[Pkg-fglrx-devel] Bug#576942: Bug#576942: Bug#576942: /boot/vmlinuz-2.6.32-3-amd64: kernel fix for wrong mtrr mask from MS-7252 bios may be wrong and cause problems with fglrx-driver
Friedrich Delgado Friedrichs
friedel at nomaden.org
Sun Apr 11 15:33:28 UTC 2010
Michael Gilbert schrieb:
> for completeness sake, can you regenerate your log/conf/startx files
> with the latest 10-3~prelease driver and xorg 7.5?
Behaviour has changed since my first report in bug #554847. The whole
system doesn't hang any more.
The screen turns black, with backlight turned on. Power led on the
monitor is on as well.
Mouse and keyboard don't respond at all any more (not even when I
press NumLock or CapsLock on the keyboard).
However I can log on via ssh and examine the system.
The X process is at 100% cpu.
> just to check that it looks reasonable, can you attach your /proc/mtrr
> file? also, you may want read up on mtrr a bit more [0],[1].
Sure.
I've attached the following files:
dmesg.2010-04-11-17:00:20
interrupts-2010-04-11-16:56:15
mtrr-2010-04-11-16:56:10
ps-aux-grep-X
startx.err.2010-04-11-16:56:53
Xorg.0.log.2010-04-11-16:59:27
xorg.conf
I've tried to strace and attach gdb to the running X process, but X
just hangs and strace prints nothing at all. gdb can attach, but I'm
not able to break.
The X process can't be killed, not even with kill -9.
> the thing about this problem is that you have no errors in your log
> files, so everything should be working just fine...
Yes, that's confusing.
> have you tried a different monitor?
no
> can you try adding:
>
> Modes "640x480"
>
> to the "Display" subsection of the "Screen" section?
Yes, tried that, no change.
--
Friedrich Delgado Friedrichs <friedel at nomaden.org>
TauPan on Ircnet and Freenode ;)
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-3-amd64 (Debian 2.6.32-9) (maks at debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Feb 24 18:07:42 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-amd64 root=/dev/mapper/lvm-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000005ffc0000 - 000000005ffce000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005ffce000 - 000000005fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x5ffc0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 base 00000FC000 mask 0FFFFFC000 write-protect
[ 0.000000] 5 base 00000DC000 mask 0FFFFFE000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /build/mattems-linux-2.6_2.6.32-9-amd64-NYTFdD/linux-2.6-2.6.32-9/debian/build/source_amd64_none/arch/x86/kernel/cpu/mtrr/generic.c:467 generic_get_mtrr+0xbf/0xf9()
[ 0.000000] Hardware name: MS-7252
[ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up.
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.32-3-amd64 #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8102238b>] ? generic_get_mtrr+0xbf/0xf9
[ 0.000000] [<ffffffff8102238b>] ? generic_get_mtrr+0xbf/0xf9
[ 0.000000] [<ffffffff8104dbf0>] ? warn_slowpath_common+0x77/0xa3
[ 0.000000] [<ffffffff8104dc78>] ? warn_slowpath_fmt+0x51/0x59
[ 0.000000] [<ffffffff81022497>] ? mtrr_wrmsr+0x1c/0x49
[ 0.000000] [<ffffffff8102269c>] ? get_fixed_ranges+0x71/0x98
[ 0.000000] [<ffffffff81022497>] ? mtrr_wrmsr+0x1c/0x49
[ 0.000000] [<ffffffff8102255b>] ? prepare_set+0x97/0x9d
[ 0.000000] [<ffffffff810225b4>] ? post_set+0x53/0x60
[ 0.000000] [<ffffffff814e1c6b>] ? get_mtrr_state+0x2eb/0x2f6
[ 0.000000] [<ffffffff8102238b>] ? generic_get_mtrr+0xbf/0xf9
[ 0.000000] [<ffffffff812ed452>] ? printk+0x4e/0x5c
[ 0.000000] [<ffffffff814e2842>] ? mtrr_trim_uncached_memory+0x91/0x311
[ 0.000000] [<ffffffff814e17db>] ? mtrr_bp_init+0x1b1/0x1d4
[ 0.000000] [<ffffffff8122f2d2>] ? dmi_name_in_serial+0x1d/0x28
[ 0.000000] [<ffffffff814ebacc>] ? early_gart_iommu_check+0x9b/0x287
[ 0.000000] [<ffffffff814ddd09>] ? setup_arch+0x43f/0x9c6
[ 0.000000] [<ffffffff811ef173>] ? extract_entropy+0x6a/0x125
[ 0.000000] [<ffffffff814da140>] ? early_idt_handler+0x0/0x71
[ 0.000000] [<ffffffff814da9d6>] ? start_kernel+0xcf/0x3dc
[ 0.000000] [<ffffffff814da3b7>] ? x86_64_start_kernel+0xf9/0x106
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000005ffc0000
[ 0.000000] 0000000000 - 005fe00000 page 2M
[ 0.000000] 005fe00000 - 005ffc0000 page 4k
[ 0.000000] kernel direct mapping tables up to 5ffc0000 @ 10000-14000
[ 0.000000] RAMDISK: 3765e000 - 37fef5d7
[ 0.000000] ACPI: RSDP 00000000000f8ae0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000005ffc0000 00038 (v01 A M I OEMRSDT 04000818 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000005ffc0200 00084 (v02 A M I OEMFACP 04000818 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000005ffc0440 048DD (v01 1ADIF 1ADIF006 00000006 INTL 20051117)
[ 0.000000] ACPI: FACS 000000005ffce000 00040
[ 0.000000] ACPI: APIC 000000005ffc0390 00068 (v01 A M I OEMAPIC 04000818 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000005ffc0400 0003C (v01 A M I OEMMCFG 04000818 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000005ffce040 00060 (v01 A M I AMI_OEM 04000818 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000005ffc4d20 00136 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000005ffc0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000005ffc0000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000025ff7] pages c
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 005ffc0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000166aa14] TEXT DATA BSS ==> [0001000000 - 000166aa14]
[ 0.000000] #3 [003765e000 - 0037fef5d7] RAMDISK ==> [003765e000 - 0037fef5d7]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000166b000 - 000166b1a5] BRK ==> [000166b000 - 000166b1a5]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00015fffff] PMD -> [ffff880001c00000-ffff8800031fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005ffc0
[ 0.000000] On node 0 totalpages: 393039
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3826 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5320 pages used for memmap
[ 0.000000] DMA32 zone: 383736 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89880 r8192 d20712 u2097152
[ 0.000000] pcpu-alloc: s89880 r8192 d20712 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 387562
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-amd64 root=/dev/mapper/lvm-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 4400000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1532820k/1572608k available (3014k kernel code, 452k absent, 39336k reserved, 1860k data, 580k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2410.864 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4821.72 BogoMIPS (lpj=9643456)
[ 0.004033] Security Framework initialized
[ 0.004041] SELinux: Disabled at boot.
[ 0.008232] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011614] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.013339] Mount-cache hash table entries: 256
[ 0.013683] Initializing cgroup subsys ns
[ 0.013687] Initializing cgroup subsys cpuacct
[ 0.013773] Initializing cgroup subsys devices
[ 0.013775] Initializing cgroup subsys freezer
[ 0.013777] Initializing cgroup subsys net_cls
[ 0.013804] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.013806] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.013809] CPU 0/0x0 -> Node 0
[ 0.013810] tseg: 0000000000
[ 0.013825] mce: CPU supports 5 MCE banks
[ 0.013838] using C1E aware idle routine
[ 0.013839] Performance Events: AMD PMU driver.
[ 0.013844] ... version: 0
[ 0.013846] ... bit width: 48
[ 0.013847] ... generic registers: 4
[ 0.013849] ... value mask: 0000ffffffffffff
[ 0.013850] ... max period: 00007fffffffffff
[ 0.013852] ... fixed-purpose events: 0
[ 0.013853] ... event mask: 000000000000000f
[ 0.013947] SMP alternatives: switching to UP code
[ 0.025105] Freeing SMP alternatives: 27k freed
[ 0.025120] ACPI: Core revision 20090903
[ 0.038117] Setting APIC routing to flat
[ 0.038613] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.044001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.044001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.044001] ..... (found apic 0 pin 0) ...
[ 0.052001] ....... failed.
[ 0.052001] ...trying to set up timer as Virtual Wire IRQ...
[ 0.052001] ..... failed.
[ 0.052001] ...trying to set up timer as ExtINT IRQ...
[ 0.092645] ..... works.
[ 0.092646] CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02
[ 0.096001] Brought up 1 CPUs
[ 0.096001] Total of 1 processors activated (4821.72 BogoMIPS).
[ 0.096001] CPU0 attaching NULL sched-domain.
[ 0.096001] devtmpfs: initialized
[ 0.096001] regulator: core version 0.5
[ 0.096001] NET: Registered protocol family 16
[ 0.096001] node 0 link 0: io port [1000, ffffff]
[ 0.096001] TOM: 0000000060000000 aka 1536M
[ 0.096001] node 0 link 0: mmio [e0000000, efffffff]
[ 0.096001] node 0 link 0: mmio [a0000, bffff]
[ 0.096001] node 0 link 0: mmio [60000000, fe0bffff]
[ 0.096001] bus: [00,ff] on node 0 link 0
[ 0.096001] bus: 00 index 0 io port: [0, ffff]
[ 0.096001] bus: 00 index 1 mmio: [60000000, fcffffffff]
[ 0.096001] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.096001] ACPI: bus type pci registered
[ 0.096001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.096001] PCI: Not using MMCONFIG.
[ 0.096001] PCI: Using configuration type 1 for base access
[ 0.096241] bio: create slab <bio-0> at 0
[ 0.096806] ACPI: EC: Look up EC in DSDT
[ 0.099884] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.104463] ACPI: Interpreter enabled
[ 0.104467] ACPI: (supports S0 S3 S4 S5)
[ 0.104484] ACPI: Using IOAPIC for interrupt routing
[ 0.104529] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.109402] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.116815] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.125033] ACPI Warning: Incorrect checksum in table [OEMB] - 3C, should be 31 (20090903/tbutils-314)
[ 0.125119] ACPI: No dock devices found.
[ 0.125369] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.125607] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125610] pci 0000:00:02.0: PME# disabled
[ 0.125640] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125642] pci 0000:00:03.0: PME# disabled
[ 0.125673] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125676] pci 0000:00:04.0: PME# disabled
[ 0.125859] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.125901] pci 0000:00:0a.1: reg 20 io port: [0x5000-0x503f]
[ 0.125906] pci 0000:00:0a.1: reg 24 io port: [0x6000-0x603f]
[ 0.125927] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.125933] pci 0000:00:0a.1: PME# disabled
[ 0.125962] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfaebe000-0xfaebefff]
[ 0.125986] pci 0000:00:0b.0: supports D1 D2
[ 0.125988] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125991] pci 0000:00:0b.0: PME# disabled
[ 0.126015] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfaebfc00-0xfaebfcff]
[ 0.126040] pci 0000:00:0b.1: supports D1 D2
[ 0.126042] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126045] pci 0000:00:0b.1: PME# disabled
[ 0.126079] pci 0000:00:0d.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.126116] pci 0000:00:0e.0: reg 10 io port: [0xc800-0xc807]
[ 0.126120] pci 0000:00:0e.0: reg 14 io port: [0xc480-0xc483]
[ 0.126124] pci 0000:00:0e.0: reg 18 io port: [0xc400-0xc407]
[ 0.126128] pci 0000:00:0e.0: reg 1c io port: [0xc080-0xc083]
[ 0.126132] pci 0000:00:0e.0: reg 20 io port: [0xc000-0xc00f]
[ 0.126136] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfaebd000-0xfaebdfff]
[ 0.126177] pci 0000:00:0f.0: reg 10 io port: [0xbc00-0xbc07]
[ 0.126181] pci 0000:00:0f.0: reg 14 io port: [0xb880-0xb883]
[ 0.126185] pci 0000:00:0f.0: reg 18 io port: [0xb800-0xb807]
[ 0.126189] pci 0000:00:0f.0: reg 1c io port: [0xb480-0xb483]
[ 0.126193] pci 0000:00:0f.0: reg 20 io port: [0xb400-0xb40f]
[ 0.126198] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfaebc000-0xfaebcfff]
[ 0.126273] pci 0000:00:10.1: reg 10 32bit mmio: [0xfaeb8000-0xfaebbfff]
[ 0.126300] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.126303] pci 0000:00:10.1: PME# disabled
[ 0.126335] pci 0000:00:14.0: reg 10 32bit mmio: [0xfaeb7000-0xfaeb7fff]
[ 0.126339] pci 0000:00:14.0: reg 14 io port: [0xb080-0xb087]
[ 0.126358] pci 0000:00:14.0: supports D1 D2
[ 0.126359] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126362] pci 0000:00:14.0: PME# disabled
[ 0.126528] pci 0000:03:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.126535] pci 0000:03:00.0: reg 18 64bit mmio: [0xfafe0000-0xfafeffff]
[ 0.126539] pci 0000:03:00.0: reg 20 io port: [0xd000-0xd0ff]
[ 0.126546] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfafc0000-0xfafdffff]
[ 0.126559] pci 0000:03:00.0: supports D1 D2
[ 0.126584] pci 0000:03:00.1: reg 10 64bit mmio: [0xfaffc000-0xfaffffff]
[ 0.126607] pci 0000:03:00.1: supports D1 D2
[ 0.132053] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff]
[ 0.132055] pci 0000:00:04.0: bridge 32bit mmio: [0xfaf00000-0xfaffffff]
[ 0.132059] pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.132096] pci 0000:04:07.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.132153] pci 0000:04:07.1: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.132205] pci 0000:04:07.2: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.132269] pci 0000:04:08.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.132275] pci 0000:04:08.0: reg 14 io port: [0xec00-0xec7f]
[ 0.132304] pci 0000:04:08.0: supports D2
[ 0.132306] pci 0000:04:08.0: PME# supported from D2 D3hot D3cold
[ 0.132310] pci 0000:04:08.0: PME# disabled
[ 0.132339] pci 0000:00:10.0: transparent bridge
[ 0.132342] pci 0000:00:10.0: bridge io port: [0xe000-0xefff]
[ 0.132345] pci 0000:00:10.0: bridge 32bit mmio: [0xfb000000-0xfebfffff]
[ 0.132356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.132536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.132591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.132650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.132732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.142853] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
[ 0.143031] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.143208] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.143384] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
[ 0.143559] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
[ 0.143735] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *11
[ 0.143911] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.144097] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.144274] ACPI: PCI Interrupt Link [LUB0] (IRQs 21) *10
[ 0.144449] ACPI: PCI Interrupt Link [LUB2] (IRQs 23) *7
[ 0.144624] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
[ 0.144807] ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *11
[ 0.144981] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.145158] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.145334] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
[ 0.145515] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 0.145697] ACPI: PCI Interrupt Link [LSA0] (IRQs 22) *7
[ 0.145871] ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *7
[ 0.146077] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.146198] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.146203] vgaarb: loaded
[ 0.146289] PCI: Using ACPI for IRQ routing
[ 0.146452] Switching to clocksource tsc
[ 0.147549] pnp: PnP ACPI init
[ 0.147570] ACPI: bus type pnp registered
[ 0.150158] pnp: PnP ACPI: found 16 devices
[ 0.150160] ACPI: ACPI bus type pnp unregistered
[ 0.150172] system 00:08: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.150178] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.150181] system 00:09: ioport range 0x800-0x80f has been reserved
[ 0.150184] system 00:09: ioport range 0x4000-0x407f has been reserved
[ 0.150186] system 00:09: ioport range 0x4080-0x40ff has been reserved
[ 0.150189] system 00:09: ioport range 0x4400-0x447f has been reserved
[ 0.150192] system 00:09: ioport range 0x4480-0x44ff has been reserved
[ 0.150195] system 00:09: ioport range 0x4800-0x487f has been reserved
[ 0.150198] system 00:09: ioport range 0x4880-0x48ff has been reserved
[ 0.150200] system 00:09: ioport range 0x2000-0x207f has been reserved
[ 0.150203] system 00:09: ioport range 0x2080-0x20ff has been reserved
[ 0.150206] system 00:09: iomem range 0xfaec0000-0xfaefffff has been reserved
[ 0.150209] system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.150212] system 00:09: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.150217] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.150220] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.150225] system 00:0d: ioport range 0xa00-0xa0f has been reserved
[ 0.150228] system 00:0d: ioport range 0xa10-0xa1f has been reserved
[ 0.150232] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.150237] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.150240] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.150242] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.150245] system 00:0f: iomem range 0x100000-0x5fffffff could not be reserved
[ 0.150248] system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.154990] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.154992] pci 0000:00:02.0: IO window: disabled
[ 0.154994] pci 0000:00:02.0: MEM window: disabled
[ 0.154996] pci 0000:00:02.0: PREFETCH window: disabled
[ 0.154999] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.155001] pci 0000:00:03.0: IO window: disabled
[ 0.155003] pci 0000:00:03.0: MEM window: disabled
[ 0.155005] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.155009] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 0.155011] pci 0000:00:04.0: IO window: 0xd000-0xdfff
[ 0.155014] pci 0000:00:04.0: MEM window: 0xfaf00000-0xfaffffff
[ 0.155017] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.155021] pci 0000:00:10.0: PCI bridge, secondary bus 0000:04
[ 0.155023] pci 0000:00:10.0: IO window: 0xe000-0xefff
[ 0.155027] pci 0000:00:10.0: MEM window: 0xfb000000-0xfebfffff
[ 0.155029] pci 0000:00:10.0: PREFETCH window: disabled
[ 0.155038] pci 0000:00:02.0: setting latency timer to 64
[ 0.155042] pci 0000:00:03.0: setting latency timer to 64
[ 0.155046] pci 0000:00:04.0: setting latency timer to 64
[ 0.155050] pci 0000:00:10.0: setting latency timer to 64
[ 0.155054] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.155056] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.155059] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.155061] pci_bus 0000:03: resource 1 mem: [0xfaf00000-0xfaffffff]
[ 0.155064] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.155066] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.155069] pci_bus 0000:04: resource 1 mem: [0xfb000000-0xfebfffff]
[ 0.155071] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.155073] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.155109] NET: Registered protocol family 2
[ 0.155234] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.156236] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.159688] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.160518] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.160522] TCP reno registered
[ 0.160626] NET: Registered protocol family 1
[ 0.160676] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.160693] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.160713] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.593621] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.593669] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.593718] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.593769] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.593784] pci 0000:03:00.0: Boot video device
[ 0.593842] Unpacking initramfs...
[ 0.820522] Freeing initrd memory: 9797k freed
[ 0.829197] audit: initializing netlink socket (disabled)
[ 0.829210] type=2000 audit(1270997633.825:1): initialized
[ 0.829397] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.830733] VFS: Disk quotas dquot_6.5.2
[ 0.830787] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.830862] msgmni has been set to 3012
[ 0.831032] alg: No test for stdrng (krng)
[ 0.831082] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.831085] io scheduler noop registered
[ 0.831087] io scheduler anticipatory registered
[ 0.831089] io scheduler deadline registered
[ 0.831118] io scheduler cfq registered (default)
[ 0.831251] alloc irq_desc for 24 on node 0
[ 0.831253] alloc kstat_irqs on node 0
[ 0.831262] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.831267] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.831348] alloc irq_desc for 25 on node 0
[ 0.831350] alloc kstat_irqs on node 0
[ 0.831354] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
[ 0.831357] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.831429] alloc irq_desc for 26 on node 0
[ 0.831431] alloc kstat_irqs on node 0
[ 0.831435] pcieport 0000:00:04.0: irq 26 for MSI/MSI-X
[ 0.831438] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.832749] Linux agpgart interface v0.103
[ 0.832751] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.832855] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.832952] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.833165] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.833346] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.833398] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.836078] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.836083] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.836186] mice: PS/2 mouse device common for all mice
[ 0.836233] rtc_cmos 00:02: RTC can wake from S4
[ 0.836271] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.836302] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.836314] cpuidle: using governor ladder
[ 0.836316] cpuidle: using governor menu
[ 0.836320] No iBFT detected.
[ 0.836659] TCP cubic registered
[ 0.836771] NET: Registered protocol family 10
[ 0.837254] lo: Disabled Privacy Extensions
[ 0.837546] Mobile IPv6
[ 0.837548] NET: Registered protocol family 17
[ 0.837651] PM: Resume from disk failed.
[ 0.837657] registered taskstats version 1
[ 0.838025] rtc_cmos 00:02: setting system clock to 2010-04-11 14:53:54 UTC (1270997634)
[ 0.838076] Freeing unused kernel memory: 580k freed
[ 0.838418] Write protecting the kernel read-only data: 4144k
[ 0.944990] ACPI Warning for \_TZ_.THRM._TZD: Return Package type mismatch at index 0 - found Processor, expected Reference (20090903/nspredef-1012)
[ 0.944999] ACPI: Expecting a [Reference] package element, found type C
[ 0.945156] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.945163] ACPI: Thermal Zone [THRM] (80 C)
[ 1.117677] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.118015] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 1.118020] alloc irq_desc for 20 on node 0
[ 1.118022] alloc kstat_irqs on node 0
[ 1.118034] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 1.118039] forcedeth 0000:00:14.0: setting latency timer to 64
[ 1.118089] nv_probe: set workaround bit for reversed mac addr
[ 1.159342] SCSI subsystem initialized
[ 1.181641] libata version 3.00 loaded.
[ 1.186657] Uniform Multi-Platform E-IDE driver
[ 1.198817] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.198827] ACPI: Power Button [PWRB]
[ 1.198937] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.198941] ACPI: Power Button [PWRF]
[ 1.206086] Floppy drive(s): fd0 is 1.44M
[ 1.211343] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 1.211349] alloc irq_desc for 19 on node 0
[ 1.211351] alloc kstat_irqs on node 0
[ 1.211364] firewire_ohci 0000:04:08.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 1.211595] usbcore: registered new interface driver usbfs
[ 1.211672] usbcore: registered new interface driver hub
[ 1.211763] usbcore: registered new device driver usb
[ 1.213862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.225260] FDC 0 is a post-1991 82077
[ 1.281628] firewire_ohci: Added fw-ohci device 0000:04:08.0, OHCI version 1.10
[ 1.516088] firewire_core: created device fw0: GUID 88aa99bbddee7766, S400
[ 1.533814] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 66:77:44:22:33:11
[ 1.533818] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 1.534322] sata_nv 0000:00:0e.0: version 3.5
[ 1.534640] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[ 1.534646] alloc irq_desc for 22 on node 0
[ 1.534648] alloc kstat_irqs on node 0
[ 1.534660] sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
[ 1.534663] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 1.534718] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 1.535129] scsi0 : sata_nv
[ 1.535303] scsi1 : sata_nv
[ 1.535498] ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 22
[ 1.535501] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 22
[ 1.535587] amd74xx 0000:00:0d.0: UDMA133 controller
[ 1.535590] amd74xx 0000:00:0d.0: IDE controller (0x10de:0x0265 rev 0xa1)
[ 1.535626] amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later
[ 1.535631] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.535637] ide1: BM-DMA at 0xffa8-0xffaf
[ 1.535642] Probing IDE interface ide0...
[ 2.000030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.008346] ata1.00: ATA-8: Hitachi HDT721010SLA360, ST6OA3AA, max UDMA/133
[ 2.008349] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.024351] ata1.00: configured for UDMA/133
[ 2.024444] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
[ 2.104046] Probing IDE interface ide1...
[ 2.492031] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.500240] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
[ 2.500242] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.508247] ata2.00: configured for UDMA/133
[ 2.508315] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 3.176005] hdd: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
[ 3.176058] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.176793] hdd: UDMA/33 mode selected
[ 3.177285] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.177350] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.182502] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 3.182510] alloc irq_desc for 23 on node 0
[ 3.182512] alloc kstat_irqs on node 0
[ 3.182525] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 3.182545] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 3.182548] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 3.182579] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 3.182606] ehci_hcd 0000:00:0b.1: debug port 1
[ 3.182613] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 3.182635] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfaebfc00
[ 3.192005] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 3.192035] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.192038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.192040] usb usb1: Product: EHCI Host Controller
[ 3.192042] usb usb1: Manufacturer: Linux 2.6.32-3-amd64 ehci_hcd
[ 3.192044] usb usb1: SerialNumber: 0000:00:0b.1
[ 3.192170] usb usb1: configuration #1 chosen from 1 choice
[ 3.192223] hub 1-0:1.0: USB hub found
[ 3.192232] hub 1-0:1.0: 8 ports detected
[ 3.193160] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 3.193166] sata_nv 0000:00:0f.0: PCI INT A -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 3.193170] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 3.193233] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 3.194696] scsi2 : sata_nv
[ 3.196307] scsi3 : sata_nv
[ 3.196552] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 23
[ 3.196555] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 23
[ 3.216472] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.216831] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 3.216836] alloc irq_desc for 21 on node 0
[ 3.216838] alloc kstat_irqs on node 0
[ 3.216850] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[ 3.216875] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 3.216878] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 3.216894] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 3.216928] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfaebe000
[ 3.274012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.274015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.274017] usb usb2: Product: OHCI Host Controller
[ 3.274019] usb usb2: Manufacturer: Linux 2.6.32-3-amd64 ohci_hcd
[ 3.274021] usb usb2: SerialNumber: 0000:00:0b.0
[ 3.274154] usb usb2: configuration #1 chosen from 1 choice
[ 3.274202] hub 2-0:1.0: USB hub found
[ 3.274213] hub 2-0:1.0: 8 ports detected
[ 3.504007] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 3.637929] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 3.637932] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.637934] usb 1-2: Product: USB2.0 Hub
[ 3.638259] usb 1-2: configuration #1 chosen from 1 choice
[ 3.638611] hub 1-2:1.0: USB hub found
[ 3.638935] hub 1-2:1.0: 4 ports detected
[ 3.664037] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.688252] ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
[ 3.688255] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.696294] ata3.00: configured for UDMA/133
[ 3.696392] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 3.864008] usb 1-4: new high speed USB device using ehci_hcd and address 4
[ 3.997076] usb 1-4: New USB device found, idVendor=0409, idProduct=005a
[ 3.997078] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.997433] usb 1-4: configuration #1 chosen from 1 choice
[ 3.997645] hub 1-4:1.0: USB hub found
[ 3.997711] hub 1-4:1.0: 2 ports detected
[ 4.018412] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.035554] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.035588] sd 0:0:0:0: [sda] Write Protect is off
[ 4.035591] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.035607] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.035715] sda:
[ 4.035855] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.035885] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.035887] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.035903] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.035984] sdb:
[ 4.036272] ide-cd driver 5.00
[ 4.036367] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.036397] sd 2:0:0:0: [sdc] Write Protect is off
[ 4.036400] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.036415] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.036506] sdc: sdb1
[ 4.037675] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.038462] ide-cd: hdd: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 4.038467] Uniform CD-ROM driver Revision: 3.20
[ 4.043210] sdc1
[ 4.043456] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 4.044480] sda1 sda2
[ 4.044740] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.300018] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 4.518079] usb 2-3: New USB device found, idVendor=0403, idProduct=6001
[ 4.518082] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.518084] usb 2-3: Product: usb serial converter
[ 4.518086] usb 2-3: Manufacturer: ftdi
[ 4.518087] usb 2-3: SerialNumber: ftDD6XRV
[ 4.518175] usb 2-3: configuration #1 chosen from 1 choice
[ 4.591744] device-mapper: uevent: version 1.0.3
[ 4.592117] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 4.596997] usb 1-2.2: new full speed USB device using ehci_hcd and address 5
[ 4.691857] usb 1-2.2: New USB device found, idVendor=0c4b, idProduct=0300
[ 4.691861] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.691864] usb 1-2.2: Product: cyberJack pinpad(a)
[ 4.691866] usb 1-2.2: Manufacturer: Reiner-SCT
[ 4.691868] usb 1-2.2: SerialNumber: 3653657864
[ 4.691991] usb 1-2.2: configuration #1 chosen from 1 choice
[ 4.764245] usb 1-2.3: new high speed USB device using ehci_hcd and address 6
[ 4.771609] PM: Starting manual resume from disk
[ 4.771614] PM: Resume from partition 254:1
[ 4.771615] PM: Checking hibernation image.
[ 4.771836] PM: Error -22 checking image file
[ 4.771837] PM: Resume from disk failed.
[ 4.828808] kjournald starting. Commit interval 5 seconds
[ 4.828820] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.862212] usb 1-2.3: New USB device found, idVendor=05e3, idProduct=0608
[ 4.862217] usb 1-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.862219] usb 1-2.3: Product: USB2.0 Hub
[ 4.862312] usb 1-2.3: configuration #1 chosen from 1 choice
[ 4.862724] hub 1-2.3:1.0: USB hub found
[ 4.862996] hub 1-2.3:1.0: 4 ports detected
[ 4.952889] usb 1-4.1: new low speed USB device using ehci_hcd and address 7
[ 5.065504] usb 1-4.1: New USB device found, idVendor=045e, idProduct=0047
[ 5.065508] usb 1-4.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 5.065510] usb 1-4.1: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 5.065512] usb 1-4.1: Manufacturer: Microsoft
[ 5.065614] usb 1-4.1: configuration #1 chosen from 1 choice
[ 5.141014] usb 1-2.3.1: new full speed USB device using ehci_hcd and address 8
[ 5.237266] usb 1-2.3.1: New USB device found, idVendor=0619, idProduct=0501
[ 5.237270] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.237273] usb 1-2.3.1: Product: SII Smart Label Printer 440
[ 5.237275] usb 1-2.3.1: Manufacturer: Seiko Instruments Inc.
[ 5.237277] usb 1-2.3.1: SerialNumber: 7BA00272
[ 5.237372] usb 1-2.3.1: configuration #1 chosen from 1 choice
[ 5.309027] usb 1-2.3.2: new low speed USB device using ehci_hcd and address 9
[ 5.404156] usb 1-2.3.2: New USB device found, idVendor=046a, idProduct=0011
[ 5.404161] usb 1-2.3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.404268] usb 1-2.3.2: configuration #1 chosen from 1 choice
[ 6.461784] udev: starting version 151
[ 8.087560] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 8.087565] Disabling lock debugging due to kernel taint
[ 8.175905] processor LNXCPU:00: registered as cooling_device0
[ 8.176127] [fglrx] Maximum main memory to use for locked dma buffers: 1403 MBytes.
[ 8.176352] usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x0619 pid 0x0501
[ 8.176374] usbcore: registered new interface driver usblp
[ 8.176622] [fglrx] vendor: 1002 device: 9442 count: 1
[ 8.176908] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 8.177239] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[ 8.177245] alloc irq_desc for 18 on node 0
[ 8.177247] alloc kstat_irqs on node 0
[ 8.177259] pci 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
[ 8.177264] pci 0000:03:00.0: setting latency timer to 64
[ 8.177430] [fglrx] Kernel PAT support is enabled
[ 8.177458] [fglrx] module loaded - fglrx 8.72.10 [Mar 11 2010] with 1 minors
[ 8.179704] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 8.198221] usbcore: registered new interface driver usbserial
[ 8.198341] USB Serial support registered for generic
[ 8.198484] usbcore: registered new interface driver usbserial_generic
[ 8.198486] usbserial: USB Serial Driver core
[ 8.205787] EDAC MC: Ver: 2.1.0 Feb 24 2010
[ 8.206396] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.265351] EDAC amd64_edac: Ver: 3.2.0 Feb 24 2010
[ 8.267246] USB Serial support registered for FTDI USB Serial Device
[ 8.267524] ftdi_sio 2-3:1.0: FTDI USB Serial Device converter detected
[ 8.267584] usb 2-3: Detected FT232BM
[ 8.267586] usb 2-3: Number of endpoints 2
[ 8.267588] usb 2-3: Endpoint 1 MaxPacketSize 64
[ 8.267590] usb 2-3: Endpoint 2 MaxPacketSize 64
[ 8.267591] usb 2-3: Setting MaxPacketSize 64
[ 8.269105] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 8.269111] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 8.269112] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 8.269114] (Note that use of the override may cause unknown side effects.)
[ 8.269168] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 8.269692] usb 2-3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 8.269742] usbcore: registered new interface driver ftdi_sio
[ 8.269744] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 8.271484] usbcore: registered new interface driver hiddev
[ 8.273882] i2c i2c-0: nForce2 SMBus adapter at 0x5000
[ 8.273919] i2c i2c-1: nForce2 SMBus adapter at 0x6000
[ 8.275758] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input4
[ 8.275872] generic-usb 0003:045E:0047.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:0b.1-4.1/input0
[ 8.281483] input: HID 046a:0011 as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3.2/1-2.3.2:1.0/input/input5
[ 8.281594] generic-usb 0003:046A:0011.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:0b.1-2.3.2/input0
[ 8.281631] usbcore: registered new interface driver usbhid
[ 8.281634] usbhid: v2.6:USB HID core driver
[ 8.331454] Linux video capture interface: v2.00
[ 8.700348] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
[ 8.705067] cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected], frontend(s): 1
[ 8.705071] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 8.749386] cx2388x alsa driver version 0.0.7 loaded
[ 8.749407] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[ 8.826192] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
[ 8.864842] tuner 2-0043: chip found @ 0x86 (cx88[0])
[ 8.887324] tda9887 2-0043: creating new instance
[ 8.887328] tda9887 2-0043: tda988[5/6/7] found
[ 8.893456] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 8.893463] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 8.893503] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 8.895883] tuner 2-0061: chip found @ 0xc2 (cx88[0])
[ 8.934044] tveeprom 2-0050: Hauppauge model 96019, rev D6D3, serial# 5412725
[ 8.934047] tveeprom 2-0050: MAC address is 00:0d:fe:52:97:75
[ 8.934050] tveeprom 2-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)
[ 8.934053] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 8.934056] tveeprom 2-0050: audio processor is CX882 (idx 33)
[ 8.934058] tveeprom 2-0050: decoder processor is CX882 (idx 25)
[ 8.934061] tveeprom 2-0050: has radio, has IR receiver, has IR transmitter
[ 8.934063] cx88[0]: hauppauge eeprom: model=96019
[ 8.939087] tuner-simple 2-0061: creating new instance
[ 8.939091] tuner-simple 2-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner)
[ 8.943222] cx88[0]/2: cx2388x 8802 Driver Manager
[ 8.943568] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 17
[ 8.943573] alloc irq_desc for 17 on node 0
[ 8.943575] alloc kstat_irqs on node 0
[ 8.943588] cx88-mpeg driver manager 0000:04:07.2: PCI INT A -> Link[LNKD] -> GSI 17 (level, low) -> IRQ 17
[ 8.943595] cx88[0]/2: found at 0000:04:07.2, rev: 5, irq: 17, latency: 64, mmio: 0xfd000000
[ 8.943602] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 8.944833] cx88_audio 0000:04:07.1: PCI INT A -> Link[LNKD] -> GSI 17 (level, low) -> IRQ 17
[ 8.944843] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 8.944868] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 8.958810] cx8800 0000:04:07.0: PCI INT A -> Link[LNKD] -> GSI 17 (level, low) -> IRQ 17
[ 8.958821] cx88[0]/0: found at 0000:04:07.0, rev: 5, irq: 17, latency: 64, mmio: 0xfb000000
[ 8.958834] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 9.014137] wm8775 2-001b: chip found @ 0x36 (cx88[0])
[ 9.022647] cx88[0]/0: registered device video0 [v4l2]
[ 9.022693] cx88[0]/0: registered device vbi0
[ 9.022739] cx88[0]/0: registered device radio0
[ 9.110448] cx88/2: cx2388x dvb driver version 0.0.7 loaded
[ 9.110451] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 9.110455] cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
[ 9.110458] cx88[0]/2: cx2388x based DVB/ATSC card
[ 9.110460] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 9.241803] tuner-simple 2-0061: attaching existing instance
[ 9.241808] tuner-simple 2-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead
[ 9.244130] DVB: registering new adapter (cx88[0])
[ 9.244134] DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
[ 9.401175] cx2388x blackbird driver version 0.0.7 loaded
[ 9.401178] cx88/2: registering cx8802 driver, type: blackbird access: shared
[ 9.401182] cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
[ 9.401186] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design)
[ 9.401405] cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted
[ 9.408015] cx88-mpeg driver manager 0000:04:07.2: firmware: requesting v4l-cx2341x-enc.fw
[ 11.851054] cx88[0]/2-bb: Firmware upload successful.
[ 11.859244] cx88[0]/2-bb: Firmware version is 0x02060039
[ 11.866452] cx88[0]/2: registered device video1 [mpeg]
[ 11.896051] hda_codec: ALC883: BIOS auto-probing.
[ 12.208089] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6
[ 12.464531] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 16
[ 12.464537] alloc irq_desc for 16 on node 0
[ 12.464539] alloc kstat_irqs on node 0
[ 12.464551] HDA Intel 0000:03:00.1: PCI INT B -> Link[LNEB] -> GSI 16 (level, low) -> IRQ 16
[ 12.464613] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 13.457107] EXT3 FS on dm-0, internal journal
[ 14.132912] Adding 16777208k swap on /dev/mapper/lvm-swap. Priority:-1 extents:1 across:16777208k
[ 14.359641] kjournald starting. Commit interval 5 seconds
[ 14.359775] EXT3 FS on sda1, internal journal
[ 14.359779] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.041298] loop: module loaded
[ 15.087870] w83627ehf: Found W83627EHG chip at 0xa10
[ 16.168636] fuse init (API version 7.13)
[ 16.334360] w83627ehf w83627ehf.2576: fan1 low limit and alarm disabled
[ 16.334393] w83627ehf w83627ehf.2576: fan2 low limit and alarm disabled
[ 17.972250] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00)
[ 17.972299] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8
[ 17.972301] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa
[ 17.972303] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc
[ 17.972305] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe
[ 17.972307] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 18.080229] Marking TSC unstable due to cpufreq changes
[ 18.080297] Switching to clocksource acpi_pm
[ 26.352024] eth0: no IPv6 routers present
[ 39.083064] lp: driver loaded but no devices found
[ 39.094940] ppdev: user-space parallel port driver
[ 42.301441] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 42.305249] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
-------------- next part --------------
CPU0
0: 51 XT-PIC-XT timer
1: 2 IO-APIC-edge i8042
3: 2 IO-APIC-edge
4: 2 IO-APIC-edge
6: 5 IO-APIC-edge floppy
7: 1 IO-APIC-edge
8: 0 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 4 IO-APIC-edge i8042
14: 0 IO-APIC-edge ide0
15: 1089 IO-APIC-edge ide1
16: 33 IO-APIC-fasteoi HDA Intel
17: 0 IO-APIC-fasteoi cx88[0], cx88[0], cx88[0]
19: 4 IO-APIC-fasteoi firewire_ohci
20: 1045 IO-APIC-fasteoi eth0
21: 124937 IO-APIC-fasteoi ohci_hcd:usb2
22: 28316 IO-APIC-fasteoi sata_nv, HDA Intel
23: 3167 IO-APIC-fasteoi ehci_hcd:usb1, sata_nv
NMI: 0 Non-maskable interrupts
LOC: 12577 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
PND: 0 Performance pending work
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 1
MIS: 0
-------------- next part --------------
reg00: base=0x000000000 ( 0MB), size= 1024MB, count=1: write-back
reg01: base=0x040000000 ( 1024MB), size= 512MB, count=1: write-back
reg04: base=0x0000fc000 ( 0MB), size= 16KB, count=1: write-protect
reg05: base=0x0000dc000 ( 0MB), size= 8KB, count=1: write-back
-------------- next part --------------
root 2702 0.0 0.0 15452 820 tty1 S+ 17:04 0:00 xinit /etc/X11/xinit/xinitrc -- /etc/X11/xinit/xserverrc :0 -auth /home/root/tmp/serverauth.OiVVp5HoHi
root 2703 97.9 0.4 79592 6712 tty7 R<s+ 17:04 1:12 /usr/bin/X -nolisten tcp :0 -auth /home/root/tmp/serverauth.OiVVp5HoHi
root 2982 0.0 0.0 5952 632 pts/4 S+ 17:05 0:00 grep X
-------------- next part --------------
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-amd64 x86_64 Debian
Current Operating System: Linux abrasax 2.6.32-3-amd64 #1 SMP Wed Feb 24 18:07:42 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-amd64 root=/dev/mapper/lvm-root ro quiet
Build Date: 23 March 2010 04:00:24PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi at debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 11 16:56:53 2010
(==) Using config file: "/etc/X11/xorg.conf"
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 3:0:1) found
WARNING: All config files need .conf: /etc/modprobe.d/hvr-1300, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/alsa-midiman, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/alsa-oss, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/atarisio, it will be ignored in a future release.
Killed
-------------- next part --------------
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-amd64 x86_64 Debian
Current Operating System: Linux abrasax 2.6.32-3-amd64 #1 SMP Wed Feb 24 18:07:42 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-amd64 root=/dev/mapper/lvm-root ro quiet
Build Date: 23 March 2010 04:00:24PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi at debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 11 16:56:53 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]-0"
(**) | |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c3240
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:3:0:0) 1002:9442:1458:21c7 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xd0000000/268435456, 0xfafe0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
(--) PCI: (0:4:7:0) 14f1:8800:0070:9601 Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder rev 5, Mem @ 0xfb000000/16777216
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.10
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.10
(II) ATI Proprietary Linux Driver Version Identifier:8.72.10
(II) ATI Proprietary Linux Driver Release Identifier: 8.72.1
(II) ATI Proprietary Linux Driver Build Date: Mar 10 2010 23:41:33
(II) Primary Device is: PCI 03 at 00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x9442) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 3:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x25b84c0
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:3:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:3:0:0
(--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442)
(--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x21c7)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfafe0000
(--) fglrx(0): I/O port at 0x0000d000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.15
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV770
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 3:0.0.
-------------- next part --------------
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
More information about the Pkg-fglrx-devel
mailing list