[Pkg-fglrx-devel] Bug#613829: fglrx-driver: False dependency, -abi-8.0 should be -abi-8
Alf Gaida
info at g-com.eu
Thu Feb 17 15:07:29 UTC 2011
Package: fglrx-driver
Version: 1:11-1-3.1
Severity: grave
Tags: sid
Justification: renders package unusable
-- Package-specific info:
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: ATI Technologies Inc RV790 [Radeon HD 4890]
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 1.257481] PCI-DMA: Disabling AGP.
[ 1.257800] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.265844] Linux agpgart interface v0.103
[ 3.399735] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 3.443360] [fglrx] Maximum main memory to use for locked dma buffers: 7770 MBytes.
[ 3.443580] [fglrx] vendor: 1002 device: 9460 count: 1
[ 3.443924] [fglrx] ioport: bar 4, base 0xce00, size: 0x100
[ 3.444207] [fglrx] Kernel PAT support is enabled
[ 3.444274] [fglrx] module loaded - fglrx 8.81.5 [Dec 8 2010] with 1 minors
[ 9.677503] fglrx_pci 0000:01:00.0: irq 43 for MSI/MSI-X
[ 9.677939] [fglrx] Firegl kernel thread PID: 2860
[ 9.678104] [fglrx] IRQ 43 Enabled
[ 10.187997] [fglrx] Gart USWC size:1280 M.
[ 10.188001] [fglrx] Gart cacheable size:508 M.
[ 10.188005] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 10.188008] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[ 10.188010] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 684 Feb 6 15:39 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 45681 Feb 17 15:04 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 9.361]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 9.363] X Protocol Version 11, Revision 0
[ 9.363] Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
[ 9.363] Current Operating System: Linux ramme.g-com.eu 2.6.37-0.gc.21-gcom-amd64 #1 SMP PREEMPT Sat Feb 12 02:49:17 CET 2011 x86_64
[ 9.363] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/disk/by-label/aptosid ro radeon.modeset=0 nolapic_timer
[ 9.364] Build Date: 16 February 2011 10:26:40PM
[ 9.364] xorg-server 2:1.9.4-2 (Cyril Brulebois <kibi at debian.org>)
[ 9.364] Current version of pixman: 0.21.4
[ 9.364] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.364] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.364] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 17 15:01:51 2011
[ 9.366] (==) Using config file: "/etc/X11/xorg.conf"
[ 9.366] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.372] (==) ServerLayout "aticonfig Layout"
[ 9.372] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 9.372] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 9.373] (**) | |-->Device "aticonfig-Device[0]-0"
[ 9.373] (==) Automatically adding devices
[ 9.373] (==) Automatically enabling devices
[ 9.377] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 9.377] Entry deleted from font path.
[ 9.382] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 9.382] Entry deleted from font path.
[ 9.382] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 9.382] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.382] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.382] (II) Loader magic: 0x7cfac0
[ 9.382] (II) Module ABI versions:
[ 9.382] X.Org ANSI C Emulation: 0.4
[ 9.382] X.Org Video Driver: 8.0
[ 9.382] X.Org XInput driver : 11.0
[ 9.382] X.Org Server Extension : 4.0
[ 9.383] (--) PCI:*(0:1:0:0) 1002:9460:174b:e115 rev 0, Mem @ 0xd0000000/268435456, 0xfdae0000/65536, I/O @ 0x0000ce00/256, BIOS @ 0x????????/131072
[ 9.383] (II) Open ACPI successful (/var/run/acpid.socket)
[ 9.383] (II) "extmod" will be loaded by default.
[ 9.383] (II) "dbe" will be loaded by default.
[ 9.383] (II) "glx" will be loaded by default.
[ 9.383] (II) "record" will be loaded by default.
[ 9.383] (II) "dri" will be loaded by default.
[ 9.383] (II) "dri2" will be loaded by default.
[ 9.383] (II) LoadModule: "extmod"
[ 9.386] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 9.387] (II) Module extmod: vendor="X.Org Foundation"
[ 9.387] compiled for 1.9.4, module version = 1.0.0
[ 9.387] Module class: X.Org Server Extension
[ 9.387] ABI class: X.Org Server Extension, version 4.0
[ 9.387] (II) Loading extension SELinux
[ 9.387] (II) Loading extension MIT-SCREEN-SAVER
[ 9.387] (II) Loading extension XFree86-VidModeExtension
[ 9.387] (II) Loading extension XFree86-DGA
[ 9.387] (II) Loading extension DPMS
[ 9.387] (II) Loading extension XVideo
[ 9.387] (II) Loading extension XVideo-MotionCompensation
[ 9.387] (II) Loading extension X-Resource
[ 9.387] (II) LoadModule: "dbe"
[ 9.387] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 9.388] (II) Module dbe: vendor="X.Org Foundation"
[ 9.388] compiled for 1.9.4, module version = 1.0.0
[ 9.388] Module class: X.Org Server Extension
[ 9.388] ABI class: X.Org Server Extension, version 4.0
[ 9.388] (II) Loading extension DOUBLE-BUFFER
[ 9.388] (II) LoadModule: "glx"
[ 9.388] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.390] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 9.391] compiled for 7.6.0, module version = 1.0.0
[ 9.391] (II) Loading extension GLX
[ 9.391] (II) LoadModule: "record"
[ 9.391] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 9.392] (II) Module record: vendor="X.Org Foundation"
[ 9.392] compiled for 1.9.4, module version = 1.13.0
[ 9.392] Module class: X.Org Server Extension
[ 9.392] ABI class: X.Org Server Extension, version 4.0
[ 9.392] (II) Loading extension RECORD
[ 9.392] (II) LoadModule: "dri"
[ 9.392] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 9.393] (II) Module dri: vendor="X.Org Foundation"
[ 9.393] compiled for 1.9.4, module version = 1.0.0
[ 9.393] ABI class: X.Org Server Extension, version 4.0
[ 9.393] (II) Loading extension XFree86-DRI
[ 9.393] (II) LoadModule: "dri2"
[ 9.393] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 9.393] (II) Module dri2: vendor="X.Org Foundation"
[ 9.393] compiled for 1.9.4, module version = 1.2.0
[ 9.393] ABI class: X.Org Server Extension, version 4.0
[ 9.393] (II) Loading extension DRI2
[ 9.393] (II) LoadModule: "fglrx"
[ 9.393] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 9.455] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 9.456] compiled for 1.4.99.906, module version = 8.81.5
[ 9.456] Module class: X.Org Video Driver
[ 9.457] (II) Loading sub module "fglrxdrm"
[ 9.457] (II) LoadModule: "fglrxdrm"
[ 9.457] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 9.458] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 9.458] compiled for 1.4.99.906, module version = 8.81.5
[ 9.458] (II) ATI Proprietary Linux Driver Version Identifier:8.81.5
[ 9.458] (II) ATI Proprietary Linux Driver Release Identifier: 8.81
[ 9.458] (II) ATI Proprietary Linux Driver Build Date: Dec 8 2010 21:47:49
[ 9.458] (++) using VT number 7
[ 9.460] (WW) Falling back to old probe method for fglrx
[ 9.468] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 9.469] (--) Chipset Supported AMD Graphics Processor (0x9460) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:0:0) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:2:0) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:7:0) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:9:0) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:10:0) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:17:0) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:0) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:1) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:2) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:0) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:1) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:2) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:0) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:1) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:2) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:3) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:4) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:5) found
[ 9.469] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 1:0:1) found
[ 9.470] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 9.470] (II) AMD Video driver is signed
[ 9.470] (II) fglrx(0): pEnt->device->identifier=0xdb00d0
[ 9.470] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 9.470] (II) Loading sub module "vgahw"
[ 9.470] (II) LoadModule: "vgahw"
[ 9.471] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 9.472] (II) Module vgahw: vendor="X.Org Foundation"
[ 9.472] compiled for 1.9.4, module version = 0.1.0
[ 9.472] ABI class: X.Org Video Driver, version 8.0
[ 9.472] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 9.472] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 9.472] (==) fglrx(0): Default visual is TrueColor
[ 9.472] (**) fglrx(0): Option "DPMS" "true"
[ 9.472] (==) fglrx(0): RGB weight 888
[ 9.472] (II) fglrx(0): Using 8 bits per RGB
[ 9.472] (==) fglrx(0): Buffer Tiling is ON
[ 9.473] (II) Loading sub module "fglrxdrm"
[ 9.473] (II) LoadModule: "fglrxdrm"
[ 9.473] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 9.474] ukiDynamicMajor: found major device number 251
[ 9.474] ukiDynamicMajor: found major device number 251
[ 9.474] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9.474] ukiOpenDevice: node name is /dev/ati/card0
[ 9.474] ukiOpenDevice: open result is 11, (OK)
[ 9.474] ukiOpenByBusid: ukiOpenMinor returns 11
[ 9.474] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9.474] (==) fglrx(0): NoAccel = NO
[ 9.474] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 9.474] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series " (Chipset = 0x9460)
[ 9.474] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe115)
[ 9.474] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 9.474] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 9.474] (--) fglrx(0): MMIO registers at 0xfdae0000
[ 9.474] (--) fglrx(0): I/O port at 0x0000ce00
[ 9.474] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 9.493] (II) fglrx(0): AC Adapter is used
[ 9.505] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 9.605] (II) Loading sub module "vbe"
[ 9.605] (II) LoadModule: "vbe"
[ 9.605] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 9.606] (II) Module vbe: vendor="X.Org Foundation"
[ 9.606] compiled for 1.9.4, module version = 1.1.0
[ 9.606] ABI class: X.Org Video Driver, version 8.0
[ 9.606] (II) fglrx(0): VESA BIOS detected
[ 9.606] (II) fglrx(0): VESA VBE Version 3.0
[ 9.606] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 9.606] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 9.606] (II) fglrx(0): VESA VBE OEM Software Rev: 11.22
[ 9.606] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 9.606] (II) fglrx(0): VESA VBE OEM Product: RV790
[ 9.606] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 9.638] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 9.638] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 9.638] (II) fglrx(0): PCIE card detected
[ 9.638] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 9.638] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 9.640] (II) fglrx(0): Using adapter: 1:0.0.
[ 9.671] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 9.678] (II) fglrx(0): Interrupt handler installed at IRQ 43.
[ 9.678] (II) fglrx(0): RandR 1.2 support is enabled!
[ 9.678] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 9.678] (==) fglrx(0): Center Mode is disabled
[ 9.678] (II) Loading sub module "fb"
[ 9.678] (II) LoadModule: "fb"
[ 9.678] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.679] (II) Module fb: vendor="X.Org Foundation"
[ 9.679] compiled for 1.9.4, module version = 1.0.0
[ 9.679] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.679] (II) Loading sub module "ddc"
[ 9.679] (II) LoadModule: "ddc"
[ 9.679] (II) Module "ddc" already built-in
[ 10.088] (II) fglrx(0): Finished Initialize PPLIB!
[ 10.091] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 10.091] (II) fglrx(0): Output DFP2 has no monitor section
[ 10.091] (II) fglrx(0): Output DFP3 has no monitor section
[ 10.091] (II) fglrx(0): Output CRT1 has no monitor section
[ 10.091] (II) fglrx(0): Output CRT2 has no monitor section
[ 10.091] (II) Loading sub module "ddc"
[ 10.091] (II) LoadModule: "ddc"
[ 10.091] (II) Module "ddc" already built-in
[ 10.091] (II) fglrx(0): Connected Display0: DFP2
[ 10.091] (II) fglrx(0): Display0 EDID data ---------------------------
[ 10.091] (II) fglrx(0): Manufacturer: SAM Model: 3f4 Serial#: 1413755446
[ 10.091] (II) fglrx(0): Year: 2008 Week: 10
[ 10.091] (II) fglrx(0): EDID Version: 1.3
[ 10.091] (II) fglrx(0): Digital Display Input
[ 10.091] (II) fglrx(0): Max Image Size [cm]: horiz.: 55 vert.: 34
[ 10.091] (II) fglrx(0): Gamma: 2.20
[ 10.091] (II) fglrx(0): DPMS capabilities: Off
[ 10.091] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 10.091] (II) fglrx(0): First detailed timing is preferred mode
[ 10.091] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 10.091] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 10.091] (II) fglrx(0): Supported established timings:
[ 10.091] (II) fglrx(0): 720x400 at 70Hz
[ 10.091] (II) fglrx(0): 640x480 at 60Hz
[ 10.091] (II) fglrx(0): 640x480 at 67Hz
[ 10.091] (II) fglrx(0): 640x480 at 72Hz
[ 10.091] (II) fglrx(0): 640x480 at 75Hz
[ 10.091] (II) fglrx(0): 800x600 at 56Hz
[ 10.091] (II) fglrx(0): 800x600 at 60Hz
[ 10.091] (II) fglrx(0): 800x600 at 72Hz
[ 10.091] (II) fglrx(0): 800x600 at 75Hz
[ 10.091] (II) fglrx(0): 832x624 at 75Hz
[ 10.091] (II) fglrx(0): 1024x768 at 60Hz
[ 10.091] (II) fglrx(0): 1024x768 at 70Hz
[ 10.091] (II) fglrx(0): 1024x768 at 75Hz
[ 10.092] (II) fglrx(0): 1280x1024 at 75Hz
[ 10.092] (II) fglrx(0): 1152x864 at 75Hz
[ 10.092] (II) fglrx(0): Manufacturer's mask: 0
[ 10.092] (II) fglrx(0): Supported standard timings:
[ 10.092] (II) fglrx(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 10.092] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 10.092] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 10.092] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 10.092] (II) fglrx(0): Supported detailed timing:
[ 10.092] (II) fglrx(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 10.092] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 10.092] (II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 10.092] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 10.092] (II) fglrx(0): Monitor name: SyncMaster
[ 10.092] (II) fglrx(0): Serial No: H1AK500000
[ 10.092] (II) fglrx(0): EDID (in hex):
[ 10.092] (II) fglrx(0): 00ffffffffffff004c2df40336324454
[ 10.092] (II) fglrx(0): 0a120103803722782aee91a3544c9926
[ 10.092] (II) fglrx(0): 0f5054bfef80a94081808140714f0101
[ 10.092] (II) fglrx(0): 010101010101283c80a070b023403020
[ 10.092] (II) fglrx(0): 360006442100001a000000fd00384b1e
[ 10.092] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 10.092] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 10.092] (II) fglrx(0): 004831414b3530303030300a20200088
[ 10.092] (II) fglrx(0): End of Display0 EDID data --------------------
[ 10.186] (II) fglrx(0): EDID for output DFP1
[ 10.186] (II) fglrx(0): EDID for output DFP2
[ 10.186] (II) fglrx(0): Manufacturer: SAM Model: 3f4 Serial#: 1413755446
[ 10.186] (II) fglrx(0): Year: 2008 Week: 10
[ 10.186] (II) fglrx(0): EDID Version: 1.3
[ 10.186] (II) fglrx(0): Digital Display Input
[ 10.186] (II) fglrx(0): Max Image Size [cm]: horiz.: 55 vert.: 34
[ 10.186] (II) fglrx(0): Gamma: 2.20
[ 10.186] (II) fglrx(0): DPMS capabilities: Off
[ 10.186] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 10.186] (II) fglrx(0): First detailed timing is preferred mode
[ 10.186] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 10.186] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 10.186] (II) fglrx(0): Supported established timings:
[ 10.186] (II) fglrx(0): 720x400 at 70Hz
[ 10.186] (II) fglrx(0): 640x480 at 60Hz
[ 10.186] (II) fglrx(0): 640x480 at 67Hz
[ 10.186] (II) fglrx(0): 640x480 at 72Hz
[ 10.186] (II) fglrx(0): 640x480 at 75Hz
[ 10.186] (II) fglrx(0): 800x600 at 56Hz
[ 10.186] (II) fglrx(0): 800x600 at 60Hz
[ 10.186] (II) fglrx(0): 800x600 at 72Hz
[ 10.186] (II) fglrx(0): 800x600 at 75Hz
[ 10.186] (II) fglrx(0): 832x624 at 75Hz
[ 10.186] (II) fglrx(0): 1024x768 at 60Hz
[ 10.186] (II) fglrx(0): 1024x768 at 70Hz
[ 10.186] (II) fglrx(0): 1024x768 at 75Hz
[ 10.186] (II) fglrx(0): 1280x1024 at 75Hz
[ 10.186] (II) fglrx(0): 1152x864 at 75Hz
[ 10.186] (II) fglrx(0): Manufacturer's mask: 0
[ 10.186] (II) fglrx(0): Supported standard timings:
[ 10.186] (II) fglrx(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 10.186] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 10.186] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 10.186] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 10.186] (II) fglrx(0): Supported detailed timing:
[ 10.186] (II) fglrx(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 10.186] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 10.186] (II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 10.186] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 10.186] (II) fglrx(0): Monitor name: SyncMaster
[ 10.186] (II) fglrx(0): Serial No: H1AK500000
[ 10.186] (II) fglrx(0): EDID (in hex):
[ 10.186] (II) fglrx(0): 00000000000000003a20454449442028
[ 10.186] (II) fglrx(0): 696e20686578293a0a000a00000a0026
[ 10.186] (II) fglrx(0): 0f5054bfef80a9405100000000000000
[ 10.186] (II) fglrx(0): 00000000000000003a202325693a2068
[ 10.186] (II) fglrx(0): 73697a653a20256920207673697a6520
[ 10.186] (II) fglrx(0): 25692020726566726573683a20256920
[ 10.186] (II) fglrx(0): 207669643a2025690a002020000000ff
[ 10.186] (II) fglrx(0): 004831414b3530304100000000000000
[ 10.186] (II) fglrx(0): Printing probed modes for output DFP2
[ 10.186] (II) fglrx(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 -hsync +vsync (74.0 kHz)
[ 10.186] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz)
[ 10.186] (II) fglrx(0): Modeline "1776x1000"x60.0 147.05 1776 1880 2072 2368 1000 1001 1004 1035 +hsync -vsync (62.1 kHz)
[ 10.186] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 +hsync -vsync (65.3 kHz)
[ 10.186] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +hsync -vsync (55.9 kHz)
[ 10.186] (II) fglrx(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 +hsync -vsync (49.7 kHz)
[ 10.186] (II) fglrx(0): Modeline "1152x648"x60.0 59.90 1152 1200 1320 1488 648 649 652 671 +hsync -vsync (40.3 kHz)
[ 10.186] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 -hsync -vsync (75.0 kHz)
[ 10.186] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[ 10.186] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[ 10.186] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[ 10.186] (II) fglrx(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 +hsync -vsync (75.2 kHz)
[ 10.186] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
[ 10.186] (II) fglrx(0): Modeline "1280x800"x75.0 107.21 1280 1360 1496 1712 800 801 804 835 +hsync -vsync (62.6 kHz)
[ 10.186] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 -hsync -vsync (67.5 kHz)
[ 10.186] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync -vsync (53.7 kHz)
[ 10.186] (II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz)
[ 10.186] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 10.186] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 10.186] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 10.186] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 10.186] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 10.186] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 10.186] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 10.186] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 10.186] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 10.187] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 -hsync -vsync (35.2 kHz)
[ 10.187] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 10.187] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 10.187] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 10.187] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 10.187] (II) fglrx(0): EDID for output DFP3
[ 10.187] (II) fglrx(0): EDID for output CRT1
[ 10.187] (II) fglrx(0): EDID for output CRT2
[ 10.187] (II) fglrx(0): Output DFP1 disconnected
[ 10.187] (II) fglrx(0): Output DFP2 connected
[ 10.187] (II) fglrx(0): Output DFP3 disconnected
[ 10.187] (II) fglrx(0): Output CRT1 disconnected
[ 10.187] (II) fglrx(0): Output CRT2 disconnected
[ 10.187] (II) fglrx(0): Using exact sizes for initial modes
[ 10.187] (II) fglrx(0): Output DFP2 using initial mode 1920x1200
[ 10.187] (II) fglrx(0): DPI set to (96, 96)
[ 10.187] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected.
[ 10.187] (==) fglrx(0): PseudoColor visuals disabled
[ 10.187] (II) Loading sub module "ramdac"
[ 10.187] (II) LoadModule: "ramdac"
[ 10.187] (II) Module "ramdac" already built-in
[ 10.187] (==) fglrx(0): NoDRI = NO
[ 10.187] (==) fglrx(0): Capabilities: 0x00000000
[ 10.187] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 10.187] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 10.187] (==) fglrx(0): UseFastTLS=0
[ 10.187] (==) fglrx(0): BlockSignalsOnLock=1
[ 10.187] (--) Depth 24 pixmap format is 32 bpp
[ 10.187] (II) Loading extension ATIFGLRXDRI
[ 10.187] (II) fglrx(0): doing swlDriScreenInit
[ 10.187] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 10.187] ukiDynamicMajor: found major device number 251
[ 10.187] ukiDynamicMajor: found major device number 251
[ 10.187] ukiDynamicMajor: found major device number 251
[ 10.187] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 10.187] ukiOpenDevice: node name is /dev/ati/card0
[ 10.187] ukiOpenDevice: open result is 16, (OK)
[ 10.187] ukiOpenByBusid: ukiOpenMinor returns 16
[ 10.187] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 10.187] (II) fglrx(0): [uki] DRM interface version 1.0
[ 10.187] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 10.187] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 10.187] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7ff1edc99000
[ 10.187] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 10.187] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 10.187] (II) fglrx(0): swlDriScreenInit done
[ 10.187] (II) fglrx(0): Kernel Module Version Information:
[ 10.187] (II) fglrx(0): Name: fglrx
[ 10.187] (II) fglrx(0): Version: 8.81.5
[ 10.187] (II) fglrx(0): Date: Dec 8 2010
[ 10.187] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 10.187] (II) fglrx(0): Kernel Module version matches driver.
[ 10.187] (II) fglrx(0): Kernel Module Build Time Information:
[ 10.187] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.37-0.gc.21-gcom-amd64
[ 10.187] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 10.187] (II) fglrx(0): Build-Kernel __SMP__: no
[ 10.187] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 10.187] (II) fglrx(0): [uki] register handle = 0x00004000
[ 10.200] (II) fglrx(0): DRI initialization successfull
[ 10.200] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
[ 10.201] (==) fglrx(0): Backing store disabled
[ 10.201] (II) Loading extension FGLRXEXTENSION
[ 10.201] (**) fglrx(0): DPMS enabled
[ 10.202] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 10.202] (**) fglrx(0): Textured Video is enabled.
[ 10.202] (II) LoadModule: "glesx"
[ 10.202] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 10.215] (II) Module glesx: vendor="X.Org Foundation"
[ 10.215] compiled for 1.4.99.906, module version = 1.0.0
[ 10.215] (II) Loading extension GLESX
[ 10.215] (II) fglrx(0): GLESX enableFlags = 528
[ 10.216] (II) fglrx(0): GLESX is enabled
[ 10.216] (II) LoadModule: "amdxmm"
[ 10.216] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 10.218] (II) Module amdxmm: vendor="X.Org Foundation"
[ 10.218] compiled for 1.4.99.906, module version = 2.0.0
[ 10.218] (II) Loading extension AMDXVOPL
[ 10.219] (II) Loading extension AMDXVBA
[ 10.223] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 10.228] (II) fglrx(0): Enable composite support successfully
[ 10.228] (WW) fglrx(0): Option "VendorName" is not used
[ 10.228] (WW) fglrx(0): Option "ModelName" is not used
[ 10.228] (II) fglrx(0): X context handle = 0x1
[ 10.228] (II) fglrx(0): [DRI] installation complete
[ 10.228] (==) fglrx(0): Silken mouse enabled
[ 10.230] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 10.230] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 10.306] (--) RandR disabled
[ 10.306] (II) Initializing built-in extension Generic Event Extension
[ 10.306] (II) Initializing built-in extension SHAPE
[ 10.306] (II) Initializing built-in extension MIT-SHM
[ 10.306] (II) Initializing built-in extension XInputExtension
[ 10.306] (II) Initializing built-in extension XTEST
[ 10.306] (II) Initializing built-in extension BIG-REQUESTS
[ 10.306] (II) Initializing built-in extension SYNC
[ 10.306] (II) Initializing built-in extension XKEYBOARD
[ 10.306] (II) Initializing built-in extension XC-MISC
[ 10.306] (II) Initializing built-in extension XINERAMA
[ 10.306] (II) Initializing built-in extension XFIXES
[ 10.306] (II) Initializing built-in extension RENDER
[ 10.306] (II) Initializing built-in extension RANDR
[ 10.306] (II) Initializing built-in extension COMPOSITE
[ 10.306] (II) Initializing built-in extension DAMAGE
[ 10.307] (II) SELinux: Disabled on system
[ 10.308] ukiDynamicMajor: found major device number 251
[ 10.308] ukiDynamicMajor: found major device number 251
[ 10.308] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 10.308] ukiOpenDevice: node name is /dev/ati/card0
[ 10.308] ukiOpenDevice: open result is 17, (OK)
[ 10.308] ukiOpenByBusid: ukiOpenMinor returns 17
[ 10.308] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 10.467] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 10.486] (II) fglrx(0): Enable the clock gating!
[ 10.486] (II) fglrx(0): Setting screen physical size to 508 x 317
[ 10.607] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 10.607] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.607] (II) LoadModule: "evdev"
[ 10.607] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.608] (II) Module evdev: vendor="X.Org Foundation"
[ 10.608] compiled for 1.9.4, module version = 2.6.0
[ 10.608] Module class: X.Org XInput Driver
[ 10.608] ABI class: X.Org XInput driver, version 11.0
[ 10.608] (**) Power Button: always reports core events
[ 10.608] (**) Power Button: Device: "/dev/input/event5"
[ 10.610] (--) Power Button: Found keys
[ 10.610] (II) Power Button: Configuring as keyboard
[ 10.610] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 10.610] (**) Option "xkb_rules" "evdev"
[ 10.610] (**) Option "xkb_model" "pc105"
[ 10.610] (**) Option "xkb_layout" "de,us"
[ 10.610] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
[ 10.632] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 10.633] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.633] (**) Power Button: always reports core events
[ 10.633] (**) Power Button: Device: "/dev/input/event4"
[ 10.635] (--) Power Button: Found keys
[ 10.635] (II) Power Button: Configuring as keyboard
[ 10.635] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 10.635] (**) Option "xkb_rules" "evdev"
[ 10.635] (**) Option "xkb_model" "pc105"
[ 10.635] (**) Option "xkb_layout" "de,us"
[ 10.635] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
[ 10.644] (II) config/udev: Adding input device MLK Wireless Desktop (/dev/input/event0)
[ 10.644] (**) MLK Wireless Desktop: Applying InputClass "evdev keyboard catchall"
[ 10.644] (**) MLK Wireless Desktop: always reports core events
[ 10.644] (**) MLK Wireless Desktop: Device: "/dev/input/event0"
[ 10.647] (--) MLK Wireless Desktop: Found keys
[ 10.647] (II) MLK Wireless Desktop: Configuring as keyboard
[ 10.647] (II) XINPUT: Adding extended input device "MLK Wireless Desktop" (type: KEYBOARD)
[ 10.647] (**) Option "xkb_rules" "evdev"
[ 10.647] (**) Option "xkb_model" "pc105"
[ 10.647] (**) Option "xkb_layout" "de,us"
[ 10.647] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
[ 10.648] (II) config/udev: Adding input device MLK Wireless Desktop (/dev/input/event1)
[ 10.648] (**) MLK Wireless Desktop: Applying InputClass "evdev pointer catchall"
[ 10.648] (**) MLK Wireless Desktop: Applying InputClass "evdev keyboard catchall"
[ 10.648] (**) MLK Wireless Desktop: always reports core events
[ 10.648] (**) MLK Wireless Desktop: Device: "/dev/input/event1"
[ 10.652] (--) MLK Wireless Desktop: Found 9 mouse buttons
[ 10.652] (--) MLK Wireless Desktop: Found scroll wheel(s)
[ 10.652] (--) MLK Wireless Desktop: Found relative axes
[ 10.652] (--) MLK Wireless Desktop: Found x and y relative axes
[ 10.652] (--) MLK Wireless Desktop: Found absolute axes
[ 10.652] (--) MLK Wireless Desktop: Found keys
[ 10.652] (II) MLK Wireless Desktop: Configuring as mouse
[ 10.652] (II) MLK Wireless Desktop: Configuring as keyboard
[ 10.652] (II) MLK Wireless Desktop: Adding scrollwheel support
[ 10.652] (**) MLK Wireless Desktop: YAxisMapping: buttons 4 and 5
[ 10.652] (**) MLK Wireless Desktop: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.652] (II) XINPUT: Adding extended input device "MLK Wireless Desktop" (type: KEYBOARD)
[ 10.652] (**) Option "xkb_rules" "evdev"
[ 10.652] (**) Option "xkb_model" "pc105"
[ 10.652] (**) Option "xkb_layout" "de,us"
[ 10.652] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
[ 10.653] (**) MLK Wireless Desktop: (accel) keeping acceleration scheme 1
[ 10.653] (**) MLK Wireless Desktop: (accel) acceleration profile 0
[ 10.653] (**) MLK Wireless Desktop: (accel) acceleration factor: 2.000
[ 10.653] (**) MLK Wireless Desktop: (accel) acceleration threshold: 4
[ 10.653] (II) MLK Wireless Desktop: initialized for relative axes.
[ 10.653] (WW) MLK Wireless Desktop: ignoring absolute axes.
[ 10.653] (II) config/udev: Adding input device MLK Wireless Desktop (/dev/input/mouse0)
[ 10.653] (II) No input driver/identifier specified (ignoring)
[ 10.654] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 10.654] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 10.654] (**) Logitech USB Receiver: always reports core events
[ 10.654] (**) Logitech USB Receiver: Device: "/dev/input/event2"
[ 10.657] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 10.657] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 10.657] (--) Logitech USB Receiver: Found relative axes
[ 10.657] (--) Logitech USB Receiver: Found x and y relative axes
[ 10.657] (II) Logitech USB Receiver: Configuring as mouse
[ 10.657] (II) Logitech USB Receiver: Adding scrollwheel support
[ 10.657] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 10.657] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.657] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[ 10.657] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 10.657] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 10.657] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 10.657] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 10.657] (II) Logitech USB Receiver: initialized for relative axes.
[ 10.658] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 10.658] (II) No input driver/identifier specified (ignoring)
[ 10.658] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 10.659] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 10.659] (**) Logitech USB Receiver: always reports core events
[ 10.659] (**) Logitech USB Receiver: Device: "/dev/input/event3"
[ 10.663] (--) Logitech USB Receiver: Found 1 mouse buttons
[ 10.663] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 10.663] (--) Logitech USB Receiver: Found relative axes
[ 10.663] (--) Logitech USB Receiver: Found absolute axes
[ 10.663] (--) Logitech USB Receiver: Found keys
[ 10.663] (II) Logitech USB Receiver: Configuring as mouse
[ 10.663] (II) Logitech USB Receiver: Configuring as keyboard
[ 10.663] (II) Logitech USB Receiver: Adding scrollwheel support
[ 10.663] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 10.664] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.664] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 10.664] (**) Option "xkb_rules" "evdev"
[ 10.664] (**) Option "xkb_model" "pc105"
[ 10.664] (**) Option "xkb_layout" "de,us"
[ 10.664] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
[ 10.664] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[ 10.664] (II) Logitech USB Receiver: initialized for absolute axes.
[ 10.670] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event7)
[ 10.670] (II) No input driver/identifier specified (ignoring)
[ 10.674] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 10.674] (II) No input driver/identifier specified (ignoring)
[ 10.676] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event8)
[ 10.676] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 10.676] (**) ACPI Virtual Keyboard Device: always reports core events
[ 10.676] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event8"
[ 10.679] (--) ACPI Virtual Keyboard Device: Found keys
[ 10.679] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 10.679] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[ 10.679] (**) Option "xkb_rules" "evdev"
[ 10.679] (**) Option "xkb_model" "pc105"
[ 10.679] (**) Option "xkb_layout" "de,us"
[ 10.679] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
[ 10.706] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 153.034] (II) fglrx(0): EDID vendor "SAM", prod id 1012
[ 153.034] (II) fglrx(0): Using EDID range info for horizontal sync
[ 153.034] (II) fglrx(0): Using EDID range info for vertical refresh
[ 153.034] (II) fglrx(0): Printing DDC gathered Modelines:
[ 153.034] (II) fglrx(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 153.034] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 153.034] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 153.034] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 153.034] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 153.034] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 153.034] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 153.034] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 153.034] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 153.034] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 153.034] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 153.034] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 153.034] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 153.034] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 153.034] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 153.034] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 153.034] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 153.034] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 153.034] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 153.711] (II) fglrx(0): EDID vendor "SAM", prod id 1012
[ 153.711] (II) fglrx(0): Using hsync ranges from config file
[ 153.711] (II) fglrx(0): Using vrefresh ranges from config file
[ 153.711] (II) fglrx(0): Printing DDC gathered Modelines:
[ 153.711] (II) fglrx(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 153.711] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 153.711] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 153.711] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 153.711] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 153.711] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 153.711] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 153.711] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 153.711] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 153.711] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 153.711] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 153.711] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 153.711] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 153.711] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 153.711] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 153.711] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 153.711] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 153.711] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 153.711] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 153.874] (II) fglrx(0): EDID vendor "SAM", prod id 1012
[ 153.874] (II) fglrx(0): Using hsync ranges from config file
[ 153.874] (II) fglrx(0): Using vrefresh ranges from config file
[ 153.874] (II) fglrx(0): Printing DDC gathered Modelines:
[ 153.874] (II) fglrx(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 153.874] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 153.874] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 153.874] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 153.874] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 153.874] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 153.874] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 153.874] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 153.874] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 153.874] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 153.874] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 153.874] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 153.874] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 153.874] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 153.874] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 153.874] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 153.874] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 153.874] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 153.874] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.37-0.gc.21-gcom-amd64 (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages fglrx-driver depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii fglrx-glx 1:11-1-3.1 proprietary libGL for the non-free
ii laptop-detect 0.13.7 attempt to detect a laptop
ii libc6 2.11.2-11 Embedded GNU C Library: Shared lib
ii libgcc1 1:4.4.5-11 GCC support library
ii libgl1-mesa-glx [libgl1] 7.10-4 A free implementation of the OpenG
ii libx11-6 2:1.4.1-4 X11 client-side library
ii libxext6 2:1.2.0-2 X11 miscellaneous extension librar
ii libxinerama1 2:1.1.1-1 X11 Xinerama extension library
ii libxrandr2 2:1.3.1-1 X11 RandR extension library
ii libxrender1 1:0.9.6-1 X Rendering Extension client libra
ii xserver-xorg 1:7.6+3 the X.Org X server
ii xserver-xorg-core [xorg-video 2:1.9.4-2 Xorg X server - core server
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:11-1-3.1 external events daemon for the non
ii fglrx-glx 1:11-1-3.1 proprietary libGL for the non-free
ii fglrx-glx-ia32 1:11-1-3.1 proprietary libGL for the non-free
ii fglrx-modules-dkms 1:11-1-3.1 dkms module source for the non-fre
ii fglrx-source 1:11-1-3.1 kernel module source for the non-f
Versions of packages fglrx-driver suggests:
ii fglrx-control 1:11-1-3.1 control panel for the non-free ATI
pn xvba-va-driver <none> (no description available)
-- debconf information excluded
--Patch:
diff -ur fglrx-driver-11-1//debian/control fglrx-alf/debian/control
--- fglrx-driver-11-1//debian/control 2011-02-17 15:45:41.868174001 +0100
+++ fglrx-alf/debian/control 2011-02-17 14:57:13.183860002 +0100
@@ -16,7 +16,7 @@
Package: fglrx-driver
Architecture: i386 amd64
Depends: ${misc:Depends}, ${shlibs:Depends}, xserver-xorg (>= 1:7.6+1),
- laptop-detect, xorg-video-abi-8.0
+ laptop-detect, xorg-video-abi-8
Recommends: fglrx-modules-dkms (= ${binary:Version}) | fglrx-source (= ${binary:Version}),
fglrx-glx, fglrx-glx-ia32 [amd64], fglrx-atieventsd
Provides: xorg-driver-video
More information about the Pkg-fglrx-devel
mailing list