[Pkg-fglrx-devel] Bug#614705: fglrx-glx: Qt textures show up as blank
Daniel Schepler
dschepler at scalable-networks.com
Tue Feb 22 23:52:07 UTC 2011
Package: fglrx-glx
Version: 1:11-2-1
Severity: normal
To reproduce, install qt4-demos and run
/usr/lib/qt4/examples/opengl/textures/textures. On my machine the
cubes are solid white.
-- Package-specific info:
VGA-compatible devices on PCI bus:
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.312359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.743336] Linux agpgart interface v0.103
[ 8.682987] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 8.913683] [fglrx] Maximum main memory to use for locked dma buffers: 3554 MBytes.
[ 8.913754] [fglrx] vendor: 1002 device: 9612 count: 1
[ 8.914324] [fglrx] ioport: bar 1, base 0x7000, size: 0x100
[ 8.914910] [fglrx] Kernel PAT support is enabled
[ 8.914944] [fglrx] module loaded - fglrx 8.82.8 [Jan 26 2011] with 1 minors
[ 36.897662] [fglrx] ATIF platform detected with notification ID: 0x81
[ 38.010187] [fglrx] GART Table is not in FRAME_BUFFER range
[ 38.011279] [fglrx] Could not enable MSI; System prevented initialization
[ 38.014217] [fglrx] Firegl kernel thread PID: 1873
[ 38.014624] [fglrx] Firegl kernel thread PID: 1874
[ 38.014890] [fglrx] Firegl kernel thread PID: 1875
[ 38.015521] [fglrx] IRQ 18 Enabled
[ 39.150643] [fglrx] Gart USWC size:1160 M.
[ 39.150649] [fglrx] Gart cacheable size:460 M.
[ 39.150655] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 39.150659] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1462 Dec 15 13:11 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-LVDS"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1440x900"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-CRT1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-LVDS" "0-LVDS"
Option "Monitor-CRT1" "0-CRT1"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 46232 Mar 3 2009 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 37714 Feb 22 15:12 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 32.977]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 32.977] X Protocol Version 11, Revision 0
[ 32.977] Build Operating System: Linux 2.6.37-1-amd64 x86_64 Debian
[ 32.977] Current Operating System: Linux frobozz 2.6.37-1-amd64 #1 SMP Wed Feb 16 12:49:49 UTC 2011 x86_64
[ 32.977] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-1-amd64 root=UUID=a4992605-9cb9-44cf-aaaa-7f5d0818dda0 ro quiet
[ 32.978] Build Date: 21 February 2011 12:38:07AM
[ 32.978] xorg-server 2:1.9.4-3+pb1 (Pbuildd daemon <pbuildd at frobozz.homelinux.net>)
[ 32.978] Current version of pixman: 0.21.4
[ 32.978] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 32.978] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 32.979] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 22 10:45:14 2011
[ 33.095] (==) Using config file: "/etc/X11/xorg.conf"
[ 33.151] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 33.299] (==) ServerLayout "aticonfig Layout"
[ 33.299] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 33.299] (**) | |-->Monitor "<default monitor>"
[ 33.301] (**) | |-->Device "aticonfig-Device[0]-0"
[ 33.301] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
[ 33.301] (**) Option "Xinerama" "off"
[ 33.301] (==) Automatically adding devices
[ 33.301] (==) Automatically enabling devices
[ 33.396] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 33.396] Entry deleted from font path.
[ 33.552] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 33.552] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 33.552] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 33.552] (II) Loader magic: 0x7cfac0
[ 33.552] (II) Module ABI versions:
[ 33.552] X.Org ANSI C Emulation: 0.4
[ 33.552] X.Org Video Driver: 8.0
[ 33.552] X.Org XInput driver : 11.0
[ 33.552] X.Org Server Extension : 4.0
[ 33.576] (--) PCI:*(0:1:5:0) 1002:9612:103c:30fc rev 0, Mem @ 0xc0000000/268435456, 0xd2400000/65536, 0xd2300000/1048576, I/O @ 0x00007000/256
[ 33.577] (II) Open ACPI successful (/var/run/acpid.socket)
[ 33.577] (II) "extmod" will be loaded by default.
[ 33.578] (II) "dbe" will be loaded by default.
[ 33.578] (II) "glx" will be loaded by default.
[ 33.578] (II) "record" will be loaded by default.
[ 33.578] (II) "dri" will be loaded by default.
[ 33.578] (II) "dri2" will be loaded by default.
[ 33.578] (II) LoadModule: "extmod"
[ 33.693] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 33.705] (II) Module extmod: vendor="X.Org Foundation"
[ 33.705] compiled for 1.9.4, module version = 1.0.0
[ 33.705] Module class: X.Org Server Extension
[ 33.705] ABI class: X.Org Server Extension, version 4.0
[ 33.705] (II) Loading extension SELinux
[ 33.705] (II) Loading extension MIT-SCREEN-SAVER
[ 33.705] (II) Loading extension XFree86-VidModeExtension
[ 33.705] (II) Loading extension XFree86-DGA
[ 33.705] (II) Loading extension DPMS
[ 33.705] (II) Loading extension XVideo
[ 33.706] (II) Loading extension XVideo-MotionCompensation
[ 33.706] (II) Loading extension X-Resource
[ 33.706] (II) LoadModule: "dbe"
[ 33.706] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 33.707] (II) Module dbe: vendor="X.Org Foundation"
[ 33.707] compiled for 1.9.4, module version = 1.0.0
[ 33.707] Module class: X.Org Server Extension
[ 33.708] ABI class: X.Org Server Extension, version 4.0
[ 33.708] (II) Loading extension DOUBLE-BUFFER
[ 33.708] (II) LoadModule: "glx"
[ 33.708] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 33.945] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 33.946] compiled for 6.9.0, module version = 1.0.0
[ 33.947] (II) Loading extension GLX
[ 33.947] (II) LoadModule: "record"
[ 33.947] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 33.972] (II) Module record: vendor="X.Org Foundation"
[ 33.973] compiled for 1.9.4, module version = 1.13.0
[ 33.973] Module class: X.Org Server Extension
[ 33.973] ABI class: X.Org Server Extension, version 4.0
[ 33.973] (II) Loading extension RECORD
[ 33.973] (II) LoadModule: "dri"
[ 33.973] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 34.092] (II) Module dri: vendor="X.Org Foundation"
[ 34.092] compiled for 1.9.4, module version = 1.0.0
[ 34.093] ABI class: X.Org Server Extension, version 4.0
[ 34.093] (II) Loading extension XFree86-DRI
[ 34.093] (II) LoadModule: "dri2"
[ 34.093] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 34.118] (II) Module dri2: vendor="X.Org Foundation"
[ 34.118] compiled for 1.9.4, module version = 1.2.0
[ 34.118] ABI class: X.Org Server Extension, version 4.0
[ 34.118] (II) Loading extension DRI2
[ 34.118] (II) LoadModule: "fglrx"
[ 34.315] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 35.880] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 35.900] compiled for 1.4.99.906, module version = 8.82.8
[ 35.900] Module class: X.Org Video Driver
[ 35.929] (II) Loading sub module "fglrxdrm"
[ 35.929] (II) LoadModule: "fglrxdrm"
[ 35.929] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 35.963] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 35.963] compiled for 1.4.99.906, module version = 8.82.8
[ 35.963] (II) ATI Proprietary Linux Driver Version Identifier:8.82.8
[ 35.963] (II) ATI Proprietary Linux Driver Release Identifier: 8.821
[ 35.963] (II) ATI Proprietary Linux Driver Build Date: Jan 26 2011 17:20:41
[ 35.964] (++) using VT number 7
[ 35.969] (WW) Falling back to old probe method for fglrx
[ 36.512] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 36.685] (--) Chipset Supported AMD Graphics Processor (0x9612) found
[ 36.687] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:17:0) found
[ 36.687] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:0) found
[ 36.687] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:1) found
[ 36.687] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:2) found
[ 36.687] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:0) found
[ 36.687] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:1) found
[ 36.687] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:2) found
[ 36.687] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:0) found
[ 36.687] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:1) found
[ 36.688] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:2) found
[ 36.688] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:3) found
[ 36.688] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:4) found
[ 36.688] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 1:5:1) found
[ 36.689] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 36.689] (II) AMD Video driver is signed
[ 36.690] (II) fglrx(0): pEnt->device->identifier=0x2409c40
[ 36.690] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 36.691] (II) Loading sub module "vgahw"
[ 36.691] (II) LoadModule: "vgahw"
[ 36.692] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 36.746] (II) Module vgahw: vendor="X.Org Foundation"
[ 36.746] compiled for 1.9.4, module version = 0.1.0
[ 36.746] ABI class: X.Org Video Driver, version 8.0
[ 36.747] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 36.747] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 36.747] (==) fglrx(0): Default visual is TrueColor
[ 36.747] (==) fglrx(0): RGB weight 888
[ 36.747] (II) fglrx(0): Using 8 bits per RGB
[ 36.747] (==) fglrx(0): Buffer Tiling is ON
[ 36.771] (II) Loading sub module "fglrxdrm"
[ 36.771] (II) LoadModule: "fglrxdrm"
[ 36.772] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 36.781] ukiDynamicMajor: found major device number 251
[ 36.782] ukiDynamicMajor: found major device number 251
[ 36.782] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 36.782] ukiOpenDevice: node name is /dev/ati/card0
[ 36.782] ukiOpenDevice: open result is 11, (OK)
[ 36.782] ukiOpenByBusid: ukiOpenMinor returns 11
[ 36.782] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 36.783] (==) fglrx(0): NoAccel = NO
[ 36.783] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 36.783] (--) fglrx(0): Chipset: "ATI Radeon HD 3200 Graphics " (Chipset = 0x9612)
[ 36.783] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30fc)
[ 36.783] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 36.784] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 36.784] (--) fglrx(0): MMIO registers at 0xd2400000
[ 36.784] (--) fglrx(0): I/O port at 0x00007000
[ 36.784] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 36.897] (II) fglrx(0): ATIF platform detected
[ 36.898] (II) fglrx(0): AC Adapter is used
[ 37.236] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 37.311] (II) Loading sub module "vbe"
[ 37.311] (II) LoadModule: "vbe"
[ 37.311] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 37.486] (II) Module vbe: vendor="X.Org Foundation"
[ 37.486] compiled for 1.9.4, module version = 1.1.0
[ 37.486] ABI class: X.Org Video Driver, version 8.0
[ 37.487] (II) fglrx(0): VESA BIOS detected
[ 37.487] (II) fglrx(0): VESA VBE Version 3.0
[ 37.487] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 37.487] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 37.487] (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
[ 37.487] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 37.487] (II) fglrx(0): VESA VBE OEM Product: RS780
[ 37.487] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 37.507] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 37.507] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[ 37.507] (II) fglrx(0): PCIE card detected
[ 37.507] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 37.507] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 37.511] (II) fglrx(0): Using adapter: 1:5.0.
[ 37.520] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 38.015] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[ 38.016] (II) fglrx(0): RandR 1.2 support is enabled!
[ 38.016] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 38.016] (==) fglrx(0): Center Mode is disabled
[ 38.016] (II) Loading sub module "fb"
[ 38.016] (II) LoadModule: "fb"
[ 38.017] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 38.239] (II) Module fb: vendor="X.Org Foundation"
[ 38.239] compiled for 1.9.4, module version = 1.0.0
[ 38.242] ABI class: X.Org ANSI C Emulation, version 0.4
[ 38.242] (II) Loading sub module "ddc"
[ 38.242] (II) LoadModule: "ddc"
[ 38.242] (II) Module "ddc" already built-in
[ 39.043] (II) fglrx(0): Finished Initialize PPLIB!
[ 39.064] (II) fglrx(0): Output LVDS using monitor section 0-LVDS
[ 39.064] (**) fglrx(0): Option "PreferredMode" "1440x900"
[ 39.064] (**) fglrx(0): Option "Position" "0 0"
[ 39.064] (**) fglrx(0): Option "Disable" "false"
[ 39.064] (**) fglrx(0): Option "Rotate" "normal"
[ 39.065] (**) fglrx(0): Option "TargetRefresh" "60"
[ 39.065] (II) fglrx(0): Output DFP1 has no monitor section
[ 39.065] (II) fglrx(0): Output CRT1 using monitor section 0-CRT1
[ 39.065] (**) fglrx(0): Option "Position" "0 0"
[ 39.065] (**) fglrx(0): Option "Disable" "true"
[ 39.065] (**) fglrx(0): Option "Rotate" "normal"
[ 39.065] (**) fglrx(0): Option "TargetRefresh" "60"
[ 39.066] (II) Loading sub module "ddc"
[ 39.066] (II) LoadModule: "ddc"
[ 39.066] (II) Module "ddc" already built-in
[ 39.066] (II) fglrx(0): Connected Display0: LVDS
[ 39.066] (II) fglrx(0): Display0 EDID data ---------------------------
[ 39.066] (II) fglrx(0): Manufacturer: SEC Model: 344b Serial#: 0
[ 39.066] (II) fglrx(0): Year: 2008 Week: 0
[ 39.066] (II) fglrx(0): EDID Version: 1.3
[ 39.067] (II) fglrx(0): Digital Display Input
[ 39.067] (II) fglrx(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 39.067] (II) fglrx(0): Gamma: 2.20
[ 39.067] (II) fglrx(0): No DPMS capabilities specified
[ 39.067] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 39.067] (II) fglrx(0): First detailed timing is preferred mode
[ 39.067] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 39.067] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 39.067] (II) fglrx(0): Manufacturer's mask: 0
[ 39.067] (II) fglrx(0): Supported detailed timing:
[ 39.068] (II) fglrx(0): clock: 96.3 MHz Image Size: 367 x 230 mm
[ 39.068] (II) fglrx(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 39.068] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 39.068] (II) fglrx(0): Unknown vendor-specific block f
[ 39.068] (II) fglrx(0): SAMSUNG
[ 39.068] (II) fglrx(0): 170BT08-G01
[ 39.068] (II) fglrx(0): EDID (in hex):
[ 39.068] (II) fglrx(0): 00ffffffffffff004ca34b3400000000
[ 39.068] (II) fglrx(0): 00120103802517780a87f594574f8c27
[ 39.068] (II) fglrx(0): 27505400000001010101010101010101
[ 39.069] (II) fglrx(0): 0101010101019f25a04051840c304020
[ 39.069] (II) fglrx(0): 33006fe6100000190000000f00000000
[ 39.069] (II) fglrx(0): 000000000078e6022300000000fe0053
[ 39.069] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 39.069] (II) fglrx(0): 00313730425430382d4730310a20004f
[ 39.069] (II) fglrx(0): End of Display0 EDID data --------------------
[ 39.147] (II) fglrx(0): EDID for output LVDS
[ 39.147] (II) fglrx(0): Manufacturer: SEC Model: 344b Serial#: 0
[ 39.147] (II) fglrx(0): Year: 2008 Week: 0
[ 39.147] (II) fglrx(0): EDID Version: 1.3
[ 39.147] (II) fglrx(0): Digital Display Input
[ 39.147] (II) fglrx(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 39.147] (II) fglrx(0): Gamma: 2.20
[ 39.147] (II) fglrx(0): No DPMS capabilities specified
[ 39.147] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 39.147] (II) fglrx(0): First detailed timing is preferred mode
[ 39.147] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 39.147] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 39.147] (II) fglrx(0): Manufacturer's mask: 0
[ 39.147] (II) fglrx(0): Supported detailed timing:
[ 39.147] (II) fglrx(0): clock: 96.3 MHz Image Size: 367 x 230 mm
[ 39.147] (II) fglrx(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 39.147] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 39.147] (II) fglrx(0): Unknown vendor-specific block f
[ 39.147] (II) fglrx(0): SAMSUNG
[ 39.147] (II) fglrx(0): 170BT08-G01
[ 39.147] (II) fglrx(0): EDID (in hex):
[ 39.147] (II) fglrx(0): 00000000000000003a20466972737420
[ 39.147] (II) fglrx(0): 64657461696c65642074696d696e6720
[ 39.148] (II) fglrx(0): 697320707265666572726564206d6f64
[ 39.148] (II) fglrx(0): 650a000a00019f25a04051840c304020
[ 39.148] (II) fglrx(0): 33006fe610000019c100000000000000
[ 39.148] (II) fglrx(0): 98ce15363d00000098ce15363d000000
[ 39.148] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 39.148] (II) fglrx(0): 00313730425430382d4730310a20004f
[ 39.148] (II) fglrx(0): EDID vendor "SEC", prod id 13387
[ 39.148] (II) fglrx(0): Printing DDC gathered Modelines:
[ 39.148] (II) fglrx(0): Modeline "1440x900"x0.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Printing probed modes for output LVDS
[ 39.148] (II) fglrx(0): Modeline "1440x900"x60.0 96.31 1440 1504 1536 1760 900 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "1280x800"x60.0 96.31 1280 1504 1536 1760 800 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "1152x864"x60.0 96.31 1152 1504 1536 1760 864 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "1280x768"x60.0 96.31 1280 1504 1536 1760 768 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "1280x720"x60.0 96.31 1280 1504 1536 1760 720 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "1024x768"x60.0 96.31 1024 1504 1536 1760 768 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "1280x600"x60.0 96.31 1280 1504 1536 1760 600 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "1024x600"x60.0 96.31 1024 1504 1536 1760 600 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "800x600"x60.0 96.31 800 1504 1536 1760 600 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "800x480"x60.0 96.31 800 1504 1536 1760 480 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "720x480"x60.0 96.31 720 1504 1536 1760 480 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): Modeline "640x480"x60.0 96.31 640 1504 1536 1760 480 903 906 912 +hsync +vsync (54.7 kHz)
[ 39.148] (II) fglrx(0): EDID for output DFP1
[ 39.148] (II) fglrx(0): EDID for output CRT1
[ 39.148] (II) fglrx(0): Output LVDS connected
[ 39.148] (II) fglrx(0): Output DFP1 disconnected
[ 39.148] (II) fglrx(0): Output CRT1 disabled by config file
[ 39.148] (II) fglrx(0): Using user preference for initial modes
[ 39.148] (II) fglrx(0): Output LVDS using initial mode 1440x900
[ 39.148] (II) fglrx(0): Display dimensions: (370, 230) mm
[ 39.148] (II) fglrx(0): DPI set to (99, 99)
[ 39.148] (II) fglrx(0): Adapter ATI Radeon HD 3200 Graphics has 2 configurable heads and 1 displays connected.
[ 39.148] (==) fglrx(0): PseudoColor visuals disabled
[ 39.148] (II) Loading sub module "ramdac"
[ 39.148] (II) LoadModule: "ramdac"
[ 39.148] (II) Module "ramdac" already built-in
[ 39.148] (==) fglrx(0): NoDRI = NO
[ 39.148] (==) fglrx(0): Capabilities: 0x00000000
[ 39.149] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 39.149] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 39.149] (==) fglrx(0): UseFastTLS=0
[ 39.149] (==) fglrx(0): BlockSignalsOnLock=1
[ 39.149] (--) Depth 24 pixmap format is 32 bpp
[ 39.149] (II) Loading extension ATIFGLRXDRI
[ 39.149] (II) fglrx(0): doing swlDriScreenInit
[ 39.149] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 39.149] ukiDynamicMajor: found major device number 251
[ 39.149] ukiDynamicMajor: found major device number 251
[ 39.149] ukiDynamicMajor: found major device number 251
[ 39.149] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 39.149] ukiOpenDevice: node name is /dev/ati/card0
[ 39.149] ukiOpenDevice: open result is 16, (OK)
[ 39.149] ukiOpenByBusid: ukiOpenMinor returns 16
[ 39.150] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 39.150] (II) fglrx(0): [uki] DRM interface version 1.0
[ 39.150] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:5:0"
[ 39.150] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 39.150] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fb2e9fb6000
[ 39.150] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 39.150] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 39.150] (II) fglrx(0): swlDriScreenInit done
[ 39.150] (II) fglrx(0): Kernel Module Version Information:
[ 39.150] (II) fglrx(0): Name: fglrx
[ 39.150] (II) fglrx(0): Version: 8.82.8
[ 39.150] (II) fglrx(0): Date: Jan 26 2011
[ 39.150] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 39.150] (II) fglrx(0): Kernel Module version matches driver.
[ 39.150] (II) fglrx(0): Kernel Module Build Time Information:
[ 39.150] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.37-1-amd64
[ 39.150] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 39.150] (II) fglrx(0): Build-Kernel __SMP__: no
[ 39.150] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 39.150] (II) fglrx(0): [uki] register handle = 0x00004000
[ 39.202] (II) fglrx(0): DRI initialization successfull
[ 39.202] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
[ 39.240] (==) fglrx(0): Backing store disabled
[ 39.241] (II) Loading extension FGLRXEXTENSION
[ 39.241] (==) fglrx(0): DPMS enabled
[ 39.242] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 39.243] (**) fglrx(0): Textured Video is enabled.
[ 39.243] (II) LoadModule: "glesx"
[ 39.243] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 39.781] (II) Module glesx: vendor="X.Org Foundation"
[ 39.781] compiled for 1.4.99.906, module version = 1.0.0
[ 39.781] (II) Loading extension GLESX
[ 39.781] (II) fglrx(0): GLESX enableFlags = 528
[ 39.782] (II) fglrx(0): GLESX is enabled
[ 39.782] (II) LoadModule: "amdxmm"
[ 39.783] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 39.811] (II) Module amdxmm: vendor="X.Org Foundation"
[ 39.811] compiled for 1.4.99.906, module version = 2.0.0
[ 39.812] (II) Loading extension AMDXVOPL
[ 39.812] (II) Loading extension AMDXVBA
[ 39.853] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 39.861] (II) fglrx(0): Enable composite support successfully
[ 39.890] (II) fglrx(0): X context handle = 0x1
[ 39.890] (II) fglrx(0): [DRI] installation complete
[ 39.890] (==) fglrx(0): Silken mouse enabled
[ 39.891] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 39.892] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 39.892] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 39.892] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 39.899] (WW) fglrx(0): Unknown ConnectorType: 0!
[ 39.903] (II) fglrx(0): User Preference Output LVDS using refresh rate 60.0 Hz.
[ 40.428] (--) RandR disabled
[ 40.428] (II) Initializing built-in extension Generic Event Extension
[ 40.428] (II) Initializing built-in extension SHAPE
[ 40.428] (II) Initializing built-in extension MIT-SHM
[ 40.428] (II) Initializing built-in extension XInputExtension
[ 40.429] (II) Initializing built-in extension XTEST
[ 40.429] (II) Initializing built-in extension BIG-REQUESTS
[ 40.429] (II) Initializing built-in extension SYNC
[ 40.429] (II) Initializing built-in extension XKEYBOARD
[ 40.429] (II) Initializing built-in extension XC-MISC
[ 40.429] (II) Initializing built-in extension XINERAMA
[ 40.429] (II) Initializing built-in extension XFIXES
[ 40.429] (II) Initializing built-in extension RENDER
[ 40.429] (II) Initializing built-in extension RANDR
[ 40.429] (II) Initializing built-in extension COMPOSITE
[ 40.429] (II) Initializing built-in extension DAMAGE
[ 40.429] (II) SELinux: Disabled on system
[ 40.432] ukiDynamicMajor: found major device number 251
[ 40.432] ukiDynamicMajor: found major device number 251
[ 40.432] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 40.432] ukiOpenDevice: node name is /dev/ati/card0
[ 40.432] ukiOpenDevice: open result is 17, (OK)
[ 40.432] ukiOpenByBusid: ukiOpenMinor returns 17
[ 40.432] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 48.710] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 49.941] (II) fglrx(0): Enable the clock gating!
[ 49.941] (II) fglrx(0): Setting screen physical size to 381 x 238
[ 52.604] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 52.604] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 52.604] (II) LoadModule: "evdev"
[ 52.605] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 52.746] (II) Module evdev: vendor="X.Org Foundation"
[ 52.746] compiled for 1.9.4, module version = 2.6.0
[ 52.746] Module class: X.Org XInput Driver
[ 52.746] ABI class: X.Org XInput driver, version 11.0
[ 52.746] (**) Power Button: always reports core events
[ 52.746] (**) Power Button: Device: "/dev/input/event4"
[ 52.752] (--) Power Button: Found keys
[ 52.752] (II) Power Button: Configuring as keyboard
[ 52.752] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 52.752] (**) Option "xkb_rules" "evdev"
[ 52.752] (**) Option "xkb_model" "hpdv5"
[ 52.752] (**) Option "xkb_layout" "us"
[ 52.753] (**) Option "xkb_options" "lv3:ralt_switch"
[ 53.607] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 53.607] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 53.607] (**) Video Bus: always reports core events
[ 53.607] (**) Video Bus: Device: "/dev/input/event5"
[ 53.616] (--) Video Bus: Found keys
[ 53.616] (II) Video Bus: Configuring as keyboard
[ 53.616] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 53.616] (**) Option "xkb_rules" "evdev"
[ 53.616] (**) Option "xkb_model" "hpdv5"
[ 53.616] (**) Option "xkb_layout" "us"
[ 53.616] (**) Option "xkb_options" "lv3:ralt_switch"
[ 53.790] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 53.790] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 53.790] (**) Power Button: always reports core events
[ 53.790] (**) Power Button: Device: "/dev/input/event2"
[ 53.796] (--) Power Button: Found keys
[ 53.796] (II) Power Button: Configuring as keyboard
[ 53.796] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 53.796] (**) Option "xkb_rules" "evdev"
[ 53.796] (**) Option "xkb_model" "hpdv5"
[ 53.796] (**) Option "xkb_layout" "us"
[ 53.796] (**) Option "xkb_options" "lv3:ralt_switch"
[ 53.799] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 53.799] (II) No input driver/identifier specified (ignoring)
[ 53.820] (II) config/udev: Adding input device HP Webcam (/dev/input/event10)
[ 53.820] (**) HP Webcam : Applying InputClass "evdev keyboard catchall"
[ 53.820] (**) HP Webcam : always reports core events
[ 53.820] (**) HP Webcam : Device: "/dev/input/event10"
[ 53.828] (--) HP Webcam : Found keys
[ 53.828] (II) HP Webcam : Configuring as keyboard
[ 53.828] (II) XINPUT: Adding extended input device "HP Webcam " (type: KEYBOARD)
[ 53.828] (**) Option "xkb_rules" "evdev"
[ 53.829] (**) Option "xkb_model" "hpdv5"
[ 53.829] (**) Option "xkb_layout" "us"
[ 53.829] (**) Option "xkb_options" "lv3:ralt_switch"
[ 53.839] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 53.839] (II) No input driver/identifier specified (ignoring)
[ 53.841] (II) config/udev: Adding input device HDA ATI SB Mic at Ext Front Jack (/dev/input/event12)
[ 53.841] (II) No input driver/identifier specified (ignoring)
[ 53.841] (II) config/udev: Adding input device HDA ATI SB HP Out at Ext Front Jack (/dev/input/event13)
[ 53.841] (II) No input driver/identifier specified (ignoring)
[ 53.843] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 53.843] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 53.843] (**) AT Translated Set 2 keyboard: always reports core events
[ 53.843] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 53.852] (--) AT Translated Set 2 keyboard: Found keys
[ 53.852] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 53.852] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 53.852] (**) Option "xkb_rules" "evdev"
[ 53.853] (**) Option "xkb_model" "hpdv5"
[ 53.853] (**) Option "xkb_layout" "us"
[ 53.853] (**) Option "xkb_options" "lv3:ralt_switch"
[ 53.856] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 53.856] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 53.856] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 53.856] (II) LoadModule: "synaptics"
[ 53.857] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 54.005] (II) Module synaptics: vendor="X.Org Foundation"
[ 54.005] compiled for 1.9.4, module version = 1.3.99
[ 54.005] Module class: X.Org XInput Driver
[ 54.005] ABI class: X.Org XInput driver, version 11.0
[ 54.005] (**) Option "Device" "/dev/input/event7"
[ 54.068] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5608
[ 54.068] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4638
[ 54.068] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 54.068] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 54.068] (--) SynPS/2 Synaptics TouchPad: buttons: left right
[ 54.069] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 54.069] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 54.069] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 54.069] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 54.070] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 54.070] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 54.070] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 54.070] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 54.070] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 54.070] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 54.072] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 54.074] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 54.074] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 54.074] (**) Option "Device" "/dev/input/mouse0"
[ 54.074] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range. defaulting to 1615 - 5685
[ 54.074] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range. defaulting to 1729 - 4171
[ 54.074] (--) SynPS/2 Synaptics TouchPad: invalid pressure range. defaulting to 0 - 256
[ 54.074] (--) SynPS/2 Synaptics TouchPad: invalid finger width range. defaulting to 0 - 16
[ 54.095] (EE) Query no Synaptics: 6003C8
[ 54.095] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 54.095] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 54.096] (EE) PreInit returned NULL for "SynPS/2 Synaptics TouchPad"
[ 54.098] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
[ 54.098] (II) No input driver/identifier specified (ignoring)
[ 54.099] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 54.099] (II) No input driver/identifier specified (ignoring)
[ 54.100] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 54.101] (II) No input driver/identifier specified (ignoring)
[ 54.106] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14)
[ 54.107] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 54.107] (**) ACPI Virtual Keyboard Device: always reports core events
[ 54.107] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
[ 54.107] (--) ACPI Virtual Keyboard Device: Found keys
[ 54.107] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 54.107] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[ 54.107] (**) Option "xkb_rules" "evdev"
[ 54.107] (**) Option "xkb_model" "hpdv5"
[ 54.107] (**) Option "xkb_layout" "us"
[ 54.108] (**) Option "xkb_options" "lv3:ralt_switch"
[ 54.110] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[ 54.110] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 54.110] (**) HP WMI hotkeys: always reports core events
[ 54.110] (**) HP WMI hotkeys: Device: "/dev/input/event6"
[ 54.111] (--) HP WMI hotkeys: Found keys
[ 54.111] (II) HP WMI hotkeys: Configuring as keyboard
[ 54.111] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 54.111] (**) Option "xkb_rules" "evdev"
[ 54.111] (**) Option "xkb_model" "hpdv5"
[ 54.111] (**) Option "xkb_layout" "us"
[ 54.111] (**) Option "xkb_options" "lv3:ralt_switch"
[ 54.114] (II) config/udev: Adding input device ENE eHome Infrared Remote Receiver (/dev/input/event9)
[ 54.114] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "evdev keyboard catchall"
[ 54.114] (**) ENE eHome Infrared Remote Receiver: always reports core events
[ 54.114] (**) ENE eHome Infrared Remote Receiver: Device: "/dev/input/event9"
[ 54.114] (--) ENE eHome Infrared Remote Receiver: Found keys
[ 54.114] (II) ENE eHome Infrared Remote Receiver: Configuring as keyboard
[ 54.114] (II) XINPUT: Adding extended input device "ENE eHome Infrared Remote Receiver" (type: KEYBOARD)
[ 54.114] (**) Option "xkb_rules" "evdev"
[ 54.114] (**) Option "xkb_model" "hpdv5"
[ 54.114] (**) Option "xkb_layout" "us"
[ 54.115] (**) Option "xkb_options" "lv3:ralt_switch"
[ 54.159] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 89.320] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 (/dev/input/mouse1)
[ 89.320] (II) No input driver/identifier specified (ignoring)
[ 89.320] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 (/dev/input/event15)
[ 89.320] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: Applying InputClass "evdev pointer catchall"
[ 89.320] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: always reports core events
[ 89.320] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: Device: "/dev/input/event15"
[ 89.332] (--) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found 9 mouse buttons
[ 89.332] (--) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found scroll wheel(s)
[ 89.332] (--) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found relative axes
[ 89.332] (--) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found x and y relative axes
[ 89.332] (II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Configuring as mouse
[ 89.332] (II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Adding scrollwheel support
[ 89.332] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: YAxisMapping: buttons 4 and 5
[ 89.332] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 89.332] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00" (type: MOUSE)
[ 89.332] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) keeping acceleration scheme 1
[ 89.332] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration profile 0
[ 89.332] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration factor: 2.000
[ 89.332] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration threshold: 4
[ 89.332] (II) Microsoft Microsoft Wireless Optical Mouse® 1.00: initialized for relative axes.
[ 121.057] (II) fglrx(0): EDID vendor "SEC", prod id 13387
[ 121.058] (II) fglrx(0): Printing DDC gathered Modelines:
[ 121.058] (II) fglrx(0): Modeline "1440x900"x0.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz)
[ 121.965] (II) fglrx(0): EDID vendor "SEC", prod id 13387
[ 121.965] (II) fglrx(0): Printing DDC gathered Modelines:
[ 121.965] (II) fglrx(0): Modeline "1440x900"x0.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz)
[ 150.282] (II) fglrx(0): EDID vendor "SEC", prod id 13387
[ 150.282] (II) fglrx(0): Printing DDC gathered Modelines:
[ 150.282] (II) fglrx(0): Modeline "1440x900"x0.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz)
[ 16047.330] (II) fglrx(0): EDID vendor "SEC", prod id 13387
[ 16047.355] (II) fglrx(0): Printing DDC gathered Modelines:
[ 16047.355] (II) fglrx(0): Modeline "1440x900"x0.0 96.31 1440 1504 1536 1760 900 903 906 912 -hsync -vsync (54.7 kHz)
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.37-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages fglrx-glx depends on:
ii fglrx-driver 1:11-2-1 non-free ATI/AMD RadeonHD display
ii libc6 2.11.2-11+pb1 Embedded GNU C Library: Shared lib
ii libxext6 2:1.2.0-2+pb1 X11 miscellaneous extension librar
fglrx-glx recommends no packages.
fglrx-glx suggests no packages.
-- no debconf information
More information about the Pkg-fglrx-devel
mailing list