[Pkg-fglrx-devel] Bug#554847: Hopefully the correct logs now.
Friedrich Delgado Friedrichs
friedel at nomaden.org
Tue Nov 24 21:54:48 UTC 2009
Ok, I have more information for you.
The most relevant part first:
The system locks up quickly after starting X. In fact it's so quickly,
that there were no changes on a filesystem that's mounted
asynchronously.
I've checked the timestamps on the created logs, and I've noticed
there were hours too early.
That means: The Xorg.0.log I sent you has nothing to do with the
lockup.
Sorry, I just noticed this today.
I'm not sure how to deal with this correctly, but I've reproduced the
bug again, after re-mounting the relevant filesystem with the 'sync'
flag, which actually resulted in some logs which are current and
related to the lockup, and I hope they are helpful.
Patrick Matthäi schrieb:
> 1) (WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
> Is the package acpid installed and the acpid daemon running? This should
> not happen.
Not the relevant log, but acpid is certainly running every time before
I start X. However it could be that at the time the log was created,
it wasn't running. I don't know when that log was created, it could be
some failed experiment. We should completely disregard it.
> 3) (II) fglrx(0): IRQ 27 Disabled.
> This may be the interrupt for your nvidia onboard card. Maybe this is
> the problem. Are you able to deactivate it in your bios?
Right now (running X with 9.8 driver) I have:
27: 76411 PCI-MSI-edge fglrx[0]@PCI:3:0:0
In /proc/interrupts.
In the Bios of my MSI K9NGM2 board I have two relevant settings:
I can set "OnChip and PCIe VGA selection" to "both" or "auto". The
manual states:
,----
Setting “Auto” to auto detect the graphics card. Or you can set to
both to enable both OnChip VGA and PCIe VGA.
`----
I chose "Auto", which lets me use the card in the PCIE slot and seems
to disable the internal card.
,----
Primary Graphics Adapter
This setting specifies which graphics card is your primary graphics
adapter.
`----
I can choose "PCI" or "PCI Expr", and I chose the latter.
The hardware overview screen in the bios still lists the nvidia card,
but linux doesn't seem to see it (see the full lspci -v listing in my
first report).
> 4) To your problem with the offical AMD installer, this is not our
> "business" and there we can not help. But you should not use it, because
> it may left files on your system which may clash with the debian version.
I just wanted to state evidence that this bug is not specific to the
debian package.
> 5) Your configuration is too bloated. Please do the following:
> # mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bak
> # aticonfig --initial --force
> This config should be enough.
Of course. See the attached type script and xorg.conf.
> 6) It would be nice if you do not forgot the startx thing and also dmesg
> after the crash would be interesting.
Ok. This hint was what pointed me at the wrong timestamps.
Let me describe the attachments:
- fglrx-crash-typescript:
The complete steps up to the crash. Also contains dmesg output
after loading the module.
Unfortunately it doesn't contain the error output of startx, I to
capture that seperately, since the 'script' couldn't save the file
before the lockup.
- interrupts-fglrx-pre-start:
Contents of /proc/interrupt. I saved
them after loading the module as well, but those two files contain
the same modules.
- startx.err.log:
stderr of startx. I also saved stdout separately, but it was empty.
- syslog-after-startx:
Parts of syslog after startx. This is basically just two additional
lines:
Nov 24 21:47:12 abrasax acpid: client connected from 4574[0:0]
Nov 24 21:47:12 abrasax acpid: 1 client rule loaded
- syslog-on-boot:
Syslog (and dmesg) contain a part that strike me as odd.
"mtrr: your BIOS has set up an incorrect mask, fixing it up."
followed by a call trace. These things happen on every boot.
- Xorg.0.log.fglrx-hang.really:
This is the real output from X this time. ;)
- xorg.conf:
For completeness, the configuration created by aticonfig --initial,
used for creating the other files.
Kind regards
Friedel
--
Friedrich Delgado Friedrichs <friedel at nomaden.org>
TauPan on Ircnet and Freenode ;)
-------------- next part --------------
Script started on Tue Nov 24 21:43:23 2009
compaudit:107: unknown group
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:~# [Kddpkg -l fglrx|grep ^ii
Binary file core matches
dpkg-deb.diff:- 2) DIR="$(pwd)/DEBIAN"; break;;
No packages found matching fglrx.
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:~# [Kllsmod|grep fglrx
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:~# [Klsmod|grep fglrx nvd idira
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:~# [Klsmod|grep nvidira a
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:~# [Kccat /proc/interrupts
CPU0
0: 49 XT-PIC-XT timer
1: 2 IO-APIC-edge i8042
4: 6 IO-APIC-edge
6: 5 IO-APIC-edge floppy
7: 1 IO-APIC-edge
8: 0 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 4 IO-APIC-edge i8042
14: 0 IO-APIC-edge ide0
15: 1100 IO-APIC-edge ide1
17: 33 IO-APIC-fasteoi HDA Intel
18: 5 IO-APIC-fasteoi bttv0
19: 4 IO-APIC-fasteoi firewire_ohci
20: 370 IO-APIC-fasteoi eth0
21: 9167 IO-APIC-fasteoi ohci_hcd:usb2
22: 24146 IO-APIC-fasteoi sata_nv, HDA Intel
23: 2650 IO-APIC-fasteoi ehci_hcd:usb1, sata_nv
NMI: 0 Non-maskable interrupts
LOC: 23965 Local timer interrupts
SPU: 0 Spurious interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
ERR: 1
MIS: 0
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:~# [Kaaptitudein install fglrx-amdcccle fglrx-atieventsd fglrx-driver fg
[Kl
lrx-glx fglrx-source fglrx-modules-dkmsfglrx-amdcccle fglrx-atieventsd fglrx-dri
[Kv
ver fglrx-glx fglrx-source fglrx-modules-dkms
v
[2G
[K[A[80G[K
[K[A[80G
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:~# [Kaaptitude install fglrx-amdcccle fglrx-atieventsd fglrx-driver fg
[Kl
lrx-glx fglrx-source fglrx-modules-dkms
Reading package lists... 0%
Reading package lists... 100%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 1%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree
Reading state information... 0%
Reading state information... 0%
Reading state information... Done
Reading extended state information... 0%
Reading extended state information... 0%
Reading extended state information
Initializing package states... 0%
Initializing package states... Done
Reading task descriptions... 0%
Reading task descriptions... 0%
Reading task descriptions... Done
The following NEW packages will be installed:
dkms{a} fglrx-amdcccle fglrx-atieventsd fglrx-control{a} fglrx-driver
fglrx-glx fglrx-glx-ia32{a} fglrx-modules-dkms fglrx-source
0 packages upgraded, 9 newly installed, 0 to remove and 99 not upgraded.
Need to get 0B/31.8MB of archives. After unpacking 95.7MB will be used.
Do you want to continue? [Y/n/?] y
Writing extended state information... 0%
Writing extended state information... 1%
Writing extended state information... Done
Reading package fields... 0%
Reading package fields... 11%
Reading package fields... 22%
Reading package fields... 33%
Reading package fields... 44%
Reading package fields... 55%
Reading package fields... 66%
Reading package fields... 77%
Reading package fields... 88%
Reading package fields... Done
Reading package status... 0%
Reading package status... 0%
Reading package status... 11%
Reading package status... 22%
Reading package status... 33%
Reading package status... 44%
Reading package status... 55%
Reading package status... Done
Retrieving bug reports... 0%
Retrieving bug reports... 100%
Retrieving bug reports... Done
Parsing Found/Fixed information... 0%
Parsing Found/Fixed information... 0%
Parsing Found/Fixed information... 14%
Parsing Found/Fixed information... 28%
Parsing Found/Fixed information... 42%
Parsing Found/Fixed information... 57%
Parsing Found/Fixed information... 71%
Parsing Found/Fixed information... 85%
Parsing Found/Fixed information... 100%
Parsing Found/Fixed information... Done
Preconfiguring packages ...
Selecting previously deselected package fglrx-glx.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 327983 files and directories currently installed.)
Unpacking fglrx-glx (from .../fglrx-glx_1%3a9-10-1_amd64.deb) ...
Adding `diversion of /usr/lib/libGL.so.1.2 to /usr/lib/fglrx/diversions/libGL.so.1.2 by fglrx-glx'
Adding `diversion of /usr/lib/libGL.so.1 to /usr/lib/fglrx/diversions/libGL.so.1 by fglrx-glx'
Selecting previously deselected package fglrx-driver.
Unpacking fglrx-driver (from .../fglrx-driver_1%3a9-10-1_amd64.deb) ...
Adding `diversion of /usr/lib/xorg/modules/extensions/libdri.so to /usr/lib/fglrx/diversions/libdri.so by fglrx-driver'
Adding `diversion of /usr/lib/xorg/modules/extensions/libglx.so to /usr/lib/fglrx/diversions/libglx.so by fglrx-driver'
Selecting previously deselected package fglrx-glx-ia32.
Unpacking fglrx-glx-ia32 (from .../fglrx-glx-ia32_1%3a9-10-1_amd64.deb) ...
Adding `diversion of /usr/lib32/libGL.so.1.2 to /usr/lib32/fglrx/diversions/libGL.so.1.2 by fglrx-glx-ia32'
Adding `diversion of /usr/lib32/libGL.so.1 to /usr/lib32/fglrx/diversions/libGL.so.1 by fglrx-glx-ia32'
Selecting previously deselected package dkms.
Unpacking dkms (from .../dkms_2.1.0.1-2_all.deb) ...
Selecting previously deselected package fglrx-control.
Unpacking fglrx-control (from .../fglrx-control_1%3a9-10-1_amd64.deb) ...
Selecting previously deselected package fglrx-amdcccle.
Unpacking fglrx-amdcccle (from .../fglrx-amdcccle_1%3a9-10-1_all.deb) ...
Selecting previously deselected package fglrx-atieventsd.
Unpacking fglrx-atieventsd (from .../fglrx-atieventsd_1%3a9-10-1_amd64.deb) ...
Selecting previously deselected package fglrx-modules-dkms.
Unpacking fglrx-modules-dkms (from .../fglrx-modules-dkms_1%3a9-10-3_amd64.deb) ...
Selecting previously deselected package fglrx-source.
Unpacking fglrx-source (from .../fglrx-source_1%3a9-10-1_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for doc-base ...
Processing 1 added doc-base file(s)...
Registering documents with dhelp...
Registering documents with scrollkeeper...
Processing triggers for desktop-file-utils ...
Processing triggers for menu ...
Setting up fglrx-driver (1:9-10-1) ...
Installing new version of config file /etc/ati/control ...
Installing new version of config file /etc/ati/atiogl.xml ...
Installing new version of config file /etc/ati/signature ...
Installing new version of config file /etc/ati/amdpcsdb.default ...
Setting up fglrx-glx (1:9-10-1) ...
Setting up fglrx-glx-ia32 (1:9-10-1) ...
Setting up dkms (2.1.0.1-2) ...
insserv: warning: current stop runlevel(s) (1) of script `nvidia-kernel' overwrites defaults (empty).
Running DKMS auto installation service for kernel 2.6.30-2-amd64:.
Setting up fglrx-control (1:9-10-1) ...
Setting up fglrx-amdcccle (1:9-10-1) ...
Setting up fglrx-atieventsd (1:9-10-1) ...
insserv: warning: current stop runlevel(s) (1) of script `nvidia-kernel' overwrites defaults (empty).
Starting atieventsd: done.
Setting up fglrx-modules-dkms (1:9-10-3) ...
Creating symlink /var/lib/dkms/fglrx/9-10/source ->
/usr/src/fglrx-9-10
DKMS: add Completed.
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area...
pushd /var/lib/dkms/fglrx/9-10/build; sh make.sh --nohints --norootcheck; popd......
cleaning build area...
DKMS: build Completed.
fglrx.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.30-2-amd64/updates/dkms/
depmod.....
DKMS: install Completed.
Setting up fglrx-source (1:9-10-1) ...
Processing triggers for menu ...
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree
Reading state information... 0%
Reading state information... 0%
Reading state information... Done
Reading extended state information... 0%
Reading extended state information... 0%
Reading extended state information
Initializing package states... 0%
Initializing package states... Done
Writing extended state information... 0%
Writing extended state information... Done
Reading task descriptions... 0%
Reading task descriptions... 0%
Reading task descriptions... Done
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:~# [Kccd /etc/X11/
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:/etc/X11# [Kmmv xorg.conf xorg.conf.bak
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:/etc/X11# [Kaaticonfig rrehash
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:/etc/X11# [Kaaticonfig --inis tial
Could not find configuration file, so create an empty one
Uninitialised file found, configuring.
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.original-9
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:/etc/X11# [Kmmount
/dev/mapper/lvm-root on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/sda1 on /boot type ext3 (rw)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:/etc/X11# [Kmmount /D -o remount,sync /de
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:/etc/X11# [Kmmount -o remount,sync mmount
/dev/mapper/lvm-root on / type ext3 (rw,sync,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/sda1 on /boot type ext3 (rw)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:/etc/X11# [Kllsmod|grep fglrx
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:/etc/X11# [Kmmodprobe fglrx
WARNING: All config files need .conf: /etc/modprobe.d/alsa-midiman, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/alsa-oss, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/atarisio, it will be ignored in a future release.
[1m[7m#[27m[1m[0m
[0m[27m[24m[Jroot at abrasax:/etc/X11# [Kddmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-2-amd64 (Debian 2.6.30-8) (waldi at debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Fri Sep 25 22:16:56 UTC 2009
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.30-2-amd64 root=/dev/mapper/lvm-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000005ffc0000 - 000000005ffce000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005ffce000 - 000000005fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x5ffc0 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 base 00000FC000 mask 0FFFFFC000 write-protect
[ 0.000000] 5 base 00000DC000 mask 0FFFFFE000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /home/blank/debian/kernel/release/linux-2.6/linux-2.6-2.6.30/debian/build/source_amd64_none/arch/x86/kernel/cpu/mtrr/generic.c:456 generic_get_mtrr+0xbf/0xf9()
[ 0.000000] Hardware name: MS-7252
[ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up.
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-2-amd64 #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8021dadb>] ? generic_get_mtrr+0xbf/0xf9
[ 0.000000] [<ffffffff8021dadb>] ? generic_get_mtrr+0xbf/0xf9
[ 0.000000] [<ffffffff80242373>] ? warn_slowpath_common+0x77/0xa3
[ 0.000000] [<ffffffff802423fb>] ? warn_slowpath_fmt+0x51/0x59
[ 0.000000] [<ffffffff804b5a23>] ? _spin_unlock_irqrestore+0xd/0xe
[ 0.000000] [<ffffffff8021dbe7>] ? mtrr_wrmsr+0x1c/0x49
[ 0.000000] [<ffffffff8021ddec>] ? get_fixed_ranges+0x71/0x98
[ 0.000000] [<ffffffff8021dbe7>] ? mtrr_wrmsr+0x1c/0x49
[ 0.000000] [<ffffffff8021dcab>] ? prepare_set+0x97/0x9d
[ 0.000000] [<ffffffff8021dd04>] ? post_set+0x53/0x60
[ 0.000000] [<ffffffff80655f8b>] ? get_mtrr_state+0x2eb/0x2f6
[ 0.000000] [<ffffffff8021dadb>] ? generic_get_mtrr+0xbf/0xf9
[ 0.000000] [<ffffffff804b3a4c>] ? printk+0x4e/0x5a
[ 0.000000] [<ffffffff80656b61>] ? mtrr_trim_uncached_memory+0x91/0x311
[ 0.000000] [<ffffffff80655afb>] ? mtrr_bp_init+0x1b0/0x1d3
[ 0.000000] [<ffffffff8065fc35>] ? early_gart_iommu_check+0x9b/0x287
[ 0.000000] [<ffffffff80652870>] ? setup_arch+0x41f/0x95b
[ 0.000000] [<ffffffff8066776a>] ? cgroup_init_subsys+0x10d/0x116
[ 0.000000] [<ffffffff8064e140>] ? early_idt_handler+0x0/0x71
[ 0.000000] [<ffffffff8064e96b>] ? start_kernel+0x83/0x386
[ 0.000000] [<ffffffff8064e3b7>] ? x86_64_start_kernel+0xf9/0x106
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] init_memory_mapping: 0000000000000000-000000005ffc0000
[ 0.000000] 0000000000 - 005fe00000 page 2M
[ 0.000000] 005fe00000 - 005ffc0000 page 4k
[ 0.000000] kernel direct mapping tables up to 5ffc0000 @ 10000-14000
[ 0.000000] RAMDISK: 375f6000 - 37fef4e2
[ 0.000000] ACPI: RSDP 00000000000f8ae0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000005ffc0000 00038 (v01 A M I OEMRSDT 04000818 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000005ffc0200 00084 (v02 A M I OEMFACP 04000818 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000005ffc0440 048DD (v01 1ADIF 1ADIF006 00000006 INTL 20051117)
[ 0.000000] ACPI: FACS 000000005ffce000 00040
[ 0.000000] ACPI: APIC 000000005ffc0390 00068 (v01 A M I OEMAPIC 04000818 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000005ffc0400 0003C (v01 A M I OEMMCFG 04000818 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000005ffce040 00060 (v01 A M I AMI_OEM 04000818 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000005ffc4d20 00136 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000005ffc0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000005ffc0000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000025ff7] pages c
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 005ffc0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007ddb0c] TEXT DATA BSS ==> [0000200000 - 00007ddb0c]
[ 0.000000] #3 [00375f6000 - 0037fef4e2] RAMDISK ==> [00375f6000 - 0037fef4e2]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00007de000 - 00007de1a5] BRK ==> [00007de000 - 00007de1a5]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe200015fffff] PMD -> [ffff880001200000-ffff8800027fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005ffc0
[ 0.000000] On node 0 totalpages: 393039
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1602 pages reserved
[ 0.000000] DMA zone: 2325 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5320 pages used for memmap
[ 0.000000] DMA32 zone: 383736 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880001010000, static data 76256 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386061
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.30-2-amd64 root=/dev/mapper/lvm-root ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2394.304 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 4410000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] Memory: 1533124k/1572608k available (2784k kernel code, 452k absent, 39032k reserved, 1411k data, 560k init)
[ 0.004095] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.60 BogoMIPS (lpj=9577216)
[ 0.004303] Security Framework initialized
[ 0.004311] SELinux: Disabled at boot.
[ 0.004665] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008200] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.009986] Mount-cache hash table entries: 256
[ 0.010343] Initializing cgroup subsys ns
[ 0.010347] Initializing cgroup subsys cpuacct
[ 0.010350] Initializing cgroup subsys devices
[ 0.010354] Initializing cgroup subsys freezer
[ 0.010356] Initializing cgroup subsys net_cls
[ 0.010474] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.010476] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.010479] CPU 0/0x0 -> Node 0
[ 0.010480] tseg: 0000000000
[ 0.010504] using C1E aware idle routine
[ 0.010516] SMP alternatives: switching to UP code
[ 0.018019] Freeing SMP alternatives: 26k freed
[ 0.018035] ACPI: Core revision 20090320
[ 0.031635] Setting APIC routing to flat
[ 0.032001] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.036001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.036001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.036001] ..... (found apic 0 pin 0) ...
[ 0.044001] ....... failed.
[ 0.044001] ...trying to set up timer as Virtual Wire IRQ...
[ 0.044001] ..... failed.
[ 0.044001] ...trying to set up timer as ExtINT IRQ...
[ 0.084551] ..... works.
[ 0.084553] CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02
[ 0.088001] Brought up 1 CPUs
[ 0.088001] Total of 1 processors activated (4788.60 BogoMIPS).
[ 0.088001] CPU0 attaching NULL sched-domain.
[ 0.088001] net_namespace: 1936 bytes
[ 0.088001] Booting paravirtualized kernel on bare hardware
[ 0.088001] regulator: core version 0.5
[ 0.088001] NET: Registered protocol family 16
[ 0.088001] node 0 link 0: io port [1000, ffffff]
[ 0.088001] TOM: 0000000060000000 aka 1536M
[ 0.088001] node 0 link 0: mmio [e0000000, efffffff]
[ 0.088001] node 0 link 0: mmio [a0000, bffff]
[ 0.088001] node 0 link 0: mmio [60000000, fe0bffff]
[ 0.088001] bus: [00,ff] on node 0 link 0
[ 0.088001] bus: 00 index 0 io port: [0, ffff]
[ 0.088001] bus: 00 index 1 mmio: [60000000, fcffffffff]
[ 0.088001] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.088001] ACPI: bus type pci registered
[ 0.088001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.088001] PCI: Not using MMCONFIG.
[ 0.088001] PCI: Using configuration type 1 for base access
[ 0.088001] bio: create slab <bio-0> at 0
[ 0.088001] ACPI: EC: Look up EC in DSDT
[ 0.095939] ACPI: Interpreter enabled
[ 0.095943] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.095966] ACPI: Using IOAPIC for interrupt routing
[ 0.096001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.101525] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.109098] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.119383] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 8A, should be 81 [20090320]
[ 0.119516] ACPI: No dock devices found.
[ 0.119743] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.119985] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119988] pci 0000:00:02.0: PME# disabled
[ 0.120001] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120001] pci 0000:00:03.0: PME# disabled
[ 0.120058] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120061] pci 0000:00:04.0: PME# disabled
[ 0.120240] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.120279] pci 0000:00:0a.1: reg 20 io port: [0x5000-0x503f]
[ 0.120285] pci 0000:00:0a.1: reg 24 io port: [0x6000-0x603f]
[ 0.120306] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.120311] pci 0000:00:0a.1: PME# disabled
[ 0.120340] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe9be000-0xfe9befff]
[ 0.120364] pci 0000:00:0b.0: supports D1 D2
[ 0.120366] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120369] pci 0000:00:0b.0: PME# disabled
[ 0.120392] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe9bfc00-0xfe9bfcff]
[ 0.120416] pci 0000:00:0b.1: supports D1 D2
[ 0.120418] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120421] pci 0000:00:0b.1: PME# disabled
[ 0.120453] pci 0000:00:0d.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.120487] pci 0000:00:0e.0: reg 10 io port: [0xc800-0xc807]
[ 0.120492] pci 0000:00:0e.0: reg 14 io port: [0xc480-0xc483]
[ 0.120496] pci 0000:00:0e.0: reg 18 io port: [0xc400-0xc407]
[ 0.120500] pci 0000:00:0e.0: reg 1c io port: [0xc080-0xc083]
[ 0.120504] pci 0000:00:0e.0: reg 20 io port: [0xc000-0xc00f]
[ 0.120509] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe9bd000-0xfe9bdfff]
[ 0.120547] pci 0000:00:0f.0: reg 10 io port: [0xbc00-0xbc07]
[ 0.120551] pci 0000:00:0f.0: reg 14 io port: [0xb880-0xb883]
[ 0.120555] pci 0000:00:0f.0: reg 18 io port: [0xb800-0xb807]
[ 0.120560] pci 0000:00:0f.0: reg 1c io port: [0xb480-0xb483]
[ 0.120564] pci 0000:00:0f.0: reg 20 io port: [0xb400-0xb40f]
[ 0.120568] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe9bc000-0xfe9bcfff]
[ 0.120637] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe9b8000-0xfe9bbfff]
[ 0.120664] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.120668] pci 0000:00:10.1: PME# disabled
[ 0.120696] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe9b7000-0xfe9b7fff]
[ 0.120700] pci 0000:00:14.0: reg 14 io port: [0xb080-0xb087]
[ 0.120719] pci 0000:00:14.0: supports D1 D2
[ 0.120721] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120724] pci 0000:00:14.0: PME# disabled
[ 0.120872] pci 0000:03:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.120878] pci 0000:03:00.0: reg 18 64bit mmio: [0xfeae0000-0xfeaeffff]
[ 0.120883] pci 0000:03:00.0: reg 20 io port: [0xd000-0xd0ff]
[ 0.120890] pci 0000:03:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
[ 0.120902] pci 0000:03:00.0: supports D1 D2
[ 0.120926] pci 0000:03:00.1: reg 10 64bit mmio: [0xfeafc000-0xfeafffff]
[ 0.120949] pci 0000:03:00.1: supports D1 D2
[ 0.120986] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff]
[ 0.120989] pci 0000:00:04.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.120993] pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.121018] pci 0000:04:07.0: reg 10 32bit mmio: [0xfdfff000-0xfdffffff]
[ 0.121062] pci 0000:04:08.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.121068] pci 0000:04:08.0: reg 14 io port: [0xec00-0xec7f]
[ 0.121098] pci 0000:04:08.0: supports D2
[ 0.121100] pci 0000:04:08.0: PME# supported from D2 D3hot D3cold
[ 0.121104] pci 0000:04:08.0: PME# disabled
[ 0.121128] pci 0000:00:10.0: transparent bridge
[ 0.121131] pci 0000:00:10.0: bridge io port: [0xe000-0xefff]
[ 0.121134] pci 0000:00:10.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.121137] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.121150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.121335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.121398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.121459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.121541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.133261] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
[ 0.133477] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.133691] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.133904] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
[ 0.134116] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
[ 0.134329] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *11
[ 0.134542] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.134754] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.134967] ACPI: PCI Interrupt Link [LUB0] (IRQs 21) *10
[ 0.135179] ACPI: PCI Interrupt Link [LUB2] (IRQs 23) *7
[ 0.135390] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
[ 0.135611] ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *11
[ 0.135824] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.136038] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.136252] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
[ 0.136470] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 0.136688] ACPI: PCI Interrupt Link [LSA0] (IRQs 22) *7
[ 0.136899] ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *7
[ 0.137150] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.137369] usbcore: registered new interface driver usbfs
[ 0.137423] usbcore: registered new interface driver hub
[ 0.137461] usbcore: registered new device driver usb
[ 0.137595] PCI: Using ACPI for IRQ routing
[ 0.138072] pnp: PnP ACPI init
[ 0.138080] ACPI: bus type pnp registered
[ 0.143885] pnp: PnP ACPI: found 15 devices
[ 0.143888] ACPI: ACPI bus type pnp unregistered
[ 0.143901] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.143907] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.143910] system 00:08: ioport range 0x800-0x80f has been reserved
[ 0.143914] system 00:08: ioport range 0x4000-0x407f has been reserved
[ 0.143917] system 00:08: ioport range 0x4080-0x40ff has been reserved
[ 0.143920] system 00:08: ioport range 0x4400-0x447f has been reserved
[ 0.143923] system 00:08: ioport range 0x4480-0x44ff has been reserved
[ 0.143926] system 00:08: ioport range 0x4800-0x487f has been reserved
[ 0.143929] system 00:08: ioport range 0x4880-0x48ff has been reserved
[ 0.143931] system 00:08: ioport range 0x2000-0x207f has been reserved
[ 0.143935] system 00:08: ioport range 0x2080-0x20ff has been reserved
[ 0.143938] system 00:08: iomem range 0xfe9c0000-0xfe9fffff has been reserved
[ 0.143941] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.143944] system 00:08: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.143950] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.143953] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.143958] system 00:0c: ioport range 0xa00-0xa0f has been reserved
[ 0.143961] system 00:0c: ioport range 0xa10-0xa1f has been reserved
[ 0.143966] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.143972] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.143975] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.143978] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.143981] system 00:0e: iomem range 0x100000-0x5fffffff could not be reserved
[ 0.143984] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.148888] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.148891] pci 0000:00:02.0: IO window: disabled
[ 0.148893] pci 0000:00:02.0: MEM window: disabled
[ 0.148896] pci 0000:00:02.0: PREFETCH window: disabled
[ 0.148899] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.148901] pci 0000:00:03.0: IO window: disabled
[ 0.148903] pci 0000:00:03.0: MEM window: disabled
[ 0.148905] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.148909] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 0.148911] pci 0000:00:04.0: IO window: 0xd000-0xdfff
[ 0.148914] pci 0000:00:04.0: MEM window: 0xfea00000-0xfeafffff
[ 0.148917] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.148921] pci 0000:00:10.0: PCI bridge, secondary bus 0000:04
[ 0.148924] pci 0000:00:10.0: IO window: 0xe000-0xefff
[ 0.148927] pci 0000:00:10.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.148930] pci 0000:00:10.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.148940] pci 0000:00:02.0: setting latency timer to 64
[ 0.148944] pci 0000:00:03.0: setting latency timer to 64
[ 0.148948] pci 0000:00:04.0: setting latency timer to 64
[ 0.148951] pci 0000:00:10.0: setting latency timer to 64
[ 0.148956] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.148958] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.148961] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.148964] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.148966] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.148969] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.148971] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.148974] pci_bus 0000:04: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.148976] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.148979] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.149066] NET: Registered protocol family 2
[ 0.149202] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.150228] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.153719] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.154555] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.154558] TCP reno registered
[ 0.154703] NET: Registered protocol family 1
[ 0.154757] Trying to unpack rootfs image as initramfs...
[ 0.389181] Freeing initrd memory: 10213k freed
[ 0.398505] audit: initializing netlink socket (disabled)
[ 0.398519] type=2000 audit(1259095269.397:1): initialized
[ 0.398744] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.398859] VFS: Disk quotas dquot_6.5.2
[ 0.398894] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.398952] msgmni has been set to 3014
[ 0.399089] alg: No test for stdrng (krng)
[ 0.399149] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.399152] io scheduler noop registered
[ 0.399154] io scheduler anticipatory registered
[ 0.399156] io scheduler deadline registered
[ 0.399179] io scheduler cfq registered (default)
[ 0.399221] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.399239] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.399258] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.836928] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.836976] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.837025] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.837077] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.837090] pci 0000:03:00.0: Boot video device
[ 0.837274] alloc irq_desc for 24 on cpu 0 node 0
[ 0.837277] alloc kstat_irqs on cpu 0 node 0
[ 0.837285] pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.837291] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.837409] alloc irq_desc for 25 on cpu 0 node 0
[ 0.837411] alloc kstat_irqs on cpu 0 node 0
[ 0.837415] pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X
[ 0.837420] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 0.837526] alloc irq_desc for 26 on cpu 0 node 0
[ 0.837528] alloc kstat_irqs on cpu 0 node 0
[ 0.837533] pcieport-driver 0000:00:04.0: irq 26 for MSI/MSI-X
[ 0.837538] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 0.840352] Linux agpgart interface v0.103
[ 0.840356] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.840493] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.840850] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.842346] brd: module loaded
[ 0.842422] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.842618] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.845482] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.845487] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.846126] mice: PS/2 mouse device common for all mice
[ 0.846185] rtc_cmos 00:02: RTC can wake from S4
[ 0.846256] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.846291] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.846321] cpuidle: using governor ladder
[ 0.846323] cpuidle: using governor menu
[ 0.846328] No iBFT detected.
[ 0.846641] TCP cubic registered
[ 0.846711] NET: Registered protocol family 10
[ 0.847135] lo: Disabled Privacy Extensions
[ 0.847390] Mobile IPv6
[ 0.847392] NET: Registered protocol family 17
[ 0.847540] registered taskstats version 1
[ 0.867579] rtc_cmos 00:02: setting system clock to 2009-11-24 20:41:11 UTC (1259095271)
[ 0.867632] Freeing unused kernel memory: 560k freed
[ 0.867949] Write protecting the kernel read-only data: 3808k
[ 0.966421] ACPI Warning (nspredef-0949): \_TZ_.THRM._TZD: Return Package type mismatch at index 0 - found Processor, expected Reference [20090320]
[ 0.966430] ACPI: Expecting a [Reference] package element, found type C
[ 0.966648] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.966656] ACPI: Thermal Zone [THRM] (80 C)
[ 1.010022] Floppy drive(s): fd0 is 1.44M
[ 1.035142] SCSI subsystem initialized
[ 1.038862] FDC 0 is a post-1991 82077
[ 1.051327] Uniform Multi-Platform E-IDE driver
[ 1.056301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.056700] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 1.056705] alloc irq_desc for 23 on cpu 0 node 0
[ 1.056707] alloc kstat_irqs on cpu 0 node 0
[ 1.056719] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 1.056734] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 1.056737] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 1.056827] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 1.056855] ehci_hcd 0000:00:0b.1: debug port 1
[ 1.056859] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 1.056881] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfe9bfc00
[ 1.066539] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 1.066582] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.066585] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.066587] usb usb1: Product: EHCI Host Controller
[ 1.066589] usb usb1: Manufacturer: Linux 2.6.30-2-amd64 ehci_hcd
[ 1.066591] usb usb1: SerialNumber: 0000:00:0b.1
[ 1.066662] usb usb1: configuration #1 chosen from 1 choice
[ 1.066692] hub 1-0:1.0: USB hub found
[ 1.066702] hub 1-0:1.0: 8 ports detected
[ 1.073391] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.073792] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 1.073797] alloc irq_desc for 21 on cpu 0 node 0
[ 1.073799] alloc kstat_irqs on cpu 0 node 0
[ 1.073811] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[ 1.073828] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 1.073830] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 1.073910] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 1.073944] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfe9be000
[ 1.078559] Switched to high resolution mode on CPU 0
[ 1.082239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.082244] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.082246] usb usb2: Product: OHCI Host Controller
[ 1.082248] usb usb2: Manufacturer: Linux 2.6.30-2-amd64 ohci_hcd
[ 1.082250] usb usb2: SerialNumber: 0000:00:0b.0
[ 1.082329] usb usb2: configuration #1 chosen from 1 choice
[ 1.082357] hub 2-0:1.0: USB hub found
[ 1.082367] hub 2-0:1.0: 8 ports detected
[ 1.086979] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.087322] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 1.087327] alloc irq_desc for 20 on cpu 0 node 0
[ 1.087329] alloc kstat_irqs on cpu 0 node 0
[ 1.087341] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 1.087345] forcedeth 0000:00:14.0: setting latency timer to 64
[ 1.087408] nv_probe: set workaround bit for reversed mac addr
[ 1.178449] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 1.178456] alloc irq_desc for 19 on cpu 0 node 0
[ 1.178458] alloc kstat_irqs on cpu 0 node 0
[ 1.178471] firewire_ohci 0000:04:08.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 1.193411] libata version 3.00 loaded.
[ 1.248061] firewire_ohci: Added fw-ohci device 0000:04:08.0, OHCI version 1.10
[ 1.292123] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.425703] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 1.425706] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.425708] usb 1-2: Product: USB2.0 Hub
[ 1.425777] usb 1-2: configuration #1 chosen from 1 choice
[ 1.425989] hub 1-2:1.0: USB hub found
[ 1.426340] hub 1-2:1.0: 4 ports detected
[ 1.536085] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 1.605831] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 66:77:44:22:33:11
[ 1.605834] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 1.606604] amd74xx 0000:00:0d.0: UDMA133 controller
[ 1.606608] amd74xx 0000:00:0d.0: IDE controller (0x10de:0x0265 rev 0xa1)
[ 1.606642] amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later
[ 1.606647] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.606651] ide1: BM-DMA at 0xffa8-0xffaf
[ 1.606655] Probing IDE interface ide0...
[ 1.668512] usb 1-3: New USB device found, idVendor=0409, idProduct=005a
[ 1.668515] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.668591] usb 1-3: configuration #1 chosen from 1 choice
[ 1.668689] hub 1-3:1.0: USB hub found
[ 1.668763] hub 1-3:1.0: 2 ports detected
[ 1.748218] firewire_core: created device fw0: GUID 88aa99bbddee7766, S400
[ 2.084091] usb 2-4: new full speed USB device using ohci_hcd and address 2
[ 2.172038] Probing IDE interface ide1...
[ 2.302701] usb 2-4: New USB device found, idVendor=0403, idProduct=6001
[ 2.302703] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.302706] usb 2-4: Product: usb serial converter
[ 2.302707] usb 2-4: Manufacturer: ftdi
[ 2.302709] usb 2-4: SerialNumber: ftDD6XRV
[ 2.302773] usb 2-4: configuration #1 chosen from 1 choice
[ 2.384348] usb 1-2.2: new full speed USB device using ehci_hcd and address 5
[ 2.479873] usb 1-2.2: New USB device found, idVendor=0c4b, idProduct=0300
[ 2.479876] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.479879] usb 1-2.2: Product: cyberJack pinpad(a)
[ 2.479880] usb 1-2.2: Manufacturer: Reiner-SCT
[ 2.479882] usb 1-2.2: SerialNumber: 3653657864
[ 2.479962] usb 1-2.2: configuration #1 chosen from 1 choice
[ 2.552514] usb 1-2.3: new high speed USB device using ehci_hcd and address 6
[ 2.646150] usb 1-2.3: New USB device found, idVendor=05e3, idProduct=0608
[ 2.646153] usb 1-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.646155] usb 1-2.3: Product: USB2.0 Hub
[ 2.646233] usb 1-2.3: configuration #1 chosen from 1 choice
[ 2.646575] hub 1-2.3:1.0: USB hub found
[ 2.646912] hub 1-2.3:1.0: 4 ports detected
[ 2.736664] usb 1-3.1: new low speed USB device using ehci_hcd and address 7
[ 2.849056] usb 1-3.1: New USB device found, idVendor=045e, idProduct=0047
[ 2.849058] usb 1-3.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.849061] usb 1-3.1: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.849063] usb 1-3.1: Manufacturer: Microsoft
[ 2.849139] usb 1-3.1: configuration #1 chosen from 1 choice
[ 2.859108] usbcore: registered new interface driver hiddev
[ 2.861303] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:0b.1/usb1/1-3/1-3.1/1-3.1:1.0/input/input1
[ 2.861364] generic-usb 0003:045E:0047.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:0b.1-3.1/input0
[ 2.861382] usbcore: registered new interface driver usbhid
[ 2.861385] usbhid: v2.6:USB HID core driver
[ 2.925093] usb 1-2.3.1: new full speed USB device using ehci_hcd and address 8
[ 3.022004] usb 1-2.3.1: New USB device found, idVendor=0619, idProduct=0501
[ 3.022007] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.022010] usb 1-2.3.1: Product: SII Smart Label Printer 440
[ 3.022011] usb 1-2.3.1: Manufacturer: Seiko Instruments Inc.
[ 3.022013] usb 1-2.3.1: SerialNumber: 7BA00272
[ 3.022096] usb 1-2.3.1: configuration #1 chosen from 1 choice
[ 3.093262] usb 1-2.3.2: new low speed USB device using ehci_hcd and address 9
[ 3.188036] usb 1-2.3.2: New USB device found, idVendor=046a, idProduct=0011
[ 3.188038] usb 1-2.3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.188120] usb 1-2.3.2: configuration #1 chosen from 1 choice
[ 3.191632] input: HID 046a:0011 as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3.2/1-2.3.2:1.0/input/input2
[ 3.191690] generic-usb 0003:046A:0011.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:0b.1-2.3.2/input0
[ 3.244119] hdd: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
[ 3.244166] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.244906] hdd: UDMA/33 mode selected
[ 3.245402] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.245465] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.250335] sata_nv 0000:00:0e.0: version 3.5
[ 3.250676] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[ 3.250681] alloc irq_desc for 22 on cpu 0 node 0
[ 3.250683] alloc kstat_irqs on cpu 0 node 0
[ 3.250695] sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
[ 3.250698] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 3.250757] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 3.250898] scsi0 : sata_nv
[ 3.251074] scsi1 : sata_nv
[ 3.251230] ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 22
[ 3.251233] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 22
[ 3.251606] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 3.251610] sata_nv 0000:00:0f.0: PCI INT A -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 3.251612] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 3.251675] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 3.251851] scsi2 : sata_nv
[ 3.251968] scsi3 : sata_nv
[ 3.252170] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 23
[ 3.252173] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 23
[ 4.128366] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.132049] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.136425] ata1.00: ATA-8: Hitachi HDT721010SLA360, ST6OA3AA, max UDMA/133
[ 4.136428] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.152381] ata1.00: configured for UDMA/133
[ 4.152481] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
[ 4.160301] ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
[ 4.160304] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.168285] ata3.00: configured for UDMA/133
[ 5.032195] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.040267] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
[ 5.040269] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.048307] ata2.00: configured for UDMA/133
[ 5.048366] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 5.048557] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 5.782423] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.788531] ide-cd driver 5.00
[ 5.793913] Driver 'sd' needs updating - please use bus_type methods
[ 5.794445] ide-cd: hdd: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 5.794450] Uniform CD-ROM driver Revision: 3.20
[ 5.794677] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 5.794690] sd 0:0:0:0: [sda] Write Protect is off
[ 5.794693] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.794710] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.794796] sda:<5>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 5.794899] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.794901] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.794918] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.794982] sdb:<5>sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 5.795055] sd 2:0:0:0: [sdc] Write Protect is off
[ 5.795057] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.795073] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.795132] sdc: sdb1
[ 5.797946] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.801412] sda1 sda2
[ 5.801507] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.823341] sdc1
[ 5.823422] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 6.014768] device-mapper: uevent: version 1.0.3
[ 6.015073] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel at redhat.com
[ 6.197085] PM: Starting manual resume from disk
[ 6.272334] kjournald starting. Commit interval 5 seconds
[ 6.272345] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.672572] udev: starting version 146
[ 9.058423] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 9.058431] ACPI: Power Button [PWRF]
[ 9.058515] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 9.058519] ACPI: Power Button [PWRB]
[ 9.090650] processor ACPI_CPU:00: registered as cooling_device0
[ 9.091473] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.096145] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 9.150512] usbcore: registered new interface driver usbserial
[ 9.150529] USB Serial support registered for generic
[ 9.150987] usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x0619 pid 0x0501
[ 9.151007] usbcore: registered new interface driver usblp
[ 9.156939] usbcore: registered new interface driver usbserial_generic
[ 9.156943] usbserial: USB Serial Driver core
[ 9.161928] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 9.161946] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[ 9.184305] USB Serial support registered for FTDI USB Serial Device
[ 9.184343] ftdi_sio 2-4:1.0: FTDI USB Serial Device converter detected
[ 9.184371] usb 2-4: Detected FT232BM
[ 9.184427] usb 2-4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 9.184465] usbcore: registered new interface driver ftdi_sio
[ 9.184468] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[ 9.303146] Linux video capture interface: v2.00
[ 9.386543] bttv: driver version 0.9.18 loaded
[ 9.386546] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 9.389320] bttv: Bt8xx card found (0).
[ 9.389724] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
[ 9.389730] alloc irq_desc for 18 on cpu 0 node 0
[ 9.389732] alloc kstat_irqs on cpu 0 node 0
[ 9.389743] bttv 0000:04:07.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
[ 9.389752] bttv0: Bt848 (rev 17) at 0000:04:07.0, irq: 18, latency: 64, mmio: 0xfdfff000
[ 9.389780] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[ 9.389782] IRQ 18/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 9.389828] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
[ 9.417584] bttv0: detected by eeprom: Hauppauge (bt848) [card=2]
[ 9.445249] tveeprom 2-0050: Hauppauge model 56304, rev D , serial# 304485
[ 9.445252] tveeprom 2-0050: tuner model is Temic 4002FH5 (idx 14, type 0)
[ 9.445255] tveeprom 2-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 9.445257] tveeprom 2-0050: audio processor is None (idx 0)
[ 9.445259] tveeprom 2-0050: has no radio
[ 9.445261] bttv0: Hauppauge eeprom indicates model#56304
[ 9.445263] bttv0: tuner type=0
[ 9.475995] tuner 2-0061: chip found @ 0xc2 (bt848 #0 [sw])
[ 9.518736] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 9.518742] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 9.518779] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 9.520166] tuner-simple 2-0061: creating new instance
[ 9.520170] tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
[ 9.538513] bttv0: audio absent, no audio device found!
[ 9.538580] bttv0: registered device video0
[ 9.538603] bttv0: registered device vbi0
[ 10.060045] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 10.076112] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6
[ 10.344684] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 17
[ 10.344690] alloc irq_desc for 17 on cpu 0 node 0
[ 10.344692] alloc kstat_irqs on cpu 0 node 0
[ 10.344704] HDA Intel 0000:03:00.1: PCI INT B -> Link[LNEB] -> GSI 17 (level, low) -> IRQ 17
[ 10.344769] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 11.454885] EXT3 FS on dm-0, internal journal
[ 11.755400] loop: module loaded
[ 11.792530] w83627ehf: Found W83627EHG chip at 0xa10
[ 12.486085] kjournald starting. Commit interval 5 seconds
[ 12.486221] EXT3 FS on sda1, internal journal
[ 12.486225] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.513056] Adding 16777208k swap on /dev/mapper/lvm-swap. Priority:-1 extents:1 across:16777208k
[ 13.969536] fuse init (API version 7.11)
[ 14.272538] w83627ehf w83627ehf.2576: fan1 low limit and alarm disabled
[ 14.272571] w83627ehf w83627ehf.2576: fan2 low limit and alarm disabled
[ 15.754105] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00)
[ 15.754156] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8
[ 15.754159] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa
[ 15.754161] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc
[ 15.754163] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe
[ 15.754165] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 15.840265] Marking TSC unstable due to cpufreq changes
[ 16.148030] Clocksource tsc unstable (delta = -180429761 ns)
[ 21.942953] lp: driver loaded but no devices found
[ 21.958377] ppdev: user-space parallel port driver
[ 24.356046] eth0: no IPv6 routers present
[ 340.015065] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 340.015074] Disabling lock debugging due to kernel taint
[ 340.056647] [fglrx] Maximum main memory to use for locked dma buffers: 1403 MBytes.
[ 340.056941] [fglrx] vendor: 1002 device: 9442 count: 1
[ 340.057453] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 340.060412] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 16
[ 340.060423] alloc irq_desc for 16 on cpu 0 node 0
[ 340.060428] alloc kstat_irqs on cpu 0 node 0
[ 340.060448] pci 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 16 (level, low) -> IRQ 16
[ 340.060458] pci 0000:03:00.0: setting latency timer to 64
[ 340.060771] [fglrx] Kernel PAT support is enabled
[ 340.060829] [fglrx] module loaded - fglrx 8.66.2 [Sep 23 2009] with 1 minors
[1m[7m#[27m[1m[0m
-------------- next part --------------
CPU0
0: 50 XT-PIC-XT timer
1: 2 IO-APIC-edge i8042
4: 6 IO-APIC-edge
6: 5 IO-APIC-edge floppy
7: 1 IO-APIC-edge
8: 0 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 4 IO-APIC-edge i8042
14: 0 IO-APIC-edge ide0
15: 8174 IO-APIC-edge ide1
17: 32 IO-APIC-fasteoi HDA Intel
18: 5 IO-APIC-fasteoi bttv0
19: 91 IO-APIC-fasteoi firewire_ohci
20: 8103 IO-APIC-fasteoi eth0
21: 355564 IO-APIC-fasteoi ohci_hcd:usb2
22: 343751 IO-APIC-fasteoi sata_nv, HDA Intel
23: 3279 IO-APIC-fasteoi ehci_hcd:usb1, sata_nv
NMI: 0 Non-maskable interrupts
LOC: 732295 Local timer interrupts
SPU: 0 Spurious interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
ERR: 1
MIS: 0
-------------- next part --------------
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-2-amd64 x86_64 Debian
Current Operating System: Linux abrasax 2.6.30-2-amd64 #1 SMP Fri Sep 25 22:16:56 UTC 2009 x86_64
Build Date: 13 October 2009 09:39:10AM
xorg-server 2:1.6.5-1 (jcristau at debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 24 21:51:26 2009
(==) Using config file: "/etc/X11/xorg.conf"
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 3:0:1) found
WARNING: All config files need .conf: /etc/modprobe.d/alsa-midiman, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/alsa-oss, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/atarisio, it will be ignored in a future release.
-------------- next part --------------
Nov 24 21:46:50 abrasax kernel: [ 340.015065] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Nov 24 21:46:50 abrasax kernel: [ 340.015074] Disabling lock debugging due to kernel taint
Nov 24 21:46:50 abrasax kernel: [ 340.056647] [fglrx] Maximum main memory to use for locked dma buffers: 1403 MBytes.
Nov 24 21:46:50 abrasax kernel: [ 340.056941] [fglrx] vendor: 1002 device: 9442 count: 1
Nov 24 21:46:50 abrasax kernel: [ 340.057453] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
Nov 24 21:46:50 abrasax kernel: [ 340.060412] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 16
Nov 24 21:46:50 abrasax kernel: [ 340.060423] alloc irq_desc for 16 on cpu 0
node 0
Nov 24 21:46:50 abrasax kernel: [ 340.060428] alloc kstat_irqs on cpu 0 node
0
Nov 24 21:46:50 abrasax kernel: [ 340.060448] pci 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 16 (level, low) -> IRQ 16
Nov 24 21:46:50 abrasax kernel: [ 340.060458] pci 0000:03:00.0: setting latency timer to 64
Nov 24 21:46:50 abrasax kernel: [ 340.060771] [fglrx] Kernel PAT support is enabled
Nov 24 21:46:50 abrasax kernel: [ 340.060829] [fglrx] module loaded - fglrx 8.66.2 [Sep 23 2009] with 1 minors
Nov 24 21:47:12 abrasax acpid: client connected from 4574[0:0]
Nov 24 21:47:12 abrasax acpid: 1 client rule loaded
Nov 24 21:50:34 abrasax syslog-ng[1970]: syslog-ng starting up; version='2.0.9'
-------------- next part --------------
Nov 24 21:50:34 abrasax syslog-ng[1970]: syslog-ng starting up; version='2.0.9'
Nov 24 21:50:34 abrasax kernel: [ 0.000000] Initializing cgroup subsys cpusetNov 24 21:50:34 abrasax kernel: [ 0.000000] Initializing cgroup subsys cpu
Nov 24 21:50:34 abrasax kernel: [ 0.000000] Linux version 2.6.30-2-amd64 (Debian 2.6.30-8) (waldi at debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Fri Sep 25 22:16:56 UTC 2009
Nov 24 21:50:34 abrasax kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.30-2-amd64 root=/dev/mapper/lvm-root ro single
Nov 24 21:50:34 abrasax kernel: [ 0.000000] KERNEL supported cpus:
Nov 24 21:50:34 abrasax kernel: [ 0.000000] Intel GenuineIntel
Nov 24 21:50:34 abrasax kernel: [ 0.000000] AMD AuthenticAMD
Nov 24 21:50:34 abrasax kernel: [ 0.000000] Centaur CentaurHauls
Nov 24 21:50:34 abrasax kernel: [ 0.000000] BIOS-provided physical RAM map:
Nov 24 21:50:34 abrasax kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000005ffc0000 (usable)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] BIOS-e820: 000000005ffc0000 - 000000005ffce000 (ACPI data)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] BIOS-e820: 000000005ffce000 - 000000005fff0000 (ACPI NVS)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] DMI present.
Nov 24 21:50:35 abrasax kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Nov 24 21:50:35 abrasax kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Nov 24 21:50:35 abrasax kernel: [ 0.000000] last_pfn = 0x5ffc0 max_arch_pfn = 0x100000000
Nov 24 21:50:35 abrasax kernel: [ 0.000000] MTRR default type: uncachable
Nov 24 21:50:35 abrasax kernel: [ 0.000000] MTRR fixed ranges enabled:
Nov 24 21:50:35 abrasax kernel: [ 0.000000] 00000-9FFFF write-back
Nov 24 21:50:35 abrasax kernel: [ 0.000000] A0000-EFFFF uncachable
Nov 24 21:50:35 abrasax kernel: [ 0.000000] F0000-FFFFF write-protect
Nov 24 21:50:35 abrasax kernel: [ 0.000000] MTRR variable ranges enabled:
Nov 24 21:50:35 abrasax kernel: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
Nov 24 21:50:35 abrasax kernel: [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
Nov 24 21:50:35 abrasax kernel: [ 0.000000] 2 disabled
Nov 24 21:50:35 abrasax kernel: [ 0.000000] 3 disabled
Nov 24 21:50:35 abrasax kernel: [ 0.000000] 4 base 00000FC000 mask 0FFFFFC000 write-protect
Nov 24 21:50:35 abrasax kernel: [ 0.000000] 5 base 00000DC000 mask 0FFFFFE000 write-back
Nov 24 21:50:35 abrasax kernel: [ 0.000000] 6 disabled
Nov 24 21:50:35 abrasax kernel: [ 0.000000] 7 disabled
Nov 24 21:50:35 abrasax kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 24 21:50:35 abrasax kernel: [ 0.000000] ------------[ cut here ]------------
Nov 24 21:50:35 abrasax kernel: [ 0.000000] WARNING: at /home/blank/debian/kernel/release/linux-2.6/linux-2.6-2.6.30/debian/build/source_amd64_none/arch/x86/kernel/cpu/mtrr/generic.c:456 generic_get_mtrr+0xbf/0xf9()
Nov 24 21:50:35 abrasax kernel: [ 0.000000] Hardware name: MS-7252
Nov 24 21:50:35 abrasax kernel: [ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up.
Nov 24 21:50:35 abrasax kernel: [ 0.000000] Modules linked in:
Nov 24 21:50:35 abrasax kernel: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-2-amd64 #1
Nov 24 21:50:35 abrasax kernel: [ 0.000000] Call Trace:
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8021dadb>] ? generic_get_mtrr+0xbf/0xf9
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8021dadb>] ? generic_get_mtrr+0xbf/0xf9
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff80242373>] ? warn_slowpath_common+0x77/0xa3
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff802423fb>] ? warn_slowpath_fmt+0x51/0x59
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff804b5a23>] ? _spin_unlock_irqrestore+0xd/0xe
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8021dbe7>] ? mtrr_wrmsr+0x1c/0x49
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8021ddec>] ? get_fixed_ranges+0x71/0x98
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8021dbe7>] ? mtrr_wrmsr+0x1c/0x49
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8021dcab>] ? prepare_set+0x97/0x9d
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8021dd04>] ? post_set+0x53/0x60
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff80655f8b>] ? get_mtrr_state+0x2eb/0x2f6
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8021dadb>] ? generic_get_mtrr+0xbf/0xf9
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff804b3a4c>] ? printk+0x4e/0x5a
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff80656b61>] ? mtrr_trim_uncached_memory+0x91/0x311
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff80655afb>] ? mtrr_bp_init+0x1b0/0x1d3
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8065fc35>] ? early_gart_iommu_check+0x9b/0x287
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff80652870>] ? setup_arch+0x41f/0x95b
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8066776a>] ? cgroup_init_subsys+0x10d/0x116
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8064e140>] ? early_idt_handler+0x0/0x71
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8064e96b>] ? start_kernel+0x83/0x386
Nov 24 21:50:35 abrasax kernel: [ 0.000000] [<ffffffff8064e3b7>] ? x86_64_start_kernel+0xf9/0x106
Nov 24 21:50:35 abrasax kernel: [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
-------------- next part --------------
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-2-amd64 x86_64 Debian
Current Operating System: Linux abrasax 2.6.30-2-amd64 #1 SMP Fri Sep 25 22:16:56 UTC 2009 x86_64
Build Date: 13 October 2009 09:39:10AM
xorg-server 2:1.6.5-1 (jcristau at debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 24 21:47:12 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]-0"
(**) | |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3b40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:3:0:0) 1002:9442:1458:21c7 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xd0000000/268435456, 0xfeae0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.66.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.66.2
Module class: X.Org Video Driver
(II) Primary Device is: PCI 03 at 00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.66.2
(II) ATI Proprietary Linux Driver Release Identifier: 8.661
(II) ATI Proprietary Linux Driver Build Date: Sep 23 2009 17:30:33
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x9442) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 3:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x19f8b80
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 3 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Loading extension XFree86-DRI
drmDynamicMajor: found major device number 248
drmDynamicMajor: found major device number 248
drmOpenByBusid: Searching for BusID PCI:3:0:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:3:0:0
(--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442)
(--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x21c7)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfeae0000
(--) fglrx(0): I/O port at 0x0000d000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.15
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV770
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 3:0.0.
-------------- next part --------------
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/pkg-fglrx-devel/attachments/20091124/f5290bf6/attachment-0001.pgp>
More information about the Pkg-fglrx-devel
mailing list