[Pkg-acpi-devel] Bug#772009: acpi: Laptop Lid status (/proc/acpi/button/lid/LID0/state) on Surface Pro remains "closed" after first use
GiH
bobbybig at gmail.com
Thu Dec 4 10:40:32 UTC 2014
Package: acpi
Version: 1.7-1
Severity: normal
Dear Maintainer,
I'am using a MS Surface Pro with Debian Jessie on it. ;-)
At start a status of /proc/acpi/button/lid/LID0/state is "open", but after
first use it changes to "closed" and remains on this status until reboot.
I have tested it with Debian Wheezy, Debian Jessie, Fedora 20, Fedora 21 and
Ubuntu 14.10. All of them have the same behaviour.
/proc/acpi/button/lid/LID0/state remains on "closed".
Wheezy and F20 have no reaction on closing lid, I think because of Gnome 3.10
with Energy Saving Bug. But Jessie and F21 reacts well and believes that lid
stays closed.
The most annoying thing is, that the notebook suspends after ca. 20 seconds
after wake up. Just reboot helps.
My suggestion is: A bug in button mod. It recognize a closing of lid but not
the opening. But how can i disable the reaktion on lid until bug in button mod
will be fixed?
I have also reported in on bugzilla.kernel.org Bug:89211
Thanks for your attention
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.17.4 (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages acpi depends on:
ii libc6 2.19-13
acpi recommends no packages.
acpi suggests no packages.
-- no debconf information
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel at lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=901c317a-7e1d-4e00-a38e-88987e96261c ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d917ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9180000-0x00000000d95f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d95f9000-0x00000000d9608fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d9609000-0x00000000da1d6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da1d7000-0x00000000da5f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da5f4000-0x00000000da685fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000da686000-0x00000000da686fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da687000-0x00000000da6c9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da6ca000-0x00000000dad54fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dad55000-0x00000000daff1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daff2000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xd95fe000 ACPI 2.0=0xd95fe000 SMBIOS=0xda5f2198
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem01: type=4, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002016000) (16MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000002016000-0x0000000020000000) (479MB)
[ 0.000000] efi: mem07: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000020200000-0x0000000036428000) (354MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000036428000-0x000000003720c000) (13MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x000000003720c000-0x0000000040004000) (141MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x00000000a0a45000) (1546MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x00000000a0a45000-0x00000000d6846000) (862MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000d6846000-0x00000000d684c000) (0MB)
[ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x00000000d684c000-0x00000000d686a000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000d686a000-0x00000000d7513000) (12MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000d7513000-0x00000000d7556000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000d7556000-0x00000000d756a000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000d756a000-0x00000000d88ba000) (19MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000d88ba000-0x00000000d8fac000) (6MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x00000000d8fac000-0x00000000d8fb6000) (0MB)
[ 0.000000] efi: mem22: type=3, attr=0xf, range=[0x00000000d8fb6000-0x00000000d9180000) (1MB)
[ 0.000000] efi: mem23: type=0, attr=0xf, range=[0x00000000d9180000-0x00000000d9578000) (3MB)
[ 0.000000] efi: mem24: type=0, attr=0xf, range=[0x00000000d9578000-0x00000000d958e000) (0MB)
[ 0.000000] efi: mem25: type=0, attr=0xf, range=[0x00000000d958e000-0x00000000d959d000) (0MB)
[ 0.000000] efi: mem26: type=0, attr=0xf, range=[0x00000000d959d000-0x00000000d959f000) (0MB)
[ 0.000000] efi: mem27: type=0, attr=0xf, range=[0x00000000d959f000-0x00000000d95a4000) (0MB)
[ 0.000000] efi: mem28: type=0, attr=0xf, range=[0x00000000d95a4000-0x00000000d95f9000) (0MB)
[ 0.000000] efi: mem29: type=9, attr=0xf, range=[0x00000000d95f9000-0x00000000d95fe000) (0MB)
[ 0.000000] efi: mem30: type=9, attr=0xf, range=[0x00000000d95fe000-0x00000000d9609000) (0MB)
[ 0.000000] efi: mem31: type=10, attr=0xf, range=[0x00000000d9609000-0x00000000d9dc6000) (7MB)
[ 0.000000] efi: mem32: type=10, attr=0xf, range=[0x00000000d9dc6000-0x00000000da1d7000) (4MB)
[ 0.000000] efi: mem33: type=6, attr=0x800000000000000f, range=[0x00000000da1d7000-0x00000000da544000) (3MB)
[ 0.000000] efi: mem34: type=6, attr=0x800000000000000f, range=[0x00000000da544000-0x00000000da576000) (0MB)
[ 0.000000] efi: mem35: type=6, attr=0x800000000000000f, range=[0x00000000da576000-0x00000000da578000) (0MB)
[ 0.000000] efi: mem36: type=6, attr=0x800000000000000f, range=[0x00000000da578000-0x00000000da5f4000) (0MB)
[ 0.000000] efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000da5f4000-0x00000000da612000) (0MB)
[ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000da612000-0x00000000da686000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000da686000-0x00000000da687000) (0MB)
[ 0.000000] efi: mem40: type=10, attr=0xf, range=[0x00000000da687000-0x00000000da6ca000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000da6ca000-0x00000000da80e000) (1MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000da80e000-0x00000000dad15000) (5MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000dad15000-0x00000000dad31000) (0MB)
[ 0.000000] efi: mem44: type=3, attr=0xf, range=[0x00000000dad31000-0x00000000dad4b000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x00000000dad4b000-0x00000000dad4d000) (0MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x00000000dad4d000-0x00000000dad4f000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000dad4f000-0x00000000dad55000) (0MB)
[ 0.000000] efi: mem48: type=6, attr=0x800000000000000f, range=[0x00000000dad55000-0x00000000daff2000) (2MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x00000000daff2000-0x00000000db000000) (0MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x0000000100000000-0x000000011f600000) (502MB)
[ 0.000000] efi: mem51: type=0, attr=0x8000000000000000, range=[0x00000000db800000-0x00000000dfa00000) (66MB)
[ 0.000000] efi: mem52: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem53: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem54: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem55: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem56: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem57: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Microsoft Corporation Surface with Windows 8 Pro/Surface with Windows 8 Pro, BIOS 1.06.0350 04/30/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE
[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11f400000-0x11f5fffff]
[ 0.000000] [mem 0x11f400000-0x11f5fffff] page 2M
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11f3fffff]
[ 0.000000] [mem 0x11c000000-0x11f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xd917ffff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xd8ffffff] page 2M
[ 0.000000] [mem 0xd9000000-0xd917ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda686000-0xda686fff]
[ 0.000000] [mem 0xda686000-0xda686fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda6ca000-0xdad54fff]
[ 0.000000] [mem 0xda6ca000-0xda7fffff] page 4k
[ 0.000000] [mem 0xda800000-0xdabfffff] page 2M
[ 0.000000] [mem 0xdac00000-0xdad54fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdaff2000-0xdaffffff]
[ 0.000000] [mem 0xdaff2000-0xdaffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x36428000-0x3720bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000D95FE000 000024 (v02 OEMR )
[ 0.000000] ACPI: XSDT 0x00000000D95FE080 00007C (v01 OEMR O E M R 00000000 OEMR 00010013)
[ 0.000000] ACPI: FACP 0x00000000D9607268 00010C (v05 OEMR O E M R 00000000 OEMR 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D95FE188 0090E0 (v02 OEMR O E M R 00000350 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DA1D5080 000040
[ 0.000000] ACPI: APIC 0x00000000D9607378 000072 (v03 OEMR O E M R 00000000 OEMR 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D96073F0 000044 (v01 OEMR O E M R 00000000 OEMR 00010013)
[ 0.000000] ACPI: MCFG 0x00000000D9607438 00003C (v01 OEMR O E M R 00000000 MSFT 00000097)
[ 0.000000] ACPI: MSDM 0x00000000D9607478 000055 (v03 OEMR O E M R 00000000 OEMR 00010013)
[ 0.000000] ACPI: HPET 0x00000000D96074D0 000038 (v01 OEMR O E M R 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D9607508 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D9607820 0008A2 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000D96080C8 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 0x00000000D9608BF0 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x00000000D9608CA8 000038 (v00 OEMR O E M R 00000000 OEMR 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11f5fffff]
[ 0.000000] NODE_DATA [mem 0x11f5f5000-0x11f5f9fff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xd917ffff]
[ 0.000000] node 0: [mem 0xda686000-0xda686fff]
[ 0.000000] node 0: [mem 0xda6ca000-0xdad54fff]
[ 0.000000] node 0: [mem 0xdaff2000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11f5fffff]
[ 0.000000] On node 0 totalpages: 1018806
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12118 pages used for memmap
[ 0.000000] DMA32 zone: 886297 pages, LIFO batch:31
[ 0.000000] Normal zone: 1757 pages used for memmap
[ 0.000000] Normal zone: 128512 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9180000-0xd95f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd95f9000-0xd9608fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9609000-0xda1d6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda1d7000-0xda5f3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda5f4000-0xda685fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda687000-0xda6c9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdad55000-0xdaff1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011f200000 s85824 r8192 d20672 u524288
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1004852
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=901c317a-7e1d-4e00-a38e-88987e96261c ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3894852K/4075224K available (5191K kernel code, 942K rwdata, 1824K rodata, 1200K init, 840K bss, 180372K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1696.072 MHz processor
[ 0.000049] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.14 BogoMIPS (lpj=6784288)
[ 0.000052] pid_max: default: 32768 minimum: 301
[ 0.000063] ACPI: Core revision 20140424
[ 0.010293] ACPI: All ACPI Tables successfully acquired
[ 0.011518] Security Framework initialized
[ 0.011528] AppArmor: AppArmor disabled by boot time parameter
[ 0.011530] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.011895] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013430] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014115] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014122] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014400] Initializing cgroup subsys memory
[ 0.014405] Initializing cgroup subsys devices
[ 0.014414] Initializing cgroup subsys freezer
[ 0.014417] Initializing cgroup subsys net_cls
[ 0.014423] Initializing cgroup subsys blkio
[ 0.014428] Initializing cgroup subsys perf_event
[ 0.014431] Initializing cgroup subsys net_prio
[ 0.014464] CPU: Physical Processor ID: 0
[ 0.014465] CPU: Processor Core ID: 0
[ 0.014471] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.015049] mce: CPU supports 7 MCE banks
[ 0.015064] CPU0: Thermal monitoring enabled (TM1)
[ 0.015075] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.015235] Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
[ 0.017882] ftrace: allocating 21551 entries in 85 pages
[ 0.031005] dmar: Host address width 36
[ 0.031008] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.031021] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.031023] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.031030] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.031031] dmar: RMRR base: 0x000000d9578000 end: 0x000000d958cfff
[ 0.031033] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.031109] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.031110] HPET id 0 under DRHD base 0xfed91000
[ 0.031112] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.031321] Enabled IRQ remapping in x2apic mode
[ 0.031323] Enabling x2apic
[ 0.031325] Enabled x2apic
[ 0.031334] Switched APIC routing to cluster x2apic.
[ 0.031816] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071518] smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (fam: 06, model: 3a, stepping: 09)
[ 0.071530] TSC deadline timer enabled
[ 0.071564] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.071593] ... version: 3
[ 0.071594] ... bit width: 48
[ 0.071595] ... generic registers: 4
[ 0.071596] ... value mask: 0000ffffffffffff
[ 0.071598] ... max period: 0000ffffffffffff
[ 0.071599] ... fixed-purpose events: 3
[ 0.071600] ... event mask: 000000070000000f
[ 0.073680] x86: Booting SMP configuration:
[ 0.073683] .... node #0, CPUs: #1
[ 0.087398] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.087532] #2 #3
[ 0.115080] x86: Booted up 1 node, 4 CPUs
[ 0.115084] smpboot: Total of 4 processors activated (13568.57 BogoMIPS)
[ 0.119457] devtmpfs: initialized
[ 0.123302] PM: Registering ACPI NVS region [mem 0xd9609000-0xda1d6fff] (12378112 bytes)
[ 0.123640] PM: Registering ACPI NVS region [mem 0xda687000-0xda6c9fff] (274432 bytes)
[ 0.124905] pinctrl core: initialized pinctrl subsystem
[ 0.125012] NET: Registered protocol family 16
[ 0.125181] cpuidle: using governor ladder
[ 0.125184] cpuidle: using governor menu
[ 0.125243] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.125245] ACPI: bus type PCI registered
[ 0.125247] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.125371] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.125374] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.125489] PCI: Using configuration type 1 for base access
[ 0.135839] ACPI: Added _OSI(Module Device)
[ 0.135843] ACPI: Added _OSI(Processor Device)
[ 0.135845] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.135846] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.139201] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.151833] ACPI: Dynamic OEM Table Load:
[ 0.151843] ACPI: SSDT 0xFFFF88011A38A000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.171598] ACPI: Dynamic OEM Table Load:
[ 0.171605] ACPI: SSDT 0xFFFF880119CFDC00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.183444] ACPI: Dynamic OEM Table Load:
[ 0.183450] ACPI: SSDT 0xFFFF88011E839E00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.446791] ACPI: Interpreter enabled
[ 1.446801] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 1.446807] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 1.446826] ACPI: (supports S0 S3 S4 S5)
[ 1.446828] ACPI: Using IOAPIC for interrupt routing
[ 1.446869] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.458241] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 1.459856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.459863] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.460193] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 1.460385] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 1.461120] PCI host bridge to bus 0000:00
[ 1.461124] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.461127] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.461130] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.461132] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.461134] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 1.461136] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 1.461139] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 1.461141] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 1.461143] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.461145] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.461147] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.461150] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.461152] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.461154] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.461156] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 1.461158] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 1.461160] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 1.461163] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 1.461173] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 1.461308] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 1.461324] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 1.461333] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.461340] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 1.461509] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 1.461536] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 1.461612] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.461677] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.461742] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 1.461771] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b00f 64bit]
[ 1.461860] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.461997] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 1.462020] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c18000-0xf7c183ff]
[ 1.462112] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.462195] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.462260] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 1.462279] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[ 1.462359] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.462426] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.462489] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 1.462515] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
[ 1.462621] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.462703] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.462771] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 1.463002] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 1.463027] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 1.463038] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 1.463048] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 1.463059] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 1.463070] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 1.463079] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c16000-0xf7c167ff]
[ 1.463135] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.463249] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 1.463270] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
[ 1.463296] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 1.463418] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 1.465168] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.465244] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.465321] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.465394] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.465465] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.465541] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.465615] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.465689] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.465869] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 1.465931] ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 1.466071] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.466074] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.466077] vgaarb: loaded
[ 1.466078] vgaarb: bridge control possible 0000:00:02.0
[ 1.466222] PCI: Using ACPI for IRQ routing
[ 1.468149] PCI: pci_cache_line_size set to 64 bytes
[ 1.468197] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 1.468199] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 1.468201] e820: reserve RAM buffer [mem 0xd9180000-0xdbffffff]
[ 1.468204] e820: reserve RAM buffer [mem 0xda687000-0xdbffffff]
[ 1.468207] e820: reserve RAM buffer [mem 0xdad55000-0xdbffffff]
[ 1.468209] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 1.468211] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[ 1.468399] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.468406] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.470444] Switched to clocksource hpet
[ 1.476954] pnp: PnP ACPI init
[ 1.476975] ACPI: bus type PNP registered
[ 1.477086] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.477090] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.477197] system 00:01: [io 0x0680-0x069f] has been reserved
[ 1.477200] system 00:01: [io 0x1000-0x100f] has been reserved
[ 1.477203] system 00:01: [io 0xffff] has been reserved
[ 1.477205] system 00:01: [io 0xffff] has been reserved
[ 1.477208] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 1.477211] system 00:01: [io 0x0458-0x047f] has been reserved
[ 1.477213] system 00:01: [io 0x0500-0x057f] has been reserved
[ 1.477216] system 00:01: [io 0x164e-0x164f] has been reserved
[ 1.477219] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.477269] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.477334] system 00:03: [io 0x0454-0x0457] has been reserved
[ 1.477338] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.477405] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 1.477408] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.477719] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.477723] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.477725] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.477728] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.477731] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.477733] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.477736] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 1.477739] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.477742] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 1.477745] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.477747] system 00:05: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 1.477750] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.479165] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 1.479168] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ 1.479171] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.479218] pnp: PnP ACPI: found 7 devices
[ 1.479220] ACPI: bus type PNP unregistered
[ 1.486768] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.486771] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.486773] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.486776] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.486778] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.486780] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.486782] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 1.486785] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 1.486787] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 1.486789] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 1.486791] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 1.486793] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 1.486796] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 1.486798] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 1.486800] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 1.486802] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 1.486804] pci_bus 0000:00: resource 20 [mem 0xdfa00000-0xfeafffff]
[ 1.486888] NET: Registered protocol family 2
[ 1.487207] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.487316] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.487393] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.487413] TCP: reno registered
[ 1.487423] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.487443] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.487540] NET: Registered protocol family 1
[ 1.487560] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.487572] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 1.487840] pci 0000:00:1a.0: enabling device (0000 -> 0002)
[ 1.506618] PCI: CLS 64 bytes, default 64
[ 1.506674] Unpacking initramfs...
[ 1.878484] Freeing initrd memory: 14224K (ffff880036428000 - ffff88003720c000)
[ 1.878576] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.878580] software IO TLB [mem 0xd3513000-0xd7513000] (64MB) mapped at [ffff8800d3513000-ffff8800d7512fff]
[ 1.878968] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 1.879026] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x13
[ 1.879039] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x13
[ 1.879050] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x13
[ 1.879065] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x13
[ 1.879148] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 1.879575] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.879622] audit: initializing netlink subsys (disabled)
[ 1.879648] audit: type=2000 audit(1417623316.872:1): initialized
[ 1.880155] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.880186] zbud: loaded
[ 1.880458] VFS: Disk quotas dquot_6.5.2
[ 1.880481] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.880549] msgmni has been set to 7690
[ 1.880987] alg: No test for stdrng (krng)
[ 1.881023] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.881090] io scheduler noop registered
[ 1.881094] io scheduler deadline registered
[ 1.881148] io scheduler cfq registered (default)
[ 1.881263] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.881287] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.881371] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x7e9000 bytes, mapped to 0xffffc90004780000
[ 1.881375] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[ 1.888103] Console: switching to colour frame buffer device 240x67
[ 1.894688] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 1.894701] intel_idle: MWAIT substates: 0x21120
[ 1.894703] intel_idle: v0.4 model 0x3A
[ 1.894704] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.894994] GHES: HEST is not enabled!
[ 1.895105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.895732] Linux agpgart interface v0.103
[ 1.895881] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.447993] i8042: Can't read CTR while initializing i8042
[ 2.448036] i8042: probe of i8042 failed with error -5
[ 2.448181] mousedev: PS/2 mouse device common for all mice
[ 2.448228] rtc_cmos 00:02: RTC can wake from S4
[ 2.448395] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.448434] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.448448] Intel P-state driver initializing.
[ 2.448469] Intel pstate controlling: cpu 0
[ 2.448493] Intel pstate controlling: cpu 1
[ 2.448576] Intel pstate controlling: cpu 2
[ 2.448682] Intel pstate controlling: cpu 3
[ 2.448760] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.449143] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel at amd.com>
[ 2.449146] AMD IOMMUv2 functionality not available on this system
[ 2.449393] TCP: cubic registered
[ 2.449596] NET: Registered protocol family 10
[ 2.450075] mip6: Mobile IPv6
[ 2.450083] NET: Registered protocol family 17
[ 2.450095] mpls_gso: MPLS GSO support
[ 2.450944] registered taskstats version 1
[ 2.451740] rtc_cmos 00:02: setting system clock to 2014-12-03 16:15:18 UTC (1417623318)
[ 2.451991] PM: Hibernation image not present or could not be loaded.
[ 2.453790] Freeing unused kernel memory: 1200K (ffffffff818ed000 - ffffffff81a19000)
[ 2.453794] Write protecting the kernel read-only data: 8192k
[ 2.458849] Freeing unused kernel memory: 940K (ffff880001515000 - ffff880001600000)
[ 2.460030] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
[ 2.539944] systemd-udevd[73]: starting version 215
[ 2.540417] random: systemd-udevd urandom read with 6 bits of entropy available
[ 2.560877] ACPI: bus type USB registered
[ 2.560961] usbcore: registered new interface driver usbfs
[ 2.560977] usbcore: registered new interface driver hub
[ 2.561148] usbcore: registered new device driver usb
[ 2.562235] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.562243] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.562347] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.562373] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 2.562473] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.562476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.562479] usb usb1: Product: xHCI Host Controller
[ 2.562481] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 2.562483] usb usb1: SerialNumber: 0000:00:14.0
[ 2.562651] [Firmware Bug]: Invalid critical threshold (86)
[ 2.562701] hub 1-0:1.0: USB hub found
[ 2.562721] hub 1-0:1.0: 4 ports detected
[ 2.563184] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.563188] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.563199] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.563244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.563247] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.563249] usb usb2: Product: xHCI Host Controller
[ 2.563252] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 2.563254] usb usb2: SerialNumber: 0000:00:14.0
[ 2.563431] hub 2-0:1.0: USB hub found
[ 2.563450] hub 2-0:1.0: 4 ports detected
[ 2.563477] ehci-pci: EHCI PCI platform driver
[ 2.563519] SCSI subsystem initialized
[ 2.564071] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.564078] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.564093] ehci-pci 0000:00:1a.0: debug port 2
[ 2.568000] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.568289] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c18000
[ 2.568880] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.568883] ACPI: Thermal Zone [TZ0] (-267 C)
[ 2.571105] libata version 3.00 loaded.
[ 2.578989] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.579026] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.579028] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.579029] usb usb3: Product: EHCI Host Controller
[ 2.579031] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.579032] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.579204] hub 3-0:1.0: USB hub found
[ 2.579210] hub 3-0:1.0: 2 ports detected
[ 2.579486] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.579491] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.579507] ehci-pci 0000:00:1d.0: debug port 2
[ 2.583415] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.583460] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
[ 2.594979] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.595012] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.595015] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.595029] usb usb4: Product: EHCI Host Controller
[ 2.595031] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.595032] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.595172] hub 4-0:1.0: USB hub found
[ 2.595177] hub 4-0:1.0: 2 ports detected
[ 2.595321] ahci 0000:00:1f.2: version 3.0
[ 2.595480] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 2.595528] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 2.595531] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 2.596452] scsi0 : ahci
[ 2.596591] scsi1 : ahci
[ 2.596695] scsi2 : ahci
[ 2.596798] scsi3 : ahci
[ 2.596897] scsi4 : ahci
[ 2.596996] scsi5 : ahci
[ 2.597040] ata1: SATA max UDMA/133 abar m2048 at 0xf7c16000 port 0xf7c16100 irq 43
[ 2.597042] ata2: DUMMY
[ 2.597043] ata3: DUMMY
[ 2.597044] ata4: DUMMY
[ 2.597044] ata5: DUMMY
[ 2.597045] ata6: DUMMY
[ 2.875248] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 2.879185] tsc: Refined TSC clocksource calibration: 1696.147 MHz
[ 2.915199] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.915595] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 2.915611] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88011e852a18), AE_NOT_FOUND (20140424/psparse-536)
[ 2.915756] ata1.00: ATA-9: C400-MTFDDAT064MAM, 07MH, max UDMA/100
[ 2.915762] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.916219] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 2.916235] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88011e852a18), AE_NOT_FOUND (20140424/psparse-536)
[ 2.916375] ata1.00: configured for UDMA/100
[ 2.916745] scsi 0:0:0:0: Direct-Access ATA C400-MTFDDAT064M 07MH PQ: 0 ANSI: 5
[ 2.923997] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.924455] sd 0:0:0:0: [sda] Write Protect is off
[ 2.924462] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.924634] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.927655] sda: sda1 sda2 sda3 sda4
[ 2.928662] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.929623] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.978168] PM: Starting manual resume from disk
[ 2.978176] PM: Hibernation image partition 8:3 present
[ 2.978178] PM: Looking for hibernation image.
[ 2.978429] PM: Image not found (code -22)
[ 2.978432] PM: Hibernation image not present or could not be loaded.
[ 2.981826] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 2.981832] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[ 2.981847] PM: Marking nosave pages: [mem 0x40004000-0x40004fff]
[ 2.981849] PM: Marking nosave pages: [mem 0xd9180000-0xda685fff]
[ 2.981980] PM: Marking nosave pages: [mem 0xda687000-0xda6c9fff]
[ 2.981984] PM: Marking nosave pages: [mem 0xdad55000-0xdaff1fff]
[ 2.982002] PM: Marking nosave pages: [mem 0xdb000000-0xffffffff]
[ 2.983004] PM: Basic memory bitmaps created
[ 3.008289] usb 1-2: New USB device found, idVendor=045e, idProduct=0773
[ 3.008295] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.008298] usb 1-2: Product: Microsoft? Nano Transceiver v1.0
[ 3.008301] usb 1-2: Manufacturer: Microsoft
[ 3.010635] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.014593] PM: Basic memory bitmaps freed
[ 3.023853] usbcore: registered new interface driver usbhid
[ 3.023857] usbhid: USB HID core driver
[ 3.024804] input: Microsoft Microsoft? Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:045E:0773.0001/input/input0
[ 3.025030] hid-generic 0003:045E:0773.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft? Nano Transceiver v1.0] on usb-0000:00:14.0-2/input0
[ 3.025291] input: Microsoft Microsoft? Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:045E:0773.0002/input/input1
[ 3.025401] hid-generic 0003:045E:0773.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft? Nano Transceiver v1.0] on usb-0000:00:14.0-2/input1
[ 3.025818] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.034863] input: Microsoft Microsoft? Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:045E:0773.0003/input/input2
[ 3.035103] hid-generic 0003:045E:0773.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft? Nano Transceiver v1.0] on usb-0000:00:14.0-2/input2
[ 3.175316] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 3.216608] lp: driver loaded but no devices found
[ 3.218011] ppdev: user-space parallel port driver
[ 3.222254] fuse init (API version 7.23)
[ 3.225669] systemd-udevd[188]: starting version 215
[ 3.300030] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C0D:00/input/input3
[ 3.300065] ACPI: Lid Switch [LID0]
[ 3.302815] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.302821] ACPI: Power Button [PWRF]
[ 3.303392] ACPI: AC Adapter [AC0] (on-line)
[ 3.306052] usb 1-3: New USB device found, idVendor=1286, idProduct=2043
[ 3.306057] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.306059] usb 1-3: Product: Marvell Wireless Device
[ 3.306062] usb 1-3: Manufacturer: Marvell
[ 3.306064] usb 1-3: SerialNumber: 0000000000000000
[ 3.312536] [drm] Initialized drm 1.1.0 20060810
[ 3.322204] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 3.326322] ACPI: Battery Slot [BAT0] (battery present)
[ 3.329588] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[ 3.329596] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.329600] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[ 3.329604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.329606] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[ 3.329610] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.329612] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[ 3.329619] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.329620] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.329687] EFI Variables Facility v0.08 2004-May-17
[ 3.331877] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 3.331883] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.333809] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.343839] [drm] Memory usable by graphics device = 2048M
[ 3.343842] [drm] Replacing VGA console driver
[ 3.343846] checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
[ 3.343848] fb: switching to inteldrmfb from simple
[ 3.343884] Console: switching to colour dummy device 80x25
[ 3.353881] AVX version of gcm_enc/dec engaged.
[ 3.367533] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 3.367548] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.367549] [drm] Driver supports precise vblank timestamp query.
[ 3.367697] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.368510] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 3.377915] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 3.391836] pstore: Registered efi as persistent store backend
[ 3.392101] iTCO_vendor_support: vendor-support=0
[ 3.392747] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.392785] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.393570] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.394667] alg: No test for crc32 (crc32-pclmul)
[ 3.407892] intel_rapl: RAPL domain dram detection failed
[ 3.413470] fbcon: inteldrmfb (fb0) is primary device
[ 3.420390] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.428727] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k SSFS
[ 3.455356] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.464098] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 3.538598] usb 2-1: New USB device found, idVendor=0bda, idProduct=0307
[ 3.538599] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.538600] usb 2-1: Product: USB3.0 Card Reader
[ 3.538601] usb 2-1: Manufacturer: Realtek
[ 3.538602] usb 2-1: SerialNumber: 201006010301
[ 3.552633] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3.552801] scsi6 : usb-storage 2-1:1.0
[ 3.552903] usbcore: registered new interface driver usb-storage
[ 3.655627] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 3.788381] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.788385] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.788978] hub 3-1:1.0: USB hub found
[ 3.789224] hub 3-1:1.0: 6 ports detected
[ 3.879895] Switched to clocksource tsc
[ 3.903699] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 4.036480] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.036484] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.037105] hub 4-1:1.0: USB hub found
[ 4.037333] hub 4-1:1.0: 8 ports detected
[ 4.076471] Console: switching to colour frame buffer device 240x67
[ 4.088321] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.088323] i915 0000:00:02.0: registered panic notifier
[ 4.089078] systemd-journald[172]: Received request to flush runtime journal from PID 1
[ 4.111813] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[ 4.114188] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.114364] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 4.114558] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.114668] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 4.115413] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 4.133747] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.133755] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.133761] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 4.133765] sound hdaudioC0D0: mono: mono_out=0x0
[ 4.133768] sound hdaudioC0D0: inputs:
[ 4.133773] sound hdaudioC0D0: Mic=0x1a
[ 4.133778] sound hdaudioC0D0: Internal Mic=0x12
[ 4.140054] RPC: Registered named UNIX socket transport module.
[ 4.140058] RPC: Registered udp transport module.
[ 4.140060] RPC: Registered tcp transport module.
[ 4.140062] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.143749] FS-Cache: Loaded
[ 4.145737] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.145879] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.146007] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.152983] FS-Cache: Netfs 'nfs' registered for caching
[ 4.161784] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 4.220342] usb 3-1.1: New USB device found, idVendor=045e, idProduct=0795
[ 4.220345] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.220347] usb 3-1.1: Product: Rear LifeCam
[ 4.220349] usb 3-1.1: Manufacturer: Microsoft
[ 4.226051] media: Linux media interface: v0.10
[ 4.228149] Linux video capture interface: v2.00
[ 4.232046] uvcvideo: Found UVC 1.00 device Rear LifeCam (045e:0795)
[ 4.274922] random: nonblocking pool is initialized
[ 4.297604] input: Rear LifeCam as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input10
[ 4.297663] usbcore: registered new interface driver uvcvideo
[ 4.297664] USB Video Class driver (1.1.1)
[ 4.315887] usb 4-1.5: new full-speed USB device number 3 using ehci-pci
[ 4.411679] usb 4-1.5: New USB device found, idVendor=045e, idProduct=079c
[ 4.411685] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.411687] usb 4-1.5: Product: SAM
[ 4.411690] usb 4-1.5: Manufacturer: MICROSOFT
[ 4.411692] usb 4-1.5: SerialNumber: 0.1.0000
[ 4.431199] usbhid 4-1.5:1.0: can't add hid device: -75
[ 4.431237] usbhid: probe of 4-1.5:1.0 failed with error -75
[ 4.432110] cfg80211: Calling CRDA to update world regulatory domain
[ 4.433767] hid-generic 0003:045E:079C.0004: item fetching failed at offset -756199439
[ 4.433833] hid-generic: probe of 0003:045E:079C.0004 failed with error -22
[ 4.436840] usbcore: registered new interface driver mwifiex_usb
[ 4.438475] input: MICROSOFT SAM as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.2/0003:045E:079C.0005/input/input11
[ 4.439537] hid-generic 0003:045E:079C.0005: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [MICROSOFT SAM] on usb-0000:00:1d.0-1.5/input2
[ 4.443244] usb 1-3: firmware: direct-loading firmware mrvl/usb8797_uapsta.bin
[ 4.460609] cfg80211: World regulatory domain updated:
[ 4.460612] cfg80211: DFS Master region: unset
[ 4.460614] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.460616] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.460617] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.460619] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.460620] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.460621] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.460623] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.460624] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.460626] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.507980] usb 4-1.6: new full-speed USB device number 4 using ehci-pci
[ 4.566868] scsi 6:0:0:0: Direct-Access Generic- USB3.0 CRW -SD 1.00 PQ: 0 ANSI: 6
[ 4.567446] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 4.609487] usb 4-1.6: New USB device found, idVendor=03eb, idProduct=8209
[ 4.609491] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.609494] usb 4-1.6: Product: Atmel maXTouch Digitizer
[ 4.609496] usb 4-1.6: Manufacturer: Atmel
[ 4.620542] hid-generic 0003:03EB:8209.0007: hiddev0,hidraw4: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1d.0-1.6/input1
[ 4.627840] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:03EB:8209.0006/input/input12
[ 4.628060] hid-multitouch 0003:03EB:8209.0006: input,hidraw5: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1d.0-1.6/input0
[ 4.692079] usb 4-1.7: new high-speed USB device number 5 using ehci-pci
[ 4.804604] usb 4-1.7: New USB device found, idVendor=045e, idProduct=0794
[ 4.804607] usb 4-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.804609] usb 4-1.7: Product: Front LifeCam
[ 4.804611] usb 4-1.7: Manufacturer: Microsoft
[ 4.805767] uvcvideo: Found UVC 1.00 device Front LifeCam (045e:0794)
[ 4.824356] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 4.871253] input: Front LifeCam as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.0/input/input13
[ 5.600984] usb 1-3: USB disconnect, device number 3
[ 5.601031] mwifiex_usb: mwifiex_usb_disconnect: card or card->adapter is NULL
[ 5.877404] sd 6:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 5.880228] sd 6:0:0:0: [sdb] Write Protect is off
[ 5.880231] sd 6:0:0:0: [sdb] Mode Sense: 2f 00 00 00
[ 5.883157] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.898422] sdb: sdb1
[ 5.901683] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.288728] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[ 6.417792] usb 1-3: New USB device found, idVendor=1286, idProduct=2044
[ 6.417796] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.417798] usb 1-3: Product: Bluetooth and Wireless LAN Composite Device
[ 6.417799] usb 1-3: Manufacturer: Marvell
[ 6.417801] usb 1-3: SerialNumber: 6045BDF5301A
[ 6.417920] usb 1-3: ep 0x4 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 6.421515] usb 1-3: firmware: direct-loading firmware mrvl/usb8797_uapsta.bin
[ 6.421542] usb 1-3: WLAN FW is active
[ 6.432718] Bluetooth: Core ver 2.19
[ 6.432912] NET: Registered protocol family 31
[ 6.432914] Bluetooth: HCI device and connection manager initialized
[ 6.432923] Bluetooth: HCI socket layer initialized
[ 6.432926] Bluetooth: L2CAP socket layer initialized
[ 6.432938] Bluetooth: SCO socket layer initialized
[ 6.440960] usbcore: registered new interface driver btusb
[ 6.657454] ieee80211 phy0: ignoring F/W country code EU
[ 6.658789] usb 1-3: driver_version = mwifiex 1.0 (14.69.11.p179)
[ 6.778916] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.778919] Bluetooth: BNEP filters: protocol multicast
[ 6.778927] Bluetooth: BNEP socket layer initialized
[ 22.346610] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
-------------------------------------------------------------------------------------------------------------------------------------
LID CLOSED HERE
-------------------------------------------------------------------------------------------------------------------------------------
[ 529.534867] cfg80211: Calling CRDA to update world regulatory domain
[ 529.537126] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
[ 529.540430] cfg80211: World regulatory domain updated:
[ 529.540435] cfg80211: DFS Master region: unset
[ 529.540436] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 529.540439] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 529.540442] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 529.540444] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 529.540446] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 529.540449] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 529.540451] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 529.540452] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 529.540455] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 530.592802] PM: Syncing filesystems ... done.
[ 530.602659] PM: Preparing system for mem sleep
[ 530.602884] (NULL device *): firmware: direct-loading firmware mrvl/usb8797_uapsta.bin
[ 530.602892] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 530.604299] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 530.605377] PM: Entering mem sleep
[ 530.605835] Suspending console(s) (use no_console_suspend to debug)
[ 530.605950] usb 1-3: None of the WOWLAN triggers enabled
[ 530.606247] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 530.607395] sd 0:0:0:0: [sda] Stopping disk
[ 531.121827] PM: suspend of devices complete after 515.667 msecs
[ 531.137690] PM: late suspend of devices complete after 15.848 msecs
[ 531.138370] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 531.138415] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 531.138534] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 531.153628] PM: noirq suspend of devices complete after 15.928 msecs
[ 531.153850] ACPI: Preparing to enter system sleep state S3
[ 531.154023] PM: Saving platform NVS memory
[ 531.162275] Disabling non-boot CPUs ...
[ 531.162331] intel_pstate CPU 1 exiting
[ 531.163489] kvm: disabling virtualization on CPU1
[ 531.265656] smpboot: CPU 1 is now offline
[ 531.266313] intel_pstate CPU 2 exiting
[ 531.267649] kvm: disabling virtualization on CPU2
[ 531.369709] smpboot: CPU 2 is now offline
[ 531.370348] intel_pstate CPU 3 exiting
[ 531.370553] Broke affinity for irq 16
[ 531.371590] kvm: disabling virtualization on CPU3
[ 531.473786] smpboot: CPU 3 is now offline
[ 531.476214] ACPI: Low-level resume complete
[ 531.476266] PM: Restoring platform NVS memory
[ 531.479026] Enabling non-boot CPUs ...
[ 531.479166] x86: Booting SMP configuration:
[ 531.479167] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 531.490743] kvm: enabling virtualization on CPU1
[ 531.493008] Intel pstate controlling: cpu 1
[ 531.493083] CPU1 is up
[ 531.493184] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 531.504743] kvm: enabling virtualization on CPU2
[ 531.507029] Intel pstate controlling: cpu 2
[ 531.507083] CPU2 is up
[ 531.507162] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 531.518686] kvm: enabling virtualization on CPU3
[ 531.520882] Intel pstate controlling: cpu 3
[ 531.520935] CPU3 is up
[ 531.528905] ACPI: Waking up from system sleep state S3
[ 531.970741] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 531.970764] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 531.970975] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 531.971081] PM: noirq resume of devices complete after 16.107 msecs
[ 531.971710] PM: early resume of devices complete after 0.574 msecs
[ 531.971816] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 531.972090] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 531.985900] sd 0:0:0:0: [sda] Starting disk
[ 532.194911] usb 4-1.6: reset full-speed USB device number 4 using ehci-pci
[ 532.195895] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 532.256770] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d8759700
[ 532.256773] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d8759748
[ 532.295292] PM: resume of devices complete after 323.440 msecs
[ 532.295640] PM: Finishing wakeup.
[ 532.295643] Restarting tasks ... done.
[ 532.302672] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 532.303025] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 532.303035] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88011e852a18), AE_NOT_FOUND (20140424/psparse-536)
[ 532.303484] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 532.303494] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88011e852a18), AE_NOT_FOUND (20140424/psparse-536)
[ 532.303598] ata1.00: configured for UDMA/100
[ 532.339227] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
[ 533.062994] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 536.394195] IPv6: ADDRCONF(NETDEV_CHANGE): mlan0: link becomes ready
-------------------------------------------------------------------------------------------------------------------------------------
AUTOMATICALLY SUSPEND W/O USER ACTIVITY
-------------------------------------------------------------------------------------------------------------------------------------
[ 560.873162] cfg80211: Calling CRDA to update world regulatory domain
[ 560.876045] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
[ 560.877691] cfg80211: World regulatory domain updated:
[ 560.877697] cfg80211: DFS Master region: unset
[ 560.877698] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 560.877701] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 560.877703] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 560.877705] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 560.877707] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 560.877709] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 560.877711] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 560.877713] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 560.877715] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 561.957315] PM: Syncing filesystems ... done.
[ 561.981591] PM: Preparing system for mem sleep
[ 561.981826] (NULL device *): firmware: direct-loading firmware mrvl/usb8797_uapsta.bin
[ 561.981836] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 561.982906] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 561.983989] PM: Entering mem sleep
[ 561.984442] Suspending console(s) (use no_console_suspend to debug)
[ 561.984561] usb 1-3: None of the WOWLAN triggers enabled
[ 561.984792] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 561.988539] sd 0:0:0:0: [sda] Stopping disk
[ 562.503201] PM: suspend of devices complete after 518.428 msecs
[ 562.519199] PM: late suspend of devices complete after 15.967 msecs
[ 562.520159] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 562.520319] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 562.520324] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 562.535211] PM: noirq suspend of devices complete after 15.997 msecs
[ 562.535900] ACPI: Preparing to enter system sleep state S3
[ 562.536346] PM: Saving platform NVS memory
[ 562.558824] Disabling non-boot CPUs ...
[ 562.558930] intel_pstate CPU 1 exiting
[ 562.560365] kvm: disabling virtualization on CPU1
[ 562.663153] smpboot: CPU 1 is now offline
[ 562.663790] intel_pstate CPU 2 exiting
[ 562.665140] kvm: disabling virtualization on CPU2
[ 562.767192] smpboot: CPU 2 is now offline
[ 562.767878] intel_pstate CPU 3 exiting
[ 562.768131] Broke affinity for irq 42
[ 562.769158] kvm: disabling virtualization on CPU3
[ 562.871237] smpboot: CPU 3 is now offline
[ 562.873689] ACPI: Low-level resume complete
[ 562.873743] PM: Restoring platform NVS memory
[ 562.876558] Enabling non-boot CPUs ...
[ 562.876699] x86: Booting SMP configuration:
[ 562.876701] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 562.888279] kvm: enabling virtualization on CPU1
[ 562.890546] Intel pstate controlling: cpu 1
[ 562.890619] CPU1 is up
[ 562.890716] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 562.902285] kvm: enabling virtualization on CPU2
[ 562.904576] Intel pstate controlling: cpu 2
[ 562.904633] CPU2 is up
[ 562.904714] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 562.916242] kvm: enabling virtualization on CPU3
[ 562.918533] Intel pstate controlling: cpu 3
[ 562.918590] CPU3 is up
[ 562.925939] ACPI: Waking up from system sleep state S3
[ 563.364428] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 563.364629] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 563.364706] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 563.364954] PM: noirq resume of devices complete after 16.479 msecs
[ 563.365657] PM: early resume of devices complete after 0.661 msecs
[ 563.365767] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 563.366356] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 563.367514] sd 0:0:0:0: [sda] Starting disk
[ 563.576333] usb 4-1.6: reset full-speed USB device number 4 using ehci-pci
[ 563.581689] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 563.642299] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d8759700
[ 563.642304] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d8759748
[ 563.677399] PM: resume of devices complete after 311.589 msecs
[ 563.677835] PM: Finishing wakeup.
[ 563.677838] Restarting tasks ...
[ 563.685147] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 563.685728] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 563.685742] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88011e852a18), AE_NOT_FOUND (20140424/psparse-536)
[ 563.686237] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 563.686250] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88011e852a18), AE_NOT_FOUND (20140424/psparse-536)
[ 563.686361] ata1.00: configured for UDMA/100
[ 563.688677] done.
[ 563.728506] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
[ 565.068741] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 567.773062] IPv6: ADDRCONF(NETDEV_CHANGE): mlan0: link becomes ready
More information about the Pkg-acpi-devel
mailing list