[Piuparts-devel] Bug#718544: reports packages installed when they weren't
Brian May
brian at microcomaustralia.com.au
Fri Aug 2 05:13:25 UTC 2013
Package: piuparts
Version: 0.45
piuparts does:
dpkg -i $package
If that fails, it then does:
apt-get -yf install
If that works, it assumes that $package is installed.
Bad assumption. There are two reasons why $package may not be installed.
(1) it was never unpacked in the first place, or (2) it was unpacked, then
an error occurred. The "apt-get -f install" decided the best (only?) way to
fix the problem is by removing the package.
I have a full log (attached) that reports both these issues. Based on
django-filters, which I am about to upload to incoming.
It tries to install python-django-filters_0.6-2_all.deb, but the unpack
fails:
8m1.3s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata',
'dpkg', '-i', 'tmp/python-django-filters_0.6-2_all.deb', 'tmp/
python-django-filters-doc_0.6-2_all.deb',
'tmp/django-filter_0.6-2_all.deb', 'tmp/python-django-filter_0.6-2_all.deb']
8m1.4s DUMP:
Selecting previously unselected package python-django-filters.
dpkg: regarding .../python-django-filters_0.6-2_all.deb containing
python-django-filters:
python-django-filters breaks python-django-filter (<< 0.6-2)
python-django-filter (version 0.6-1) is present and installed.
dpkg: error processing tmp/python-django-filters_0.6-2_all.deb
(--install):
installing python-django-filters would break python-django-filter, and
deconfiguration is not permitted (--auto-deconfigure might help)
It tries to install django-filter, unpack works, but the install fails (due
to above dependency failing):
dpkg: dependency problems prevent configuration of
python-django-filters-doc:
python-django-filters-doc depends on libjs-sphinxdoc (>= 1.0); however:
Package libjs-sphinxdoc is not installed.
dpkg: error processing python-django-filters-doc (--install):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of django-filter:
django-filter depends on python-django-filters; however:
Package python-django-filters is not installed.
dpkg: error processing django-filter (--install):
dependency problems - leaving unconfigured
The same thing happens for python-django-filter.
Then the "apt-get -f install" removes these unpacked packages:
8m1.4s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata',
'apt-get', '-yf', 'install']
8m3.4s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
Correcting dependencies... Done
The following packages were automatically installed and are no longer
required:
libexpat1 libffi6 libncursesw5 libpython-stdlib libpython2.7-minimal
libpython2.7-stdlib libsqlite3-0 libssl1.0.0 mime-support python
python-django python-minimal python-support python2.7 python2.7-minimal
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
libjs-jquery libjs-sphinxdoc libjs-underscore
Recommended packages:
javascript-common
The following packages will be REMOVED:
django-filter python-django-filter
The following NEW packages will be installed:
libjs-jquery libjs-sphinxdoc libjs-underscore
0 upgraded, 3 newly installed, 2 to remove and 0 not upgraded.
3 not fully installed or removed.
Need to get 174 kB of archives.
After this operation, 532 kB of additional disk space will be used.
Get:1 http://http.debian.net/debian/ unstable/main libjs-jquery all
1.7.2+dfsg-2 [80.2 kB]
Get:2 http://http.debian.net/debian/ unstable/main libjs-underscore all
1.4.4-2 [49.1 kB]
Get:3 http://http.debian.net/debian/ unstable/main libjs-sphinxdoc all
1.1.3+dfsg-8 [44.5 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 174 kB in 1s (126 kB/s)
(Reading database ... 25702 files and directories currently installed.)
Removing django-filter ...
Removing python-django-filter ...
Selecting previously unselected package libjs-jquery.
(Reading database ... 25696 files and directories currently installed.)
Unpacking libjs-jquery (from .../libjs-jquery_1.7.2+dfsg-2_all.deb) ...
Selecting previously unselected package libjs-underscore.
Unpacking libjs-underscore (from .../libjs-underscore_1.4.4-2_all.deb) ...
Selecting previously unselected package libjs-sphinxdoc.
Unpacking libjs-sphinxdoc (from .../libjs-sphinxdoc_1.1.3+dfsg-8_all.deb)
...
Setting up libjs-jquery (1.7.2+dfsg-2) ...
Setting up libjs-underscore (1.4.4-2) ...
Setting up libjs-sphinxdoc (1.1.3+dfsg-8) ...
Setting up python-django-filters-doc (0.6-2) ...
8m3.4s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata',
'apt-get', '-yf', 'install']
However piuparts concludes that everything was installed:
8m3.4s INFO: Installation of ['tmp/python-django-filters_0.6-2_all.deb',
'tmp/python-django-filters-doc_0.6-2_all.deb',
'tmp/django-filter_0.6-2_all.deb',
'tmp/python-django-filter_0.6-2_all.deb'] ok
Which is wrong, only python-django-filters-doc was installed.
piuparts furthermore concludes all tests passed:
8m10.9s INFO: PASS: Upgrading between Debian distributions.
8m10.9s INFO: PASS: All tests.
8m10.9s INFO: piuparts run ends.
However, the tests didn't really test anything as far as I can see, because
the packages failed to install.
The reason the packages didn't install appears to be because it didn't
install them in the correct order.
As far as I can tell, I am suppose to have both Replace: and Breaks: for
when files get moved between packages.
http://www.debian.org/doc/debian-policy/ch-relationships.html#s-replaces
--
Brian May <brian at microcomaustralia.com.au>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/piuparts-devel/attachments/20130802/f8127e8b/attachment-0001.html>
-------------- next part --------------
Guessed: debian
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile.
0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: piuparts version 0.45 starting up.
0m0.0s INFO: Command line arguments: /usr/sbin/piuparts -m http://http.debian.net/debian/ -d stable -d unstable ../django-filter_0.6-2_amd64.changes
0m0.0s INFO: Running on: Linux aquitard 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64
0m0.0s DEBUG: Starting command: ['dpkg', '--info', '../python-django-filters_0.6-2_all.deb']
0m0.1s DUMP:
new debian package, version 2.0.
size 11408 bytes: control archive=1291 bytes.
762 bytes, 17 lines control
1272 bytes, 15 lines md5sums
171 bytes, 9 lines * postinst #!/bin/sh
279 bytes, 14 lines * prerm #!/bin/sh
Package: python-django-filters
Source: django-filter
Version: 0.6-2
Architecture: all
Maintainer: Brian May <bam at debian.org>
Installed-Size: 92
Depends: python (>= 2.7), python (<< 2.8), python-django (>= 1.4.5)
Suggests: python-django-filters-doc
Breaks: django-filter (<< 0.6), python-django-filter (<< 0.6-2)
Replaces: django-filter (<< 0.6), python-django-filter (<< 0.6-2)
Section: python
Priority: optional
Homepage: http://github.com/alex/django-filter
Description: filter Django QuerySets based on user selections
Django-filter is a generic, reusable application to alleviate some of the more
mundane bits of view code. Specifically allowing the users to filter down a
queryset based on a model’s fields and displaying the form to let them do this.
0m0.1s DEBUG: Command ok: ['dpkg', '--info', '../python-django-filters_0.6-2_all.deb']
0m0.1s DEBUG: Starting command: ['dpkg', '--info', '../python-django-filters-doc_0.6-2_all.deb']
0m0.2s DUMP:
new debian package, version 2.0.
size 25814 bytes: control archive=1565 bytes.
625 bytes, 16 lines control
3171 bytes, 33 lines md5sums
Package: python-django-filters-doc
Source: django-filter
Version: 0.6-2
Architecture: all
Maintainer: Brian May <bam at debian.org>
Installed-Size: 160
Depends: libjs-sphinxdoc (>= 1.0)
Section: doc
Priority: optional
Homepage: http://github.com/alex/django-filter
Description: filter Django QuerySets based on user selections (Documentation)
Django-filter is a generic, reusable application to alleviate some of the more
mundane bits of view code. Specifically allowing the users to filter down a
queryset based on a model’s fields and displaying the form to let them do this.
.
This package contains the documentation.
0m0.2s DEBUG: Command ok: ['dpkg', '--info', '../python-django-filters-doc_0.6-2_all.deb']
0m0.2s DEBUG: Starting command: ['dpkg', '--info', '../django-filter_0.6-2_all.deb']
0m0.2s DUMP:
new debian package, version 2.0.
size 2698 bytes: control archive=489 bytes.
378 bytes, 11 lines control
154 bytes, 2 lines md5sums
Package: django-filter
Version: 0.6-2
Architecture: all
Maintainer: Brian May <bam at debian.org>
Installed-Size: 27
Depends: python-django-filters
Section: oldlibs
Priority: extra
Homepage: http://github.com/alex/django-filter
Description: filter Django QuerySets based on user selections (transitional package)
This is a dummy package to aid switching to python-django-filters.
0m0.2s DEBUG: Command ok: ['dpkg', '--info', '../django-filter_0.6-2_all.deb']
0m0.2s DEBUG: Starting command: ['dpkg', '--info', '../python-django-filter_0.6-2_all.deb']
0m0.2s DUMP:
new debian package, version 2.0.
size 2710 bytes: control archive=497 bytes.
407 bytes, 12 lines control
168 bytes, 2 lines md5sums
Package: python-django-filter
Source: django-filter
Version: 0.6-2
Architecture: all
Maintainer: Brian May <bam at debian.org>
Installed-Size: 27
Depends: python-django-filters
Section: oldlibs
Priority: extra
Homepage: http://github.com/alex/django-filter
Description: filter Django QuerySets based on user selections (transitional package)
This is a dummy package to aid switching to python-django-filters.
0m0.2s DEBUG: Command ok: ['dpkg', '--info', '../python-django-filter_0.6-2_all.deb']
0m0.2s DEBUG: Created temporary directory /tmp/tmp2hS8YO
0m0.2s DEBUG: Setting up minimal chroot for stable at /tmp/tmp2hS8YO.
0m0.2s DEBUG: Starting command: ['eatmydata', 'debootstrap', '--variant=minbase', '--keyring=/usr/share/keyrings/debian-archive-keyring.gpg', '--include=eatmydata', '--components=main,contrib,non-free', 'stable', '/tmp/tmp2hS8YO', 'http://http.debian.net/debian/']
4m11.9s DUMP:
I: Retrieving Release
I: Retrieving Release.gpg
I: Checking Release signature
I: Valid Release signature (key id 9FED2BCBDCD29CDF762678CBAED4B06F473041FA)
I: Retrieving Packages
I: Validating Packages
I: Retrieving Packages
I: Validating Packages
I: Retrieving Packages
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Found additional required dependencies: insserv libbz2-1.0 libdb5.1 libsemanage-common libsemanage1 libslang2 libustr-1.0-1
I: Found additional base dependencies: debian-archive-keyring gnupg gpgv libapt-pkg4.12 libreadline6 libstdc++6 libusb-0.1-4 readline-common
I: Checking component main on http://http.debian.net/debian...
I: Retrieving libacl1
I: Validating libacl1
I: Retrieving apt
I: Validating apt
I: Retrieving libapt-pkg4.12
I: Validating libapt-pkg4.12
I: Retrieving libattr1
I: Validating libattr1
I: Retrieving base-files
I: Validating base-files
I: Retrieving base-passwd
I: Validating base-passwd
I: Retrieving bash
I: Validating bash
I: Retrieving libbz2-1.0
I: Validating libbz2-1.0
I: Retrieving coreutils
I: Validating coreutils
I: Retrieving dash
I: Validating dash
I: Retrieving libdb5.1
I: Validating libdb5.1
I: Retrieving debconf
I: Validating debconf
I: Retrieving debconf-i18n
I: Validating debconf-i18n
I: Retrieving debian-archive-keyring
I: Validating debian-archive-keyring
I: Retrieving debianutils
I: Validating debianutils
I: Retrieving diffutils
I: Validating diffutils
I: Retrieving dpkg
I: Validating dpkg
I: Retrieving e2fslibs
I: Validating e2fslibs
I: Retrieving e2fsprogs
I: Validating e2fsprogs
I: Retrieving libcomerr2
I: Validating libcomerr2
I: Retrieving libss2
I: Validating libss2
I: Retrieving libc-bin
I: Validating libc-bin
I: Retrieving libc6
I: Validating libc6
I: Retrieving multiarch-support
I: Validating multiarch-support
I: Retrieving findutils
I: Validating findutils
I: Retrieving gcc-4.7-base
I: Validating gcc-4.7-base
I: Retrieving libgcc1
I: Validating libgcc1
I: Retrieving libstdc++6
I: Validating libstdc++6
I: Retrieving gnupg
I: Validating gnupg
I: Retrieving gpgv
I: Validating gpgv
I: Retrieving grep
I: Validating grep
I: Retrieving gzip
I: Validating gzip
I: Retrieving hostname
I: Validating hostname
I: Retrieving insserv
I: Validating insserv
I: Retrieving eatmydata
I: Validating eatmydata
I: Retrieving liblocale-gettext-perl
I: Validating liblocale-gettext-perl
I: Retrieving libselinux1
I: Validating libselinux1
I: Retrieving libsemanage-common
I: Validating libsemanage-common
I: Retrieving libsemanage1
I: Validating libsemanage1
I: Retrieving libsepol1
I: Validating libsepol1
I: Retrieving libtext-charwidth-perl
I: Validating libtext-charwidth-perl
I: Retrieving libtext-iconv-perl
I: Validating libtext-iconv-perl
I: Retrieving libtext-wrapi18n-perl
I: Validating libtext-wrapi18n-perl
I: Retrieving libusb-0.1-4
I: Validating libusb-0.1-4
I: Retrieving lsb-base
I: Validating lsb-base
I: Retrieving mawk
I: Validating mawk
I: Retrieving libncurses5
I: Validating libncurses5
I: Retrieving libtinfo5
I: Validating libtinfo5
I: Retrieving ncurses-base
I: Validating ncurses-base
I: Retrieving ncurses-bin
I: Validating ncurses-bin
I: Retrieving libpam-modules
I: Validating libpam-modules
I: Retrieving libpam-modules-bin
I: Validating libpam-modules-bin
I: Retrieving libpam-runtime
I: Validating libpam-runtime
I: Retrieving libpam0g
I: Validating libpam0g
I: Retrieving perl-base
I: Validating perl-base
I: Retrieving libreadline6
I: Validating libreadline6
I: Retrieving readline-common
I: Validating readline-common
I: Retrieving sed
I: Validating sed
I: Retrieving sensible-utils
I: Validating sensible-utils
I: Retrieving login
I: Validating login
I: Retrieving passwd
I: Validating passwd
I: Retrieving libslang2
I: Validating libslang2
I: Retrieving initscripts
I: Validating initscripts
I: Retrieving sysv-rc
I: Validating sysv-rc
I: Retrieving sysvinit
I: Validating sysvinit
I: Retrieving sysvinit-utils
I: Validating sysvinit-utils
I: Retrieving tar
I: Validating tar
I: Retrieving tzdata
I: Validating tzdata
I: Retrieving libustr-1.0-1
I: Validating libustr-1.0-1
I: Retrieving bsdutils
I: Validating bsdutils
I: Retrieving libblkid1
I: Validating libblkid1
I: Retrieving libmount1
I: Validating libmount1
I: Retrieving libuuid1
I: Validating libuuid1
I: Retrieving mount
I: Validating mount
I: Retrieving util-linux
I: Validating util-linux
I: Retrieving liblzma5
I: Validating liblzma5
I: Retrieving xz-utils
I: Validating xz-utils
I: Retrieving zlib1g
I: Validating zlib1g
I: Chosen extractor for .deb packages: dpkg-deb
I: Extracting libacl1...
I: Extracting libattr1...
I: Extracting base-files...
I: Extracting base-passwd...
I: Extracting bash...
I: Extracting libbz2-1.0...
I: Extracting coreutils...
I: Extracting dash...
I: Extracting libdb5.1...
I: Extracting debconf...
I: Extracting debconf-i18n...
I: Extracting debianutils...
I: Extracting diffutils...
I: Extracting dpkg...
I: Extracting e2fslibs...
I: Extracting e2fsprogs...
I: Extracting libcomerr2...
I: Extracting libss2...
I: Extracting libc-bin...
I: Extracting libc6...
I: Extracting multiarch-support...
I: Extracting findutils...
I: Extracting gcc-4.7-base...
I: Extracting libgcc1...
I: Extracting grep...
I: Extracting gzip...
I: Extracting hostname...
I: Extracting insserv...
I: Extracting liblocale-gettext-perl...
I: Extracting libselinux1...
I: Extracting libsemanage-common...
I: Extracting libsemanage1...
I: Extracting libsepol1...
I: Extracting libtext-charwidth-perl...
I: Extracting libtext-iconv-perl...
I: Extracting libtext-wrapi18n-perl...
I: Extracting lsb-base...
I: Extracting mawk...
I: Extracting libncurses5...
I: Extracting libtinfo5...
I: Extracting ncurses-base...
I: Extracting ncurses-bin...
I: Extracting libpam-modules...
I: Extracting libpam-modules-bin...
I: Extracting libpam-runtime...
I: Extracting libpam0g...
I: Extracting perl-base...
I: Extracting sed...
I: Extracting sensible-utils...
I: Extracting login...
I: Extracting passwd...
I: Extracting libslang2...
I: Extracting initscripts...
I: Extracting sysv-rc...
I: Extracting sysvinit...
I: Extracting sysvinit-utils...
I: Extracting tar...
I: Extracting tzdata...
I: Extracting libustr-1.0-1...
I: Extracting bsdutils...
I: Extracting libblkid1...
I: Extracting libmount1...
I: Extracting libuuid1...
I: Extracting mount...
I: Extracting util-linux...
I: Extracting liblzma5...
I: Extracting xz-utils...
I: Extracting zlib1g...
I: Installing core packages...
I: Unpacking required packages...
I: Unpacking libacl1:amd64...
I: Unpacking libattr1:amd64...
I: Unpacking base-files...
I: Unpacking base-passwd...
I: Unpacking bash...
I: Unpacking libbz2-1.0:amd64...
I: Unpacking coreutils...
I: Unpacking dash...
I: Unpacking libdb5.1:amd64...
I: Unpacking debconf...
I: Unpacking debconf-i18n...
I: Unpacking debianutils...
I: Unpacking diffutils...
I: Unpacking dpkg...
I: Unpacking e2fslibs:amd64...
I: Unpacking e2fsprogs...
I: Unpacking libcomerr2:amd64...
I: Unpacking libss2:amd64...
I: Unpacking libc-bin...
I: Unpacking libc6:amd64...
I: Unpacking multiarch-support...
I: Unpacking findutils...
I: Unpacking gcc-4.7-base:amd64...
I: Unpacking libgcc1:amd64...
I: Unpacking grep...
I: Unpacking gzip...
I: Unpacking hostname...
I: Unpacking insserv...
I: Unpacking liblocale-gettext-perl...
I: Unpacking libselinux1:amd64...
I: Unpacking libsemanage-common...
I: Unpacking libsemanage1:amd64...
I: Unpacking libsepol1:amd64...
I: Unpacking libtext-charwidth-perl...
I: Unpacking libtext-iconv-perl...
I: Unpacking libtext-wrapi18n-perl...
I: Unpacking lsb-base...
I: Unpacking mawk...
I: Unpacking libncurses5:amd64...
I: Unpacking libtinfo5:amd64...
I: Unpacking ncurses-base...
I: Unpacking ncurses-bin...
I: Unpacking libpam-modules:amd64...
I: Unpacking libpam-modules-bin...
I: Unpacking libpam-runtime...
I: Unpacking libpam0g:amd64...
I: Unpacking perl-base...
I: Unpacking sed...
I: Unpacking sensible-utils...
I: Unpacking login...
I: Unpacking passwd...
I: Unpacking libslang2:amd64...
I: Unpacking initscripts...
I: Unpacking sysv-rc...
I: Unpacking sysvinit...
I: Unpacking sysvinit-utils...
I: Unpacking tar...
I: Unpacking tzdata...
I: Unpacking libustr-1.0-1:amd64...
I: Unpacking bsdutils...
I: Unpacking libblkid1:amd64...
I: Unpacking libmount1...
I: Unpacking libuuid1:amd64...
I: Unpacking mount...
I: Unpacking util-linux...
I: Unpacking liblzma5:amd64...
I: Unpacking xz-utils...
I: Unpacking zlib1g:amd64...
I: Configuring required packages...
I: Configuring lsb-base...
I: Configuring ncurses-base...
I: Configuring sensible-utils...
I: Configuring libsemanage-common...
I: Configuring gcc-4.7-base:amd64...
I: Configuring libc-bin...
I: Configuring libc6:amd64...
I: Configuring debianutils...
I: Configuring bsdutils...
I: Configuring tar...
I: Configuring base-passwd...
I: Configuring mawk...
I: Configuring hostname...
I: Configuring insserv...
I: Configuring multiarch-support...
I: Configuring libselinux1:amd64...
I: Configuring libustr-1.0-1:amd64...
I: Configuring libsepol1:amd64...
I: Configuring zlib1g:amd64...
I: Configuring libgcc1:amd64...
I: Configuring base-files...
I: Configuring libattr1:amd64...
I: Configuring e2fslibs:amd64...
I: Configuring libcomerr2:amd64...
I: Configuring libacl1:amd64...
I: Configuring libslang2:amd64...
I: Configuring libss2:amd64...
I: Configuring liblzma5:amd64...
I: Configuring libdb5.1:amd64...
I: Configuring libbz2-1.0:amd64...
I: Configuring libtinfo5:amd64...
I: Configuring sysvinit-utils...
I: Configuring ncurses-bin...
I: Configuring libsemanage1:amd64...
I: Configuring libncurses5:amd64...
I: Configuring xz-utils...
I: Configuring dpkg...
I: Configuring dash...
I: Configuring coreutils...
I: Configuring perl-base...
I: Configuring diffutils...
I: Configuring libtext-iconv-perl...
I: Configuring sed...
I: Configuring grep...
I: Configuring findutils...
I: Configuring gzip...
I: Configuring liblocale-gettext-perl...
I: Configuring bash...
I: Configuring libtext-charwidth-perl...
I: Configuring libtext-wrapi18n-perl...
I: Configuring debconf...
I: Configuring libpam0g:amd64...
I: Configuring sysv-rc...
I: Configuring tzdata...
I: Configuring debconf-i18n...
I: Configuring libpam-modules-bin...
I: Configuring libpam-modules:amd64...
I: Configuring passwd...
I: Configuring libpam-runtime...
I: Configuring login...
I: Configuring libuuid1:amd64...
I: Configuring libblkid1:amd64...
I: Configuring libmount1...
I: Configuring mount...
I: Configuring initscripts...
I: Configuring util-linux...
I: Configuring sysvinit...
I: Configuring e2fsprogs...
I: Unpacking the base system...
I: Unpacking apt...
I: Unpacking libapt-pkg4.12:amd64...
I: Unpacking debian-archive-keyring...
I: Unpacking libstdc++6:amd64...
I: Unpacking gnupg...
I: Unpacking gpgv...
I: Unpacking eatmydata...
I: Unpacking libusb-0.1-4:amd64...
I: Unpacking libreadline6:amd64...
I: Unpacking readline-common...
I: Configuring the base system...
I: Configuring gpgv...
I: Configuring libusb-0.1-4:amd64...
I: Configuring debian-archive-keyring...
I: Configuring eatmydata...
I: Configuring libstdc++6:amd64...
I: Configuring readline-common...
I: Configuring libapt-pkg4.12:amd64...
I: Configuring libreadline6:amd64...
I: Configuring gnupg...
I: Configuring apt...
I: Base system installed successfully.
4m11.9s DEBUG: Command ok: ['eatmydata', 'debootstrap', '--variant=minbase', '--keyring=/usr/share/keyrings/debian-archive-keyring.gpg', '--include=eatmydata', '--components=main,contrib,non-free', 'stable', '/tmp/tmp2hS8YO', 'http://http.debian.net/debian/']
4m11.9s DEBUG: Starting command: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'mount', '-t', 'proc', 'proc', '/proc']
4m11.9s DEBUG: Command ok: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'mount', '-t', 'proc', 'proc', '/proc']
4m12.4s DEBUG: Created policy-rc.d and chmodded it.
4m12.4s DEBUG: Starting command: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'apt-get', 'update']
4m17.8s DUMP:
Hit http://http.debian.net stable Release.gpg
Hit http://http.debian.net stable Release
Hit http://http.debian.net stable/main amd64 Packages
Hit http://http.debian.net stable/contrib amd64 Packages
Hit http://http.debian.net stable/non-free amd64 Packages
Get:1 http://http.debian.net stable/contrib Translation-en [34.8 kB]
Get:2 http://http.debian.net stable/main Translation-en [3852 kB]
Get:3 http://http.debian.net stable/non-free Translation-en [66.1 kB]
Fetched 3953 kB in 4s (910 kB/s)
Reading package lists...
4m17.8s DEBUG: Command ok: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'apt-get', 'update']
4m17.8s DEBUG: Created temporary file /tmp/tmpMkJuUA
4m17.8s DEBUG: Starting command: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'apt-get', 'clean']
4m18.9s DEBUG: Command ok: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'apt-get', 'clean']
4m18.9s DEBUG: Saving /tmp/tmp2hS8YO to /tmp/tmpMkJuUA.
4m18.9s DEBUG: Starting command: ['tar', '-czf', '/tmp/tmpMkJuUA', '--one-file-system', '--exclude', 'tmp/scripts', '-C', '/tmp/tmp2hS8YO', './']
5m21.3s DEBUG: Command ok: ['tar', '-czf', '/tmp/tmpMkJuUA', '--one-file-system', '--exclude', 'tmp/scripts', '-C', '/tmp/tmp2hS8YO', './']
5m21.3s DEBUG: Upgrading /tmp/tmp2hS8YO to unstable
5m21.3s DEBUG: Starting command: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'apt-get', 'update']
5m27.8s DUMP:
Get:1 http://http.debian.net unstable Release.gpg [1571 B]
Get:2 http://http.debian.net unstable Release [203 kB]
Get:3 http://http.debian.net unstable/main amd64 Packages [6439 kB]
Get:4 http://http.debian.net unstable/contrib amd64 Packages [49.0 kB]
Get:5 http://http.debian.net unstable/non-free amd64 Packages [85.2 kB]
Get:6 http://http.debian.net unstable/contrib Translation-en [40.0 kB]
Get:7 http://http.debian.net unstable/main Translation-en [4282 kB]
Get:8 http://http.debian.net unstable/non-free Translation-en [73.6 kB]
Fetched 11.2 MB in 5s (2099 kB/s)
Reading package lists...
5m27.8s DEBUG: Command ok: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'apt-get', 'update']
5m27.8s DEBUG: Starting command: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'apt-get', '-yf', 'dist-upgrade']
6m3.5s DUMP:
Reading package lists...
Building dependency tree...
The following NEW packages will be installed:
gcc-4.8-base libcap2 libpcre3
The following packages will be upgraded:
apt base-files bash bsdutils coreutils debconf debconf-i18n debianutils
diffutils dpkg e2fslibs e2fsprogs findutils gcc-4.7-base gnupg gpgv grep
gzip hostname initscripts libacl1 libapt-pkg4.12 libattr1 libblkid1 libc-bin
libc6 libcomerr2 libdb5.1 libgcc1 libmount1 libncurses5 libpam-modules
libpam-modules-bin libpam-runtime libpam0g libselinux1 libsemanage-common
libsemanage1 libsepol1 libss2 libstdc++6 libtinfo5 libusb-0.1-4 libuuid1
lsb-base mount multiarch-support ncurses-base ncurses-bin sed sensible-utils
sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g
58 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 28.3 MB of archives.
After this operation, 1369 kB of additional disk space will be used.
Get:1 http://http.debian.net/debian/ unstable/main base-files amd64 7.2 [78.6 kB]
Get:2 http://http.debian.net/debian/ unstable/main libattr1 amd64 1:2.4.47-1 [19.8 kB]
Get:3 http://http.debian.net/debian/ unstable/main libcap2 amd64 1:2.22-1.2 [13.6 kB]
Get:4 http://http.debian.net/debian/ unstable/main libc6 amd64 2.17-91 [2522 kB]
Get:5 http://http.debian.net/debian/ unstable/main libc-bin amd64 2.17-91 [747 kB]
Get:6 http://http.debian.net/debian/ unstable/main gcc-4.8-base amd64 4.8.1-8 [150 kB]
Get:7 http://http.debian.net/debian/ unstable/main libgcc1 amd64 1:4.8.1-8 [43.3 kB]
Get:8 http://http.debian.net/debian/ unstable/main sensible-utils all 0.0.9 [11.3 kB]
Get:9 http://http.debian.net/debian/ unstable/main debianutils amd64 4.4 [98.8 kB]
Get:10 http://http.debian.net/debian/ unstable/main bash amd64 4.2+dfsg-1 [1499 kB]
Get:11 http://http.debian.net/debian/ unstable/main coreutils amd64 8.21-1 [5585 kB]
Get:12 http://http.debian.net/debian/ unstable/main dpkg amd64 1.17.1 [2626 kB]
Get:13 http://http.debian.net/debian/ unstable/main diffutils amd64 1:3.2-8 [367 kB]
Get:14 http://http.debian.net/debian/ unstable/main e2fslibs amd64 1.42.8-1 [198 kB]
Get:15 http://http.debian.net/debian/ unstable/main e2fsprogs amd64 1.42.8-1 [993 kB]
Get:16 http://http.debian.net/debian/ unstable/main findutils amd64 4.4.2-6 [696 kB]
Get:17 http://http.debian.net/debian/ unstable/main grep amd64 2.14-2 [463 kB]
Get:18 http://http.debian.net/debian/ unstable/main gzip amd64 1.6-1 [121 kB]
Get:19 http://http.debian.net/debian/ unstable/main hostname amd64 3.13 [15.5 kB]
Get:20 http://http.debian.net/debian/ unstable/main mount amd64 2.20.1-5.5 [214 kB]
Get:21 http://http.debian.net/debian/ unstable/main libtinfo5 amd64 5.9+20130608-1 [295 kB]
Get:22 http://http.debian.net/debian/ unstable/main libncurses5 amd64 5.9+20130608-1 [113 kB]
Get:23 http://http.debian.net/debian/ unstable/main ncurses-bin amd64 5.9+20130608-1 [359 kB]
Get:24 http://http.debian.net/debian/ unstable/main sed amd64 4.2.2-2 [242 kB]
Get:25 http://http.debian.net/debian/ unstable/main libpcre3 amd64 1:8.31-2 [247 kB]
Get:26 http://http.debian.net/debian/ unstable/main libselinux1 amd64 2.1.13-2 [95.6 kB]
Get:27 http://http.debian.net/debian/ unstable/main libsepol1 amd64 2.1.9-2 [140 kB]
Get:28 http://http.debian.net/debian/ unstable/main sysvinit amd64 2.88dsf-43 [134 kB]
Get:29 http://http.debian.net/debian/ unstable/main tar amd64 1.26+dfsg-6 [984 kB]
Get:30 http://http.debian.net/debian/ unstable/main debconf all 1.5.50 [172 kB]
Get:31 http://http.debian.net/debian/ unstable/main sysvinit-utils amd64 2.88dsf-43 [103 kB]
Get:32 http://http.debian.net/debian/ unstable/main sysv-rc all 2.88dsf-43 [80.5 kB]
Get:33 http://http.debian.net/debian/ unstable/main lsb-base all 4.1+Debian12 [26.8 kB]
Get:34 http://http.debian.net/debian/ unstable/main initscripts amd64 2.88dsf-43 [87.2 kB]
Get:35 http://http.debian.net/debian/ unstable/main tzdata all 2013d-1 [218 kB]
Get:36 http://http.debian.net/debian/ unstable/main util-linux amd64 2.20.1-5.5 [663 kB]
Get:37 http://http.debian.net/debian/ unstable/main libstdc++6 amd64 4.8.1-8 [325 kB]
Get:38 http://http.debian.net/debian/ unstable/main zlib1g amd64 1:1.2.8.dfsg-1 [90.7 kB]
Get:39 http://http.debian.net/debian/ unstable/main libapt-pkg4.12 amd64 0.9.9.4 [928 kB]
Get:40 http://http.debian.net/debian/ unstable/main libusb-0.1-4 amd64 2:0.1.12-23.2 [23.3 kB]
Get:41 http://http.debian.net/debian/ unstable/main gpgv amd64 1.4.14-1 [226 kB]
Get:42 http://http.debian.net/debian/ unstable/main gnupg amd64 1.4.14-1 [1987 kB]
Get:43 http://http.debian.net/debian/ unstable/main apt amd64 0.9.9.4 [1328 kB]
Get:44 http://http.debian.net/debian/ unstable/main bsdutils amd64 1:2.20.1-5.5 [85.5 kB]
Get:45 http://http.debian.net/debian/ unstable/main ncurses-base all 5.9+20130608-1 [217 kB]
Get:46 http://http.debian.net/debian/ unstable/main libacl1 amd64 2.2.52-1 [30.2 kB]
Get:47 http://http.debian.net/debian/ unstable/main libuuid1 amd64 2.20.1-5.5 [57.2 kB]
Get:48 http://http.debian.net/debian/ unstable/main libblkid1 amd64 2.20.1-5.5 [120 kB]
Get:49 http://http.debian.net/debian/ unstable/main libcomerr2 amd64 1.42.8-1 [57.1 kB]
Get:50 http://http.debian.net/debian/ unstable/main libmount1 amd64 2.20.1-5.5 [120 kB]
Get:51 http://http.debian.net/debian/ unstable/main libpam0g amd64 1.1.3-9 [129 kB]
Get:52 http://http.debian.net/debian/ unstable/main libpam-modules-bin amd64 1.1.3-9 [118 kB]
Get:53 http://http.debian.net/debian/ unstable/main libpam-modules amd64 1.1.3-9 [349 kB]
Get:54 http://http.debian.net/debian/ unstable/main libss2 amd64 1.42.8-1 [62.2 kB]
Get:55 http://http.debian.net/debian/ unstable/main libdb5.1 amd64 5.1.29-6 [717 kB]
Get:56 http://http.debian.net/debian/ unstable/main libsemanage-common all 2.1.10-2 [24.0 kB]
Get:57 http://http.debian.net/debian/ unstable/main libsemanage1 amd64 2.1.10-2 [102 kB]
Get:58 http://http.debian.net/debian/ unstable/main libpam-runtime all 1.1.3-9 [222 kB]
Get:59 http://http.debian.net/debian/ unstable/main multiarch-support amd64 2.17-91 [161 kB]
Get:60 http://http.debian.net/debian/ unstable/main debconf-i18n all 1.5.50 [237 kB]
Get:61 http://http.debian.net/debian/ unstable/main gcc-4.7-base amd64 4.7.3-6 [149 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 28.3 MB in 20s (1353 kB/s)
(Reading database ... 6624 files and directories currently installed.)
Preparing to replace base-files 7.1wheezy1 (using .../base-files_7.2_amd64.deb) ...
Unpacking replacement base-files ...
Setting up base-files (7.2) ...
Installing new version of config file /etc/debian_version ...
Installing new version of config file /etc/issue ...
Installing new version of config file /etc/issue.net ...
Installing new version of config file /etc/os-release ...
(Reading database ... 6624 files and directories currently installed.)
Preparing to replace libattr1:amd64 1:2.4.46-8 (using .../libattr1_1%3a2.4.47-1_amd64.deb) ...
Unpacking replacement libattr1:amd64 ...
Setting up libattr1:amd64 (1:2.4.47-1) ...
Selecting previously unselected package libcap2:amd64.
(Reading database ... 6624 files and directories currently installed.)
Unpacking libcap2:amd64 (from .../libcap2_1%3a2.22-1.2_amd64.deb) ...
Setting up libcap2:amd64 (1:2.22-1.2) ...
(Reading database ... 6630 files and directories currently installed.)
Preparing to replace libc6:amd64 2.13-38 (using .../libc6_2.17-91_amd64.deb) ...
Checking for services that may need to be restarted...
Checking init scripts...
Configuring libc6
-----------------
xscreensaver and xlockmore must be restarted before upgrading
One or more running instances of xscreensaver or xlockmore have been
detected on this system. Because of incompatible library changes, the
upgrade of the GNU libc library will leave you unable to authenticate to
these programs. You should arrange for these programs to be restarted or
stopped before continuing this upgrade, to avoid locking your users out of
their current sessions.
Unpacking replacement libc6:amd64 ...
Setting up libc6:amd64 (2.17-91) ...
Checking for services that may need to be restarted...
Checking init scripts...
Nothing to restart.
(Reading database ... 6633 files and directories currently installed.)
Preparing to replace libc-bin 2.13-38 (using .../libc-bin_2.17-91_amd64.deb) ...
Unpacking replacement libc-bin ...
Setting up libc-bin (2.17-91) ...
Installing new version of config file /etc/gai.conf ...
Selecting previously unselected package gcc-4.8-base:amd64.
(Reading database ... 6628 files and directories currently installed.)
Unpacking gcc-4.8-base:amd64 (from .../gcc-4.8-base_4.8.1-8_amd64.deb) ...
Setting up gcc-4.8-base:amd64 (4.8.1-8) ...
(Reading database ... 6635 files and directories currently installed.)
Preparing to replace libgcc1:amd64 1:4.7.2-5 (using .../libgcc1_1%3a4.8.1-8_amd64.deb) ...
Unpacking replacement libgcc1:amd64 ...
Setting up libgcc1:amd64 (1:4.8.1-8) ...
Processing triggers for libc-bin ...
(Reading database ... 6635 files and directories currently installed.)
Preparing to replace sensible-utils 0.0.7 (using .../sensible-utils_0.0.9_all.deb) ...
Unpacking replacement sensible-utils ...
Setting up sensible-utils (0.0.9) ...
(Reading database ... 6637 files and directories currently installed.)
Preparing to replace debianutils 4.3.2 (using .../debianutils_4.4_amd64.deb) ...
Unpacking replacement debianutils ...
Setting up debianutils (4.4) ...
(Reading database ... 6658 files and directories currently installed.)
Preparing to replace bash 4.2+dfsg-0.1 (using .../bash_4.2+dfsg-1_amd64.deb) ...
Unpacking replacement bash ...
Setting up bash (4.2+dfsg-1) ...
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
(Reading database ... 6658 files and directories currently installed.)
Preparing to replace coreutils 8.13-3.5 (using .../coreutils_8.21-1_amd64.deb) ...
Unpacking replacement coreutils ...
Setting up coreutils (8.21-1) ...
(Reading database ... 6664 files and directories currently installed.)
Preparing to replace dpkg 1.16.10 (using .../archives/dpkg_1.17.1_amd64.deb) ...
Unpacking replacement dpkg ...
Setting up dpkg (1.17.1) ...
(Reading database ... 6656 files and directories currently installed.)
Preparing to replace diffutils 1:3.2-6 (using .../diffutils_1%3a3.2-8_amd64.deb) ...
Unpacking replacement diffutils ...
Setting up diffutils (1:3.2-8) ...
(Reading database ... 6656 files and directories currently installed.)
Preparing to replace e2fslibs:amd64 1.42.5-1.1 (using .../e2fslibs_1.42.8-1_amd64.deb) ...
Unpacking replacement e2fslibs:amd64 ...
Setting up e2fslibs:amd64 (1.42.8-1) ...
Processing triggers for libc-bin ...
(Reading database ... 6656 files and directories currently installed.)
Preparing to replace e2fsprogs 1.42.5-1.1 (using .../e2fsprogs_1.42.8-1_amd64.deb) ...
Unpacking replacement e2fsprogs ...
Setting up e2fsprogs (1.42.8-1) ...
(Reading database ... 6656 files and directories currently installed.)
Preparing to replace findutils 4.4.2-4 (using .../findutils_4.4.2-6_amd64.deb) ...
Unpacking replacement findutils ...
Setting up findutils (4.4.2-6) ...
(Reading database ... 6656 files and directories currently installed.)
Preparing to replace grep 2.12-2 (using .../archives/grep_2.14-2_amd64.deb) ...
Unpacking replacement grep ...
Setting up grep (2.14-2) ...
(Reading database ... 6657 files and directories currently installed.)
Preparing to replace gzip 1.5-1.1 (using .../archives/gzip_1.6-1_amd64.deb) ...
Unpacking replacement gzip ...
Setting up gzip (1.6-1) ...
(Reading database ... 6657 files and directories currently installed.)
Preparing to replace hostname 3.11 (using .../hostname_3.13_amd64.deb) ...
Unpacking replacement hostname ...
Setting up hostname (3.13) ...
(Reading database ... 6657 files and directories currently installed.)
Preparing to replace mount 2.20.1-5.3 (using .../mount_2.20.1-5.5_amd64.deb) ...
Unpacking replacement mount ...
Setting up mount (2.20.1-5.5) ...
(Reading database ... 6657 files and directories currently installed.)
Preparing to replace libtinfo5:amd64 5.9-10 (using .../libtinfo5_5.9+20130608-1_amd64.deb) ...
Unpacking replacement libtinfo5:amd64 ...
Setting up libtinfo5:amd64 (5.9+20130608-1) ...
Processing triggers for libc-bin ...
(Reading database ... 6657 files and directories currently installed.)
Preparing to replace libncurses5:amd64 5.9-10 (using .../libncurses5_5.9+20130608-1_amd64.deb) ...
Unpacking replacement libncurses5:amd64 ...
Setting up libncurses5:amd64 (5.9+20130608-1) ...
Processing triggers for libc-bin ...
(Reading database ... 6657 files and directories currently installed.)
Preparing to replace ncurses-bin 5.9-10 (using .../ncurses-bin_5.9+20130608-1_amd64.deb) ...
Unpacking replacement ncurses-bin ...
Setting up ncurses-bin (5.9+20130608-1) ...
(Reading database ... 6655 files and directories currently installed.)
Preparing to replace sed 4.2.1-10 (using .../archives/sed_4.2.2-2_amd64.deb) ...
Unpacking replacement sed ...
Setting up sed (4.2.2-2) ...
Selecting previously unselected package libpcre3:amd64.
(Reading database ... 6657 files and directories currently installed.)
Unpacking libpcre3:amd64 (from .../libpcre3_1%3a8.31-2_amd64.deb) ...
Setting up libpcre3:amd64 (1:8.31-2) ...
Processing triggers for libc-bin ...
(Reading database ... 6670 files and directories currently installed.)
Preparing to replace libselinux1:amd64 2.1.9-5 (using .../libselinux1_2.1.13-2_amd64.deb) ...
Unpacking replacement libselinux1:amd64 ...
Setting up libselinux1:amd64 (2.1.13-2) ...
Processing triggers for libc-bin ...
(Reading database ... 6668 files and directories currently installed.)
Preparing to replace libsepol1:amd64 2.1.4-3 (using .../libsepol1_2.1.9-2_amd64.deb) ...
Unpacking replacement libsepol1:amd64 ...
Setting up libsepol1:amd64 (2.1.9-2) ...
Processing triggers for libc-bin ...
(Reading database ... 6668 files and directories currently installed.)
Preparing to replace sysvinit 2.88dsf-41 (using .../sysvinit_2.88dsf-43_amd64.deb) ...
Unpacking replacement sysvinit ...
Setting up sysvinit (2.88dsf-43) ...
Not restarting sysvinit
(Reading database ... 6668 files and directories currently installed.)
Preparing to replace tar 1.26+dfsg-0.1 (using .../tar_1.26+dfsg-6_amd64.deb) ...
Unpacking replacement tar ...
Setting up tar (1.26+dfsg-6) ...
(Reading database ... 6670 files and directories currently installed.)
Preparing to replace debconf 1.5.49 (using .../debconf_1.5.50_all.deb) ...
Unpacking replacement debconf ...
Setting up debconf (1.5.50) ...
(Reading database ... 6670 files and directories currently installed.)
Preparing to replace sysvinit-utils 2.88dsf-41 (using .../sysvinit-utils_2.88dsf-43_amd64.deb) ...
Unpacking replacement sysvinit-utils ...
Setting up sysvinit-utils (2.88dsf-43) ...
(Reading database ... 6670 files and directories currently installed.)
Preparing to replace sysv-rc 2.88dsf-41 (using .../sysv-rc_2.88dsf-43_all.deb) ...
Unpacking replacement sysv-rc ...
Setting up sysv-rc (2.88dsf-43) ...
(Reading database ... 6670 files and directories currently installed.)
Preparing to replace lsb-base 4.1+Debian8+deb7u1 (using .../lsb-base_4.1+Debian12_all.deb) ...
Unpacking replacement lsb-base ...
Setting up lsb-base (4.1+Debian12) ...
(Reading database ... 6670 files and directories currently installed.)
Preparing to replace initscripts 2.88dsf-41 (using .../initscripts_2.88dsf-43_amd64.deb) ...
Removing unmodified and obsolete conffile /etc/init.d/mtab.sh ...
Unpacking replacement initscripts ...
Setting up initscripts (2.88dsf-43) ...
Installing new version of config file /etc/init.d/bootmisc.sh ...
Installing new version of config file /etc/init.d/checkfs.sh ...
Installing new version of config file /etc/init.d/checkroot.sh ...
Installing new version of config file /etc/init.d/checkroot-bootclean.sh ...
Installing new version of config file /etc/init.d/mountdevsubfs.sh ...
Installing new version of config file /etc/init.d/mountkernfs.sh ...
Installing new version of config file /etc/init.d/rmnologin ...
Installing new version of config file /etc/network/if-up.d/mountnfs ...
(Reading database ... 6669 files and directories currently installed.)
Preparing to replace tzdata 2013c-0wheezy1 (using .../tzdata_2013d-1_all.deb) ...
Unpacking replacement tzdata ...
Setting up tzdata (2013d-1) ...
Current default time zone: 'Etc/UTC'
Local time is now: Fri Aug 2 04:36:59 UTC 2013.
Universal Time is now: Fri Aug 2 04:36:59 UTC 2013.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
(Reading database ... 6669 files and directories currently installed.)
Preparing to replace util-linux 2.20.1-5.3 (using .../util-linux_2.20.1-5.5_amd64.deb) ...
Unpacking replacement util-linux ...
Setting up util-linux (2.20.1-5.5) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
(Reading database ... 6669 files and directories currently installed.)
Preparing to replace libstdc++6:amd64 4.7.2-5 (using .../libstdc++6_4.8.1-8_amd64.deb) ...
Unpacking replacement libstdc++6:amd64 ...
Setting up libstdc++6:amd64 (4.8.1-8) ...
Processing triggers for libc-bin ...
(Reading database ... 6669 files and directories currently installed.)
Preparing to replace zlib1g:amd64 1:1.2.7.dfsg-13 (using .../zlib1g_1%3a1.2.8.dfsg-1_amd64.deb) ...
Unpacking replacement zlib1g:amd64 ...
Setting up zlib1g:amd64 (1:1.2.8.dfsg-1) ...
Processing triggers for libc-bin ...
(Reading database ... 6669 files and directories currently installed.)
Preparing to replace libapt-pkg4.12:amd64 0.9.7.9 (using .../libapt-pkg4.12_0.9.9.4_amd64.deb) ...
Unpacking replacement libapt-pkg4.12:amd64 ...
Setting up libapt-pkg4.12:amd64 (0.9.9.4) ...
Processing triggers for libc-bin ...
(Reading database ... 6669 files and directories currently installed.)
Preparing to replace libusb-0.1-4:amd64 2:0.1.12-20+nmu1 (using .../libusb-0.1-4_2%3a0.1.12-23.2_amd64.deb) ...
Unpacking replacement libusb-0.1-4:amd64 ...
Setting up libusb-0.1-4:amd64 (2:0.1.12-23.2) ...
Processing triggers for libc-bin ...
(Reading database ... 6669 files and directories currently installed.)
Preparing to replace gpgv 1.4.12-7 (using .../gpgv_1.4.14-1_amd64.deb) ...
Unpacking replacement gpgv ...
Setting up gpgv (1.4.14-1) ...
(Reading database ... 6669 files and directories currently installed.)
Preparing to replace gnupg 1.4.12-7 (using .../gnupg_1.4.14-1_amd64.deb) ...
Unpacking replacement gnupg ...
Setting up gnupg (1.4.14-1) ...
(Reading database ... 6669 files and directories currently installed.)
Preparing to replace apt 0.9.7.9 (using .../archives/apt_0.9.9.4_amd64.deb) ...
Unpacking replacement apt ...
Setting up apt (0.9.9.4) ...
Installing new version of config file /etc/apt/apt.conf.d/01autoremove ...
Installing new version of config file /etc/cron.daily/apt ...
gpg: key B98321F9: "Squeeze Stable Release Key <debian-release at lists.debian.org>" not changed
gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster at debian.org>" not changed
gpg: key 65FFB764: "Wheezy Stable Release Key <debian-release at lists.debian.org>" not changed
gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) <ftpmaster at debian.org>" not changed
gpg: Total number processed: 4
gpg: unchanged: 4
dpkg-query: no packages found matching linux-image-[0-9]*
(Reading database ... 6689 files and directories currently installed.)
Preparing to replace bsdutils 1:2.20.1-5.3 (using .../bsdutils_1%3a2.20.1-5.5_amd64.deb) ...
Unpacking replacement bsdutils ...
Setting up bsdutils (1:2.20.1-5.5) ...
(Reading database ... 6689 files and directories currently installed.)
Preparing to replace ncurses-base 5.9-10 (using .../ncurses-base_5.9+20130608-1_all.deb) ...
Unpacking replacement ncurses-base ...
Setting up ncurses-base (5.9+20130608-1) ...
(Reading database ... 6689 files and directories currently installed.)
Preparing to replace libacl1:amd64 2.2.51-8 (using .../libacl1_2.2.52-1_amd64.deb) ...
Unpacking replacement libacl1:amd64 ...
Setting up libacl1:amd64 (2.2.52-1) ...
Processing triggers for libc-bin ...
(Reading database ... 6689 files and directories currently installed.)
Preparing to replace libuuid1:amd64 2.20.1-5.3 (using .../libuuid1_2.20.1-5.5_amd64.deb) ...
Unpacking replacement libuuid1:amd64 ...
Setting up libuuid1:amd64 (2.20.1-5.5) ...
Processing triggers for libc-bin ...
(Reading database ... 6689 files and directories currently installed.)
Preparing to replace libblkid1:amd64 2.20.1-5.3 (using .../libblkid1_2.20.1-5.5_amd64.deb) ...
Unpacking replacement libblkid1:amd64 ...
Setting up libblkid1:amd64 (2.20.1-5.5) ...
Processing triggers for libc-bin ...
(Reading database ... 6689 files and directories currently installed.)
Preparing to replace libcomerr2:amd64 1.42.5-1.1 (using .../libcomerr2_1.42.8-1_amd64.deb) ...
Unpacking replacement libcomerr2:amd64 ...
Setting up libcomerr2:amd64 (1.42.8-1) ...
Processing triggers for libc-bin ...
(Reading database ... 6689 files and directories currently installed.)
Preparing to replace libmount1 2.20.1-5.3 (using .../libmount1_2.20.1-5.5_amd64.deb) ...
Unpacking replacement libmount1 ...
Setting up libmount1 (2.20.1-5.5) ...
Processing triggers for libc-bin ...
(Reading database ... 6689 files and directories currently installed.)
Preparing to replace libpam0g:amd64 1.1.3-7.1 (using .../libpam0g_1.1.3-9_amd64.deb) ...
Unpacking replacement libpam0g:amd64 ...
Setting up libpam0g:amd64 (1.1.3-9) ...
Processing triggers for libc-bin ...
(Reading database ... 6689 files and directories currently installed.)
Preparing to replace libpam-modules-bin 1.1.3-7.1 (using .../libpam-modules-bin_1.1.3-9_amd64.deb) ...
Unpacking replacement libpam-modules-bin ...
Replacing files in old package libpam-modules:amd64 ...
Setting up libpam-modules-bin (1.1.3-9) ...
(Reading database ... 6690 files and directories currently installed.)
Preparing to replace libpam-modules:amd64 1.1.3-7.1 (using .../libpam-modules_1.1.3-9_amd64.deb) ...
Unpacking replacement libpam-modules:amd64 ...
Setting up libpam-modules:amd64 (1.1.3-9) ...
(Reading database ... 6690 files and directories currently installed.)
Preparing to replace libss2:amd64 1.42.5-1.1 (using .../libss2_1.42.8-1_amd64.deb) ...
Unpacking replacement libss2:amd64 ...
Setting up libss2:amd64 (1.42.8-1) ...
Processing triggers for libc-bin ...
(Reading database ... 6690 files and directories currently installed.)
Preparing to replace libdb5.1:amd64 5.1.29-5 (using .../libdb5.1_5.1.29-6_amd64.deb) ...
Unpacking replacement libdb5.1:amd64 ...
Setting up libdb5.1:amd64 (5.1.29-6) ...
Processing triggers for libc-bin ...
(Reading database ... 6690 files and directories currently installed.)
Preparing to replace libsemanage-common 2.1.6-6 (using .../libsemanage-common_2.1.10-2_all.deb) ...
Unpacking replacement libsemanage-common ...
Setting up libsemanage-common (2.1.10-2) ...
(Reading database ... 6690 files and directories currently installed.)
Preparing to replace libsemanage1:amd64 2.1.6-6 (using .../libsemanage1_2.1.10-2_amd64.deb) ...
Unpacking replacement libsemanage1:amd64 ...
Setting up libsemanage1:amd64 (2.1.10-2) ...
Processing triggers for libc-bin ...
(Reading database ... 6690 files and directories currently installed.)
Preparing to replace libpam-runtime 1.1.3-7.1 (using .../libpam-runtime_1.1.3-9_all.deb) ...
Unpacking replacement libpam-runtime ...
Setting up libpam-runtime (1.1.3-9) ...
(Reading database ... 6690 files and directories currently installed.)
Preparing to replace multiarch-support 2.13-38 (using .../multiarch-support_2.17-91_amd64.deb) ...
Unpacking replacement multiarch-support ...
Setting up multiarch-support (2.17-91) ...
(Reading database ... 6690 files and directories currently installed.)
Preparing to replace debconf-i18n 1.5.49 (using .../debconf-i18n_1.5.50_all.deb) ...
Unpacking replacement debconf-i18n ...
Preparing to replace gcc-4.7-base:amd64 4.7.2-5 (using .../gcc-4.7-base_4.7.3-6_amd64.deb) ...
Unpacking replacement gcc-4.7-base:amd64 ...
Setting up debconf-i18n (1.5.50) ...
Setting up gcc-4.7-base:amd64 (4.7.3-6) ...
6m3.5s DEBUG: Command ok: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'apt-get', '-yf', 'dist-upgrade']
6m3.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/tmp/tmp2hS8YO']
6m4.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/tmp/tmp2hS8YO']
6m4.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/tmp/tmp2hS8YO']
6m4.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/tmp/tmp2hS8YO']
6m4.5s DEBUG: Starting command: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'apt-get', 'clean']
6m4.6s DEBUG: Command ok: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'apt-get', 'clean']
6m5.7s DEBUG: Starting command: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'dpkg', '--get-selections', '*']
6m5.7s DUMP:
apt install
base-files install
base-passwd install
bash install
bsdutils install
coreutils install
dash install
debconf install
debconf-i18n install
debian-archive-keyring install
debianutils install
diffutils install
dpkg install
e2fslibs:amd64 install
e2fsprogs install
eatmydata install
findutils install
gcc-4.7-base:amd64 install
gcc-4.8-base:amd64 install
gnupg install
gpgv install
grep install
gzip install
hostname install
initscripts install
insserv install
libacl1:amd64 install
libapt-pkg4.12:amd64 install
libattr1:amd64 install
libblkid1:amd64 install
libbz2-1.0:amd64 install
libc-bin install
libc6:amd64 install
libcap2:amd64 install
libcomerr2:amd64 install
libdb5.1:amd64 install
libgcc1:amd64 install
liblocale-gettext-perl install
liblzma5:amd64 install
libmount1 install
libncurses5:amd64 install
libpam-modules:amd64 install
libpam-modules-bin install
libpam-runtime install
libpam0g:amd64 install
libpcre3:amd64 install
libreadline6:amd64 install
libselinux1:amd64 install
libsemanage-common install
libsemanage1:amd64 install
libsepol1:amd64 install
libslang2:amd64 install
libss2:amd64 install
libstdc++6:amd64 install
libtext-charwidth-perl install
libtext-iconv-perl install
libtext-wrapi18n-perl install
libtinfo5:amd64 install
libusb-0.1-4:amd64 install
libustr-1.0-1:amd64 install
libuuid1:amd64 install
login install
lsb-base install
mawk install
mount install
multiarch-support install
ncurses-base install
ncurses-bin install
passwd install
perl-base install
readline-common install
sed install
sensible-utils install
sysv-rc install
sysvinit install
sysvinit-utils install
tar install
tzdata install
util-linux install
xz-utils install
zlib1g:amd64 install
6m5.7s DEBUG: Command ok: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'dpkg', '--get-selections', '*']
6m5.7s DEBUG: Starting command: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'dpkg-divert', '--list']
6m5.7s DUMP:
diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash
diversion of /bin/sh to /bin/sh.distrib by dash
6m5.7s DEBUG: Command ok: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'dpkg-divert', '--list']
6m6.2s DEBUG: Starting command: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'umount', '/proc']
6m6.2s DEBUG: Command ok: ['chroot', '/tmp/tmp2hS8YO', 'eatmydata', 'umount', '/proc']
6m6.4s DEBUG: Removed directory tree at /tmp/tmp2hS8YO
6m6.4s INFO: Notice: package selections and meta data from target distro saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it.
6m6.4s DEBUG: Created temporary directory /tmp/tmpTNTx4a
6m6.4s DEBUG: Unpacking /tmp/tmpMkJuUA into /tmp/tmpTNTx4a
6m6.4s DEBUG: Starting command: ['eatmydata', 'tar', '-C', '/tmp/tmpTNTx4a', '-zxf', '/tmp/tmpMkJuUA']
6m8.0s DEBUG: Command ok: ['eatmydata', 'tar', '-C', '/tmp/tmpTNTx4a', '-zxf', '/tmp/tmpMkJuUA']
6m8.0s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'mount', '-t', 'proc', 'proc', '/proc']
6m8.0s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'mount', '-t', 'proc', 'proc', '/proc']
6m8.5s DEBUG: Created policy-rc.d and chmodded it.
6m8.5s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', 'update']
6m12.3s DUMP:
Hit http://http.debian.net stable Release.gpg
Hit http://http.debian.net stable Release
Hit http://http.debian.net stable/main amd64 Packages
Hit http://http.debian.net stable/contrib amd64 Packages
Hit http://http.debian.net stable/non-free amd64 Packages
Hit http://http.debian.net stable/contrib Translation-en
Hit http://http.debian.net stable/main Translation-en
Hit http://http.debian.net stable/non-free Translation-en
Reading package lists...
6m12.3s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', 'update']
6m12.3s DEBUG: Removing /tmp/tmpMkJuUA
6m12.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
6m12.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
6m12.7s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filters']
6m12.7s DUMP:
E: No packages found
6m12.7s DEBUG: Command failed (status=100), but ignoring error: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filters']
6m12.7s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filters-doc']
6m12.7s DUMP:
E: No packages found
6m12.7s DEBUG: Command failed (status=100), but ignoring error: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filters-doc']
6m12.7s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'django-filter']
6m12.8s DUMP:
Package: django-filter
Version: 0.5.3-3
Installed-Size: 104
Maintainer: Brian May <bam at debian.org>
Architecture: all
Depends: python, python-support (>= 0.90.0), python-django
Description-en: Django library for filtering Django QuerySets based on user selections
A reusable Django application for allowing programmers to filter queryset
dynamically.
Homepage: http://github.com/alex/django-filter
Description-md5: 8584cb403801d61fb61761ab9bda5288
Section: python
Priority: optional
Filename: pool/main/d/django-filter/django-filter_0.5.3-3_all.deb
Size: 13560
MD5sum: 5fac3f21cc94e0bb291ccaf5df125490
SHA1: 469668f4b1b4ffcbde7141a1b7642fd32dd219bc
SHA256: 861f9413c1fb977a906e0851e1f5f562fc7d2e6503c24126837c28e08589f523
6m12.8s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'django-filter']
6m12.8s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filter']
6m12.8s DUMP:
E: No packages found
6m12.8s DEBUG: Command failed (status=100), but ignoring error: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filter']
6m12.8s INFO: apt-cache knows about the following packages: django-filter
6m12.8s INFO: the following packages are not in the archive: python-django-filters, python-django-filters-doc, python-django-filter
6m12.8s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'policy']
6m12.8s DUMP:
Package files:
100 /var/lib/dpkg/status
release a=now
500 http://http.debian.net/debian/ stable/non-free Translation-en
500 http://http.debian.net/debian/ stable/main Translation-en
500 http://http.debian.net/debian/ stable/contrib Translation-en
500 http://http.debian.net/debian/ stable/non-free amd64 Packages
release v=7.1,o=Debian,a=stable,n=wheezy,l=Debian,c=non-free
origin http.debian.net
500 http://http.debian.net/debian/ stable/contrib amd64 Packages
release v=7.1,o=Debian,a=stable,n=wheezy,l=Debian,c=contrib
origin http.debian.net
500 http://http.debian.net/debian/ stable/main amd64 Packages
release v=7.1,o=Debian,a=stable,n=wheezy,l=Debian,c=main
origin http.debian.net
Pinned packages:
6m12.8s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'policy']
6m12.8s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'policy', 'django-filter']
6m12.8s DUMP:
django-filter:
Installed: (none)
Candidate: 0.5.3-3
Version table:
0.5.3-3 0
500 http://http.debian.net/debian/ stable/main amd64 Packages
6m12.8s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'policy', 'django-filter']
6m12.8s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', '-y', 'install', 'django-filter']
6m32.0s DUMP:
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
libexpat1 libncursesw5 libsqlite3-0 libssl1.0.0 mime-support python
python-django python-minimal python-support python2.7 python2.7-minimal
Suggested packages:
python-doc python-tk python-psycopg2 python-psycopg python-mysqldb
python-flup python-sqlite python-yaml geoip-database-contrib gettext
python2.7-doc binutils binfmt-support
Recommended packages:
libgpm2 file libjs-jquery
The following NEW packages will be installed:
django-filter libexpat1 libncursesw5 libsqlite3-0 libssl1.0.0 mime-support
python python-django python-minimal python-support python2.7
python2.7-minimal
0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded.
Need to get 12.1 MB of archives.
After this operation, 72.8 MB of additional disk space will be used.
Get:1 http://http.debian.net/debian/ stable/main libncursesw5 amd64 5.9-10 [141 kB]
Get:2 http://http.debian.net/debian/ stable/main libssl1.0.0 amd64 1.0.1e-2 [1219 kB]
Get:3 http://http.debian.net/debian/ stable/main libsqlite3-0 amd64 3.7.13-1+deb7u1 [455 kB]
Get:4 http://http.debian.net/debian/ stable/main libexpat1 amd64 2.1.0-1 [141 kB]
Get:5 http://http.debian.net/debian/ stable/main mime-support all 3.52-1 [35.5 kB]
Get:6 http://http.debian.net/debian/ stable/main python2.7-minimal amd64 2.7.3-6 [1783 kB]
Get:7 http://http.debian.net/debian/ stable/main python2.7 amd64 2.7.3-6 [2729 kB]
Get:8 http://http.debian.net/debian/ stable/main python-minimal all 2.7.3-4 [42.6 kB]
Get:9 http://http.debian.net/debian/ stable/main python all 2.7.3-4 [180 kB]
Get:10 http://http.debian.net/debian/ stable/main python-support all 1.0.15 [33.6 kB]
Get:11 http://http.debian.net/debian/ stable/main python-django all 1.4.5-1 [5367 kB]
Get:12 http://http.debian.net/debian/ stable/main django-filter all 0.5.3-3 [13.6 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 12.1 MB in 4s (2761 kB/s)
Selecting previously unselected package libncursesw5:amd64.
(Reading database ... 6624 files and directories currently installed.)
Unpacking libncursesw5:amd64 (from .../libncursesw5_5.9-10_amd64.deb) ...
Selecting previously unselected package libssl1.0.0:amd64.
Unpacking libssl1.0.0:amd64 (from .../libssl1.0.0_1.0.1e-2_amd64.deb) ...
Selecting previously unselected package libsqlite3-0:amd64.
Unpacking libsqlite3-0:amd64 (from .../libsqlite3-0_3.7.13-1+deb7u1_amd64.deb) ...
Selecting previously unselected package libexpat1:amd64.
Unpacking libexpat1:amd64 (from .../libexpat1_2.1.0-1_amd64.deb) ...
Selecting previously unselected package mime-support.
Unpacking mime-support (from .../mime-support_3.52-1_all.deb) ...
Selecting previously unselected package python2.7-minimal.
Unpacking python2.7-minimal (from .../python2.7-minimal_2.7.3-6_amd64.deb) ...
Selecting previously unselected package python2.7.
Unpacking python2.7 (from .../python2.7_2.7.3-6_amd64.deb) ...
Selecting previously unselected package python-minimal.
Unpacking python-minimal (from .../python-minimal_2.7.3-4_all.deb) ...
Selecting previously unselected package python.
Unpacking python (from .../python_2.7.3-4_all.deb) ...
Selecting previously unselected package python-support.
Unpacking python-support (from .../python-support_1.0.15_all.deb) ...
Selecting previously unselected package python-django.
Unpacking python-django (from .../python-django_1.4.5-1_all.deb) ...
Selecting previously unselected package django-filter.
Unpacking django-filter (from .../django-filter_0.5.3-3_all.deb) ...
Setting up libncursesw5:amd64 (5.9-10) ...
Setting up libssl1.0.0:amd64 (1.0.1e-2) ...
Setting up libsqlite3-0:amd64 (3.7.13-1+deb7u1) ...
Setting up libexpat1:amd64 (2.1.0-1) ...
Setting up mime-support (3.52-1) ...
update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode
Setting up python2.7-minimal (2.7.3-6) ...
Setting up python2.7 (2.7.3-6) ...
Setting up python-minimal (2.7.3-4) ...
Setting up python (2.7.3-4) ...
Setting up python-support (1.0.15) ...
Setting up python-django (1.4.5-1) ...
Setting up django-filter (0.5.3-3) ...
Processing triggers for python-support ...
6m32.0s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', '-y', 'install', 'django-filter']
6m32.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
6m34.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
6m34.1s DEBUG: Upgrading /tmp/tmpTNTx4a to unstable
6m34.1s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', 'update']
6m40.2s DUMP:
Get:1 http://http.debian.net unstable Release.gpg [1571 B]
Get:2 http://http.debian.net unstable Release [203 kB]
Get:3 http://http.debian.net unstable/main amd64 Packages [6439 kB]
Get:4 http://http.debian.net unstable/contrib amd64 Packages [49.0 kB]
Get:5 http://http.debian.net unstable/non-free amd64 Packages [85.2 kB]
Get:6 http://http.debian.net unstable/contrib Translation-en [40.0 kB]
Get:7 http://http.debian.net unstable/main Translation-en [4282 kB]
Get:8 http://http.debian.net unstable/non-free Translation-en [73.6 kB]
Fetched 11.2 MB in 5s (2192 kB/s)
Reading package lists...
6m40.2s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', 'update']
6m40.2s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', '-yf', 'dist-upgrade']
7m55.0s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
gcc-4.8-base libcap2 libffi6 libpcre3 libpython-stdlib libpython2.7-minimal
libpython2.7-stdlib python-django-filter
The following packages will be upgraded:
apt base-files bash bsdutils coreutils debconf debconf-i18n debianutils
diffutils django-filter dpkg e2fslibs e2fsprogs findutils gcc-4.7-base gnupg
gpgv grep gzip hostname initscripts libacl1 libapt-pkg4.12 libattr1
libblkid1 libc-bin libc6 libcomerr2 libdb5.1 libexpat1 libgcc1 libmount1
libncurses5 libncursesw5 libpam-modules libpam-modules-bin libpam-runtime
libpam0g libselinux1 libsemanage-common libsemanage1 libsepol1 libsqlite3-0
libss2 libssl1.0.0 libstdc++6 libtinfo5 libusb-0.1-4 libuuid1 lsb-base
mime-support mount multiarch-support ncurses-base ncurses-bin python
python-django python-minimal python2.7 python2.7-minimal sed sensible-utils
sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g
69 upgraded, 8 newly installed, 0 to remove and 0 not upgraded.
Need to get 41.0 MB of archives.
After this operation, 3747 kB of additional disk space will be used.
Get:1 http://http.debian.net/debian/ unstable/main base-files amd64 7.2 [78.6 kB]
Get:2 http://http.debian.net/debian/ unstable/main libattr1 amd64 1:2.4.47-1 [19.8 kB]
Get:3 http://http.debian.net/debian/ unstable/main libcap2 amd64 1:2.22-1.2 [13.6 kB]
Get:4 http://http.debian.net/debian/ unstable/main libc6 amd64 2.17-91 [2522 kB]
Get:5 http://http.debian.net/debian/ unstable/main libc-bin amd64 2.17-91 [747 kB]
Get:6 http://http.debian.net/debian/ unstable/main gcc-4.8-base amd64 4.8.1-8 [150 kB]
Get:7 http://http.debian.net/debian/ unstable/main libgcc1 amd64 1:4.8.1-8 [43.3 kB]
Get:8 http://http.debian.net/debian/ unstable/main sensible-utils all 0.0.9 [11.3 kB]
Get:9 http://http.debian.net/debian/ unstable/main debianutils amd64 4.4 [98.8 kB]
Get:10 http://http.debian.net/debian/ unstable/main bash amd64 4.2+dfsg-1 [1499 kB]
Get:11 http://http.debian.net/debian/ unstable/main coreutils amd64 8.21-1 [5585 kB]
Get:12 http://http.debian.net/debian/ unstable/main dpkg amd64 1.17.1 [2626 kB]
Get:13 http://http.debian.net/debian/ unstable/main diffutils amd64 1:3.2-8 [367 kB]
Get:14 http://http.debian.net/debian/ unstable/main e2fslibs amd64 1.42.8-1 [198 kB]
Get:15 http://http.debian.net/debian/ unstable/main e2fsprogs amd64 1.42.8-1 [993 kB]
Get:16 http://http.debian.net/debian/ unstable/main findutils amd64 4.4.2-6 [696 kB]
Get:17 http://http.debian.net/debian/ unstable/main grep amd64 2.14-2 [463 kB]
Get:18 http://http.debian.net/debian/ unstable/main gzip amd64 1.6-1 [121 kB]
Get:19 http://http.debian.net/debian/ unstable/main hostname amd64 3.13 [15.5 kB]
Get:20 http://http.debian.net/debian/ unstable/main mount amd64 2.20.1-5.5 [214 kB]
Get:21 http://http.debian.net/debian/ unstable/main libncursesw5 amd64 5.9+20130608-1 [141 kB]
Get:22 http://http.debian.net/debian/ unstable/main libtinfo5 amd64 5.9+20130608-1 [295 kB]
Get:23 http://http.debian.net/debian/ unstable/main libncurses5 amd64 5.9+20130608-1 [113 kB]
Get:24 http://http.debian.net/debian/ unstable/main ncurses-bin amd64 5.9+20130608-1 [359 kB]
Get:25 http://http.debian.net/debian/ unstable/main sed amd64 4.2.2-2 [242 kB]
Get:26 http://http.debian.net/debian/ unstable/main libpcre3 amd64 1:8.31-2 [247 kB]
Get:27 http://http.debian.net/debian/ unstable/main libselinux1 amd64 2.1.13-2 [95.6 kB]
Get:28 http://http.debian.net/debian/ unstable/main libsepol1 amd64 2.1.9-2 [140 kB]
Get:29 http://http.debian.net/debian/ unstable/main sysvinit amd64 2.88dsf-43 [134 kB]
Get:30 http://http.debian.net/debian/ unstable/main tar amd64 1.26+dfsg-6 [984 kB]
Get:31 http://http.debian.net/debian/ unstable/main debconf all 1.5.50 [172 kB]
Get:32 http://http.debian.net/debian/ unstable/main sysvinit-utils amd64 2.88dsf-43 [103 kB]
Get:33 http://http.debian.net/debian/ unstable/main sysv-rc all 2.88dsf-43 [80.5 kB]
Get:34 http://http.debian.net/debian/ unstable/main lsb-base all 4.1+Debian12 [26.8 kB]
Get:35 http://http.debian.net/debian/ unstable/main initscripts amd64 2.88dsf-43 [87.2 kB]
Get:36 http://http.debian.net/debian/ unstable/main tzdata all 2013d-1 [218 kB]
Get:37 http://http.debian.net/debian/ unstable/main util-linux amd64 2.20.1-5.5 [663 kB]
Get:38 http://http.debian.net/debian/ unstable/main libstdc++6 amd64 4.8.1-8 [325 kB]
Get:39 http://http.debian.net/debian/ unstable/main zlib1g amd64 1:1.2.8.dfsg-1 [90.7 kB]
Get:40 http://http.debian.net/debian/ unstable/main libapt-pkg4.12 amd64 0.9.9.4 [928 kB]
Get:41 http://http.debian.net/debian/ unstable/main libusb-0.1-4 amd64 2:0.1.12-23.2 [23.3 kB]
Get:42 http://http.debian.net/debian/ unstable/main gpgv amd64 1.4.14-1 [226 kB]
Get:43 http://http.debian.net/debian/ unstable/main gnupg amd64 1.4.14-1 [1987 kB]
Get:44 http://http.debian.net/debian/ unstable/main apt amd64 0.9.9.4 [1328 kB]
Get:45 http://http.debian.net/debian/ unstable/main bsdutils amd64 1:2.20.1-5.5 [85.5 kB]
Get:46 http://http.debian.net/debian/ unstable/main ncurses-base all 5.9+20130608-1 [217 kB]
Get:47 http://http.debian.net/debian/ unstable/main libacl1 amd64 2.2.52-1 [30.2 kB]
Get:48 http://http.debian.net/debian/ unstable/main libuuid1 amd64 2.20.1-5.5 [57.2 kB]
Get:49 http://http.debian.net/debian/ unstable/main libblkid1 amd64 2.20.1-5.5 [120 kB]
Get:50 http://http.debian.net/debian/ unstable/main libcomerr2 amd64 1.42.8-1 [57.1 kB]
Get:51 http://http.debian.net/debian/ unstable/main libmount1 amd64 2.20.1-5.5 [120 kB]
Get:52 http://http.debian.net/debian/ unstable/main libpam0g amd64 1.1.3-9 [129 kB]
Get:53 http://http.debian.net/debian/ unstable/main libpam-modules-bin amd64 1.1.3-9 [118 kB]
Get:54 http://http.debian.net/debian/ unstable/main libpam-modules amd64 1.1.3-9 [349 kB]
Get:55 http://http.debian.net/debian/ unstable/main libss2 amd64 1.42.8-1 [62.2 kB]
Get:56 http://http.debian.net/debian/ unstable/main libdb5.1 amd64 5.1.29-6 [717 kB]
Get:57 http://http.debian.net/debian/ unstable/main libsemanage-common all 2.1.10-2 [24.0 kB]
Get:58 http://http.debian.net/debian/ unstable/main libsemanage1 amd64 2.1.10-2 [102 kB]
Get:59 http://http.debian.net/debian/ unstable/main libssl1.0.0 amd64 1.0.1e-3 [1242 kB]
Get:60 http://http.debian.net/debian/ unstable/main libsqlite3-0 amd64 3.7.17-1 [478 kB]
Get:61 http://http.debian.net/debian/ unstable/main libexpat1 amd64 2.1.0-4 [138 kB]
Get:62 http://http.debian.net/debian/ unstable/main libffi6 amd64 3.0.13-4 [21.6 kB]
Get:63 http://http.debian.net/debian/ unstable/main python2.7 amd64 2.7.5-6 [229 kB]
Get:64 http://http.debian.net/debian/ unstable/main python2.7-minimal amd64 2.7.5-6 [1552 kB]
Get:65 http://http.debian.net/debian/ unstable/main libpython2.7-minimal amd64 2.7.5-6 [520 kB]
Get:66 http://http.debian.net/debian/ unstable/main mime-support all 3.54 [36.4 kB]
Get:67 http://http.debian.net/debian/ unstable/main libpython2.7-stdlib amd64 2.7.5-6 [2482 kB]
Get:68 http://http.debian.net/debian/ unstable/main libpam-runtime all 1.1.3-9 [222 kB]
Get:69 http://http.debian.net/debian/ unstable/main multiarch-support amd64 2.17-91 [161 kB]
Get:70 http://http.debian.net/debian/ unstable/main debconf-i18n all 1.5.50 [237 kB]
Get:71 http://http.debian.net/debian/ unstable/main gcc-4.7-base amd64 4.7.3-6 [149 kB]
Get:72 http://http.debian.net/debian/ unstable/main python amd64 2.7.5-2 [186 kB]
Get:73 http://http.debian.net/debian/ unstable/main python-minimal amd64 2.7.5-2 [42.7 kB]
Get:74 http://http.debian.net/debian/ unstable/main libpython-stdlib amd64 2.7.5-2 [19.6 kB]
Get:75 http://http.debian.net/debian/ unstable/main python-django all 1.5.1-2 [5655 kB]
Get:76 http://http.debian.net/debian/ unstable/main django-filter all 0.6-1 [2722 B]
Get:77 http://http.debian.net/debian/ unstable/main python-django-filter all 0.6-1 [12.8 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 41.0 MB in 26s (1548 kB/s)
(Reading database ... 24975 files and directories currently installed.)
Preparing to replace base-files 7.1wheezy1 (using .../base-files_7.2_amd64.deb) ...
Unpacking replacement base-files ...
Setting up base-files (7.2) ...
Installing new version of config file /etc/debian_version ...
Installing new version of config file /etc/issue ...
Installing new version of config file /etc/issue.net ...
Installing new version of config file /etc/os-release ...
(Reading database ... 24975 files and directories currently installed.)
Preparing to replace libattr1:amd64 1:2.4.46-8 (using .../libattr1_1%3a2.4.47-1_amd64.deb) ...
Unpacking replacement libattr1:amd64 ...
Setting up libattr1:amd64 (1:2.4.47-1) ...
Selecting previously unselected package libcap2:amd64.
(Reading database ... 24975 files and directories currently installed.)
Unpacking libcap2:amd64 (from .../libcap2_1%3a2.22-1.2_amd64.deb) ...
Setting up libcap2:amd64 (1:2.22-1.2) ...
(Reading database ... 24981 files and directories currently installed.)
Preparing to replace libc6:amd64 2.13-38 (using .../libc6_2.17-91_amd64.deb) ...
Checking for services that may need to be restarted...
Checking init scripts...
Configuring libc6
-----------------
xscreensaver and xlockmore must be restarted before upgrading
One or more running instances of xscreensaver or xlockmore have been
detected on this system. Because of incompatible library changes, the
upgrade of the GNU libc library will leave you unable to authenticate to
these programs. You should arrange for these programs to be restarted or
stopped before continuing this upgrade, to avoid locking your users out of
their current sessions.
Unpacking replacement libc6:amd64 ...
Setting up libc6:amd64 (2.17-91) ...
Checking for services that may need to be restarted...
Checking init scripts...
Nothing to restart.
(Reading database ... 24984 files and directories currently installed.)
Preparing to replace libc-bin 2.13-38 (using .../libc-bin_2.17-91_amd64.deb) ...
Unpacking replacement libc-bin ...
Setting up libc-bin (2.17-91) ...
Installing new version of config file /etc/gai.conf ...
Selecting previously unselected package gcc-4.8-base:amd64.
(Reading database ... 24979 files and directories currently installed.)
Unpacking gcc-4.8-base:amd64 (from .../gcc-4.8-base_4.8.1-8_amd64.deb) ...
Setting up gcc-4.8-base:amd64 (4.8.1-8) ...
(Reading database ... 24986 files and directories currently installed.)
Preparing to replace libgcc1:amd64 1:4.7.2-5 (using .../libgcc1_1%3a4.8.1-8_amd64.deb) ...
Unpacking replacement libgcc1:amd64 ...
Setting up libgcc1:amd64 (1:4.8.1-8) ...
Processing triggers for libc-bin ...
(Reading database ... 24986 files and directories currently installed.)
Preparing to replace sensible-utils 0.0.7 (using .../sensible-utils_0.0.9_all.deb) ...
Unpacking replacement sensible-utils ...
Processing triggers for mime-support ...
Setting up sensible-utils (0.0.9) ...
(Reading database ... 24988 files and directories currently installed.)
Preparing to replace debianutils 4.3.2 (using .../debianutils_4.4_amd64.deb) ...
Unpacking replacement debianutils ...
Setting up debianutils (4.4) ...
(Reading database ... 25009 files and directories currently installed.)
Preparing to replace bash 4.2+dfsg-0.1 (using .../bash_4.2+dfsg-1_amd64.deb) ...
Unpacking replacement bash ...
Setting up bash (4.2+dfsg-1) ...
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
(Reading database ... 25009 files and directories currently installed.)
Preparing to replace coreutils 8.13-3.5 (using .../coreutils_8.21-1_amd64.deb) ...
Unpacking replacement coreutils ...
Setting up coreutils (8.21-1) ...
(Reading database ... 25015 files and directories currently installed.)
Preparing to replace dpkg 1.16.10 (using .../archives/dpkg_1.17.1_amd64.deb) ...
Unpacking replacement dpkg ...
Setting up dpkg (1.17.1) ...
(Reading database ... 25007 files and directories currently installed.)
Preparing to replace diffutils 1:3.2-6 (using .../diffutils_1%3a3.2-8_amd64.deb) ...
Unpacking replacement diffutils ...
Setting up diffutils (1:3.2-8) ...
(Reading database ... 25007 files and directories currently installed.)
Preparing to replace e2fslibs:amd64 1.42.5-1.1 (using .../e2fslibs_1.42.8-1_amd64.deb) ...
Unpacking replacement e2fslibs:amd64 ...
Setting up e2fslibs:amd64 (1.42.8-1) ...
Processing triggers for libc-bin ...
(Reading database ... 25007 files and directories currently installed.)
Preparing to replace e2fsprogs 1.42.5-1.1 (using .../e2fsprogs_1.42.8-1_amd64.deb) ...
Unpacking replacement e2fsprogs ...
Setting up e2fsprogs (1.42.8-1) ...
(Reading database ... 25007 files and directories currently installed.)
Preparing to replace findutils 4.4.2-4 (using .../findutils_4.4.2-6_amd64.deb) ...
Unpacking replacement findutils ...
Setting up findutils (4.4.2-6) ...
(Reading database ... 25007 files and directories currently installed.)
Preparing to replace grep 2.12-2 (using .../archives/grep_2.14-2_amd64.deb) ...
Unpacking replacement grep ...
Setting up grep (2.14-2) ...
(Reading database ... 25008 files and directories currently installed.)
Preparing to replace gzip 1.5-1.1 (using .../archives/gzip_1.6-1_amd64.deb) ...
Unpacking replacement gzip ...
Setting up gzip (1.6-1) ...
(Reading database ... 25008 files and directories currently installed.)
Preparing to replace hostname 3.11 (using .../hostname_3.13_amd64.deb) ...
Unpacking replacement hostname ...
Setting up hostname (3.13) ...
(Reading database ... 25008 files and directories currently installed.)
Preparing to replace mount 2.20.1-5.3 (using .../mount_2.20.1-5.5_amd64.deb) ...
Unpacking replacement mount ...
Setting up mount (2.20.1-5.5) ...
(Reading database ... 25008 files and directories currently installed.)
Preparing to replace libncursesw5:amd64 5.9-10 (using .../libncursesw5_5.9+20130608-1_amd64.deb) ...
Unpacking replacement libncursesw5:amd64 ...
Preparing to replace libtinfo5:amd64 5.9-10 (using .../libtinfo5_5.9+20130608-1_amd64.deb) ...
Unpacking replacement libtinfo5:amd64 ...
Setting up libtinfo5:amd64 (5.9+20130608-1) ...
Processing triggers for libc-bin ...
(Reading database ... 25008 files and directories currently installed.)
Preparing to replace libncurses5:amd64 5.9-10 (using .../libncurses5_5.9+20130608-1_amd64.deb) ...
Unpacking replacement libncurses5:amd64 ...
Setting up libncurses5:amd64 (5.9+20130608-1) ...
Processing triggers for libc-bin ...
(Reading database ... 25008 files and directories currently installed.)
Preparing to replace ncurses-bin 5.9-10 (using .../ncurses-bin_5.9+20130608-1_amd64.deb) ...
Unpacking replacement ncurses-bin ...
Setting up ncurses-bin (5.9+20130608-1) ...
(Reading database ... 25006 files and directories currently installed.)
Preparing to replace sed 4.2.1-10 (using .../archives/sed_4.2.2-2_amd64.deb) ...
Unpacking replacement sed ...
Setting up sed (4.2.2-2) ...
Selecting previously unselected package libpcre3:amd64.
(Reading database ... 25008 files and directories currently installed.)
Unpacking libpcre3:amd64 (from .../libpcre3_1%3a8.31-2_amd64.deb) ...
Setting up libpcre3:amd64 (1:8.31-2) ...
Processing triggers for libc-bin ...
(Reading database ... 25021 files and directories currently installed.)
Preparing to replace libselinux1:amd64 2.1.9-5 (using .../libselinux1_2.1.13-2_amd64.deb) ...
Unpacking replacement libselinux1:amd64 ...
Setting up libselinux1:amd64 (2.1.13-2) ...
Processing triggers for libc-bin ...
(Reading database ... 25019 files and directories currently installed.)
Preparing to replace libsepol1:amd64 2.1.4-3 (using .../libsepol1_2.1.9-2_amd64.deb) ...
Unpacking replacement libsepol1:amd64 ...
Setting up libsepol1:amd64 (2.1.9-2) ...
Processing triggers for libc-bin ...
(Reading database ... 25019 files and directories currently installed.)
Preparing to replace sysvinit 2.88dsf-41 (using .../sysvinit_2.88dsf-43_amd64.deb) ...
Unpacking replacement sysvinit ...
Setting up sysvinit (2.88dsf-43) ...
Not restarting sysvinit
(Reading database ... 25019 files and directories currently installed.)
Preparing to replace tar 1.26+dfsg-0.1 (using .../tar_1.26+dfsg-6_amd64.deb) ...
Unpacking replacement tar ...
Processing triggers for mime-support ...
Setting up tar (1.26+dfsg-6) ...
(Reading database ... 25021 files and directories currently installed.)
Preparing to replace debconf 1.5.49 (using .../debconf_1.5.50_all.deb) ...
Unpacking replacement debconf ...
Setting up debconf (1.5.50) ...
(Reading database ... 25021 files and directories currently installed.)
Preparing to replace sysvinit-utils 2.88dsf-41 (using .../sysvinit-utils_2.88dsf-43_amd64.deb) ...
Unpacking replacement sysvinit-utils ...
Setting up sysvinit-utils (2.88dsf-43) ...
(Reading database ... 25021 files and directories currently installed.)
Preparing to replace sysv-rc 2.88dsf-41 (using .../sysv-rc_2.88dsf-43_all.deb) ...
Unpacking replacement sysv-rc ...
Setting up sysv-rc (2.88dsf-43) ...
(Reading database ... 25021 files and directories currently installed.)
Preparing to replace lsb-base 4.1+Debian8+deb7u1 (using .../lsb-base_4.1+Debian12_all.deb) ...
Unpacking replacement lsb-base ...
Setting up lsb-base (4.1+Debian12) ...
(Reading database ... 25021 files and directories currently installed.)
Preparing to replace initscripts 2.88dsf-41 (using .../initscripts_2.88dsf-43_amd64.deb) ...
Removing unmodified and obsolete conffile /etc/init.d/mtab.sh ...
Unpacking replacement initscripts ...
Setting up initscripts (2.88dsf-43) ...
Installing new version of config file /etc/init.d/bootmisc.sh ...
Installing new version of config file /etc/init.d/checkfs.sh ...
Installing new version of config file /etc/init.d/checkroot.sh ...
Installing new version of config file /etc/init.d/checkroot-bootclean.sh ...
Installing new version of config file /etc/init.d/mountdevsubfs.sh ...
Installing new version of config file /etc/init.d/mountkernfs.sh ...
Installing new version of config file /etc/init.d/rmnologin ...
Installing new version of config file /etc/network/if-up.d/mountnfs ...
(Reading database ... 25020 files and directories currently installed.)
Preparing to replace tzdata 2013c-0wheezy1 (using .../tzdata_2013d-1_all.deb) ...
Unpacking replacement tzdata ...
Setting up tzdata (2013d-1) ...
Current default time zone: 'Etc/UTC'
Local time is now: Fri Aug 2 04:38:18 UTC 2013.
Universal Time is now: Fri Aug 2 04:38:18 UTC 2013.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
(Reading database ... 25020 files and directories currently installed.)
Preparing to replace util-linux 2.20.1-5.3 (using .../util-linux_2.20.1-5.5_amd64.deb) ...
Unpacking replacement util-linux ...
Processing triggers for mime-support ...
Setting up util-linux (2.20.1-5.5) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
(Reading database ... 25020 files and directories currently installed.)
Preparing to replace libstdc++6:amd64 4.7.2-5 (using .../libstdc++6_4.8.1-8_amd64.deb) ...
Unpacking replacement libstdc++6:amd64 ...
Setting up libstdc++6:amd64 (4.8.1-8) ...
Processing triggers for libc-bin ...
(Reading database ... 25020 files and directories currently installed.)
Preparing to replace zlib1g:amd64 1:1.2.7.dfsg-13 (using .../zlib1g_1%3a1.2.8.dfsg-1_amd64.deb) ...
Unpacking replacement zlib1g:amd64 ...
Setting up zlib1g:amd64 (1:1.2.8.dfsg-1) ...
Processing triggers for libc-bin ...
(Reading database ... 25020 files and directories currently installed.)
Preparing to replace libapt-pkg4.12:amd64 0.9.7.9 (using .../libapt-pkg4.12_0.9.9.4_amd64.deb) ...
Unpacking replacement libapt-pkg4.12:amd64 ...
Setting up libapt-pkg4.12:amd64 (0.9.9.4) ...
Processing triggers for libc-bin ...
(Reading database ... 25020 files and directories currently installed.)
Preparing to replace libusb-0.1-4:amd64 2:0.1.12-20+nmu1 (using .../libusb-0.1-4_2%3a0.1.12-23.2_amd64.deb) ...
Unpacking replacement libusb-0.1-4:amd64 ...
Setting up libusb-0.1-4:amd64 (2:0.1.12-23.2) ...
Processing triggers for libc-bin ...
(Reading database ... 25020 files and directories currently installed.)
Preparing to replace gpgv 1.4.12-7 (using .../gpgv_1.4.14-1_amd64.deb) ...
Unpacking replacement gpgv ...
Setting up gpgv (1.4.14-1) ...
(Reading database ... 25020 files and directories currently installed.)
Preparing to replace gnupg 1.4.12-7 (using .../gnupg_1.4.14-1_amd64.deb) ...
Unpacking replacement gnupg ...
Setting up gnupg (1.4.14-1) ...
(Reading database ... 25020 files and directories currently installed.)
Preparing to replace apt 0.9.7.9 (using .../archives/apt_0.9.9.4_amd64.deb) ...
Unpacking replacement apt ...
Setting up apt (0.9.9.4) ...
Installing new version of config file /etc/apt/apt.conf.d/01autoremove ...
Installing new version of config file /etc/cron.daily/apt ...
gpg: key B98321F9: "Squeeze Stable Release Key <debian-release at lists.debian.org>" not changed
gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster at debian.org>" not changed
gpg: key 65FFB764: "Wheezy Stable Release Key <debian-release at lists.debian.org>" not changed
gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) <ftpmaster at debian.org>" not changed
gpg: Total number processed: 4
gpg: unchanged: 4
dpkg-query: no packages found matching linux-image-[0-9]*
(Reading database ... 25040 files and directories currently installed.)
Preparing to replace bsdutils 1:2.20.1-5.3 (using .../bsdutils_1%3a2.20.1-5.5_amd64.deb) ...
Unpacking replacement bsdutils ...
Setting up bsdutils (1:2.20.1-5.5) ...
(Reading database ... 25040 files and directories currently installed.)
Preparing to replace ncurses-base 5.9-10 (using .../ncurses-base_5.9+20130608-1_all.deb) ...
Unpacking replacement ncurses-base ...
Setting up ncurses-base (5.9+20130608-1) ...
(Reading database ... 25040 files and directories currently installed.)
Preparing to replace libacl1:amd64 2.2.51-8 (using .../libacl1_2.2.52-1_amd64.deb) ...
Unpacking replacement libacl1:amd64 ...
Setting up libacl1:amd64 (2.2.52-1) ...
Processing triggers for libc-bin ...
(Reading database ... 25040 files and directories currently installed.)
Preparing to replace libuuid1:amd64 2.20.1-5.3 (using .../libuuid1_2.20.1-5.5_amd64.deb) ...
Unpacking replacement libuuid1:amd64 ...
Setting up libuuid1:amd64 (2.20.1-5.5) ...
Processing triggers for libc-bin ...
(Reading database ... 25040 files and directories currently installed.)
Preparing to replace libblkid1:amd64 2.20.1-5.3 (using .../libblkid1_2.20.1-5.5_amd64.deb) ...
Unpacking replacement libblkid1:amd64 ...
Setting up libblkid1:amd64 (2.20.1-5.5) ...
Processing triggers for libc-bin ...
(Reading database ... 25040 files and directories currently installed.)
Preparing to replace libcomerr2:amd64 1.42.5-1.1 (using .../libcomerr2_1.42.8-1_amd64.deb) ...
Unpacking replacement libcomerr2:amd64 ...
Setting up libcomerr2:amd64 (1.42.8-1) ...
Processing triggers for libc-bin ...
(Reading database ... 25040 files and directories currently installed.)
Preparing to replace libmount1 2.20.1-5.3 (using .../libmount1_2.20.1-5.5_amd64.deb) ...
Unpacking replacement libmount1 ...
Setting up libmount1 (2.20.1-5.5) ...
Processing triggers for libc-bin ...
(Reading database ... 25040 files and directories currently installed.)
Preparing to replace libpam0g:amd64 1.1.3-7.1 (using .../libpam0g_1.1.3-9_amd64.deb) ...
Unpacking replacement libpam0g:amd64 ...
Setting up libpam0g:amd64 (1.1.3-9) ...
Processing triggers for libc-bin ...
(Reading database ... 25040 files and directories currently installed.)
Preparing to replace libpam-modules-bin 1.1.3-7.1 (using .../libpam-modules-bin_1.1.3-9_amd64.deb) ...
Unpacking replacement libpam-modules-bin ...
Replacing files in old package libpam-modules:amd64 ...
Setting up libpam-modules-bin (1.1.3-9) ...
(Reading database ... 25041 files and directories currently installed.)
Preparing to replace libpam-modules:amd64 1.1.3-7.1 (using .../libpam-modules_1.1.3-9_amd64.deb) ...
Unpacking replacement libpam-modules:amd64 ...
Setting up libpam-modules:amd64 (1.1.3-9) ...
(Reading database ... 25041 files and directories currently installed.)
Preparing to replace libss2:amd64 1.42.5-1.1 (using .../libss2_1.42.8-1_amd64.deb) ...
Unpacking replacement libss2:amd64 ...
Setting up libss2:amd64 (1.42.8-1) ...
Processing triggers for libc-bin ...
(Reading database ... 25041 files and directories currently installed.)
Preparing to replace libdb5.1:amd64 5.1.29-5 (using .../libdb5.1_5.1.29-6_amd64.deb) ...
Unpacking replacement libdb5.1:amd64 ...
Setting up libdb5.1:amd64 (5.1.29-6) ...
Processing triggers for libc-bin ...
(Reading database ... 25041 files and directories currently installed.)
Preparing to replace libsemanage-common 2.1.6-6 (using .../libsemanage-common_2.1.10-2_all.deb) ...
Unpacking replacement libsemanage-common ...
Setting up libsemanage-common (2.1.10-2) ...
(Reading database ... 25041 files and directories currently installed.)
Preparing to replace libsemanage1:amd64 2.1.6-6 (using .../libsemanage1_2.1.10-2_amd64.deb) ...
Unpacking replacement libsemanage1:amd64 ...
Setting up libsemanage1:amd64 (2.1.10-2) ...
Processing triggers for libc-bin ...
(Reading database ... 25041 files and directories currently installed.)
Preparing to replace libssl1.0.0:amd64 1.0.1e-2 (using .../libssl1.0.0_1.0.1e-3_amd64.deb) ...
Unpacking replacement libssl1.0.0:amd64 ...
Preparing to replace libsqlite3-0:amd64 3.7.13-1+deb7u1 (using .../libsqlite3-0_3.7.17-1_amd64.deb) ...
Unpacking replacement libsqlite3-0:amd64 ...
Preparing to replace libexpat1:amd64 2.1.0-1 (using .../libexpat1_2.1.0-4_amd64.deb) ...
Unpacking replacement libexpat1:amd64 ...
Selecting previously unselected package libffi6:amd64.
Unpacking libffi6:amd64 (from .../libffi6_3.0.13-4_amd64.deb) ...
Preparing to replace python2.7 2.7.3-6 (using .../python2.7_2.7.5-6_amd64.deb) ...
Unpacking replacement python2.7 ...
Preparing to replace python2.7-minimal 2.7.3-6 (using .../python2.7-minimal_2.7.5-6_amd64.deb) ...
Unpacking replacement python2.7-minimal ...
dpkg: warning: unable to delete old directory '/etc/python2.7': Directory not empty
Selecting previously unselected package libpython2.7-minimal.
Unpacking libpython2.7-minimal (from .../libpython2.7-minimal_2.7.5-6_amd64.deb) ...
Preparing to replace mime-support 3.52-1 (using .../mime-support_3.54_all.deb) ...
Unpacking replacement mime-support ...
Selecting previously unselected package libpython2.7-stdlib.
Unpacking libpython2.7-stdlib (from .../libpython2.7-stdlib_2.7.5-6_amd64.deb) ...
Preparing to replace libpam-runtime 1.1.3-7.1 (using .../libpam-runtime_1.1.3-9_all.deb) ...
Unpacking replacement libpam-runtime ...
Setting up libpam-runtime (1.1.3-9) ...
(Reading database ... 25044 files and directories currently installed.)
Preparing to replace multiarch-support 2.13-38 (using .../multiarch-support_2.17-91_amd64.deb) ...
Unpacking replacement multiarch-support ...
Setting up multiarch-support (2.17-91) ...
(Reading database ... 25044 files and directories currently installed.)
Preparing to replace debconf-i18n 1.5.49 (using .../debconf-i18n_1.5.50_all.deb) ...
Unpacking replacement debconf-i18n ...
Preparing to replace gcc-4.7-base:amd64 4.7.2-5 (using .../gcc-4.7-base_4.7.3-6_amd64.deb) ...
Unpacking replacement gcc-4.7-base:amd64 ...
Preparing to replace python 2.7.3-4 (using .../python_2.7.5-2_amd64.deb) ...
Unpacking replacement python ...
Preparing to replace python-minimal 2.7.3-4 (using .../python-minimal_2.7.5-2_amd64.deb) ...
Unpacking replacement python-minimal ...
Selecting previously unselected package libpython-stdlib:amd64.
Unpacking libpython-stdlib:amd64 (from .../libpython-stdlib_2.7.5-2_amd64.deb) ...
Preparing to replace python-django 1.4.5-1 (using .../python-django_1.5.1-2_all.deb) ...
Unpacking replacement python-django ...
Preparing to replace django-filter 0.5.3-3 (using .../django-filter_0.6-1_all.deb) ...
Unpacking replacement django-filter ...
Selecting previously unselected package python-django-filter.
Unpacking python-django-filter (from .../python-django-filter_0.6-1_all.deb) ...
Processing triggers for python-support ...
Setting up libncursesw5:amd64 (5.9+20130608-1) ...
Setting up libssl1.0.0:amd64 (1.0.1e-3) ...
Setting up libsqlite3-0:amd64 (3.7.17-1) ...
Setting up libexpat1:amd64 (2.1.0-4) ...
Setting up libffi6:amd64 (3.0.13-4) ...
Setting up libpython2.7-minimal (2.7.5-6) ...
Setting up python2.7-minimal (2.7.5-6) ...
Setting up mime-support (3.54) ...
Installing new version of config file /etc/mime.types ...
Setting up libpython2.7-stdlib (2.7.5-6) ...
Setting up python2.7 (2.7.5-6) ...
Setting up debconf-i18n (1.5.50) ...
Setting up gcc-4.7-base:amd64 (4.7.3-6) ...
Setting up python-minimal (2.7.5-2) ...
Setting up libpython-stdlib:amd64 (2.7.5-2) ...
Setting up python (2.7.5-2) ...
Setting up python-django (1.5.1-2) ...
Setting up python-django-filter (0.6-1) ...
Setting up django-filter (0.6-1) ...
Processing triggers for libc-bin ...
7m55.0s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', '-yf', 'dist-upgrade']
7m55.0s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filters']
7m56.7s DUMP:
E: No packages found
7m56.7s DEBUG: Command failed (status=100), but ignoring error: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filters']
7m56.7s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filters-doc']
7m56.8s DUMP:
E: No packages found
7m56.8s DEBUG: Command failed (status=100), but ignoring error: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filters-doc']
7m56.8s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'django-filter']
7m56.8s DUMP:
Package: django-filter
Version: 0.6-1
Installed-Size: 27
Maintainer: Brian May <bam at debian.org>
Architecture: all
Depends: python-django-filter
Description-en: filter Django QuerySets based on user selections (transitional package)
This is a dummy package to aid switching to python-django-filter.
Description-md5: 008ac3aa98d5fbd43daa22e8b4b57672
Homepage: http://github.com/alex/django-filter
Section: python
Priority: optional
Filename: pool/main/d/django-filter/django-filter_0.6-1_all.deb
Size: 2722
MD5sum: e9756bbf875f57869384d405f8ad99a3
SHA1: cc2f723dba9b83cbb4404deb6a00c4272995e88b
SHA256: e152953bfb1ab743fed8f5e73a1ac512fcbf6816c108e40d02d8ebd532b22417
7m56.8s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'django-filter']
7m56.8s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filter']
7m56.8s DUMP:
Package: python-django-filter
Source: django-filter
Version: 0.6-1
Installed-Size: 91
Maintainer: Brian May <bam at debian.org>
Architecture: all
Replaces: django-filter (<< 0.6)
Depends: python (>= 2.7), python (<< 2.8), python-django (>= 1.4.5)
Suggests: python-django-filter-doc
Breaks: django-filter (<< 0.6)
Description-en: filter Django QuerySets based on user selections
Django-filter is a generic, reusable application to alleviate some of the more
mundane bits of view code. Specifically allowing the users to filter down a
queryset based on a model??s fields and displaying the form to let them do this.
Description-md5: dfbb8a57e8b099f3ace19c94901d0269
Homepage: http://github.com/alex/django-filter
Section: python
Priority: optional
Filename: pool/main/d/django-filter/python-django-filter_0.6-1_all.deb
Size: 12752
MD5sum: 9ae10d9fee137665d13d99a88a3767b3
SHA1: b5d621243ed377af575068ef0787efd1262695d6
SHA256: 6f7f73ea41f1e29f2eb18e84dee084caafb4557c8fdf26fe5270b178430d1a32
7m56.8s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'show', 'python-django-filter']
7m56.8s INFO: apt-cache knows about the following packages: django-filter, python-django-filter
7m56.8s INFO: the following packages are not in the archive: python-django-filters, python-django-filters-doc
7m56.8s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'policy']
7m56.9s DUMP:
Package files:
100 /var/lib/dpkg/status
release a=now
500 http://http.debian.net/debian/ unstable/non-free Translation-en
500 http://http.debian.net/debian/ unstable/main Translation-en
500 http://http.debian.net/debian/ unstable/contrib Translation-en
500 http://http.debian.net/debian/ unstable/non-free amd64 Packages
release o=Debian,a=unstable,n=sid,l=Debian,c=non-free
origin http.debian.net
500 http://http.debian.net/debian/ unstable/contrib amd64 Packages
release o=Debian,a=unstable,n=sid,l=Debian,c=contrib
origin http.debian.net
500 http://http.debian.net/debian/ unstable/main amd64 Packages
release o=Debian,a=unstable,n=sid,l=Debian,c=main
origin http.debian.net
Pinned packages:
7m56.9s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'policy']
7m56.9s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'policy', 'django-filter', 'python-django-filter']
7m57.0s DUMP:
django-filter:
Installed: 0.6-1
Candidate: 0.6-1
Version table:
*** 0.6-1 0
500 http://http.debian.net/debian/ unstable/main amd64 Packages
100 /var/lib/dpkg/status
python-django-filter:
Installed: 0.6-1
Candidate: 0.6-1
Version table:
*** 0.6-1 0
500 http://http.debian.net/debian/ unstable/main amd64 Packages
100 /var/lib/dpkg/status
7m57.0s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-cache', 'policy', 'django-filter', 'python-django-filter']
7m57.0s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', '-y', 'install', 'django-filter', 'python-django-filter']
7m57.2s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
django-filter is already the newest version.
python-django-filter is already the newest version.
python-django-filter set to manually installed.
The following package was automatically installed and is no longer required:
python-support
Use 'apt-get autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
7m57.2s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', '-y', 'install', 'django-filter', 'python-django-filter']
7m57.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
8m0.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
8m0.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
8m1.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
8m1.3s DEBUG: Copying ../python-django-filters_0.6-2_all.deb, ../python-django-filters-doc_0.6-2_all.deb, ../django-filter_0.6-2_all.deb, ../python-django-filter_0.6-2_all.deb to /tmp/tmpTNTx4a/tmp
8m1.3s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '-i', 'tmp/python-django-filters_0.6-2_all.deb', 'tmp/python-django-filters-doc_0.6-2_all.deb', 'tmp/django-filter_0.6-2_all.deb', 'tmp/python-django-filter_0.6-2_all.deb']
8m1.4s DUMP:
Selecting previously unselected package python-django-filters.
dpkg: regarding .../python-django-filters_0.6-2_all.deb containing python-django-filters:
python-django-filters breaks python-django-filter (<< 0.6-2)
python-django-filter (version 0.6-1) is present and installed.
dpkg: error processing tmp/python-django-filters_0.6-2_all.deb (--install):
installing python-django-filters would break python-django-filter, and
deconfiguration is not permitted (--auto-deconfigure might help)
Selecting previously unselected package python-django-filters-doc.
(Reading database ... 25685 files and directories currently installed.)
Unpacking python-django-filters-doc (from .../python-django-filters-doc_0.6-2_all.deb) ...
Preparing to replace django-filter 0.6-1 (using .../django-filter_0.6-2_all.deb) ...
Unpacking replacement django-filter ...
Preparing to replace python-django-filter 0.6-1 (using .../python-django-filter_0.6-2_all.deb) ...
Unpacking replacement python-django-filter ...
dpkg: dependency problems prevent configuration of python-django-filters-doc:
python-django-filters-doc depends on libjs-sphinxdoc (>= 1.0); however:
Package libjs-sphinxdoc is not installed.
dpkg: error processing python-django-filters-doc (--install):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of django-filter:
django-filter depends on python-django-filters; however:
Package python-django-filters is not installed.
dpkg: error processing django-filter (--install):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python-django-filter:
python-django-filter depends on python-django-filters; however:
Package python-django-filters is not installed.
dpkg: error processing python-django-filter (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
tmp/python-django-filters_0.6-2_all.deb
python-django-filters-doc
django-filter
python-django-filter
8m1.4s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '-i', 'tmp/python-django-filters_0.6-2_all.deb', 'tmp/python-django-filters-doc_0.6-2_all.deb', 'tmp/django-filter_0.6-2_all.deb', 'tmp/python-django-filter_0.6-2_all.deb']
8m1.4s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', '-yf', 'install']
8m3.4s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
libexpat1 libffi6 libncursesw5 libpython-stdlib libpython2.7-minimal
libpython2.7-stdlib libsqlite3-0 libssl1.0.0 mime-support python
python-django python-minimal python-support python2.7 python2.7-minimal
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
libjs-jquery libjs-sphinxdoc libjs-underscore
Recommended packages:
javascript-common
The following packages will be REMOVED:
django-filter python-django-filter
The following NEW packages will be installed:
libjs-jquery libjs-sphinxdoc libjs-underscore
0 upgraded, 3 newly installed, 2 to remove and 0 not upgraded.
3 not fully installed or removed.
Need to get 174 kB of archives.
After this operation, 532 kB of additional disk space will be used.
Get:1 http://http.debian.net/debian/ unstable/main libjs-jquery all 1.7.2+dfsg-2 [80.2 kB]
Get:2 http://http.debian.net/debian/ unstable/main libjs-underscore all 1.4.4-2 [49.1 kB]
Get:3 http://http.debian.net/debian/ unstable/main libjs-sphinxdoc all 1.1.3+dfsg-8 [44.5 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 174 kB in 1s (126 kB/s)
(Reading database ... 25702 files and directories currently installed.)
Removing django-filter ...
Removing python-django-filter ...
Selecting previously unselected package libjs-jquery.
(Reading database ... 25696 files and directories currently installed.)
Unpacking libjs-jquery (from .../libjs-jquery_1.7.2+dfsg-2_all.deb) ...
Selecting previously unselected package libjs-underscore.
Unpacking libjs-underscore (from .../libjs-underscore_1.4.4-2_all.deb) ...
Selecting previously unselected package libjs-sphinxdoc.
Unpacking libjs-sphinxdoc (from .../libjs-sphinxdoc_1.1.3+dfsg-8_all.deb) ...
Setting up libjs-jquery (1.7.2+dfsg-2) ...
Setting up libjs-underscore (1.4.4-2) ...
Setting up libjs-sphinxdoc (1.1.3+dfsg-8) ...
Setting up python-django-filters-doc (0.6-2) ...
8m3.4s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', '-yf', 'install']
8m3.4s INFO: Installation of ['tmp/python-django-filters_0.6-2_all.deb', 'tmp/python-django-filters-doc_0.6-2_all.deb', 'tmp/django-filter_0.6-2_all.deb', 'tmp/python-django-filter_0.6-2_all.deb'] ok
8m3.4s DEBUG: Removing /tmp/tmpTNTx4a/tmp/python-django-filters_0.6-2_all.deb
8m3.4s DEBUG: Removing /tmp/tmpTNTx4a/tmp/python-django-filters-doc_0.6-2_all.deb
8m3.4s DEBUG: Removing /tmp/tmpTNTx4a/tmp/django-filter_0.6-2_all.deb
8m3.4s DEBUG: Removing /tmp/tmpTNTx4a/tmp/python-django-filter_0.6-2_all.deb
8m3.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
8m4.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
8m4.7s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '--get-selections', '*']
8m4.7s DUMP:
apt install
base-files install
base-passwd install
bash install
bsdutils install
coreutils install
dash install
debconf install
debconf-i18n install
debian-archive-keyring install
debianutils install
diffutils install
dpkg install
e2fslibs:amd64 install
e2fsprogs install
eatmydata install
findutils install
gcc-4.7-base:amd64 install
gcc-4.8-base:amd64 install
gnupg install
gpgv install
grep install
gzip install
hostname install
initscripts install
insserv install
libacl1:amd64 install
libapt-pkg4.12:amd64 install
libattr1:amd64 install
libblkid1:amd64 install
libbz2-1.0:amd64 install
libc-bin install
libc6:amd64 install
libcap2:amd64 install
libcomerr2:amd64 install
libdb5.1:amd64 install
libexpat1:amd64 install
libffi6:amd64 install
libgcc1:amd64 install
libjs-jquery install
libjs-sphinxdoc install
libjs-underscore install
liblocale-gettext-perl install
liblzma5:amd64 install
libmount1 install
libncurses5:amd64 install
libncursesw5:amd64 install
libpam-modules:amd64 install
libpam-modules-bin install
libpam-runtime install
libpam0g:amd64 install
libpcre3:amd64 install
libpython-stdlib:amd64 install
libpython2.7-minimal install
libpython2.7-stdlib install
libreadline6:amd64 install
libselinux1:amd64 install
libsemanage-common install
libsemanage1:amd64 install
libsepol1:amd64 install
libslang2:amd64 install
libsqlite3-0:amd64 install
libss2:amd64 install
libssl1.0.0:amd64 install
libstdc++6:amd64 install
libtext-charwidth-perl install
libtext-iconv-perl install
libtext-wrapi18n-perl install
libtinfo5:amd64 install
libusb-0.1-4:amd64 install
libustr-1.0-1:amd64 install
libuuid1:amd64 install
login install
lsb-base install
mawk install
mime-support install
mount install
multiarch-support install
ncurses-base install
ncurses-bin install
passwd install
perl-base install
python install
python-django install
python-django-filters install
python-django-filters-doc install
python-minimal install
python-support install
python2.7 install
python2.7-minimal install
readline-common install
sed install
sensible-utils install
sysv-rc install
sysvinit install
sysvinit-utils install
tar install
tzdata install
util-linux install
xz-utils install
zlib1g:amd64 install
8m4.7s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '--get-selections', '*']
8m4.7s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', 'remove', 'libpython2.7-minimal', 'libjs-underscore', 'libffi6:amd64', 'python-django', 'python', 'libexpat1:amd64', 'python2.7', 'libssl1.0.0:amd64', 'libpython-stdlib:amd64', 'python2.7-minimal', 'libncursesw5:amd64', 'python-support', 'libjs-jquery', 'libjs-sphinxdoc', 'mime-support', 'libpython2.7-stdlib', 'python-minimal', 'libsqlite3-0:amd64', 'python-django-filters-doc', 'python-django-filters']
8m7.9s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
Package 'python-django-filters' is not installed, so not removed
The following packages will be REMOVED:
libexpat1 libffi6 libjs-jquery libjs-sphinxdoc libjs-underscore libncursesw5
libpython-stdlib libpython2.7-minimal libpython2.7-stdlib libsqlite3-0
libssl1.0.0 mime-support python python-django python-django-filters-doc
python-minimal python-support python2.7 python2.7-minimal
0 upgraded, 0 newly installed, 19 to remove and 0 not upgraded.
After this operation, 75.8 MB disk space will be freed.
(Reading database ... 25729 files and directories currently installed.)
Removing python-support ...
Removing python-django ...
Removing python ...
Removing python2.7 ...
Removing libpython-stdlib:amd64 ...
Removing libpython2.7-stdlib ...
dpkg-query: no packages found matching pkgname
Removing libexpat1:amd64 ...
Removing libffi6:amd64 ...
Removing python-django-filters-doc ...
Removing libjs-sphinxdoc ...
Removing libjs-jquery ...
Removing libjs-underscore ...
Removing libncursesw5:amd64 ...
Removing python-minimal ...
Removing python2.7-minimal ...
Removing libpython2.7-minimal ...
dpkg-query: no packages found matching pkgname
Removing libsqlite3-0:amd64 ...
Removing libssl1.0.0:amd64 ...
Removing mime-support ...
Processing triggers for libc-bin ...
8m7.9s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', 'remove', 'libpython2.7-minimal', 'libjs-underscore', 'libffi6:amd64', 'python-django', 'python', 'libexpat1:amd64', 'python2.7', 'libssl1.0.0:amd64', 'libpython-stdlib:amd64', 'python2.7-minimal', 'libncursesw5:amd64', 'python-support', 'libjs-jquery', 'libjs-sphinxdoc', 'mime-support', 'libpython2.7-stdlib', 'python-minimal', 'libsqlite3-0:amd64', 'python-django-filters-doc', 'python-django-filters']
8m7.9s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '--purge', 'libpython2.7-minimal', 'libjs-underscore', 'libffi6:amd64', 'python-django', 'python', 'libexpat1:amd64', 'python2.7', 'libssl1.0.0:amd64', 'libpython-stdlib:amd64', 'python2.7-minimal', 'libncursesw5:amd64', 'python-support', 'libjs-jquery', 'libjs-sphinxdoc', 'mime-support', 'libpython2.7-stdlib', 'python-minimal', 'libsqlite3-0:amd64']
8m8.1s DUMP:
(Reading database ... 6696 files and directories currently installed.)
Removing libpython2.7-minimal ...
Purging configuration files for libpython2.7-minimal ...
dpkg: warning: ignoring request to remove libjs-underscore which isn't installed
Removing libffi6:amd64 ...
Purging configuration files for libffi6:amd64 ...
Removing python-django ...
Purging configuration files for python-django ...
Removing python ...
Purging configuration files for python ...
Removing libexpat1:amd64 ...
Purging configuration files for libexpat1:amd64 ...
Removing python2.7 ...
Purging configuration files for python2.7 ...
Removing libssl1.0.0:amd64 ...
Purging configuration files for libssl1.0.0:amd64 ...
dpkg: warning: ignoring request to remove libpython-stdlib which isn't installed
Removing python2.7-minimal ...
Purging configuration files for python2.7-minimal ...
Removing libncursesw5:amd64 ...
Purging configuration files for libncursesw5:amd64 ...
Removing python-support ...
Purging configuration files for python-support ...
dpkg: warning: ignoring request to remove libjs-jquery which isn't installed
dpkg: warning: ignoring request to remove libjs-sphinxdoc which isn't installed
Removing mime-support ...
Purging configuration files for mime-support ...
dpkg: warning: ignoring request to remove libpython2.7-stdlib which isn't installed
dpkg: warning: ignoring request to remove python-minimal which isn't installed
Removing libsqlite3-0:amd64 ...
Purging configuration files for libsqlite3-0:amd64 ...
8m8.1s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '--purge', 'libpython2.7-minimal', 'libjs-underscore', 'libffi6:amd64', 'python-django', 'python', 'libexpat1:amd64', 'python2.7', 'libssl1.0.0:amd64', 'libpython-stdlib:amd64', 'python2.7-minimal', 'libncursesw5:amd64', 'python-support', 'libjs-jquery', 'libjs-sphinxdoc', 'mime-support', 'libpython2.7-stdlib', 'python-minimal', 'libsqlite3-0:amd64']
8m8.1s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '--purge', 'python-django-filters-doc', 'python-django-filters']
8m8.1s DUMP:
dpkg: warning: ignoring request to remove python-django-filters-doc which isn't installed
dpkg: warning: ignoring request to remove python-django-filters which isn't installed
8m8.1s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '--purge', 'python-django-filters-doc', 'python-django-filters']
8m8.1s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '--purge', '--pending']
8m8.1s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '--purge', '--pending']
8m8.1s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '--remove', '--pending']
8m8.1s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg', '--remove', '--pending']
8m8.1s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg-divert', '--list']
8m8.2s DUMP:
diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash
diversion of /bin/sh to /bin/sh.distrib by dash
8m8.2s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'dpkg-divert', '--list']
8m8.2s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', 'clean']
8m8.2s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'apt-get', 'clean']
8m9.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
8m10.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/tmp/tmpTNTx4a']
8m10.6s DEBUG: Starting command: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'umount', '/proc']
8m10.6s DEBUG: Command ok: ['chroot', '/tmp/tmpTNTx4a', 'eatmydata', 'umount', '/proc']
8m10.8s DEBUG: Removed directory tree at /tmp/tmpTNTx4a
8m10.9s INFO: PASS: Upgrading between Debian distributions.
8m10.9s INFO: PASS: All tests.
8m10.9s INFO: piuparts run ends.
More information about the Piuparts-devel
mailing list