No subject
Fri Aug 27 17:10:57 UTC 2010
ATI 57xx series, they still haven't fixed it since 10-4 .
Downgrading it's impossible since the changes in xorg.
I'm reporting to you mainly to send a public information about that to
other users.
I'll try to fill the bug to ATI hoping for a fix.
p.s. Keep the good work you are doing with fglrx guys i owe you a lot
of beers :-D
Regards
Samuele
-- Package-specific info:
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]
DRM and fglrx Informations from dmesg:
No AGP bridge found
No AGP bridge found
PCI-DMA: Disabling AGP.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Linux agpgart interface v0.103
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes.
[fglrx] vendor: 1002 device: 68b8 count: 1
[fglrx] ioport: bar 4, base 0xc000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.77.5 [Aug 25 2010] with 1 minors
[fglrx] Firegl kernel thread PID: 3970
[fglrx] IRQ 45 Enabled
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f91f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 2581 Aug 18 20:46 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-DFP3"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
##Option "Position" "0 0"
Option "Position" "1280 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-CRT1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1280x1024"
Option "TargetRefresh" "75"
##Option "Position" "1920 19"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP2"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "1280 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "DesktopSetup" "clone"
Option "Monitor-DFP3" "0-DFP3"
Option "Monitor-CRT1" "0-CRT1"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-1"
Driver "fglrx"
Option "Monitor-CRT1" "0-CRT1"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3200 3200
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 31834 Oct 25 22:04 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux cthulhu 2.6.35.2 #1 SMP Sat Oct 2 01:27:32 CEST 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35.2 root=UUID=2e3053e8-f455-4da5-b7d6-dc2247436660 ro quiet
Build Date: 10 October 2010 11:06:53AM
xorg-server 2:1.7.7-8 (Cyril Brulebois <kibi at debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 25 18:48:04 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "aticonfig-Device[0]-0"
(==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
(**) Option "Xinerama" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c8a20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:68b8:1002:e147 ATI Technologies Inc Juniper [Radeon HD 5700 Series] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/131072, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.77.5
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.77.5
(II) ATI Proprietary Linux Driver Version Identifier:8.77.5
(II) ATI Proprietary Linux Driver Release Identifier: 8.771
(II) ATI Proprietary Linux Driver Build Date: Aug 25 2010 21:38:26
(II) Primary Device is: PCI 01 at 00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x68B8) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:5) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x26b7560
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DesktopSetup" "clone"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): ATI 2D Acceleration Architecture enabled
(--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series" (Chipset = 0x68b8)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0xe147)
(==) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfe8e0000
(--) fglrx(0): I/O port at 0x0000c000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 12.14
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: JUNIPER
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
(II) fglrx(0): Interrupt handler installed at IRQ 45.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) fglrx(0): Active stereo disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output DFP3 using monitor section 0-DFP3
(**) fglrx(0): Option "PreferredMode" "1920x1080"
(**) fglrx(0): Option "Position" "1280 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output DFP4 has no monitor section
(II) fglrx(0): Output CRT1 using monitor section 0-CRT1
(**) fglrx(0): Option "PreferredMode" "1280x1024"
(**) fglrx(0): Option "Position" "0 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "75"
(II) fglrx(0): Output CRT2 has no monitor section
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: DFP3
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: GSM Model: 5723 Serial#: 582217
(II) fglrx(0): Year: 2010 Week: 2
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.633 redY: 0.351 greenX: 0.335 greenY: 0.608
(II) fglrx(0): blueX: 0.145 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400 at 70Hz
(II) fglrx(0): 640x480 at 60Hz
(II) fglrx(0): 640x480 at 75Hz
(II) fglrx(0): 800x600 at 56Hz
(II) fglrx(0): 800x600 at 60Hz
(II) fglrx(0): 800x600 at 75Hz
(II) fglrx(0): 832x624 at 75Hz
(II) fglrx(0): 1024x768 at 60Hz
(II) fglrx(0): 1024x768 at 75Hz
(II) fglrx(0): 1280x1024 at 75Hz
(II) fglrx(0): 1152x864 at 75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
(II) fglrx(0): Monitor name: W2486
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff001e6d235749e20800
(II) fglrx(0): 0214010380351e78ea3f35a259559b25
(II) fglrx(0): 0e5054a76b80b30081808140714f0101
(II) fglrx(0): 0101010101011a3680a070381f403020
(II) fglrx(0): 3500132b2100001a023a801871382d40
(II) fglrx(0): 582c4500132b2100001e000000fd0038
(II) fglrx(0): 4b1e530f000a202020202020000000fc
(II) fglrx(0): 0057323438360a2020202020202000fa
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Connected Display1: CRT1
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: ACI Model: 19e3 Serial#: 17114
(II) fglrx(0): Year: 2006 Week: 50
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.644 redY: 0.357 greenX: 0.298 greenY: 0.613
(II) fglrx(0): blueX: 0.142 blueY: 0.078 whiteX: 0.310 whiteY: 0.340
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400 at 70Hz
(II) fglrx(0): 640x480 at 60Hz
(II) fglrx(0): 640x480 at 67Hz
(II) fglrx(0): 640x480 at 72Hz
(II) fglrx(0): 640x480 at 75Hz
(II) fglrx(0): 800x600 at 56Hz
(II) fglrx(0): 800x600 at 60Hz
(II) fglrx(0): 800x600 at 72Hz
(II) fglrx(0): 800x600 at 75Hz
(II) fglrx(0): 832x624 at 75Hz
(II) fglrx(0): 1024x768 at 60Hz
(II) fglrx(0): 1024x768 at 70Hz
(II) fglrx(0): 1024x768 at 75Hz
(II) fglrx(0): 1280x1024 at 75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 135.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Serial No: 6CL8017114
(II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
(II) fglrx(0): Monitor name: ASUS MM19S
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff000469e319da420000
(II) fglrx(0): 3210010368261e782ae444a45b4c9d24
(II) fglrx(0): 144f57bfef0081800101010101010101
(II) fglrx(0): 010101010101bc34009851002a401090
(II) fglrx(0): 1300782d1100001e000000ff0036434c
(II) fglrx(0): 383031373131340a2020000000fd0037
(II) fglrx(0): 4b1e530e000a202020202020000000fc
(II) fglrx(0): 0041535553204d4d3139530a20200043
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output DFP3 connected
(II) fglrx(0): Output DFP4 disconnected
(II) fglrx(0): Output CRT1 connected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output DFP3 using initial mode 1920x1080
(II) fglrx(0): Output CRT1 using initial mode 1280x1024
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Eyefinity capable adapter detected.
(II) fglrx(0): Adapter ATI Radeon HD 5700 Series has 3 configurable heads and 2 displays connected.
(WW) fglrx(0): Big Desktop related functionalities are replaced by RandR 1.2!
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 16, (OK)
ukiOpenByBusid: ukiOpenMinor returns 16
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f662f9dd000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.77.5
(II) fglrx(0): Date: Aug 25 2010
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.35.2
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x02a30000
(II) fglrx(0): FBMM initialized for area (0,0)-(3200,3456)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(3200,3200) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 3200 x 256
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 592
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): User Preference Output DFP3 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output CRT1 using refresh rate 75.0 Hz.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 846 x 285
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Trust Webcam (/dev/input/event5)
(**) Trust Webcam: Applying InputClass "evdev keyboard catchall"
(**) Trust Webcam: always reports core events
(**) Trust Webcam: Device: "/dev/input/event5"
(II) Trust Webcam: Found keys
(II) Trust Webcam: Configuring as keyboard
(II) XINPUT: Adding extended input device "Trust Webcam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
(**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event2"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
(**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
(**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event3"
(II) Logitech USB Receiver: Found 12 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found absolute axes
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) Logitech USB Receiver: initialized for relative axes.
(WW) Logitech USB Receiver: ignoring absolute axes.
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) fglrx(0): EDID vendor "ACI", prod id 6627
(II) fglrx(0): Using EDID range info for horizontal sync
(II) fglrx(0): Using EDID range info for vertical refresh
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): EDID vendor "ACI", prod id 6627
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): EDID vendor "ACI", prod id 6627
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): EDID vendor "ACI", prod id 6627
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.35.2 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C)
Shell: /bin/sh linked to /bin/dash
Versions of packages fglrx-glx depends on:
ii fglrx-driver 1:10-9-3 non-free AMD/ATI r6xx - r7xx displ
ii libc6 2.11.2-6+squeeze1 Embedded GNU C Library: Shared lib
ii libxext6 2:1.1.2-1 X11 miscellaneous extension librar
fglrx-glx recommends no packages.
fglrx-glx suggests no packages.
-- no debconf information
--
While various networks have become deeply rooted, and thoughts have been
sent out as light and electrons in a singular direction, this era has
yet to digitize/computerize to the degree necessary for individuals to
become a singular complex entity.
KOUKAKU KIDOUTAI Stand Alone Complex
More information about the Pkg-fglrx-devel
mailing list