[Pkg-fglrx-devel] Bug#597041: linux-image-2.6.32-5-xen-amd64: module radeon and active xen hypervisor problems
Christoph Kaminski
mangel at gmx.de
Fri Sep 17 04:33:27 UTC 2010
without installed fglrx I have the same problems.
Am 16.09.2010 16:05, schrieb Ian Campbell:
> On Wed, 2010-09-15 at 09:07 +0200, Christoph Kaminski wrote:
>> Package: linux-2.6
>> Version: 2.6.32-21
>> Severity: grave
>> Justification: renders package unusable
>>
>> If I boot this kernel with xen hypervisor (4.0.1 from sid) I see black screen on first monitor and garbage on second after the load of the module.
>>
>> -- Package-specific info:
>> ** Version:
>> Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-21) (ben at decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 16:02:22 UTC 2010
>>
>> ** Command line:
>> BOOT_IMAGE=/vmlinuz-2.6.32-5-xen-amd64 root=/dev/mapper/sys-behemoth_neu--root ro quiet
>>
>> ** Tainted: P (1)
>> * Proprietary module has been loaded.
>
> I'm afraid you have loaded a proprietary graphics driver which is not
> supported under this kernel and I suspect cannot work under Xen any way
> except by coincidence.
>
> If you can reproduce without fglrx please let us know.
>
>>
>> ** Kernel log:
>> [ 127.313353] [fglrx] Reserved FB block: Shared offset:0, size:1000000
>> [ 127.313354] [fglrx] Reserved FB block: Unshared offset:fbfa000, size:401000
>> [ 127.313356] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
>> [ 136.773041] CPU0 attaching NULL sched-domain.
>> [ 136.773044] CPU1 attaching NULL sched-domain.
>> [ 136.773045] CPU2 attaching NULL sched-domain.
>> [ 136.773047] CPU3 attaching NULL sched-domain.
>> [ 136.773048] CPU4 attaching NULL sched-domain.
>> [ 136.773049] CPU5 attaching NULL sched-domain.
>> [ 136.773050] CPU6 attaching NULL sched-domain.
>> [ 136.773051] CPU7 attaching NULL sched-domain.
>> [ 136.837192] CPU0 attaching sched-domain:
>> [ 136.837194] domain 0: span 0,4 level SIBLING
>> [ 136.837195] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
>> [ 136.837199] domain 1: span 0-7 level MC
>> [ 136.837200] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
>> [ 136.837206] CPU1 attaching sched-domain:
>> [ 136.837208] domain 0: span 1,5 level SIBLING
>> [ 136.837209] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
>> [ 136.837212] domain 1: span 0-7 level MC
>> [ 136.837213] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
>> [ 136.837219] CPU2 attaching sched-domain:
>> [ 136.837220] domain 0: span 2,6 level SIBLING
>> [ 136.837221] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
>> [ 136.837224] domain 1: span 0-7 level MC
>> [ 136.837225] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
>> [ 136.837231] CPU3 attaching sched-domain:
>> [ 136.837232] domain 0: span 3,7 level SIBLING
>> [ 136.837233] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
>> [ 136.837236] domain 1: span 0-7 level MC
>> [ 136.837237] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
>> [ 136.837243] CPU4 attaching sched-domain:
>> [ 136.837244] domain 0: span 0,4 level SIBLING
>> [ 136.837245] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
>> [ 136.837248] domain 1: span 0-7 level MC
>> [ 136.837250] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
>> [ 136.837255] CPU5 attaching sched-domain:
>> [ 136.837256] domain 0: span 1,5 level SIBLING
>> [ 136.837257] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
>> [ 136.837260] domain 1: span 0-7 level MC
>> [ 136.837261] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
>> [ 136.837267] CPU6 attaching sched-domain:
>> [ 136.837268] domain 0: span 2,6 level SIBLING
>> [ 136.837269] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
>> [ 136.837272] domain 1: span 0-7 level MC
>> [ 136.837273] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
>> [ 136.837279] CPU7 attaching sched-domain:
>> [ 136.837280] domain 0: span 3,7 level SIBLING
>> [ 136.837281] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
>> [ 136.837284] domain 1: span 0-7 level MC
>> [ 136.837285] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
>> [ 136.837892] CPU0 attaching NULL sched-domain.
>> [ 136.837894] CPU1 attaching NULL sched-domain.
>> [ 136.837895] CPU2 attaching NULL sched-domain.
>> [ 136.837896] CPU3 attaching NULL sched-domain.
>> [ 136.837897] CPU4 attaching NULL sched-domain.
>> [ 136.837898] CPU5 attaching NULL sched-domain.
>> [ 136.837900] CPU6 attaching NULL sched-domain.
>> [ 136.837901] CPU7 attaching NULL sched-domain.
>> [ 136.901211] CPU0 attaching sched-domain:
>> [ 136.901214] domain 0: span 0,4 level SIBLING
>> [ 136.901215] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
>> [ 136.901219] domain 1: span 0-7 level MC
>> [ 136.901220] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
>> [ 136.901226] CPU1 attaching sched-domain:
>> [ 136.901227] domain 0: span 1,5 level SIBLING
>> [ 136.901229] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
>> [ 136.901232] domain 1: span 0-7 level MC
>> [ 136.901233] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
>> [ 136.901238] CPU2 attaching sched-domain:
>> [ 136.901239] domain 0: span 2,6 level SIBLING
>> [ 136.901241] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
>> [ 136.901244] domain 1: span 0-7 level MC
>> [ 136.901245] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
>> [ 136.901250] CPU3 attaching sched-domain:
>> [ 136.901251] domain 0: span 3,7 level SIBLING
>> [ 136.901253] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
>> [ 136.901256] domain 1: span 0-7 level MC
>> [ 136.901257] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
>> [ 136.901262] CPU4 attaching sched-domain:
>> [ 136.901264] domain 0: span 0,4 level SIBLING
>> [ 136.901265] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
>> [ 136.901268] domain 1: span 0-7 level MC
>> [ 136.901269] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
>> [ 136.901275] CPU5 attaching sched-domain:
>> [ 136.901276] domain 0: span 1,5 level SIBLING
>> [ 136.901277] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
>> [ 136.901280] domain 1: span 0-7 level MC
>> [ 136.901281] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
>> [ 136.901286] CPU6 attaching sched-domain:
>> [ 136.901288] domain 0: span 2,6 level SIBLING
>> [ 136.901289] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
>> [ 136.901292] domain 1: span 0-7 level MC
>> [ 136.901293] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
>> [ 136.901298] CPU7 attaching sched-domain:
>> [ 136.901300] domain 0: span 3,7 level SIBLING
>> [ 136.901301] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
>> [ 136.901304] domain 1: span 0-7 level MC
>> [ 136.901305] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
>> [ 831.259195] CE: hpet increasing min_delta_ns to 15000 nsec
>>
>> ** Model information
>> sys_vendor: Dell Inc.
>> product_name: Precision WorkStation T3500
>> product_version:
>> chassis_vendor: Dell Inc.
>> chassis_version:
>> bios_vendor: Dell Inc.
>> bios_version: A07
>> board_vendor: Dell Inc.
>> board_name: 0XPDFK
>> board_version: A01
>>
>> ** Loaded modules:
>> Module Size Used by
>> tun 10892 2
>> radeon 572779 0
>> ttm 40034 1 radeon
>> drm_kms_helper 20065 1 radeon
>> drm 143553 3 radeon,ttm,drm_kms_helper
>> i2c_algo_bit 4225 1 radeon
>> sco 7209 2
>> rfcomm 29597 0
>> bnep 9459 2
>> l2cap 24736 6 rfcomm,bnep
>> crc16 1319 1 l2cap
>> bluetooth 41827 6 sco,rfcomm,bnep,l2cap
>> rfkill 13028 2 bluetooth
>> binfmt_misc 6431 1
>> fuse 50206 1
>> bridge 39630 0
>> stp 1440 1 bridge
>> coretemp 4325 0
>> loop 11799 0
>> snd_hda_codec_analog 64562 1
>> snd_hda_intel 19987 1
>> snd_hda_codec 54244 2 snd_hda_codec_analog,snd_hda_intel
>> snd_pcsp 6579 1
>> snd_hwdep 5380 1 snd_hda_codec
>> snd_pcm_oss 32591 0
>> snd_mixer_oss 12606 1 snd_pcm_oss
>> snd_pcm 60519 4 snd_hda_intel,snd_hda_codec,snd_pcsp,snd_pcm_oss
>> snd_timer 15582 1 snd_pcm
>> snd 46446 13 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_pcsp,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>> soundcore 4598 1 snd
>> i2c_i801 7830 0
>> parport_pc 18855 0
>> snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
>> evdev 7352 11
>> dcdbas 5048 0
>> fglrx 2368640 46
>> button 4650 0
>> wmi 4323 0
>> i2c_core 15712 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
>> parport 27954 1 parport_pc
>> processor 36149 8
>> psmouse 49777 0
>> acpi_processor 5087 1 processor,[permanent]
>> serio_raw 3752 0
>> ext3 106502 2
>> jbd 37085 1 ext3
>> mbcache 5050 1 ext3
>> dm_mod 53770 25
>> sg 18760 0
>> sd_mod 29761 3
>> sr_mod 12602 0
>> crc_t10dif 1276 1 sd_mod
>> cdrom 29415 1 sr_mod
>> usbhid 33260 0
>> hid 62857 1 usbhid
>> ata_generic 2983 0
>> uhci_hcd 18521 0
>> ata_piix 21124 3
>> tg3 95727 0
>> libphy 14038 1 tg3
>> libata 133568 2 ata_generic,ata_piix
>> ehci_hcd 31135 0
>> scsi_mod 122101 4 sg,sd_mod,sr_mod,libata
>> thermal 11674 0
>> usbcore 121938 4 usbhid,uhci_hcd,ehci_hcd
>> nls_base 6377 1 usbcore
>> thermal_sys 11942 2 processor,thermal
>>
>> ** PCI devices:
>> 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13)
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Interrupt: pin A routed to IRQ 11
>> Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
>> Address: 00000000 Data: 0000
>> Masking: 00000000 Pending: 00000000
>> Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>> ExtTag+ RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0<512ns, L1<4us
>> ClockPM- Surprise+ LLActRep+ BwNot+
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>> RootCap: CRSVisible-
>> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>> DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
>> DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
>> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>> Compliance De-emphasis: -6dB
>> LnkSta2: Current De-emphasis Level: -6dB
>> Capabilities: [e0] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [100 v1] Advanced Error Reporting
>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>> Capabilities: [150 v1] Access Control Services
>> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
>> ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
>> Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c<?>
>>
>> 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>> Memory behind bridge: f7b00000-f7bfffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort->Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [40] Subsystem: Dell Device [1028:0293]
>> Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
>> Address: fee00000 Data: 4059
>> Masking: 00000003 Pending: 00000000
>> Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>> ExtTag+ RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>> LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0<512ns, L1<4us
>> ClockPM- Surprise+ LLActRep+ BwNot+
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>> Slot #1, PowerLimit 25.000W; Interlock- NoCompl-
>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>> Control: AttnInd Off, PwrInd Off, Power- Interlock-
>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>> Changed: MRL- PresDet+ LinkState-
>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>> RootCap: CRSVisible-
>> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>> DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
>> DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
>> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>> Compliance De-emphasis: -6dB
>> LnkSta2: Current De-emphasis Level: -6dB
>> Capabilities: [e0] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [100 v1] Advanced Error Reporting
>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>> Capabilities: [150 v1] Access Control Services
>> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
>> ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
>> Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c<?>
>> Kernel driver in use: pcieport
>>
>> 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>> I/O behind bridge: 0000d000-0000dfff
>> Memory behind bridge: f7d00000-f7efffff
>> Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort->Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [40] Subsystem: Dell Device [1028:0293]
>> Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
>> Address: fee00000 Data: 4061
>> Masking: 00000003 Pending: 00000000
>> Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>> ExtTag+ RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>> LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0<512ns, L1<4us
>> ClockPM- Surprise+ LLActRep+ BwNot+
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt+
>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>> Slot #2, PowerLimit 150.000W; Interlock- NoCompl-
>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>> Control: AttnInd Off, PwrInd Off, Power- Interlock-
>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>> Changed: MRL- PresDet+ LinkState+
>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>> RootCap: CRSVisible-
>> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>> DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
>> DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
>> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>> Compliance De-emphasis: -6dB
>> LnkSta2: Current De-emphasis Level: -6dB
>> Capabilities: [e0] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [100 v1] Advanced Error Reporting
>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>> CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>> Capabilities: [150 v1] Access Control Services
>> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
>> ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
>> Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c<?>
>> Kernel driver in use: pcieport
>>
>> 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>> Memory behind bridge: f7c00000-f7cfffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort->Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [40] Subsystem: Dell Device [1028:0293]
>> Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
>> Address: fee00000 Data: 4069
>> Masking: 00000003 Pending: 00000000
>> Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>> ExtTag+ RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>> LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0<512ns, L1<4us
>> ClockPM- Surprise+ LLActRep+ BwNot+
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>> Slot #4, PowerLimit 75.000W; Interlock- NoCompl-
>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>> Control: AttnInd Off, PwrInd Off, Power- Interlock-
>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>> Changed: MRL- PresDet+ LinkState-
>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>> RootCap: CRSVisible-
>> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>> DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
>> DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
>> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>> Compliance De-emphasis: -6dB
>> LnkSta2: Current De-emphasis Level: -6dB
>> Capabilities: [e0] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [100 v1] Advanced Error Reporting
>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>> Capabilities: [150 v1] Access Control Services
>> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
>> ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
>> Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c<?>
>> Kernel driver in use: pcieport
>>
>> 00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
>> Subsystem: Device [0028:0093]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>> ExtTag- RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>> LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
>> ClockPM- Surprise+ LLActRep+ BwNot+
>> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>> Compliance De-emphasis: -6dB
>> LnkSta2: Current De-emphasis Level: -6dB
>>
>> 00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
>> Subsystem: Device [0028:0093]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>> ExtTag- RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>> LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
>> ClockPM- Surprise+ LLActRep+ BwNot+
>> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>> Compliance De-emphasis: -6dB
>> LnkSta2: Current De-emphasis Level: -6dB
>>
>> 00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
>> Subsystem: Device [0028:0093]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>> ExtTag- RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>> LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
>> ClockPM- Surprise+ LLActRep+ BwNot+
>> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>> Compliance De-emphasis: -6dB
>> LnkSta2: Current De-emphasis Level: -6dB
>>
>> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 16
>> Region 4: I/O ports at ff20 [size=32]
>> Capabilities: [50] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: uhci_hcd
>>
>> 00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Interrupt: pin B routed to IRQ 17
>> Region 4: I/O ports at ff00 [size=32]
>> Capabilities: [50] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: uhci_hcd
>>
>> 00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Interrupt: pin C routed to IRQ 22
>> Region 4: I/O ports at fc00 [size=32]
>> Capabilities: [50] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: uhci_hcd
>>
>> 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Interrupt: pin C routed to IRQ 22
>> Region 0: Memory at f7ffa000 (32-bit, non-prefetchable) [size=1K]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [58] Debug port: BAR=1 offset=00a0
>> Capabilities: [98] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: ehci_hcd
>>
>> 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 16
>> Region 0: Memory at f7ffc000 (64-bit, non-prefetchable) [size=16K]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
>> Address: 0000000000000000 Data: 0000
>> Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>> ExtTag- RBE- FLReset+
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>> LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0<64ns, L1<1us
>> ClockPM- Surprise- LLActRep- BwNot-
>> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>> Capabilities: [100 v1] Virtual Channel
>> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
>> Arb: Fixed- WRR32- WRR64- WRR128-
>> Ctrl: ArbSelect=Fixed
>> Status: InProgress-
>> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>> Status: NegoPending- InProgress-
>> VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>> Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
>> Status: NegoPending- InProgress-
>> Capabilities: [130 v1] Root Complex Link
>> Desc: PortNumber=0f ComponentID=00 EltType=Config
>> Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
>> Addr: 00000000feda8000
>> Kernel driver in use: HDA Intel
>>
>> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>> I/O behind bridge: 00001000-00001fff
>> Memory behind bridge: f0000000-f01fffff
>> Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort->Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>> ExtTag- RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>> LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0<256ns, L1<4us
>> ClockPM- Surprise- LLActRep+ BwNot-
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>> Slot #3, PowerLimit 25.000W; Interlock- NoCompl-
>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>> Changed: MRL- PresDet- LinkState-
>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>> RootCap: CRSVisible-
>> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>> Address: fee00000 Data: 4071
>> Capabilities: [90] Subsystem: Dell Device [1028:0293]
>> Capabilities: [a0] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [100 v1] Virtual Channel
>> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
>> Arb: Fixed+ WRR32- WRR64- WRR128-
>> Ctrl: ArbSelect=Fixed
>> Status: InProgress-
>> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>> Status: NegoPending- InProgress-
>> Capabilities: [180 v1] Root Complex Link
>> Desc: PortNumber=01 ComponentID=00 EltType=Config
>> Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
>> Addr: 00000000feda8000
>> Kernel driver in use: pcieport
>>
>> 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>> Memory behind bridge: f7a00000-f7afffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort->Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>> ExtTag- RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>> LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0<256ns, L1<4us
>> ClockPM- Surprise- LLActRep+ BwNot-
>> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>> RootCap: CRSVisible-
>> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>> Address: fee00000 Data: 4079
>> Capabilities: [90] Subsystem: Dell Device [1028:0293]
>> Capabilities: [a0] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [100 v1] Virtual Channel
>> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
>> Arb: Fixed+ WRR32- WRR64- WRR128-
>> Ctrl: ArbSelect=Fixed
>> Status: InProgress-
>> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>> Status: NegoPending- InProgress-
>> Capabilities: [180 v1] Root Complex Link
>> Desc: PortNumber=06 ComponentID=00 EltType=Config
>> Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
>> Addr: 00000000feda8000
>> Kernel driver in use: pcieport
>>
>> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 23
>> Region 4: I/O ports at ff80 [size=32]
>> Capabilities: [50] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: uhci_hcd
>>
>> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Interrupt: pin B routed to IRQ 17
>> Region 4: I/O ports at ff60 [size=32]
>> Capabilities: [50] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: uhci_hcd
>>
>> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Interrupt: pin C routed to IRQ 18
>> Region 4: I/O ports at ff40 [size=32]
>> Capabilities: [50] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: uhci_hcd
>>
>> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 23
>> Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [58] Debug port: BAR=1 offset=00a0
>> Capabilities: [98] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: ehci_hcd
>>
>> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
>> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort+<SERR-<PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort->Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [50] Subsystem: Dell Device [1028:0293]
>>
>> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Capabilities: [e0] Vendor Specific Information: Len=0c<?>
>>
>> 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Interrupt: pin C routed to IRQ 20
>> Region 0: I/O ports at fe00 [size=8]
>> Region 1: I/O ports at fe10 [size=4]
>> Region 2: I/O ports at fe20 [size=8]
>> Region 3: I/O ports at fe30 [size=4]
>> Region 4: I/O ports at fec0 [size=16]
>> Region 5: I/O ports at ecc0 [size=16]
>> Capabilities: [70] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [b0] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: ata_piix
>>
>> 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Interrupt: pin C routed to IRQ 20
>> Region 0: Memory at f7ffb000 (64-bit, non-prefetchable) [size=256]
>> Region 4: I/O ports at ece0 [size=32]
>> Kernel driver in use: i801_smbus
>>
>> 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0
>> Interrupt: pin C routed to IRQ 20
>> Region 0: I/O ports at fe40 [size=8]
>> Region 1: I/O ports at fe50 [size=4]
>> Region 2: I/O ports at fe60 [size=8]
>> Region 3: I/O ports at fe70 [size=4]
>> Region 4: I/O ports at fed0 [size=16]
>> Region 5: I/O ports at ecd0 [size=16]
>> Capabilities: [70] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [b0] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: ata_piix
>>
>> 02:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV620 [FirePro 2260] [1002:95cf] (prog-if 00 [VGA controller])
>> Subsystem: ATI Technologies Inc Device [1002:2143]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 54
>> Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
>> Region 2: Memory at f7df0000 (64-bit, non-prefetchable) [size=64K]
>> Region 4: I/O ports at dc00 [size=256]
>> Expansion ROM at f7e00000 [disabled] [size=128K]
>> Capabilities: [50] Power Management version 3
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<4us, L1 unlimited
>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>> LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0<64ns, L1<1us
>> ClockPM- Surprise- LLActRep- BwNot-
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>> Compliance De-emphasis: -6dB
>> LnkSta2: Current De-emphasis Level: -6dB
>> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>> Address: 00000000fee00000 Data: 40b1
>> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010<?>
>> Kernel driver in use: fglrx_pci
>>
>> 05:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe [14e4:1681] (rev 10)
>> Subsystem: Dell Device [1028:0293]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 53
>> Region 0: Memory at f7ae0000 (64-bit, non-prefetchable) [size=64K]
>> Region 2: Memory at f7af0000 (64-bit, non-prefetchable) [size=64K]
>> Capabilities: [48] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
>> Capabilities: [40] Vital Product Data
>> Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
>> Read-only fields:
>> [PN] Part number: BCM95761
>> [EC] Engineering changes: 106679-15
>> [SN] Serial number: 0123456789
>> [MN] Manufacture ID: 31 34 65 34
>> [RV] Reserved: checksum good, 28 byte(s) reserved
>> Read/write fields:
>> [YA] Asset tag: XYZ01234567
>> [RW] Read-write area: 107 byte(s) free
>> End
>> Capabilities: [60] Vendor Specific Information: Len=6c<?>
>> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>> Address: 00000000fee00000 Data: 40a9
>> Capabilities: [cc] Express (v2) Endpoint, MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s<4us, L1 unlimited
>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 4096 bytes
>> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0<1us, L1<64us
>> ClockPM+ Surprise- LLActRep- BwNot-
>> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>> Compliance De-emphasis: -6dB
>> LnkSta2: Current De-emphasis Level: -6dB
>> Capabilities: [100 v1] Advanced Error Reporting
>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>> CESta: RxErr+ BadTLP+ BadDLLP+ Rollover- Timeout- NonFatalErr-
>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>> Capabilities: [13c v1] Virtual Channel
>> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
>> Arb: Fixed- WRR32- WRR64- WRR128-
>> Ctrl: ArbSelect=Fixed
>> Status: InProgress-
>> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>> Status: NegoPending- InProgress-
>> Capabilities: [160 v1] Device Serial Number 00-26-b9-ff-fe-8e-72-49
>> Capabilities: [16c v1] Power Budgeting<?>
>> Kernel driver in use: tg3
>>
>>
>> ** USB devices:
>> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 003 Device 003: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard
>> Bus 003 Device 002: ID 0461:4d22 Primax Electronics, Ltd
>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 002 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>
>>
>> -- System Information:
>> Debian Release: squeeze/sid
>> APT prefers testing
>> APT policy: (500, 'testing'), (51, 'unstable')
>> Architecture: amd64 (x86_64)
>>
>> Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/8 CPU cores)
>> Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.utf8)
>> Shell: /bin/sh linked to /bin/dash
>>
>> Versions of packages linux-image-2.6.32-5-xen-amd64 depends on:
>> ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
>> ii initramfs-tools 0.98.2 tools for generating an initramfs
>> ii linux-base 2.6.32-21 Linux image base package
>> ii module-init-tools 3.12-1 tools for managing Linux kernel mo
>>
>> Versions of packages linux-image-2.6.32-5-xen-amd64 recommends:
>> ii firmware-linux-free 2.6.32-21 Binary firmware for various driver
>>
>> Versions of packages linux-image-2.6.32-5-xen-amd64 suggests:
>> ii grub 0.97-63 GRand Unified Bootloader (dummy pa
>> pn linux-doc-2.6.32<none> (no description available)
>>
>> Versions of packages linux-image-2.6.32-5-xen-amd64 is related to:
>> pn firmware-bnx2<none> (no description available)
>> pn firmware-bnx2x<none> (no description available)
>> pn firmware-ipw2x00<none> (no description available)
>> pn firmware-ivtv<none> (no description available)
>> pn firmware-iwlwifi<none> (no description available)
>> pn firmware-linux<none> (no description available)
>> ii firmware-linux-nonfree 0.26 Binary firmware for various driver
>> pn firmware-qlogic<none> (no description available)
>> pn firmware-ralink<none> (no description available)
>> ii xen-hypervisor-4.0-amd64 [xen 4.0.1-1 The Xen Hypervisor on AMD64
>>
>> -- debconf information:
>> linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64:
>> linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64: true
>> linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64: false
>> * linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64:
>>
>>
>>
>
--
Greetz
More information about the Pkg-fglrx-devel
mailing list