[Pkg-electronics-devel] Bug#1139512: linux-gpib-user: FTBFS: LaTeX error
Santiago Vila
sanvila at debian.org
Tue Jun 9 11:29:43 BST 2026
Package: src:linux-gpib-user
Version: 4.3.7-5
Severity: serious
Tags: ftbfs forky sid
Dear maintainer:
During a rebuild of all packages in unstable, this package failed to build.
Below you will find the last part of the build log (probably the most
relevant part, but not necessarily). If required, the full build log
is available here:
https://people.debian.org/~sanvila/build-logs/202606/
About the archive rebuild: The build was made on virtual machines from AWS,
using sbuild and a reduced chroot with only build-essential packages.
If you cannot reproduce the bug please contact me privately, as I
am willing to provide ssh access to a virtual machine where the bug is
fully reproducible.
If this is really a bug in one of the build-depends, please use
reassign and add an affects on src:linux-gpib-user, so that this is still
visible in the BTS web page for this package.
Thanks.
--------------------------------------------------------------------------------
[...]
debian/rules clean
dh clean
debian/rules execute_after_dh_auto_clean
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_auto_clean --buildsystem=pybuild --sourcedirectory=language/python
touch ChangeLog
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: configure.ac: no obvious need to run autopoint
[... snipped ...]
Note: Writing man/man3/FindRQS.3
Note: Writing man/man3/PassControl.3
Note: Writing man/man3/PPoll.3
Note: Writing man/man3/PPollConfig.3
Note: Writing man/man3/PPollUnconfig.3
Note: Writing man/man3/RcvRespMsg.3
Note: Writing man/man3/ReadStatusByte.3
Note: Writing man/man3/Receive.3
Note: Writing man/man3/ReceiveSetup.3
Note: Writing man/man3/ResetSys.3
Note: Writing man/man3/Send.3
Note: Writing man/man3/SendCmds.3
Note: Writing man/man3/SendDataBytes.3
Note: Writing man/man3/SendIFC.3
Note: Writing man/man3/SendList.3
Note: Writing man/man3/SendLLO.3
Note: Writing man/man3/SendSetup.3
Note: Writing man/man3/SetRWLS.3
Note: Writing man/man3/TestSRQ.3
Note: Writing man/man3/TestSys.3
Note: Writing man/man3/Trigger.3
Note: Writing man/man3/Trigger.3
Note: Writing man/man3/WaitSRQ.3
Note: Writing man/man3/AsyncIbcnt.3
Note: Writing man/man3/AsyncIberr.3
Note: Writing man/man3/AsyncIbsta.3
Note: Writing man/man3/CFGn.3
Note: Writing man/man3/GetPAD.3
Note: Writing man/man3/GetSAD.3
Note: Writing man/man3/MakeAddr.3
Note: Writing man/man3/MLA.3
Note: Writing man/man3/MSA.3
Note: Writing man/man3/MTA.3
Note: Writing man/man3/PPE_byte.3
Note: Writing man/man3/ThreadIbcnt.3
Note: Writing man/man3/ThreadIberr.3
Note: Writing man/man3/ThreadIbsta.3
if test `basename /usr/bin/jw` = "jw" ; then \
/usr/bin/jw -f docbook -b pdf ./linux-gpib.sgml ; \
else \
/usr/bin/jw ./linux-gpib.sgml -F sgml -P table.in.float=none -o linux-gpib.pdf ; \
fi
Using catalogs: /etc/sgml/catalog
Using stylesheet: /usr/share/docbook-utils/docbook-utils.dsl#print
Working on: /<<PKGBUILDDIR>>/doc/./linux-gpib.sgml
Done.
This is pdfTeX, Version 3.141592653-2.6-1.40.29 (TeX Live 2026/Debian) (preloaded format=pdfjadetex)
restricted \write18 enabled.
entering extended mode
(/<<PKGBUILDDIR>>/doc/./linux-gpib.tex
JadeTeX 2003/04/27: 3.13
(/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd)
Elements will be labelled
Jade begin document sequence at 20
No file linux-gpib.aux.
(/usr/share/texmf/tex/latex/tipa/t3ptm.fd)
(/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
) (/usr/share/texlive/texmf-dist/tex/latex/epstopdf-pkg/epstopdf-base.sty
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg))
! Undefined control sequence.
<argument> \c_sys_backend_str
l.20 {48\p@}}
\Node%
Package fancyhdr Warning: \fancyfoot's `E' option without twoside option is use
less.
(fancyhdr) Please consider using the `twoside' option on input l
ine 111.
Package fancyhdr Warning: \fancyhead's `E' option without twoside option is use
less.
(fancyhdr) Please consider using the `twoside' option on input l
ine 111.
(/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)
(/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1phv.fd)
(/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd)
Package fancyhdr Warning: \fancyfoot's `E' option without twoside option is use
less.
(fancyhdr) Please consider using the `twoside' option on input l
ine 551.
[1.0.4{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}{/usr/share/texlive/te
xmf-dist/fonts/enc/dvips/base/8r.enc}]
(/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd)
(/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd)
(/usr/share/texlive/texmf-dist/tex/latex/wasysym/uwasy.fd) [2.0.4] [3.0.4]
[4.0.4]
Overfull \hbox (1.99997pt too wide) in alignment at lines 1316--1394
[] [] [] []
Overfull \hbox (106.99997pt too wide) in alignment at lines 1394--2821
[] [] [] []
Package longtable Warning: Column widths have changed
(longtable) in table 1 on input line 2821.
[5.0.4] [6.0.4] [7.0.4] [8.0.4]
Package hyperref Warning: Token not allowed in a PDF string (Unicode):
(hyperref) removing `subscript' on input line 2851.
[9.0.4] [10.0.4] [11.0.4]
Overfull \hbox (1.99997pt too wide) in alignment at lines 4261--4339
[] [] [] []
Overfull \hbox (1.99997pt too wide) in alignment at lines 4339--8714
[] [] [] []
[12.0.4] [13.0.4] [14.0.4] [15.0.4]
Package hyperref Warning: Token not allowed in a PDF string (Unicode):
(hyperref) removing `subscript' on input line 9323.
Package hyperref Warning: Token not allowed in a PDF string (Unicode):
(hyperref) removing `subscript' on input line 9323.
[16.0.4] [17.0.4] [18.0.4] [19.0.4] [20.0.4]
Overfull \hbox (1.19998pt too wide) in alignment at lines 11258--11305
[] []
Overfull \hbox (1.19998pt too wide) in alignment at lines 11305--12067
[] []
[21.0.4] [22.0.4] [23.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 13260--13320
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 13320--14304
[] [] []
[24.0.4] [25.0.4]
Overfull \hbox (1.99997pt too wide) in alignment at lines 14605--14683
[] [] [] []
Overfull \hbox (1.99997pt too wide) in alignment at lines 14683--15954
[] [] [] []
[26.0.4
pdfTeX warning (ext4): destination with the same identifier (name{0:1141}) has
been already used, duplicate ignored
<argument> ...shipout:D \box_use:N \l_shipout_box
\__shipout_drop_firstpage_...
l.15954 \endTeXTable
{}%] [27.0.4] [28.0.4] [29.0.4]
Overfull \hbox (1.99997pt too wide) in alignment at lines 16378--16456
[] [] [] []
Overfull \hbox (106.99997pt too wide) in alignment at lines 16456--18768
[] [] [] []
Package longtable Warning: Column widths have changed
(longtable) in table 6 on input line 18768.
[30.0.4] [31.0.4] [32.0.4] [33.0.4] [34.0.4] [35.0.4] [36.0.4]
Overfull \hbox (1.99997pt too wide) in alignment at lines 20935--21013
[] [] [] []
Overfull \hbox (106.99997pt too wide) in alignment at lines 21013--23318
[] [] [] []
Package longtable Warning: Column widths have changed
(longtable) in table 7 on input line 23318.
[37.0.4] [38.0.4] [39.0.4] [40.0.4] [41.0.4] [42.0.4] [43.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 24094--24154
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 24154--24329
[] [] []
[44.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 25039--25099
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 25099--25331
[] [] []
[45.0.4] [46.0.4] [47.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 26762--26822
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 26822--27724
[] [] []
[48.0.4] [49.0.4] [50.0.4] [51.0.4] [52.0.4] [53.0.4] [54.0.4] [55.0.4]
[56.0.4] [57.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 32147--32207
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 32207--32398
[] [] []
[58.0.4] [59.0.4] [60.0.4] [61.0.4] [62.0.4] [63.0.4] [64.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 35342--35402
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 35402--36416
[] [] []
[65.0.4] [66.0.4] [67.0.4] [68.0.4] [69.0.4] [70.0.4] [71.0.4] [72.0.4]
[73.0.4] [74.0.4] [75.0.4] [76.0.4] [77.0.4] [78.0.4] [79.0.4] [80.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 44144--44204
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 44204--44378
[] [] []
[81.0.4] [82.0.4] [83.0.4] [84.0.4] [85.0.4] [86.0.4] [87.0.4] [88.0.4]
[89.0.4] [90.0.4]
Overfull \hbox (11.99951pt too wide) in paragraph at lines 49394--49394
[]\T1/pcr/m/n/9 addressList[ 1 ] = MakeAddr(3, 0); /* primary address 3, no se
condary address */[]
Overfull \hbox (28.1995pt too wide) in paragraph at lines 49395--49395
[]\T1/pcr/m/n/9 addressList[ 2 ] = MakeAddr(7, 0x70); /* primary address 3, se
condary address 16 */[]
Overfull \hbox (44.39948pt too wide) in paragraph at lines 49396--49396
[]\T1/pcr/m/n/9 addressList[ 3 ] = MakeAddr(20, MSA(9)); /* primary address 20
, secondary address 9 */[]
[91.0.4] [92.0.4]
Package hyperref Warning: Token not allowed in a PDF string (Unicode):
(hyperref) removing `subscript' on input line 50411.
[93.0.4
pdfTeX warning (ext4): destination with the same identifier (name{0:4048}) has
been already used, duplicate ignored
<argument> ...shipout:D \box_use:N \l_shipout_box
\__shipout_drop_firstpage_...
l.50477 {1}}
\Seq%] [94.0.4] [95.0.4
pdfTeX warning (ext4): destination with the same identifier (name{0:4127}) has
been already used, duplicate ignored
<argument> ...shipout:D \box_use:N \l_shipout_box
\__shipout_drop_firstpage_...
l.51450 {1}}
Synopsis\def\HeadingText{%]
Overfull \hbox (1.59998pt too wide) in alignment at lines 51817--51877
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 51877--52881
[] [] []
[96.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 53013--53073
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 53073--53610
[] [] []
[97.0.4] [98.0.4] [99.0.4] [100.0.4] [101.0.4] [102.0.4] [103.0.4] [104.0.4]
[105.0.4] [106.0.4]
Package longtable Warning: Table widths have changed. Rerun LaTeX.
(/<<PKGBUILDDIR>>/doc/./linux-gpib.aux)
Package rerunfilecheck Warning: File `linux-gpib.out' has changed.
(rerunfilecheck) Rerun to get outlines right
(rerunfilecheck) or use package `bookmark'.
)
(see the transcript file for additional information)</usr/share/texlive/texmf-d
ist/fonts/type1/public/amsfonts/cm/cmmi9.pfb></usr/share/texlive/texmf-dist/fon
ts/type1/urw/courier/ucrb8a.pfb></usr/share/texlive/texmf-dist/fonts/type1/urw/
courier/ucrbo8a.pfb></usr/share/texlive/texmf-dist/fonts/type1/urw/courier/ucrr
8a.pfb></usr/share/texlive/texmf-dist/fonts/type1/urw/courier/ucrro8a.pfb></usr
/share/texlive/texmf-dist/fonts/type1/urw/helvetic/uhvb8a.pfb></usr/share/texli
ve/texmf-dist/fonts/type1/urw/times/utmb8a.pfb></usr/share/texlive/texmf-dist/f
onts/type1/urw/times/utmr8a.pfb></usr/share/texlive/texmf-dist/fonts/type1/urw/
times/utmri8a.pfb>
Output written on linux-gpib.pdf (106 pages, 352063 bytes).
Transcript written on linux-gpib.log.
make[3]: *** [Makefile:750: linux-gpib.pdf] Error 9
make[3]: Leaving directory '/<<PKGBUILDDIR>>/doc'
make[2]: *** [Makefile:457: all-recursive] Error 1
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: *** [Makefile:389: all] Error 2
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_build: error: make -j2 returned exit code 2
make: *** [debian/rules:11: binary] Error 25
dpkg-buildpackage: error: debian/rules binary subprocess failed with exit status 2
--------------------------------------------------------------------------------
More information about the Pkg-electronics-devel
mailing list