[Pkg-fglrx-devel] Bug#637686: fglrx-driver: Cursor stuck on right bottom corner and X freeze few seconds
Alexandre Singh
darthwound at live.com
Sat Aug 13 18:02:12 UTC 2011
Package: fglrx-driver
Version: 1:11-7-4
Severity: important
Since driver 11-5, when we move the cursor at right bottom corner, screen
freezes entirely during a few seconds.
A lot of my contacts have the same issue.
I have a Radeon HD5770.
I've seen this bug as a minor bug with KDE, but it is a major bug for every
environnement (I have Compiz, Openbox, Xfce, Awesome).
Please forgive me if my english is bad, and thanks your awesome work.
*---*
/-- Package-specific info:
VGA-compatible devices on PCI bus:
02:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon
HD 5700 Series]
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.684664] PCI-DMA: Disabling AGP.
[ 0.684743] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.936282] Linux agpgart interface v0.103
[ 6.551383] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 6.619714] [fglrx] Maximum main memory to use for locked dma
buffers: 3804 MBytes.
[ 6.619782] [fglrx] vendor: 1002 device: 68b8 count: 1
[ 6.620108] [fglrx] ioport: bar 4, base 0xe800, size: 0x100
[ 6.620390] [fglrx] Kernel PAT support is enabled
[ 6.620405] [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1
minors
[ 28.594784] fglrx_pci 0000:02:00.0: irq 43 for MSI/MSI-X
[ 28.595289] [fglrx] Firegl kernel thread PID: 2128
[ 28.595327] [fglrx] Firegl kernel thread PID: 2129
[ 28.595365] [fglrx] Firegl kernel thread PID: 2130
[ 28.595552] [fglrx] IRQ 43 Enabled
[ 28.806429] [fglrx] Gart USWC size:1240 M.
[ 28.806432] [fglrx] Gart cacheable size:491 M.
[ 28.806436] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 28.806438] [fglrx] Reserved FB block: Unshared offset:f91d000,
size:3e3000
[ 28.806440] [fglrx] Reserved FB block: Unshared offset:3fff4000,
size:c000
[22932.500052] [fglrx] IRQ 43 Disabled
[22936.162112] fglrx_pci 0000:02:00.0: irq 43 for MSI/MSI-X
[22936.162615] [fglrx] Firegl kernel thread PID: 30704
[22936.162692] [fglrx] Firegl kernel thread PID: 30705
[22936.162731] [fglrx] Firegl kernel thread PID: 30706
[22936.162939] [fglrx] IRQ 43 Enabled
[22936.299157] [fglrx] Gart USWC size:1240 M.
[22936.299160] [fglrx] Gart cacheable size:491 M.
[22936.299164] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[22936.299166] [fglrx] Reserved FB block: Unshared offset:f91d000,
size:3e3000
[22936.299168] [fglrx] Reserved FB block: Unshared offset:3fff4000,
size:c000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 684 Aug 1 19:04 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 46471 Aug 13 00:17 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 22935.853]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 22935.853] X Protocol Version 11, Revision 0
[ 22935.853] Build Operating System: Linux 3.0.0-rc6-amd64 x86_64 Debian
[ 22935.853] Current Operating System: Linux debian 3.0.0-1-amd64 #1 SMP
Sun Jul 24 02:24:44 UTC 2011 x86_64
[ 22935.853] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64
root=UUID=4091a010-df3f-468f-9e1e-f38809621b8f ro quiet
[ 22935.853] Build Date: 07 August 2011 06:45:11PM
[ 22935.853] xorg-server 2:1.10.3-1 (Cyril Brulebois <kibi at debian.org>)
[ 22935.853] Current version of pixman: 0.22.2
[ 22935.853] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22935.853] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22935.854] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 13
00:17:11 2011
[ 22935.854] (==) Using config file: "/etc/X11/xorg.conf"
[ 22935.854] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22935.854] (==) ServerLayout "aticonfig Layout"
[ 22935.854] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 22935.854] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 22935.854] (**) | |-->Device "aticonfig-Device[0]-0"
[ 22935.854] (==) Automatically adding devices
[ 22935.854] (==) Automatically enabling devices
[ 22935.854] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 22935.854] Entry deleted from font path.
[ 22935.854] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 22935.854] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22935.854] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 22935.854] (II) Loader magic: 0x7d7f20
[ 22935.854] (II) Module ABI versions:
[ 22935.854] X.Org ANSI C Emulation: 0.4
[ 22935.854] X.Org Video Driver: 10.0
[ 22935.854] X.Org XInput driver : 12.2
[ 22935.854] X.Org Server Extension : 5.0
[ 22935.855] (--) PCI:*(0:2:0:0) 1002:68b8:1002:2543 rev 0, Mem @
0xd0000000/268435456, 0xfbfc0000/131072, I/O @ 0x0000e800/256, BIOS @
0x????????/131072
[ 22935.855] (II) Open ACPI successful (/var/run/acpid.socket)
[ 22935.855] (II) "extmod" will be loaded by default.
[ 22935.855] (II) "dbe" will be loaded by default.
[ 22935.855] (II) "glx" will be loaded by default.
[ 22935.855] (II) "record" will be loaded by default.
[ 22935.855] (II) "dri" will be loaded by default.
[ 22935.855] (II) "dri2" will be loaded by default.
[ 22935.855] (II) LoadModule: "extmod"
[ 22935.855] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22935.856] (II) Module extmod: vendor="X.Org Foundation"
[ 22935.856] compiled for 1.10.3, module version = 1.0.0
[ 22935.856] Module class: X.Org Server Extension
[ 22935.856] ABI class: X.Org Server Extension, version 5.0
[ 22935.856] (II) Loading extension SELinux
[ 22935.856] (II) Loading extension MIT-SCREEN-SAVER
[ 22935.856] (II) Loading extension XFree86-VidModeExtension
[ 22935.856] (II) Loading extension XFree86-DGA
[ 22935.856] (II) Loading extension DPMS
[ 22935.856] (II) Loading extension XVideo
[ 22935.856] (II) Loading extension XVideo-MotionCompensation
[ 22935.856] (II) Loading extension X-Resource
[ 22935.856] (II) LoadModule: "dbe"
[ 22935.856] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22935.856] (II) Module dbe: vendor="X.Org Foundation"
[ 22935.856] compiled for 1.10.3, module version = 1.0.0
[ 22935.856] Module class: X.Org Server Extension
[ 22935.856] ABI class: X.Org Server Extension, version 5.0
[ 22935.856] (II) Loading extension DOUBLE-BUFFER
[ 22935.856] (II) LoadModule: "glx"
[ 22935.856] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22935.856] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 22935.856] compiled for 6.9.0, module version = 1.0.0
[ 22935.856] (II) Loading extension GLX
[ 22935.856] (II) LoadModule: "record"
[ 22935.856] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22935.856] (II) Module record: vendor="X.Org Foundation"
[ 22935.856] compiled for 1.10.3, module version = 1.13.0
[ 22935.856] Module class: X.Org Server Extension
[ 22935.856] ABI class: X.Org Server Extension, version 5.0
[ 22935.856] (II) Loading extension RECORD
[ 22935.857] (II) LoadModule: "dri"
[ 22935.857] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22935.857] (II) Module dri: vendor="X.Org Foundation"
[ 22935.857] compiled for 1.10.3, module version = 1.0.0
[ 22935.857] ABI class: X.Org Server Extension, version 5.0
[ 22935.857] (II) Loading extension XFree86-DRI
[ 22935.857] (II) LoadModule: "dri2"
[ 22935.857] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22935.857] (II) Module dri2: vendor="X.Org Foundation"
[ 22935.857] compiled for 1.10.3, module version = 1.2.0
[ 22935.857] ABI class: X.Org Server Extension, version 5.0
[ 22935.857] (II) Loading extension DRI2
[ 22935.857] (II) LoadModule: "fglrx"
[ 22935.857] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 22935.871] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 22935.871] compiled for 1.4.99.906, module version = 8.87.5
[ 22935.871] Module class: X.Org Video Driver
[ 22935.871] (II) Loading sub module "fglrxdrm"
[ 22935.871] (II) LoadModule: "fglrxdrm"
[ 22935.871] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22935.872] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 22935.872] compiled for 1.4.99.906, module version = 8.87.5
[ 22935.872] (II) ATI Proprietary Linux Driver Version Identifier:8.87.5
[ 22935.872] (II) ATI Proprietary Linux Driver Release Identifier: 8.872
[ 22935.872] (II) ATI Proprietary Linux Driver Build Date: Jul 7 2011
22:42:39
[ 22935.872] (--) using VT number 7
[ 22935.875] (WW) Falling back to old probe method for fglrx
[ 22935.881] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 22935.881] (--) Chipset Supported AMD Graphics Processor (0x68B8) found
[ 22935.881] (WW) fglrx: No matching Device section for instance (BusID
PCI:0 at 2:0:1) found
[ 22935.882] (II) AMD Video driver is running on a device belonging to a
group targeted for this release
[ 22935.882] (II) AMD Video driver is signed
[ 22935.882] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 22935.882] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22935.882] (II) fglrx(0): pEnt->device->identifier=0x1fa0680
[ 22935.882] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 22935.882] (II) Loading sub module "vgahw"
[ 22935.882] (II) LoadModule: "vgahw"
[ 22935.882] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 22935.882] (II) Module vgahw: vendor="X.Org Foundation"
[ 22935.882] compiled for 1.10.3, module version = 0.1.0
[ 22935.882] ABI class: X.Org Video Driver, version 10.0
[ 22935.882] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 22935.882] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32
bpp pixmaps)
[ 22935.882] (==) fglrx(0): Default visual is TrueColor
[ 22935.882] (**) fglrx(0): Option "DPMS" "true"
[ 22935.882] (==) fglrx(0): RGB weight 888
[ 22935.882] (II) fglrx(0): Using 8 bits per RGB
[ 22935.882] (==) fglrx(0): Buffer Tiling is ON
[ 22935.883] (II) Loading sub module "fglrxdrm"
[ 22935.883] (II) LoadModule: "fglrxdrm"
[ 22935.883] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22935.883] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 22935.883] compiled for 1.4.99.906, module version = 8.87.5
[ 22935.884] ukiDynamicMajor: found major device number 251
[ 22935.884] ukiDynamicMajor: found major device number 251
[ 22935.884] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 22935.884] ukiOpenDevice: node name is /dev/ati/card0
[ 22935.884] ukiOpenDevice: open result is 11, (OK)
[ 22935.884] ukiOpenByBusid: ukiOpenMinor returns 11
[ 22935.884] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 22935.884] (==) fglrx(0): NoAccel = NO
[ 22935.884] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 22935.884] (--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series"
(Chipset = 0x68b8)
[ 22935.884] (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x2543)
[ 22935.884] (==) fglrx(0): board vendor info: original ATI graphics adapter
[ 22935.884] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 22935.884] (--) fglrx(0): MMIO registers at 0xfbfc0000
[ 22935.884] (--) fglrx(0): I/O port at 0x0000e800
[ 22935.884] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 22935.885] (II) fglrx(0): AC Adapter is used
[ 22935.895] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 22935.969] (II) Loading sub module "vbe"
[ 22935.969] (II) LoadModule: "vbe"
[ 22935.969] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 22935.969] (II) Module vbe: vendor="X.Org Foundation"
[ 22935.969] compiled for 1.10.3, module version = 1.1.0
[ 22935.969] ABI class: X.Org Video Driver, version 10.0
[ 22935.969] (II) fglrx(0): VESA BIOS detected
[ 22935.969] (II) fglrx(0): VESA VBE Version 3.0
[ 22935.969] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 22935.969] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 22935.969] (II) fglrx(0): VESA VBE OEM Software Rev: 12.12
[ 22935.969] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI
Technologies Inc.
[ 22935.969] (II) fglrx(0): VESA VBE OEM Product: JUNIPER
[ 22935.969] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 22935.995] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 22935.995] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 22935.995] (II) fglrx(0): PCIE card detected
[ 22935.995] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 22935.995] (II) fglrx(0): board/chipset is supported by this driver
(original ATI board)
[ 22935.998] (II) fglrx(0): Using adapter: 2:0.0.
[ 22936.128] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000,
MCFBSize = 0x40000000)
[ 22936.162] (II) fglrx(0): Interrupt handler installed at IRQ 43.
[ 22936.163] (II) fglrx(0): RandR 1.2 support is enabled!
[ 22936.163] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 22936.163] (==) fglrx(0): Center Mode is disabled
[ 22936.163] (II) Loading sub module "fb"
[ 22936.163] (II) LoadModule: "fb"
[ 22936.163] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 22936.163] (II) Module fb: vendor="X.Org Foundation"
[ 22936.163] compiled for 1.10.3, module version = 1.0.0
[ 22936.163] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22936.163] (II) Loading sub module "ddc"
[ 22936.163] (II) LoadModule: "ddc"
[ 22936.163] (II) Module "ddc" already built-in
[ 22936.288] (II) fglrx(0): Finished Initialize PPLIB!
[ 22936.288] (II) fglrx(0): Output DFP1 using monitor section
aticonfig-Monitor[0]-0
[ 22936.288] (II) fglrx(0): Output DFP2 has no monitor section
[ 22936.288] (II) fglrx(0): Output DFP3 has no monitor section
[ 22936.288] (II) fglrx(0): Output DFP4 has no monitor section
[ 22936.288] (II) fglrx(0): Output CRT1 has no monitor section
[ 22936.288] (II) fglrx(0): Output CRT2 has no monitor section
[ 22936.288] (II) Loading sub module "ddc"
[ 22936.288] (II) LoadModule: "ddc"
[ 22936.288] (II) Module "ddc" already built-in
[ 22936.288] (II) fglrx(0): Connected Display0: DFP4
[ 22936.288] (II) fglrx(0): Display0 EDID data ---------------------------
[ 22936.288] (II) fglrx(0): Manufacturer: SAM Model: 5fb Serial#:
1162228275
[ 22936.288] (II) fglrx(0): Year: 2010 Week: 3
[ 22936.288] (II) fglrx(0): EDID Version: 1.3
[ 22936.288] (II) fglrx(0): Digital Display Input
[ 22936.288] (II) fglrx(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 22936.288] (II) fglrx(0): Gamma: 2.20
[ 22936.288] (II) fglrx(0): DPMS capabilities: Off
[ 22936.288] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[ 22936.288] (II) fglrx(0): First detailed timing is preferred mode
[ 22936.288] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300
greenY: 0.600
[ 22936.288] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312
whiteY: 0.329
[ 22936.288] (II) fglrx(0): Supported established timings:
[ 22936.288] (II) fglrx(0): 640x480 at 60Hz
[ 22936.288] (II) fglrx(0): 800x600 at 56Hz
[ 22936.288] (II) fglrx(0): 800x600 at 60Hz
[ 22936.288] (II) fglrx(0): 1024x768 at 60Hz
[ 22936.288] (II) fglrx(0): Manufacturer's mask: 0
[ 22936.288] (II) fglrx(0): Supported standard timings:
[ 22936.288] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60
vid: 129
[ 22936.288] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60
vid: 16513
[ 22936.288] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60
vid: 32897
[ 22936.288] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60
vid: 149
[ 22936.288] (II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60
vid: 16553
[ 22936.288] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60
vid: 179
[ 22936.288] (II) fglrx(0): Supported detailed timing:
[ 22936.288] (II) fglrx(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 22936.288] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end
2052 h_blank_end 2200 h_border: 0
[ 22936.288] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end
1089 v_blanking: 1125 v_border: 0
[ 22936.288] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H
max: 81 kHz, PixClock max 175 MHz
[ 22936.288] (II) fglrx(0): Monitor name: SyncMaster
[ 22936.288] (II) fglrx(0): Serial No: H9MZ107086
[ 22936.288] (II) fglrx(0): EDID (in hex):
[ 22936.288] (II) fglrx(0): 00ffffffffffff004c2dfb0533324645
[ 22936.288] (II) fglrx(0): 0314010380331d782aee91a3544c9926
[ 22936.288] (II) fglrx(0): 0f50542308008100814081809500a940
[ 22936.288] (II) fglrx(0): b30001010101023a801871382d40582c
[ 22936.288] (II) fglrx(0): 4500fe1f1100001e000000fd00383c1e
[ 22936.288] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 22936.288] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 22936.288] (II) fglrx(0): 0048394d5a3130373038360a20200089
[ 22936.288] (II) fglrx(0): End of Display0 EDID data --------------------
[ 22936.297] (II) fglrx(0): EDID for output DFP1
[ 22936.297] (II) fglrx(0): EDID for output DFP2
[ 22936.297] (II) fglrx(0): EDID for output DFP3
[ 22936.297] (II) fglrx(0): EDID for output DFP4
[ 22936.297] (II) fglrx(0): Manufacturer: SAM Model: 5fb Serial#:
1162228275
[ 22936.297] (II) fglrx(0): Year: 2010 Week: 3
[ 22936.297] (II) fglrx(0): EDID Version: 1.3
[ 22936.297] (II) fglrx(0): Digital Display Input
[ 22936.297] (II) fglrx(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 22936.298] (II) fglrx(0): Gamma: 2.20
[ 22936.298] (II) fglrx(0): DPMS capabilities: Off
[ 22936.298] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[ 22936.298] (II) fglrx(0): First detailed timing is preferred mode
[ 22936.298] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300
greenY: 0.600
[ 22936.298] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312
whiteY: 0.329
[ 22936.298] (II) fglrx(0): Supported established timings:
[ 22936.298] (II) fglrx(0): 640x480 at 60Hz
[ 22936.298] (II) fglrx(0): 800x600 at 56Hz
[ 22936.298] (II) fglrx(0): 800x600 at 60Hz
[ 22936.298] (II) fglrx(0): 1024x768 at 60Hz
[ 22936.298] (II) fglrx(0): Manufacturer's mask: 0
[ 22936.298] (II) fglrx(0): Supported standard timings:
[ 22936.298] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60
vid: 129
[ 22936.298] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60
vid: 16513
[ 22936.298] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60
vid: 32897
[ 22936.298] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60
vid: 149
[ 22936.298] (II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60
vid: 16553
[ 22936.298] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60
vid: 179
[ 22936.298] (II) fglrx(0): Supported detailed timing:
[ 22936.298] (II) fglrx(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 22936.298] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end
2052 h_blank_end 2200 h_border: 0
[ 22936.298] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end
1089 v_blanking: 1125 v_border: 0
[ 22936.298] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H
max: 81 kHz, PixClock max 175 MHz
[ 22936.298] (II) fglrx(0): Monitor name: SyncMaster
[ 22936.298] (II) fglrx(0): Serial No: H9MZ107086
[ 22936.298] (II) fglrx(0): EDID (in hex):
[ 22936.298] (II) fglrx(0): 00ffffffffffff004c2dfb0533324645
[ 22936.298] (II) fglrx(0): 0314010380331d782aee91a3544c9926
[ 22936.298] (II) fglrx(0): 0f50542308008100814081809500a940
[ 22936.298] (II) fglrx(0): b30001010101023a801871382d40582c
[ 22936.298] (II) fglrx(0): 4500fe1f1100001e000000fd00383c1e
[ 22936.298] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 22936.298] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 22936.298] (II) fglrx(0): 0048394d5a3130373038360a20200089
[ 22936.298] (II) fglrx(0): Printing probed modes for output DFP4
[ 22936.298] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008
2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664
1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728
1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1400x1050"x60.0 162.00 1400 1664
1856 2160 1050 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1600x900"x60.0 162.00 1600 1664
1856 2160 900 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1360x1024"x60.0 162.00 1360 1664
1856 2160 1024 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1440x900"x60.0 88.75 1440 1488
1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376
1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1280x800"x60.0 71.00 1280 1328
1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1280x768"x60.0 71.00 1280 1328
1360 1440 768 803 809 823 +hsync -vsync (49.3 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1280x720"x60.0 71.00 1280 1328
1360 1440 720 803 809 823 +hsync -vsync (49.3 kHz)
[ 22936.298] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 22936.298] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 22936.298] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 22936.298] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 22936.298] (II) fglrx(0): EDID for output CRT1
[ 22936.298] (II) fglrx(0): EDID for output CRT2
[ 22936.298] (II) fglrx(0): Output DFP1 disconnected
[ 22936.298] (II) fglrx(0): Output DFP2 disconnected
[ 22936.298] (II) fglrx(0): Output DFP3 disconnected
[ 22936.298] (II) fglrx(0): Output DFP4 connected
[ 22936.298] (II) fglrx(0): Output CRT1 disconnected
[ 22936.298] (II) fglrx(0): Output CRT2 disconnected
[ 22936.298] (II) fglrx(0): Using exact sizes for initial modes
[ 22936.298] (II) fglrx(0): Output DFP4 using initial mode 1920x1080
[ 22936.298] (II) fglrx(0): DPI set to (96, 96)
[ 22936.298] (II) fglrx(0): Eyefinity capable adapter detected.
[ 22936.298] (II) fglrx(0): Adapter ATI Radeon HD 5700 Series has 3
configurable heads and 1 displays connected.
[ 22936.298] (==) fglrx(0): PseudoColor visuals disabled
[ 22936.298] (II) Loading sub module "ramdac"
[ 22936.298] (II) LoadModule: "ramdac"
[ 22936.298] (II) Module "ramdac" already built-in
[ 22936.298] (==) fglrx(0): NoDRI = NO
[ 22936.298] (==) fglrx(0): Capabilities: 0x00000000
[ 22936.298] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 22936.298] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 22936.298] (==) fglrx(0): UseFastTLS=0
[ 22936.298] (==) fglrx(0): BlockSignalsOnLock=1
[ 22936.298] (II) fglrx(0): Desktop Vsync is enabled.
[ 22936.298] (--) Depth 24 pixmap format is 32 bpp
[ 22936.298] (II) Loading extension ATIFGLRXDRI
[ 22936.298] (II) fglrx(0): doing swlDriScreenInit
[ 22936.298] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 22936.298] ukiDynamicMajor: found major device number 251
[ 22936.298] ukiDynamicMajor: found major device number 251
[ 22936.298] ukiDynamicMajor: found major device number 251
[ 22936.298] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 22936.298] ukiOpenDevice: node name is /dev/ati/card0
[ 22936.298] ukiOpenDevice: open result is 16, (OK)
[ 22936.298] ukiOpenByBusid: ukiOpenMinor returns 16
[ 22936.298] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 22936.298] (II) fglrx(0): [uki] DRM interface version 1.0
[ 22936.298] (II) fglrx(0): [uki] created "fglrx" driver at busid
"PCI:2:0:0"
[ 22936.298] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x4c1e000
[ 22936.298] (II) fglrx(0): [uki] mapped SAREA 0x4c1e000 to 0x7f604ff51000
[ 22936.298] (II) fglrx(0): [uki] framebuffer handle = 0x4c1f000
[ 22936.299] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 22936.299] (II) fglrx(0): swlDriScreenInit done
[ 22936.299] (II) fglrx(0): Kernel Module Version Information:
[ 22936.299] (II) fglrx(0): Name: fglrx
[ 22936.299] (II) fglrx(0): Version: 8.87.5
[ 22936.299] (II) fglrx(0): Date: Jul 7 2011
[ 22936.299] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 22936.299] (II) fglrx(0): Kernel Module version matches driver.
[ 22936.299] (II) fglrx(0): Kernel Module Build Time Information:
[ 22936.299] (II) fglrx(0): Build-Kernel UTS_RELEASE:
3.0.0-1-amd64
[ 22936.299] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 22936.299] (II) fglrx(0): Build-Kernel __SMP__: no
[ 22936.299] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 22936.299] (II) fglrx(0): [uki] register handle = 0x04c20000
[ 22936.312] (II) fglrx(0): DRI initialization successfull
[ 22936.312] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010e0000
[ 22936.313] (==) fglrx(0): Backing store disabled
[ 22936.313] (II) Loading extension FGLRXEXTENSION
[ 22936.313] (**) fglrx(0): DPMS enabled
[ 22936.313] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 22936.313] (**) fglrx(0): Textured Video is enabled.
[ 22936.313] (II) LoadModule: "glesx"
[ 22936.313] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 22936.314] (II) Module glesx: vendor="X.Org Foundation"
[ 22936.314] compiled for 1.4.99.906, module version = 1.0.0
[ 22936.314] (II) Loading extension GLESX
[ 22936.314] (II) fglrx(0): GLESX enableFlags = 592
[ 22936.314] (II) fglrx(0): GLESX is enabled
[ 22936.314] (II) LoadModule: "amdxmm"
[ 22936.314] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 22936.314] (II) Module amdxmm: vendor="X.Org Foundation"
[ 22936.314] compiled for 1.4.99.906, module version = 2.0.0
[ 22936.376] (II) Loading extension AMDXVOPL
[ 22936.376] (II) Loading extension AMDXVBA
[ 22936.376] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 22936.378] (II) fglrx(0): Enable composite support successfully
[ 22936.378] (WW) fglrx(0): Option "VendorName" is not used
[ 22936.378] (WW) fglrx(0): Option "ModelName" is not used
[ 22936.378] (II) fglrx(0): X context handle = 0x1
[ 22936.378] (II) fglrx(0): [DRI] installation complete
[ 22936.378] (==) fglrx(0): Silken mouse enabled
[ 22936.378] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 22936.378] (II) fglrx(0): Disabling in-server RandR and enabling
in-driver RandR 1.2.
[ 22936.440] (--) RandR disabled
[ 22936.440] (II) Initializing built-in extension Generic Event Extension
[ 22936.440] (II) Initializing built-in extension SHAPE
[ 22936.440] (II) Initializing built-in extension MIT-SHM
[ 22936.440] (II) Initializing built-in extension XInputExtension
[ 22936.440] (II) Initializing built-in extension XTEST
[ 22936.440] (II) Initializing built-in extension BIG-REQUESTS
[ 22936.440] (II) Initializing built-in extension SYNC
[ 22936.440] (II) Initializing built-in extension XKEYBOARD
[ 22936.440] (II) Initializing built-in extension XC-MISC
[ 22936.440] (II) Initializing built-in extension SECURITY
[ 22936.440] (II) Initializing built-in extension XINERAMA
[ 22936.440] (II) Initializing built-in extension XFIXES
[ 22936.440] (II) Initializing built-in extension RENDER
[ 22936.440] (II) Initializing built-in extension RANDR
[ 22936.440] (II) Initializing built-in extension COMPOSITE
[ 22936.440] (II) Initializing built-in extension DAMAGE
[ 22936.440] (II) SELinux: Disabled on system
[ 22936.442] ukiDynamicMajor: found major device number 251
[ 22936.442] ukiDynamicMajor: found major device number 251
[ 22936.442] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 22936.442] ukiOpenDevice: node name is /dev/ati/card0
[ 22936.442] ukiOpenDevice: open result is 17, (OK)
[ 22936.442] ukiOpenByBusid: ukiOpenMinor returns 17
[ 22936.442] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 22936.518] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX:
Initialized DRI GL provider for screen 0
[ 22936.529] (II) fglrx(0): Enable the clock gating!
[ 22936.540] (II) fglrx(0): Desktop Vsync is enabled.
[ 22936.540] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 22936.583] (II) config/udev: Adding input device Power Button
(/dev/input/event5)
[ 22936.583] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 22936.583] (II) LoadModule: "evdev"
[ 22936.583] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22936.583] (II) Module evdev: vendor="X.Org Foundation"
[ 22936.583] compiled for 1.10.1, module version = 2.6.0
[ 22936.583] Module class: X.Org XInput Driver
[ 22936.583] ABI class: X.Org XInput driver, version 12.2
[ 22936.583] (II) Using input driver 'evdev' for 'Power Button'
[ 22936.583] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22936.583] (**) Power Button: always reports core events
[ 22936.583] (**) Power Button: Device: "/dev/input/event5"
[ 22936.583] (--) Power Button: Found keys
[ 22936.583] (II) Power Button: Configuring as keyboard
[ 22936.583] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 22936.583] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD)
[ 22936.583] (**) Option "xkb_rules" "evdev"
[ 22936.583] (**) Option "xkb_model" "pc105"
[ 22936.583] (**) Option "xkb_layout" "fr"
[ 22936.583] (**) Option "xkb_variant" "latin9"
[ 22936.608] (II) config/udev: Adding input device Power Button
(/dev/input/event4)
[ 22936.608] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 22936.608] (II) Using input driver 'evdev' for 'Power Button'
[ 22936.608] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22936.608] (**) Power Button: always reports core events
[ 22936.608] (**) Power Button: Device: "/dev/input/event4"
[ 22936.608] (--) Power Button: Found keys
[ 22936.608] (II) Power Button: Configuring as keyboard
[ 22936.608] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 22936.608] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD)
[ 22936.608] (**) Option "xkb_rules" "evdev"
[ 22936.608] (**) Option "xkb_model" "pc105"
[ 22936.608] (**) Option "xkb_layout" "fr"
[ 22936.608] (**) Option "xkb_variant" "latin9"
[ 22936.611] (II) config/udev: Adding input device G15 Gaming Keyboard
(/dev/input/event0)
[ 22936.611] (**) G15 Gaming Keyboard: Applying InputClass "evdev
keyboard catchall"
[ 22936.611] (II) Using input driver 'evdev' for 'G15 Gaming Keyboard'
[ 22936.611] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22936.611] (**) G15 Gaming Keyboard: always reports core events
[ 22936.611] (**) G15 Gaming Keyboard: Device: "/dev/input/event0"
[ 22936.611] (--) G15 Gaming Keyboard: Found keys
[ 22936.611] (II) G15 Gaming Keyboard: Configuring as keyboard
[ 22936.611] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input0/event0"
[ 22936.611] (II) XINPUT: Adding extended input device "G15 Gaming
Keyboard" (type: KEYBOARD)
[ 22936.611] (**) Option "xkb_rules" "evdev"
[ 22936.611] (**) Option "xkb_model" "pc105"
[ 22936.611] (**) Option "xkb_layout" "fr"
[ 22936.611] (**) Option "xkb_variant" "latin9"
[ 22936.611] (II) config/udev: Adding input device G15 Gaming Keyboard
(/dev/input/event1)
[ 22936.611] (**) G15 Gaming Keyboard: Applying InputClass "evdev
keyboard catchall"
[ 22936.611] (II) Using input driver 'evdev' for 'G15 Gaming Keyboard'
[ 22936.611] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22936.611] (**) G15 Gaming Keyboard: always reports core events
[ 22936.611] (**) G15 Gaming Keyboard: Device: "/dev/input/event1"
[ 22936.611] (--) G15 Gaming Keyboard: Found keys
[ 22936.611] (II) G15 Gaming Keyboard: Configuring as keyboard
[ 22936.611] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input1/event1"
[ 22936.611] (II) XINPUT: Adding extended input device "G15 Gaming
Keyboard" (type: KEYBOARD)
[ 22936.611] (**) Option "xkb_rules" "evdev"
[ 22936.611] (**) Option "xkb_model" "pc105"
[ 22936.611] (**) Option "xkb_layout" "fr"
[ 22936.611] (**) Option "xkb_variant" "latin9"
[ 22936.612] (II) config/udev: Adding input device Wacom Bamboo Pen Pen
(/dev/input/event6)
[ 22936.612] (**) Wacom Bamboo Pen Pen: Applying InputClass "evdev
tablet catchall"
[ 22936.612] (**) Wacom Bamboo Pen Pen: Applying InputClass "Wacom class"
[ 22936.612] (II) LoadModule: "wacom"
[ 22936.612] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 22936.612] (II) Module wacom: vendor="X.Org Foundation"
[ 22936.612] compiled for 1.10.1, module version = 0.10.10
[ 22936.612] Module class: X.Org XInput Driver
[ 22936.612] ABI class: X.Org XInput driver, version 12.2
[ 22936.612] (II) Using input driver 'wacom' for 'Wacom Bamboo Pen Pen'
[ 22936.612] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 22936.612] (**) Wacom Bamboo Pen Pen: always reports core events
[ 22936.612] (**) Option "Device" "/dev/input/event6"
[ 22936.612] (II) Wacom Bamboo Pen Pen: type not specified, assuming
'stylus'.
[ 22936.612] (II) Wacom Bamboo Pen Pen: other types will be
automatically added.
[ 22936.612] (--) Wacom Bamboo Pen Pen stylus: using pressure threshold
of 27 for button 1
[ 22936.612] (--) Wacom Bamboo Pen Pen stylus: Wacom USB Bamboo tablet
maxX=14720 maxY=9200 maxZ=255 resX=100000 resY=100000 tilt=disabled
[ 22936.612] (II) Wacom Bamboo Pen Pen stylus: hotplugging dependent
devices.
[ 22936.612] (**) Wacom Bamboo Pen Pen eraser: Applying InputClass
"evdev tablet catchall"
[ 22936.612] (**) Wacom Bamboo Pen Pen eraser: Applying InputClass
"Wacom class"
[ 22936.612] (II) Using input driver 'wacom' for 'Wacom Bamboo Pen Pen
eraser'
[ 22936.612] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 22936.612] (**) Wacom Bamboo Pen Pen eraser: always reports core events
[ 22936.612] (**) Option "Device" "/dev/input/event6"
[ 22936.612] (--) Wacom Bamboo Pen Pen eraser: Wacom USB Bamboo tablet
maxX=14720 maxY=9200 maxZ=255 resX=100000 resY=100000 tilt=disabled
[ 22936.700] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input6/event6"
[ 22936.700] (II) XINPUT: Adding extended input device "Wacom Bamboo Pen
Pen eraser" (type: ERASER)
[ 22936.700] (--) Wacom Bamboo Pen Pen eraser: top X=0 top Y=0 bottom
X=14720 bottom Y=9200 resol X=100000 resol Y=100000
[ 22936.700] (**) Wacom Bamboo Pen Pen eraser: (accel) keeping
acceleration scheme 1
[ 22936.700] (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration
profile 0
[ 22936.700] (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration
factor: 2.000
[ 22936.700] (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration
threshold: 4
[ 22936.700] (II) Wacom Bamboo Pen Pen stylus: hotplugging completed.
[ 22936.728] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input6/event6"
[ 22936.728] (II) XINPUT: Adding extended input device "Wacom Bamboo Pen
Pen stylus" (type: STYLUS)
[ 22936.728] (--) Wacom Bamboo Pen Pen stylus: top X=0 top Y=0 bottom
X=14720 bottom Y=9200 resol X=100000 resol Y=100000
[ 22936.728] (**) Wacom Bamboo Pen Pen stylus: (accel) keeping
acceleration scheme 1
[ 22936.728] (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration
profile 0
[ 22936.728] (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration
factor: 2.000
[ 22936.728] (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration
threshold: 4
[ 22936.728] (II) config/udev: Adding input device Wacom Bamboo Pen Pen
(/dev/input/mouse1)
[ 22936.728] (II) No input driver/identifier specified (ignoring)
[ 22936.728] (II) config/udev: Adding input device Wacom Bamboo Pen
Finger (/dev/input/event7)
[ 22936.728] (**) Wacom Bamboo Pen Finger: Applying InputClass "evdev
touchpad catchall"
[ 22936.728] (**) Wacom Bamboo Pen Finger: Applying InputClass "touchpad
catchall"
[ 22936.728] (**) Wacom Bamboo Pen Finger: Applying InputClass "Wacom class"
[ 22936.728] (II) Using input driver 'wacom' for 'Wacom Bamboo Pen Finger'
[ 22936.728] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 22936.728] (**) Wacom Bamboo Pen Finger: always reports core events
[ 22936.728] (**) Option "Device" "/dev/input/event7"
[ 22936.729] (II) Wacom Bamboo Pen Finger: type not specified, assuming
'touch'.
[ 22936.729] (II) Wacom Bamboo Pen Finger: other types will be
automatically added.
[ 22936.729] (--) Wacom Bamboo Pen Finger touch: using pressure
threshold of 27 for button 1
[ 22936.729] (--) Wacom Bamboo Pen Finger touch: Wacom USB Bamboo tablet
maxX=15360 maxY=10240 resX=-2147483648 resY=-2147483648
[ 22936.729] (II) Wacom Bamboo Pen Finger touch: hotplugging dependent
devices.
[ 22936.729] (**) Wacom Bamboo Pen Finger pad: Applying InputClass
"evdev touchpad catchall"
[ 22936.729] (**) Wacom Bamboo Pen Finger pad: Applying InputClass
"touchpad catchall"
[ 22936.729] (**) Wacom Bamboo Pen Finger pad: Applying InputClass
"Wacom class"
[ 22936.729] (II) Using input driver 'wacom' for 'Wacom Bamboo Pen
Finger pad'
[ 22936.729] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 22936.729] (**) Wacom Bamboo Pen Finger pad: always reports core events
[ 22936.729] (**) Option "Device" "/dev/input/event7"
[ 22936.729] (--) Wacom Bamboo Pen Finger pad: Wacom USB Bamboo tablet
maxX=15360 maxY=10240 resX=-2147483648 resY=-2147483648
[ 22936.748] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.2/3-1.2:1.1/input/input7/event7"
[ 22936.748] (II) XINPUT: Adding extended input device "Wacom Bamboo Pen
Finger pad" (type: PAD)
[ 22936.748] (**) Wacom Bamboo Pen Finger pad: (accel) keeping
acceleration scheme 1
[ 22936.748] (**) Wacom Bamboo Pen Finger pad: (accel) acceleration
profile 0
[ 22936.748] (**) Wacom Bamboo Pen Finger pad: (accel) acceleration
factor: 2.000
[ 22936.748] (**) Wacom Bamboo Pen Finger pad: (accel) acceleration
threshold: 4
[ 22936.748] (II) Wacom Bamboo Pen Finger touch: hotplugging completed.
[ 22936.764] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.2/3-1.2:1.1/input/input7/event7"
[ 22936.764] (II) XINPUT: Adding extended input device "Wacom Bamboo Pen
Finger touch" (type: TOUCH)
[ 22936.764] (--) Wacom Bamboo Pen Finger touch: top X=0 top Y=0 bottom
X=15360 bottom Y=10240 resol X=-2147483648 resol Y=-2147483648
[ 22936.764] (**) Wacom Bamboo Pen Finger touch: (accel) keeping
acceleration scheme 1
[ 22936.764] (**) Wacom Bamboo Pen Finger touch: (accel) acceleration
profile 0
[ 22936.764] (**) Wacom Bamboo Pen Finger touch: (accel) acceleration
factor: 2.000
[ 22936.764] (**) Wacom Bamboo Pen Finger touch: (accel) acceleration
threshold: 4
[ 22936.764] (II) config/udev: Adding input device Wacom Bamboo Pen
Finger (/dev/input/mouse2)
[ 22936.764] (**) Wacom Bamboo Pen Finger: Applying InputClass "touchpad
catchall"
[ 22936.764] (II) LoadModule: "synaptics"
[ 22936.764] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 22936.764] (II) Module synaptics: vendor="X.Org Foundation"
[ 22936.764] compiled for 1.10.2, module version = 1.4.1
[ 22936.764] Module class: X.Org XInput Driver
[ 22936.764] ABI class: X.Org XInput driver, version 12.2
[ 22936.764] (II) Using input driver 'synaptics' for 'Wacom Bamboo Pen
Finger'
[ 22936.764] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 22936.764] (**) Wacom Bamboo Pen Finger: always reports core events
[ 22936.764] (**) Option "Device" "/dev/input/mouse2"
[ 22936.764] (--) Wacom Bamboo Pen Finger: invalid x-axis range.
defaulting to 1615 - 5685
[ 22936.764] (--) Wacom Bamboo Pen Finger: invalid y-axis range.
defaulting to 1729 - 4171
[ 22936.764] (--) Wacom Bamboo Pen Finger: invalid pressure range.
defaulting to 0 - 256
[ 22936.764] (--) Wacom Bamboo Pen Finger: invalid finger width range.
defaulting to 0 - 16
[ 22936.784] (EE) Query no Synaptics: 6003C8
[ 22936.784] (--) Wacom Bamboo Pen Finger: no supported touchpad found
[ 22936.784] (EE) Wacom Bamboo Pen Finger Unable to query/initialize
Synaptics hardware.
[ 22936.800] (EE) PreInit returned 11 for "Wacom Bamboo Pen Finger"
[ 22936.800] (II) UnloadModule: "synaptics"
[ 22936.800] (II) Unloading synaptics
[ 22936.800] (II) config/udev: Adding input device Logitech USB Gaming
Mouse (/dev/input/event2)
[ 22936.800] (**) Logitech USB Gaming Mouse: Applying InputClass "evdev
pointer catchall"
[ 22936.800] (II) Using input driver 'evdev' for 'Logitech USB Gaming Mouse'
[ 22936.800] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22936.800] (**) Logitech USB Gaming Mouse: always reports core events
[ 22936.800] (**) Logitech USB Gaming Mouse: Device: "/dev/input/event2"
[ 22936.800] (--) Logitech USB Gaming Mouse: Found 20 mouse buttons
[ 22936.800] (--) Logitech USB Gaming Mouse: Found scroll wheel(s)
[ 22936.800] (--) Logitech USB Gaming Mouse: Found relative axes
[ 22936.800] (--) Logitech USB Gaming Mouse: Found x and y relative axes
[ 22936.800] (II) Logitech USB Gaming Mouse: Configuring as mouse
[ 22936.800] (II) Logitech USB Gaming Mouse: Adding scrollwheel support
[ 22936.800] (**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
[ 22936.800] (**) Logitech USB Gaming Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22936.800] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input2/event2"
[ 22936.800] (II) XINPUT: Adding extended input device "Logitech USB
Gaming Mouse" (type: MOUSE)
[ 22936.800] (II) Logitech USB Gaming Mouse: initialized for relative axes.
[ 22936.800] (**) Logitech USB Gaming Mouse: (accel) keeping
acceleration scheme 1
[ 22936.800] (**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
[ 22936.800] (**) Logitech USB Gaming Mouse: (accel) acceleration
factor: 2.000
[ 22936.800] (**) Logitech USB Gaming Mouse: (accel) acceleration
threshold: 4
[ 22936.801] (II) config/udev: Adding input device Logitech USB Gaming
Mouse (/dev/input/mouse0)
[ 22936.801] (II) No input driver/identifier specified (ignoring)
[ 22936.802] (II) config/udev: Adding input device zc3xx (/dev/input/event9)
[ 22936.802] (**) zc3xx: Applying InputClass "evdev keyboard catchall"
[ 22936.802] (II) Using input driver 'evdev' for 'zc3xx'
[ 22936.802] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22936.802] (**) zc3xx: always reports core events
[ 22936.802] (**) zc3xx: Device: "/dev/input/event9"
[ 22936.802] (--) zc3xx: Found keys
[ 22936.802] (II) zc3xx: Configuring as keyboard
[ 22936.802] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-1/input/input9/event9"
[ 22936.802] (II) XINPUT: Adding extended input device "zc3xx" (type:
KEYBOARD)
[ 22936.802] (**) Option "xkb_rules" "evdev"
[ 22936.802] (**) Option "xkb_model" "pc105"
[ 22936.802] (**) Option "xkb_layout" "fr"
[ 22936.802] (**) Option "xkb_variant" "latin9"
[ 22936.804] (II) config/udev: Adding input device HD-Audio Generic
HDMI/DP (/dev/input/event8)
[ 22936.804] (II) No input driver/identifier specified (ignoring)
[ 22936.806] (II) config/udev: Adding input device G15 Extra Keys
(/dev/input/event3)
[ 22936.806] (**) G15 Extra Keys: Applying InputClass "evdev keyboard
catchall"
[ 22936.806] (II) Using input driver 'evdev' for 'G15 Extra Keys'
[ 22936.806] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22936.806] (**) G15 Extra Keys: always reports core events
[ 22936.806] (**) G15 Extra Keys: Device: "/dev/input/event3"
[ 22936.806] (--) G15 Extra Keys: Found keys
[ 22936.806] (II) G15 Extra Keys: Configuring as keyboard
[ 22936.806] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input10/event3"
[ 22936.806] (II) XINPUT: Adding extended input device "G15 Extra Keys"
(type: KEYBOARD)
[ 22936.806] (**) Option "xkb_rules" "evdev"
[ 22936.806] (**) Option "xkb_model" "pc105"
[ 22936.806] (**) Option "xkb_layout" "fr"
[ 22936.806] (**) Option "xkb_variant" "latin9"
[ 22936.810] (II) fglrx(0): Restoring Recent Mode via PCS is not
supported in RANDR 1.2 capable environments
[ 22936.877] (II) fglrx(0): EDID vendor "SAM", prod id 1531
[ 22936.877] (II) fglrx(0): Using EDID range info for horizontal sync
[ 22936.877] (II) fglrx(0): Using EDID range info for vertical refresh
[ 22936.877] (II) fglrx(0): Printing DDC gathered Modelines:
[ 22936.877] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008
2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 22936.877] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 22936.877] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 22936.877] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 22936.877] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 22936.877] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328
1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 22936.877] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376
1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 22936.877] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 22936.877] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488
1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 22936.878] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664
1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 22936.878] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728
1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 22936.893] (II) fglrx(0): EDID vendor "SAM", prod id 1531
[ 22936.893] (II) fglrx(0): Using hsync ranges from config file
[ 22936.893] (II) fglrx(0): Using vrefresh ranges from config file
[ 22936.893] (II) fglrx(0): Printing DDC gathered Modelines:
[ 22936.893] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008
2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 22936.893] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 22936.893] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 22936.893] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 22936.893] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 22936.893] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328
1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 22936.893] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376
1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 22936.893] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 22936.893] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488
1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 22936.893] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664
1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 22936.893] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728
1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 22936.986] (II) fglrx(0): EDID vendor "SAM", prod id 1531
[ 22936.986] (II) fglrx(0): Using hsync ranges from config file
[ 22936.986] (II) fglrx(0): Using vrefresh ranges from config file
[ 22936.986] (II) fglrx(0): Printing DDC gathered Modelines:
[ 22936.986] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008
2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 22936.986] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 22936.986] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 22936.986] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 22936.986] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 22936.986] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328
1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 22936.986] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376
1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 22936.986] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 22936.986] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488
1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 22936.986] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664
1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 22936.986] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728
1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages fglrx-driver depends on:
ii glx-alternative-fglrx 0.1.91 allows the selection of
FGLRX as G
ii libc6 2.13-16 Embedded GNU C Library:
Shared lib
ii libgcc1 1:4.6.1-6 GCC support library
ii libgl1-mesa-glx [libgl1] 7.10.3-4 free implementation of the
OpenGL
ii libstdc++6 4.6.1-6 GNU Standard C++ Library v3
ii libx11-6 2:1.4.4-1 X11 client-side library
ii libxext6 2:1.3.0-3 X11 miscellaneous extension
librar
ii libxinerama1 2:1.1.1-3 X11 Xinerama extension library
ii libxrandr2 2:1.3.2-2 X11 RandR extension library
ii libxrender1 1:0.9.6-2 X Rendering Extension
client libra
ii xserver-xorg-core [xorg-video 2:1.10.3-1 Xorg X server - core server
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:11-7-4 external events daemon for
the non
ii fglrx-glx 1:11-7-4 proprietary libGL for the
non-free
ii fglrx-glx-ia32 1:11-7-4 proprietary libGL for the
non-free
ii fglrx-modules-dkms 1:11-7-4 dkms module source for the
non-fre
Versions of packages fglrx-driver suggests:
ii fglrx-control 1:11-7-4 control panel for the
non-free ATI
ii xvba-va-driver 0.8.0-1 XvBA-based backend for VA
API (AMD
-- no debconf information/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pkg-fglrx-devel/attachments/20110813/dc62b68d/attachment-0001.html>
More information about the Pkg-fglrx-devel
mailing list