[Pkg-fglrx-devel] Bug#637069: fglrx-driver caused error in syslog
merlin
phil-deb1.merlin at laposte.net
Mon Aug 8 10:06:20 UTC 2011
Package: fglrx-driver
Version: 1:11-7-4
Severity: important
in syslog i have the message :
[ 2071.138159] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt
source ff000066 is not supported on this hardware (return code = 1)
[ 2899.836828] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt
source ff000066 is not supported on this hardware (return code = 1)
[ 6065.587886] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt
source ff000066 is not supported on this hardware (return code = 1)
[ 8462.887153] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt
source ff000066 is not supported on this hardware (return code = 1)
when it happen the system became slow.
my video card is an ATI Mobility Radeon HD 3430.
-- Package-specific info:
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: ATI Technologies Inc Device 95c2
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.712575] Linux agpgart interface v0.103
[ 10.426169] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 10.522056] [fglrx] Maximum main memory to use for locked dma buffers: 1880
MBytes.
[ 10.522416] [fglrx] vendor: 1002 device: 95c2 count: 1
[ 10.522972] [fglrx] ioport: bar 1, base 0x7000, size: 0x100
[ 10.523236] [fglrx] Kernel PAT support is enabled
[ 10.523261] [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1 minors
[ 48.305440] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[ 48.306212] [fglrx] Firegl kernel thread PID: 1945
[ 48.306293] [fglrx] Firegl kernel thread PID: 1946
[ 48.306387] [fglrx] Firegl kernel thread PID: 1947
[ 48.306702] [fglrx] IRQ 50 Enabled
[ 50.401041] [fglrx] Gart USWC size:628 M.
[ 50.401044] [fglrx] Gart cacheable size:246 M.
[ 50.401050] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 50.401053] [fglrx] Reserved FB block: Unshared offset:fe02000, size:1f9000
[ 50.401055] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 57.908663] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt
source ff000066 is not supported on this hardware (return code = 1)
[ 2071.138159] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt
source ff000066 is not supported on this hardware (return code = 1)
[ 2899.836828] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt
source ff000066 is not supported on this hardware (return code = 1)
[ 6065.587886] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt
source ff000066 is not supported on this hardware (return code = 1)
[ 8462.887153] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt
source ff000066 is not supported on this hardware (return code = 1)
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1849 May 21 2009 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 30558 Dec 27 2009 /var/log/Xorg.2-6-32.log
-rw-r--r-- 1 root root 36530 Aug 4 16:44 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 35563 Aug 8 09:14 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 39.952]
X.Org X Server 1.10.2.902 (1.10.3 RC 2)
Release Date: 2011-07-01
[ 39.995] X Protocol Version 11, Revision 0
[ 39.995] Build Operating System: Linux 2.6.39-2-amd64 x86_64 Debian
[ 39.995] Current Operating System: Linux portable 2.6.39-2-amd64 #1 SMP Tue
Jul 5 02:51:22 UTC 2011 x86_64
[ 39.995] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-amd64
root=UUID=cfefa5bd-93c0-4451-818e-26207c170c14 ro quiet
[ 39.996] Build Date: 02 July 2011 10:05:17AM
[ 39.996] xorg-server 2:1.10.2.902-1 (Cyril Brulebois <kibi at debian.org>)
[ 39.996] Current version of pixman: 0.22.2
[ 39.996] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 39.996] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 39.996] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 8 09:12:29
2011
[ 40.287] (==) Using config file: "/etc/X11/xorg.conf"
[ 40.287] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 40.471] (==) ServerLayout "aticonfig Layout"
[ 40.471] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 40.471] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 40.471] (**) | |-->Device "aticonfig-Device[0]-0"
[ 40.471] (==) Automatically adding devices
[ 40.471] (==) Automatically enabling devices
[ 40.694] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 40.694] Entry deleted from font path.
[ 41.077] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 41.077] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 41.077] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 41.077] (II) Loader magic: 0x7d7f40
[ 41.077] (II) Module ABI versions:
[ 41.077] X.Org ANSI C Emulation: 0.4
[ 41.077] X.Org Video Driver: 10.0
[ 41.077] X.Org XInput driver : 12.2
[ 41.077] X.Org Server Extension : 5.0
[ 41.078] (--) PCI:*(0:1:0:0) 1002:95c2:103c:30e9 rev 0, Mem @
0x80000000/268435456, 0x98400000/65536, I/O @ 0x00007000/256, BIOS @
0x????????/131072
[ 41.078] (II) Open ACPI successful (/var/run/acpid.socket)
[ 41.078] (II) "extmod" will be loaded by default.
[ 41.078] (II) "dbe" will be loaded by default.
[ 41.078] (II) "glx" will be loaded by default.
[ 41.078] (II) "record" will be loaded by default.
[ 41.078] (II) "dri" will be loaded by default.
[ 41.078] (II) "dri2" will be loaded by default.
[ 41.079] (II) LoadModule: "extmod"
[ 41.445] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 41.454] (II) Module extmod: vendor="X.Org Foundation"
[ 41.454] compiled for 1.10.2.902, module version = 1.0.0
[ 41.454] Module class: X.Org Server Extension
[ 41.455] ABI class: X.Org Server Extension, version 5.0
[ 41.455] (II) Loading extension SELinux
[ 41.455] (II) Loading extension MIT-SCREEN-SAVER
[ 41.455] (II) Loading extension XFree86-VidModeExtension
[ 41.455] (II) Loading extension XFree86-DGA
[ 41.455] (II) Loading extension DPMS
[ 41.455] (II) Loading extension XVideo
[ 41.455] (II) Loading extension XVideo-MotionCompensation
[ 41.455] (II) Loading extension X-Resource
[ 41.455] (II) LoadModule: "dbe"
[ 41.542] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 41.563] (II) Module dbe: vendor="X.Org Foundation"
[ 41.563] compiled for 1.10.2.902, module version = 1.0.0
[ 41.563] Module class: X.Org Server Extension
[ 41.563] ABI class: X.Org Server Extension, version 5.0
[ 41.563] (II) Loading extension DOUBLE-BUFFER
[ 41.563] (II) LoadModule: "glx"
[ 41.564] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 41.957] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 41.970] compiled for 6.9.0, module version = 1.0.0
[ 41.971] (II) Loading extension GLX
[ 41.971] (II) LoadModule: "record"
[ 41.971] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 42.074] (II) Module record: vendor="X.Org Foundation"
[ 42.074] compiled for 1.10.2.902, module version = 1.13.0
[ 42.074] Module class: X.Org Server Extension
[ 42.074] ABI class: X.Org Server Extension, version 5.0
[ 42.074] (II) Loading extension RECORD
[ 42.074] (II) LoadModule: "dri"
[ 42.074] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 42.419] (II) Module dri: vendor="X.Org Foundation"
[ 42.419] compiled for 1.10.2.902, module version = 1.0.0
[ 42.419] ABI class: X.Org Server Extension, version 5.0
[ 42.419] (II) Loading extension XFree86-DRI
[ 42.419] (II) LoadModule: "dri2"
[ 42.419] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 42.571] (II) Module dri2: vendor="X.Org Foundation"
[ 42.571] compiled for 1.10.2.902, module version = 1.2.0
[ 42.571] ABI class: X.Org Server Extension, version 5.0
[ 42.571] (II) Loading extension DRI2
[ 42.571] (II) LoadModule: "fglrx"
[ 42.571] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 45.545] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 46.638] compiled for 1.4.99.906, module version = 8.87.5
[ 46.638] Module class: X.Org Video Driver
[ 46.653] (II) Loading sub module "fglrxdrm"
[ 46.653] (II) LoadModule: "fglrxdrm"
[ 46.653] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 46.692] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 46.693] compiled for 1.4.99.906, module version = 8.87.5
[ 46.693] (II) ATI Proprietary Linux Driver Version Identifier:8.87.5
[ 46.693] (II) ATI Proprietary Linux Driver Release Identifier: 8.872
[ 46.693] (II) ATI Proprietary Linux Driver Build Date: Jul 7 2011 22:42:39
[ 46.693] (++) using VT number 7
[ 46.698] (WW) Falling back to old probe method for fglrx
[ 47.157] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 47.250] (--) Chipset Supported AMD Graphics Processor (0x95C2) found
[ 47.251] (II) AMD Video driver is running on a device belonging to a group
targeted for this release
[ 47.294] (II) AMD Video driver is signed
[ 47.294] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 47.294] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 47.294] (II) fglrx(0): pEnt->device->identifier=0x235efb0
[ 47.294] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 47.335] (II) Loading sub module "vgahw"
[ 47.335] (II) LoadModule: "vgahw"
[ 47.507] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 47.557] (II) Module vgahw: vendor="X.Org Foundation"
[ 47.557] compiled for 1.10.2.902, module version = 0.1.0
[ 47.557] ABI class: X.Org Video Driver, version 10.0
[ 47.557] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 47.557] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp
pixmaps)
[ 47.557] (==) fglrx(0): Default visual is TrueColor
[ 47.557] (**) fglrx(0): Option "DPMS" "true"
[ 47.557] (==) fglrx(0): RGB weight 888
[ 47.557] (II) fglrx(0): Using 8 bits per RGB
[ 47.557] (==) fglrx(0): Buffer Tiling is ON
[ 47.606] (II) Loading sub module "fglrxdrm"
[ 47.606] (II) LoadModule: "fglrxdrm"
[ 47.606] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 47.606] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 47.606] compiled for 1.4.99.906, module version = 8.87.5
[ 47.608] ukiDynamicMajor: found major device number 251
[ 47.608] ukiDynamicMajor: found major device number 251
[ 47.608] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 47.608] ukiOpenDevice: node name is /dev/ati/card0
[ 47.608] ukiOpenDevice: open result is 11, (OK)
[ 47.608] ukiOpenByBusid: ukiOpenMinor returns 11
[ 47.608] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 47.608] (==) fglrx(0): NoAccel = NO
[ 47.608] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 47.608] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3430" (Chipset =
0x95c2)
[ 47.608] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30e9)
[ 47.608] (==) fglrx(0): board vendor info: third party graphics adapter -
NOT original ATI
[ 47.608] (--) fglrx(0): Linear framebuffer (phys) at 0x80000000
[ 47.608] (--) fglrx(0): MMIO registers at 0x98400000
[ 47.608] (--) fglrx(0): I/O port at 0x00007000
[ 47.608] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 47.654] (II) fglrx(0): AC Adapter is used
[ 47.943] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 48.040] (II) Loading sub module "vbe"
[ 48.040] (II) LoadModule: "vbe"
[ 48.040] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 48.094] (II) Module vbe: vendor="X.Org Foundation"
[ 48.094] compiled for 1.10.2.902, module version = 1.1.0
[ 48.094] ABI class: X.Org Video Driver, version 10.0
[ 48.094] (II) fglrx(0): VESA BIOS detected
[ 48.094] (II) fglrx(0): VESA VBE Version 3.0
[ 48.094] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 48.094] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 48.094] (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
[ 48.094] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI
Technologies Inc.
[ 48.094] (II) fglrx(0): VESA VBE OEM Product: M82
[ 48.094] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 48.129] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 48.129] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[ 48.129] (II) fglrx(0): PCIE card detected
[ 48.129] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 48.129] (WW) fglrx(0): board is an unknown third party board, chipset is
supported
[ 48.138] (II) fglrx(0): Using adapter: 1:0.0.
[ 48.179] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize =
0x10000000)
[ 48.306] (II) fglrx(0): Interrupt handler installed at IRQ 50.
[ 48.306] (II) fglrx(0): RandR 1.2 support is enabled!
[ 48.306] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 48.306] (==) fglrx(0): Center Mode is disabled
[ 48.306] (II) Loading sub module "fb"
[ 48.306] (II) LoadModule: "fb"
[ 48.307] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 48.462] (II) Module fb: vendor="X.Org Foundation"
[ 48.462] compiled for 1.10.2.902, module version = 1.0.0
[ 48.462] ABI class: X.Org ANSI C Emulation, version 0.4
[ 48.462] (II) Loading sub module "ddc"
[ 48.462] (II) LoadModule: "ddc"
[ 48.462] (II) Module "ddc" already built-in
[ 49.796] (II) fglrx(0): Finished Initialize PPLIB!
[ 49.925] (II) fglrx(0): Output LVDS using monitor section aticonfig-
Monitor[0]-0
[ 49.925] (II) fglrx(0): Output CRT1 has no monitor section
[ 49.925] (II) Loading sub module "ddc"
[ 49.925] (II) LoadModule: "ddc"
[ 49.925] (II) Module "ddc" already built-in
[ 49.925] (II) fglrx(0): Connected Display0: LVDS
[ 49.925] (II) fglrx(0): Display0 EDID data ---------------------------
[ 49.925] (II) fglrx(0): Manufacturer: LPL Model: a105 Serial#: 0
[ 49.925] (II) fglrx(0): Year: 2007 Week: 0
[ 49.925] (II) fglrx(0): EDID Version: 1.2
[ 49.925] (II) fglrx(0): Digital Display Input
[ 49.925] (II) fglrx(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 49.925] (II) fglrx(0): Gamma: 2.20
[ 49.925] (II) fglrx(0): No DPMS capabilities specified
[ 49.925] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 49.925] (II) fglrx(0): First detailed timing is preferred mode
[ 49.925] (II) fglrx(0): redX: 0.602 redY: 0.349 greenX: 0.323 greenY:
0.551
[ 49.925] (II) fglrx(0): blueX: 0.158 blueY: 0.141 whiteX: 0.313 whiteY:
0.329
[ 49.925] (II) fglrx(0): Manufacturer's mask: 0
[ 49.925] (II) fglrx(0): Supported detailed timing:
[ 49.925] (II) fglrx(0): clock: 96.2 MHz Image Size: 367 x 230 mm
[ 49.925] (II) fglrx(0): h_active: 1440 h_sync: 1504 h_sync_end 1536
h_blank_end 1760 h_border: 0
[ 49.925] (II) fglrx(0): v_active: 900 v_sync: 901 v_sync_end 904
v_blanking: 912 v_border: 0
[ 49.925] (II) fglrx(0): LGPhilipsLCD
[ 49.925] (II) fglrx(0): LP171WP4-TLP2
[ 49.925] (II) fglrx(0): EDID (in hex):
[ 49.925] (II) fglrx(0): 00ffffffffffff00320c05a100000000
[ 49.925] (II) fglrx(0): 00110102802517780a1c859a59528d28
[ 49.925] (II) fglrx(0): 24505400000001010101010101010101
[ 49.925] (II) fglrx(0): 0101010101019525a04051840c304020
[ 49.925] (II) fglrx(0): 13006fe6100000190000000000000000
[ 49.925] (II) fglrx(0): 00000000000000000000000000fe004c
[ 49.925] (II) fglrx(0): 475068696c6970734c43440a000000fe
[ 49.925] (II) fglrx(0): 004c503137315750342d544c5032001d
[ 49.925] (II) fglrx(0): End of Display0 EDID data --------------------
[ 49.946] (II) fglrx(0): EDID for output LVDS
[ 49.946] (II) fglrx(0): Manufacturer: LPL Model: a105 Serial#: 0
[ 49.946] (II) fglrx(0): Year: 2007 Week: 0
[ 49.946] (II) fglrx(0): EDID Version: 1.2
[ 49.946] (II) fglrx(0): Digital Display Input
[ 49.946] (II) fglrx(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 49.946] (II) fglrx(0): Gamma: 2.20
[ 49.946] (II) fglrx(0): No DPMS capabilities specified
[ 49.946] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 49.946] (II) fglrx(0): First detailed timing is preferred mode
[ 49.946] (II) fglrx(0): redX: 0.602 redY: 0.349 greenX: 0.323 greenY:
0.551
[ 49.946] (II) fglrx(0): blueX: 0.158 blueY: 0.141 whiteX: 0.313 whiteY:
0.329
[ 49.946] (II) fglrx(0): Manufacturer's mask: 0
[ 49.946] (II) fglrx(0): Supported detailed timing:
[ 49.946] (II) fglrx(0): clock: 96.2 MHz Image Size: 367 x 230 mm
[ 49.946] (II) fglrx(0): h_active: 1440 h_sync: 1504 h_sync_end 1536
h_blank_end 1760 h_border: 0
[ 49.946] (II) fglrx(0): v_active: 900 v_sync: 901 v_sync_end 904
v_blanking: 912 v_border: 0
[ 49.946] (II) fglrx(0): LGPhilipsLCD
[ 49.946] (II) fglrx(0): LP171WP4-TLP2
[ 49.946] (II) fglrx(0): EDID (in hex):
[ 49.946] (II) fglrx(0): 00ffffffffffff00320c05a100000000
[ 49.946] (II) fglrx(0): 00110102802517780a1c859a59528d28
[ 49.946] (II) fglrx(0): 24505400000001010101010101010101
[ 49.946] (II) fglrx(0): 0101010101019525a04051840c304020
[ 49.946] (II) fglrx(0): 13006fe6100000190000000000000000
[ 49.946] (II) fglrx(0): 00000000000000000000000000fe004c
[ 49.946] (II) fglrx(0): 475068696c6970734c43440a000000fe
[ 49.946] (II) fglrx(0): 004c503137315750342d544c5032001d
[ 49.946] (II) fglrx(0): EDID vendor "LPL", prod id 41221
[ 49.946] (II) fglrx(0): Printing DDC gathered Modelines:
[ 49.946] (II) fglrx(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536
1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 50.061] (II) fglrx(0): Printing probed modes for output LVDS
[ 50.399] (II) fglrx(0): Modeline "1440x900"x60.0 96.21 1440 1504 1536
1760 900 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1280x800"x60.0 96.21 1280 1504 1536
1760 800 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1152x864"x60.0 96.21 1152 1504 1536
1760 864 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1280x768"x60.0 96.21 1280 1504 1536
1760 768 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1280x720"x60.0 96.21 1280 1504 1536
1760 720 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1024x768"x60.0 96.21 1024 1504 1536
1760 768 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1024x600"x60.0 96.21 1024 1504 1536
1760 600 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1024x480"x60.0 96.21 1024 1504 1536
1760 480 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "800x600"x60.0 96.21 800 1504 1536 1760
600 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "800x480"x60.0 96.21 800 1504 1536 1760
480 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "640x480"x60.0 96.21 640 1504 1536 1760
480 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): EDID for output CRT1
[ 50.399] (II) fglrx(0): Output LVDS connected
[ 50.399] (II) fglrx(0): Output CRT1 disconnected
[ 50.399] (II) fglrx(0): Using exact sizes for initial modes
[ 50.399] (II) fglrx(0): Output LVDS using initial mode 1440x900
[ 50.399] (II) fglrx(0): Display dimensions: (370, 230) mm
[ 50.399] (II) fglrx(0): DPI set to (99, 99)
[ 50.399] (II) fglrx(0): Adapter ATI Mobility Radeon HD 3430 has 2
configurable heads and 1 displays connected.
[ 50.400] (==) fglrx(0): PseudoColor visuals disabled
[ 50.400] (II) Loading sub module "ramdac"
[ 50.400] (II) LoadModule: "ramdac"
[ 50.400] (II) Module "ramdac" already built-in
[ 50.400] (==) fglrx(0): NoDRI = NO
[ 50.400] (==) fglrx(0): Capabilities: 0x00000000
[ 50.400] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 50.400] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 50.400] (==) fglrx(0): UseFastTLS=0
[ 50.400] (==) fglrx(0): BlockSignalsOnLock=1
[ 50.400] (--) Depth 24 pixmap format is 32 bpp
[ 50.400] (II) Loading extension ATIFGLRXDRI
[ 50.400] (II) fglrx(0): doing swlDriScreenInit
[ 50.400] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 50.400] ukiDynamicMajor: found major device number 251
[ 50.400] ukiDynamicMajor: found major device number 251
[ 50.400] ukiDynamicMajor: found major device number 251
[ 50.400] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 50.400] ukiOpenDevice: node name is /dev/ati/card0
[ 50.400] ukiOpenDevice: open result is 16, (OK)
[ 50.400] ukiOpenByBusid: ukiOpenMinor returns 16
[ 50.400] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 50.400] (II) fglrx(0): [uki] DRM interface version 1.0
[ 50.400] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 50.400] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 50.400] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f6171a75000
[ 50.400] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 50.400] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 50.400] (II) fglrx(0): swlDriScreenInit done
[ 50.400] (II) fglrx(0): Kernel Module Version Information:
[ 50.400] (II) fglrx(0): Name: fglrx
[ 50.400] (II) fglrx(0): Version: 8.87.5
[ 50.400] (II) fglrx(0): Date: Jul 7 2011
[ 50.400] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 50.400] (II) fglrx(0): Kernel Module version matches driver.
[ 50.400] (II) fglrx(0): Kernel Module Build Time Information:
[ 50.400] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.39-2-amd64
[ 50.400] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 50.400] (II) fglrx(0): Build-Kernel __SMP__: no
[ 50.400] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 50.401] (II) fglrx(0): [uki] register handle = 0x00004000
[ 50.505] (II) fglrx(0): DRI initialization successfull
[ 50.505] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
[ 50.561] (==) fglrx(0): Backing store disabled
[ 50.561] (II) Loading extension FGLRXEXTENSION
[ 50.561] (**) fglrx(0): DPMS enabled
[ 50.562] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 50.562] (**) fglrx(0): Textured Video is enabled.
[ 50.562] (II) LoadModule: "glesx"
[ 50.562] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 51.024] (II) Module glesx: vendor="X.Org Foundation"
[ 51.024] compiled for 1.4.99.906, module version = 1.0.0
[ 51.024] (II) Loading extension GLESX
[ 51.024] (II) fglrx(0): GLESX enableFlags = 528
[ 51.025] (II) fglrx(0): GLESX is enabled
[ 51.025] (II) LoadModule: "amdxmm"
[ 51.025] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 51.344] (II) Module amdxmm: vendor="X.Org Foundation"
[ 51.344] compiled for 1.4.99.906, module version = 2.0.0
[ 51.344] (II) Loading extension AMDXVOPL
[ 51.344] (II) Loading extension AMDXVBA
[ 51.399] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 51.402] (II) fglrx(0): Enable composite support successfully
[ 51.425] (WW) fglrx(0): Option "VendorName" is not used
[ 51.425] (WW) fglrx(0): Option "ModelName" is not used
[ 51.425] (II) fglrx(0): X context handle = 0x1
[ 51.425] (II) fglrx(0): [DRI] installation complete
[ 51.425] (==) fglrx(0): Silken mouse enabled
[ 51.463] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 51.463] (II) fglrx(0): Disabling in-server RandR and enabling in-driver
RandR 1.2.
[ 51.463] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 51.463] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 51.998] (--) RandR disabled
[ 51.998] (II) Initializing built-in extension Generic Event Extension
[ 51.998] (II) Initializing built-in extension SHAPE
[ 51.998] (II) Initializing built-in extension MIT-SHM
[ 51.998] (II) Initializing built-in extension XInputExtension
[ 51.998] (II) Initializing built-in extension XTEST
[ 51.998] (II) Initializing built-in extension BIG-REQUESTS
[ 51.998] (II) Initializing built-in extension SYNC
[ 51.998] (II) Initializing built-in extension XKEYBOARD
[ 51.998] (II) Initializing built-in extension XC-MISC
[ 51.998] (II) Initializing built-in extension SECURITY
[ 51.998] (II) Initializing built-in extension XINERAMA
[ 51.998] (II) Initializing built-in extension XFIXES
[ 51.998] (II) Initializing built-in extension RENDER
[ 51.998] (II) Initializing built-in extension RANDR
[ 51.998] (II) Initializing built-in extension COMPOSITE
[ 51.998] (II) Initializing built-in extension DAMAGE
[ 51.998] (II) SELinux: Disabled on system
[ 52.000] ukiDynamicMajor: found major device number 251
[ 52.000] ukiDynamicMajor: found major device number 251
[ 52.000] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 52.000] ukiOpenDevice: node name is /dev/ati/card0
[ 52.000] ukiOpenDevice: open result is 17, (OK)
[ 52.000] ukiOpenByBusid: ukiOpenMinor returns 17
[ 52.000] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 55.306] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX:
Initialized DRI GL provider for screen 0
[ 55.575] (II) fglrx(0): Enable the clock gating!
[ 55.575] (II) fglrx(0): Setting screen physical size to 381 x 238
[ 57.207] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 57.207] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 57.207] (II) LoadModule: "evdev"
[ 57.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.327] (II) Module evdev: vendor="X.Org Foundation"
[ 57.327] compiled for 1.10.1, module version = 2.6.0
[ 57.327] Module class: X.Org XInput Driver
[ 57.327] ABI class: X.Org XInput driver, version 12.2
[ 57.327] (II) Using input driver 'evdev' for 'Power Button'
[ 57.327] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.327] (**) Power Button: always reports core events
[ 57.327] (**) Power Button: Device: "/dev/input/event3"
[ 57.328] (--) Power Button: Found keys
[ 57.328] (II) Power Button: Configuring as keyboard
[ 57.328] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 57.328] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD)
[ 57.328] (**) Option "xkb_rules" "evdev"
[ 57.328] (**) Option "xkb_model" "pc105"
[ 57.328] (**) Option "xkb_layout" "fr"
[ 57.328] (**) Option "xkb_variant" "latin9"
[ 57.328] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.543] (II) config/udev: Adding input device Video Bus
(/dev/input/event8)
[ 57.543] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 57.543] (II) Using input driver 'evdev' for 'Video Bus'
[ 57.543] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.543] (**) Video Bus: always reports core events
[ 57.543] (**) Video Bus: Device: "/dev/input/event8"
[ 57.548] (--) Video Bus: Found keys
[ 57.548] (II) Video Bus: Configuring as keyboard
[ 57.548] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8/event8"
[ 57.548] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD)
[ 57.548] (**) Option "xkb_rules" "evdev"
[ 57.548] (**) Option "xkb_model" "pc105"
[ 57.548] (**) Option "xkb_layout" "fr"
[ 57.548] (**) Option "xkb_variant" "latin9"
[ 57.548] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.552] (II) config/udev: Adding input device Lid Switch
(/dev/input/event2)
[ 57.552] (II) No input driver/identifier specified (ignoring)
[ 57.553] (II) config/udev: Adding input device Sleep Button
(/dev/input/event1)
[ 57.553] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 57.553] (II) Using input driver 'evdev' for 'Sleep Button'
[ 57.553] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.553] (**) Sleep Button: always reports core events
[ 57.553] (**) Sleep Button: Device: "/dev/input/event1"
[ 57.572] (--) Sleep Button: Found keys
[ 57.572] (II) Sleep Button: Configuring as keyboard
[ 57.572] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 57.572] (II) XINPUT: Adding extended input device "Sleep Button" (type:
KEYBOARD)
[ 57.572] (**) Option "xkb_rules" "evdev"
[ 57.572] (**) Option "xkb_model" "pc105"
[ 57.572] (**) Option "xkb_layout" "fr"
[ 57.572] (**) Option "xkb_variant" "latin9"
[ 57.572] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.575] (II) config/udev: Adding input device CKF7063 (/dev/input/event9)
[ 57.575] (**) CKF7063: Applying InputClass "evdev keyboard catchall"
[ 57.575] (II) Using input driver 'evdev' for 'CKF7063'
[ 57.575] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.575] (**) CKF7063: always reports core events
[ 57.575] (**) CKF7063: Device: "/dev/input/event9"
[ 57.584] (--) CKF7063: Found keys
[ 57.584] (II) CKF7063: Configuring as keyboard
[ 57.584] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input9/event9"
[ 57.584] (II) XINPUT: Adding extended input device "CKF7063" (type:
KEYBOARD)
[ 57.584] (**) Option "xkb_rules" "evdev"
[ 57.584] (**) Option "xkb_model" "pc105"
[ 57.584] (**) Option "xkb_layout" "fr"
[ 57.584] (**) Option "xkb_variant" "latin9"
[ 57.584] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.584] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event10)
[ 57.584] (II) No input driver/identifier specified (ignoring)
[ 57.588] (II) config/udev: Adding input device USB Optical Mouse
(/dev/input/event11)
[ 57.588] (**) USB Optical Mouse: Applying InputClass "evdev pointer
catchall"
[ 57.588] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 57.588] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.588] (**) USB Optical Mouse: always reports core events
[ 57.588] (**) USB Optical Mouse: Device: "/dev/input/event11"
[ 57.596] (--) USB Optical Mouse: Found 3 mouse buttons
[ 57.596] (--) USB Optical Mouse: Found scroll wheel(s)
[ 57.596] (--) USB Optical Mouse: Found relative axes
[ 57.596] (--) USB Optical Mouse: Found x and y relative axes
[ 57.596] (II) USB Optical Mouse: Configuring as mouse
[ 57.596] (II) USB Optical Mouse: Adding scrollwheel support
[ 57.596] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 57.596] (**) USB Optical Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 57.596] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input11/event11"
[ 57.596] (II) XINPUT: Adding extended input device "USB Optical Mouse"
(type: MOUSE)
[ 57.596] (II) USB Optical Mouse: initialized for relative axes.
[ 57.596] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 57.596] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 57.596] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 57.596] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 57.596] (II) config/udev: Adding input device USB Optical Mouse
(/dev/input/mouse1)
[ 57.596] (II) No input driver/identifier specified (ignoring)
[ 57.600] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 57.600] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 57.600] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 57.600] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.600] (**) AT Translated Set 2 keyboard: always reports core events
[ 57.600] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 57.600] (--) AT Translated Set 2 keyboard: Found keys
[ 57.600] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 57.600] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 57.600] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD)
[ 57.600] (**) Option "xkb_rules" "evdev"
[ 57.600] (**) Option "xkb_model" "pc105"
[ 57.600] (**) Option "xkb_layout" "fr"
[ 57.600] (**) Option "xkb_variant" "latin9"
[ 57.600] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.601] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event7)
[ 57.601] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[ 57.601] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[ 57.601] (II) LoadModule: "synaptics"
[ 57.601] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 57.767] (II) Module synaptics: vendor="X.Org Foundation"
[ 57.767] compiled for 1.10.2, module version = 1.4.1
[ 57.767] Module class: X.Org XInput Driver
[ 57.767] ABI class: X.Org XInput driver, version 12.2
[ 57.767] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics
TouchPad'
[ 57.767] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 57.767] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 57.767] (**) Option "Device" "/dev/input/event7"
[ 57.816] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 57.816] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 57.816] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 57.816] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 57.816] (--) SynPS/2 Synaptics TouchPad: buttons: left right
[ 57.832] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 57.832] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 57.856] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[ 57.856] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics
TouchPad" (type: TOUCHPAD)
[ 57.856] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant
deceleration 2.5
[ 57.856] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 57.856] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 57.856] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration
scheme 1
[ 57.856] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 57.856] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor:
2.000
[ 57.856] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 57.872] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 57.872] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse0)
[ 57.872] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[ 57.872] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics
TouchPad'
[ 57.872] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 57.872] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 57.872] (**) Option "Device" "/dev/input/mouse0"
[ 57.876] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range. defaulting
to 1615 - 5685
[ 57.876] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range. defaulting
to 1729 - 4171
[ 57.876] (--) SynPS/2 Synaptics TouchPad: invalid pressure range.
defaulting to 0 - 256
[ 57.876] (--) SynPS/2 Synaptics TouchPad: invalid finger width range.
defaulting to 0 - 16
[ 57.896] (EE) Query no Synaptics: 6003C8
[ 57.896] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 57.896] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize
Synaptics hardware.
[ 57.896] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[ 57.896] (II) UnloadModule: "synaptics"
[ 57.896] (II) Unloading synaptics
[ 57.896] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer
(/dev/input/event4)
[ 57.896] (II) No input driver/identifier specified (ignoring)
[ 57.897] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer
(/dev/input/js0)
[ 57.897] (II) No input driver/identifier specified (ignoring)
[ 57.897] (II) config/udev: Adding input device PC Speaker
(/dev/input/event5)
[ 57.897] (II) No input driver/identifier specified (ignoring)
[ 57.900] (II) config/udev: Adding input device HP WMI hotkeys
(/dev/input/event6)
[ 57.900] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 57.900] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 57.900] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.900] (**) HP WMI hotkeys: always reports core events
[ 57.900] (**) HP WMI hotkeys: Device: "/dev/input/event6"
[ 57.900] (--) HP WMI hotkeys: Found keys
[ 57.900] (II) HP WMI hotkeys: Configuring as keyboard
[ 57.900] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input6/event6"
[ 57.900] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type:
KEYBOARD)
[ 57.900] (**) Option "xkb_rules" "evdev"
[ 57.900] (**) Option "xkb_model" "pc105"
[ 57.900] (**) Option "xkb_layout" "fr"
[ 57.900] (**) Option "xkb_variant" "latin9"
[ 57.900] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.918] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in
RANDR 1.2 capable environments
[ 131.912] Warning: LookupWindow()/SecurityLookupWindow() are deprecated.
Please convert your driver/module to use dixLookupWindow().
[ 132.324] (II) fglrx(0): EDID vendor "LPL", prod id 41221
[ 132.324] (II) fglrx(0): Printing DDC gathered Modelines:
[ 132.324] (II) fglrx(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536
1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 173.625] (II) fglrx(0): EDID vendor "LPL", prod id 41221
[ 173.625] (II) fglrx(0): Printing DDC gathered Modelines:
[ 173.625] (II) fglrx(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536
1760 900 901 904 912 -hsync -vsync (54.7 kHz)
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.39-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages fglrx-driver depends on:
ii glx-alternative-fglrx 0.1.91 allows the selection of FGLRX as G
ii libc6 2.13-14 Embedded GNU C Library: Shared lib
ii libgcc1 1:4.6.1-5 GCC support library
ii libgl1-mesa-glx [libgl1] 7.10.3-3 free implementation of the OpenGL
ii libstdc++6 4.6.1-5 GNU Standard C++ Library v3
ii libx11-6 2:1.4.4-1 X11 client-side library
ii libxext6 2:1.3.0-3 X11 miscellaneous extension librar
ii libxinerama1 2:1.1.1-3 X11 Xinerama extension library
ii libxrandr2 2:1.3.2-2 X11 RandR extension library
ii libxrender1 1:0.9.6-2 X Rendering Extension client libra
ii xserver-xorg-core [xorg-v 2:1.10.2.902-1 Xorg X server - core server
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:11-7-4 external events daemon for the non
ii fglrx-glx 1:11-7-4 proprietary libGL for the non-free
ii fglrx-glx-ia32 1:11-7-4 proprietary libGL for the non-free
ii fglrx-modules-dkms 1:11-7-4 dkms module source for the non-fre
Versions of packages fglrx-driver suggests:
ii fglrx-control 1:11-7-4 control panel for the non-free ATI
pn xvba-va-driver <none> (no description available)
-- debconf information:
fglrx-driver/acpi_switch: false
-------------- next part --------------
[ 39.952]
X.Org X Server 1.10.2.902 (1.10.3 RC 2)
Release Date: 2011-07-01
[ 39.995] X Protocol Version 11, Revision 0
[ 39.995] Build Operating System: Linux 2.6.39-2-amd64 x86_64 Debian
[ 39.995] Current Operating System: Linux portable 2.6.39-2-amd64 #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64
[ 39.995] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-amd64 root=UUID=cfefa5bd-93c0-4451-818e-26207c170c14 ro quiet
[ 39.996] Build Date: 02 July 2011 10:05:17AM
[ 39.996] xorg-server 2:1.10.2.902-1 (Cyril Brulebois <kibi at debian.org>)
[ 39.996] Current version of pixman: 0.22.2
[ 39.996] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 39.996] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 39.996] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 8 09:12:29 2011
[ 40.287] (==) Using config file: "/etc/X11/xorg.conf"
[ 40.287] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 40.471] (==) ServerLayout "aticonfig Layout"
[ 40.471] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 40.471] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 40.471] (**) | |-->Device "aticonfig-Device[0]-0"
[ 40.471] (==) Automatically adding devices
[ 40.471] (==) Automatically enabling devices
[ 40.694] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 40.694] Entry deleted from font path.
[ 41.077] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 41.077] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 41.077] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 41.077] (II) Loader magic: 0x7d7f40
[ 41.077] (II) Module ABI versions:
[ 41.077] X.Org ANSI C Emulation: 0.4
[ 41.077] X.Org Video Driver: 10.0
[ 41.077] X.Org XInput driver : 12.2
[ 41.077] X.Org Server Extension : 5.0
[ 41.078] (--) PCI:*(0:1:0:0) 1002:95c2:103c:30e9 rev 0, Mem @ 0x80000000/268435456, 0x98400000/65536, I/O @ 0x00007000/256, BIOS @ 0x????????/131072
[ 41.078] (II) Open ACPI successful (/var/run/acpid.socket)
[ 41.078] (II) "extmod" will be loaded by default.
[ 41.078] (II) "dbe" will be loaded by default.
[ 41.078] (II) "glx" will be loaded by default.
[ 41.078] (II) "record" will be loaded by default.
[ 41.078] (II) "dri" will be loaded by default.
[ 41.078] (II) "dri2" will be loaded by default.
[ 41.079] (II) LoadModule: "extmod"
[ 41.445] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 41.454] (II) Module extmod: vendor="X.Org Foundation"
[ 41.454] compiled for 1.10.2.902, module version = 1.0.0
[ 41.454] Module class: X.Org Server Extension
[ 41.455] ABI class: X.Org Server Extension, version 5.0
[ 41.455] (II) Loading extension SELinux
[ 41.455] (II) Loading extension MIT-SCREEN-SAVER
[ 41.455] (II) Loading extension XFree86-VidModeExtension
[ 41.455] (II) Loading extension XFree86-DGA
[ 41.455] (II) Loading extension DPMS
[ 41.455] (II) Loading extension XVideo
[ 41.455] (II) Loading extension XVideo-MotionCompensation
[ 41.455] (II) Loading extension X-Resource
[ 41.455] (II) LoadModule: "dbe"
[ 41.542] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 41.563] (II) Module dbe: vendor="X.Org Foundation"
[ 41.563] compiled for 1.10.2.902, module version = 1.0.0
[ 41.563] Module class: X.Org Server Extension
[ 41.563] ABI class: X.Org Server Extension, version 5.0
[ 41.563] (II) Loading extension DOUBLE-BUFFER
[ 41.563] (II) LoadModule: "glx"
[ 41.564] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 41.957] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 41.970] compiled for 6.9.0, module version = 1.0.0
[ 41.971] (II) Loading extension GLX
[ 41.971] (II) LoadModule: "record"
[ 41.971] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 42.074] (II) Module record: vendor="X.Org Foundation"
[ 42.074] compiled for 1.10.2.902, module version = 1.13.0
[ 42.074] Module class: X.Org Server Extension
[ 42.074] ABI class: X.Org Server Extension, version 5.0
[ 42.074] (II) Loading extension RECORD
[ 42.074] (II) LoadModule: "dri"
[ 42.074] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 42.419] (II) Module dri: vendor="X.Org Foundation"
[ 42.419] compiled for 1.10.2.902, module version = 1.0.0
[ 42.419] ABI class: X.Org Server Extension, version 5.0
[ 42.419] (II) Loading extension XFree86-DRI
[ 42.419] (II) LoadModule: "dri2"
[ 42.419] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 42.571] (II) Module dri2: vendor="X.Org Foundation"
[ 42.571] compiled for 1.10.2.902, module version = 1.2.0
[ 42.571] ABI class: X.Org Server Extension, version 5.0
[ 42.571] (II) Loading extension DRI2
[ 42.571] (II) LoadModule: "fglrx"
[ 42.571] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 45.545] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 46.638] compiled for 1.4.99.906, module version = 8.87.5
[ 46.638] Module class: X.Org Video Driver
[ 46.653] (II) Loading sub module "fglrxdrm"
[ 46.653] (II) LoadModule: "fglrxdrm"
[ 46.653] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 46.692] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 46.693] compiled for 1.4.99.906, module version = 8.87.5
[ 46.693] (II) ATI Proprietary Linux Driver Version Identifier:8.87.5
[ 46.693] (II) ATI Proprietary Linux Driver Release Identifier: 8.872
[ 46.693] (II) ATI Proprietary Linux Driver Build Date: Jul 7 2011 22:42:39
[ 46.693] (++) using VT number 7
[ 46.698] (WW) Falling back to old probe method for fglrx
[ 47.157] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 47.250] (--) Chipset Supported AMD Graphics Processor (0x95C2) found
[ 47.251] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 47.294] (II) AMD Video driver is signed
[ 47.294] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 47.294] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 47.294] (II) fglrx(0): pEnt->device->identifier=0x235efb0
[ 47.294] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 47.335] (II) Loading sub module "vgahw"
[ 47.335] (II) LoadModule: "vgahw"
[ 47.507] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 47.557] (II) Module vgahw: vendor="X.Org Foundation"
[ 47.557] compiled for 1.10.2.902, module version = 0.1.0
[ 47.557] ABI class: X.Org Video Driver, version 10.0
[ 47.557] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 47.557] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 47.557] (==) fglrx(0): Default visual is TrueColor
[ 47.557] (**) fglrx(0): Option "DPMS" "true"
[ 47.557] (==) fglrx(0): RGB weight 888
[ 47.557] (II) fglrx(0): Using 8 bits per RGB
[ 47.557] (==) fglrx(0): Buffer Tiling is ON
[ 47.606] (II) Loading sub module "fglrxdrm"
[ 47.606] (II) LoadModule: "fglrxdrm"
[ 47.606] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 47.606] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 47.606] compiled for 1.4.99.906, module version = 8.87.5
[ 47.608] ukiDynamicMajor: found major device number 251
[ 47.608] ukiDynamicMajor: found major device number 251
[ 47.608] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 47.608] ukiOpenDevice: node name is /dev/ati/card0
[ 47.608] ukiOpenDevice: open result is 11, (OK)
[ 47.608] ukiOpenByBusid: ukiOpenMinor returns 11
[ 47.608] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 47.608] (==) fglrx(0): NoAccel = NO
[ 47.608] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 47.608] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3430" (Chipset = 0x95c2)
[ 47.608] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30e9)
[ 47.608] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 47.608] (--) fglrx(0): Linear framebuffer (phys) at 0x80000000
[ 47.608] (--) fglrx(0): MMIO registers at 0x98400000
[ 47.608] (--) fglrx(0): I/O port at 0x00007000
[ 47.608] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 47.654] (II) fglrx(0): AC Adapter is used
[ 47.943] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 48.040] (II) Loading sub module "vbe"
[ 48.040] (II) LoadModule: "vbe"
[ 48.040] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 48.094] (II) Module vbe: vendor="X.Org Foundation"
[ 48.094] compiled for 1.10.2.902, module version = 1.1.0
[ 48.094] ABI class: X.Org Video Driver, version 10.0
[ 48.094] (II) fglrx(0): VESA BIOS detected
[ 48.094] (II) fglrx(0): VESA VBE Version 3.0
[ 48.094] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 48.094] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 48.094] (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
[ 48.094] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 48.094] (II) fglrx(0): VESA VBE OEM Product: M82
[ 48.094] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 48.129] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 48.129] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[ 48.129] (II) fglrx(0): PCIE card detected
[ 48.129] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 48.129] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 48.138] (II) fglrx(0): Using adapter: 1:0.0.
[ 48.179] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 48.306] (II) fglrx(0): Interrupt handler installed at IRQ 50.
[ 48.306] (II) fglrx(0): RandR 1.2 support is enabled!
[ 48.306] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 48.306] (==) fglrx(0): Center Mode is disabled
[ 48.306] (II) Loading sub module "fb"
[ 48.306] (II) LoadModule: "fb"
[ 48.307] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 48.462] (II) Module fb: vendor="X.Org Foundation"
[ 48.462] compiled for 1.10.2.902, module version = 1.0.0
[ 48.462] ABI class: X.Org ANSI C Emulation, version 0.4
[ 48.462] (II) Loading sub module "ddc"
[ 48.462] (II) LoadModule: "ddc"
[ 48.462] (II) Module "ddc" already built-in
[ 49.796] (II) fglrx(0): Finished Initialize PPLIB!
[ 49.925] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 49.925] (II) fglrx(0): Output CRT1 has no monitor section
[ 49.925] (II) Loading sub module "ddc"
[ 49.925] (II) LoadModule: "ddc"
[ 49.925] (II) Module "ddc" already built-in
[ 49.925] (II) fglrx(0): Connected Display0: LVDS
[ 49.925] (II) fglrx(0): Display0 EDID data ---------------------------
[ 49.925] (II) fglrx(0): Manufacturer: LPL Model: a105 Serial#: 0
[ 49.925] (II) fglrx(0): Year: 2007 Week: 0
[ 49.925] (II) fglrx(0): EDID Version: 1.2
[ 49.925] (II) fglrx(0): Digital Display Input
[ 49.925] (II) fglrx(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 49.925] (II) fglrx(0): Gamma: 2.20
[ 49.925] (II) fglrx(0): No DPMS capabilities specified
[ 49.925] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 49.925] (II) fglrx(0): First detailed timing is preferred mode
[ 49.925] (II) fglrx(0): redX: 0.602 redY: 0.349 greenX: 0.323 greenY: 0.551
[ 49.925] (II) fglrx(0): blueX: 0.158 blueY: 0.141 whiteX: 0.313 whiteY: 0.329
[ 49.925] (II) fglrx(0): Manufacturer's mask: 0
[ 49.925] (II) fglrx(0): Supported detailed timing:
[ 49.925] (II) fglrx(0): clock: 96.2 MHz Image Size: 367 x 230 mm
[ 49.925] (II) fglrx(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 49.925] (II) fglrx(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 49.925] (II) fglrx(0): LGPhilipsLCD
[ 49.925] (II) fglrx(0): LP171WP4-TLP2
[ 49.925] (II) fglrx(0): EDID (in hex):
[ 49.925] (II) fglrx(0): 00ffffffffffff00320c05a100000000
[ 49.925] (II) fglrx(0): 00110102802517780a1c859a59528d28
[ 49.925] (II) fglrx(0): 24505400000001010101010101010101
[ 49.925] (II) fglrx(0): 0101010101019525a04051840c304020
[ 49.925] (II) fglrx(0): 13006fe6100000190000000000000000
[ 49.925] (II) fglrx(0): 00000000000000000000000000fe004c
[ 49.925] (II) fglrx(0): 475068696c6970734c43440a000000fe
[ 49.925] (II) fglrx(0): 004c503137315750342d544c5032001d
[ 49.925] (II) fglrx(0): End of Display0 EDID data --------------------
[ 49.946] (II) fglrx(0): EDID for output LVDS
[ 49.946] (II) fglrx(0): Manufacturer: LPL Model: a105 Serial#: 0
[ 49.946] (II) fglrx(0): Year: 2007 Week: 0
[ 49.946] (II) fglrx(0): EDID Version: 1.2
[ 49.946] (II) fglrx(0): Digital Display Input
[ 49.946] (II) fglrx(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 49.946] (II) fglrx(0): Gamma: 2.20
[ 49.946] (II) fglrx(0): No DPMS capabilities specified
[ 49.946] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 49.946] (II) fglrx(0): First detailed timing is preferred mode
[ 49.946] (II) fglrx(0): redX: 0.602 redY: 0.349 greenX: 0.323 greenY: 0.551
[ 49.946] (II) fglrx(0): blueX: 0.158 blueY: 0.141 whiteX: 0.313 whiteY: 0.329
[ 49.946] (II) fglrx(0): Manufacturer's mask: 0
[ 49.946] (II) fglrx(0): Supported detailed timing:
[ 49.946] (II) fglrx(0): clock: 96.2 MHz Image Size: 367 x 230 mm
[ 49.946] (II) fglrx(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 49.946] (II) fglrx(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 49.946] (II) fglrx(0): LGPhilipsLCD
[ 49.946] (II) fglrx(0): LP171WP4-TLP2
[ 49.946] (II) fglrx(0): EDID (in hex):
[ 49.946] (II) fglrx(0): 00ffffffffffff00320c05a100000000
[ 49.946] (II) fglrx(0): 00110102802517780a1c859a59528d28
[ 49.946] (II) fglrx(0): 24505400000001010101010101010101
[ 49.946] (II) fglrx(0): 0101010101019525a04051840c304020
[ 49.946] (II) fglrx(0): 13006fe6100000190000000000000000
[ 49.946] (II) fglrx(0): 00000000000000000000000000fe004c
[ 49.946] (II) fglrx(0): 475068696c6970734c43440a000000fe
[ 49.946] (II) fglrx(0): 004c503137315750342d544c5032001d
[ 49.946] (II) fglrx(0): EDID vendor "LPL", prod id 41221
[ 49.946] (II) fglrx(0): Printing DDC gathered Modelines:
[ 49.946] (II) fglrx(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 50.061] (II) fglrx(0): Printing probed modes for output LVDS
[ 50.399] (II) fglrx(0): Modeline "1440x900"x60.0 96.21 1440 1504 1536 1760 900 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1280x800"x60.0 96.21 1280 1504 1536 1760 800 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1152x864"x60.0 96.21 1152 1504 1536 1760 864 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1280x768"x60.0 96.21 1280 1504 1536 1760 768 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1280x720"x60.0 96.21 1280 1504 1536 1760 720 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1024x768"x60.0 96.21 1024 1504 1536 1760 768 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1024x600"x60.0 96.21 1024 1504 1536 1760 600 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "1024x480"x60.0 96.21 1024 1504 1536 1760 480 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "800x600"x60.0 96.21 800 1504 1536 1760 600 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "800x480"x60.0 96.21 800 1504 1536 1760 480 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): Modeline "640x480"x60.0 96.21 640 1504 1536 1760 480 901 904 912 +hsync +vsync (54.7 kHz)
[ 50.399] (II) fglrx(0): EDID for output CRT1
[ 50.399] (II) fglrx(0): Output LVDS connected
[ 50.399] (II) fglrx(0): Output CRT1 disconnected
[ 50.399] (II) fglrx(0): Using exact sizes for initial modes
[ 50.399] (II) fglrx(0): Output LVDS using initial mode 1440x900
[ 50.399] (II) fglrx(0): Display dimensions: (370, 230) mm
[ 50.399] (II) fglrx(0): DPI set to (99, 99)
[ 50.399] (II) fglrx(0): Adapter ATI Mobility Radeon HD 3430 has 2 configurable heads and 1 displays connected.
[ 50.400] (==) fglrx(0): PseudoColor visuals disabled
[ 50.400] (II) Loading sub module "ramdac"
[ 50.400] (II) LoadModule: "ramdac"
[ 50.400] (II) Module "ramdac" already built-in
[ 50.400] (==) fglrx(0): NoDRI = NO
[ 50.400] (==) fglrx(0): Capabilities: 0x00000000
[ 50.400] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 50.400] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 50.400] (==) fglrx(0): UseFastTLS=0
[ 50.400] (==) fglrx(0): BlockSignalsOnLock=1
[ 50.400] (--) Depth 24 pixmap format is 32 bpp
[ 50.400] (II) Loading extension ATIFGLRXDRI
[ 50.400] (II) fglrx(0): doing swlDriScreenInit
[ 50.400] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 50.400] ukiDynamicMajor: found major device number 251
[ 50.400] ukiDynamicMajor: found major device number 251
[ 50.400] ukiDynamicMajor: found major device number 251
[ 50.400] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 50.400] ukiOpenDevice: node name is /dev/ati/card0
[ 50.400] ukiOpenDevice: open result is 16, (OK)
[ 50.400] ukiOpenByBusid: ukiOpenMinor returns 16
[ 50.400] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 50.400] (II) fglrx(0): [uki] DRM interface version 1.0
[ 50.400] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 50.400] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 50.400] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f6171a75000
[ 50.400] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 50.400] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 50.400] (II) fglrx(0): swlDriScreenInit done
[ 50.400] (II) fglrx(0): Kernel Module Version Information:
[ 50.400] (II) fglrx(0): Name: fglrx
[ 50.400] (II) fglrx(0): Version: 8.87.5
[ 50.400] (II) fglrx(0): Date: Jul 7 2011
[ 50.400] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 50.400] (II) fglrx(0): Kernel Module version matches driver.
[ 50.400] (II) fglrx(0): Kernel Module Build Time Information:
[ 50.400] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.39-2-amd64
[ 50.400] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 50.400] (II) fglrx(0): Build-Kernel __SMP__: no
[ 50.400] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 50.401] (II) fglrx(0): [uki] register handle = 0x00004000
[ 50.505] (II) fglrx(0): DRI initialization successfull
[ 50.505] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
[ 50.561] (==) fglrx(0): Backing store disabled
[ 50.561] (II) Loading extension FGLRXEXTENSION
[ 50.561] (**) fglrx(0): DPMS enabled
[ 50.562] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 50.562] (**) fglrx(0): Textured Video is enabled.
[ 50.562] (II) LoadModule: "glesx"
[ 50.562] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 51.024] (II) Module glesx: vendor="X.Org Foundation"
[ 51.024] compiled for 1.4.99.906, module version = 1.0.0
[ 51.024] (II) Loading extension GLESX
[ 51.024] (II) fglrx(0): GLESX enableFlags = 528
[ 51.025] (II) fglrx(0): GLESX is enabled
[ 51.025] (II) LoadModule: "amdxmm"
[ 51.025] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 51.344] (II) Module amdxmm: vendor="X.Org Foundation"
[ 51.344] compiled for 1.4.99.906, module version = 2.0.0
[ 51.344] (II) Loading extension AMDXVOPL
[ 51.344] (II) Loading extension AMDXVBA
[ 51.399] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 51.402] (II) fglrx(0): Enable composite support successfully
[ 51.425] (WW) fglrx(0): Option "VendorName" is not used
[ 51.425] (WW) fglrx(0): Option "ModelName" is not used
[ 51.425] (II) fglrx(0): X context handle = 0x1
[ 51.425] (II) fglrx(0): [DRI] installation complete
[ 51.425] (==) fglrx(0): Silken mouse enabled
[ 51.463] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 51.463] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 51.463] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 51.463] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 51.998] (--) RandR disabled
[ 51.998] (II) Initializing built-in extension Generic Event Extension
[ 51.998] (II) Initializing built-in extension SHAPE
[ 51.998] (II) Initializing built-in extension MIT-SHM
[ 51.998] (II) Initializing built-in extension XInputExtension
[ 51.998] (II) Initializing built-in extension XTEST
[ 51.998] (II) Initializing built-in extension BIG-REQUESTS
[ 51.998] (II) Initializing built-in extension SYNC
[ 51.998] (II) Initializing built-in extension XKEYBOARD
[ 51.998] (II) Initializing built-in extension XC-MISC
[ 51.998] (II) Initializing built-in extension SECURITY
[ 51.998] (II) Initializing built-in extension XINERAMA
[ 51.998] (II) Initializing built-in extension XFIXES
[ 51.998] (II) Initializing built-in extension RENDER
[ 51.998] (II) Initializing built-in extension RANDR
[ 51.998] (II) Initializing built-in extension COMPOSITE
[ 51.998] (II) Initializing built-in extension DAMAGE
[ 51.998] (II) SELinux: Disabled on system
[ 52.000] ukiDynamicMajor: found major device number 251
[ 52.000] ukiDynamicMajor: found major device number 251
[ 52.000] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 52.000] ukiOpenDevice: node name is /dev/ati/card0
[ 52.000] ukiOpenDevice: open result is 17, (OK)
[ 52.000] ukiOpenByBusid: ukiOpenMinor returns 17
[ 52.000] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 55.306] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 55.575] (II) fglrx(0): Enable the clock gating!
[ 55.575] (II) fglrx(0): Setting screen physical size to 381 x 238
[ 57.207] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 57.207] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 57.207] (II) LoadModule: "evdev"
[ 57.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.327] (II) Module evdev: vendor="X.Org Foundation"
[ 57.327] compiled for 1.10.1, module version = 2.6.0
[ 57.327] Module class: X.Org XInput Driver
[ 57.327] ABI class: X.Org XInput driver, version 12.2
[ 57.327] (II) Using input driver 'evdev' for 'Power Button'
[ 57.327] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.327] (**) Power Button: always reports core events
[ 57.327] (**) Power Button: Device: "/dev/input/event3"
[ 57.328] (--) Power Button: Found keys
[ 57.328] (II) Power Button: Configuring as keyboard
[ 57.328] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 57.328] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 57.328] (**) Option "xkb_rules" "evdev"
[ 57.328] (**) Option "xkb_model" "pc105"
[ 57.328] (**) Option "xkb_layout" "fr"
[ 57.328] (**) Option "xkb_variant" "latin9"
[ 57.328] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.543] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 57.543] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 57.543] (II) Using input driver 'evdev' for 'Video Bus'
[ 57.543] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.543] (**) Video Bus: always reports core events
[ 57.543] (**) Video Bus: Device: "/dev/input/event8"
[ 57.548] (--) Video Bus: Found keys
[ 57.548] (II) Video Bus: Configuring as keyboard
[ 57.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8/event8"
[ 57.548] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 57.548] (**) Option "xkb_rules" "evdev"
[ 57.548] (**) Option "xkb_model" "pc105"
[ 57.548] (**) Option "xkb_layout" "fr"
[ 57.548] (**) Option "xkb_variant" "latin9"
[ 57.548] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.552] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 57.552] (II) No input driver/identifier specified (ignoring)
[ 57.553] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 57.553] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 57.553] (II) Using input driver 'evdev' for 'Sleep Button'
[ 57.553] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.553] (**) Sleep Button: always reports core events
[ 57.553] (**) Sleep Button: Device: "/dev/input/event1"
[ 57.572] (--) Sleep Button: Found keys
[ 57.572] (II) Sleep Button: Configuring as keyboard
[ 57.572] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 57.572] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 57.572] (**) Option "xkb_rules" "evdev"
[ 57.572] (**) Option "xkb_model" "pc105"
[ 57.572] (**) Option "xkb_layout" "fr"
[ 57.572] (**) Option "xkb_variant" "latin9"
[ 57.572] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.575] (II) config/udev: Adding input device CKF7063 (/dev/input/event9)
[ 57.575] (**) CKF7063: Applying InputClass "evdev keyboard catchall"
[ 57.575] (II) Using input driver 'evdev' for 'CKF7063'
[ 57.575] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.575] (**) CKF7063: always reports core events
[ 57.575] (**) CKF7063: Device: "/dev/input/event9"
[ 57.584] (--) CKF7063: Found keys
[ 57.584] (II) CKF7063: Configuring as keyboard
[ 57.584] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input9/event9"
[ 57.584] (II) XINPUT: Adding extended input device "CKF7063" (type: KEYBOARD)
[ 57.584] (**) Option "xkb_rules" "evdev"
[ 57.584] (**) Option "xkb_model" "pc105"
[ 57.584] (**) Option "xkb_layout" "fr"
[ 57.584] (**) Option "xkb_variant" "latin9"
[ 57.584] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.584] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 57.584] (II) No input driver/identifier specified (ignoring)
[ 57.588] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event11)
[ 57.588] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 57.588] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 57.588] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.588] (**) USB Optical Mouse: always reports core events
[ 57.588] (**) USB Optical Mouse: Device: "/dev/input/event11"
[ 57.596] (--) USB Optical Mouse: Found 3 mouse buttons
[ 57.596] (--) USB Optical Mouse: Found scroll wheel(s)
[ 57.596] (--) USB Optical Mouse: Found relative axes
[ 57.596] (--) USB Optical Mouse: Found x and y relative axes
[ 57.596] (II) USB Optical Mouse: Configuring as mouse
[ 57.596] (II) USB Optical Mouse: Adding scrollwheel support
[ 57.596] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 57.596] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 57.596] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input11/event11"
[ 57.596] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
[ 57.596] (II) USB Optical Mouse: initialized for relative axes.
[ 57.596] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 57.596] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 57.596] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 57.596] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 57.596] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 57.596] (II) No input driver/identifier specified (ignoring)
[ 57.600] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 57.600] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 57.600] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 57.600] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.600] (**) AT Translated Set 2 keyboard: always reports core events
[ 57.600] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 57.600] (--) AT Translated Set 2 keyboard: Found keys
[ 57.600] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 57.600] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 57.600] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 57.600] (**) Option "xkb_rules" "evdev"
[ 57.600] (**) Option "xkb_model" "pc105"
[ 57.600] (**) Option "xkb_layout" "fr"
[ 57.600] (**) Option "xkb_variant" "latin9"
[ 57.600] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.601] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 57.601] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 57.601] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 57.601] (II) LoadModule: "synaptics"
[ 57.601] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 57.767] (II) Module synaptics: vendor="X.Org Foundation"
[ 57.767] compiled for 1.10.2, module version = 1.4.1
[ 57.767] Module class: X.Org XInput Driver
[ 57.767] ABI class: X.Org XInput driver, version 12.2
[ 57.767] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 57.767] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 57.767] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 57.767] (**) Option "Device" "/dev/input/event7"
[ 57.816] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 57.816] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 57.816] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 57.816] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 57.816] (--) SynPS/2 Synaptics TouchPad: buttons: left right
[ 57.832] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 57.832] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 57.856] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[ 57.856] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 57.856] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 57.856] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 57.856] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 57.856] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 57.856] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 57.856] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 57.856] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 57.872] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 57.872] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 57.872] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 57.872] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 57.872] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 57.872] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 57.872] (**) Option "Device" "/dev/input/mouse0"
[ 57.876] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range. defaulting to 1615 - 5685
[ 57.876] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range. defaulting to 1729 - 4171
[ 57.876] (--) SynPS/2 Synaptics TouchPad: invalid pressure range. defaulting to 0 - 256
[ 57.876] (--) SynPS/2 Synaptics TouchPad: invalid finger width range. defaulting to 0 - 16
[ 57.896] (EE) Query no Synaptics: 6003C8
[ 57.896] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 57.896] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 57.896] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[ 57.896] (II) UnloadModule: "synaptics"
[ 57.896] (II) Unloading synaptics
[ 57.896] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event4)
[ 57.896] (II) No input driver/identifier specified (ignoring)
[ 57.897] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 57.897] (II) No input driver/identifier specified (ignoring)
[ 57.897] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 57.897] (II) No input driver/identifier specified (ignoring)
[ 57.900] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[ 57.900] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 57.900] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 57.900] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 57.900] (**) HP WMI hotkeys: always reports core events
[ 57.900] (**) HP WMI hotkeys: Device: "/dev/input/event6"
[ 57.900] (--) HP WMI hotkeys: Found keys
[ 57.900] (II) HP WMI hotkeys: Configuring as keyboard
[ 57.900] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 57.900] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 57.900] (**) Option "xkb_rules" "evdev"
[ 57.900] (**) Option "xkb_model" "pc105"
[ 57.900] (**) Option "xkb_layout" "fr"
[ 57.900] (**) Option "xkb_variant" "latin9"
[ 57.900] (**) Option "xkb_options" "lv3:ralt_switch"
[ 57.918] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 131.912] Warning: LookupWindow()/SecurityLookupWindow() are deprecated. Please convert your driver/module to use dixLookupWindow().
[ 132.324] (II) fglrx(0): EDID vendor "LPL", prod id 41221
[ 132.324] (II) fglrx(0): Printing DDC gathered Modelines:
[ 132.324] (II) fglrx(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 173.625] (II) fglrx(0): EDID vendor "LPL", prod id 41221
[ 173.625] (II) fglrx(0): Printing DDC gathered Modelines:
[ 173.625] (II) fglrx(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
More information about the Pkg-fglrx-devel
mailing list