[Pkg-fglrx-devel] Bug#645625: fglrx-driver: hangs on startx, using X.Org Foundation libglx.so
The Wanderer
wanderer at fastmail.fm
Mon Oct 17 13:32:24 UTC 2011
Package: fglrx-driver
Version: 1:11-9-1
Severity: important
Dear Maintainer,
I am no longer able to get into X using fglrx, under the default as-installed
file layout.
When I run startx, the screen goes blank as normal when switching consoles, then
never comes back again. Attempting to switch back manually, using e.g.
Ctrl-Alt-F2, produces no effect. However, the system does appear to shut down
normally when the power button is pressed.
Attached is a diff between the version of Xorg.0.log from the last successful
launch of X before this problem manifested and a generally representative
version of Xorg.0.log as present on the system after rebooting from a 'startx'
hang, with the timestamps cut out to eliminate false-positive differences.
The apparently significant part of the diff is the fact that the "good" launch
was done using the fglrx version of libglx.so, and the "bad" one was done using
the native X.Org version. (The fglrx driver versions are also different, because
in the interim I had upgraded to unstable in hopes that newer package versions
would have fixed the problem, and unfortunately a "failed" log with matching
driver versions is no longer available.)
/usr/lib/xorg/modules/extensions/libglx.so is apparently provided by
xserver-xorg-core, and (in current package versions) nothing else. In older
but apparently still available package versions, it was (also? instead?)
provided by fglrx-driver.
According to some comments in a recent changelog for fglrx-driver, the libglx.so
compatibility symlink has been removed from that package, at the same time as a
bump to the required version of glx-alternative-fglrx to 0.1.92. I infer from
that comment that possibly glx-alternative-fglrx is supposed to take care of
making sure that the correct libglx.so is used. However, at least on my system
and when using glx-alternative-fglrx version 0.1.94, no such redirection is
made.
Likewise, the description of the 'glx-diversions' package might lead me to
expect that it would handle some aspect of this redirection. Again, however,
this does not appear to be the case.
If I remove my xorg.conf, I can get into X using the RADEON driver, but without
GLX capability. If I also switch my GLX alternative to 'mesa-diverted' instead
of 'fglrx', I can get GLX capability, but with low performance (roughly 1/8th of
what I get with fglrx) and - at least in the case of Minecraft - severe
graphical glitches.
If I restore my xorg.conf, switch my GLX alternative back to 'fglrx', move the
existing libglx.so out of the way, and replace it with a symlink to
/usr/lib/fglrx/fglrx-libglx.so, I can get into X and everything works fine. That
is the configuration under which I am writing this bug report.
The only ways I can see to fix this are to either return to providing libglx.so
via fglrx-driver et al. (either directly or via update-alternatives), or find
some way to modify xorg.conf so that it picks up the correct libglx.so. I have
no idea of how best to do the former, and no good idea of how to do the latter.
If there is anything I can do to help get this fixed, please do not hesitate to
let me know.
-- Package-specific info:
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD
4500/5100 Series]
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.840513] Linux agpgart interface v0.103
[ 6.307162] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 6.443266] [fglrx] Maximum main memory to use for locked dma buffers: 3771
MBytes.
[ 6.443939] [fglrx] vendor: 1002 device: 9553 count: 1
[ 6.444930] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 6.445443] [fglrx] Kernel PAT support is enabled
[ 6.445533] [fglrx] module loaded - fglrx 8.89.4 [Sep 14 2011] with 1 minors
[ 125.062106] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[ 125.062698] [fglrx] Firegl kernel thread PID: 2685
[ 125.062762] [fglrx] Firegl kernel thread PID: 2686
[ 125.062824] [fglrx] Firegl kernel thread PID: 2687
[ 125.062996] [fglrx] IRQ 50 Enabled
[ 125.369248] [fglrx] Gart USWC size:1232 M.
[ 125.369251] [fglrx] Gart cacheable size:487 M.
[ 125.369257] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 125.369259] [fglrx] Reserved FB block: Unshared offset:fc25000, size:3db000
[ 125.369261] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1357 Oct 13 22:19 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
#Section "Monitor"
# Identifier "aticonfig-Monitor[0]-0"
# Option "VendorName" "ATI Proprietary Driver"
# Option "ModelName" "Generic Autodetecting Monitor"
# Option "DPMS" "true"
#EndSection
# EDID version 1 revision 3
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules/extensions"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Monitor"
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
# DPMS capabilities: Active off:no Suspend:no Standby:no
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
Identifier "LGD:6602"
VendorName "LGD"
ModelName "LGD:6602"
ModeLine "1366x768" 69.3 1366 1398 1430 1486 768 770 774 782 -hsync
-vsync
ModeLine "1366x768" 69.3 1366 1398 1430 1486 768 770 774 782 -hsync
-vsync
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
# Monitor "aticonfig-Monitor[0]-0"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "LGD:6602"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 35975 Oct 13 23:32 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 123.469]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 123.470] X Protocol Version 11, Revision 0
[ 123.470] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
[ 123.470] Current Operating System: Linux aqualung 3.0.0-1-amd64 #1 SMP Sat
Aug 27 16:21:11 UTC 2011 x86_64
[ 123.470] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64
root=UUID=f561648f-c790-477a-a08a-a19ad34f5d67 ro
[ 123.470] Build Date: 24 August 2011 08:53:55AM
[ 123.470] xorg-server 2:1.10.4-1 (Cyril Brulebois <kibi at debian.org>)
[ 123.471] Current version of pixman: 0.22.2
[ 123.471] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 123.471] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 123.473] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 13 23:31:53 2011
[ 123.543] (==) Using config file: "/etc/X11/xorg.conf"
[ 123.543] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 123.594] (==) ServerLayout "aticonfig Layout"
[ 123.594] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 123.594] (**) | |-->Monitor "LGD:6602"
[ 123.594] (**) | |-->Device "aticonfig-Device[0]-0"
[ 123.594] (==) Automatically adding devices
[ 123.594] (==) Automatically enabling devices
[ 123.671] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 123.671] Entry deleted from font path.
[ 123.780] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 123.780] (**) ModulePath set to
"/usr/lib/xorg/modules/extensions,/usr/lib/xorg/modules"
[ 123.780] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 123.780] (II) Loader magic: 0x7d8500
[ 123.780] (II) Module ABI versions:
[ 123.780] X.Org ANSI C Emulation: 0.4
[ 123.780] X.Org Video Driver: 10.0
[ 123.780] X.Org XInput driver : 12.2
[ 123.780] X.Org Server Extension : 5.0
[ 123.782] (--) PCI:*(0:1:0:0) 1002:9553:1028:02be rev 0, Mem @
0xd0000000/268435456, 0xfc000000/65536, I/O @ 0x00002000/256, BIOS @
0x????????/131072
[ 123.782] (II) Open ACPI successful (/var/run/acpid.socket)
[ 123.782] (II) "extmod" will be loaded by default.
[ 123.782] (II) "dbe" will be loaded by default.
[ 123.782] (II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
[ 123.782] (II) "record" will be loaded by default.
[ 123.782] (II) "dri" will be loaded by default.
[ 123.782] (II) "dri2" will be loaded by default.
[ 123.782] (II) LoadModule: "glx"
[ 123.782] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 123.823] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 123.824] compiled for 6.9.0, module version = 1.0.0
[ 123.824] (II) Loading extension GLX
[ 123.824] (II) LoadModule: "extmod"
[ 123.825] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 123.851] (II) Module extmod: vendor="X.Org Foundation"
[ 123.851] compiled for 1.10.4, module version = 1.0.0
[ 123.851] Module class: X.Org Server Extension
[ 123.851] ABI class: X.Org Server Extension, version 5.0
[ 123.851] (II) Loading extension SELinux
[ 123.851] (II) Loading extension MIT-SCREEN-SAVER
[ 123.851] (II) Loading extension XFree86-VidModeExtension
[ 123.851] (II) Loading extension XFree86-DGA
[ 123.851] (II) Loading extension DPMS
[ 123.851] (II) Loading extension XVideo
[ 123.851] (II) Loading extension XVideo-MotionCompensation
[ 123.851] (II) Loading extension X-Resource
[ 123.851] (II) LoadModule: "dbe"
[ 123.851] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 123.863] (II) Module dbe: vendor="X.Org Foundation"
[ 123.863] compiled for 1.10.4, module version = 1.0.0
[ 123.863] Module class: X.Org Server Extension
[ 123.863] ABI class: X.Org Server Extension, version 5.0
[ 123.863] (II) Loading extension DOUBLE-BUFFER
[ 123.863] (II) LoadModule: "record"
[ 123.863] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 123.864] (II) Module record: vendor="X.Org Foundation"
[ 123.864] compiled for 1.10.4, module version = 1.13.0
[ 123.864] Module class: X.Org Server Extension
[ 123.864] ABI class: X.Org Server Extension, version 5.0
[ 123.864] (II) Loading extension RECORD
[ 123.864] (II) LoadModule: "dri"
[ 123.864] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 123.876] (II) Module dri: vendor="X.Org Foundation"
[ 123.876] compiled for 1.10.4, module version = 1.0.0
[ 123.876] ABI class: X.Org Server Extension, version 5.0
[ 123.876] (II) Loading extension XFree86-DRI
[ 123.876] (II) LoadModule: "dri2"
[ 123.877] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 123.901] (II) Module dri2: vendor="X.Org Foundation"
[ 123.901] compiled for 1.10.4, module version = 1.2.0
[ 123.901] ABI class: X.Org Server Extension, version 5.0
[ 123.901] (II) Loading extension DRI2
[ 123.901] (II) LoadModule: "fglrx"
[ 123.924] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 124.167] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 124.188] compiled for 1.4.99.906, module version = 8.89.4
[ 124.188] Module class: X.Org Video Driver
[ 124.189] (II) Loading sub module "fglrxdrm"
[ 124.189] (II) LoadModule: "fglrxdrm"
[ 124.189] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 124.232] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 124.232] compiled for 1.4.99.906, module version = 8.89.4
[ 124.232] (II) ATI Proprietary Linux Driver Version Identifier:8.89.4
[ 124.232] (II) ATI Proprietary Linux Driver Release Identifier: 8.892
[ 124.232] (II) ATI Proprietary Linux Driver Build Date: Sep 14 2011 10:36:30
[ 124.232] (--) using VT number 7
[ 124.237] (WW) Falling back to old probe method for fglrx
[ 124.326] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 124.372] (--) Chipset Supported AMD Graphics Processor (0x9553) found
[ 124.391] (WW) fglrx: No matching Device section for instance (BusID
PCI:0 at 1:0:1) found
[ 124.392] (II) AMD Video driver is running on a device belonging to a group
targeted for this release
[ 124.392] (II) AMD Video driver is signed
[ 124.392] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 124.392] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 124.392] (II) fglrx(0): pEnt->device->identifier=0xd389f0
[ 124.392] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 124.392] (II) Loading sub module "vgahw"
[ 124.392] (II) LoadModule: "vgahw"
[ 124.426] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 124.433] (II) Module vgahw: vendor="X.Org Foundation"
[ 124.433] compiled for 1.10.4, module version = 0.1.0
[ 124.434] ABI class: X.Org Video Driver, version 10.0
[ 124.434] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 124.434] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 124.434] (==) fglrx(0): Default visual is TrueColor
[ 124.434] (**) fglrx(0): Option "DPMS" "true"
[ 124.434] (==) fglrx(0): RGB weight 888
[ 124.434] (II) fglrx(0): Using 8 bits per RGB
[ 124.434] (==) fglrx(0): Buffer Tiling is ON
[ 124.450] (II) Loading sub module "fglrxdrm"
[ 124.450] (II) LoadModule: "fglrxdrm"
[ 124.450] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 124.450] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 124.450] compiled for 1.4.99.906, module version = 8.89.4
[ 124.454] ukiDynamicMajor: found major device number 250
[ 124.455] ukiDynamicMajor: found major device number 250
[ 124.455] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 124.455] ukiOpenDevice: node name is /dev/ati/card0
[ 124.455] ukiOpenDevice: open result is 11, (OK)
[ 124.455] ukiOpenByBusid: ukiOpenMinor returns 11
[ 124.455] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 124.455] (==) fglrx(0): NoAccel = NO
[ 124.455] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 124.455] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4500 Series"
(Chipset = 0x9553)
[ 124.455] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x02be)
[ 124.455] (==) fglrx(0): board vendor info: third party graphics adapter -
NOT original ATI
[ 124.455] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 124.456] (--) fglrx(0): MMIO registers at 0xfc000000
[ 124.456] (--) fglrx(0): I/O port at 0x00002000
[ 124.456] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 124.660] (II) fglrx(0): AC Adapter is used
[ 124.714] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 124.800] (II) Loading sub module "vbe"
[ 124.800] (II) LoadModule: "vbe"
[ 124.800] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 124.811] (II) Module vbe: vendor="X.Org Foundation"
[ 124.811] compiled for 1.10.4, module version = 1.1.0
[ 124.811] ABI class: X.Org Video Driver, version 10.0
[ 124.811] (II) fglrx(0): VESA BIOS detected
[ 124.811] (II) fglrx(0): VESA VBE Version 3.0
[ 124.811] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 124.811] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 124.811] (II) fglrx(0): VESA VBE OEM Software Rev: 11.21
[ 124.811] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies
Inc.
[ 124.811] (II) fglrx(0): VESA VBE OEM Product: M92
[ 124.811] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 124.844] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 124.844] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
[ 124.844] (II) fglrx(0): PCIE card detected
[ 124.845] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 124.845] (WW) fglrx(0): board is an unknown third party board, chipset is
supported
[ 124.850] (II) fglrx(0): Using adapter: 1:0.0.
[ 124.878] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize =
0x20000000)
[ 125.063] (II) fglrx(0): Interrupt handler installed at IRQ 50.
[ 125.063] (II) fglrx(0): RandR 1.2 support is enabled!
[ 125.063] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 125.063] (==) fglrx(0): Center Mode is disabled
[ 125.063] (II) Loading sub module "fb"
[ 125.063] (II) LoadModule: "fb"
[ 125.063] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 125.093] (II) Module fb: vendor="X.Org Foundation"
[ 125.093] compiled for 1.10.4, module version = 1.0.0
[ 125.093] ABI class: X.Org ANSI C Emulation, version 0.4
[ 125.093] (II) Loading sub module "ddc"
[ 125.093] (II) LoadModule: "ddc"
[ 125.093] (II) Module "ddc" already built-in
[ 125.300] (II) fglrx(0): Finished Initialize PPLIB!
[ 125.309] (II) fglrx(0): Output LVDS using monitor section LGD:6602
[ 125.309] (II) fglrx(0): Output DFP1 has no monitor section
[ 125.309] (II) fglrx(0): Output CRT1 has no monitor section
[ 125.322] (II) Loading sub module "ddc"
[ 125.322] (II) LoadModule: "ddc"
[ 125.322] (II) Module "ddc" already built-in
[ 125.322] (II) fglrx(0): Connected Display0: LVDS
[ 125.322] (II) fglrx(0): Display0 EDID data ---------------------------
[ 125.322] (II) fglrx(0): Manufacturer: LGD Model: 266 Serial#: 0
[ 125.322] (II) fglrx(0): Year: 2009 Week: 0
[ 125.322] (II) fglrx(0): EDID Version: 1.3
[ 125.322] (II) fglrx(0): Digital Display Input
[ 125.322] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 125.322] (II) fglrx(0): Gamma: 2.20
[ 125.322] (II) fglrx(0): No DPMS capabilities specified
[ 125.322] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 125.322] (II) fglrx(0): First detailed timing is preferred mode
[ 125.322] (II) fglrx(0): redX: 0.607 redY: 0.606 greenX: 0.333 greenY: 0.586
[ 125.322] (II) fglrx(0): blueX: 0.149 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 125.322] (II) fglrx(0): Manufacturer's mask: 0
[ 125.322] (II) fglrx(0): Supported detailed timing:
[ 125.322] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 125.322] (II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1430
h_blank_end 1486 h_border: 0
[ 125.322] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 774
v_blanking: 782 v_border: 0
[ 125.322] (II) fglrx(0): Supported detailed timing:
[ 125.322] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 125.322] (II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1430
h_blank_end 1486 h_border: 0
[ 125.322] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 774
v_blanking: 782 v_border: 0
[ 125.322] (II) fglrx(0): 1K0R2�156WH2
[ 125.322] (II) fglrx(0): Unknown vendor-specific block 0
[ 125.322] (II) fglrx(0): EDID (in hex):
[ 125.322] (II) fglrx(0): 00ffffffffffff0030e4660200000000
[ 125.322] (II) fglrx(0): 00130103802213780a94659b9b559626
[ 125.322] (II) fglrx(0): 0f505400000001010101010101010101
[ 125.322] (II) fglrx(0): 010101010101121b567850000e302020
[ 125.322] (II) fglrx(0): 240058c210000019121b567850000e30
[ 125.322] (II) fglrx(0): 2020240058c210000019000000fe0031
[ 125.322] (II) fglrx(0): 4b305232803135365748320a00000000
[ 125.322] (II) fglrx(0): 00ffffffffffffffff01010a20200070
[ 125.322] (II) fglrx(0): End of Display0 EDID data --------------------
[ 125.350] (II) fglrx(0): EDID for output LVDS
[ 125.350] (II) fglrx(0): Manufacturer: LGD Model: 266 Serial#: 0
[ 125.350] (II) fglrx(0): Year: 2009 Week: 0
[ 125.350] (II) fglrx(0): EDID Version: 1.3
[ 125.350] (II) fglrx(0): Digital Display Input
[ 125.350] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 125.350] (II) fglrx(0): Gamma: 2.20
[ 125.350] (II) fglrx(0): No DPMS capabilities specified
[ 125.350] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 125.350] (II) fglrx(0): First detailed timing is preferred mode
[ 125.350] (II) fglrx(0): redX: 0.607 redY: 0.606 greenX: 0.333 greenY: 0.586
[ 125.351] (II) fglrx(0): blueX: 0.149 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 125.351] (II) fglrx(0): Manufacturer's mask: 0
[ 125.351] (II) fglrx(0): Supported detailed timing:
[ 125.351] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 125.351] (II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1430
h_blank_end 1486 h_border: 0
[ 125.351] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 774
v_blanking: 782 v_border: 0
[ 125.351] (II) fglrx(0): Supported detailed timing:
[ 125.351] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 125.351] (II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1430
h_blank_end 1486 h_border: 0
[ 125.351] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 774
v_blanking: 782 v_border: 0
[ 125.351] (II) fglrx(0): 1K0R2�156WH2
[ 125.351] (II) fglrx(0): Unknown vendor-specific block 0
[ 125.351] (II) fglrx(0): EDID (in hex):
[ 125.351] (II) fglrx(0): 00ffffffffffff0030e4660200000000
[ 125.351] (II) fglrx(0): 00130103802213780a94659b9b559626
[ 125.351] (II) fglrx(0): 0f505400000001010101010101010101
[ 125.351] (II) fglrx(0): 010101010101121b567850000e302020
[ 125.351] (II) fglrx(0): 240058c210000019121b567850000e30
[ 125.351] (II) fglrx(0): 2020240058c210000019000000fe0031
[ 125.351] (II) fglrx(0): 4b305232803135365748320a00000000
[ 125.351] (II) fglrx(0): 00ffffffffffffffff01010a20200070
[ 125.351] (II) fglrx(0): EDID vendor "LGD", prod id 614
[ 125.351] (II) fglrx(0): Printing DDC gathered Modelines:
[ 125.351] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486
768 770 774 782 -hsync -vsync (46.6 kHz)
[ 125.351] (EE) fglrx(0): Add Customize Mode failed: 2
[ 125.351] (EE) fglrx(0): Add Customize Mode failed: 2
[ 125.351] (II) fglrx(0): Not using mode "1366x768" (unknown reason)
[ 125.351] (II) fglrx(0): Not using mode "1366x768" (unknown reason)
[ 125.351] (II) fglrx(0): Printing probed modes for output LVDS
[ 125.351] (II) fglrx(0): Modeline "1366x768"x60.0 69.30 1366 1398 1430
1486 768 770 774 782 +hsync +vsync (46.6 kHz)
[ 125.351] (II) fglrx(0): Modeline "1280x768"x60.0 69.30 1280 1398 1430
1486 768 770 774 782 +hsync +vsync (46.6 kHz)
[ 125.351] (II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1398 1430
1486 720 770 774 782 +hsync +vsync (46.6 kHz)
[ 125.351] (II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1398 1430
1486 768 770 774 782 +hsync +vsync (46.6 kHz)
[ 125.351] (II) fglrx(0): Modeline "1024x600"x60.0 69.30 1024 1398 1430
1486 600 770 774 782 +hsync +vsync (46.6 kHz)
[ 125.351] (II) fglrx(0): Modeline "1024x480"x60.0 69.30 1024 1398 1430
1486 480 770 774 782 +hsync +vsync (46.6 kHz)
[ 125.351] (II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1398 1430 1486
600 770 774 782 +hsync +vsync (46.6 kHz)
[ 125.351] (II) fglrx(0): Modeline "800x480"x60.0 69.30 800 1398 1430 1486
480 770 774 782 +hsync +vsync (46.6 kHz)
[ 125.351] (II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1398 1430 1486
480 770 774 782 +hsync +vsync (46.6 kHz)
[ 125.351] (II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1398 1430 1486
480 770 774 782 +hsync +vsync (46.6 kHz)
[ 125.351] (II) fglrx(0): EDID for output DFP1
[ 125.351] (II) fglrx(0): EDID for output CRT1
[ 125.351] (II) fglrx(0): Output LVDS connected
[ 125.351] (II) fglrx(0): Output DFP1 disconnected
[ 125.351] (II) fglrx(0): Output CRT1 disconnected
[ 125.351] (II) fglrx(0): Using exact sizes for initial modes
[ 125.351] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 125.351] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 125.351] (II) fglrx(0): DPI set to (102, 102)
[ 125.351] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4500 Series has 2
configurable heads and 1 displays connected.
[ 125.351] (==) fglrx(0): PseudoColor visuals disabled
[ 125.351] (II) Loading sub module "ramdac"
[ 125.352] (II) LoadModule: "ramdac"
[ 125.352] (II) Module "ramdac" already built-in
[ 125.352] (==) fglrx(0): NoDRI = NO
[ 125.352] (==) fglrx(0): Capabilities: 0x00000000
[ 125.352] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 125.352] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 125.352] (==) fglrx(0): UseFastTLS=0
[ 125.352] (==) fglrx(0): BlockSignalsOnLock=1
[ 125.368] (--) Depth 24 pixmap format is 32 bpp
[ 125.368] (II) Loading extension ATIFGLRXDRI
[ 125.368] (II) fglrx(0): doing swlDriScreenInit
[ 125.368] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 125.368] ukiDynamicMajor: found major device number 250
[ 125.368] ukiDynamicMajor: found major device number 250
[ 125.368] ukiDynamicMajor: found major device number 250
[ 125.368] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 125.368] ukiOpenDevice: node name is /dev/ati/card0
[ 125.368] ukiOpenDevice: open result is 16, (OK)
[ 125.368] ukiOpenByBusid: ukiOpenMinor returns 16
[ 125.368] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 125.368] (II) fglrx(0): [uki] DRM interface version 1.0
[ 125.368] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 125.368] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 125.368] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f364a94e000
[ 125.368] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 125.369] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 125.369] (II) fglrx(0): swlDriScreenInit done
[ 125.369] (II) fglrx(0): Kernel Module Version Information:
[ 125.369] (II) fglrx(0): Name: fglrx
[ 125.369] (II) fglrx(0): Version: 8.89.4
[ 125.369] (II) fglrx(0): Date: Sep 14 2011
[ 125.369] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 125.369] (II) fglrx(0): Kernel Module version matches driver.
[ 125.369] (II) fglrx(0): Kernel Module Build Time Information:
[ 125.369] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.0.0-1-amd64
[ 125.369] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 125.369] (II) fglrx(0): Build-Kernel __SMP__: no
[ 125.369] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 125.369] (II) fglrx(0): [uki] register handle = 0x00004000
[ 125.400] (II) fglrx(0): DRI initialization successfull
[ 125.400] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 125.427] (==) fglrx(0): Backing store disabled
[ 125.427] (II) Loading extension FGLRXEXTENSION
[ 125.427] (**) fglrx(0): DPMS enabled
[ 125.427] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 125.428] (**) fglrx(0): Textured Video is enabled.
[ 125.428] (II) LoadModule: "glesx"
[ 125.428] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 125.566] (II) Module glesx: vendor="X.Org Foundation"
[ 125.566] compiled for 1.4.99.906, module version = 1.0.0
[ 125.566] (II) Loading extension GLESX
[ 125.566] (II) fglrx(0): GLESX enableFlags = 528
[ 125.567] (II) fglrx(0): GLESX is enabled
[ 125.567] (II) LoadModule: "amdxmm"
[ 125.567] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 125.594] (II) Module amdxmm: vendor="X.Org Foundation"
[ 125.594] compiled for 1.4.99.906, module version = 2.0.0
[ 125.594] (II) Loading extension AMDXVOPL
[ 125.594] (II) Loading extension AMDXVBA
[ 125.594] [- XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange
[ 125.616] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 125.618] (II) fglrx(0): Enable composite support successfully
[ 125.618] (II) fglrx(0): X context handle = 0x1
[ 125.618] (II) fglrx(0): [DRI] installation complete
[ 125.618] (==) fglrx(0): Silken mouse enabled
[ 125.632] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 125.633] (II) fglrx(0): Disabling in-server RandR and enabling in-driver
RandR 1.2.
[ 125.633] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 125.633] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 126.675] (--) RandR disabled
[ 126.675] (II) Initializing built-in extension Generic Event Extension
[ 126.675] (II) Initializing built-in extension SHAPE
[ 126.675] (II) Initializing built-in extension MIT-SHM
[ 126.675] (II) Initializing built-in extension XInputExtension
[ 126.675] (II) Initializing built-in extension XTEST
[ 126.675] (II) Initializing built-in extension BIG-REQUESTS
[ 126.675] (II) Initializing built-in extension SYNC
[ 126.675] (II) Initializing built-in extension XKEYBOARD
[ 126.675] (II) Initializing built-in extension XC-MISC
[ 126.675] (II) Initializing built-in extension SECURITY
[ 126.675] (II) Initializing built-in extension XINERAMA
[ 126.675] (II) Initializing built-in extension XFIXES
[ 126.675] (II) Initializing built-in extension RENDER
[ 126.675] (II) Initializing built-in extension RANDR
[ 126.675] (II) Initializing built-in extension COMPOSITE
[ 126.675] (II) Initializing built-in extension DAMAGE
[ 126.675] (II) SELinux: Disabled on system
[ 126.767] ukiDynamicMajor: found major device number 250
[ 126.767] ukiDynamicMajor: found major device number 250
[ 126.767] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 126.767] ukiOpenDevice: node name is /dev/ati/card0
[ 126.767] ukiOpenDevice: open result is 18, (OK)
[ 126.767] ukiOpenByBusid: ukiOpenMinor returns 18
[ 126.767] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 128.133] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX:
Initialized DRI GL provider for screen 0
[ 128.133] (II) fglrx(0): Enable the clock gating!
[ 128.133] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 128.831] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 128.831] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 128.831] (II) LoadModule: "evdev"
[ 128.855] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 128.859] (II) Module evdev: vendor="X.Org Foundation"
[ 128.860] compiled for 1.10.1, module version = 2.6.0
[ 128.860] Module class: X.Org XInput Driver
[ 128.860] ABI class: X.Org XInput driver, version 12.2
[ 128.860] (II) Using input driver 'evdev' for 'Power Button'
[ 128.860] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 128.860] (**) Power Button: always reports core events
[ 128.860] (**) Power Button: Device: "/dev/input/event4"
[ 128.860] (--) Power Button: Found keys
[ 128.860] (II) Power Button: Configuring as keyboard
[ 128.860] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 128.860] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD)
[ 128.860] (**) Option "xkb_rules" "evdev"
[ 128.860] (**) Option "xkb_model" "pc104"
[ 128.860] (**) Option "xkb_layout" "us"
[ 128.990] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 128.991] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 128.991] (II) Using input driver 'evdev' for 'Video Bus'
[ 128.991] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 128.991] (**) Video Bus: always reports core events
[ 128.991] (**) Video Bus: Device: "/dev/input/event5"
[ 128.991] (--) Video Bus: Found keys
[ 128.991] (II) Video Bus: Configuring as keyboard
[ 128.991] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5/event5"
[ 128.991] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 128.991] (**) Option "xkb_rules" "evdev"
[ 128.991] (**) Option "xkb_model" "pc104"
[ 128.991] (**) Option "xkb_layout" "us"
[ 129.004] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 129.004] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 129.004] (II) Using input driver 'evdev' for 'Power Button'
[ 129.004] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 129.004] (**) Power Button: always reports core events
[ 129.004] (**) Power Button: Device: "/dev/input/event1"
[ 129.004] (--) Power Button: Found keys
[ 129.004] (II) Power Button: Configuring as keyboard
[ 129.004] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 129.005] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD)
[ 129.005] (**) Option "xkb_rules" "evdev"
[ 129.005] (**) Option "xkb_model" "pc104"
[ 129.005] (**) Option "xkb_layout" "us"
[ 129.005] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 129.005] (II) No input driver/identifier specified (ignoring)
[ 129.005] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 129.005] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 129.005] (II) Using input driver 'evdev' for 'Sleep Button'
[ 129.005] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 129.005] (**) Sleep Button: always reports core events
[ 129.005] (**) Sleep Button: Device: "/dev/input/event2"
[ 129.005] (--) Sleep Button: Found keys
[ 129.005] (II) Sleep Button: Configuring as keyboard
[ 129.005] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 129.005] (II) XINPUT: Adding extended input device "Sleep Button" (type:
KEYBOARD)
[ 129.005] (**) Option "xkb_rules" "evdev"
[ 129.005] (**) Option "xkb_model" "pc104"
[ 129.005] (**) Option "xkb_layout" "us"
[ 129.006] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP
(/dev/input/event13)
[ 129.006] (II) No input driver/identifier specified (ignoring)
[ 129.007] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2M
(/dev/input/event8)
[ 129.007] (**) Laptop_Integrated_Webcam_2M: Applying InputClass "evdev
keyboard catchall"
[ 129.007] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2M'
[ 129.007] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 129.008] (**) Laptop_Integrated_Webcam_2M: always reports core events
[ 129.008] (**) Laptop_Integrated_Webcam_2M: Device: "/dev/input/event8"
[ 129.008] (--) Laptop_Integrated_Webcam_2M: Found keys
[ 129.008] (II) Laptop_Integrated_Webcam_2M: Configuring as keyboard
[ 129.008] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input8/event8"
[ 129.008] (II) XINPUT: Adding extended input device
"Laptop_Integrated_Webcam_2M" (type: KEYBOARD)
[ 129.008] (**) Option "xkb_rules" "evdev"
[ 129.008] (**) Option "xkb_model" "pc104"
[ 129.008] (**) Option "xkb_layout" "us"
[ 129.008] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event9)
[ 129.009] (II) No input driver/identifier specified (ignoring)
[ 129.009] (II) config/udev: Adding input device HDA Intel Mic at Ext Left
Jack (/dev/input/event10)
[ 129.009] (II) No input driver/identifier specified (ignoring)
[ 129.009] (II) config/udev: Adding input device HDA Intel HP Out at Ext Left
Jack (/dev/input/event11)
[ 129.009] (II) No input driver/identifier specified (ignoring)
[ 129.010] (II) config/udev: Adding input device HDA Intel HP Out at Ext Left
Jack (/dev/input/event12)
[ 129.010] (II) No input driver/identifier specified (ignoring)
[ 129.017] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 129.017] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 129.017] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 129.017] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 129.017] (**) AT Translated Set 2 keyboard: always reports core events
[ 129.017] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 129.017] (--) AT Translated Set 2 keyboard: Found keys
[ 129.017] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 129.018] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 129.018] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD)
[ 129.018] (**) Option "xkb_rules" "evdev"
[ 129.018] (**) Option "xkb_model" "pc104"
[ 129.018] (**) Option "xkb_layout" "us"
[ 129.018] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event7)
[ 129.018] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[ 129.018] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[ 129.018] (II) LoadModule: "synaptics"
[ 129.019] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 129.092] (II) Module synaptics: vendor="X.Org Foundation"
[ 129.092] compiled for 1.10.2, module version = 1.4.1
[ 129.092] Module class: X.Org XInput Driver
[ 129.092] ABI class: X.Org XInput driver, version 12.2
[ 129.092] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 129.092] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 129.092] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 129.092] (**) Option "Device" "/dev/input/event7"
[ 129.096] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5836
[ 129.096] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4908
[ 129.096] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 129.096] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 129.096] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 129.108] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 129.108] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 129.112] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 129.112] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics
TouchPad" (type: TOUCHPAD)
[ 129.112] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant
deceleration 2.5
[ 129.112] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 129.112] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 129.113] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 129.113] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 129.113] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 129.113] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 129.113] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 129.114] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse0)
[ 129.114] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[ 129.114] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 129.114] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 129.114] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 129.114] (**) Option "Device" "/dev/input/mouse0"
[ 129.114] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range. defaulting
to 1615 - 5685
[ 129.114] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range. defaulting
to 1729 - 4171
[ 129.114] (--) SynPS/2 Synaptics TouchPad: invalid pressure range.
defaulting to 0 - 256
[ 129.114] (--) SynPS/2 Synaptics TouchPad: invalid finger width range.
defaulting to 0 - 16
[ 129.135] (EE) Query no Synaptics: 6003C8
[ 129.135] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 129.135] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize
Synaptics hardware.
[ 129.135] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[ 129.135] (II) UnloadModule: "synaptics"
[ 129.135] (II) Unloading synaptics
[ 129.140] (II) config/udev: Adding input device ACPI Virtual Keyboard Device
(/dev/input/event14)
[ 129.140] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev
keyboard catchall"
[ 129.140] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 129.140] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 129.140] (**) ACPI Virtual Keyboard Device: always reports core events
[ 129.140] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
[ 129.140] (--) ACPI Virtual Keyboard Device: Found keys
[ 129.140] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 129.140] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input14/event14"
[ 129.140] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard
Device" (type: KEYBOARD)
[ 129.140] (**) Option "xkb_rules" "evdev"
[ 129.140] (**) Option "xkb_model" "pc104"
[ 129.140] (**) Option "xkb_layout" "us"
[ 129.141] (II) config/udev: Adding input device Dell WMI hotkeys
(/dev/input/event6)
[ 129.141] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 129.141] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 129.141] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 129.141] (**) Dell WMI hotkeys: always reports core events
[ 129.141] (**) Dell WMI hotkeys: Device: "/dev/input/event6"
[ 129.141] (--) Dell WMI hotkeys: Found keys
[ 129.141] (II) Dell WMI hotkeys: Configuring as keyboard
[ 129.141] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input6/event6"
[ 129.141] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type:
KEYBOARD)
[ 129.141] (**) Option "xkb_rules" "evdev"
[ 129.141] (**) Option "xkb_model" "pc104"
[ 129.141] (**) Option "xkb_layout" "us"
[ 129.622] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in
RANDR 1.2 capable environments
[ 142.125] Warning: LookupWindow()/SecurityLookupWindow() are deprecated.
Please convert your driver/module to use dixLookupWindow().
-- System Information:
Debian Release: wheezy/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'testing'),
(500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages fglrx-driver depends on:
ii glx-alternative-fglrx 0.1.94
ii libc6 2.13-21
ii libfglrx 1:11-9-1
ii libgl1-mesa-glx [libgl1] 7.11-6
ii libx11-6 2:1.4.4-2
ii libxext6 2:1.3.0-3
ii libxrandr2 2:1.3.2-2
ii libxrender1 1:0.9.6-2
ii xserver-xorg-core [xorg-video-abi-10] 2:1.10.4-1
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:11-8-1
ii fglrx-glx-ia32 1:11-9-1
ii fglrx-modules-dkms [fglrx-kernel-11-9] 1:11-9-1
ii libgl1-fglrx-glx 1:11-9-1
Versions of packages fglrx-driver suggests:
pn fglrx-control 1:11-8-1
pn xvba-va-driver <none>
-- debconf information:
fglrx-driver/acpi_switch: false
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log.diff
Type: text/x-diff
Size: 170365 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/pkg-fglrx-devel/attachments/20111017/abb830f4/attachment-0001.diff>
More information about the Pkg-fglrx-devel
mailing list