[Pkg-fglrx-devel] Bug#649280: fglrx-driver: KDE and other apps trigger X restart/system lockup
Alex DEKKER
bugs at ale.cx
Sat Nov 19 14:41:36 UTC 2011
Package: fglrx-driver
Version: 1:11-11-2
Severity: important
Dear Maintainer,
* What led up to the situation?
Log in via KDM to Openbox session. Start Konsole. Konsole window appears briefly, X restarts, back to login screen.
Log in via KDM to KDE session. Splash screen completes, desktop appears, applications start appearing, X restarts, back to login screen. In both cases, Xorg.0.log indicates a segfault in X.
Log in via KDM to Openbox session. Start either amdcccle or Kopete. Application window appears, X locks up. System stops responding to ping. Alt+SysRq ineffective, power cycle required.
Previous versions of the fglrx driver have not exhibited this behaviour. Using X with xserver-xorg-video-radeon does not exhibit this behaviour.
-- Package-specific info:
VGA-compatible devices on PCI bus:
10:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02)
12:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series]
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.807605] PCI-DMA: Disabling AGP.
[ 0.812270] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.116378] Linux agpgart interface v0.103
[ 6.374956] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 6.458701] [fglrx] Maximum main memory to use for locked dma buffers: 3804 MBytes.
[ 6.458814] [fglrx] vendor: 1002 device: 68be count: 1
[ 6.459306] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 6.459984] [fglrx] Kernel PAT support is enabled
[ 6.460025] [fglrx] module loaded - fglrx 8.91.4 [Oct 25 2011] with 1 minors
[ 23.060904] fglrx_pci 0000:12:00.0: irq 48 for MSI/MSI-X
[ 23.061715] [fglrx] Firegl kernel thread PID: 2425
[ 23.061823] [fglrx] Firegl kernel thread PID: 2426
[ 23.061884] [fglrx] Firegl kernel thread PID: 2427
[ 23.062033] [fglrx] IRQ 48 Enabled
[ 23.595559] [fglrx] Gart USWC size:1240 M.
[ 23.595564] [fglrx] Gart cacheable size:491 M.
[ 23.595570] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 23.595573] [fglrx] Reserved FB block: Unshared offset:f91d000, size:3e3000
[ 23.595576] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1032 Nov 19 14:11 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "Default Screen" 0 0
EndSection
Section "Files"
FontPath "tcp/westogre:7100"
EndSection
Section "Module"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "en_uk"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Monitor"
#Option "DPMS"
Identifier "Dell P1110"
HorizSync 30.0 - 95.0
VertRefresh 60.0 - 90.0
Option "DPMS" "true"
EndSection
Section "Device"
# Driver "vesa"
Identifier "ATI HD5750"
Driver "fglrx"
BusID "PCI:18:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI HD5750"
Monitor "Samsung SM2443BW"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1200"
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 35103 Nov 19 14:17 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 21.102]
X.Org X Server 1.11.1.902 (1.11.2 RC 2)
Release Date: 2011-10-28
[ 21.114] X Protocol Version 11, Revision 0
[ 21.114] Build Operating System: Linux 3.1.0-rc4-amd64 x86_64 Debian
[ 21.114] Current Operating System: Linux binky 3.1.0-1-amd64 #1 SMP Mon Nov 14 08:02:25 UTC 2011 x86_64
[ 21.114] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=ade963df-04b7-4718-9ebb-32184e6b6f44 ro quiet
[ 21.114] Build Date: 02 November 2011 10:15:50AM
[ 21.115] xorg-server 2:1.11.1.902-1 (Cyril Brulebois <kibi at debian.org>)
[ 21.115] Current version of pixman: 0.24.0
[ 21.115] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.115] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.115] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 19 14:17:52 2011
[ 21.143] (==) Using config file: "/etc/X11/xorg.conf"
[ 21.143] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.237] (==) ServerLayout "aticonfig Layout"
[ 21.237] (**) |-->Screen "Default Screen" (0)
[ 21.237] (**) | |-->Monitor "<default monitor>"
[ 21.238] (**) | |-->Device "ATI HD5750"
[ 21.238] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 21.238] (==) Automatically adding devices
[ 21.238] (==) Automatically enabling devices
[ 21.267] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 21.267] Entry deleted from font path.
[ 21.334] (**) FontPath set to:
tcp/westogre:7100,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 21.334] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.334] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.334] (II) Loader magic: 0x7f27881fbae0
[ 21.334] (II) Module ABI versions:
[ 21.334] X.Org ANSI C Emulation: 0.4
[ 21.334] X.Org Video Driver: 11.0
[ 21.334] X.Org XInput driver : 13.0
[ 21.334] X.Org Server Extension : 6.0
[ 21.335] (--) PCI: (0:16:0:0) 102b:0522:103c:31fa rev 2, Mem @ 0xbf000000/16777216, 0xfddfc000/16384, 0xfd000000/8388608, BIOS @ 0x????????/65536
[ 21.335] (--) PCI:*(0:18:0:0) 1002:68be:174b:e138 rev 0, Mem @ 0xc0000000/268435456, 0xfdfe0000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 21.335] (II) Open ACPI successful (/var/run/acpid.socket)
[ 21.335] (II) "extmod" will be loaded by default.
[ 21.335] (II) "dbe" will be loaded by default.
[ 21.335] (II) "glx" will be loaded by default.
[ 21.335] (II) "record" will be loaded by default.
[ 21.335] (II) "dri" will be loaded by default.
[ 21.335] (II) "dri2" will be loaded by default.
[ 21.335] (II) LoadModule: "extmod"
[ 21.396] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 21.404] (II) Module extmod: vendor="X.Org Foundation"
[ 21.404] compiled for 1.11.1.902, module version = 1.0.0
[ 21.404] Module class: X.Org Server Extension
[ 21.404] ABI class: X.Org Server Extension, version 6.0
[ 21.404] (II) Loading extension SELinux
[ 21.404] (II) Loading extension MIT-SCREEN-SAVER
[ 21.404] (II) Loading extension XFree86-VidModeExtension
[ 21.404] (II) Loading extension XFree86-DGA
[ 21.404] (II) Loading extension DPMS
[ 21.404] (II) Loading extension XVideo
[ 21.404] (II) Loading extension XVideo-MotionCompensation
[ 21.405] (II) Loading extension X-Resource
[ 21.405] (II) LoadModule: "dbe"
[ 21.405] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 21.408] (II) Module dbe: vendor="X.Org Foundation"
[ 21.408] compiled for 1.11.1.902, module version = 1.0.0
[ 21.408] Module class: X.Org Server Extension
[ 21.408] ABI class: X.Org Server Extension, version 6.0
[ 21.408] (II) Loading extension DOUBLE-BUFFER
[ 21.408] (II) LoadModule: "glx"
[ 21.409] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 21.516] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 21.561] compiled for 6.9.0, module version = 1.0.0
[ 21.562] (II) Loading extension GLX
[ 21.562] (II) LoadModule: "record"
[ 21.562] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 21.562] (II) Module record: vendor="X.Org Foundation"
[ 21.562] compiled for 1.11.1.902, module version = 1.13.0
[ 21.562] Module class: X.Org Server Extension
[ 21.562] ABI class: X.Org Server Extension, version 6.0
[ 21.562] (II) Loading extension RECORD
[ 21.562] (II) LoadModule: "dri"
[ 21.562] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 21.584] (II) Module dri: vendor="X.Org Foundation"
[ 21.584] compiled for 1.11.1.902, module version = 1.0.0
[ 21.584] ABI class: X.Org Server Extension, version 6.0
[ 21.585] (II) Loading extension XFree86-DRI
[ 21.585] (II) LoadModule: "dri2"
[ 21.585] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 21.585] (II) Module dri2: vendor="X.Org Foundation"
[ 21.585] compiled for 1.11.1.902, module version = 1.2.0
[ 21.585] ABI class: X.Org Server Extension, version 6.0
[ 21.585] (II) Loading extension DRI2
[ 21.585] (II) LoadModule: "fglrx"
[ 21.618] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 22.355] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 22.371] compiled for 1.4.99.906, module version = 8.91.4
[ 22.371] Module class: X.Org Video Driver
[ 22.372] (II) Loading sub module "fglrxdrm"
[ 22.372] (II) LoadModule: "fglrxdrm"
[ 22.373] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22.428] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 22.428] compiled for 1.4.99.906, module version = 8.91.4
[ 22.444] (II) ATI Proprietary Linux Driver Version Identifier:8.91.4
[ 22.444] (II) ATI Proprietary Linux Driver Release Identifier: 8.911
[ 22.444] (II) ATI Proprietary Linux Driver Build Date: Oct 25 2011 21:24:13
[ 22.444] (++) using VT number 7
[ 22.449] (WW) Falling back to old probe method for fglrx
[ 22.529] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 22.712] (--) Chipset Supported AMD Graphics Processor (0x68BE) found
[ 22.722] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 18:0:1) found
[ 22.722] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 22.723] (II) AMD Video driver is signed
[ 22.723] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 22.723] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22.723] (II) fglrx(0): pEnt->device->identifier=0x7f27884426e0
[ 22.723] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 22.724] (II) Loading sub module "vgahw"
[ 22.724] (II) LoadModule: "vgahw"
[ 22.729] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 22.750] (II) Module vgahw: vendor="X.Org Foundation"
[ 22.750] compiled for 1.11.1.902, module version = 0.1.0
[ 22.750] ABI class: X.Org Video Driver, version 11.0
[ 22.750] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 22.750] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 22.750] (==) fglrx(0): Default visual is TrueColor
[ 22.750] (==) fglrx(0): RGB weight 888
[ 22.750] (II) fglrx(0): Using 8 bits per RGB
[ 22.750] (==) fglrx(0): Buffer Tiling is ON
[ 22.771] (II) Loading sub module "fglrxdrm"
[ 22.771] (II) LoadModule: "fglrxdrm"
[ 22.771] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22.771] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 22.771] compiled for 1.4.99.906, module version = 8.91.4
[ 22.773] ukiDynamicMajor: found major device number 251
[ 22.773] ukiDynamicMajor: found major device number 251
[ 22.773] ukiOpenByBusid: Searching for BusID PCI:18:0:0
[ 22.773] ukiOpenDevice: node name is /dev/ati/card0
[ 22.774] ukiOpenDevice: open result is 12, (OK)
[ 22.774] ukiOpenByBusid: ukiOpenMinor returns 12
[ 22.774] ukiOpenByBusid: ukiGetBusid reports PCI:18:0:0
[ 22.774] (==) fglrx(0): NoAccel = NO
[ 22.774] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 22.774] (--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series " (Chipset = 0x68be)
[ 22.774] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe138)
[ 22.774] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 22.774] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 22.774] (--) fglrx(0): MMIO registers at 0xfdfe0000
[ 22.774] (--) fglrx(0): I/O port at 0x0000e000
[ 22.774] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 22.791] (II) fglrx(0): AC Adapter is used
[ 22.861] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 22.944] (II) Loading sub module "vbe"
[ 22.944] (II) LoadModule: "vbe"
[ 22.945] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 22.945] (II) Module vbe: vendor="X.Org Foundation"
[ 22.945] compiled for 1.11.1.902, module version = 1.1.0
[ 22.945] ABI class: X.Org Video Driver, version 11.0
[ 22.946] (II) fglrx(0): VESA BIOS detected
[ 22.946] (II) fglrx(0): VESA VBE Version 3.0
[ 22.946] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 22.946] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 22.946] (II) fglrx(0): VESA VBE OEM Software Rev: 12.13
[ 22.946] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 22.946] (II) fglrx(0): VESA VBE OEM Product: JUNIPER
[ 22.946] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 22.978] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 22.978] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 22.978] (II) fglrx(0): PCIE card detected
[ 22.978] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 22.978] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 22.983] (II) fglrx(0): Using adapter: 18:0.0.
[ 23.011] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 23.062] (II) fglrx(0): Interrupt handler installed at IRQ 48.
[ 23.062] (II) fglrx(0): RandR 1.2 support is enabled!
[ 23.062] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 23.062] (==) fglrx(0): Center Mode is disabled
[ 23.062] (II) Loading sub module "fb"
[ 23.062] (II) LoadModule: "fb"
[ 23.083] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.094] (II) Module fb: vendor="X.Org Foundation"
[ 23.094] compiled for 1.11.1.902, module version = 1.0.0
[ 23.094] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.094] (II) Loading sub module "ddc"
[ 23.094] (II) LoadModule: "ddc"
[ 23.094] (II) Module "ddc" already built-in
[ 23.537] (II) fglrx(0): Finished Initialize PPLIB!
[ 23.570] (II) fglrx(0): Output DFP1 has no monitor section
[ 23.570] (II) fglrx(0): Output DFP2 has no monitor section
[ 23.570] (II) fglrx(0): Output DFP3 has no monitor section
[ 23.570] (II) fglrx(0): Output DFP4 has no monitor section
[ 23.570] (II) fglrx(0): Output CRT1 has no monitor section
[ 23.570] (II) fglrx(0): Output CRT2 has no monitor section
[ 23.570] (II) Loading sub module "ddc"
[ 23.570] (II) LoadModule: "ddc"
[ 23.570] (II) Module "ddc" already built-in
[ 23.570] (II) fglrx(0): Connected Display0: DFP4
[ 23.570] (II) fglrx(0): Display0 EDID data ---------------------------
[ 23.570] (II) fglrx(0): Manufacturer: SAM Model: 43f Serial#: 1297691188
[ 23.570] (II) fglrx(0): Year: 2009 Week: 17
[ 23.570] (II) fglrx(0): EDID Version: 1.3
[ 23.570] (II) fglrx(0): Digital Display Input
[ 23.570] (II) fglrx(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 23.570] (II) fglrx(0): Gamma: 2.20
[ 23.570] (II) fglrx(0): DPMS capabilities: Off
[ 23.570] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23.570] (II) fglrx(0): First detailed timing is preferred mode
[ 23.570] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 23.570] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 23.570] (II) fglrx(0): Supported established timings:
[ 23.571] (II) fglrx(0): 640x480 at 60Hz
[ 23.571] (II) fglrx(0): 800x600 at 56Hz
[ 23.571] (II) fglrx(0): 800x600 at 60Hz
[ 23.571] (II) fglrx(0): 1024x768 at 60Hz
[ 23.571] (II) fglrx(0): Manufacturer's mask: 0
[ 23.571] (II) fglrx(0): Supported standard timings:
[ 23.571] (II) fglrx(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 23.571] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 23.571] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 23.571] (II) fglrx(0): Supported detailed timing:
[ 23.571] (II) fglrx(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 23.571] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 23.571] (II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 23.571] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 23.571] (II) fglrx(0): Monitor name: SyncMaster
[ 23.571] (II) fglrx(0): Serial No: H9XS406687
[ 23.571] (II) fglrx(0): EDID (in hex):
[ 23.571] (II) fglrx(0): 00ffffffffffff004c2d3f043432594d
[ 23.571] (II) fglrx(0): 11130103803420782aee91a3544c9926
[ 23.571] (II) fglrx(0): 0f5054230800a9408180814001010101
[ 23.571] (II) fglrx(0): 010101010101283c80a070b023403020
[ 23.571] (II) fglrx(0): 360006442100001a000000fd00383c1e
[ 23.571] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 23.571] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 23.571] (II) fglrx(0): 00483958533430363638370a202000bc
[ 23.571] (II) fglrx(0): End of Display0 EDID data --------------------
[ 23.572] (II) fglrx(0): EDID for output DFP1
[ 23.572] (II) fglrx(0): EDID for output DFP2
[ 23.572] (II) fglrx(0): EDID for output DFP3
[ 23.572] (II) fglrx(0): EDID for output DFP4
[ 23.572] (II) fglrx(0): Manufacturer: SAM Model: 43f Serial#: 1297691188
[ 23.572] (II) fglrx(0): Year: 2009 Week: 17
[ 23.572] (II) fglrx(0): EDID Version: 1.3
[ 23.572] (II) fglrx(0): Digital Display Input
[ 23.572] (II) fglrx(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 23.572] (II) fglrx(0): Gamma: 2.20
[ 23.572] (II) fglrx(0): DPMS capabilities: Off
[ 23.572] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23.572] (II) fglrx(0): First detailed timing is preferred mode
[ 23.572] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 23.572] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 23.572] (II) fglrx(0): Supported established timings:
[ 23.572] (II) fglrx(0): 640x480 at 60Hz
[ 23.572] (II) fglrx(0): 800x600 at 56Hz
[ 23.572] (II) fglrx(0): 800x600 at 60Hz
[ 23.572] (II) fglrx(0): 1024x768 at 60Hz
[ 23.572] (II) fglrx(0): Manufacturer's mask: 0
[ 23.572] (II) fglrx(0): Supported standard timings:
[ 23.572] (II) fglrx(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 23.572] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 23.572] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 23.572] (II) fglrx(0): Supported detailed timing:
[ 23.572] (II) fglrx(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 23.572] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 23.572] (II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 23.572] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 23.572] (II) fglrx(0): Monitor name: SyncMaster
[ 23.572] (II) fglrx(0): Serial No: H9XS406687
[ 23.572] (II) fglrx(0): EDID (in hex):
[ 23.572] (II) fglrx(0): 00ffffffffffff004c2d3f043432594d
[ 23.572] (II) fglrx(0): 11130103803420782aee91a3544c9926
[ 23.572] (II) fglrx(0): 0f5054230800a9408180814001010101
[ 23.573] (II) fglrx(0): 010101010101283c80a070b023403020
[ 23.573] (II) fglrx(0): 360006442100001a000000fd00383c1e
[ 23.573] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 23.573] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 23.573] (II) fglrx(0): 00483958533430363638370a202000bc
[ 23.573] (II) fglrx(0): Printing probed modes for output DFP4
[ 23.573] (II) fglrx(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1920x1080"x60.0 154.00 1920 1968 2000 2080 1080 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1680x1050"x60.0 154.00 1680 1968 2000 2080 1050 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1400x1050"x60.0 162.00 1400 1664 1856 2160 1050 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1600x900"x60.0 162.00 1600 1664 1856 2160 900 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1360x1024"x60.0 162.00 1360 1664 1856 2160 1024 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1440x900"x60.0 162.00 1440 1664 1856 2160 900 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.573] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.573] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.573] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.573] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.573] (II) fglrx(0): EDID for output CRT1
[ 23.573] (II) fglrx(0): EDID for output CRT2
[ 23.573] (II) fglrx(0): Output DFP1 disconnected
[ 23.573] (II) fglrx(0): Output DFP2 disconnected
[ 23.573] (II) fglrx(0): Output DFP3 disconnected
[ 23.573] (II) fglrx(0): Output DFP4 connected
[ 23.573] (II) fglrx(0): Output CRT1 disconnected
[ 23.573] (II) fglrx(0): Output CRT2 disconnected
[ 23.573] (II) fglrx(0): Using user preference for initial modes
[ 23.573] (II) fglrx(0): Output DFP4 using initial mode 1920x1200
[ 23.573] (II) fglrx(0): DPI set to (96, 96)
[ 23.573] (II) fglrx(0): Eyefinity capable adapter detected.
[ 23.573] (II) fglrx(0): Adapter ATI Radeon HD 5700 Series has 5 configurable heads and 1 displays connected.
[ 23.573] (==) fglrx(0): PseudoColor visuals disabled
[ 23.573] (II) Loading sub module "ramdac"
[ 23.573] (II) LoadModule: "ramdac"
[ 23.573] (II) Module "ramdac" already built-in
[ 23.573] (==) fglrx(0): NoDRI = NO
[ 23.573] (==) fglrx(0): Capabilities: 0x00000000
[ 23.573] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 23.573] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 23.573] (==) fglrx(0): UseFastTLS=0
[ 23.573] (==) fglrx(0): BlockSignalsOnLock=1
[ 23.594] (--) Depth 24 pixmap format is 32 bpp
[ 23.594] (II) Loading extension ATIFGLRXDRI
[ 23.594] (II) fglrx(0): doing swlDriScreenInit
[ 23.594] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 23.594] ukiDynamicMajor: found major device number 251
[ 23.594] ukiDynamicMajor: found major device number 251
[ 23.594] ukiDynamicMajor: found major device number 251
[ 23.594] ukiOpenByBusid: Searching for BusID PCI:18:0:0
[ 23.595] ukiOpenDevice: node name is /dev/ati/card0
[ 23.595] ukiOpenDevice: open result is 17, (OK)
[ 23.595] ukiOpenByBusid: ukiOpenMinor returns 17
[ 23.595] ukiOpenByBusid: ukiGetBusid reports PCI:18:0:0
[ 23.595] (II) fglrx(0): [uki] DRM interface version 1.0
[ 23.595] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:18:0:0"
[ 23.595] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 23.595] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f2787e03000
[ 23.595] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 23.595] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 23.595] (II) fglrx(0): swlDriScreenInit done
[ 23.595] (II) fglrx(0): Kernel Module Version Information:
[ 23.595] (II) fglrx(0): Name: fglrx
[ 23.595] (II) fglrx(0): Version: 8.91.4
[ 23.595] (II) fglrx(0): Date: Oct 25 2011
[ 23.595] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 23.595] (II) fglrx(0): Kernel Module version matches driver.
[ 23.595] (II) fglrx(0): Kernel Module Build Time Information:
[ 23.595] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.1.0-1-amd64
[ 23.595] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 23.595] (II) fglrx(0): Build-Kernel __SMP__: no
[ 23.595] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 23.595] (II) fglrx(0): [uki] register handle = 0x00004000
[ 23.675] (II) fglrx(0): DRI initialization successfull
[ 23.701] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010e0000
[ 23.705] (==) fglrx(0): Backing store disabled
[ 23.705] (II) Loading extension FGLRXEXTENSION
[ 23.705] (==) fglrx(0): DPMS enabled
[ 23.705] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 23.705] (**) fglrx(0): Textured Video is enabled.
[ 23.705] (II) LoadModule: "glesx"
[ 23.705] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 23.854] (II) Module glesx: vendor="X.Org Foundation"
[ 23.854] compiled for 1.4.99.906, module version = 1.0.0
[ 23.854] (II) Loading extension GLESX
[ 23.854] (II) fglrx(0): GLESX enableFlags = 592
[ 23.855] (II) fglrx(0): GLESX is enabled
[ 23.855] (II) LoadModule: "amdxmm"
[ 23.855] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 23.942] (II) Module amdxmm: vendor="X.Org Foundation"
[ 23.942] compiled for 1.4.99.906, module version = 2.0.0
[ 23.964] (II) Loading extension AMDXVOPL
[ 23.964] (II) Loading extension AMDXVBA
[ 23.964] [- XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange
[ 24.000] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 24.003] (II) fglrx(0): Enable composite support successfully
[ 24.003] (II) fglrx(0): X context handle = 0x1
[ 24.003] (II) fglrx(0): [DRI] installation complete
[ 24.004] (==) fglrx(0): Silken mouse enabled
[ 24.004] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 24.004] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 24.175] (--) RandR disabled
[ 24.175] (II) Initializing built-in extension Generic Event Extension
[ 24.175] (II) Initializing built-in extension SHAPE
[ 24.175] (II) Initializing built-in extension MIT-SHM
[ 24.175] (II) Initializing built-in extension XInputExtension
[ 24.175] (II) Initializing built-in extension XTEST
[ 24.175] (II) Initializing built-in extension BIG-REQUESTS
[ 24.175] (II) Initializing built-in extension SYNC
[ 24.175] (II) Initializing built-in extension XKEYBOARD
[ 24.175] (II) Initializing built-in extension XC-MISC
[ 24.175] (II) Initializing built-in extension SECURITY
[ 24.175] (II) Initializing built-in extension XINERAMA
[ 24.175] (II) Initializing built-in extension XFIXES
[ 24.175] (II) Initializing built-in extension RENDER
[ 24.175] (II) Initializing built-in extension RANDR
[ 24.175] (II) Initializing built-in extension COMPOSITE
[ 24.175] (II) Initializing built-in extension DAMAGE
[ 24.175] (II) SELinux: Disabled on system
[ 24.178] ukiDynamicMajor: found major device number 251
[ 24.178] ukiDynamicMajor: found major device number 251
[ 24.178] ukiOpenByBusid: Searching for BusID PCI:18:0:0
[ 24.178] ukiOpenDevice: node name is /dev/ati/card0
[ 24.178] ukiOpenDevice: open result is 18, (OK)
[ 24.178] ukiOpenByBusid: ukiOpenMinor returns 18
[ 24.178] ukiOpenByBusid: ukiGetBusid reports PCI:18:0:0
[ 26.588] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 26.658] (II) fglrx(0): Enable the clock gating!
[ 26.658] (II) fglrx(0): Setting screen physical size to 508 x 317
[ 27.083] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 27.083] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.083] (II) LoadModule: "evdev"
[ 27.085] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.090] (II) Module evdev: vendor="X.Org Foundation"
[ 27.090] compiled for 1.11.0, module version = 2.6.0
[ 27.090] Module class: X.Org XInput Driver
[ 27.090] ABI class: X.Org XInput driver, version 13.0
[ 27.090] (II) Using input driver 'evdev' for 'Power Button'
[ 27.090] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.090] (**) Power Button: always reports core events
[ 27.090] (**) Power Button: Device: "/dev/input/event5"
[ 27.090] (--) Power Button: Found keys
[ 27.091] (II) Power Button: Configuring as keyboard
[ 27.091] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 27.091] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.091] (**) Option "xkb_rules" "evdev"
[ 27.091] (**) Option "xkb_model" "pc105"
[ 27.091] (**) Option "xkb_layout" "gb"
[ 27.091] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp"
[ 27.145] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 27.145] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.145] (II) Using input driver 'evdev' for 'Power Button'
[ 27.145] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.145] (**) Power Button: always reports core events
[ 27.145] (**) Power Button: Device: "/dev/input/event4"
[ 27.145] (--) Power Button: Found keys
[ 27.145] (II) Power Button: Configuring as keyboard
[ 27.145] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 27.145] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 27.145] (**) Option "xkb_rules" "evdev"
[ 27.145] (**) Option "xkb_model" "pc105"
[ 27.145] (**) Option "xkb_layout" "gb"
[ 27.145] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp"
[ 27.145] (II) config/udev: Adding input device ServerEngines SE USB Device (/dev/input/event2)
[ 27.145] (**) ServerEngines SE USB Device: Applying InputClass "evdev keyboard catchall"
[ 27.145] (II) Using input driver 'evdev' for 'ServerEngines SE USB Device'
[ 27.145] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.145] (**) ServerEngines SE USB Device: always reports core events
[ 27.145] (**) ServerEngines SE USB Device: Device: "/dev/input/event2"
[ 27.145] (--) ServerEngines SE USB Device: Found keys
[ 27.146] (II) ServerEngines SE USB Device: Configuring as keyboard
[ 27.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input2/event2"
[ 27.146] (II) XINPUT: Adding extended input device "ServerEngines SE USB Device" (type: KEYBOARD, id 8)
[ 27.146] (**) Option "xkb_rules" "evdev"
[ 27.146] (**) Option "xkb_model" "pc105"
[ 27.146] (**) Option "xkb_layout" "gb"
[ 27.146] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp"
[ 27.146] (II) config/udev: Adding input device ServerEngines SE USB Device (/dev/input/event3)
[ 27.146] (**) ServerEngines SE USB Device: Applying InputClass "evdev pointer catchall"
[ 27.146] (II) Using input driver 'evdev' for 'ServerEngines SE USB Device'
[ 27.146] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.146] (**) ServerEngines SE USB Device: always reports core events
[ 27.146] (**) ServerEngines SE USB Device: Device: "/dev/input/event3"
[ 27.146] (--) ServerEngines SE USB Device: Found 12 mouse buttons
[ 27.146] (--) ServerEngines SE USB Device: Found scroll wheel(s)
[ 27.146] (--) ServerEngines SE USB Device: Found relative axes
[ 27.146] (--) ServerEngines SE USB Device: Found x and y relative axes
[ 27.146] (II) ServerEngines SE USB Device: Configuring as mouse
[ 27.146] (II) ServerEngines SE USB Device: Adding scrollwheel support
[ 27.146] (**) ServerEngines SE USB Device: YAxisMapping: buttons 4 and 5
[ 27.146] (**) ServerEngines SE USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.1/input/input3/event3"
[ 27.146] (II) XINPUT: Adding extended input device "ServerEngines SE USB Device" (type: MOUSE, id 9)
[ 27.146] (II) ServerEngines SE USB Device: initialized for relative axes.
[ 27.147] (**) ServerEngines SE USB Device: (accel) keeping acceleration scheme 1
[ 27.147] (**) ServerEngines SE USB Device: (accel) acceleration profile 0
[ 27.147] (**) ServerEngines SE USB Device: (accel) acceleration factor: 2.000
[ 27.147] (**) ServerEngines SE USB Device: (accel) acceleration threshold: 4
[ 27.147] (II) config/udev: Adding input device ServerEngines SE USB Device (/dev/input/mouse1)
[ 27.147] (II) No input driver/identifier specified (ignoring)
[ 27.147] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event0)
[ 27.147] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.147] (II) Using input driver 'evdev' for 'CHICONY HP Basic USB Keyboard'
[ 27.148] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.148] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 27.148] (**) CHICONY HP Basic USB Keyboard: Device: "/dev/input/event0"
[ 27.148] (--) CHICONY HP Basic USB Keyboard: Found keys
[ 27.148] (II) CHICONY HP Basic USB Keyboard: Configuring as keyboard
[ 27.148] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input0/event0"
[ 27.148] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD, id 10)
[ 27.148] (**) Option "xkb_rules" "evdev"
[ 27.148] (**) Option "xkb_model" "pc105"
[ 27.148] (**) Option "xkb_layout" "gb"
[ 27.148] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp"
[ 27.148] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 27.148] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 27.148] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 27.148] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.148] (**) Logitech USB Optical Mouse: always reports core events
[ 27.148] (**) Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 27.148] (--) Logitech USB Optical Mouse: Found 3 mouse buttons
[ 27.148] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 27.148] (--) Logitech USB Optical Mouse: Found relative axes
[ 27.148] (--) Logitech USB Optical Mouse: Found x and y relative axes
[ 27.148] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 27.148] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[ 27.148] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 27.148] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.149] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.4/1-1.4:1.0/input/input1/event1"
[ 27.149] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 27.149] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 27.149] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 27.149] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 27.149] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 27.149] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 27.149] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 27.149] (II) No input driver/identifier specified (ignoring)
[ 27.149] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP (/dev/input/event7)
[ 27.149] (II) No input driver/identifier specified (ignoring)
[ 27.150] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 27.150] (II) No input driver/identifier specified (ignoring)
[ 27.150] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event8)
[ 27.150] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 27.150] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 27.150] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.150] (**) ACPI Virtual Keyboard Device: always reports core events
[ 27.150] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event8"
[ 27.150] (--) ACPI Virtual Keyboard Device: Found keys
[ 27.150] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 27.150] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[ 27.150] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12)
[ 27.150] (**) Option "xkb_rules" "evdev"
[ 27.150] (**) Option "xkb_model" "pc105"
[ 27.150] (**) Option "xkb_layout" "gb"
[ 27.150] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp"
[ 27.155] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.1.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages fglrx-driver depends on:
ii glx-alternative-fglrx 0.2.0
ii libc6 2.13-21
ii libfglrx 1:11-11-2
ii libgl1-mesa-glx [libgl1] 7.11-6
ii libx11-6 2:1.4.4-4
ii libxext6 2:1.3.0-3
ii libxrandr2 2:1.3.2-2
ii libxrender1 1:0.9.6-2
ii xserver-xorg-core [xorg-video-abi-11] 2:1.11.1.902-1
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:11-11-2
ii fglrx-glx-ia32 1:11-11-2
ii fglrx-modules-dkms [fglrx-kernel-11-11] 1:11-11-2
ii libgl1-fglrx-glx 1:11-11-2
Versions of packages fglrx-driver suggests:
pn fglrx-control 1:11-11-2
pn xvba-va-driver <none>
-- debconf information:
fglrx-driver/acpi_switch: false
More information about the Pkg-fglrx-devel
mailing list