[Pkg-fglrx-devel] Bug#684702: fglrx-legacy-driver dispalay a "AMD Testing use only" watermark on the bottom right corner
Adrien Le Guillou
gallarusdebrb at gmail.com
Mon Aug 13 08:36:11 UTC 2012
Package: fglrx-legacy-driver
Version: 8.97.100.3-1
Severity: normal
Dear Maintainer,
after installing fglrx-legacy-driver on debian wheezy for my radeon mobility
hd3471 hybrid x2 and configuring it with aticonfig --initial there is a
watermark saying "AMD Testing use only" which is present everytime on the
bottom right corner of the screen (including in the gdm3 logscreen). Either way
it works perfectly well.
-- Package-specific info:
Full fglrx package list:
ii fglrx-legacy-a 8.97.100.3-1 legacy events daemon for the non-free AMD Ra
ii fglrx-legacy-c 8.97.100.3-1 control panel for the non-free ATI/AMD Radeo
ii fglrx-legacy-d 8.97.100.3-1 non-free ATI/AMD RadeonHD display driver (le
ii fglrx-legacy-m 8.97.100.3-1 dkms module source for the non-free ATI/AMD
ii libfglrx-legac 8.97.100.3-1 non-free ATI/AMD RadeonHD display driver (ru
ii libfglrx-legac 8.97.100.3-1 AMD XvBA (X-Video Bitstream Acceleration) ru
ii libgl1-fglrx-l 8.97.100.3-1 proprietary libGL for the non-free ATI/AMD R
VGA-compatible devices on PCI bus:
01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics]
02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV620 [Mobility Radeon HD 3400 Series]
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.225070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.692922] Linux agpgart interface v0.103
[ 7.686447] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.998324] [fglrx] Maximum main memory to use for locked dma buffers: 2561 MBytes.
[ 7.998442] [fglrx] vendor: 1002 device: 9612 count: 1
[ 7.998784] [fglrx] vendor: 1002 device: 95c4 count: 2
[ 7.999177] [fglrx] ioport: bar 1, base 0x9000, size: 0x100
[ 7.999592] [fglrx] ioport: bar 4, base 0xa000, size: 0x100
[ 7.999901] [fglrx] Kernel PAT support is enabled
[ 7.999949] [fglrx] module loaded - fglrx 8.97.2 [Jul 4 2012] with 2 minors
[ 20.845895] fglrx_pci 0000:02:00.0: irq 46 for MSI/MSI-X
[ 20.846687] [fglrx] Firegl kernel thread PID: 1880
[ 20.846971] [fglrx] Firegl kernel thread PID: 1881
[ 20.847069] [fglrx] Firegl kernel thread PID: 1882
[ 20.847405] [fglrx] IRQ 46 Enabled
[ 21.191811] [fglrx] GART Table is not in FRAME_BUFFER range
[ 23.259806] [fglrx] Gart USWC size:844 M.
[ 23.259812] [fglrx] Gart cacheable size:333 M.
[ 23.259818] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 23.259822] [fglrx] Reserved FB block: Unshared offset:fd55000, size:2a6000
[ 23.259825] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 27.239581] [fglrx:firegl_irq_enable] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
Xorg X server configuration file status:
-rw-r--r-- 1 root root 684 Aug 13 00:19 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 44629 Aug 13 10:20 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 19.372]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 19.372] X Protocol Version 11, Revision 0
[ 19.372] Build Operating System: Linux 3.2.0-3-amd64 x86_64 Debian
[ 19.372] Current Operating System: Linux Gallarus 3.2.0-3-amd64 #1 SMP Thu Jun 28 09:07:26 UTC 2012 x86_64
[ 19.372] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=a24ecc6f-f837-45d6-a981-809073ef332f ro quiet
[ 19.372] Build Date: 18 July 2012 08:00:38AM
[ 19.372] xorg-server 2:1.12.3-1 (Julien Cristau <jcristau at debian.org>)
[ 19.373] Current version of pixman: 0.26.0
[ 19.373] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.373] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.373] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 13 10:19:33 2012
[ 19.400] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.433] (==) ServerLayout "aticonfig Layout"
[ 19.433] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 19.434] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 19.435] (**) | |-->Device "aticonfig-Device[0]-0"
[ 19.435] (==) Automatically adding devices
[ 19.435] (==) Automatically enabling devices
[ 19.451] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19.451] Entry deleted from font path.
[ 19.486] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 19.486] Entry deleted from font path.
[ 19.486] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 19.486] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.487] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.487] (II) Loader magic: 0x7f9bcd51aae0
[ 19.487] (II) Module ABI versions:
[ 19.487] X.Org ANSI C Emulation: 0.4
[ 19.487] X.Org Video Driver: 12.0
[ 19.487] X.Org XInput driver : 16.0
[ 19.487] X.Org Server Extension : 6.0
[ 19.491] (--) PCI: (0:1:5:0) 1002:9612:1025:0166 rev 0, Mem @ 0xd0000000/268435456, 0xafdf0000/65536, 0xafe00000/1048576, I/O @ 0x00009000/256
[ 19.491] (--) PCI:*(0:2:0:0) 1002:95c4:1025:0166 rev 0, Mem @ 0xb0000000/268435456, 0xafbf0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[ 19.492] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.492] (II) "extmod" will be loaded by default.
[ 19.492] (II) "dbe" will be loaded by default.
[ 19.492] (II) "glx" will be loaded by default.
[ 19.492] (II) "record" will be loaded by default.
[ 19.492] (II) "dri" will be loaded by default.
[ 19.493] (II) "dri2" will be loaded by default.
[ 19.493] (II) LoadModule: "extmod"
[ 19.509] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19.527] (II) Module extmod: vendor="X.Org Foundation"
[ 19.527] compiled for 1.12.3, module version = 1.0.0
[ 19.527] Module class: X.Org Server Extension
[ 19.527] ABI class: X.Org Server Extension, version 6.0
[ 19.527] (II) Loading extension SELinux
[ 19.527] (II) Loading extension MIT-SCREEN-SAVER
[ 19.527] (II) Loading extension XFree86-VidModeExtension
[ 19.527] (II) Loading extension XFree86-DGA
[ 19.527] (II) Loading extension DPMS
[ 19.527] (II) Loading extension XVideo
[ 19.527] (II) Loading extension XVideo-MotionCompensation
[ 19.527] (II) Loading extension X-Resource
[ 19.527] (II) LoadModule: "dbe"
[ 19.528] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.538] (II) Module dbe: vendor="X.Org Foundation"
[ 19.538] compiled for 1.12.3, module version = 1.0.0
[ 19.538] Module class: X.Org Server Extension
[ 19.538] ABI class: X.Org Server Extension, version 6.0
[ 19.538] (II) Loading extension DOUBLE-BUFFER
[ 19.538] (II) LoadModule: "glx"
[ 19.539] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 19.571] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 19.571] compiled for 6.9.0, module version = 1.0.0
[ 19.572] (II) Loading extension GLX
[ 19.573] (II) LoadModule: "record"
[ 19.573] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19.619] (II) Module record: vendor="X.Org Foundation"
[ 19.619] compiled for 1.12.3, module version = 1.13.0
[ 19.619] Module class: X.Org Server Extension
[ 19.620] ABI class: X.Org Server Extension, version 6.0
[ 19.620] (II) Loading extension RECORD
[ 19.620] (II) LoadModule: "dri"
[ 19.620] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 19.649] (II) Module dri: vendor="X.Org Foundation"
[ 19.649] compiled for 1.12.3, module version = 1.0.0
[ 19.649] ABI class: X.Org Server Extension, version 6.0
[ 19.650] (II) Loading extension XFree86-DRI
[ 19.650] (II) LoadModule: "dri2"
[ 19.650] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19.651] (II) Module dri2: vendor="X.Org Foundation"
[ 19.651] compiled for 1.12.3, module version = 1.2.0
[ 19.651] ABI class: X.Org Server Extension, version 6.0
[ 19.651] (II) Loading extension DRI2
[ 19.651] (II) LoadModule: "fglrx"
[ 19.653] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 20.075] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 20.075] compiled for 1.4.99.906, module version = 8.97.2
[ 20.075] Module class: X.Org Video Driver
[ 20.078] (II) Loading sub module "fglrxdrm"
[ 20.078] (II) LoadModule: "fglrxdrm"
[ 20.078] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 20.117] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 20.117] compiled for 1.4.99.906, module version = 8.97.2
[ 20.117] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 20.117] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 20.118] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 20.118] (++) using VT number 7
[ 20.125] (WW) Falling back to old probe method for fglrx
[ 20.283] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 20.291] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 1:5:0) found
[ 20.291] (--) Chipset Supported AMD Graphics Processor (0x95C4) found
[ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:17:0) found
[ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:0) found
[ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:1) found
[ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:2) found
[ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:0) found
[ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:1) found
[ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:2) found
[ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:0) found
[ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:1) found
[ 20.341] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:2) found
[ 20.342] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:3) found
[ 20.342] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:4) found
[ 20.342] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 2:0:1) found
[ 20.342] (**) ChipID override: 0x9612
[ 20.342] (**) Chipset Supported AMD Graphics Processor (0x9612) found
[ 20.351] ukiDynamicMajor: found major device number 250
[ 20.351] ukiDynamicMajor: found major device number 250
[ 20.351] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 20.351] ukiOpenDevice: node name is /dev/ati/card0
[ 20.351] ukiOpenDevice: open result is 8, (OK)
[ 20.351] ukiOpenByBusid: ukiOpenMinor returns 8
[ 20.351] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 20.351] ukiOpenDevice: node name is /dev/ati/card1
[ 20.351] ukiOpenDevice: open result is 8, (OK)
[ 20.351] ukiOpenByBusid: ukiOpenMinor returns 8
[ 20.351] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 20.354] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 20.354] (II) AMD Video driver is unsigned
[ 20.354] (II) fglrx(0): pEnt->device->identifier=0x7f9bcd6ad7b0
[ 20.354] (II) pEnt->device->identifier=(nil)
[ 20.355] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 20.356] (II) Loading sub module "vgahw"
[ 20.356] (II) LoadModule: "vgahw"
[ 20.357] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 20.380] (II) Module vgahw: vendor="X.Org Foundation"
[ 20.380] compiled for 1.12.3, module version = 0.1.0
[ 20.380] ABI class: X.Org Video Driver, version 12.0
[ 20.380] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 20.381] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 20.381] (==) fglrx(0): Default visual is TrueColor
[ 20.381] (**) fglrx(0): Option "DPMS" "true"
[ 20.381] (==) fglrx(0): RGB weight 888
[ 20.381] (II) fglrx(0): Using 8 bits per RGB
[ 20.381] (==) fglrx(0): Buffer Tiling is ON
[ 20.382] (II) Loading sub module "fglrxdrm"
[ 20.382] (II) LoadModule: "fglrxdrm"
[ 20.382] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 20.382] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 20.382] compiled for 1.4.99.906, module version = 8.97.2
[ 20.397] ukiDynamicMajor: found major device number 250
[ 20.398] ukiDynamicMajor: found major device number 250
[ 20.398] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 20.398] ukiOpenDevice: node name is /dev/ati/card0
[ 20.398] ukiOpenDevice: open result is 13, (OK)
[ 20.398] ukiOpenByBusid: ukiOpenMinor returns 13
[ 20.398] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 20.398] ukiOpenDevice: node name is /dev/ati/card1
[ 20.398] ukiOpenDevice: open result is 13, (OK)
[ 20.398] ukiOpenByBusid: ukiOpenMinor returns 13
[ 20.398] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 20.399] ukiDynamicMajor: found major device number 250
[ 20.399] ukiDynamicMajor: found major device number 250
[ 20.399] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 20.399] ukiOpenDevice: node name is /dev/ati/card0
[ 20.399] ukiOpenDevice: open result is 14, (OK)
[ 20.399] ukiOpenByBusid: ukiOpenMinor returns 14
[ 20.399] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 20.400] (**) fglrx(0): NoAccel = NO
[ 20.400] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 20.400] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
[ 20.400] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0166)
[ 20.400] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 20.401] (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
[ 20.401] (--) fglrx(0): MMIO registers at 0xafbf0000
[ 20.401] (--) fglrx(0): I/O port at 0x0000a000
[ 20.401] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 20.425] (II) fglrx(0): AC Adapter is used
[ 20.493] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 20.626] (II) Loading sub module "vbe"
[ 20.626] (II) LoadModule: "vbe"
[ 20.626] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 20.691] (II) Module vbe: vendor="X.Org Foundation"
[ 20.692] compiled for 1.12.3, module version = 1.1.0
[ 20.692] ABI class: X.Org Video Driver, version 12.0
[ 20.693] (II) fglrx(0): VESA BIOS detected
[ 20.693] (II) fglrx(0): VESA VBE Version 3.0
[ 20.693] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 20.694] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 20.694] (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
[ 20.694] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 20.694] (II) fglrx(0): VESA VBE OEM Product: M82
[ 20.694] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 20.748] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 20.748] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[ 20.748] (II) fglrx(0): PCIE card detected
[ 20.748] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 20.748] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 20.748] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0166)
[ 20.748] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 20.748] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 20.748] (--) fglrx(0): MMIO registers at 0xafdf0000
[ 20.748] (--) fglrx(0): I/O port at 0x00009000
[ 20.748] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 20.749] (II) fglrx(0): AC Adapter is used
[ 20.752] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
[ 20.767] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 20.767] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[ 20.767] (II) fglrx(0): PCIE card detected
[ 20.767] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 20.767] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 20.769] (II) fglrx(0): Using adapter: 2:0.0.
[ 20.797] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 20.847] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[ 20.847] (II) fglrx(0): Using adapter: 1:5.0.
[ 20.869] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 21.192] (II) fglrx(0): RandR 1.2 support is enabled!
[ 21.192] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 21.192] (==) fglrx(0): Center Mode is disabled
[ 21.192] (II) Loading sub module "fb"
[ 21.192] (II) LoadModule: "fb"
[ 21.192] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.281] (II) Module fb: vendor="X.Org Foundation"
[ 21.281] compiled for 1.12.3, module version = 1.0.0
[ 21.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.281] (II) Loading sub module "ddc"
[ 21.281] (II) LoadModule: "ddc"
[ 21.281] (II) Module "ddc" already built-in
[ 22.479] (II) fglrx(0): Finished Initialize PPLIB!
[ 22.853] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 22.853] (II) fglrx(0): Output DFP1 has no monitor section
[ 22.853] (II) fglrx(0): Output CRT1 has no monitor section
[ 22.853] (II) Loading sub module "ddc"
[ 22.853] (II) LoadModule: "ddc"
[ 22.853] (II) Module "ddc" already built-in
[ 22.853] (II) fglrx(0): Connected Display0: LVDS
[ 22.854] (II) fglrx(0): Display0 EDID data ---------------------------
[ 22.854] (II) fglrx(0): Manufacturer: SEC Model: 304c Serial#: 0
[ 22.854] (II) fglrx(0): Year: 2008 Week: 0
[ 22.854] (II) fglrx(0): EDID Version: 1.3
[ 22.854] (II) fglrx(0): Digital Display Input
[ 22.854] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 20
[ 22.854] (II) fglrx(0): Gamma: 2.20
[ 22.854] (II) fglrx(0): No DPMS capabilities specified
[ 22.854] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 22.855] (II) fglrx(0): First detailed timing is preferred mode
[ 22.855] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 22.855] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 22.855] (II) fglrx(0): Manufacturer's mask: 0
[ 22.855] (II) fglrx(0): Supported detailed timing:
[ 22.855] (II) fglrx(0): clock: 72.3 MHz Image Size: 353 x 198 mm
[ 22.855] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 22.855] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 22.855] (II) fglrx(0): Unknown vendor-specific block f
[ 22.855] (II) fglrx(0): SAMSUNG
[ 22.856] (II) fglrx(0): 160AT01-A02
[ 22.856] (II) fglrx(0): EDID (in hex):
[ 22.856] (II) fglrx(0): 00ffffffffffff004ca34c3000000000
[ 22.856] (II) fglrx(0): 00120103802314780a87f594574f8c27
[ 22.856] (II) fglrx(0): 27505400000001010101010101010101
[ 22.856] (II) fglrx(0): 010101010101411c56a0500016303020
[ 22.856] (II) fglrx(0): 250061c6100000190000000f00000000
[ 22.856] (II) fglrx(0): 00000000001eb4027400000000fe0053
[ 22.856] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 22.857] (II) fglrx(0): 00313630415430312d4130320a2000b8
[ 22.857] (II) fglrx(0): End of Display0 EDID data --------------------
[ 23.256] (II) fglrx(0): EDID for output LVDS
[ 23.256] (II) fglrx(0): Manufacturer: SEC Model: 304c Serial#: 0
[ 23.256] (II) fglrx(0): Year: 2008 Week: 0
[ 23.256] (II) fglrx(0): EDID Version: 1.3
[ 23.256] (II) fglrx(0): Digital Display Input
[ 23.256] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 20
[ 23.256] (II) fglrx(0): Gamma: 2.20
[ 23.256] (II) fglrx(0): No DPMS capabilities specified
[ 23.256] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23.256] (II) fglrx(0): First detailed timing is preferred mode
[ 23.256] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 23.256] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 23.256] (II) fglrx(0): Manufacturer's mask: 0
[ 23.256] (II) fglrx(0): Supported detailed timing:
[ 23.256] (II) fglrx(0): clock: 72.3 MHz Image Size: 353 x 198 mm
[ 23.256] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 23.256] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 23.256] (II) fglrx(0): Unknown vendor-specific block f
[ 23.256] (II) fglrx(0): SAMSUNG
[ 23.256] (II) fglrx(0): 160AT01-A02
[ 23.256] (II) fglrx(0): EDID (in hex):
[ 23.256] (II) fglrx(0): 00ffffffffffff004ca34c3000000000
[ 23.256] (II) fglrx(0): 00120103802314780a87f594574f8c27
[ 23.256] (II) fglrx(0): 27505400000001010101010101010101
[ 23.256] (II) fglrx(0): 010101010101411c56a0500016303020
[ 23.256] (II) fglrx(0): 250061c6100000190000000f00000000
[ 23.256] (II) fglrx(0): 00000000001eb4027400000000fe0053
[ 23.257] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 23.257] (II) fglrx(0): 00313630415430312d4130320a2000b8
[ 23.257] (II) fglrx(0): EDID vendor "SEC", prod id 12364
[ 23.257] (II) fglrx(0): Printing DDC gathered Modelines:
[ 23.257] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 23.257] (II) fglrx(0): Printing probed modes for output LVDS
[ 23.257] (II) fglrx(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 770 775 790 +hsync +vsync (47.4 kHz)
[ 23.257] (II) fglrx(0): Modeline "1280x768"x60.0 72.33 1280 1414 1446 1526 768 770 775 790 +hsync +vsync (47.4 kHz)
[ 23.257] (II) fglrx(0): Modeline "1280x720"x60.0 72.33 1280 1414 1446 1526 720 770 775 790 +hsync +vsync (47.4 kHz)
[ 23.257] (II) fglrx(0): Modeline "1024x768"x60.0 72.33 1024 1414 1446 1526 768 770 775 790 +hsync +vsync (47.4 kHz)
[ 23.257] (II) fglrx(0): Modeline "1024x600"x60.0 72.33 1024 1414 1446 1526 600 770 775 790 +hsync +vsync (47.4 kHz)
[ 23.257] (II) fglrx(0): Modeline "800x600"x60.0 72.33 800 1414 1446 1526 600 770 775 790 +hsync +vsync (47.4 kHz)
[ 23.257] (II) fglrx(0): Modeline "800x480"x60.0 72.33 800 1414 1446 1526 480 770 775 790 +hsync +vsync (47.4 kHz)
[ 23.257] (II) fglrx(0): Modeline "720x480"x60.0 72.33 720 1414 1446 1526 480 770 775 790 +hsync +vsync (47.4 kHz)
[ 23.257] (II) fglrx(0): Modeline "640x480"x60.0 72.33 640 1414 1446 1526 480 770 775 790 +hsync +vsync (47.4 kHz)
[ 23.257] (II) fglrx(0): EDID for output DFP1
[ 23.257] (II) fglrx(0): EDID for output CRT1
[ 23.257] (II) fglrx(0): Output LVDS connected
[ 23.257] (II) fglrx(0): Output DFP1 disconnected
[ 23.257] (II) fglrx(0): Output CRT1 disconnected
[ 23.257] (II) fglrx(0): Using exact sizes for initial modes
[ 23.257] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 23.257] (II) fglrx(0): Display dimensions: (350, 200) mm
[ 23.257] (II) fglrx(0): DPI set to (99, 97)
[ 23.257] (II) fglrx(0): Adapter ATI Mobility Radeon HD 3400 Series has 2 configurable heads and 1 displays connected.
[ 23.257] (==) fglrx(0): PseudoColor visuals disabled
[ 23.257] (II) Loading sub module "ramdac"
[ 23.257] (II) LoadModule: "ramdac"
[ 23.257] (II) Module "ramdac" already built-in
[ 23.257] (==) fglrx(0): NoDRI = NO
[ 23.257] (==) fglrx(0): Capabilities: 0x00000000
[ 23.257] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 23.257] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 23.257] (==) fglrx(0): UseFastTLS=0
[ 23.258] (==) fglrx(0): BlockSignalsOnLock=1
[ 23.258] (--) Depth 24 pixmap format is 32 bpp
[ 23.258] (II) Loading extension ATIFGLRXDRI
[ 23.258] (II) fglrx(0): doing swlDriScreenInit
[ 23.258] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 23.258] ukiDynamicMajor: found major device number 250
[ 23.258] ukiDynamicMajor: found major device number 250
[ 23.259] ukiDynamicMajor: found major device number 250
[ 23.259] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 23.259] ukiOpenDevice: node name is /dev/ati/card0
[ 23.259] ukiOpenDevice: open result is 15, (OK)
[ 23.259] ukiOpenByBusid: ukiOpenMinor returns 15
[ 23.259] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 23.259] ukiOpenDevice: node name is /dev/ati/card1
[ 23.259] ukiOpenDevice: open result is 15, (OK)
[ 23.259] ukiOpenByBusid: ukiOpenMinor returns 15
[ 23.259] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 23.259] (II) fglrx(0): [uki] DRM interface version 1.0
[ 23.259] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 23.259] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 23.259] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9bcd126000
[ 23.259] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 23.259] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 23.259] (II) fglrx(0): swlDriScreenInit done
[ 23.259] (II) fglrx(0): Kernel Module Version Information:
[ 23.259] (II) fglrx(0): Name: fglrx
[ 23.259] (II) fglrx(0): Version: 8.97.2
[ 23.259] (II) fglrx(0): Date: Jul 4 2012
[ 23.259] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 23.259] (II) fglrx(0): Kernel Module version matches driver.
[ 23.259] (II) fglrx(0): Kernel Module Build Time Information:
[ 23.259] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.0-3-amd64
[ 23.259] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 23.259] (II) fglrx(0): Build-Kernel __SMP__: no
[ 23.259] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 23.259] (II) fglrx(0): [uki] register handle = 0x00004000
[ 23.379] (II) fglrx(0): DRI initialization successfull
[ 23.433] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
[ 23.448] (==) fglrx(0): Backing store disabled
[ 23.448] (II) Loading extension FGLRXEXTENSION
[ 23.449] (**) fglrx(0): DPMS enabled
[ 23.450] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 23.450] (**) fglrx(0): Textured Video is enabled.
[ 23.451] (II) LoadModule: "glesx"
[ 23.452] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 23.831] (II) Module glesx: vendor="X.Org Foundation"
[ 23.831] compiled for 1.4.99.906, module version = 1.0.0
[ 23.831] (II) Loading extension GLESX
[ 23.831] (II) fglrx(0): GLESX enableFlags = 528
[ 23.844] (II) fglrx(0): GLESX is enabled
[ 23.844] (II) LoadModule: "amdxmm"
[ 23.845] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 23.860] (II) Module amdxmm: vendor="X.Org Foundation"
[ 23.860] compiled for 1.4.99.906, module version = 2.0.0
[ 23.861] (II) Loading extension AMDXVOPL
[ 23.861] (II) Loading extension AMDXVBA
[ 23.873] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 23.880] (II) fglrx(0): Enable composite support successfully
[ 23.880] (WW) fglrx(0): Option "VendorName" is not used
[ 23.880] (WW) fglrx(0): Option "ModelName" is not used
[ 23.880] (II) fglrx(0): X context handle = 0x1
[ 23.881] (II) fglrx(0): [DRI] installation complete
[ 23.881] (==) fglrx(0): Silken mouse enabled
[ 23.882] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 23.882] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 23.883] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 23.883] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 24.565] (--) RandR disabled
[ 24.565] (II) Initializing built-in extension Generic Event Extension
[ 24.565] (II) Initializing built-in extension SHAPE
[ 24.565] (II) Initializing built-in extension MIT-SHM
[ 24.565] (II) Initializing built-in extension XInputExtension
[ 24.565] (II) Initializing built-in extension XTEST
[ 24.565] (II) Initializing built-in extension BIG-REQUESTS
[ 24.565] (II) Initializing built-in extension SYNC
[ 24.565] (II) Initializing built-in extension XKEYBOARD
[ 24.565] (II) Initializing built-in extension XC-MISC
[ 24.565] (II) Initializing built-in extension SECURITY
[ 24.565] (II) Initializing built-in extension XINERAMA
[ 24.565] (II) Initializing built-in extension XFIXES
[ 24.565] (II) Initializing built-in extension RENDER
[ 24.565] (II) Initializing built-in extension RANDR
[ 24.565] (II) Initializing built-in extension COMPOSITE
[ 24.565] (II) Initializing built-in extension DAMAGE
[ 24.565] (II) SELinux: Disabled on system
[ 24.569] ukiDynamicMajor: found major device number 250
[ 24.569] ukiDynamicMajor: found major device number 250
[ 24.569] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 24.569] ukiOpenDevice: node name is /dev/ati/card0
[ 24.569] ukiOpenDevice: open result is 16, (OK)
[ 24.569] ukiOpenByBusid: ukiOpenMinor returns 16
[ 24.569] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 24.569] ukiOpenDevice: node name is /dev/ati/card1
[ 24.569] ukiOpenDevice: open result is 16, (OK)
[ 24.569] ukiOpenByBusid: ukiOpenMinor returns 16
[ 24.569] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 26.308] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 26.519] (II) fglrx(0): Enable the clock gating!
[ 26.519] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 27.036] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 27.037] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.037] (II) LoadModule: "evdev"
[ 27.037] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.047] (II) Module evdev: vendor="X.Org Foundation"
[ 27.047] compiled for 1.12.1, module version = 2.7.0
[ 27.047] Module class: X.Org XInput Driver
[ 27.047] ABI class: X.Org XInput driver, version 16.0
[ 27.048] (II) Using input driver 'evdev' for 'Power Button'
[ 27.048] (**) Power Button: always reports core events
[ 27.048] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 27.048] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.048] (--) evdev: Power Button: Found keys
[ 27.048] (II) evdev: Power Button: Configuring as keyboard
[ 27.048] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 27.049] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.049] (**) Option "xkb_rules" "evdev"
[ 27.049] (**) Option "xkb_model" "pc105"
[ 27.049] (**) Option "xkb_layout" "fr"
[ 27.049] (**) Option "xkb_variant" "latin9"
[ 27.160] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 27.160] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.160] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.160] (**) Video Bus: always reports core events
[ 27.160] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 27.160] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27.160] (--) evdev: Video Bus: Found keys
[ 27.160] (II) evdev: Video Bus: Configuring as keyboard
[ 27.160] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[ 27.160] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 27.160] (**) Option "xkb_rules" "evdev"
[ 27.160] (**) Option "xkb_model" "pc105"
[ 27.160] (**) Option "xkb_layout" "fr"
[ 27.160] (**) Option "xkb_variant" "latin9"
[ 27.161] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 27.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.161] (II) Using input driver 'evdev' for 'Power Button'
[ 27.161] (**) Power Button: always reports core events
[ 27.161] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 27.161] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.161] (--) evdev: Power Button: Found keys
[ 27.161] (II) evdev: Power Button: Configuring as keyboard
[ 27.161] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 27.161] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 27.161] (**) Option "xkb_rules" "evdev"
[ 27.161] (**) Option "xkb_model" "pc105"
[ 27.161] (**) Option "xkb_layout" "fr"
[ 27.161] (**) Option "xkb_variant" "latin9"
[ 27.162] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 27.162] (II) No input driver specified, ignoring this device.
[ 27.162] (II) This device may have been added with another device file.
[ 27.162] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 27.162] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 27.162] (II) Using input driver 'evdev' for 'Sleep Button'
[ 27.162] (**) Sleep Button: always reports core events
[ 27.162] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 27.162] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 27.162] (--) evdev: Sleep Button: Found keys
[ 27.162] (II) evdev: Sleep Button: Configuring as keyboard
[ 27.162] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 27.162] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 27.162] (**) Option "xkb_rules" "evdev"
[ 27.163] (**) Option "xkb_model" "pc105"
[ 27.163] (**) Option "xkb_layout" "fr"
[ 27.163] (**) Option "xkb_variant" "latin9"
[ 27.163] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 27.163] (II) No input driver specified, ignoring this device.
[ 27.163] (II) This device may have been added with another device file.
[ 27.164] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/event1)
[ 27.164] (**) Logitech Unifying Device. Wireless PID:1025: Applying InputClass "evdev pointer catchall"
[ 27.164] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1025'
[ 27.164] (**) Logitech Unifying Device. Wireless PID:1025: always reports core events
[ 27.164] (**) evdev: Logitech Unifying Device. Wireless PID:1025: Device: "/dev/input/event1"
[ 27.164] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Vendor 0x46d Product 0xc52b
[ 27.164] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found 20 mouse buttons
[ 27.164] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found scroll wheel(s)
[ 27.164] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found relative axes
[ 27.164] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found x and y relative axes
[ 27.164] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Configuring as mouse
[ 27.164] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Adding scrollwheel support
[ 27.164] (**) evdev: Logitech Unifying Device. Wireless PID:1025: YAxisMapping: buttons 4 and 5
[ 27.164] (**) evdev: Logitech Unifying Device. Wireless PID:1025: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.164] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/input/input1/event1"
[ 27.164] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1025" (type: MOUSE, id 10)
[ 27.164] (II) evdev: Logitech Unifying Device. Wireless PID:1025: initialized for relative axes.
[ 27.165] (**) Logitech Unifying Device. Wireless PID:1025: (accel) keeping acceleration scheme 1
[ 27.165] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration profile 0
[ 27.165] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration factor: 2.000
[ 27.165] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration threshold: 4
[ 27.165] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/mouse0)
[ 27.165] (II) No input driver specified, ignoring this device.
[ 27.165] (II) This device may have been added with another device file.
[ 27.166] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2011 (/dev/input/event2)
[ 27.166] (**) Logitech Unifying Device. Wireless PID:2011: Applying InputClass "evdev keyboard catchall"
[ 27.166] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2011'
[ 27.166] (**) Logitech Unifying Device. Wireless PID:2011: always reports core events
[ 27.166] (**) evdev: Logitech Unifying Device. Wireless PID:2011: Device: "/dev/input/event2"
[ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Vendor 0x46d Product 0xc52b
[ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found 1 mouse buttons
[ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found scroll wheel(s)
[ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found relative axes
[ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing relative x/y axes to exist.
[ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found absolute axes
[ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing absolute x/y axes to exist.
[ 27.166] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found keys
[ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as mouse
[ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as keyboard
[ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Adding scrollwheel support
[ 27.166] (**) evdev: Logitech Unifying Device. Wireless PID:2011: YAxisMapping: buttons 4 and 5
[ 27.166] (**) evdev: Logitech Unifying Device. Wireless PID:2011: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.166] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/input/input2/event2"
[ 27.166] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2011" (type: KEYBOARD, id 11)
[ 27.166] (**) Option "xkb_rules" "evdev"
[ 27.166] (**) Option "xkb_model" "pc105"
[ 27.166] (**) Option "xkb_layout" "fr"
[ 27.166] (**) Option "xkb_variant" "latin9"
[ 27.166] (II) evdev: Logitech Unifying Device. Wireless PID:2011: initialized for relative axes.
[ 27.167] (WW) evdev: Logitech Unifying Device. Wireless PID:2011: ignoring absolute axes.
[ 27.167] (**) Logitech Unifying Device. Wireless PID:2011: (accel) keeping acceleration scheme 1
[ 27.167] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration profile 0
[ 27.167] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration factor: 2.000
[ 27.167] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration threshold: 4
[ 27.167] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event13)
[ 27.167] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall"
[ 27.167] (II) Using input driver 'evdev' for 'Acer Crystal Eye webcam'
[ 27.167] (**) Acer Crystal Eye webcam: always reports core events
[ 27.167] (**) evdev: Acer Crystal Eye webcam: Device: "/dev/input/event13"
[ 27.167] (--) evdev: Acer Crystal Eye webcam: Vendor 0x64e Product 0xa103
[ 27.168] (--) evdev: Acer Crystal Eye webcam: Found keys
[ 27.168] (II) evdev: Acer Crystal Eye webcam: Configuring as keyboard
[ 27.168] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input13/event13"
[ 27.168] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD, id 12)
[ 27.168] (**) Option "xkb_rules" "evdev"
[ 27.168] (**) Option "xkb_model" "pc105"
[ 27.168] (**) Option "xkb_layout" "fr"
[ 27.168] (**) Option "xkb_variant" "latin9"
[ 27.168] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 27.169] (II) No input driver specified, ignoring this device.
[ 27.169] (II) This device may have been added with another device file.
[ 27.169] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event10)
[ 27.169] (II) No input driver specified, ignoring this device.
[ 27.169] (II) This device may have been added with another device file.
[ 27.169] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 27.169] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.169] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27.169] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.169] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 27.169] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 27.169] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 27.169] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 27.170] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 27.170] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 27.170] (**) Option "xkb_rules" "evdev"
[ 27.170] (**) Option "xkb_model" "pc105"
[ 27.170] (**) Option "xkb_layout" "fr"
[ 27.170] (**) Option "xkb_variant" "latin9"
[ 27.170] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 27.170] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 27.170] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 27.171] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 27.171] (II) LoadModule: "synaptics"
[ 27.171] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 27.197] (II) Module synaptics: vendor="X.Org Foundation"
[ 27.197] compiled for 1.12.1.902, module version = 1.6.2
[ 27.197] Module class: X.Org XInput Driver
[ 27.197] ABI class: X.Org XInput driver, version 16.0
[ 27.197] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 27.197] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.197] (**) Option "Device" "/dev/input/event11"
[ 27.208] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 27.208] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 27.208] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 27.208] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 27.208] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
[ 27.209] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 27.209] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27.209] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.216] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event11"
[ 27.216] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 27.216] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 27.216] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 27.216] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 27.218] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 27.218] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 27.218] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 27.218] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 27.219] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27.220] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 27.220] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 27.221] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 27.222] (II) No input driver specified, ignoring this device.
[ 27.222] (II) This device may have been added with another device file.
[ 27.224] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14)
[ 27.225] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 27.225] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 27.225] (**) ACPI Virtual Keyboard Device: always reports core events
[ 27.225] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
[ 27.225] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 27.225] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 27.225] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 27.225] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event14"
[ 27.225] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 15)
[ 27.226] (**) Option "xkb_rules" "evdev"
[ 27.226] (**) Option "xkb_model" "pc105"
[ 27.226] (**) Option "xkb_layout" "fr"
[ 27.226] (**) Option "xkb_variant" "latin9"
[ 27.239] (EE) fglrx(0): Can not enable interrupt sourceID 0xff000066!
[ 27.250] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 27.276] (II) fglrx(0): EDID vendor "SEC", prod id 12364
[ 27.276] (II) fglrx(0): Printing DDC gathered Modelines:
[ 27.276] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 31.976] (II) fglrx(0): EDID vendor "SEC", prod id 12364
[ 31.977] (II) fglrx(0): Printing DDC gathered Modelines:
[ 31.977] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 47.129] (II) fglrx(0): EDID vendor "SEC", prod id 12364
[ 47.129] (II) fglrx(0): Printing DDC gathered Modelines:
[ 47.129] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 50.559] (II) fglrx(0): EDID vendor "SEC", prod id 12364
[ 50.559] (II) fglrx(0): Printing DDC gathered Modelines:
[ 50.559] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 52.807] (II) fglrx(0): EDID vendor "SEC", prod id 12364
[ 52.807] (II) fglrx(0): Printing DDC gathered Modelines:
[ 52.807] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP)
Bug script output from package glx-alternative-fglrx:
Diversions:
diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
/usr/lib/mesa-diverted:
total 52
drwxr-xr-x 4 root root 4096 Aug 12 17:02 .
drwxr-xr-x 182 root root 36864 Aug 13 00:32 ..
drwxr-xr-x 2 root root 4096 Aug 2 14:33 i386-linux-gnu
drwxr-xr-x 2 root root 4096 Aug 12 17:02 x86_64-linux-gnu
/usr/lib/mesa-diverted/i386-linux-gnu/:
total 8
drwxr-xr-x 2 root root 4096 Aug 2 14:33 .
drwxr-xr-x 4 root root 4096 Aug 12 17:02 ..
/usr/lib/mesa-diverted/x86_64-linux-gnu/:
total 392
drwxr-xr-x 2 root root 4096 Aug 12 17:02 .
drwxr-xr-x 4 root root 4096 Aug 12 17:02 ..
lrwxrwxrwx 1 root root 12 Jul 29 15:02 libGL.so.1 -> libGL.so.1.2
-rw-r--r-- 1 root root 391896 Jul 29 15:02 libGL.so.1.2
Alternative 'glx':
glx - auto mode
link currently points to /usr/lib/fglrx
/usr/lib/fglrx - priority 99
slave glx--fglrx-blacklists-radeon.conf: /etc/ati/fglrx-blacklists-radeon.conf
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
slave glx--linux-libglx.so: /usr/lib/fglrx/fglrx-libglx.so
/usr/lib/mesa-diverted - priority 5
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
Current 'best' version is '/usr/lib/fglrx'.
lrwxrwxrwx 1 root root 14 Aug 12 17:02 /etc/alternatives/glx -> /usr/lib/fglrx
lrwxrwxrwx 1 root root 37 Aug 12 17:02 /etc/alternatives/glx--fglrx-blacklists-radeon.conf -> /etc/ati/fglrx-blacklists-radeon.conf
lrwxrwxrwx 1 root root 27 Aug 12 17:02 /etc/alternatives/glx--fglrx_drv.so -> /usr/lib/fglrx/fglrx_drv.so
lrwxrwxrwx 1 root root 42 Aug 12 17:02 /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
lrwxrwxrwx 1 root root 30 Aug 12 17:02 /etc/alternatives/glx--linux-libglx.so -> /usr/lib/fglrx/fglrx-libglx.so
File System:
lrwxrwxrwx 1 root root 21 Aug 12 17:02 /usr/lib/glx -> /etc/alternatives/glx
lrwxrwxrwx 1 root root 50 Aug 12 17:02 /usr/lib/x86_64-linux-gnu/libGL.so.1 -> /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu
-rw-r--r-- 1 root root 431600 Jul 18 10:16 /usr/lib/xorg/modules/extensions/libglx.so
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages fglrx-legacy-driver depends on:
ii debconf [debconf-2.0] 1.5.44
ii dpkg 1.16.4.3
ii glx-alternative-fglrx 0.2.90
ii libc6 2.13-33
ii libfglrx-legacy 8.97.100.3-1
ii libgl1-mesa-glx [libgl1] 8.0.4-1
ii libx11-6 2:1.5.0-1
ii libxext6 2:1.3.1-2
ii libxrandr2 2:1.3.2-2
ii libxrender1 1:0.9.7-1
ii xserver-xorg-core [xorg-video-abi-12] 2:1.12.3-1
Versions of packages fglrx-legacy-driver recommends:
ii fglrx-legacy-atieventsd 8.97.100.3-1
pn fglrx-legacy-glx-ia32 <none>
ii fglrx-legacy-modules-dkms [fglrx-kernel-8.97.100.3] 8.97.100.3-1
ii libgl1-fglrx-legacy-glx 8.97.100.3-1
pn libgl1-fglrx-legacy-glx-i386 <none>
Versions of packages fglrx-legacy-driver suggests:
pn amd-opencl-icd-legacy <none>
ii fglrx-legacy-control 8.97.100.3-1
pn xvba-va-driver <none>
-- debconf information:
fglrx-driver/removed-but-enabled-in-xorg-conf:
fglrx-driver/check-xorg-conf-on-removal: true
* fglrx-driver/needs-xorg-conf-to-enable:
More information about the Pkg-fglrx-devel
mailing list