Debug \
B-Debug-1.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Debug.pm
Not in MANIFEST: t/debug.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
Making B::Deparse (distclean)
Making distclean in dist/B-Deparse
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/B/Deparse/extralibs.all \
core.[0-9][0-9] Deparse.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Deparse.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/B/Deparse/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Deparse.def core.[0-9][0-9][0-9] \
mon.out libDeparse.def \
perlmain.c perl.exe \
so_locations Deparse.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/B/Deparse.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/B/Deparse ../../lib/auto/B/Deparse \
B-Deparse-1.04 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Deparse.pm
Not in MANIFEST: t/deparse.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
Making B::Lint (distclean)
Making distclean in dist/B-Lint
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/B/Lint/extralibs.all \
core.[0-9][0-9] Lint.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Lint.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/B/Lint/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Lint.def core.[0-9][0-9][0-9] \
mon.out libLint.def \
perlmain.c perl.exe \
so_locations Lint.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/B/Lint/Debug.pm ../../lib/B/Lint.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/B/Lint ../../lib/auto/B/Lint \
B-Lint-1.13 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/B/Lint.pm
Not in MANIFEST: lib/B/Lint/Debug.pm
Not in MANIFEST: t/lint.t
Not in MANIFEST: t/pluglib/B/Lint/Plugin/Test.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
Making CGI (distclean)
Making distclean in cpan/CGI
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CGI/extralibs.all \
core.[0-9][0-9] CGI.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CGI.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CGI/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CGI.def core.[0-9][0-9][0-9] \
mon.out libCGI.def \
perlmain.c perl.exe \
so_locations CGI.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CGI/Fast.pm ../../lib/CGI.pm \
../../lib/CGI/Carp.pm ../../lib/CGI/Pretty.pm \
Makefile.old ../../lib/CGI/Push.pm \
../../lib/CGI/Switch.pm ../../lib/CGI/Apache.pm \
Makefile ../../lib/CGI/Cookie.pm \
../../lib/CGI/Util.pm
rm -rf \
../../lib/auto/CGI ../../lib/auto/CGI \
CGI-3.52 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: examples/caution.xbm
Not in MANIFEST: examples/clickable_image.cgi
Not in MANIFEST: examples/cookie.cgi
Not in MANIFEST: examples/crash.cgi
Not in MANIFEST: examples/customize.cgi
Not in MANIFEST: examples/diff_upload.cgi
Not in MANIFEST: examples/dna.small.gif
Not in MANIFEST: examples/file_upload.cgi
Not in MANIFEST: examples/frameset.cgi
Not in MANIFEST: examples/index.html
Not in MANIFEST: examples/internal_links.cgi
Not in MANIFEST: examples/javascript.cgi
Not in MANIFEST: examples/make_links.pl
Not in MANIFEST: examples/monty.cgi
Not in MANIFEST: examples/multiple_forms.cgi
Not in MANIFEST: examples/nph-clock.cgi
Not in MANIFEST: examples/nph-multipart.cgi
Not in MANIFEST: examples/popup.cgi
Not in MANIFEST: examples/save_state.cgi
Not in MANIFEST: examples/tryit.cgi
Not in MANIFEST: examples/wilogo.gif
Not in MANIFEST: lib/CGI.pm
Not in MANIFEST: lib/CGI/Apache.pm
Not in MANIFEST: lib/CGI/Carp.pm
Not in MANIFEST: lib/CGI/Cookie.pm
Not in MANIFEST: lib/CGI/Fast.pm
Not in MANIFEST: lib/CGI/Pretty.pm
Not in MANIFEST: lib/CGI/Push.pm
Not in MANIFEST: lib/CGI/Switch.pm
Not in MANIFEST: lib/CGI/Util.pm
Not in MANIFEST: t/apache.t
Not in MANIFEST: t/autoescape.t
Not in MANIFEST: t/can.t
Not in MANIFEST: t/carp.t
Not in MANIFEST: t/charset.t
Not in MANIFEST: t/checkbox_group.t
Not in MANIFEST: t/cookie.t
Not in MANIFEST: t/Dump.t
Not in MANIFEST: t/end_form.t
Not in MANIFEST: t/form.t
Not in MANIFEST: t/function.t
Not in MANIFEST: t/headers.t
Not in MANIFEST: t/hidden.t
Not in MANIFEST: t/html.t
Not in MANIFEST: t/http.t
Not in MANIFEST: t/init.t
Not in MANIFEST: t/init_test.txt
Not in MANIFEST: t/no_tabindex.t
Not in MANIFEST: t/param_fetch.t
Not in MANIFEST: t/popup_menu.t
Not in MANIFEST: t/pretty.t
Not in MANIFEST: t/push.t
Not in MANIFEST: t/query_string.t
Not in MANIFEST: t/request.t
Not in MANIFEST: t/save_read_roundtrip.t
Not in MANIFEST: t/start_end_asterisk.t
Not in MANIFEST: t/start_end_end.t
Not in MANIFEST: t/start_end_start.t
Not in MANIFEST: t/switch.t
Not in MANIFEST: t/unescapeHTML.t
Not in MANIFEST: t/upload.t
Not in MANIFEST: t/upload_post_text.txt
Not in MANIFEST: t/uploadInfo.t
Not in MANIFEST: t/url.t
Not in MANIFEST: t/user_agent.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: t/util-58.t
Not in MANIFEST: t/util.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
Making CPAN (distclean)
Making distclean in cpan/CPAN
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CPAN/extralibs.all \
core.[0-9][0-9] CPAN.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CPAN.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CPAN/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CPAN.def core.[0-9][0-9][0-9] \
mon.out libCPAN.def \
perlmain.c perl.exe \
so_locations CPAN.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CPAN/Debug.pm ../../lib/CPAN/Distroprefs.pm \
../../lib/CPAN/Exception/blocked_urllist.pm ../../lib/CPAN/Index.pm \
../../lib/CPAN/InfoObj.pm ../../lib/CPAN/Version.pm \
../../lib/CPAN/Module.pm ../../lib/CPAN/CacheMgr.pm \
Makefile ../../lib/CPAN/Complete.pm \
../../lib/CPAN/URL.pm ../../lib/CPAN/HTTP/Credentials.pm \
../../lib/CPAN/FirstTime.pm ../../lib/App/Cpan.pm \
../../lib/CPAN/Distrostatus.pm ../../lib/CPAN/DeferredCode.pm \
../../lib/CPAN/Bundle.pm ../../lib/CPAN/Nox.pm \
../../lib/CPAN/Tarzip.pm ../../lib/CPAN/Kwalify.pm \
Makefile.old ../../lib/CPAN/Author.pm \
../../lib/CPAN/Queue.pm ../../lib/CPAN/Exception/yaml_not_installed.pm \
../../lib/CPAN.pm ../../lib/CPAN/HTTP/Client.pm \
../../lib/CPAN/Kwalify/distroprefs.dd ../../lib/CPAN/Kwalify/distroprefs.yml \
../../lib/CPAN/API/HOWTO.pod ../../lib/CPAN/FTP/netrc.pm \
../../lib/CPAN/Shell.pm ../../lib/CPAN/Exception/RecursiveDependency.pm \
../../lib/CPAN/LWP/UserAgent.pm ../../lib/CPAN/Mirrors.pm \
../../lib/CPAN/FTP.pm ../../lib/CPAN/Prompt.pm \
../../lib/CPAN/Distribution.pm ../../lib/CPAN/HandleConfig.pm
rm -rf \
../../lib/auto/CPAN ../../lib/auto/CPAN \
CPAN-1.9600_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/App/Cpan.pm
Not in MANIFEST: lib/CPAN.pm
Not in MANIFEST: lib/CPAN/API/HOWTO.pod
Not in MANIFEST: lib/CPAN/Author.pm
Not in MANIFEST: lib/CPAN/Bundle.pm
Not in MANIFEST: lib/CPAN/CacheMgr.pm
Not in MANIFEST: lib/CPAN/Complete.pm
Not in MANIFEST: lib/CPAN/Debug.pm
Not in MANIFEST: lib/CPAN/DeferredCode.pm
Not in MANIFEST: lib/CPAN/Distribution.pm
Not in MANIFEST: lib/CPAN/Distroprefs.pm
Not in MANIFEST: lib/CPAN/Distrostatus.pm
Not in MANIFEST: lib/CPAN/Exception/blocked_urllist.pm
Not in MANIFEST: lib/CPAN/Exception/RecursiveDependency.pm
Not in MANIFEST: lib/CPAN/Exception/yaml_not_installed.pm
Not in MANIFEST: lib/CPAN/FirstTime.pm
Not in MANIFEST: lib/CPAN/FTP.pm
Not in MANIFEST: lib/CPAN/FTP/netrc.pm
Not in MANIFEST: lib/CPAN/HandleConfig.pm
Not in MANIFEST: lib/CPAN/HTTP/Client.pm
Not in MANIFEST: lib/CPAN/HTTP/Credentials.pm
Not in MANIFEST: lib/CPAN/Index.pm
Not in MANIFEST: lib/CPAN/InfoObj.pm
Not in MANIFEST: lib/CPAN/Kwalify.pm
Not in MANIFEST: lib/CPAN/Kwalify/distroprefs.dd
Not in MANIFEST: lib/CPAN/Kwalify/distroprefs.yml
Not in MANIFEST: lib/CPAN/LWP/UserAgent.pm
Not in MANIFEST: lib/CPAN/Mirrors.pm
Not in MANIFEST: lib/CPAN/Module.pm
Not in MANIFEST: lib/CPAN/Nox.pm
Not in MANIFEST: lib/CPAN/Prompt.pm
Not in MANIFEST: lib/CPAN/Queue.pm
Not in MANIFEST: lib/CPAN/Shell.pm
Not in MANIFEST: lib/CPAN/Tarzip.pm
Not in MANIFEST: lib/CPAN/URL.pm
Not in MANIFEST: lib/CPAN/Version.pm
Not in MANIFEST: PAUSE2003.pub
Not in MANIFEST: PAUSE2005.pub
Not in MANIFEST: PAUSE2007.pub
Not in MANIFEST: PAUSE2009.pub
Not in MANIFEST: PAUSE2011.pub
Not in MANIFEST: scripts/cpan
Not in MANIFEST: t/01loadme.t
Not in MANIFEST: t/02nox.t
Not in MANIFEST: t/03pkgs.t
Not in MANIFEST: t/10version.t
Not in MANIFEST: t/11mirroredby.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
Making CPAN::Meta (distclean)
Making distclean in cpan/CPAN-Meta
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CPAN/Meta/extralibs.all \
core.[0-9][0-9] Meta.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Meta.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CPAN/Meta/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Meta.def core.[0-9][0-9][0-9] \
mon.out libMeta.def \
perlmain.c perl.exe \
so_locations Meta.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CPAN/Meta/Feature.pm ../../lib/CPAN/Meta/Prereqs.pm \
Makefile.old ../../lib/CPAN/Meta/Spec.pm \
../../lib/CPAN/Meta/History.pm ../../lib/CPAN/Meta/Validator.pm \
../../lib/CPAN/Meta/Converter.pm Makefile \
../../lib/CPAN/Meta.pm
rm -rf \
../../lib/auto/CPAN/Meta ../../lib/auto/CPAN/Meta \
CPAN-Meta-2.110440 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/CPAN/Meta.pm
Not in MANIFEST: lib/CPAN/Meta/Converter.pm
Not in MANIFEST: lib/CPAN/Meta/Feature.pm
Not in MANIFEST: lib/CPAN/Meta/History.pm
Not in MANIFEST: lib/CPAN/Meta/Prereqs.pm
Not in MANIFEST: lib/CPAN/Meta/Spec.pm
Not in MANIFEST: lib/CPAN/Meta/Validator.pm
Not in MANIFEST: t/converter-bad.t
Not in MANIFEST: t/converter-fail.t
Not in MANIFEST: t/converter.t
Not in MANIFEST: t/data-bad/107650337-META.yml
Not in MANIFEST: t/data-bad/1122575719-META.yml
Not in MANIFEST: t/data-bad/1206545041-META.yml
Not in MANIFEST: t/data-bad/1598804075-META.yml
Not in MANIFEST: t/data-bad/1927486199-META.yml
Not in MANIFEST: t/data-bad/1985684504-META.yml
Not in MANIFEST: t/data-bad/1985980974-META.yml
Not in MANIFEST: t/data-bad/2031017050-META.yml
Not in MANIFEST: t/data-bad/284247103-META.yml
Not in MANIFEST: t/data-bad/344981821-META.yml
Not in MANIFEST: t/data-bad/35478989-META.yml
Not in MANIFEST: t/data-bad/476602558-META.yml
Not in MANIFEST: t/data-bad/98042513-META.yml
Not in MANIFEST: t/data-bad/META-1_0.yml
Not in MANIFEST: t/data-bad/META-1_1.yml
Not in MANIFEST: t/data-bad/META-1_2.yml
Not in MANIFEST: t/data-bad/META-1_3.yml
Not in MANIFEST: t/data-bad/META-1_4.yml
Not in MANIFEST: t/data-bad/META-2.json
Not in MANIFEST: t/data-bad/restrictive-2.json
Not in MANIFEST: t/data-fail/META-1_0.yml
Not in MANIFEST: t/data-fail/META-1_1.yml
Not in MANIFEST: t/data-fail/META-1_2.yml
Not in MANIFEST: t/data-fail/META-1_3.yml
Not in MANIFEST: t/data-fail/META-1_4.yml
Not in MANIFEST: t/data-fail/META-2.json
Not in MANIFEST: t/data/META-1_0.yml
Not in MANIFEST: t/data/META-1_1.yml
Not in MANIFEST: t/data/META-1_2.yml
Not in MANIFEST: t/data/META-1_3.yml
Not in MANIFEST: t/data/META-1_4.yml
Not in MANIFEST: t/data/META-2.json
Not in MANIFEST: t/data/resources.yml
Not in MANIFEST: t/data/restricted-2.json
Not in MANIFEST: t/data/restrictive-1_4.yml
Not in MANIFEST: t/load-bad.t
Not in MANIFEST: t/meta-obj.t
Not in MANIFEST: t/no-index.t
Not in MANIFEST: t/prereqs-finalize.t
Not in MANIFEST: t/prereqs-merge.t
Not in MANIFEST: t/prereqs.t
Not in MANIFEST: t/repository.t
Not in MANIFEST: t/save-load.t
Not in MANIFEST: t/validator.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
Making CPAN::Meta::YAML (distclean)
Making distclean in cpan/CPAN-Meta-YAML
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CPAN/Meta/YAML/extralibs.all \
core.[0-9][0-9] YAML.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml YAML.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CPAN/Meta/YAML/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
YAML.def core.[0-9][0-9][0-9] \
mon.out libYAML.def \
perlmain.c perl.exe \
so_locations YAML.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CPAN/Meta/YAML.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/CPAN/Meta/YAML ../../lib/auto/CPAN/Meta/YAML \
CPAN-Meta-YAML-0.003 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/CPAN/Meta/YAML.pm
Not in MANIFEST: t/01_compile.t
Not in MANIFEST: t/02_basic.t
Not in MANIFEST: t/03_regression.t
Not in MANIFEST: t/05_export.t
Not in MANIFEST: t/11_meta_yml.t
Not in MANIFEST: t/12_plagger.t
Not in MANIFEST: t/13_perl_smith.t
Not in MANIFEST: t/14_yaml_org.t
Not in MANIFEST: t/15_multibyte.t
Not in MANIFEST: t/16_nullrefs.t
Not in MANIFEST: t/17_toolbar.t
Not in MANIFEST: t/18_tap.t
Not in MANIFEST: t/19_errors.t
Not in MANIFEST: t/20_subclass.t
Not in MANIFEST: t/21_bom.t
Not in MANIFEST: t/22_comments.t
Not in MANIFEST: t/data/HTML-WebDAO.yml
Not in MANIFEST: t/data/multibyte.yml
Not in MANIFEST: t/data/one.yml
Not in MANIFEST: t/data/sample.yml
Not in MANIFEST: t/data/Spreadsheet-Read.yml
Not in MANIFEST: t/data/Template-Provider-Unicode-Japanese.yml
Not in MANIFEST: t/data/toolbar.yml
Not in MANIFEST: t/data/two.yml
Not in MANIFEST: t/data/utf_16_le_bom.yml
Not in MANIFEST: t/data/vanilla.yml
Not in MANIFEST: t/lib/Test.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
Making CPANPLUS (distclean)
Making distclean in cpan/CPANPLUS
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
rm -f \
blib/script/cpanp-run-perl blib/script/cpan2dist \
blib/script/cpanp
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CPANPLUS/extralibs.all \
core.[0-9][0-9] CPANPLUS.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CPANPLUS.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CPANPLUS/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CPANPLUS.def core.[0-9][0-9][0-9] \
mon.out libCPANPLUS.def \
perlmain.c perl.exe \
so_locations CPANPLUS.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CPANPLUS/Shell/Default/Plugins/Source.pm ../../lib/CPANPLUS/Dist/Sample.pm \
../../lib/CPANPLUS/Internals/Utils.pm ../../lib/CPANPLUS/Internals/Source/SQLite.pm \
../../lib/CPANPLUS/Internals/Utils/Autoflush.pm ../../lib/CPANPLUS/Selfupdate.pm \
../../lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm ../../lib/CPANPLUS/Configure.pm \
../../lib/CPANPLUS/Module/Author.pm ../../lib/CPANPLUS/Hacking.pod \
../../lib/CPANPLUS/Config/System.pm ../../lib/CPANPLUS/Dist/MM.pm \
../../lib/CPANPLUS/Module/Signature.pm Makefile \
../../lib/CPANPLUS/Internals/Source/Memory.pm ../../lib/CPANPLUS/Internals/Constants/Report.pm \
../../lib/CPANPLUS/Internals/Source.pm ../../lib/CPANPLUS/FAQ.pod \
../../lib/CPANPLUS/Module/Author/Fake.pm ../../lib/CPANPLUS/Shell/Classic.pm \
../../lib/CPANPLUS/Internals.pm ../../lib/CPANPLUS/Error.pm \
../../lib/CPANPLUS/Internals/Fetch.pm ../../lib/CPANPLUS/Dist.pm \
../../lib/CPANPLUS/Backend/RV.pm ../../lib/CPANPLUS/Dist/Autobundle.pm \
../../lib/CPANPLUS/Internals/Search.pm ../../lib/CPANPLUS/Internals/Source/SQLite/Tie.pm \
Makefile.old ../../lib/CPANPLUS/Dist/Base.pm \
../../lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod ../../lib/CPANPLUS/Shell/Default/Plugins/Remote.pm \
../../lib/CPANPLUS/Internals/Constants.pm ../../lib/CPANPLUS/Module.pm \
../../lib/CPANPLUS.pm ../../lib/CPANPLUS/Backend.pm \
../../lib/CPANPLUS/Shell.pm ../../lib/CPANPLUS/Module/Fake.pm \
../../lib/CPANPLUS/Config.pm ../../lib/CPANPLUS/Configure/Setup.pm \
../../lib/CPANPLUS/Internals/Extract.pm ../../lib/CPANPLUS/Internals/Report.pm \
../../lib/CPANPLUS/Shell/Default.pm ../../lib/CPANPLUS/Module/Checksums.pm
rm -rf \
../../lib/auto/CPANPLUS ../../lib/auto/CPANPLUS \
CPANPLUS-0.9103
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bin/cpan2dist
Not in MANIFEST: bin/cpanp
Not in MANIFEST: bin/cpanp-run-perl
Not in MANIFEST: lib/CPANPLUS.pm
Not in MANIFEST: lib/CPANPLUS/Backend.pm
Not in MANIFEST: lib/CPANPLUS/Backend/RV.pm
Not in MANIFEST: lib/CPANPLUS/Config.pm
Not in MANIFEST: lib/CPANPLUS/Config/System.pm
Not in MANIFEST: lib/CPANPLUS/Configure.pm
Not in MANIFEST: lib/CPANPLUS/Configure/Setup.pm
Not in MANIFEST: lib/CPANPLUS/Dist.pm
Not in MANIFEST: lib/CPANPLUS/Dist/Autobundle.pm
Not in MANIFEST: lib/CPANPLUS/Dist/Base.pm
Not in MANIFEST: lib/CPANPLUS/Dist/MM.pm
Not in MANIFEST: lib/CPANPLUS/Dist/Sample.pm
Not in MANIFEST: lib/CPANPLUS/Error.pm
Not in MANIFEST: lib/CPANPLUS/FAQ.pod
Not in MANIFEST: lib/CPANPLUS/Hacking.pod
Not in MANIFEST: lib/CPANPLUS/Internals.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Constants.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Constants/Report.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Extract.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Fetch.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Report.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Search.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Source.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Source/Memory.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Source/SQLite.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Source/SQLite/Tie.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Utils.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Utils/Autoflush.pm
Not in MANIFEST: lib/CPANPLUS/Module.pm
Not in MANIFEST: lib/CPANPLUS/Module/Author.pm
Not in MANIFEST: lib/CPANPLUS/Module/Author/Fake.pm
Not in MANIFEST: lib/CPANPLUS/Module/Checksums.pm
Not in MANIFEST: lib/CPANPLUS/Module/Fake.pm
Not in MANIFEST: lib/CPANPLUS/Module/Signature.pm
Not in MANIFEST: lib/CPANPLUS/Selfupdate.pm
Not in MANIFEST: lib/CPANPLUS/Shell.pm
Not in MANIFEST: lib/CPANPLUS/Shell/Classic.pm
Not in MANIFEST: lib/CPANPLUS/Shell/Default.pm
Not in MANIFEST: lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm
Not in MANIFEST: lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod
Not in MANIFEST: lib/CPANPLUS/Shell/Default/Plugins/Remote.pm
Not in MANIFEST: lib/CPANPLUS/Shell/Default/Plugins/Source.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/00_CPANPLUS-Internals-Utils.t
Not in MANIFEST: t/01_CPANPLUS-Configure.t
Not in MANIFEST: t/02_CPANPLUS-Internals.t
Not in MANIFEST: t/03_CPANPLUS-Internals-Source.t
Not in MANIFEST: t/04_CPANPLUS-Module.t
Not in MANIFEST: t/05_CPANPLUS-Internals-Fetch.t
Not in MANIFEST: t/06_CPANPLUS-Internals-Constants.t
Not in MANIFEST: t/07_CPANPLUS-Internals-Extract.t
Not in MANIFEST: t/08_CPANPLUS-Backend.t
Not in MANIFEST: t/09_CPANPLUS-Internals-Search.t
Not in MANIFEST: t/10_CPANPLUS-Error.t
Not in MANIFEST: t/15_CPANPLUS-Shell.t
Not in MANIFEST: t/19_CPANPLUS-Dist.t
Not in MANIFEST: t/20_CPANPLUS-Dist-MM.t
Not in MANIFEST: t/21_CPANPLUS-Dist-No-Build.t
Not in MANIFEST: t/25_CPANPLUS.t
Not in MANIFEST: t/30_CPANPLUS-Internals-Selfupdate.t
Not in MANIFEST: t/40_CPANPLUS-Internals-Report.t
Not in MANIFEST: t/dummy-CPAN/authors/01mailrc.txt.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/Bundle-Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/CHECKSUMS
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/Foo-Bar-0.01.meta
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/Foo-Bar-0.01.readme
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/perl5.005_03.tar.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/EUXS/CHECKSUMS
Not in MANIFEST: t/dummy-CPAN/authors/id/EUXS/Foo-Bar-0.01.readme
Not in MANIFEST: t/dummy-CPAN/authors/id/EUXS/Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/MBNOXS/CHECKSUMS
Not in MANIFEST: t/dummy-CPAN/authors/id/MBNOXS/Foo-Bar-0.01.readme
Not in MANIFEST: t/dummy-CPAN/authors/id/MBNOXS/Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/MBXS/CHECKSUMS
Not in MANIFEST: t/dummy-CPAN/authors/id/MBXS/Foo-Bar-0.01.readme
Not in MANIFEST: t/dummy-CPAN/authors/id/MBXS/Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/dummy-CPAN/autobundle/Snapshot.pm
Not in MANIFEST: t/dummy-CPAN/modules/02packages.details.txt.gz
Not in MANIFEST: t/dummy-CPAN/modules/03modlist.data.gz
Not in MANIFEST: t/inc/conf.pl
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
Making CPANPLUS::Dist::Build (distclean)
Making distclean in cpan/CPANPLUS-Dist-Build
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CPANPLUS/Dist/Build/extralibs.all \
core.[0-9][0-9] Build.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Build.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CPANPLUS/Dist/Build/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Build.def core.[0-9][0-9][0-9] \
mon.out libBuild.def \
perlmain.c perl.exe \
so_locations Build.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CPANPLUS/Dist/Build.pm ../../lib/CPANPLUS/Dist/Build/Constants.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/CPANPLUS/Dist/Build ../../lib/auto/CPANPLUS/Dist/Build \
CPANPLUS-Dist-Build-0.54 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/CPANPLUS/Dist/Build.pm
Not in MANIFEST: lib/CPANPLUS/Dist/Build/Constants.pm
Not in MANIFEST: t/01_CPANPLUS-Dist-Build-Constants.t
Not in MANIFEST: t/02_CPANPLUS-Dist-Build.t
Not in MANIFEST: t/dummy-CPAN/authors/01mailrc.txt.gz
Not in MANIFEST: t/dummy-CPAN/modules/02packages.details.txt.gz
Not in MANIFEST: t/dummy-CPAN/modules/03modlist.data.gz
Not in MANIFEST: t/dummy-perl/.hidden
Not in MANIFEST: t/inc/conf.pl
Not in MANIFEST: t/src/noxs/Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/src/xs/Foo-Bar-0.01.tar.gz
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
Making Devel::SelfStubber (distclean)
Making distclean in dist/Devel-SelfStubber
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Devel/SelfStubber/extralibs.all \
core.[0-9][0-9] SelfStubber.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml SelfStubber.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Devel/SelfStubber/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
SelfStubber.def core.[0-9][0-9][0-9] \
mon.out libSelfStubber.def \
perlmain.c perl.exe \
so_locations SelfStubber.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Devel/SelfStubber.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Devel/SelfStubber ../../lib/auto/Devel/SelfStubber \
Devel-SelfStubber-1.05 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Devel/SelfStubber.pm
Not in MANIFEST: t/Devel-SelfStubber.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
Making Digest (distclean)
Making distclean in cpan/Digest
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Digest/extralibs.all \
core.[0-9][0-9] Digest.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Digest.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Digest/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Digest.def core.[0-9][0-9][0-9] \
mon.out libDigest.def \
perlmain.c perl.exe \
so_locations Digest.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Digest/base.pm ../../lib/Digest/file.pm \
../../lib/Digest.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Digest ../../lib/auto/Digest \
Digest-1.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Digest.pm
Not in MANIFEST: Digest/base.pm
Not in MANIFEST: Digest/file.pm
Not in MANIFEST: t/base.t
Not in MANIFEST: t/digest.t
Not in MANIFEST: t/file.t
Not in MANIFEST: t/security.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
Making Dumpvalue (distclean)
Making distclean in dist/Dumpvalue
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Dumpvalue/extralibs.all \
core.[0-9][0-9] Dumpvalue.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Dumpvalue.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Dumpvalue/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Dumpvalue.def core.[0-9][0-9][0-9] \
mon.out libDumpvalue.def \
perlmain.c perl.exe \
so_locations Dumpvalue.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Dumpvalue.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Dumpvalue ../../lib/auto/Dumpvalue \
Dumpvalue-1.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Dumpvalue.pm
Not in MANIFEST: t/Dumpvalue.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
Making Env (distclean)
Making distclean in dist/Env
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Env'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Env/extralibs.all \
core.[0-9][0-9] Env.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Env.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Env/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Env.def core.[0-9][0-9][0-9] \
mon.out libEnv.def \
perlmain.c perl.exe \
so_locations Env.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Env.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Env ../../lib/auto/Env \
Env-1.02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Env.pm
Not in MANIFEST: t/array.t
Not in MANIFEST: t/env.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Env'
Making Errno (distclean)
Making distclean in ext/Errno
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Errno'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Errno/extralibs.all \
core.[0-9][0-9] Errno.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Errno.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Errno/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Errno.def core.[0-9][0-9][0-9] \
mon.out libErrno.def \
perlmain.c perl.exe \
so_locations Errno.exp
rm -rf \
arch.txt blib \
Errno.pm
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Errno.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Errno ../../lib/auto/Errno \
Errno-1.13
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: Errno_pm.PL
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/Errno.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Errno'
Making ExtUtils::CBuilder (distclean)
Making distclean in dist/ExtUtils-CBuilder
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/CBuilder/extralibs.all \
core.[0-9][0-9] CBuilder.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CBuilder.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/CBuilder/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CBuilder.def core.[0-9][0-9][0-9] \
mon.out libCBuilder.def \
perlmain.c perl.exe \
so_locations CBuilder.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/CBuilder/Platform/darwin.pm ../../lib/ExtUtils/CBuilder/Platform/Windows.pm \
../../lib/ExtUtils/CBuilder/Platform/os2.pm ../../lib/ExtUtils/CBuilder/Platform/Unix.pm \
../../lib/ExtUtils/CBuilder/Platform/Windows/BCC.pm ../../lib/ExtUtils/CBuilder/Base.pm \
../../lib/ExtUtils/CBuilder/Platform/VMS.pm ../../lib/ExtUtils/CBuilder/Platform/dec_osf.pm \
../../lib/ExtUtils/CBuilder/Platform/Windows/MSVC.pm Makefile.old \
../../lib/ExtUtils/CBuilder/Platform/cygwin.pm ../../lib/ExtUtils/CBuilder/Platform/aix.pm \
../../lib/ExtUtils/CBuilder.pm Makefile \
../../lib/ExtUtils/CBuilder/Platform/Windows/GCC.pm
rm -rf \
../../lib/auto/ExtUtils/CBuilder ../../lib/auto/ExtUtils/CBuilder \
ExtUtils-CBuilder-0.280203 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/ExtUtils/CBuilder.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Base.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/aix.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/cygwin.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/darwin.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/dec_osf.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/os2.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/Unix.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/VMS.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/Windows.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/Windows/BCC.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/Windows/GCC.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/Windows/MSVC.pm
Not in MANIFEST: t/00-have-compiler.t
Not in MANIFEST: t/01-basic.t
Not in MANIFEST: t/02-link.t
Not in MANIFEST: t/03-cplusplus.t
Not in MANIFEST: t/04-base.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
Making ExtUtils::Command (distclean)
Making distclean in dist/ExtUtils-Command
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/Command/extralibs.all \
core.[0-9][0-9] Command.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Command.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/Command/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Command.def core.[0-9][0-9][0-9] \
mon.out libCommand.def \
perlmain.c perl.exe \
so_locations Command.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Makefile.old Makefile \
../../lib/ExtUtils/Command.pm
rm -rf \
../../lib/auto/ExtUtils/Command ../../lib/auto/ExtUtils/Command \
ExtUtils-Command-1.17 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/ExtUtils/Command.pm
Not in MANIFEST: t/cp.t
Not in MANIFEST: t/eu_command.t
Not in MANIFEST: t/lib/TieOut.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
Making ExtUtils::Constant (distclean)
Making distclean in cpan/ExtUtils-Constant
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/Constant/extralibs.all \
core.[0-9][0-9] Constant.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Constant.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/Constant/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Constant.def core.[0-9][0-9][0-9] \
mon.out libConstant.def \
perlmain.c perl.exe \
so_locations Constant.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/Constant/Utils.pm ../../lib/ExtUtils/Constant.pm \
../../lib/ExtUtils/Constant/Base.pm ../../lib/ExtUtils/Constant/XS.pm \
../../lib/ExtUtils/Constant/ProxySubs.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/ExtUtils/Constant ../../lib/auto/ExtUtils/Constant \
ExtUtils-Constant-0.23 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/ExtUtils/Constant.pm
Not in MANIFEST: lib/ExtUtils/Constant/Base.pm
Not in MANIFEST: lib/ExtUtils/Constant/ProxySubs.pm
Not in MANIFEST: lib/ExtUtils/Constant/Utils.pm
Not in MANIFEST: lib/ExtUtils/Constant/XS.pm
Not in MANIFEST: t/Constant.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
Making ExtUtils::Install (distclean)
Making distclean in dist/ExtUtils-Install
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/Install/extralibs.all \
core.[0-9][0-9] Install.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Install.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/Install/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Install.def core.[0-9][0-9][0-9] \
mon.out libInstall.def \
perlmain.c perl.exe \
so_locations Install.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/Install.pm ../../lib/ExtUtils/Installed.pm \
../../lib/ExtUtils/Packlist.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/ExtUtils/Install ../../lib/auto/ExtUtils/Install \
ExtUtils-Install-1.56 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/ExtUtils/Install.pm
Not in MANIFEST: lib/ExtUtils/Installed.pm
Not in MANIFEST: lib/ExtUtils/Packlist.pm
Not in MANIFEST: t/can_write_dir.t
Not in MANIFEST: t/Install.t
Not in MANIFEST: t/Installapi2.t
Not in MANIFEST: t/Installed.t
Not in MANIFEST: t/InstallWithMM.t
Not in MANIFEST: t/lib/MakeMaker/Test/Setup/BFD.pm
Not in MANIFEST: t/lib/MakeMaker/Test/Utils.pm
Not in MANIFEST: t/lib/TieOut.pm
Not in MANIFEST: t/Packlist.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
Making ExtUtils::MakeMaker (distclean)
Making distclean in cpan/ExtUtils-MakeMaker
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/MakeMaker/extralibs.all \
core.[0-9][0-9] MakeMaker.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml MakeMaker.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/MakeMaker/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
MakeMaker.def core.[0-9][0-9][0-9] \
mon.out libMakeMaker.def \
perlmain.c perl.exe \
so_locations MakeMaker.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/MM_OS2.pm ../../lib/ExtUtils/MM_Win95.pm \
../../lib/ExtUtils/Mkbootstrap.pm Makefile.old \
../../lib/ExtUtils/MM_Cygwin.pm ../../lib/ExtUtils/Command/MM.pm \
../../lib/ExtUtils/MakeMaker/YAML.pm ../../lib/ExtUtils/MakeMaker/Tutorial.pod \
../../lib/ExtUtils/MM_AIX.pm ../../lib/ExtUtils/MakeMaker/FAQ.pod \
Makefile ../../lib/ExtUtils/MM_Any.pm \
../../lib/ExtUtils/MakeMaker/Config.pm ../../lib/ExtUtils/MM_UWIN.pm \
../../lib/ExtUtils/MM_VOS.pm ../../lib/ExtUtils/Mksymlists.pm \
../../lib/ExtUtils/MakeMaker.pm ../../lib/ExtUtils/MM_NW5.pm \
../../lib/ExtUtils/MM_DOS.pm ../../lib/ExtUtils/MM_MacOS.pm \
../../lib/ExtUtils/MM_Win32.pm ../../lib/ExtUtils/Liblist/Kid.pm \
../../lib/ExtUtils/testlib.pm ../../lib/ExtUtils/MM_QNX.pm \
../../lib/ExtUtils/MM_BeOS.pm ../../lib/ExtUtils/MY.pm \
../../lib/ExtUtils/Liblist.pm ../../lib/ExtUtils/MM_Unix.pm \
../../lib/ExtUtils/MM_Darwin.pm ../../lib/ExtUtils/MM_VMS.pm \
../../lib/ExtUtils/MM.pm
rm -rf \
../../lib/auto/ExtUtils/MakeMaker ../../lib/auto/ExtUtils/MakeMaker \
ExtUtils-MakeMaker-6.57_05 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
No such file: .gitignore
No such file: inc/ExtUtils/Command.pm
No such file: inc/ExtUtils/Install.pm
No such file: inc/ExtUtils/Installed.pm
No such file: inc/ExtUtils/Manifest.pm
No such file: inc/ExtUtils/MANIFEST.SKIP
No such file: inc/ExtUtils/Packlist.pm
No such file: INSTALL
No such file: Makefile.PL
No such file: MANIFEST.SKIP
No such file: META.yml
No such file: t/lib/Test/Builder.pm
No such file: t/lib/Test/Builder/IO/Scalar.pm
No such file: t/lib/Test/Builder/Module.pm
No such file: t/lib/Test/More.pm
No such file: t/lib/Test/Simple.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
Making ExtUtils::Manifest (distclean)
Making distclean in dist/ExtUtils-Manifest
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/Manifest/extralibs.all \
core.[0-9][0-9] Manifest.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Manifest.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/Manifest/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Manifest.def core.[0-9][0-9][0-9] \
mon.out libManifest.def \
perlmain.c perl.exe \
so_locations Manifest.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/MANIFEST.SKIP ../../lib/ExtUtils/Manifest.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/ExtUtils/Manifest ../../lib/auto/ExtUtils/Manifest \
ExtUtils-Manifest-1.58 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/ExtUtils/Manifest.pm
Not in MANIFEST: lib/ExtUtils/MANIFEST.SKIP
Not in MANIFEST: t/Manifest.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
Making ExtUtils::ParseXS (distclean)
Making distclean in dist/ExtUtils-ParseXS
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/ParseXS/extralibs.all \
core.[0-9][0-9] ParseXS.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml ParseXS.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/ParseXS/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
ParseXS.def core.[0-9][0-9][0-9] \
mon.out libParseXS.def \
perlmain.c perl.exe \
so_locations ParseXS.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/ParseXS.pm ../../lib/ExtUtils/xsubpp \
Makefile.old Makefile
rm -rf \
../../lib/auto/ExtUtils/ParseXS ../../lib/auto/ExtUtils/ParseXS \
ExtUtils-ParseXS-2.2210 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/ExtUtils/ParseXS.pm
Not in MANIFEST: lib/ExtUtils/xsubpp
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/lib/IncludeTester.pm
Not in MANIFEST: t/more.t
Not in MANIFEST: t/typemap
Not in MANIFEST: t/usage.t
Not in MANIFEST: t/XSInclude.xsh
Not in MANIFEST: t/XSMore.xs
Not in MANIFEST: t/XSTest.pm
Not in MANIFEST: t/XSTest.xs
Not in MANIFEST: t/XSUsage.pm
Not in MANIFEST: t/XSUsage.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
Making File::CheckTree (distclean)
Making distclean in dist/File-CheckTree
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/File/CheckTree/extralibs.all \
core.[0-9][0-9] CheckTree.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CheckTree.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/File/CheckTree/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CheckTree.def core.[0-9][0-9][0-9] \
mon.out libCheckTree.def \
perlmain.c perl.exe \
so_locations CheckTree.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/File/CheckTree.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/File/CheckTree ../../lib/auto/File/CheckTree \
File-CheckTree-4.41 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/File/CheckTree.pm
Not in MANIFEST: t/CheckTree.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
Making File::Fetch (distclean)
Making distclean in cpan/File-Fetch
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/File/Fetch/extralibs.all \
core.[0-9][0-9] Fetch.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Fetch.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/File/Fetch/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Fetch.def core.[0-9][0-9][0-9] \
mon.out libFetch.def \
perlmain.c perl.exe \
so_locations Fetch.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Makefile.old Makefile \
../../lib/File/Fetch.pm
rm -rf \
../../lib/auto/File/Fetch ../../lib/auto/File/Fetch \
File-Fetch-0.32 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/File/Fetch.pm
Not in MANIFEST: t/01_File-Fetch.t
Not in MANIFEST: t/null_subclass.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
Making File::Path (distclean)
Making distclean in cpan/File-Path
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/File/Path/extralibs.all \
core.[0-9][0-9] Path.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Path.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/File/Path/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Path.def core.[0-9][0-9][0-9] \
mon.out libPath.def \
perlmain.c perl.exe \
so_locations Path.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/File/Path.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/File/Path ../../lib/auto/File/Path \
File-Path-2.08_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/File/Path.pm
Not in MANIFEST: t/Path.t
Not in MANIFEST: t/taint.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
Making File::Temp (distclean)
Making distclean in cpan/File-Temp
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/File/Temp/extralibs.all \
core.[0-9][0-9] Temp.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Temp.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/File/Temp/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Temp.def core.[0-9][0-9][0-9] \
mon.out libTemp.def \
perlmain.c perl.exe \
so_locations Temp.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/File/Temp.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/File/Temp ../../lib/auto/File/Temp \
File-Temp-0.22 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: t/cmp.t
Not in MANIFEST: t/fork.t
Not in MANIFEST: t/lock.t
Not in MANIFEST: t/mktemp.t
Not in MANIFEST: t/object.t
Not in MANIFEST: t/posix.t
Not in MANIFEST: t/security.t
Not in MANIFEST: t/seekable.t
Not in MANIFEST: t/tempfile.t
Not in MANIFEST: Temp.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
Making FileCache (distclean)
Making distclean in ext/FileCache
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/FileCache/extralibs.all \
core.[0-9][0-9] FileCache.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml FileCache.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/FileCache/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
FileCache.def core.[0-9][0-9][0-9] \
mon.out libFileCache.def \
perlmain.c perl.exe \
so_locations FileCache.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/FileCache.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/FileCache ../../lib/auto/FileCache \
FileCache-1.08 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/FileCache.pm
Not in MANIFEST: t/01open.t
Not in MANIFEST: t/02maxopen.t
Not in MANIFEST: t/03append.t
Not in MANIFEST: t/04twoarg.t
Not in MANIFEST: t/05override.t
Not in MANIFEST: t/06export.t
Not in MANIFEST: t/07noimport.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
Making Filter::Simple (distclean)
Making distclean in dist/Filter-Simple
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Filter/Simple/extralibs.all \
core.[0-9][0-9] Simple.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Simple.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Filter/Simple/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Simple.def core.[0-9][0-9][0-9] \
mon.out libSimple.def \
perlmain.c perl.exe \
so_locations Simple.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Filter/Simple.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Filter/Simple ../../lib/auto/Filter/Simple \
Filter-Simple-0.86 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Filter/Simple.pm
Not in MANIFEST: t/data.t
Not in MANIFEST: t/export.t
Not in MANIFEST: t/filter.t
Not in MANIFEST: t/filter_only.t
Not in MANIFEST: t/import.t
Not in MANIFEST: t/lib/Filter/Simple/ExportTest.pm
Not in MANIFEST: t/lib/Filter/Simple/FilterOnlyTest.pm
Not in MANIFEST: t/lib/Filter/Simple/FilterTest.pm
Not in MANIFEST: t/lib/Filter/Simple/ImportTest.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
Making Getopt::Long (distclean)
Making distclean in cpan/Getopt-Long
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Getopt/Long/extralibs.all \
core.[0-9][0-9] Long.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Long.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Getopt/Long/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Long.def core.[0-9][0-9][0-9] \
mon.out libLong.def \
perlmain.c perl.exe \
so_locations Long.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Getopt/Long.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Getopt/Long ../../lib/auto/Getopt/Long \
Getopt-Long-2.38 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: CHANGES
Not in MANIFEST: lib/Getopt/Long.pm
Not in MANIFEST: README
Not in MANIFEST: t/gol-basic.t
Not in MANIFEST: t/gol-compat.t
Not in MANIFEST: t/gol-linkage.t
Not in MANIFEST: t/gol-oo.t
Not in MANIFEST: t/gol-xargv.t
Not in MANIFEST: t/gol-xstring.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
Making HTTP::Tiny (distclean)
Making distclean in cpan/HTTP-Tiny
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/HTTP/Tiny/extralibs.all \
core.[0-9][0-9] Tiny.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Tiny.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/HTTP/Tiny/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Tiny.def core.[0-9][0-9][0-9] \
mon.out libTiny.def \
perlmain.c perl.exe \
so_locations Tiny.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/HTTP/Tiny.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/HTTP/Tiny ../../lib/auto/HTTP/Tiny \
HTTP-Tiny-0.012 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/HTTP/Tiny.pm
Not in MANIFEST: t/00-compile.t
Not in MANIFEST: t/000_load.t
Not in MANIFEST: t/001_api.t
Not in MANIFEST: t/002_croakage.t
Not in MANIFEST: t/010_url.t
Not in MANIFEST: t/020_headers.t
Not in MANIFEST: t/030_response.t
Not in MANIFEST: t/040_content.t
Not in MANIFEST: t/050_chunked_body.t
Not in MANIFEST: t/060_http_date.t
Not in MANIFEST: t/100_get.t
Not in MANIFEST: t/110_mirror.t
Not in MANIFEST: t/120_put.t
Not in MANIFEST: t/130_redirect.t
Not in MANIFEST: t/cases/get-01.txt
Not in MANIFEST: t/cases/get-02.txt
Not in MANIFEST: t/cases/get-03.txt
Not in MANIFEST: t/cases/get-04.txt
Not in MANIFEST: t/cases/get-05.txt
Not in MANIFEST: t/cases/get-06.txt
Not in MANIFEST: t/cases/get-07.txt
Not in MANIFEST: t/cases/get-08.txt
Not in MANIFEST: t/cases/get-09.txt
Not in MANIFEST: t/cases/get-10.txt
Not in MANIFEST: t/cases/get-11.txt
Not in MANIFEST: t/cases/get-12.txt
Not in MANIFEST: t/cases/get-13.txt
Not in MANIFEST: t/cases/get-14.txt
Not in MANIFEST: t/cases/get-15.txt
Not in MANIFEST: t/cases/get-16.txt
Not in MANIFEST: t/cases/get-17.txt
Not in MANIFEST: t/cases/get-18.txt
Not in MANIFEST: t/cases/get-19.txt
Not in MANIFEST: t/cases/get-20.txt
Not in MANIFEST: t/cases/get-21.txt
Not in MANIFEST: t/cases/mirror-01.txt
Not in MANIFEST: t/cases/mirror-02.txt
Not in MANIFEST: t/cases/mirror-03.txt
Not in MANIFEST: t/cases/mirror-04.txt
Not in MANIFEST: t/cases/mirror-05.txt
Not in MANIFEST: t/cases/put-01.txt
Not in MANIFEST: t/cases/put-02.txt
Not in MANIFEST: t/cases/put-03.txt
Not in MANIFEST: t/cases/put-04.txt
Not in MANIFEST: t/cases/put-05.txt
Not in MANIFEST: t/cases/redirect-01.txt
Not in MANIFEST: t/cases/redirect-02.txt
Not in MANIFEST: t/cases/redirect-03.txt
Not in MANIFEST: t/cases/redirect-04.txt
Not in MANIFEST: t/cases/redirect-05.txt
Not in MANIFEST: t/cases/redirect-06.txt
Not in MANIFEST: t/cases/redirect-07.txt
Not in MANIFEST: t/cases/redirect-08.txt
Not in MANIFEST: t/cases/redirect-09.txt
Not in MANIFEST: t/Util.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
Making I18N::Collate (distclean)
Making distclean in dist/I18N-Collate
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/I18N/Collate/extralibs.all \
core.[0-9][0-9] Collate.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Collate.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/I18N/Collate/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Collate.def core.[0-9][0-9][0-9] \
mon.out libCollate.def \
perlmain.c perl.exe \
so_locations Collate.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/I18N/Collate.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/I18N/Collate ../../lib/auto/I18N/Collate \
I18N-Collate-1.02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/I18N/Collate.pm
Not in MANIFEST: t/I18N-Collate.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
Making I18N::LangTags (distclean)
Making distclean in dist/I18N-LangTags
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/I18N/LangTags/extralibs.all \
core.[0-9][0-9] LangTags.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml LangTags.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/I18N/LangTags/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
LangTags.def core.[0-9][0-9][0-9] \
mon.out libLangTags.def \
perlmain.c perl.exe \
so_locations LangTags.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/I18N/LangTags/List.pm ../../lib/I18N/LangTags.pm \
../../lib/I18N/LangTags/Detect.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/I18N/LangTags ../../lib/auto/I18N/LangTags \
I18N-LangTags-0.35_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: lib/I18N/LangTags.pm
Not in MANIFEST: lib/I18N/LangTags/Detect.pm
Not in MANIFEST: lib/I18N/LangTags/List.pm
Not in MANIFEST: README
Not in MANIFEST: t/01_about_verbose.t
Not in MANIFEST: t/05_main.t
Not in MANIFEST: t/07_listy.t
Not in MANIFEST: t/10_http.t
Not in MANIFEST: t/20_locales.t
Not in MANIFEST: t/50_super.t
Not in MANIFEST: t/55_supers_strict.t
Not in MANIFEST: t/80_all_env.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
Making IO::Compress (distclean)
Making distclean in cpan/IO-Compress
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IO/Compress/extralibs.all \
core.[0-9][0-9] Compress.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Compress.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IO/Compress/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Compress.def core.[0-9][0-9][0-9] \
mon.out libCompress.def \
perlmain.c perl.exe \
so_locations Compress.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IO/Uncompress/Inflate.pm ../../lib/IO/Uncompress/AnyInflate.pm \
../../lib/IO/Uncompress/Adapter/Bunzip2.pm ../../lib/IO/Uncompress/AnyUncompress.pm \
../../lib/Compress/Zlib.pm ../../lib/IO/Compress/Gzip/Constants.pm \
Makefile.old ../../lib/IO/Uncompress/Unzip.pm \
../../lib/IO/Compress/Bzip2.pm ../../lib/IO/Uncompress/Base.pm \
../../lib/IO/Compress/Zlib/Constants.pm ../../lib/IO/Compress/Zlib/Extra.pm \
Makefile ../../lib/IO/Compress/Base/Common.pm \
../../lib/IO/Uncompress/Adapter/Inflate.pm ../../lib/IO/Compress/Adapter/Bzip2.pm \
../../lib/IO/Compress/Adapter/Identity.pm ../../lib/File/GlobMapper.pm \
../../lib/IO/Compress/RawDeflate.pm ../../lib/IO/Uncompress/RawInflate.pm \
../../lib/IO/Compress/Gzip.pm ../../lib/IO/Compress/Zip/Constants.pm \
../../lib/IO/Compress/Base.pm ../../lib/IO/Compress/Zip.pm \
../../lib/IO/Uncompress/Gunzip.pm ../../lib/IO/Uncompress/Adapter/Identity.pm \
../../lib/IO/Compress/Adapter/Deflate.pm ../../lib/IO/Uncompress/Bunzip2.pm \
../../lib/IO/Compress/Deflate.pm
rm -rf \
../../lib/auto/IO/Compress ../../lib/auto/IO/Compress \
IO-Compress-2.033
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: examples/compress-zlib/filtdef
Not in MANIFEST: examples/compress-zlib/filtinf
Not in MANIFEST: examples/compress-zlib/gzcat
Not in MANIFEST: examples/compress-zlib/gzgrep
Not in MANIFEST: examples/compress-zlib/gzstream
Not in MANIFEST: examples/io/anycat
Not in MANIFEST: examples/io/bzip2/bzcat
Not in MANIFEST: examples/io/bzip2/bzgrep
Not in MANIFEST: examples/io/bzip2/bzstream
Not in MANIFEST: examples/io/gzip/gzappend
Not in MANIFEST: examples/io/gzip/gzcat
Not in MANIFEST: examples/io/gzip/gzgrep
Not in MANIFEST: examples/io/gzip/gzstream
Not in MANIFEST: lib/Compress/Zlib.pm
Not in MANIFEST: lib/File/GlobMapper.pm
Not in MANIFEST: lib/IO/Compress/Adapter/Bzip2.pm
Not in MANIFEST: lib/IO/Compress/Adapter/Deflate.pm
Not in MANIFEST: lib/IO/Compress/Adapter/Identity.pm
Not in MANIFEST: lib/IO/Compress/Base.pm
Not in MANIFEST: lib/IO/Compress/Base/Common.pm
Not in MANIFEST: lib/IO/Compress/Bzip2.pm
Not in MANIFEST: lib/IO/Compress/Deflate.pm
Not in MANIFEST: lib/IO/Compress/Gzip.pm
Not in MANIFEST: lib/IO/Compress/Gzip/Constants.pm
Not in MANIFEST: lib/IO/Compress/RawDeflate.pm
Not in MANIFEST: lib/IO/Compress/Zip.pm
Not in MANIFEST: lib/IO/Compress/Zip/Constants.pm
Not in MANIFEST: lib/IO/Compress/Zlib/Constants.pm
Not in MANIFEST: lib/IO/Compress/Zlib/Extra.pm
Not in MANIFEST: lib/IO/Uncompress/Adapter/Bunzip2.pm
Not in MANIFEST: lib/IO/Uncompress/Adapter/Identity.pm
Not in MANIFEST: lib/IO/Uncompress/Adapter/Inflate.pm
Not in MANIFEST: lib/IO/Uncompress/AnyInflate.pm
Not in MANIFEST: lib/IO/Uncompress/AnyUncompress.pm
Not in MANIFEST: lib/IO/Uncompress/Base.pm
Not in MANIFEST: lib/IO/Uncompress/Bunzip2.pm
Not in MANIFEST: lib/IO/Uncompress/Gunzip.pm
Not in MANIFEST: lib/IO/Uncompress/Inflate.pm
Not in MANIFEST: lib/IO/Uncompress/RawInflate.pm
Not in MANIFEST: lib/IO/Uncompress/Unzip.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: pod/FAQ.pod
Not in MANIFEST: private/MakeUtil.pm
Not in MANIFEST: README
Not in MANIFEST: t/000prereq.t
Not in MANIFEST: t/001bzip2.t
Not in MANIFEST: t/001zlib-generic-deflate.t
Not in MANIFEST: t/001zlib-generic-gzip.t
Not in MANIFEST: t/001zlib-generic-rawdeflate.t
Not in MANIFEST: t/001zlib-generic-zip.t
Not in MANIFEST: t/002any-deflate.t
Not in MANIFEST: t/002any-gzip.t
Not in MANIFEST: t/002any-rawdeflate.t
Not in MANIFEST: t/002any-transparent.t
Not in MANIFEST: t/002any-zip.t
Not in MANIFEST: t/004gziphdr.t
Not in MANIFEST: t/005defhdr.t
Not in MANIFEST: t/006zip.t
Not in MANIFEST: t/010examples-bzip2.t
Not in MANIFEST: t/010examples-zlib.t
Not in MANIFEST: t/01misc.t
Not in MANIFEST: t/020isize.t
Not in MANIFEST: t/050interop-gzip.t
Not in MANIFEST: t/100generic-bzip2.t
Not in MANIFEST: t/100generic-deflate.t
Not in MANIFEST: t/100generic-gzip.t
Not in MANIFEST: t/100generic-rawdeflate.t
Not in MANIFEST: t/100generic-zip.t
Not in MANIFEST: t/101truncate-bzip2.t
Not in MANIFEST: t/101truncate-deflate.t
Not in MANIFEST: t/101truncate-gzip.t
Not in MANIFEST: t/101truncate-rawdeflate.t
Not in MANIFEST: t/101truncate-zip.t
Not in MANIFEST: t/102tied-bzip2.t
Not in MANIFEST: t/102tied-deflate.t
Not in MANIFEST: t/102tied-gzip.t
Not in MANIFEST: t/102tied-rawdeflate.t
Not in MANIFEST: t/102tied-zip.t
Not in MANIFEST: t/103newtied-bzip2.t
Not in MANIFEST: t/103newtied-deflate.t
Not in MANIFEST: t/103newtied-gzip.t
Not in MANIFEST: t/103newtied-rawdeflate.t
Not in MANIFEST: t/103newtied-zip.t
Not in MANIFEST: t/104destroy-bzip2.t
Not in MANIFEST: t/104destroy-deflate.t
Not in MANIFEST: t/104destroy-gzip.t
Not in MANIFEST: t/104destroy-rawdeflate.t
Not in MANIFEST: t/104destroy-zip.t
Not in MANIFEST: t/105oneshot-bzip2.t
Not in MANIFEST: t/105oneshot-deflate.t
Not in MANIFEST: t/105oneshot-gzip-only.t
Not in MANIFEST: t/105oneshot-gzip.t
Not in MANIFEST: t/105oneshot-rawdeflate.t
Not in MANIFEST: t/105oneshot-zip-bzip2-only.t
Not in MANIFEST: t/105oneshot-zip-only.t
Not in MANIFEST: t/105oneshot-zip.t
Not in MANIFEST: t/106prime-bzip2.t
Not in MANIFEST: t/106prime-deflate.t
Not in MANIFEST: t/106prime-gzip.t
Not in MANIFEST: t/106prime-rawdeflate.t
Not in MANIFEST: t/106prime-zip.t
Not in MANIFEST: t/107multi-bzip2.t
Not in MANIFEST: t/107multi-deflate.t
Not in MANIFEST: t/107multi-gzip.t
Not in MANIFEST: t/107multi-rawdeflate.t
Not in MANIFEST: t/107multi-zip.t
Not in MANIFEST: t/108anyunc-bzip2.t
Not in MANIFEST: t/108anyunc-deflate.t
Not in MANIFEST: t/108anyunc-gzip.t
Not in MANIFEST: t/108anyunc-rawdeflate.t
Not in MANIFEST: t/108anyunc-transparent.t
Not in MANIFEST: t/108anyunc-zip.t
Not in MANIFEST: t/109merge-deflate.t
Not in MANIFEST: t/109merge-gzip.t
Not in MANIFEST: t/109merge-rawdeflate.t
Not in MANIFEST: t/109merge-zip.t
Not in MANIFEST: t/110encode-bzip2.t
Not in MANIFEST: t/110encode-deflate.t
Not in MANIFEST: t/110encode-gzip.t
Not in MANIFEST: t/110encode-rawdeflate.t
Not in MANIFEST: t/110encode-zip.t
Not in MANIFEST: t/999pod.t
Not in MANIFEST: t/compress/any.pl
Not in MANIFEST: t/compress/anyunc.pl
Not in MANIFEST: t/compress/CompTestUtils.pm
Not in MANIFEST: t/compress/destroy.pl
Not in MANIFEST: t/compress/encode.pl
Not in MANIFEST: t/compress/generic.pl
Not in MANIFEST: t/compress/merge.pl
Not in MANIFEST: t/compress/multi.pl
Not in MANIFEST: t/compress/newtied.pl
Not in MANIFEST: t/compress/oneshot.pl
Not in MANIFEST: t/compress/prime.pl
Not in MANIFEST: t/compress/tied.pl
Not in MANIFEST: t/compress/truncate.pl
Not in MANIFEST: t/compress/zlib-generic.pl
Not in MANIFEST: t/cz-01version.t
Not in MANIFEST: t/cz-03zlib-v1.t
Not in MANIFEST: t/cz-05examples.t
Not in MANIFEST: t/cz-06gzsetp.t
Not in MANIFEST: t/cz-08encoding.t
Not in MANIFEST: t/cz-14gzopen.t
Not in MANIFEST: t/globmapper.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
Making IO::Zlib (distclean)
Making distclean in cpan/IO-Zlib
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IO/Zlib/extralibs.all \
core.[0-9][0-9] Zlib.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Zlib.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IO/Zlib/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Zlib.def core.[0-9][0-9][0-9] \
mon.out libZlib.def \
perlmain.c perl.exe \
so_locations Zlib.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IO/Zlib.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/IO/Zlib ../../lib/auto/IO/Zlib \
IO-Zlib-1.10 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/external.t
Not in MANIFEST: t/getc.t
Not in MANIFEST: t/getline.t
Not in MANIFEST: t/import.t
Not in MANIFEST: t/large.t
Not in MANIFEST: t/tied.t
Not in MANIFEST: t/uncomp1.t
Not in MANIFEST: t/uncomp2.t
Not in MANIFEST: Zlib.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
Making IPC::Cmd (distclean)
Making distclean in cpan/IPC-Cmd
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IPC/Cmd/extralibs.all \
core.[0-9][0-9] Cmd.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Cmd.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IPC/Cmd/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Cmd.def core.[0-9][0-9][0-9] \
mon.out libCmd.def \
perlmain.c perl.exe \
so_locations Cmd.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IPC/Cmd.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/IPC/Cmd ../../lib/auto/IPC/Cmd \
IPC-Cmd-0.70 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/IPC/Cmd.pm
Not in MANIFEST: t/01_IPC-Cmd.t
Not in MANIFEST: t/02_Interactive.t
Not in MANIFEST: t/src/child.pl
Not in MANIFEST: t/src/output.pl
Not in MANIFEST: t/src/x.tgz
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
Making IPC::Open2 (distclean)
Making distclean in ext/IPC-Open2
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IPC/Open2/extralibs.all \
core.[0-9][0-9] Open2.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Open2.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IPC/Open2/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Open2.def core.[0-9][0-9][0-9] \
mon.out libOpen2.def \
perlmain.c perl.exe \
so_locations Open2.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IPC/Open2.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/IPC/Open2 ../../lib/auto/IPC/Open2 \
IPC-Open2-1.03 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/IPC/Open2.pm
Not in MANIFEST: t/IPC-Open2.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
Making IPC::Open3 (distclean)
Making distclean in ext/IPC-Open3
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IPC/Open3/extralibs.all \
core.[0-9][0-9] Open3.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Open3.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IPC/Open3/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Open3.def core.[0-9][0-9][0-9] \
mon.out libOpen3.def \
perlmain.c perl.exe \
so_locations Open3.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IPC/Open3.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/IPC/Open3 ../../lib/auto/IPC/Open3 \
IPC-Open3-1.09 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/IPC/Open3.pm
Not in MANIFEST: t/fd.t
Not in MANIFEST: t/IPC-Open3.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
Making JSON::PP (distclean)
Making distclean in cpan/JSON-PP
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/JSON/PP/extralibs.all \
core.[0-9][0-9] PP.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml PP.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/JSON/PP/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
PP.def core.[0-9][0-9][0-9] \
mon.out libPP.def \
perlmain.c perl.exe \
so_locations PP.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/JSON/PP/Boolean.pm ../../lib/JSON/PP.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/JSON/PP ../../lib/auto/JSON/PP \
JSON-PP-2.27105 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bin/json_pp
Not in MANIFEST: lib/JSON/PP.pm
Not in MANIFEST: lib/JSON/PP/Boolean.pm
Not in MANIFEST: t/000_load.t
Not in MANIFEST: t/001_utf8.t
Not in MANIFEST: t/002_error.t
Not in MANIFEST: t/003_types.t
Not in MANIFEST: t/006_pc_pretty.t
Not in MANIFEST: t/007_pc_esc.t
Not in MANIFEST: t/008_pc_base.t
Not in MANIFEST: t/009_pc_extra_number.t
Not in MANIFEST: t/010_pc_keysort.t
Not in MANIFEST: t/011_pc_expo.t
Not in MANIFEST: t/012_blessed.t
Not in MANIFEST: t/013_limit.t
Not in MANIFEST: t/014_latin1.t
Not in MANIFEST: t/015_prefix.t
Not in MANIFEST: t/016_tied.t
Not in MANIFEST: t/017_relaxed.t
Not in MANIFEST: t/018_json_checker.t
Not in MANIFEST: t/019_incr.t
Not in MANIFEST: t/020_unknown.t
Not in MANIFEST: t/021_evans_bugrep.t
Not in MANIFEST: t/022_comment_at_eof.t
Not in MANIFEST: t/099_binary.t
Not in MANIFEST: t/104_sortby.t
Not in MANIFEST: t/105_esc_slash.t
Not in MANIFEST: t/106_allow_barekey.t
Not in MANIFEST: t/107_allow_singlequote.t
Not in MANIFEST: t/108_decode.t
Not in MANIFEST: t/109_encode.t
Not in MANIFEST: t/110_bignum.t
Not in MANIFEST: t/112_upgrade.t
Not in MANIFEST: t/113_overloaded_eq.t
Not in MANIFEST: t/114_decode_prefix.t
Not in MANIFEST: t/115_tie_ixhash.t
Not in MANIFEST: t/_unicode_handling.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
Making Locale::Codes (distclean)
Making distclean in cpan/Locale-Codes
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Locale/Codes/extralibs.all \
core.[0-9][0-9] Codes.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Codes.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Locale/Codes/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Codes.def core.[0-9][0-9][0-9] \
mon.out libCodes.def \
perlmain.c perl.exe \
so_locations Codes.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Locale/Language.pod ../../lib/Locale/Codes.pm \
../../lib/Locale/Script.pod ../../lib/Locale/Codes/Script.pm \
Makefile.old ../../lib/Locale/Currency.pod \
../../lib/Locale/Codes/Currency.pm ../../lib/Locale/Currency.pm \
../../lib/Locale/Country.pod ../../lib/Locale/Language.pm \
Makefile ../../lib/Locale/Codes/Country.pm \
../../lib/Locale/Constants.pod ../../lib/Locale/Constants.pm \
../../lib/Locale/Codes.pod ../../lib/Locale/Codes/Changes.pod \
../../lib/Locale/Script.pm ../../lib/Locale/Country.pm \
../../lib/Locale/Codes/Language.pm
rm -rf \
../../lib/auto/Locale/Codes ../../lib/auto/Locale/Codes \
Locale-Codes-3.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: lib/Locale/Codes.pm
Not in MANIFEST: lib/Locale/Codes.pod
Not in MANIFEST: lib/Locale/Codes/Changes.pod
Not in MANIFEST: lib/Locale/Codes/Country.pm
Not in MANIFEST: lib/Locale/Codes/Currency.pm
Not in MANIFEST: lib/Locale/Codes/Language.pm
Not in MANIFEST: lib/Locale/Codes/Script.pm
Not in MANIFEST: lib/Locale/Constants.pm
Not in MANIFEST: lib/Locale/Constants.pod
Not in MANIFEST: lib/Locale/Country.pm
Not in MANIFEST: lib/Locale/Country.pod
Not in MANIFEST: lib/Locale/Currency.pm
Not in MANIFEST: lib/Locale/Currency.pod
Not in MANIFEST: lib/Locale/Language.pm
Not in MANIFEST: lib/Locale/Language.pod
Not in MANIFEST: lib/Locale/Script.pm
Not in MANIFEST: lib/Locale/Script.pod
Not in MANIFEST: LICENSE
Not in MANIFEST: README.first
Not in MANIFEST: t/alias_code.t
Not in MANIFEST: t/code2country.t
Not in MANIFEST: t/code2currency.t
Not in MANIFEST: t/code2language.t
Not in MANIFEST: t/code2script.t
Not in MANIFEST: t/country.t
Not in MANIFEST: t/country2code.t
Not in MANIFEST: t/country_code2code.t
Not in MANIFEST: t/currency2code.t
Not in MANIFEST: t/language.t
Not in MANIFEST: t/language2code.t
Not in MANIFEST: t/script2code.t
Not in MANIFEST: t/testfunc.pl
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
Making Locale::Maketext (distclean)
Making distclean in dist/Locale-Maketext
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Locale/Maketext/extralibs.all \
core.[0-9][0-9] Maketext.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Maketext.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Locale/Maketext/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Maketext.def core.[0-9][0-9][0-9] \
mon.out libMaketext.def \
perlmain.c perl.exe \
so_locations Maketext.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Locale/Maketext/GutsLoader.pm Makefile.old \
../../lib/Locale/Maketext.pm ../../lib/Locale/Maketext/TPJ13.pod \
../../lib/Locale/Maketext/Cookbook.pod Makefile \
../../lib/Locale/Maketext/Guts.pm ../../lib/Locale/Maketext.pod
rm -rf \
../../lib/auto/Locale/Maketext ../../lib/auto/Locale/Maketext \
Locale-Maketext-1.19 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: lib/Locale/Maketext.pm
Not in MANIFEST: lib/Locale/Maketext.pod
Not in MANIFEST: lib/Locale/Maketext/Cookbook.pod
Not in MANIFEST: lib/Locale/Maketext/Guts.pm
Not in MANIFEST: lib/Locale/Maketext/GutsLoader.pm
Not in MANIFEST: lib/Locale/Maketext/TPJ13.pod
Not in MANIFEST: README
Not in MANIFEST: t/01_about_verbose.t
Not in MANIFEST: t/04_use_external_lex_cache.t
Not in MANIFEST: t/09_compile.t
Not in MANIFEST: t/10_make.t
Not in MANIFEST: t/20_get.t
Not in MANIFEST: t/30_eval_dollar_at.t
Not in MANIFEST: t/40_super.t
Not in MANIFEST: t/50_super.t
Not in MANIFEST: t/60_super.t
Not in MANIFEST: t/70_fail_auto.t
Not in MANIFEST: t/90_utf8.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
Making Locale::Maketext::Simple (distclean)
Making distclean in cpan/Locale-Maketext-Simple
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Locale/Maketext/Simple/extralibs.all \
core.[0-9][0-9] Simple.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Simple.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Locale/Maketext/Simple/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Simple.def core.[0-9][0-9][0-9] \
mon.out libSimple.def \
perlmain.c perl.exe \
so_locations Simple.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Locale/Maketext/Simple.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Locale/Maketext/Simple ../../lib/auto/Locale/Maketext/Simple \
Locale-Maketext-Simple-0.21 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Locale/Maketext/Simple.pm
Not in MANIFEST: t/0-signature.t
Not in MANIFEST: t/1-basic.t
Not in MANIFEST: t/2-load_po_without_i_default.t
Not in MANIFEST: t/3-load_po_with_i_default.t
Not in MANIFEST: t/po_with_i_default/en.po
Not in MANIFEST: t/po_with_i_default/fr.po
Not in MANIFEST: t/po_with_i_default/i_default.po
Not in MANIFEST: t/po_without_i_default/en.po
Not in MANIFEST: t/po_without_i_default/fr.po
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
Making Log::Message (distclean)
Making distclean in cpan/Log-Message
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Log/Message/extralibs.all \
core.[0-9][0-9] Message.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Message.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Log/Message/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Message.def core.[0-9][0-9][0-9] \
mon.out libMessage.def \
perlmain.c perl.exe \
so_locations Message.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Log/Message/Item.pm ../../lib/Log/Message.pm \
../../lib/Log/Message/Handlers.pm Makefile.old \
Makefile ../../lib/Log/Message/Config.pm
rm -rf \
../../lib/auto/Log/Message ../../lib/auto/Log/Message \
Log-Message-0.04 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Log/Message.pm
Not in MANIFEST: lib/Log/Message/Config.pm
Not in MANIFEST: lib/Log/Message/Handlers.pm
Not in MANIFEST: lib/Log/Message/Item.pm
Not in MANIFEST: t/01_Log-Message-Config.t
Not in MANIFEST: t/02_Log-Message.t
Not in MANIFEST: t/conf/config_file
Not in MANIFEST: t/conf/LoadMe.pl
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
Making Log::Message::Simple (distclean)
Making distclean in cpan/Log-Message-Simple
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Log/Message/Simple/extralibs.all \
core.[0-9][0-9] Simple.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Simple.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Log/Message/Simple/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Simple.def core.[0-9][0-9][0-9] \
mon.out libSimple.def \
perlmain.c perl.exe \
so_locations Simple.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Log/Message/Simple.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Log/Message/Simple ../../lib/auto/Log/Message/Simple \
Log-Message-Simple-0.08 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Log/Message/Simple.pm
Not in MANIFEST: t/01_use.t
Not in MANIFEST: t/02_imports.t
Not in MANIFEST: t/03_functions.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
Making Math::BigInt (distclean)
Making distclean in dist/Math-BigInt
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Math/BigInt/extralibs.all \
core.[0-9][0-9] BigInt.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml BigInt.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Math/BigInt/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
BigInt.def core.[0-9][0-9][0-9] \
mon.out libBigInt.def \
perlmain.c perl.exe \
so_locations BigInt.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Math/BigFloat.pm ../../lib/Math/BigInt.pm \
../../lib/Math/BigInt/Calc.pm ../../lib/Math/BigInt/CalcEmu.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Math/BigInt ../../lib/auto/Math/BigInt \
Math-BigInt-1.994 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Math/BigFloat.pm
Not in MANIFEST: lib/Math/BigInt.pm
Not in MANIFEST: lib/Math/BigInt/Calc.pm
Not in MANIFEST: lib/Math/BigInt/CalcEmu.pm
Not in MANIFEST: t/_e_math.t
Not in MANIFEST: t/alias.inc
Not in MANIFEST: t/bare_mbf.t
Not in MANIFEST: t/bare_mbi.t
Not in MANIFEST: t/bare_mif.t
Not in MANIFEST: t/big_pi_e.t
Not in MANIFEST: t/bigfltpm.inc
Not in MANIFEST: t/bigfltpm.t
Not in MANIFEST: t/bigintc.t
Not in MANIFEST: t/bigintpm.inc
Not in MANIFEST: t/bigintpm.t
Not in MANIFEST: t/bigints.t
Not in MANIFEST: t/biglog.t
Not in MANIFEST: t/bigroot.t
Not in MANIFEST: t/calling.t
Not in MANIFEST: t/config.t
Not in MANIFEST: t/const_mbf.t
Not in MANIFEST: t/constant.t
Not in MANIFEST: t/downgrade.t
Not in MANIFEST: t/inf_nan.t
Not in MANIFEST: t/isa.t
Not in MANIFEST: t/lib_load.t
Not in MANIFEST: t/Math/BigFloat/Subclass.pm
Not in MANIFEST: t/Math/BigInt/BareCalc.pm
Not in MANIFEST: t/Math/BigInt/Scalar.pm
Not in MANIFEST: t/Math/BigInt/Subclass.pm
Not in MANIFEST: t/mbf_ali.t
Not in MANIFEST: t/mbi_ali.t
Not in MANIFEST: t/mbi_rand.t
Not in MANIFEST: t/mbimbf.inc
Not in MANIFEST: t/mbimbf.t
Not in MANIFEST: t/nan_cmp.t
Not in MANIFEST: t/new_overloaded.t
Not in MANIFEST: t/req_mbf0.t
Not in MANIFEST: t/req_mbf1.t
Not in MANIFEST: t/req_mbfa.t
Not in MANIFEST: t/req_mbfi.t
Not in MANIFEST: t/req_mbfn.t
Not in MANIFEST: t/req_mbfw.t
Not in MANIFEST: t/require.t
Not in MANIFEST: t/round.t
Not in MANIFEST: t/sub_ali.t
Not in MANIFEST: t/sub_mbf.t
Not in MANIFEST: t/sub_mbi.t
Not in MANIFEST: t/sub_mif.t
Not in MANIFEST: t/trap.t
Not in MANIFEST: t/upgrade.inc
Not in MANIFEST: t/upgrade.t
Not in MANIFEST: t/upgrade2.t
Not in MANIFEST: t/upgradef.t
Not in MANIFEST: t/use.t
Not in MANIFEST: t/use_lib1.t
Not in MANIFEST: t/use_lib2.t
Not in MANIFEST: t/use_lib3.t
Not in MANIFEST: t/use_lib4.t
Not in MANIFEST: t/use_mbfw.t
Not in MANIFEST: t/with_sub.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
Making Math::BigRat (distclean)
Making distclean in dist/Math-BigRat
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Math/BigRat/extralibs.all \
core.[0-9][0-9] BigRat.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml BigRat.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Math/BigRat/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
BigRat.def core.[0-9][0-9][0-9] \
mon.out libBigRat.def \
perlmain.c perl.exe \
so_locations BigRat.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Math/BigRat.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Math/BigRat ../../lib/auto/Math/BigRat \
Math-BigRat-0.26_02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Math/BigRat.pm
Not in MANIFEST: t/big_ap.t
Not in MANIFEST: t/bigfltpm.inc
Not in MANIFEST: t/bigfltrt.t
Not in MANIFEST: t/biglog.t
Not in MANIFEST: t/bigrat.t
Not in MANIFEST: t/bigratpm.inc
Not in MANIFEST: t/bigratpm.t
Not in MANIFEST: t/bigratup.t
Not in MANIFEST: t/bigroot.t
Not in MANIFEST: t/bitwise.t
Not in MANIFEST: t/hang.t
Not in MANIFEST: t/Math/BigRat/Test.pm
Not in MANIFEST: t/requirer.t
Not in MANIFEST: t/trap.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
Making Math::Complex (distclean)
Making distclean in cpan/Math-Complex
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Math/Complex/extralibs.all \
core.[0-9][0-9] Complex.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Complex.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Math/Complex/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Complex.def core.[0-9][0-9][0-9] \
mon.out libComplex.def \
perlmain.c perl.exe \
so_locations Complex.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Math/Trig.pm ../../lib/Math/Complex.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Math/Complex ../../lib/auto/Math/Complex \
Math-Complex-1.56 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Math/Complex.pm
Not in MANIFEST: lib/Math/Trig.pm
Not in MANIFEST: t/Complex.t
Not in MANIFEST: t/Trig.t
Not in MANIFEST: t/underbar.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
Making Memoize (distclean)
Making distclean in cpan/Memoize
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Memoize/extralibs.all \
core.[0-9][0-9] Memoize.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Memoize.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Memoize/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Memoize.def core.[0-9][0-9][0-9] \
mon.out libMemoize.def \
perlmain.c perl.exe \
so_locations Memoize.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Memoize/ExpireFile.pm ../../lib/Memoize/Storable.pm \
../../lib/Memoize/ExpireTest.pm ../../lib/Memoize/SDBM_File.pm \
../../lib/Memoize/Expire.pm ../../lib/Memoize/AnyDBM_File.pm \
../../lib/Memoize.pm Makefile.old \
../../lib/Memoize/NDBM_File.pm Makefile
rm -rf \
../../lib/auto/Memoize ../../lib/auto/Memoize \
Memoize-1.02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Memoize.pm
Not in MANIFEST: Memoize/AnyDBM_File.pm
Not in MANIFEST: Memoize/Expire.pm
Not in MANIFEST: Memoize/ExpireFile.pm
Not in MANIFEST: Memoize/ExpireTest.pm
Not in MANIFEST: Memoize/NDBM_File.pm
Not in MANIFEST: Memoize/SDBM_File.pm
Not in MANIFEST: Memoize/Storable.pm
Not in MANIFEST: t/array.t
Not in MANIFEST: t/array_confusion.t
Not in MANIFEST: t/correctness.t
Not in MANIFEST: t/errors.t
Not in MANIFEST: t/expfile.t
Not in MANIFEST: t/expire.t
Not in MANIFEST: t/expmod_n.t
Not in MANIFEST: t/expmod_t.t
Not in MANIFEST: t/flush.t
Not in MANIFEST: t/normalize.t
Not in MANIFEST: t/prototype.t
Not in MANIFEST: t/speed.t
Not in MANIFEST: t/tie.t
Not in MANIFEST: t/tie_gdbm.t
Not in MANIFEST: t/tie_ndbm.t
Not in MANIFEST: t/tie_sdbm.t
Not in MANIFEST: t/tie_storable.t
Not in MANIFEST: t/tiefeatures.t
Not in MANIFEST: t/unmemoize.t
Not in MANIFEST: TODO
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
Making Module::Build (distclean)
Making distclean in cpan/Module-Build
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Build/extralibs.all \
core.[0-9][0-9] Build.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Build.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Build/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Build.def core.[0-9][0-9][0-9] \
mon.out libBuild.def \
perlmain.c perl.exe \
so_locations Build.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/inc/latest/private.pm ../../lib/Module/Build/Platform/RiscOS.pm \
../../lib/Module/Build.pm ../../lib/Module/Build/PPMMaker.pm \
../../lib/Module/Build/Authoring.pod Makefile \
../../lib/Module/Build/Platform/Amiga.pm ../../lib/Module/Build/Platform/VOS.pm \
../../lib/Module/Build/Platform/darwin.pm ../../lib/Module/Build/Bundling.pod \
../../lib/Module/Build/Platform/MacOS.pm ../../lib/Module/Build/Compat.pm \
../../lib/Module/Build/Config.pm ../../lib/Module/Build/Cookbook.pm \
../../lib/Module/Build/Platform/EBCDIC.pm ../../lib/Module/Build/Version.pm \
../../lib/Module/Build/YAML.pm ../../lib/Module/Build/Dumper.pm \
../../lib/Module/Build/ModuleInfo.pm Makefile.old \
../../lib/Module/Build/Platform/MPEiX.pm ../../lib/Module/Build/API.pod \
../../lib/Module/Build/Base.pm ../../lib/Module/Build/Platform/Default.pm \
../../lib/Module/Build/Platform/Windows.pm ../../lib/Module/Build/Platform/os2.pm \
../../lib/Module/Build/ConfigData.pm ../../lib/Module/Build/Platform/VMS.pm \
../../lib/inc/latest.pm ../../lib/Module/Build/PodParser.pm \
../../lib/Module/Build/Notes.pm ../../lib/Module/Build/Platform/Unix.pm \
../../lib/Module/Build/Platform/cygwin.pm ../../lib/Module/Build/Platform/aix.pm
rm -rf \
../../lib/auto/Module/Build ../../lib/auto/Module/Build \
Module-Build-0.3800 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bin/config_data
Not in MANIFEST: Changes
Not in MANIFEST: lib/inc/latest.pm
Not in MANIFEST: lib/inc/latest/private.pm
Not in MANIFEST: lib/Module/Build.pm
Not in MANIFEST: lib/Module/Build/API.pod
Not in MANIFEST: lib/Module/Build/Authoring.pod
Not in MANIFEST: lib/Module/Build/Base.pm
Not in MANIFEST: lib/Module/Build/Bundling.pod
Not in MANIFEST: lib/Module/Build/Compat.pm
Not in MANIFEST: lib/Module/Build/Config.pm
Not in MANIFEST: lib/Module/Build/ConfigData.pm
Not in MANIFEST: lib/Module/Build/Cookbook.pm
Not in MANIFEST: lib/Module/Build/Dumper.pm
Not in MANIFEST: lib/Module/Build/ModuleInfo.pm
Not in MANIFEST: lib/Module/Build/Notes.pm
Not in MANIFEST: lib/Module/Build/Platform/aix.pm
Not in MANIFEST: lib/Module/Build/Platform/Amiga.pm
Not in MANIFEST: lib/Module/Build/Platform/cygwin.pm
Not in MANIFEST: lib/Module/Build/Platform/darwin.pm
Not in MANIFEST: lib/Module/Build/Platform/Default.pm
Not in MANIFEST: lib/Module/Build/Platform/EBCDIC.pm
Not in MANIFEST: lib/Module/Build/Platform/MacOS.pm
Not in MANIFEST: lib/Module/Build/Platform/MPEiX.pm
Not in MANIFEST: lib/Module/Build/Platform/os2.pm
Not in MANIFEST: lib/Module/Build/Platform/RiscOS.pm
Not in MANIFEST: lib/Module/Build/Platform/Unix.pm
Not in MANIFEST: lib/Module/Build/Platform/VMS.pm
Not in MANIFEST: lib/Module/Build/Platform/VOS.pm
Not in MANIFEST: lib/Module/Build/Platform/Windows.pm
Not in MANIFEST: lib/Module/Build/PodParser.pm
Not in MANIFEST: lib/Module/Build/PPMMaker.pm
Not in MANIFEST: lib/Module/Build/Version.pm
Not in MANIFEST: lib/Module/Build/YAML.pm
Not in MANIFEST: t/00-compile.t
Not in MANIFEST: t/actions/installdeps.t
Not in MANIFEST: t/actions/manifest_skip.t
Not in MANIFEST: t/add_property.t
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/bundle_inc.t
Not in MANIFEST: t/bundled/Software/License.pm
Not in MANIFEST: t/bundled/Tie/CPHash.pm
Not in MANIFEST: t/compat.t
Not in MANIFEST: t/compat/exit.t
Not in MANIFEST: t/debug.t
Not in MANIFEST: t/destinations.t
Not in MANIFEST: t/ext.t
Not in MANIFEST: t/extend.t
Not in MANIFEST: t/files.t
Not in MANIFEST: t/help.t
Not in MANIFEST: t/install.t
Not in MANIFEST: t/install_extra_target.t
Not in MANIFEST: t/lib/DistGen.pm
Not in MANIFEST: t/lib/MBTest.pm
Not in MANIFEST: t/lib/Module/Signature.pm
Not in MANIFEST: t/lib/Software/License/VaporWare.pm
Not in MANIFEST: t/manifypods.t
Not in MANIFEST: t/metadata.t
Not in MANIFEST: t/metadata2.t
Not in MANIFEST: t/mymeta.t
Not in MANIFEST: t/new_from_context.t
Not in MANIFEST: t/notes.t
Not in MANIFEST: t/parents.t
Not in MANIFEST: t/perl_mb_opt.t
Not in MANIFEST: t/PL_files.t
Not in MANIFEST: t/pod_parser.t
Not in MANIFEST: t/ppm.t
Not in MANIFEST: t/properties/dist_suffix.t
Not in MANIFEST: t/properties/license.t
Not in MANIFEST: t/properties/module_name.t
Not in MANIFEST: t/properties/needs_compiler.t
Not in MANIFEST: t/properties/release_status.t
Not in MANIFEST: t/properties/requires.t
Not in MANIFEST: t/properties/share_dir.t
Not in MANIFEST: t/README.pod
Not in MANIFEST: t/resume.t
Not in MANIFEST: t/runthrough.t
Not in MANIFEST: t/sample.t
Not in MANIFEST: t/script_dist.t
Not in MANIFEST: t/test_file_exts.t
Not in MANIFEST: t/test_type.t
Not in MANIFEST: t/test_types.t
Not in MANIFEST: t/tilde.t
Not in MANIFEST: t/use_tap_harness.t
Not in MANIFEST: t/versions.t
Not in MANIFEST: t/write_default_maniskip.t
Not in MANIFEST: t/xs.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
Making Module::CoreList (distclean)
Making distclean in dist/Module-CoreList
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
rm -f \
blib/script/corelist
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/CoreList/extralibs.all \
core.[0-9][0-9] CoreList.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CoreList.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/CoreList/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CoreList.def core.[0-9][0-9][0-9] \
mon.out libCoreList.def \
perlmain.c perl.exe \
so_locations CoreList.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/CoreList.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/CoreList ../../lib/auto/Module/CoreList \
Module-CoreList-2.49_02
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
No such file: META.yml
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
Making Module::Load (distclean)
Making distclean in cpan/Module-Load
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Load/extralibs.all \
core.[0-9][0-9] Load.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Load.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Load/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Load.def core.[0-9][0-9][0-9] \
mon.out libLoad.def \
perlmain.c perl.exe \
so_locations Load.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/Load.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/Load ../../lib/auto/Module/Load \
Module-Load-0.18 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Module/Load.pm
Not in MANIFEST: t/01_Module-Load.t
Not in MANIFEST: t/to_load/config_file
Not in MANIFEST: t/to_load/LoadIt.pm
Not in MANIFEST: t/to_load/LoadMe.pl
Not in MANIFEST: t/to_load/Must/Be/Loaded.pm
Not in MANIFEST: t/to_load/TestModule.pm
Not in MANIFEST: t/to_load/ToBeLoaded
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
Making Module::Load::Conditional (distclean)
Making distclean in cpan/Module-Load-Conditional
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Load/Conditional/extralibs.all \
core.[0-9][0-9] Conditional.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Conditional.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Load/Conditional/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Conditional.def core.[0-9][0-9][0-9] \
mon.out libConditional.def \
perlmain.c perl.exe \
so_locations Conditional.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/Load/Conditional.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/Load/Conditional ../../lib/auto/Module/Load/Conditional \
Module-Load-Conditional-0.44 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Module/Load/Conditional.pm
Not in MANIFEST: t/01_Module_Load_Conditional.t
Not in MANIFEST: t/02_Parse_Version.t
Not in MANIFEST: t/to_load/Commented.pm
Not in MANIFEST: t/to_load/InPod.pm
Not in MANIFEST: t/to_load/LoadIt.pm
Not in MANIFEST: t/to_load/LoadMe.pl
Not in MANIFEST: t/to_load/MustBe/Loaded.pm
Not in MANIFEST: t/to_load/ToBeLoaded
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
Making Module::Loaded (distclean)
Making distclean in cpan/Module-Loaded
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Loaded/extralibs.all \
core.[0-9][0-9] Loaded.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Loaded.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Loaded/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Loaded.def core.[0-9][0-9][0-9] \
mon.out libLoaded.def \
perlmain.c perl.exe \
so_locations Loaded.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/Loaded.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/Loaded ../../lib/auto/Module/Loaded \
Module-Loaded-0.06 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Module/Loaded.pm
Not in MANIFEST: t/01_Module-Loaded.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
Making Module::Metadata (distclean)
Making distclean in cpan/Module-Metadata
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Metadata/extralibs.all \
core.[0-9][0-9] Metadata.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Metadata.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Metadata/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Metadata.def core.[0-9][0-9][0-9] \
mon.out libMetadata.def \
perlmain.c perl.exe \
so_locations Metadata.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/Metadata.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/Metadata ../../lib/auto/Module/Metadata \
Module-Metadata-1.000004 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Module/Metadata.pm
Not in MANIFEST: t/lib/DistGen.pm
Not in MANIFEST: t/lib/MBTest.pm
Not in MANIFEST: t/lib/Tie/CPHash.pm
Not in MANIFEST: t/metadata.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
Making Module::Pluggable (distclean)
Making distclean in cpan/Module-Pluggable
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Pluggable/extralibs.all \
core.[0-9][0-9] Pluggable.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Pluggable.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Pluggable/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Pluggable.def core.[0-9][0-9][0-9] \
mon.out libPluggable.def \
perlmain.c perl.exe \
so_locations Pluggable.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/Pluggable.pm ../../lib/Devel/InnerPackage.pm \
../../lib/Module/Pluggable/Object.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/Pluggable ../../lib/auto/Module/Pluggable \
Module-Pluggable-3.9 /tmp/buildd/perl-5.14.2/cpan/Module-Pluggable/t/lib/EditorJunk/Plugin/#Bar.pm# \
/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable/t/lib/OddTest/Plugin/-Dodgy.pm /tmp/buildd/perl-5.14.2/cpan/Module-Pluggable/t/lib/EditorJunk/Plugin/.#Bar.pm
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Devel/InnerPackage.pm
Not in MANIFEST: lib/Module/Pluggable.pm
Not in MANIFEST: lib/Module/Pluggable/Object.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/01use.t
Not in MANIFEST: t/02alsoworks.t
Not in MANIFEST: t/02works.t
Not in MANIFEST: t/02works_taint.t
Not in MANIFEST: t/03diffname.t
Not in MANIFEST: t/04acmedir.t
Not in MANIFEST: t/04acmedir_single.t
Not in MANIFEST: t/04acmepath.t
Not in MANIFEST: t/04acmepath_single.t
Not in MANIFEST: t/05postpath.t
Not in MANIFEST: t/06multipath.t
Not in MANIFEST: t/07instantiate.t
Not in MANIFEST: t/08nothing.t
Not in MANIFEST: t/09require.t
Not in MANIFEST: t/10innerpack.t
Not in MANIFEST: t/10innerpack_inner.t
Not in MANIFEST: t/10innerpack_noinner.t
Not in MANIFEST: t/10innerpack_onefile.t
Not in MANIFEST: t/10innerpack_override.t
Not in MANIFEST: t/10innerpack_super.t
Not in MANIFEST: t/11usetwice.t
Not in MANIFEST: t/12only.t
Not in MANIFEST: t/12onlyarray.t
Not in MANIFEST: t/12onlyregex.t
Not in MANIFEST: t/12onlyrequire.t
Not in MANIFEST: t/13except.t
Not in MANIFEST: t/13exceptarray.t
Not in MANIFEST: t/13exceptregex.t
Not in MANIFEST: t/14package.t
Not in MANIFEST: t/15topicsafe.t
Not in MANIFEST: t/16different_extension.t
Not in MANIFEST: t/17devel_inner_package.t
Not in MANIFEST: t/18skipped_package.t
Not in MANIFEST: t/19can_ok_clobber.t
Not in MANIFEST: t/20dodgy_files.t
Not in MANIFEST: t/21editor_junk.t
Not in MANIFEST: t/acme/Acme/MyTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/Acme/Foo-Bar.pm
Not in MANIFEST: t/lib/Acme/MyTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/EditorJunk/Plugin/Bar.pm
Not in MANIFEST: t/lib/EditorJunk/Plugin/Bar.pm.swo
Not in MANIFEST: t/lib/EditorJunk/Plugin/Bar.pm.swp
Not in MANIFEST: t/lib/EditorJunk/Plugin/Foo.pm
Not in MANIFEST: t/lib/ExtTest/Plugin/Bar.plugin
Not in MANIFEST: t/lib/ExtTest/Plugin/Foo.plugin
Not in MANIFEST: t/lib/ExtTest/Plugin/Quux/Foo.plugin
Not in MANIFEST: t/lib/InnerTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/MyOtherTest/Plugin/Bar.pm
Not in MANIFEST: t/lib/MyOtherTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/MyOtherTest/Plugin/Quux.pm
Not in MANIFEST: t/lib/MyOtherTest/Plugin/Quux/Foo.pm
Not in MANIFEST: t/lib/MyTest/Extend/Plugin/Bar.pm
Not in MANIFEST: t/lib/MyTest/Plugin/Bar.pm
Not in MANIFEST: t/lib/MyTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/MyTest/Plugin/Quux/Foo.pm
Not in MANIFEST: t/lib/No/Middle.pm
Not in MANIFEST: t/lib/OddTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/TA/C/A/I.pm
Not in MANIFEST: t/lib/Zot/.Zork.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
Making NEXT (distclean)
Making distclean in cpan/NEXT
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/NEXT/extralibs.all \
core.[0-9][0-9] NEXT.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml NEXT.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/NEXT/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
NEXT.def core.[0-9][0-9][0-9] \
mon.out libNEXT.def \
perlmain.c perl.exe \
so_locations NEXT.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/NEXT.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/NEXT ../../lib/auto/NEXT \
NEXT-0.65 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/NEXT.pm
Not in MANIFEST: t/actual.t
Not in MANIFEST: t/actuns.t
Not in MANIFEST: t/dynamically_scoped_regex_vars.t
Not in MANIFEST: t/next.t
Not in MANIFEST: t/stringify.t
Not in MANIFEST: t/unseen.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
Making Net::Ping (distclean)
Making distclean in dist/Net-Ping
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Net/Ping/extralibs.all \
core.[0-9][0-9] Ping.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Ping.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Net/Ping/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Ping.def core.[0-9][0-9][0-9] \
mon.out libPing.def \
perlmain.c perl.exe \
so_locations Ping.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Net/Ping.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Net/Ping ../../lib/auto/Net/Ping \
Net-Ping-2.38 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Net/Ping.pm
Not in MANIFEST: t/100_load.t
Not in MANIFEST: t/110_icmp_inst.t
Not in MANIFEST: t/120_udp_inst.t
Not in MANIFEST: t/130_tcp_inst.t
Not in MANIFEST: t/140_stream_inst.t
Not in MANIFEST: t/150_syn_inst.t
Not in MANIFEST: t/190_alarm.t
Not in MANIFEST: t/200_ping_tcp.t
Not in MANIFEST: t/250_ping_hires.t
Not in MANIFEST: t/300_ping_stream.t
Not in MANIFEST: t/400_ping_syn.t
Not in MANIFEST: t/410_syn_host.t
Not in MANIFEST: t/450_service.t
Not in MANIFEST: t/500_ping_icmp.t
Not in MANIFEST: t/510_ping_udp.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
Making Object::Accessor (distclean)
Making distclean in cpan/Object-Accessor
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Object/Accessor/extralibs.all \
core.[0-9][0-9] Accessor.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Accessor.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Object/Accessor/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Accessor.def core.[0-9][0-9][0-9] \
mon.out libAccessor.def \
perlmain.c perl.exe \
so_locations Accessor.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Object/Accessor.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Object/Accessor ../../lib/auto/Object/Accessor \
Object-Accessor-0.38 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Object/Accessor.pm
Not in MANIFEST: t/00_Object-Accessor.t
Not in MANIFEST: t/01_Object-Accessor-Subclassed.t
Not in MANIFEST: t/02_Object-Accessor-allow.t
Not in MANIFEST: t/03_Object-Accessor-local.t
Not in MANIFEST: t/04_Object-Accessor-lvalue.t
Not in MANIFEST: t/05_Object-Accessor-callback.t
Not in MANIFEST: t/06_Object-Accessor-alias.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
Making Package::Constants (distclean)
Making distclean in cpan/Package-Constants
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Package/Constants/extralibs.all \
core.[0-9][0-9] Constants.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Constants.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Package/Constants/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Constants.def core.[0-9][0-9][0-9] \
mon.out libConstants.def \
perlmain.c perl.exe \
so_locations Constants.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Package/Constants.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Package/Constants ../../lib/auto/Package/Constants \
Package-Constants-0.02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Package/Constants.pm
Not in MANIFEST: t/01_list.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
Making Params::Check (distclean)
Making distclean in cpan/Params-Check
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Params/Check/extralibs.all \
core.[0-9][0-9] Check.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Check.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Params/Check/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Check.def core.[0-9][0-9][0-9] \
mon.out libCheck.def \
perlmain.c perl.exe \
so_locations Check.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Params/Check.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Params/Check ../../lib/auto/Params/Check \
Params-Check-0.28 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Params/Check.pm
Not in MANIFEST: t/01_Params-Check.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
Making Parse::CPAN::Meta (distclean)
Making distclean in cpan/Parse-CPAN-Meta
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Parse/CPAN/Meta/extralibs.all \
core.[0-9][0-9] Meta.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Meta.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Parse/CPAN/Meta/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Meta.def core.[0-9][0-9][0-9] \
mon.out libMeta.def \
perlmain.c perl.exe \
so_locations Meta.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Parse/CPAN/Meta.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Parse/CPAN/Meta ../../lib/auto/Parse/CPAN/Meta \
Parse-CPAN-Meta-1.4401 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Parse/CPAN/Meta.pm
Not in MANIFEST: t/01_compile.t
Not in MANIFEST: t/02_api.t
Not in MANIFEST: t/03_functions.t
Not in MANIFEST: t/04_export.t
Not in MANIFEST: t/05_errors.t
Not in MANIFEST: t/data/VR-META.json
Not in MANIFEST: t/data/VR-META.yml
Not in MANIFEST: t/lib/Parse/CPAN/Meta/Test.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
Making Perl::OSType (distclean)
Making distclean in cpan/Perl-OSType
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Perl/OSType/extralibs.all \
core.[0-9][0-9] OSType.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml OSType.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Perl/OSType/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
OSType.def core.[0-9][0-9][0-9] \
mon.out libOSType.def \
perlmain.c perl.exe \
so_locations OSType.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Perl/OSType.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Perl/OSType ../../lib/auto/Perl/OSType \
Perl-OSType-1.002 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Perl/OSType.pm
Not in MANIFEST: t/00-compile.t
Not in MANIFEST: t/OSType.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
Making PerlIO::via::QuotedPrint (distclean)
Making distclean in cpan/PerlIO-via-QuotedPrint
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/PerlIO/via/QuotedPrint/extralibs.all \
core.[0-9][0-9] QuotedPrint.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml QuotedPrint.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/PerlIO/via/QuotedPrint/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
QuotedPrint.def core.[0-9][0-9][0-9] \
mon.out libQuotedPrint.def \
perlmain.c perl.exe \
so_locations QuotedPrint.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/PerlIO/via/QuotedPrint.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/PerlIO/via/QuotedPrint ../../lib/auto/PerlIO/via/QuotedPrint \
PerlIO-via-QuotedPrint-0.06 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/PerlIO/via/QuotedPrint.pm
Not in MANIFEST: t/QuotedPrint.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
Making Pod::Escapes (distclean)
Making distclean in cpan/Pod-Escapes
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/Escapes/extralibs.all \
core.[0-9][0-9] Escapes.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Escapes.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/Escapes/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Escapes.def core.[0-9][0-9][0-9] \
mon.out libEscapes.def \
perlmain.c perl.exe \
so_locations Escapes.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/Escapes.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Pod/Escapes ../../lib/auto/Pod/Escapes \
Pod-Escapes-1.04 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: lib/Pod/Escapes.pm
Not in MANIFEST: README
Not in MANIFEST: t/01_about_verbose.t
Not in MANIFEST: t/10_main.t
Not in MANIFEST: t/15_name2charnum.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
Making Pod::Html (distclean)
Making distclean in ext/Pod-Html
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
rm -f \
blib/script/pod2html
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/Html/extralibs.all \
core.[0-9][0-9] Html.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Html.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/Html/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Html.def core.[0-9][0-9][0-9] \
mon.out libHtml.def \
perlmain.c perl.exe \
so_locations Html.exp
rm -rf \
pod2html blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/Html.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Pod/Html ../../lib/auto/Pod/Html \
Pod-Html-1.11 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Html.pm
Not in MANIFEST: pod2html.PL
Not in MANIFEST: t/htmlescp.pod
Not in MANIFEST: t/htmlescp.t
Not in MANIFEST: t/htmllink.pod
Not in MANIFEST: t/htmllink.t
Not in MANIFEST: t/htmlview.pod
Not in MANIFEST: t/htmlview.t
Not in MANIFEST: t/pod2html-lib.pl
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
Making Pod::LaTeX (distclean)
Making distclean in cpan/Pod-LaTeX
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
rm -f \
blib/script/pod2latex
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/LaTeX/extralibs.all \
core.[0-9][0-9] LaTeX.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml LaTeX.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/LaTeX/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
LaTeX.def core.[0-9][0-9][0-9] \
mon.out libLaTeX.def \
perlmain.c perl.exe \
so_locations LaTeX.exp
rm -rf \
blib pod2latex
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/LaTeX.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Pod/LaTeX ../../lib/auto/Pod/LaTeX \
Pod-LaTeX-0.59 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Pod/LaTeX.pm
Not in MANIFEST: pod2latex.PL
Not in MANIFEST: t/pod2latex.t
Not in MANIFEST: t/user.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
Making Pod::Parser (distclean)
Making distclean in cpan/Pod-Parser
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
rm -f \
blib/script/podchecker blib/script/pod2usage \
blib/script/podselect
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/Parser/extralibs.all \
core.[0-9][0-9] Parser.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Parser.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/Parser/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Parser.def core.[0-9][0-9][0-9] \
mon.out libParser.def \
perlmain.c perl.exe \
so_locations Parser.exp
rm -rf \
podchecker pod2usage \
podselect blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/InputObjects.pm ../../lib/Pod/Checker.pm \
Makefile.old ../../lib/Pod/Find.pm \
../../lib/Pod/Usage.pm ../../lib/Pod/ParseUtils.pm \
../../lib/Pod/PlainText.pm Makefile \
../../lib/Pod/Select.pm ../../lib/Pod/Parser.pm
rm -rf \
../../lib/auto/Pod/Parser pod2usage.PL \
../../lib/auto/Pod/Parser podselect.PL \
podchecker.PL Pod-Parser-1.37 \
Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Pod/Checker.pm
Not in MANIFEST: lib/Pod/Find.pm
Not in MANIFEST: lib/Pod/InputObjects.pm
Not in MANIFEST: lib/Pod/Parser.pm
Not in MANIFEST: lib/Pod/ParseUtils.pm
Not in MANIFEST: lib/Pod/PlainText.pm
Not in MANIFEST: lib/Pod/Select.pm
Not in MANIFEST: lib/Pod/Usage.pm
Not in MANIFEST: scripts/pod2usage.PL
Not in MANIFEST: scripts/podchecker.PL
Not in MANIFEST: scripts/podselect.PL
Not in MANIFEST: t/pod/contains_bad_pod.xr
Not in MANIFEST: t/pod/contains_pod.t
Not in MANIFEST: t/pod/contains_pod.xr
Not in MANIFEST: t/pod/emptycmd.t
Not in MANIFEST: t/pod/emptycmd.xr
Not in MANIFEST: t/pod/find.t
Not in MANIFEST: t/pod/for.t
Not in MANIFEST: t/pod/for.xr
Not in MANIFEST: t/pod/headings.t
Not in MANIFEST: t/pod/headings.xr
Not in MANIFEST: t/pod/include.t
Not in MANIFEST: t/pod/include.xr
Not in MANIFEST: t/pod/included.t
Not in MANIFEST: t/pod/included.xr
Not in MANIFEST: t/pod/lref.t
Not in MANIFEST: t/pod/lref.xr
Not in MANIFEST: t/pod/multiline_items.t
Not in MANIFEST: t/pod/multiline_items.xr
Not in MANIFEST: t/pod/nested_items.t
Not in MANIFEST: t/pod/nested_items.xr
Not in MANIFEST: t/pod/nested_seqs.t
Not in MANIFEST: t/pod/nested_seqs.xr
Not in MANIFEST: t/pod/oneline_cmds.t
Not in MANIFEST: t/pod/oneline_cmds.xr
Not in MANIFEST: t/pod/p2u_data.pl
Not in MANIFEST: t/pod/pod2usage.t
Not in MANIFEST: t/pod/pod2usage.xr
Not in MANIFEST: t/pod/pod2usage2.t
Not in MANIFEST: t/pod/podchkenc.t
Not in MANIFEST: t/pod/podchkenc.xr
Not in MANIFEST: t/pod/poderrs.t
Not in MANIFEST: t/pod/poderrs.xr
Not in MANIFEST: t/pod/podselect.t
Not in MANIFEST: t/pod/podselect.xr
Not in MANIFEST: t/pod/special_seqs.t
Not in MANIFEST: t/pod/special_seqs.xr
Not in MANIFEST: t/pod/testcmp.pl
Not in MANIFEST: t/pod/testp2pt.pl
Not in MANIFEST: t/pod/testpchk.pl
Not in MANIFEST: t/pod/testpods/lib/Pod/Stuff.pm
Not in MANIFEST: t/pod/twice.t
Not in MANIFEST: t/pod/usage.pod
Not in MANIFEST: t/pod/usage2.pod
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
Making Pod::Perldoc (distclean)
Making distclean in dist/Pod-Perldoc
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/Perldoc/extralibs.all \
core.[0-9][0-9] Perldoc.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Perldoc.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/Perldoc/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Perldoc.def core.[0-9][0-9][0-9] \
mon.out libPerldoc.def \
perlmain.c perl.exe \
so_locations Perldoc.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/Perldoc/GetOptsOO.pm ../../lib/Pod/Perldoc/ToText.pm \
../../lib/Pod/Perldoc/ToPod.pm ../../lib/Pod/Perldoc/ToNroff.pm \
../../lib/Pod/Perldoc/ToXml.pm ../../lib/Pod/Perldoc/ToMan.pm \
Makefile.old ../../lib/Pod/Perldoc/ToRtf.pm \
../../lib/Pod/Perldoc/ToTk.pm ../../lib/Pod/Perldoc/ToChecker.pm \
../../lib/Pod/Perldoc.pm Makefile \
../../lib/Pod/Perldoc/BaseTo.pm
rm -rf \
../../lib/auto/Pod/Perldoc ../../lib/auto/Pod/Perldoc \
Pod-Perldoc-3.15_04 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Pod/Perldoc.pm
Not in MANIFEST: lib/Pod/Perldoc/BaseTo.pm
Not in MANIFEST: lib/Pod/Perldoc/GetOptsOO.pm
Not in MANIFEST: lib/Pod/Perldoc/ToChecker.pm
Not in MANIFEST: lib/Pod/Perldoc/ToMan.pm
Not in MANIFEST: lib/Pod/Perldoc/ToNroff.pm
Not in MANIFEST: lib/Pod/Perldoc/ToPod.pm
Not in MANIFEST: lib/Pod/Perldoc/ToRtf.pm
Not in MANIFEST: lib/Pod/Perldoc/ToText.pm
Not in MANIFEST: lib/Pod/Perldoc/ToTk.pm
Not in MANIFEST: lib/Pod/Perldoc/ToXml.pm
Not in MANIFEST: t/01_about_verbose.t
Not in MANIFEST: t/checkerbasic.t
Not in MANIFEST: t/perldocbasic.t
Not in MANIFEST: t/textbasic.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
Making Pod::Simple (distclean)
Making distclean in cpan/Pod-Simple
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/Simple/extralibs.all \
core.[0-9][0-9] Simple.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Simple.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/Simple/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Simple.def core.[0-9][0-9][0-9] \
mon.out libSimple.def \
perlmain.c perl.exe \
so_locations Simple.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/Simple/PullParserTextToken.pm ../../lib/Pod/Simple/PullParserStartToken.pm \
../../lib/Pod/Simple/Subclassing.pod ../../lib/Pod/Simple.pod \
../../lib/Pod/Simple/SimpleTree.pm ../../lib/Pod/Simple/DumpAsXML.pm \
../../lib/Pod/Simple/Methody.pm ../../lib/Pod/Simple/PullParserEndToken.pm \
Makefile ../../lib/Pod/Simple/Checker.pm \
../../lib/Pod/Simple/DumpAsText.pm ../../lib/Pod/Simple/Text.pm \
../../lib/Pod/Simple/Search.pm ../../lib/Pod/Simple/HTMLBatch.pm \
../../lib/Pod/Simple/Progress.pm ../../lib/Pod/Simple/XHTML.pm \
../../lib/Pod/Simple/HTMLLegacy.pm ../../lib/Pod/Simple/XMLOutStream.pm \
../../lib/Pod/Simple.pm ../../lib/Pod/Simple/Transcode.pm \
../../lib/Pod/Simple/PullParser.pm ../../lib/Pod/Simple/Debug.pm \
Makefile.old ../../lib/Pod/Simple/TranscodeSmart.pm \
../../lib/Pod/Simple/TextContent.pm ../../lib/Pod/Simple/LinkSection.pm \
../../lib/Pod/Simple/BlackBox.pm ../../lib/Pod/Simple/RTF.pm \
../../lib/Pod/Simple/TranscodeDumb.pm ../../lib/Pod/Simple/TiedOutFH.pm \
../../lib/Pod/Simple/PullParserToken.pm ../../lib/Pod/Simple/HTML.pm
rm -rf \
../../lib/auto/Pod/Simple ../../lib/auto/Pod/Simple \
Pod-Simple-3.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: lib/Pod/Simple.pm
Not in MANIFEST: lib/Pod/Simple.pod
Not in MANIFEST: lib/Pod/Simple/BlackBox.pm
Not in MANIFEST: lib/Pod/Simple/Checker.pm
Not in MANIFEST: lib/Pod/Simple/Debug.pm
Not in MANIFEST: lib/Pod/Simple/DumpAsText.pm
Not in MANIFEST: lib/Pod/Simple/DumpAsXML.pm
Not in MANIFEST: lib/Pod/Simple/HTML.pm
Not in MANIFEST: lib/Pod/Simple/HTMLBatch.pm
Not in MANIFEST: lib/Pod/Simple/HTMLLegacy.pm
Not in MANIFEST: lib/Pod/Simple/LinkSection.pm
Not in MANIFEST: lib/Pod/Simple/Methody.pm
Not in MANIFEST: lib/Pod/Simple/Progress.pm
Not in MANIFEST: lib/Pod/Simple/PullParser.pm
Not in MANIFEST: lib/Pod/Simple/PullParserEndToken.pm
Not in MANIFEST: lib/Pod/Simple/PullParserStartToken.pm
Not in MANIFEST: lib/Pod/Simple/PullParserTextToken.pm
Not in MANIFEST: lib/Pod/Simple/PullParserToken.pm
Not in MANIFEST: lib/Pod/Simple/RTF.pm
Not in MANIFEST: lib/Pod/Simple/Search.pm
Not in MANIFEST: lib/Pod/Simple/SimpleTree.pm
Not in MANIFEST: lib/Pod/Simple/Subclassing.pod
Not in MANIFEST: lib/Pod/Simple/Text.pm
Not in MANIFEST: lib/Pod/Simple/TextContent.pm
Not in MANIFEST: lib/Pod/Simple/TiedOutFH.pm
Not in MANIFEST: lib/Pod/Simple/Transcode.pm
Not in MANIFEST: lib/Pod/Simple/TranscodeDumb.pm
Not in MANIFEST: lib/Pod/Simple/TranscodeSmart.pm
Not in MANIFEST: lib/Pod/Simple/XHTML.pm
Not in MANIFEST: lib/Pod/Simple/XMLOutStream.pm
Not in MANIFEST: README
Not in MANIFEST: t/00about.t
Not in MANIFEST: t/20_skip.t
Not in MANIFEST: t/ac_d.t
Not in MANIFEST: t/accept01.t
Not in MANIFEST: t/accept05.t
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/begin.t
Not in MANIFEST: t/cbacks.t
Not in MANIFEST: t/chunking.t
Not in MANIFEST: t/closeys.t
Not in MANIFEST: t/corpus.t
Not in MANIFEST: t/corpus/2202jp.txt
Not in MANIFEST: t/corpus/2202jp.xml
Not in MANIFEST: t/corpus/2202jpx.txt
Not in MANIFEST: t/corpus/2202jpx.xml
Not in MANIFEST: t/corpus/2202jpy.txt
Not in MANIFEST: t/corpus/2202jpy.xml
Not in MANIFEST: t/corpus/2202jpz.txt
Not in MANIFEST: t/corpus/2202jpz.xml
Not in MANIFEST: t/corpus/8859_7.pod
Not in MANIFEST: t/corpus/8859_7.xml
Not in MANIFEST: t/corpus/cp1256.txt
Not in MANIFEST: t/corpus/cp1256.xml
Not in MANIFEST: t/corpus/fet_cont.txt
Not in MANIFEST: t/corpus/fet_cont.xml
Not in MANIFEST: t/corpus/fet_dup.txt
Not in MANIFEST: t/corpus/fet_dup.xml
Not in MANIFEST: t/corpus/iso6.txt
Not in MANIFEST: t/corpus/iso6.xml
Not in MANIFEST: t/corpus/koi8r.txt
Not in MANIFEST: t/corpus/koi8r.xml
Not in MANIFEST: t/corpus/laozi38.txt
Not in MANIFEST: t/corpus/laozi38.xml
Not in MANIFEST: t/corpus/laozi38b.txt
Not in MANIFEST: t/corpus/laozi38b.xml
Not in MANIFEST: t/corpus/laozi38p.pod
Not in MANIFEST: t/corpus/laozi38p.xml
Not in MANIFEST: t/corpus/lat1fr.txt
Not in MANIFEST: t/corpus/lat1fr.xml
Not in MANIFEST: t/corpus/lat1frim.txt
Not in MANIFEST: t/corpus/lat1frim.xml
Not in MANIFEST: t/corpus/nonesuch.txt
Not in MANIFEST: t/corpus/nonesuch.xml
Not in MANIFEST: t/corpus/pasternak_cp1251.txt
Not in MANIFEST: t/corpus/pasternak_cp1251.xml
Not in MANIFEST: t/corpus/plain.txt
Not in MANIFEST: t/corpus/plain.xml
Not in MANIFEST: t/corpus/plain_explicit.txt
Not in MANIFEST: t/corpus/plain_explicit.xml
Not in MANIFEST: t/corpus/plain_latin1.txt
Not in MANIFEST: t/corpus/plain_latin1.xml
Not in MANIFEST: t/corpus/plain_utf8.txt
Not in MANIFEST: t/corpus/plain_utf8.xml
Not in MANIFEST: t/corpus/polish_utf8.txt
Not in MANIFEST: t/corpus/polish_utf8.xml
Not in MANIFEST: t/corpus/s2763_sjis.txt
Not in MANIFEST: t/corpus/s2763_sjis.xml
Not in MANIFEST: t/corpus/thai_iso11.txt
Not in MANIFEST: t/corpus/thai_iso11.xml
Not in MANIFEST: t/corpus2/fiqhakbar_iso6.txt
Not in MANIFEST: t/corpus2/fiqhakbar_iso6.xml
Not in MANIFEST: t/corpus2/polish_implicit_utf8.txt
Not in MANIFEST: t/corpus2/polish_utf16be_bom.txt
Not in MANIFEST: t/corpus2/polish_utf16le_bom.txt
Not in MANIFEST: t/corpus2/polish_utf8_bom.txt
Not in MANIFEST: t/corpus2/polish_utf8_bom.xml
Not in MANIFEST: t/corpus2/polish_utf8_bom2.txt
Not in MANIFEST: t/corpus2/polish_utf8_bom2.xml
Not in MANIFEST: t/corpus2/README
Not in MANIFEST: t/encod01.t
Not in MANIFEST: t/encod02.t
Not in MANIFEST: t/encod03.t
Not in MANIFEST: t/end_over.t
Not in MANIFEST: t/fcodes.t
Not in MANIFEST: t/fcodes_e.t
Not in MANIFEST: t/fcodes_l.t
Not in MANIFEST: t/fcodes_s.t
Not in MANIFEST: t/for.t
Not in MANIFEST: t/fornot.t
Not in MANIFEST: t/heads.t
Not in MANIFEST: t/html01.t
Not in MANIFEST: t/html02.t
Not in MANIFEST: t/html03.t
Not in MANIFEST: t/htmlbat.t
Not in MANIFEST: t/items.t
Not in MANIFEST: t/items02.t
Not in MANIFEST: t/itemstar.t
Not in MANIFEST: t/junk1.pod
Not in MANIFEST: t/junk1o.txt
Not in MANIFEST: t/junk2.pod
Not in MANIFEST: t/junk2o.txt
Not in MANIFEST: t/linkclas.t
Not in MANIFEST: t/output.t
Not in MANIFEST: t/perlcyg.pod
Not in MANIFEST: t/perlcygo.txt
Not in MANIFEST: t/perlfaq.pod
Not in MANIFEST: t/perlfaqo.txt
Not in MANIFEST: t/perlvar.pod
Not in MANIFEST: t/perlvaro.txt
Not in MANIFEST: t/puller.t
Not in MANIFEST: t/pulltitl.t
Not in MANIFEST: t/reinit.t
Not in MANIFEST: t/render.t
Not in MANIFEST: t/search05.t
Not in MANIFEST: t/search10.t
Not in MANIFEST: t/search12.t
Not in MANIFEST: t/search20.t
Not in MANIFEST: t/search22.t
Not in MANIFEST: t/search25.t
Not in MANIFEST: t/search26.t
Not in MANIFEST: t/search27.t
Not in MANIFEST: t/search28.t
Not in MANIFEST: t/search29.t
Not in MANIFEST: t/search50.t
Not in MANIFEST: t/stree.t
Not in MANIFEST: t/strpvbtm.t
Not in MANIFEST: t/testlib1/Blorm.pm
Not in MANIFEST: t/testlib1/hinkhonk/Glunk.pod
Not in MANIFEST: t/testlib1/hinkhonk/readme.txt
Not in MANIFEST: t/testlib1/hinkhonk/Vliff.pm
Not in MANIFEST: t/testlib1/pod/perlflif.pod
Not in MANIFEST: t/testlib1/pod/perlthng.pod
Not in MANIFEST: t/testlib1/squaa.pm
Not in MANIFEST: t/testlib1/squaa/Glunk.pod
Not in MANIFEST: t/testlib1/squaa/Vliff.pm
Not in MANIFEST: t/testlib1/zikzik.pod
Not in MANIFEST: t/testlib1/Zonk/Fiddle.txt
Not in MANIFEST: t/testlib1/Zonk/Pronk.pm
Not in MANIFEST: t/testlib1/Zonk/Veng.pm
Not in MANIFEST: t/testlib2/hinkhonk/Glunk.pod
Not in MANIFEST: t/testlib2/hinkhonk/readme.txt
Not in MANIFEST: t/testlib2/hinkhonk/Vliff.pm
Not in MANIFEST: t/testlib2/pod/perlthng.pod
Not in MANIFEST: t/testlib2/pod/perlzuk.pod
Not in MANIFEST: t/testlib2/squaa/Vliff.pm
Not in MANIFEST: t/testlib2/squaa/Wowo.pod
Not in MANIFEST: t/testlib2/Suzzle.pm
Not in MANIFEST: t/testlib3/squaa/Vliff.pm
Not in MANIFEST: t/tiedfh.t
Not in MANIFEST: t/verb_fmt.t
Not in MANIFEST: t/verbatim.t
Not in MANIFEST: t/x_nixer.t
Not in MANIFEST: t/xhtml01.t
Not in MANIFEST: t/xhtml05.t
Not in MANIFEST: t/xhtml10.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
Making Safe (distclean)
Making distclean in dist/Safe
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Safe'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Safe/extralibs.all \
core.[0-9][0-9] Safe.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Safe.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Safe/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Safe.def core.[0-9][0-9][0-9] \
mon.out libSafe.def \
perlmain.c perl.exe \
so_locations Safe.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Safe.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Safe ../../lib/auto/Safe \
Safe-2.29
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Safe'
Making SelfLoader (distclean)
Making distclean in dist/SelfLoader
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/SelfLoader/extralibs.all \
core.[0-9][0-9] SelfLoader.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml SelfLoader.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/SelfLoader/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
SelfLoader.def core.[0-9][0-9][0-9] \
mon.out libSelfLoader.def \
perlmain.c perl.exe \
so_locations SelfLoader.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/SelfLoader.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/SelfLoader ../../lib/auto/SelfLoader \
SelfLoader-1.18 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/SelfLoader.pm
Not in MANIFEST: t/01SelfLoader.t
Not in MANIFEST: t/02SelfLoader-buggy.t
Not in MANIFEST: t/03taint.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
Making Shell (distclean)
Making distclean in cpan/Shell
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Shell/extralibs.all \
core.[0-9][0-9] Shell.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Shell.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Shell/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Shell.def core.[0-9][0-9][0-9] \
mon.out libShell.def \
perlmain.c perl.exe \
so_locations Shell.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Shell.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Shell ../../lib/auto/Shell \
Shell-0.72_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Shell.pm
Not in MANIFEST: t/Shell.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
Making Term::ANSIColor (distclean)
Making distclean in cpan/Term-ANSIColor
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Term/ANSIColor/extralibs.all \
core.[0-9][0-9] ANSIColor.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml ANSIColor.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Term/ANSIColor/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
ANSIColor.def core.[0-9][0-9][0-9] \
mon.out libANSIColor.def \
perlmain.c perl.exe \
so_locations ANSIColor.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Term/ANSIColor.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Term/ANSIColor ../../lib/auto/Term/ANSIColor \
Term-ANSIColor-3.00 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ANSIColor.pm
Not in MANIFEST: ChangeLog
Not in MANIFEST: README
Not in MANIFEST: t/basic.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
Making Term::Cap (distclean)
Making distclean in cpan/Term-Cap
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Term/Cap/extralibs.all \
core.[0-9][0-9] Cap.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Cap.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Term/Cap/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Cap.def core.[0-9][0-9][0-9] \
mon.out libCap.def \
perlmain.c perl.exe \
so_locations Cap.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Term/Cap.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Term/Cap ../../lib/auto/Term/Cap \
Term-Cap-1.12 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Cap.pm
Not in MANIFEST: test.pl
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
Making Term::UI (distclean)
Making distclean in cpan/Term-UI
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Term/UI/extralibs.all \
core.[0-9][0-9] UI.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml UI.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Term/UI/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
UI.def core.[0-9][0-9][0-9] \
mon.out libUI.def \
perlmain.c perl.exe \
so_locations UI.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Term/UI/History.pm ../../lib/Term/UI.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Term/UI ../../lib/auto/Term/UI \
Term-UI-0.26 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Term/UI.pm
Not in MANIFEST: lib/Term/UI/History.pm
Not in MANIFEST: t/00_load.t
Not in MANIFEST: t/01_history.t
Not in MANIFEST: t/02_ui.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
Making Test (distclean)
Making distclean in cpan/Test
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Test/extralibs.all \
core.[0-9][0-9] Test.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Test.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Test/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Test.def core.[0-9][0-9][0-9] \
mon.out libTest.def \
perlmain.c perl.exe \
so_locations Test.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Test.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Test ../../lib/auto/Test \
Test-1.25_02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Test.pm
Not in MANIFEST: t/05_about_verbose.t
Not in MANIFEST: t/fail.t
Not in MANIFEST: t/mix.t
Not in MANIFEST: t/multiline.t
Not in MANIFEST: t/onfail.t
Not in MANIFEST: t/qr.t
Not in MANIFEST: t/skip.t
Not in MANIFEST: t/success.t
Not in MANIFEST: t/todo.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test'
Making Test::Harness (distclean)
Making distclean in cpan/Test-Harness
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Test/Harness/extralibs.all \
core.[0-9][0-9] Harness.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Harness.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Test/Harness/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Harness.def core.[0-9][0-9][0-9] \
mon.out libHarness.def \
perlmain.c perl.exe \
so_locations Harness.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/TAP/Parser/Result/Comment.pm ../../lib/TAP/Parser/Result/Test.pm \
../../lib/TAP/Parser.pm ../../lib/TAP/Parser/Result/Version.pm \
../../lib/Test/Harness.pm ../../lib/TAP/Parser/SourceHandler/Executable.pm \
../../lib/TAP/Parser/IteratorFactory.pm ../../lib/TAP/Parser/Iterator/Array.pm \
../../lib/TAP/Parser/Scheduler/Spinner.pm ../../lib/TAP/Parser/Scheduler/Job.pm \
../../lib/TAP/Formatter/Session.pm ../../lib/TAP/Parser/Iterator/Stream.pm \
../../lib/TAP/Parser/YAMLish/Reader.pm ../../lib/TAP/Parser/Source.pm \
Makefile ../../lib/TAP/Formatter/Console/ParallelSession.pm \
../../lib/TAP/Parser/Grammar.pm ../../lib/TAP/Parser/SourceHandler/Perl.pm \
../../lib/TAP/Parser/Iterator/Process.pm ../../lib/TAP/Parser/SourceHandler/Handle.pm \
../../lib/TAP/Formatter/Console/Session.pm ../../lib/TAP/Parser/Result/YAML.pm \
../../lib/TAP/Parser/Result/Bailout.pm ../../lib/TAP/Parser/ResultFactory.pm \
../../lib/TAP/Parser/Utils.pm ../../lib/TAP/Parser/Aggregator.pm \
../../lib/TAP/Base.pm ../../lib/TAP/Parser/YAMLish/Writer.pm \
Makefile.old ../../lib/TAP/Harness.pm \
../../lib/TAP/Harness/Beyond.pod ../../lib/TAP/Parser/Multiplexer.pm \
../../lib/TAP/Parser/Result/Unknown.pm ../../lib/TAP/Parser/SourceHandler/File.pm \
../../lib/TAP/Parser/Iterator.pm ../../lib/App/Prove/State/Result.pm \
../../lib/TAP/Formatter/File/Session.pm ../../lib/TAP/Parser/Result/Pragma.pm \
../../lib/App/Prove.pm ../../lib/TAP/Formatter/Base.pm \
../../lib/TAP/Parser/Scheduler.pm ../../lib/App/Prove/State/Result/Test.pm \
../../lib/TAP/Formatter/Color.pm ../../lib/TAP/Parser/Result.pm \
../../lib/TAP/Formatter/Console.pm ../../lib/TAP/Formatter/File.pm \
../../lib/TAP/Parser/SourceHandler/RawTAP.pm ../../lib/TAP/Parser/SourceHandler.pm \
../../lib/App/Prove/State.pm ../../lib/TAP/Parser/Result/Plan.pm \
../../lib/TAP/Object.pm
rm -rf \
../../lib/auto/Test/Harness ../../lib/auto/Test/Harness \
Test-Harness-3.23 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
No such file: Changes-2.64
No such file: examples/analyze_tests.pl
No such file: examples/bin/forked_tests.pl
No such file: examples/bin/test_html.pl
No such file: examples/bin/tprove_gtk
No such file: examples/harness-hook/hook.pl
No such file: examples/harness-hook/lib/Harness/Hook.pm
No such file: examples/my_exec
No such file: examples/README
No such file: examples/silent-harness.pl
No such file: examples/t/10-stuff.t
No such file: examples/t/ruby.t
No such file: examples/test_urls.txt
No such file: HACKING.pod
No such file: inc/MyBuilder.pm
No such file: Makefile.PL
No such file: META.yml
No such file: NotBuild.PL
No such file: perlcriticrc
No such file: README
No such file: t/lib/if.pm
No such file: t/lib/Test/Builder.pm
No such file: t/lib/Test/Builder/Module.pm
No such file: t/lib/Test/More.pm
No such file: t/lib/Test/Simple.pm
No such file: xt/author/pod-coverage.t
No such file: xt/author/pod.t
No such file: xt/author/stdin.t
No such file: xt/perls/harness_perl.t
No such file: xt/perls/sample-tests/perl_version
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
Making Test::Simple (distclean)
Making distclean in cpan/Test-Simple
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Test/Simple/extralibs.all \
core.[0-9][0-9] Simple.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Simple.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Test/Simple/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Simple.def core.[0-9][0-9][0-9] \
mon.out libSimple.def \
perlmain.c perl.exe \
so_locations Simple.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Test/Builder/Tester/Color.pm ../../lib/Test/Builder/Tester.pm \
../../lib/Test/More.pm ../../lib/Test/Builder.pm \
Makefile.old ../../lib/Test/Simple.pm \
../../lib/Test/Tutorial.pod Makefile \
../../lib/Test/Builder/Module.pm
rm -rf \
../../lib/auto/Test/Simple ../../lib/auto/Test/Simple \
Test-Simple-0.98 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: examples/indent.pl
Not in MANIFEST: examples/subtest.t
Not in MANIFEST: lib/Test/Builder.pm
Not in MANIFEST: lib/Test/Builder/Module.pm
Not in MANIFEST: lib/Test/Builder/Tester.pm
Not in MANIFEST: lib/Test/Builder/Tester/Color.pm
Not in MANIFEST: lib/Test/More.pm
Not in MANIFEST: lib/Test/Simple.pm
Not in MANIFEST: lib/Test/Tutorial.pod
Not in MANIFEST: README
Not in MANIFEST: t/00test_harness_check.t
Not in MANIFEST: t/bad_plan.t
Not in MANIFEST: t/bail_out.t
Not in MANIFEST: t/BEGIN_require_ok.t
Not in MANIFEST: t/BEGIN_use_ok.t
Not in MANIFEST: t/buffer.t
Not in MANIFEST: t/Builder/Builder.t
Not in MANIFEST: t/Builder/carp.t
Not in MANIFEST: t/Builder/create.t
Not in MANIFEST: t/Builder/current_test.t
Not in MANIFEST: t/Builder/current_test_without_plan.t
Not in MANIFEST: t/Builder/details.t
Not in MANIFEST: t/Builder/done_testing.t
Not in MANIFEST: t/Builder/done_testing_double.t
Not in MANIFEST: t/Builder/done_testing_plan_mismatch.t
Not in MANIFEST: t/Builder/done_testing_with_no_plan.t
Not in MANIFEST: t/Builder/done_testing_with_number.t
Not in MANIFEST: t/Builder/done_testing_with_plan.t
Not in MANIFEST: t/Builder/fork_with_new_stdout.t
Not in MANIFEST: t/Builder/has_plan.t
Not in MANIFEST: t/Builder/has_plan2.t
Not in MANIFEST: t/Builder/is_fh.t
Not in MANIFEST: t/Builder/is_passing.t
Not in MANIFEST: t/Builder/maybe_regex.t
Not in MANIFEST: t/Builder/no_diag.t
Not in MANIFEST: t/Builder/no_ending.t
Not in MANIFEST: t/Builder/no_header.t
Not in MANIFEST: t/Builder/no_plan_at_all.t
Not in MANIFEST: t/Builder/ok_obj.t
Not in MANIFEST: t/Builder/output.t
Not in MANIFEST: t/Builder/reset.t
Not in MANIFEST: t/Builder/try.t
Not in MANIFEST: t/c_flag.t
Not in MANIFEST: t/circular_data.t
Not in MANIFEST: t/cmp_ok.t
Not in MANIFEST: t/dependents.t
Not in MANIFEST: t/diag.t
Not in MANIFEST: t/died.t
Not in MANIFEST: t/dont_overwrite_die_handler.t
Not in MANIFEST: t/eq_set.t
Not in MANIFEST: t/exit.t
Not in MANIFEST: t/explain.t
Not in MANIFEST: t/extra.t
Not in MANIFEST: t/extra_one.t
Not in MANIFEST: t/fail-like.t
Not in MANIFEST: t/fail-more.t
Not in MANIFEST: t/fail.t
Not in MANIFEST: t/fail_one.t
Not in MANIFEST: t/filehandles.t
Not in MANIFEST: t/fork.t
Not in MANIFEST: t/harness_active.t
Not in MANIFEST: t/import.t
Not in MANIFEST: t/is_deeply_dne_bug.t
Not in MANIFEST: t/is_deeply_fail.t
Not in MANIFEST: t/is_deeply_with_threads.t
Not in MANIFEST: t/lib/Dev/Null.pm
Not in MANIFEST: t/lib/Dummy.pm
Not in MANIFEST: t/lib/MyOverload.pm
Not in MANIFEST: t/lib/NoExporter.pm
Not in MANIFEST: t/lib/SigDie.pm
Not in MANIFEST: t/lib/Test/Builder/NoOutput.pm
Not in MANIFEST: t/lib/Test/Simple/Catch.pm
Not in MANIFEST: t/lib/Test/Simple/sample_tests/death.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/death_in_eval.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/death_with_handler.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/exit.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/extras.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/five_fail.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/last_minute_death.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/one_fail.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/pre_plan_death.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/require.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/success.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/too_few.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/too_few_fail.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/two_fail.plx
Not in MANIFEST: t/lib/TieOut.pm
Not in MANIFEST: t/missing.t
Not in MANIFEST: t/More.t
Not in MANIFEST: t/new_ok.t
Not in MANIFEST: t/no_plan.t
Not in MANIFEST: t/no_tests.t
Not in MANIFEST: t/note.t
Not in MANIFEST: t/overload.t
Not in MANIFEST: t/overload_threads.t
Not in MANIFEST: t/plan.t
Not in MANIFEST: t/plan_bad.t
Not in MANIFEST: t/plan_is_noplan.t
Not in MANIFEST: t/plan_no_plan.t
Not in MANIFEST: t/plan_shouldnt_import.t
Not in MANIFEST: t/plan_skip_all.t
Not in MANIFEST: t/require_ok.t
Not in MANIFEST: t/simple.t
Not in MANIFEST: t/Simple/load.t
Not in MANIFEST: t/skip.t
Not in MANIFEST: t/skipall.t
Not in MANIFEST: t/subtest/args.t
Not in MANIFEST: t/subtest/basic.t
Not in MANIFEST: t/subtest/die.t
Not in MANIFEST: t/subtest/do.t
Not in MANIFEST: t/subtest/exceptions.t
Not in MANIFEST: t/subtest/for_do_t.test
Not in MANIFEST: t/subtest/fork.t
Not in MANIFEST: t/subtest/implicit_done.t
Not in MANIFEST: t/subtest/line_numbers.t
Not in MANIFEST: t/subtest/plan.t
Not in MANIFEST: t/subtest/predicate.t
Not in MANIFEST: t/subtest/singleton.t
Not in MANIFEST: t/subtest/todo.t
Not in MANIFEST: t/subtest/wstat.t
Not in MANIFEST: t/tbm_doesnt_set_exported_to.t
Not in MANIFEST: t/Tester/tbt_01basic.t
Not in MANIFEST: t/Tester/tbt_02fhrestore.t
Not in MANIFEST: t/Tester/tbt_03die.t
Not in MANIFEST: t/Tester/tbt_04line_num.t
Not in MANIFEST: t/Tester/tbt_05faildiag.t
Not in MANIFEST: t/Tester/tbt_06errormess.t
Not in MANIFEST: t/Tester/tbt_07args.t
Not in MANIFEST: t/thread_taint.t
Not in MANIFEST: t/threads.t
Not in MANIFEST: t/todo.t
Not in MANIFEST: t/undef.t
Not in MANIFEST: t/use_ok.t
Not in MANIFEST: t/useing.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: t/versions.t
Not in MANIFEST: TODO
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
Making Text::Balanced (distclean)
Making distclean in cpan/Text-Balanced
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Text/Balanced/extralibs.all \
core.[0-9][0-9] Balanced.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Balanced.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Text/Balanced/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Balanced.def core.[0-9][0-9][0-9] \
mon.out libBalanced.def \
perlmain.c perl.exe \
so_locations Balanced.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Text/Balanced.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Text/Balanced ../../lib/auto/Text/Balanced \
Text-Balanced-2.02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Text/Balanced.pm
Not in MANIFEST: README
Not in MANIFEST: t/01_compile.t
Not in MANIFEST: t/02_extbrk.t
Not in MANIFEST: t/03_extcbk.t
Not in MANIFEST: t/04_extdel.t
Not in MANIFEST: t/05_extmul.t
Not in MANIFEST: t/06_extqlk.t
Not in MANIFEST: t/07_exttag.t
Not in MANIFEST: t/08_extvar.t
Not in MANIFEST: t/09_gentag.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
Making Text::ParseWords (distclean)
Making distclean in cpan/Text-ParseWords
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Text/ParseWords/extralibs.all \
core.[0-9][0-9] ParseWords.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml ParseWords.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Text/ParseWords/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
ParseWords.def core.[0-9][0-9][0-9] \
mon.out libParseWords.def \
perlmain.c perl.exe \
so_locations ParseWords.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Makefile.old Makefile \
../../lib/Text/ParseWords.pm
rm -rf \
../../lib/auto/Text/ParseWords ../../lib/auto/Text/ParseWords \
Text-ParseWords-3.27 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Text/ParseWords.pm
Not in MANIFEST: t/ParseWords.t
Not in MANIFEST: t/taint.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
Making Text::Tabs (distclean)
Making distclean in cpan/Text-Tabs
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Text/Tabs/extralibs.all \
core.[0-9][0-9] Tabs.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Tabs.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Text/Tabs/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Tabs.def core.[0-9][0-9][0-9] \
mon.out libTabs.def \
perlmain.c perl.exe \
so_locations Tabs.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Text/Wrap.pm ../../lib/Text/Tabs.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Text/Tabs ../../lib/auto/Text/Tabs \
Text-Tabs-2009.0305 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: CHANGELOG
Not in MANIFEST: lib/Text/Tabs.pm
Not in MANIFEST: lib/Text/Wrap.pm
Not in MANIFEST: t/37000.t
Not in MANIFEST: t/39548.t
Not in MANIFEST: t/belg4mit.t
Not in MANIFEST: t/dandv.t
Not in MANIFEST: t/fill.t
Not in MANIFEST: t/Jacobson.t
Not in MANIFEST: t/Jacobson2.t
Not in MANIFEST: t/Jochen.t
Not in MANIFEST: t/sep.t
Not in MANIFEST: t/sep2.t
Not in MANIFEST: t/tabs.t
Not in MANIFEST: t/wrap.t
Not in MANIFEST: t/wrap_separator2.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
Making Thread::Queue (distclean)
Making distclean in dist/Thread-Queue
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Thread/Queue/extralibs.all \
core.[0-9][0-9] Queue.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Queue.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Thread/Queue/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Queue.def core.[0-9][0-9][0-9] \
mon.out libQueue.def \
perlmain.c perl.exe \
so_locations Queue.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Thread/Queue.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Thread/Queue ../../lib/auto/Thread/Queue \
Thread-Queue-2.12 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Thread/Queue.pm
Not in MANIFEST: t/01_basic.t
Not in MANIFEST: t/02_refs.t
Not in MANIFEST: t/03_peek.t
Not in MANIFEST: t/04_errs.t
Not in MANIFEST: t/05_extract.t
Not in MANIFEST: t/06_insert.t
Not in MANIFEST: t/07_lock.t
Not in MANIFEST: t/08_nothreads.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
Making Thread::Semaphore (distclean)
Making distclean in dist/Thread-Semaphore
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Thread/Semaphore/extralibs.all \
core.[0-9][0-9] Semaphore.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Semaphore.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Thread/Semaphore/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Semaphore.def core.[0-9][0-9][0-9] \
mon.out libSemaphore.def \
perlmain.c perl.exe \
so_locations Semaphore.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Thread/Semaphore.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Thread/Semaphore ../../lib/auto/Thread/Semaphore \
Thread-Semaphore-2.12 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Thread/Semaphore.pm
Not in MANIFEST: t/01_basic.t
Not in MANIFEST: t/02_errs.t
Not in MANIFEST: t/03_nothreads.t
Not in MANIFEST: t/04_nonblocking.t
Not in MANIFEST: t/05_force.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
Making Tie::File (distclean)
Making distclean in cpan/Tie-File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Tie/File/extralibs.all \
core.[0-9][0-9] File.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml File.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Tie/File/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
File.def core.[0-9][0-9][0-9] \
mon.out libFile.def \
perlmain.c perl.exe \
so_locations File.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Tie/File.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Tie/File ../../lib/auto/Tie/File \
Tie-File-0.97_02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Tie/File.pm
Not in MANIFEST: t/00_version.t
Not in MANIFEST: t/01_gen.t
Not in MANIFEST: t/02_fetchsize.t
Not in MANIFEST: t/03_longfetch.t
Not in MANIFEST: t/04_splice.t
Not in MANIFEST: t/05_size.t
Not in MANIFEST: t/06_fixrec.t
Not in MANIFEST: t/07_rv_splice.t
Not in MANIFEST: t/08_ro.t
Not in MANIFEST: t/09_gen_rs.t
Not in MANIFEST: t/10_splice_rs.t
Not in MANIFEST: t/11_rv_splice_rs.t
Not in MANIFEST: t/12_longfetch_rs.t
Not in MANIFEST: t/13_size_rs.t
Not in MANIFEST: t/14_lock.t
Not in MANIFEST: t/15_pushpop.t
Not in MANIFEST: t/16_handle.t
Not in MANIFEST: t/17_misc_meth.t
Not in MANIFEST: t/18_rs_fixrec.t
Not in MANIFEST: t/19_cache.t
Not in MANIFEST: t/20_cache_full.t
Not in MANIFEST: t/21_win32.t
Not in MANIFEST: t/22_autochomp.t
Not in MANIFEST: t/23_rv_ac_splice.t
Not in MANIFEST: t/24_cache_loop.t
Not in MANIFEST: t/25_gen_nocache.t
Not in MANIFEST: t/26_twrite.t
Not in MANIFEST: t/27_iwrite.t
Not in MANIFEST: t/28_mtwrite.t
Not in MANIFEST: t/29_downcopy.t
Not in MANIFEST: t/29a_upcopy.t
Not in MANIFEST: t/30_defer.t
Not in MANIFEST: t/31_autodefer.t
Not in MANIFEST: t/32_defer_misc.t
Not in MANIFEST: t/33_defer_vs.t
Not in MANIFEST: t/40_abs_cache.t
Not in MANIFEST: t/41_heap.t
Not in MANIFEST: t/42_offset.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
Making Tie::Memoize (distclean)
Making distclean in ext/Tie-Memoize
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Tie/Memoize/extralibs.all \
core.[0-9][0-9] Memoize.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Memoize.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Tie/Memoize/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Memoize.def core.[0-9][0-9][0-9] \
mon.out libMemoize.def \
perlmain.c perl.exe \
so_locations Memoize.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Makefile.old Makefile \
../../lib/Tie/Memoize.pm
rm -rf \
../../lib/auto/Tie/Memoize ../../lib/auto/Tie/Memoize \
Tie-Memoize-1.1 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Tie/Memoize.pm
Not in MANIFEST: t/Tie-Memoize.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
Making Tie::RefHash (distclean)
Making distclean in cpan/Tie-RefHash
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Tie/RefHash/extralibs.all \
core.[0-9][0-9] RefHash.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml RefHash.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Tie/RefHash/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
RefHash.def core.[0-9][0-9][0-9] \
mon.out libRefHash.def \
perlmain.c perl.exe \
so_locations RefHash.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Tie/RefHash.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Tie/RefHash ../../lib/auto/Tie/RefHash \
Tie-RefHash-1.39 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Tie/RefHash.pm
Not in MANIFEST: t/rebless.t
Not in MANIFEST: t/refhash.t
Not in MANIFEST: t/storable.t
Not in MANIFEST: t/threaded.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
Making Time::Local (distclean)
Making distclean in cpan/Time-Local
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Time/Local/extralibs.all \
core.[0-9][0-9] Local.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Local.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Time/Local/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Local.def core.[0-9][0-9][0-9] \
mon.out libLocal.def \
perlmain.c perl.exe \
so_locations Local.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Time/Local.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Time/Local ../../lib/auto/Time/Local \
Time-Local-1.2000 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Time/Local.pm
Not in MANIFEST: t/Local.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
Making Version::Requirements (distclean)
Making distclean in cpan/Version-Requirements
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Version/Requirements/extralibs.all \
core.[0-9][0-9] Requirements.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Requirements.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Version/Requirements/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Requirements.def core.[0-9][0-9][0-9] \
mon.out libRequirements.def \
perlmain.c perl.exe \
so_locations Requirements.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Version/Requirements.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Version/Requirements ../../lib/auto/Version/Requirements \
Version-Requirements-0.101020 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Version/Requirements.pm
Not in MANIFEST: t/accepts.t
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/finalize.t
Not in MANIFEST: t/from-hash.t
Not in MANIFEST: t/merge.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
Making XSLoader (distclean)
Making distclean in dist/XSLoader
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/XSLoader/extralibs.all \
core.[0-9][0-9] XSLoader.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml XSLoader.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/XSLoader/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
XSLoader.def core.[0-9][0-9][0-9] \
mon.out libXSLoader.def \
perlmain.c perl.exe \
so_locations XSLoader.exp
rm -rf \
XSLoader.pm XSLoader-* \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/XSLoader.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/XSLoader ../../lib/auto/XSLoader \
XSLoader-0.13
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/XSLoader.t
Not in MANIFEST: XSLoader_pm.PL
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
Making autodie (distclean)
Making distclean in cpan/autodie
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/autodie/extralibs.all \
core.[0-9][0-9] autodie.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml autodie.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/autodie/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
autodie.def core.[0-9][0-9][0-9] \
mon.out libautodie.def \
perlmain.c perl.exe \
so_locations autodie.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/autodie.pm ../../lib/autodie/exception.pm \
../../lib/Fatal.pm ../../lib/autodie/exception/system.pm \
../../lib/autodie/hints.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/autodie ../../lib/auto/autodie \
autodie-2.1001 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/autodie.pm
Not in MANIFEST: lib/autodie/exception.pm
Not in MANIFEST: lib/autodie/exception/system.pm
Not in MANIFEST: lib/autodie/hints.pm
Not in MANIFEST: lib/Fatal.pm
Not in MANIFEST: t/00-load.t
Not in MANIFEST: t/autodie.t
Not in MANIFEST: t/autodie_test_module.pm
Not in MANIFEST: t/backcompat.t
Not in MANIFEST: t/basic_exceptions.t
Not in MANIFEST: t/binmode.t
Not in MANIFEST: t/blog_hints.t
Not in MANIFEST: t/caller.t
Not in MANIFEST: t/context.t
Not in MANIFEST: t/context_lexical.t
Not in MANIFEST: t/crickey.t
Not in MANIFEST: t/dbmopen.t
Not in MANIFEST: t/eval_error.t
Not in MANIFEST: t/exception_class.t
Not in MANIFEST: t/exceptions.t
Not in MANIFEST: t/exec.t
Not in MANIFEST: t/Fatal.t
Not in MANIFEST: t/filehandles.t
Not in MANIFEST: t/fileno.t
Not in MANIFEST: t/flock.t
Not in MANIFEST: t/format-clobber.t
Not in MANIFEST: t/hints.t
Not in MANIFEST: t/hints_insist.t
Not in MANIFEST: t/hints_pod_examples.t
Not in MANIFEST: t/hints_provider_does.t
Not in MANIFEST: t/hints_provider_easy_does_it.t
Not in MANIFEST: t/hints_provider_isa.t
Not in MANIFEST: t/internal-backcompat.t
Not in MANIFEST: t/internal.t
Not in MANIFEST: t/lethal.t
Not in MANIFEST: t/lib/autodie/test/au.pm
Not in MANIFEST: t/lib/autodie/test/au/exception.pm
Not in MANIFEST: t/lib/autodie/test/badname.pm
Not in MANIFEST: t/lib/autodie/test/missing.pm
Not in MANIFEST: t/lib/Caller_helper.pm
Not in MANIFEST: t/lib/Hints_pod_examples.pm
Not in MANIFEST: t/lib/Hints_provider_does.pm
Not in MANIFEST: t/lib/Hints_provider_easy_does_it.pm
Not in MANIFEST: t/lib/Hints_provider_isa.pm
Not in MANIFEST: t/lib/Hints_test.pm
Not in MANIFEST: t/lib/lethal.pm
Not in MANIFEST: t/lib/my/autodie.pm
Not in MANIFEST: t/lib/OtherTypes.pm
Not in MANIFEST: t/lib/pujHa/ghach.pm
Not in MANIFEST: t/lib/pujHa/ghach/Dotlh.pm
Not in MANIFEST: t/lib/Some/Module.pm
Not in MANIFEST: t/mkdir.t
Not in MANIFEST: t/open.t
Not in MANIFEST: t/recv.t
Not in MANIFEST: t/repeat.t
Not in MANIFEST: t/scope_leak.t
Not in MANIFEST: t/string-eval-basic.t
Not in MANIFEST: t/string-eval-leak.t
Not in MANIFEST: t/sysopen.t
Not in MANIFEST: t/truncate.t
Not in MANIFEST: t/unlink.t
Not in MANIFEST: t/user-context.t
Not in MANIFEST: t/usersub.t
Not in MANIFEST: t/version.t
Not in MANIFEST: t/version_tag.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
Making autouse (distclean)
Making distclean in dist/autouse
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/autouse'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/autouse/extralibs.all \
core.[0-9][0-9] autouse.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml autouse.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/autouse/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
autouse.def core.[0-9][0-9][0-9] \
mon.out libautouse.def \
perlmain.c perl.exe \
so_locations autouse.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/autouse.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/autouse ../../lib/auto/autouse \
autouse-1.06 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/autouse.pm
Not in MANIFEST: t/autouse.t
Not in MANIFEST: t/lib/MyTestModule.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/autouse'
Making base (distclean)
Making distclean in dist/base
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/base'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/base/extralibs.all \
core.[0-9][0-9] base.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml base.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/base/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
base.def core.[0-9][0-9][0-9] \
mon.out libbase.def \
perlmain.c perl.exe \
so_locations base.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/fields.pm Makefile.old \
Makefile ../../lib/base.pm
rm -rf \
../../lib/auto/base ../../lib/auto/base \
base-2.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
No such file: Makefile.PL
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/base'
Making bignum (distclean)
Making distclean in dist/bignum
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/bignum'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/bignum/extralibs.all \
core.[0-9][0-9] bignum.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml bignum.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/bignum/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
bignum.def core.[0-9][0-9][0-9] \
mon.out libbignum.def \
perlmain.c perl.exe \
so_locations bignum.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/bigrat.pm ../../lib/Math/BigInt/Trace.pm \
../../lib/Math/BigFloat/Trace.pm ../../lib/bigint.pm \
../../lib/bignum.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/bignum ../../lib/auto/bignum \
bignum-0.27 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/bigint.pm
Not in MANIFEST: lib/bignum.pm
Not in MANIFEST: lib/bigrat.pm
Not in MANIFEST: lib/Math/BigFloat/Trace.pm
Not in MANIFEST: lib/Math/BigInt/Trace.pm
Not in MANIFEST: t/big_e_pi.t
Not in MANIFEST: t/bigexp.t
Not in MANIFEST: t/bigint.t
Not in MANIFEST: t/bignum.t
Not in MANIFEST: t/bigrat.t
Not in MANIFEST: t/bii_e_pi.t
Not in MANIFEST: t/biinfnan.t
Not in MANIFEST: t/bir_e_pi.t
Not in MANIFEST: t/bn_lite.t
Not in MANIFEST: t/bninfnan.t
Not in MANIFEST: t/br_lite.t
Not in MANIFEST: t/brinfnan.t
Not in MANIFEST: t/in_effect.t
Not in MANIFEST: t/infnan.inc
Not in MANIFEST: t/option_a.t
Not in MANIFEST: t/option_l.t
Not in MANIFEST: t/option_p.t
Not in MANIFEST: t/ratopt_a.t
Not in MANIFEST: t/scope_f.t
Not in MANIFEST: t/scope_i.t
Not in MANIFEST: t/scope_r.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/bignum'
Making constant (distclean)
Making distclean in dist/constant
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/constant'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/constant/extralibs.all \
core.[0-9][0-9] constant.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml constant.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/constant/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
constant.def core.[0-9][0-9][0-9] \
mon.out libconstant.def \
perlmain.c perl.exe \
so_locations constant.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/constant.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/constant ../../lib/auto/constant \
constant-1.21 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/constant.pm
Not in MANIFEST: t/constant.t
Not in MANIFEST: t/utf8.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/constant'
Making encoding::warnings (distclean)
Making distclean in cpan/encoding-warnings
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/encoding/warnings/extralibs.all \
core.[0-9][0-9] warnings.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml warnings.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/encoding/warnings/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
warnings.def core.[0-9][0-9][0-9] \
mon.out libwarnings.def \
perlmain.c perl.exe \
so_locations warnings.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/encoding/warnings.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/encoding/warnings ../../lib/auto/encoding/warnings \
encoding-warnings-0.11 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/encoding/warnings.pm
Not in MANIFEST: t/1-warning.t
Not in MANIFEST: t/2-fatal.t
Not in MANIFEST: t/3-normal.t
Not in MANIFEST: t/4-lexical.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
Making if (distclean)
Making distclean in dist/if
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/if'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/if/extralibs.all \
core.[0-9][0-9] if.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml if.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/if/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
if.def core.[0-9][0-9][0-9] \
mon.out libif.def \
perlmain.c perl.exe \
so_locations if.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/if.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/if ../../lib/auto/if \
if-0.0601 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: if.pm
Not in MANIFEST: t/if.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/if'
Making lib (distclean)
Making distclean in dist/lib
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/lib'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/lib/extralibs.all \
core.[0-9][0-9] lib.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml lib.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/lib/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
lib.def core.[0-9][0-9][0-9] \
mon.out liblib.def \
perlmain.c perl.exe \
so_locations lib.exp
rm -rf \
lib.pm blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/lib.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/lib ../../lib/auto/lib \
lib-0.62
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib_pm.PL
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/01lib.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/lib'
Making libnet (distclean)
Making distclean in cpan/libnet
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Net/extralibs.all \
core.[0-9][0-9] Net.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Net.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Net/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Net.def core.[0-9][0-9][0-9] \
mon.out libNet.def \
perlmain.c perl.exe \
so_locations Net.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Net/FTP/L.pm ../../lib/Net/FTP/E.pm \
../../lib/Net/FTP.pm ../../lib/Net/FTP/dataconn.pm \
Makefile.old ../../lib/Net/FTP/I.pm \
../../lib/Net/Time.pm Makefile \
../../lib/Net/FTP/A.pm ../../lib/Net/POP3.pm \
../../lib/Net/Netrc.pm ../../lib/Net/NNTP.pm \
../../lib/Net/Domain.pm ../../lib/Net/Config.pm \
../../lib/Net/libnetFAQ.pod ../../lib/Net/Cmd.pm \
../../lib/Net/SMTP.pm
rm -rf \
../../lib/auto/Net ../../lib/auto/Net \
libnet-1.22
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Config.eg
Not in MANIFEST: demos/ftp
Not in MANIFEST: demos/inetd
Not in MANIFEST: demos/nntp
Not in MANIFEST: demos/nntp.mirror
Not in MANIFEST: demos/pop3
Not in MANIFEST: demos/smtp.self
Not in MANIFEST: demos/time
Not in MANIFEST: Hostname.pm.eg
Not in MANIFEST: Makefile.PL
Not in MANIFEST: Net/Cmd.pm
Not in MANIFEST: Net/Config.pm
Not in MANIFEST: Net/Domain.pm
Not in MANIFEST: Net/FTP.pm
Not in MANIFEST: Net/FTP/A.pm
Not in MANIFEST: Net/FTP/dataconn.pm
Not in MANIFEST: Net/FTP/E.pm
Not in MANIFEST: Net/FTP/I.pm
Not in MANIFEST: Net/FTP/L.pm
Not in MANIFEST: Net/libnetFAQ.pod
Not in MANIFEST: Net/Netrc.pm
Not in MANIFEST: Net/NNTP.pm
Not in MANIFEST: Net/POP3.pm
Not in MANIFEST: Net/SMTP.pm
Not in MANIFEST: Net/Time.pm
Not in MANIFEST: README
Not in MANIFEST: t/config.t
Not in MANIFEST: t/datasend.t
Not in MANIFEST: t/ftp.t
Not in MANIFEST: t/hostname.t
Not in MANIFEST: t/libnet_t.pl
Not in MANIFEST: t/netrc.t
Not in MANIFEST: t/nntp.t
Not in MANIFEST: t/require.t
Not in MANIFEST: t/smtp.t
Not in MANIFEST: t/time.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
Making parent (distclean)
Making distclean in cpan/parent
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/parent'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/parent/extralibs.all \
core.[0-9][0-9] parent.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml parent.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/parent/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
parent.def core.[0-9][0-9][0-9] \
mon.out libparent.def \
perlmain.c perl.exe \
so_locations parent.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/parent.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/parent ../../lib/auto/parent \
parent-0.225 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/parent.pm
Not in MANIFEST: t/compile-time-file.t
Not in MANIFEST: t/compile-time.t
Not in MANIFEST: t/lib/Dummy.pm
Not in MANIFEST: t/lib/Dummy/Outside.pm
Not in MANIFEST: t/lib/Dummy2.plugin
Not in MANIFEST: t/lib/FileThatOnlyExistsAsPMC.pmc
Not in MANIFEST: t/lib/ReturnsFalse.pm
Not in MANIFEST: t/parent-classfromclassfile.t
Not in MANIFEST: t/parent-classfromfile.t
Not in MANIFEST: t/parent-pmc.t
Not in MANIFEST: t/parent-returns-false.t
Not in MANIFEST: t/parent.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/parent'
Making podlators (distclean)
Making distclean in cpan/podlators
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
rm -f \
blib/script/pod2text blib/script/pod2man
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/extralibs.all \
core.[0-9][0-9] Pod.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Pod.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Pod.def core.[0-9][0-9][0-9] \
mon.out libPod.def \
perlmain.c perl.exe \
so_locations Pod.exp
rm -rf \
pod2text blib \
pod2man
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/Text/Termcap.pm ../../lib/Pod/ParseLink.pm \
Makefile.old ../../lib/Pod/Text.pm \
../../lib/Pod/Text/Overstrike.pm Makefile \
../../lib/Pod/Man.pm ../../lib/Pod/Text/Color.pm
rm -rf \
../../lib/auto/Pod pod2text.PL \
../../lib/auto/Pod podlators-2.4.0 \
pod2man.PL Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Pod/Man.pm
Not in MANIFEST: lib/Pod/ParseLink.pm
Not in MANIFEST: lib/Pod/Text.pm
Not in MANIFEST: lib/Pod/Text/Color.pm
Not in MANIFEST: lib/Pod/Text/Overstrike.pm
Not in MANIFEST: lib/Pod/Text/Termcap.pm
Not in MANIFEST: scripts/pod2man.PL
Not in MANIFEST: scripts/pod2text.PL
Not in MANIFEST: t/basic.cap
Not in MANIFEST: t/basic.clr
Not in MANIFEST: t/basic.man
Not in MANIFEST: t/basic.ovr
Not in MANIFEST: t/basic.pod
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/basic.txt
Not in MANIFEST: t/color.t
Not in MANIFEST: t/devise-date.t
Not in MANIFEST: t/filehandle.t
Not in MANIFEST: t/man-heading.t
Not in MANIFEST: t/man-options.t
Not in MANIFEST: t/man-perlio.t
Not in MANIFEST: t/man-utf8.t
Not in MANIFEST: t/man.t
Not in MANIFEST: t/overstrike.t
Not in MANIFEST: t/parselink.t
Not in MANIFEST: t/pod-parser.t
Not in MANIFEST: t/pod-spelling.t
Not in MANIFEST: t/pod.t
Not in MANIFEST: t/termcap.t
Not in MANIFEST: t/text-encoding.t
Not in MANIFEST: t/text-options.t
Not in MANIFEST: t/text-perlio.t
Not in MANIFEST: t/text-utf8.t
Not in MANIFEST: t/text.t
Not in MANIFEST: VERSION
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
rm -f realclean.sh veryclean.sh
for file in `find cpan dist ext -name ppport.h` ; do rm -f $file; done
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2'
make[2]: Entering directory `/tmp/buildd/perl-5.14.2'
rm -f core.*perl.*.? t/core.perl.*.? .?*.c
rm -f core *perl.core t/core t/*perl.core core.* t/core.*
rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl t/rantests
rm -f so_locations
rm -rf UU Makefile cflags config.h makedepend makedir myconfig pod/Makefile pstruct
rm -f makefile makefile.old makefile.old
rm -f preplibrary lib/Config.pm lib/Config_heavy.pl lib/Config_git.pl lib/Config.pod lib/ExtUtils/Miniperl.pm git_version.h lib/buildcustomize.pl
rm -rf lib/unicore/Decomposition.pl lib/unicore/TestProp.pl lib/unicore/CombiningClass.pl lib/unicore/Name.pl lib/unicore/Heavy.pl lib/unicore/mktables.lst lib/unicore/To lib/unicore/lib
rm -rf lib/auto
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
rm -f preload
rm -rf lib/Encode lib/Compress lib/Hash lib/re
rm -rf lib/TAP lib/Module/Pluggable lib/App
rm -rf lib/mro
rm -rf lib/IO/Compress lib/IO/Uncompress
rm -f lib/ExtUtils/ParseXS/t/XSTest.c
rm -f lib/ExtUtils/ParseXS/t/XSTest.o
rm -f lib/ExtUtils/ParseXS/t/XSTest.so
rm -fr lib/B
rm -fr lib/CPAN lib/CPANPLUS
rm -fr lib/ExtUtils/CBuilder
rmdir cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-localmirror
rmdir: failed to remove `cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus': No such file or directory
rmdir: failed to remove `cpan/CPANPLUS/t/dummy-cpanplus': No such file or directory
rmdir: failed to remove `cpan/CPANPLUS/t/dummy-localmirror': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir ext/B/lib
rmdir: failed to remove `ext/B/lib': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Archive/Tar lib/Archive lib/Attribute
rmdir lib/CGI
rmdir lib/Data lib/Devel lib/Digest
rmdir: failed to remove `lib/Data': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/ExtUtils/Command lib/ExtUtils/Constant lib/ExtUtils/Liblist lib/ExtUtils/MakeMaker
rmdir lib/File/Spec lib/Filter/Util lib/Filter
rmdir: failed to remove `lib/File/Spec': No such file or directory
rmdir: failed to remove `lib/Filter/Util': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/I18N/LangTags lib/IO/Socket lib/IO lib/IPC
rmdir: failed to remove `lib/IO/Socket': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/List/Util lib/List
rmdir: failed to remove `lib/List/Util': No such file or directory
rmdir: failed to remove `lib/List': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Locale/Maketext lib/Locale
rmdir: failed to remove `lib/Locale': Directory not empty
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Log/Message lib/Log
rmdir lib/Math/Big* lib/Math
rmdir lib/Memoize lib/MIME
rmdir: failed to remove `lib/MIME': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Module/Build/Platform lib/Module/Build lib/Module/Load lib/Module
rmdir lib/Net/FTP lib/Object
rmdir lib/Parse/CPAN lib/Parse
rmdir lib/PerlIO/via lib/PerlIO
rmdir lib/Package lib/Params
rmdir lib/Pod/Perldoc lib/Pod/Simple lib/Pod/Text
rmdir lib/Sys lib/Scalar/Util lib/Scalar
rmdir: failed to remove `lib/Sys': No such file or directory
rmdir: failed to remove `lib/Scalar/Util': No such file or directory
rmdir: failed to remove `lib/Scalar': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Term/UI lib/Thread lib/Tie/Hash
rmdir: failed to remove `lib/Tie/Hash': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test
rmdir lib/Unicode/Collate
rmdir: failed to remove `lib/Unicode/Collate': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/XS/APItest lib/XS
rmdir: failed to remove `lib/XS/APItest': No such file or directory
rmdir: failed to remove `lib/XS': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/inc/latest lib/inc
rmdir lib/autodie/exception lib/autodie lib/encoding lib/threads
rmdir: failed to remove `lib/threads': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rm -f lib/ExtUtils/CBuilder/t/libcompilet.dll.a
rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2'
rm -f *.o *.a all perlmain.c opmini.c perlmini.c uudmap.h generate_uudmap bitcount.h
rmdir .depending
rmdir: failed to remove `.depending': No such file or directory
make[1]: [_mopup] Error 1 (ignored)
make[1]: [_mopup] Error 1 (ignored)
make[1]: [_mopup] Error 1 (ignored)
rm -f perl.exp ext.libs pod/perltoc.pod extra.pods pod/perl5142delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod uni.data opmini.o perlmini.o
rm -f perl.export perl.dll perl.libexp perl.map perl.def
rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
rm -f perl miniperl libperl.a libperl.* microperl
rm -f config.arch config.over runtests
rm -f t/test_state
rm -f config.sh cppstdin Policy.sh extras.lst
make[1]: Leaving directory `/tmp/buildd/perl-5.14.2'
[ -f patchlevel-debian.h ] || touch patchlevel-debian.h
/bin/bash debian/config.debian --debug
First let's make sure your kit is complete. Checking...
Locating common programs...
Configure: line 2454: less: command not found
Checking compatibility between /bin/echo and builtin echo (if any)...
Symbolic links are supported.
Checking how to test for symbolic links...
You can test for symbolic links with 'test -h'.
Good, your tr supports [:lower:] and [:upper:] to convert case.
Using [:upper:] and [:lower:] to convert case.
3b1 dragonfly irix_6_0 opus super-ux
aix dynix irix_6_1 os2 svr4
aix_3 dynixptx isc os390 svr5
aix_4 epix isc_2 os400 ti1500
altos486 esix4 linux posix-bc titanos
amigaos fps lynxos powerux ultrix_4
atheos freebsd midnightbsd qnx umips
aux_3 genix mips rhapsody unicos
beos gnu mirbsd riscos unicosmk
bsdos gnukfreebsd mpc sco unisysdynix
catamount gnuknetbsd mpeix sco_2_3_0 utekv
convexos greenhills ncr_tower sco_2_3_1 uts
cxux haiku netbsd sco_2_3_2 uwin
cygwin hpux newsos4 sco_2_3_3 vmesa
darwin i386 next_3 sco_2_3_4 vos
dcosx interix next_3_0 solaris_2
dec_osf irix_4 next_4 stellar
dgux irix_5 nonstopux sunos_4_0
dos_djgpp irix_6 openbsd sunos_4_1
Which of these apply, if any? [linux]
You appear to have ELF support. I'll try to use it for dynamic loading.
If dynamic loading doesn't work, read hints/linux.sh for further information.
Operating system name? [linux]
Operating system version? [3.2.0-1+m68k.1-atari]
Installation prefix to use? (~name ok) [/usr]
AFS does not seem to be running...
What installation prefix should I use for installing files? (~name ok)
[/usr]
Build Perl for SOCKS? [n]
Use the PerlIO abstraction layer? [y]
Getting the current patchlevel...
Build a threading Perl? [y]
Use which C compiler? [cc]
Checking for GNU cc in disguise and/or its version number...
Now, how can we feed standard input to your C preprocessor...
Directories to use for library searches?
[/usr/local/lib /lib/m68k-linux-gnu /lib /usr/lib/m68k-linux-gnu /usr/lib]
What is the file extension used for shared libraries? [so]
Try to use long doubles if available? [n]
Checking for optional libraries...
What libraries to use?
[-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt]
What optimizer/debugger flag should be used? [-O2]
Any additional cc flags?
[-D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include]
Let me guess what the preprocessor flags are...
Any additional ld flags (NOT including libraries)?
[ -fstack-protector -L/usr/local/lib]
Checking your choice of C compiler and flags for coherency...
Computing filename position in cpp output for #include directives...
<stdlib.h> found.
Checking to see how big your integers are...
Checking to see if you have long long...
Checking to see how big your long longs are...
<inttypes.h> found.
Checking to see if you have int64_t...
Checking which 64-bit integer type we could use...
We could use 'long long' for 64-bit integers.
Try to use 64-bit integers, if available? [y]
Try to use maximal 64-bit support, if available? [n]
Checking to see how big your double precision numbers are...
Checking to see if you have long double...
Checking to see how big your long doubles are...
What is your architecture name [m68k-linux-gnu]
Threads selected.
....setting architecture name to m68k-linux-gnu-thread.
Multiplicity selected.
....setting architecture name to m68k-linux-gnu-thread-multi.
64 bit integers selected.
....setting architecture name to m68k-linux-gnu-thread-multi-64int.
Perlio selected.
Pathname where the public executables will reside? (~name ok) [/usr/bin]
Use relocatable @INC? [n]
Pathname where the private library files will reside? (~name ok)
[/usr/share/perl/5.14]
Where do you want to put the public architecture-dependent libraries? (~name ok)
[/usr/lib/perl/5.14]
Other username to test security of setuid scripts with? [none]
Well, the recommended value is *not* secure.
Does your kernel have *secure* setuid scripts? [n]
Installation prefix to use for add-on modules and utilities? (~name ok)
[/usr/local]
Pathname for the site-specific library files? (~name ok)
[/usr/local/share/perl/5.14.2]
List of earlier versions to include in @INC? [none]
<malloc/malloc.h> NOT found.
<malloc.h> found.
Checking to see how well your C compiler groks the void type...
Good. It appears to support void to the level perl5 wants.
Checking to see how big your pointers are...
Do you wish to wrap malloc calls to protect against potential overflows? [y]
Do you wish to attempt to use the malloc that comes with perl5? [n]
Your system wants malloc to return 'void *', it would seem.
Your system uses void free(), it would seem.
Pathname for the site-specific architecture-dependent library files? (~name ok)
[/usr/local/lib/perl/5.14.2]
Do you want to configure vendor-specific add-on directories? [y]
Installation prefix to use for vendor-supplied add-ons? (~name ok) [/usr]
Pathname for the vendor-supplied library files? (~name ok)
[/usr/share/perl5]
Pathname for vendor-supplied architecture-dependent files? (~name ok)
[/usr/lib/perl5]
Colon-separated list of additional directories for perl to search? [none]
Checking out function prototypes...
Support DTrace if available? [n]
Install any extra modules (y or n)? [n]
Directory for the main Perl5 html pages? (~name ok) [none]
Directory for the Perl5 module html pages? (~name ok) [none]
Checking for GNU C Library...
Shall I use /usr/bin/nm to extract C symbols from the libraries? [n]
<dld.h> NOT found.
Checking for C++...
dlopen() found.
<unistd.h> found.
Do you wish to use dynamic loading? [y]
Source file to use for dynamic loading [ext/DynaLoader/dl_dlopen.xs]
Any special flags to pass to cc -c to compile shared library modules?
[-fPIC]
What command should be used to create dynamic libraries? [cc]
Any special flags to pass to cc to create a dynamically loaded library?
[-shared -O2 -g -L/usr/local/lib -fstack-protector]
Any special flags to pass to cc to use dynamic linking? [-Wl,-E]
Build a shared libperl.so (y/n) [n]
System manual is in /usr/share/man/man1.
Where do the main Perl5 manual pages (source) go? (~name ok)
[/usr/share/man/man1]
What suffix should be used for the main Perl5 man pages? [1]
You can have filenames longer than 14 characters.
Where do the perl5 library man pages (source) go? (~name ok)
[/usr/share/man/man3]
What suffix should be used for the perl5 library man pages? [3perl]
Figuring out host name...
Your host name appears to be "ara5.mirbsd.org". Right? [y]
What is your domain name? [.mirbsd.org]
What is your e-mail address? [pbuilder at ara5.mirbsd.org]
Perl administrator e-mail address [pbuilder at ara5.mirbsd.org]
Do you want to install only the version-specific parts of perl? [n]
What shall I put after the #! to start up perl ("none" to not use #!)?
[/usr/bin/perl]
Where do you keep publicly executable scripts? (~name ok) [/usr/bin]
Pathname where the add-on public executables should be installed? (~name ok)
[/usr/local/bin]
Pathname where the site-specific html pages should be installed? (~name ok)
[none]
Pathname where the site-specific library html pages should be installed? (~name ok)
[none]
Pathname where the site-specific manual pages should be installed? (~name ok)
[/usr/local/man/man1]
Pathname where the site-specific library manual pages should be installed? (~name ok)
[/usr/local/man/man3]
Pathname where add-on public executable scripts should be installed? (~name ok)
[/usr/local/bin]
Use the "fast stdio" if available? [n]
off_t found.
Checking to see how big your file offsets are...
fpos_t found.
Checking the size of fpos_t...
Try to understand large files, if available? [y]
Rechecking to see how big your file offsets are...
Rechecking the size of fpos_t... 16 bytes.
Pathname for the vendor-supplied executables directory? (~name ok)
[/usr/bin]
Pathname for the vendor-supplied html pages? (~name ok) [none]
Pathname for the vendor-supplied html pages? (~name ok) [none]
Pathname for the vendor-supplied manual section 1 pages? (~name ok)
[/usr/share/man/man1]
Pathname for the vendor-supplied manual section 3 pages? (~name ok)
[/usr/share/man/man3]
Pathname for the vendor-supplied scripts directory? (~name ok) [/usr/bin]
Using <string.h> instead of <strings.h>.
qgcvt() found.
Checking how to print long doubles...
gconvert NOT found.
gcvt() found.
I'll use gcvt to convert floats into a string.
fwalk() NOT found.
access() found.
<sys/file.h> defines the *_OK access constants.
accessx() NOT found.
aintl() NOT found.
alarm() found.
ctime64() NOT found.
localtime64() NOT found.
gmtime64() NOT found.
mktime64() NOT found.
difftime64() NOT found.
asctime64() NOT found.
<pthread.h> found.
<sys/types.h> found.
<sys/select.h> found.
Testing to see if we should include <time.h>, <sys/time.h> or both.
We'll include <time.h>.
We'll include <sys/time.h>.
Checking to see if your struct tm has tm_zone field...
Checking to see if your struct tm has tm_gmtoff field...
asctime_r() found.
atolf() NOT found.
atoll() found.
Checking whether your compiler can handle __attribute__((format)) ...
Checking whether your compiler allows __printf__ format to be null ...
Checking whether your compiler can handle __attribute__((malloc)) ...
Checking whether your compiler can handle __attribute__((nonnull(1))) ...
Checking whether your compiler can handle __attribute__((noreturn)) ...
Checking whether your compiler can handle __attribute__((pure)) ...
Checking whether your compiler can handle __attribute__((unused)) ...
Checking whether your compiler can handle __attribute__((deprecated)) ...
Checking whether your compiler can handle __attribute__((warn_unused_result)) ...
bcmp() found.
bcopy() found.
getpgrp() found.
You have to use getpgrp() instead of getpgrp(pid).
setpgrp() found.
You have to use setpgrp() instead of setpgrp(pid,pgrp).
Checking whether your compiler can handle __builtin_choose_expr ...
Checking whether your compiler can handle __builtin_expect ...
bzero() found.
<stdarg.h> found.
<varargs.h> found.
We'll include <stdarg.h> to get va_dcl definition.
You have <stdarg.h> and <stdlib.h>, so checking for C99 variadic macros.
You have C99 variadic macros.
You have void (*signal())().
Checking whether your C compiler can cast large floats to int32.
Checking whether your C compiler can cast negative float to unsigned.
vprintf() found.
Your vsprintf() returns (int).
chown() found.
chroot() found.
chsize() NOT found.
class() NOT found.
clearenv() found.
Hmm... Looks like you have Berkeley networking support.
socketpair() found.
Checking the availability sa_len in the sock struct ...
Checking the availability sin6_scope_id in struct sockaddr_in6 ...
Checking the availability of certain socket constants...
<sys/uio.h> found.
Checking to see if your system supports struct cmsghdr...
Checking to see if your C compiler knows about "const"...
copysignl() found.
crypt() found.
<crypt.h> found.
crypt_r() found.
ctermid() found.
ctermid_r() NOT found.
ctime_r() found.
cuserid() found.
<limits.h> found.
<float.h> found.
DBL_DIG found.
dbmclose() found.
<dbm.h> found.
difftime() found.
<dirent.h> found.
Your directory entries are struct dirent.
Your directory entry does not know about the d_namlen field.
Checking to see if DIR has a dd_fd member variable
<sys/dir.h> found.
<sys/ndir.h> NOT found.
dirfd() found.
dlerror() found.
<dlfcn.h> found.
What is the extension of dynamically loaded modules [so]
Checking whether your dlsym() needs a leading underscore ...
dlsym doesn't need a leading underscore.
drand48_r() found.
dup2() found.
eaccess() found.
endgrent() found.
<grp.h> found.
endgrent_r() NOT found.
endhostent() found.
<netdb.h> found.
endhostent_r() NOT found.
endnetent() found.
endnetent_r() NOT found.
endprotoent() found.
endprotoent_r() NOT found.
endpwent() found.
<pwd.h> found.
endpwent_r() NOT found.
endservent() found.
endservent_r() NOT found.
<sys/file.h> defines the O_* constants...
and you have the 3 argument form of open().
<sys/file.h> found.
We'll be including <sys/file.h>.
<fcntl.h> found.
We don't need to include <fcntl.h> if we include <sys/file.h>.
fork() found.
pipe() found.
Figuring out the flag used by open() for non-blocking I/O...
Let's see what value errno gets from read() on a O_NONBLOCK file...
Checking how std your stdio is...
Checking to see what happens if we set the stdio ptr...
Increasing ptr in your stdio decreases cnt by the same amount. Good.
You seem to have 'fast stdio' to directly manipulate the stdio buffers.
fchdir() found.
fchmod() found.
fchown() found.
fcntl() found.
Well, your system knows about the normal fd_set typedef...
and you have the normal fd_set macros (just as I'd expect).
fgetpos() found.
finite() found.
finitel() found.
flock() found.
fp_class() NOT found.
pathconf() found.
fpathconf() found.
fpclass() NOT found.
fpclassify() NOT found.
fpclassl() NOT found.
Checking to see if you have fpos64_t...
frexpl() found.
<sys/param.h> found.
<sys/mount.h> found.
Checking to see if your system supports struct fs_data...
fseeko() found.
fsetpos() found.
fstatfs() found.
statvfs() found.
fstatvfs() found.
fsync() found.
ftello() found.
Checking if you have a working futimes()
Yes, you have
<ndbm.h> NOT found.
<gdbm/ndbm.h> NOT found.
<gdbm-ndbm.h> found.
dbm_open() found.
Checking if your <gdbm-ndbm.h> uses prototypes...
getaddrinfo() found.
getcwd() found.
getespwnam() NOT found.
getfsstat() NOT found.
getgrent() found.
getgrent_r() found.
getgrgid_r() found.
getgrnam_r() found.
gethostbyaddr() found.
gethostbyname() found.
gethostent() found.
gethostname() found.
uname() found.
Shall I ignore gethostname() from now on? [n]
gethostbyaddr_r() found.
gethostbyname_r() found.
gethostent_r() found.
getitimer() found.
getlogin() found.
getlogin_r() found.
getmnt() NOT found.
getmntent() found.
getnameinfo() found.
getnetbyaddr() found.
getnetbyname() found.
getnetent() found.
getnetbyaddr_r() found.
getnetbyname_r() found.
getnetent_r() found.
getpagesize() found.
getprotobyname() found.
getprotobynumber() found.
getprotoent() found.
getpgid() found.
getpgrp2() NOT found.
getppid() found.
getpriority() found.
getprotobyname_r() found.
getprotobynumber_r() found.
getprotoent_r() found.
getprpwnam() NOT found.
getpwent() found.
getpwent_r() found.
getpwnam_r() found.
getpwuid_r() found.
getservbyname() found.
getservbyport() found.
getservent() found.
getservbyname_r() found.
getservbyport_r() found.
getservent_r() found.
getspnam() found.
<shadow.h> found.
getspnam_r() found.
gettimeofday() found.
gmtime_r() found.
hasmntopt() found.
<netinet/in.h> found.
<arpa/inet.h> found.
htonl() found.
ilogbl() found.
strchr() found.
inet_aton() found.
inet_ntop() found.
inet_pton() found.
isascii() found.
isfinite() NOT found.
isinf() found.
isnan() found.
isnanl() found.
killpg() found.
lchown() found.
LDBL_DIG found.
<math.h> found.
Checking to see if your libm supports _LIB_VERSION...
Yes, it does (2)
link() found.
localtime_r() found.
localeconv() found.
lockf() found.
lstat() found.
madvise() found.
malloc_size() NOT found.
malloc_good_size() NOT found.
mblen() found.
mbstowcs() found.
mbtowc() found.
memchr() found.
memcmp() found.
memcpy() found.
memmove() found.
memset() found.
mkdir() found.
mkdtemp() found.
mkfifo() found.
mkstemp() found.
mkstemps() found.
mktime() found.
<sys/mman.h> found.
mmap() found.
and it returns (void *).
sqrtl() found.
scalbnl() found.
modfl() found.
Your modfl() seems okay for large values.
mprotect() found.
msgctl() found.
msgget() found.
msgsnd() found.
msgrcv() found.
You have the full msg*(2) library.
Checking to see if your system supports struct msghdr...
msync() found.
munmap() found.
nice() found.
<langinfo.h> found.
nl_langinfo() found.
Checking to see if your C compiler knows about "volatile"...
Choosing the C types to be used for Perl's internal types...
Checking how many bits of your UVs your NVs can preserve...
Checking to find the largest integer value your NVs can hold...
The largest integer your NVs can preserve is equal to 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0
Checking whether NV 0.0 is all bits zero in memory...
0.0 is represented as all bits zero in memory
Checking to see if you have off64_t...
Checking what constant to use for creating joinable pthreads...
You seem to use PTHREAD_CREATE_JOINABLE.
pause() found.
poll() found.
prctl() found.
readlink() found.
vfork() found.
Do you still want to use vfork()? [n]
pthread_atfork found.
pthread_attr_setscope() found.
sched_yield() found.
pthread_yield() found.
random_r() found.
readdir() found.
seekdir() found.
telldir() found.
rewinddir() found.
readdir64_r() found.
readdir_r() found.
readv() found.
recvmsg() found.
rename() found.
rmdir() found.
<memory.h> found.
Checking if your memcmp() can compare relative magnitude...
select() found.
semctl() found.
semget() found.
semop() found.
You have the full sem*(2) library.
You do not have union semun in <sys/sem.h>.
You can use union semun for semctl IPC_STAT.
You can also use struct semid_ds* for semctl IPC_STAT.
sendmsg() found.
setegid() found.
seteuid() found.
setgrent() found.
setgrent_r() NOT found.
sethostent() found.
sethostent_r() NOT found.
setitimer() found.
setlinebuf() found.
setlocale() found.
<locale.h> found.
setlocale_r() NOT found.
setnetent() found.
setnetent_r() NOT found.
setprotoent() found.
setpgid() found.
setpgrp2() NOT found.
setpriority() found.
setproctitle() NOT found.
setprotoent_r() NOT found.
setpwent() found.
setpwent_r() NOT found.
setregid() found.
setresgid() found.
setreuid() found.
setresuid() found.
setrgid() NOT found.
setruid() NOT found.
setservent() found.
setservent_r() NOT found.
setsid() found.
setvbuf() found.
<sfio.h> NOT found.
shmctl() found.
shmget() found.
shmat() found.
and it returns (void *).
shmdt() found.
You have the full shm*(2) library.
sigaction() found.
<sunmath.h> NOT found.
Checking to see if you have signbit() available to work on double... Yes.
sigprocmask() found.
POSIX sigsetjmp found.
snprintf() found.
vsnprintf() found.
sockatmark() found.
socks5_init() NOT found.
Checking whether sprintf returns the length of the string...
sprintf returns the length of the string (as ANSI says it should)
srand48_r() found.
srandom_r() found.
<sys/stat.h> found.
Checking to see if your struct stat has st_blocks field...
<sys/vfs.h> found.
<sys/statfs.h> found.
Checking to see if your system supports struct statfs...
Checking to see if your struct statfs has f_flags field...
Your compiler supports static __inline__.
Checking how to access stdio streams by file descriptor number...
I can't figure out how to access stdio streams by file descriptor number.
strcoll() found.
Checking to see if your C compiler can copy structs...
strerror() found.
strerror_r() found.
strftime() found.
strlcat() NOT found.
strlcpy() NOT found.
strtod() found.
strtol() found.
strtold() found.
strtoll() found.
strtoq() found.
strtoul() found.
strtoull() found.
strtouq() found.
strxfrm() found.
symlink() found.
syscall() found.
sysconf() found.
system() found.
tcgetpgrp() found.
tcsetpgrp() found.
time() found.
time_t found.
timegm() found.
<sys/times.h> found.
times() found.
clock_t found.
tmpnam_r() found.
truncate() found.
ttyname_r() found.
tzname[] found.
(Testing for character data alignment may crash the test. That's okay.)
It seems that you must access character data in an aligned manner.
ualarm() found.
Hmm. Based on the hints in hints/linux.sh,
the recommended value for $d_ualarm on this machine was "undef"!
Keep the recommended value? [y]
umask() found.
unordered() NOT found.
unsetenv() found.
usleep() found.
ustat() found.
closedir() found.
Checking whether closedir() returns a status...
wait4() found.
waitpid() found.
wcstombs() found.
wctomb() found.
writev() found.
Checking alignment constraints...
Doubles must be aligned on a how-many-byte boundary? [2]
Checking how long a character is (in bits)...
What is the length of a character (in bits)? [8]
Checking to see how your cpp does stuff like concatenate tokens...
Oh! Smells like ANSI's been here.
<db.h> found.
Checking Berkeley DB version ...
Looks OK.
Checking return type needed for hash for Berkeley DB ...
Checking return type needed for prefix for Berkeley DB ...
Looking for a random number function...
Good, found drand48().
Use which function to generate random numbers? [drand48]
Determining whether or not we are on an EBCDIC system...
Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8.
Checking how to flush all pending stdio output...
Your fflush(NULL) works okay for output streams.
Let's see if it clobbers input pipes...
fflush(NULL) seems to behave okay with input streams.
Checking the size of gid_t...
Checking the sign of gid_t...
Checking how to print 64-bit integers...
Checking the format strings to be used for Perl's internal types...
Checking the format string to be used for gids...
getgroups() found.
setgroups() found.
What type pointer is the second argument to getgroups() and setgroups()?
[gid_t]
Build Perl with MAD? [n]
Checking if your /usr/bin/make program sets $(MAKE)...
mode_t found.
It seems that you don't need va_copy().
size_t found.
What pager is used on your system? [/usr/bin/sensible-pager]
pid_t found.
Checking how to generate random libraries on your machine...
<values.h> found.
Sizeof time_t = 4
Your select() operates on 32 bits at a time.
Generating a list of signal names and numbers...
Checking the size of size_t...
Checking to see if you have socklen_t...
<socks.h> NOT found.
I'll be using ssize_t for functions returning a byte count.
Your stdio uses signed chars.
Checking the size of uid_t...
Checking the sign of uid_t...
Checking the format string to be used for uids...
It appears we'll be able to prototype varargs functions.
Which compiler compiler (yacc) shall I use? [yacc]
<assert.h> found.
<fp.h> NOT found.
<fp_class.h> NOT found.
<gdbm.h> found.
gdbm_open() found.
<ieeefp.h> NOT found.
<libutil.h> NOT found.
<mach/cthreads.h> NOT found.
<mntent.h> found.
<net/errno.h> NOT found.
<netinet/tcp.h> found.
<poll.h> found.
<prot.h> NOT found.
Guessing which symbols your C compiler and preprocessor define...
try.c: In function 'main':
try.c:5701:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5704:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5707:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5710:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5737:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5740:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5743:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5746:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5773:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5776:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5779:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5782:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5809:16: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5812:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5815:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5818:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5845:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5848:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5851:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5854:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6637:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6640:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6643:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6646:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6673:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6676:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6679:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6682:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6709:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6712:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6715:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6718:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6745:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6748:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6751:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6754:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6781:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6784:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6787:21: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6790:21: warning: extra tokens at end of #ifdef directive [enabled by default]
tcsetattr() found.
You have POSIX termios.h... good!
<stddef.h> found.
<sys/access.h> NOT found.
<sys/filio.h> NOT found.
<sys/ioctl.h> found.
<syslog.h> found.
<sys/mode.h> NOT found.
<sys/poll.h> found.
<sys/resource.h> found.
<sys/security.h> NOT found.
<sys/statvfs.h> found.
<sys/un.h> found.
<sys/utsname.h> found.
<sys/wait.h> found.
<ustat.h> found.
<utime.h> found.
Looking for extensions...
What extensions do you wish to load dynamically?
[B Compress/Raw/Bzip2 Compress/Raw/Zlib Cwd DB_File Data/Dumper Devel/DProf Devel/PPPort Devel/Peek Digest/MD5 Digest/SHA Encode Fcntl File/Glob Filter/Util/Call GDBM_File Hash/Util Hash/Util/FieldHash I18N/Langinfo IO IPC/SysV List/Util MIME/Base64 Math/BigInt/FastCalc NDBM_File ODBM_File Opcode POSIX PerlIO/encoding PerlIO/scalar PerlIO/via SDBM_File Socket Storable Sys/Hostname Sys/Syslog Text/Soundex Tie/Hash/NamedCapture Time/HiRes Time/Piece Unicode/Collate Unicode/Normalize XS/APItest XS/Typemap attributes mro re threads threads/shared]
What extensions do you wish to load statically? [none]
I see a config.over file. Do you wish to load it? [y]
Stripping down executable paths...
Creating config.sh...
Doing variable substitutions on .SH files...
Extracting config.h (with variable substitutions)
Extracting cflags (with variable substitutions)
Not re-extracting config.h
Extracting makedepend (with variable substitutions)
Extracting Makefile (with variable substitutions)
Extracting myconfig (with variable substitutions)
Extracting pod/Makefile (with variable substitutions)
Extracting Policy.sh (with variable substitutions)
Extracting runtests (with variable substitutions)
Extracting utils/Makefile (with variable substitutions)
Extracting x2p/cflags (with variable substitutions)
Extracting x2p/Makefile (with variable substitutions)
Run make depend now? [y]
make[1]: Entering directory `/tmp/buildd/perl-5.14.2'
sh ./makedepend MAKE=make
make[2]: Entering directory `/tmp/buildd/perl-5.14.2'
rm -f opmini.c
/bin/ln -s op.c opmini.c
rm -f perlmini.c
/bin/ln -s perl.c perlmini.c
echo av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c miniperlmain.c opmini.c perlmini.c | tr ' ' '\n' >.clist
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2'
Finding dependencies for av.o.
Finding dependencies for scope.o.
Finding dependencies for op.o.
Finding dependencies for doop.o.
Finding dependencies for doio.o.
Finding dependencies for dump.o.
Finding dependencies for gv.o.
Finding dependencies for hv.o.
Finding dependencies for mg.o.
Finding dependencies for reentr.o.
Finding dependencies for mro.o.
Finding dependencies for perl.o.
Finding dependencies for perly.o.
Finding dependencies for pp.o.
Finding dependencies for pp_hot.o.
Finding dependencies for pp_ctl.o.
Finding dependencies for pp_sys.o.
Finding dependencies for regcomp.o.
Finding dependencies for regexec.o.
Finding dependencies for utf8.o.
Finding dependencies for sv.o.
Finding dependencies for taint.o.
Finding dependencies for toke.o.
Finding dependencies for util.o.
Finding dependencies for deb.o.
Finding dependencies for run.o.
Finding dependencies for universal.o.
Finding dependencies for pad.o.
Finding dependencies for globals.o.
Finding dependencies for keywords.o.
Finding dependencies for perlio.o.
Finding dependencies for perlapi.o.
Finding dependencies for numeric.o.
Finding dependencies for mathoms.o.
Finding dependencies for locale.o.
Finding dependencies for pp_pack.o.
Finding dependencies for pp_sort.o.
Finding dependencies for miniperlmain.o.
Finding dependencies for opmini.o.
Finding dependencies for perlmini.o.
make[2]: Entering directory `/tmp/buildd/perl-5.14.2'
echo Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH pod/Makefile.SH | tr ' ' '\n' >.shlist
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2'
Updating makefile...
cd x2p; make depend
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
sh ../makedepend MAKE=make
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
echo hash.c str.c util.c walk.c | tr ' ' '\n' >.clist
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
Finding dependencies for hash.o.
Finding dependencies for str.o.
Finding dependencies for util.o.
Finding dependencies for walk.o.
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
Updating makefile...
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
make[1]: Leaving directory `/tmp/buildd/perl-5.14.2'
Now you must run 'make'.
If you compile perl5 on a different machine or from a different object
directory, copy the Policy.sh file from this object directory to the
new one before you run Configure -- this will help you with most of
the policy defaults.
/usr/bin/make perl
make[1]: Entering directory `/tmp/buildd/perl-5.14.2'
`sh cflags "optimize='-O2 -g'" miniperlmain.o` miniperlmain.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" gv.o` gv.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" toke.o` toke.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perly.o` perly.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pad.o` pad.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" regcomp.o` regcomp.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
regcomp.c: In function 'S_dump_trie':
regcomp.c:1040:5: warning: variable 're_debug_flags' set but not used [-Wunused-but-set-variable]
regcomp.c: In function 'S_dump_trie_interim_list':
regcomp.c:1131:5: warning: variable 're_debug_flags' set but not used [-Wunused-but-set-variable]
regcomp.c: In function 'S_dump_trie_interim_table':
regcomp.c:1189:5: warning: variable 're_debug_flags' set but not used [-Wunused-but-set-variable]
regcomp.c: In function 'Perl_re_compile':
regcomp.c:5316:5: warning: variable 're_debug_flags' set but not used [-Wunused-but-set-variable]
regcomp.c: In function 'Perl_reg_named_buff_nextkey':
regcomp.c:5465:5: warning: variable 're_debug_flags' set but not used [-Wunused-but-set-variable]
regcomp.c: In function 'Perl_pregfree2':
regcomp.c:11318:5: warning: variable 're_debug_flags' set but not used [-Wunused-but-set-variable]
regcomp.c: In function 'Perl_regdupe_internal':
regcomp.c:11661:14: warning: variable 'npar' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" dump.o` dump.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" util.o` util.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" mg.o` mg.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" reentr.o` reentr.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" mro.o` mro.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" keywords.o` keywords.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" hv.o` hv.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
hv.c: In function 'S_hv_delete_common':
hv.c:907:16: warning: variable 'first_entry' set but not used [-Wunused-but-set-variable]
hv.c: In function 'S_clear_placeholders':
hv.c:1619:7: warning: variable 'first' set but not used [-Wunused-but-set-variable]
hv.c: In function 'S_unshare_hek_or_pvn':
hv.c:2649:10: warning: variable 'first' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" av.o` av.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" run.o` run.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_hot.o` pp_hot.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" sv.o` sv.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp.o` pp.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" scope.o` scope.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_ctl.o` pp_ctl.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
pp_ctl.c: In function 'Perl_pp_goto':
pp_ctl.c:2702:7: warning: variable 'gimme' set but not used [-Wunused-but-set-variable]
pp_ctl.c:2701:8: warning: variable 'newsp' set but not used [-Wunused-but-set-variable]
pp_ctl.c: In function 'Perl_pp_leavewhen':
pp_ctl.c:4849:9: warning: variable 'gimme' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" pp_sys.o` pp_sys.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
pp_sys.c: In function 'Perl_pp_warn':
pp_sys.c:422:17: warning: variable 'pv' set but not used [-Wunused-but-set-variable]
pp_sys.c: In function 'Perl_pp_die':
pp_sys.c:462:17: warning: variable 'pv' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" doop.o` doop.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" doio.o` doio.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" regexec.o` regexec.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
regexec.c: In function 'S_regmatch':
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" utf8.o` utf8.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" taint.o` taint.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" deb.o` deb.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" universal.o` universal.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" generate_uudmap.o` generate_uudmap.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
cc -o generate_uudmap -fstack-protector -L/usr/local/lib generate_uudmap.o -ldl -lm -lpthread -lc -lcrypt
../generate_uudmap uudmap.h bitcount.h
`sh cflags "optimize='-O2 -g'" globals.o` globals.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perlio.o` perlio.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perlapi.o` perlapi.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" numeric.o` numeric.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" mathoms.o` mathoms.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" locale.o` locale.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_pack.o` pp_pack.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_sort.o` pp_sort.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" opmini.o` -DPERL_IS_MINIPERL -DPERL_EXTERNAL_GLOB opmini.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perlmini.o` -DPERL_IS_MINIPERL -DPERL_EXTERNAL_GLOB perlmini.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
cc -fstack-protector -L/usr/local/lib -o miniperl \
gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o keywords.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o \
miniperlmain.o opmini.o perlmini.o -ldl -lm -lpthread -lc -lcrypt
../miniperl -w -Ilib -MExporter -e '<?>' || /usr/bin/make minitest
../miniperl -Ilib make_patchnum.pl
Updating 'git_version.h' and 'lib/Config_git.pl'
../miniperl -Ilib configpm
written lib/Config.pod
updated lib/Config.pm
updated lib/Config_heavy.pl
../miniperl -Ilib minimod.pl > lib/ExtUtils/Miniperl.pm
../miniperl -Ilib -Ilib -MExtUtils::Miniperl -e 'writemain(@ARGV)' DynaLoader > perlmain.c
`sh cflags "optimize='-O2 -g'" perlmain.o` perlmain.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" op.o` op.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perl.o` perl.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
../miniperl -Ilib write_buildcustomize.pl >lib/buildcustomize.pl
../miniperl -Ilib make_ext.pl cpan/Archive-Extract/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Archive::Extract (all)
Creating Makefile.PL in cpan/Archive-Extract for Archive::Extract
Running Makefile.PL in cpan/Archive-Extract
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Archive::Extract
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
Making all in cpan/Archive-Extract
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
cp lib/Archive/Extract.pm ../../lib/Archive/Extract.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
../miniperl -Ilib make_ext.pl cpan/Archive-Tar/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Archive::Tar (all)
Creating Makefile.PL in cpan/Archive-Tar for Archive::Tar
Running Makefile.PL in cpan/Archive-Tar
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Archive::Tar
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
Making all in cpan/Archive-Tar
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
cp lib/Archive/Tar/Constant.pm ../../lib/Archive/Tar/Constant.pm
cp lib/Archive/Tar.pm ../../lib/Archive/Tar.pm
cp lib/Archive/Tar/File.pm ../../lib/Archive/Tar/File.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
../miniperl -Ilib make_ext.pl dist/Attribute-Handlers/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Attribute::Handlers (all)
Creating Makefile.PL in dist/Attribute-Handlers for Attribute::Handlers
Running Makefile.PL in dist/Attribute-Handlers
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Attribute::Handlers
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
Making all in dist/Attribute-Handlers
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
cp lib/Attribute/Handlers.pm ../../lib/Attribute/Handlers.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
../miniperl -Ilib make_ext.pl cpan/AutoLoader/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making AutoLoader (all)
Creating Makefile.PL in cpan/AutoLoader for AutoLoader
Running Makefile.PL in cpan/AutoLoader
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for AutoLoader
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
Making all in cpan/AutoLoader
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
cp lib/AutoLoader.pm ../../lib/AutoLoader.pm
cp lib/AutoSplit.pm ../../lib/AutoSplit.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
../miniperl -Ilib make_ext.pl cpan/B-Debug/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making B::Debug (all)
Creating Makefile.PL in cpan/B-Debug for B::Debug
Running Makefile.PL in cpan/B-Debug
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for B::Debug
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
Making all in cpan/B-Debug
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
cp Debug.pm ../../lib/B/Debug.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
../miniperl -Ilib make_ext.pl dist/B-Deparse/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making B::Deparse (all)
Creating Makefile.PL in dist/B-Deparse for B::Deparse
Running Makefile.PL in dist/B-Deparse
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for B::Deparse
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
Making all in dist/B-Deparse
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
cp Deparse.pm ../../lib/B/Deparse.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
../miniperl -Ilib make_ext.pl dist/B-Lint/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making B::Lint (all)
Creating Makefile.PL in dist/B-Lint for B::Lint
Running Makefile.PL in dist/B-Lint
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for B::Lint
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
Making all in dist/B-Lint
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
cp lib/B/Lint/Debug.pm ../../lib/B/Lint/Debug.pm
cp lib/B/Lint.pm ../../lib/B/Lint.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
../miniperl -Ilib make_ext.pl cpan/CGI/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CGI (all)
Creating Makefile.PL in cpan/CGI for CGI
Running Makefile.PL in cpan/CGI
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CGI
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
Making all in cpan/CGI
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
cp lib/CGI/Switch.pm ../../lib/CGI/Switch.pm
cp lib/CGI/Cookie.pm ../../lib/CGI/Cookie.pm
cp lib/CGI/Pretty.pm ../../lib/CGI/Pretty.pm
cp lib/CGI.pm ../../lib/CGI.pm
cp lib/CGI/Carp.pm ../../lib/CGI/Carp.pm
cp lib/CGI/Apache.pm ../../lib/CGI/Apache.pm
cp lib/CGI/Util.pm ../../lib/CGI/Util.pm
cp lib/CGI/Push.pm ../../lib/CGI/Push.pm
cp lib/CGI/Fast.pm ../../lib/CGI/Fast.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
../miniperl -Ilib make_ext.pl cpan/CPAN/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CPAN (all)
Creating Makefile.PL in cpan/CPAN for CPAN
Running Makefile.PL in cpan/CPAN
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CPAN
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
Making all in cpan/CPAN
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
cp lib/CPAN.pm ../../lib/CPAN.pm
cp lib/CPAN/CacheMgr.pm ../../lib/CPAN/CacheMgr.pm
cp lib/CPAN/FTP/netrc.pm ../../lib/CPAN/FTP/netrc.pm
cp lib/CPAN/LWP/UserAgent.pm ../../lib/CPAN/LWP/UserAgent.pm
cp lib/CPAN/FTP.pm ../../lib/CPAN/FTP.pm
cp lib/CPAN/Queue.pm ../../lib/CPAN/Queue.pm
cp lib/CPAN/Distroprefs.pm ../../lib/CPAN/Distroprefs.pm
cp lib/CPAN/Kwalify/distroprefs.yml ../../lib/CPAN/Kwalify/distroprefs.yml
cp lib/App/Cpan.pm ../../lib/App/Cpan.pm
cp lib/CPAN/Kwalify.pm ../../lib/CPAN/Kwalify.pm
cp lib/CPAN/Module.pm ../../lib/CPAN/Module.pm
cp lib/CPAN/Author.pm ../../lib/CPAN/Author.pm
cp lib/CPAN/Debug.pm ../../lib/CPAN/Debug.pm
cp lib/CPAN/HTTP/Credentials.pm ../../lib/CPAN/HTTP/Credentials.pm
cp lib/CPAN/API/HOWTO.pod ../../lib/CPAN/API/HOWTO.pod
cp lib/CPAN/HTTP/Client.pm ../../lib/CPAN/HTTP/Client.pm
cp lib/CPAN/Complete.pm ../../lib/CPAN/Complete.pm
cp lib/CPAN/FirstTime.pm ../../lib/CPAN/FirstTime.pm
cp lib/CPAN/Distrostatus.pm ../../lib/CPAN/Distrostatus.pm
cp lib/CPAN/Exception/blocked_urllist.pm ../../lib/CPAN/Exception/blocked_urllist.pm
cp lib/CPAN/Tarzip.pm ../../lib/CPAN/Tarzip.pm
cp lib/CPAN/Prompt.pm ../../lib/CPAN/Prompt.pm
cp lib/CPAN/URL.pm ../../lib/CPAN/URL.pm
cp lib/CPAN/Version.pm ../../lib/CPAN/Version.pm
cp lib/CPAN/DeferredCode.pm ../../lib/CPAN/DeferredCode.pm
cp lib/CPAN/Distribution.pm ../../lib/CPAN/Distribution.pm
cp lib/CPAN/Nox.pm ../../lib/CPAN/Nox.pm
cp lib/CPAN/Bundle.pm ../../lib/CPAN/Bundle.pm
cp lib/CPAN/Exception/RecursiveDependency.pm ../../lib/CPAN/Exception/RecursiveDependency.pm
cp lib/CPAN/Shell.pm ../../lib/CPAN/Shell.pm
cp lib/CPAN/HandleConfig.pm ../../lib/CPAN/HandleConfig.pm
cp lib/CPAN/InfoObj.pm ../../lib/CPAN/InfoObj.pm
cp lib/CPAN/Exception/yaml_not_installed.pm ../../lib/CPAN/Exception/yaml_not_installed.pm
cp lib/CPAN/Index.pm ../../lib/CPAN/Index.pm
cp lib/CPAN/Kwalify/distroprefs.dd ../../lib/CPAN/Kwalify/distroprefs.dd
cp lib/CPAN/Mirrors.pm ../../lib/CPAN/Mirrors.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
../miniperl -Ilib make_ext.pl cpan/CPAN-Meta/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CPAN::Meta (all)
Creating Makefile.PL in cpan/CPAN-Meta for CPAN::Meta
Running Makefile.PL in cpan/CPAN-Meta
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CPAN::Meta
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
Making all in cpan/CPAN-Meta
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
cp lib/CPAN/Meta.pm ../../lib/CPAN/Meta.pm
cp lib/CPAN/Meta/Prereqs.pm ../../lib/CPAN/Meta/Prereqs.pm
cp lib/CPAN/Meta/History.pm ../../lib/CPAN/Meta/History.pm
cp lib/CPAN/Meta/Validator.pm ../../lib/CPAN/Meta/Validator.pm
cp lib/CPAN/Meta/Converter.pm ../../lib/CPAN/Meta/Converter.pm
cp lib/CPAN/Meta/Feature.pm ../../lib/CPAN/Meta/Feature.pm
cp lib/CPAN/Meta/Spec.pm ../../lib/CPAN/Meta/Spec.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
../miniperl -Ilib make_ext.pl cpan/CPAN-Meta-YAML/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CPAN::Meta::YAML (all)
Creating Makefile.PL in cpan/CPAN-Meta-YAML for CPAN::Meta::YAML
Running Makefile.PL in cpan/CPAN-Meta-YAML
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CPAN::Meta::YAML
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
Making all in cpan/CPAN-Meta-YAML
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
cp lib/CPAN/Meta/YAML.pm ../../lib/CPAN/Meta/YAML.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
../miniperl -Ilib make_ext.pl cpan/CPANPLUS/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CPANPLUS (all)
Running Makefile.PL in cpan/CPANPLUS
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CPANPLUS
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
Making all in cpan/CPANPLUS
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
cp lib/CPANPLUS/Backend/RV.pm ../../lib/CPANPLUS/Backend/RV.pm
cp lib/CPANPLUS/Shell/Default.pm ../../lib/CPANPLUS/Shell/Default.pm
cp lib/CPANPLUS/Module.pm ../../lib/CPANPLUS/Module.pm
cp lib/CPANPLUS/Module/Author.pm ../../lib/CPANPLUS/Module/Author.pm
cp lib/CPANPLUS/Module/Checksums.pm ../../lib/CPANPLUS/Module/Checksums.pm
cp lib/CPANPLUS/Dist/MM.pm ../../lib/CPANPLUS/Dist/MM.pm
cp lib/CPANPLUS/Internals.pm ../../lib/CPANPLUS/Internals.pm
cp lib/CPANPLUS/Module/Signature.pm ../../lib/CPANPLUS/Module/Signature.pm
cp lib/CPANPLUS/Hacking.pod ../../lib/CPANPLUS/Hacking.pod
cp lib/CPANPLUS.pm ../../lib/CPANPLUS.pm
cp lib/CPANPLUS/Shell/Default/Plugins/Remote.pm ../../lib/CPANPLUS/Shell/Default/Plugins/Remote.pm
cp lib/CPANPLUS/Config/System.pm ../../lib/CPANPLUS/Config/System.pm
cp lib/CPANPLUS/Backend.pm ../../lib/CPANPLUS/Backend.pm
cp lib/CPANPLUS/Internals/Report.pm ../../lib/CPANPLUS/Internals/Report.pm
cp lib/CPANPLUS/Module/Author/Fake.pm ../../lib/CPANPLUS/Module/Author/Fake.pm
cp lib/CPANPLUS/FAQ.pod ../../lib/CPANPLUS/FAQ.pod
cp lib/CPANPLUS/Config.pm ../../lib/CPANPLUS/Config.pm
cp lib/CPANPLUS/Internals/Utils.pm ../../lib/CPANPLUS/Internals/Utils.pm
cp lib/CPANPLUS/Shell/Default/Plugins/Source.pm ../../lib/CPANPLUS/Shell/Default/Plugins/Source.pm
cp lib/CPANPLUS/Internals/Constants/Report.pm ../../lib/CPANPLUS/Internals/Constants/Report.pm
cp lib/CPANPLUS/Configure/Setup.pm ../../lib/CPANPLUS/Configure/Setup.pm
cp lib/CPANPLUS/Shell.pm ../../lib/CPANPLUS/Shell.pm
cp lib/CPANPLUS/Internals/Source.pm ../../lib/CPANPLUS/Internals/Source.pm
cp lib/CPANPLUS/Internals/Fetch.pm ../../lib/CPANPLUS/Internals/Fetch.pm
cp lib/CPANPLUS/Shell/Classic.pm ../../lib/CPANPLUS/Shell/Classic.pm
cp lib/CPANPLUS/Dist.pm ../../lib/CPANPLUS/Dist.pm
cp lib/CPANPLUS/Configure.pm ../../lib/CPANPLUS/Configure.pm
cp lib/CPANPLUS/Selfupdate.pm ../../lib/CPANPLUS/Selfupdate.pm
cp lib/CPANPLUS/Internals/Search.pm ../../lib/CPANPLUS/Internals/Search.pm
cp lib/CPANPLUS/Internals/Extract.pm ../../lib/CPANPLUS/Internals/Extract.pm
cp lib/CPANPLUS/Internals/Source/SQLite/Tie.pm ../../lib/CPANPLUS/Internals/Source/SQLite/Tie.pm
cp lib/CPANPLUS/Dist/Sample.pm ../../lib/CPANPLUS/Dist/Sample.pm
cp lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm ../../lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm
cp lib/CPANPLUS/Internals/Utils/Autoflush.pm ../../lib/CPANPLUS/Internals/Utils/Autoflush.pm
cp lib/CPANPLUS/Module/Fake.pm ../../lib/CPANPLUS/Module/Fake.pm
cp lib/CPANPLUS/Error.pm ../../lib/CPANPLUS/Error.pm
cp lib/CPANPLUS/Internals/Source/SQLite.pm ../../lib/CPANPLUS/Internals/Source/SQLite.pm
cp lib/CPANPLUS/Internals/Source/Memory.pm ../../lib/CPANPLUS/Internals/Source/Memory.pm
cp lib/CPANPLUS/Dist/Autobundle.pm ../../lib/CPANPLUS/Dist/Autobundle.pm
cp lib/CPANPLUS/Dist/Base.pm ../../lib/CPANPLUS/Dist/Base.pm
cp lib/CPANPLUS/Internals/Constants.pm ../../lib/CPANPLUS/Internals/Constants.pm
cp lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod ../../lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod
cp bin/cpanp-run-perl blib/script/cpanp-run-perl
/tmp/buildd/perl-5.14.2/cpan/CPANPLUS/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpanp-run-perl
cp bin/cpan2dist blib/script/cpan2dist
/tmp/buildd/perl-5.14.2/cpan/CPANPLUS/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan2dist
cp bin/cpanp blib/script/cpanp
/tmp/buildd/perl-5.14.2/cpan/CPANPLUS/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpanp
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
../miniperl -Ilib make_ext.pl cpan/CPANPLUS-Dist-Build/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making CPANPLUS::Dist::Build (all)
Creating Makefile.PL in cpan/CPANPLUS-Dist-Build for CPANPLUS::Dist::Build
Running Makefile.PL in cpan/CPANPLUS-Dist-Build
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for CPANPLUS::Dist::Build
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
Making all in cpan/CPANPLUS-Dist-Build
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
cp lib/CPANPLUS/Dist/Build.pm ../../lib/CPANPLUS/Dist/Build.pm
cp lib/CPANPLUS/Dist/Build/Constants.pm ../../lib/CPANPLUS/Dist/Build/Constants.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
../miniperl -Ilib make_ext.pl dist/Devel-SelfStubber/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Devel::SelfStubber (all)
Creating Makefile.PL in dist/Devel-SelfStubber for Devel::SelfStubber
Running Makefile.PL in dist/Devel-SelfStubber
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Devel::SelfStubber
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
Making all in dist/Devel-SelfStubber
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
cp lib/Devel/SelfStubber.pm ../../lib/Devel/SelfStubber.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
../miniperl -Ilib make_ext.pl cpan/Digest/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Digest (all)
Creating Makefile.PL in cpan/Digest for Digest
Running Makefile.PL in cpan/Digest
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Digest
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
Making all in cpan/Digest
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
cp Digest.pm ../../lib/Digest.pm
cp Digest/file.pm ../../lib/Digest/file.pm
cp Digest/base.pm ../../lib/Digest/base.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
../miniperl -Ilib make_ext.pl dist/Dumpvalue/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Dumpvalue (all)
Creating Makefile.PL in dist/Dumpvalue for Dumpvalue
Running Makefile.PL in dist/Dumpvalue
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Dumpvalue
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
Making all in dist/Dumpvalue
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
cp lib/Dumpvalue.pm ../../lib/Dumpvalue.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
../miniperl -Ilib make_ext.pl dist/Env/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Env (all)
Creating Makefile.PL in dist/Env for Env
Running Makefile.PL in dist/Env
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Env
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Env'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Env'
Making all in dist/Env
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Env'
cp lib/Env.pm ../../lib/Env.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Env'
../miniperl -Ilib make_ext.pl ext/Errno/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Errno (all)
Running Makefile.PL in ext/Errno
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Errno
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Errno'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Errno'
Making all in ext/Errno
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Errno'
.../../miniperl "-I../../lib" "-I../../lib" Errno_pm.PL Errno.pm
cp Errno.pm ../../lib/Errno.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Errno'
../miniperl -Ilib make_ext.pl dist/ExtUtils-CBuilder/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::CBuilder (all)
Creating Makefile.PL in dist/ExtUtils-CBuilder for ExtUtils::CBuilder
Running Makefile.PL in dist/ExtUtils-CBuilder
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::CBuilder
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
Making all in dist/ExtUtils-CBuilder
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
cp lib/ExtUtils/CBuilder.pm ../../lib/ExtUtils/CBuilder.pm
cp lib/ExtUtils/CBuilder/Platform/Windows.pm ../../lib/ExtUtils/CBuilder/Platform/Windows.pm
cp lib/ExtUtils/CBuilder/Platform/aix.pm ../../lib/ExtUtils/CBuilder/Platform/aix.pm
cp lib/ExtUtils/CBuilder/Platform/cygwin.pm ../../lib/ExtUtils/CBuilder/Platform/cygwin.pm
cp lib/ExtUtils/CBuilder/Platform/Windows/GCC.pm ../../lib/ExtUtils/CBuilder/Platform/Windows/GCC.pm
cp lib/ExtUtils/CBuilder/Platform/VMS.pm ../../lib/ExtUtils/CBuilder/Platform/VMS.pm
cp lib/ExtUtils/CBuilder/Platform/Unix.pm ../../lib/ExtUtils/CBuilder/Platform/Unix.pm
cp lib/ExtUtils/CBuilder/Platform/Windows/BCC.pm ../../lib/ExtUtils/CBuilder/Platform/Windows/BCC.pm
cp lib/ExtUtils/CBuilder/Platform/Windows/MSVC.pm ../../lib/ExtUtils/CBuilder/Platform/Windows/MSVC.pm
cp lib/ExtUtils/CBuilder/Platform/darwin.pm ../../lib/ExtUtils/CBuilder/Platform/darwin.pm
cp lib/ExtUtils/CBuilder/Platform/dec_osf.pm ../../lib/ExtUtils/CBuilder/Platform/dec_osf.pm
cp lib/ExtUtils/CBuilder/Platform/os2.pm ../../lib/ExtUtils/CBuilder/Platform/os2.pm
cp lib/ExtUtils/CBuilder/Base.pm ../../lib/ExtUtils/CBuilder/Base.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
../miniperl -Ilib make_ext.pl dist/ExtUtils-Command/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::Command (all)
Creating Makefile.PL in dist/ExtUtils-Command for ExtUtils::Command
Running Makefile.PL in dist/ExtUtils-Command
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::Command
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
Making all in dist/ExtUtils-Command
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
cp lib/ExtUtils/Command.pm ../../lib/ExtUtils/Command.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
../miniperl -Ilib make_ext.pl cpan/ExtUtils-Constant/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::Constant (all)
Creating Makefile.PL in cpan/ExtUtils-Constant for ExtUtils::Constant
Running Makefile.PL in cpan/ExtUtils-Constant
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::Constant
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
Making all in cpan/ExtUtils-Constant
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
cp lib/ExtUtils/Constant/ProxySubs.pm ../../lib/ExtUtils/Constant/ProxySubs.pm
cp lib/ExtUtils/Constant/XS.pm ../../lib/ExtUtils/Constant/XS.pm
cp lib/ExtUtils/Constant/Utils.pm ../../lib/ExtUtils/Constant/Utils.pm
cp lib/ExtUtils/Constant/Base.pm ../../lib/ExtUtils/Constant/Base.pm
cp lib/ExtUtils/Constant.pm ../../lib/ExtUtils/Constant.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
../miniperl -Ilib make_ext.pl dist/ExtUtils-Install/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::Install (all)
Creating Makefile.PL in dist/ExtUtils-Install for ExtUtils::Install
Running Makefile.PL in dist/ExtUtils-Install
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::Install
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
Making all in dist/ExtUtils-Install
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
cp lib/ExtUtils/Installed.pm ../../lib/ExtUtils/Installed.pm
cp lib/ExtUtils/Install.pm ../../lib/ExtUtils/Install.pm
cp lib/ExtUtils/Packlist.pm ../../lib/ExtUtils/Packlist.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
../miniperl -Ilib make_ext.pl cpan/ExtUtils-MakeMaker/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::MakeMaker (all)
Creating Makefile.PL in cpan/ExtUtils-MakeMaker for ExtUtils::MakeMaker
Running Makefile.PL in cpan/ExtUtils-MakeMaker
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::MakeMaker
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
Making all in cpan/ExtUtils-MakeMaker
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
cp lib/ExtUtils/MM_OS2.pm ../../lib/ExtUtils/MM_OS2.pm
cp lib/ExtUtils/MakeMaker.pm ../../lib/ExtUtils/MakeMaker.pm
cp lib/ExtUtils/MM_VOS.pm ../../lib/ExtUtils/MM_VOS.pm
cp lib/ExtUtils/MM_Unix.pm ../../lib/ExtUtils/MM_Unix.pm
cp lib/ExtUtils/Mksymlists.pm ../../lib/ExtUtils/Mksymlists.pm
cp lib/ExtUtils/MM.pm ../../lib/ExtUtils/MM.pm
cp lib/ExtUtils/MM_Win32.pm ../../lib/ExtUtils/MM_Win32.pm
cp lib/ExtUtils/MM_UWIN.pm ../../lib/ExtUtils/MM_UWIN.pm
cp lib/ExtUtils/testlib.pm ../../lib/ExtUtils/testlib.pm
cp lib/ExtUtils/MM_DOS.pm ../../lib/ExtUtils/MM_DOS.pm
cp lib/ExtUtils/MM_Cygwin.pm ../../lib/ExtUtils/MM_Cygwin.pm
cp lib/ExtUtils/MY.pm ../../lib/ExtUtils/MY.pm
cp lib/ExtUtils/MM_MacOS.pm ../../lib/ExtUtils/MM_MacOS.pm
cp lib/ExtUtils/MM_Win95.pm ../../lib/ExtUtils/MM_Win95.pm
cp lib/ExtUtils/MM_VMS.pm ../../lib/ExtUtils/MM_VMS.pm
cp lib/ExtUtils/MM_BeOS.pm ../../lib/ExtUtils/MM_BeOS.pm
cp lib/ExtUtils/Liblist.pm ../../lib/ExtUtils/Liblist.pm
cp lib/ExtUtils/MM_AIX.pm ../../lib/ExtUtils/MM_AIX.pm
cp lib/ExtUtils/MM_Darwin.pm ../../lib/ExtUtils/MM_Darwin.pm
cp lib/ExtUtils/MakeMaker/Tutorial.pod ../../lib/ExtUtils/MakeMaker/Tutorial.pod
cp lib/ExtUtils/Mkbootstrap.pm ../../lib/ExtUtils/Mkbootstrap.pm
cp lib/ExtUtils/Liblist/Kid.pm ../../lib/ExtUtils/Liblist/Kid.pm
cp lib/ExtUtils/MakeMaker/YAML.pm ../../lib/ExtUtils/MakeMaker/YAML.pm
cp lib/ExtUtils/MM_QNX.pm ../../lib/ExtUtils/MM_QNX.pm
cp lib/ExtUtils/MakeMaker/FAQ.pod ../../lib/ExtUtils/MakeMaker/FAQ.pod
cp lib/ExtUtils/Command/MM.pm ../../lib/ExtUtils/Command/MM.pm
cp lib/ExtUtils/MakeMaker/Config.pm ../../lib/ExtUtils/MakeMaker/Config.pm
cp lib/ExtUtils/MM_NW5.pm ../../lib/ExtUtils/MM_NW5.pm
cp lib/ExtUtils/MM_Any.pm ../../lib/ExtUtils/MM_Any.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
../miniperl -Ilib make_ext.pl dist/ExtUtils-Manifest/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::Manifest (all)
Creating Makefile.PL in dist/ExtUtils-Manifest for ExtUtils::Manifest
Running Makefile.PL in dist/ExtUtils-Manifest
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::Manifest
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
Making all in dist/ExtUtils-Manifest
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
cp lib/ExtUtils/MANIFEST.SKIP ../../lib/ExtUtils/MANIFEST.SKIP
cp lib/ExtUtils/Manifest.pm ../../lib/ExtUtils/Manifest.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
../miniperl -Ilib make_ext.pl dist/ExtUtils-ParseXS/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making ExtUtils::ParseXS (all)
Creating Makefile.PL in dist/ExtUtils-ParseXS for ExtUtils::ParseXS
Running Makefile.PL in dist/ExtUtils-ParseXS
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for ExtUtils::ParseXS
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
Making all in dist/ExtUtils-ParseXS
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
cp lib/ExtUtils/ParseXS.pm ../../lib/ExtUtils/ParseXS.pm
cp lib/ExtUtils/xsubpp ../../lib/ExtUtils/xsubpp
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
../miniperl -Ilib make_ext.pl dist/File-CheckTree/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making File::CheckTree (all)
Creating Makefile.PL in dist/File-CheckTree for File::CheckTree
Running Makefile.PL in dist/File-CheckTree
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for File::CheckTree
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
Making all in dist/File-CheckTree
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
cp lib/File/CheckTree.pm ../../lib/File/CheckTree.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
../miniperl -Ilib make_ext.pl cpan/File-Fetch/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making File::Fetch (all)
Creating Makefile.PL in cpan/File-Fetch for File::Fetch
Running Makefile.PL in cpan/File-Fetch
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for File::Fetch
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
Making all in cpan/File-Fetch
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
cp lib/File/Fetch.pm ../../lib/File/Fetch.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
../miniperl -Ilib make_ext.pl cpan/File-Path/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making File::Path (all)
Creating Makefile.PL in cpan/File-Path for File::Path
Running Makefile.PL in cpan/File-Path
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for File::Path
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
Making all in cpan/File-Path
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
cp lib/File/Path.pm ../../lib/File/Path.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
../miniperl -Ilib make_ext.pl cpan/File-Temp/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making File::Temp (all)
Creating Makefile.PL in cpan/File-Temp for File::Temp
Running Makefile.PL in cpan/File-Temp
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for File::Temp
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
Making all in cpan/File-Temp
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
cp Temp.pm ../../lib/File/Temp.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
../miniperl -Ilib make_ext.pl ext/FileCache/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making FileCache (all)
Creating Makefile.PL in ext/FileCache for FileCache
Running Makefile.PL in ext/FileCache
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for FileCache
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
Making all in ext/FileCache
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
cp lib/FileCache.pm ../../lib/FileCache.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
../miniperl -Ilib make_ext.pl dist/Filter-Simple/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Filter::Simple (all)
Creating Makefile.PL in dist/Filter-Simple for Filter::Simple
Running Makefile.PL in dist/Filter-Simple
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Filter::Simple
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
Making all in dist/Filter-Simple
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
cp lib/Filter/Simple.pm ../../lib/Filter/Simple.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
../miniperl -Ilib make_ext.pl cpan/Getopt-Long/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Getopt::Long (all)
Creating Makefile.PL in cpan/Getopt-Long for Getopt::Long
Running Makefile.PL in cpan/Getopt-Long
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Getopt::Long
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
Making all in cpan/Getopt-Long
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
cp lib/Getopt/Long.pm ../../lib/Getopt/Long.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
../miniperl -Ilib make_ext.pl cpan/HTTP-Tiny/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making HTTP::Tiny (all)
Creating Makefile.PL in cpan/HTTP-Tiny for HTTP::Tiny
Running Makefile.PL in cpan/HTTP-Tiny
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for HTTP::Tiny
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
Making all in cpan/HTTP-Tiny
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
cp lib/HTTP/Tiny.pm ../../lib/HTTP/Tiny.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
../miniperl -Ilib make_ext.pl dist/I18N-Collate/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making I18N::Collate (all)
Creating Makefile.PL in dist/I18N-Collate for I18N::Collate
Running Makefile.PL in dist/I18N-Collate
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for I18N::Collate
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
Making all in dist/I18N-Collate
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
cp lib/I18N/Collate.pm ../../lib/I18N/Collate.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
../miniperl -Ilib make_ext.pl dist/I18N-LangTags/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making I18N::LangTags (all)
Creating Makefile.PL in dist/I18N-LangTags for I18N::LangTags
Running Makefile.PL in dist/I18N-LangTags
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for I18N::LangTags
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
Making all in dist/I18N-LangTags
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
cp lib/I18N/LangTags/List.pm ../../lib/I18N/LangTags/List.pm
cp lib/I18N/LangTags.pm ../../lib/I18N/LangTags.pm
cp lib/I18N/LangTags/Detect.pm ../../lib/I18N/LangTags/Detect.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
../miniperl -Ilib make_ext.pl cpan/IO-Compress/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making IO::Compress (all)
Running Makefile.PL in cpan/IO-Compress
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for IO::Compress
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
Making all in cpan/IO-Compress
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
cp lib/IO/Uncompress/Adapter/Bunzip2.pm ../../lib/IO/Uncompress/Adapter/Bunzip2.pm
cp lib/IO/Uncompress/RawInflate.pm ../../lib/IO/Uncompress/RawInflate.pm
cp lib/Compress/Zlib.pm ../../lib/Compress/Zlib.pm
cp lib/IO/Uncompress/Inflate.pm ../../lib/IO/Uncompress/Inflate.pm
cp lib/IO/Compress/Deflate.pm ../../lib/IO/Compress/Deflate.pm
cp lib/IO/Compress/Adapter/Deflate.pm ../../lib/IO/Compress/Adapter/Deflate.pm
cp lib/IO/Compress/Zip.pm ../../lib/IO/Compress/Zip.pm
cp lib/IO/Uncompress/Adapter/Identity.pm ../../lib/IO/Uncompress/Adapter/Identity.pm
cp lib/IO/Uncompress/Base.pm ../../lib/IO/Uncompress/Base.pm
cp lib/IO/Compress/Gzip/Constants.pm ../../lib/IO/Compress/Gzip/Constants.pm
cp lib/IO/Compress/Zlib/Extra.pm ../../lib/IO/Compress/Zlib/Extra.pm
cp lib/IO/Compress/Base.pm ../../lib/IO/Compress/Base.pm
cp lib/File/GlobMapper.pm ../../lib/File/GlobMapper.pm
cp lib/IO/Compress/Zip/Constants.pm ../../lib/IO/Compress/Zip/Constants.pm
cp lib/IO/Compress/Zlib/Constants.pm ../../lib/IO/Compress/Zlib/Constants.pm
cp lib/IO/Compress/Adapter/Identity.pm ../../lib/IO/Compress/Adapter/Identity.pm
cp lib/IO/Uncompress/Unzip.pm ../../lib/IO/Uncompress/Unzip.pm
cp lib/IO/Uncompress/Adapter/Inflate.pm ../../lib/IO/Uncompress/Adapter/Inflate.pm
cp lib/IO/Compress/Base/Common.pm ../../lib/IO/Compress/Base/Common.pm
cp lib/IO/Uncompress/Bunzip2.pm ../../lib/IO/Uncompress/Bunzip2.pm
cp lib/IO/Uncompress/Gunzip.pm ../../lib/IO/Uncompress/Gunzip.pm
cp lib/IO/Compress/Adapter/Bzip2.pm ../../lib/IO/Compress/Adapter/Bzip2.pm
cp lib/IO/Uncompress/AnyUncompress.pm ../../lib/IO/Uncompress/AnyUncompress.pm
cp lib/IO/Compress/RawDeflate.pm ../../lib/IO/Compress/RawDeflate.pm
cp lib/IO/Uncompress/AnyInflate.pm ../../lib/IO/Uncompress/AnyInflate.pm
cp lib/IO/Compress/Gzip.pm ../../lib/IO/Compress/Gzip.pm
cp lib/IO/Compress/Bzip2.pm ../../lib/IO/Compress/Bzip2.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
../miniperl -Ilib make_ext.pl cpan/IO-Zlib/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making IO::Zlib (all)
Creating Makefile.PL in cpan/IO-Zlib for IO::Zlib
Running Makefile.PL in cpan/IO-Zlib
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for IO::Zlib
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
Making all in cpan/IO-Zlib
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
cp Zlib.pm ../../lib/IO/Zlib.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
../miniperl -Ilib make_ext.pl cpan/IPC-Cmd/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making IPC::Cmd (all)
Creating Makefile.PL in cpan/IPC-Cmd for IPC::Cmd
Running Makefile.PL in cpan/IPC-Cmd
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for IPC::Cmd
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
Making all in cpan/IPC-Cmd
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
cp lib/IPC/Cmd.pm ../../lib/IPC/Cmd.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
../miniperl -Ilib make_ext.pl ext/IPC-Open2/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making IPC::Open2 (all)
Creating Makefile.PL in ext/IPC-Open2 for IPC::Open2
Running Makefile.PL in ext/IPC-Open2
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for IPC::Open2
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
Making all in ext/IPC-Open2
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
cp lib/IPC/Open2.pm ../../lib/IPC/Open2.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
../miniperl -Ilib make_ext.pl ext/IPC-Open3/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making IPC::Open3 (all)
Creating Makefile.PL in ext/IPC-Open3 for IPC::Open3
Running Makefile.PL in ext/IPC-Open3
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for IPC::Open3
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
Making all in ext/IPC-Open3
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
cp lib/IPC/Open3.pm ../../lib/IPC/Open3.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
../miniperl -Ilib make_ext.pl cpan/JSON-PP/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making JSON::PP (all)
Creating Makefile.PL in cpan/JSON-PP for JSON::PP
Running Makefile.PL in cpan/JSON-PP
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for JSON::PP
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
Making all in cpan/JSON-PP
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
cp lib/JSON/PP.pm ../../lib/JSON/PP.pm
cp lib/JSON/PP/Boolean.pm ../../lib/JSON/PP/Boolean.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
../miniperl -Ilib make_ext.pl cpan/Locale-Codes/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Locale::Codes (all)
Creating Makefile.PL in cpan/Locale-Codes for Locale::Codes
Running Makefile.PL in cpan/Locale-Codes
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Locale::Codes
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
Making all in cpan/Locale-Codes
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
cp lib/Locale/Country.pm ../../lib/Locale/Country.pm
cp lib/Locale/Codes/Country.pm ../../lib/Locale/Codes/Country.pm
cp lib/Locale/Constants.pod ../../lib/Locale/Constants.pod
cp lib/Locale/Codes/Script.pm ../../lib/Locale/Codes/Script.pm
cp lib/Locale/Currency.pod ../../lib/Locale/Currency.pod
cp lib/Locale/Codes.pod ../../lib/Locale/Codes.pod
cp lib/Locale/Codes/Language.pm ../../lib/Locale/Codes/Language.pm
cp lib/Locale/Currency.pm ../../lib/Locale/Currency.pm
cp lib/Locale/Script.pod ../../lib/Locale/Script.pod
cp lib/Locale/Codes/Changes.pod ../../lib/Locale/Codes/Changes.pod
cp lib/Locale/Language.pm ../../lib/Locale/Language.pm
cp lib/Locale/Codes/Currency.pm ../../lib/Locale/Codes/Currency.pm
cp lib/Locale/Constants.pm ../../lib/Locale/Constants.pm
cp lib/Locale/Script.pm ../../lib/Locale/Script.pm
cp lib/Locale/Country.pod ../../lib/Locale/Country.pod
cp lib/Locale/Language.pod ../../lib/Locale/Language.pod
cp lib/Locale/Codes.pm ../../lib/Locale/Codes.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
../miniperl -Ilib make_ext.pl dist/Locale-Maketext/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Locale::Maketext (all)
Creating Makefile.PL in dist/Locale-Maketext for Locale::Maketext
Running Makefile.PL in dist/Locale-Maketext
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Locale::Maketext
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
Making all in dist/Locale-Maketext
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
cp lib/Locale/Maketext/GutsLoader.pm ../../lib/Locale/Maketext/GutsLoader.pm
cp lib/Locale/Maketext/Guts.pm ../../lib/Locale/Maketext/Guts.pm
cp lib/Locale/Maketext/TPJ13.pod ../../lib/Locale/Maketext/TPJ13.pod
cp lib/Locale/Maketext/Cookbook.pod ../../lib/Locale/Maketext/Cookbook.pod
cp lib/Locale/Maketext.pod ../../lib/Locale/Maketext.pod
cp lib/Locale/Maketext.pm ../../lib/Locale/Maketext.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
../miniperl -Ilib make_ext.pl cpan/Locale-Maketext-Simple/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Locale::Maketext::Simple (all)
Creating Makefile.PL in cpan/Locale-Maketext-Simple for Locale::Maketext::Simple
Running Makefile.PL in cpan/Locale-Maketext-Simple
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Locale::Maketext::Simple
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
Making all in cpan/Locale-Maketext-Simple
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
cp lib/Locale/Maketext/Simple.pm ../../lib/Locale/Maketext/Simple.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
../miniperl -Ilib make_ext.pl cpan/Log-Message/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Log::Message (all)
Creating Makefile.PL in cpan/Log-Message for Log::Message
Running Makefile.PL in cpan/Log-Message
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Log::Message
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
Making all in cpan/Log-Message
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
cp lib/Log/Message/Config.pm ../../lib/Log/Message/Config.pm
cp lib/Log/Message/Handlers.pm ../../lib/Log/Message/Handlers.pm
cp lib/Log/Message.pm ../../lib/Log/Message.pm
cp lib/Log/Message/Item.pm ../../lib/Log/Message/Item.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
../miniperl -Ilib make_ext.pl cpan/Log-Message-Simple/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Log::Message::Simple (all)
Creating Makefile.PL in cpan/Log-Message-Simple for Log::Message::Simple
Running Makefile.PL in cpan/Log-Message-Simple
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Log::Message::Simple
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
Making all in cpan/Log-Message-Simple
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
cp lib/Log/Message/Simple.pm ../../lib/Log/Message/Simple.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
../miniperl -Ilib make_ext.pl dist/Math-BigInt/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Math::BigInt (all)
Creating Makefile.PL in dist/Math-BigInt for Math::BigInt
Running Makefile.PL in dist/Math-BigInt
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Math::BigInt
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
Making all in dist/Math-BigInt
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
cp lib/Math/BigInt.pm ../../lib/Math/BigInt.pm
cp lib/Math/BigInt/CalcEmu.pm ../../lib/Math/BigInt/CalcEmu.pm
cp lib/Math/BigFloat.pm ../../lib/Math/BigFloat.pm
cp lib/Math/BigInt/Calc.pm ../../lib/Math/BigInt/Calc.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
../miniperl -Ilib make_ext.pl dist/Math-BigRat/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Math::BigRat (all)
Creating Makefile.PL in dist/Math-BigRat for Math::BigRat
Running Makefile.PL in dist/Math-BigRat
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Math::BigRat
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
Making all in dist/Math-BigRat
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
cp lib/Math/BigRat.pm ../../lib/Math/BigRat.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
../miniperl -Ilib make_ext.pl cpan/Math-Complex/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Math::Complex (all)
Creating Makefile.PL in cpan/Math-Complex for Math::Complex
Running Makefile.PL in cpan/Math-Complex
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Math::Complex
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
Making all in cpan/Math-Complex
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
cp lib/Math/Complex.pm ../../lib/Math/Complex.pm
cp lib/Math/Trig.pm ../../lib/Math/Trig.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
../miniperl -Ilib make_ext.pl cpan/Memoize/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Memoize (all)
Creating Makefile.PL in cpan/Memoize for Memoize
Running Makefile.PL in cpan/Memoize
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Memoize
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
Making all in cpan/Memoize
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
cp Memoize.pm ../../lib/Memoize.pm
cp Memoize/ExpireFile.pm ../../lib/Memoize/ExpireFile.pm
cp Memoize/ExpireTest.pm ../../lib/Memoize/ExpireTest.pm
cp Memoize/NDBM_File.pm ../../lib/Memoize/NDBM_File.pm
cp Memoize/AnyDBM_File.pm ../../lib/Memoize/AnyDBM_File.pm
cp Memoize/Expire.pm ../../lib/Memoize/Expire.pm
cp Memoize/Storable.pm ../../lib/Memoize/Storable.pm
cp Memoize/SDBM_File.pm ../../lib/Memoize/SDBM_File.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
../miniperl -Ilib make_ext.pl cpan/Module-Build/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Build (all)
Creating Makefile.PL in cpan/Module-Build for Module::Build
Running Makefile.PL in cpan/Module-Build
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Build
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
Making all in cpan/Module-Build
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
cp lib/Module/Build/Version.pm ../../lib/Module/Build/Version.pm
cp lib/Module/Build/Platform/darwin.pm ../../lib/Module/Build/Platform/darwin.pm
cp lib/Module/Build/Platform/MacOS.pm ../../lib/Module/Build/Platform/MacOS.pm
cp lib/Module/Build/Dumper.pm ../../lib/Module/Build/Dumper.pm
cp lib/Module/Build/Notes.pm ../../lib/Module/Build/Notes.pm
cp lib/Module/Build/Compat.pm ../../lib/Module/Build/Compat.pm
cp lib/Module/Build/Platform/RiscOS.pm ../../lib/Module/Build/Platform/RiscOS.pm
cp lib/Module/Build/ConfigData.pm ../../lib/Module/Build/ConfigData.pm
cp lib/Module/Build/PodParser.pm ../../lib/Module/Build/PodParser.pm
cp lib/Module/Build/Platform/VOS.pm ../../lib/Module/Build/Platform/VOS.pm
cp lib/Module/Build/Platform/Windows.pm ../../lib/Module/Build/Platform/Windows.pm
cp lib/inc/latest.pm ../../lib/inc/latest.pm
cp lib/Module/Build/Bundling.pod ../../lib/Module/Build/Bundling.pod
cp lib/Module/Build/Platform/Unix.pm ../../lib/Module/Build/Platform/Unix.pm
cp lib/Module/Build/ModuleInfo.pm ../../lib/Module/Build/ModuleInfo.pm
cp lib/Module/Build/Platform/Amiga.pm ../../lib/Module/Build/Platform/Amiga.pm
cp lib/Module/Build/Config.pm ../../lib/Module/Build/Config.pm
cp lib/Module/Build/Platform/os2.pm ../../lib/Module/Build/Platform/os2.pm
cp lib/Module/Build/Base.pm ../../lib/Module/Build/Base.pm
cp lib/Module/Build/Platform/MPEiX.pm ../../lib/Module/Build/Platform/MPEiX.pm
cp lib/Module/Build/Platform/VMS.pm ../../lib/Module/Build/Platform/VMS.pm
cp lib/Module/Build/Platform/cygwin.pm ../../lib/Module/Build/Platform/cygwin.pm
cp lib/Module/Build/Platform/EBCDIC.pm ../../lib/Module/Build/Platform/EBCDIC.pm
cp lib/Module/Build.pm ../../lib/Module/Build.pm
cp lib/Module/Build/PPMMaker.pm ../../lib/Module/Build/PPMMaker.pm
cp lib/Module/Build/Platform/aix.pm ../../lib/Module/Build/Platform/aix.pm
cp lib/Module/Build/Cookbook.pm ../../lib/Module/Build/Cookbook.pm
cp lib/Module/Build/Authoring.pod ../../lib/Module/Build/Authoring.pod
cp lib/inc/latest/private.pm ../../lib/inc/latest/private.pm
cp lib/Module/Build/Platform/Default.pm ../../lib/Module/Build/Platform/Default.pm
cp lib/Module/Build/YAML.pm ../../lib/Module/Build/YAML.pm
cp lib/Module/Build/API.pod ../../lib/Module/Build/API.pod
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
../miniperl -Ilib make_ext.pl dist/Module-CoreList/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::CoreList (all)
Running Makefile.PL in dist/Module-CoreList
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::CoreList
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
Making all in dist/Module-CoreList
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
cp lib/Module/CoreList.pm ../../lib/Module/CoreList.pm
cp corelist blib/script/corelist
/tmp/buildd/perl-5.14.2/dist/Module-CoreList/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/corelist
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
../miniperl -Ilib make_ext.pl cpan/Module-Load/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Load (all)
Creating Makefile.PL in cpan/Module-Load for Module::Load
Running Makefile.PL in cpan/Module-Load
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Load
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
Making all in cpan/Module-Load
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
cp lib/Module/Load.pm ../../lib/Module/Load.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
../miniperl -Ilib make_ext.pl cpan/Module-Load-Conditional/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Load::Conditional (all)
Creating Makefile.PL in cpan/Module-Load-Conditional for Module::Load::Conditional
Running Makefile.PL in cpan/Module-Load-Conditional
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Load::Conditional
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
Making all in cpan/Module-Load-Conditional
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
cp lib/Module/Load/Conditional.pm ../../lib/Module/Load/Conditional.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
../miniperl -Ilib make_ext.pl cpan/Module-Loaded/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Loaded (all)
Creating Makefile.PL in cpan/Module-Loaded for Module::Loaded
Running Makefile.PL in cpan/Module-Loaded
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Loaded
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
Making all in cpan/Module-Loaded
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
cp lib/Module/Loaded.pm ../../lib/Module/Loaded.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
../miniperl -Ilib make_ext.pl cpan/Module-Metadata/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Metadata (all)
Creating Makefile.PL in cpan/Module-Metadata for Module::Metadata
Running Makefile.PL in cpan/Module-Metadata
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Metadata
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
Making all in cpan/Module-Metadata
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
cp lib/Module/Metadata.pm ../../lib/Module/Metadata.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
../miniperl -Ilib make_ext.pl cpan/Module-Pluggable/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Module::Pluggable (all)
Running Makefile.PL in cpan/Module-Pluggable
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Module::Pluggable
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
Making all in cpan/Module-Pluggable
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
cp lib/Module/Pluggable/Object.pm ../../lib/Module/Pluggable/Object.pm
cp lib/Devel/InnerPackage.pm ../../lib/Devel/InnerPackage.pm
cp lib/Module/Pluggable.pm ../../lib/Module/Pluggable.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
../miniperl -Ilib make_ext.pl cpan/NEXT/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making NEXT (all)
Creating Makefile.PL in cpan/NEXT for NEXT
Running Makefile.PL in cpan/NEXT
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for NEXT
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
Making all in cpan/NEXT
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
cp lib/NEXT.pm ../../lib/NEXT.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
../miniperl -Ilib make_ext.pl dist/Net-Ping/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Net::Ping (all)
Creating Makefile.PL in dist/Net-Ping for Net::Ping
Running Makefile.PL in dist/Net-Ping
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Net::Ping
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
Making all in dist/Net-Ping
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
cp lib/Net/Ping.pm ../../lib/Net/Ping.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
../miniperl -Ilib make_ext.pl cpan/Object-Accessor/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Object::Accessor (all)
Creating Makefile.PL in cpan/Object-Accessor for Object::Accessor
Running Makefile.PL in cpan/Object-Accessor
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Object::Accessor
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
Making all in cpan/Object-Accessor
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
cp lib/Object/Accessor.pm ../../lib/Object/Accessor.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
../miniperl -Ilib make_ext.pl cpan/Package-Constants/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Package::Constants (all)
Creating Makefile.PL in cpan/Package-Constants for Package::Constants
Running Makefile.PL in cpan/Package-Constants
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Package::Constants
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
Making all in cpan/Package-Constants
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
cp lib/Package/Constants.pm ../../lib/Package/Constants.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
../miniperl -Ilib make_ext.pl cpan/Params-Check/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Params::Check (all)
Creating Makefile.PL in cpan/Params-Check for Params::Check
Running Makefile.PL in cpan/Params-Check
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Params::Check
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
Making all in cpan/Params-Check
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
cp lib/Params/Check.pm ../../lib/Params/Check.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
../miniperl -Ilib make_ext.pl cpan/Parse-CPAN-Meta/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Parse::CPAN::Meta (all)
Creating Makefile.PL in cpan/Parse-CPAN-Meta for Parse::CPAN::Meta
Running Makefile.PL in cpan/Parse-CPAN-Meta
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Parse::CPAN::Meta
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
Making all in cpan/Parse-CPAN-Meta
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
cp lib/Parse/CPAN/Meta.pm ../../lib/Parse/CPAN/Meta.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
../miniperl -Ilib make_ext.pl cpan/Perl-OSType/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Perl::OSType (all)
Creating Makefile.PL in cpan/Perl-OSType for Perl::OSType
Running Makefile.PL in cpan/Perl-OSType
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Perl::OSType
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
Making all in cpan/Perl-OSType
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
cp lib/Perl/OSType.pm ../../lib/Perl/OSType.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
../miniperl -Ilib make_ext.pl cpan/PerlIO-via-QuotedPrint/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making PerlIO::via::QuotedPrint (all)
Creating Makefile.PL in cpan/PerlIO-via-QuotedPrint for PerlIO::via::QuotedPrint
Running Makefile.PL in cpan/PerlIO-via-QuotedPrint
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for PerlIO::via::QuotedPrint
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
Making all in cpan/PerlIO-via-QuotedPrint
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
cp lib/PerlIO/via/QuotedPrint.pm ../../lib/PerlIO/via/QuotedPrint.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
../miniperl -Ilib make_ext.pl cpan/Pod-Escapes/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::Escapes (all)
Creating Makefile.PL in cpan/Pod-Escapes for Pod::Escapes
Running Makefile.PL in cpan/Pod-Escapes
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::Escapes
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
Making all in cpan/Pod-Escapes
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
cp lib/Pod/Escapes.pm ../../lib/Pod/Escapes.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
../miniperl -Ilib make_ext.pl ext/Pod-Html/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::Html (all)
Creating Makefile.PL in ext/Pod-Html for Pod::Html
Running Makefile.PL in ext/Pod-Html
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::Html
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
Making all in ext/Pod-Html
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
cp Html.pm ../../lib/Pod/Html.pm
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" pod2html.PL pod2html
Extracting pod2html (with variable substitutions)
cp pod2html blib/script/pod2html
/tmp/buildd/perl-5.14.2/ext/Pod-Html/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2html
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
../miniperl -Ilib make_ext.pl cpan/Pod-LaTeX/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::LaTeX (all)
Creating Makefile.PL in cpan/Pod-LaTeX for Pod::LaTeX
Running Makefile.PL in cpan/Pod-LaTeX
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::LaTeX
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
Making all in cpan/Pod-LaTeX
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
cp lib/Pod/LaTeX.pm ../../lib/Pod/LaTeX.pm
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" pod2latex.PL pod2latex
Extracting pod2latex (with variable substitutions)
cp pod2latex blib/script/pod2latex
/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2latex
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
../miniperl -Ilib make_ext.pl cpan/Pod-Parser/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::Parser (all)
Creating Makefile.PL in cpan/Pod-Parser for Pod::Parser
Running Makefile.PL in cpan/Pod-Parser
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::Parser
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
Making all in cpan/Pod-Parser
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
cp lib/Pod/InputObjects.pm ../../lib/Pod/InputObjects.pm
cp lib/Pod/Select.pm ../../lib/Pod/Select.pm
cp lib/Pod/Checker.pm ../../lib/Pod/Checker.pm
cp lib/Pod/PlainText.pm ../../lib/Pod/PlainText.pm
cp lib/Pod/ParseUtils.pm ../../lib/Pod/ParseUtils.pm
cp lib/Pod/Find.pm ../../lib/Pod/Find.pm
cp lib/Pod/Usage.pm ../../lib/Pod/Usage.pm
cp lib/Pod/Parser.pm ../../lib/Pod/Parser.pm
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" podchecker.PL podchecker
Extracting podchecker (with variable substitutions)
cp podchecker blib/script/podchecker
/tmp/buildd/perl-5.14.2/cpan/Pod-Parser/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/podchecker
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" pod2usage.PL pod2usage
Extracting pod2usage (with variable substitutions)
cp pod2usage blib/script/pod2usage
/tmp/buildd/perl-5.14.2/cpan/Pod-Parser/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2usage
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" podselect.PL podselect
Extracting podselect (with variable substitutions)
cp podselect blib/script/podselect
/tmp/buildd/perl-5.14.2/cpan/Pod-Parser/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/podselect
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
../miniperl -Ilib make_ext.pl dist/Pod-Perldoc/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::Perldoc (all)
Creating Makefile.PL in dist/Pod-Perldoc for Pod::Perldoc
Running Makefile.PL in dist/Pod-Perldoc
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::Perldoc
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
Making all in dist/Pod-Perldoc
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
cp lib/Pod/Perldoc/ToNroff.pm ../../lib/Pod/Perldoc/ToNroff.pm
cp lib/Pod/Perldoc/ToTk.pm ../../lib/Pod/Perldoc/ToTk.pm
cp lib/Pod/Perldoc/ToText.pm ../../lib/Pod/Perldoc/ToText.pm
cp lib/Pod/Perldoc.pm ../../lib/Pod/Perldoc.pm
cp lib/Pod/Perldoc/BaseTo.pm ../../lib/Pod/Perldoc/BaseTo.pm
cp lib/Pod/Perldoc/ToMan.pm ../../lib/Pod/Perldoc/ToMan.pm
cp lib/Pod/Perldoc/ToRtf.pm ../../lib/Pod/Perldoc/ToRtf.pm
cp lib/Pod/Perldoc/GetOptsOO.pm ../../lib/Pod/Perldoc/GetOptsOO.pm
cp lib/Pod/Perldoc/ToChecker.pm ../../lib/Pod/Perldoc/ToChecker.pm
cp lib/Pod/Perldoc/ToXml.pm ../../lib/Pod/Perldoc/ToXml.pm
cp lib/Pod/Perldoc/ToPod.pm ../../lib/Pod/Perldoc/ToPod.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
../miniperl -Ilib make_ext.pl cpan/Pod-Simple/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Pod::Simple (all)
Creating Makefile.PL in cpan/Pod-Simple for Pod::Simple
Running Makefile.PL in cpan/Pod-Simple
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod::Simple
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
Making all in cpan/Pod-Simple
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
cp lib/Pod/Simple/LinkSection.pm ../../lib/Pod/Simple/LinkSection.pm
cp lib/Pod/Simple/DumpAsText.pm ../../lib/Pod/Simple/DumpAsText.pm
cp lib/Pod/Simple/Progress.pm ../../lib/Pod/Simple/Progress.pm
cp lib/Pod/Simple/XMLOutStream.pm ../../lib/Pod/Simple/XMLOutStream.pm
cp lib/Pod/Simple/TextContent.pm ../../lib/Pod/Simple/TextContent.pm
cp lib/Pod/Simple/Search.pm ../../lib/Pod/Simple/Search.pm
cp lib/Pod/Simple/TranscodeSmart.pm ../../lib/Pod/Simple/TranscodeSmart.pm
cp lib/Pod/Simple/Text.pm ../../lib/Pod/Simple/Text.pm
cp lib/Pod/Simple/PullParserStartToken.pm ../../lib/Pod/Simple/PullParserStartToken.pm
cp lib/Pod/Simple/Debug.pm ../../lib/Pod/Simple/Debug.pm
cp lib/Pod/Simple/Methody.pm ../../lib/Pod/Simple/Methody.pm
cp lib/Pod/Simple/PullParserEndToken.pm ../../lib/Pod/Simple/PullParserEndToken.pm
cp lib/Pod/Simple/PullParserTextToken.pm ../../lib/Pod/Simple/PullParserTextToken.pm
cp lib/Pod/Simple.pm ../../lib/Pod/Simple.pm
cp lib/Pod/Simple/HTMLBatch.pm ../../lib/Pod/Simple/HTMLBatch.pm
cp lib/Pod/Simple/TranscodeDumb.pm ../../lib/Pod/Simple/TranscodeDumb.pm
cp lib/Pod/Simple/RTF.pm ../../lib/Pod/Simple/RTF.pm
cp lib/Pod/Simple/Checker.pm ../../lib/Pod/Simple/Checker.pm
cp lib/Pod/Simple/PullParser.pm ../../lib/Pod/Simple/PullParser.pm
cp lib/Pod/Simple/PullParserToken.pm ../../lib/Pod/Simple/PullParserToken.pm
cp lib/Pod/Simple/SimpleTree.pm ../../lib/Pod/Simple/SimpleTree.pm
cp lib/Pod/Simple/TiedOutFH.pm ../../lib/Pod/Simple/TiedOutFH.pm
cp lib/Pod/Simple/XHTML.pm ../../lib/Pod/Simple/XHTML.pm
cp lib/Pod/Simple/HTML.pm ../../lib/Pod/Simple/HTML.pm
cp lib/Pod/Simple/Subclassing.pod ../../lib/Pod/Simple/Subclassing.pod
cp lib/Pod/Simple.pod ../../lib/Pod/Simple.pod
cp lib/Pod/Simple/DumpAsXML.pm ../../lib/Pod/Simple/DumpAsXML.pm
cp lib/Pod/Simple/BlackBox.pm ../../lib/Pod/Simple/BlackBox.pm
cp lib/Pod/Simple/HTMLLegacy.pm ../../lib/Pod/Simple/HTMLLegacy.pm
cp lib/Pod/Simple/Transcode.pm ../../lib/Pod/Simple/Transcode.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
../miniperl -Ilib make_ext.pl dist/Safe/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Safe (all)
Running Makefile.PL in dist/Safe
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Safe
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Safe'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Safe'
Making all in dist/Safe
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Safe'
cp Safe.pm ../../lib/Safe.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Safe'
../miniperl -Ilib make_ext.pl dist/SelfLoader/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making SelfLoader (all)
Creating Makefile.PL in dist/SelfLoader for SelfLoader
Running Makefile.PL in dist/SelfLoader
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for SelfLoader
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
Making all in dist/SelfLoader
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
cp lib/SelfLoader.pm ../../lib/SelfLoader.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
../miniperl -Ilib make_ext.pl cpan/Shell/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Shell (all)
Creating Makefile.PL in cpan/Shell for Shell
Running Makefile.PL in cpan/Shell
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Shell
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
Making all in cpan/Shell
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
cp Shell.pm ../../lib/Shell.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
../miniperl -Ilib make_ext.pl cpan/Term-ANSIColor/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Term::ANSIColor (all)
Creating Makefile.PL in cpan/Term-ANSIColor for Term::ANSIColor
Running Makefile.PL in cpan/Term-ANSIColor
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Term::ANSIColor
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
Making all in cpan/Term-ANSIColor
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
cp ANSIColor.pm ../../lib/Term/ANSIColor.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
../miniperl -Ilib make_ext.pl cpan/Term-Cap/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Term::Cap (all)
Creating Makefile.PL in cpan/Term-Cap for Term::Cap
Running Makefile.PL in cpan/Term-Cap
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Term::Cap
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
Making all in cpan/Term-Cap
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
cp Cap.pm ../../lib/Term/Cap.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
../miniperl -Ilib make_ext.pl cpan/Term-UI/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Term::UI (all)
Creating Makefile.PL in cpan/Term-UI for Term::UI
Running Makefile.PL in cpan/Term-UI
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Term::UI
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
Making all in cpan/Term-UI
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
cp lib/Term/UI/History.pm ../../lib/Term/UI/History.pm
cp lib/Term/UI.pm ../../lib/Term/UI.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
../miniperl -Ilib make_ext.pl cpan/Test/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Test (all)
Creating Makefile.PL in cpan/Test for Test
Running Makefile.PL in cpan/Test
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Test
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test'
Making all in cpan/Test
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test'
cp lib/Test.pm ../../lib/Test.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test'
../miniperl -Ilib make_ext.pl cpan/Test-Harness/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Test::Harness (all)
Creating Makefile.PL in cpan/Test-Harness for Test::Harness
Running Makefile.PL in cpan/Test-Harness
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Test::Harness
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
Making all in cpan/Test-Harness
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
cp lib/TAP/Parser/Result/Pragma.pm ../../lib/TAP/Parser/Result/Pragma.pm
cp lib/App/Prove/State/Result.pm ../../lib/App/Prove/State/Result.pm
cp lib/TAP/Parser/Iterator/Array.pm ../../lib/TAP/Parser/Iterator/Array.pm
cp lib/TAP/Base.pm ../../lib/TAP/Base.pm
cp lib/TAP/Formatter/Console/ParallelSession.pm ../../lib/TAP/Formatter/Console/ParallelSession.pm
cp lib/TAP/Parser/Result.pm ../../lib/TAP/Parser/Result.pm
cp lib/TAP/Formatter/Console/Session.pm ../../lib/TAP/Formatter/Console/Session.pm
cp lib/TAP/Parser/Scheduler/Job.pm ../../lib/TAP/Parser/Scheduler/Job.pm
cp lib/TAP/Parser/Result/YAML.pm ../../lib/TAP/Parser/Result/YAML.pm
cp lib/TAP/Parser.pm ../../lib/TAP/Parser.pm
cp lib/TAP/Parser/SourceHandler/Handle.pm ../../lib/TAP/Parser/SourceHandler/Handle.pm
cp lib/TAP/Parser/IteratorFactory.pm ../../lib/TAP/Parser/IteratorFactory.pm
cp lib/TAP/Parser/Iterator.pm ../../lib/TAP/Parser/Iterator.pm
cp lib/TAP/Formatter/Color.pm ../../lib/TAP/Formatter/Color.pm
cp lib/TAP/Parser/Iterator/Process.pm ../../lib/TAP/Parser/Iterator/Process.pm
cp lib/TAP/Parser/Grammar.pm ../../lib/TAP/Parser/Grammar.pm
cp lib/Test/Harness.pm ../../lib/Test/Harness.pm
cp lib/TAP/Formatter/File/Session.pm ../../lib/TAP/Formatter/File/Session.pm
cp lib/TAP/Formatter/Base.pm ../../lib/TAP/Formatter/Base.pm
cp lib/TAP/Parser/ResultFactory.pm ../../lib/TAP/Parser/ResultFactory.pm
cp lib/TAP/Parser/Utils.pm ../../lib/TAP/Parser/Utils.pm
cp lib/TAP/Parser/Result/Bailout.pm ../../lib/TAP/Parser/Result/Bailout.pm
cp lib/TAP/Object.pm ../../lib/TAP/Object.pm
cp lib/TAP/Parser/Multiplexer.pm ../../lib/TAP/Parser/Multiplexer.pm
cp lib/TAP/Parser/SourceHandler/Perl.pm ../../lib/TAP/Parser/SourceHandler/Perl.pm
cp lib/TAP/Parser/YAMLish/Writer.pm ../../lib/TAP/Parser/YAMLish/Writer.pm
cp lib/TAP/Parser/Result/Version.pm ../../lib/TAP/Parser/Result/Version.pm
cp lib/TAP/Parser/Result/Unknown.pm ../../lib/TAP/Parser/Result/Unknown.pm
cp lib/TAP/Parser/YAMLish/Reader.pm ../../lib/TAP/Parser/YAMLish/Reader.pm
cp lib/TAP/Parser/Scheduler.pm ../../lib/TAP/Parser/Scheduler.pm
cp lib/TAP/Parser/Result/Plan.pm ../../lib/TAP/Parser/Result/Plan.pm
cp lib/TAP/Parser/SourceHandler.pm ../../lib/TAP/Parser/SourceHandler.pm
cp lib/TAP/Parser/SourceHandler/Executable.pm ../../lib/TAP/Parser/SourceHandler/Executable.pm
cp lib/TAP/Parser/Result/Test.pm ../../lib/TAP/Parser/Result/Test.pm
cp lib/App/Prove/State/Result/Test.pm ../../lib/App/Prove/State/Result/Test.pm
cp lib/TAP/Parser/SourceHandler/RawTAP.pm ../../lib/TAP/Parser/SourceHandler/RawTAP.pm
cp lib/TAP/Parser/Result/Comment.pm ../../lib/TAP/Parser/Result/Comment.pm
cp lib/TAP/Parser/Iterator/Stream.pm ../../lib/TAP/Parser/Iterator/Stream.pm
cp lib/TAP/Parser/SourceHandler/File.pm ../../lib/TAP/Parser/SourceHandler/File.pm
cp lib/TAP/Harness/Beyond.pod ../../lib/TAP/Harness/Beyond.pod
cp lib/TAP/Formatter/Session.pm ../../lib/TAP/Formatter/Session.pm
cp lib/App/Prove.pm ../../lib/App/Prove.pm
cp lib/App/Prove/State.pm ../../lib/App/Prove/State.pm
cp lib/TAP/Harness.pm ../../lib/TAP/Harness.pm
cp lib/TAP/Formatter/File.pm ../../lib/TAP/Formatter/File.pm
cp lib/TAP/Parser/Aggregator.pm ../../lib/TAP/Parser/Aggregator.pm
cp lib/TAP/Parser/Scheduler/Spinner.pm ../../lib/TAP/Parser/Scheduler/Spinner.pm
cp lib/TAP/Formatter/Console.pm ../../lib/TAP/Formatter/Console.pm
cp lib/TAP/Parser/Source.pm ../../lib/TAP/Parser/Source.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
../miniperl -Ilib make_ext.pl cpan/Test-Simple/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Test::Simple (all)
Creating Makefile.PL in cpan/Test-Simple for Test::Simple
Running Makefile.PL in cpan/Test-Simple
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Test::Simple
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
Making all in cpan/Test-Simple
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
cp lib/Test/Builder/Tester/Color.pm ../../lib/Test/Builder/Tester/Color.pm
cp lib/Test/Builder.pm ../../lib/Test/Builder.pm
cp lib/Test/Simple.pm ../../lib/Test/Simple.pm
cp lib/Test/More.pm ../../lib/Test/More.pm
cp lib/Test/Builder/Tester.pm ../../lib/Test/Builder/Tester.pm
cp lib/Test/Builder/Module.pm ../../lib/Test/Builder/Module.pm
cp lib/Test/Tutorial.pod ../../lib/Test/Tutorial.pod
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
../miniperl -Ilib make_ext.pl cpan/Text-Balanced/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Text::Balanced (all)
Creating Makefile.PL in cpan/Text-Balanced for Text::Balanced
Running Makefile.PL in cpan/Text-Balanced
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Text::Balanced
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
Making all in cpan/Text-Balanced
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
cp lib/Text/Balanced.pm ../../lib/Text/Balanced.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
../miniperl -Ilib make_ext.pl cpan/Text-ParseWords/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Text::ParseWords (all)
Creating Makefile.PL in cpan/Text-ParseWords for Text::ParseWords
Running Makefile.PL in cpan/Text-ParseWords
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Text::ParseWords
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
Making all in cpan/Text-ParseWords
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
cp lib/Text/ParseWords.pm ../../lib/Text/ParseWords.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
../miniperl -Ilib make_ext.pl cpan/Text-Tabs/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Text::Tabs (all)
Creating Makefile.PL in cpan/Text-Tabs for Text::Tabs
Running Makefile.PL in cpan/Text-Tabs
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Text::Tabs
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
Making all in cpan/Text-Tabs
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
cp lib/Text/Tabs.pm ../../lib/Text/Tabs.pm
cp lib/Text/Wrap.pm ../../lib/Text/Wrap.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
../miniperl -Ilib make_ext.pl dist/Thread-Queue/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Thread::Queue (all)
Creating Makefile.PL in dist/Thread-Queue for Thread::Queue
Running Makefile.PL in dist/Thread-Queue
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Thread::Queue
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
Making all in dist/Thread-Queue
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
cp lib/Thread/Queue.pm ../../lib/Thread/Queue.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
../miniperl -Ilib make_ext.pl dist/Thread-Semaphore/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Thread::Semaphore (all)
Creating Makefile.PL in dist/Thread-Semaphore for Thread::Semaphore
Running Makefile.PL in dist/Thread-Semaphore
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Thread::Semaphore
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
Making all in dist/Thread-Semaphore
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
cp lib/Thread/Semaphore.pm ../../lib/Thread/Semaphore.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
../miniperl -Ilib make_ext.pl cpan/Tie-File/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Tie::File (all)
Creating Makefile.PL in cpan/Tie-File for Tie::File
Running Makefile.PL in cpan/Tie-File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Tie::File
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
Making all in cpan/Tie-File
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
cp lib/Tie/File.pm ../../lib/Tie/File.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
../miniperl -Ilib make_ext.pl ext/Tie-Memoize/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Tie::Memoize (all)
Creating Makefile.PL in ext/Tie-Memoize for Tie::Memoize
Running Makefile.PL in ext/Tie-Memoize
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Tie::Memoize
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
Making all in ext/Tie-Memoize
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
cp lib/Tie/Memoize.pm ../../lib/Tie/Memoize.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
../miniperl -Ilib make_ext.pl cpan/Tie-RefHash/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Tie::RefHash (all)
Creating Makefile.PL in cpan/Tie-RefHash for Tie::RefHash
Running Makefile.PL in cpan/Tie-RefHash
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Tie::RefHash
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
Making all in cpan/Tie-RefHash
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
cp lib/Tie/RefHash.pm ../../lib/Tie/RefHash.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
../miniperl -Ilib make_ext.pl cpan/Time-Local/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Time::Local (all)
Creating Makefile.PL in cpan/Time-Local for Time::Local
Running Makefile.PL in cpan/Time-Local
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Time::Local
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
Making all in cpan/Time-Local
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
cp lib/Time/Local.pm ../../lib/Time/Local.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
../miniperl -Ilib make_ext.pl cpan/Version-Requirements/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making Version::Requirements (all)
Creating Makefile.PL in cpan/Version-Requirements for Version::Requirements
Running Makefile.PL in cpan/Version-Requirements
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Version::Requirements
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
Making all in cpan/Version-Requirements
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
cp lib/Version/Requirements.pm ../../lib/Version/Requirements.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
../miniperl -Ilib make_ext.pl dist/XSLoader/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making XSLoader (all)
Running Makefile.PL in dist/XSLoader
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for XSLoader
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
Making all in dist/XSLoader
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
.../../miniperl "-I../../lib" "-I../../lib" XSLoader_pm.PL XSLoader.pm
cp XSLoader.pm ../../lib/XSLoader.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
../miniperl -Ilib make_ext.pl cpan/autodie/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making autodie (all)
Creating Makefile.PL in cpan/autodie for autodie
Running Makefile.PL in cpan/autodie
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for autodie
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
Making all in cpan/autodie
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
cp lib/Fatal.pm ../../lib/Fatal.pm
cp lib/autodie/exception.pm ../../lib/autodie/exception.pm
cp lib/autodie/hints.pm ../../lib/autodie/hints.pm
cp lib/autodie.pm ../../lib/autodie.pm
cp lib/autodie/exception/system.pm ../../lib/autodie/exception/system.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
../miniperl -Ilib make_ext.pl dist/autouse/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making autouse (all)
Creating Makefile.PL in dist/autouse for autouse
Running Makefile.PL in dist/autouse
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for autouse
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/autouse'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/autouse'
Making all in dist/autouse
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/autouse'
cp lib/autouse.pm ../../lib/autouse.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/autouse'
../miniperl -Ilib make_ext.pl dist/base/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making base (all)
Creating Makefile.PL in dist/base for base
Running Makefile.PL in dist/base
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for base
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/base'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/base'
Making all in dist/base
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/base'
cp lib/fields.pm ../../lib/fields.pm
cp lib/base.pm ../../lib/base.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/base'
../miniperl -Ilib make_ext.pl dist/bignum/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making bignum (all)
Creating Makefile.PL in dist/bignum for bignum
Running Makefile.PL in dist/bignum
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for bignum
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/bignum'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/bignum'
Making all in dist/bignum
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/bignum'
cp lib/bignum.pm ../../lib/bignum.pm
cp lib/bigrat.pm ../../lib/bigrat.pm
cp lib/Math/BigFloat/Trace.pm ../../lib/Math/BigFloat/Trace.pm
cp lib/bigint.pm ../../lib/bigint.pm
cp lib/Math/BigInt/Trace.pm ../../lib/Math/BigInt/Trace.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/bignum'
../miniperl -Ilib make_ext.pl dist/constant/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making constant (all)
Creating Makefile.PL in dist/constant for constant
Running Makefile.PL in dist/constant
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for constant
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/constant'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/constant'
Making all in dist/constant
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/constant'
cp lib/constant.pm ../../lib/constant.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/constant'
../miniperl -Ilib make_ext.pl cpan/encoding-warnings/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making encoding::warnings (all)
Creating Makefile.PL in cpan/encoding-warnings for encoding::warnings
Running Makefile.PL in cpan/encoding-warnings
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for encoding::warnings
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
Making all in cpan/encoding-warnings
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
cp lib/encoding/warnings.pm ../../lib/encoding/warnings.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
../miniperl -Ilib make_ext.pl dist/if/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making if (all)
Creating Makefile.PL in dist/if for if
Running Makefile.PL in dist/if
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for if
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/if'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/if'
Making all in dist/if
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/if'
cp if.pm ../../lib/if.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/if'
../miniperl -Ilib make_ext.pl dist/lib/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making lib (all)
Running Makefile.PL in dist/lib
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for lib
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/lib'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/lib'
Making all in dist/lib
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/dist/lib'
.../../miniperl "-I../../lib" "-I../../lib" lib_pm.PL lib.pm
Extracting lib.pm (with variable substitutions)
cp lib.pm ../../lib/lib.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/lib'
../miniperl -Ilib make_ext.pl cpan/libnet/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making libnet (all)
Running Makefile.PL in cpan/libnet
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Net
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
Making all in cpan/libnet
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
cp Net/POP3.pm ../../lib/Net/POP3.pm
cp Net/SMTP.pm ../../lib/Net/SMTP.pm
cp Net/Config.pm ../../lib/Net/Config.pm
cp Net/FTP/dataconn.pm ../../lib/Net/FTP/dataconn.pm
cp Net/libnetFAQ.pod ../../lib/Net/libnetFAQ.pod
cp Net/Domain.pm ../../lib/Net/Domain.pm
cp Net/FTP/E.pm ../../lib/Net/FTP/E.pm
cp Net/Cmd.pm ../../lib/Net/Cmd.pm
cp Net/FTP.pm ../../lib/Net/FTP.pm
cp Net/Netrc.pm ../../lib/Net/Netrc.pm
cp Net/FTP/L.pm ../../lib/Net/FTP/L.pm
cp Net/FTP/A.pm ../../lib/Net/FTP/A.pm
cp Net/NNTP.pm ../../lib/Net/NNTP.pm
cp Net/Time.pm ../../lib/Net/Time.pm
cp Net/FTP/I.pm ../../lib/Net/FTP/I.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
../miniperl -Ilib make_ext.pl cpan/parent/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making parent (all)
Creating Makefile.PL in cpan/parent for parent
Running Makefile.PL in cpan/parent
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for parent
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/parent'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/parent'
Making all in cpan/parent
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/parent'
cp lib/parent.pm ../../lib/parent.pm
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/parent'
../miniperl -Ilib make_ext.pl cpan/podlators/pm_to_blib MAKE=/usr/bin/make LIBPERL_A=libperl.a
Making podlators (all)
Creating Makefile.PL in cpan/podlators for podlators
Running Makefile.PL in cpan/podlators
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
Writing Makefile for Pod
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
Making all in cpan/podlators
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
cp lib/Pod/ParseLink.pm ../../lib/Pod/ParseLink.pm
cp lib/Pod/Text/Termcap.pm ../../lib/Pod/Text/Termcap.pm
cp lib/Pod/Text.pm ../../lib/Pod/Text.pm
cp lib/Pod/Text/Color.pm ../../lib/Pod/Text/Color.pm
cp lib/Pod/Text/Overstrike.pm ../../lib/Pod/Text/Overstrike.pm
cp lib/Pod/Man.pm ../../lib/Pod/Man.pm
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" pod2text.PL pod2text
Extracting pod2text (with variable substitutions)
cp pod2text blib/script/pod2text
/tmp/buildd/perl-5.14.2/cpan/podlators/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2text
.../../miniperl "-I../../lib" "-I../../lib" "-I../../lib" "-I../../lib" pod2man.PL pod2man
Extracting pod2man (with variable substitutions)
cp pod2man blib/script/pod2man
/tmp/buildd/perl-5.14.2/cpan/podlators/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2man
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
../miniperl -Ilib make_ext.pl DynaLoader.o MAKE=/usr/bin/make LIBPERL_A=libperl.a LINKTYPE=static CCCDLFLAGS=
Making DynaLoader (all)
Running Makefile.PL in ext/DynaLoader
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a LINKTYPE=static CCCDLFLAGS=
Processing hints file hints/linux.pl
Writing Makefile for DynaLoader
Writing MYMETA.yml
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
Making all in ext/DynaLoader
/usr/bin/make all PERL_CORE=1 LIBPERL_A=libperl.a LINKTYPE=static CCCDLFLAGS=
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
.../../miniperl "-I../../lib" "-I../../lib" DynaLoader_pm.PL DynaLoader.pm
cp DynaLoader.pm ../../lib/DynaLoader.pm
rm -f DynaLoader.xs
cp dl_dlopen.xs DynaLoader.xs
.../../miniperl "-I../../lib" "-I../../lib" ../../lib/ExtUtils/xsubpp -noprototypes -typemap ../../lib/ExtUtils/typemap DynaLoader.xs > DynaLoader.xsc && mv DynaLoader.xsc DynaLoader.c
cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"1.13\" -DXS_VERSION=\"1.13\" "-I../.." -DLIBC="" DynaLoader.c
rm -rf ../../DynaLoader.o
cp DynaLoader.o ../../DynaLoader.o
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
rm -f libperl.a
/usr/bin/ar rcu libperl.a op.o perl.o gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o keywords.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o DynaLoader.o
cc -o perl -fstack-protector -L/usr/local/lib -Wl,-E perlmain.o libperl.a `cat ext.libs` -ldl -lm -lpthread -lc -lcrypt
make[1]: Leaving directory `/tmp/buildd/perl-5.14.2'
mv perl perl.debug
test -d debian
[ ! -f Makefile ] || /usr/bin/make distclean
make[1]: Entering directory `/tmp/buildd/perl-5.14.2'
make[2]: Entering directory `/tmp/buildd/perl-5.14.2'
cd os2; rm -f Makefile
cd pod; /usr/bin/make distclean
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/pod'
rm -f perl.man perl5004delta.man perl5005delta.man perl5100delta.man perl5101delta.man perl5110delta.man perl5111delta.man perl5112delta.man perl5113delta.man perl5114delta.man perl5115delta.man perl5120delta.man perl5121delta.man perl5122delta.man perl5123delta.man perl5130delta.man perl51310delta.man perl51311delta.man perl5131delta.man perl5132delta.man perl5133delta.man perl5134delta.man perl5135delta.man perl5136delta.man perl5137delta.man perl5138delta.man perl5139delta.man perl5140delta.man perl5141delta.man perl561delta.man perl56delta.man perl570delta.man perl571delta.man perl572delta.man perl573delta.man perl581delta.man perl582delta.man perl583delta.man perl584delta.man perl585delta.man perl586delta.man perl587delta.man perl588delta.man perl589delta.man perl58delta.man perl590delta.man perl591delta.man perl592delta.man perl593delta.man perl594delta.man perl595delta.man perlapio.man perlartistic.man perlbook.man perlboot.man perlbot.man perlcall.man perlcheat.man perlclib.man perlcommunity.man perlcompile.man perldata.man perldbmfilter.man perldebguts.man perldebtut.man perldebug.man perldelta.man perldiag.man perldoc.man perldsc.man perlebcdic.man perlembed.man perlfaq.man perlfaq1.man perlfaq2.man perlfaq3.man perlfaq4.man perlfaq5.man perlfaq6.man perlfaq7.man perlfaq8.man perlfaq9.man perlfilter.man perlfork.man perlform.man perlfunc.man perlgit.man perlglossary.man perlgpl.man perlguts.man perlhack.man perlhacktips.man perlhacktut.man perlhist.man perlinterp.man perlintro.man perliol.man perlipc.man perllexwarn.man perllocale.man perllol.man perlmod.man perlmodinstall.man perlmodstyle.man perlmroapi.man perlnewmod.man perlnumber.man perlobj.man perlop.man perlopentut.man perlpacktut.man perlperf.man perlpod.man perlpodspec.man perlpodstyle.man perlpolicy.man perlport.man perlpragma.man perlre.man perlreapi.man perlrebackslash.man perlrecharclass.man perlref.man perlreftut.man perlreguts.man perlrequick.man perlreref.man perlretut.man perlrun.man perlsec.man perlsource.man perlstyle.man perlsub.man perlsyn.man perlthrtut.man perltie.man perltodo.man perltooc.man perltoot.man perltrap.man perlunicode.man perlunifaq.man perluniintro.man perlunitut.man perlutil.man perlvar.man perlvms.man perlxs.man perlxstut.man
rm -f perl.html perl5004delta.html perl5005delta.html perl5100delta.html perl5101delta.html perl5110delta.html perl5111delta.html perl5112delta.html perl5113delta.html perl5114delta.html perl5115delta.html perl5120delta.html perl5121delta.html perl5122delta.html perl5123delta.html perl5130delta.html perl51310delta.html perl51311delta.html perl5131delta.html perl5132delta.html perl5133delta.html perl5134delta.html perl5135delta.html perl5136delta.html perl5137delta.html perl5138delta.html perl5139delta.html perl5140delta.html perl5141delta.html perl561delta.html perl56delta.html perl570delta.html perl571delta.html perl572delta.html perl573delta.html perl581delta.html perl582delta.html perl583delta.html perl584delta.html perl585delta.html perl586delta.html perl587delta.html perl588delta.html perl589delta.html perl58delta.html perl590delta.html perl591delta.html perl592delta.html perl593delta.html perl594delta.html perl595delta.html perlapio.html perlartistic.html perlbook.html perlboot.html perlbot.html perlcall.html perlcheat.html perlclib.html perlcommunity.html perlcompile.html perldata.html perldbmfilter.html perldebguts.html perldebtut.html perldebug.html perldelta.html perldiag.html perldoc.html perldsc.html perlebcdic.html perlembed.html perlfaq.html perlfaq1.html perlfaq2.html perlfaq3.html perlfaq4.html perlfaq5.html perlfaq6.html perlfaq7.html perlfaq8.html perlfaq9.html perlfilter.html perlfork.html perlform.html perlfunc.html perlgit.html perlglossary.html perlgpl.html perlguts.html perlhack.html perlhacktips.html perlhacktut.html perlhist.html perlinterp.html perlintro.html perliol.html perlipc.html perllexwarn.html perllocale.html perllol.html perlmod.html perlmodinstall.html perlmodstyle.html perlmroapi.html perlnewmod.html perlnumber.html perlobj.html perlop.html perlopentut.html perlpacktut.html perlperf.html perlpod.html perlpodspec.html perlpodstyle.html perlpolicy.html perlport.html perlpragma.html perlre.html perlreapi.html perlrebackslash.html perlrecharclass.html perlref.html perlreftut.html perlreguts.html perlrequick.html perlreref.html perlretut.html perlrun.html perlsec.html perlsource.html perlstyle.html perlsub.html perlsyn.html perlthrtut.html perltie.html perltodo.html perltooc.html perltoot.html perltrap.html perlunicode.html perlunifaq.html perluniintro.html perlunitut.html perlutil.html perlvar.html perlvms.html perlxs.html perlxstut.html
rm -f perl.tex perl5004delta.tex perl5005delta.tex perl5100delta.tex perl5101delta.tex perl5110delta.tex perl5111delta.tex perl5112delta.tex perl5113delta.tex perl5114delta.tex perl5115delta.tex perl5120delta.tex perl5121delta.tex perl5122delta.tex perl5123delta.tex perl5130delta.tex perl51310delta.tex perl51311delta.tex perl5131delta.tex perl5132delta.tex perl5133delta.tex perl5134delta.tex perl5135delta.tex perl5136delta.tex perl5137delta.tex perl5138delta.tex perl5139delta.tex perl5140delta.tex perl5141delta.tex perl561delta.tex perl56delta.tex perl570delta.tex perl571delta.tex perl572delta.tex perl573delta.tex perl581delta.tex perl582delta.tex perl583delta.tex perl584delta.tex perl585delta.tex perl586delta.tex perl587delta.tex perl588delta.tex perl589delta.tex perl58delta.tex perl590delta.tex perl591delta.tex perl592delta.tex perl593delta.tex perl594delta.tex perl595delta.tex perlapio.tex perlartistic.tex perlbook.tex perlboot.tex perlbot.tex perlcall.tex perlcheat.tex perlclib.tex perlcommunity.tex perlcompile.tex perldata.tex perldbmfilter.tex perldebguts.tex perldebtut.tex perldebug.tex perldelta.tex perldiag.tex perldoc.tex perldsc.tex perlebcdic.tex perlembed.tex perlfaq.tex perlfaq1.tex perlfaq2.tex perlfaq3.tex perlfaq4.tex perlfaq5.tex perlfaq6.tex perlfaq7.tex perlfaq8.tex perlfaq9.tex perlfilter.tex perlfork.tex perlform.tex perlfunc.tex perlgit.tex perlglossary.tex perlgpl.tex perlguts.tex perlhack.tex perlhacktips.tex perlhacktut.tex perlhist.tex perlinterp.tex perlintro.tex perliol.tex perlipc.tex perllexwarn.tex perllocale.tex perllol.tex perlmod.tex perlmodinstall.tex perlmodstyle.tex perlmroapi.tex perlnewmod.tex perlnumber.tex perlobj.tex perlop.tex perlopentut.tex perlpacktut.tex perlperf.tex perlpod.tex perlpodspec.tex perlpodstyle.tex perlpolicy.tex perlport.tex perlpragma.tex perlre.tex perlreapi.tex perlrebackslash.tex perlrecharclass.tex perlref.tex perlreftut.tex perlreguts.tex perlrequick.tex perlreref.tex perlretut.tex perlrun.tex perlsec.tex perlsource.tex perlstyle.tex perlsub.tex perlsyn.tex perlthrtut.tex perltie.tex perltodo.tex perltooc.tex perltoot.tex perltrap.tex perlunicode.tex perlunifaq.tex perluniintro.tex perlunitut.tex perlutil.tex perlvar.tex perlvms.tex perlxs.tex perlxstut.tex
rm -f pod2html-*cache
rm -f *.aux *.log *.exe
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/pod'
cd utils; /usr/bin/make distclean
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/utils'
rm -rf c2ph config_data corelist cpan h2ph h2xs instmodsh json_pp perlbug perldoc perlivp pl2pm prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum splain dprofpp libnetcfg piconv enc2xs xsubpp pstruct ./c2ph ./config_data ./corelist ./cpan ./h2ph ./h2xs ./json_pp ./instmodsh ./perlbug ./perldoc ./perlivp ./pl2pm ./prove ./ptar ./ptardiff ./ptargrep ./cpanp-run-perl ./cpanp ./cpan2dist ./shasum ./splain ./dprofpp ./libnetcfg ./piconv ./enc2xs ./xsubpp
rm -f ../t/_h2ph_pre.ph
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/utils'
cd x2p; /usr/bin/make distclean
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
rm -f a2p psed *.o find2perl.exe s2p.exe find2perl.c s2p.c a2p.loadmap
rmdir .depending
rmdir: failed to remove `.depending': No such file or directory
make[3]: [realclean] Error 1 (ignored)
rm -f core Makefile cflags find2perl s2p all malloc.c
rm -f makefile makefile.old makefile.old
rm -f *~ *.orig
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
Making DynaLoader (distclean)
Making distclean in ext/DynaLoader
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
rm -f \
dl_symbian.c dl_none.c \
core.[0-9] dl_vms.c \
DynaLoader.bso pm_to_blib.ts \
dl_mpeix.c core.[0-9][0-9][0-9][0-9] \
MYMETA.yml perl \
tmon.out *.o \
pm_to_blib blibdirs.ts \
dl_next.c dl_dld.c \
dl_dllload.c *perl.core \
core.*perl.*.? dl_vmesa.c \
DynaLoader.def core.[0-9][0-9][0-9] \
mon.out dl_dyld.c \
libDynaLoader.def perl.exe \
perlmain.c so_locations \
DynaLoader.exp *.a \
core dl_aix.c \
../../lib/auto/DynaLoader/extralibs.all core.[0-9][0-9] \
DynaLoader.x \
dl_win32.c ../../lib/auto/DynaLoader/extralibs.ld \
core.[0-9][0-9][0-9][0-9][0-9] dl_beos.c \
Makefile.aperl perl \
dl_hpux.c dl_dlopen.c
rm -rf \
DynaLoader.c DynaLoader.pm \
DynaLoader.xs blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
DynaLoader.o ../../lib/DynaLoader.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/DynaLoader ../../lib/auto/DynaLoader \
DynaLoader-1.13
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: dl_aix.xs
Not in MANIFEST: dl_beos.xs
Not in MANIFEST: dl_dld.xs
Not in MANIFEST: dl_dllload.xs
Not in MANIFEST: dl_dlopen.xs
Not in MANIFEST: dl_dyld.xs
Not in MANIFEST: dl_hpux.xs
Not in MANIFEST: dl_mpeix.xs
Not in MANIFEST: dl_next.xs
Not in MANIFEST: dl_none.xs
Not in MANIFEST: dl_symbian.xs
Not in MANIFEST: dl_vmesa.xs
Not in MANIFEST: dl_vms.xs
Not in MANIFEST: dl_win32.xs
Not in MANIFEST: dlutils.c
Not in MANIFEST: DynaLoader_pm.PL
Not in MANIFEST: hints/aix.pl
Not in MANIFEST: hints/gnukfreebsd.pl
Not in MANIFEST: hints/gnuknetbsd.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: hints/netbsd.pl
Not in MANIFEST: hints/openbsd.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: README
Not in MANIFEST: t/DynaLoader.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/DynaLoader'
Making B (distclean)
Running Makefile.PL in ext/B
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for B
Writing MYMETA.yml
Making distclean in ext/B
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/B'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/B/extralibs.all \
core.[0-9][0-9] B.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml B.x \
B.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/B/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
B.c Makefile.aperl \
B.def perl \
core.[0-9][0-9][0-9] mon.out \
libB.def perlmain.c \
perl.exe so_locations \
B.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
B.o ../../lib/O.pm \
../../lib/B.pm Makefile.old \
../../lib/B/Xref.pm ../../lib/B/Concise.pm \
../../lib/B/Terse.pm Makefile \
../../lib/B/Showlex.pm
rm -rf \
../../lib/auto/B const-c.inc \
../../lib/auto/B const-xs.inc \
B-1.29
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: B.pm
Not in MANIFEST: B.xs
Not in MANIFEST: B/Concise.pm
Not in MANIFEST: B/Showlex.pm
Not in MANIFEST: B/Terse.pm
Not in MANIFEST: B/Xref.pm
Not in MANIFEST: hints/darwin.pl
Not in MANIFEST: hints/openbsd.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: O.pm
Not in MANIFEST: t/b.t
Not in MANIFEST: t/concise-xs.t
Not in MANIFEST: t/concise.t
Not in MANIFEST: t/f_map
Not in MANIFEST: t/f_map.t
Not in MANIFEST: t/f_sort
Not in MANIFEST: t/f_sort.t
Not in MANIFEST: t/o.t
Not in MANIFEST: t/optree_check.t
Not in MANIFEST: t/optree_concise.t
Not in MANIFEST: t/optree_constants.t
Not in MANIFEST: t/optree_misc.t
Not in MANIFEST: t/optree_samples.t
Not in MANIFEST: t/optree_sort.t
Not in MANIFEST: t/optree_specials.t
Not in MANIFEST: t/optree_varinit.t
Not in MANIFEST: t/OptreeCheck.pm
Not in MANIFEST: t/pragma.t
Not in MANIFEST: t/showlex.t
Not in MANIFEST: t/terse.t
Not in MANIFEST: t/walkoptree.t
Not in MANIFEST: t/xref.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/B'
Making Compress::Raw::Bzip2 (distclean)
Running Makefile.PL in cpan/Compress-Raw-Bzip2
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Compress::Raw::Bzip2
Writing MYMETA.yml
Making distclean in cpan/Compress-Raw-Bzip2
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Compress-Raw-Bzip2'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Compress/Raw/Bzip2/extralibs.all \
core.[0-9][0-9] Bzip2.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Bzip2.x \
Bzip2.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Compress/Raw/Bzip2/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl Bzip2.def \
perl core.[0-9][0-9][0-9] \
mon.out libBzip2.def \
perlmain.c perl.exe \
so_locations Bzip2.exp \
Bzip2.c
rm -rf \
bzlib.h constants.xs \
constants.h bzlib_private.h \
*.c blib \
bzip2.h
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Bzip2.o ../../lib/Compress/Raw/Bzip2.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Compress/Raw/Bzip2 ../../lib/auto/Compress/Raw/Bzip2 \
Compress-Raw-Bzip2-2.033
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bzip2-src/blocksort.c
Not in MANIFEST: bzip2-src/bzlib.c
Not in MANIFEST: bzip2-src/bzlib.h
Not in MANIFEST: bzip2-src/bzlib_private.h
Not in MANIFEST: bzip2-src/compress.c
Not in MANIFEST: bzip2-src/crctable.c
Not in MANIFEST: bzip2-src/decompress.c
Not in MANIFEST: bzip2-src/huffman.c
Not in MANIFEST: bzip2-src/LICENSE
Not in MANIFEST: bzip2-src/randtable.c
Not in MANIFEST: Bzip2.xs
Not in MANIFEST: Changes
Not in MANIFEST: fallback/constants.h
Not in MANIFEST: fallback/constants.xs
Not in MANIFEST: lib/Compress/Raw/Bzip2.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: pod/FAQ.pod
Not in MANIFEST: private/MakeUtil.pm
Not in MANIFEST: README
Not in MANIFEST: t/000prereq.t
Not in MANIFEST: t/01bzip2.t
Not in MANIFEST: t/09limitoutput.t
Not in MANIFEST: t/99pod.t
Not in MANIFEST: t/compress/CompTestUtils.pm
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Compress-Raw-Bzip2'
Making Compress::Raw::Zlib (distclean)
Running Makefile.PL in cpan/Compress-Raw-Zlib
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Parsing config.in...
Auto Detect Gzip OS Code..
Setting Gzip OS Code to 3 [Unix/Default]
Looks Good.
Writing Makefile for Compress::Raw::Zlib
Writing MYMETA.yml
Making distclean in cpan/Compress-Raw-Zlib
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Compress-Raw-Zlib'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Compress/Raw/Zlib/extralibs.all \
core.[0-9][0-9] Zlib.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Zlib.x \
Zlib.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Compress/Raw/Zlib/extralibs.ld \
Zlib.c blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Zlib.def perl \
core.[0-9][0-9][0-9] mon.out \
libZlib.def perlmain.c \
perl.exe so_locations \
Zlib.exp
rm -rf \
constants.xs constants.h \
*.c blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Compress/Raw/Zlib.pm Zlib.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Compress/Raw/Zlib ../../lib/auto/Compress/Raw/Zlib \
Compress-Raw-Zlib-2.033
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: config.in
Not in MANIFEST: examples/filtdef
Not in MANIFEST: examples/filtinf
Not in MANIFEST: fallback/constants.h
Not in MANIFEST: fallback/constants.xs
Not in MANIFEST: lib/Compress/Raw/Zlib.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: pod/FAQ.pod
Not in MANIFEST: private/MakeUtil.pm
Not in MANIFEST: README
Not in MANIFEST: t/01version.t
Not in MANIFEST: t/02zlib.t
Not in MANIFEST: t/07bufsize.t
Not in MANIFEST: t/09limitoutput.t
Not in MANIFEST: t/18lvalue.t
Not in MANIFEST: t/compress/CompTestUtils.pm
Not in MANIFEST: typemap
Not in MANIFEST: zlib-src/adler32.c
Not in MANIFEST: zlib-src/compress.c
Not in MANIFEST: zlib-src/crc32.c
Not in MANIFEST: zlib-src/crc32.h
Not in MANIFEST: zlib-src/deflate.c
Not in MANIFEST: zlib-src/deflate.h
Not in MANIFEST: zlib-src/infback.c
Not in MANIFEST: zlib-src/inffast.c
Not in MANIFEST: zlib-src/inffast.h
Not in MANIFEST: zlib-src/inffixed.h
Not in MANIFEST: zlib-src/inflate.c
Not in MANIFEST: zlib-src/inflate.h
Not in MANIFEST: zlib-src/inftrees.c
Not in MANIFEST: zlib-src/inftrees.h
Not in MANIFEST: zlib-src/trees.c
Not in MANIFEST: zlib-src/trees.h
Not in MANIFEST: zlib-src/uncompr.c
Not in MANIFEST: zlib-src/zconf.h
Not in MANIFEST: zlib-src/zlib.h
Not in MANIFEST: zlib-src/zutil.c
Not in MANIFEST: zlib-src/zutil.h
Not in MANIFEST: Zlib.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Compress-Raw-Zlib'
Making Cwd (distclean)
Creating Makefile.PL in dist/Cwd for Cwd
Running Makefile.PL in dist/Cwd
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Cwd
Writing MYMETA.yml
Making distclean in dist/Cwd
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Cwd'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Cwd/extralibs.all \
core.[0-9][0-9] Cwd.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Cwd.x \
Cwd.bs Cwd.c \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Cwd/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Cwd.def perl \
core.[0-9][0-9][0-9] mon.out \
libCwd.def perlmain.c \
perl.exe so_locations \
Cwd.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/File/Spec/Unix.pm ../../lib/File/Spec.pm \
../../lib/File/Spec/VMS.pm Cwd.o \
../../lib/File/Spec/Cygwin.pm ../../lib/File/Spec/Mac.pm \
../../lib/File/Spec/Win32.pm ../../lib/File/Spec/Functions.pm \
Makefile.old ../../lib/File/Spec/OS2.pm \
../../lib/Cwd.pm Makefile \
../../lib/File/Spec/Epoc.pm
rm -rf \
../../lib/auto/Cwd ../../lib/auto/Cwd \
Cwd-3.36 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Cwd.pm
Not in MANIFEST: Cwd.xs
Not in MANIFEST: lib/File/Spec.pm
Not in MANIFEST: lib/File/Spec/Cygwin.pm
Not in MANIFEST: lib/File/Spec/Epoc.pm
Not in MANIFEST: lib/File/Spec/Functions.pm
Not in MANIFEST: lib/File/Spec/Mac.pm
Not in MANIFEST: lib/File/Spec/OS2.pm
Not in MANIFEST: lib/File/Spec/Unix.pm
Not in MANIFEST: lib/File/Spec/VMS.pm
Not in MANIFEST: lib/File/Spec/Win32.pm
Not in MANIFEST: t/crossplatform.t
Not in MANIFEST: t/cwd.t
Not in MANIFEST: t/Functions.t
Not in MANIFEST: t/rel2abs2rel.t
Not in MANIFEST: t/Spec.t
Not in MANIFEST: t/taint.t
Not in MANIFEST: t/tmpdir.t
Not in MANIFEST: t/win32.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Cwd'
Making DB_File (distclean)
Running Makefile.PL in cpan/DB_File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Parsing config.in...
Looks Good.
Writing Makefile for DB_File
Writing MYMETA.yml
Making distclean in cpan/DB_File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/DB_File'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/DB_File/extralibs.all \
core.[0-9][0-9] DB_File.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml DB_File.x \
DB_File.bs perl \
tmon.out *.o \
DB_File.c pm_to_blib \
../../lib/auto/DB_File/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
DB_File.def perl \
core.[0-9][0-9][0-9] mon.out \
libDB_File.def perlmain.c \
perl.exe so_locations \
DB_File.exp
rm -rf \
constants.xs constants.h \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
version.o DB_File.o ../../lib/DB_File.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/DB_File ../../lib/auto/DB_File \
DB_File-1.821
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: config.in
Not in MANIFEST: DB_File.pm
Not in MANIFEST: DB_File.xs
Not in MANIFEST: DB_File_BS
Not in MANIFEST: dbinfo
Not in MANIFEST: hints/dynixptx.pl
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/db-btree.t
Not in MANIFEST: t/db-hash.t
Not in MANIFEST: t/db-recno.t
Not in MANIFEST: typemap
Not in MANIFEST: version.c
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/DB_File'
Making Data::Dumper (distclean)
Creating Makefile.PL in dist/Data-Dumper for Data::Dumper
Running Makefile.PL in dist/Data-Dumper
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Data::Dumper
Writing MYMETA.yml
Making distclean in dist/Data-Dumper
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Data-Dumper'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Data/Dumper/extralibs.all \
core.[0-9][0-9] Dumper.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Dumper.x \
Dumper.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Data/Dumper/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Dumper.c Makefile.aperl \
Dumper.def perl \
core.[0-9][0-9][0-9] mon.out \
libDumper.def perlmain.c \
perl.exe so_locations \
Dumper.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Data/Dumper.pm Dumper.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Data/Dumper ../../lib/auto/Data/Dumper \
Data-Dumper-2.130_02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Dumper.pm
Not in MANIFEST: Dumper.xs
Not in MANIFEST: t/bless.t
Not in MANIFEST: t/bugs.t
Not in MANIFEST: t/dumper.t
Not in MANIFEST: t/freezer.t
Not in MANIFEST: t/overload.t
Not in MANIFEST: t/pair.t
Not in MANIFEST: t/perl-74170.t
Not in MANIFEST: t/terse.t
Not in MANIFEST: Todo
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Data-Dumper'
Making Devel::DProf (distclean)
Creating Makefile.PL in cpan/Devel-DProf for Devel::DProf
Running Makefile.PL in cpan/Devel-DProf
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Devel::DProf
Writing MYMETA.yml
Making distclean in cpan/Devel-DProf
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Devel-DProf'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Devel/DProf/extralibs.all \
core.[0-9][0-9] DProf.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml DProf.x \
DProf.bs perl \
tmon.out *.o \
pm_to_blib DProf.c \
../../lib/auto/Devel/DProf/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
DProf.def perl \
core.[0-9][0-9][0-9] mon.out \
libDProf.def perlmain.c \
perl.exe so_locations \
DProf.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
DProf.o ../../lib/Devel/DProf.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Devel/DProf ../../lib/auto/Devel/DProf \
Devel-DProf-20110228.00 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bin/dprofpp
Not in MANIFEST: DProf.pm
Not in MANIFEST: DProf.xs
Not in MANIFEST: dprof/test1_t
Not in MANIFEST: dprof/test1_v
Not in MANIFEST: dprof/test2_t
Not in MANIFEST: dprof/test2_v
Not in MANIFEST: dprof/test3_t
Not in MANIFEST: dprof/test3_v
Not in MANIFEST: dprof/test4_t
Not in MANIFEST: dprof/test4_v
Not in MANIFEST: dprof/test5_t
Not in MANIFEST: dprof/test5_v
Not in MANIFEST: dprof/test6_t
Not in MANIFEST: dprof/test6_v
Not in MANIFEST: dprof/test7_t
Not in MANIFEST: dprof/test7_v
Not in MANIFEST: dprof/test8_t
Not in MANIFEST: dprof/test8_v
Not in MANIFEST: dprof/V.pm
Not in MANIFEST: t/DProf.t
Not in MANIFEST: Todo
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Devel-DProf'
Making Devel::PPPort (distclean)
Running Makefile.PL in cpan/Devel-PPPort
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Setting license tag...
Writing Makefile for Devel::PPPort
Writing MYMETA.yml
Making distclean in cpan/Devel-PPPort
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Devel-PPPort'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Devel/PPPort/extralibs.all \
core.[0-9][0-9] PPPort.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml PPPort.x \
PPPort.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Devel/PPPort/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
RealPPPort.c *perl.core \
core.*perl.*.? Makefile.aperl \
PPPort.def perl \
core.[0-9][0-9][0-9] mon.out \
libPPPort.def perlmain.c \
perl.exe so_locations \
PPPort.exp
rm -rf \
PPPort.pm RealPPPort.xs \
RealPPPort.c blib \
ppport.h
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
RealPPPort.o module2.o module3.o ../../lib/Devel/PPPort.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Devel/PPPort ../../lib/auto/Devel/PPPort \
Devel-PPPort-3.19
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: apicheck_c.PL
Not in MANIFEST: Changes
Not in MANIFEST: devel/buildperl.pl
Not in MANIFEST: devel/devtools.pl
Not in MANIFEST: devel/mkapidoc.sh
Not in MANIFEST: devel/mktodo
Not in MANIFEST: devel/mktodo.pl
Not in MANIFEST: devel/regenerate
Not in MANIFEST: devel/scanprov
Not in MANIFEST: HACKERS
Not in MANIFEST: Makefile.PL
Not in MANIFEST: MANIFEST.SKIP
Not in MANIFEST: mktests.PL
Not in MANIFEST: module2.c
Not in MANIFEST: module3.c
Not in MANIFEST: parts/apicheck.pl
Not in MANIFEST: parts/apidoc.fnc
Not in MANIFEST: parts/base/5004000
Not in MANIFEST: parts/base/5004010
Not in MANIFEST: parts/base/5004020
Not in MANIFEST: parts/base/5004030
Not in MANIFEST: parts/base/5004040
Not in MANIFEST: parts/base/5004050
Not in MANIFEST: parts/base/5005000
Not in MANIFEST: parts/base/5005010
Not in MANIFEST: parts/base/5005020
Not in MANIFEST: parts/base/5005030
Not in MANIFEST: parts/base/5005040
Not in MANIFEST: parts/base/5006000
Not in MANIFEST: parts/base/5006001
Not in MANIFEST: parts/base/5006002
Not in MANIFEST: parts/base/5007000
Not in MANIFEST: parts/base/5007001
Not in MANIFEST: parts/base/5007002
Not in MANIFEST: parts/base/5007003
Not in MANIFEST: parts/base/5008000
Not in MANIFEST: parts/base/5008001
Not in MANIFEST: parts/base/5008002
Not in MANIFEST: parts/base/5008003
Not in MANIFEST: parts/base/5008004
Not in MANIFEST: parts/base/5008005
Not in MANIFEST: parts/base/5008006
Not in MANIFEST: parts/base/5008007
Not in MANIFEST: parts/base/5008008
Not in MANIFEST: parts/base/5009000
Not in MANIFEST: parts/base/5009001
Not in MANIFEST: parts/base/5009002
Not in MANIFEST: parts/base/5009003
Not in MANIFEST: parts/base/5009004
Not in MANIFEST: parts/base/5009005
Not in MANIFEST: parts/base/5010000
Not in MANIFEST: parts/base/5011000
Not in MANIFEST: parts/embed.fnc
Not in MANIFEST: parts/inc/call
Not in MANIFEST: parts/inc/cop
Not in MANIFEST: parts/inc/exception
Not in MANIFEST: parts/inc/format
Not in MANIFEST: parts/inc/grok
Not in MANIFEST: parts/inc/gv
Not in MANIFEST: parts/inc/HvNAME
Not in MANIFEST: parts/inc/limits
Not in MANIFEST: parts/inc/magic
Not in MANIFEST: parts/inc/memory
Not in MANIFEST: parts/inc/misc
Not in MANIFEST: parts/inc/mPUSH
Not in MANIFEST: parts/inc/MY_CXT
Not in MANIFEST: parts/inc/newCONSTSUB
Not in MANIFEST: parts/inc/newRV
Not in MANIFEST: parts/inc/newSV_type
Not in MANIFEST: parts/inc/newSVpv
Not in MANIFEST: parts/inc/podtest
Not in MANIFEST: parts/inc/ppphbin
Not in MANIFEST: parts/inc/ppphdoc
Not in MANIFEST: parts/inc/ppphtest
Not in MANIFEST: parts/inc/pv_tools
Not in MANIFEST: parts/inc/pvs
Not in MANIFEST: parts/inc/shared_pv
Not in MANIFEST: parts/inc/snprintf
Not in MANIFEST: parts/inc/sprintf
Not in MANIFEST: parts/inc/strlfuncs
Not in MANIFEST: parts/inc/Sv_set
Not in MANIFEST: parts/inc/sv_xpvf
Not in MANIFEST: parts/inc/SvPV
Not in MANIFEST: parts/inc/SvREFCNT
Not in MANIFEST: parts/inc/threads
Not in MANIFEST: parts/inc/uv
Not in MANIFEST: parts/inc/variables
Not in MANIFEST: parts/inc/version
Not in MANIFEST: parts/inc/warn
Not in MANIFEST: parts/ppport.fnc
Not in MANIFEST: parts/ppptools.pl
Not in MANIFEST: parts/todo/5004000
Not in MANIFEST: parts/todo/5004010
Not in MANIFEST: parts/todo/5004020
Not in MANIFEST: parts/todo/5004030
Not in MANIFEST: parts/todo/5004040
Not in MANIFEST: parts/todo/5004050
Not in MANIFEST: parts/todo/5005000
Not in MANIFEST: parts/todo/5005010
Not in MANIFEST: parts/todo/5005020
Not in MANIFEST: parts/todo/5005030
Not in MANIFEST: parts/todo/5005040
Not in MANIFEST: parts/todo/5006000
Not in MANIFEST: parts/todo/5006001
Not in MANIFEST: parts/todo/5006002
Not in MANIFEST: parts/todo/5007000
Not in MANIFEST: parts/todo/5007001
Not in MANIFEST: parts/todo/5007002
Not in MANIFEST: parts/todo/5007003
Not in MANIFEST: parts/todo/5008000
Not in MANIFEST: parts/todo/5008001
Not in MANIFEST: parts/todo/5008002
Not in MANIFEST: parts/todo/5008003
Not in MANIFEST: parts/todo/5008004
Not in MANIFEST: parts/todo/5008005
Not in MANIFEST: parts/todo/5008006
Not in MANIFEST: parts/todo/5008007
Not in MANIFEST: parts/todo/5008008
Not in MANIFEST: parts/todo/5009000
Not in MANIFEST: parts/todo/5009001
Not in MANIFEST: parts/todo/5009002
Not in MANIFEST: parts/todo/5009003
Not in MANIFEST: parts/todo/5009004
Not in MANIFEST: parts/todo/5009005
Not in MANIFEST: parts/todo/5010000
Not in MANIFEST: parts/todo/5011000
Not in MANIFEST: PPPort.xs
Not in MANIFEST: ppport_h.PL
Not in MANIFEST: PPPort_pm.PL
Not in MANIFEST: PPPort_xs.PL
Not in MANIFEST: README
Not in MANIFEST: soak
Not in MANIFEST: t/call.t
Not in MANIFEST: t/cop.t
Not in MANIFEST: t/exception.t
Not in MANIFEST: t/format.t
Not in MANIFEST: t/grok.t
Not in MANIFEST: t/gv.t
Not in MANIFEST: t/HvNAME.t
Not in MANIFEST: t/limits.t
Not in MANIFEST: t/magic.t
Not in MANIFEST: t/memory.t
Not in MANIFEST: t/misc.t
Not in MANIFEST: t/mPUSH.t
Not in MANIFEST: t/MY_CXT.t
Not in MANIFEST: t/newCONSTSUB.t
Not in MANIFEST: t/newRV.t
Not in MANIFEST: t/newSV_type.t
Not in MANIFEST: t/newSVpv.t
Not in MANIFEST: t/podtest.t
Not in MANIFEST: t/ppphtest.t
Not in MANIFEST: t/pv_tools.t
Not in MANIFEST: t/pvs.t
Not in MANIFEST: t/shared_pv.t
Not in MANIFEST: t/snprintf.t
Not in MANIFEST: t/sprintf.t
Not in MANIFEST: t/strlfuncs.t
Not in MANIFEST: t/Sv_set.t
Not in MANIFEST: t/sv_xpvf.t
Not in MANIFEST: t/SvPV.t
Not in MANIFEST: t/SvREFCNT.t
Not in MANIFEST: t/testutil.pl
Not in MANIFEST: t/threads.t
Not in MANIFEST: t/uv.t
Not in MANIFEST: t/variables.t
Not in MANIFEST: t/warn.t
Not in MANIFEST: TODO
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Devel-PPPort'
Making Devel::Peek (distclean)
Running Makefile.PL in ext/Devel-Peek
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Devel::Peek
Writing MYMETA.yml
Making distclean in ext/Devel-Peek
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Devel-Peek'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Devel/Peek/extralibs.all \
core.[0-9][0-9] Peek.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Peek.x \
Peek.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Devel/Peek/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
Peek.c *perl.core \
core.*perl.*.? Makefile.aperl \
Peek.def perl \
core.[0-9][0-9][0-9] mon.out \
libPeek.def perlmain.c \
perl.exe so_locations \
Peek.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Devel/Peek.pm Peek.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Devel/Peek ../../lib/auto/Devel/Peek \
Devel-Peek-1.07
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Makefile.PL
Not in MANIFEST: Peek.pm
Not in MANIFEST: Peek.xs
Not in MANIFEST: t/Peek.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Devel-Peek'
Making Digest::MD5 (distclean)
Running Makefile.PL in cpan/Digest-MD5
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Perl's config says that U32 access must be aligned.
Writing Makefile for Digest::MD5
Writing MYMETA.yml
Making distclean in cpan/Digest-MD5
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Digest-MD5'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Digest/MD5/extralibs.all \
core.[0-9][0-9] MD5.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml MD5.x \
MD5.bs MD5.c \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Digest/MD5/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
MD5.def perl \
core.[0-9][0-9][0-9] mon.out \
libMD5.def perlmain.c \
perl.exe so_locations \
MD5.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Digest/MD5.pm MD5.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Digest/MD5 ../../lib/auto/Digest/MD5 \
Digest-MD5-2.51
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: hints/dec_osf.pl
Not in MANIFEST: hints/irix_6.pl
Not in MANIFEST: hints/MacOS.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: MD5.pm
Not in MANIFEST: MD5.xs
Not in MANIFEST: README
Not in MANIFEST: t/align.t
Not in MANIFEST: t/badfile.t
Not in MANIFEST: t/bits.t
Not in MANIFEST: t/clone.t
Not in MANIFEST: t/files.t
Not in MANIFEST: t/md5-aaa.t
Not in MANIFEST: t/threads.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Digest-MD5'
Making Digest::SHA (distclean)
Running Makefile.PL in cpan/Digest-SHA
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Digest::SHA
Writing MYMETA.yml
Making distclean in cpan/Digest-SHA
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Digest-SHA'
rm -f \
blib/script/shasum
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Digest/SHA/extralibs.all \
core.[0-9][0-9] SHA.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml SHA.x \
SHA.bs perl \
tmon.out *.o \
pm_to_blib SHA.c \
../../lib/auto/Digest/SHA/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
SHA.def perl \
core.[0-9][0-9][0-9] mon.out \
libSHA.def perlmain.c \
perl.exe so_locations \
SHA.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Digest/SHA.pm SHA.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Digest/SHA ../../lib/auto/Digest/SHA \
Digest-SHA-5.61
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Digest/SHA.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: README
Not in MANIFEST: SHA.xs
Not in MANIFEST: shasum
Not in MANIFEST: src/hmac.c
Not in MANIFEST: src/hmac.h
Not in MANIFEST: src/hmacxtra.c
Not in MANIFEST: src/sha.c
Not in MANIFEST: src/sha.h
Not in MANIFEST: src/sha64bit.c
Not in MANIFEST: src/sha64bit.h
Not in MANIFEST: src/shaxtra.c
Not in MANIFEST: t/allfcns.t
Not in MANIFEST: t/base64.t
Not in MANIFEST: t/bitbuf.t
Not in MANIFEST: t/dumpload.t
Not in MANIFEST: t/fips180-4.t
Not in MANIFEST: t/fips198.t
Not in MANIFEST: t/gg.t
Not in MANIFEST: t/gglong.t
Not in MANIFEST: t/hmacsha.t
Not in MANIFEST: t/ireland.t
Not in MANIFEST: t/methods.t
Not in MANIFEST: t/nistbit.t
Not in MANIFEST: t/nistbyte.t
Not in MANIFEST: t/rfc2202.t
Not in MANIFEST: t/sha1.t
Not in MANIFEST: t/sha224.t
Not in MANIFEST: t/sha256.t
Not in MANIFEST: t/sha384.t
Not in MANIFEST: t/sha512.t
Not in MANIFEST: t/woodbury.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Digest-SHA'
Making Encode (distclean)
Running Makefile.PL in cpan/Encode
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Encode::Byte
Writing MYMETA.yml
Writing Makefile for Encode::CN
Writing MYMETA.yml
Writing Makefile for Encode::EBCDIC
Writing MYMETA.yml
Writing Makefile for Encode::JP
Writing MYMETA.yml
Writing Makefile for Encode::KR
Writing MYMETA.yml
Writing Makefile for Encode::Symbol
Writing MYMETA.yml
Writing Makefile for Encode::TW
Writing MYMETA.yml
Writing Makefile for Encode::Unicode
Writing MYMETA.yml
Writing Makefile for Encode
Writing MYMETA.yml
Making distclean in cpan/Encode
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode'
rm -f \
blib/script/piconv blib/script/enc2xs
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Byte'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Byte'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Byte/extralibs.all \
core.[0-9][0-9] Byte.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Byte.x \
Byte.bs Byte.c \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/Byte/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Byte.def perl \
core.[0-9][0-9][0-9] mon.out \
libByte.def perlmain.c \
perl.exe so_locations \
Byte.exp
rm -rf \
Byte.xs byte_t.fnm \
byte_t.c byte_t.o \
byte_t.exh byte_t.h \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Byte'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''CN'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/CN'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/CN/extralibs.all \
core.[0-9][0-9] CN.bso \
CN.c pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
CN.x CN.bs \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/CN/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
CN.def perl \
core.[0-9][0-9][0-9] mon.out \
libCN.def perl.exe \
perlmain.c so_locations \
CN.exp
rm -rf \
ir_04_t.exh ir_04_t.fnm \
ir_04_t.h gb_03_t.c \
ma_05_t.o cp_00_t.h \
gb_02_t.h ma_05_t.c \
cp_00_t.fnm eu_01_t.o \
gb_02_t.o gb_02_t.fnm \
cp_00_t.exh gb_02_t.c \
eu_01_t.exh ir_04_t.o \
eu_01_t.c ma_05_t.h \
gb_03_t.h ma_05_t.fnm \
gb_02_t.exh CN.xs \
eu_01_t.h gb_03_t.fnm \
ir_04_t.c ma_05_t.exh \
gb_03_t.o eu_01_t.fnm \
gb_03_t.exh cp_00_t.o \
blib cp_00_t.c
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/CN'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''EBCDIC'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/EBCDIC'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/EBCDIC/extralibs.all \
core.[0-9][0-9] EBCDIC.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml EBCDIC.x \
EBCDIC.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/EBCDIC/extralibs.ld \
blibdirs.ts EBCDIC.c \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
EBCDIC.def perl \
core.[0-9][0-9][0-9] mon.out \
libEBCDIC.def perl.exe \
perlmain.c so_locations \
EBCDIC.exp
rm -rf \
ebcdic_t.fnm ebcdic_t.h \
ebcdic_t.exh ebcdic_t.c \
EBCDIC.xs ebcdic_t.o \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/EBCDIC'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''JP'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/JP'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/JP/extralibs.all \
core.[0-9][0-9] JP.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml JP.x \
JP.bs perl \
tmon.out *.o \
JP.c pm_to_blib \
../../../lib/auto/Encode/JP/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
JP.def perl \
core.[0-9][0-9][0-9] mon.out \
libJP.def perl.exe \
perlmain.c so_locations \
JP.exp
rm -rf \
ji_02_t.c ma_05_t.o \
sh_06_t.c ji_03_t.h \
ji_03_t.c ji_03_t.exh \
cp_00_t.h ji_04_t.h \
ma_05_t.c ji_04_t.o \
cp_00_t.fnm eu_01_t.o \
sh_06_t.fnm ji_03_t.fnm \
ji_02_t.h ji_04_t.fnm \
cp_00_t.exh JP.xs \
ji_02_t.o eu_01_t.exh \
eu_01_t.c ma_05_t.h \
ji_02_t.exh ma_05_t.fnm \
sh_06_t.o ji_03_t.o \
ji_04_t.c sh_06_t.h \
eu_01_t.h ma_05_t.exh \
sh_06_t.exh ji_02_t.fnm \
eu_01_t.fnm cp_00_t.o \
ji_04_t.exh blib \
cp_00_t.c
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/JP'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''KR'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/KR'
rm -f \
*.a KR.c \
core core.[0-9] \
../../../lib/auto/Encode/KR/extralibs.all core.[0-9][0-9] \
KR.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
KR.x KR.bs \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/KR/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
KR.def perl \
core.[0-9][0-9][0-9] mon.out \
libKR.def perl.exe \
perlmain.c so_locations \
KR.exp
rm -rf \
ks_03_t.c jo_02_t.c \
cp_00_t.h ma_04_t.o \
ks_03_t.o cp_00_t.fnm \
eu_01_t.o ma_04_t.h \
jo_02_t.o ma_04_t.c \
cp_00_t.exh jo_02_t.h \
eu_01_t.exh eu_01_t.c \
ma_04_t.fnm jo_02_t.fnm \
ma_04_t.exh ks_03_t.fnm \
KR.xs jo_02_t.exh \
eu_01_t.h ks_03_t.exh \
eu_01_t.fnm cp_00_t.o \
blib cp_00_t.c \
ks_03_t.h
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/KR'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Symbol'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Symbol'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Symbol/extralibs.all \
core.[0-9][0-9] Symbol.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Symbol.x \
Symbol.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/Symbol/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl Symbol.c \
Symbol.def perl \
core.[0-9][0-9][0-9] mon.out \
libSymbol.def perl.exe \
perlmain.c so_locations \
Symbol.exp
rm -rf \
symbol_t.o symbol_t.fnm \
symbol_t.h Symbol.xs \
symbol_t.c blib \
symbol_t.exh
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Symbol'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''TW'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/TW'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/TW/extralibs.all \
core.[0-9][0-9] TW.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml TW.x \
TW.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/TW/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
TW.c *perl.core \
core.*perl.*.? Makefile.aperl \
TW.def perl \
core.[0-9][0-9][0-9] mon.out \
libTW.def perl.exe \
perlmain.c so_locations \
TW.exp
rm -rf \
TW.xs ma_03_t.fnm \
bi_01_t.fnm cp_02_t.fnm \
cp_02_t.o bi_00_t.fnm \
bi_00_t.c cp_02_t.h \
ma_03_t.h bi_01_t.h \
ma_03_t.c bi_00_t.h \
bi_00_t.o cp_02_t.c \
bi_00_t.exh bi_01_t.o \
ma_03_t.o bi_01_t.c \
ma_03_t.exh bi_01_t.exh \
blib cp_02_t.exh
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/TW'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Unicode'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Unicode'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Unicode/extralibs.all \
core.[0-9][0-9] Unicode.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Unicode.x \
Unicode.bs Unicode.c \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/Unicode/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Unicode.def perl \
core.[0-9][0-9][0-9] mon.out \
libUnicode.def perl.exe \
perlmain.c so_locations \
Unicode.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Unicode'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Encode/extralibs.all \
core.[0-9][0-9] Encode.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Encode.x \
Encode.bs perl \
tmon.out Encode.c \
*.o pm_to_blib \
../../lib/auto/Encode/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Encode.def perl \
core.[0-9][0-9][0-9] mon.out \
libEncode.def perl.exe \
perlmain.c so_locations \
Encode.exp
rm -rf \
def_t.fnm def_t.c \
def_t.exh def_t.h \
def_t.o blib
mv Makefile Makefile.old > /dev/null 2>&1
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Byte'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Byte'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Byte/extralibs.all \
core.[0-9][0-9] Byte.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Byte.x \
Byte.bs Byte.c \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/Byte/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Byte.def perl \
core.[0-9][0-9][0-9] mon.out \
libByte.def perlmain.c \
perl.exe so_locations \
Byte.exp
rm -rf \
Byte.xs byte_t.fnm \
byte_t.c byte_t.o \
byte_t.exh byte_t.h \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
Byte.o byte_t.o ../../../lib/Encode/Byte.pm \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/Byte ../../../lib/auto/Encode/Byte \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Byte'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Byte'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''CN'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/CN'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/CN/extralibs.all \
core.[0-9][0-9] CN.bso \
CN.c pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
CN.x CN.bs \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/CN/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
CN.def perl \
core.[0-9][0-9][0-9] mon.out \
libCN.def perl.exe \
perlmain.c so_locations \
CN.exp
rm -rf \
ir_04_t.exh ir_04_t.fnm \
ir_04_t.h gb_03_t.c \
ma_05_t.o cp_00_t.h \
gb_02_t.h ma_05_t.c \
cp_00_t.fnm eu_01_t.o \
gb_02_t.o gb_02_t.fnm \
cp_00_t.exh gb_02_t.c \
eu_01_t.exh ir_04_t.o \
eu_01_t.c ma_05_t.h \
gb_03_t.h ma_05_t.fnm \
gb_02_t.exh CN.xs \
eu_01_t.h gb_03_t.fnm \
ir_04_t.c ma_05_t.exh \
gb_03_t.o eu_01_t.fnm \
gb_03_t.exh cp_00_t.o \
blib cp_00_t.c
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
../../../lib/Encode/CN.pm CN.o cp_00_t.o eu_01_t.o gb_02_t.o gb_03_t.o ir_04_t.o ma_05_t.o \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/CN ../../../lib/auto/Encode/CN \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/CN'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''CN'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''EBCDIC'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/EBCDIC'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/EBCDIC/extralibs.all \
core.[0-9][0-9] EBCDIC.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml EBCDIC.x \
EBCDIC.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/EBCDIC/extralibs.ld \
blibdirs.ts EBCDIC.c \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
EBCDIC.def perl \
core.[0-9][0-9][0-9] mon.out \
libEBCDIC.def perl.exe \
perlmain.c so_locations \
EBCDIC.exp
rm -rf \
ebcdic_t.fnm ebcdic_t.h \
ebcdic_t.exh ebcdic_t.c \
EBCDIC.xs ebcdic_t.o \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
EBCDIC.o ebcdic_t.o ../../../lib/Encode/EBCDIC.pm \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/EBCDIC ../../../lib/auto/Encode/EBCDIC \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/EBCDIC'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''EBCDIC'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''JP'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/JP'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/JP/extralibs.all \
core.[0-9][0-9] JP.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml JP.x \
JP.bs perl \
tmon.out *.o \
JP.c pm_to_blib \
../../../lib/auto/Encode/JP/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
JP.def perl \
core.[0-9][0-9][0-9] mon.out \
libJP.def perl.exe \
perlmain.c so_locations \
JP.exp
rm -rf \
ji_02_t.c ma_05_t.o \
sh_06_t.c ji_03_t.h \
ji_03_t.c ji_03_t.exh \
cp_00_t.h ji_04_t.h \
ma_05_t.c ji_04_t.o \
cp_00_t.fnm eu_01_t.o \
sh_06_t.fnm ji_03_t.fnm \
ji_02_t.h ji_04_t.fnm \
cp_00_t.exh JP.xs \
ji_02_t.o eu_01_t.exh \
eu_01_t.c ma_05_t.h \
ji_02_t.exh ma_05_t.fnm \
sh_06_t.o ji_03_t.o \
ji_04_t.c sh_06_t.h \
eu_01_t.h ma_05_t.exh \
sh_06_t.exh ji_02_t.fnm \
eu_01_t.fnm cp_00_t.o \
ji_04_t.exh blib \
cp_00_t.c
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
JP.o cp_00_t.o eu_01_t.o ji_02_t.o ji_03_t.o ji_04_t.o ma_05_t.o sh_06_t.o Makefile.old \
Makefile ../../../lib/Encode/JP.pm
rm -rf \
../../../lib/auto/Encode/JP ../../../lib/auto/Encode/JP \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/JP'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''JP'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''KR'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/KR'
rm -f \
*.a KR.c \
core core.[0-9] \
../../../lib/auto/Encode/KR/extralibs.all core.[0-9][0-9] \
KR.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
KR.x KR.bs \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/KR/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
KR.def perl \
core.[0-9][0-9][0-9] mon.out \
libKR.def perl.exe \
perlmain.c so_locations \
KR.exp
rm -rf \
ks_03_t.c jo_02_t.c \
cp_00_t.h ma_04_t.o \
ks_03_t.o cp_00_t.fnm \
eu_01_t.o ma_04_t.h \
jo_02_t.o ma_04_t.c \
cp_00_t.exh jo_02_t.h \
eu_01_t.exh eu_01_t.c \
ma_04_t.fnm jo_02_t.fnm \
ma_04_t.exh ks_03_t.fnm \
KR.xs jo_02_t.exh \
eu_01_t.h ks_03_t.exh \
eu_01_t.fnm cp_00_t.o \
blib cp_00_t.c \
ks_03_t.h
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
KR.o cp_00_t.o eu_01_t.o jo_02_t.o ks_03_t.o ma_04_t.o ../../../lib/Encode/KR.pm \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/KR ../../../lib/auto/Encode/KR \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/KR'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''KR'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Symbol'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Symbol'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Symbol/extralibs.all \
core.[0-9][0-9] Symbol.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Symbol.x \
Symbol.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/Symbol/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl Symbol.c \
Symbol.def perl \
core.[0-9][0-9][0-9] mon.out \
libSymbol.def perl.exe \
perlmain.c so_locations \
Symbol.exp
rm -rf \
symbol_t.o symbol_t.fnm \
symbol_t.h Symbol.xs \
symbol_t.c blib \
symbol_t.exh
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
Symbol.o symbol_t.o ../../../lib/Encode/Symbol.pm \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/Symbol ../../../lib/auto/Encode/Symbol \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Symbol'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Symbol'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''TW'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/TW'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/TW/extralibs.all \
core.[0-9][0-9] TW.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml TW.x \
TW.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/Encode/TW/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
TW.c *perl.core \
core.*perl.*.? Makefile.aperl \
TW.def perl \
core.[0-9][0-9][0-9] mon.out \
libTW.def perl.exe \
perlmain.c so_locations \
TW.exp
rm -rf \
TW.xs ma_03_t.fnm \
bi_01_t.fnm cp_02_t.fnm \
cp_02_t.o bi_00_t.fnm \
bi_00_t.c cp_02_t.h \
ma_03_t.h bi_01_t.h \
ma_03_t.c bi_00_t.h \
bi_00_t.o cp_02_t.c \
bi_00_t.exh bi_01_t.o \
ma_03_t.o bi_01_t.c \
ma_03_t.exh bi_01_t.exh \
blib cp_02_t.exh
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
TW.o bi_00_t.o bi_01_t.o cp_02_t.o ma_03_t.o Makefile.old \
Makefile ../../../lib/Encode/TW.pm
rm -rf \
../../../lib/auto/Encode/TW ../../../lib/auto/Encode/TW \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/TW'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''TW'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Unicode'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Unicode'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/Encode/Unicode/extralibs.all \
core.[0-9][0-9] Unicode.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Unicode.x \
Unicode.bs Unicode.c \
perl tmon.out \
*.o pm_to_blib \
../../../lib/auto/Encode/Unicode/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Unicode.def perl \
core.[0-9][0-9][0-9] mon.out \
libUnicode.def perl.exe \
perlmain.c so_locations \
Unicode.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
Unicode.o ../../../lib/Encode/Unicode.pm \
Makefile.old Makefile
rm -rf \
../../../lib/auto/Encode/Unicode ../../../lib/auto/Encode/Unicode \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode/Unicode'
/tmp/buildd/perl-5.14.2/cpan/Encode/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''Unicode'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
rm -f \
../../lib/Encode/encode.h ../../lib/Encode/Config.pm \
Encode.o def_t.o encengine.o ../../lib/Encode/_T.e2x \
../../lib/encoding.pm Makefile.old \
../../lib/Encode/KR/2022_KR.pm ../../lib/Encode/CN/HZ.pm \
../../lib/Encode/MIME/Header/ISO_2022_JP.pm ../../lib/Encode/MIME/Header.pm \
../../lib/Encode/Makefile_PL.e2x Makefile \
../../lib/Encode/PerlIO.pod ../../lib/Encode/Supported.pod \
../../lib/Encode/CJKConstants.pm ../../lib/Encode/Encoder.pm \
../../lib/Encode/Guess.pm ../../lib/Encode/JP/JIS7.pm \
../../lib/Encode/Alias.pm ../../lib/Encode/ConfigLocal_PM.e2x \
../../lib/Encode/GSM0338.pm ../../lib/Encode/JP/H2Z.pm \
../../lib/Encode.pm ../../lib/Encode/Changes.e2x \
../../lib/Encode/_PM.e2x ../../lib/Encode/Unicode/UTF7.pm \
../../lib/Encode/Encoding.pm ../../lib/Encode/MIME/Name.pm \
../../lib/Encode/README.e2x
rm -rf \
../../lib/auto/Encode ../../lib/auto/Encode \
Encode-2.42_01
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Encode'
Making Fcntl (distclean)
Running Makefile.PL in ext/Fcntl
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Fcntl
Writing MYMETA.yml
Making distclean in ext/Fcntl
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Fcntl'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Fcntl/extralibs.all \
core.[0-9][0-9] Fcntl.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Fcntl.x \
Fcntl.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Fcntl/extralibs.ld \
Fcntl.c blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Fcntl.def perl \
core.[0-9][0-9][0-9] mon.out \
libFcntl.def perlmain.c \
perl.exe so_locations \
Fcntl.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Fcntl.o ../../lib/Fcntl.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Fcntl const-c.inc \
../../lib/auto/Fcntl const-xs.inc \
Fcntl-1.11
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Fcntl.pm
Not in MANIFEST: Fcntl.xs
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/autoload.t
Not in MANIFEST: t/fcntl.t
Not in MANIFEST: t/mode.t
Not in MANIFEST: t/syslfs.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Fcntl'
Making File::Glob (distclean)
Running Makefile.PL in ext/File-Glob
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for File::Glob
Writing MYMETA.yml
Making distclean in ext/File-Glob
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/File-Glob'
rm -f \
*.a core \
Glob.c core.[0-9] \
../../lib/auto/File/Glob/extralibs.all core.[0-9][0-9] \
Glob.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
Glob.x Glob.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/File/Glob/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Glob.def perl \
core.[0-9][0-9][0-9] mon.out \
libGlob.def perlmain.c \
perl.exe so_locations \
Glob.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
bsd_glob.o Glob.o ../../lib/File/Glob.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/File/Glob const-c.inc \
../../lib/auto/File/Glob const-xs.inc \
File-Glob-1.13
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bsd_glob.c
Not in MANIFEST: bsd_glob.h
Not in MANIFEST: Changes
Not in MANIFEST: Glob.pm
Not in MANIFEST: Glob.xs
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/case.t
Not in MANIFEST: t/global.t
Not in MANIFEST: t/taint.t
Not in MANIFEST: TODO
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/File-Glob'
Making Filter::Util::Call (distclean)
Creating Makefile.PL in cpan/Filter-Util-Call for Filter::Util::Call
Running Makefile.PL in cpan/Filter-Util-Call
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Filter::Util::Call
Writing MYMETA.yml
Making distclean in cpan/Filter-Util-Call
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Filter-Util-Call'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Filter/Util/Call/extralibs.all \
core.[0-9][0-9] Call.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Call.x \
Call.bs perl \
tmon.out *.o \
pm_to_blib Call.c \
../../lib/auto/Filter/Util/Call/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Call.def perl \
core.[0-9][0-9][0-9] mon.out \
libCall.def perlmain.c \
perl.exe so_locations \
Call.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Filter/Util/Call.pm Call.o \
../../lib/Filter/Util/filter-util.pl Makefile.old \
Makefile
rm -rf \
../../lib/auto/Filter/Util/Call ../../lib/auto/Filter/Util/Call \
Filter-Util-Call-1.08 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Call.pm
Not in MANIFEST: Call.xs
Not in MANIFEST: filter-util.pl
Not in MANIFEST: t/call.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Filter-Util-Call'
Making GDBM_File (distclean)
Running Makefile.PL in ext/GDBM_File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for GDBM_File
Writing MYMETA.yml
Making distclean in ext/GDBM_File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/GDBM_File'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/GDBM_File/extralibs.all \
core.[0-9][0-9] GDBM_File.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml GDBM_File.x \
GDBM_File.bs perl \
GDBM_File.c tmon.out \
*.o pm_to_blib \
../../lib/auto/GDBM_File/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
GDBM_File.def perl \
core.[0-9][0-9][0-9] mon.out \
libGDBM_File.def perlmain.c \
perl.exe so_locations \
GDBM_File.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/GDBM_File.pm GDBM_File.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/GDBM_File const-c.inc \
../../lib/auto/GDBM_File const-xs.inc \
GDBM_File-1.14
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: GDBM_File.pm
Not in MANIFEST: GDBM_File.xs
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/gdbm.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/GDBM_File'
Making Hash::Util (distclean)
Running Makefile.PL in ext/Hash-Util
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Hash::Util
Writing MYMETA.yml
Making distclean in ext/Hash-Util
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Hash-Util'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Hash/Util/extralibs.all \
core.[0-9][0-9] Util.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Util.x \
Util.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Hash/Util/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
Util.c *perl.core \
core.*perl.*.? Makefile.aperl \
Util.def perl \
core.[0-9][0-9][0-9] mon.out \
libUtil.def perlmain.c \
perl.exe so_locations \
Util.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Util.o Makefile.old \
Makefile ../../lib/Hash/Util.pm
rm -rf \
../../lib/auto/Hash/Util ../../lib/auto/Hash/Util \
Hash-Util-0.11
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Hash/Util.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/Util.t
Not in MANIFEST: Util.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Hash-Util'
Making Hash::Util::FieldHash (distclean)
Creating Makefile.PL in ext/Hash-Util-FieldHash for Hash::Util::FieldHash
Running Makefile.PL in ext/Hash-Util-FieldHash
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Hash::Util::FieldHash
Writing MYMETA.yml
Making distclean in ext/Hash-Util-FieldHash
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Hash-Util-FieldHash'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Hash/Util/FieldHash/extralibs.all \
core.[0-9][0-9] FieldHash.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml FieldHash.x \
FieldHash.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Hash/Util/FieldHash/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl FieldHash.def \
perl core.[0-9][0-9][0-9] \
mon.out libFieldHash.def \
perlmain.c perl.exe \
so_locations FieldHash.c \
FieldHash.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
FieldHash.o ../../lib/Hash/Util/FieldHash.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Hash/Util/FieldHash ../../lib/auto/Hash/Util/FieldHash \
Hash-Util-FieldHash-1.09 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: FieldHash.xs
Not in MANIFEST: lib/Hash/Util/FieldHash.pm
Not in MANIFEST: t/01_load.t
Not in MANIFEST: t/02_function.t
Not in MANIFEST: t/03_class.t
Not in MANIFEST: t/04_thread.t
Not in MANIFEST: t/05_perlhook.t
Not in MANIFEST: t/10_hash.t
Not in MANIFEST: t/11_hashassign.t
Not in MANIFEST: t/12_hashwarn.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Hash-Util-FieldHash'
Making I18N::Langinfo (distclean)
Running Makefile.PL in ext/I18N-Langinfo
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for I18N::Langinfo
Writing MYMETA.yml
Making distclean in ext/I18N-Langinfo
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/I18N-Langinfo'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/I18N/Langinfo/extralibs.all \
core.[0-9][0-9] Langinfo.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Langinfo.x \
Langinfo.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/I18N/Langinfo/extralibs.ld \
blibdirs.ts Langinfo.c \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Langinfo.def perl \
core.[0-9][0-9][0-9] mon.out \
libLanginfo.def perlmain.c \
perl.exe so_locations \
Langinfo.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/I18N/Langinfo.pm Langinfo.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/I18N/Langinfo const-c.inc \
../../lib/auto/I18N/Langinfo const-xs.inc \
I18N-Langinfo-0.08
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Langinfo.pm
Not in MANIFEST: Langinfo.xs
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/Langinfo.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/I18N-Langinfo'
Making IO (distclean)
Running Makefile.PL in dist/IO
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for IO
Writing MYMETA.yml
Making distclean in dist/IO
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/IO'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IO/extralibs.all \
core.[0-9][0-9] IO.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml IO.x \
IO.bs perl \
tmon.out *.o \
pm_to_blib IO.c \
../../lib/auto/IO/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
IO.def perl \
core.[0-9][0-9][0-9] mon.out \
libIO.def perlmain.c \
perl.exe so_locations \
IO.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IO/Dir.pm IO.o poll.o \
../../lib/IO/Seekable.pm ../../lib/IO/Socket/UNIX.pm \
../../lib/IO/Pipe.pm ../../lib/IO/Handle.pm \
../../lib/IO/Socket.pm Makefile.old \
../../lib/IO/File.pm ../../lib/IO/Socket/INET.pm \
../../lib/IO.pm ../../lib/IO/Poll.pm \
Makefile ../../lib/IO/Select.pm
rm -rf \
../../lib/auto/IO ../../lib/auto/IO \
IO-1.25_04
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: IO.pm
Not in MANIFEST: IO.xs
Not in MANIFEST: lib/IO/Dir.pm
Not in MANIFEST: lib/IO/File.pm
Not in MANIFEST: lib/IO/Handle.pm
Not in MANIFEST: lib/IO/Pipe.pm
Not in MANIFEST: lib/IO/Poll.pm
Not in MANIFEST: lib/IO/Seekable.pm
Not in MANIFEST: lib/IO/Select.pm
Not in MANIFEST: lib/IO/Socket.pm
Not in MANIFEST: lib/IO/Socket/INET.pm
Not in MANIFEST: lib/IO/Socket/UNIX.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: poll.c
Not in MANIFEST: poll.h
Not in MANIFEST: README
Not in MANIFEST: t/IO.t
Not in MANIFEST: t/io_const.t
Not in MANIFEST: t/io_dir.t
Not in MANIFEST: t/io_dup.t
Not in MANIFEST: t/io_file.t
Not in MANIFEST: t/io_file_export.t
Not in MANIFEST: t/io_linenum.t
Not in MANIFEST: t/io_multihomed.t
Not in MANIFEST: t/io_pipe.t
Not in MANIFEST: t/io_poll.t
Not in MANIFEST: t/io_sel.t
Not in MANIFEST: t/io_sock.t
Not in MANIFEST: t/io_taint.t
Not in MANIFEST: t/io_tell.t
Not in MANIFEST: t/io_udp.t
Not in MANIFEST: t/io_unix.t
Not in MANIFEST: t/io_utf8.t
Not in MANIFEST: t/io_xs.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/IO'
Making IPC::SysV (distclean)
Running Makefile.PL in cpan/IPC-SysV
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Setting license tag...
Writing Makefile for IPC::SysV
Writing MYMETA.yml
Making distclean in cpan/IPC-SysV
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IPC-SysV'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IPC/SysV/extralibs.all \
core.[0-9][0-9] SysV.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml SysV.x \
SysV.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IPC/SysV/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl SysV.def \
perl core.[0-9][0-9][0-9] \
mon.out libSysV.def \
perlmain.c SysV.c \
perl.exe so_locations \
SysV.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IPC/SysV.pm ../../lib/IPC/Semaphore.pm \
SysV.o ../../lib/IPC/SharedMem.pm \
../../lib/IPC/Msg.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/IPC/SysV const-c.inc \
../../lib/auto/IPC/SysV const-xs.inc \
IPC-SysV-2.03
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: hints/cygwin.pl
Not in MANIFEST: hints/next_3.pl
Not in MANIFEST: lib/IPC/Msg.pm
Not in MANIFEST: lib/IPC/Semaphore.pm
Not in MANIFEST: lib/IPC/SharedMem.pm
Not in MANIFEST: lib/IPC/SysV.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: MANIFEST.SKIP
Not in MANIFEST: README
Not in MANIFEST: regen.pl
Not in MANIFEST: SysV.xs
Not in MANIFEST: t/ipcsysv.t
Not in MANIFEST: t/msg.t
Not in MANIFEST: t/pod.t
Not in MANIFEST: t/podcov.t
Not in MANIFEST: t/sem.t
Not in MANIFEST: t/shm.t
Not in MANIFEST: TODO
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IPC-SysV'
Making List::Util (distclean)
Running Makefile.PL in cpan/List-Util
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for List::Util
Writing MYMETA.yml
Making distclean in cpan/List-Util
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/List-Util'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/List/Util/extralibs.all \
ListUtil.c core.[0-9][0-9] \
Util.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
Util.x Util.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/List/Util/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Util.def perl \
core.[0-9][0-9][0-9] mon.out \
libUtil.def perlmain.c \
perl.exe so_locations \
Util.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/List/Util.pm ../../lib/List/Util/XS.pm \
ListUtil.o ../../lib/Scalar/Util.pm \
../../lib/List/Util/PP.pm ../../lib/Scalar/Util/PP.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/List/Util ../../lib/auto/List/Util \
Scalar-List-Utils-1.23
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/List/Util.pm
Not in MANIFEST: lib/List/Util/PP.pm
Not in MANIFEST: lib/List/Util/XS.pm
Not in MANIFEST: lib/Scalar/Util.pm
Not in MANIFEST: lib/Scalar/Util/PP.pm
Not in MANIFEST: ListUtil.xs
Not in MANIFEST: Makefile.PL
Not in MANIFEST: multicall.h
Not in MANIFEST: README
Not in MANIFEST: t/00version.t
Not in MANIFEST: t/blessed.t
Not in MANIFEST: t/dualvar.t
Not in MANIFEST: t/expfail.t
Not in MANIFEST: t/first.t
Not in MANIFEST: t/isvstring.t
Not in MANIFEST: t/lln.t
Not in MANIFEST: t/max.t
Not in MANIFEST: t/maxstr.t
Not in MANIFEST: t/min.t
Not in MANIFEST: t/minstr.t
Not in MANIFEST: t/openhan.t
Not in MANIFEST: t/p_00version.t
Not in MANIFEST: t/p_blessed.t
Not in MANIFEST: t/p_first.t
Not in MANIFEST: t/p_lln.t
Not in MANIFEST: t/p_max.t
Not in MANIFEST: t/p_maxstr.t
Not in MANIFEST: t/p_min.t
Not in MANIFEST: t/p_minstr.t
Not in MANIFEST: t/p_openhan.t
Not in MANIFEST: t/p_readonly.t
Not in MANIFEST: t/p_reduce.t
Not in MANIFEST: t/p_refaddr.t
Not in MANIFEST: t/p_reftype.t
Not in MANIFEST: t/p_shuffle.t
Not in MANIFEST: t/p_sum.t
Not in MANIFEST: t/p_tainted.t
Not in MANIFEST: t/proto.t
Not in MANIFEST: t/readonly.t
Not in MANIFEST: t/reduce.t
Not in MANIFEST: t/refaddr.t
Not in MANIFEST: t/reftype.t
Not in MANIFEST: t/shuffle.t
Not in MANIFEST: t/stack-corruption.t
Not in MANIFEST: t/sum.t
Not in MANIFEST: t/tainted.t
Not in MANIFEST: t/weak.t
Not in MANIFEST: XS.pp
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/List-Util'
Making MIME::Base64 (distclean)
Running Makefile.PL in cpan/MIME-Base64
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for MIME::Base64
Writing MYMETA.yml
Making distclean in cpan/MIME-Base64
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/MIME-Base64'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/MIME/Base64/extralibs.all \
core.[0-9][0-9] Base64.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Base64.x \
Base64.bs perl \
tmon.out *.o \
pm_to_blib Base64.c \
../../lib/auto/MIME/Base64/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Base64.def perl \
core.[0-9][0-9][0-9] mon.out \
libBase64.def perlmain.c \
perl.exe so_locations \
Base64.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/MIME/QuotedPrint.pm Base64.o \
../../lib/MIME/Base64.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/MIME/Base64 ../../lib/auto/MIME/Base64 \
MIME-Base64-3.13
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Base64.pm
Not in MANIFEST: Base64.xs
Not in MANIFEST: Changes
Not in MANIFEST: Makefile.PL
Not in MANIFEST: QuotedPrint.pm
Not in MANIFEST: README
Not in MANIFEST: t/base64.t
Not in MANIFEST: t/length.t
Not in MANIFEST: t/quoted-print.t
Not in MANIFEST: t/unicode.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/MIME-Base64'
Making Math::BigInt::FastCalc (distclean)
Creating Makefile.PL in dist/Math-BigInt-FastCalc for Math::BigInt::FastCalc
Running Makefile.PL in dist/Math-BigInt-FastCalc
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Math::BigInt::FastCalc
Writing MYMETA.yml
Making distclean in dist/Math-BigInt-FastCalc
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt-FastCalc'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Math/BigInt/FastCalc/extralibs.all \
core.[0-9][0-9] FastCalc.bso \
pm_to_blib.ts FastCalc.c \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
FastCalc.x FastCalc.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Math/BigInt/FastCalc/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
FastCalc.def perl \
core.[0-9][0-9][0-9] mon.out \
libFastCalc.def perlmain.c \
perl.exe so_locations \
FastCalc.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Math/BigInt/FastCalc.pm FastCalc.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/Math/BigInt/FastCalc ../../lib/auto/Math/BigInt/FastCalc \
Math-BigInt-FastCalc-0.28 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: FastCalc.xs
Not in MANIFEST: lib/Math/BigInt/FastCalc.pm
Not in MANIFEST: t/bigintfc.t
Not in MANIFEST: t/bootstrap.t
Not in MANIFEST: t/leak.t
Not in MANIFEST: t/mbi_rand.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt-FastCalc'
Making NDBM_File (distclean)
Running Makefile.PL in ext/NDBM_File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Writing Makefile for NDBM_File
Writing MYMETA.yml
Making distclean in ext/NDBM_File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/NDBM_File'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/NDBM_File/extralibs.all \
NDBM_File.c core.[0-9][0-9] \
NDBM_File.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
NDBM_File.x NDBM_File.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/NDBM_File/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
NDBM_File.def perl \
core.[0-9][0-9][0-9] mon.out \
libNDBM_File.def perlmain.c \
perl.exe so_locations \
NDBM_File.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/NDBM_File.pm NDBM_File.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/NDBM_File ../../lib/auto/NDBM_File \
NDBM_File-1.12
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/cygwin.pl
Not in MANIFEST: hints/dec_osf.pl
Not in MANIFEST: hints/dynixptx.pl
Not in MANIFEST: hints/gnu.pl
Not in MANIFEST: hints/gnukfreebsd.pl
Not in MANIFEST: hints/gnuknetbsd.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: hints/solaris.pl
Not in MANIFEST: hints/svr4.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: NDBM_File.pm
Not in MANIFEST: NDBM_File.xs
Not in MANIFEST: t/ndbm.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/NDBM_File'
Making ODBM_File (distclean)
Running Makefile.PL in ext/ODBM_File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Writing Makefile for ODBM_File
Writing MYMETA.yml
Making distclean in ext/ODBM_File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/ODBM_File'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ODBM_File/extralibs.all \
core.[0-9][0-9] ODBM_File.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml ODBM_File.x \
ODBM_File.bs perl \
tmon.out *.o \
ODBM_File.c pm_to_blib \
../../lib/auto/ODBM_File/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
ODBM_File.def perl \
core.[0-9][0-9][0-9] mon.out \
libODBM_File.def perlmain.c \
perl.exe so_locations \
ODBM_File.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ODBM_File.pm ODBM_File.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/ODBM_File ../../lib/auto/ODBM_File \
ODBM_File-1.10
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/cygwin.pl
Not in MANIFEST: hints/dec_osf.pl
Not in MANIFEST: hints/gnu.pl
Not in MANIFEST: hints/gnukfreebsd.pl
Not in MANIFEST: hints/gnuknetbsd.pl
Not in MANIFEST: hints/hpux.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: hints/solaris.pl
Not in MANIFEST: hints/svr4.pl
Not in MANIFEST: hints/ultrix.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: ODBM_File.pm
Not in MANIFEST: ODBM_File.xs
Not in MANIFEST: t/odbm.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/ODBM_File'
Making Opcode (distclean)
Creating Makefile.PL in ext/Opcode for Opcode
Running Makefile.PL in ext/Opcode
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Opcode
Writing MYMETA.yml
Making distclean in ext/Opcode
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Opcode'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Opcode/extralibs.all \
Opcode.c core.[0-9][0-9] \
Opcode.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
Opcode.x Opcode.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Opcode/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Opcode.def perl \
core.[0-9][0-9][0-9] mon.out \
libOpcode.def perlmain.c \
perl.exe so_locations \
Opcode.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Opcode.pm ../../lib/ops.pm \
Opcode.o Makefile.old \
Makefile
rm -rf \
../../lib/auto/Opcode ../../lib/auto/Opcode \
Opcode-1.18 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Opcode.pm
Not in MANIFEST: Opcode.xs
Not in MANIFEST: ops.pm
Not in MANIFEST: t/Opcode.t
Not in MANIFEST: t/ops.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Opcode'
Making POSIX (distclean)
Running Makefile.PL in ext/POSIX
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Note (probably harmless): No library found for -lposix
Note (probably harmless): No library found for -lcposix
Writing Makefile for POSIX
Writing MYMETA.yml
Making distclean in ext/POSIX
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/POSIX'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/POSIX/extralibs.all \
core.[0-9][0-9] POSIX.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml POSIX.x \
POSIX.bs perl \
tmon.out *.o \
pm_to_blib POSIX.c \
../../lib/auto/POSIX/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
POSIX.def perl \
core.[0-9][0-9][0-9] mon.out \
libPOSIX.def perlmain.c \
perl.exe so_locations \
POSIX.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/POSIX.pod POSIX.o \
Makefile.old Makefile \
../../lib/POSIX.pm
rm -rf \
../../lib/auto/POSIX const-c.inc \
../../lib/auto/POSIX const-xs.inc \
POSIX-1.24
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/bsdos.pl
Not in MANIFEST: hints/dynixptx.pl
Not in MANIFEST: hints/freebsd.pl
Not in MANIFEST: hints/gnukfreebsd.pl
Not in MANIFEST: hints/gnuknetbsd.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: hints/mint.pl
Not in MANIFEST: hints/netbsd.pl
Not in MANIFEST: hints/next_3.pl
Not in MANIFEST: hints/openbsd.pl
Not in MANIFEST: hints/sunos_4.pl
Not in MANIFEST: hints/svr4.pl
Not in MANIFEST: hints/uts.pl
Not in MANIFEST: lib/POSIX.pm
Not in MANIFEST: lib/POSIX.pod
Not in MANIFEST: Makefile.PL
Not in MANIFEST: POSIX.xs
Not in MANIFEST: t/is.t
Not in MANIFEST: t/math.t
Not in MANIFEST: t/posix.t
Not in MANIFEST: t/sigaction.t
Not in MANIFEST: t/sysconf.t
Not in MANIFEST: t/taint.t
Not in MANIFEST: t/termios.t
Not in MANIFEST: t/time.t
Not in MANIFEST: t/waitpid.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/POSIX'
Making PerlIO::encoding (distclean)
Creating Makefile.PL in ext/PerlIO-encoding for PerlIO::encoding
Running Makefile.PL in ext/PerlIO-encoding
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for PerlIO::encoding
Writing MYMETA.yml
Making distclean in ext/PerlIO-encoding
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-encoding'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/PerlIO/encoding/extralibs.all \
core.[0-9][0-9] encoding.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml encoding.x \
encoding.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/PerlIO/encoding/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
encoding.c Makefile.aperl \
encoding.def perl \
core.[0-9][0-9][0-9] mon.out \
libencoding.def perlmain.c \
perl.exe so_locations \
encoding.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
encoding.o ../../lib/PerlIO/encoding.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/PerlIO/encoding ../../lib/auto/PerlIO/encoding \
PerlIO-encoding-0.14 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
No such file: Makefile.PL
Not in MANIFEST: t/encoding.t
Not in MANIFEST: t/fallback.t
Not in MANIFEST: t/nolooping.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-encoding'
Making PerlIO::scalar (distclean)
Creating Makefile.PL in ext/PerlIO-scalar for PerlIO::scalar
Running Makefile.PL in ext/PerlIO-scalar
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for PerlIO::scalar
Writing MYMETA.yml
Making distclean in ext/PerlIO-scalar
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-scalar'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/PerlIO/scalar/extralibs.all \
core.[0-9][0-9] scalar.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml scalar.x \
scalar.bs perl \
scalar.c tmon.out \
*.o pm_to_blib \
../../lib/auto/PerlIO/scalar/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
scalar.def perl \
core.[0-9][0-9][0-9] mon.out \
libscalar.def perlmain.c \
perl.exe so_locations \
scalar.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
scalar.o ../../lib/PerlIO/scalar.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/PerlIO/scalar ../../lib/auto/PerlIO/scalar \
PerlIO-scalar-0.11_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: scalar.pm
Not in MANIFEST: scalar.xs
Not in MANIFEST: t/scalar.t
Not in MANIFEST: t/scalar_ungetc.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-scalar'
Making PerlIO::via (distclean)
Creating Makefile.PL in ext/PerlIO-via for PerlIO::via
Running Makefile.PL in ext/PerlIO-via
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for PerlIO::via
Writing MYMETA.yml
Making distclean in ext/PerlIO-via
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-via'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/PerlIO/via/extralibs.all \
core.[0-9][0-9] via.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml via.x \
via.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/PerlIO/via/extralibs.ld \
via.c blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
via.def perl \
core.[0-9][0-9][0-9] mon.out \
libvia.def perlmain.c \
perl.exe so_locations \
via.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/PerlIO/via.pm via.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/PerlIO/via ../../lib/auto/PerlIO/via \
PerlIO-via-0.11 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/aix.pl
Not in MANIFEST: t/via.t
Not in MANIFEST: via.pm
Not in MANIFEST: via.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/PerlIO-via'
Making SDBM_File (distclean)
Running Makefile.PL in ext/SDBM_File
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for sdbm
Writing MYMETA.yml
Writing Makefile for SDBM_File
Writing MYMETA.yml
Making distclean in ext/SDBM_File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File'
/tmp/buildd/perl-5.14.2/ext/SDBM_File/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''sdbm'\''; system '\''make clean'\'' if -f '\''Makefile'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File/sdbm'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/sdbm/extralibs.all \
core.[0-9][0-9] sdbm.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml sdbm.x \
sdbm.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/sdbm/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
sdbm.def core.[0-9][0-9][0-9] \
mon.out libsdbm.def \
perlmain.c perl.exe \
so_locations sdbm.exp
rm -rf \
dbe dbu \
*.dir dba \
*.pag libsdbm.a \
blib dbd \
x-dbu
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File/sdbm'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/SDBM_File/extralibs.all \
core.[0-9][0-9] SDBM_File.bso \
pm_to_blib.ts SDBM_File.c \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
SDBM_File.x SDBM_File.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/SDBM_File/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
SDBM_File.def perl \
core.[0-9][0-9][0-9] mon.out \
libSDBM_File.def perl.exe \
perlmain.c so_locations \
SDBM_File.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
/tmp/buildd/perl-5.14.2/ext/SDBM_File/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''sdbm'\''; system '\''make -f Makefile.old realclean'\'' if -f '\''Makefile.old'\'';' --
make[4]: Entering directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File/sdbm'
rm -f \
*.a core \
core.[0-9] ../../../lib/auto/sdbm/extralibs.all \
core.[0-9][0-9] sdbm.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml sdbm.x \
sdbm.bs perl \
tmon.out *.o \
pm_to_blib ../../../lib/auto/sdbm/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
sdbm.def core.[0-9][0-9][0-9] \
mon.out libsdbm.def \
perlmain.c perl.exe \
so_locations sdbm.exp
rm -rf \
dbe dbu \
*.dir dba \
*.pag libsdbm.a \
blib dbd \
x-dbu
mv Makefile Makefile.old > /dev/null 2>&1
make[4]: [clean] Error 1 (ignored)
rm -f \
sdbm.o pair.o hash.o Makefile.old \
Makefile
rm -rf \
../../../lib/auto/sdbm ../../../lib/auto/sdbm \
make[4]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File/sdbm'
/tmp/buildd/perl-5.14.2/ext/SDBM_File/../../miniperl "-I../../lib" "-I../../lib" -e 'chdir '\''sdbm'\''; system '\''make -f Makefile realclean'\'' if -f '\''Makefile'\'';' --
rm -f \
../../lib/SDBM_File.pm SDBM_File.o \
Makefile.old Makefile
rm -rf \
../../lib/auto/SDBM_File ../../lib/auto/SDBM_File \
SDBM_File-1.09
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Makefile.PL
Not in MANIFEST: sdbm/biblio
Not in MANIFEST: sdbm/CHANGES
Not in MANIFEST: sdbm/COMPARE
Not in MANIFEST: sdbm/dba.c
Not in MANIFEST: sdbm/dbd.c
Not in MANIFEST: sdbm/dbe.1
Not in MANIFEST: sdbm/dbe.c
Not in MANIFEST: sdbm/dbu.c
Not in MANIFEST: sdbm/grind
Not in MANIFEST: sdbm/hash.c
Not in MANIFEST: sdbm/linux.patches
Not in MANIFEST: sdbm/Makefile.PL
Not in MANIFEST: sdbm/makefile.sdbm
Not in MANIFEST: sdbm/pair.c
Not in MANIFEST: sdbm/pair.h
Not in MANIFEST: sdbm/README
Not in MANIFEST: sdbm/readme.ms
Not in MANIFEST: sdbm/README.too
Not in MANIFEST: sdbm/sdbm.3
Not in MANIFEST: sdbm/sdbm.c
Not in MANIFEST: sdbm/sdbm.h
Not in MANIFEST: sdbm/tune.h
Not in MANIFEST: sdbm/util.c
Not in MANIFEST: SDBM_File.pm
Not in MANIFEST: SDBM_File.xs
Not in MANIFEST: t/sdbm.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/SDBM_File'
Making Socket (distclean)
Running Makefile.PL in ext/Socket
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Socket
Writing MYMETA.yml
Making distclean in ext/Socket
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Socket'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Socket/extralibs.all \
core.[0-9][0-9] Socket.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Socket.x \
Socket.bs perl \
tmon.out *.o \
pm_to_blib Socket.c \
../../lib/auto/Socket/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Socket.def perl \
core.[0-9][0-9][0-9] mon.out \
libSocket.def perlmain.c \
perl.exe so_locations \
Socket.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Socket.o ../../lib/Socket.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Socket const-c.inc \
../../lib/auto/Socket const-xs.inc \
Socket-1.94
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Makefile.PL
Not in MANIFEST: Socket.pm
Not in MANIFEST: Socket.xs
Not in MANIFEST: t/getaddrinfo.t
Not in MANIFEST: t/getnameinfo.t
Not in MANIFEST: t/Socket.t
Not in MANIFEST: t/socketpair.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Socket'
Making Storable (distclean)
Running Makefile.PL in dist/Storable
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Writing Makefile for Storable
Writing MYMETA.yml
You appear to have a perl configured to use 64 bit integers in its scalar
variables. If you have existing data written with an earlier version of
Storable which this version of Storable refuses to load with a
Byte order is not compatible
error, then please read the section "64 bit data in perl 5.6.0 and 5.6.1"
in the Storable documentation for instructions on how to read your data.
(You can find the documentation at the end of Storable.pm in POD format)
Making distclean in dist/Storable
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Storable'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Storable/extralibs.all \
core.[0-9][0-9] Storable.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Storable.x \
Storable.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Storable/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
Storable.c *perl.core \
core.*perl.*.? Makefile.aperl \
Storable.def perl \
core.[0-9][0-9][0-9] mon.out \
libStorable.def perlmain.c \
perl.exe so_locations \
Storable.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Storable.o ../../lib/Storable.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Storable ../../lib/auto/Storable \
Storable-2.27
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: hints/gnukfreebsd.pl
Not in MANIFEST: hints/gnuknetbsd.pl
Not in MANIFEST: hints/hpux.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: README
Not in MANIFEST: Storable.pm
Not in MANIFEST: Storable.xs
Not in MANIFEST: t/attach_errors.t
Not in MANIFEST: t/attach_singleton.t
Not in MANIFEST: t/blessed.t
Not in MANIFEST: t/canonical.t
Not in MANIFEST: t/circular_hook.t
Not in MANIFEST: t/code.t
Not in MANIFEST: t/compat01.t
Not in MANIFEST: t/compat06.t
Not in MANIFEST: t/croak.t
Not in MANIFEST: t/dclone.t
Not in MANIFEST: t/downgrade.t
Not in MANIFEST: t/file_magic.t
Not in MANIFEST: t/forgive.t
Not in MANIFEST: t/freeze.t
Not in MANIFEST: t/HAS_ATTACH.pm
Not in MANIFEST: t/HAS_HOOK.pm
Not in MANIFEST: t/HAS_OVERLOAD.pm
Not in MANIFEST: t/integer.t
Not in MANIFEST: t/interwork56.t
Not in MANIFEST: t/just_plain_nasty.t
Not in MANIFEST: t/lock.t
Not in MANIFEST: t/make_56_interwork.pl
Not in MANIFEST: t/make_downgrade.pl
Not in MANIFEST: t/make_overload.pl
Not in MANIFEST: t/malice.t
Not in MANIFEST: t/overload.t
Not in MANIFEST: t/recurse.t
Not in MANIFEST: t/restrict.t
Not in MANIFEST: t/retrieve.t
Not in MANIFEST: t/sig_die.t
Not in MANIFEST: t/st-dump.pl
Not in MANIFEST: t/store.t
Not in MANIFEST: t/testlib.pl
Not in MANIFEST: t/threads.t
Not in MANIFEST: t/tied.t
Not in MANIFEST: t/tied_hook.t
Not in MANIFEST: t/tied_items.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: t/utf8hash.t
Not in MANIFEST: t/weak.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Storable'
Making Sys::Hostname (distclean)
Creating Makefile.PL in ext/Sys-Hostname for Sys::Hostname
Running Makefile.PL in ext/Sys-Hostname
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Sys::Hostname
Writing MYMETA.yml
Making distclean in ext/Sys-Hostname
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Sys-Hostname'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Sys/Hostname/extralibs.all \
core.[0-9][0-9] Hostname.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Hostname.x \
Hostname.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Sys/Hostname/extralibs.ld \
blibdirs.ts Hostname.c \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Hostname.def perl \
core.[0-9][0-9][0-9] mon.out \
libHostname.def perlmain.c \
perl.exe so_locations \
Hostname.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Hostname.o ../../lib/Sys/Hostname.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Sys/Hostname ../../lib/auto/Sys/Hostname \
Sys-Hostname-1.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Hostname.pm
Not in MANIFEST: Hostname.xs
Not in MANIFEST: t/Hostname.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Sys-Hostname'
Making Sys::Syslog (distclean)
Running Makefile.PL in cpan/Sys-Syslog
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Sys::Syslog
Writing MYMETA.yml
Making distclean in cpan/Sys-Syslog
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Sys-Syslog'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Sys/Syslog/extralibs.all \
core.[0-9][0-9] Syslog.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Syslog.x \
Syslog.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Sys/Syslog/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl Syslog.def \
perl core.[0-9][0-9][0-9] \
mon.out libSyslog.def \
perlmain.c perl.exe \
Syslog.c so_locations \
Syslog.exp
rm -rf \
Sys-Syslog-* blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Syslog.o ../../lib/Sys/Syslog.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Sys/Syslog *.bin \
*.rc const-c.inc \
*.bak macros.all \
const-xs.inc win32/PerlLog_dll \
PerlLog.h typemap \
../../lib/auto/Sys/Syslog lib \
Sys-Syslog-0.27
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: fallback/const-c.inc
Not in MANIFEST: fallback/const-xs.inc
Not in MANIFEST: fallback/syslog.h
Not in MANIFEST: Makefile.PL
Not in MANIFEST: README
Not in MANIFEST: README.win32
Not in MANIFEST: Syslog.pm
Not in MANIFEST: Syslog.xs
Not in MANIFEST: t/00-load.t
Not in MANIFEST: t/constants.t
Not in MANIFEST: t/syslog.t
Not in MANIFEST: win32/compile.pl
Not in MANIFEST: win32/PerlLog.mc
Not in MANIFEST: win32/PerlLog_dll.uu
Not in MANIFEST: win32/PerlLog_RES.uu
Not in MANIFEST: win32/Win32.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Sys-Syslog'
Making Text::Soundex (distclean)
Creating Makefile.PL in cpan/Text-Soundex for Text::Soundex
Running Makefile.PL in cpan/Text-Soundex
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Text::Soundex
Writing MYMETA.yml
Making distclean in cpan/Text-Soundex
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Soundex'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Text/Soundex/extralibs.all \
core.[0-9][0-9] Soundex.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Soundex.x \
Soundex.bs perl \
Soundex.c tmon.out \
*.o pm_to_blib \
../../lib/auto/Text/Soundex/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Soundex.def perl \
core.[0-9][0-9][0-9] mon.out \
libSoundex.def perlmain.c \
perl.exe so_locations \
Soundex.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Soundex.o ../../lib/Text/Soundex.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Text/Soundex ../../lib/auto/Text/Soundex \
Text-Soundex-3.03_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: README
Not in MANIFEST: Soundex.pm
Not in MANIFEST: Soundex.xs
Not in MANIFEST: t/Soundex.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Soundex'
Making Tie::Hash::NamedCapture (distclean)
Creating Makefile.PL in ext/Tie-Hash-NamedCapture for Tie::Hash::NamedCapture
Running Makefile.PL in ext/Tie-Hash-NamedCapture
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Tie::Hash::NamedCapture
Writing MYMETA.yml
Making distclean in ext/Tie-Hash-NamedCapture
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Tie-Hash-NamedCapture'
rm -f \
*.a NamedCapture.c \
core core.[0-9] \
../../lib/auto/Tie/Hash/NamedCapture/extralibs.all core.[0-9][0-9] \
NamedCapture.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
NamedCapture.x NamedCapture.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Tie/Hash/NamedCapture/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
NamedCapture.def perl \
core.[0-9][0-9][0-9] mon.out \
libNamedCapture.def perlmain.c \
perl.exe so_locations \
NamedCapture.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
NamedCapture.o Makefile.old \
Makefile ../../lib/Tie/Hash/NamedCapture.pm
rm -rf \
../../lib/auto/Tie/Hash/NamedCapture ../../lib/auto/Tie/Hash/NamedCapture \
Tie-Hash-NamedCapture-0.08 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: NamedCapture.pm
Not in MANIFEST: NamedCapture.xs
Not in MANIFEST: t/tiehash.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Tie-Hash-NamedCapture'
Making Time::HiRes (distclean)
Running Makefile.PL in cpan/Time-HiRes
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Configuring Time::HiRes...
Using hints hints/linux.pl...
Extra libraries: -lrt...
Have syscall()... looking for syscall.h... found <syscall.h>.
Looking for gettimeofday()... found.
Looking for setitimer()... found.
Looking for getitimer()... found.
You have interval timers (both setitimer and getitimer).
Looking for ualarm()... NOT found.
But you have setitimer().
We can make a Time::HiRes::ualarm().
Looking for usleep()... found.
Looking for nanosleep()... testing... found.
You can mix subsecond sleeps with signals, if you want to.
(It's still not portable, though.)
Looking for clock_gettime()... found.
Looking for clock_getres()... found.
Looking for clock_nanosleep()... found.
Looking for clock()... found.
Looking for stat() subsecond timestamps...
Trying struct stat st_atimespec.tv_nsec...NOT found.
Trying struct stat st_atimensec...NOT found.
Trying struct stat st_atime_n...NOT found.
Trying struct stat st_atim.tv_nsec...found.
Trying struct stat st_uatime...Processing hints file hints/linux.pl
NOT found.
You seem to have stat() subsecond timestamps.
(Your struct stat has them, but the filesystems must help.)
Writing Makefile for Time::HiRes
Writing MYMETA.yml
Making distclean in cpan/Time-HiRes
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Time-HiRes'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Time/HiRes/extralibs.all \
core.[0-9][0-9] HiRes.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml HiRes.x \
HiRes.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Time/HiRes/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl HiRes.def \
perl core.[0-9][0-9][0-9] \
mon.out libHiRes.def \
perlmain.c perl.exe \
so_locations HiRes.exp \
HiRes.c
rm -rf \
xdefine blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
HiRes.o ../../lib/Time/HiRes.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Time/HiRes const-c.inc \
../../lib/auto/Time/HiRes const-xs.inc \
Time-HiRes-1.9721_01
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: fallback/const-c.inc
Not in MANIFEST: fallback/const-xs.inc
Not in MANIFEST: hints/aix.pl
Not in MANIFEST: hints/dec_osf.pl
Not in MANIFEST: hints/dynixptx.pl
Not in MANIFEST: hints/irix.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: hints/sco.pl
Not in MANIFEST: hints/solaris.pl
Not in MANIFEST: hints/svr4.pl
Not in MANIFEST: HiRes.pm
Not in MANIFEST: HiRes.xs
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/HiRes.t
Not in MANIFEST: typemap
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Time-HiRes'
Making Time::Piece (distclean)
Running Makefile.PL in cpan/Time-Piece
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for Time::Piece
Writing MYMETA.yml
Making distclean in cpan/Time-Piece
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Time-Piece'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Time/Piece/extralibs.all \
core.[0-9][0-9] Piece.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Piece.x \
Piece.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Time/Piece/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
Piece.c *perl.core \
core.*perl.*.? Makefile.aperl \
Piece.def perl \
core.[0-9][0-9][0-9] mon.out \
libPiece.def perlmain.c \
perl.exe so_locations \
Piece.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Time/Seconds.pm Piece.o \
../../lib/Time/Piece.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Time/Piece ../../lib/auto/Time/Piece \
Time-Piece-1.20_01
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Makefile.PL
Not in MANIFEST: Piece.pm
Not in MANIFEST: Piece.xs
Not in MANIFEST: README
Not in MANIFEST: Seconds.pm
Not in MANIFEST: t/01base.t
Not in MANIFEST: t/02core.t
Not in MANIFEST: t/03compare.t
Not in MANIFEST: t/04mjd.t
Not in MANIFEST: t/05overload.t
Not in MANIFEST: t/06subclass.t
Not in MANIFEST: t/07arith.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Time-Piece'
Making Unicode::Collate (distclean)
Running Makefile.PL in cpan/Unicode-Collate
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Making header files for XS...
Writing Makefile for Unicode::Collate
Writing MYMETA.yml
Making distclean in cpan/Unicode-Collate
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Unicode-Collate'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Unicode/Collate/extralibs.all \
core.[0-9][0-9] Collate.bso \
Collate.c pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
Collate.x Collate.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/Unicode/Collate/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Collate.def perl \
core.[0-9][0-9][0-9] mon.out \
libCollate.def perlmain.c \
perl.exe so_locations \
Collate.exp
rm -rf \
ucatbl.h blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Unicode/Collate/Locale/yo.pl ../../lib/Unicode/Collate/Locale/ca.pl \
../../lib/Unicode/Collate/Locale/zh_big5.pl ../../lib/Unicode/Collate/Locale/fo.pl \
../../lib/Unicode/Collate/Locale/lt.pl ../../lib/Unicode/Collate/allkeys.txt \
../../lib/Unicode/Collate/Locale/az.pl ../../lib/Unicode/Collate/Locale/fi.pl \
../../lib/Unicode/Collate/Locale/se.pl ../../lib/Unicode/Collate/Locale/zh_pin.pl \
../../lib/Unicode/Collate/Locale/sv.pl ../../lib/Unicode/Collate/Locale/tr.pl \
../../lib/Unicode/Collate/Locale/uk.pl ../../lib/Unicode/Collate/Locale/eo.pl \
../../lib/Unicode/Collate/CJK/JISX0208.pm ../../lib/Unicode/Collate/Locale/is.pl \
../../lib/Unicode/Collate/Locale/om.pl ../../lib/Unicode/Collate/Locale/ja.pl \
../../lib/Unicode/Collate/Locale/ig.pl ../../lib/Unicode/Collate/Locale/sw.pl \
../../lib/Unicode/Collate/Locale/vi.pl ../../lib/Unicode/Collate/Locale/es.pl \
../../lib/Unicode/Collate/Locale/sl.pl ../../lib/Unicode/Collate/CJK/GB2312.pm \
../../lib/Unicode/Collate/Locale/zh.pl Makefile.old \
../../lib/Unicode/Collate/Locale/es_trad.pl ../../lib/Unicode/Collate/keys.txt \
../../lib/Unicode/Collate/Locale/hr.pl ../../lib/Unicode/Collate/Locale/hy.pl \
../../lib/Unicode/Collate/CJK/Korean.pm ../../lib/Unicode/Collate/Locale/to.pl \
../../lib/Unicode/Collate/CJK/Pinyin.pm ../../lib/Unicode/Collate/Locale/sq.pl \
../../lib/Unicode/Collate/Locale/cy.pl ../../lib/Unicode/Collate.pm \
../../lib/Unicode/Collate/Locale/af.pl ../../lib/Unicode/Collate/Locale/sk.pl \
Collate.o ../../lib/Unicode/Collate/Locale/kl.pl \
../../lib/Unicode/Collate/Locale/ar.pl ../../lib/Unicode/Collate/Locale/hu.pl \
../../lib/Unicode/Collate/CJK/Stroke.pm Makefile \
../../lib/Unicode/Collate/Locale/da.pl ../../lib/Unicode/Collate/Locale/haw.pl \
../../lib/Unicode/Collate/Locale/nn.pl ../../lib/Unicode/Collate/Locale/ro.pl \
../../lib/Unicode/Collate/Locale/lv.pl ../../lib/Unicode/Collate/Locale/nso.pl \
../../lib/Unicode/Collate/Locale.pm ../../lib/Unicode/Collate/Locale/pl.pl \
../../lib/Unicode/Collate/Locale/kk.pl ../../lib/Unicode/Collate/Locale/cs.pl \
../../lib/Unicode/Collate/CJK/Big5.pm ../../lib/Unicode/Collate/Locale/ru.pl \
../../lib/Unicode/Collate/Locale/fil.pl ../../lib/Unicode/Collate/Locale/zh_gb.pl \
../../lib/Unicode/Collate/Locale/fr.pl ../../lib/Unicode/Collate/Locale/ko.pl \
../../lib/Unicode/Collate/Locale/de_phone.pl ../../lib/Unicode/Collate/Locale/ha.pl \
../../lib/Unicode/Collate/Locale/et.pl ../../lib/Unicode/Collate/Locale/mt.pl \
../../lib/Unicode/Collate/Locale/nb.pl ../../lib/Unicode/Collate/Locale/zh_strk.pl
rm -f \
../../lib/Unicode/Collate/Locale/wo.pl ../../lib/Unicode/Collate/Locale/tn.pl
rm -rf \
../../lib/auto/Unicode/Collate ../../lib/auto/Unicode/Collate \
Unicode-Collate-0.73
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Collate.pm
Not in MANIFEST: Collate.xs
Not in MANIFEST: Collate/allkeys.txt
Not in MANIFEST: Collate/CJK/Big5.pm
Not in MANIFEST: Collate/CJK/GB2312.pm
Not in MANIFEST: Collate/CJK/JISX0208.pm
Not in MANIFEST: Collate/CJK/Korean.pm
Not in MANIFEST: Collate/CJK/Pinyin.pm
Not in MANIFEST: Collate/CJK/Stroke.pm
Not in MANIFEST: Collate/keys.txt
Not in MANIFEST: Collate/Locale.pm
Not in MANIFEST: Collate/Locale/af.pl
Not in MANIFEST: Collate/Locale/ar.pl
Not in MANIFEST: Collate/Locale/az.pl
Not in MANIFEST: Collate/Locale/ca.pl
Not in MANIFEST: Collate/Locale/cs.pl
Not in MANIFEST: Collate/Locale/cy.pl
Not in MANIFEST: Collate/Locale/da.pl
Not in MANIFEST: Collate/Locale/de_phone.pl
Not in MANIFEST: Collate/Locale/eo.pl
Not in MANIFEST: Collate/Locale/es.pl
Not in MANIFEST: Collate/Locale/es_trad.pl
Not in MANIFEST: Collate/Locale/et.pl
Not in MANIFEST: Collate/Locale/fi.pl
Not in MANIFEST: Collate/Locale/fil.pl
Not in MANIFEST: Collate/Locale/fo.pl
Not in MANIFEST: Collate/Locale/fr.pl
Not in MANIFEST: Collate/Locale/ha.pl
Not in MANIFEST: Collate/Locale/haw.pl
Not in MANIFEST: Collate/Locale/hr.pl
Not in MANIFEST: Collate/Locale/hu.pl
Not in MANIFEST: Collate/Locale/hy.pl
Not in MANIFEST: Collate/Locale/ig.pl
Not in MANIFEST: Collate/Locale/is.pl
Not in MANIFEST: Collate/Locale/ja.pl
Not in MANIFEST: Collate/Locale/kk.pl
Not in MANIFEST: Collate/Locale/kl.pl
Not in MANIFEST: Collate/Locale/ko.pl
Not in MANIFEST: Collate/Locale/lt.pl
Not in MANIFEST: Collate/Locale/lv.pl
Not in MANIFEST: Collate/Locale/mt.pl
Not in MANIFEST: Collate/Locale/nb.pl
Not in MANIFEST: Collate/Locale/nn.pl
Not in MANIFEST: Collate/Locale/nso.pl
Not in MANIFEST: Collate/Locale/om.pl
Not in MANIFEST: Collate/Locale/pl.pl
Not in MANIFEST: Collate/Locale/ro.pl
Not in MANIFEST: Collate/Locale/ru.pl
Not in MANIFEST: Collate/Locale/se.pl
Not in MANIFEST: Collate/Locale/sk.pl
Not in MANIFEST: Collate/Locale/sl.pl
Not in MANIFEST: Collate/Locale/sq.pl
Not in MANIFEST: Collate/Locale/sv.pl
Not in MANIFEST: Collate/Locale/sw.pl
Not in MANIFEST: Collate/Locale/tn.pl
Not in MANIFEST: Collate/Locale/to.pl
Not in MANIFEST: Collate/Locale/tr.pl
Not in MANIFEST: Collate/Locale/uk.pl
Not in MANIFEST: Collate/Locale/vi.pl
Not in MANIFEST: Collate/Locale/wo.pl
Not in MANIFEST: Collate/Locale/yo.pl
Not in MANIFEST: Collate/Locale/zh.pl
Not in MANIFEST: Collate/Locale/zh_big5.pl
Not in MANIFEST: Collate/Locale/zh_gb.pl
Not in MANIFEST: Collate/Locale/zh_pin.pl
Not in MANIFEST: Collate/Locale/zh_strk.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: mkheader
Not in MANIFEST: README
Not in MANIFEST: t/altern.t
Not in MANIFEST: t/backwds.t
Not in MANIFEST: t/cjk_b5.t
Not in MANIFEST: t/cjk_gb.t
Not in MANIFEST: t/cjk_ja.t
Not in MANIFEST: t/cjk_ko.t
Not in MANIFEST: t/cjk_py.t
Not in MANIFEST: t/cjk_st.t
Not in MANIFEST: t/cjkrange.t
Not in MANIFEST: t/compatui.t
Not in MANIFEST: t/contract.t
Not in MANIFEST: t/default.t
Not in MANIFEST: t/hangtype.t
Not in MANIFEST: t/hangul.t
Not in MANIFEST: t/ignor.t
Not in MANIFEST: t/illegal.t
Not in MANIFEST: t/illegalp.t
Not in MANIFEST: t/index.t
Not in MANIFEST: t/loc_af.t
Not in MANIFEST: t/loc_ar.t
Not in MANIFEST: t/loc_az.t
Not in MANIFEST: t/loc_be.t
Not in MANIFEST: t/loc_bg.t
Not in MANIFEST: t/loc_ca.t
Not in MANIFEST: t/loc_cs.t
Not in MANIFEST: t/loc_cy.t
Not in MANIFEST: t/loc_cyrl.t
Not in MANIFEST: t/loc_da.t
Not in MANIFEST: t/loc_de.t
Not in MANIFEST: t/loc_deph.t
Not in MANIFEST: t/loc_eo.t
Not in MANIFEST: t/loc_es.t
Not in MANIFEST: t/loc_estr.t
Not in MANIFEST: t/loc_et.t
Not in MANIFEST: t/loc_fi.t
Not in MANIFEST: t/loc_fil.t
Not in MANIFEST: t/loc_fo.t
Not in MANIFEST: t/loc_fr.t
Not in MANIFEST: t/loc_ha.t
Not in MANIFEST: t/loc_haw.t
Not in MANIFEST: t/loc_hr.t
Not in MANIFEST: t/loc_hu.t
Not in MANIFEST: t/loc_hy.t
Not in MANIFEST: t/loc_ig.t
Not in MANIFEST: t/loc_is.t
Not in MANIFEST: t/loc_ja.t
Not in MANIFEST: t/loc_jait.t
Not in MANIFEST: t/loc_japr.t
Not in MANIFEST: t/loc_kk.t
Not in MANIFEST: t/loc_kl.t
Not in MANIFEST: t/loc_ko.t
Not in MANIFEST: t/loc_lt.t
Not in MANIFEST: t/loc_lv.t
Not in MANIFEST: t/loc_mk.t
Not in MANIFEST: t/loc_mt.t
Not in MANIFEST: t/loc_nb.t
Not in MANIFEST: t/loc_nn.t
Not in MANIFEST: t/loc_nso.t
Not in MANIFEST: t/loc_om.t
Not in MANIFEST: t/loc_pl.t
Not in MANIFEST: t/loc_ro.t
Not in MANIFEST: t/loc_ru.t
Not in MANIFEST: t/loc_se.t
Not in MANIFEST: t/loc_sk.t
Not in MANIFEST: t/loc_sl.t
Not in MANIFEST: t/loc_sq.t
Not in MANIFEST: t/loc_sr.t
Not in MANIFEST: t/loc_sv.t
Not in MANIFEST: t/loc_sw.t
Not in MANIFEST: t/loc_test.t
Not in MANIFEST: t/loc_tn.t
Not in MANIFEST: t/loc_to.t
Not in MANIFEST: t/loc_tr.t
Not in MANIFEST: t/loc_uk.t
Not in MANIFEST: t/loc_vi.t
Not in MANIFEST: t/loc_wo.t
Not in MANIFEST: t/loc_yo.t
Not in MANIFEST: t/loc_zh.t
Not in MANIFEST: t/loc_zhb5.t
Not in MANIFEST: t/loc_zhgb.t
Not in MANIFEST: t/loc_zhpy.t
Not in MANIFEST: t/loc_zhst.t
Not in MANIFEST: t/nonchar.t
Not in MANIFEST: t/normal.t
Not in MANIFEST: t/overcjk0.t
Not in MANIFEST: t/overcjk1.t
Not in MANIFEST: t/override.t
Not in MANIFEST: t/rearrang.t
Not in MANIFEST: t/test.t
Not in MANIFEST: t/trailwt.t
Not in MANIFEST: t/variable.t
Not in MANIFEST: t/version.t
Not in MANIFEST: t/view.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Unicode-Collate'
Making Unicode::Normalize (distclean)
Running Makefile.PL in cpan/Unicode-Normalize
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Making header files for XS...
Unicode::Normalize, mkheader: CombiningClass.pl not found at mkheader line 58
require mkheader called at Makefile.PL line 9
512 from cpan/Unicode-Normalize's Makefile.PL at make_ext.pl line 404.
Warning: No Makefile!
Making distclean in cpan/Unicode-Normalize
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Unicode-Normalize'
make[3]: *** No rule to make target `distclean'. Stop.
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Unicode-Normalize'
Unsuccessful make(cpan/Unicode-Normalize): code=512 at make_ext.pl line 463.
Making XS::APItest (distclean)
Running Makefile.PL in ext/XS-APItest
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for XS::APItest
Writing MYMETA.yml
Making distclean in ext/XS-APItest
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/XS-APItest'
rm -f \
core.[0-9] APItest.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml XSUB-undef-XS_VERSION.c \
perl tmon.out \
*.o pm_to_blib \
blibdirs.ts *perl.core \
core.*perl.*.? APItest.def \
core.[0-9][0-9][0-9] mon.out \
libAPItest.def perlmain.c \
perl.exe so_locations \
APItest.exp *.a \
core ../../lib/auto/XS/APItest/extralibs.all \
core.[0-9][0-9] numeric.c \
APItest.bs APItest.x \
../../lib/auto/XS/APItest/extralibs.ld APItest.c \
core.[0-9][0-9][0-9][0-9][0-9] Makefile.aperl \
perl XSUB-redefined-macros.c
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
APItest.o XSUB-undef-XS_VERSION.o XSUB-redefined-macros.o exception.o core.o notcore.o Makefile.old \
Makefile ../../lib/XS/APItest.pm
rm -rf \
../../lib/auto/XS/APItest const-c.inc \
../../lib/auto/XS/APItest const-xs.inc \
XS-APItest-0.28
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Not in MANIFEST: core.c
Not in MANIFEST: core_or_not.inc
Not in MANIFEST: notcore.c
Not in MANIFEST: numeric.xs
Not in MANIFEST: t/arrayexpr.t
Not in MANIFEST: t/BHK.pm
Not in MANIFEST: t/Block.pm
Not in MANIFEST: t/blockasexpr.t
Not in MANIFEST: t/blockhooks-csc.t
Not in MANIFEST: t/blockhooks.t
Not in MANIFEST: t/call_checker.t
Not in MANIFEST: t/caller.t
Not in MANIFEST: t/cleanup.t
Not in MANIFEST: t/cophh.t
Not in MANIFEST: t/copyhints.t
Not in MANIFEST: t/customop.t
Not in MANIFEST: t/eval-filter.t
Not in MANIFEST: t/exception.t
Not in MANIFEST: t/grok.t
Not in MANIFEST: t/keyword_multiline.t
Not in MANIFEST: t/keyword_plugin.t
Not in MANIFEST: t/labelconst.aux
Not in MANIFEST: t/labelconst.t
Not in MANIFEST: t/loopblock.t
Not in MANIFEST: t/looprest.t
Not in MANIFEST: t/magic.t
Not in MANIFEST: t/magic_chain.t
Not in MANIFEST: t/Markers.pm
Not in MANIFEST: t/multicall.t
Not in MANIFEST: t/my_cxt.t
Not in MANIFEST: t/my_exit.t
Not in MANIFEST: t/Null.pm
Not in MANIFEST: t/op.t
Not in MANIFEST: t/op_contextualize.t
Not in MANIFEST: t/op_list.t
Not in MANIFEST: t/overload.t
Not in MANIFEST: t/peep.t
Not in MANIFEST: t/pmflag.t
Not in MANIFEST: t/postinc.t
Not in MANIFEST: t/ptr_table.t
Not in MANIFEST: t/refs.t
Not in MANIFEST: t/rmagical.t
Not in MANIFEST: t/rv2cv_op_cv.t
Not in MANIFEST: t/savehints.t
Not in MANIFEST: t/scopelessblock.t
Not in MANIFEST: t/stmtasexpr.t
Not in MANIFEST: t/stmtsasexpr.t
Not in MANIFEST: t/stuff_modify_bug.t
Not in MANIFEST: t/stuff_svcur_bug.t
Not in MANIFEST: t/svpeek.t
Not in MANIFEST: t/svpv_magic.t
Not in MANIFEST: t/svsetsv.t
Not in MANIFEST: t/swaplabel.t
Not in MANIFEST: t/swaptwostmts.t
Not in MANIFEST: t/temp_lv_sub.t
Not in MANIFEST: t/utf16_to_utf8.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: t/xs_special_subs.t
Not in MANIFEST: t/xs_special_subs_require.t
Not in MANIFEST: t/xsub_h.t
Not in MANIFEST: typemap
Not in MANIFEST: XSUB-redefined-macros.xs
Not in MANIFEST: XSUB-undef-XS_VERSION.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/XS-APItest'
Making XS::Typemap (distclean)
Running Makefile.PL in ext/XS-Typemap
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for XS::Typemap
Writing MYMETA.yml
Making distclean in ext/XS-Typemap
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/XS-Typemap'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/XS/Typemap/extralibs.all \
core.[0-9][0-9] Typemap.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Typemap.x \
Typemap.bs perl \
tmon.out Typemap.c \
*.o pm_to_blib \
../../lib/auto/XS/Typemap/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
Typemap.def perl \
core.[0-9][0-9][0-9] mon.out \
libTypemap.def perlmain.c \
perl.exe so_locations \
Typemap.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
stdio.o Typemap.o ../../lib/XS/Typemap.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/XS/Typemap ../../lib/auto/XS/Typemap \
XS-Typemap-0.05
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Makefile.PL
Not in MANIFEST: README
Not in MANIFEST: stdio.c
Not in MANIFEST: t/Typemap.t
Not in MANIFEST: typemap
Not in MANIFEST: Typemap.pm
Not in MANIFEST: Typemap.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/XS-Typemap'
Making attributes (distclean)
Creating Makefile.PL in ext/attributes for attributes
Running Makefile.PL in ext/attributes
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for attributes
Writing MYMETA.yml
Making distclean in ext/attributes
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/attributes'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/attributes/extralibs.all \
core.[0-9][0-9] attributes.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml attributes.x \
attributes.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/attributes/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl attributes.def \
perl core.[0-9][0-9][0-9] \
mon.out attributes.c \
libattributes.def perlmain.c \
perl.exe so_locations \
attributes.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
attributes.o Makefile.old \
Makefile ../../lib/attributes.pm
rm -rf \
../../lib/auto/attributes ../../lib/auto/attributes \
attributes-0.14 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: attributes.pm
Not in MANIFEST: attributes.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/attributes'
Making mro (distclean)
Creating Makefile.PL in ext/mro for mro
Running Makefile.PL in ext/mro
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for mro
Writing MYMETA.yml
Making distclean in ext/mro
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/mro'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/mro/extralibs.all \
core.[0-9][0-9] mro.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml mro.x \
mro.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/mro/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
mro.c *perl.core \
core.*perl.*.? Makefile.aperl \
mro.def perl \
core.[0-9][0-9][0-9] mon.out \
libmro.def perlmain.c \
perl.exe so_locations \
mro.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
mro.o ../../lib/mro.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/mro ../../lib/auto/mro \
mro-1.07 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: mro.pm
Not in MANIFEST: mro.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/mro'
Making re (distclean)
Running Makefile.PL in ext/re
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Writing Makefile for re
Writing MYMETA.yml
Making distclean in ext/re
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/re'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/re/extralibs.all \
core.[0-9][0-9] re.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml re.x \
re.bs perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/re/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl re.def \
perl core.[0-9][0-9][0-9] \
mon.out libre.def \
perlmain.c perl.exe \
so_locations re.exp \
re.c
rm -rf \
../../lib/re.pm *.o \
*.c blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
re_exec.o re_comp.o re.o ../../lib/re.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/re ../../lib/auto/re \
re-0.18
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/mpeix.pl
Not in MANIFEST: Makefile.PL
Not in MANIFEST: re.pm
Not in MANIFEST: re.xs
Not in MANIFEST: re_comp.h
Not in MANIFEST: re_top.h
Not in MANIFEST: t/lexical_debug.pl
Not in MANIFEST: t/lexical_debug.t
Not in MANIFEST: t/qr.t
Not in MANIFEST: t/re.t
Not in MANIFEST: t/re_funcs.t
Not in MANIFEST: t/re_funcs_u.t
Not in MANIFEST: t/reflags.t
Not in MANIFEST: t/regop.pl
Not in MANIFEST: t/regop.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/re'
Making threads (distclean)
Creating Makefile.PL in dist/threads for threads
Running Makefile.PL in dist/threads
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Writing Makefile for threads
Writing MYMETA.yml
Making distclean in dist/threads
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/threads'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/threads/extralibs.all \
core.[0-9][0-9] threads.bso \
pm_to_blib.ts threads.c \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
threads.x threads.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/threads/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
threads.def perl \
core.[0-9][0-9][0-9] mon.out \
libthreads.def perlmain.c \
perl.exe so_locations \
threads.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
threads.o ../../lib/threads.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/threads ../../lib/auto/threads \
threads-1.83 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/hpux.pl
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: lib/threads.pm
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/blocks.t
Not in MANIFEST: t/context.t
Not in MANIFEST: t/end.t
Not in MANIFEST: t/err.t
Not in MANIFEST: t/exit.t
Not in MANIFEST: t/free.t
Not in MANIFEST: t/free2.t
Not in MANIFEST: t/join.t
Not in MANIFEST: t/kill.t
Not in MANIFEST: t/kill2.t
Not in MANIFEST: t/libc.t
Not in MANIFEST: t/list.t
Not in MANIFEST: t/no_threads.t
Not in MANIFEST: t/problems.t
Not in MANIFEST: t/stack.t
Not in MANIFEST: t/stack_env.t
Not in MANIFEST: t/state.t
Not in MANIFEST: t/stress_cv.t
Not in MANIFEST: t/stress_re.t
Not in MANIFEST: t/stress_string.t
Not in MANIFEST: t/thread.t
Not in MANIFEST: threads.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/threads'
Making threads::shared (distclean)
Creating Makefile.PL in dist/threads-shared for threads::shared
Running Makefile.PL in dist/threads-shared
.../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1
Processing hints file hints/linux.pl
Writing Makefile for threads::shared
Writing MYMETA.yml
Making distclean in dist/threads-shared
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/threads-shared'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/threads/shared/extralibs.all \
core.[0-9][0-9] shared.bso \
pm_to_blib.ts shared.c \
core.[0-9][0-9][0-9][0-9] MYMETA.yml \
shared.x shared.bs \
perl tmon.out \
*.o pm_to_blib \
../../lib/auto/threads/shared/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
shared.def perl \
core.[0-9][0-9][0-9] mon.out \
libshared.def perlmain.c \
perl.exe so_locations \
shared.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
shared.o ../../lib/threads/shared.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/threads/shared ../../lib/auto/threads/shared \
threads-shared-1.37 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: hints/linux.pl
Not in MANIFEST: lib/threads/shared.pm
Not in MANIFEST: shared.xs
Not in MANIFEST: t/0nothread.t
Not in MANIFEST: t/av_refs.t
Not in MANIFEST: t/av_simple.t
Not in MANIFEST: t/blessed.t
Not in MANIFEST: t/clone.t
Not in MANIFEST: t/cond.t
Not in MANIFEST: t/disabled.t
Not in MANIFEST: t/hv_refs.t
Not in MANIFEST: t/hv_simple.t
Not in MANIFEST: t/no_share.t
Not in MANIFEST: t/object.t
Not in MANIFEST: t/shared_attr.t
Not in MANIFEST: t/stress.t
Not in MANIFEST: t/sv_refs.t
Not in MANIFEST: t/sv_simple.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: t/wait.t
Not in MANIFEST: t/waithires.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/threads-shared'
Making Archive::Extract (distclean)
Making distclean in cpan/Archive-Extract
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Archive/Extract/extralibs.all \
core.[0-9][0-9] Extract.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Extract.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Archive/Extract/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Extract.def core.[0-9][0-9][0-9] \
mon.out libExtract.def \
perlmain.c perl.exe \
so_locations Extract.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Archive/Extract.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Archive/Extract ../../lib/auto/Archive/Extract \
Archive-Extract-0.48 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Archive/Extract.pm
Not in MANIFEST: t/01_Archive-Extract.t
Not in MANIFEST: t/src/double_dir.zip
Not in MANIFEST: t/src/x.bz2
Not in MANIFEST: t/src/x.gz
Not in MANIFEST: t/src/x.jar
Not in MANIFEST: t/src/x.lzma
Not in MANIFEST: t/src/x.par
Not in MANIFEST: t/src/x.tar
Not in MANIFEST: t/src/x.tar.gz
Not in MANIFEST: t/src/x.tar.xz
Not in MANIFEST: t/src/x.tgz
Not in MANIFEST: t/src/x.txz
Not in MANIFEST: t/src/x.xz
Not in MANIFEST: t/src/x.Z
Not in MANIFEST: t/src/x.zip
Not in MANIFEST: t/src/y.jar
Not in MANIFEST: t/src/y.par
Not in MANIFEST: t/src/y.tar
Not in MANIFEST: t/src/y.tar.bz2
Not in MANIFEST: t/src/y.tar.gz
Not in MANIFEST: t/src/y.tar.xz
Not in MANIFEST: t/src/y.tbz
Not in MANIFEST: t/src/y.tgz
Not in MANIFEST: t/src/y.txz
Not in MANIFEST: t/src/y.zip
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Extract'
Making Archive::Tar (distclean)
Making distclean in cpan/Archive-Tar
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Archive/Tar/extralibs.all \
core.[0-9][0-9] Tar.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Tar.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Archive/Tar/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Tar.def core.[0-9][0-9][0-9] \
mon.out libTar.def \
perlmain.c perl.exe \
so_locations Tar.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Archive/Tar.pm ../../lib/Archive/Tar/File.pm \
../../lib/Archive/Tar/Constant.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Archive/Tar ../../lib/auto/Archive/Tar \
Archive-Tar-1.76 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bin/ptar
Not in MANIFEST: bin/ptardiff
Not in MANIFEST: bin/ptargrep
Not in MANIFEST: lib/Archive/Tar.pm
Not in MANIFEST: lib/Archive/Tar/Constant.pm
Not in MANIFEST: lib/Archive/Tar/File.pm
Not in MANIFEST: t/01_use.t
Not in MANIFEST: t/02_methods.t
Not in MANIFEST: t/03_file.t
Not in MANIFEST: t/04_resolved_issues.t
Not in MANIFEST: t/05_iter.t
Not in MANIFEST: t/06_error.t
Not in MANIFEST: t/90_symlink.t
Not in MANIFEST: t/99_pod.t
Not in MANIFEST: t/src/header/signed.tar
Not in MANIFEST: t/src/linktest/linktest_missing_dir.tar
Not in MANIFEST: t/src/linktest/linktest_with_dir.tar
Not in MANIFEST: t/src/long/b
Not in MANIFEST: t/src/long/bar.tar
Not in MANIFEST: t/src/long/foo.tbz
Not in MANIFEST: t/src/long/foo.tgz
Not in MANIFEST: t/src/short/b
Not in MANIFEST: t/src/short/bar.tar
Not in MANIFEST: t/src/short/foo.tbz
Not in MANIFEST: t/src/short/foo.tgz
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Archive-Tar'
Making Attribute::Handlers (distclean)
Making distclean in dist/Attribute-Handlers
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Attribute/Handlers/extralibs.all \
core.[0-9][0-9] Handlers.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Handlers.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Attribute/Handlers/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Handlers.def core.[0-9][0-9][0-9] \
mon.out libHandlers.def \
perlmain.c perl.exe \
so_locations Handlers.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Attribute/Handlers.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Attribute/Handlers ../../lib/auto/Attribute/Handlers \
Attribute-Handlers-0.89 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: demo/demo.pl
Not in MANIFEST: demo/Demo.pm
Not in MANIFEST: demo/demo2.pl
Not in MANIFEST: demo/demo3.pl
Not in MANIFEST: demo/demo4.pl
Not in MANIFEST: demo/demo_call.pl
Not in MANIFEST: demo/demo_chain.pl
Not in MANIFEST: demo/demo_cycle.pl
Not in MANIFEST: demo/demo_hashdir.pl
Not in MANIFEST: demo/demo_phases.pl
Not in MANIFEST: demo/demo_range.pl
Not in MANIFEST: demo/demo_rawdata.pl
Not in MANIFEST: demo/Descriptions.pm
Not in MANIFEST: demo/MyClass.pm
Not in MANIFEST: lib/Attribute/Handlers.pm
Not in MANIFEST: README
Not in MANIFEST: t/constants.t
Not in MANIFEST: t/data_convert.t
Not in MANIFEST: t/linerep.t
Not in MANIFEST: t/multi.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Attribute-Handlers'
Making AutoLoader (distclean)
Making distclean in cpan/AutoLoader
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/AutoLoader/extralibs.all \
core.[0-9][0-9] AutoLoader.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml AutoLoader.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/AutoLoader/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
AutoLoader.def core.[0-9][0-9][0-9] \
mon.out libAutoLoader.def \
perlmain.c perl.exe \
so_locations AutoLoader.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/AutoSplit.pm Makefile.old \
Makefile ../../lib/AutoLoader.pm
rm -rf \
../../lib/auto/AutoLoader ../../lib/auto/AutoLoader \
AutoLoader-5.71 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/AutoLoader.pm
Not in MANIFEST: lib/AutoSplit.pm
Not in MANIFEST: t/01AutoLoader.t
Not in MANIFEST: t/02AutoSplit.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/AutoLoader'
Making B::Debug (distclean)
Making distclean in cpan/B-Debug
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/B/Debug/extralibs.all \
core.[0-9][0-9] Debug.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Debug.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/B/Debug/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Debug.def core.[0-9][0-9][0-9] \
mon.out libDebug.def \
perlmain.c perl.exe \
so_locations Debug.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/B/Debug.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/B/Debug ../../lib/auto/B/Debug \
B-Debug-1.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Debug.pm
Not in MANIFEST: t/debug.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/B-Debug'
Making B::Deparse (distclean)
Making distclean in dist/B-Deparse
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/B/Deparse/extralibs.all \
core.[0-9][0-9] Deparse.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Deparse.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/B/Deparse/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Deparse.def core.[0-9][0-9][0-9] \
mon.out libDeparse.def \
perlmain.c perl.exe \
so_locations Deparse.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/B/Deparse.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/B/Deparse ../../lib/auto/B/Deparse \
B-Deparse-1.04 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Deparse.pm
Not in MANIFEST: t/deparse.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Deparse'
Making B::Lint (distclean)
Making distclean in dist/B-Lint
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/B/Lint/extralibs.all \
core.[0-9][0-9] Lint.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Lint.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/B/Lint/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Lint.def core.[0-9][0-9][0-9] \
mon.out libLint.def \
perlmain.c perl.exe \
so_locations Lint.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/B/Lint/Debug.pm ../../lib/B/Lint.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/B/Lint ../../lib/auto/B/Lint \
B-Lint-1.13 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/B/Lint.pm
Not in MANIFEST: lib/B/Lint/Debug.pm
Not in MANIFEST: t/lint.t
Not in MANIFEST: t/pluglib/B/Lint/Plugin/Test.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/B-Lint'
Making CGI (distclean)
Making distclean in cpan/CGI
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CGI/extralibs.all \
core.[0-9][0-9] CGI.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CGI.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CGI/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CGI.def core.[0-9][0-9][0-9] \
mon.out libCGI.def \
perlmain.c perl.exe \
so_locations CGI.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CGI/Fast.pm ../../lib/CGI.pm \
../../lib/CGI/Carp.pm ../../lib/CGI/Pretty.pm \
Makefile.old ../../lib/CGI/Push.pm \
../../lib/CGI/Switch.pm ../../lib/CGI/Apache.pm \
Makefile ../../lib/CGI/Cookie.pm \
../../lib/CGI/Util.pm
rm -rf \
../../lib/auto/CGI ../../lib/auto/CGI \
CGI-3.52 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: examples/caution.xbm
Not in MANIFEST: examples/clickable_image.cgi
Not in MANIFEST: examples/cookie.cgi
Not in MANIFEST: examples/crash.cgi
Not in MANIFEST: examples/customize.cgi
Not in MANIFEST: examples/diff_upload.cgi
Not in MANIFEST: examples/dna.small.gif
Not in MANIFEST: examples/file_upload.cgi
Not in MANIFEST: examples/frameset.cgi
Not in MANIFEST: examples/index.html
Not in MANIFEST: examples/internal_links.cgi
Not in MANIFEST: examples/javascript.cgi
Not in MANIFEST: examples/make_links.pl
Not in MANIFEST: examples/monty.cgi
Not in MANIFEST: examples/multiple_forms.cgi
Not in MANIFEST: examples/nph-clock.cgi
Not in MANIFEST: examples/nph-multipart.cgi
Not in MANIFEST: examples/popup.cgi
Not in MANIFEST: examples/save_state.cgi
Not in MANIFEST: examples/tryit.cgi
Not in MANIFEST: examples/wilogo.gif
Not in MANIFEST: lib/CGI.pm
Not in MANIFEST: lib/CGI/Apache.pm
Not in MANIFEST: lib/CGI/Carp.pm
Not in MANIFEST: lib/CGI/Cookie.pm
Not in MANIFEST: lib/CGI/Fast.pm
Not in MANIFEST: lib/CGI/Pretty.pm
Not in MANIFEST: lib/CGI/Push.pm
Not in MANIFEST: lib/CGI/Switch.pm
Not in MANIFEST: lib/CGI/Util.pm
Not in MANIFEST: t/apache.t
Not in MANIFEST: t/autoescape.t
Not in MANIFEST: t/can.t
Not in MANIFEST: t/carp.t
Not in MANIFEST: t/charset.t
Not in MANIFEST: t/checkbox_group.t
Not in MANIFEST: t/cookie.t
Not in MANIFEST: t/Dump.t
Not in MANIFEST: t/end_form.t
Not in MANIFEST: t/form.t
Not in MANIFEST: t/function.t
Not in MANIFEST: t/headers.t
Not in MANIFEST: t/hidden.t
Not in MANIFEST: t/html.t
Not in MANIFEST: t/http.t
Not in MANIFEST: t/init.t
Not in MANIFEST: t/init_test.txt
Not in MANIFEST: t/no_tabindex.t
Not in MANIFEST: t/param_fetch.t
Not in MANIFEST: t/popup_menu.t
Not in MANIFEST: t/pretty.t
Not in MANIFEST: t/push.t
Not in MANIFEST: t/query_string.t
Not in MANIFEST: t/request.t
Not in MANIFEST: t/save_read_roundtrip.t
Not in MANIFEST: t/start_end_asterisk.t
Not in MANIFEST: t/start_end_end.t
Not in MANIFEST: t/start_end_start.t
Not in MANIFEST: t/switch.t
Not in MANIFEST: t/unescapeHTML.t
Not in MANIFEST: t/upload.t
Not in MANIFEST: t/upload_post_text.txt
Not in MANIFEST: t/uploadInfo.t
Not in MANIFEST: t/url.t
Not in MANIFEST: t/user_agent.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: t/util-58.t
Not in MANIFEST: t/util.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CGI'
Making CPAN (distclean)
Making distclean in cpan/CPAN
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CPAN/extralibs.all \
core.[0-9][0-9] CPAN.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CPAN.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CPAN/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CPAN.def core.[0-9][0-9][0-9] \
mon.out libCPAN.def \
perlmain.c perl.exe \
so_locations CPAN.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CPAN/Debug.pm ../../lib/CPAN/Distroprefs.pm \
../../lib/CPAN/Exception/blocked_urllist.pm ../../lib/CPAN/Index.pm \
../../lib/CPAN/InfoObj.pm ../../lib/CPAN/Version.pm \
../../lib/CPAN/Module.pm ../../lib/CPAN/CacheMgr.pm \
Makefile ../../lib/CPAN/Complete.pm \
../../lib/CPAN/URL.pm ../../lib/CPAN/HTTP/Credentials.pm \
../../lib/CPAN/FirstTime.pm ../../lib/App/Cpan.pm \
../../lib/CPAN/Distrostatus.pm ../../lib/CPAN/DeferredCode.pm \
../../lib/CPAN/Bundle.pm ../../lib/CPAN/Nox.pm \
../../lib/CPAN/Tarzip.pm ../../lib/CPAN/Kwalify.pm \
Makefile.old ../../lib/CPAN/Author.pm \
../../lib/CPAN/Queue.pm ../../lib/CPAN/Exception/yaml_not_installed.pm \
../../lib/CPAN.pm ../../lib/CPAN/HTTP/Client.pm \
../../lib/CPAN/Kwalify/distroprefs.dd ../../lib/CPAN/Kwalify/distroprefs.yml \
../../lib/CPAN/API/HOWTO.pod ../../lib/CPAN/FTP/netrc.pm \
../../lib/CPAN/Shell.pm ../../lib/CPAN/Exception/RecursiveDependency.pm \
../../lib/CPAN/LWP/UserAgent.pm ../../lib/CPAN/Mirrors.pm \
../../lib/CPAN/FTP.pm ../../lib/CPAN/Prompt.pm \
../../lib/CPAN/Distribution.pm ../../lib/CPAN/HandleConfig.pm
rm -rf \
../../lib/auto/CPAN ../../lib/auto/CPAN \
CPAN-1.9600_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/App/Cpan.pm
Not in MANIFEST: lib/CPAN.pm
Not in MANIFEST: lib/CPAN/API/HOWTO.pod
Not in MANIFEST: lib/CPAN/Author.pm
Not in MANIFEST: lib/CPAN/Bundle.pm
Not in MANIFEST: lib/CPAN/CacheMgr.pm
Not in MANIFEST: lib/CPAN/Complete.pm
Not in MANIFEST: lib/CPAN/Debug.pm
Not in MANIFEST: lib/CPAN/DeferredCode.pm
Not in MANIFEST: lib/CPAN/Distribution.pm
Not in MANIFEST: lib/CPAN/Distroprefs.pm
Not in MANIFEST: lib/CPAN/Distrostatus.pm
Not in MANIFEST: lib/CPAN/Exception/blocked_urllist.pm
Not in MANIFEST: lib/CPAN/Exception/RecursiveDependency.pm
Not in MANIFEST: lib/CPAN/Exception/yaml_not_installed.pm
Not in MANIFEST: lib/CPAN/FirstTime.pm
Not in MANIFEST: lib/CPAN/FTP.pm
Not in MANIFEST: lib/CPAN/FTP/netrc.pm
Not in MANIFEST: lib/CPAN/HandleConfig.pm
Not in MANIFEST: lib/CPAN/HTTP/Client.pm
Not in MANIFEST: lib/CPAN/HTTP/Credentials.pm
Not in MANIFEST: lib/CPAN/Index.pm
Not in MANIFEST: lib/CPAN/InfoObj.pm
Not in MANIFEST: lib/CPAN/Kwalify.pm
Not in MANIFEST: lib/CPAN/Kwalify/distroprefs.dd
Not in MANIFEST: lib/CPAN/Kwalify/distroprefs.yml
Not in MANIFEST: lib/CPAN/LWP/UserAgent.pm
Not in MANIFEST: lib/CPAN/Mirrors.pm
Not in MANIFEST: lib/CPAN/Module.pm
Not in MANIFEST: lib/CPAN/Nox.pm
Not in MANIFEST: lib/CPAN/Prompt.pm
Not in MANIFEST: lib/CPAN/Queue.pm
Not in MANIFEST: lib/CPAN/Shell.pm
Not in MANIFEST: lib/CPAN/Tarzip.pm
Not in MANIFEST: lib/CPAN/URL.pm
Not in MANIFEST: lib/CPAN/Version.pm
Not in MANIFEST: PAUSE2003.pub
Not in MANIFEST: PAUSE2005.pub
Not in MANIFEST: PAUSE2007.pub
Not in MANIFEST: PAUSE2009.pub
Not in MANIFEST: PAUSE2011.pub
Not in MANIFEST: scripts/cpan
Not in MANIFEST: t/01loadme.t
Not in MANIFEST: t/02nox.t
Not in MANIFEST: t/03pkgs.t
Not in MANIFEST: t/10version.t
Not in MANIFEST: t/11mirroredby.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN'
Making CPAN::Meta (distclean)
Making distclean in cpan/CPAN-Meta
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CPAN/Meta/extralibs.all \
core.[0-9][0-9] Meta.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Meta.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CPAN/Meta/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Meta.def core.[0-9][0-9][0-9] \
mon.out libMeta.def \
perlmain.c perl.exe \
so_locations Meta.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CPAN/Meta/Feature.pm ../../lib/CPAN/Meta/Prereqs.pm \
Makefile.old ../../lib/CPAN/Meta/Spec.pm \
../../lib/CPAN/Meta/History.pm ../../lib/CPAN/Meta/Validator.pm \
../../lib/CPAN/Meta/Converter.pm Makefile \
../../lib/CPAN/Meta.pm
rm -rf \
../../lib/auto/CPAN/Meta ../../lib/auto/CPAN/Meta \
CPAN-Meta-2.110440 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/CPAN/Meta.pm
Not in MANIFEST: lib/CPAN/Meta/Converter.pm
Not in MANIFEST: lib/CPAN/Meta/Feature.pm
Not in MANIFEST: lib/CPAN/Meta/History.pm
Not in MANIFEST: lib/CPAN/Meta/Prereqs.pm
Not in MANIFEST: lib/CPAN/Meta/Spec.pm
Not in MANIFEST: lib/CPAN/Meta/Validator.pm
Not in MANIFEST: t/converter-bad.t
Not in MANIFEST: t/converter-fail.t
Not in MANIFEST: t/converter.t
Not in MANIFEST: t/data-bad/107650337-META.yml
Not in MANIFEST: t/data-bad/1122575719-META.yml
Not in MANIFEST: t/data-bad/1206545041-META.yml
Not in MANIFEST: t/data-bad/1598804075-META.yml
Not in MANIFEST: t/data-bad/1927486199-META.yml
Not in MANIFEST: t/data-bad/1985684504-META.yml
Not in MANIFEST: t/data-bad/1985980974-META.yml
Not in MANIFEST: t/data-bad/2031017050-META.yml
Not in MANIFEST: t/data-bad/284247103-META.yml
Not in MANIFEST: t/data-bad/344981821-META.yml
Not in MANIFEST: t/data-bad/35478989-META.yml
Not in MANIFEST: t/data-bad/476602558-META.yml
Not in MANIFEST: t/data-bad/98042513-META.yml
Not in MANIFEST: t/data-bad/META-1_0.yml
Not in MANIFEST: t/data-bad/META-1_1.yml
Not in MANIFEST: t/data-bad/META-1_2.yml
Not in MANIFEST: t/data-bad/META-1_3.yml
Not in MANIFEST: t/data-bad/META-1_4.yml
Not in MANIFEST: t/data-bad/META-2.json
Not in MANIFEST: t/data-bad/restrictive-2.json
Not in MANIFEST: t/data-fail/META-1_0.yml
Not in MANIFEST: t/data-fail/META-1_1.yml
Not in MANIFEST: t/data-fail/META-1_2.yml
Not in MANIFEST: t/data-fail/META-1_3.yml
Not in MANIFEST: t/data-fail/META-1_4.yml
Not in MANIFEST: t/data-fail/META-2.json
Not in MANIFEST: t/data/META-1_0.yml
Not in MANIFEST: t/data/META-1_1.yml
Not in MANIFEST: t/data/META-1_2.yml
Not in MANIFEST: t/data/META-1_3.yml
Not in MANIFEST: t/data/META-1_4.yml
Not in MANIFEST: t/data/META-2.json
Not in MANIFEST: t/data/resources.yml
Not in MANIFEST: t/data/restricted-2.json
Not in MANIFEST: t/data/restrictive-1_4.yml
Not in MANIFEST: t/load-bad.t
Not in MANIFEST: t/meta-obj.t
Not in MANIFEST: t/no-index.t
Not in MANIFEST: t/prereqs-finalize.t
Not in MANIFEST: t/prereqs-merge.t
Not in MANIFEST: t/prereqs.t
Not in MANIFEST: t/repository.t
Not in MANIFEST: t/save-load.t
Not in MANIFEST: t/validator.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta'
Making CPAN::Meta::YAML (distclean)
Making distclean in cpan/CPAN-Meta-YAML
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CPAN/Meta/YAML/extralibs.all \
core.[0-9][0-9] YAML.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml YAML.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CPAN/Meta/YAML/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
YAML.def core.[0-9][0-9][0-9] \
mon.out libYAML.def \
perlmain.c perl.exe \
so_locations YAML.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CPAN/Meta/YAML.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/CPAN/Meta/YAML ../../lib/auto/CPAN/Meta/YAML \
CPAN-Meta-YAML-0.003 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/CPAN/Meta/YAML.pm
Not in MANIFEST: t/01_compile.t
Not in MANIFEST: t/02_basic.t
Not in MANIFEST: t/03_regression.t
Not in MANIFEST: t/05_export.t
Not in MANIFEST: t/11_meta_yml.t
Not in MANIFEST: t/12_plagger.t
Not in MANIFEST: t/13_perl_smith.t
Not in MANIFEST: t/14_yaml_org.t
Not in MANIFEST: t/15_multibyte.t
Not in MANIFEST: t/16_nullrefs.t
Not in MANIFEST: t/17_toolbar.t
Not in MANIFEST: t/18_tap.t
Not in MANIFEST: t/19_errors.t
Not in MANIFEST: t/20_subclass.t
Not in MANIFEST: t/21_bom.t
Not in MANIFEST: t/22_comments.t
Not in MANIFEST: t/data/HTML-WebDAO.yml
Not in MANIFEST: t/data/multibyte.yml
Not in MANIFEST: t/data/one.yml
Not in MANIFEST: t/data/sample.yml
Not in MANIFEST: t/data/Spreadsheet-Read.yml
Not in MANIFEST: t/data/Template-Provider-Unicode-Japanese.yml
Not in MANIFEST: t/data/toolbar.yml
Not in MANIFEST: t/data/two.yml
Not in MANIFEST: t/data/utf_16_le_bom.yml
Not in MANIFEST: t/data/vanilla.yml
Not in MANIFEST: t/lib/Test.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPAN-Meta-YAML'
Making CPANPLUS (distclean)
Making distclean in cpan/CPANPLUS
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
rm -f \
blib/script/cpanp-run-perl blib/script/cpan2dist \
blib/script/cpanp
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CPANPLUS/extralibs.all \
core.[0-9][0-9] CPANPLUS.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CPANPLUS.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CPANPLUS/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CPANPLUS.def core.[0-9][0-9][0-9] \
mon.out libCPANPLUS.def \
perlmain.c perl.exe \
so_locations CPANPLUS.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CPANPLUS/Shell/Default/Plugins/Source.pm ../../lib/CPANPLUS/Dist/Sample.pm \
../../lib/CPANPLUS/Internals/Utils.pm ../../lib/CPANPLUS/Internals/Source/SQLite.pm \
../../lib/CPANPLUS/Internals/Utils/Autoflush.pm ../../lib/CPANPLUS/Selfupdate.pm \
../../lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm ../../lib/CPANPLUS/Configure.pm \
../../lib/CPANPLUS/Module/Author.pm ../../lib/CPANPLUS/Hacking.pod \
../../lib/CPANPLUS/Config/System.pm ../../lib/CPANPLUS/Dist/MM.pm \
../../lib/CPANPLUS/Module/Signature.pm Makefile \
../../lib/CPANPLUS/Internals/Source/Memory.pm ../../lib/CPANPLUS/Internals/Constants/Report.pm \
../../lib/CPANPLUS/Internals/Source.pm ../../lib/CPANPLUS/FAQ.pod \
../../lib/CPANPLUS/Module/Author/Fake.pm ../../lib/CPANPLUS/Shell/Classic.pm \
../../lib/CPANPLUS/Internals.pm ../../lib/CPANPLUS/Error.pm \
../../lib/CPANPLUS/Internals/Fetch.pm ../../lib/CPANPLUS/Dist.pm \
../../lib/CPANPLUS/Backend/RV.pm ../../lib/CPANPLUS/Dist/Autobundle.pm \
../../lib/CPANPLUS/Internals/Search.pm ../../lib/CPANPLUS/Internals/Source/SQLite/Tie.pm \
Makefile.old ../../lib/CPANPLUS/Dist/Base.pm \
../../lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod ../../lib/CPANPLUS/Shell/Default/Plugins/Remote.pm \
../../lib/CPANPLUS/Internals/Constants.pm ../../lib/CPANPLUS/Module.pm \
../../lib/CPANPLUS.pm ../../lib/CPANPLUS/Backend.pm \
../../lib/CPANPLUS/Shell.pm ../../lib/CPANPLUS/Module/Fake.pm \
../../lib/CPANPLUS/Config.pm ../../lib/CPANPLUS/Configure/Setup.pm \
../../lib/CPANPLUS/Internals/Extract.pm ../../lib/CPANPLUS/Internals/Report.pm \
../../lib/CPANPLUS/Shell/Default.pm ../../lib/CPANPLUS/Module/Checksums.pm
rm -rf \
../../lib/auto/CPANPLUS ../../lib/auto/CPANPLUS \
CPANPLUS-0.9103
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bin/cpan2dist
Not in MANIFEST: bin/cpanp
Not in MANIFEST: bin/cpanp-run-perl
Not in MANIFEST: lib/CPANPLUS.pm
Not in MANIFEST: lib/CPANPLUS/Backend.pm
Not in MANIFEST: lib/CPANPLUS/Backend/RV.pm
Not in MANIFEST: lib/CPANPLUS/Config.pm
Not in MANIFEST: lib/CPANPLUS/Config/System.pm
Not in MANIFEST: lib/CPANPLUS/Configure.pm
Not in MANIFEST: lib/CPANPLUS/Configure/Setup.pm
Not in MANIFEST: lib/CPANPLUS/Dist.pm
Not in MANIFEST: lib/CPANPLUS/Dist/Autobundle.pm
Not in MANIFEST: lib/CPANPLUS/Dist/Base.pm
Not in MANIFEST: lib/CPANPLUS/Dist/MM.pm
Not in MANIFEST: lib/CPANPLUS/Dist/Sample.pm
Not in MANIFEST: lib/CPANPLUS/Error.pm
Not in MANIFEST: lib/CPANPLUS/FAQ.pod
Not in MANIFEST: lib/CPANPLUS/Hacking.pod
Not in MANIFEST: lib/CPANPLUS/Internals.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Constants.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Constants/Report.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Extract.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Fetch.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Report.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Search.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Source.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Source/Memory.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Source/SQLite.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Source/SQLite/Tie.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Utils.pm
Not in MANIFEST: lib/CPANPLUS/Internals/Utils/Autoflush.pm
Not in MANIFEST: lib/CPANPLUS/Module.pm
Not in MANIFEST: lib/CPANPLUS/Module/Author.pm
Not in MANIFEST: lib/CPANPLUS/Module/Author/Fake.pm
Not in MANIFEST: lib/CPANPLUS/Module/Checksums.pm
Not in MANIFEST: lib/CPANPLUS/Module/Fake.pm
Not in MANIFEST: lib/CPANPLUS/Module/Signature.pm
Not in MANIFEST: lib/CPANPLUS/Selfupdate.pm
Not in MANIFEST: lib/CPANPLUS/Shell.pm
Not in MANIFEST: lib/CPANPLUS/Shell/Classic.pm
Not in MANIFEST: lib/CPANPLUS/Shell/Default.pm
Not in MANIFEST: lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm
Not in MANIFEST: lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod
Not in MANIFEST: lib/CPANPLUS/Shell/Default/Plugins/Remote.pm
Not in MANIFEST: lib/CPANPLUS/Shell/Default/Plugins/Source.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/00_CPANPLUS-Internals-Utils.t
Not in MANIFEST: t/01_CPANPLUS-Configure.t
Not in MANIFEST: t/02_CPANPLUS-Internals.t
Not in MANIFEST: t/03_CPANPLUS-Internals-Source.t
Not in MANIFEST: t/04_CPANPLUS-Module.t
Not in MANIFEST: t/05_CPANPLUS-Internals-Fetch.t
Not in MANIFEST: t/06_CPANPLUS-Internals-Constants.t
Not in MANIFEST: t/07_CPANPLUS-Internals-Extract.t
Not in MANIFEST: t/08_CPANPLUS-Backend.t
Not in MANIFEST: t/09_CPANPLUS-Internals-Search.t
Not in MANIFEST: t/10_CPANPLUS-Error.t
Not in MANIFEST: t/15_CPANPLUS-Shell.t
Not in MANIFEST: t/19_CPANPLUS-Dist.t
Not in MANIFEST: t/20_CPANPLUS-Dist-MM.t
Not in MANIFEST: t/21_CPANPLUS-Dist-No-Build.t
Not in MANIFEST: t/25_CPANPLUS.t
Not in MANIFEST: t/30_CPANPLUS-Internals-Selfupdate.t
Not in MANIFEST: t/40_CPANPLUS-Internals-Report.t
Not in MANIFEST: t/dummy-CPAN/authors/01mailrc.txt.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/Bundle-Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/CHECKSUMS
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/Foo-Bar-0.01.meta
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/Foo-Bar-0.01.readme
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/EUNOXS/perl5.005_03.tar.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/EUXS/CHECKSUMS
Not in MANIFEST: t/dummy-CPAN/authors/id/EUXS/Foo-Bar-0.01.readme
Not in MANIFEST: t/dummy-CPAN/authors/id/EUXS/Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/MBNOXS/CHECKSUMS
Not in MANIFEST: t/dummy-CPAN/authors/id/MBNOXS/Foo-Bar-0.01.readme
Not in MANIFEST: t/dummy-CPAN/authors/id/MBNOXS/Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/dummy-CPAN/authors/id/MBXS/CHECKSUMS
Not in MANIFEST: t/dummy-CPAN/authors/id/MBXS/Foo-Bar-0.01.readme
Not in MANIFEST: t/dummy-CPAN/authors/id/MBXS/Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/dummy-CPAN/autobundle/Snapshot.pm
Not in MANIFEST: t/dummy-CPAN/modules/02packages.details.txt.gz
Not in MANIFEST: t/dummy-CPAN/modules/03modlist.data.gz
Not in MANIFEST: t/inc/conf.pl
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS'
Making CPANPLUS::Dist::Build (distclean)
Making distclean in cpan/CPANPLUS-Dist-Build
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/CPANPLUS/Dist/Build/extralibs.all \
core.[0-9][0-9] Build.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Build.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/CPANPLUS/Dist/Build/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Build.def core.[0-9][0-9][0-9] \
mon.out libBuild.def \
perlmain.c perl.exe \
so_locations Build.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/CPANPLUS/Dist/Build.pm ../../lib/CPANPLUS/Dist/Build/Constants.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/CPANPLUS/Dist/Build ../../lib/auto/CPANPLUS/Dist/Build \
CPANPLUS-Dist-Build-0.54 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/CPANPLUS/Dist/Build.pm
Not in MANIFEST: lib/CPANPLUS/Dist/Build/Constants.pm
Not in MANIFEST: t/01_CPANPLUS-Dist-Build-Constants.t
Not in MANIFEST: t/02_CPANPLUS-Dist-Build.t
Not in MANIFEST: t/dummy-CPAN/authors/01mailrc.txt.gz
Not in MANIFEST: t/dummy-CPAN/modules/02packages.details.txt.gz
Not in MANIFEST: t/dummy-CPAN/modules/03modlist.data.gz
Not in MANIFEST: t/dummy-perl/.hidden
Not in MANIFEST: t/inc/conf.pl
Not in MANIFEST: t/src/noxs/Foo-Bar-0.01.tar.gz
Not in MANIFEST: t/src/xs/Foo-Bar-0.01.tar.gz
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/CPANPLUS-Dist-Build'
Making Devel::SelfStubber (distclean)
Making distclean in dist/Devel-SelfStubber
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Devel/SelfStubber/extralibs.all \
core.[0-9][0-9] SelfStubber.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml SelfStubber.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Devel/SelfStubber/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
SelfStubber.def core.[0-9][0-9][0-9] \
mon.out libSelfStubber.def \
perlmain.c perl.exe \
so_locations SelfStubber.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Devel/SelfStubber.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Devel/SelfStubber ../../lib/auto/Devel/SelfStubber \
Devel-SelfStubber-1.05 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Devel/SelfStubber.pm
Not in MANIFEST: t/Devel-SelfStubber.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Devel-SelfStubber'
Making Digest (distclean)
Making distclean in cpan/Digest
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Digest/extralibs.all \
core.[0-9][0-9] Digest.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Digest.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Digest/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Digest.def core.[0-9][0-9][0-9] \
mon.out libDigest.def \
perlmain.c perl.exe \
so_locations Digest.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Digest/base.pm ../../lib/Digest/file.pm \
../../lib/Digest.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Digest ../../lib/auto/Digest \
Digest-1.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Digest.pm
Not in MANIFEST: Digest/base.pm
Not in MANIFEST: Digest/file.pm
Not in MANIFEST: t/base.t
Not in MANIFEST: t/digest.t
Not in MANIFEST: t/file.t
Not in MANIFEST: t/security.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Digest'
Making Dumpvalue (distclean)
Making distclean in dist/Dumpvalue
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Dumpvalue/extralibs.all \
core.[0-9][0-9] Dumpvalue.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Dumpvalue.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Dumpvalue/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Dumpvalue.def core.[0-9][0-9][0-9] \
mon.out libDumpvalue.def \
perlmain.c perl.exe \
so_locations Dumpvalue.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Dumpvalue.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Dumpvalue ../../lib/auto/Dumpvalue \
Dumpvalue-1.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Dumpvalue.pm
Not in MANIFEST: t/Dumpvalue.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Dumpvalue'
Making Env (distclean)
Making distclean in dist/Env
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Env'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Env/extralibs.all \
core.[0-9][0-9] Env.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Env.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Env/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Env.def core.[0-9][0-9][0-9] \
mon.out libEnv.def \
perlmain.c perl.exe \
so_locations Env.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Env.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Env ../../lib/auto/Env \
Env-1.02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Env.pm
Not in MANIFEST: t/array.t
Not in MANIFEST: t/env.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Env'
Making Errno (distclean)
Making distclean in ext/Errno
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Errno'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Errno/extralibs.all \
core.[0-9][0-9] Errno.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Errno.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Errno/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Errno.def core.[0-9][0-9][0-9] \
mon.out libErrno.def \
perlmain.c perl.exe \
so_locations Errno.exp
rm -rf \
arch.txt blib \
Errno.pm
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Errno.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Errno ../../lib/auto/Errno \
Errno-1.13
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: Errno_pm.PL
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/Errno.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Errno'
Making ExtUtils::CBuilder (distclean)
Making distclean in dist/ExtUtils-CBuilder
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/CBuilder/extralibs.all \
core.[0-9][0-9] CBuilder.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CBuilder.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/CBuilder/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CBuilder.def core.[0-9][0-9][0-9] \
mon.out libCBuilder.def \
perlmain.c perl.exe \
so_locations CBuilder.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/CBuilder/Platform/darwin.pm ../../lib/ExtUtils/CBuilder/Platform/Windows.pm \
../../lib/ExtUtils/CBuilder/Platform/os2.pm ../../lib/ExtUtils/CBuilder/Platform/Unix.pm \
../../lib/ExtUtils/CBuilder/Platform/Windows/BCC.pm ../../lib/ExtUtils/CBuilder/Base.pm \
../../lib/ExtUtils/CBuilder/Platform/VMS.pm ../../lib/ExtUtils/CBuilder/Platform/dec_osf.pm \
../../lib/ExtUtils/CBuilder/Platform/Windows/MSVC.pm Makefile.old \
../../lib/ExtUtils/CBuilder/Platform/cygwin.pm ../../lib/ExtUtils/CBuilder/Platform/aix.pm \
../../lib/ExtUtils/CBuilder.pm Makefile \
../../lib/ExtUtils/CBuilder/Platform/Windows/GCC.pm
rm -rf \
../../lib/auto/ExtUtils/CBuilder ../../lib/auto/ExtUtils/CBuilder \
ExtUtils-CBuilder-0.280203 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/ExtUtils/CBuilder.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Base.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/aix.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/cygwin.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/darwin.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/dec_osf.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/os2.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/Unix.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/VMS.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/Windows.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/Windows/BCC.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/Windows/GCC.pm
Not in MANIFEST: lib/ExtUtils/CBuilder/Platform/Windows/MSVC.pm
Not in MANIFEST: t/00-have-compiler.t
Not in MANIFEST: t/01-basic.t
Not in MANIFEST: t/02-link.t
Not in MANIFEST: t/03-cplusplus.t
Not in MANIFEST: t/04-base.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-CBuilder'
Making ExtUtils::Command (distclean)
Making distclean in dist/ExtUtils-Command
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/Command/extralibs.all \
core.[0-9][0-9] Command.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Command.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/Command/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Command.def core.[0-9][0-9][0-9] \
mon.out libCommand.def \
perlmain.c perl.exe \
so_locations Command.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Makefile.old Makefile \
../../lib/ExtUtils/Command.pm
rm -rf \
../../lib/auto/ExtUtils/Command ../../lib/auto/ExtUtils/Command \
ExtUtils-Command-1.17 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/ExtUtils/Command.pm
Not in MANIFEST: t/cp.t
Not in MANIFEST: t/eu_command.t
Not in MANIFEST: t/lib/TieOut.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Command'
Making ExtUtils::Constant (distclean)
Making distclean in cpan/ExtUtils-Constant
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/Constant/extralibs.all \
core.[0-9][0-9] Constant.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Constant.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/Constant/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Constant.def core.[0-9][0-9][0-9] \
mon.out libConstant.def \
perlmain.c perl.exe \
so_locations Constant.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/Constant/Utils.pm ../../lib/ExtUtils/Constant.pm \
../../lib/ExtUtils/Constant/Base.pm ../../lib/ExtUtils/Constant/XS.pm \
../../lib/ExtUtils/Constant/ProxySubs.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/ExtUtils/Constant ../../lib/auto/ExtUtils/Constant \
ExtUtils-Constant-0.23 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/ExtUtils/Constant.pm
Not in MANIFEST: lib/ExtUtils/Constant/Base.pm
Not in MANIFEST: lib/ExtUtils/Constant/ProxySubs.pm
Not in MANIFEST: lib/ExtUtils/Constant/Utils.pm
Not in MANIFEST: lib/ExtUtils/Constant/XS.pm
Not in MANIFEST: t/Constant.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-Constant'
Making ExtUtils::Install (distclean)
Making distclean in dist/ExtUtils-Install
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/Install/extralibs.all \
core.[0-9][0-9] Install.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Install.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/Install/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Install.def core.[0-9][0-9][0-9] \
mon.out libInstall.def \
perlmain.c perl.exe \
so_locations Install.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/Install.pm ../../lib/ExtUtils/Installed.pm \
../../lib/ExtUtils/Packlist.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/ExtUtils/Install ../../lib/auto/ExtUtils/Install \
ExtUtils-Install-1.56 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/ExtUtils/Install.pm
Not in MANIFEST: lib/ExtUtils/Installed.pm
Not in MANIFEST: lib/ExtUtils/Packlist.pm
Not in MANIFEST: t/can_write_dir.t
Not in MANIFEST: t/Install.t
Not in MANIFEST: t/Installapi2.t
Not in MANIFEST: t/Installed.t
Not in MANIFEST: t/InstallWithMM.t
Not in MANIFEST: t/lib/MakeMaker/Test/Setup/BFD.pm
Not in MANIFEST: t/lib/MakeMaker/Test/Utils.pm
Not in MANIFEST: t/lib/TieOut.pm
Not in MANIFEST: t/Packlist.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Install'
Making ExtUtils::MakeMaker (distclean)
Making distclean in cpan/ExtUtils-MakeMaker
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/MakeMaker/extralibs.all \
core.[0-9][0-9] MakeMaker.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml MakeMaker.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/MakeMaker/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
MakeMaker.def core.[0-9][0-9][0-9] \
mon.out libMakeMaker.def \
perlmain.c perl.exe \
so_locations MakeMaker.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/MM_OS2.pm ../../lib/ExtUtils/MM_Win95.pm \
../../lib/ExtUtils/Mkbootstrap.pm Makefile.old \
../../lib/ExtUtils/MM_Cygwin.pm ../../lib/ExtUtils/Command/MM.pm \
../../lib/ExtUtils/MakeMaker/YAML.pm ../../lib/ExtUtils/MakeMaker/Tutorial.pod \
../../lib/ExtUtils/MM_AIX.pm ../../lib/ExtUtils/MakeMaker/FAQ.pod \
Makefile ../../lib/ExtUtils/MM_Any.pm \
../../lib/ExtUtils/MakeMaker/Config.pm ../../lib/ExtUtils/MM_UWIN.pm \
../../lib/ExtUtils/MM_VOS.pm ../../lib/ExtUtils/Mksymlists.pm \
../../lib/ExtUtils/MakeMaker.pm ../../lib/ExtUtils/MM_NW5.pm \
../../lib/ExtUtils/MM_DOS.pm ../../lib/ExtUtils/MM_MacOS.pm \
../../lib/ExtUtils/MM_Win32.pm ../../lib/ExtUtils/Liblist/Kid.pm \
../../lib/ExtUtils/testlib.pm ../../lib/ExtUtils/MM_QNX.pm \
../../lib/ExtUtils/MM_BeOS.pm ../../lib/ExtUtils/MY.pm \
../../lib/ExtUtils/Liblist.pm ../../lib/ExtUtils/MM_Unix.pm \
../../lib/ExtUtils/MM_Darwin.pm ../../lib/ExtUtils/MM_VMS.pm \
../../lib/ExtUtils/MM.pm
rm -rf \
../../lib/auto/ExtUtils/MakeMaker ../../lib/auto/ExtUtils/MakeMaker \
ExtUtils-MakeMaker-6.57_05 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
No such file: .gitignore
No such file: inc/ExtUtils/Command.pm
No such file: inc/ExtUtils/Install.pm
No such file: inc/ExtUtils/Installed.pm
No such file: inc/ExtUtils/Manifest.pm
No such file: inc/ExtUtils/MANIFEST.SKIP
No such file: inc/ExtUtils/Packlist.pm
No such file: INSTALL
No such file: Makefile.PL
No such file: MANIFEST.SKIP
No such file: META.yml
No such file: t/lib/Test/Builder.pm
No such file: t/lib/Test/Builder/IO/Scalar.pm
No such file: t/lib/Test/Builder/Module.pm
No such file: t/lib/Test/More.pm
No such file: t/lib/Test/Simple.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/ExtUtils-MakeMaker'
Making ExtUtils::Manifest (distclean)
Making distclean in dist/ExtUtils-Manifest
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/Manifest/extralibs.all \
core.[0-9][0-9] Manifest.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Manifest.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/Manifest/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Manifest.def core.[0-9][0-9][0-9] \
mon.out libManifest.def \
perlmain.c perl.exe \
so_locations Manifest.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/MANIFEST.SKIP ../../lib/ExtUtils/Manifest.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/ExtUtils/Manifest ../../lib/auto/ExtUtils/Manifest \
ExtUtils-Manifest-1.58 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/ExtUtils/Manifest.pm
Not in MANIFEST: lib/ExtUtils/MANIFEST.SKIP
Not in MANIFEST: t/Manifest.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest'
Making ExtUtils::ParseXS (distclean)
Making distclean in dist/ExtUtils-ParseXS
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/ExtUtils/ParseXS/extralibs.all \
core.[0-9][0-9] ParseXS.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml ParseXS.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/ExtUtils/ParseXS/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
ParseXS.def core.[0-9][0-9][0-9] \
mon.out libParseXS.def \
perlmain.c perl.exe \
so_locations ParseXS.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/ExtUtils/ParseXS.pm ../../lib/ExtUtils/xsubpp \
Makefile.old Makefile
rm -rf \
../../lib/auto/ExtUtils/ParseXS ../../lib/auto/ExtUtils/ParseXS \
ExtUtils-ParseXS-2.2210 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/ExtUtils/ParseXS.pm
Not in MANIFEST: lib/ExtUtils/xsubpp
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/lib/IncludeTester.pm
Not in MANIFEST: t/more.t
Not in MANIFEST: t/typemap
Not in MANIFEST: t/usage.t
Not in MANIFEST: t/XSInclude.xsh
Not in MANIFEST: t/XSMore.xs
Not in MANIFEST: t/XSTest.pm
Not in MANIFEST: t/XSTest.xs
Not in MANIFEST: t/XSUsage.pm
Not in MANIFEST: t/XSUsage.xs
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/ExtUtils-ParseXS'
Making File::CheckTree (distclean)
Making distclean in dist/File-CheckTree
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/File/CheckTree/extralibs.all \
core.[0-9][0-9] CheckTree.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CheckTree.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/File/CheckTree/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CheckTree.def core.[0-9][0-9][0-9] \
mon.out libCheckTree.def \
perlmain.c perl.exe \
so_locations CheckTree.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/File/CheckTree.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/File/CheckTree ../../lib/auto/File/CheckTree \
File-CheckTree-4.41 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/File/CheckTree.pm
Not in MANIFEST: t/CheckTree.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/File-CheckTree'
Making File::Fetch (distclean)
Making distclean in cpan/File-Fetch
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/File/Fetch/extralibs.all \
core.[0-9][0-9] Fetch.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Fetch.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/File/Fetch/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Fetch.def core.[0-9][0-9][0-9] \
mon.out libFetch.def \
perlmain.c perl.exe \
so_locations Fetch.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Makefile.old Makefile \
../../lib/File/Fetch.pm
rm -rf \
../../lib/auto/File/Fetch ../../lib/auto/File/Fetch \
File-Fetch-0.32 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/File/Fetch.pm
Not in MANIFEST: t/01_File-Fetch.t
Not in MANIFEST: t/null_subclass.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Fetch'
Making File::Path (distclean)
Making distclean in cpan/File-Path
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/File/Path/extralibs.all \
core.[0-9][0-9] Path.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Path.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/File/Path/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Path.def core.[0-9][0-9][0-9] \
mon.out libPath.def \
perlmain.c perl.exe \
so_locations Path.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/File/Path.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/File/Path ../../lib/auto/File/Path \
File-Path-2.08_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/File/Path.pm
Not in MANIFEST: t/Path.t
Not in MANIFEST: t/taint.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Path'
Making File::Temp (distclean)
Making distclean in cpan/File-Temp
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/File/Temp/extralibs.all \
core.[0-9][0-9] Temp.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Temp.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/File/Temp/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Temp.def core.[0-9][0-9][0-9] \
mon.out libTemp.def \
perlmain.c perl.exe \
so_locations Temp.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/File/Temp.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/File/Temp ../../lib/auto/File/Temp \
File-Temp-0.22 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: t/cmp.t
Not in MANIFEST: t/fork.t
Not in MANIFEST: t/lock.t
Not in MANIFEST: t/mktemp.t
Not in MANIFEST: t/object.t
Not in MANIFEST: t/posix.t
Not in MANIFEST: t/security.t
Not in MANIFEST: t/seekable.t
Not in MANIFEST: t/tempfile.t
Not in MANIFEST: Temp.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/File-Temp'
Making FileCache (distclean)
Making distclean in ext/FileCache
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/FileCache/extralibs.all \
core.[0-9][0-9] FileCache.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml FileCache.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/FileCache/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
FileCache.def core.[0-9][0-9][0-9] \
mon.out libFileCache.def \
perlmain.c perl.exe \
so_locations FileCache.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/FileCache.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/FileCache ../../lib/auto/FileCache \
FileCache-1.08 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/FileCache.pm
Not in MANIFEST: t/01open.t
Not in MANIFEST: t/02maxopen.t
Not in MANIFEST: t/03append.t
Not in MANIFEST: t/04twoarg.t
Not in MANIFEST: t/05override.t
Not in MANIFEST: t/06export.t
Not in MANIFEST: t/07noimport.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/FileCache'
Making Filter::Simple (distclean)
Making distclean in dist/Filter-Simple
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Filter/Simple/extralibs.all \
core.[0-9][0-9] Simple.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Simple.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Filter/Simple/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Simple.def core.[0-9][0-9][0-9] \
mon.out libSimple.def \
perlmain.c perl.exe \
so_locations Simple.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Filter/Simple.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Filter/Simple ../../lib/auto/Filter/Simple \
Filter-Simple-0.86 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Filter/Simple.pm
Not in MANIFEST: t/data.t
Not in MANIFEST: t/export.t
Not in MANIFEST: t/filter.t
Not in MANIFEST: t/filter_only.t
Not in MANIFEST: t/import.t
Not in MANIFEST: t/lib/Filter/Simple/ExportTest.pm
Not in MANIFEST: t/lib/Filter/Simple/FilterOnlyTest.pm
Not in MANIFEST: t/lib/Filter/Simple/FilterTest.pm
Not in MANIFEST: t/lib/Filter/Simple/ImportTest.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Filter-Simple'
Making Getopt::Long (distclean)
Making distclean in cpan/Getopt-Long
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Getopt/Long/extralibs.all \
core.[0-9][0-9] Long.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Long.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Getopt/Long/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Long.def core.[0-9][0-9][0-9] \
mon.out libLong.def \
perlmain.c perl.exe \
so_locations Long.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Getopt/Long.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Getopt/Long ../../lib/auto/Getopt/Long \
Getopt-Long-2.38 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: CHANGES
Not in MANIFEST: lib/Getopt/Long.pm
Not in MANIFEST: README
Not in MANIFEST: t/gol-basic.t
Not in MANIFEST: t/gol-compat.t
Not in MANIFEST: t/gol-linkage.t
Not in MANIFEST: t/gol-oo.t
Not in MANIFEST: t/gol-xargv.t
Not in MANIFEST: t/gol-xstring.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Getopt-Long'
Making HTTP::Tiny (distclean)
Making distclean in cpan/HTTP-Tiny
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/HTTP/Tiny/extralibs.all \
core.[0-9][0-9] Tiny.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Tiny.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/HTTP/Tiny/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Tiny.def core.[0-9][0-9][0-9] \
mon.out libTiny.def \
perlmain.c perl.exe \
so_locations Tiny.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/HTTP/Tiny.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/HTTP/Tiny ../../lib/auto/HTTP/Tiny \
HTTP-Tiny-0.012 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/HTTP/Tiny.pm
Not in MANIFEST: t/00-compile.t
Not in MANIFEST: t/000_load.t
Not in MANIFEST: t/001_api.t
Not in MANIFEST: t/002_croakage.t
Not in MANIFEST: t/010_url.t
Not in MANIFEST: t/020_headers.t
Not in MANIFEST: t/030_response.t
Not in MANIFEST: t/040_content.t
Not in MANIFEST: t/050_chunked_body.t
Not in MANIFEST: t/060_http_date.t
Not in MANIFEST: t/100_get.t
Not in MANIFEST: t/110_mirror.t
Not in MANIFEST: t/120_put.t
Not in MANIFEST: t/130_redirect.t
Not in MANIFEST: t/cases/get-01.txt
Not in MANIFEST: t/cases/get-02.txt
Not in MANIFEST: t/cases/get-03.txt
Not in MANIFEST: t/cases/get-04.txt
Not in MANIFEST: t/cases/get-05.txt
Not in MANIFEST: t/cases/get-06.txt
Not in MANIFEST: t/cases/get-07.txt
Not in MANIFEST: t/cases/get-08.txt
Not in MANIFEST: t/cases/get-09.txt
Not in MANIFEST: t/cases/get-10.txt
Not in MANIFEST: t/cases/get-11.txt
Not in MANIFEST: t/cases/get-12.txt
Not in MANIFEST: t/cases/get-13.txt
Not in MANIFEST: t/cases/get-14.txt
Not in MANIFEST: t/cases/get-15.txt
Not in MANIFEST: t/cases/get-16.txt
Not in MANIFEST: t/cases/get-17.txt
Not in MANIFEST: t/cases/get-18.txt
Not in MANIFEST: t/cases/get-19.txt
Not in MANIFEST: t/cases/get-20.txt
Not in MANIFEST: t/cases/get-21.txt
Not in MANIFEST: t/cases/mirror-01.txt
Not in MANIFEST: t/cases/mirror-02.txt
Not in MANIFEST: t/cases/mirror-03.txt
Not in MANIFEST: t/cases/mirror-04.txt
Not in MANIFEST: t/cases/mirror-05.txt
Not in MANIFEST: t/cases/put-01.txt
Not in MANIFEST: t/cases/put-02.txt
Not in MANIFEST: t/cases/put-03.txt
Not in MANIFEST: t/cases/put-04.txt
Not in MANIFEST: t/cases/put-05.txt
Not in MANIFEST: t/cases/redirect-01.txt
Not in MANIFEST: t/cases/redirect-02.txt
Not in MANIFEST: t/cases/redirect-03.txt
Not in MANIFEST: t/cases/redirect-04.txt
Not in MANIFEST: t/cases/redirect-05.txt
Not in MANIFEST: t/cases/redirect-06.txt
Not in MANIFEST: t/cases/redirect-07.txt
Not in MANIFEST: t/cases/redirect-08.txt
Not in MANIFEST: t/cases/redirect-09.txt
Not in MANIFEST: t/Util.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/HTTP-Tiny'
Making I18N::Collate (distclean)
Making distclean in dist/I18N-Collate
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/I18N/Collate/extralibs.all \
core.[0-9][0-9] Collate.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Collate.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/I18N/Collate/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Collate.def core.[0-9][0-9][0-9] \
mon.out libCollate.def \
perlmain.c perl.exe \
so_locations Collate.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/I18N/Collate.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/I18N/Collate ../../lib/auto/I18N/Collate \
I18N-Collate-1.02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/I18N/Collate.pm
Not in MANIFEST: t/I18N-Collate.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-Collate'
Making I18N::LangTags (distclean)
Making distclean in dist/I18N-LangTags
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/I18N/LangTags/extralibs.all \
core.[0-9][0-9] LangTags.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml LangTags.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/I18N/LangTags/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
LangTags.def core.[0-9][0-9][0-9] \
mon.out libLangTags.def \
perlmain.c perl.exe \
so_locations LangTags.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/I18N/LangTags/List.pm ../../lib/I18N/LangTags.pm \
../../lib/I18N/LangTags/Detect.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/I18N/LangTags ../../lib/auto/I18N/LangTags \
I18N-LangTags-0.35_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: lib/I18N/LangTags.pm
Not in MANIFEST: lib/I18N/LangTags/Detect.pm
Not in MANIFEST: lib/I18N/LangTags/List.pm
Not in MANIFEST: README
Not in MANIFEST: t/01_about_verbose.t
Not in MANIFEST: t/05_main.t
Not in MANIFEST: t/07_listy.t
Not in MANIFEST: t/10_http.t
Not in MANIFEST: t/20_locales.t
Not in MANIFEST: t/50_super.t
Not in MANIFEST: t/55_supers_strict.t
Not in MANIFEST: t/80_all_env.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/I18N-LangTags'
Making IO::Compress (distclean)
Making distclean in cpan/IO-Compress
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IO/Compress/extralibs.all \
core.[0-9][0-9] Compress.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Compress.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IO/Compress/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Compress.def core.[0-9][0-9][0-9] \
mon.out libCompress.def \
perlmain.c perl.exe \
so_locations Compress.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IO/Uncompress/Inflate.pm ../../lib/IO/Uncompress/AnyInflate.pm \
../../lib/IO/Uncompress/Adapter/Bunzip2.pm ../../lib/IO/Uncompress/AnyUncompress.pm \
../../lib/Compress/Zlib.pm ../../lib/IO/Compress/Gzip/Constants.pm \
Makefile.old ../../lib/IO/Uncompress/Unzip.pm \
../../lib/IO/Compress/Bzip2.pm ../../lib/IO/Uncompress/Base.pm \
../../lib/IO/Compress/Zlib/Constants.pm ../../lib/IO/Compress/Zlib/Extra.pm \
Makefile ../../lib/IO/Compress/Base/Common.pm \
../../lib/IO/Uncompress/Adapter/Inflate.pm ../../lib/IO/Compress/Adapter/Bzip2.pm \
../../lib/IO/Compress/Adapter/Identity.pm ../../lib/File/GlobMapper.pm \
../../lib/IO/Compress/RawDeflate.pm ../../lib/IO/Uncompress/RawInflate.pm \
../../lib/IO/Compress/Gzip.pm ../../lib/IO/Compress/Zip/Constants.pm \
../../lib/IO/Compress/Base.pm ../../lib/IO/Compress/Zip.pm \
../../lib/IO/Uncompress/Gunzip.pm ../../lib/IO/Uncompress/Adapter/Identity.pm \
../../lib/IO/Compress/Adapter/Deflate.pm ../../lib/IO/Uncompress/Bunzip2.pm \
../../lib/IO/Compress/Deflate.pm
rm -rf \
../../lib/auto/IO/Compress ../../lib/auto/IO/Compress \
IO-Compress-2.033
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: examples/compress-zlib/filtdef
Not in MANIFEST: examples/compress-zlib/filtinf
Not in MANIFEST: examples/compress-zlib/gzcat
Not in MANIFEST: examples/compress-zlib/gzgrep
Not in MANIFEST: examples/compress-zlib/gzstream
Not in MANIFEST: examples/io/anycat
Not in MANIFEST: examples/io/bzip2/bzcat
Not in MANIFEST: examples/io/bzip2/bzgrep
Not in MANIFEST: examples/io/bzip2/bzstream
Not in MANIFEST: examples/io/gzip/gzappend
Not in MANIFEST: examples/io/gzip/gzcat
Not in MANIFEST: examples/io/gzip/gzgrep
Not in MANIFEST: examples/io/gzip/gzstream
Not in MANIFEST: lib/Compress/Zlib.pm
Not in MANIFEST: lib/File/GlobMapper.pm
Not in MANIFEST: lib/IO/Compress/Adapter/Bzip2.pm
Not in MANIFEST: lib/IO/Compress/Adapter/Deflate.pm
Not in MANIFEST: lib/IO/Compress/Adapter/Identity.pm
Not in MANIFEST: lib/IO/Compress/Base.pm
Not in MANIFEST: lib/IO/Compress/Base/Common.pm
Not in MANIFEST: lib/IO/Compress/Bzip2.pm
Not in MANIFEST: lib/IO/Compress/Deflate.pm
Not in MANIFEST: lib/IO/Compress/Gzip.pm
Not in MANIFEST: lib/IO/Compress/Gzip/Constants.pm
Not in MANIFEST: lib/IO/Compress/RawDeflate.pm
Not in MANIFEST: lib/IO/Compress/Zip.pm
Not in MANIFEST: lib/IO/Compress/Zip/Constants.pm
Not in MANIFEST: lib/IO/Compress/Zlib/Constants.pm
Not in MANIFEST: lib/IO/Compress/Zlib/Extra.pm
Not in MANIFEST: lib/IO/Uncompress/Adapter/Bunzip2.pm
Not in MANIFEST: lib/IO/Uncompress/Adapter/Identity.pm
Not in MANIFEST: lib/IO/Uncompress/Adapter/Inflate.pm
Not in MANIFEST: lib/IO/Uncompress/AnyInflate.pm
Not in MANIFEST: lib/IO/Uncompress/AnyUncompress.pm
Not in MANIFEST: lib/IO/Uncompress/Base.pm
Not in MANIFEST: lib/IO/Uncompress/Bunzip2.pm
Not in MANIFEST: lib/IO/Uncompress/Gunzip.pm
Not in MANIFEST: lib/IO/Uncompress/Inflate.pm
Not in MANIFEST: lib/IO/Uncompress/RawInflate.pm
Not in MANIFEST: lib/IO/Uncompress/Unzip.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: pod/FAQ.pod
Not in MANIFEST: private/MakeUtil.pm
Not in MANIFEST: README
Not in MANIFEST: t/000prereq.t
Not in MANIFEST: t/001bzip2.t
Not in MANIFEST: t/001zlib-generic-deflate.t
Not in MANIFEST: t/001zlib-generic-gzip.t
Not in MANIFEST: t/001zlib-generic-rawdeflate.t
Not in MANIFEST: t/001zlib-generic-zip.t
Not in MANIFEST: t/002any-deflate.t
Not in MANIFEST: t/002any-gzip.t
Not in MANIFEST: t/002any-rawdeflate.t
Not in MANIFEST: t/002any-transparent.t
Not in MANIFEST: t/002any-zip.t
Not in MANIFEST: t/004gziphdr.t
Not in MANIFEST: t/005defhdr.t
Not in MANIFEST: t/006zip.t
Not in MANIFEST: t/010examples-bzip2.t
Not in MANIFEST: t/010examples-zlib.t
Not in MANIFEST: t/01misc.t
Not in MANIFEST: t/020isize.t
Not in MANIFEST: t/050interop-gzip.t
Not in MANIFEST: t/100generic-bzip2.t
Not in MANIFEST: t/100generic-deflate.t
Not in MANIFEST: t/100generic-gzip.t
Not in MANIFEST: t/100generic-rawdeflate.t
Not in MANIFEST: t/100generic-zip.t
Not in MANIFEST: t/101truncate-bzip2.t
Not in MANIFEST: t/101truncate-deflate.t
Not in MANIFEST: t/101truncate-gzip.t
Not in MANIFEST: t/101truncate-rawdeflate.t
Not in MANIFEST: t/101truncate-zip.t
Not in MANIFEST: t/102tied-bzip2.t
Not in MANIFEST: t/102tied-deflate.t
Not in MANIFEST: t/102tied-gzip.t
Not in MANIFEST: t/102tied-rawdeflate.t
Not in MANIFEST: t/102tied-zip.t
Not in MANIFEST: t/103newtied-bzip2.t
Not in MANIFEST: t/103newtied-deflate.t
Not in MANIFEST: t/103newtied-gzip.t
Not in MANIFEST: t/103newtied-rawdeflate.t
Not in MANIFEST: t/103newtied-zip.t
Not in MANIFEST: t/104destroy-bzip2.t
Not in MANIFEST: t/104destroy-deflate.t
Not in MANIFEST: t/104destroy-gzip.t
Not in MANIFEST: t/104destroy-rawdeflate.t
Not in MANIFEST: t/104destroy-zip.t
Not in MANIFEST: t/105oneshot-bzip2.t
Not in MANIFEST: t/105oneshot-deflate.t
Not in MANIFEST: t/105oneshot-gzip-only.t
Not in MANIFEST: t/105oneshot-gzip.t
Not in MANIFEST: t/105oneshot-rawdeflate.t
Not in MANIFEST: t/105oneshot-zip-bzip2-only.t
Not in MANIFEST: t/105oneshot-zip-only.t
Not in MANIFEST: t/105oneshot-zip.t
Not in MANIFEST: t/106prime-bzip2.t
Not in MANIFEST: t/106prime-deflate.t
Not in MANIFEST: t/106prime-gzip.t
Not in MANIFEST: t/106prime-rawdeflate.t
Not in MANIFEST: t/106prime-zip.t
Not in MANIFEST: t/107multi-bzip2.t
Not in MANIFEST: t/107multi-deflate.t
Not in MANIFEST: t/107multi-gzip.t
Not in MANIFEST: t/107multi-rawdeflate.t
Not in MANIFEST: t/107multi-zip.t
Not in MANIFEST: t/108anyunc-bzip2.t
Not in MANIFEST: t/108anyunc-deflate.t
Not in MANIFEST: t/108anyunc-gzip.t
Not in MANIFEST: t/108anyunc-rawdeflate.t
Not in MANIFEST: t/108anyunc-transparent.t
Not in MANIFEST: t/108anyunc-zip.t
Not in MANIFEST: t/109merge-deflate.t
Not in MANIFEST: t/109merge-gzip.t
Not in MANIFEST: t/109merge-rawdeflate.t
Not in MANIFEST: t/109merge-zip.t
Not in MANIFEST: t/110encode-bzip2.t
Not in MANIFEST: t/110encode-deflate.t
Not in MANIFEST: t/110encode-gzip.t
Not in MANIFEST: t/110encode-rawdeflate.t
Not in MANIFEST: t/110encode-zip.t
Not in MANIFEST: t/999pod.t
Not in MANIFEST: t/compress/any.pl
Not in MANIFEST: t/compress/anyunc.pl
Not in MANIFEST: t/compress/CompTestUtils.pm
Not in MANIFEST: t/compress/destroy.pl
Not in MANIFEST: t/compress/encode.pl
Not in MANIFEST: t/compress/generic.pl
Not in MANIFEST: t/compress/merge.pl
Not in MANIFEST: t/compress/multi.pl
Not in MANIFEST: t/compress/newtied.pl
Not in MANIFEST: t/compress/oneshot.pl
Not in MANIFEST: t/compress/prime.pl
Not in MANIFEST: t/compress/tied.pl
Not in MANIFEST: t/compress/truncate.pl
Not in MANIFEST: t/compress/zlib-generic.pl
Not in MANIFEST: t/cz-01version.t
Not in MANIFEST: t/cz-03zlib-v1.t
Not in MANIFEST: t/cz-05examples.t
Not in MANIFEST: t/cz-06gzsetp.t
Not in MANIFEST: t/cz-08encoding.t
Not in MANIFEST: t/cz-14gzopen.t
Not in MANIFEST: t/globmapper.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Compress'
Making IO::Zlib (distclean)
Making distclean in cpan/IO-Zlib
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IO/Zlib/extralibs.all \
core.[0-9][0-9] Zlib.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Zlib.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IO/Zlib/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Zlib.def core.[0-9][0-9][0-9] \
mon.out libZlib.def \
perlmain.c perl.exe \
so_locations Zlib.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IO/Zlib.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/IO/Zlib ../../lib/auto/IO/Zlib \
IO-Zlib-1.10 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/external.t
Not in MANIFEST: t/getc.t
Not in MANIFEST: t/getline.t
Not in MANIFEST: t/import.t
Not in MANIFEST: t/large.t
Not in MANIFEST: t/tied.t
Not in MANIFEST: t/uncomp1.t
Not in MANIFEST: t/uncomp2.t
Not in MANIFEST: Zlib.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IO-Zlib'
Making IPC::Cmd (distclean)
Making distclean in cpan/IPC-Cmd
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IPC/Cmd/extralibs.all \
core.[0-9][0-9] Cmd.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Cmd.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IPC/Cmd/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Cmd.def core.[0-9][0-9][0-9] \
mon.out libCmd.def \
perlmain.c perl.exe \
so_locations Cmd.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IPC/Cmd.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/IPC/Cmd ../../lib/auto/IPC/Cmd \
IPC-Cmd-0.70 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/IPC/Cmd.pm
Not in MANIFEST: t/01_IPC-Cmd.t
Not in MANIFEST: t/02_Interactive.t
Not in MANIFEST: t/src/child.pl
Not in MANIFEST: t/src/output.pl
Not in MANIFEST: t/src/x.tgz
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/IPC-Cmd'
Making IPC::Open2 (distclean)
Making distclean in ext/IPC-Open2
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IPC/Open2/extralibs.all \
core.[0-9][0-9] Open2.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Open2.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IPC/Open2/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Open2.def core.[0-9][0-9][0-9] \
mon.out libOpen2.def \
perlmain.c perl.exe \
so_locations Open2.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IPC/Open2.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/IPC/Open2 ../../lib/auto/IPC/Open2 \
IPC-Open2-1.03 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/IPC/Open2.pm
Not in MANIFEST: t/IPC-Open2.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open2'
Making IPC::Open3 (distclean)
Making distclean in ext/IPC-Open3
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/IPC/Open3/extralibs.all \
core.[0-9][0-9] Open3.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Open3.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/IPC/Open3/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Open3.def core.[0-9][0-9][0-9] \
mon.out libOpen3.def \
perlmain.c perl.exe \
so_locations Open3.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/IPC/Open3.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/IPC/Open3 ../../lib/auto/IPC/Open3 \
IPC-Open3-1.09 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/IPC/Open3.pm
Not in MANIFEST: t/fd.t
Not in MANIFEST: t/IPC-Open3.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/IPC-Open3'
Making JSON::PP (distclean)
Making distclean in cpan/JSON-PP
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/JSON/PP/extralibs.all \
core.[0-9][0-9] PP.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml PP.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/JSON/PP/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
PP.def core.[0-9][0-9][0-9] \
mon.out libPP.def \
perlmain.c perl.exe \
so_locations PP.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/JSON/PP/Boolean.pm ../../lib/JSON/PP.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/JSON/PP ../../lib/auto/JSON/PP \
JSON-PP-2.27105 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bin/json_pp
Not in MANIFEST: lib/JSON/PP.pm
Not in MANIFEST: lib/JSON/PP/Boolean.pm
Not in MANIFEST: t/000_load.t
Not in MANIFEST: t/001_utf8.t
Not in MANIFEST: t/002_error.t
Not in MANIFEST: t/003_types.t
Not in MANIFEST: t/006_pc_pretty.t
Not in MANIFEST: t/007_pc_esc.t
Not in MANIFEST: t/008_pc_base.t
Not in MANIFEST: t/009_pc_extra_number.t
Not in MANIFEST: t/010_pc_keysort.t
Not in MANIFEST: t/011_pc_expo.t
Not in MANIFEST: t/012_blessed.t
Not in MANIFEST: t/013_limit.t
Not in MANIFEST: t/014_latin1.t
Not in MANIFEST: t/015_prefix.t
Not in MANIFEST: t/016_tied.t
Not in MANIFEST: t/017_relaxed.t
Not in MANIFEST: t/018_json_checker.t
Not in MANIFEST: t/019_incr.t
Not in MANIFEST: t/020_unknown.t
Not in MANIFEST: t/021_evans_bugrep.t
Not in MANIFEST: t/022_comment_at_eof.t
Not in MANIFEST: t/099_binary.t
Not in MANIFEST: t/104_sortby.t
Not in MANIFEST: t/105_esc_slash.t
Not in MANIFEST: t/106_allow_barekey.t
Not in MANIFEST: t/107_allow_singlequote.t
Not in MANIFEST: t/108_decode.t
Not in MANIFEST: t/109_encode.t
Not in MANIFEST: t/110_bignum.t
Not in MANIFEST: t/112_upgrade.t
Not in MANIFEST: t/113_overloaded_eq.t
Not in MANIFEST: t/114_decode_prefix.t
Not in MANIFEST: t/115_tie_ixhash.t
Not in MANIFEST: t/_unicode_handling.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/JSON-PP'
Making Locale::Codes (distclean)
Making distclean in cpan/Locale-Codes
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Locale/Codes/extralibs.all \
core.[0-9][0-9] Codes.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Codes.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Locale/Codes/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Codes.def core.[0-9][0-9][0-9] \
mon.out libCodes.def \
perlmain.c perl.exe \
so_locations Codes.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Locale/Language.pod ../../lib/Locale/Codes.pm \
../../lib/Locale/Script.pod ../../lib/Locale/Codes/Script.pm \
Makefile.old ../../lib/Locale/Currency.pod \
../../lib/Locale/Codes/Currency.pm ../../lib/Locale/Currency.pm \
../../lib/Locale/Country.pod ../../lib/Locale/Language.pm \
Makefile ../../lib/Locale/Codes/Country.pm \
../../lib/Locale/Constants.pod ../../lib/Locale/Constants.pm \
../../lib/Locale/Codes.pod ../../lib/Locale/Codes/Changes.pod \
../../lib/Locale/Script.pm ../../lib/Locale/Country.pm \
../../lib/Locale/Codes/Language.pm
rm -rf \
../../lib/auto/Locale/Codes ../../lib/auto/Locale/Codes \
Locale-Codes-3.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: lib/Locale/Codes.pm
Not in MANIFEST: lib/Locale/Codes.pod
Not in MANIFEST: lib/Locale/Codes/Changes.pod
Not in MANIFEST: lib/Locale/Codes/Country.pm
Not in MANIFEST: lib/Locale/Codes/Currency.pm
Not in MANIFEST: lib/Locale/Codes/Language.pm
Not in MANIFEST: lib/Locale/Codes/Script.pm
Not in MANIFEST: lib/Locale/Constants.pm
Not in MANIFEST: lib/Locale/Constants.pod
Not in MANIFEST: lib/Locale/Country.pm
Not in MANIFEST: lib/Locale/Country.pod
Not in MANIFEST: lib/Locale/Currency.pm
Not in MANIFEST: lib/Locale/Currency.pod
Not in MANIFEST: lib/Locale/Language.pm
Not in MANIFEST: lib/Locale/Language.pod
Not in MANIFEST: lib/Locale/Script.pm
Not in MANIFEST: lib/Locale/Script.pod
Not in MANIFEST: LICENSE
Not in MANIFEST: README.first
Not in MANIFEST: t/alias_code.t
Not in MANIFEST: t/code2country.t
Not in MANIFEST: t/code2currency.t
Not in MANIFEST: t/code2language.t
Not in MANIFEST: t/code2script.t
Not in MANIFEST: t/country.t
Not in MANIFEST: t/country2code.t
Not in MANIFEST: t/country_code2code.t
Not in MANIFEST: t/currency2code.t
Not in MANIFEST: t/language.t
Not in MANIFEST: t/language2code.t
Not in MANIFEST: t/script2code.t
Not in MANIFEST: t/testfunc.pl
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Codes'
Making Locale::Maketext (distclean)
Making distclean in dist/Locale-Maketext
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Locale/Maketext/extralibs.all \
core.[0-9][0-9] Maketext.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Maketext.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Locale/Maketext/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Maketext.def core.[0-9][0-9][0-9] \
mon.out libMaketext.def \
perlmain.c perl.exe \
so_locations Maketext.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Locale/Maketext/GutsLoader.pm Makefile.old \
../../lib/Locale/Maketext.pm ../../lib/Locale/Maketext/TPJ13.pod \
../../lib/Locale/Maketext/Cookbook.pod Makefile \
../../lib/Locale/Maketext/Guts.pm ../../lib/Locale/Maketext.pod
rm -rf \
../../lib/auto/Locale/Maketext ../../lib/auto/Locale/Maketext \
Locale-Maketext-1.19 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: lib/Locale/Maketext.pm
Not in MANIFEST: lib/Locale/Maketext.pod
Not in MANIFEST: lib/Locale/Maketext/Cookbook.pod
Not in MANIFEST: lib/Locale/Maketext/Guts.pm
Not in MANIFEST: lib/Locale/Maketext/GutsLoader.pm
Not in MANIFEST: lib/Locale/Maketext/TPJ13.pod
Not in MANIFEST: README
Not in MANIFEST: t/01_about_verbose.t
Not in MANIFEST: t/04_use_external_lex_cache.t
Not in MANIFEST: t/09_compile.t
Not in MANIFEST: t/10_make.t
Not in MANIFEST: t/20_get.t
Not in MANIFEST: t/30_eval_dollar_at.t
Not in MANIFEST: t/40_super.t
Not in MANIFEST: t/50_super.t
Not in MANIFEST: t/60_super.t
Not in MANIFEST: t/70_fail_auto.t
Not in MANIFEST: t/90_utf8.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Locale-Maketext'
Making Locale::Maketext::Simple (distclean)
Making distclean in cpan/Locale-Maketext-Simple
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Locale/Maketext/Simple/extralibs.all \
core.[0-9][0-9] Simple.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Simple.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Locale/Maketext/Simple/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Simple.def core.[0-9][0-9][0-9] \
mon.out libSimple.def \
perlmain.c perl.exe \
so_locations Simple.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Locale/Maketext/Simple.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Locale/Maketext/Simple ../../lib/auto/Locale/Maketext/Simple \
Locale-Maketext-Simple-0.21 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Locale/Maketext/Simple.pm
Not in MANIFEST: t/0-signature.t
Not in MANIFEST: t/1-basic.t
Not in MANIFEST: t/2-load_po_without_i_default.t
Not in MANIFEST: t/3-load_po_with_i_default.t
Not in MANIFEST: t/po_with_i_default/en.po
Not in MANIFEST: t/po_with_i_default/fr.po
Not in MANIFEST: t/po_with_i_default/i_default.po
Not in MANIFEST: t/po_without_i_default/en.po
Not in MANIFEST: t/po_without_i_default/fr.po
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Locale-Maketext-Simple'
Making Log::Message (distclean)
Making distclean in cpan/Log-Message
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Log/Message/extralibs.all \
core.[0-9][0-9] Message.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Message.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Log/Message/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Message.def core.[0-9][0-9][0-9] \
mon.out libMessage.def \
perlmain.c perl.exe \
so_locations Message.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Log/Message/Item.pm ../../lib/Log/Message.pm \
../../lib/Log/Message/Handlers.pm Makefile.old \
Makefile ../../lib/Log/Message/Config.pm
rm -rf \
../../lib/auto/Log/Message ../../lib/auto/Log/Message \
Log-Message-0.04 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Log/Message.pm
Not in MANIFEST: lib/Log/Message/Config.pm
Not in MANIFEST: lib/Log/Message/Handlers.pm
Not in MANIFEST: lib/Log/Message/Item.pm
Not in MANIFEST: t/01_Log-Message-Config.t
Not in MANIFEST: t/02_Log-Message.t
Not in MANIFEST: t/conf/config_file
Not in MANIFEST: t/conf/LoadMe.pl
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message'
Making Log::Message::Simple (distclean)
Making distclean in cpan/Log-Message-Simple
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Log/Message/Simple/extralibs.all \
core.[0-9][0-9] Simple.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Simple.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Log/Message/Simple/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Simple.def core.[0-9][0-9][0-9] \
mon.out libSimple.def \
perlmain.c perl.exe \
so_locations Simple.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Log/Message/Simple.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Log/Message/Simple ../../lib/auto/Log/Message/Simple \
Log-Message-Simple-0.08 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Log/Message/Simple.pm
Not in MANIFEST: t/01_use.t
Not in MANIFEST: t/02_imports.t
Not in MANIFEST: t/03_functions.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Log-Message-Simple'
Making Math::BigInt (distclean)
Making distclean in dist/Math-BigInt
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Math/BigInt/extralibs.all \
core.[0-9][0-9] BigInt.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml BigInt.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Math/BigInt/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
BigInt.def core.[0-9][0-9][0-9] \
mon.out libBigInt.def \
perlmain.c perl.exe \
so_locations BigInt.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Math/BigFloat.pm ../../lib/Math/BigInt.pm \
../../lib/Math/BigInt/Calc.pm ../../lib/Math/BigInt/CalcEmu.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Math/BigInt ../../lib/auto/Math/BigInt \
Math-BigInt-1.994 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Math/BigFloat.pm
Not in MANIFEST: lib/Math/BigInt.pm
Not in MANIFEST: lib/Math/BigInt/Calc.pm
Not in MANIFEST: lib/Math/BigInt/CalcEmu.pm
Not in MANIFEST: t/_e_math.t
Not in MANIFEST: t/alias.inc
Not in MANIFEST: t/bare_mbf.t
Not in MANIFEST: t/bare_mbi.t
Not in MANIFEST: t/bare_mif.t
Not in MANIFEST: t/big_pi_e.t
Not in MANIFEST: t/bigfltpm.inc
Not in MANIFEST: t/bigfltpm.t
Not in MANIFEST: t/bigintc.t
Not in MANIFEST: t/bigintpm.inc
Not in MANIFEST: t/bigintpm.t
Not in MANIFEST: t/bigints.t
Not in MANIFEST: t/biglog.t
Not in MANIFEST: t/bigroot.t
Not in MANIFEST: t/calling.t
Not in MANIFEST: t/config.t
Not in MANIFEST: t/const_mbf.t
Not in MANIFEST: t/constant.t
Not in MANIFEST: t/downgrade.t
Not in MANIFEST: t/inf_nan.t
Not in MANIFEST: t/isa.t
Not in MANIFEST: t/lib_load.t
Not in MANIFEST: t/Math/BigFloat/Subclass.pm
Not in MANIFEST: t/Math/BigInt/BareCalc.pm
Not in MANIFEST: t/Math/BigInt/Scalar.pm
Not in MANIFEST: t/Math/BigInt/Subclass.pm
Not in MANIFEST: t/mbf_ali.t
Not in MANIFEST: t/mbi_ali.t
Not in MANIFEST: t/mbi_rand.t
Not in MANIFEST: t/mbimbf.inc
Not in MANIFEST: t/mbimbf.t
Not in MANIFEST: t/nan_cmp.t
Not in MANIFEST: t/new_overloaded.t
Not in MANIFEST: t/req_mbf0.t
Not in MANIFEST: t/req_mbf1.t
Not in MANIFEST: t/req_mbfa.t
Not in MANIFEST: t/req_mbfi.t
Not in MANIFEST: t/req_mbfn.t
Not in MANIFEST: t/req_mbfw.t
Not in MANIFEST: t/require.t
Not in MANIFEST: t/round.t
Not in MANIFEST: t/sub_ali.t
Not in MANIFEST: t/sub_mbf.t
Not in MANIFEST: t/sub_mbi.t
Not in MANIFEST: t/sub_mif.t
Not in MANIFEST: t/trap.t
Not in MANIFEST: t/upgrade.inc
Not in MANIFEST: t/upgrade.t
Not in MANIFEST: t/upgrade2.t
Not in MANIFEST: t/upgradef.t
Not in MANIFEST: t/use.t
Not in MANIFEST: t/use_lib1.t
Not in MANIFEST: t/use_lib2.t
Not in MANIFEST: t/use_lib3.t
Not in MANIFEST: t/use_lib4.t
Not in MANIFEST: t/use_mbfw.t
Not in MANIFEST: t/with_sub.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigInt'
Making Math::BigRat (distclean)
Making distclean in dist/Math-BigRat
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Math/BigRat/extralibs.all \
core.[0-9][0-9] BigRat.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml BigRat.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Math/BigRat/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
BigRat.def core.[0-9][0-9][0-9] \
mon.out libBigRat.def \
perlmain.c perl.exe \
so_locations BigRat.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Math/BigRat.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Math/BigRat ../../lib/auto/Math/BigRat \
Math-BigRat-0.26_02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Math/BigRat.pm
Not in MANIFEST: t/big_ap.t
Not in MANIFEST: t/bigfltpm.inc
Not in MANIFEST: t/bigfltrt.t
Not in MANIFEST: t/biglog.t
Not in MANIFEST: t/bigrat.t
Not in MANIFEST: t/bigratpm.inc
Not in MANIFEST: t/bigratpm.t
Not in MANIFEST: t/bigratup.t
Not in MANIFEST: t/bigroot.t
Not in MANIFEST: t/bitwise.t
Not in MANIFEST: t/hang.t
Not in MANIFEST: t/Math/BigRat/Test.pm
Not in MANIFEST: t/requirer.t
Not in MANIFEST: t/trap.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Math-BigRat'
Making Math::Complex (distclean)
Making distclean in cpan/Math-Complex
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Math/Complex/extralibs.all \
core.[0-9][0-9] Complex.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Complex.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Math/Complex/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Complex.def core.[0-9][0-9][0-9] \
mon.out libComplex.def \
perlmain.c perl.exe \
so_locations Complex.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Math/Trig.pm ../../lib/Math/Complex.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Math/Complex ../../lib/auto/Math/Complex \
Math-Complex-1.56 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Math/Complex.pm
Not in MANIFEST: lib/Math/Trig.pm
Not in MANIFEST: t/Complex.t
Not in MANIFEST: t/Trig.t
Not in MANIFEST: t/underbar.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Math-Complex'
Making Memoize (distclean)
Making distclean in cpan/Memoize
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Memoize/extralibs.all \
core.[0-9][0-9] Memoize.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Memoize.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Memoize/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Memoize.def core.[0-9][0-9][0-9] \
mon.out libMemoize.def \
perlmain.c perl.exe \
so_locations Memoize.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Memoize/ExpireFile.pm ../../lib/Memoize/Storable.pm \
../../lib/Memoize/ExpireTest.pm ../../lib/Memoize/SDBM_File.pm \
../../lib/Memoize/Expire.pm ../../lib/Memoize/AnyDBM_File.pm \
../../lib/Memoize.pm Makefile.old \
../../lib/Memoize/NDBM_File.pm Makefile
rm -rf \
../../lib/auto/Memoize ../../lib/auto/Memoize \
Memoize-1.02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Memoize.pm
Not in MANIFEST: Memoize/AnyDBM_File.pm
Not in MANIFEST: Memoize/Expire.pm
Not in MANIFEST: Memoize/ExpireFile.pm
Not in MANIFEST: Memoize/ExpireTest.pm
Not in MANIFEST: Memoize/NDBM_File.pm
Not in MANIFEST: Memoize/SDBM_File.pm
Not in MANIFEST: Memoize/Storable.pm
Not in MANIFEST: t/array.t
Not in MANIFEST: t/array_confusion.t
Not in MANIFEST: t/correctness.t
Not in MANIFEST: t/errors.t
Not in MANIFEST: t/expfile.t
Not in MANIFEST: t/expire.t
Not in MANIFEST: t/expmod_n.t
Not in MANIFEST: t/expmod_t.t
Not in MANIFEST: t/flush.t
Not in MANIFEST: t/normalize.t
Not in MANIFEST: t/prototype.t
Not in MANIFEST: t/speed.t
Not in MANIFEST: t/tie.t
Not in MANIFEST: t/tie_gdbm.t
Not in MANIFEST: t/tie_ndbm.t
Not in MANIFEST: t/tie_sdbm.t
Not in MANIFEST: t/tie_storable.t
Not in MANIFEST: t/tiefeatures.t
Not in MANIFEST: t/unmemoize.t
Not in MANIFEST: TODO
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Memoize'
Making Module::Build (distclean)
Making distclean in cpan/Module-Build
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Build/extralibs.all \
core.[0-9][0-9] Build.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Build.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Build/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Build.def core.[0-9][0-9][0-9] \
mon.out libBuild.def \
perlmain.c perl.exe \
so_locations Build.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/inc/latest/private.pm ../../lib/Module/Build/Platform/RiscOS.pm \
../../lib/Module/Build.pm ../../lib/Module/Build/PPMMaker.pm \
../../lib/Module/Build/Authoring.pod Makefile \
../../lib/Module/Build/Platform/Amiga.pm ../../lib/Module/Build/Platform/VOS.pm \
../../lib/Module/Build/Platform/darwin.pm ../../lib/Module/Build/Bundling.pod \
../../lib/Module/Build/Platform/MacOS.pm ../../lib/Module/Build/Compat.pm \
../../lib/Module/Build/Config.pm ../../lib/Module/Build/Cookbook.pm \
../../lib/Module/Build/Platform/EBCDIC.pm ../../lib/Module/Build/Version.pm \
../../lib/Module/Build/YAML.pm ../../lib/Module/Build/Dumper.pm \
../../lib/Module/Build/ModuleInfo.pm Makefile.old \
../../lib/Module/Build/Platform/MPEiX.pm ../../lib/Module/Build/API.pod \
../../lib/Module/Build/Base.pm ../../lib/Module/Build/Platform/Default.pm \
../../lib/Module/Build/Platform/Windows.pm ../../lib/Module/Build/Platform/os2.pm \
../../lib/Module/Build/ConfigData.pm ../../lib/Module/Build/Platform/VMS.pm \
../../lib/inc/latest.pm ../../lib/Module/Build/PodParser.pm \
../../lib/Module/Build/Notes.pm ../../lib/Module/Build/Platform/Unix.pm \
../../lib/Module/Build/Platform/cygwin.pm ../../lib/Module/Build/Platform/aix.pm
rm -rf \
../../lib/auto/Module/Build ../../lib/auto/Module/Build \
Module-Build-0.3800 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: bin/config_data
Not in MANIFEST: Changes
Not in MANIFEST: lib/inc/latest.pm
Not in MANIFEST: lib/inc/latest/private.pm
Not in MANIFEST: lib/Module/Build.pm
Not in MANIFEST: lib/Module/Build/API.pod
Not in MANIFEST: lib/Module/Build/Authoring.pod
Not in MANIFEST: lib/Module/Build/Base.pm
Not in MANIFEST: lib/Module/Build/Bundling.pod
Not in MANIFEST: lib/Module/Build/Compat.pm
Not in MANIFEST: lib/Module/Build/Config.pm
Not in MANIFEST: lib/Module/Build/ConfigData.pm
Not in MANIFEST: lib/Module/Build/Cookbook.pm
Not in MANIFEST: lib/Module/Build/Dumper.pm
Not in MANIFEST: lib/Module/Build/ModuleInfo.pm
Not in MANIFEST: lib/Module/Build/Notes.pm
Not in MANIFEST: lib/Module/Build/Platform/aix.pm
Not in MANIFEST: lib/Module/Build/Platform/Amiga.pm
Not in MANIFEST: lib/Module/Build/Platform/cygwin.pm
Not in MANIFEST: lib/Module/Build/Platform/darwin.pm
Not in MANIFEST: lib/Module/Build/Platform/Default.pm
Not in MANIFEST: lib/Module/Build/Platform/EBCDIC.pm
Not in MANIFEST: lib/Module/Build/Platform/MacOS.pm
Not in MANIFEST: lib/Module/Build/Platform/MPEiX.pm
Not in MANIFEST: lib/Module/Build/Platform/os2.pm
Not in MANIFEST: lib/Module/Build/Platform/RiscOS.pm
Not in MANIFEST: lib/Module/Build/Platform/Unix.pm
Not in MANIFEST: lib/Module/Build/Platform/VMS.pm
Not in MANIFEST: lib/Module/Build/Platform/VOS.pm
Not in MANIFEST: lib/Module/Build/Platform/Windows.pm
Not in MANIFEST: lib/Module/Build/PodParser.pm
Not in MANIFEST: lib/Module/Build/PPMMaker.pm
Not in MANIFEST: lib/Module/Build/Version.pm
Not in MANIFEST: lib/Module/Build/YAML.pm
Not in MANIFEST: t/00-compile.t
Not in MANIFEST: t/actions/installdeps.t
Not in MANIFEST: t/actions/manifest_skip.t
Not in MANIFEST: t/add_property.t
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/bundle_inc.t
Not in MANIFEST: t/bundled/Software/License.pm
Not in MANIFEST: t/bundled/Tie/CPHash.pm
Not in MANIFEST: t/compat.t
Not in MANIFEST: t/compat/exit.t
Not in MANIFEST: t/debug.t
Not in MANIFEST: t/destinations.t
Not in MANIFEST: t/ext.t
Not in MANIFEST: t/extend.t
Not in MANIFEST: t/files.t
Not in MANIFEST: t/help.t
Not in MANIFEST: t/install.t
Not in MANIFEST: t/install_extra_target.t
Not in MANIFEST: t/lib/DistGen.pm
Not in MANIFEST: t/lib/MBTest.pm
Not in MANIFEST: t/lib/Module/Signature.pm
Not in MANIFEST: t/lib/Software/License/VaporWare.pm
Not in MANIFEST: t/manifypods.t
Not in MANIFEST: t/metadata.t
Not in MANIFEST: t/metadata2.t
Not in MANIFEST: t/mymeta.t
Not in MANIFEST: t/new_from_context.t
Not in MANIFEST: t/notes.t
Not in MANIFEST: t/parents.t
Not in MANIFEST: t/perl_mb_opt.t
Not in MANIFEST: t/PL_files.t
Not in MANIFEST: t/pod_parser.t
Not in MANIFEST: t/ppm.t
Not in MANIFEST: t/properties/dist_suffix.t
Not in MANIFEST: t/properties/license.t
Not in MANIFEST: t/properties/module_name.t
Not in MANIFEST: t/properties/needs_compiler.t
Not in MANIFEST: t/properties/release_status.t
Not in MANIFEST: t/properties/requires.t
Not in MANIFEST: t/properties/share_dir.t
Not in MANIFEST: t/README.pod
Not in MANIFEST: t/resume.t
Not in MANIFEST: t/runthrough.t
Not in MANIFEST: t/sample.t
Not in MANIFEST: t/script_dist.t
Not in MANIFEST: t/test_file_exts.t
Not in MANIFEST: t/test_type.t
Not in MANIFEST: t/test_types.t
Not in MANIFEST: t/tilde.t
Not in MANIFEST: t/use_tap_harness.t
Not in MANIFEST: t/versions.t
Not in MANIFEST: t/write_default_maniskip.t
Not in MANIFEST: t/xs.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Build'
Making Module::CoreList (distclean)
Making distclean in dist/Module-CoreList
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
rm -f \
blib/script/corelist
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/CoreList/extralibs.all \
core.[0-9][0-9] CoreList.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml CoreList.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/CoreList/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
CoreList.def core.[0-9][0-9][0-9] \
mon.out libCoreList.def \
perlmain.c perl.exe \
so_locations CoreList.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/CoreList.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/CoreList ../../lib/auto/Module/CoreList \
Module-CoreList-2.49_02
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
No such file: META.yml
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Module-CoreList'
Making Module::Load (distclean)
Making distclean in cpan/Module-Load
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Load/extralibs.all \
core.[0-9][0-9] Load.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Load.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Load/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Load.def core.[0-9][0-9][0-9] \
mon.out libLoad.def \
perlmain.c perl.exe \
so_locations Load.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/Load.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/Load ../../lib/auto/Module/Load \
Module-Load-0.18 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Module/Load.pm
Not in MANIFEST: t/01_Module-Load.t
Not in MANIFEST: t/to_load/config_file
Not in MANIFEST: t/to_load/LoadIt.pm
Not in MANIFEST: t/to_load/LoadMe.pl
Not in MANIFEST: t/to_load/Must/Be/Loaded.pm
Not in MANIFEST: t/to_load/TestModule.pm
Not in MANIFEST: t/to_load/ToBeLoaded
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load'
Making Module::Load::Conditional (distclean)
Making distclean in cpan/Module-Load-Conditional
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Load/Conditional/extralibs.all \
core.[0-9][0-9] Conditional.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Conditional.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Load/Conditional/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Conditional.def core.[0-9][0-9][0-9] \
mon.out libConditional.def \
perlmain.c perl.exe \
so_locations Conditional.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/Load/Conditional.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/Load/Conditional ../../lib/auto/Module/Load/Conditional \
Module-Load-Conditional-0.44 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Module/Load/Conditional.pm
Not in MANIFEST: t/01_Module_Load_Conditional.t
Not in MANIFEST: t/02_Parse_Version.t
Not in MANIFEST: t/to_load/Commented.pm
Not in MANIFEST: t/to_load/InPod.pm
Not in MANIFEST: t/to_load/LoadIt.pm
Not in MANIFEST: t/to_load/LoadMe.pl
Not in MANIFEST: t/to_load/MustBe/Loaded.pm
Not in MANIFEST: t/to_load/ToBeLoaded
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Load-Conditional'
Making Module::Loaded (distclean)
Making distclean in cpan/Module-Loaded
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Loaded/extralibs.all \
core.[0-9][0-9] Loaded.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Loaded.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Loaded/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Loaded.def core.[0-9][0-9][0-9] \
mon.out libLoaded.def \
perlmain.c perl.exe \
so_locations Loaded.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/Loaded.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/Loaded ../../lib/auto/Module/Loaded \
Module-Loaded-0.06 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Module/Loaded.pm
Not in MANIFEST: t/01_Module-Loaded.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Loaded'
Making Module::Metadata (distclean)
Making distclean in cpan/Module-Metadata
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Metadata/extralibs.all \
core.[0-9][0-9] Metadata.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Metadata.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Metadata/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Metadata.def core.[0-9][0-9][0-9] \
mon.out libMetadata.def \
perlmain.c perl.exe \
so_locations Metadata.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/Metadata.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/Metadata ../../lib/auto/Module/Metadata \
Module-Metadata-1.000004 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Module/Metadata.pm
Not in MANIFEST: t/lib/DistGen.pm
Not in MANIFEST: t/lib/MBTest.pm
Not in MANIFEST: t/lib/Tie/CPHash.pm
Not in MANIFEST: t/metadata.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Metadata'
Making Module::Pluggable (distclean)
Making distclean in cpan/Module-Pluggable
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Module/Pluggable/extralibs.all \
core.[0-9][0-9] Pluggable.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Pluggable.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Module/Pluggable/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Pluggable.def core.[0-9][0-9][0-9] \
mon.out libPluggable.def \
perlmain.c perl.exe \
so_locations Pluggable.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Module/Pluggable.pm ../../lib/Devel/InnerPackage.pm \
../../lib/Module/Pluggable/Object.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Module/Pluggable ../../lib/auto/Module/Pluggable \
Module-Pluggable-3.9 /tmp/buildd/perl-5.14.2/cpan/Module-Pluggable/t/lib/EditorJunk/Plugin/#Bar.pm# \
/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable/t/lib/OddTest/Plugin/-Dodgy.pm /tmp/buildd/perl-5.14.2/cpan/Module-Pluggable/t/lib/EditorJunk/Plugin/.#Bar.pm
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Devel/InnerPackage.pm
Not in MANIFEST: lib/Module/Pluggable.pm
Not in MANIFEST: lib/Module/Pluggable/Object.pm
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/01use.t
Not in MANIFEST: t/02alsoworks.t
Not in MANIFEST: t/02works.t
Not in MANIFEST: t/02works_taint.t
Not in MANIFEST: t/03diffname.t
Not in MANIFEST: t/04acmedir.t
Not in MANIFEST: t/04acmedir_single.t
Not in MANIFEST: t/04acmepath.t
Not in MANIFEST: t/04acmepath_single.t
Not in MANIFEST: t/05postpath.t
Not in MANIFEST: t/06multipath.t
Not in MANIFEST: t/07instantiate.t
Not in MANIFEST: t/08nothing.t
Not in MANIFEST: t/09require.t
Not in MANIFEST: t/10innerpack.t
Not in MANIFEST: t/10innerpack_inner.t
Not in MANIFEST: t/10innerpack_noinner.t
Not in MANIFEST: t/10innerpack_onefile.t
Not in MANIFEST: t/10innerpack_override.t
Not in MANIFEST: t/10innerpack_super.t
Not in MANIFEST: t/11usetwice.t
Not in MANIFEST: t/12only.t
Not in MANIFEST: t/12onlyarray.t
Not in MANIFEST: t/12onlyregex.t
Not in MANIFEST: t/12onlyrequire.t
Not in MANIFEST: t/13except.t
Not in MANIFEST: t/13exceptarray.t
Not in MANIFEST: t/13exceptregex.t
Not in MANIFEST: t/14package.t
Not in MANIFEST: t/15topicsafe.t
Not in MANIFEST: t/16different_extension.t
Not in MANIFEST: t/17devel_inner_package.t
Not in MANIFEST: t/18skipped_package.t
Not in MANIFEST: t/19can_ok_clobber.t
Not in MANIFEST: t/20dodgy_files.t
Not in MANIFEST: t/21editor_junk.t
Not in MANIFEST: t/acme/Acme/MyTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/Acme/Foo-Bar.pm
Not in MANIFEST: t/lib/Acme/MyTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/EditorJunk/Plugin/Bar.pm
Not in MANIFEST: t/lib/EditorJunk/Plugin/Bar.pm.swo
Not in MANIFEST: t/lib/EditorJunk/Plugin/Bar.pm.swp
Not in MANIFEST: t/lib/EditorJunk/Plugin/Foo.pm
Not in MANIFEST: t/lib/ExtTest/Plugin/Bar.plugin
Not in MANIFEST: t/lib/ExtTest/Plugin/Foo.plugin
Not in MANIFEST: t/lib/ExtTest/Plugin/Quux/Foo.plugin
Not in MANIFEST: t/lib/InnerTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/MyOtherTest/Plugin/Bar.pm
Not in MANIFEST: t/lib/MyOtherTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/MyOtherTest/Plugin/Quux.pm
Not in MANIFEST: t/lib/MyOtherTest/Plugin/Quux/Foo.pm
Not in MANIFEST: t/lib/MyTest/Extend/Plugin/Bar.pm
Not in MANIFEST: t/lib/MyTest/Plugin/Bar.pm
Not in MANIFEST: t/lib/MyTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/MyTest/Plugin/Quux/Foo.pm
Not in MANIFEST: t/lib/No/Middle.pm
Not in MANIFEST: t/lib/OddTest/Plugin/Foo.pm
Not in MANIFEST: t/lib/TA/C/A/I.pm
Not in MANIFEST: t/lib/Zot/.Zork.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Module-Pluggable'
Making NEXT (distclean)
Making distclean in cpan/NEXT
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/NEXT/extralibs.all \
core.[0-9][0-9] NEXT.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml NEXT.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/NEXT/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
NEXT.def core.[0-9][0-9][0-9] \
mon.out libNEXT.def \
perlmain.c perl.exe \
so_locations NEXT.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/NEXT.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/NEXT ../../lib/auto/NEXT \
NEXT-0.65 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/NEXT.pm
Not in MANIFEST: t/actual.t
Not in MANIFEST: t/actuns.t
Not in MANIFEST: t/dynamically_scoped_regex_vars.t
Not in MANIFEST: t/next.t
Not in MANIFEST: t/stringify.t
Not in MANIFEST: t/unseen.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/NEXT'
Making Net::Ping (distclean)
Making distclean in dist/Net-Ping
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Net/Ping/extralibs.all \
core.[0-9][0-9] Ping.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Ping.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Net/Ping/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Ping.def core.[0-9][0-9][0-9] \
mon.out libPing.def \
perlmain.c perl.exe \
so_locations Ping.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Net/Ping.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Net/Ping ../../lib/auto/Net/Ping \
Net-Ping-2.38 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Net/Ping.pm
Not in MANIFEST: t/100_load.t
Not in MANIFEST: t/110_icmp_inst.t
Not in MANIFEST: t/120_udp_inst.t
Not in MANIFEST: t/130_tcp_inst.t
Not in MANIFEST: t/140_stream_inst.t
Not in MANIFEST: t/150_syn_inst.t
Not in MANIFEST: t/190_alarm.t
Not in MANIFEST: t/200_ping_tcp.t
Not in MANIFEST: t/250_ping_hires.t
Not in MANIFEST: t/300_ping_stream.t
Not in MANIFEST: t/400_ping_syn.t
Not in MANIFEST: t/410_syn_host.t
Not in MANIFEST: t/450_service.t
Not in MANIFEST: t/500_ping_icmp.t
Not in MANIFEST: t/510_ping_udp.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Net-Ping'
Making Object::Accessor (distclean)
Making distclean in cpan/Object-Accessor
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Object/Accessor/extralibs.all \
core.[0-9][0-9] Accessor.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Accessor.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Object/Accessor/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Accessor.def core.[0-9][0-9][0-9] \
mon.out libAccessor.def \
perlmain.c perl.exe \
so_locations Accessor.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Object/Accessor.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Object/Accessor ../../lib/auto/Object/Accessor \
Object-Accessor-0.38 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Object/Accessor.pm
Not in MANIFEST: t/00_Object-Accessor.t
Not in MANIFEST: t/01_Object-Accessor-Subclassed.t
Not in MANIFEST: t/02_Object-Accessor-allow.t
Not in MANIFEST: t/03_Object-Accessor-local.t
Not in MANIFEST: t/04_Object-Accessor-lvalue.t
Not in MANIFEST: t/05_Object-Accessor-callback.t
Not in MANIFEST: t/06_Object-Accessor-alias.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Object-Accessor'
Making Package::Constants (distclean)
Making distclean in cpan/Package-Constants
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Package/Constants/extralibs.all \
core.[0-9][0-9] Constants.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Constants.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Package/Constants/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Constants.def core.[0-9][0-9][0-9] \
mon.out libConstants.def \
perlmain.c perl.exe \
so_locations Constants.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Package/Constants.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Package/Constants ../../lib/auto/Package/Constants \
Package-Constants-0.02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Package/Constants.pm
Not in MANIFEST: t/01_list.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Package-Constants'
Making Params::Check (distclean)
Making distclean in cpan/Params-Check
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Params/Check/extralibs.all \
core.[0-9][0-9] Check.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Check.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Params/Check/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Check.def core.[0-9][0-9][0-9] \
mon.out libCheck.def \
perlmain.c perl.exe \
so_locations Check.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Params/Check.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Params/Check ../../lib/auto/Params/Check \
Params-Check-0.28 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Params/Check.pm
Not in MANIFEST: t/01_Params-Check.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Params-Check'
Making Parse::CPAN::Meta (distclean)
Making distclean in cpan/Parse-CPAN-Meta
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Parse/CPAN/Meta/extralibs.all \
core.[0-9][0-9] Meta.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Meta.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Parse/CPAN/Meta/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Meta.def core.[0-9][0-9][0-9] \
mon.out libMeta.def \
perlmain.c perl.exe \
so_locations Meta.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Parse/CPAN/Meta.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Parse/CPAN/Meta ../../lib/auto/Parse/CPAN/Meta \
Parse-CPAN-Meta-1.4401 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Parse/CPAN/Meta.pm
Not in MANIFEST: t/01_compile.t
Not in MANIFEST: t/02_api.t
Not in MANIFEST: t/03_functions.t
Not in MANIFEST: t/04_export.t
Not in MANIFEST: t/05_errors.t
Not in MANIFEST: t/data/VR-META.json
Not in MANIFEST: t/data/VR-META.yml
Not in MANIFEST: t/lib/Parse/CPAN/Meta/Test.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Parse-CPAN-Meta'
Making Perl::OSType (distclean)
Making distclean in cpan/Perl-OSType
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Perl/OSType/extralibs.all \
core.[0-9][0-9] OSType.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml OSType.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Perl/OSType/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
OSType.def core.[0-9][0-9][0-9] \
mon.out libOSType.def \
perlmain.c perl.exe \
so_locations OSType.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Perl/OSType.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Perl/OSType ../../lib/auto/Perl/OSType \
Perl-OSType-1.002 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Perl/OSType.pm
Not in MANIFEST: t/00-compile.t
Not in MANIFEST: t/OSType.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Perl-OSType'
Making PerlIO::via::QuotedPrint (distclean)
Making distclean in cpan/PerlIO-via-QuotedPrint
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/PerlIO/via/QuotedPrint/extralibs.all \
core.[0-9][0-9] QuotedPrint.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml QuotedPrint.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/PerlIO/via/QuotedPrint/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
QuotedPrint.def core.[0-9][0-9][0-9] \
mon.out libQuotedPrint.def \
perlmain.c perl.exe \
so_locations QuotedPrint.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/PerlIO/via/QuotedPrint.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/PerlIO/via/QuotedPrint ../../lib/auto/PerlIO/via/QuotedPrint \
PerlIO-via-QuotedPrint-0.06 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/PerlIO/via/QuotedPrint.pm
Not in MANIFEST: t/QuotedPrint.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/PerlIO-via-QuotedPrint'
Making Pod::Escapes (distclean)
Making distclean in cpan/Pod-Escapes
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/Escapes/extralibs.all \
core.[0-9][0-9] Escapes.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Escapes.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/Escapes/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Escapes.def core.[0-9][0-9][0-9] \
mon.out libEscapes.def \
perlmain.c perl.exe \
so_locations Escapes.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/Escapes.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Pod/Escapes ../../lib/auto/Pod/Escapes \
Pod-Escapes-1.04 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: lib/Pod/Escapes.pm
Not in MANIFEST: README
Not in MANIFEST: t/01_about_verbose.t
Not in MANIFEST: t/10_main.t
Not in MANIFEST: t/15_name2charnum.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Escapes'
Making Pod::Html (distclean)
Making distclean in ext/Pod-Html
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
rm -f \
blib/script/pod2html
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/Html/extralibs.all \
core.[0-9][0-9] Html.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Html.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/Html/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Html.def core.[0-9][0-9][0-9] \
mon.out libHtml.def \
perlmain.c perl.exe \
so_locations Html.exp
rm -rf \
pod2html blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/Html.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Pod/Html ../../lib/auto/Pod/Html \
Pod-Html-1.11 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Html.pm
Not in MANIFEST: pod2html.PL
Not in MANIFEST: t/htmlescp.pod
Not in MANIFEST: t/htmlescp.t
Not in MANIFEST: t/htmllink.pod
Not in MANIFEST: t/htmllink.t
Not in MANIFEST: t/htmlview.pod
Not in MANIFEST: t/htmlview.t
Not in MANIFEST: t/pod2html-lib.pl
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Pod-Html'
Making Pod::LaTeX (distclean)
Making distclean in cpan/Pod-LaTeX
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
rm -f \
blib/script/pod2latex
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/LaTeX/extralibs.all \
core.[0-9][0-9] LaTeX.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml LaTeX.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/LaTeX/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
LaTeX.def core.[0-9][0-9][0-9] \
mon.out libLaTeX.def \
perlmain.c perl.exe \
so_locations LaTeX.exp
rm -rf \
blib pod2latex
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/LaTeX.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Pod/LaTeX ../../lib/auto/Pod/LaTeX \
Pod-LaTeX-0.59 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Pod/LaTeX.pm
Not in MANIFEST: pod2latex.PL
Not in MANIFEST: t/pod2latex.t
Not in MANIFEST: t/user.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-LaTeX'
Making Pod::Parser (distclean)
Making distclean in cpan/Pod-Parser
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
rm -f \
blib/script/podchecker blib/script/pod2usage \
blib/script/podselect
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/Parser/extralibs.all \
core.[0-9][0-9] Parser.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Parser.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/Parser/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Parser.def core.[0-9][0-9][0-9] \
mon.out libParser.def \
perlmain.c perl.exe \
so_locations Parser.exp
rm -rf \
podchecker pod2usage \
podselect blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/InputObjects.pm ../../lib/Pod/Checker.pm \
Makefile.old ../../lib/Pod/Find.pm \
../../lib/Pod/Usage.pm ../../lib/Pod/ParseUtils.pm \
../../lib/Pod/PlainText.pm Makefile \
../../lib/Pod/Select.pm ../../lib/Pod/Parser.pm
rm -rf \
../../lib/auto/Pod/Parser pod2usage.PL \
../../lib/auto/Pod/Parser podselect.PL \
podchecker.PL Pod-Parser-1.37 \
Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Pod/Checker.pm
Not in MANIFEST: lib/Pod/Find.pm
Not in MANIFEST: lib/Pod/InputObjects.pm
Not in MANIFEST: lib/Pod/Parser.pm
Not in MANIFEST: lib/Pod/ParseUtils.pm
Not in MANIFEST: lib/Pod/PlainText.pm
Not in MANIFEST: lib/Pod/Select.pm
Not in MANIFEST: lib/Pod/Usage.pm
Not in MANIFEST: scripts/pod2usage.PL
Not in MANIFEST: scripts/podchecker.PL
Not in MANIFEST: scripts/podselect.PL
Not in MANIFEST: t/pod/contains_bad_pod.xr
Not in MANIFEST: t/pod/contains_pod.t
Not in MANIFEST: t/pod/contains_pod.xr
Not in MANIFEST: t/pod/emptycmd.t
Not in MANIFEST: t/pod/emptycmd.xr
Not in MANIFEST: t/pod/find.t
Not in MANIFEST: t/pod/for.t
Not in MANIFEST: t/pod/for.xr
Not in MANIFEST: t/pod/headings.t
Not in MANIFEST: t/pod/headings.xr
Not in MANIFEST: t/pod/include.t
Not in MANIFEST: t/pod/include.xr
Not in MANIFEST: t/pod/included.t
Not in MANIFEST: t/pod/included.xr
Not in MANIFEST: t/pod/lref.t
Not in MANIFEST: t/pod/lref.xr
Not in MANIFEST: t/pod/multiline_items.t
Not in MANIFEST: t/pod/multiline_items.xr
Not in MANIFEST: t/pod/nested_items.t
Not in MANIFEST: t/pod/nested_items.xr
Not in MANIFEST: t/pod/nested_seqs.t
Not in MANIFEST: t/pod/nested_seqs.xr
Not in MANIFEST: t/pod/oneline_cmds.t
Not in MANIFEST: t/pod/oneline_cmds.xr
Not in MANIFEST: t/pod/p2u_data.pl
Not in MANIFEST: t/pod/pod2usage.t
Not in MANIFEST: t/pod/pod2usage.xr
Not in MANIFEST: t/pod/pod2usage2.t
Not in MANIFEST: t/pod/podchkenc.t
Not in MANIFEST: t/pod/podchkenc.xr
Not in MANIFEST: t/pod/poderrs.t
Not in MANIFEST: t/pod/poderrs.xr
Not in MANIFEST: t/pod/podselect.t
Not in MANIFEST: t/pod/podselect.xr
Not in MANIFEST: t/pod/special_seqs.t
Not in MANIFEST: t/pod/special_seqs.xr
Not in MANIFEST: t/pod/testcmp.pl
Not in MANIFEST: t/pod/testp2pt.pl
Not in MANIFEST: t/pod/testpchk.pl
Not in MANIFEST: t/pod/testpods/lib/Pod/Stuff.pm
Not in MANIFEST: t/pod/twice.t
Not in MANIFEST: t/pod/usage.pod
Not in MANIFEST: t/pod/usage2.pod
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Parser'
Making Pod::Perldoc (distclean)
Making distclean in dist/Pod-Perldoc
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/Perldoc/extralibs.all \
core.[0-9][0-9] Perldoc.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Perldoc.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/Perldoc/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Perldoc.def core.[0-9][0-9][0-9] \
mon.out libPerldoc.def \
perlmain.c perl.exe \
so_locations Perldoc.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/Perldoc/GetOptsOO.pm ../../lib/Pod/Perldoc/ToText.pm \
../../lib/Pod/Perldoc/ToPod.pm ../../lib/Pod/Perldoc/ToNroff.pm \
../../lib/Pod/Perldoc/ToXml.pm ../../lib/Pod/Perldoc/ToMan.pm \
Makefile.old ../../lib/Pod/Perldoc/ToRtf.pm \
../../lib/Pod/Perldoc/ToTk.pm ../../lib/Pod/Perldoc/ToChecker.pm \
../../lib/Pod/Perldoc.pm Makefile \
../../lib/Pod/Perldoc/BaseTo.pm
rm -rf \
../../lib/auto/Pod/Perldoc ../../lib/auto/Pod/Perldoc \
Pod-Perldoc-3.15_04 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Pod/Perldoc.pm
Not in MANIFEST: lib/Pod/Perldoc/BaseTo.pm
Not in MANIFEST: lib/Pod/Perldoc/GetOptsOO.pm
Not in MANIFEST: lib/Pod/Perldoc/ToChecker.pm
Not in MANIFEST: lib/Pod/Perldoc/ToMan.pm
Not in MANIFEST: lib/Pod/Perldoc/ToNroff.pm
Not in MANIFEST: lib/Pod/Perldoc/ToPod.pm
Not in MANIFEST: lib/Pod/Perldoc/ToRtf.pm
Not in MANIFEST: lib/Pod/Perldoc/ToText.pm
Not in MANIFEST: lib/Pod/Perldoc/ToTk.pm
Not in MANIFEST: lib/Pod/Perldoc/ToXml.pm
Not in MANIFEST: t/01_about_verbose.t
Not in MANIFEST: t/checkerbasic.t
Not in MANIFEST: t/perldocbasic.t
Not in MANIFEST: t/textbasic.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Pod-Perldoc'
Making Pod::Simple (distclean)
Making distclean in cpan/Pod-Simple
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/Simple/extralibs.all \
core.[0-9][0-9] Simple.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Simple.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/Simple/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Simple.def core.[0-9][0-9][0-9] \
mon.out libSimple.def \
perlmain.c perl.exe \
so_locations Simple.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/Simple/PullParserTextToken.pm ../../lib/Pod/Simple/PullParserStartToken.pm \
../../lib/Pod/Simple/Subclassing.pod ../../lib/Pod/Simple.pod \
../../lib/Pod/Simple/SimpleTree.pm ../../lib/Pod/Simple/DumpAsXML.pm \
../../lib/Pod/Simple/Methody.pm ../../lib/Pod/Simple/PullParserEndToken.pm \
Makefile ../../lib/Pod/Simple/Checker.pm \
../../lib/Pod/Simple/DumpAsText.pm ../../lib/Pod/Simple/Text.pm \
../../lib/Pod/Simple/Search.pm ../../lib/Pod/Simple/HTMLBatch.pm \
../../lib/Pod/Simple/Progress.pm ../../lib/Pod/Simple/XHTML.pm \
../../lib/Pod/Simple/HTMLLegacy.pm ../../lib/Pod/Simple/XMLOutStream.pm \
../../lib/Pod/Simple.pm ../../lib/Pod/Simple/Transcode.pm \
../../lib/Pod/Simple/PullParser.pm ../../lib/Pod/Simple/Debug.pm \
Makefile.old ../../lib/Pod/Simple/TranscodeSmart.pm \
../../lib/Pod/Simple/TextContent.pm ../../lib/Pod/Simple/LinkSection.pm \
../../lib/Pod/Simple/BlackBox.pm ../../lib/Pod/Simple/RTF.pm \
../../lib/Pod/Simple/TranscodeDumb.pm ../../lib/Pod/Simple/TiedOutFH.pm \
../../lib/Pod/Simple/PullParserToken.pm ../../lib/Pod/Simple/HTML.pm
rm -rf \
../../lib/auto/Pod/Simple ../../lib/auto/Pod/Simple \
Pod-Simple-3.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ChangeLog
Not in MANIFEST: lib/Pod/Simple.pm
Not in MANIFEST: lib/Pod/Simple.pod
Not in MANIFEST: lib/Pod/Simple/BlackBox.pm
Not in MANIFEST: lib/Pod/Simple/Checker.pm
Not in MANIFEST: lib/Pod/Simple/Debug.pm
Not in MANIFEST: lib/Pod/Simple/DumpAsText.pm
Not in MANIFEST: lib/Pod/Simple/DumpAsXML.pm
Not in MANIFEST: lib/Pod/Simple/HTML.pm
Not in MANIFEST: lib/Pod/Simple/HTMLBatch.pm
Not in MANIFEST: lib/Pod/Simple/HTMLLegacy.pm
Not in MANIFEST: lib/Pod/Simple/LinkSection.pm
Not in MANIFEST: lib/Pod/Simple/Methody.pm
Not in MANIFEST: lib/Pod/Simple/Progress.pm
Not in MANIFEST: lib/Pod/Simple/PullParser.pm
Not in MANIFEST: lib/Pod/Simple/PullParserEndToken.pm
Not in MANIFEST: lib/Pod/Simple/PullParserStartToken.pm
Not in MANIFEST: lib/Pod/Simple/PullParserTextToken.pm
Not in MANIFEST: lib/Pod/Simple/PullParserToken.pm
Not in MANIFEST: lib/Pod/Simple/RTF.pm
Not in MANIFEST: lib/Pod/Simple/Search.pm
Not in MANIFEST: lib/Pod/Simple/SimpleTree.pm
Not in MANIFEST: lib/Pod/Simple/Subclassing.pod
Not in MANIFEST: lib/Pod/Simple/Text.pm
Not in MANIFEST: lib/Pod/Simple/TextContent.pm
Not in MANIFEST: lib/Pod/Simple/TiedOutFH.pm
Not in MANIFEST: lib/Pod/Simple/Transcode.pm
Not in MANIFEST: lib/Pod/Simple/TranscodeDumb.pm
Not in MANIFEST: lib/Pod/Simple/TranscodeSmart.pm
Not in MANIFEST: lib/Pod/Simple/XHTML.pm
Not in MANIFEST: lib/Pod/Simple/XMLOutStream.pm
Not in MANIFEST: README
Not in MANIFEST: t/00about.t
Not in MANIFEST: t/20_skip.t
Not in MANIFEST: t/ac_d.t
Not in MANIFEST: t/accept01.t
Not in MANIFEST: t/accept05.t
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/begin.t
Not in MANIFEST: t/cbacks.t
Not in MANIFEST: t/chunking.t
Not in MANIFEST: t/closeys.t
Not in MANIFEST: t/corpus.t
Not in MANIFEST: t/corpus/2202jp.txt
Not in MANIFEST: t/corpus/2202jp.xml
Not in MANIFEST: t/corpus/2202jpx.txt
Not in MANIFEST: t/corpus/2202jpx.xml
Not in MANIFEST: t/corpus/2202jpy.txt
Not in MANIFEST: t/corpus/2202jpy.xml
Not in MANIFEST: t/corpus/2202jpz.txt
Not in MANIFEST: t/corpus/2202jpz.xml
Not in MANIFEST: t/corpus/8859_7.pod
Not in MANIFEST: t/corpus/8859_7.xml
Not in MANIFEST: t/corpus/cp1256.txt
Not in MANIFEST: t/corpus/cp1256.xml
Not in MANIFEST: t/corpus/fet_cont.txt
Not in MANIFEST: t/corpus/fet_cont.xml
Not in MANIFEST: t/corpus/fet_dup.txt
Not in MANIFEST: t/corpus/fet_dup.xml
Not in MANIFEST: t/corpus/iso6.txt
Not in MANIFEST: t/corpus/iso6.xml
Not in MANIFEST: t/corpus/koi8r.txt
Not in MANIFEST: t/corpus/koi8r.xml
Not in MANIFEST: t/corpus/laozi38.txt
Not in MANIFEST: t/corpus/laozi38.xml
Not in MANIFEST: t/corpus/laozi38b.txt
Not in MANIFEST: t/corpus/laozi38b.xml
Not in MANIFEST: t/corpus/laozi38p.pod
Not in MANIFEST: t/corpus/laozi38p.xml
Not in MANIFEST: t/corpus/lat1fr.txt
Not in MANIFEST: t/corpus/lat1fr.xml
Not in MANIFEST: t/corpus/lat1frim.txt
Not in MANIFEST: t/corpus/lat1frim.xml
Not in MANIFEST: t/corpus/nonesuch.txt
Not in MANIFEST: t/corpus/nonesuch.xml
Not in MANIFEST: t/corpus/pasternak_cp1251.txt
Not in MANIFEST: t/corpus/pasternak_cp1251.xml
Not in MANIFEST: t/corpus/plain.txt
Not in MANIFEST: t/corpus/plain.xml
Not in MANIFEST: t/corpus/plain_explicit.txt
Not in MANIFEST: t/corpus/plain_explicit.xml
Not in MANIFEST: t/corpus/plain_latin1.txt
Not in MANIFEST: t/corpus/plain_latin1.xml
Not in MANIFEST: t/corpus/plain_utf8.txt
Not in MANIFEST: t/corpus/plain_utf8.xml
Not in MANIFEST: t/corpus/polish_utf8.txt
Not in MANIFEST: t/corpus/polish_utf8.xml
Not in MANIFEST: t/corpus/s2763_sjis.txt
Not in MANIFEST: t/corpus/s2763_sjis.xml
Not in MANIFEST: t/corpus/thai_iso11.txt
Not in MANIFEST: t/corpus/thai_iso11.xml
Not in MANIFEST: t/corpus2/fiqhakbar_iso6.txt
Not in MANIFEST: t/corpus2/fiqhakbar_iso6.xml
Not in MANIFEST: t/corpus2/polish_implicit_utf8.txt
Not in MANIFEST: t/corpus2/polish_utf16be_bom.txt
Not in MANIFEST: t/corpus2/polish_utf16le_bom.txt
Not in MANIFEST: t/corpus2/polish_utf8_bom.txt
Not in MANIFEST: t/corpus2/polish_utf8_bom.xml
Not in MANIFEST: t/corpus2/polish_utf8_bom2.txt
Not in MANIFEST: t/corpus2/polish_utf8_bom2.xml
Not in MANIFEST: t/corpus2/README
Not in MANIFEST: t/encod01.t
Not in MANIFEST: t/encod02.t
Not in MANIFEST: t/encod03.t
Not in MANIFEST: t/end_over.t
Not in MANIFEST: t/fcodes.t
Not in MANIFEST: t/fcodes_e.t
Not in MANIFEST: t/fcodes_l.t
Not in MANIFEST: t/fcodes_s.t
Not in MANIFEST: t/for.t
Not in MANIFEST: t/fornot.t
Not in MANIFEST: t/heads.t
Not in MANIFEST: t/html01.t
Not in MANIFEST: t/html02.t
Not in MANIFEST: t/html03.t
Not in MANIFEST: t/htmlbat.t
Not in MANIFEST: t/items.t
Not in MANIFEST: t/items02.t
Not in MANIFEST: t/itemstar.t
Not in MANIFEST: t/junk1.pod
Not in MANIFEST: t/junk1o.txt
Not in MANIFEST: t/junk2.pod
Not in MANIFEST: t/junk2o.txt
Not in MANIFEST: t/linkclas.t
Not in MANIFEST: t/output.t
Not in MANIFEST: t/perlcyg.pod
Not in MANIFEST: t/perlcygo.txt
Not in MANIFEST: t/perlfaq.pod
Not in MANIFEST: t/perlfaqo.txt
Not in MANIFEST: t/perlvar.pod
Not in MANIFEST: t/perlvaro.txt
Not in MANIFEST: t/puller.t
Not in MANIFEST: t/pulltitl.t
Not in MANIFEST: t/reinit.t
Not in MANIFEST: t/render.t
Not in MANIFEST: t/search05.t
Not in MANIFEST: t/search10.t
Not in MANIFEST: t/search12.t
Not in MANIFEST: t/search20.t
Not in MANIFEST: t/search22.t
Not in MANIFEST: t/search25.t
Not in MANIFEST: t/search26.t
Not in MANIFEST: t/search27.t
Not in MANIFEST: t/search28.t
Not in MANIFEST: t/search29.t
Not in MANIFEST: t/search50.t
Not in MANIFEST: t/stree.t
Not in MANIFEST: t/strpvbtm.t
Not in MANIFEST: t/testlib1/Blorm.pm
Not in MANIFEST: t/testlib1/hinkhonk/Glunk.pod
Not in MANIFEST: t/testlib1/hinkhonk/readme.txt
Not in MANIFEST: t/testlib1/hinkhonk/Vliff.pm
Not in MANIFEST: t/testlib1/pod/perlflif.pod
Not in MANIFEST: t/testlib1/pod/perlthng.pod
Not in MANIFEST: t/testlib1/squaa.pm
Not in MANIFEST: t/testlib1/squaa/Glunk.pod
Not in MANIFEST: t/testlib1/squaa/Vliff.pm
Not in MANIFEST: t/testlib1/zikzik.pod
Not in MANIFEST: t/testlib1/Zonk/Fiddle.txt
Not in MANIFEST: t/testlib1/Zonk/Pronk.pm
Not in MANIFEST: t/testlib1/Zonk/Veng.pm
Not in MANIFEST: t/testlib2/hinkhonk/Glunk.pod
Not in MANIFEST: t/testlib2/hinkhonk/readme.txt
Not in MANIFEST: t/testlib2/hinkhonk/Vliff.pm
Not in MANIFEST: t/testlib2/pod/perlthng.pod
Not in MANIFEST: t/testlib2/pod/perlzuk.pod
Not in MANIFEST: t/testlib2/squaa/Vliff.pm
Not in MANIFEST: t/testlib2/squaa/Wowo.pod
Not in MANIFEST: t/testlib2/Suzzle.pm
Not in MANIFEST: t/testlib3/squaa/Vliff.pm
Not in MANIFEST: t/tiedfh.t
Not in MANIFEST: t/verb_fmt.t
Not in MANIFEST: t/verbatim.t
Not in MANIFEST: t/x_nixer.t
Not in MANIFEST: t/xhtml01.t
Not in MANIFEST: t/xhtml05.t
Not in MANIFEST: t/xhtml10.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Pod-Simple'
Making Safe (distclean)
Making distclean in dist/Safe
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Safe'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Safe/extralibs.all \
core.[0-9][0-9] Safe.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Safe.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Safe/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Safe.def core.[0-9][0-9][0-9] \
mon.out libSafe.def \
perlmain.c perl.exe \
so_locations Safe.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Safe.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Safe ../../lib/auto/Safe \
Safe-2.29
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Safe'
Making SelfLoader (distclean)
Making distclean in dist/SelfLoader
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/SelfLoader/extralibs.all \
core.[0-9][0-9] SelfLoader.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml SelfLoader.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/SelfLoader/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
SelfLoader.def core.[0-9][0-9][0-9] \
mon.out libSelfLoader.def \
perlmain.c perl.exe \
so_locations SelfLoader.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/SelfLoader.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/SelfLoader ../../lib/auto/SelfLoader \
SelfLoader-1.18 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/SelfLoader.pm
Not in MANIFEST: t/01SelfLoader.t
Not in MANIFEST: t/02SelfLoader-buggy.t
Not in MANIFEST: t/03taint.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/SelfLoader'
Making Shell (distclean)
Making distclean in cpan/Shell
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Shell/extralibs.all \
core.[0-9][0-9] Shell.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Shell.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Shell/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Shell.def core.[0-9][0-9][0-9] \
mon.out libShell.def \
perlmain.c perl.exe \
so_locations Shell.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Shell.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Shell ../../lib/auto/Shell \
Shell-0.72_01 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Shell.pm
Not in MANIFEST: t/Shell.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Shell'
Making Term::ANSIColor (distclean)
Making distclean in cpan/Term-ANSIColor
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Term/ANSIColor/extralibs.all \
core.[0-9][0-9] ANSIColor.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml ANSIColor.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Term/ANSIColor/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
ANSIColor.def core.[0-9][0-9][0-9] \
mon.out libANSIColor.def \
perlmain.c perl.exe \
so_locations ANSIColor.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Term/ANSIColor.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Term/ANSIColor ../../lib/auto/Term/ANSIColor \
Term-ANSIColor-3.00 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: ANSIColor.pm
Not in MANIFEST: ChangeLog
Not in MANIFEST: README
Not in MANIFEST: t/basic.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-ANSIColor'
Making Term::Cap (distclean)
Making distclean in cpan/Term-Cap
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Term/Cap/extralibs.all \
core.[0-9][0-9] Cap.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Cap.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Term/Cap/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Cap.def core.[0-9][0-9][0-9] \
mon.out libCap.def \
perlmain.c perl.exe \
so_locations Cap.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Term/Cap.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Term/Cap ../../lib/auto/Term/Cap \
Term-Cap-1.12 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Cap.pm
Not in MANIFEST: test.pl
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-Cap'
Making Term::UI (distclean)
Making distclean in cpan/Term-UI
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Term/UI/extralibs.all \
core.[0-9][0-9] UI.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml UI.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Term/UI/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
UI.def core.[0-9][0-9][0-9] \
mon.out libUI.def \
perlmain.c perl.exe \
so_locations UI.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Term/UI/History.pm ../../lib/Term/UI.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Term/UI ../../lib/auto/Term/UI \
Term-UI-0.26 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Term/UI.pm
Not in MANIFEST: lib/Term/UI/History.pm
Not in MANIFEST: t/00_load.t
Not in MANIFEST: t/01_history.t
Not in MANIFEST: t/02_ui.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Term-UI'
Making Test (distclean)
Making distclean in cpan/Test
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Test/extralibs.all \
core.[0-9][0-9] Test.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Test.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Test/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Test.def core.[0-9][0-9][0-9] \
mon.out libTest.def \
perlmain.c perl.exe \
so_locations Test.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Test.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Test ../../lib/auto/Test \
Test-1.25_02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Test.pm
Not in MANIFEST: t/05_about_verbose.t
Not in MANIFEST: t/fail.t
Not in MANIFEST: t/mix.t
Not in MANIFEST: t/multiline.t
Not in MANIFEST: t/onfail.t
Not in MANIFEST: t/qr.t
Not in MANIFEST: t/skip.t
Not in MANIFEST: t/success.t
Not in MANIFEST: t/todo.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test'
Making Test::Harness (distclean)
Making distclean in cpan/Test-Harness
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Test/Harness/extralibs.all \
core.[0-9][0-9] Harness.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Harness.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Test/Harness/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Harness.def core.[0-9][0-9][0-9] \
mon.out libHarness.def \
perlmain.c perl.exe \
so_locations Harness.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/TAP/Parser/Result/Comment.pm ../../lib/TAP/Parser/Result/Test.pm \
../../lib/TAP/Parser.pm ../../lib/TAP/Parser/Result/Version.pm \
../../lib/Test/Harness.pm ../../lib/TAP/Parser/SourceHandler/Executable.pm \
../../lib/TAP/Parser/IteratorFactory.pm ../../lib/TAP/Parser/Iterator/Array.pm \
../../lib/TAP/Parser/Scheduler/Spinner.pm ../../lib/TAP/Parser/Scheduler/Job.pm \
../../lib/TAP/Formatter/Session.pm ../../lib/TAP/Parser/Iterator/Stream.pm \
../../lib/TAP/Parser/YAMLish/Reader.pm ../../lib/TAP/Parser/Source.pm \
Makefile ../../lib/TAP/Formatter/Console/ParallelSession.pm \
../../lib/TAP/Parser/Grammar.pm ../../lib/TAP/Parser/SourceHandler/Perl.pm \
../../lib/TAP/Parser/Iterator/Process.pm ../../lib/TAP/Parser/SourceHandler/Handle.pm \
../../lib/TAP/Formatter/Console/Session.pm ../../lib/TAP/Parser/Result/YAML.pm \
../../lib/TAP/Parser/Result/Bailout.pm ../../lib/TAP/Parser/ResultFactory.pm \
../../lib/TAP/Parser/Utils.pm ../../lib/TAP/Parser/Aggregator.pm \
../../lib/TAP/Base.pm ../../lib/TAP/Parser/YAMLish/Writer.pm \
Makefile.old ../../lib/TAP/Harness.pm \
../../lib/TAP/Harness/Beyond.pod ../../lib/TAP/Parser/Multiplexer.pm \
../../lib/TAP/Parser/Result/Unknown.pm ../../lib/TAP/Parser/SourceHandler/File.pm \
../../lib/TAP/Parser/Iterator.pm ../../lib/App/Prove/State/Result.pm \
../../lib/TAP/Formatter/File/Session.pm ../../lib/TAP/Parser/Result/Pragma.pm \
../../lib/App/Prove.pm ../../lib/TAP/Formatter/Base.pm \
../../lib/TAP/Parser/Scheduler.pm ../../lib/App/Prove/State/Result/Test.pm \
../../lib/TAP/Formatter/Color.pm ../../lib/TAP/Parser/Result.pm \
../../lib/TAP/Formatter/Console.pm ../../lib/TAP/Formatter/File.pm \
../../lib/TAP/Parser/SourceHandler/RawTAP.pm ../../lib/TAP/Parser/SourceHandler.pm \
../../lib/App/Prove/State.pm ../../lib/TAP/Parser/Result/Plan.pm \
../../lib/TAP/Object.pm
rm -rf \
../../lib/auto/Test/Harness ../../lib/auto/Test/Harness \
Test-Harness-3.23 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
No such file: Changes-2.64
No such file: examples/analyze_tests.pl
No such file: examples/bin/forked_tests.pl
No such file: examples/bin/test_html.pl
No such file: examples/bin/tprove_gtk
No such file: examples/harness-hook/hook.pl
No such file: examples/harness-hook/lib/Harness/Hook.pm
No such file: examples/my_exec
No such file: examples/README
No such file: examples/silent-harness.pl
No such file: examples/t/10-stuff.t
No such file: examples/t/ruby.t
No such file: examples/test_urls.txt
No such file: HACKING.pod
No such file: inc/MyBuilder.pm
No such file: Makefile.PL
No such file: META.yml
No such file: NotBuild.PL
No such file: perlcriticrc
No such file: README
No such file: t/lib/if.pm
No such file: t/lib/Test/Builder.pm
No such file: t/lib/Test/Builder/Module.pm
No such file: t/lib/Test/More.pm
No such file: t/lib/Test/Simple.pm
No such file: xt/author/pod-coverage.t
No such file: xt/author/pod.t
No such file: xt/author/stdin.t
No such file: xt/perls/harness_perl.t
No such file: xt/perls/sample-tests/perl_version
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Harness'
Making Test::Simple (distclean)
Making distclean in cpan/Test-Simple
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Test/Simple/extralibs.all \
core.[0-9][0-9] Simple.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Simple.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Test/Simple/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Simple.def core.[0-9][0-9][0-9] \
mon.out libSimple.def \
perlmain.c perl.exe \
so_locations Simple.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Test/Builder/Tester/Color.pm ../../lib/Test/Builder/Tester.pm \
../../lib/Test/More.pm ../../lib/Test/Builder.pm \
Makefile.old ../../lib/Test/Simple.pm \
../../lib/Test/Tutorial.pod Makefile \
../../lib/Test/Builder/Module.pm
rm -rf \
../../lib/auto/Test/Simple ../../lib/auto/Test/Simple \
Test-Simple-0.98 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: examples/indent.pl
Not in MANIFEST: examples/subtest.t
Not in MANIFEST: lib/Test/Builder.pm
Not in MANIFEST: lib/Test/Builder/Module.pm
Not in MANIFEST: lib/Test/Builder/Tester.pm
Not in MANIFEST: lib/Test/Builder/Tester/Color.pm
Not in MANIFEST: lib/Test/More.pm
Not in MANIFEST: lib/Test/Simple.pm
Not in MANIFEST: lib/Test/Tutorial.pod
Not in MANIFEST: README
Not in MANIFEST: t/00test_harness_check.t
Not in MANIFEST: t/bad_plan.t
Not in MANIFEST: t/bail_out.t
Not in MANIFEST: t/BEGIN_require_ok.t
Not in MANIFEST: t/BEGIN_use_ok.t
Not in MANIFEST: t/buffer.t
Not in MANIFEST: t/Builder/Builder.t
Not in MANIFEST: t/Builder/carp.t
Not in MANIFEST: t/Builder/create.t
Not in MANIFEST: t/Builder/current_test.t
Not in MANIFEST: t/Builder/current_test_without_plan.t
Not in MANIFEST: t/Builder/details.t
Not in MANIFEST: t/Builder/done_testing.t
Not in MANIFEST: t/Builder/done_testing_double.t
Not in MANIFEST: t/Builder/done_testing_plan_mismatch.t
Not in MANIFEST: t/Builder/done_testing_with_no_plan.t
Not in MANIFEST: t/Builder/done_testing_with_number.t
Not in MANIFEST: t/Builder/done_testing_with_plan.t
Not in MANIFEST: t/Builder/fork_with_new_stdout.t
Not in MANIFEST: t/Builder/has_plan.t
Not in MANIFEST: t/Builder/has_plan2.t
Not in MANIFEST: t/Builder/is_fh.t
Not in MANIFEST: t/Builder/is_passing.t
Not in MANIFEST: t/Builder/maybe_regex.t
Not in MANIFEST: t/Builder/no_diag.t
Not in MANIFEST: t/Builder/no_ending.t
Not in MANIFEST: t/Builder/no_header.t
Not in MANIFEST: t/Builder/no_plan_at_all.t
Not in MANIFEST: t/Builder/ok_obj.t
Not in MANIFEST: t/Builder/output.t
Not in MANIFEST: t/Builder/reset.t
Not in MANIFEST: t/Builder/try.t
Not in MANIFEST: t/c_flag.t
Not in MANIFEST: t/circular_data.t
Not in MANIFEST: t/cmp_ok.t
Not in MANIFEST: t/dependents.t
Not in MANIFEST: t/diag.t
Not in MANIFEST: t/died.t
Not in MANIFEST: t/dont_overwrite_die_handler.t
Not in MANIFEST: t/eq_set.t
Not in MANIFEST: t/exit.t
Not in MANIFEST: t/explain.t
Not in MANIFEST: t/extra.t
Not in MANIFEST: t/extra_one.t
Not in MANIFEST: t/fail-like.t
Not in MANIFEST: t/fail-more.t
Not in MANIFEST: t/fail.t
Not in MANIFEST: t/fail_one.t
Not in MANIFEST: t/filehandles.t
Not in MANIFEST: t/fork.t
Not in MANIFEST: t/harness_active.t
Not in MANIFEST: t/import.t
Not in MANIFEST: t/is_deeply_dne_bug.t
Not in MANIFEST: t/is_deeply_fail.t
Not in MANIFEST: t/is_deeply_with_threads.t
Not in MANIFEST: t/lib/Dev/Null.pm
Not in MANIFEST: t/lib/Dummy.pm
Not in MANIFEST: t/lib/MyOverload.pm
Not in MANIFEST: t/lib/NoExporter.pm
Not in MANIFEST: t/lib/SigDie.pm
Not in MANIFEST: t/lib/Test/Builder/NoOutput.pm
Not in MANIFEST: t/lib/Test/Simple/Catch.pm
Not in MANIFEST: t/lib/Test/Simple/sample_tests/death.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/death_in_eval.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/death_with_handler.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/exit.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/extras.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/five_fail.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/last_minute_death.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/one_fail.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/pre_plan_death.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/require.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/success.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/too_few.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/too_few_fail.plx
Not in MANIFEST: t/lib/Test/Simple/sample_tests/two_fail.plx
Not in MANIFEST: t/lib/TieOut.pm
Not in MANIFEST: t/missing.t
Not in MANIFEST: t/More.t
Not in MANIFEST: t/new_ok.t
Not in MANIFEST: t/no_plan.t
Not in MANIFEST: t/no_tests.t
Not in MANIFEST: t/note.t
Not in MANIFEST: t/overload.t
Not in MANIFEST: t/overload_threads.t
Not in MANIFEST: t/plan.t
Not in MANIFEST: t/plan_bad.t
Not in MANIFEST: t/plan_is_noplan.t
Not in MANIFEST: t/plan_no_plan.t
Not in MANIFEST: t/plan_shouldnt_import.t
Not in MANIFEST: t/plan_skip_all.t
Not in MANIFEST: t/require_ok.t
Not in MANIFEST: t/simple.t
Not in MANIFEST: t/Simple/load.t
Not in MANIFEST: t/skip.t
Not in MANIFEST: t/skipall.t
Not in MANIFEST: t/subtest/args.t
Not in MANIFEST: t/subtest/basic.t
Not in MANIFEST: t/subtest/die.t
Not in MANIFEST: t/subtest/do.t
Not in MANIFEST: t/subtest/exceptions.t
Not in MANIFEST: t/subtest/for_do_t.test
Not in MANIFEST: t/subtest/fork.t
Not in MANIFEST: t/subtest/implicit_done.t
Not in MANIFEST: t/subtest/line_numbers.t
Not in MANIFEST: t/subtest/plan.t
Not in MANIFEST: t/subtest/predicate.t
Not in MANIFEST: t/subtest/singleton.t
Not in MANIFEST: t/subtest/todo.t
Not in MANIFEST: t/subtest/wstat.t
Not in MANIFEST: t/tbm_doesnt_set_exported_to.t
Not in MANIFEST: t/Tester/tbt_01basic.t
Not in MANIFEST: t/Tester/tbt_02fhrestore.t
Not in MANIFEST: t/Tester/tbt_03die.t
Not in MANIFEST: t/Tester/tbt_04line_num.t
Not in MANIFEST: t/Tester/tbt_05faildiag.t
Not in MANIFEST: t/Tester/tbt_06errormess.t
Not in MANIFEST: t/Tester/tbt_07args.t
Not in MANIFEST: t/thread_taint.t
Not in MANIFEST: t/threads.t
Not in MANIFEST: t/todo.t
Not in MANIFEST: t/undef.t
Not in MANIFEST: t/use_ok.t
Not in MANIFEST: t/useing.t
Not in MANIFEST: t/utf8.t
Not in MANIFEST: t/versions.t
Not in MANIFEST: TODO
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Test-Simple'
Making Text::Balanced (distclean)
Making distclean in cpan/Text-Balanced
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Text/Balanced/extralibs.all \
core.[0-9][0-9] Balanced.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Balanced.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Text/Balanced/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Balanced.def core.[0-9][0-9][0-9] \
mon.out libBalanced.def \
perlmain.c perl.exe \
so_locations Balanced.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Text/Balanced.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Text/Balanced ../../lib/auto/Text/Balanced \
Text-Balanced-2.02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Text/Balanced.pm
Not in MANIFEST: README
Not in MANIFEST: t/01_compile.t
Not in MANIFEST: t/02_extbrk.t
Not in MANIFEST: t/03_extcbk.t
Not in MANIFEST: t/04_extdel.t
Not in MANIFEST: t/05_extmul.t
Not in MANIFEST: t/06_extqlk.t
Not in MANIFEST: t/07_exttag.t
Not in MANIFEST: t/08_extvar.t
Not in MANIFEST: t/09_gentag.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Balanced'
Making Text::ParseWords (distclean)
Making distclean in cpan/Text-ParseWords
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Text/ParseWords/extralibs.all \
core.[0-9][0-9] ParseWords.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml ParseWords.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Text/ParseWords/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
ParseWords.def core.[0-9][0-9][0-9] \
mon.out libParseWords.def \
perlmain.c perl.exe \
so_locations ParseWords.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Makefile.old Makefile \
../../lib/Text/ParseWords.pm
rm -rf \
../../lib/auto/Text/ParseWords ../../lib/auto/Text/ParseWords \
Text-ParseWords-3.27 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Text/ParseWords.pm
Not in MANIFEST: t/ParseWords.t
Not in MANIFEST: t/taint.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-ParseWords'
Making Text::Tabs (distclean)
Making distclean in cpan/Text-Tabs
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Text/Tabs/extralibs.all \
core.[0-9][0-9] Tabs.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Tabs.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Text/Tabs/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Tabs.def core.[0-9][0-9][0-9] \
mon.out libTabs.def \
perlmain.c perl.exe \
so_locations Tabs.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Text/Wrap.pm ../../lib/Text/Tabs.pm \
Makefile.old Makefile
rm -rf \
../../lib/auto/Text/Tabs ../../lib/auto/Text/Tabs \
Text-Tabs-2009.0305 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: CHANGELOG
Not in MANIFEST: lib/Text/Tabs.pm
Not in MANIFEST: lib/Text/Wrap.pm
Not in MANIFEST: t/37000.t
Not in MANIFEST: t/39548.t
Not in MANIFEST: t/belg4mit.t
Not in MANIFEST: t/dandv.t
Not in MANIFEST: t/fill.t
Not in MANIFEST: t/Jacobson.t
Not in MANIFEST: t/Jacobson2.t
Not in MANIFEST: t/Jochen.t
Not in MANIFEST: t/sep.t
Not in MANIFEST: t/sep2.t
Not in MANIFEST: t/tabs.t
Not in MANIFEST: t/wrap.t
Not in MANIFEST: t/wrap_separator2.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Text-Tabs'
Making Thread::Queue (distclean)
Making distclean in dist/Thread-Queue
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Thread/Queue/extralibs.all \
core.[0-9][0-9] Queue.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Queue.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Thread/Queue/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Queue.def core.[0-9][0-9][0-9] \
mon.out libQueue.def \
perlmain.c perl.exe \
so_locations Queue.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Thread/Queue.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Thread/Queue ../../lib/auto/Thread/Queue \
Thread-Queue-2.12 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Thread/Queue.pm
Not in MANIFEST: t/01_basic.t
Not in MANIFEST: t/02_refs.t
Not in MANIFEST: t/03_peek.t
Not in MANIFEST: t/04_errs.t
Not in MANIFEST: t/05_extract.t
Not in MANIFEST: t/06_insert.t
Not in MANIFEST: t/07_lock.t
Not in MANIFEST: t/08_nothreads.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Queue'
Making Thread::Semaphore (distclean)
Making distclean in dist/Thread-Semaphore
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Thread/Semaphore/extralibs.all \
core.[0-9][0-9] Semaphore.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Semaphore.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Thread/Semaphore/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Semaphore.def core.[0-9][0-9][0-9] \
mon.out libSemaphore.def \
perlmain.c perl.exe \
so_locations Semaphore.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Thread/Semaphore.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Thread/Semaphore ../../lib/auto/Thread/Semaphore \
Thread-Semaphore-2.12 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Thread/Semaphore.pm
Not in MANIFEST: t/01_basic.t
Not in MANIFEST: t/02_errs.t
Not in MANIFEST: t/03_nothreads.t
Not in MANIFEST: t/04_nonblocking.t
Not in MANIFEST: t/05_force.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/Thread-Semaphore'
Making Tie::File (distclean)
Making distclean in cpan/Tie-File
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Tie/File/extralibs.all \
core.[0-9][0-9] File.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml File.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Tie/File/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
File.def core.[0-9][0-9][0-9] \
mon.out libFile.def \
perlmain.c perl.exe \
so_locations File.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Tie/File.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Tie/File ../../lib/auto/Tie/File \
Tie-File-0.97_02 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Tie/File.pm
Not in MANIFEST: t/00_version.t
Not in MANIFEST: t/01_gen.t
Not in MANIFEST: t/02_fetchsize.t
Not in MANIFEST: t/03_longfetch.t
Not in MANIFEST: t/04_splice.t
Not in MANIFEST: t/05_size.t
Not in MANIFEST: t/06_fixrec.t
Not in MANIFEST: t/07_rv_splice.t
Not in MANIFEST: t/08_ro.t
Not in MANIFEST: t/09_gen_rs.t
Not in MANIFEST: t/10_splice_rs.t
Not in MANIFEST: t/11_rv_splice_rs.t
Not in MANIFEST: t/12_longfetch_rs.t
Not in MANIFEST: t/13_size_rs.t
Not in MANIFEST: t/14_lock.t
Not in MANIFEST: t/15_pushpop.t
Not in MANIFEST: t/16_handle.t
Not in MANIFEST: t/17_misc_meth.t
Not in MANIFEST: t/18_rs_fixrec.t
Not in MANIFEST: t/19_cache.t
Not in MANIFEST: t/20_cache_full.t
Not in MANIFEST: t/21_win32.t
Not in MANIFEST: t/22_autochomp.t
Not in MANIFEST: t/23_rv_ac_splice.t
Not in MANIFEST: t/24_cache_loop.t
Not in MANIFEST: t/25_gen_nocache.t
Not in MANIFEST: t/26_twrite.t
Not in MANIFEST: t/27_iwrite.t
Not in MANIFEST: t/28_mtwrite.t
Not in MANIFEST: t/29_downcopy.t
Not in MANIFEST: t/29a_upcopy.t
Not in MANIFEST: t/30_defer.t
Not in MANIFEST: t/31_autodefer.t
Not in MANIFEST: t/32_defer_misc.t
Not in MANIFEST: t/33_defer_vs.t
Not in MANIFEST: t/40_abs_cache.t
Not in MANIFEST: t/41_heap.t
Not in MANIFEST: t/42_offset.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-File'
Making Tie::Memoize (distclean)
Making distclean in ext/Tie-Memoize
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Tie/Memoize/extralibs.all \
core.[0-9][0-9] Memoize.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Memoize.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Tie/Memoize/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Memoize.def core.[0-9][0-9][0-9] \
mon.out libMemoize.def \
perlmain.c perl.exe \
so_locations Memoize.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
Makefile.old Makefile \
../../lib/Tie/Memoize.pm
rm -rf \
../../lib/auto/Tie/Memoize ../../lib/auto/Tie/Memoize \
Tie-Memoize-1.1 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Tie/Memoize.pm
Not in MANIFEST: t/Tie-Memoize.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/ext/Tie-Memoize'
Making Tie::RefHash (distclean)
Making distclean in cpan/Tie-RefHash
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Tie/RefHash/extralibs.all \
core.[0-9][0-9] RefHash.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml RefHash.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Tie/RefHash/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
RefHash.def core.[0-9][0-9][0-9] \
mon.out libRefHash.def \
perlmain.c perl.exe \
so_locations RefHash.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Tie/RefHash.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Tie/RefHash ../../lib/auto/Tie/RefHash \
Tie-RefHash-1.39 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Tie/RefHash.pm
Not in MANIFEST: t/rebless.t
Not in MANIFEST: t/refhash.t
Not in MANIFEST: t/storable.t
Not in MANIFEST: t/threaded.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Tie-RefHash'
Making Time::Local (distclean)
Making distclean in cpan/Time-Local
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Time/Local/extralibs.all \
core.[0-9][0-9] Local.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Local.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Time/Local/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Local.def core.[0-9][0-9][0-9] \
mon.out libLocal.def \
perlmain.c perl.exe \
so_locations Local.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Time/Local.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Time/Local ../../lib/auto/Time/Local \
Time-Local-1.2000 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Time/Local.pm
Not in MANIFEST: t/Local.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Time-Local'
Making Version::Requirements (distclean)
Making distclean in cpan/Version-Requirements
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Version/Requirements/extralibs.all \
core.[0-9][0-9] Requirements.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Requirements.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Version/Requirements/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Requirements.def core.[0-9][0-9][0-9] \
mon.out libRequirements.def \
perlmain.c perl.exe \
so_locations Requirements.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Version/Requirements.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/Version/Requirements ../../lib/auto/Version/Requirements \
Version-Requirements-0.101020 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/Version/Requirements.pm
Not in MANIFEST: t/accepts.t
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/finalize.t
Not in MANIFEST: t/from-hash.t
Not in MANIFEST: t/merge.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/Version-Requirements'
Making XSLoader (distclean)
Making distclean in dist/XSLoader
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/XSLoader/extralibs.all \
core.[0-9][0-9] XSLoader.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml XSLoader.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/XSLoader/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
XSLoader.def core.[0-9][0-9][0-9] \
mon.out libXSLoader.def \
perlmain.c perl.exe \
so_locations XSLoader.exp
rm -rf \
XSLoader.pm XSLoader-* \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/XSLoader.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/XSLoader ../../lib/auto/XSLoader \
XSLoader-0.13
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/XSLoader.t
Not in MANIFEST: XSLoader_pm.PL
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/XSLoader'
Making autodie (distclean)
Making distclean in cpan/autodie
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/autodie/extralibs.all \
core.[0-9][0-9] autodie.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml autodie.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/autodie/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
autodie.def core.[0-9][0-9][0-9] \
mon.out libautodie.def \
perlmain.c perl.exe \
so_locations autodie.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/autodie.pm ../../lib/autodie/exception.pm \
../../lib/Fatal.pm ../../lib/autodie/exception/system.pm \
../../lib/autodie/hints.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/autodie ../../lib/auto/autodie \
autodie-2.1001 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/autodie.pm
Not in MANIFEST: lib/autodie/exception.pm
Not in MANIFEST: lib/autodie/exception/system.pm
Not in MANIFEST: lib/autodie/hints.pm
Not in MANIFEST: lib/Fatal.pm
Not in MANIFEST: t/00-load.t
Not in MANIFEST: t/autodie.t
Not in MANIFEST: t/autodie_test_module.pm
Not in MANIFEST: t/backcompat.t
Not in MANIFEST: t/basic_exceptions.t
Not in MANIFEST: t/binmode.t
Not in MANIFEST: t/blog_hints.t
Not in MANIFEST: t/caller.t
Not in MANIFEST: t/context.t
Not in MANIFEST: t/context_lexical.t
Not in MANIFEST: t/crickey.t
Not in MANIFEST: t/dbmopen.t
Not in MANIFEST: t/eval_error.t
Not in MANIFEST: t/exception_class.t
Not in MANIFEST: t/exceptions.t
Not in MANIFEST: t/exec.t
Not in MANIFEST: t/Fatal.t
Not in MANIFEST: t/filehandles.t
Not in MANIFEST: t/fileno.t
Not in MANIFEST: t/flock.t
Not in MANIFEST: t/format-clobber.t
Not in MANIFEST: t/hints.t
Not in MANIFEST: t/hints_insist.t
Not in MANIFEST: t/hints_pod_examples.t
Not in MANIFEST: t/hints_provider_does.t
Not in MANIFEST: t/hints_provider_easy_does_it.t
Not in MANIFEST: t/hints_provider_isa.t
Not in MANIFEST: t/internal-backcompat.t
Not in MANIFEST: t/internal.t
Not in MANIFEST: t/lethal.t
Not in MANIFEST: t/lib/autodie/test/au.pm
Not in MANIFEST: t/lib/autodie/test/au/exception.pm
Not in MANIFEST: t/lib/autodie/test/badname.pm
Not in MANIFEST: t/lib/autodie/test/missing.pm
Not in MANIFEST: t/lib/Caller_helper.pm
Not in MANIFEST: t/lib/Hints_pod_examples.pm
Not in MANIFEST: t/lib/Hints_provider_does.pm
Not in MANIFEST: t/lib/Hints_provider_easy_does_it.pm
Not in MANIFEST: t/lib/Hints_provider_isa.pm
Not in MANIFEST: t/lib/Hints_test.pm
Not in MANIFEST: t/lib/lethal.pm
Not in MANIFEST: t/lib/my/autodie.pm
Not in MANIFEST: t/lib/OtherTypes.pm
Not in MANIFEST: t/lib/pujHa/ghach.pm
Not in MANIFEST: t/lib/pujHa/ghach/Dotlh.pm
Not in MANIFEST: t/lib/Some/Module.pm
Not in MANIFEST: t/mkdir.t
Not in MANIFEST: t/open.t
Not in MANIFEST: t/recv.t
Not in MANIFEST: t/repeat.t
Not in MANIFEST: t/scope_leak.t
Not in MANIFEST: t/string-eval-basic.t
Not in MANIFEST: t/string-eval-leak.t
Not in MANIFEST: t/sysopen.t
Not in MANIFEST: t/truncate.t
Not in MANIFEST: t/unlink.t
Not in MANIFEST: t/user-context.t
Not in MANIFEST: t/usersub.t
Not in MANIFEST: t/version.t
Not in MANIFEST: t/version_tag.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/autodie'
Making autouse (distclean)
Making distclean in dist/autouse
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/autouse'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/autouse/extralibs.all \
core.[0-9][0-9] autouse.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml autouse.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/autouse/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
autouse.def core.[0-9][0-9][0-9] \
mon.out libautouse.def \
perlmain.c perl.exe \
so_locations autouse.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/autouse.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/autouse ../../lib/auto/autouse \
autouse-1.06 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/autouse.pm
Not in MANIFEST: t/autouse.t
Not in MANIFEST: t/lib/MyTestModule.pm
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/autouse'
Making base (distclean)
Making distclean in dist/base
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/base'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/base/extralibs.all \
core.[0-9][0-9] base.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml base.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/base/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
base.def core.[0-9][0-9][0-9] \
mon.out libbase.def \
perlmain.c perl.exe \
so_locations base.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/fields.pm Makefile.old \
Makefile ../../lib/base.pm
rm -rf \
../../lib/auto/base ../../lib/auto/base \
base-2.16 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
No such file: Makefile.PL
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/base'
Making bignum (distclean)
Making distclean in dist/bignum
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/bignum'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/bignum/extralibs.all \
core.[0-9][0-9] bignum.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml bignum.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/bignum/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
bignum.def core.[0-9][0-9][0-9] \
mon.out libbignum.def \
perlmain.c perl.exe \
so_locations bignum.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/bigrat.pm ../../lib/Math/BigInt/Trace.pm \
../../lib/Math/BigFloat/Trace.pm ../../lib/bigint.pm \
../../lib/bignum.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/bignum ../../lib/auto/bignum \
bignum-0.27 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/bigint.pm
Not in MANIFEST: lib/bignum.pm
Not in MANIFEST: lib/bigrat.pm
Not in MANIFEST: lib/Math/BigFloat/Trace.pm
Not in MANIFEST: lib/Math/BigInt/Trace.pm
Not in MANIFEST: t/big_e_pi.t
Not in MANIFEST: t/bigexp.t
Not in MANIFEST: t/bigint.t
Not in MANIFEST: t/bignum.t
Not in MANIFEST: t/bigrat.t
Not in MANIFEST: t/bii_e_pi.t
Not in MANIFEST: t/biinfnan.t
Not in MANIFEST: t/bir_e_pi.t
Not in MANIFEST: t/bn_lite.t
Not in MANIFEST: t/bninfnan.t
Not in MANIFEST: t/br_lite.t
Not in MANIFEST: t/brinfnan.t
Not in MANIFEST: t/in_effect.t
Not in MANIFEST: t/infnan.inc
Not in MANIFEST: t/option_a.t
Not in MANIFEST: t/option_l.t
Not in MANIFEST: t/option_p.t
Not in MANIFEST: t/ratopt_a.t
Not in MANIFEST: t/scope_f.t
Not in MANIFEST: t/scope_i.t
Not in MANIFEST: t/scope_r.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/bignum'
Making constant (distclean)
Making distclean in dist/constant
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/constant'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/constant/extralibs.all \
core.[0-9][0-9] constant.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml constant.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/constant/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
constant.def core.[0-9][0-9][0-9] \
mon.out libconstant.def \
perlmain.c perl.exe \
so_locations constant.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/constant.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/constant ../../lib/auto/constant \
constant-1.21 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/constant.pm
Not in MANIFEST: t/constant.t
Not in MANIFEST: t/utf8.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/constant'
Making encoding::warnings (distclean)
Making distclean in cpan/encoding-warnings
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/encoding/warnings/extralibs.all \
core.[0-9][0-9] warnings.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml warnings.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/encoding/warnings/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
warnings.def core.[0-9][0-9][0-9] \
mon.out libwarnings.def \
perlmain.c perl.exe \
so_locations warnings.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/encoding/warnings.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/encoding/warnings ../../lib/auto/encoding/warnings \
encoding-warnings-0.11 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: lib/encoding/warnings.pm
Not in MANIFEST: t/1-warning.t
Not in MANIFEST: t/2-fatal.t
Not in MANIFEST: t/3-normal.t
Not in MANIFEST: t/4-lexical.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/encoding-warnings'
Making if (distclean)
Making distclean in dist/if
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/if'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/if/extralibs.all \
core.[0-9][0-9] if.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml if.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/if/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
if.def core.[0-9][0-9][0-9] \
mon.out libif.def \
perlmain.c perl.exe \
so_locations if.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/if.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/if ../../lib/auto/if \
if-0.0601 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: if.pm
Not in MANIFEST: t/if.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/if'
Making lib (distclean)
Making distclean in dist/lib
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/dist/lib'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/lib/extralibs.all \
core.[0-9][0-9] lib.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml lib.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/lib/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
lib.def core.[0-9][0-9][0-9] \
mon.out liblib.def \
perlmain.c perl.exe \
so_locations lib.exp
rm -rf \
lib.pm blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/lib.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/lib ../../lib/auto/lib \
lib-0.62
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib_pm.PL
Not in MANIFEST: Makefile.PL
Not in MANIFEST: t/01lib.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/dist/lib'
Making libnet (distclean)
Making distclean in cpan/libnet
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Net/extralibs.all \
core.[0-9][0-9] Net.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Net.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Net/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Net.def core.[0-9][0-9][0-9] \
mon.out libNet.def \
perlmain.c perl.exe \
so_locations Net.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Net/FTP/L.pm ../../lib/Net/FTP/E.pm \
../../lib/Net/FTP.pm ../../lib/Net/FTP/dataconn.pm \
Makefile.old ../../lib/Net/FTP/I.pm \
../../lib/Net/Time.pm Makefile \
../../lib/Net/FTP/A.pm ../../lib/Net/POP3.pm \
../../lib/Net/Netrc.pm ../../lib/Net/NNTP.pm \
../../lib/Net/Domain.pm ../../lib/Net/Config.pm \
../../lib/Net/libnetFAQ.pod ../../lib/Net/Cmd.pm \
../../lib/Net/SMTP.pm
rm -rf \
../../lib/auto/Net ../../lib/auto/Net \
libnet-1.22
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: Changes
Not in MANIFEST: Config.eg
Not in MANIFEST: demos/ftp
Not in MANIFEST: demos/inetd
Not in MANIFEST: demos/nntp
Not in MANIFEST: demos/nntp.mirror
Not in MANIFEST: demos/pop3
Not in MANIFEST: demos/smtp.self
Not in MANIFEST: demos/time
Not in MANIFEST: Hostname.pm.eg
Not in MANIFEST: Makefile.PL
Not in MANIFEST: Net/Cmd.pm
Not in MANIFEST: Net/Config.pm
Not in MANIFEST: Net/Domain.pm
Not in MANIFEST: Net/FTP.pm
Not in MANIFEST: Net/FTP/A.pm
Not in MANIFEST: Net/FTP/dataconn.pm
Not in MANIFEST: Net/FTP/E.pm
Not in MANIFEST: Net/FTP/I.pm
Not in MANIFEST: Net/FTP/L.pm
Not in MANIFEST: Net/libnetFAQ.pod
Not in MANIFEST: Net/Netrc.pm
Not in MANIFEST: Net/NNTP.pm
Not in MANIFEST: Net/POP3.pm
Not in MANIFEST: Net/SMTP.pm
Not in MANIFEST: Net/Time.pm
Not in MANIFEST: README
Not in MANIFEST: t/config.t
Not in MANIFEST: t/datasend.t
Not in MANIFEST: t/ftp.t
Not in MANIFEST: t/hostname.t
Not in MANIFEST: t/libnet_t.pl
Not in MANIFEST: t/netrc.t
Not in MANIFEST: t/nntp.t
Not in MANIFEST: t/require.t
Not in MANIFEST: t/smtp.t
Not in MANIFEST: t/time.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/libnet'
Making parent (distclean)
Making distclean in cpan/parent
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/parent'
rm -f \
*.a core \
core.[0-9] ../../lib/auto/parent/extralibs.all \
core.[0-9][0-9] parent.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml parent.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/parent/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
parent.def core.[0-9][0-9][0-9] \
mon.out libparent.def \
perlmain.c perl.exe \
so_locations parent.exp
rm -rf \
blib
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/parent.pm Makefile.old \
Makefile
rm -rf \
../../lib/auto/parent ../../lib/auto/parent \
parent-0.225 Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/parent.pm
Not in MANIFEST: t/compile-time-file.t
Not in MANIFEST: t/compile-time.t
Not in MANIFEST: t/lib/Dummy.pm
Not in MANIFEST: t/lib/Dummy/Outside.pm
Not in MANIFEST: t/lib/Dummy2.plugin
Not in MANIFEST: t/lib/FileThatOnlyExistsAsPMC.pmc
Not in MANIFEST: t/lib/ReturnsFalse.pm
Not in MANIFEST: t/parent-classfromclassfile.t
Not in MANIFEST: t/parent-classfromfile.t
Not in MANIFEST: t/parent-pmc.t
Not in MANIFEST: t/parent-returns-false.t
Not in MANIFEST: t/parent.t
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/parent'
Making podlators (distclean)
Making distclean in cpan/podlators
/usr/bin/make distclean PERL_CORE=1
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
rm -f \
blib/script/pod2text blib/script/pod2man
rm -f \
*.a core \
core.[0-9] ../../lib/auto/Pod/extralibs.all \
core.[0-9][0-9] Pod.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
MYMETA.yml Pod.x \
perl \
tmon.out *.o \
pm_to_blib ../../lib/auto/Pod/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
Pod.def core.[0-9][0-9][0-9] \
mon.out libPod.def \
perlmain.c perl.exe \
so_locations Pod.exp
rm -rf \
pod2text blib \
pod2man
mv Makefile Makefile.old > /dev/null 2>&1
rm -f \
../../lib/Pod/Text/Termcap.pm ../../lib/Pod/ParseLink.pm \
Makefile.old ../../lib/Pod/Text.pm \
../../lib/Pod/Text/Overstrike.pm Makefile \
../../lib/Pod/Man.pm ../../lib/Pod/Text/Color.pm
rm -rf \
../../lib/auto/Pod pod2text.PL \
../../lib/auto/Pod podlators-2.4.0 \
pod2man.PL Makefile.PL
.../../miniperl "-I../../lib" "-I../../lib" "-MExtUtils::Manifest=fullcheck" -e fullcheck
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Problem opening MANIFEST: No such file or directory at /tmp/buildd/perl-5.14.2/dist/ExtUtils-Manifest/lib/ExtUtils/Manifest.pm line 344.
Not in MANIFEST: lib/Pod/Man.pm
Not in MANIFEST: lib/Pod/ParseLink.pm
Not in MANIFEST: lib/Pod/Text.pm
Not in MANIFEST: lib/Pod/Text/Color.pm
Not in MANIFEST: lib/Pod/Text/Overstrike.pm
Not in MANIFEST: lib/Pod/Text/Termcap.pm
Not in MANIFEST: scripts/pod2man.PL
Not in MANIFEST: scripts/pod2text.PL
Not in MANIFEST: t/basic.cap
Not in MANIFEST: t/basic.clr
Not in MANIFEST: t/basic.man
Not in MANIFEST: t/basic.ovr
Not in MANIFEST: t/basic.pod
Not in MANIFEST: t/basic.t
Not in MANIFEST: t/basic.txt
Not in MANIFEST: t/color.t
Not in MANIFEST: t/devise-date.t
Not in MANIFEST: t/filehandle.t
Not in MANIFEST: t/man-heading.t
Not in MANIFEST: t/man-options.t
Not in MANIFEST: t/man-perlio.t
Not in MANIFEST: t/man-utf8.t
Not in MANIFEST: t/man.t
Not in MANIFEST: t/overstrike.t
Not in MANIFEST: t/parselink.t
Not in MANIFEST: t/pod-parser.t
Not in MANIFEST: t/pod-spelling.t
Not in MANIFEST: t/pod.t
Not in MANIFEST: t/termcap.t
Not in MANIFEST: t/text-encoding.t
Not in MANIFEST: t/text-options.t
Not in MANIFEST: t/text-perlio.t
Not in MANIFEST: t/text-utf8.t
Not in MANIFEST: t/text.t
Not in MANIFEST: VERSION
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/cpan/podlators'
rm -f realclean.sh veryclean.sh
for file in `find cpan dist ext -name ppport.h` ; do rm -f $file; done
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2'
make[2]: Entering directory `/tmp/buildd/perl-5.14.2'
rm -f core.*perl.*.? t/core.perl.*.? .?*.c
rm -f core *perl.core t/core t/*perl.core core.* t/core.*
rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl t/rantests
rm -f so_locations
rm -rf UU Makefile cflags config.h makedepend makedir myconfig pod/Makefile pstruct
rm -f makefile makefile.old makefile.old
rm -f preplibrary lib/Config.pm lib/Config_heavy.pl lib/Config_git.pl lib/Config.pod lib/ExtUtils/Miniperl.pm git_version.h lib/buildcustomize.pl
rm -rf lib/unicore/Decomposition.pl lib/unicore/TestProp.pl lib/unicore/CombiningClass.pl lib/unicore/Name.pl lib/unicore/Heavy.pl lib/unicore/mktables.lst lib/unicore/To lib/unicore/lib
rm -rf lib/auto
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
rm -f preload
rm -rf lib/Encode lib/Compress lib/Hash lib/re
rm -rf lib/TAP lib/Module/Pluggable lib/App
rm -rf lib/mro
rm -rf lib/IO/Compress lib/IO/Uncompress
rm -f lib/ExtUtils/ParseXS/t/XSTest.c
rm -f lib/ExtUtils/ParseXS/t/XSTest.o
rm -f lib/ExtUtils/ParseXS/t/XSTest.so
rm -fr lib/B
rm -fr lib/CPAN lib/CPANPLUS
rm -fr lib/ExtUtils/CBuilder
rmdir cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-localmirror
rmdir: failed to remove `cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus': No such file or directory
rmdir: failed to remove `cpan/CPANPLUS/t/dummy-cpanplus': No such file or directory
rmdir: failed to remove `cpan/CPANPLUS/t/dummy-localmirror': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir ext/B/lib
rmdir: failed to remove `ext/B/lib': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Archive/Tar lib/Archive lib/Attribute
rmdir lib/CGI
rmdir lib/Data lib/Devel lib/Digest
rmdir: failed to remove `lib/Data': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/ExtUtils/Command lib/ExtUtils/Constant lib/ExtUtils/Liblist lib/ExtUtils/MakeMaker
rmdir lib/File/Spec lib/Filter/Util lib/Filter
rmdir: failed to remove `lib/File/Spec': No such file or directory
rmdir: failed to remove `lib/Filter/Util': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/I18N/LangTags lib/IO/Socket lib/IO lib/IPC
rmdir: failed to remove `lib/IO/Socket': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/List/Util lib/List
rmdir: failed to remove `lib/List/Util': No such file or directory
rmdir: failed to remove `lib/List': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Locale/Maketext lib/Locale
rmdir: failed to remove `lib/Locale': Directory not empty
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Log/Message lib/Log
rmdir lib/Math/Big* lib/Math
rmdir lib/Memoize lib/MIME
rmdir: failed to remove `lib/MIME': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Module/Build/Platform lib/Module/Build lib/Module/Load lib/Module
rmdir lib/Net/FTP lib/Object
rmdir lib/Parse/CPAN lib/Parse
rmdir lib/PerlIO/via lib/PerlIO
rmdir lib/Package lib/Params
rmdir lib/Pod/Perldoc lib/Pod/Simple lib/Pod/Text
rmdir lib/Sys lib/Scalar/Util lib/Scalar
rmdir: failed to remove `lib/Sys': No such file or directory
rmdir: failed to remove `lib/Scalar/Util': No such file or directory
rmdir: failed to remove `lib/Scalar': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Term/UI lib/Thread lib/Tie/Hash
rmdir: failed to remove `lib/Tie/Hash': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test
rmdir lib/Unicode/Collate
rmdir: failed to remove `lib/Unicode/Collate': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/XS/APItest lib/XS
rmdir: failed to remove `lib/XS/APItest': No such file or directory
rmdir: failed to remove `lib/XS': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rmdir lib/inc/latest lib/inc
rmdir lib/autodie/exception lib/autodie lib/encoding lib/threads
rmdir: failed to remove `lib/threads': No such file or directory
make[2]: [_cleaner2] Error 1 (ignored)
rm -f lib/ExtUtils/CBuilder/t/libcompilet.dll.a
rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2'
rm -f *.o *.a all perlmain.c opmini.c perlmini.c uudmap.h generate_uudmap bitcount.h
rmdir .depending
rmdir: failed to remove `.depending': No such file or directory
make[1]: [_mopup] Error 1 (ignored)
make[1]: [_mopup] Error 1 (ignored)
make[1]: [_mopup] Error 1 (ignored)
rm -f perl.exp ext.libs pod/perltoc.pod extra.pods pod/perl5142delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod uni.data opmini.o perlmini.o
rm -f perl.export perl.dll perl.libexp perl.map perl.def
rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
rm -f perl miniperl libperl.a libperl.* microperl
rm -f config.arch config.over runtests
rm -f t/test_state
rm -f config.sh cppstdin Policy.sh extras.lst
make[1]: Leaving directory `/tmp/buildd/perl-5.14.2'
[ -f patchlevel-debian.h ] || touch patchlevel-debian.h
/bin/bash debian/config.debian --shared
First let's make sure your kit is complete. Checking...
Locating common programs...
Configure: line 2454: less: command not found
Checking compatibility between /bin/echo and builtin echo (if any)...
Symbolic links are supported.
Checking how to test for symbolic links...
You can test for symbolic links with 'test -h'.
Good, your tr supports [:lower:] and [:upper:] to convert case.
Using [:upper:] and [:lower:] to convert case.
3b1 dragonfly irix_6_0 opus super-ux
aix dynix irix_6_1 os2 svr4
aix_3 dynixptx isc os390 svr5
aix_4 epix isc_2 os400 ti1500
altos486 esix4 linux posix-bc titanos
amigaos fps lynxos powerux ultrix_4
atheos freebsd midnightbsd qnx umips
aux_3 genix mips rhapsody unicos
beos gnu mirbsd riscos unicosmk
bsdos gnukfreebsd mpc sco unisysdynix
catamount gnuknetbsd mpeix sco_2_3_0 utekv
convexos greenhills ncr_tower sco_2_3_1 uts
cxux haiku netbsd sco_2_3_2 uwin
cygwin hpux newsos4 sco_2_3_3 vmesa
darwin i386 next_3 sco_2_3_4 vos
dcosx interix next_3_0 solaris_2
dec_osf irix_4 next_4 stellar
dgux irix_5 nonstopux sunos_4_0
dos_djgpp irix_6 openbsd sunos_4_1
Which of these apply, if any? [linux]
You appear to have ELF support. I'll try to use it for dynamic loading.
If dynamic loading doesn't work, read hints/linux.sh for further information.
Operating system name? [linux]
Operating system version? [3.2.0-1+m68k.1-atari]
Installation prefix to use? (~name ok) [/usr]
AFS does not seem to be running...
What installation prefix should I use for installing files? (~name ok)
[/usr]
Build Perl for SOCKS? [n]
Use the PerlIO abstraction layer? [y]
Getting the current patchlevel...
Build a threading Perl? [y]
Use which C compiler? [cc]
Checking for GNU cc in disguise and/or its version number...
Now, how can we feed standard input to your C preprocessor...
Directories to use for library searches?
[/usr/local/lib /lib/m68k-linux-gnu /lib /usr/lib/m68k-linux-gnu /usr/lib]
What is the file extension used for shared libraries? [so]
Try to use long doubles if available? [n]
Checking for optional libraries...
What libraries to use?
[-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt]
What optimizer/debugger flag should be used? [-O2]
Any additional cc flags?
[-D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include]
Let me guess what the preprocessor flags are...
Any additional ld flags (NOT including libraries)?
[ -fstack-protector -L/usr/local/lib]
Checking your choice of C compiler and flags for coherency...
Computing filename position in cpp output for #include directives...
<stdlib.h> found.
Checking to see how big your integers are...
Checking to see if you have long long...
Checking to see how big your long longs are...
<inttypes.h> found.
Checking to see if you have int64_t...
Checking which 64-bit integer type we could use...
We could use 'long long' for 64-bit integers.
Try to use 64-bit integers, if available? [y]
Try to use maximal 64-bit support, if available? [n]
Checking to see how big your double precision numbers are...
Checking to see if you have long double...
Checking to see how big your long doubles are...
What is your architecture name [m68k-linux-gnu]
Threads selected.
....setting architecture name to m68k-linux-gnu-thread.
Multiplicity selected.
....setting architecture name to m68k-linux-gnu-thread-multi.
64 bit integers selected.
....setting architecture name to m68k-linux-gnu-thread-multi-64int.
Perlio selected.
Pathname where the public executables will reside? (~name ok) [/usr/bin]
Use relocatable @INC? [n]
Pathname where the private library files will reside? (~name ok)
[/usr/share/perl/5.14]
Where do you want to put the public architecture-dependent libraries? (~name ok)
[/usr/lib/perl/5.14]
Other username to test security of setuid scripts with? [none]
Well, the recommended value is *not* secure.
Does your kernel have *secure* setuid scripts? [n]
Installation prefix to use for add-on modules and utilities? (~name ok)
[/usr/local]
Pathname for the site-specific library files? (~name ok)
[/usr/local/share/perl/5.14.2]
List of earlier versions to include in @INC? [none]
<malloc/malloc.h> NOT found.
<malloc.h> found.
Checking to see how well your C compiler groks the void type...
Good. It appears to support void to the level perl5 wants.
Checking to see how big your pointers are...
Do you wish to wrap malloc calls to protect against potential overflows? [y]
Do you wish to attempt to use the malloc that comes with perl5? [n]
Your system wants malloc to return 'void *', it would seem.
Your system uses void free(), it would seem.
Pathname for the site-specific architecture-dependent library files? (~name ok)
[/usr/local/lib/perl/5.14.2]
Do you want to configure vendor-specific add-on directories? [y]
Installation prefix to use for vendor-supplied add-ons? (~name ok) [/usr]
Pathname for the vendor-supplied library files? (~name ok)
[/usr/share/perl5]
Pathname for vendor-supplied architecture-dependent files? (~name ok)
[/usr/lib/perl5]
Colon-separated list of additional directories for perl to search? [none]
Checking out function prototypes...
Support DTrace if available? [n]
Install any extra modules (y or n)? [n]
Directory for the main Perl5 html pages? (~name ok) [none]
Directory for the Perl5 module html pages? (~name ok) [none]
Checking for GNU C Library...
Shall I use /usr/bin/nm to extract C symbols from the libraries? [n]
<dld.h> NOT found.
Checking for C++...
dlopen() found.
<unistd.h> found.
Do you wish to use dynamic loading? [y]
Source file to use for dynamic loading [ext/DynaLoader/dl_dlopen.xs]
Any special flags to pass to cc -c to compile shared library modules?
[-fPIC]
What command should be used to create dynamic libraries? [cc]
Any special flags to pass to cc to create a dynamically loaded library?
[-shared -O2 -g -L/usr/local/lib -fstack-protector]
Any special flags to pass to cc to use dynamic linking? [-Wl,-E]
Build a shared libperl.so (y/n) [y]
What name do you want to give to the shared libperl? [libperl.so.5.14.2]
Adding -Wl,-rpath,/usr/lib/perl/5.14/CORE to the flags
passed to cc so that the perl executable will find the
installed shared libperl.so.5.14.2.
System manual is in /usr/share/man/man1.
Where do the main Perl5 manual pages (source) go? (~name ok)
[/usr/share/man/man1]
What suffix should be used for the main Perl5 man pages? [1]
You can have filenames longer than 14 characters.
Where do the perl5 library man pages (source) go? (~name ok)
[/usr/share/man/man3]
What suffix should be used for the perl5 library man pages? [3perl]
Figuring out host name...
Your host name appears to be "ara5.mirbsd.org". Right? [y]
What is your domain name? [.mirbsd.org]
What is your e-mail address? [pbuilder at ara5.mirbsd.org]
Perl administrator e-mail address [pbuilder at ara5.mirbsd.org]
Do you want to install only the version-specific parts of perl? [n]
What shall I put after the #! to start up perl ("none" to not use #!)?
[/usr/bin/perl]
Where do you keep publicly executable scripts? (~name ok) [/usr/bin]
Pathname where the add-on public executables should be installed? (~name ok)
[/usr/local/bin]
Pathname where the site-specific html pages should be installed? (~name ok)
[none]
Pathname where the site-specific library html pages should be installed? (~name ok)
[none]
Pathname where the site-specific manual pages should be installed? (~name ok)
[/usr/local/man/man1]
Pathname where the site-specific library manual pages should be installed? (~name ok)
[/usr/local/man/man3]
Pathname where add-on public executable scripts should be installed? (~name ok)
[/usr/local/bin]
Use the "fast stdio" if available? [n]
off_t found.
Checking to see how big your file offsets are...
fpos_t found.
Checking the size of fpos_t...
Try to understand large files, if available? [y]
Rechecking to see how big your file offsets are...
Rechecking the size of fpos_t... 16 bytes.
Pathname for the vendor-supplied executables directory? (~name ok)
[/usr/bin]
Pathname for the vendor-supplied html pages? (~name ok) [none]
Pathname for the vendor-supplied html pages? (~name ok) [none]
Pathname for the vendor-supplied manual section 1 pages? (~name ok)
[/usr/share/man/man1]
Pathname for the vendor-supplied manual section 3 pages? (~name ok)
[/usr/share/man/man3]
Pathname for the vendor-supplied scripts directory? (~name ok) [/usr/bin]
Using <string.h> instead of <strings.h>.
qgcvt() found.
Checking how to print long doubles...
gconvert NOT found.
gcvt() found.
I'll use gcvt to convert floats into a string.
fwalk() NOT found.
access() found.
<sys/file.h> defines the *_OK access constants.
accessx() NOT found.
aintl() NOT found.
alarm() found.
ctime64() NOT found.
localtime64() NOT found.
gmtime64() NOT found.
mktime64() NOT found.
difftime64() NOT found.
asctime64() NOT found.
<pthread.h> found.
<sys/types.h> found.
<sys/select.h> found.
Testing to see if we should include <time.h>, <sys/time.h> or both.
We'll include <time.h>.
We'll include <sys/time.h>.
Checking to see if your struct tm has tm_zone field...
Checking to see if your struct tm has tm_gmtoff field...
asctime_r() found.
atolf() NOT found.
atoll() found.
Checking whether your compiler can handle __attribute__((format)) ...
Checking whether your compiler allows __printf__ format to be null ...
Checking whether your compiler can handle __attribute__((malloc)) ...
Checking whether your compiler can handle __attribute__((nonnull(1))) ...
Checking whether your compiler can handle __attribute__((noreturn)) ...
Checking whether your compiler can handle __attribute__((pure)) ...
Checking whether your compiler can handle __attribute__((unused)) ...
Checking whether your compiler can handle __attribute__((deprecated)) ...
Checking whether your compiler can handle __attribute__((warn_unused_result)) ...
bcmp() found.
bcopy() found.
getpgrp() found.
You have to use getpgrp() instead of getpgrp(pid).
setpgrp() found.
You have to use setpgrp() instead of setpgrp(pid,pgrp).
Checking whether your compiler can handle __builtin_choose_expr ...
Checking whether your compiler can handle __builtin_expect ...
bzero() found.
<stdarg.h> found.
<varargs.h> found.
We'll include <stdarg.h> to get va_dcl definition.
You have <stdarg.h> and <stdlib.h>, so checking for C99 variadic macros.
You have C99 variadic macros.
You have void (*signal())().
Checking whether your C compiler can cast large floats to int32.
Checking whether your C compiler can cast negative float to unsigned.
vprintf() found.
Your vsprintf() returns (int).
chown() found.
chroot() found.
chsize() NOT found.
class() NOT found.
clearenv() found.
Hmm... Looks like you have Berkeley networking support.
socketpair() found.
Checking the availability sa_len in the sock struct ...
Checking the availability sin6_scope_id in struct sockaddr_in6 ...
Checking the availability of certain socket constants...
<sys/uio.h> found.
Checking to see if your system supports struct cmsghdr...
Checking to see if your C compiler knows about "const"...
copysignl() found.
crypt() found.
<crypt.h> found.
crypt_r() found.
ctermid() found.
ctermid_r() NOT found.
ctime_r() found.
cuserid() found.
<limits.h> found.
<float.h> found.
DBL_DIG found.
dbmclose() found.
<dbm.h> found.
difftime() found.
<dirent.h> found.
Your directory entries are struct dirent.
Your directory entry does not know about the d_namlen field.
Checking to see if DIR has a dd_fd member variable
<sys/dir.h> found.
<sys/ndir.h> NOT found.
dirfd() found.
dlerror() found.
<dlfcn.h> found.
What is the extension of dynamically loaded modules [so]
Checking whether your dlsym() needs a leading underscore ...
dlsym doesn't need a leading underscore.
drand48_r() found.
dup2() found.
eaccess() found.
endgrent() found.
<grp.h> found.
endgrent_r() NOT found.
endhostent() found.
<netdb.h> found.
endhostent_r() NOT found.
endnetent() found.
endnetent_r() NOT found.
endprotoent() found.
endprotoent_r() NOT found.
endpwent() found.
<pwd.h> found.
endpwent_r() NOT found.
endservent() found.
endservent_r() NOT found.
<sys/file.h> defines the O_* constants...
and you have the 3 argument form of open().
<sys/file.h> found.
We'll be including <sys/file.h>.
<fcntl.h> found.
We don't need to include <fcntl.h> if we include <sys/file.h>.
fork() found.
pipe() found.
Figuring out the flag used by open() for non-blocking I/O...
Let's see what value errno gets from read() on a O_NONBLOCK file...
Checking how std your stdio is...
Checking to see what happens if we set the stdio ptr...
Increasing ptr in your stdio decreases cnt by the same amount. Good.
You seem to have 'fast stdio' to directly manipulate the stdio buffers.
fchdir() found.
fchmod() found.
fchown() found.
fcntl() found.
Well, your system knows about the normal fd_set typedef...
and you have the normal fd_set macros (just as I'd expect).
fgetpos() found.
finite() found.
finitel() found.
flock() found.
fp_class() NOT found.
pathconf() found.
fpathconf() found.
fpclass() NOT found.
fpclassify() NOT found.
fpclassl() NOT found.
Checking to see if you have fpos64_t...
frexpl() found.
<sys/param.h> found.
<sys/mount.h> found.
Checking to see if your system supports struct fs_data...
fseeko() found.
fsetpos() found.
fstatfs() found.
statvfs() found.
fstatvfs() found.
fsync() found.
ftello() found.
Checking if you have a working futimes()
Yes, you have
<ndbm.h> NOT found.
<gdbm/ndbm.h> NOT found.
<gdbm-ndbm.h> found.
dbm_open() found.
Checking if your <gdbm-ndbm.h> uses prototypes...
getaddrinfo() found.
getcwd() found.
getespwnam() NOT found.
getfsstat() NOT found.
getgrent() found.
getgrent_r() found.
getgrgid_r() found.
getgrnam_r() found.
gethostbyaddr() found.
gethostbyname() found.
gethostent() found.
gethostname() found.
uname() found.
Shall I ignore gethostname() from now on? [n]
gethostbyaddr_r() found.
gethostbyname_r() found.
gethostent_r() found.
getitimer() found.
getlogin() found.
getlogin_r() found.
getmnt() NOT found.
getmntent() found.
getnameinfo() found.
getnetbyaddr() found.
getnetbyname() found.
getnetent() found.
getnetbyaddr_r() found.
getnetbyname_r() found.
getnetent_r() found.
getpagesize() found.
getprotobyname() found.
getprotobynumber() found.
getprotoent() found.
getpgid() found.
getpgrp2() NOT found.
getppid() found.
getpriority() found.
getprotobyname_r() found.
getprotobynumber_r() found.
getprotoent_r() found.
getprpwnam() NOT found.
getpwent() found.
getpwent_r() found.
getpwnam_r() found.
getpwuid_r() found.
getservbyname() found.
getservbyport() found.
getservent() found.
getservbyname_r() found.
getservbyport_r() found.
getservent_r() found.
getspnam() found.
<shadow.h> found.
getspnam_r() found.
gettimeofday() found.
gmtime_r() found.
hasmntopt() found.
<netinet/in.h> found.
<arpa/inet.h> found.
htonl() found.
ilogbl() found.
strchr() found.
inet_aton() found.
inet_ntop() found.
inet_pton() found.
isascii() found.
isfinite() NOT found.
isinf() found.
isnan() found.
isnanl() found.
killpg() found.
lchown() found.
LDBL_DIG found.
<math.h> found.
Checking to see if your libm supports _LIB_VERSION...
Yes, it does (2)
link() found.
localtime_r() found.
localeconv() found.
lockf() found.
lstat() found.
madvise() found.
malloc_size() NOT found.
malloc_good_size() NOT found.
mblen() found.
mbstowcs() found.
mbtowc() found.
memchr() found.
memcmp() found.
memcpy() found.
memmove() found.
memset() found.
mkdir() found.
mkdtemp() found.
mkfifo() found.
mkstemp() found.
mkstemps() found.
mktime() found.
<sys/mman.h> found.
mmap() found.
and it returns (void *).
sqrtl() found.
scalbnl() found.
modfl() found.
Your modfl() seems okay for large values.
mprotect() found.
msgctl() found.
msgget() found.
msgsnd() found.
msgrcv() found.
You have the full msg*(2) library.
Checking to see if your system supports struct msghdr...
msync() found.
munmap() found.
nice() found.
<langinfo.h> found.
nl_langinfo() found.
Checking to see if your C compiler knows about "volatile"...
Choosing the C types to be used for Perl's internal types...
Checking how many bits of your UVs your NVs can preserve...
Checking to find the largest integer value your NVs can hold...
The largest integer your NVs can preserve is equal to 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0
Checking whether NV 0.0 is all bits zero in memory...
0.0 is represented as all bits zero in memory
Checking to see if you have off64_t...
Checking what constant to use for creating joinable pthreads...
You seem to use PTHREAD_CREATE_JOINABLE.
pause() found.
poll() found.
prctl() found.
readlink() found.
vfork() found.
Do you still want to use vfork()? [n]
pthread_atfork found.
pthread_attr_setscope() found.
sched_yield() found.
pthread_yield() found.
random_r() found.
readdir() found.
seekdir() found.
telldir() found.
rewinddir() found.
readdir64_r() found.
readdir_r() found.
readv() found.
recvmsg() found.
rename() found.
rmdir() found.
<memory.h> found.
Checking if your memcmp() can compare relative magnitude...
select() found.
semctl() found.
semget() found.
semop() found.
You have the full sem*(2) library.
You do not have union semun in <sys/sem.h>.
You can use union semun for semctl IPC_STAT.
You can also use struct semid_ds* for semctl IPC_STAT.
sendmsg() found.
setegid() found.
seteuid() found.
setgrent() found.
setgrent_r() NOT found.
sethostent() found.
sethostent_r() NOT found.
setitimer() found.
setlinebuf() found.
setlocale() found.
<locale.h> found.
setlocale_r() NOT found.
setnetent() found.
setnetent_r() NOT found.
setprotoent() found.
setpgid() found.
setpgrp2() NOT found.
setpriority() found.
setproctitle() NOT found.
setprotoent_r() NOT found.
setpwent() found.
setpwent_r() NOT found.
setregid() found.
setresgid() found.
setreuid() found.
setresuid() found.
setrgid() NOT found.
setruid() NOT found.
setservent() found.
setservent_r() NOT found.
setsid() found.
setvbuf() found.
<sfio.h> NOT found.
shmctl() found.
shmget() found.
shmat() found.
and it returns (void *).
shmdt() found.
You have the full shm*(2) library.
sigaction() found.
<sunmath.h> NOT found.
Checking to see if you have signbit() available to work on double... Yes.
sigprocmask() found.
POSIX sigsetjmp found.
snprintf() found.
vsnprintf() found.
sockatmark() found.
socks5_init() NOT found.
Checking whether sprintf returns the length of the string...
sprintf returns the length of the string (as ANSI says it should)
srand48_r() found.
srandom_r() found.
<sys/stat.h> found.
Checking to see if your struct stat has st_blocks field...
<sys/vfs.h> found.
<sys/statfs.h> found.
Checking to see if your system supports struct statfs...
Checking to see if your struct statfs has f_flags field...
Your compiler supports static __inline__.
Checking how to access stdio streams by file descriptor number...
I can't figure out how to access stdio streams by file descriptor number.
strcoll() found.
Checking to see if your C compiler can copy structs...
strerror() found.
strerror_r() found.
strftime() found.
strlcat() NOT found.
strlcpy() NOT found.
strtod() found.
strtol() found.
strtold() found.
strtoll() found.
strtoq() found.
strtoul() found.
strtoull() found.
strtouq() found.
strxfrm() found.
symlink() found.
syscall() found.
sysconf() found.
system() found.
tcgetpgrp() found.
tcsetpgrp() found.
time() found.
time_t found.
timegm() found.
<sys/times.h> found.
times() found.
clock_t found.
tmpnam_r() found.
truncate() found.
ttyname_r() found.
tzname[] found.
(Testing for character data alignment may crash the test. That's okay.)
It seems that you must access character data in an aligned manner.
ualarm() found.
Hmm. Based on the hints in hints/linux.sh,
the recommended value for $d_ualarm on this machine was "undef"!
Keep the recommended value? [y]
umask() found.
unordered() NOT found.
unsetenv() found.
usleep() found.
ustat() found.
closedir() found.
Checking whether closedir() returns a status...
wait4() found.
waitpid() found.
wcstombs() found.
wctomb() found.
writev() found.
Checking alignment constraints...
Doubles must be aligned on a how-many-byte boundary? [2]
Checking how long a character is (in bits)...
What is the length of a character (in bits)? [8]
Checking to see how your cpp does stuff like concatenate tokens...
Oh! Smells like ANSI's been here.
<db.h> found.
Checking Berkeley DB version ...
Looks OK.
Checking return type needed for hash for Berkeley DB ...
Checking return type needed for prefix for Berkeley DB ...
Looking for a random number function...
Good, found drand48().
Use which function to generate random numbers? [drand48]
Determining whether or not we are on an EBCDIC system...
Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8.
Checking how to flush all pending stdio output...
Your fflush(NULL) works okay for output streams.
Let's see if it clobbers input pipes...
fflush(NULL) seems to behave okay with input streams.
Checking the size of gid_t...
Checking the sign of gid_t...
Checking how to print 64-bit integers...
Checking the format strings to be used for Perl's internal types...
Checking the format string to be used for gids...
getgroups() found.
setgroups() found.
What type pointer is the second argument to getgroups() and setgroups()?
[gid_t]
Build Perl with MAD? [n]
Checking if your /usr/bin/make program sets $(MAKE)...
mode_t found.
It seems that you don't need va_copy().
size_t found.
What pager is used on your system? [/usr/bin/sensible-pager]
pid_t found.
Checking how to generate random libraries on your machine...
<values.h> found.
Sizeof time_t = 4
Your select() operates on 32 bits at a time.
Generating a list of signal names and numbers...
Checking the size of size_t...
Checking to see if you have socklen_t...
<socks.h> NOT found.
I'll be using ssize_t for functions returning a byte count.
Your stdio uses signed chars.
Checking the size of uid_t...
Checking the sign of uid_t...
Checking the format string to be used for uids...
It appears we'll be able to prototype varargs functions.
Which compiler compiler (yacc) shall I use? [yacc]
<assert.h> found.
<fp.h> NOT found.
<fp_class.h> NOT found.
<gdbm.h> found.
gdbm_open() found.
<ieeefp.h> NOT found.
<libutil.h> NOT found.
<mach/cthreads.h> NOT found.
<mntent.h> found.
<net/errno.h> NOT found.
<netinet/tcp.h> found.
<poll.h> found.
<prot.h> NOT found.
Guessing which symbols your C compiler and preprocessor define...
try.c: In function 'main':
try.c:5701:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5704:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5707:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5710:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5737:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5740:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5743:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5746:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5773:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5776:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5779:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5782:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5809:16: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5812:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5815:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5818:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5845:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5848:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5851:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:5854:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6637:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6640:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6643:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6646:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6673:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6676:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6679:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6682:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6709:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6712:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6715:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6718:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6745:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6748:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6751:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6754:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6781:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6784:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6787:21: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:6790:21: warning: extra tokens at end of #ifdef directive [enabled by default]
tcsetattr() found.
You have POSIX termios.h... good!
<stddef.h> found.
<sys/access.h> NOT found.
<sys/filio.h> NOT found.
<sys/ioctl.h> found.
<syslog.h> found.
<sys/mode.h> NOT found.
<sys/poll.h> found.
<sys/resource.h> found.
<sys/security.h> NOT found.
<sys/statvfs.h> found.
<sys/un.h> found.
<sys/utsname.h> found.
<sys/wait.h> found.
<ustat.h> found.
<utime.h> found.
Looking for extensions...
What extensions do you wish to load dynamically?
[B Compress/Raw/Bzip2 Compress/Raw/Zlib Cwd DB_File Data/Dumper Devel/DProf Devel/PPPort Devel/Peek Digest/MD5 Digest/SHA Encode Fcntl File/Glob Filter/Util/Call GDBM_File Hash/Util Hash/Util/FieldHash I18N/Langinfo IO IPC/SysV List/Util MIME/Base64 Math/BigInt/FastCalc NDBM_File ODBM_File Opcode POSIX PerlIO/encoding PerlIO/scalar PerlIO/via SDBM_File Socket Storable Sys/Hostname Sys/Syslog Text/Soundex Tie/Hash/NamedCapture Time/HiRes Time/Piece Unicode/Collate Unicode/Normalize XS/APItest XS/Typemap attributes mro re threads threads/shared]
What extensions do you wish to load statically? [none]
I see a config.over file. Do you wish to load it? [y]
Stripping down executable paths...
Creating config.sh...
Doing variable substitutions on .SH files...
Extracting config.h (with variable substitutions)
Extracting cflags (with variable substitutions)
Not re-extracting config.h
Extracting makedepend (with variable substitutions)
Extracting Makefile (with variable substitutions)
Extracting myconfig (with variable substitutions)
Extracting pod/Makefile (with variable substitutions)
Extracting Policy.sh (with variable substitutions)
Extracting runtests (with variable substitutions)
Extracting utils/Makefile (with variable substitutions)
Extracting x2p/cflags (with variable substitutions)
Extracting x2p/Makefile (with variable substitutions)
Run make depend now? [y]
make[1]: Entering directory `/tmp/buildd/perl-5.14.2'
sh ./makedepend MAKE=make
make[2]: Entering directory `/tmp/buildd/perl-5.14.2'
rm -f opmini.c
/bin/ln -s op.c opmini.c
rm -f perlmini.c
/bin/ln -s perl.c perlmini.c
echo av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c miniperlmain.c opmini.c perlmini.c | tr ' ' '\n' >.clist
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2'
Finding dependencies for av.o.
Finding dependencies for scope.o.
Finding dependencies for op.o.
Finding dependencies for doop.o.
Finding dependencies for doio.o.
Finding dependencies for dump.o.
Finding dependencies for gv.o.
Finding dependencies for hv.o.
Finding dependencies for mg.o.
Finding dependencies for reentr.o.
Finding dependencies for mro.o.
Finding dependencies for perl.o.
Finding dependencies for perly.o.
Finding dependencies for pp.o.
Finding dependencies for pp_hot.o.
Finding dependencies for pp_ctl.o.
Finding dependencies for pp_sys.o.
Finding dependencies for regcomp.o.
Finding dependencies for regexec.o.
Finding dependencies for utf8.o.
Finding dependencies for sv.o.
Finding dependencies for taint.o.
Finding dependencies for toke.o.
Finding dependencies for util.o.
Finding dependencies for deb.o.
Finding dependencies for run.o.
Finding dependencies for universal.o.
Finding dependencies for pad.o.
Finding dependencies for globals.o.
Finding dependencies for keywords.o.
Finding dependencies for perlio.o.
Finding dependencies for perlapi.o.
Finding dependencies for numeric.o.
Finding dependencies for mathoms.o.
Finding dependencies for locale.o.
Finding dependencies for pp_pack.o.
Finding dependencies for pp_sort.o.
Finding dependencies for miniperlmain.o.
Finding dependencies for opmini.o.
Finding dependencies for perlmini.o.
make[2]: Entering directory `/tmp/buildd/perl-5.14.2'
echo Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH pod/Makefile.SH | tr ' ' '\n' >.shlist
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2'
Updating makefile...
cd x2p; make depend
make[2]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
sh ../makedepend MAKE=make
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
echo hash.c str.c util.c walk.c | tr ' ' '\n' >.clist
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
Finding dependencies for hash.o.
Finding dependencies for str.o.
Finding dependencies for util.o.
Finding dependencies for walk.o.
make[3]: Entering directory `/tmp/buildd/perl-5.14.2/x2p'
echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist
make[3]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
Updating makefile...
make[2]: Leaving directory `/tmp/buildd/perl-5.14.2/x2p'
make[1]: Leaving directory `/tmp/buildd/perl-5.14.2'
Now you must run 'make'.
If you compile perl5 on a different machine or from a different object
directory, copy the Policy.sh file from this object directory to the
new one before you run Configure -- this will help you with most of
the policy defaults.
/usr/bin/make SHRPLDFLAGS='$(LDDLFLAGS) -Wl,-soname,libperl.so.5.14' libperl.so.5.14.2
make[1]: Entering directory `/tmp/buildd/perl-5.14.2'
`sh cflags "optimize='-O2 -g'" op.o` -fPIC op.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" miniperlmain.o` -fPIC miniperlmain.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" gv.o` -fPIC gv.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" toke.o` -fPIC toke.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perly.o` -fPIC perly.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pad.o` -fPIC pad.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" regcomp.o` -fPIC regcomp.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
regcomp.c: In function 'S_regpiece':
regcomp.c:7429:11: warning: variable 'parse_start' set but not used [-Wunused-but-set-variable]
regcomp.c: In function 'Perl_regdupe_internal':
regcomp.c:11661:14: warning: variable 'npar' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" dump.o` -fPIC dump.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" util.o` -fPIC util.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
util.c: In function 'Perl_safesyscalloc':
util.c:297:14: warning: variable 'total_size' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" mg.o` -fPIC mg.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" reentr.o` -fPIC reentr.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" mro.o` -fPIC mro.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" keywords.o` -fPIC keywords.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" hv.o` -fPIC hv.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
hv.c: In function 'S_hv_delete_common':
hv.c:907:16: warning: variable 'first_entry' set but not used [-Wunused-but-set-variable]
hv.c: In function 'S_clear_placeholders':
hv.c:1619:7: warning: variable 'first' set but not used [-Wunused-but-set-variable]
hv.c: In function 'S_unshare_hek_or_pvn':
hv.c:2649:10: warning: variable 'first' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" av.o` -fPIC av.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" run.o` -fPIC run.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_hot.o` -fPIC pp_hot.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" sv.o` -fPIC sv.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp.o` -fPIC pp.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" scope.o` -fPIC scope.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_ctl.o` -fPIC pp_ctl.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
pp_ctl.c: In function 'Perl_pp_goto':
pp_ctl.c:2702:7: warning: variable 'gimme' set but not used [-Wunused-but-set-variable]
pp_ctl.c:2701:8: warning: variable 'newsp' set but not used [-Wunused-but-set-variable]
pp_ctl.c: In function 'Perl_pp_leavewhen':
pp_ctl.c:4849:9: warning: variable 'gimme' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" pp_sys.o` -fPIC pp_sys.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
pp_sys.c: In function 'Perl_pp_warn':
pp_sys.c:422:17: warning: variable 'pv' set but not used [-Wunused-but-set-variable]
pp_sys.c: In function 'Perl_pp_die':
pp_sys.c:462:17: warning: variable 'pv' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" doop.o` -fPIC doop.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" doio.o` -fPIC doio.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" regexec.o` -fPIC regexec.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
regexec.c: In function 'S_find_byclass':
regexec.c:1529:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1535:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1540:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1550:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1560:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1565:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1576:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1583:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1595:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1602:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1621:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1628:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1646:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1653:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1672:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:1690:6: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c: In function 'S_regmatch':
regexec.c:3679:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3759:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3765:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3770:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3770:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3770:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3770:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c:3854:1: warning: variable 'throw_away' set but not used [-Wunused-but-set-variable]
regexec.c: In function 'S_regrepeat':
regexec.c:6037:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:6082:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:6134:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:6183:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:6236:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
regexec.c:6269:1: warning: variable 'ok' set but not used [-Wunused-but-set-variable]
`sh cflags "optimize='-O2 -g'" utf8.o` -fPIC utf8.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" taint.o` -fPIC taint.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" deb.o` -fPIC deb.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" universal.o` -fPIC universal.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" generate_uudmap.o` -fPIC generate_uudmap.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
cc -o generate_uudmap -fstack-protector -L/usr/local/lib generate_uudmap.o -ldl -lm -lpthread -lc -lcrypt
../generate_uudmap uudmap.h bitcount.h
`sh cflags "optimize='-O2 -g'" globals.o` -fPIC globals.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perlio.o` -fPIC perlio.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perlapi.o` -fPIC perlapi.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" numeric.o` -fPIC numeric.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" mathoms.o` -fPIC mathoms.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" locale.o` -fPIC locale.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_pack.o` -fPIC pp_pack.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" pp_sort.o` -fPIC pp_sort.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" opmini.o` -fPIC -DPERL_IS_MINIPERL -DPERL_EXTERNAL_GLOB opmini.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
`sh cflags "optimize='-O2 -g'" perlmini.o` -fPIC -DPERL_IS_MINIPERL -DPERL_EXTERNAL_GLOB perlmini.c
CCCMD = cc -DPERL_CORE -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-regmove -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -Wwrite-strings
LD_LIBRARY_PATH=/tmp/buildd/perl-5.14.2${LD_LIBRARY_PATH:+:}$LD_LIBRARY_PATH cc -fstack-protector -L/usr/local/lib -o miniperl \
gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o keywords.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o \
miniperlmain.o opmini.o perlmini.o -ldl -lm -lpthread -lc -lcrypt
LD_LIBRARY_PATH=/tmp/buildd/perl-5.14.2${LD_LIBRARY_PATH:+:}$LD_LIBRARY_PATH ./miniperl -w -Ilib -MExporter -e '<?>' || /usr/bin/make minitest
LD_LIBRARY_PATH=/tmp/buildd/perl-5.14.2${LD_LIBRARY_PATH:+:}$LD_LIBRARY_PATH ./miniperl -Ilib make_patchnum.pl
Out of memory during list extend at make_patchnum.pl line 126.
make[1]: *** [lib/Config_git.pl] Error 255
make[1]: Leaving directory `/tmp/buildd/perl-5.14.2'
make: *** [libperl.so.5.14.2] Error 2
dpkg-buildpackage: error: debian/rules build gave error exit status 2
E: Failed autobuilding of package
More information about the Perl-maintainers
mailing list