[Pkg-acpi-devel] Bug#523449: acpid: dmesg
Andrea Lorenzetti
hc_andrea at yahoo.it
Sat Apr 11 11:25:16 UTC 2009
Package: acpid
Version: 1.0.8-7
Severity: normal
dmesg attached.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.29-1-686 (SMP w/1 CPU core)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages acpid depends on:
ii libc6 2.9-6 GNU C Library: Shared libraries
ii lsb-base 3.2-22 Linux Standard Base 3.2 init scrip
ii module-init-tools 3.7-pre9-1 tools for managing Linux kernel mo
Versions of packages acpid recommends:
ii acpi-support-base 0.109-11 scripts for handling base ACPI eve
acpid suggests no packages.
-- no debconf information
*** /home/andrea/dmesg.log
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29-1-686 (Debian 2.6.29-2) (waldi at debian.org) (gcc version 4.3.3 (Debian 4.3.3-5) ) #1 SMP Sat Apr 4 17:36:29 UTC 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f780000 (usable)
[ 0.000000] BIOS-e820: 000000003f780000 - 000000003f790000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f790000 - 000000003f7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7d0000 - 000000003f7de000 (reserved)
[ 0.000000] BIOS-e820: 000000003f7e0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x3f780 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37585000 - 37fefd7f
[ 0.000000] Allocated new RAMDISK: 004b4000 - 00f1ed7f
[ 0.000000] Move RAMDISK from 0000000037585000 - 0000000037fefd7e to 004b4000 - 00f1ed7e
[ 0.000000] ACPI: RSDP 000FBE60, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3F780000, 0034 (r1 A M I OEMRSDT 9000811 MSFT 97)
[ 0.000000] ACPI: FACP 3F780200, 0081 (r1 A M I OEMFACP 9000811 MSFT 97)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 3F780400, 6109 (r1 A0979 A0979034 34 INTL 20060113)
[ 0.000000] ACPI: FACS 3F790000, 0040
[ 0.000000] ACPI: APIC 3F780390, 0068 (r1 A M I OEMAPIC 9000811 MSFT 97)
[ 0.000000] ACPI: OEMB 3F790040, 0046 (r1 A M I AMI_OEM 9000811 MSFT 97)
[ 0.000000] ACPI: MCFG 3F786510, 003C (r1 A M I OEMMCFG 9000811 MSFT 97)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00004b0574] TEXT DATA BSS ==> [0000100000 - 00004b0574]
[ 0.000000] #4 [00004b1000 - 00004b4000] INIT_PG_TABLE ==> [00004b1000 - 00004b4000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00004b4000 - 0000f1ed7f] NEW RAMDISK ==> [00004b4000 - 0000f1ed7f]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f780
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f780
[ 0.000000] On node 0 totalpages: 259855
[ 0.000000] free_area_init_node: node 0, pgdat c03bf660, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32386 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 32768 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257823
[ 0.000000] Kernel command line: root=/dev/mapper/vgroot-lvroot ro resume=/dev/sda1 pci=nommconf
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 899.965 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1015584k/1039872k available (1957k kernel code, 23452k reserved, 952k data, 324k init, 130568k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff50000 - 0xfffff000 ( 700 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.004000] .init : 0xc03dd000 - 0xc042e000 ( 324 kB)
[ 0.004000] .data : 0xc02e94c3 - 0xc03d77e8 ( 952 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02e94c3 (1957 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 1799.93 BogoMIPS (lpj=3599860)
[ 0.004243] Security Framework initialized
[ 0.004322] SELinux: Disabled at boot.
[ 0.004418] Mount-cache hash table entries: 512
[ 0.004737] Initializing cgroup subsys ns
[ 0.004817] Initializing cgroup subsys cpuacct
[ 0.004891] Initializing cgroup subsys devices
[ 0.004965] Initializing cgroup subsys freezer
[ 0.005039] Initializing cgroup subsys net_cls
[ 0.005152] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005265] CPU: L2 cache: 512K
[ 0.005336] [ds] using Pentium M configuration
[ 0.005409] [ds] pebs not available
[ 0.005484] Intel machine check architecture supported.
[ 0.005564] Intel machine check reporting enabled on CPU#0.
[ 0.005657] Checking 'hlt' instruction... OK.
[ 0.020663] SMP alternatives: switching to UP code
[ 0.187679] Freeing SMP alternatives: 10k freed
[ 0.187759] ACPI: Core revision 20081204
[ 0.204496] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.247703] CPU0: Intel(R) Celeron(R) M processor 900MHz stepping 08
[ 0.248001] Brought up 1 CPUs
[ 0.248001] Total of 1 processors activated (1799.93 BogoMIPS).
[ 0.248001] CPU0 attaching NULL sched-domain.
[ 0.248001] net_namespace: 1056 bytes
[ 0.248001] Booting paravirtualized kernel on bare hardware
[ 0.248001] regulator: core version 0.5
[ 0.248001] NET: Registered protocol family 16
[ 0.248001] ACPI: bus type pci registered
[ 0.248001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.248001] PCI: Using configuration type 1 for base access
[ 0.249524] bio: create slab <bio-0> at 0
[ 0.251252] ACPI: EC: Look up EC in DSDT
[ 0.266360] ACPI: Interpreter enabled
[ 0.266449] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.266749] ACPI: Using IOAPIC for interrupt routing
[ 0.280185] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.280272] ACPI: EC: driver started in poll mode
[ 0.280669] ACPI: No dock devices found.
[ 0.280895] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.281161] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
[ 0.281171] pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07]
[ 0.281179] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.281187] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
[ 0.281236] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
[ 0.281343] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
[ 0.281398] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.281479] pci 0000:00:1b.0: PME# disabled
[ 0.281620] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.281699] pci 0000:00:1c.0: PME# disabled
[ 0.281840] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.281920] pci 0000:00:1c.1: PME# disabled
[ 0.282060] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.282140] pci 0000:00:1c.2: PME# disabled
[ 0.282267] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f]
[ 0.282329] pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
[ 0.282389] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[ 0.282449] pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f]
[ 0.282514] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
[ 0.282577] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.282658] pci 0000:00:1d.7: PME# disabled
[ 0.282873] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.282884] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.282989] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.283074] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0380-038f
[ 0.283187] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.283197] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.283206] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.283214] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.283224] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.283256] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.283333] pci 0000:00:1f.2: PME# disabled
[ 0.283455] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.283597] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[ 0.283636] pci 0000:03:00.0: reg 30 32bit mmio: [0xfbfa0000-0xfbfbffff]
[ 0.283681] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.283762] pci 0000:03:00.0: PME# disabled
[ 0.283889] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.283946] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[ 0.283956] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[ 0.284024] pci 0000:00:1e.0: transparent bridge
[ 0.284128] pci_bus 0000:00: on NUMA node 0
[ 0.284146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.284450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.284566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.284674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.294853] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.295668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.296563] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.297373] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.298183] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.299089] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.300303] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.301210] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.302622] PCI: Using ACPI for IRQ routing
[ 0.304271] hpet clockevent registered
[ 0.304278] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.304368] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.304597] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.308167] pnp: PnP ACPI init
[ 0.308255] ACPI: bus type pnp registered
[ 0.313008] pnp: PnP ACPI: found 13 devices
[ 0.313084] ACPI: ACPI bus type pnp unregistered
[ 0.313162] PnPBIOS: Disabled by ACPI PNP
[ 0.313257] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.313354] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.313434] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.313514] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.313594] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.313675] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.313757] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.313840] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.313949] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.314032] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.314118] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.314206] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.314294] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.314375] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.314459] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.350004] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.350085] pci 0000:00:1c.0: IO window: disabled
[ 0.350163] pci 0000:00:1c.0: MEM window: disabled
[ 0.350240] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.350321] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.350398] pci 0000:00:1c.1: IO window: disabled
[ 0.350477] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
[ 0.350557] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.350638] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
[ 0.350715] pci 0000:00:1c.2: IO window: disabled
[ 0.350793] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff
[ 0.350874] pci 0000:00:1c.2: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[ 0.350981] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.351058] pci 0000:00:1e.0: IO window: disabled
[ 0.351136] pci 0000:00:1e.0: MEM window: disabled
[ 0.351212] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.351309] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.351393] pci 0000:00:1c.0: setting latency timer to 64
[ 0.351407] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.351489] pci 0000:00:1c.1: setting latency timer to 64
[ 0.351501] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.351583] pci 0000:00:1c.2: setting latency timer to 64
[ 0.351593] pci 0000:00:1e.0: setting latency timer to 64
[ 0.351600] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.351605] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.351611] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[ 0.351615] pci_bus 0000:04: resource 1 mem: [0x0-0x0]
[ 0.351619] pci_bus 0000:04: resource 2 mem: [0x0-0x0]
[ 0.351624] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.351628] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 0.351633] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.351638] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[ 0.351642] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.351647] pci_bus 0000:01: resource 0 mem: [0x0-0x0]
[ 0.351652] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[ 0.351657] pci_bus 0000:01: resource 2 mem: [0xf0000000-0xf6ffffff]
[ 0.351661] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.351666] pci_bus 0000:05: resource 0 mem: [0x0-0x0]
[ 0.351670] pci_bus 0000:05: resource 1 mem: [0x0-0x0]
[ 0.351675] pci_bus 0000:05: resource 2 mem: [0x0-0x0]
[ 0.351679] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.351684] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.351769] NET: Registered protocol family 2
[ 0.352002] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.352655] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.354432] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.355316] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.355399] TCP reno registered
[ 0.355674] NET: Registered protocol family 1
[ 0.355981] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 1.121617] it is
[ 1.964840] Freeing initrd memory: 10667k freed
[ 1.966126] audit: initializing netlink socket (disabled)
[ 1.966231] type=2000 audit(1239441260.964:1): initialized
[ 1.966627] highmem bounce pool size: 64 pages
[ 1.966709] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.966905] VFS: Disk quotas dquot_6.5.2
[ 1.967052] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.967235] msgmni has been set to 1750
[ 1.967556] alg: No test for stdrng (krng)
[ 1.967752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.967858] io scheduler noop registered
[ 1.967930] io scheduler anticipatory registered
[ 1.968027] io scheduler deadline registered
[ 1.968123] io scheduler cfq registered (default)
[ 1.968218] pci 0000:00:02.0: Boot video device
[ 1.968533] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.968605] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 1.968823] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.968889] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 1.969102] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.969167] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 1.969857] isapnp: Scanning for PnP cards...
[ 2.323267] isapnp: No Plug & Play device found
[ 2.330374] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.334536] brd: module loaded
[ 2.334816] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.367353] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.367434] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.367879] mice: PS/2 mouse device common for all mice
[ 2.368097] rtc_cmos 00:03: RTC can wake from S4
[ 2.369240] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.369349] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.369505] cpuidle: using governor ladder
[ 2.369578] cpuidle: using governor menu
[ 2.369656] No iBFT detected.
[ 2.370420] TCP cubic registered
[ 2.370491] NET: Registered protocol family 17
[ 2.370578] Using IPI No-Shortcut mode
[ 2.394115] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.472048] registered taskstats version 1
[ 2.472328] rtc_cmos 00:03: setting system clock to 2009-04-11 09:14:22 UTC (1239441262)
[ 2.472741] Freeing unused kernel memory: 324k freed
[ 2.713736] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.714104] processor ACPI_CPU:00: registered as cooling_device0
[ 2.714187] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.719920] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 2.722209] Marking TSC unstable due to TSC halts in idle
[ 2.723241] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.735887] ACPI: Thermal Zone [TZ00] (52 C)
[ 2.911454] Linux agpgart interface v0.103
[ 2.921955] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 2.922396] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 2.925997] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.989251] usbcore: registered new interface driver usbfs
[ 2.989389] usbcore: registered new interface driver hub
[ 2.990821] usbcore: registered new device driver usb
[ 3.003588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.003732] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.003898] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.003906] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.004103] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.008128] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.008206] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.008233] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 3.046966] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.047105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.047187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.047287] usb usb1: Product: EHCI Host Controller
[ 3.047361] usb usb1: Manufacturer: Linux 2.6.29-1-686 ehci_hcd
[ 3.047438] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.047637] usb usb1: configuration #1 chosen from 1 choice
[ 3.047764] hub 1-0:1.0: USB hub found
[ 3.047847] hub 1-0:1.0: 8 ports detected
[ 3.062325] SCSI subsystem initialized
[ 3.069449] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.069600] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.069690] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.069696] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.069830] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.069963] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 3.070108] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.070189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.070289] usb usb2: Product: UHCI Host Controller
[ 3.070363] usb usb2: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
[ 3.070440] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.070627] usb usb2: configuration #1 chosen from 1 choice
[ 3.070752] hub 2-0:1.0: USB hub found
[ 3.070833] hub 2-0:1.0: 2 ports detected
[ 3.071090] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.071180] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.071185] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.071302] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.071441] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 3.071571] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.071652] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.071752] usb usb3: Product: UHCI Host Controller
[ 3.071826] usb usb3: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
[ 3.071902] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.072096] usb usb3: configuration #1 chosen from 1 choice
[ 3.072223] hub 3-0:1.0: USB hub found
[ 3.072302] hub 3-0:1.0: 2 ports detected
[ 3.072540] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.072627] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.072633] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.072744] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.072883] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 3.073018] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.073098] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.073199] usb usb4: Product: UHCI Host Controller
[ 3.073272] usb usb4: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
[ 3.073349] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.073516] usb usb4: configuration #1 chosen from 1 choice
[ 3.073640] hub 4-0:1.0: USB hub found
[ 3.073719] hub 4-0:1.0: 2 ports detected
[ 3.073975] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.074062] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.074068] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.075405] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.075544] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 3.075675] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.075755] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.075856] usb usb5: Product: UHCI Host Controller
[ 3.075929] usb usb5: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
[ 3.076077] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.076279] usb usb5: configuration #1 chosen from 1 choice
[ 3.076406] hub 5-0:1.0: USB hub found
[ 3.076485] hub 5-0:1.0: 2 ports detected
[ 3.144225] libata version 3.00 loaded.
[ 3.168162] ata_piix 0000:00:1f.2: version 2.12
[ 3.168193] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.168285] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.168571] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.175711] scsi0 : ata_piix
[ 3.175984] scsi1 : ata_piix
[ 3.179404] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.179487] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.356058] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 3.489135] usb 1-5: New USB device found, idVendor=0951, idProduct=1606
[ 3.489224] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 3.489307] usb 1-5: Product: UB6225
[ 3.489377] usb 1-5: Manufacturer: ENE
[ 3.489448] usb 1-5: SerialNumber: 146030377350
[ 3.489670] usb 1-5: configuration #1 chosen from 1 choice
[ 3.512382] ata2.00: CFA: ASUS-PHISON OB SSD, TST2.04P, max UDMA/66
[ 3.512469] ata2.00: 7880544 sectors, multi 0: LBA
[ 3.512614] ata2.01: CFA: ASUS-PHISON SSD, TST2.04P, max UDMA/66
[ 3.512692] ata2.01: 31522176 sectors, multi 0: LBA
[ 3.520354] ata2.00: configured for UDMA/66
[ 3.528314] ata2.01: configured for UDMA/66
[ 3.528589] scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON OB S TST2 PQ: 0 ANSI: 5
[ 3.528995] scsi 1:0:1:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ: 0 ANSI: 5
[ 3.573225] Uniform Multi-Platform E-IDE driver
[ 3.620046] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 3.661839] Initializing USB Mass Storage driver...
[ 3.663937] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3.664767] usbcore: registered new interface driver usb-storage
[ 3.664852] USB Mass Storage support registered.
[ 3.666942] usb-storage: device found at 2
[ 3.666947] usb-storage: waiting for device to settle before scanning
[ 3.686834] Driver 'sd' needs updating - please use bus_type methods
[ 3.687101] sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors: (4.03 GB/3.75 GiB)
[ 3.687230] sd 1:0:0:0: [sda] Write Protect is off
[ 3.687306] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.687353] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.687571] sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors: (4.03 GB/3.75 GiB)
[ 3.687697] sd 1:0:0:0: [sda] Write Protect is off
[ 3.687772] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.687817] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.687925] sda: sda1 sda2 sda3
[ 3.689815] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.690039] sd 1:0:1:0: [sdb] 31522176 512-byte hardware sectors: (16.1 GB/15.0 GiB)
[ 3.690167] sd 1:0:1:0: [sdb] Write Protect is off
[ 3.690243] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.690289] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.690500] sd 1:0:1:0: [sdb] 31522176 512-byte hardware sectors: (16.1 GB/15.0 GiB)
[ 3.690627] sd 1:0:1:0: [sdb] Write Protect is off
[ 3.690702] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.690748] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.690857] sdb: sdb1 sdb2 sdb3
[ 3.692845] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 3.896031] device-mapper: uevent: version 1.0.3
[ 3.896308] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel at redhat.com
[ 4.168758] usb 1-8: New USB device found, idVendor=05e3, idProduct=0505
[ 4.168871] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.168954] usb 1-8: Product: USB 2.0 Camera
[ 4.169217] usb 1-8: configuration #1 chosen from 1 choice
[ 4.263119] PM: Starting manual resume from disk
[ 4.340542] kjournald starting. Commit interval 5 seconds
[ 4.340638] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.804028] Clocksource tsc unstable (delta = -180608025 ns)
[ 6.599361] udev: starting version 140
[ 8.309109] Adding 979924k swap on /dev/sda1. Priority:-1 extents:1 across:979924k
[ 8.416957] EXT3 FS on dm-0, internal journal
[ 8.514418] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 8.544336] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.553385] pciehp 0000:00:1c.0:pcie02: Bypassing BIOS check for pciehp use on 0000:00:1c.0
[ 8.554151] pciehp 0000:00:1c.0:pcie02: HPC vendor_id 8086 device_id 2660 ss_vid 0 ss_did 0
[ 8.554340] pciehp 0000:00:1c.0:pcie02: service driver pciehp loaded
[ 8.554355] pciehp 0000:00:1c.1:pcie02: Bypassing BIOS check for pciehp use on 0000:00:1c.1
[ 8.554473] pciehp 0000:00:1c.1:pcie02: HPC vendor_id 8086 device_id 2662 ss_vid 0 ss_did 0
[ 8.664407] usb-storage: device scan complete
[ 8.664903] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 8.666289] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 9.556380] pciehp 0000:00:1c.1:pcie02: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
[ 9.557093] pciehp 0000:00:1c.1:pcie02: Cannot add device at 0000:03:00
[ 9.557652] pciehp 0000:00:1c.1:pcie02: service driver pciehp loaded
[ 9.557809] pciehp 0000:00:1c.2:pcie02: Bypassing BIOS check for pciehp use on 0000:00:1c.2
[ 9.558550] pciehp 0000:00:1c.2:pcie02: HPC vendor_id 8086 device_id 2664 ss_vid 0 ss_did 0
[ 9.559767] pciehp 0000:00:1c.2:pcie02: service driver pciehp loaded
[ 9.559934] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 9.604039] cfg80211: Using static regulatory domain info
[ 9.604039] cfg80211: Regulatory domain: US
[ 9.604039] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.604039] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 9.604039] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.604039] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.604039] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.604039] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.604039] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 9.604039] cfg80211: Calling CRDA for country: US
[ 10.670168] kjournald starting. Commit interval 5 seconds
[ 10.670701] EXT3 FS on sda2, internal journal
[ 10.672875] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.946585] fuse init (API version 7.11)
[ 11.415371] NET: Registered protocol family 10
[ 11.416388] lo: Disabled Privacy Extensions
[ 13.939082] Bluetooth: Core ver 2.14
[ 13.943810] NET: Registered protocol family 31
[ 13.943918] Bluetooth: HCI device and connection manager initialized
[ 13.944020] Bluetooth: HCI socket layer initialized
[ 14.034736] Bluetooth: L2CAP ver 2.11
[ 14.034839] Bluetooth: L2CAP socket layer initialized
[ 14.072914] Bluetooth: RFCOMM socket layer initialized
[ 14.073038] Bluetooth: RFCOMM TTY layer initialized
[ 14.073137] Bluetooth: RFCOMM ver 1.10
[ 23.006110] lp: driver loaded but no devices found
[ 23.022387] ppdev: user-space parallel port driver
[ 24.394676] RPC: Registered udp transport module.
[ 24.394685] RPC: Registered tcp transport module.
[ 24.487022] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 24.895677] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 24.908818] NFSD: starting 90-second grace period
[ 26.029971] [drm] Initialized drm 1.1.0 20060810
[ 26.166616] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.166628] pci 0000:00:02.0: setting latency timer to 64
[ 26.171445] [drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling.
[ 26.171480] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 36.950518] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[ 58.316851] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 58.494210] usb 3-1: New USB device found, idVendor=046d, idProduct=c00e
[ 58.494593] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 58.494880] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 58.495074] usb 3-1: Manufacturer: Logitech
[ 58.497170] usb 3-1: configuration #1 chosen from 1 choice
[ 67.056084] usbcore: registered new interface driver hiddev
[ 67.164074] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1
[ 67.164074] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 67.164074] usbcore: registered new interface driver usbhid
[ 67.164074] usbhid: v2.6:USB HID core driver
[ 100.089387] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 100.267152] usb 2-2: New USB device found, idVendor=046d, idProduct=c504
[ 100.267507] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 100.267792] usb 2-2: Product: USB Receiver
[ 100.268012] usb 2-2: Manufacturer: Logitech
[ 100.270302] usb 2-2: configuration #1 chosen from 1 choice
[ 100.308076] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
[ 100.308076] generic-usb 0003:046D:C504.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[ 100.348035] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
[ 100.348035] generic-usb 0003:046D:C504.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[ 175.048055] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 175.048055] Copyright (c) 2007 Atheros Corporation.
[ 175.048055] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 175.048055] atl2 0000:03:00.0: setting latency timer to 64
[ 179.964063] atl2 0000:03:00.0: irq 27 for MSI/MSI-X
[ 179.968074] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 180.172034] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 180.172034] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 190.480474] eth0: no IPv6 routers present
[ 244.680086] usb 2-2: USB disconnect, address 2
[ 6493.058057] usb 3-1: USB disconnect, address 2
[ 6498.348989] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 6499.338707] usb 3-1: New USB device found, idVendor=0a12, idProduct=0001
[ 6499.339157] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 6499.339416] usb 3-1: Product: BT2.0
[ 6499.341368] usb 3-1: configuration #1 chosen from 1 choice
[ 6499.700062] Bluetooth: Generic Bluetooth USB driver ver 0.4
[ 6499.703940] usbcore: registered new interface driver btusb
[ 6530.506646] usb 3-1: USB disconnect, address 3
[ 6530.507493] btusb_intr_complete: hci0 urb f666b4c0 failed to resubmit (19)
[ 6530.507493] btusb_bulk_complete: hci0 urb f65f49c0 failed to resubmit (19)
[ 6530.507493] btusb_bulk_complete: hci0 urb f37ebf40 failed to resubmit (19)
[ 6530.512050] btusb_send_frame: hci0 urb f65f4540 submission failed
[ 6530.528058] __set_isoc_interface: hci0 setting interface failed (19)
[ 6534.821109] usb 3-1: new low speed USB device using uhci_hcd and address 4
[ 6535.004061] usb 3-1: New USB device found, idVendor=046d, idProduct=c00e
[ 6535.004061] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6535.004061] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 6535.004061] usb 3-1: Manufacturer: Logitech
[ 6535.005321] usb 3-1: configuration #1 chosen from 1 choice
[ 6535.036071] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
[ 6535.036071] generic-usb 0003:046D:C00E.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 7316.560528] atl2: eth0 NIC Link is Down
[ 7404.009156] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 7404.892097] atl2: eth0 NIC Link is Down
[ 7416.283407] atl2: eth0 NIC Link is Up<10 Mbps Full Duplex>
[ 7433.370383] atl2: eth0 NIC Link is Down
More information about the Pkg-acpi-devel
mailing list