[Pkg-fglrx-devel] Bug#601954: fglrx-driver: New upstream release 10-10
Patrick Matthäi
pmatthaei at debian.org
Sun Oct 31 11:13:58 UTC 2010
Package: fglrx-driver
Version: 1:10-9-3
Severity: wishlist
so that nobody else reports it. :)
-- Package-specific info:
VGA-compatible devices on PCI bus:
04:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350]
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.448197] PCI-DMA: Disabling AGP.
[ 0.448289] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.462818] Linux agpgart interface v0.103
[ 30.035981] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 30.454272] [fglrx] Maximum main memory to use for locked dma buffers: 3804 MBytes.
[ 30.454633] [fglrx] vendor: 1002 device: 954f count: 1
[ 30.455443] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 30.456677] [fglrx] Kernel PAT support is enabled
[ 30.456738] [fglrx] module loaded - fglrx 8.78.6 [Oct 5 2010] with 1 minors
[ 30.935803] fglrx_pci 0000:04:00.0: irq 46 for MSI/MSI-X
[ 30.937838] [fglrx] Firegl kernel thread PID: 1439
[ 30.938387] [fglrx] IRQ 46 Enabled
[ 32.529945] [fglrx] Gart USWC size:1240 M.
[ 32.529949] [fglrx] Gart cacheable size:491 M.
[ 32.529954] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 32.529957] [fglrx] Reserved FB block: Unshared offset:fc1d000, size:3e3000
[ 32.529959] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 712 Nov 7 2009 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:4:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 35366 Nov 23 2009 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 23279 Oct 31 12:04 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux exez 2.6.36-trunk-amd64 #1 SMP Wed Oct 27 14:28:29 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.36-trunk-amd64 root=UUID=8ce883ce-13bc-4d1e-aff8-d5efc1e40077 ro quiet
Build Date: 10 October 2010 11:06:53AM
xorg-server 2:1.7.7-8 (Cyril Brulebois <kibi at debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 31 12:03:59 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]-0"
(**) | |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c8a20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:4:0:0) 1002:954f:174b:e113 ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfebf0000/65536, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.78.6
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.78.6
(II) ATI Proprietary Linux Driver Version Identifier:8.78.6
(II) ATI Proprietary Linux Driver Release Identifier: 8.783
(II) ATI Proprietary Linux Driver Build Date: Oct 5 2010 21:22:54
(II) Primary Device is: PCI 04 at 00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x954F) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0 at 4:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x1e2a070
(II) fglrx(0): === [xdl_x750_atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:4:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:4:0:0
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): ATI 2D Acceleration Architecture enabled
(--) fglrx(0): Chipset: "ATI Radeon HD 4300/4500 Series " (Chipset = 0x954f)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe113)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfebf0000
(--) fglrx(0): I/O port at 0x0000e000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.19
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: N
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 4:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
(II) fglrx(0): Interrupt handler installed at IRQ 46.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) fglrx(0): Active stereo disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output CV has no monitor section
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: CRT1
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: GSM Model: 4a90 Serial#: 120005
(II) fglrx(0): Year: 2005 Week: 11
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate Composite SyncOnGreen
(II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.647 redY: 0.346 greenX: 0.292 greenY: 0.602
(II) fglrx(0): blueX: 0.149 blueY: 0.130 whiteX: 0.313 whiteY: 0.328
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400 at 70Hz
(II) fglrx(0): 640x480 at 60Hz
(II) fglrx(0): 640x480 at 75Hz
(II) fglrx(0): 800x600 at 60Hz
(II) fglrx(0): 800x600 at 75Hz
(II) fglrx(0): 832x624 at 75Hz
(II) fglrx(0): 1024x768 at 60Hz
(II) fglrx(0): 1024x768 at 75Hz
(II) fglrx(0): 1280x1024 at 75Hz
(II) fglrx(0): 1152x864 at 75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
(II) fglrx(0): Monitor name: L1915S
(II) fglrx(0): Monitor name:
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff001e6d904ac5d40100
(II) fglrx(0): 0b0f01036e261e78eaec54a5584a9a26
(II) fglrx(0): 215054a56b80314f454f614f81800101
(II) fglrx(0): 010101010101302a009851002a403070
(II) fglrx(0): 1300782d1100001e000000fd00384b1e
(II) fglrx(0): 530e000a202020202020000000fc004c
(II) fglrx(0): 31393135530a202020202020000000fc
(II) fglrx(0): 000a20202020202020202020202000b4
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Connected Display1: TV
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PNP Model: 9fe Serial#: 0
(II) fglrx(0): Year: 1990 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:
(II) fglrx(0): Indeterminate output size
(II) fglrx(0): Gamma: 1.00
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; Non RGB Multicolor Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard!
(II) fglrx(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000
(II) fglrx(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 640x480 at 60Hz
(II) fglrx(0): 800x600 at 60Hz
(II) fglrx(0): 1024x768 at 60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0041d0fe0900000000
(II) fglrx(0): 0000010300000000f000000000000000
(II) fglrx(0): 00000021080000000000000000000000
(II) fglrx(0): 00000000000000000000000000000000
(II) fglrx(0): 00000000000000000000000000000000
(II) fglrx(0): 00000000000000000000000000000000
(II) fglrx(0): 00000000000000000000000000000000
(II) fglrx(0): 000000000000000000000000000000d1
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output CRT1 connected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV connected
(II) fglrx(0): Output CV disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output CRT1 using initial mode 1024x768
(II) fglrx(0): Output TV using initial mode 1024x768
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Radeon HD 4300/4500 Series has 2 configurable heads and 2 displays connected.
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:4:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 16, (OK)
ukiOpenByBusid: ukiOpenMinor returns 16
ukiOpenByBusid: ukiGetBusid reports PCI:4:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:4:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f0318b15000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.78.6
(II) fglrx(0): Date: Oct 5 2010
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.36-trunk-amd64
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
(II) fglrx(0): DRI initialization successfull
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000
(II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1664 x 960
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 528
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:4:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:4:0:0
(II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 270 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event5)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
(**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event0"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event1)
(**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "evdev keyboard catchall"
(**) Microsoft Comfort Curve Keyboard 2000: always reports core events
(**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event1"
(II) Microsoft Comfort Curve Keyboard 2000: Found keys
(II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event2)
(**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "evdev keyboard catchall"
(**) Microsoft Comfort Curve Keyboard 2000: always reports core events
(**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event2"
(II) Microsoft Comfort Curve Keyboard 2000: Found 1 mouse buttons
(II) Microsoft Comfort Curve Keyboard 2000: Found scroll wheel(s)
(II) Microsoft Comfort Curve Keyboard 2000: Found relative axes
(II) Microsoft Comfort Curve Keyboard 2000: Found absolute axes
(II) Microsoft Comfort Curve Keyboard 2000: Found keys
(II) Microsoft Comfort Curve Keyboard 2000: Configuring as mouse
(II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
(**) Microsoft Comfort Curve Keyboard 2000: YAxisMapping: buttons 4 and 5
(**) Microsoft Comfort Curve Keyboard 2000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) Microsoft Comfort Curve Keyboard 2000: failed to initialize for relative axes.
(II) Microsoft Comfort Curve Keyboard 2000: initialized for absolute axes.
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (200, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.36-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages fglrx-driver depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii fglrx-glx 1:10-10-1 proprietary libGL for the non-free
ii laptop-detect 0.13.7 attempt to detect a laptop
ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib
ii libgcc1 1:4.4.5-5 GCC support library
ii libgl1-mesa-glx [libgl1] 7.7.1-4 A free implementation of the OpenG
ii libx11-6 2:1.3.3-3 X11 client-side library
ii libxext6 2:1.1.2-1 X11 miscellaneous extension librar
ii libxinerama1 2:1.1-3 X11 Xinerama extension library
ii libxrandr2 2:1.3.0-3 X11 RandR extension library
ii libxrender1 1:0.9.6-1 X Rendering Extension client libra
ii xserver-xorg 1:7.5+8 the X.Org X server
ii xserver-xorg-core [xorg-video 2:1.7.7-8 Xorg X server - core server
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:10-10-1 external events daemon for the non
ii fglrx-glx 1:10-10-1 proprietary libGL for the non-free
ii fglrx-glx-ia32 1:10-10-1 proprietary libGL for the non-free
ii fglrx-modules-dkms 1:10-10-1 dkms module source for the non-fre
ii fglrx-source 1:10-10-1 kernel module source for the non-f
Versions of packages fglrx-driver suggests:
ii fglrx-control 1:10-10-1 control panel for the non-free AMD
-- debconf information:
fglrx-driver/acpi_switch: false
More information about the Pkg-fglrx-devel
mailing list