[Pkg-fglrx-devel] r383 - in fglrx-driver/trunk/debian: . man
Michael Gilbert
gilbert-guest at alioth.debian.org
Sun Mar 21 20:35:18 UTC 2010
Author: gilbert-guest
Date: 2010-03-21 20:35:18 +0000 (Sun, 21 Mar 2010)
New Revision: 383
Removed:
fglrx-driver/trunk/debian/man/Makefile.in
fglrx-driver/trunk/debian/man/NEWS.html
fglrx-driver/trunk/debian/man/aclocal.m4
fglrx-driver/trunk/debian/man/configure
fglrx-driver/trunk/debian/man/install-sh
fglrx-driver/trunk/debian/man/missing
Modified:
fglrx-driver/trunk/debian/changelog
fglrx-driver/trunk/debian/control
fglrx-driver/trunk/debian/man/Makefile.am
fglrx-driver/trunk/debian/man/NEWS
fglrx-driver/trunk/debian/man/autogen.sh
fglrx-driver/trunk/debian/rules
Log:
use automake/autogen to generate manpage build system
Modified: fglrx-driver/trunk/debian/changelog
===================================================================
--- fglrx-driver/trunk/debian/changelog 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/changelog 2010-03-21 20:35:18 UTC (rev 383)
@@ -4,8 +4,10 @@
- Upstream 8.721 pre-release tarball copied directly from Ubuntu, thanks!
- Now supports xorg 7.5!
* Remove fglrxrc manpage since there is no fglrxrc binary anymore.
- * Reference ATI FAQ for supported hardware in fglrx manpage (too hard to
+ * Add link to ATI FAQ for supported hardware in fglrx manpage (too hard to
keep up to date otherwise).
+ * Use automake/autogen to generate manpage build system.
+ - Remove a lot of automatically generated files from packaging.
-- Michael Gilbert <michael.s.gilbert at gmail.com> Sun, 21 Mar 2010 14:49:38 -0400
Modified: fglrx-driver/trunk/debian/control
===================================================================
--- fglrx-driver/trunk/debian/control 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/control 2010-03-21 20:35:18 UTC (rev 383)
@@ -6,7 +6,7 @@
Build-Depends: debhelper (>= 7), quilt, bzip2, ia32-libs [amd64], libx11-6, libxext6,
libgl1-mesa-glx, libxrandr2, libice6, libsm6, libfontconfig1, libxi6, libxcursor1,
xsltproc, rpl, docbook-xml (>= 4.4), docbook-xsl (>= 1.70.1), libxinerama-dev,
- libqt4-dev, chrpath
+ libqt4-dev, chrpath, autogen, automake
Standards-Version: 3.8.4
Vcs-Svn: svn://svn.debian.org/svn/pkg-fglrx/fglrx-driver/trunk
Vcs-Browser: http://svn.debian.org/wsvn/pkg-fglrx/fglrx-driver/trunk
Modified: fglrx-driver/trunk/debian/man/Makefile.am
===================================================================
--- fglrx-driver/trunk/debian/man/Makefile.am 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/man/Makefile.am 2010-03-21 20:35:18 UTC (rev 383)
@@ -91,11 +91,6 @@
$(XSLTPROC) $(XSLTPROC_FLAGS) -o $@ $^
-NEWS : NEWS.html
- @echo -e "\033[1mBuilding $@.\033[0m"
- `which w3m` -dump $< > $@
-
-
check-local:
$(info "Correct any errors before making a distribution.")
if ENABLE_BUILD_CHECKS
Deleted: fglrx-driver/trunk/debian/man/Makefile.in
===================================================================
--- fglrx-driver/trunk/debian/man/Makefile.in 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/man/Makefile.in 2010-03-21 20:35:18 UTC (rev 383)
@@ -1,654 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-
-# Document $WgDD: fglrx_man/Makefile.am,v 1.35 2007-06-02 12:51:31 dleidert Exp $
-# Summary Makefile for the fglrx_man project. It converts the XML source
-# into manpages and installs them into the right location.
-#
-# Copyright (C) 2006,2007 Daniel Leidert <daniel.leidert at wgdd.de>.
-#
-# This file is free software. The copyright owner gives unlimited
-# permission to copy, distribute and modify it.
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/fglrx_html_stylesheet.xsl.in \
- $(srcdir)/fglrx_man_entities.dtd.in \
- $(srcdir)/fglrx_man_stylesheet.xsl.in $(top_srcdir)/configure \
- AUTHORS COPYING ChangeLog INSTALL NEWS THANKS TODO install-sh \
- missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES = fglrx_man_entities.dtd fglrx_html_stylesheet.xsl \
- fglrx_man_stylesheet.xsl
-SOURCES =
-DIST_SOURCES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(fglrxdocsdir)" \
- "$(DESTDIR)$(fglrxman1dir)" "$(DESTDIR)$(fglrxman1xdir)" \
- "$(DESTDIR)$(fglrxman4xdir)" "$(DESTDIR)$(fglrxman5xdir)"
-fglrxdocsDATA_INSTALL = $(INSTALL_DATA)
-fglrxman1DATA_INSTALL = $(INSTALL_DATA)
-fglrxman1xDATA_INSTALL = $(INSTALL_DATA)
-fglrxman4xDATA_INSTALL = $(INSTALL_DATA)
-fglrxman5xDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(fglrxdocs_DATA) $(fglrxman1_DATA) $(fglrxman1x_DATA) \
- $(fglrxman4x_DATA) $(fglrxman5x_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-VPATH = @srcdir@ @builddir@
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-ATI_DRIVER_NAME = @ATI_DRIVER_NAME@
-ATI_DRIVER_PACKAGE = @ATI_DRIVER_PACKAGE@
-ATI_DRIVER_VERSION = @ATI_DRIVER_VERSION@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DRIVER_PACKAGE = @DRIVER_PACKAGE@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LICENSE_FILE = @LICENSE_FILE@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MAN = @MAN@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_LICENSE_FILE = @PACKAGE_LICENSE_FILE@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_DOCBOOK_XSL = @PATH_DOCBOOK_XSL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PATH_XSERVER_MAN_APP = @PATH_XSERVER_MAN_APP@
-PATH_XSERVER_MAN_DRIVER = @PATH_XSERVER_MAN_DRIVER@
-PATH_XSERVER_MAN_FILE = @PATH_XSERVER_MAN_FILE@
-PKG_CONFIG = @PKG_CONFIG@
-PROG_XSERVER_CONF = @PROG_XSERVER_CONF@
-PROG_XSERVER_CONFIG = @PROG_XSERVER_CONFIG@
-PROG_XSERVER_NAME = @PROG_XSERVER_NAME@
-PROG_XSERVER_STRING = @PROG_XSERVER_STRING@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-XMLCATALOG = @XMLCATALOG@
-XMLLINT = @XMLLINT@
-XMLLINT_FLAGS = @XMLLINT_FLAGS@ --noout --path "$(VPATH)" --valid
-XML_CATALOG_FILE = @XML_CATALOG_FILE@
-XSLTPROC = @XSLTPROC@
-XSLTPROC_FLAGS = @XSLTPROC_FLAGS@ --path "$(VPATH)"
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = dist-bzip2 1.7
-EXTRA_DIST = \
- CHIPLIST \
- NEWS.html \
- $(fglrx_man_src) \
- fglrx_man_history.xml \
- fglrx_html.xsl \
- fglrx_man.xsl \
- fglrx_man.css
-
-CLEANFILES = \
- $(fglrxman1_DATA) \
- $(fglrxman1x_DATA) \
- $(fglrxman4x_DATA) \
- $(fglrxman5x_DATA) \
- $(fglrx_man_src:.xml=.html)
-
-DISTCLEANFILES = \
- fglrx_man_entities.dtd \
- fglrx_html_stylesheet.xsl \
- fglrx_man_stylesheet.xsl
-
-MAINTAINERCLEANFILES = \
- aclocal.m4 \
- configure \
- install-sh \
- missing \
- mkinstalldirs \
- Makefile.in \
- NEWS \
- NEWS.html \
- @PACKAGE at -@VERSION at .tar.gz \
- @PACKAGE at -@VERSION at .tar.bz2
-
-DISTCHECK_CONFIGURE_FLAGS = \
- --enable-build-checks \
- --with-docbook-xsl-dir=http://docbook.sourceforge.net/release/xsl/current
-
-fglrx_man_src = \
- fireglcontrol.1.xml \
- aticonfig.1x.xml \
- fgl_glxgears.1x.xml \
- fglrxinfo.1x.xml \
- fglrx_xgamma.1x.xml \
- fglrx.4x.xml \
- atiode.1x.xml \
- atiodcli.1x.xml
-
-fglrxman1dir = $(mandir)/man1
-fglrxman1_DATA = $(patsubst %.1.xml,%.1,$(filter %.1.xml,$(fglrx_man_src)))
-fglrxman1xdir = $(PATH_XSERVER_MAN_APP)
-fglrxman1x_DATA = $(patsubst %.1x.xml,%.1x,$(filter %.1x.xml,$(fglrx_man_src)))
-fglrxman4xdir = $(PATH_XSERVER_MAN_DRIVER)
-fglrxman4x_DATA = $(patsubst %.4x.xml,%.4x,$(filter %.4x.xml,$(fglrx_man_src)))
-fglrxman5xdir = $(PATH_XSERVER_MAN_FILE)
-fglrxman5x_DATA = $(patsubst %.5x.xml,%.5x,$(filter %.5x.xml,$(fglrx_man_src)))
-fglrxdocsdir = $(datadir)/doc/fglrx_man
-fglrxdocs_DATA = $(fglrx_man_src:.xml=.html) fglrx_man.css AUTHORS CHIPLIST COPYING NEWS.html THANKS NEWS
-all: all-am
-
-.SUFFIXES:
-am--refresh:
- @:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
- cd $(srcdir) && $(AUTOMAKE) --gnu \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-fglrx_man_entities.dtd: $(top_builddir)/config.status $(srcdir)/fglrx_man_entities.dtd.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-fglrx_html_stylesheet.xsl: $(top_builddir)/config.status $(srcdir)/fglrx_html_stylesheet.xsl.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-fglrx_man_stylesheet.xsl: $(top_builddir)/config.status $(srcdir)/fglrx_man_stylesheet.xsl.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-install-fglrxdocsDATA: $(fglrxdocs_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(fglrxdocsdir)" || $(MKDIR_P) "$(DESTDIR)$(fglrxdocsdir)"
- @list='$(fglrxdocs_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(fglrxdocsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(fglrxdocsdir)/$$f'"; \
- $(fglrxdocsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(fglrxdocsdir)/$$f"; \
- done
-
-uninstall-fglrxdocsDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(fglrxdocs_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(fglrxdocsdir)/$$f'"; \
- rm -f "$(DESTDIR)$(fglrxdocsdir)/$$f"; \
- done
-install-fglrxman1DATA: $(fglrxman1_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(fglrxman1dir)" || $(MKDIR_P) "$(DESTDIR)$(fglrxman1dir)"
- @list='$(fglrxman1_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(fglrxman1DATA_INSTALL) '$$d$$p' '$(DESTDIR)$(fglrxman1dir)/$$f'"; \
- $(fglrxman1DATA_INSTALL) "$$d$$p" "$(DESTDIR)$(fglrxman1dir)/$$f"; \
- done
-
-uninstall-fglrxman1DATA:
- @$(NORMAL_UNINSTALL)
- @list='$(fglrxman1_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(fglrxman1dir)/$$f'"; \
- rm -f "$(DESTDIR)$(fglrxman1dir)/$$f"; \
- done
-install-fglrxman1xDATA: $(fglrxman1x_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(fglrxman1xdir)" || $(MKDIR_P) "$(DESTDIR)$(fglrxman1xdir)"
- @list='$(fglrxman1x_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(fglrxman1xDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(fglrxman1xdir)/$$f'"; \
- $(fglrxman1xDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(fglrxman1xdir)/$$f"; \
- done
-
-uninstall-fglrxman1xDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(fglrxman1x_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(fglrxman1xdir)/$$f'"; \
- rm -f "$(DESTDIR)$(fglrxman1xdir)/$$f"; \
- done
-install-fglrxman4xDATA: $(fglrxman4x_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(fglrxman4xdir)" || $(MKDIR_P) "$(DESTDIR)$(fglrxman4xdir)"
- @list='$(fglrxman4x_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(fglrxman4xDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(fglrxman4xdir)/$$f'"; \
- $(fglrxman4xDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(fglrxman4xdir)/$$f"; \
- done
-
-uninstall-fglrxman4xDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(fglrxman4x_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(fglrxman4xdir)/$$f'"; \
- rm -f "$(DESTDIR)$(fglrxman4xdir)/$$f"; \
- done
-install-fglrxman5xDATA: $(fglrxman5x_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(fglrxman5xdir)" || $(MKDIR_P) "$(DESTDIR)$(fglrxman5xdir)"
- @list='$(fglrxman5x_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(fglrxman5xDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(fglrxman5xdir)/$$f'"; \
- $(fglrxman5xDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(fglrxman5xdir)/$$f"; \
- done
-
-uninstall-fglrxman5xDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(fglrxman5x_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(fglrxman5xdir)/$$f'"; \
- rm -f "$(DESTDIR)$(fglrxman5xdir)/$$f"; \
- done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d $(distdir) || mkdir $(distdir)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
- $(MAKE) $(AM_MAKEFLAGS) check-local
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
- for dir in "$(DESTDIR)$(fglrxdocsdir)" "$(DESTDIR)$(fglrxman1dir)" "$(DESTDIR)$(fglrxman1xdir)" "$(DESTDIR)$(fglrxman4xdir)" "$(DESTDIR)$(fglrxman5xdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-fglrxdocsDATA install-fglrxman1DATA \
- install-fglrxman1xDATA install-fglrxman4xDATA \
- install-fglrxman5xDATA
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-fglrxdocsDATA uninstall-fglrxman1DATA \
- uninstall-fglrxman1xDATA uninstall-fglrxman4xDATA \
- uninstall-fglrxman5xDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am am--refresh check check-am check-local clean \
- clean-generic dist dist-all dist-bzip2 dist-gzip dist-shar \
- dist-tarZ dist-zip distcheck distclean distclean-generic \
- distcleancheck distdir distuninstallcheck dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-fglrxdocsDATA install-fglrxman1DATA \
- install-fglrxman1xDATA install-fglrxman4xDATA \
- install-fglrxman5xDATA install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am uninstall uninstall-am uninstall-fglrxdocsDATA \
- uninstall-fglrxman1DATA uninstall-fglrxman1xDATA \
- uninstall-fglrxman4xDATA uninstall-fglrxman5xDATA
-
-
-% : fglrx_man.xsl %.xml
- @echo -e "\033[1mBuilding $*.\033[0m"
- $(XSLTPROC) $(XSLTPROC_FLAGS) $^
-
-%.html : fglrx_html.xsl %.xml
- @echo -e "\033[1mBuilding $@.\033[0m"
- $(XSLTPROC) $(XSLTPROC_FLAGS) -o $@ $^
-
-NEWS.html : fglrx_html.xsl fglrx_man_history.xml
- @echo -e "\033[1mBuilding $@.\033[0m"
- $(XSLTPROC) $(XSLTPROC_FLAGS) -o $@ $^
-
-NEWS : NEWS.html
- @echo -e "\033[1mBuilding $@.\033[0m"
- `which w3m` -dump $< > $@
-
-check-local:
- $(info "Correct any errors before making a distribution.")
- at ENABLE_BUILD_CHECKS_TRUE@ @echo -e "\033[1mChecking XML sources.\033[0m"
- at ENABLE_BUILD_CHECKS_TRUE@ $(XMLLINT) $(XMLLINT_FLAGS) $(fglrx_man_src) fglrx_man_history.xml
- at ENABLE_BUILD_CHECKS_TRUE@ @echo -e "\033[1mChecking manpages for issues.\033[0m"
- at ENABLE_BUILD_CHECKS_TRUE@ LANG=C MANWIDTH=80 $(MAN) $(addprefix ./,$(patsubst %.xml,%,$(fglrx_man_src))) > /dev/null
-# TODO: Add spell check:
-# ispell -d american -n ...groff files...
- at ENABLE_BUILD_CHECKS_FALSE@ $(info "Use --enable-build-checks to enable the check-target(s).")
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Modified: fglrx-driver/trunk/debian/man/NEWS
===================================================================
--- fglrx-driver/trunk/debian/man/NEWS 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/man/NEWS 2010-03-21 20:35:18 UTC (rev 383)
@@ -2,7 +2,7 @@
Revision 8.32.5 2006-12-13 dale, ATI Technologies Inc.
New upstream release ATI Proprietary Linux Driver Version 8.32.5.
- * See the file ChangeLog.
+ â— See the file ChangeLog.
Revision 8.28.8 2006-08-18 dale, ATI Technologies Inc.
New upstream release ATI Proprietary Linux Driver Version 8.28.8.
@@ -11,43 +11,43 @@
Versions 8.25.18, 8.26.18 and 8.27.10, this ChangeLog is quite long.
[Important] Important
- Be aware, that this driver is the last with support for RADEON®
- 8500/9000/9100/9200/9250, MOBILITY? RADEON® 9000/9100/9200 and
- RADEON® IGP 9000/9100/9200 chipsets.
+ Be aware, that this driver is the last with support for RADEON®
+ 8500/9000/9100/9200/9250, MOBILITY™ RADEON® 9000/9100/9200 and
+ RADEON® IGP 9000/9100/9200 chipsets.
General changes:
- * The license has changed to a MIT license.
+ â— The license has changed to a MIT license.
- * Updated the list of supported chipsets.
+ â— Updated the list of supported chipsets.
- * Fixed many build issues and improved the build system in several ways.
+ â— Fixed many build issues and improved the build system in several ways.
- * Added a XML-based revision history and dropped the plain-text based one
+ â— Added a XML-based revision history and dropped the plain-text based one
(this means, that there is still a text version, but it's created from the
XML file and a HTML version was added).
- * Fixed format issues in all manpages, that clashed with the format
+ â— Fixed format issues in all manpages, that clashed with the format
recommendations of manpages.
- * Fixed many markup issues in aticonfig(1x), fgl_glxgears(1x), fglrxinfo(1x),
+ â— Fixed many markup issues in aticonfig(1x), fgl_glxgears(1x), fglrxinfo(1x),
fglrx_xgamma(1x) and fglrx(4x).
- * Fixed several typos in aticonfig(1x) and fglrx(4x).
+ â— Fixed several typos in aticonfig(1x) and fglrx(4x).
- * The HTML form of the manpages now uses HTML 4.01 transitional.
+ â— The HTML form of the manpages now uses HTML 4.01 transitional.
Special changes for aticonfig(1x):
- * Fixed copyright.
+ â— Fixed copyright.
- * Added some information if and how options affect the configuration file
+ â— Added some information if and how options affect the configuration file
(taken from aticonfig --help output).
- * Added some general section descriptions based on the information given by
+ â— Added some general section descriptions based on the information given by
the --help of aticonfig(1x).
- * Added the description for the newly introduced options:
+ â— Added the description for the newly introduced options:
--add-pairmode
--enable-monitor
@@ -65,48 +65,48 @@
with descriptions.
- * Improved and updated the description for the options:
+ â— Improved and updated the description for the options:
--initial
--tvf,--tv-format-type
-o, --output
- * Removed the description for the no longer available options:
+ â— Removed the description for the no longer available options:
--agpl, --agp-locked-userpages
--dw,--disable-workstation
--iagp, --internal-agp
- * Removed solved or obsolete bugs:
+ â— Removed solved or obsolete bugs:
- o The --tv-format-type option does not longer try to manipulate the
+ â—‹ The --tv-format-type option does not longer try to manipulate the
Option "TVStandard" value of fglrx(4x).
- o Trying to use --dw timmo-extreme returns the following error message:
- ?aticonfig: parsing the command-line failed?.
+ â—‹ Trying to use --dw timmo-extreme returns the following error message:
+ “aticonfig: parsing the command-line failedâ€.
Added newly observed bugs:
- o The --tvf option does not accept all values mentioned in the --help
+ â—‹ The --tvf option does not accept all values mentioned in the --help
output.
- o The --tv-info option could freeze with 100% CPU usage.
+ â—‹ The --tv-info option could freeze with 100% CPU usage.
- o The --tv-geometry may break the configuration file or output a wrong
+ â—‹ The --tv-geometry may break the configuration file or output a wrong
error message.
- o The --help output is wrong in a few cases.
+ â—‹ The --help output is wrong in a few cases.
- Check the ?BUGS? section of aticonfig(1x) for more information.
+ Check the “BUGS†section of aticonfig(1x) for more information.
Special changes for fglrx(4x):
- * Fixed copyright.
+ â— Fixed copyright.
- * Updated, sorted and reorganized the list of supported chipsets and their
+ â— Updated, sorted and reorganized the list of supported chipsets and their
supported features.
- * Added new explanations for the options:
+ â— Added new explanations for the options:
Option "MaxGARTSize"
Option "TVOverscan"
@@ -122,7 +122,7 @@
Special changes for fglrxrc(5):
- * Added the involved files, this manpage is about.
+ â— Added the involved files, this manpage is about.
New driver options (may be incomplete):
@@ -147,12 +147,12 @@
Changes:
- * Added newly supported chipsets for RADEON X1x000 products to fglrx(4x).
+ â— Added newly supported chipsets for RADEON X1x000 products to fglrx(4x).
- * Removed fglrxconfig(1x) from Makefile. This file is not longer shipped with
+ â— Removed fglrxconfig(1x) from Makefile. This file is not longer shipped with
the driver. All references to this application were removed.
- * Make it compatible with X.org 7 (left the suffixes as suggested by the
+ â— Make it compatible with X.org 7 (left the suffixes as suggested by the
http://webcvs.freedesktop.org/xorg/util/macros/xorg-macros.m4 macro).
Revision 8.23.7 2006-03-08 dale, ATI Technologies Inc.
@@ -160,7 +160,7 @@
Changes:
- * Added newly supported chipsets to fglrx(4x).
+ â— Added newly supported chipsets to fglrx(4x).
Revision 8.22.5 2006-02-08 ATI Technologies Inc.
New upstream release ATI Proprietary Linux Driver Version 8.22.5.
Deleted: fglrx-driver/trunk/debian/man/NEWS.html
===================================================================
--- fglrx-driver/trunk/debian/man/NEWS.html 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/man/NEWS.html 2010-03-21 20:35:18 UTC (rev 383)
@@ -1,259 +0,0 @@
-<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html>
-<head>
-<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-<title></title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.73.2">
-</head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="revhistory"><table border="0" width="100%" summary="Revision history">
-<tr><th align="left" valign="top" colspan="3"><b>Revision History</b></th></tr>
-<tr>
-<td align="left">Revision 8.32.5</td>
-<td align="left">2006-12-13</td>
-<td align="left">dale, <span class="author"><span class="othername">ATI Technologies Inc.</span></span>
-</td>
-</tr>
-<tr><td align="left" colspan="3">
- <a name="revision_8_32_5"></a>
- <p>New upstream release <a class="ulink" href="http://www2.ati.com/drivers/linux/linux_8.32.5.html" target="_top">ATI Proprietary Linux Driver Version 8.32.5</a>.</p>
- <div class="itemizedlist"><ul type="disc"><li><p>See the file <code class="filename">ChangeLog</code>.</p></li></ul></div>
- </td></tr>
-<tr>
-<td align="left">Revision 8.28.8</td>
-<td align="left">2006-08-18</td>
-<td align="left">dale, <span class="author"><span class="othername">ATI Technologies Inc.</span></span>
-</td>
-</tr>
-<tr><td align="left" colspan="3">
- <a name="revision_8_28_8"></a>
- <p>New upstream release <a class="ulink" href="http://www2.ati.com/drivers/linux/linux_8.28.8.html" target="_top">ATI Proprietary Linux Driver Version 8.28.8</a>.</p>
- <p>Because I did not made manpage releases for ATI Proprietary Linux Driver Versions <a class="link" href="#revision_8_25_18">8.25.18</a>, <a class="link" href="#revision_8_26_18">8.26.18</a> and <a class="link" href="#revision_8_27_10">8.27.10</a>, this ChangeLog is quite long.</p>
- <div class="important"><table border="0" summary="Important">
-<tr>
-<td rowspan="2" align="center" valign="top" width="25"><img alt="[Important]" src="http://docbook.sourceforge.net/release/xsl/current/images/important.png"></td>
-<th align="left">Important</th>
-</tr>
-<tr><td align="left" valign="top"><p><span class="bold"><strong>Be aware, that this driver is the last with support for <span class="productname">RADEON</span>® 8500/9000/9100/9200/9250, <span class="productname">MOBILITY</span>™ <span class="productname">RADEON</span>® 9000/9100/9200 and <span class="productname">RADEON</span>® IGP 9000/9100/9200 chipsets.</strong></span></p></td></tr>
-</table></div>
- <div class="itemizedlist">
-<p>General changes:</p>
-<ul type="disc">
-<li><p><span class="bold"><strong>The license has changed to a MIT license.</strong></span></p></li>
-<li><p>Updated the list of supported chipsets.</p></li>
-<li><p>Fixed many build issues and improved the build system in several ways.</p></li>
-<li><p>Added a XML-based revision history and dropped the plain-text based one (this means, that there is still a text version, but it's created from the XML file and a HTML version was added).</p></li>
-<li><p>Fixed format issues in all manpages, that clashed with the format recommendations of manpages.</p></li>
-<li><p>Fixed many markup issues in <span class="citerefentry"><span class="refentrytitle">aticonfig</span>(1x)</span>, <span class="citerefentry"><span class="refentrytitle">fgl_glxgears</span>(1x)</span>, <span class="citerefentry"><span class="refentrytitle">fglrxinfo</span>(1x)</span>, <span class="citerefentry"><span class="refentrytitle">fglrx_xgamma</span>(1x)</span> and <span class="citerefentry"><span class="refentrytitle">fglrx</span>(4x)</span>.</p></li>
-<li><p>Fixed several typos in <span class="citerefentry"><span class="refentrytitle">aticonfig</span>(1x)</span> and <span class="citerefentry"><span class="refentrytitle">fglrx</span>(4x)</span>.</p></li>
-<li><p>The HTML form of the manpages now uses HTML 4.01 transitional.</p></li>
-</ul>
-</div>
- <div class="itemizedlist">
-<p>Special changes for <span class="citerefentry"><span class="refentrytitle">aticonfig</span>(1x)</span>:</p>
-<ul type="disc">
-<li><p>Fixed copyright.</p></li>
-<li><p>Added some information if and how options affect the configuration file (taken from <span class="command"><strong>aticonfig --help</strong></span> output).</p></li>
-<li><p>Added some general section descriptions based on the information given by the <code class="option">--help</code> of <span class="citerefentry"><span class="refentrytitle">aticonfig</span>(1x)</span>.</p></li>
-<li>
-<p>Added the description for the newly introduced options: </p>
-<table class="simplelist" border="0" summary="Simple list">
-<tr><td><code class="option">--add-pairmode</code></td></tr>
-<tr><td><code class="option">--enable-monitor</code></td></tr>
-<tr><td><code class="option">--list-pairmode</code></td></tr>
-<tr><td><code class="option">--locked-userpages</code></td></tr>
-<tr><td><code class="option">--max-gart-size</code></td></tr>
-<tr><td><code class="option">--nobackup</code></td></tr>
-<tr><td><code class="option">--query-monitor</code></td></tr>
-<tr><td><code class="option">--remove-pairmode</code></td></tr>
-<tr><td><code class="option">--swap-monitor</code></td></tr>
-<tr><td><code class="option">--set-policy</code></td></tr>
-<tr><td><code class="option">--tv-geometry</code></td></tr>
-<tr><td><code class="option">--tv-info</code></td></tr>
-<tr><td><code class="option">--tv-overscan</code></td></tr>
-</table>
-<p> with descriptions.
- </p>
-</li>
-<li>
-<p>Improved and updated the description for the options: </p>
-<table class="simplelist" border="0" summary="Simple list">
-<tr><td><code class="option">--initial</code></td></tr>
-<tr><td>
-<code class="option">--tvf</code>,<code class="option">--tv-format-type</code>
-</td></tr>
-<tr><td>
-<code class="option">-o</code>, <code class="option">--output</code>
-</td></tr>
-</table>
-<p>
- </p>
-</li>
-<li>
-<p>Removed the description for the no longer available options: </p>
-<table class="simplelist" border="0" summary="Simple list">
-<tr><td>
-<code class="option">--agpl</code>, <code class="option">--agp-locked-userpages</code>
-</td></tr>
-<tr><td>
-<code class="option">--dw</code>,<code class="option">--disable-workstation</code>
-</td></tr>
-<tr><td>
-<code class="option">--iagp</code>, <code class="option">--internal-agp</code>
-</td></tr>
-</table>
-<p>
- </p>
-</li>
-<li>
-<p>Removed solved or obsolete bugs: </p>
-<div class="itemizedlist"><ul type="circle">
-<li><p>The <code class="option">--tv-format-type</code> option does not longer try to manipulate the <code class="option">Option "TVStandard"</code> value of <span class="citerefentry"><span class="refentrytitle">fglrx</span>(4x)</span>.</p></li>
-<li><p>Trying to use <code class="option">--dw timmo-extreme</code> returns the following error message: “<span class="quote"><span class="errortext">aticonfig: parsing the command-line failed</span></span>”.</p></li>
-</ul></div>
-<p>
- </p>
-<p>Added newly observed bugs: </p>
-<div class="itemizedlist"><ul type="circle">
-<li><p>The <code class="option">--tvf</code> option does not accept all values mentioned in the <code class="option">--help</code> output.</p></li>
-<li><p>The <code class="option">--tv-info</code> option could freeze with 100% CPU usage.</p></li>
-<li><p>The <code class="option">--tv-geometry</code> may break the configuration file or output a wrong error message.</p></li>
-<li><p>The <code class="option">--help</code> output is wrong in a few cases.</p></li>
-</ul></div>
-<p>
- </p>
-<p>Check the “<span class="quote">BUGS</span>” section of <span class="citerefentry"><span class="refentrytitle">aticonfig</span>(1x)</span> for more information.</p>
-</li>
-</ul>
-</div>
- <div class="itemizedlist">
-<p>Special changes for <span class="citerefentry"><span class="refentrytitle">fglrx</span>(4x)</span>:</p>
-<ul type="disc">
-<li><p>Fixed copyright.</p></li>
-<li><p>Updated, sorted and reorganized the list of supported chipsets and their supported features.</p></li>
-<li>
-<p>Added new explanations for the options: </p>
-<table class="simplelist" border="0" summary="Simple list">
-<tr><td><code class="option">Option "MaxGARTSize"</code></td></tr>
-<tr><td><code class="option">Option "TVOverscan"</code></td></tr>
-</table>
-<p>
- </p>
-<p>Updated and improved explanations for the options: </p>
-<table class="simplelist" border="0" summary="Simple list">
-<tr><td><code class="option">Option "ForceMonitors"</code></td></tr>
-<tr><td><code class="option">Option "TVFormat"</code></td></tr>
-<tr><td><code class="option">Option "TVHPosAdj"</code></td></tr>
-<tr><td><code class="option">Option "TVHSizeAdj"</code></td></tr>
-<tr><td><code class="option">Option "TVVPosAdj"</code></td></tr>
-<tr><td><code class="option">Option "TVVSizeAdj"</code></td></tr>
-</table>
-<p>
- </p>
-</li>
-</ul>
-</div>
- <div class="itemizedlist">
-<p>Special changes for <span class="citerefentry"><span class="refentrytitle">fglrxrc</span>(5)</span>:</p>
-<ul type="disc"><li><p>Added the involved files, this manpage is about.</p></li></ul>
-</div>
- <p>New driver options (may be incomplete): </p>
-<table class="simplelist" border="0" summary="Simple list">
-<tr><td><code class="option">Option "EnableMonitor"</code></td></tr>
-<tr><td><code class="option">Option "MaxGARTSize"</code></td></tr>
-<tr><td><code class="option">Option "PairModes"</code></td></tr>
-<tr><td><code class="option">Option "TVOverscan"</code></td></tr>
-</table>
-<p>
- </p>
- <p>Obsoleted driver options (may be incomplete): unknown</p>
- </td></tr>
-<tr>
-<td align="left">Revision 8.27.10</td>
-<td align="left">2006-07-27</td>
-<td align="left"><span class="author"><span class="othername">ATI Technologies Inc.</span></span></td>
-</tr>
-<tr><td align="left" colspan="3">
- <a name="revision_8_27_10"></a>
- <p>New upstream release <a class="ulink" href="http://www2.ati.com/drivers/linux/linux_8.27.10.html" target="_top">ATI Proprietary Linux Driver Version 8.27.10</a>.</p>
- </td></tr>
-<tr>
-<td align="left">Revision 8.26.18</td>
-<td align="left">2006-06-26</td>
-<td align="left"><span class="author"><span class="othername">ATI Technologies Inc.</span></span></td>
-</tr>
-<tr><td align="left" colspan="3">
- <a name="revision_8_26_18"></a>
- <p>New upstream release <a class="ulink" href="http://www2.ati.com/drivers/linux/linux_8.26.18.html" target="_top">ATI Proprietary Linux Driver Version 8.26.18</a>.</p>
- </td></tr>
-<tr>
-<td align="left">Revision 8.25.18</td>
-<td align="left">2006-05-24</td>
-<td align="left"><span class="author"><span class="othername">ATI Technologies Inc.</span></span></td>
-</tr>
-<tr><td align="left" colspan="3">
- <a name="revision_8_25_18"></a>
- <p>New upstream release <a class="ulink" href="http://www2.ati.com/drivers/linux/linux_8.25.18.html" target="_top">ATI Proprietary Linux Driver Version 8.25.18</a>.</p>
- </td></tr>
-<tr>
-<td align="left">Revision 8.24.8</td>
-<td align="left">2006-04-12</td>
-<td align="left">dale, <span class="author"><span class="othername">ATI Technologies Inc.</span></span>
-</td>
-</tr>
-<tr><td align="left" colspan="3">
- <a name="revision_8_24_8"></a>
- <p>New upstream release <a class="ulink" href="http://www2.ati.com/drivers/linux/linux_8.24.8.html" target="_top">ATI Proprietary Linux Driver Version 8.24.8</a>.</p>
- <div class="itemizedlist">
-<p>Changes:</p>
-<ul type="disc">
-<li><p>Added newly supported chipsets for RADEON X1x000 products to <span class="citerefentry"><span class="refentrytitle">fglrx</span>(4x)</span>.</p></li>
-<li><p>Removed <span class="citerefentry"><span class="refentrytitle">fglrxconfig</span>(1x)</span> from Makefile. This file is not longer shipped with the driver. All references to this application were removed.</p></li>
-<li><p>Make it compatible with <span class="package">X.org</span> 7 (left the suffixes as suggested by the <a class="ulink" href="http://webcvs.freedesktop.org/xorg/util/macros/xorg-macros.m4" target="_top">http://webcvs.freedesktop.org/xorg/util/macros/xorg-macros.m4</a> macro).</p></li>
-</ul>
-</div>
- </td></tr>
-<tr>
-<td align="left">Revision 8.23.7</td>
-<td align="left">2006-03-08</td>
-<td align="left">dale, <span class="author"><span class="othername">ATI Technologies Inc.</span></span>
-</td>
-</tr>
-<tr><td align="left" colspan="3">
- <a name="revision_8_23_7"></a>
- <p>New upstream release <a class="ulink" href="http://www2.ati.com/drivers/linux/linux_8.23.7.html" target="_top">ATI Proprietary Linux Driver Version 8.23.7</a>.</p>
- <div class="itemizedlist">
-<p>Changes:</p>
-<ul type="disc"><li><p>Added newly supported chipsets to <span class="citerefentry"><span class="refentrytitle">fglrx</span>(4x)</span>.</p></li></ul>
-</div>
- </td></tr>
-<tr>
-<td align="left">Revision 8.22.5</td>
-<td align="left">2006-02-08</td>
-<td align="left"><span class="author"><span class="othername">ATI Technologies Inc.</span></span></td>
-</tr>
-<tr><td align="left" colspan="3">
- <a name="revision_8_22_5"></a>
- <p>New upstream release <a class="ulink" href="http://www2.ati.com/drivers/linux/linux_8.22.5.html" target="_top">ATI Proprietary Linux Driver Version 8.22.5</a>.</p>
- </td></tr>
-<tr>
-<td align="left">Revision 8.21.7</td>
-<td align="left">2006-01-18</td>
-<td align="left"><span class="author"><span class="othername">ATI Technologies Inc.</span></span></td>
-</tr>
-<tr><td align="left" colspan="3">
- <a name="revision_8_21_7"></a>
- <p>New upstream release <a class="ulink" href="http://www2.ati.com/drivers/linux/linux_8.21.7.html" target="_top">ATI Proprietary Linux Driver Version 8.21.7</a>.</p>
- </td></tr>
-<tr>
-<td align="left">Revision 8.20.8</td>
-<td align="left">2005-12-08</td>
-<td align="left">dale, <span class="author"><span class="othername">ATI Technologies Inc.</span></span>
-</td>
-</tr>
-<tr><td align="left" colspan="3">
- <a name="revision_8_20_8"></a>
- <p>New upstream release <a class="ulink" href="http://www2.ati.com/drivers/linux/linux_8.20.8.html" target="_top">ATI Proprietary Linux Driver Version 8.20.8</a>.</p>
- <p>This is the first official release of the manpages.</p>
- </td></tr>
-</table></div></body>
-</html>
Deleted: fglrx-driver/trunk/debian/man/aclocal.m4
===================================================================
--- fglrx-driver/trunk/debian/man/aclocal.m4 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/man/aclocal.m4 2010-03-21 20:35:18 UTC (rev 383)
@@ -1,1021 +0,0 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_if(m4_PACKAGE_VERSION, [2.61],,
-[m4_fatal([this file was generated for autoconf 2.61.
-You have another version of autoconf. If you want to use that,
-you should regenerate the build system entirely.], [63])])
-
-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
-#
-# Copyright © 2004 Scott James Remnant <scott at netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
-AC_DEFUN([PKG_PROG_PKG_CONFIG],
-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
- AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
-fi
-if test -n "$PKG_CONFIG"; then
- _pkg_min_version=m4_default([$1], [0.9.0])
- AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- PKG_CONFIG=""
- fi
-
-fi[]dnl
-])# PKG_PROG_PKG_CONFIG
-
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists. Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-#
-# Similar to PKG_CHECK_MODULES, make sure that the first instance of
-# this or PKG_CHECK_MODULES is called, or make sure to call
-# PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_EXISTS],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-if test -n "$PKG_CONFIG" && \
- AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
- m4_ifval([$2], [$2], [:])
-m4_ifvaln([$3], [else
- $3])dnl
-fi])
-
-
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
-m4_define([_PKG_CONFIG],
-[if test -n "$PKG_CONFIG"; then
- if test -n "$$1"; then
- pkg_cv_[]$1="$$1"
- else
- PKG_CHECK_EXISTS([$3],
- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
- [pkg_failed=yes])
- fi
-else
- pkg_failed=untried
-fi[]dnl
-])# _PKG_CONFIG
-
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
-
-
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_MODULES],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
-
-pkg_failed=no
-AC_MSG_CHECKING([for $1])
-
-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
-_PKG_CONFIG([$1][_LIBS], [libs], [$2])
-
-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
-and $1[]_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.])
-
-if test $pkg_failed = yes; then
- _PKG_SHORT_ERRORS_SUPPORTED
- if test $_pkg_short_errors_supported = yes; then
- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"`
- else
- $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
-
- ifelse([$4], , [AC_MSG_ERROR(dnl
-[Package requirements ($2) were not met:
-
-$$1_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-_PKG_TEXT
-])],
- [AC_MSG_RESULT([no])
- $4])
-elif test $pkg_failed = untried; then
- ifelse([$4], , [AC_MSG_FAILURE(dnl
-[The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-_PKG_TEXT
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])],
- [$4])
-else
- $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
- $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
- AC_MSG_RESULT([yes])
- ifelse([$3], , :, [$3])
-fi[]dnl
-])# PKG_CHECK_MODULES
-
-# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.10], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 3
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $1 | $1:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([acinclude.m4])
Modified: fglrx-driver/trunk/debian/man/autogen.sh
===================================================================
--- fglrx-driver/trunk/debian/man/autogen.sh 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/man/autogen.sh 2010-03-21 20:35:18 UTC (rev 383)
@@ -23,7 +23,7 @@
AUTOMAKE_VERSION=`$AUTOMAKE --version | grep automake | awk '{print $4}' | awk -F. '{print $1"."$2}'`
## automake files we need to have inside our source
-if [[ $AUTOMAKE_VERSION = "1.7" ]] ; then
+if [ $AUTOMAKE_VERSION = "1.7" ] ; then
AUTOMAKE_FILES="missing mkinstalldirs install-sh"
else
AUTOMAKE_FILES="missing install-sh"
Property changes on: fglrx-driver/trunk/debian/man/autogen.sh
___________________________________________________________________
Added: svn:executable
+ *
Deleted: fglrx-driver/trunk/debian/man/configure
===================================================================
--- fglrx-driver/trunk/debian/man/configure 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/man/configure 2010-03-21 20:35:18 UTC (rev 383)
@@ -1,6278 +0,0 @@
-#! /bin/sh
-# From configure.ac Revision: 1.25 .
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for fglrx-driver 8.32.5.
-#
-# Report bugs to <http://bugs.debian.org/fglrx-driver>.
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
-else
- as_have_required=no
-fi
-
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
- :
-else
- as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- case $as_dir in
- /*)
- for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
- done;;
- esac
-done
-IFS=$as_save_IFS
-
-
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
-fi
-
-
-fi
-
-fi
-
-
-
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell autoconf at gnu.org about your system,
- echo including any error possibly output before this
- echo message
-}
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-
-exec 7<&0 </dev/null 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Identity of this package.
-PACKAGE_NAME='fglrx-driver'
-PACKAGE_TARNAME='fglrx-driver'
-PACKAGE_VERSION='8.32.5'
-PACKAGE_STRING='fglrx-driver 8.32.5'
-PACKAGE_BUGREPORT='http://bugs.debian.org/fglrx-driver'
-
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-am__isrc
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
-install_sh
-STRIP
-INSTALL_STRIP_PROGRAM
-mkdir_p
-AWK
-SET_MAKE
-am__leading_dot
-AMTAR
-am__tar
-am__untar
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-DEPDIR
-am__include
-am__quote
-AMDEP_TRUE
-AMDEP_FALSE
-AMDEPBACKSLASH
-CCDEPMODE
-am__fastdepCC_TRUE
-am__fastdepCC_FALSE
-CPP
-GREP
-EGREP
-ENABLE_BUILD_CHECKS_TRUE
-ENABLE_BUILD_CHECKS_FALSE
-DRIVER_PACKAGE
-ATI_DRIVER_NAME
-ATI_DRIVER_VERSION
-ATI_DRIVER_PACKAGE
-LICENSE_FILE
-PACKAGE_LICENSE_FILE
-XSLTPROC
-XSLTPROC_FLAGS
-PKG_CONFIG
-XMLLINT
-XMLLINT_FLAGS
-MAN
-XMLCATALOG
-XML_CATALOG_FILE
-PATH_DOCBOOK_XSL
-PROG_XSERVER_STRING
-PROG_XSERVER_NAME
-PROG_XSERVER_CONF
-PROG_XSERVER_CONFIG
-PATH_XSERVER_MAN_APP
-PATH_XSERVER_MAN_DRIVER
-PATH_XSERVER_MAN_FILE
-LIBOBJS
-LTLIBOBJS'
-ac_subst_files=''
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP
-DRIVER_PACKAGE
-LICENSE_FILE
-XSLTPROC
-XSLTPROC_FLAGS
-PKG_CONFIG
-XMLLINT
-XMLLINT_FLAGS
-MAN
-XMLCATALOG
-XML_CATALOG_FILE'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
- eval enable_$ac_feature=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
- eval enable_$ac_feature=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
- eval with_$ac_package=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
- eval with_$ac_package=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute directory names.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { echo "$as_me: error: Working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures fglrx-driver 8.32.5 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/fglrx-driver]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of fglrx-driver 8.32.5:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
- --enable-build-checks enable the checks in the check-target (rewuires more
- applications) [default=no (yes for distcheck)]
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-docbook-xsl-dir[=DIR]
- Specify the path to Norman Walsh's XSL stylesheets.
- [DIR=autodetect]
- --with-xserver[=[Xorg|XFree86]]
- Specify, which X-server is used
- [default=autodetect].
- --with-xserver-app-man-dir[=DIR]
- Specify the path, where X application-manpages
- should be installed. [DIR=$mandir/man1]
- --with-xserver-driver-man-dir[=DIR]
- Specify the path, where X driver-manpages should be
- installed. [DIR=$mandir/man4]
- --with-xserver-file-man-dir[=DIR]
- Specify the path, where X file-manpages should be
- installed. [DIR=$mandir/man5]
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
- DRIVER_PACKAGE
- The package string you want to have at the top of the manpage
- instead of the default string [default="Debian GNU/Linux
- fglrx-driver package"].
- LICENSE_FILE
- Change the place, where the license can be found.
- [default="$datadir/doc/fglrx_man/COPYING"]
- XSLTPROC The 'xsltproc' binary with path. Use it to define or override
- the location of 'xsltproc'.
- XSLTPROC_FLAGS
- More options, which should be used along with 'xsltproc', like
- e.g. '--nonet'.
- PKG_CONFIG path to pkg-config utility
- XMLLINT The 'xmllint' binary with path. Use it to define or override the
- location of 'xmllint'.
- XMLLINT_FLAGS
- More options, which should be used along with 'xmllint', like
- e.g. '--nonet'.
- MAN The 'man' binary with path. Use it to define or override the
- location of 'man'.
- XMLCATALOG The 'xmlcatalog' binary with path. Use it to define or override
- the location of 'xmlcatalog'.
- XML_CATALOG_FILE
- The default system catalog. Use it to define or override the
- systems catalog '/etc/xml/catalog'.
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <http://bugs.debian.org/fglrx-driver>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" || continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-fglrx-driver configure 8.32.5
-generated by GNU Autoconf 2.61
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by fglrx-driver $as_me 8.32.5, which was
-generated by GNU Autoconf 2.61. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
-done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
- 2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
- ;;
- esac
- done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -n "$CONFIG_SITE"; then
- set x "$CONFIG_SITE"
-elif test "x$prefix" != xNONE; then
- set x "$prefix/share/config.site" "$prefix/etc/config.site"
-else
- set x "$ac_default_prefix/share/config.site" \
- "$ac_default_prefix/etc/config.site"
-fi
-shift
-for ac_site_file
-do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-am__api_version='1.10'
-
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-IFS=$as_save_IFS
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
-fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $. echo might interpret backslashes.
-# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
-if test -z "$MKDIR_P"; then
- if test "${ac_cv_path_mkdir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
- 'mkdir (GNU coreutils) '* | \
- 'mkdir (coreutils) '* | \
- 'mkdir (fileutils) '4.1*)
- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
- break 3;;
- esac
- done
- done
-done
-IFS=$as_save_IFS
-
-fi
-
- if test "${ac_cv_path_mkdir+set}" = set; then
- MKDIR_P="$ac_cv_path_mkdir -p"
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for MKDIR_P within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- test -d ./--version && rmdir ./--version
- MKDIR_P="$ac_install_sh -d"
- fi
-fi
-{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-echo "${ECHO_T}$MKDIR_P" >&6; }
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
- SET_MAKE=
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- am__isrc=' -I$(srcdir)'
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE=fglrx-driver-man
- VERSION=8.32.5
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-
-
-
-
-
-
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-
-
-{ echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
- if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort. b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions. Remove them first so a
-# subsequent execution test works.
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { (ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- ac_file=''
-fi
-
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
-if test -z "$ac_file"; then
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
-
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_c89=$ac_arg
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
- xno)
- { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
- # Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_GREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_GREP=$GREP
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
- # Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_EGREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
-
- fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-{ echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
-echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6; }
-if test "${ac_cv_c_bigendian+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # See if sys/param.h defines the BYTE_ORDER macro.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/param.h>
-
-int
-main ()
-{
-#if ! (defined BYTE_ORDER && defined BIG_ENDIAN && defined LITTLE_ENDIAN \
- && BYTE_ORDER && BIG_ENDIAN && LITTLE_ENDIAN)
- bogus endian macros
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- # It does; now see whether it defined to BIG_ENDIAN or not.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/param.h>
-
-int
-main ()
-{
-#if BYTE_ORDER != BIG_ENDIAN
- not big endian
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_c_bigendian=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_c_bigendian=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # It does not; compile a test program.
-if test "$cross_compiling" = yes; then
- # try to guess the endianness by grepping values into an object file
- ac_cv_c_bigendian=unknown
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-short int ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
-short int ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
-void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
-short int ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
-short int ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
-void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
-int
-main ()
-{
- _ascii (); _ebcdic ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
- ac_cv_c_bigendian=yes
-fi
-if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
- if test "$ac_cv_c_bigendian" = unknown; then
- ac_cv_c_bigendian=no
- else
- # finding both strings is unlikely to happen, but who knows?
- ac_cv_c_bigendian=unknown
- fi
-fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-
- /* Are we little or big endian? From Harbison&Steele. */
- union
- {
- long int l;
- char c[sizeof (long int)];
- } u;
- u.l = 1;
- return u.c[sizeof (long int) - 1] == 1;
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_bigendian=no
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_c_bigendian=yes
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
-echo "${ECHO_T}$ac_cv_c_bigendian" >&6; }
-case $ac_cv_c_bigendian in
- yes)
-
-cat >>confdefs.h <<\_ACEOF
-#define WORDS_BIGENDIAN 1
-_ACEOF
- ;;
- no)
- ;;
- *)
- { { echo "$as_me:$LINENO: error: unknown endianness
-presetting ac_cv_c_bigendian=no (or yes) will help" >&5
-echo "$as_me: error: unknown endianness
-presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-
-# Check whether --enable-build-checks was given.
-if test "${enable_build_checks+set}" = set; then
- enableval=$enable_build_checks;
-else
- enable_build_checks=no
-
-fi
-
- if test "x$enable_build_checks" != "xno"; then
- ENABLE_BUILD_CHECKS_TRUE=
- ENABLE_BUILD_CHECKS_FALSE='#'
-else
- ENABLE_BUILD_CHECKS_TRUE='#'
- ENABLE_BUILD_CHECKS_FALSE=
-fi
-
-
-ATI_DRIVER_NAME="ATI Linux driver"
-ATI_DRIVER_VERSION="$VERSION"
-
-if test "x$DRIVER_PACKAGE" = "x"; then
- ATI_DRIVER_PACKAGE="Debian GNU/Linux fglrx-driver package"
-else
- ATI_DRIVER_PACKAGE=$DRIVER_PACKAGE
- { echo "$as_me:$LINENO: DRIVER_PACKAGE has been overwritten with: '$DRIVER_PACKAGE'" >&5
-echo "$as_me: DRIVER_PACKAGE has been overwritten with: '$DRIVER_PACKAGE'" >&6;}
-fi
-
-
-
-
-if test "$prefix" = "NONE" ; then prefix=/usr/local ; fi
-{ echo "$as_me:$LINENO: checking for prefix." >&5
-echo $ECHO_N "checking for prefix.... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $prefix" >&5
-echo "${ECHO_T}$prefix" >&6; }
-{ echo "$as_me:$LINENO: checking for datadir" >&5
-echo $ECHO_N "checking for datadir... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $datadir" >&5
-echo "${ECHO_T}$datadir" >&6; }
-{ echo "$as_me:$LINENO: checking for mandir" >&5
-echo $ECHO_N "checking for mandir... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $mandir" >&5
-echo "${ECHO_T}$mandir" >&6; }
-
-
-if test -z "$LICENSE_FILE"; then
- eval eval dt=`echo $datadir`
- PACKAGE_LICENSE_FILE="$dt/doc/fglrx_man/COPYING"
-else
- PACKAGE_LICENSE_FILE=$LICENSE_FILE
- { echo "$as_me:$LINENO: LICENSE shall be found at... $LICENSE_FILE" >&5
-echo "$as_me: LICENSE shall be found at... $LICENSE_FILE" >&6;}
-fi
-
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-IFS=$as_save_IFS
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-
-
- # Extract the first word of "xsltproc", so it can be a program name with args.
-set dummy xsltproc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_XSLTPROC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $XSLTPROC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XSLTPROC="$XSLTPROC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_XSLTPROC="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XSLTPROC=$ac_cv_path_XSLTPROC
-if test -n "$XSLTPROC"; then
- { echo "$as_me:$LINENO: result: $XSLTPROC" >&5
-echo "${ECHO_T}$XSLTPROC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- if test -z $XSLTPROC ; then
- { { echo "$as_me:$LINENO: error: 'xsltproc' was not found! We cannot proceed. See README." >&5
-echo "$as_me: error: 'xsltproc' was not found! We cannot proceed. See README." >&2;}
- { (exit 1); exit 1; }; } ;
- fi
-
-
- { echo "$as_me:$LINENO: checking for optional xsltproc options to use" >&5
-echo $ECHO_N "checking for optional xsltproc options to use... $ECHO_C" >&6; }
- { echo "$as_me:$LINENO: result: $XSLTPROC_FLAGS" >&5
-echo "${ECHO_T}$XSLTPROC_FLAGS" >&6; }
-
-
-
-
-if test "x$enable_build_checks" != "xno" ; then
-
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
-set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $PKG_CONFIG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-if test -n "$PKG_CONFIG"; then
- { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
-echo "${ECHO_T}$PKG_CONFIG" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_PKG_CONFIG"; then
- ac_pt_PKG_CONFIG=$PKG_CONFIG
- # Extract the first word of "pkg-config", so it can be a program name with args.
-set dummy pkg-config; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $ac_pt_PKG_CONFIG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-if test -n "$ac_pt_PKG_CONFIG"; then
- { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
-echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_pt_PKG_CONFIG" = x; then
- PKG_CONFIG=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- PKG_CONFIG=$ac_pt_PKG_CONFIG
- fi
-else
- PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
-fi
-
-fi
-if test -n "$PKG_CONFIG"; then
- _pkg_min_version=0.9.0
- { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
-echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; }
- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
- else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- PKG_CONFIG=""
- fi
-
-fi
-
-
-
-
- # Extract the first word of "xmllint", so it can be a program name with args.
-set dummy xmllint; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_XMLLINT+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $XMLLINT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XMLLINT="$XMLLINT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_XMLLINT="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XMLLINT=$ac_cv_path_XMLLINT
-if test -n "$XMLLINT"; then
- { echo "$as_me:$LINENO: result: $XMLLINT" >&5
-echo "${ECHO_T}$XMLLINT" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- if test -z $XMLLINT ; then
- { { echo "$as_me:$LINENO: error: 'xmllint' was not found. We cannot validate the XML sources." >&5
-echo "$as_me: error: 'xmllint' was not found. We cannot validate the XML sources." >&2;}
- { (exit 1); exit 1; }; } ;
- else
- { echo "$as_me:$LINENO: checking for xmllint >= 2.6.24" >&5
-echo $ECHO_N "checking for xmllint >= 2.6.24... $ECHO_C" >&6; }
-
- if test -n "$PKG_CONFIG" && \
- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libxml-2.0 >= 2.6.24\"") >&5
- ($PKG_CONFIG --exists --print-errors "libxml-2.0 >= 2.6.24") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
-
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- { { echo "$as_me:$LINENO: error: 'xmllint' too old. We cannot validate the XML sources." >&5
-echo "$as_me: error: 'xmllint' too old. We cannot validate the XML sources." >&2;}
- { (exit 1); exit 1; }; }
- XMLLINT=""
-
-
-fi
-
- fi
-
-
- { echo "$as_me:$LINENO: checking for optional xmllint options to use" >&5
-echo $ECHO_N "checking for optional xmllint options to use... $ECHO_C" >&6; }
- { echo "$as_me:$LINENO: result: $XMLLINT_FLAGS" >&5
-echo "${ECHO_T}$XMLLINT_FLAGS" >&6; }
-
-
-
-
-
-
-
- # Extract the first word of "man", so it can be a program name with args.
-set dummy man; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_MAN+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MAN in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MAN="$MAN" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_MAN="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MAN=$ac_cv_path_MAN
-if test -n "$MAN"; then
- { echo "$as_me:$LINENO: result: $MAN" >&5
-echo "${ECHO_T}$MAN" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- if test -z $MAN ; then
- { { echo "$as_me:$LINENO: error: 'man' was not found. We cannot check the manpages for errors. See README." >&5
-echo "$as_me: error: 'man' was not found. We cannot check the manpages for errors. See README." >&2;}
- { (exit 1); exit 1; }; } ;
- fi
-
-
-
-fi
-
-
-
-# Check whether --with-docbook-xsl-dir was given.
-if test "${with_docbook_xsl_dir+set}" = set; then
- withval=$with_docbook_xsl_dir; PATH_DOCBOOK_XSL=$withval
-fi
-
-
-
- # Extract the first word of "xmlcatalog", so it can be a program name with args.
-set dummy xmlcatalog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_XMLCATALOG+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $XMLCATALOG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XMLCATALOG="$XMLCATALOG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_XMLCATALOG="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XMLCATALOG=$ac_cv_path_XMLCATALOG
-if test -n "$XMLCATALOG"; then
- { echo "$as_me:$LINENO: result: $XMLCATALOG" >&5
-echo "${ECHO_T}$XMLCATALOG" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-
-
- if test -z $XML_CATALOG_FILE ; then
- XML_CATALOG_FILE="/etc/xml/catalog"
- fi
-
- if test -z $PATH_DOCBOOK_XSL -a $XMLCATALOG ; then
- if { (echo "$as_me:$LINENO: \$XMLCATALOG --noout \"\$XML_CATALOG_FILE\" \"http://docbook.sourceforge.net/release/xsl/current/\" >&2") >&5
- ($XMLCATALOG --noout "$XML_CATALOG_FILE" "http://docbook.sourceforge.net/release/xsl/current/" >&2) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } ; then
- PATH_DOCBOOK_XSL="http://docbook.sourceforge.net/release/xsl/current"
- fi
- fi
-
- if test -z $PATH_DOCBOOK_XSL ; then
- db_xsl_dir_list="
- /usr/share/sgml/docbook/xsl-stylesheets
- /usr/share/sgml/docbook/stylesheet/xsl/nwalsh
- /usr/share/xml/docbook/stylesheet/nwalsh
- /usr/local/share/sgml/docbook/xsl-stylesheets
- /usr/local/share/sgml/docbook/stylesheet/xsl/nwalsh
- /usr/local/share/xml/docbook/stylesheet/nwalsh
- /opt/share/sgml/docbook/xsl-stylesheets
- $datadir/sgml/docbook/xsl-stylesheets
- $datadir/sgml/docbook/stylesheet/xsl/nwalsh
- $datadir/xml/docbook/stylesheet/nwalsh
- "
- for dir in $db_xsl_dir_list ; do
- if test -f $dir/catalog.xml ; then
- PATH_DOCBOOK_XSL=$dir
- break
- fi
- done
- fi
-
- if test -z $PATH_DOCBOOK_XSL ; then
- PATH_DOCBOOK_XSL="http://docbook.sourceforge.net/release/xsl/current"
- fi
-
- { echo "$as_me:$LINENO: checking for XSL stylesheet dir" >&5
-echo $ECHO_N "checking for XSL stylesheet dir... $ECHO_C" >&6; }
- { echo "$as_me:$LINENO: result: $PATH_DOCBOOK_XSL" >&5
-echo "${ECHO_T}$PATH_DOCBOOK_XSL" >&6; }
-
-
-
-
-
-
-
-# Check whether --with-xserver was given.
-if test "${with_xserver+set}" = set; then
- withval=$with_xserver;
- if test -z $withval ; then
- for ac_prog in Xorg XFree86
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_PROG_XSERVER_STRING+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$PROG_XSERVER_STRING"; then
- ac_cv_prog_PROG_XSERVER_STRING="$PROG_XSERVER_STRING" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_PROG_XSERVER_STRING="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-PROG_XSERVER_STRING=$ac_cv_prog_PROG_XSERVER_STRING
-if test -n "$PROG_XSERVER_STRING"; then
- { echo "$as_me:$LINENO: result: $PROG_XSERVER_STRING" >&5
-echo "${ECHO_T}$PROG_XSERVER_STRING" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$PROG_XSERVER_STRING" && break
-done
-
- else
- PROG_XSERVER_STRING=$withval
- fi
-
-else
- for ac_prog in Xorg XFree86
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_PROG_XSERVER_STRING+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$PROG_XSERVER_STRING"; then
- ac_cv_prog_PROG_XSERVER_STRING="$PROG_XSERVER_STRING" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_PROG_XSERVER_STRING="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-PROG_XSERVER_STRING=$ac_cv_prog_PROG_XSERVER_STRING
-if test -n "$PROG_XSERVER_STRING"; then
- { echo "$as_me:$LINENO: result: $PROG_XSERVER_STRING" >&5
-echo "${ECHO_T}$PROG_XSERVER_STRING" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$PROG_XSERVER_STRING" && break
-done
-
-
-fi
-
-
- if test "x$PROG_XSERVER_STRING" = "xXorg" ; then
- PROG_XSERVER_NAME="X.org"
- PROG_XSERVER_CONF="xorg.conf"
- PROG_XSERVER_CONFIG="xorgconfig"
- elif test "x$PROG_XSERVER_STRING" = "xXFree86" ; then
- PROG_XSERVER_NAME="XFree86"
- PROG_XSERVER_CONF="XF86Config-4"
- PROG_XSERVER_CONFIG="xf86config"
- else
- { { echo "$as_me:$LINENO: error: Unknown X-server." >&5
-echo "$as_me: error: Unknown X-server." >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- { echo "$as_me:$LINENO: checking for X-server" >&5
-echo $ECHO_N "checking for X-server... $ECHO_C" >&6; }
- { echo "$as_me:$LINENO: result: $PROG_XSERVER_NAME" >&5
-echo "${ECHO_T}$PROG_XSERVER_NAME" >&6; }
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-xserver-app-man-dir was given.
-if test "${with_xserver_app_man_dir+set}" = set; then
- withval=$with_xserver_app_man_dir;
- if test -z $withval ; then
- PATH_XSERVER_MAN_APP="$mandir/man1"
- else
- PATH_XSERVER_MAN_APP=$withval
- fi
-
-else
- PATH_XSERVER_MAN_APP="$mandir/man1"
-
-fi
-
-
-
-# Check whether --with-xserver-driver-man-dir was given.
-if test "${with_xserver_driver_man_dir+set}" = set; then
- withval=$with_xserver_driver_man_dir;
- if test -z $withval ; then
- PATH_XSERVER_MAN_DRIVER="$mandir/man4"
- else
- PATH_XSERVER_MAN_DRIVER=$withval
- fi
-
-else
- PATH_XSERVER_MAN_DRIVER="$mandir/man4"
-
-fi
-
-
-
-# Check whether --with-xserver-file-man-dir was given.
-if test "${with_xserver_file_man_dir+set}" = set; then
- withval=$with_xserver_file_man_dir;
- if test -z $withval ; then
- PATH_XSERVER_MAN_FILE="$mandir/man5"
- else
- PATH_XSERVER_MAN_FILE=$withval
- fi
-
-else
- PATH_XSERVER_MAN_FILE="$mandir/man5"
-
-fi
-
-
- { echo "$as_me:$LINENO: checking for X-server application-manpages dir" >&5
-echo $ECHO_N "checking for X-server application-manpages dir... $ECHO_C" >&6; }
- { echo "$as_me:$LINENO: result: $PATH_XSERVER_MAN_APP" >&5
-echo "${ECHO_T}$PATH_XSERVER_MAN_APP" >&6; }
- { echo "$as_me:$LINENO: checking for X-server driver-manpages dir" >&5
-echo $ECHO_N "checking for X-server driver-manpages dir... $ECHO_C" >&6; }
- { echo "$as_me:$LINENO: result: $PATH_XSERVER_MAN_DRIVER" >&5
-echo "${ECHO_T}$PATH_XSERVER_MAN_DRIVER" >&6; }
- { echo "$as_me:$LINENO: checking for X-server file-manpages dir" >&5
-echo $ECHO_N "checking for X-server file-manpages dir... $ECHO_C" >&6; }
- { echo "$as_me:$LINENO: result: $PATH_XSERVER_MAN_FILE" >&5
-echo "${ECHO_T}$PATH_XSERVER_MAN_FILE" >&6; }
-
-
-
-
-
-
-ac_config_files="$ac_config_files Makefile fglrx_man_entities.dtd fglrx_html_stylesheet.xsl fglrx_man_stylesheet.xsl"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
- { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-t clear
-:clear
-s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
- g
- s/^\n//
- s/\n/ /g
- p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${ENABLE_BUILD_CHECKS_TRUE}" && test -z "${ENABLE_BUILD_CHECKS_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"ENABLE_BUILD_CHECKS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"ENABLE_BUILD_CHECKS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-
-# Save the log message, to keep $[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by fglrx-driver $as_me 8.32.5, which was
-generated by GNU Autoconf 2.61. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf at gnu.org>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-fglrx-driver config.status 8.32.5
-configured by $0, generated by GNU Autoconf 2.61,
- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2006 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- echo "$ac_cs_version"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --he | --h | --help | --hel | -h )
- echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- CONFIG_SHELL=$SHELL
- export CONFIG_SHELL
- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "fglrx_man_entities.dtd") CONFIG_FILES="$CONFIG_FILES fglrx_man_entities.dtd" ;;
- "fglrx_html_stylesheet.xsl") CONFIG_FILES="$CONFIG_FILES fglrx_html_stylesheet.xsl" ;;
- "fglrx_man_stylesheet.xsl") CONFIG_FILES="$CONFIG_FILES fglrx_man_stylesheet.xsl" ;;
-
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp=
- trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-
-_ACEOF
-
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-am__isrc!$am__isrc$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-install_sh!$install_sh$ac_delim
-STRIP!$STRIP$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-mkdir_p!$mkdir_p$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-AMTAR!$AMTAR$ac_delim
-am__tar!$am__tar$ac_delim
-am__untar!$am__untar$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-DEPDIR!$DEPDIR$ac_delim
-am__include!$am__include$ac_delim
-am__quote!$am__quote$ac_delim
-AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-CCDEPMODE!$CCDEPMODE$ac_delim
-am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
-am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-CPP!$CPP$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-ENABLE_BUILD_CHECKS_TRUE!$ENABLE_BUILD_CHECKS_TRUE$ac_delim
-ENABLE_BUILD_CHECKS_FALSE!$ENABLE_BUILD_CHECKS_FALSE$ac_delim
-DRIVER_PACKAGE!$DRIVER_PACKAGE$ac_delim
-ATI_DRIVER_NAME!$ATI_DRIVER_NAME$ac_delim
-ATI_DRIVER_VERSION!$ATI_DRIVER_VERSION$ac_delim
-ATI_DRIVER_PACKAGE!$ATI_DRIVER_PACKAGE$ac_delim
-LICENSE_FILE!$LICENSE_FILE$ac_delim
-PACKAGE_LICENSE_FILE!$PACKAGE_LICENSE_FILE$ac_delim
-XSLTPROC!$XSLTPROC$ac_delim
-XSLTPROC_FLAGS!$XSLTPROC_FLAGS$ac_delim
-PKG_CONFIG!$PKG_CONFIG$ac_delim
-XMLLINT!$XMLLINT$ac_delim
-XMLLINT_FLAGS!$XMLLINT_FLAGS$ac_delim
-MAN!$MAN$ac_delim
-XMLCATALOG!$XMLCATALOG$ac_delim
-XML_CATALOG_FILE!$XML_CATALOG_FILE$ac_delim
-PATH_DOCBOOK_XSL!$PATH_DOCBOOK_XSL$ac_delim
-PROG_XSERVER_STRING!$PROG_XSERVER_STRING$ac_delim
-PROG_XSERVER_NAME!$PROG_XSERVER_NAME$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-CEOF$ac_eof
-_ACEOF
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-PROG_XSERVER_CONF!$PROG_XSERVER_CONF$ac_delim
-PROG_XSERVER_CONFIG!$PROG_XSERVER_CONFIG$ac_delim
-PATH_XSERVER_MAN_APP!$PATH_XSERVER_MAN_APP$ac_delim
-PATH_XSERVER_MAN_DRIVER!$PATH_XSERVER_MAN_DRIVER$ac_delim
-PATH_XSERVER_MAN_FILE!$PATH_XSERVER_MAN_FILE$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 7; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
-_ACEOF
-
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-fi # test -n "$CONFIG_FILES"
-
-
-for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
- { (exit 1); exit 1; }; };;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- ac_file_inputs="$ac_file_inputs $ac_f"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input="Generated from "`IFS=:
- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- fi
-
- case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin";;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
- ac_MKDIR_P=$MKDIR_P
- case $MKDIR_P in
- [\\/$]* | ?:[\\/]* ) ;;
- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-
-case `sed -n '/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-' $ac_file_inputs` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
-
- rm -f "$tmp/stdin"
- case $ac_file in
- -) cat "$tmp/out"; rm -f "$tmp/out";;
- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
- esac
- ;;
-
-
- :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir=$dirpart/$fdir
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
-
- esac
-done # for ac_tag
-
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
-fi
-
Deleted: fglrx-driver/trunk/debian/man/install-sh
===================================================================
--- fglrx-driver/trunk/debian/man/install-sh 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/man/install-sh 2010-03-21 20:35:18 UTC (rev 383)
@@ -1,507 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2006-10-14.15
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" "" $nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
- case $1 in
- -c) shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- --help) echo "$usage"; exit $?;;
-
- -m) mode=$2
- shift
- shift
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t) dstarg=$2
- shift
- shift
- continue;;
-
- -T) no_target_directory=true
- shift
- continue;;
-
- --version) echo "$0 $scriptversion"; exit $?;;
-
- --) shift
- break;;
-
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
-
- *) break;;
- esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
-fi
-
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
-
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src ;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dstarg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dstarg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst ;;
- esac
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
-
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix=/ ;;
- -*) prefix=./ ;;
- *) prefix= ;;
- esac
-
- case $posix_glob in
- '')
- if (set -f) 2>/dev/null; then
- posix_glob=true
- else
- posix_glob=false
- fi ;;
- esac
-
- oIFS=$IFS
- IFS=/
- $posix_glob && set -f
- set fnord $dstdir
- shift
- $posix_glob && set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test -z "$d" && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
-
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dst"; then
- $doit $rmcmd -f "$dst" 2>/dev/null \
- || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
- && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
- || {
- echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- else
- :
- fi
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- } || exit 1
-
- trap '' 0
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
Deleted: fglrx-driver/trunk/debian/man/missing
===================================================================
--- fglrx-driver/trunk/debian/man/missing 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/man/missing 2010-03-21 20:35:18 UTC (rev 383)
@@ -1,367 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2006-05-10.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake at gnu.org>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case $1 in
- lex|yacc)
- # Not GNU programs, they don't have --version.
- ;;
-
- tar)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $1 in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison|yacc)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex|flex)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit 1
- fi
- ;;
-
- makeinfo)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- tar)
- shift
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case $firstarg in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case $firstarg in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
Modified: fglrx-driver/trunk/debian/rules
===================================================================
--- fglrx-driver/trunk/debian/rules 2010-03-21 20:35:14 UTC (rev 382)
+++ fglrx-driver/trunk/debian/rules 2010-03-21 20:35:18 UTC (rev 383)
@@ -75,7 +75,7 @@
rm -rf usr lib etc opt
rm -rf extra_src
# Clean manpages.
- [ ! -f debian/man/Makefile ] || $(MAKE) -C debian/man distclean
+ [ ! -f debian/man/Makefile ] || $(MAKE) -C debian/man maintainer-clean
distclean: clean
More information about the Pkg-fglrx-devel
mailing list