[Pkg-acpi-devel] Bug#842224: acpi: Possible ACPI/Backlight problem or even MEDION bios issue
Justice
just12000-131 at yahoo.co.uk
Thu Oct 27 05:29:37 UTC 2016
Package: acpi
Version: 1.7-1
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
changing the original windows home edition that came with the laptop
* What exactly did you do (or not do) that was effective (or
ineffective)?
Installed various flavour of Linux and various versions of windows,
installed various acpi and display drivers in both Linux and windows.
* What was the outcome of this action?
broken OSs, issue persisted
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- System Information:
Debian Release: 8.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages acpi depends on:
ii libc6 2.19-18+deb8u6
acpi recommends no packages.
acpi suggests no packages.
-- no debconf information
-------------- next part --------------
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002200000-0x0000000003118000) (15MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000003118000-0x0000000020000000) (462MB)
[ 0.000000] efi: mem10: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000020200000-0x0000000036162000) (351MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x0000000036162000-0x00000000370a9000) (15MB)
[ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x00000000370a9000-0x0000000040004000) (143MB)
[ 0.000000] efi: mem14: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x0000000040005000-0x00000000891cf000) (1169MB)
[ 0.000000] efi: mem16: type=2, attr=0xf, range=[0x00000000891cf000-0x00000000bb0cb000) (798MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000bb0cb000-0x00000000bb0d1000) (0MB)
[ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000bb0d1000-0x00000000bb0ef000) (0MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000bb0ef000-0x00000000c7bca000) (202MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000c7bca000-0x00000000c7d85000) (1MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000c7d85000-0x00000000c7d87000) (0MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x00000000c7d87000-0x00000000c7d9b000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c7d9b000-0x00000000c7da2000) (0MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000c7da2000-0x00000000c7dfb000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c7dfb000-0x00000000c7e00000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000c7e00000-0x00000000c806c000) (2MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c806c000-0x00000000c806e000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000c806e000-0x00000000c8a22000) (9MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000c8a22000-0x00000000c8e53000) (4MB)
[ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x00000000c8e53000-0x00000000c8e5d000) (0MB)
[ 0.000000] efi: mem31: type=3, attr=0xf, range=[0x00000000c8e5d000-0x00000000c9122000) (2MB)
[ 0.000000] efi: mem32: type=0, attr=0xf, range=[0x00000000c9122000-0x00000000c94ab000) (3MB)
[ 0.000000] efi: mem33: type=0, attr=0xf, range=[0x00000000c94ab000-0x00000000c987a000) (3MB)
[ 0.000000] efi: mem34: type=9, attr=0xf, range=[0x00000000c987a000-0x00000000c987f000) (0MB)
[ 0.000000] efi: mem35: type=9, attr=0xf, range=[0x00000000c987f000-0x00000000c9895000) (0MB)
[ 0.000000] efi: mem36: type=10, attr=0xf, range=[0x00000000c9895000-0x00000000c99f8000) (1MB)
[ 0.000000] efi: mem37: type=10, attr=0xf, range=[0x00000000c99f8000-0x00000000c9e38000) (4MB)
[ 0.000000] efi: mem38: type=6, attr=0x800000000000000f, range=[0x00000000c9e38000-0x00000000ca46f000) (6MB)
[ 0.000000] efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000ca46f000-0x00000000ca858000) (3MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000ca858000-0x00000000ca88b000) (0MB)
[ 0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000ca88b000-0x00000000ca900000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000ca900000-0x00000000ca901000) (0MB)
[ 0.000000] efi: mem43: type=10, attr=0xf, range=[0x00000000ca901000-0x00000000ca944000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000ca944000-0x00000000caa8d000) (1MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000caa8d000-0x00000000cad1f000) (2MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000cad1f000-0x00000000cad31000) (0MB)
[ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x00000000cad31000-0x00000000cad43000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000cad43000-0x00000000cad4a000) (0MB)
[ 0.000000] efi: mem49: type=6, attr=0x800000000000000f, range=[0x00000000cad4a000-0x00000000caff1000) (2MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000caff1000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x0000000100000000-0x000000022f600000) (4854MB)
[ 0.000000] efi: mem52: type=0, attr=0x8000000000000000, range=[0x00000000cb800000-0x00000000cfa00000) (66MB)
[ 0.000000] efi: mem53: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem54: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem55: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem56: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Medion Akoya P7817/Akoya P7817, BIOS 509 01/23/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CB800000 mask FFF800000 uncachable
[ 0.000000] 7 base 22F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02cf4000, 0x02cf4fff] PGTABLE
[ 0.000000] BRK [0x02cf5000, 0x02cf5fff] PGTABLE
[ 0.000000] BRK [0x02cf6000, 0x02cf6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
[ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
[ 0.000000] BRK [0x02cf7000, 0x02cf7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
[ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x02cf8000, 0x02cf8fff] PGTABLE
[ 0.000000] BRK [0x02cf9000, 0x02cf9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xc9121fff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xc8ffffff] page 2M
[ 0.000000] [mem 0xc9000000-0xc9121fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca900000-0xca900fff]
[ 0.000000] [mem 0xca900000-0xca900fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca944000-0xcad49fff]
[ 0.000000] [mem 0xca944000-0xca9fffff] page 4k
[ 0.000000] [mem 0xcaa00000-0xcabfffff] page 2M
[ 0.000000] [mem 0xcac00000-0xcad49fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcaff1000-0xcaffffff]
[ 0.000000] [mem 0xcaff1000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x36162000-0x370a8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C987F000 000024 (v02 MEDION)
[ 0.000000] ACPI: XSDT 0x00000000C987F088 000084 (v01 MEDION MEDIONAG 00000001 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C98928D0 00010C (v05 MEDION MEDIONAG 00000001 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C987F1A8 013721 (v02 MEDION MEDIONAG 00000509 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000C9E35080 000040
[ 0.000000] ACPI: APIC 0x00000000C98929E0 000092 (v03 MEDION MEDIONAG 00000001 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9892A78 000044 (v01 MEDION MEDIONAG 00000001 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000C9892AC0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[ 0.000000] ACPI: MSDM 0x00000000C9892B88 000055 (v03 MEDION MEDIONAG 00000000 TEST 00000000)
[ 0.000000] ACPI: MCFG 0x00000000C9892BE0 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000C9892C20 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9892C58 000357 (v01 MEDION MEDIONAG 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9892FB0 0008C0 (v01 MEDION MEDIONAG 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C9893870 000B22 (v01 MEDION MEDIONAG 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x00000000C9894398 000038 (v00 MEDION MEDIONAG 00000000 MSFT 00000001)
[ 0.000000] ACPI: UEFI 0x00000000C98943D0 00005C (v01 MEDION MEDIONAG 00000000 ?? 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
[ 0.000000] NODE_DATA [mem 0x22f5f1000-0x22f5f5fff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880226c00000-ffff88022ddfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xc9121fff]
[ 0.000000] node 0: [mem 0xca900000-0xca900fff]
[ 0.000000] node 0: [mem 0xca944000-0xcad49fff]
[ 0.000000] node 0: [mem 0xcaff1000-0xcaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
[ 0.000000] On node 0 totalpages: 2066644
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11212 pages used for memmap
[ 0.000000] DMA32 zone: 820023 pages, LIFO batch:31
[ 0.000000] Normal zone: 16989 pages used for memmap
[ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcba00000-0xcf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9122000-0xc9879fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc987a000-0xc9894fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9895000-0xc9e37fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e38000-0xca857fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca858000-0xca8fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca901000-0xca943fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad4a000-0xcaff0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb800000-0xcf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022f200000 s80960 r8192 d21440 u262144
[ 0.000000] pcpu-alloc: s80960 r8192 d21440 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2038364
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=f6f331e3-4a4a-4a5a-b218-befd19c75047 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8033992K/8266576K available (5237K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 232584K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2195.079 MHz processor
[ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.15 BogoMIPS (lpj=8780316)
[ 0.000039] pid_max: default: 32768 minimum: 301
[ 0.000047] ACPI: Core revision 20140424
[ 0.014920] ACPI: All ACPI Tables successfully acquired
[ 0.015822] Security Framework initialized
[ 0.015831] AppArmor: AppArmor disabled by boot time parameter
[ 0.015832] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.016353] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.018550] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.019526] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019536] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019762] Initializing cgroup subsys memory
[ 0.019766] Initializing cgroup subsys devices
[ 0.019773] Initializing cgroup subsys freezer
[ 0.019776] Initializing cgroup subsys net_cls
[ 0.019780] Initializing cgroup subsys blkio
[ 0.019784] Initializing cgroup subsys perf_event
[ 0.019786] Initializing cgroup subsys net_prio
[ 0.019811] CPU: Physical Processor ID: 0
[ 0.019812] CPU: Processor Core ID: 0
[ 0.019817] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.020220] mce: CPU supports 9 MCE banks
[ 0.020234] CPU0: Thermal monitoring enabled (TM1)
[ 0.020242] process: using mwait in idle threads
[ 0.020246] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.020365] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.023616] ftrace: allocating 21697 entries in 85 pages
[ 0.033948] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073590] smpboot: CPU0: Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz (fam: 06, model: 3a, stepping: 09)
[ 0.073598] TSC deadline timer enabled
[ 0.073619] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.073640] ... version: 3
[ 0.073641] ... bit width: 48
[ 0.073642] ... generic registers: 4
[ 0.073643] ... value mask: 0000ffffffffffff
[ 0.073644] ... max period: 0000ffffffffffff
[ 0.073644] ... fixed-purpose events: 3
[ 0.073645] ... event mask: 000000070000000f
[ 0.075224] x86: Booting SMP configuration:
[ 0.075226] .... node #0, CPUs: #1
[ 0.088719] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088819] #2 #3 #4 #5 #6 #7
[ 0.170581] x86: Booted up 1 node, 8 CPUs
[ 0.170584] smpboot: Total of 8 processors activated (35121.26 BogoMIPS)
[ 0.177987] devtmpfs: initialized
[ 0.181188] PM: Registering ACPI NVS region [mem 0xc9895000-0xc9e37fff] (5910528 bytes)
[ 0.181313] PM: Registering ACPI NVS region [mem 0xca901000-0xca943fff] (274432 bytes)
[ 0.182227] pinctrl core: initialized pinctrl subsystem
[ 0.182306] NET: Registered protocol family 16
[ 0.182428] cpuidle: using governor ladder
[ 0.182432] cpuidle: using governor menu
[ 0.182473] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.182475] ACPI: bus type PCI registered
[ 0.182476] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.182569] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.182571] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.182656] PCI: Using configuration type 1 for base access
[ 0.194235] ACPI: Added _OSI(Module Device)
[ 0.194238] ACPI: Added _OSI(Processor Device)
[ 0.194239] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.194240] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.196194] ACPI : EC: EC description table is found, configuring boot EC
[ 0.198967] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.234170] ACPI: Dynamic OEM Table Load:
[ 0.234177] ACPI: SSDT 0xFFFF88022E839000 000859 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.246012] ACPI: Dynamic OEM Table Load:
[ 0.246018] ACPI: SSDT 0xFFFF880226047400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.257839] ACPI: Dynamic OEM Table Load:
[ 0.257844] ACPI: SSDT 0xFFFF8802262D0400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.271057] ACPI: Interpreter enabled
[ 0.271063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.271068] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.271084] ACPI: (supports S0 S3 S4 S5)
[ 0.271085] ACPI: Using IOAPIC for interrupt routing
[ 0.271111] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.351156] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.351162] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.351414] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.351564] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.352175] PCI host bridge to bus 0000:00
[ 0.352178] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.352180] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.352182] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.352183] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.352185] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.352187] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.352188] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.352190] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.352191] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.352193] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.352194] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.352196] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.352198] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
[ 0.352205] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.352299] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.352333] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.352414] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.352426] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.352433] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.352438] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.352547] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.352571] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.352644] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.352688] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.352734] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.352760] pci 0000:00:16.0: reg 0x10: [mem 0xf791a000-0xf791a00f 64bit]
[ 0.352838] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.352934] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.352957] pci 0000:00:1a.0: reg 0x10: [mem 0xf7918000-0xf79183ff]
[ 0.353049] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.353094] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.353141] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.353157] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
[ 0.353224] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.353306] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.353391] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.353439] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.353482] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.353566] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.353613] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.353662] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.353746] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.353794] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.353847] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.353869] pci 0000:00:1d.0: reg 0x10: [mem 0xf7917000-0xf79173ff]
[ 0.353963] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.354008] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.354054] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.354236] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.354256] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.354265] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.354273] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.354282] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.354290] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.354299] pci 0000:00:1f.2: reg 0x24: [mem 0xf7916000-0xf79167ff]
[ 0.354346] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.354426] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.354443] pci 0000:00:1f.3: reg 0x10: [mem 0xf7915000-0xf79150ff 64bit]
[ 0.354464] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.354603] pci 0000:01:00.0: [10de:0fe1] type 00 class 0x030200
[ 0.354616] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.354627] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.354638] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.354644] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.354651] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.365665] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.365670] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.365675] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.365680] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.365761] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.365903] pci 0000:03:00.0: [8086:0887] type 00 class 0x028000
[ 0.365950] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf7801fff 64bit]
[ 0.366166] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.366214] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.377726] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.377733] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.377824] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.377844] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.377872] pci 0000:04:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.377890] pci 0000:04:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.378001] pci 0000:04:00.0: supports D1 D2
[ 0.378002] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.389659] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.389665] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.389693] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.389743] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.401795] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.401848] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.401898] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.401947] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.401996] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.402045] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.402095] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.402143] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.402269] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.402375] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.402471] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.402473] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.402475] vgaarb: loaded
[ 0.402476] vgaarb: bridge control possible 0000:00:02.0
[ 0.402583] PCI: Using ACPI for IRQ routing
[ 0.404115] PCI: pci_cache_line_size set to 64 bytes
[ 0.404169] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.404171] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.404172] e820: reserve RAM buffer [mem 0xc9122000-0xcbffffff]
[ 0.404174] e820: reserve RAM buffer [mem 0xca901000-0xcbffffff]
[ 0.404176] e820: reserve RAM buffer [mem 0xcad4a000-0xcbffffff]
[ 0.404177] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.404179] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
[ 0.404313] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.404318] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.406345] Switched to clocksource hpet
[ 0.411109] pnp: PnP ACPI init
[ 0.411122] ACPI: bus type PNP registered
[ 0.411234] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.411236] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.411238] system 00:00: [io 0xffff] has been reserved
[ 0.411240] system 00:00: [io 0xffff] has been reserved
[ 0.411242] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.411244] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.411245] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.411247] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.411250] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411281] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.411334] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.411336] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.411388] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.411391] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411469] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.411472] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 0.411473] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.411475] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411545] system 00:05: [io 0x025d] has been reserved
[ 0.411548] system 00:05: [io 0x025c] has been reserved
[ 0.411550] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.411552] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.411554] system 00:05: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.411556] system 00:05: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.411557] system 00:05: [mem 0xfec20000-0xfec27fff] has been reserved
[ 0.411559] system 00:05: [mem 0xfec28000-0xfec2ffff] has been reserved
[ 0.411561] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.411563] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411623] pnp 00:06: Plug and Play ACPI device, IDs SYN1d1f SYN1d00 SYN0002 PNP0f13 (active)
[ 0.411668] pnp 00:07: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 0.411706] system 00:08: [io 0x0240-0x0259] has been reserved
[ 0.411708] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411911] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.411914] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.411915] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.411917] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.411919] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.411921] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.411923] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.411925] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.411928] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.411930] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.411932] system 00:09: [mem 0xcfa00000-0xcfa00fff] has been reserved
[ 0.411934] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.418565] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.418567] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.418569] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.418588] pnp: PnP ACPI: found 11 devices
[ 0.418589] ACPI: bus type PNP unregistered
[ 0.425085] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.425088] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.425091] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.425094] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.425097] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.425109] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.425115] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.425123] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.425126] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.425133] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.425140] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.425142] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.425143] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.425145] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.425147] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.425148] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.425150] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.425151] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.425153] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.425155] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.425156] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.425158] pci_bus 0000:00: resource 15 [mem 0xcfa00000-0xfeafffff]
[ 0.425159] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.425161] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.425163] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.425165] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.425166] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.425168] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.425255] NET: Registered protocol family 2
[ 0.425541] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.425697] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.425812] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.425828] TCP: reno registered
[ 0.425838] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.425867] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.425967] NET: Registered protocol family 1
[ 0.425984] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.466407] PCI: CLS 64 bytes, default 64
[ 0.466457] Unpacking initramfs...
[ 0.760808] Freeing initrd memory: 15644K (ffff880036162000 - ffff8800370a9000)
[ 0.760816] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.760818] software IO TLB [mem 0xc3bca000-0xc7bca000] (64MB) mapped at [ffff8800c3bca000-ffff8800c7bc9fff]
[ 0.761219] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.761278] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 0.761283] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 0.761291] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 0.761300] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 0.761309] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[ 0.761317] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[ 0.761326] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[ 0.761333] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[ 0.761382] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 0.761457] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x7e9000 bytes, mapped to 0xffffc90004e80000
[ 0.761460] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[ 0.766454] Console: switching to colour frame buffer device 240x67
[ 0.771345] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.771644] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.771690] audit: initializing netlink subsys (disabled)
[ 0.771706] audit: type=2000 audit(1477530813.760:1): initialized
[ 0.772177] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.772199] zbud: loaded
[ 0.772452] VFS: Disk quotas dquot_6.5.2
[ 0.772476] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.772534] msgmni has been set to 15764
[ 0.772859] alg: No test for stdrng (krng)
[ 0.772893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.772956] io scheduler noop registered
[ 0.772959] io scheduler deadline registered
[ 0.773009] io scheduler cfq registered (default)
[ 0.773185] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.773585] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.773601] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.773624] intel_idle: MWAIT substates: 0x21120
[ 0.773625] intel_idle: v0.4 model 0x3A
[ 0.773626] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.773999] GHES: HEST is not enabled!
[ 0.774071] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.774536] Linux agpgart interface v0.103
[ 0.774672] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.776712] i8042: Detected active multiplexing controller, rev 1.1
[ 0.778778] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.778783] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.778791] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.778792] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.778794] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.778969] mousedev: PS/2 mouse device common for all mice
[ 0.779003] rtc_cmos 00:01: RTC can wake from S4
[ 0.779140] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.779169] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.779183] Intel P-state driver initializing.
[ 0.779198] Intel pstate controlling: cpu 0
[ 0.779217] Intel pstate controlling: cpu 1
[ 0.779237] Intel pstate controlling: cpu 2
[ 0.779256] Intel pstate controlling: cpu 3
[ 0.779275] Intel pstate controlling: cpu 4
[ 0.779295] Intel pstate controlling: cpu 5
[ 0.779317] Intel pstate controlling: cpu 6
[ 0.779353] Intel pstate controlling: cpu 7
[ 0.779404] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.780160] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel at amd.com>
[ 0.780162] AMD IOMMUv2 functionality not available on this system
[ 0.780318] TCP: cubic registered
[ 0.780613] NET: Registered protocol family 10
[ 0.781117] mip6: Mobile IPv6
[ 0.781125] NET: Registered protocol family 17
[ 0.781137] mpls_gso: MPLS GSO support
[ 0.781805] registered taskstats version 1
[ 0.782784] rtc_cmos 00:01: setting system clock to 2016-10-27 01:13:34 UTC (1477530814)
[ 0.782948] PM: Hibernation image not present or could not be loaded.
[ 0.784254] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 0.784256] Write protecting the kernel read-only data: 8192k
[ 0.784917] Freeing unused kernel memory: 896K (ffff880002720000 - ffff880002800000)
[ 0.785789] Freeing unused kernel memory: 212K (ffff8800029cb000 - ffff880002a00000)
[ 0.796273] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.799066] systemd-udevd[92]: starting version 215
[ 0.799344] random: systemd-udevd urandom read with 5 bits of entropy available
[ 0.809035] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.809039] ACPI: Thermal Zone [THRM] (48 C)
[ 0.809421] ACPI: bus type USB registered
[ 0.809467] usbcore: registered new interface driver usbfs
[ 0.809482] usbcore: registered new interface driver hub
[ 0.809543] usbcore: registered new device driver usb
[ 0.809580] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.809589] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.809601] r8169 0000:04:00.0: enabling device (0000 -> 0003)
[ 0.809856] r8169 0000:04:00.0: irq 41 for MSI/MSI-X
[ 0.810084] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000014000, 70:54:d2:c2:82:8d, XID 0c900800 IRQ 41
[ 0.810087] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.810287] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.810423] SCSI subsystem initialized
[ 0.810484] ehci-pci: EHCI PCI platform driver
[ 0.810535] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.810546] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.811633] libata version 3.00 loaded.
[ 0.811688] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.811710] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.811780] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.811782] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.811783] usb usb1: Product: xHCI Host Controller
[ 0.811784] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.811785] usb usb1: SerialNumber: 0000:00:14.0
[ 0.811925] hub 1-0:1.0: USB hub found
[ 0.811943] hub 1-0:1.0: 4 ports detected
[ 0.812372] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.812377] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.812420] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.812422] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.812424] usb usb2: Product: xHCI Host Controller
[ 0.812426] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.812428] usb usb2: SerialNumber: 0000:00:14.0
[ 0.812533] hub 2-0:1.0: USB hub found
[ 0.812543] hub 2-0:1.0: 4 ports detected
[ 0.812983] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.812992] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.813011] ehci-pci 0000:00:1a.0: debug port 2
[ 0.816932] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.816947] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7918000
[ 0.825921] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.825951] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.825952] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.825954] usb usb3: Product: EHCI Host Controller
[ 0.825955] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.825956] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.826052] hub 3-0:1.0: USB hub found
[ 0.826056] hub 3-0:1.0: 2 ports detected
[ 0.826215] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.826218] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.826230] ehci-pci 0000:00:1d.0: debug port 2
[ 0.830129] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.830141] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7917000
[ 0.841885] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.841919] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.841921] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.841922] usb usb4: Product: EHCI Host Controller
[ 0.841923] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.841924] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.842080] hub 4-0:1.0: USB hub found
[ 0.842086] hub 4-0:1.0: 2 ports detected
[ 0.842187] ahci 0000:00:1f.2: version 3.0
[ 0.842329] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.857886] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl RAID mode
[ 0.857888] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.874420] scsi0 : ahci
[ 0.921709] scsi1 : ahci
[ 0.921981] scsi2 : ahci
[ 0.922189] scsi3 : ahci
[ 0.922318] scsi4 : ahci
[ 0.922417] scsi5 : ahci
[ 0.922452] ata1: SATA max UDMA/133 abar m2048 at 0xf7916000 port 0xf7916100 irq 43
[ 0.922453] ata2: DUMMY
[ 0.922455] ata3: SATA max UDMA/133 abar m2048 at 0xf7916000 port 0xf7916200 irq 43
[ 0.922455] ata4: DUMMY
[ 0.922458] ata5: SATA max UDMA/133 abar m2048 at 0xf7916000 port 0xf7916300 irq 43
[ 0.922458] ata6: DUMMY
[ 1.121591] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 1.241493] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.241521] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.241547] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.242361] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20140424/dsopcode-236)
[ 1.242371] ACPI Error: Method parse/execution failed [\GTFB] (Node ffff88022e888900), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[ 1.242380] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88022e8887c0), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[ 1.242390] ata1.00: _GTF evaluation failed (AE 0x300a)
[ 1.242556] ata1.00: ATA-9: SAMSUNG MZMPC032HBCD-00000, CXM1201Q, max UDMA/133
[ 1.242562] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.243230] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20140424/dsopcode-236)
[ 1.243242] ACPI Error: Method parse/execution failed [\GTFB] (Node ffff88022e888900), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[ 1.243255] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88022e8887c0), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[ 1.243270] ata1.00: _GTF evaluation failed (AE 0x300a)
[ 1.243293] ata3.00: ATAPI: MATSHITABD-CMB UJ160, 1.00, max UDMA/133
[ 1.243442] ata1.00: configured for UDMA/133
[ 1.243726] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMPC032 201Q PQ: 0 ANSI: 5
[ 1.244624] ata3.00: configured for UDMA/133
[ 1.246093] scsi 2:0:0:0: CD-ROM MATSHITA BD-CMB UJ160 1.00 PQ: 0 ANSI: 5
[ 1.248185] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20140424/dsopcode-236)
[ 1.248195] ACPI Error: Method parse/execution failed [\GTFB] (Node ffff88022e888900), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[ 1.248204] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88022e888658), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[ 1.248214] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 1.248334] ata5.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
[ 1.248340] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.255020] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20140424/dsopcode-236)
[ 1.255030] ACPI Error: Method parse/execution failed [\GTFB] (Node ffff88022e888900), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[ 1.255039] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88022e888658), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[ 1.255049] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 1.255181] ata5.00: configured for UDMA/100
[ 1.255331] scsi 4:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[ 1.261149] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 1.261225] sd 0:0:0:0: [sda] Write Protect is off
[ 1.261229] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.261248] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.262895] sda: sda1 sda2 sda3
[ 1.263347] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.267926] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.267929] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.268124] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.268353] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.268357] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 1.268423] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.268427] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.268457] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.269009] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.269127] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.269185] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.317584] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 1.317589] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.317592] usb 1-4: Product: USB2.0-CRW
[ 1.317594] usb 1-4: Manufacturer: Generic
[ 1.317596] usb 1-4: SerialNumber: 20090516388200000
[ 1.325260] usbcore: registered new interface driver usb-storage
[ 1.325731] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 1.327854] sdb: sdb1 sdb2 sdb5
[ 1.328357] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.340817] scsi6 : usb-storage 1-4:1.0
[ 1.340919] usbcore: registered new interface driver ums-realtek
[ 1.433282] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.564828] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 1.565638] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.565644] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.566067] hub 3-1:1.0: USB hub found
[ 1.566182] hub 3-1:1.0: 6 ports detected
[ 1.617012] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 0, fw id: 582762
[ 1.650853] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
[ 1.677009] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.756896] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[ 1.803584] device-mapper: uevent: version 1.0.3
[ 1.803711] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel at redhat.com
[ 1.809156] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.809162] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.809461] hub 4-1:1.0: USB hub found
[ 1.809520] hub 4-1:1.0: 8 ports detected
[ 1.810371] PM: Starting manual resume from disk
[ 1.810378] PM: Hibernation image partition 8:3 present
[ 1.810380] PM: Looking for hibernation image.
[ 1.811003] PM: Image not found (code -22)
[ 1.811008] PM: Hibernation image not present or could not be loaded.
[ 1.884794] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.063920] usb 3-1.1: New USB device found, idVendor=0c45, idProduct=6457
[ 2.063926] usb 3-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.063929] usb 3-1.1: Product: USB 2.0 Camera
[ 2.063932] usb 3-1.1: Manufacturer: 0420-00HS000D195VP
[ 2.136522] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.233088] usb 3-1.4: New USB device found, idVendor=8087, idProduct=07da
[ 2.233093] usb 3-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.339169] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2.339659] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 2.648361] usb 1-4: USB disconnect, device number 2
[ 2.656198] sd 6:0:0:0: [sdc] READ CAPACITY failed
[ 2.656204] sd 6:0:0:0: [sdc]
[ 2.656207] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2.656210] sd 6:0:0:0: [sdc] Sense not available.
[ 2.656290] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.656297] sd 6:0:0:0: [sdc] Mode Sense: d7 86 77 07
[ 2.656381] sd 6:0:0:0: [sdc] Asking for cache data failed
[ 2.656433] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 2.656935] sd 6:0:0:0: [sdc] READ CAPACITY failed
[ 2.656943] sd 6:0:0:0: [sdc]
[ 2.656945] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2.656947] sd 6:0:0:0: [sdc] Sense not available.
[ 2.657075] sd 6:0:0:0: [sdc] Write Protect is on
[ 2.657081] sd 6:0:0:0: [sdc] Mode Sense: ff ff ff ff
[ 2.657163] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 2.756121] Switched to clocksource tsc
[ 2.895649] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 3.207700] random: nonblocking pool is initialized
[ 3.333973] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 3.333979] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.333982] usb 1-4: Product: USB2.0-CRW
[ 3.333985] usb 1-4: Manufacturer: Generic
[ 3.333987] usb 1-4: SerialNumber: 20090516388200000
[ 3.339784] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 3.355312] scsi7 : usb-storage 1-4:1.0
[ 4.356852] scsi 7:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 4.357344] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 4.605882] usb 1-4: USB disconnect, device number 3
[ 4.614012] sd 7:0:0:0: [sdc] READ CAPACITY failed
[ 4.614033] sd 7:0:0:0: [sdc]
[ 4.614036] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 4.614038] sd 7:0:0:0: [sdc] Sense not available.
[ 4.614113] sd 7:0:0:0: [sdc] Write Protect is on
[ 4.614120] sd 7:0:0:0: [sdc] Mode Sense: 80 81 e8 03
[ 4.614209] sd 7:0:0:0: [sdc] No Caching mode page found
[ 4.614257] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4.614707] sd 7:0:0:0: [sdc] READ CAPACITY failed
[ 4.614712] sd 7:0:0:0: [sdc]
[ 4.614714] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 4.614715] sd 7:0:0:0: [sdc] Sense not available.
[ 4.614825] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 4.853496] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[ 5.291727] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 5.291733] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.291736] usb 1-4: Product: USB2.0-CRW
[ 5.291739] usb 1-4: Manufacturer: Generic
[ 5.291741] usb 1-4: SerialNumber: 20090516388200000
[ 5.297711] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 5.313236] scsi8 : usb-storage 1-4:1.0
[ 6.314662] scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.315087] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 6.619669] usb 1-4: USB disconnect, device number 4
[ 6.627805] sd 8:0:0:0: [sdc] READ CAPACITY failed
[ 6.627810] sd 8:0:0:0: [sdc]
[ 6.627813] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 6.627815] sd 8:0:0:0: [sdc] Sense not available.
[ 6.627888] sd 8:0:0:0: [sdc] Write Protect is on
[ 6.627894] sd 8:0:0:0: [sdc] Mode Sense: 00 00 80 00
[ 6.627963] sd 8:0:0:0: [sdc] No Caching mode page found
[ 6.628009] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 6.628483] sd 8:0:0:0: [sdc] READ CAPACITY failed
[ 6.628489] sd 8:0:0:0: [sdc]
[ 6.628491] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 6.628494] sd 8:0:0:0: [sdc] Sense not available.
[ 6.628671] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 6.867283] usb 1-4: new high-speed USB device number 5 using xhci_hcd
[ 7.305429] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 7.305435] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.305438] usb 1-4: Product: USB2.0-CRW
[ 7.305441] usb 1-4: Manufacturer: Generic
[ 7.305443] usb 1-4: SerialNumber: 20090516388200000
[ 7.311271] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 7.326857] scsi9 : usb-storage 1-4:1.0
[ 7.347747] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.328514] scsi 9:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 8.328953] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 8.333723] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 8.334009] systemd[1]: Detected architecture 'x86-64'.
[ 8.633772] usb 1-4: USB disconnect, device number 5
[ 8.641598] sd 9:0:0:0: [sdc] READ CAPACITY failed
[ 8.641603] sd 9:0:0:0: [sdc]
[ 8.641606] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 8.641608] sd 9:0:0:0: [sdc] Sense not available.
[ 8.641695] sd 9:0:0:0: [sdc] Write Protect is off
[ 8.641702] sd 9:0:0:0: [sdc] Mode Sense: 2f 72 6f 6f
[ 8.641777] sd 9:0:0:0: [sdc] Asking for cache data failed
[ 8.641829] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 8.642260] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 8.707233] systemd[1]: Inserted module 'autofs4'
[ 8.717792] systemd[1]: Set hostname to <rcl-personal-lt-1>.
[ 8.881100] usb 1-4: new high-speed USB device number 6 using xhci_hcd
[ 9.319269] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 9.319274] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.319277] usb 1-4: Product: USB2.0-CRW
[ 9.319280] usb 1-4: Manufacturer: Generic
[ 9.319282] usb 1-4: SerialNumber: 20090516388200000
[ 9.325106] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 9.340639] scsi10 : usb-storage 1-4:1.0
[ 10.342320] scsi 10:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 10.342788] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 10.591305] usb 1-4: USB disconnect, device number 6
[ 10.599429] sd 10:0:0:0: [sdc] READ CAPACITY failed
[ 10.599435] sd 10:0:0:0: [sdc]
[ 10.599438] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 10.599440] sd 10:0:0:0: [sdc] Sense not available.
[ 10.599512] sd 10:0:0:0: [sdc] Write Protect is off
[ 10.599519] sd 10:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 10.599595] sd 10:0:0:0: [sdc] Asking for cache data failed
[ 10.599647] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 10.600067] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 10.838936] usb 1-4: new high-speed USB device number 7 using xhci_hcd
[ 11.277186] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 11.277194] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.277198] usb 1-4: Product: USB2.0-CRW
[ 11.277202] usb 1-4: Manufacturer: Generic
[ 11.277206] usb 1-4: SerialNumber: 20090516388200000
[ 11.282959] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 11.298466] scsi11 : usb-storage 1-4:1.0
[ 11.654611] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 11.654718] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.654737] systemd[1]: Starting Remote File Systems (Pre).
[ 11.654773] systemd[1]: Reached target Remote File Systems (Pre).
[ 11.654805] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 11.654914] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.654936] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 11.654976] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.654992] systemd[1]: Expecting device dev-disk-by\x2duuid-6cb41f78\x2da8df\x2d4780\x2da68c\x2dd4d75f413496.device...
[ 11.655007] systemd[1]: Expecting device dev-disk-by\x2duuid-B8F5\x2d4D24.device...
[ 11.655019] systemd[1]: Expecting device dev-disk-by\x2duuid-e610d2f8\x2db58d\x2d416d\x2d8093\x2d250ebd971bfc.device...
[ 11.655031] systemd[1]: Expecting device dev-disk-by\x2duuid-01D0E553E5B8E390.device...
[ 11.655044] systemd[1]: Starting Root Slice.
[ 11.655072] systemd[1]: Created slice Root Slice.
[ 11.655086] systemd[1]: Starting User and Session Slice.
[ 11.655134] systemd[1]: Created slice User and Session Slice.
[ 11.655147] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 11.655191] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 11.655205] systemd[1]: Starting Delayed Shutdown Socket.
[ 11.655236] systemd[1]: Listening on Delayed Shutdown Socket.
[ 11.655249] systemd[1]: Starting Journal Socket (/dev/log).
[ 11.655284] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.655298] systemd[1]: Starting LVM2 metadata daemon socket.
[ 11.655327] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 11.655340] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 11.655372] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 11.655388] systemd[1]: Starting udev Control Socket.
[ 11.655418] systemd[1]: Listening on udev Control Socket.
[ 11.655433] systemd[1]: Starting udev Kernel Socket.
[ 11.655458] systemd[1]: Listening on udev Kernel Socket.
[ 11.655475] systemd[1]: Starting Journal Socket.
[ 11.655510] systemd[1]: Listening on Journal Socket.
[ 11.655537] systemd[1]: Starting System Slice.
[ 11.655583] systemd[1]: Created slice System Slice.
[ 11.655604] systemd[1]: Started File System Check on Root Device.
[ 11.655616] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 11.655674] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 11.655690] systemd[1]: Starting system-getty.slice.
[ 11.655740] systemd[1]: Created slice system-getty.slice.
[ 11.655771] systemd[1]: Starting Increase datagram queue length...
[ 11.656352] systemd[1]: Mounting Debug File System...
[ 11.780761] systemd[1]: Starting Load Kernel Modules...
[ 11.781321] systemd[1]: Mounting Huge Pages File System...
[ 11.781880] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 11.782454] systemd[1]: Starting udev Coldplug all Devices...
[ 11.782962] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.818474] systemd[1]: Started Set Up Additional Binary Formats.
[ 11.818515] systemd[1]: Starting Slices.
[ 11.818537] systemd[1]: Reached target Slices.
[ 11.995306] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 11.995800] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 12.023537] systemd[1]: Started udev Coldplug all Devices.
[ 12.023710] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 12.300152] scsi 11:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 12.300647] sd 11:0:0:0: Attached scsi generic sg3 type 0
[ 12.537664] systemd[1]: Started Increase datagram queue length.
[ 12.537817] systemd[1]: Starting Syslog Socket.
[ 12.537870] systemd[1]: Listening on Syslog Socket.
[ 12.537893] systemd[1]: Starting Journal Service...
[ 12.538517] systemd[1]: Started Journal Service.
[ 12.605401] usb 1-4: USB disconnect, device number 7
[ 12.613192] sd 11:0:0:0: [sdc] READ CAPACITY failed
[ 12.613198] sd 11:0:0:0: [sdc]
[ 12.613201] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 12.613203] sd 11:0:0:0: [sdc] Sense not available.
[ 12.613276] sd 11:0:0:0: [sdc] Write Protect is off
[ 12.613298] sd 11:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 12.613386] sd 11:0:0:0: [sdc] Asking for cache data failed
[ 12.613436] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[ 12.613814] sd 11:0:0:0: [sdc] Attached SCSI removable disk
[ 12.852779] usb 1-4: new high-speed USB device number 8 using xhci_hcd
[ 12.957882] lp: driver loaded but no devices found
[ 13.037704] ppdev: user-space parallel port driver
[ 13.129628] fuse init (API version 7.23)
[ 13.157025] systemd-udevd[267]: starting version 215
[ 13.290901] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 13.290906] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.290910] usb 1-4: Product: USB2.0-CRW
[ 13.290912] usb 1-4: Manufacturer: Generic
[ 13.290914] usb 1-4: SerialNumber: 20090516388200000
[ 13.296752] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 13.312327] scsi12 : usb-storage 1-4:1.0
[ 14.313948] scsi 12:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 14.314464] sd 12:0:0:0: Attached scsi generic sg3 type 0
[ 14.619210] usb 1-4: USB disconnect, device number 8
[ 14.627079] sd 12:0:0:0: [sdc] READ CAPACITY failed
[ 14.627084] sd 12:0:0:0: [sdc]
[ 14.627087] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 14.627090] sd 12:0:0:0: [sdc] Sense not available.
[ 14.627162] sd 12:0:0:0: [sdc] Write Protect is off
[ 14.627169] sd 12:0:0:0: [sdc] Mode Sense: 61 00 00 00
[ 14.627255] sd 12:0:0:0: [sdc] No Caching mode page found
[ 14.627307] sd 12:0:0:0: [sdc] Assuming drive cache: write through
[ 14.627672] sd 12:0:0:0: [sdc] Attached SCSI removable disk
[ 14.866525] usb 1-4: new high-speed USB device number 9 using xhci_hcd
[ 15.304694] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 15.304700] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 15.304704] usb 1-4: Product: USB2.0-CRW
[ 15.304707] usb 1-4: Manufacturer: Generic
[ 15.304709] usb 1-4: SerialNumber: 20090516388200000
[ 15.310413] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 15.325988] scsi13 : usb-storage 1-4:1.0
[ 15.497992] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 15.774955] EFI Variables Facility v0.08 2004-May-17
[ 15.790767] wmi: Mapper loaded
[ 15.954808] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
[ 15.968365] pstore: Registered efi as persistent store backend
[ 15.981368] ACPI: AC Adapter [AC0] (on-line)
[ 15.989343] ACPI: Lid Switch [LID]
[ 15.989391] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input11
[ 15.989395] ACPI: Sleep Button [SLPB]
[ 15.989430] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[ 15.989432] ACPI: Power Button [PWRF]
[ 16.037470] ACPI: Battery Slot [BAT0] (battery present)
[ 16.327513] scsi 13:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 16.327722] sd 13:0:0:0: Attached scsi generic sg3 type 0
[ 16.378583] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.515992] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20140424/utaddress-254)
[ 16.515997] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20140424/utaddress-254)
[ 16.516000] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
[ 16.516003] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB_.PCI0.VGA_.TCOI) (20140424/utaddress-254)
[ 16.516005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.516008] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20140424/utaddress-254)
[ 16.516011] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[ 16.516013] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.516013] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20140424/utaddress-254)
[ 16.516016] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[ 16.516018] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.516018] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20140424/utaddress-254)
[ 16.516020] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[ 16.516023] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.516023] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 16.521931] usb 1-4: USB disconnect, device number 9
[ 16.528687] sd 13:0:0:0: [sdc] READ CAPACITY failed
[ 16.528689] sd 13:0:0:0: [sdc]
[ 16.528691] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 16.528692] sd 13:0:0:0: [sdc] Sense not available.
[ 16.528702] sd 13:0:0:0: [sdc] Write Protect is off
[ 16.528705] sd 13:0:0:0: [sdc] Mode Sense: 64 5f 68 64
[ 16.528716] sd 13:0:0:0: [sdc] No Caching mode page found
[ 16.528739] sd 13:0:0:0: [sdc] Assuming drive cache: write through
[ 16.528883] sd 13:0:0:0: [sdc] READ CAPACITY failed
[ 16.528884] sd 13:0:0:0: [sdc]
[ 16.528885] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 16.528886] sd 13:0:0:0: [sdc] Sense not available.
[ 16.528922] sd 13:0:0:0: [sdc] Attached SCSI removable disk
[ 16.616247] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 16.616478] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 16.734897] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 16.793813] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
[ 16.793822] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.832303] usb 1-4: new high-speed USB device number 10 using xhci_hcd
[ 17.003551] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 17.003555] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.003556] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 17.003557] sound hdaudioC0D0: mono: mono_out=0x0
[ 17.003558] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 17.003559] sound hdaudioC0D0: inputs:
[ 17.003561] sound hdaudioC0D0: Internal Mic=0x19
[ 17.003562] sound hdaudioC0D0: Mic=0x18
[ 17.034239] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 17.173877] [drm] Initialized drm 1.1.0 20060810
[ 17.223412] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 17.223507] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 17.223597] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 17.229534] cfg80211: Calling CRDA to update world regulatory domain
[ 17.270473] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 17.270478] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 17.270481] usb 1-4: Product: USB2.0-CRW
[ 17.270484] usb 1-4: Manufacturer: Generic
[ 17.270486] usb 1-4: SerialNumber: 20090516388200000
[ 17.276020] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 17.291270] scsi14 : usb-storage 1-4:1.0
[ 17.354481] iTCO_vendor_support: vendor-support=0
[ 17.481238] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 17.481240] Copyright(c) 2003- 2014 Intel Corporation
[ 17.481278] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
[ 17.481338] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 17.481398] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
[ 17.525397] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-2030-6.ucode
[ 17.525627] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 17.596740] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 17.596791] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 17.596962] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.923515] [drm] Memory usable by graphics device = 2048M
[ 17.923522] checking generic (d0000000 7e9000) vs hw (d0000000 10000000)
[ 17.923525] fb: switching to inteldrmfb from simple
[ 17.923572] Console: switching to colour dummy device 80x25
[ 17.923725] [drm] Replacing VGA console driver
[ 17.947238] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 17.947263] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 17.947265] [drm] Driver supports precise vblank timestamp query.
[ 17.947453] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.977672] MXM: GUID detected in BIOS
[ 17.977767] ACPI Warning: \_SB_.PCI0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 17.977867] ACPI Warning: \_SB_.PCI0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 17.977990] i915 0000:00:02.0: optimus capabilities: disabled, status
[ 17.978026] ACPI Warning: \_SB_.PCI0.RP00.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 17.978111] ACPI Warning: \_SB_.PCI0.RP00.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 17.978211] pci 0000:01:00.0: optimus capabilities: disabled, status
[ 17.978215] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP00.VGA_ handle
[ 17.978267] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[ 17.990396] fbcon: inteldrmfb (fb0) is primary device
[ 18.071454] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 18.071456] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 18.071459] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 18.071462] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 18.071535] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 18.092202] AVX version of gcm_enc/dec engaged.
[ 18.095620] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 18.173801] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 18.242812] alg: No test for crc32 (crc32-pclmul)
[ 18.289693] scsi 14:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 18.290075] sd 14:0:0:0: Attached scsi generic sg3 type 0
[ 18.542922] usb 1-4: USB disconnect, device number 10
[ 18.550770] sd 14:0:0:0: [sdc] READ CAPACITY failed
[ 18.550773] sd 14:0:0:0: [sdc]
[ 18.550774] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 18.550776] sd 14:0:0:0: [sdc] Sense not available.
[ 18.550861] sd 14:0:0:0: [sdc] Write Protect is on
[ 18.550865] sd 14:0:0:0: [sdc] Mode Sense: 0f fe ff ff
[ 18.550936] sd 14:0:0:0: [sdc] Asking for cache data failed
[ 18.550949] sd 14:0:0:0: [sdc] Assuming drive cache: write through
[ 18.551311] sd 14:0:0:0: [sdc] Attached SCSI removable disk
[ 18.651015] Console: switching to colour frame buffer device 240x67
[ 18.659320] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 18.659323] i915 0000:00:02.0: registered panic notifier
[ 18.690577] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 18.690726] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input17
[ 18.691058] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 18.710864] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input18
[ 18.711064] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 18.711547] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7210a2
[ 18.711558] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[ 18.711563] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 18.711649] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 18.711660] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 18.711663] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 18.711723] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 18.711727] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 18.790265] usb 1-4: new high-speed USB device number 11 using xhci_hcd
[ 18.882256] cfg80211: World regulatory domain updated:
[ 18.882265] cfg80211: DFS Master region: unset
[ 18.882267] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 18.882272] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.882275] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.882278] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.882281] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 18.882285] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 18.882288] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 18.882290] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.882293] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 19.228598] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 19.228606] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 19.228609] usb 1-4: Product: USB2.0-CRW
[ 19.228612] usb 1-4: Manufacturer: Generic
[ 19.228615] usb 1-4: SerialNumber: 20090516388200000
[ 19.234417] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 19.250008] scsi15 : usb-storage 1-4:1.0
[ 19.393766] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 19.393773] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 19.394018] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 19.394023] nouveau [ VBIOS][0000:01:00.0] version 80.07.70.00.0f
[ 19.394538] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 19.394548] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 19.523004] Adding 19629052k swap on /dev/sda3. Priority:-1 extents:1 across:19629052k SSFS
[ 19.562194] Bluetooth: Core ver 2.19
[ 19.562205] NET: Registered protocol family 31
[ 19.562206] Bluetooth: HCI device and connection manager initialized
[ 19.562211] Bluetooth: HCI socket layer initialized
[ 19.562213] Bluetooth: L2CAP socket layer initialized
[ 19.562220] Bluetooth: SCO socket layer initialized
[ 19.636012] nouveau 0000:01:00.0: irq 48 for MSI/MSI-X
[ 19.636024] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 19.636071] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 19.636073] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
[ 19.636074] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 19.637426] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 19.666846] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 19.666855] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 19.666865] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 19.666898] nouveau [ CLK][0000:01:00.0] 07: core 270-405 MHz memory 810 MHz
[ 19.666928] nouveau [ CLK][0000:01:00.0] 0f: core 270-724 MHz memory 1800 MHz
[ 19.667063] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 648 MHz
[ 19.694805] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
[ 19.694840] vga_switcheroo: enabled
[ 19.694907] [TTM] Zone kernel: Available graphics memory: 4036808 kiB
[ 19.694908] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 19.694908] [TTM] Initializing pool allocator
[ 19.694912] [TTM] Initializing DMA pool allocator
[ 19.694921] nouveau [ DRM] VRAM: 2048 MiB
[ 19.694921] nouveau [ DRM] GART: 1048576 MiB
[ 19.694924] nouveau [ DRM] TMDS table version 2.0
[ 19.694926] nouveau [ DRM] DCB version 4.0
[ 19.700126] nouveau [ DRM] MM: using COPY for buffer copies
[ 19.700135] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 1
[ 19.714737] media: Linux media interface: v0.10
[ 19.733506] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 19.852068] usbcore: registered new interface driver btusb
[ 19.880440] Linux video capture interface: v2.00
[ 19.993207] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6457)
[ 20.012859] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input19
[ 20.013067] usbcore: registered new interface driver uvcvideo
[ 20.013085] USB Video Class driver (1.1.1)
[ 20.251574] scsi 15:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 20.252139] sd 15:0:0:0: Attached scsi generic sg3 type 0
[ 20.556702] usb 1-4: USB disconnect, device number 11
[ 20.564505] sd 15:0:0:0: [sdc] READ CAPACITY failed
[ 20.564513] sd 15:0:0:0: [sdc]
[ 20.564516] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 20.564519] sd 15:0:0:0: [sdc] Sense not available.
[ 20.564599] sd 15:0:0:0: [sdc] Write Protect is off
[ 20.564606] sd 15:0:0:0: [sdc] Mode Sense: 2e 2e 2f 2e
[ 20.564666] sd 15:0:0:0: [sdc] No Caching mode page found
[ 20.564721] sd 15:0:0:0: [sdc] Assuming drive cache: write through
[ 20.565161] sd 15:0:0:0: [sdc] Attached SCSI removable disk
[ 20.633572] intel_rapl: Found RAPL domain package
[ 20.633584] intel_rapl: Found RAPL domain core
[ 20.633593] intel_rapl: Found RAPL domain uncore
[ 20.633614] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 20.804038] usb 1-4: new high-speed USB device number 12 using xhci_hcd
[ 21.000333] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 21.000339] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 21.000342] usb 1-4: Product: USB2.0-CRW
[ 21.000344] usb 1-4: Manufacturer: Generic
[ 21.000347] usb 1-4: SerialNumber: 20090516388200000
[ 21.006350] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 21.022153] scsi16 : usb-storage 1-4:1.0
[ 21.584698] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 21.717089] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 22.021667] scsi 16:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 22.022107] sd 16:0:0:0: Attached scsi generic sg3 type 0
[ 22.350481] usb 1-4: reset high-speed USB device number 12 using xhci_hcd
[ 22.480004] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800370ef1c0
[ 22.480012] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800370ef208
[ 22.584515] systemd-journald[256]: Received request to flush runtime journal from PID 1
[ 23.498701] RPC: Registered named UNIX socket transport module.
[ 23.498706] RPC: Registered udp transport module.
[ 23.498707] RPC: Registered tcp transport module.
[ 23.498709] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 23.535919] FS-Cache: Loaded
[ 23.557130] FS-Cache: Netfs 'nfs' registered for caching
[ 23.604425] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 24.615930] vboxdrv: Found 8 processor cores.
[ 24.616780] vboxdrv: fAsync=0 offMin=0x360 offMax=0xf016
[ 24.616896] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 24.616898] vboxdrv: Successfully loaded version 4.3.36_Debian (interface 0x001a000b).
[ 24.692907] sd 16:0:0:0: [sdc] Attached SCSI removable disk
[ 24.795642] ACPI Warning: \_SB_.PCI0.RP00.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 24.795822] ACPI: \_SB_.PCI0.RP00.VGA_: failed to evaluate _DSM
[ 24.795831] ACPI Warning: \_SB_.PCI0.RP00.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 25.963418] vboxpci: IOMMU not found (not registered)
[ 28.353452] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.353458] Bluetooth: BNEP filters: protocol multicast
[ 28.353470] Bluetooth: BNEP socket layer initialized
[ 30.621835] r8169 0000:04:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[ 30.621901] r8169 0000:04:00.0: Direct firmware load failed with error -2
[ 30.621904] r8169 0000:04:00.0: Falling back to user helper
[ 30.622637] r8169 0000:04:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-12)
[ 30.635296] r8169 0000:04:00.0 eth0: link down
[ 30.635379] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.637835] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 30.645359] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 30.888787] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 30.896315] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 30.956567] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.186474] wlan0: authenticate with 00:64:d9:1f:a9:06
[ 33.192578] wlan0: send auth to 00:64:d9:1f:a9:06 (try 1/3)
[ 33.195134] wlan0: authenticated
[ 33.198359] wlan0: associate with 00:64:d9:1f:a9:06 (try 1/3)
[ 33.203823] wlan0: RX AssocResp from 00:64:d9:1f:a9:06 (capab=0x431 status=0 aid=2)
[ 33.208518] wlan0: associated
[ 33.208591] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.208656] cfg80211: Calling CRDA for country: GB
[ 33.211533] cfg80211: Regulatory domain changed to country: GB
[ 33.211538] cfg80211: DFS Master region: ETSI
[ 33.211540] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 33.211545] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 33.211549] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 33.211552] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 33.211555] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 33.211558] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 34.561692] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
[ 39.400452] nouveau E[ PGRAPH][0000:01:00.0] grctx template channel unload timeout
[ 39.400512] nouveau E[ PGRAPH][0000:01:00.0] failed to construct context
[ 39.400516] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
[ 45.732604] ACPI Warning: \_SB_.PCI0.RP00.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 45.732775] ACPI: \_SB_.PCI0.RP00.VGA_: failed to evaluate _DSM
[ 45.732785] ACPI Warning: \_SB_.PCI0.RP00.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 73.007023] usb 1-4: USB disconnect, device number 12
[ 73.010599] scsi 16:0:0:0: rejecting I/O to offline device
[ 73.010606] scsi 16:0:0:0: killing request
[ 73.010656] scsi 16:0:0:0: [sdc] READ CAPACITY failed
[ 73.010662] scsi 16:0:0:0: [sdc]
[ 73.010664] Result: hostbyte=DID_OK driverbyte=DRIVER_ERROR
[ 73.010667] scsi 16:0:0:0: [sdc] Sense not available.
[ 73.262333] usb 1-4: new high-speed USB device number 13 using xhci_hcd
[ 73.458544] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 73.458553] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 73.458559] usb 1-4: Product: USB2.0-CRW
[ 73.458564] usb 1-4: Manufacturer: Generic
[ 73.458567] usb 1-4: SerialNumber: 20090516388200000
[ 73.464298] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 73.479821] scsi17 : usb-storage 1-4:1.0
[ 73.677948] usb 3-1.2: new high-speed USB device number 5 using ehci-pci
[ 73.773277] usb 3-1.2: New USB device found, idVendor=1004, idProduct=6300
[ 73.773285] usb 3-1.2: New USB device strings: Mfr=1, Product=4, SerialNumber=0
[ 73.773288] usb 3-1.2: Product: USB Charge Only Interface
[ 73.773290] usb 3-1.2: Manufacturer: LG Electronics Inc.
[ 73.859638] hidraw: raw HID events driver (C) Jiri Kosina
[ 73.861204] usbhid 3-1.2:1.0: couldn't find an input interrupt endpoint
[ 73.861238] usbcore: registered new interface driver usbhid
[ 73.861240] usbhid: USB HID core driver
[ 74.479950] scsi 17:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 74.480537] sd 17:0:0:0: Attached scsi generic sg3 type 0
[ 74.788737] usb 1-4: USB disconnect, device number 13
[ 74.796679] sd 17:0:0:0: [sdc] READ CAPACITY failed
[ 74.796682] sd 17:0:0:0: [sdc]
[ 74.796684] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 74.796685] sd 17:0:0:0: [sdc] Sense not available.
[ 74.796700] sd 17:0:0:0: [sdc] Write Protect is off
[ 74.796703] sd 17:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 74.796713] sd 17:0:0:0: [sdc] Asking for cache data failed
[ 74.796716] sd 17:0:0:0: [sdc] Assuming drive cache: write through
[ 74.796936] sd 17:0:0:0: [sdc] READ CAPACITY failed
[ 74.796938] sd 17:0:0:0: [sdc]
[ 74.796940] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 74.796941] sd 17:0:0:0: [sdc] Sense not available.
[ 74.796975] sd 17:0:0:0: [sdc] Attached SCSI removable disk
[ 75.036376] usb 1-4: new high-speed USB device number 14 using xhci_hcd
[ 75.474374] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 75.474380] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 75.474384] usb 1-4: Product: USB2.0-CRW
[ 75.474387] usb 1-4: Manufacturer: Generic
[ 75.474390] usb 1-4: SerialNumber: 20090516388200000
[ 75.480094] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 75.495479] scsi18 : usb-storage 1-4:1.0
[ 76.493825] scsi 18:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 76.494473] sd 18:0:0:0: Attached scsi generic sg3 type 0
[ 76.802935] usb 1-4: USB disconnect, device number 14
[ 76.810728] sd 18:0:0:0: [sdc] READ CAPACITY failed
[ 76.810736] sd 18:0:0:0: [sdc]
[ 76.810739] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 76.810741] sd 18:0:0:0: [sdc] Sense not available.
[ 76.810816] sd 18:0:0:0: [sdc] Write Protect is off
[ 76.810823] sd 18:0:0:0: [sdc] Mode Sense: 2e 2e 2f 2e
[ 76.810895] sd 18:0:0:0: [sdc] No Caching mode page found
[ 76.810902] sd 18:0:0:0: [sdc] Assuming drive cache: write through
[ 76.811307] sd 18:0:0:0: [sdc] Attached SCSI removable disk
[ 77.050150] usb 1-4: new high-speed USB device number 15 using xhci_hcd
[ 77.246511] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 77.246517] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 77.246520] usb 1-4: Product: USB2.0-CRW
[ 77.246522] usb 1-4: Manufacturer: Generic
[ 77.246524] usb 1-4: SerialNumber: 20090516388200000
[ 77.252453] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 77.267938] scsi19 : usb-storage 1-4:1.0
[ 78.267826] scsi 19:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 78.268448] sd 19:0:0:0: Attached scsi generic sg3 type 0
[ 78.576774] usb 1-4: USB disconnect, device number 15
[ 78.584627] sd 19:0:0:0: [sdc] READ CAPACITY failed
[ 78.584631] sd 19:0:0:0: [sdc]
[ 78.584633] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 78.584634] sd 19:0:0:0: [sdc] Sense not available.
[ 78.584676] sd 19:0:0:0: [sdc] Write Protect is off
[ 78.584690] sd 19:0:0:0: [sdc] Mode Sense: 2e 2e 2f 2e
[ 78.584742] sd 19:0:0:0: [sdc] Asking for cache data failed
[ 78.584747] sd 19:0:0:0: [sdc] Assuming drive cache: write through
[ 78.585005] sd 19:0:0:0: [sdc] READ CAPACITY failed
[ 78.585009] sd 19:0:0:0: [sdc]
[ 78.585010] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 78.585012] sd 19:0:0:0: [sdc] Sense not available.
[ 78.585040] sd 19:0:0:0: [sdc] Attached SCSI removable disk
[ 78.824291] usb 1-4: new high-speed USB device number 16 using xhci_hcd
[ 79.020567] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 79.020573] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 79.020576] usb 1-4: Product: USB2.0-CRW
[ 79.020578] usb 1-4: Manufacturer: Generic
[ 79.020580] usb 1-4: SerialNumber: 20090516388200000
[ 79.026414] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 79.041902] scsi20 : usb-storage 1-4:1.0
[ 80.041908] scsi 20:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 80.042516] sd 20:0:0:0: Attached scsi generic sg3 type 0
[ 80.295032] usb 1-4: USB disconnect, device number 16
[ 80.302826] sd 20:0:0:0: [sdc] READ CAPACITY failed
[ 80.302843] sd 20:0:0:0: [sdc]
[ 80.302846] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 80.302849] sd 20:0:0:0: [sdc] Sense not available.
[ 80.302897] sd 20:0:0:0: [sdc] Write Protect is off
[ 80.302904] sd 20:0:0:0: [sdc] Mode Sense: 2e 2e 2f 2e
[ 80.302991] sd 20:0:0:0: [sdc] Asking for cache data failed
[ 80.302998] sd 20:0:0:0: [sdc] Assuming drive cache: write through
[ 80.303324] sd 20:0:0:0: [sdc] Attached SCSI removable disk
[ 80.542397] usb 1-4: new high-speed USB device number 17 using xhci_hcd
[ 80.738751] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 80.738758] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 80.738761] usb 1-4: Product: USB2.0-CRW
[ 80.738764] usb 1-4: Manufacturer: Generic
[ 80.738766] usb 1-4: SerialNumber: 20090516388200000
[ 80.744812] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 80.760324] scsi21 : usb-storage 1-4:1.0
[ 81.760000] scsi 21:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 81.760770] sd 21:0:0:0: Attached scsi generic sg3 type 0
[ 82.013216] usb 1-4: USB disconnect, device number 17
[ 82.021065] sd 21:0:0:0: [sdc] READ CAPACITY failed
[ 82.021074] sd 21:0:0:0: [sdc]
[ 82.021077] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 82.021080] sd 21:0:0:0: [sdc] Sense not available.
[ 82.021162] sd 21:0:0:0: [sdc] Write Protect is off
[ 82.021170] sd 21:0:0:0: [sdc] Mode Sense: 2e 2e 2f 2e
[ 82.021250] sd 21:0:0:0: [sdc] No Caching mode page found
[ 82.021268] sd 21:0:0:0: [sdc] Assuming drive cache: write through
[ 82.021953] sd 21:0:0:0: [sdc] READ CAPACITY failed
[ 82.021963] sd 21:0:0:0: [sdc]
[ 82.021968] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 82.021973] sd 21:0:0:0: [sdc] Sense not available.
[ 82.022125] sd 21:0:0:0: [sdc] Attached SCSI removable disk
[ 82.260435] usb 1-4: new high-speed USB device number 18 using xhci_hcd
[ 82.698602] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 82.698606] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 82.698609] usb 1-4: Product: USB2.0-CRW
[ 82.698621] usb 1-4: Manufacturer: Generic
[ 82.698623] usb 1-4: SerialNumber: 20090516388200000
[ 82.704163] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 82.719324] scsi22 : usb-storage 1-4:1.0
[ 83.717784] scsi 22:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 83.718406] sd 22:0:0:0: Attached scsi generic sg3 type 0
[ 84.026987] usb 1-4: USB disconnect, device number 18
[ 84.034807] sd 22:0:0:0: [sdc] READ CAPACITY failed
[ 84.034815] sd 22:0:0:0: [sdc]
[ 84.034818] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 84.034821] sd 22:0:0:0: [sdc] Sense not available.
[ 84.034910] sd 22:0:0:0: [sdc] Write Protect is off
[ 84.034916] sd 22:0:0:0: [sdc] Mode Sense: 2e 2e 2f 2e
[ 84.035001] sd 22:0:0:0: [sdc] No Caching mode page found
[ 84.035008] sd 22:0:0:0: [sdc] Assuming drive cache: write through
[ 84.035464] sd 22:0:0:0: [sdc] Attached SCSI removable disk
[ 84.274237] usb 1-4: new high-speed USB device number 19 using xhci_hcd
[ 84.470626] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 84.470634] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 84.470638] usb 1-4: Product: USB2.0-CRW
[ 84.470642] usb 1-4: Manufacturer: Generic
[ 84.470644] usb 1-4: SerialNumber: 20090516388200000
[ 84.476655] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 84.492294] scsi23 : usb-storage 1-4:1.0
[ 85.491959] scsi 23:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 85.492806] sd 23:0:0:0: Attached scsi generic sg3 type 0
[ 85.800976] usb 1-4: USB disconnect, device number 19
[ 85.808848] sd 23:0:0:0: [sdc] READ CAPACITY failed
[ 85.808856] sd 23:0:0:0: [sdc]
[ 85.808859] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 85.808862] sd 23:0:0:0: [sdc] Sense not available.
[ 85.808941] sd 23:0:0:0: [sdc] Write Protect is off
[ 85.808949] sd 23:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 85.809029] sd 23:0:0:0: [sdc] No Caching mode page found
[ 85.809036] sd 23:0:0:0: [sdc] Assuming drive cache: write through
[ 85.809519] sd 23:0:0:0: [sdc] Attached SCSI removable disk
[ 86.048315] usb 1-4: new high-speed USB device number 20 using xhci_hcd
[ 86.486708] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 86.486714] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 86.486717] usb 1-4: Product: USB2.0-CRW
[ 86.486720] usb 1-4: Manufacturer: Generic
[ 86.486722] usb 1-4: SerialNumber: 20090516388200000
[ 86.492840] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 86.508540] scsi24 : usb-storage 1-4:1.0
[ 87.509659] scsi 24:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 87.510314] sd 24:0:0:0: Attached scsi generic sg3 type 0
[ 87.758828] usb 1-4: USB disconnect, device number 20
[ 87.766748] sd 24:0:0:0: [sdc] READ CAPACITY failed
[ 87.766756] sd 24:0:0:0: [sdc]
[ 87.766760] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 87.766762] sd 24:0:0:0: [sdc] Sense not available.
[ 87.766856] sd 24:0:0:0: [sdc] Write Protect is off
[ 87.766863] sd 24:0:0:0: [sdc] Mode Sense: 2e 2e 2f 2e
[ 87.766940] sd 24:0:0:0: [sdc] No Caching mode page found
[ 87.766948] sd 24:0:0:0: [sdc] Assuming drive cache: write through
[ 87.767460] sd 24:0:0:0: [sdc] Attached SCSI removable disk
[ 88.006164] usb 1-4: new high-speed USB device number 21 using xhci_hcd
[ 88.444355] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 88.444363] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 88.444367] usb 1-4: Product: USB2.0-CRW
[ 88.444370] usb 1-4: Manufacturer: Generic
[ 88.444372] usb 1-4: SerialNumber: 20090516388200000
[ 88.450261] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 88.465725] scsi25 : usb-storage 1-4:1.0
[ 89.467489] scsi 25:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 89.468200] sd 25:0:0:0: Attached scsi generic sg3 type 0
[ 89.772681] usb 1-4: USB disconnect, device number 21
[ 89.780432] sd 25:0:0:0: [sdc] READ CAPACITY failed
[ 89.780438] sd 25:0:0:0: [sdc]
[ 89.780441] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 89.780444] sd 25:0:0:0: [sdc] Sense not available.
[ 89.780529] sd 25:0:0:0: [sdc] Write Protect is off
[ 89.780535] sd 25:0:0:0: [sdc] Mode Sense: 02 00 00 00
[ 89.780610] sd 25:0:0:0: [sdc] No Caching mode page found
[ 89.780617] sd 25:0:0:0: [sdc] Assuming drive cache: write through
[ 89.781048] sd 25:0:0:0: [sdc] Attached SCSI removable disk
[ 90.019947] usb 1-4: new high-speed USB device number 22 using xhci_hcd
[ 90.458188] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 90.458195] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 90.458198] usb 1-4: Product: USB2.0-CRW
[ 90.458200] usb 1-4: Manufacturer: Generic
[ 90.458202] usb 1-4: SerialNumber: 20090516388200000
[ 90.464065] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 90.479513] scsi26 : usb-storage 1-4:1.0
[ 91.481254] scsi 26:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 91.481722] sd 26:0:0:0: Attached scsi generic sg3 type 0
[ 91.786428] usb 1-4: USB disconnect, device number 22
[ 91.794300] sd 26:0:0:0: [sdc] READ CAPACITY failed
[ 91.794308] sd 26:0:0:0: [sdc]
[ 91.794312] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 91.794315] sd 26:0:0:0: [sdc] Sense not available.
[ 91.794397] sd 26:0:0:0: [sdc] Write Protect is off
[ 91.794404] sd 26:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 91.794486] sd 26:0:0:0: [sdc] No Caching mode page found
[ 91.794494] sd 26:0:0:0: [sdc] Assuming drive cache: write through
[ 91.795061] sd 26:0:0:0: [sdc] Attached SCSI removable disk
[ 92.033758] usb 1-4: new high-speed USB device number 23 using xhci_hcd
[ 92.230036] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[ 92.230043] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 92.230047] usb 1-4: Product: USB2.0-CRW
[ 92.230050] usb 1-4: Manufacturer: Generic
[ 92.230052] usb 1-4: SerialNumber: 20090516388200000
[ 92.236098] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 92.251860] scsi27 : usb-storage 1-4:1.0
[ 93.251199] scsi 27:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 93.251471] sd 27:0:0:0: Attached scsi generic sg3 type 0
[ 93.580156] usb 1-4: reset high-speed USB device number 23 using xhci_hcd
[ 93.709412] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800ba727e80
[ 93.709415] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800ba727ec8
[ 95.922464] sd 27:0:0:0: [sdc] Attached SCSI removable disk
[ 6946.867591] usb 3-1.2: USB disconnect, device number 5
[ 6969.568965] usb 3-1.2: new high-speed USB device number 6 using ehci-pci
[ 6969.663492] usb 3-1.2: New USB device found, idVendor=1004, idProduct=6300
[ 6969.663495] usb 3-1.2: New USB device strings: Mfr=1, Product=4, SerialNumber=0
[ 6969.663497] usb 3-1.2: Product: USB Charge Only Interface
[ 6969.663498] usb 3-1.2: Manufacturer: LG Electronics Inc.
[ 6969.664398] usbhid 3-1.2:1.0: couldn't find an input interrupt endpoint
[ 9764.272376] perf interrupt took too long (2528 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
More information about the Pkg-acpi-devel
mailing list