[Pkg-electronics-commits] [openocd] annotated tag upstream/0.10.0 created (now 01d46a1)
Jonathan McDowell
noodles at moszumanska.debian.org
Tue Oct 31 21:15:07 UTC 2017
This is an automated email from the git hooks/post-receive script.
noodles pushed a change to annotated tag upstream/0.10.0
in repository openocd.
at 01d46a1 (tag)
tagging ab9a5d19e71098918af03247353fddc88a6ffd45 (commit)
replaces upstream/0.9.0
tagged by Jonathan McDowell
on Fri Aug 18 09:32:22 2017 +0100
- Log -----------------------------------------------------------------
Upstream version 0.10.0
Alamy Liu (6):
flash/nor/jtagspi: 'retval' may be used uninitialized
adi_v5: Fix wrong ap value
cortex-a: Fix "Detected core" number is always '0'
adi_v5: Rename AP_REG_* to MEM_AP_REG_* and add LA support
adi_v5: return proper value on timeout
adi_v5: Remove forgotten FIXME definition
Aleksander Morgado (1):
arm7: add missing braces around an if()
Alex Forencich (1):
flash/nor/spi: Add Winbond w25q128fv
Alexander Drozdov (1):
RTOS: ThreadX support on ARM926E-JS
Alexander Kurz (11):
Helper time_support: const function arguments
cfi intel: fixing faulty flash write error message
Cleanup: removal of obsolete semicolons
flash/nor/non_cfi.c: cleanup, member double-intialization
flash/nor/stellaris: fix: flash info RCC and RCC2 mixed up
arm_disassembler: bugfix, MRRC instruction not recognized
flash/nor/faux.c: fixing check for failed malloc
tcl/target/stm32f4: fix: reduce adapter speed before reset
Helper ioutil: cleanup: removing dead code
udev: add rule for original Keil ULink (version 1)
jtag ulink: dont compile function when not required
Andreas Bolsch (2):
Cortex-M7 handling.
Flash handling for STM32F76x/77x and F446 added
Andreas Fritiofson (51):
swd: Remove DAP from parameter list
target/arm: Remove usage of struct arm_jtag in ARMv7 targets
arm_adi_v5: Remove unused is_swd flag
arm_adi_v5: Add a back-pointer from an AP to its DAP
cortex_a: Call ahbap_debugport_init on the discovered AP and not 0
cortex_m: Discover the AP to use, just like Cortex-A
arm_adi_v5: Convert the AP references from numbers to pointers
cortex_a: Find debug base using the detected APB-AP and not AP 1
arm_adi_v5: Change mem_ap calls to take pointer to AP and not DAP
arm_adi_v5: Clean up dap info command
arm_adi_v5: Split ahbap_debugport_init
arm_adi_v5: Rename TAR and CSW setters and make them AP-specific
arm_adi_v5: Remove all mem_ap_sel_* functions
adi_v5_jtag: Remove TAR and CSW prints from jtagdp_transaction_endcheck
cortex: Set default memaccess_tck only during examine
arm_adi_v5: Remove all cases of "restoring" previous dap_ap_select()
arm_adi_v5: Fix dap apsel confusing behaviour.
arm_adi_v5: dap_queue_ap_* DAP->AP parameter
arm_adi_v5: Make the DAP API stateless
helper: Add converter from JEP106 ID to manufacturer name
adi_v5_swd: Avoid special handling the SELECT cache during connect
arm_adi_v5: Rewrite dap_rom_display
jim-nvp: Make Jim_GetOpt_String const-correct
stm32lx: Add support for lock/unlock (RDP Level 0<->1)
arm_adi_v5: Update DP (Debug Port) registers defined in ADIv5.2.
cortex_a: Rename APB-AP to CPU in memory contexts
at91sam7: do not touch flash banks which belong to other targets
ftdi: don't wait forever if we fail
stm32f2x: Increase options write timeout
cfg: Don't check BS TAP IDCODE in STM32 configs
Remove since long deprecated ft2232 driver
Remove support for the GPL incompatible FTDI D2XX library
helper: Update jep106 database to JEP106AT
configure: Detect libftdi using pkgconfig
configure: Remove conflicting CMSIS_DAP conditional
configure: Remove unused BUILD_BITQ and BUILD_BITBANG define
Remove build date from banner for releases
xscale: Move debug handler to contrib/loaders
configure: Replace shell constructs with M4sh macros
target: Replace malloc+manual zeroing with calloc
configure: Use same case for libjaylink as for other libs
configure: Add USE_* conditionals for hidapi and libjaylink
configure: Don't set user variables
configure: Consolidate platform defines
Convert to non-recursive make
configure: De-duplicate code in AC_CHECK_HEADERS
Deprecate ZY1000, ioutils and oocd_trace
configure: Fail on enabling sysfsgpio on non-linux OS
Search for scripts relative to the executable on all(?) platforms
helper,rtos,server: Restore missing warning flags
doc: Improve ftdi driver section
Andreas Färber (69):
tcl/target: Add Freescale Vybrid VF6xx config
tcl/board: Add EmCraft VF6 SOM and baseboard configs
tcl/interface/ftdi: Add Digilent JTAG-HS3 config
zynq_7000: Add expected ID
tcl/board: Add Parallella-I board config
tcl/target: Add config for XMOS XS1-XAU8A-10's ARM core
tcl/board: Add config for XMOS xCORE-XA Core Module ARM debugging
tcl/target: Add Exynos5250 config
tcl/board: Add Arndale config
fm4: Split out S6E2CC family config
tcl/target: Prepare FM4 MB9BFxxx family
fm4: Add JTAG support
tcl/board: Add Spansion SK-FM4-U120-9B560 config
doc: Fix sort order of flash drivers
tcl/target: Add LPC4357 config
tcl/board: Add Diolan LPC4357-DB1 config
lpc8xx: Allow CHIPNAME override
lpc4350_spifi_generic: Clean up work area size
tcl/board: Add LPC-Link2 config
flash/nor/xmc4xxx: Loosen checks for XMC4500
tcl/target: Add Nordic nRF52 config
xmc4xxx: Make sector sizes const
xmc4xxx: Add XMC4800 support
tcl/board: Add Infineon XMC4800 Relax EtherCAT Kit config
tcl/board: Add Infineon XMC4700 Relax Kit Series config
tcl/target: Add Renesas S7G2 config
tcl/board: Add Renesas DK-S7G2 config
xmc4xxx: Add XMC4700 support
flash: New Spansion FM4 flash driver
xmc4xxx: Integrate build of erase check code
armv7m: Integrate build of erase check code
fm4: Add support for MB9BFx64/x65
fm4: Add support for S6E2DH family
flash/nor: Reorder drivers alphabetically
flash/nor: Add Infineon XMC1000 flash driver
fm4: Set read callback
xmc4xxx: Fix error propagation for erase_check callback
armv7m: Improve armv7m_blank_check_memory() error handling
xmc4xxx: Improve xmc4xxx_blank_check_memory() error handling
arm_adi_v5: Reorder Atmel part number entry
doc: Fix mismerges of fm4, kinetis and kinetis_ke flash drivers
arm_adi_v5: Adjust part number column alignment
arm_adi_v5: Add part number for Infineon XMC1000 family
arm_adi_v5: Add part numbers for Infineon XMC4000 family
arm_adi_v5: Add part number for TI MSP432P401R
kinetis: Fix typo in variable names
Fix spelling of ARM Cortex
tcl/target: Add config for TI MSP432P4xx
lpcspifi: Fix SWD support for LPC43xx
xmc4500: Disable SRST for SDRAM App Kit
tcl/target: Add PSoC 5LP config
armv4_5: Improve arm_blank_check_memory() error handling
armv4_5: Improve arm_checksum_memory() error handling
armv7m: Integrate build of checksum code
armv4_5: Integrate build of erase check code
armv4_5: Integrate build of checksum code
Fix usage of timeval_ms()
contrib/loaders: Add umbrella Makefile
kinetis_ke: Switch to standard build variables
contrib/loaders: Enforce Little Endian ARM machine code
x86_32_common: Fix typo in function name
nds32: Fix typo in debug log
target: Fix working_area_phys_spec comment
breakpoints: Add missing space in error message
target: Add missing spaces in error messages
target: Clean up format strings
flash/nor: Add erased_value to drivers and pass it to targets
xmc4xxx: Add support for XMC4300
tcl/board: Add Infineon XMC4300 Relax EtherCAT Kit config
Andreas Loehre (1):
flash: at91samd: Add SAML21 variant B device support and fix SAMC20/SAMC21
Andrew Kohlsmith (1):
add Digilent HS2 support
Andrew Ruder (2):
rtos: turn stack alignment into a function pointer
rtos: handle STKALIGN adjustments on cortex m
Andrey Skvortsov (1):
flash: nor: mdr: fix verification problem with 1986VE1T or 1986VE3T
Andrey Smirnov (1):
semihosting armv7a: Add support for ARMv7-A
Andrey Yurovsky (1):
at91samd: add chip IDs for SAMC20 and SAMC21 families
Andy Pomfret (1):
rtos: removed chSysInit from detection of ChibiOS (#121)
Antony Pavlov (7):
tcl/fpga: add config file for Altera EP3C10 FPGA (Cyclone III family)
tcl/interface/ftdi: add config for the MBFTDI adapter
tcl/board: add Marsohod2 FPGA board config
tcl/fpga: add config file for Altera 10M50 FPGA (MAX10 family)
tcl/board: add Marsohod3 FPGA board config
tcl/cpld: add config file for Altera EPM240 CPLD (MAXII family)
tcl/board: add Marsohod CPLD board config
Austin Morton (2):
server: tcl_trace command
server: remove connection limit from tcl and telnet servers
Bogdan Kolbov (2):
niietcm4: support for NIIET's Cortex-M4 microcontrollers
flash/nor/niietcm4: minor fixes
Christoph Pittracher (1):
bcm2835gpio: Add SWD support, Raspberry Pi 2 support.
Christopher Head (1):
Add Altera USB Blaster udev rule.
Colin Helliwell (1):
at91sam4 Flash: Added identification of atsam4n's
Esben Haabendal (4):
cfi: Fix fallback to memory writes
cfi: support for 16-bit flash with reversed endianness
Support for Freescale LS102x SAP
cfi: Add support for strangely endianness broken SoC implementations
Evan Hunter (10):
gdb_server: Add check for malloc fail
flash : Add support for Atmel at91sam4sa16b
ADIv5: Fix typo in log message
Documentation : Add missing commands for ARM-v7A & R
Cortex A/R : Allow interrupt disable during single-step
ADIv5: convert numeric values to use defines with meaningful names
Cortex-A: Fix unicode quote in comment
Cortex-A/R: Add missing timeout for loop polling DSCR & fix timeout types
Cortex-A/R: Fix Mask-ISR parsing
Cortex-R: Force usage of physical memory read/write since there is no MMU
Felipe Balbi (2):
board: ti_am437x_idk: default to 1000kHz
jtag: commands: save a pointer to list tail
Felix Held (1):
xilinx-xc7: correct Artix7 15T IDCODE
Forest Crossman (1):
tcl/board: Add Digilent Analog Discovery config
Freddie Chopin (1):
Add board config for ST NUCLEO L476RG board
Fredrik Hederstierna (1):
swd: Add support for connect_assert_srst for SWD.
Gabrielle Trotter (1):
atsamv: Support for ATSAMS70N19 Memory Configuration
George Ioakimedes (1):
psoc4: Corrected Silicon IDs
Harald Welte (1):
AM335x: Disable watchdog on 'reset halt'
HarishKumar (1):
Tcl commands: Fix improper return status in flash commands and load_image.
Ivan Buliev (1):
flash: Analog Devices ADuCM360 support
Ivan De Cesaris (2):
quark: updating license to GPLv2+
quark: add Intel Quark mcu D2000 support
Ivan Meleca (1):
flash: Added support for Freescale Kinetis KE family.
Ivo Manca (2):
nand: fix return value
nand: change use_raw to boolean
Jacob Rosenthal (1):
flash: nor: nrf51: add hwid 0x0057
Jakub Kubiak (1):
flash/nor/lpc2000: add alternative part ID for LPC1343
James Mastros (1):
arm_adi_v5: Add a few dap component ids, covers the atmel at91sam.
Jeff Ciesielski (1):
flash: New driver for XMC4xxx microcontroller family
Jim Norris (1):
tcl/target: Add configuration for NXP LPC4370 processor
Jim Paris (1):
stlink_usb: fix typo
Jiri Kastner (5):
arm_adi_v5: dap_partnums - correction of partnumbers, new added
arm_adi_v5: added partnumbers
arm_adi_v5: added partnumber for APQ8016
dap_dp_init: remove loop
contrib: udev: modify rules for users physically in front of machine (TAG+="uaccess")
Jiří Pinkava (1):
nrf51: show proper part number
Jonathan Dumaresq (2):
RTOS support: Add FPU support for FreeRTOS
RTOS support: Correction of out of bound access of thread array
Jonathan Larmour (2):
helper/options: Use OPENOCD_SCRIPTS dir if set.
tcl/board: Remove pflash.0 bank from twr-k60n512.cfg
Jonathan McDowell (1):
New upstream version 0.10.0
Karl Palsson (3):
target: check memory handlers before use for all types
efm32: basic Happy Gecko target support
efm32: remove duplicate part name decoding.
Kent Brinkley (2):
Change isa string
mips: Added #define for scan_delay legacy mode default value
Kyle Manna (2):
udev: Add J-Link on-board nRF51-DK
jlink: Add on-board nRF51-DK USB VID and PID
Lieven Hollevoet (1):
Support for debug interface lock of EFM32 controllers
Linus Walleij (1):
armv4_5: support weirdo ARMv6 secure monitor mode
Mahavir Jain (1):
flash/nor/spi: Add GigaDevice gd25q16c/32c/128c flash support
Manuel Limones (1):
tlc/board: Add ATMEL SAM E70 Xplained config
Marc Schink (29):
armv7m: Fix memory leak in register caching.
helper/fileio: Use size_t for file size.
helper/fileio: Fix memory leak.
helper/ioutil: Rename MixedCaps function.
helper/log: Cleanup #includes.
helper/options: Cleanup #includes.
Improve J-Link driver and introduce libjaylink.
jlink: Retrieve maximum speed from device.
jlink: Update for libjaylink API changes
helper/fileio: Remove nested struct
interface/jlink: Fix comment about serial number
server/telnet: Check malloc() return values
libjaylink: Update to latest master branch
board/efm32: Disable SRST
Remove FSF address from GPL notices
Make #include guard naming consistent
helper/log: Add log_vprintf_lf()
jlink: Adjust log verbosity of libjaylink
libjaylink: Update for API changes
helper: Make unhexify() robust on invalid data
configure.ac: Fix libjaylink integration
drivers/Makefile.am: Fix libjaylink integration
configure.ac: Fix J-Link adapter description
Fix autogen.sh invocation of libjaylink
helper: Code cleanup for hexify()
jlink: Add EMUCOM support
libjaylink: Update to latest master branch
jlink: Output libjaylink version
libjaylink: Update to 0.1.0 release
Matthew Campbell (1):
sysfsgpio: support broken gpio implementations
Matthias Welwarsky (45):
board: don't hardcode interface for ti_beaglebone
Revert "board: don't hardcode interface for ti_beaglebone"
armv7a: re-read ttb information if ttbcr changes
armv7a: correct calculation of ttbr0_mask
armv7a: rename l2_cache to outer_cache
armv7a: remove special l2x flush-all and cache-info handlers
armv7a: fix handling of inner caches
armv7a: remove indirection for cache info handler
armv7a: add d-cache virtual address range flush function
armv7a: rework automatic flush-on-write handling
armv7a: fix debug messages regarding cache on/off state
armv7a: correctly handle invalidation of inner data caches
cortex_a: Update instruction cache after setting a soft breakpoint
armv7a: fix-up dcache clean and flush functions inner loop pattern
cortex_a: force cache and tlb bypass when cpu is in debug state
cortex_a: rework mmu manipulation
cortex_a: replace cortex_a_check_address function
cortex_a: fix fast-mode memory reads
cortex_a: select APB-AP as the default AP
arm_debug: optimize DP and AP reads over JTAG
AM335x: allow simultaneous debugging of A8 and M3 cores
cortex_a: add 'dacrfixup' to cortex-a command group
adi_v5_jtag: implement DAP WAIT support
adiv5: introduce optional dap_sync() function
am437x: always use highest possible JTAG clock.
jtag ftdi: sample TDO on falling edge of TCK
ftdi: allow selecting device by usb bus location
cortex_a: allow physical memory access through AHB-AP again
ftdi: make ftdi_location command depend on libusb1 version
cortex_a: fix cortex_a_assert_reset() if srst_gates_jtag
tcl: add mrb command to mem_helper.tcl
Fix resume when core state has been modified
target: add "phys" argument to mem2array, array2mem
adi_v5_jtag: clear sticky overrun condition in WAIT timeout
board: add configuration for freescale imx6q sabresd board
cmsis-dap: add JTAG pass-through mode
cortex_a/r/m: fix handling of un-examined cores
Add -defer-examine option to target create command
cortex_a: remove partnum magic from arp_examine and dbginit
target: Add verify_image_checksum command
cortex_m: allow setting debug ap during create
cortex_a: fix reset for SWD transport
board: add configuration for freescale twr-vf65gs10 system module
adi_v5_jtag: make sure SSTICKYERR is cleared after a POR
arm_dpm: avoid duplicating the register cache
Maxime Coquelin (2):
flash/nor/stm32f2x: Add STM32F469 part
tcl: add STM32F469 discovery board config
Michael Dietz (1):
nRF51: Fix bug in Code memory size.
Morgan Quigley (3):
tcl/target: add config for Atmel SAMV / SAMS / SAME
tcl/board: add Atmel SAM V71 Xplained Ultra
flash: driver for Atmel SAMV, SAMS, and SAME
Nemui Trinomius (1):
numicro: Integrate Nuvoton NuMicro flash driver.
Olaf Lüke (1):
at91samd: Add Atmel SAMD09 family support
Oleksij Rempel (9):
target: tell which target state is meant
tcl/target|board: add config Atheros ar2313
tcl/target|board: add config Atheros ar2315
cortex_a: remove ahb support for phys_memory access
cortex_a: remove cache handlers from cortex_a_write_phys_memory
cortex_a: add cortex_a_[read|write]_buffer
cortex_a: add cortex_a_[read|write]_memory_ahb
add armv7a_cache handlers
armv7a: remove l1 flush all data handler
Owen Kirby (2):
at91sam4: Add flash description and chipid for SAM4Cxx variants.
at91sam4: Add missing SAM4S family CHIPIDs and remove FWS=6.
Patrick Stewart (3):
Kinetis: Add K24 support and tidy up
cortex_m: Select an AP when accessing the DAP
arm_debug: Support multiple APs per DAP and remove DAP from armv7* structs
Paul Fertser (44):
Restore normal development cycle
manual: make it compatible with ancient texinfo versions that lack @raggedright
sim3x: fix build failure with clang 3.6
svf: flush the queue before reallocing memory
svf: fix segfaults exposed by some SVF
Change from sys/poll.h to standard poll.h location
target: cortex_a: do not create new register cache every reset
target: cortex_a: add deinit_target handler to free memory
tcl/interface/ftdi: add 100ask's OpenJTAG config
svf: fix off-by-one error in line numbers as output to user
svf: fix progress reporting switch behaviour
xsvf: output a warning suggesting using SVF
jtag: drivers: bcm2835gpio: fix a typo in informational message
target: cortex_m: fix segfault with HLA
drivers: jlink: rework to allow scans of arbitrary length, bump libjaylink
flash: nor: {pic32mx,cfi}: fix register names
flash: nor: mdr: implement read/verify for Info memory
checkpatch.pl: fix unescaped left brace warnings
configure.ac: support MSYS with newer config.guess
jtag: drivers: cmsis-dap: add TRST handling
jtag: drivers: mpsse: ignore error to detach kernel driver
flash: nor: lpc2000: handle lpc11xx parts with more than 96k memory
flash: nor: mdr: do not mass erase when clearing INFO memory
Replace "daemon" with "server" in user-visible strings
jtag: drivers: cmsis-dap: fix operation with SAMD10 Xplained board
target: LS1_SAP: fix "declaration of 'read' shadows a global" warning
jtag: drivers: ulink: fix uninitialised variable warning
jimtcl: update to 0.77, the current version, enable only specific modules
README: fix a typo
target: cortex_a: fix segfault when SPSR is not properly handled
tcl: target: imx5{1,3}: remove bogus tapenable command
target: armv7a: remove unused level_num field from armv7a_cachesize
doc: add a cross-reference to GDB threading commands
doc: fix underfull and overfull boxes
NEWS: prepare for new release
The openocd-0.10.0-rc1 release candidate
Restore -dev suffix
jtag: drivers: build usb_blaster only if enabled
jtag: core: report TRST and SRST as asserted only when they really are
NEWS: mention SWO capture facility of the new J-Link driver
The openocd-0.10.0-rc2 release candidate
Restore -dev suffix
NEWS: last pre-release changes
The openocd-0.10.0 release
Peter A. Bigot (7):
nrf51: recognize hwid 0084
arm_adi_v5: deconflict local variables from global symbols
jlink: deconflict local variables from global symbols
nrf51: move table entry for hwid 0084 to correct MCU section
nrf51: move hwid 0057 and add 0058
gdb_server: support disabling server
doc: correct and standardize instructions for disabling TCP servers
Peter D. Gray (2):
Add support for Atmel AT91SAMD21E16B (B variant) and a spelling mistake.
at91samd: Add additional "B Variant" parts from SAMD21 family
Peter Kuhar (1):
STM32L433 Flash support
Peter Lawrence (2):
ARM ADIv5: CoreSight ROM decode part number and designer id
tcl: Support for Analog Devices ADSP-SC58x
Philipp Wagner (1):
tcl_server: Support line buffers up to 4M (v3)
Radek Dostal (1):
tcl: replace $TARGETNAME with $_TARGETNAME
Ragnar Sundblad (1):
topic: Interface config file for FTDI UM232H module
Remco Bloemen (1):
interface: Add XDS100v3 support.
Rick Foos (2):
flash/nor: Add Ambiq Micro Apollo flash driver.
tcl/board: Add board configuration for nRF51-DK, and nRF52-DK.
Robert Jordens (11):
target/testee: manage target->state
flash/nor/spi: add micron/numonyx n25q128
cpld/virtex2: allow JSTART to be disabled
flash/nor/tcl: add read_bank and verify_bank
flash/nor/jtagspi: add JTAGSPI driver
pipistrello: ftdi-jtag/spartan6/jtagspi board
kc705: digilent-jtag/kintex7/jtagspi board
flash/nor/spi: reorder to group micron devices
flash/nor/spi: fix macronix 25l1005 chip erase
flash/nor/spi: use only lower case hex numbers
xilinx_bscan_spi: port to new migen and clean-up
Rémi PRUD’HOMME (1):
Add config files for STM32F7-DISCO and STM327[4|5]6G-EVAL.
SASANO Takayoshi (1):
pic32mx: add new device ID, 17x/27x Flash support
Salvador Arroyo (2):
Fix for BMIPS
MIPS32 Fix typos
Samuel Martin (1):
tcl: add STM32F429I-DISC1 board config
Sandeep Mistry (1):
gdb server: Add back support to disable the gdb server via the gdb_port config
Sean Cross (2):
tcl/board: add configuration for Novena's integrated FPGA
jtag: drivers: bcm2835gpio: set 4ma drive, slow slew rate
Sergey A. Borshch (1):
jlink: fix jlink regression introduced by ae8cdc commit
Spencer Oliver (2):
libjaylink: use http mirror for submodule
stm32l4x: fix incorrect device id mask
Stephen Tridgell (1):
ftdi: Added a method to read the signal values
Steven Stallion (6):
server: support binding to arbitrary interfaces
rtos: remove display_str member
kinetis: support mass erase on boards without SRST
rtos: add support for uC/OS-III
semihosting: support fileio operation
gdb_server: support qXfer:threads:read packet
Thomas Schmid (1):
Kinetis: Disable watchdog on Kx devices when programming.
Tim 'mithro' Ansell (5):
tcl: Setting lowlevel driver for ixo-usb-jtag
tcl: Adding the Digilent Atlys board.
tcl: Adding the Numato Opsis board.
tcl: Support for reading "Device DNA" from Spartan 6 devices.
tcl: Support for the miniSpartan6+ board.
Tim Newsome (3):
Fix comment that limits num_bits to 32.
Perform small writes before sending OK.
Make OpenOCD build using -Og.
Tomas Vanek (39):
Kinetis: give a reasonable default for max_flash_prog_size
Kinetis: new devices K02, K26, K63, K64, K66, correct K21 and K22 variants
cortex_m: dwt_num_comp should be set to zero in cortex_m_dwt_free()
Kinetis: properly pad flash section writes
at91samd: handle reset run/halt in DSU
jtag: cmsis-dap: Issue disconnect before reconnecting
flash: at91samd: flash write code cleaning
Kinetis: suppress false alarms "MCU is secured"
adi_v5_swd: invalidate dap->select during (re)connect
Kinetis: FlexNVM handling
Kinetis: kinetis_ftfx_command() based on target instead of flash bank
Kinetis: fix preparation of FlexRAM before flash programming
Kinetis: nvm_partition command
Kinetis: improve flash detection using SIM_FCFG2 MAXADDR0 and MAXADDR1
Kinetis: invalidate flash cache after erase/write
Kinetis: check/switch run mode before flash operation
Kinetis: flash driver described in openocd.texi
flash Kinetis: remove TARGET_HALTED halted check from probe
flash Kinetis: new KVx family added
target: improve robustness of reset command
at91samd: Atmel SAML22 (segment LCD) family added
arm_adi_v5: add dap apreg command for AP register read/write
psoc4.cfg: fixed typo in message, add a hint
target: check late abort from target in async_algorithm
flash Kinetis: Detect RESET/WDOG loop, fix detection of secured MCU
flash Kinetis: dynamic status detection before starting mass_erase
flash/nor: implement protection blocks of different size than erase sector
flash Kinetis: refactoring ftfx commands and numerous minor changes
flash Kinetis: Implement flash protection setting
cortex_m: fix autoincrement range of Cortex-M7
flash Kinetis: fix mdm check_security regression in JTAG mode
flash Kinetis: longword programming changed to flash_async_algorithm
flash Kinetis: add cache invalidate for KLx series
flash Kinetis: Family K8x added
flash at91samd, at91sam4l: fix improper use of mem_ap_ call
tcl at91samdXX.cfg: update config to current OpenOCD status
flash/nor: at91samd protection bits write fix
tcl at91samdXX.cfg: partially revert change 3722
flash/nor: fix doc/help and range test for flash protect
Uwe Bonnes (27):
Cortex-M: Detect Flash Patch Revision and implement Rev. 2 handling.
stm32f2x.c: Handle STM32F42x/43x 1 MiByte devices with DB1M option set.
stm32f2x.c: Add STM32F74x handling.
stm32f2x: Add memory barrier needed for STM32F7 flashing.
Add handling for STM32L4.
stm32xxx.cfg: Only touch IWDG and WWDG in DBGMCU_APB1_FZ.
tcl: Add default hooks for STM32F4x
tcl: Add default hooks for STM32F0x
stm32l4: Add cpu and stm32l4discovery board configuration.
stm32lx.c: Add STM32L0 categories 1, 2 and 5.
stm32lx.c: Print device string as info.
stm32l4x.c: Free r6/7 for 64-bit operations.
stm32l4x.c: Use explicit 64-bit flash access as reference manual implies.
stm32l4x.c: Correct waiting for data.
src/flash/nor/stm32f2x.c: Really erase second bank if requested.
stm32f2x.c: Add more F4 devices.
Cortex-M7: Give user a hint about single stepping problem up to r0p1.
stlink: Decode more errors.
stm32l4x.cfg: Fix RCC_CR address.
stm32l1/Cat.3: Devices have only one bank.
stm32f7x.cfg: Fix expected JTAG id.
tcl/target/stm32l4x.cfg: Reduce adapter speed before reset.
tcl/target/stm32f4x.cfg: Use Workareasize of smallest possible device.
stm32l4: Handle failing flash_size read like on other devices.
flash/nor/tcl.c: Less verbose output of flash erase_check.
target/stm32f4x.cfg: Add STM32F410/F412/F469.
stm32l0.cfg: Add examine-end event like on other STM32 targets.
Vianney le Clément de Saint-Marcq (1):
jtag/drivers/openjtag: Add support for Cypress CY7C65215
Vivien Didelot (1):
tcl/board: add Linksys WAG200G config
anpilog (1):
cmsis-dap: Fix CMSIS-DAP serial number processing.
daniel-k (1):
rtos/mqx: Fix uninitialized parts of symbol table
fenugrec (1):
docs: added note for increasing gdb remotetimeout when using the "gdb_port pipe" command.
kevin (1):
flash/nor/efm32: Support flash size smaller than 32k
-----------------------------------------------------------------------
No new revisions were added by this update.
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-electronics/openocd.git
More information about the Pkg-electronics-commits
mailing list