[Pkg-fglrx-devel] Bug#733416: fglrx-control: amdcccle doesn't work with gnome update
Jerry Quinn
jlquinn at optonline.net
Sat Dec 28 19:49:00 UTC 2013
Package: fglrx-control
Version: 1:13.11~betav9.4-1
Severity: important
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
I just did a large update to my testing system. Afterwards, my dual monitor
xserver settings got confused so I tried to fire up amdcccle to fix it. However, I was greeted with:
jlquinn at cerberus:~$ amdcccle
(amdcccle:7837): Gtk-ERROR **: GTK+ 2.x symbols detected. Using GTK+ 2.x and GTK+ 3 in the same process is not supported
Trace/breakpoint trap
One of the updates was:
[UPGRADE] libgtk2.0-0:amd64 2.24.20-1 -> 2.24.22-1
This is the only update to libgtk2.0 that I've done since installing an ATI
card.
I don't know if the problem is libgtk or amdcccle, but I'm stuck.
-- Package-specific info:
Full fglrx package list:
ii fglrx-atievent 1:13.11~beta amd64 events daemon for the non-free AT
ii fglrx-control 1:13.11~beta amd64 control panel for the non-free AT
ii fglrx-driver 1:13.11~beta amd64 non-free ATI/AMD RadeonHD display
ii fglrx-modules- 1:13.11~beta amd64 dkms module source for the non-fr
ii libfglrx:amd64 1:13.11~beta amd64 non-free ATI/AMD RadeonHD display
ii libfglrx:i386 1:13.11~beta i386 non-free ATI/AMD RadeonHD display
ii libfglrx-amdxv 1:13.11~beta amd64 AMD XvBA (X-Video Bitstream Accel
ii libfglrx-amdxv 1:13.11~beta i386 AMD XvBA (X-Video Bitstream Accel
ii libgl1-fglrx-g 1:13.11~beta amd64 proprietary libGL for the non-fre
ii libgl1-fglrx-g 1:13.11~beta i386 proprietary libGL for the non-fre
ii libgl1-fglrx-g 1:13.11~beta i386 ATI/AMD binary OpenGL 32-bit libr
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: ATI Technologies Inc Device 68ba
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.405483] Linux agpgart interface v0.103
[ 18.491801] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 18.504166] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7770 MBytes.
[ 18.504343] <6>[fglrx] vendor: 1002 device: 68ba count: 1
[ 18.504719] <6>[fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 18.504994] <6>[fglrx] Kernel PAT support is enabled
[ 18.505012] <6>[fglrx] module loaded - fglrx 13.25.5 [Nov 22 2013] with 1 minors
[ 37.345338] fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[ 37.345954] <6>[fglrx] Firegl kernel thread PID: 3241
[ 37.346020] <6>[fglrx] Firegl kernel thread PID: 3242
[ 37.346076] <6>[fglrx] Firegl kernel thread PID: 3243
[ 37.346174] <6>[fglrx] IRQ 45 Enabled
[ 37.369566] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 37.369573] <6>[fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[ 37.369575] <6>[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[ 37.369576] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1238 Oct 5 13:01 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
# Option "Xinerama" "on"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Monitor"
Identifier "0-DFP3"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1600x1200"
Option "TargetRefresh" "60"
Option "Position" "1600 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP4"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1600x900"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP3" "0-DFP3"
Option "Monitor-DFP4" "0-DFP4"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3200 3200
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 20272 May 19 2013 /var/log/Xorg.6.log
-rw-r--r-- 1 root root 20272 May 19 2013 /var/log/Xorg.7.log
-rw-r--r-- 1 root root 20272 May 19 2013 /var/log/Xorg.8.log
-rw-r--r-- 1 root root 20005 Jun 29 2013 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 20005 Jun 29 2013 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 20005 Jun 29 2013 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 20005 Jun 29 2013 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 31639 Dec 28 14:10 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 53401 Dec 28 14:12 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 36.541]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 36.541] X Protocol Version 11, Revision 0
[ 36.541] Build Operating System: Linux 3.13.0-rc2-patser+ x86_64 Debian
[ 36.541] Current Operating System: Linux cerberus 3.11-2-amd64 #1 SMP Debian 3.11.10-1 (2013-12-04) x86_64
[ 36.541] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11-2-amd64 root=UUID=48ca44ea-960b-4451-a641-3d73c2f2c0ae ro quiet quiet
[ 36.541] Build Date: 13 December 2013 10:12:53AM
[ 36.541] xorg-server 2:1.14.5-1 (Maarten Lankhorst <maarten.lankhorst at ubuntu.com>)
[ 36.541] Current version of pixman: 0.32.4
[ 36.541] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 36.541] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.541] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 28 14:11:44 2013
[ 36.542] (==) Using config file: "/etc/X11/xorg.conf"
[ 36.542] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 36.553] (==) ServerLayout "aticonfig Layout"
[ 36.553] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 36.553] (**) | |-->Monitor "<default monitor>"
[ 36.553] (**) | |-->Device "aticonfig-Device[0]-0"
[ 36.553] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
[ 36.553] (==) Automatically adding devices
[ 36.553] (==) Automatically enabling devices
[ 36.553] (==) Automatically adding GPU devices
[ 36.553] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 36.553] Entry deleted from font path.
[ 36.553] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 36.553] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 36.553] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 36.553] (II) Loader magic: 0x7f07b3c48d00
[ 36.553] (II) Module ABI versions:
[ 36.553] X.Org ANSI C Emulation: 0.4
[ 36.553] X.Org Video Driver: 14.1
[ 36.553] X.Org XInput driver : 19.1
[ 36.553] X.Org Server Extension : 7.0
[ 36.555] (--) PCI:*(0:1:0:0) 1002:68ba:1545:6770 rev 0, Mem @ 0xe0000000/268435456, 0xf1000000/131072, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
[ 36.555] (II) Open ACPI successful (/var/run/acpid.socket)
[ 36.555] Initializing built-in extension Generic Event Extension
[ 36.555] Initializing built-in extension SHAPE
[ 36.555] Initializing built-in extension MIT-SHM
[ 36.555] Initializing built-in extension XInputExtension
[ 36.555] Initializing built-in extension XTEST
[ 36.555] Initializing built-in extension BIG-REQUESTS
[ 36.555] Initializing built-in extension SYNC
[ 36.555] Initializing built-in extension XKEYBOARD
[ 36.555] Initializing built-in extension XC-MISC
[ 36.555] Initializing built-in extension SECURITY
[ 36.555] Initializing built-in extension XINERAMA
[ 36.555] Initializing built-in extension XFIXES
[ 36.555] Initializing built-in extension RENDER
[ 36.555] Initializing built-in extension RANDR
[ 36.555] Initializing built-in extension COMPOSITE
[ 36.555] Initializing built-in extension DAMAGE
[ 36.555] Initializing built-in extension MIT-SCREEN-SAVER
[ 36.555] Initializing built-in extension DOUBLE-BUFFER
[ 36.555] Initializing built-in extension RECORD
[ 36.555] Initializing built-in extension DPMS
[ 36.555] Initializing built-in extension X-Resource
[ 36.555] Initializing built-in extension XVideo
[ 36.555] Initializing built-in extension XVideo-MotionCompensation
[ 36.555] Initializing built-in extension SELinux
[ 36.555] Initializing built-in extension XFree86-VidModeExtension
[ 36.555] Initializing built-in extension XFree86-DGA
[ 36.555] Initializing built-in extension XFree86-DRI
[ 36.555] Initializing built-in extension DRI2
[ 36.555] (II) LoadModule: "glx"
[ 36.555] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 36.555] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 36.555] compiled for 6.9.0, module version = 1.0.0
[ 36.555] Loading extension GLX
[ 36.555] (II) LoadModule: "fglrx"
[ 36.573] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 36.981] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 36.981] compiled for 1.4.99.906, module version = 13.25.5
[ 36.981] Module class: X.Org Video Driver
[ 36.981] (II) Loading sub module "fglrxdrm"
[ 36.981] (II) LoadModule: "fglrxdrm"
[ 36.981] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 37.046] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 37.046] compiled for 1.4.99.906, module version = 13.25.5
[ 37.046] (II) AMD Proprietary Linux Driver Version Identifier:13.25.5
[ 37.046] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.25.18
[ 37.046] (II) AMD Proprietary Linux Driver Build Date: Nov 22 2013 09:54:24
[ 37.046] (++) using VT number 7
[ 37.048] (WW) Falling back to old probe method for fglrx
[ 37.118] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 37.137] ukiDynamicMajor: found major device number 249
[ 37.137] ukiDynamicMajor: found major device number 249
[ 37.137] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 37.137] ukiOpenDevice: node name is /dev/ati/card0
[ 37.137] ukiOpenDevice: open result is 10, (OK)
[ 37.390] ukiOpenByBusid: ukiOpenMinor returns 10
[ 37.390] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 37.422] (--) Chipset Supported AMD Graphics Processor (0x68BA) found
[ 37.422] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 1:0:1) found
[ 37.424] (II) fglrx(0): pEnt->device->identifier=0x7f07b58285b0
[ 37.424] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 37.424] (II) Loading sub module "vgahw"
[ 37.424] (II) LoadModule: "vgahw"
[ 37.424] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 37.424] (II) Module vgahw: vendor="X.Org Foundation"
[ 37.424] compiled for 1.14.5, module version = 0.1.0
[ 37.424] ABI class: X.Org Video Driver, version 14.1
[ 37.425] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 37.425] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 37.425] (==) fglrx(0): Default visual is TrueColor
[ 37.425] (==) fglrx(0): RGB weight 888
[ 37.425] (II) fglrx(0): Using 8 bits per RGB
[ 37.425] (==) fglrx(0): Buffer Tiling is ON
[ 37.425] (II) Loading sub module "fglrxdrm"
[ 37.425] (II) LoadModule: "fglrxdrm"
[ 37.425] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 37.425] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 37.425] compiled for 1.4.99.906, module version = 13.25.5
[ 37.427] ukiDynamicMajor: found major device number 249
[ 37.427] ukiDynamicMajor: found major device number 249
[ 37.427] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 37.427] ukiOpenDevice: node name is /dev/ati/card0
[ 37.427] ukiOpenDevice: open result is 12, (OK)
[ 37.427] ukiOpenByBusid: ukiOpenMinor returns 12
[ 37.427] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 37.427] (**) fglrx(0): NoAccel = NO
[ 37.427] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 37.427] (--) fglrx(0): Chipset: "AMD Radeon HD 6700 Series " (Chipset = 0x68ba)
[ 37.427] (--) fglrx(0): (PciSubVendor = 0x1545, PciSubDevice = 0x6770)
[ 37.427] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 37.427] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 37.427] (--) fglrx(0): MMIO registers at 0xf1000000
[ 37.427] (--) fglrx(0): I/O port at 0x0000b000
[ 37.427] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 37.456] (II) fglrx(0): AC Adapter is used
[ 37.520] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 37.775] (II) Loading sub module "vbe"
[ 37.775] (II) LoadModule: "vbe"
[ 37.776] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 37.776] (II) Module vbe: vendor="X.Org Foundation"
[ 37.776] compiled for 1.14.5, module version = 1.1.0
[ 37.776] ABI class: X.Org Video Driver, version 14.1
[ 37.777] (II) fglrx(0): VESA BIOS detected
[ 37.777] (II) fglrx(0): VESA VBE Version 3.0
[ 37.777] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 37.777] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 37.777] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 37.777] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 37.777] (II) fglrx(0): VESA VBE OEM Product: JUNIPER
[ 37.777] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 37.777] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 37.777] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 37.777] (II) fglrx(0): PCIE card detected
[ 37.777] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 37.777] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 37.777] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 37.777] (II) fglrx(0): RandR 1.2 support is enabled!
[ 37.777] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 37.777] (==) fglrx(0): Center Mode is disabled
[ 37.777] (II) Loading sub module "fb"
[ 37.777] (II) LoadModule: "fb"
[ 37.777] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 37.777] (II) Module fb: vendor="X.Org Foundation"
[ 37.777] compiled for 1.14.5, module version = 1.0.0
[ 37.777] ABI class: X.Org ANSI C Emulation, version 0.4
[ 37.777] (II) Loading sub module "ddc"
[ 37.777] (II) LoadModule: "ddc"
[ 37.777] (II) Module "ddc" already built-in
[ 38.288] (II) fglrx(0): Output DFP1 has no monitor section
[ 38.288] (II) fglrx(0): Output DFP2 has no monitor section
[ 38.288] (II) fglrx(0): Output DFP3 using monitor section 0-DFP3
[ 38.288] (**) fglrx(0): Option "PreferredMode" "1600x1200"
[ 38.288] (**) fglrx(0): Option "Position" "1600 0"
[ 38.288] (**) fglrx(0): Option "Disable" "false"
[ 38.288] (**) fglrx(0): Option "Rotate" "normal"
[ 38.288] (**) fglrx(0): Option "TargetRefresh" "60"
[ 38.288] (II) fglrx(0): Output DFP4 using monitor section 0-DFP4
[ 38.288] (**) fglrx(0): Option "PreferredMode" "1600x900"
[ 38.288] (**) fglrx(0): Option "Position" "0 0"
[ 38.288] (**) fglrx(0): Option "Disable" "false"
[ 38.288] (**) fglrx(0): Option "Rotate" "normal"
[ 38.288] (**) fglrx(0): Option "TargetRefresh" "60"
[ 38.288] (II) fglrx(0): Output CRT1 has no monitor section
[ 38.288] (II) fglrx(0): Output CRT2 has no monitor section
[ 38.288] (II) Loading sub module "ddc"
[ 38.288] (II) LoadModule: "ddc"
[ 38.288] (II) Module "ddc" already built-in
[ 38.288] (II) fglrx(0): Connected Display0: DFP3
[ 38.288] (II) fglrx(0): Display0 EDID data ---------------------------
[ 38.288] (II) fglrx(0): Manufacturer: SAM Model: 1ae Serial#: 1112683056
[ 38.288] (II) fglrx(0): Year: 2007 Week: 15
[ 38.288] (II) fglrx(0): EDID Version: 1.3
[ 38.288] (II) fglrx(0): Digital Display Input
[ 38.288] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 31
[ 38.288] (II) fglrx(0): Gamma: 2.20
[ 38.288] (II) fglrx(0): DPMS capabilities: Off
[ 38.288] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 38.288] (II) fglrx(0): First detailed timing is preferred mode
[ 38.288] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 38.288] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 38.288] (II) fglrx(0): Supported established timings:
[ 38.288] (II) fglrx(0): 720x400 at 70Hz
[ 38.288] (II) fglrx(0): 640x480 at 60Hz
[ 38.288] (II) fglrx(0): 640x480 at 67Hz
[ 38.289] (II) fglrx(0): 640x480 at 72Hz
[ 38.289] (II) fglrx(0): 640x480 at 75Hz
[ 38.289] (II) fglrx(0): 800x600 at 56Hz
[ 38.289] (II) fglrx(0): 800x600 at 60Hz
[ 38.289] (II) fglrx(0): 800x600 at 72Hz
[ 38.289] (II) fglrx(0): 800x600 at 75Hz
[ 38.289] (II) fglrx(0): 832x624 at 75Hz
[ 38.289] (II) fglrx(0): 1024x768 at 60Hz
[ 38.289] (II) fglrx(0): 1024x768 at 70Hz
[ 38.289] (II) fglrx(0): 1024x768 at 75Hz
[ 38.289] (II) fglrx(0): 1280x1024 at 75Hz
[ 38.289] (II) fglrx(0): 1152x864 at 75Hz
[ 38.289] (II) fglrx(0): Manufacturer's mask: 0
[ 38.289] (II) fglrx(0): Supported standard timings:
[ 38.289] (II) fglrx(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 38.289] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 38.289] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 38.289] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 38.289] (II) fglrx(0): Supported detailed timing:
[ 38.289] (II) fglrx(0): clock: 162.0 MHz Image Size: 408 x 306 mm
[ 38.289] (II) fglrx(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
[ 38.289] (II) fglrx(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
[ 38.289] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 38.289] (II) fglrx(0): Monitor name: SyncMaster
[ 38.289] (II) fglrx(0): Serial No: HVZP403238
[ 38.289] (II) fglrx(0): EDID (in hex):
[ 38.289] (II) fglrx(0): 00ffffffffffff004c2dae0130325242
[ 38.289] (II) fglrx(0): 0f11010380291f782aee95a3544c9926
[ 38.289] (II) fglrx(0): 0f5054bfef80a94081808140714f0101
[ 38.289] (II) fglrx(0): 010101010101483f403062b0324040c0
[ 38.289] (II) fglrx(0): 130098321100001e000000fd00384b1e
[ 38.289] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 38.289] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 38.289] (II) fglrx(0): 0048565a503430333233380a2020001c
[ 38.289] (II) fglrx(0): End of Display0 EDID data --------------------
[ 38.289] (II) fglrx(0): Connected Display1: DFP4
[ 38.289] (II) fglrx(0): Display1 EDID data ---------------------------
[ 38.289] (II) fglrx(0): Manufacturer: HWP Model: 2903 Serial#: 16843009
[ 38.289] (II) fglrx(0): Year: 2011 Week: 1
[ 38.289] (II) fglrx(0): EDID Version: 1.3
[ 38.289] (II) fglrx(0): Digital Display Input
[ 38.289] (II) fglrx(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 38.289] (II) fglrx(0): Gamma: 2.20
[ 38.289] (II) fglrx(0): DPMS capabilities: Off
[ 38.289] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 38.289] (II) fglrx(0): Default color space is primary color space
[ 38.289] (II) fglrx(0): First detailed timing is preferred mode
[ 38.289] (II) fglrx(0): redX: 0.648 redY: 0.336 greenX: 0.294 greenY: 0.607
[ 38.289] (II) fglrx(0): blueX: 0.145 blueY: 0.064 whiteX: 0.313 whiteY: 0.329
[ 38.289] (II) fglrx(0): Supported established timings:
[ 38.289] (II) fglrx(0): 720x400 at 70Hz
[ 38.289] (II) fglrx(0): 640x480 at 60Hz
[ 38.289] (II) fglrx(0): 800x600 at 60Hz
[ 38.289] (II) fglrx(0): 1024x768 at 60Hz
[ 38.289] (II) fglrx(0): Manufacturer's mask: 0
[ 38.289] (II) fglrx(0): Supported standard timings:
[ 38.289] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 38.289] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 38.289] (II) fglrx(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 38.289] (II) fglrx(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 38.289] (II) fglrx(0): Supported detailed timing:
[ 38.289] (II) fglrx(0): clock: 108.0 MHz Image Size: 443 x 249 mm
[ 38.289] (II) fglrx(0): h_active: 1600 h_sync: 1624 h_sync_end 1704 h_blank_end 1800 h_border: 0
[ 38.289] (II) fglrx(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 1000 v_border: 0
[ 38.289] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[ 38.289] (II) fglrx(0): Monitor name: HP S2031
[ 38.289] (II) fglrx(0): Serial No: 3CQ101QKP1
[ 38.289] (II) fglrx(0): EDID (in hex):
[ 38.289] (II) fglrx(0): 00ffffffffffff0022f0032901010101
[ 38.289] (II) fglrx(0): 01150103802c19782e0625a6564b9b25
[ 38.289] (II) fglrx(0): 105054a1080081c081809500a9c00101
[ 38.289] (II) fglrx(0): 010101010101302a40c8608464301850
[ 38.289] (II) fglrx(0): 1300bbf91000001e000000fd00324c18
[ 38.289] (II) fglrx(0): 5311000a202020202020000000fc0048
[ 38.289] (II) fglrx(0): 502053323033310a20202020000000ff
[ 38.289] (II) fglrx(0): 00334351313031514b50310a2020005a
[ 38.289] (II) fglrx(0): End of Display1 EDID data --------------------
[ 38.289] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 38.290] (II) fglrx(0): EDID for output DFP1
[ 38.290] (II) fglrx(0): EDID for output DFP2
[ 38.290] (II) fglrx(0): EDID for output DFP3
[ 38.290] (II) fglrx(0): Manufacturer: SAM Model: 1ae Serial#: 1112683056
[ 38.290] (II) fglrx(0): Year: 2007 Week: 15
[ 38.290] (II) fglrx(0): EDID Version: 1.3
[ 38.290] (II) fglrx(0): Digital Display Input
[ 38.290] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 31
[ 38.290] (II) fglrx(0): Gamma: 2.20
[ 38.290] (II) fglrx(0): DPMS capabilities: Off
[ 38.290] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 38.290] (II) fglrx(0): First detailed timing is preferred mode
[ 38.290] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 38.290] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 38.290] (II) fglrx(0): Supported established timings:
[ 38.290] (II) fglrx(0): 720x400 at 70Hz
[ 38.290] (II) fglrx(0): 640x480 at 60Hz
[ 38.290] (II) fglrx(0): 640x480 at 67Hz
[ 38.290] (II) fglrx(0): 640x480 at 72Hz
[ 38.290] (II) fglrx(0): 640x480 at 75Hz
[ 38.290] (II) fglrx(0): 800x600 at 56Hz
[ 38.290] (II) fglrx(0): 800x600 at 60Hz
[ 38.290] (II) fglrx(0): 800x600 at 72Hz
[ 38.290] (II) fglrx(0): 800x600 at 75Hz
[ 38.290] (II) fglrx(0): 832x624 at 75Hz
[ 38.290] (II) fglrx(0): 1024x768 at 60Hz
[ 38.290] (II) fglrx(0): 1024x768 at 70Hz
[ 38.290] (II) fglrx(0): 1024x768 at 75Hz
[ 38.290] (II) fglrx(0): 1280x1024 at 75Hz
[ 38.290] (II) fglrx(0): 1152x864 at 75Hz
[ 38.290] (II) fglrx(0): Manufacturer's mask: 0
[ 38.290] (II) fglrx(0): Supported standard timings:
[ 38.290] (II) fglrx(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 38.290] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 38.290] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 38.290] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 38.290] (II) fglrx(0): Supported detailed timing:
[ 38.290] (II) fglrx(0): clock: 162.0 MHz Image Size: 408 x 306 mm
[ 38.290] (II) fglrx(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
[ 38.290] (II) fglrx(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
[ 38.290] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 38.290] (II) fglrx(0): Monitor name: SyncMaster
[ 38.290] (II) fglrx(0): Serial No: HVZP403238
[ 38.290] (II) fglrx(0): EDID (in hex):
[ 38.290] (II) fglrx(0): 00ffffffffffff004c2dae0130325242
[ 38.290] (II) fglrx(0): 0f11010380291f782aee95a3544c9926
[ 38.290] (II) fglrx(0): 0f5054bfef80a94081808140714f0101
[ 38.290] (II) fglrx(0): 010101010101483f403062b0324040c0
[ 38.290] (II) fglrx(0): 130098321100001e000000fd00384b1e
[ 38.290] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 38.290] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 38.290] (II) fglrx(0): 0048565a503430333233380a2020001c
[ 38.290] (II) fglrx(0): User Preference Output DFP3 using refresh rate 60.0 Hz.
[ 38.290] (II) fglrx(0): Printing probed modes for output DFP3
[ 38.290] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz UeP)
[ 38.290] (II) fglrx(0): Modeline "1400x1050"x60.0 162.00 1400 1664 1856 2160 1050 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1600x900"x60.0 162.00 1600 1664 1856 2160 900 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1360x1024"x60.0 162.00 1360 1664 1856 2160 1024 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1440x900"x60.0 162.00 1440 1664 1856 2160 900 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1152x864"x60.0 162.00 1152 1664 1856 2160 864 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 38.290] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 38.290] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 38.290] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 38.290] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 38.290] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 38.290] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 38.290] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 38.290] (II) fglrx(0): Modeline "640x480"x67.0 26.50 640 688 720 800 480 483 487 496 -hsync +vsync (33.1 kHz e)
[ 38.290] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 38.291] (II) fglrx(0): EDID for output DFP4
[ 38.291] (II) fglrx(0): Manufacturer: HWP Model: 2903 Serial#: 16843009
[ 38.291] (II) fglrx(0): Year: 2011 Week: 1
[ 38.291] (II) fglrx(0): EDID Version: 1.3
[ 38.291] (II) fglrx(0): Digital Display Input
[ 38.291] (II) fglrx(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 38.291] (II) fglrx(0): Gamma: 2.20
[ 38.291] (II) fglrx(0): DPMS capabilities: Off
[ 38.291] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 38.291] (II) fglrx(0): Default color space is primary color space
[ 38.291] (II) fglrx(0): First detailed timing is preferred mode
[ 38.291] (II) fglrx(0): redX: 0.648 redY: 0.336 greenX: 0.294 greenY: 0.607
[ 38.291] (II) fglrx(0): blueX: 0.145 blueY: 0.064 whiteX: 0.313 whiteY: 0.329
[ 38.291] (II) fglrx(0): Supported established timings:
[ 38.291] (II) fglrx(0): 720x400 at 70Hz
[ 38.291] (II) fglrx(0): 640x480 at 60Hz
[ 38.291] (II) fglrx(0): 800x600 at 60Hz
[ 38.291] (II) fglrx(0): 1024x768 at 60Hz
[ 38.291] (II) fglrx(0): Manufacturer's mask: 0
[ 38.291] (II) fglrx(0): Supported standard timings:
[ 38.291] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 38.291] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 38.291] (II) fglrx(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 38.291] (II) fglrx(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 38.291] (II) fglrx(0): Supported detailed timing:
[ 38.291] (II) fglrx(0): clock: 108.0 MHz Image Size: 443 x 249 mm
[ 38.291] (II) fglrx(0): h_active: 1600 h_sync: 1624 h_sync_end 1704 h_blank_end 1800 h_border: 0
[ 38.291] (II) fglrx(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 1000 v_border: 0
[ 38.291] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[ 38.291] (II) fglrx(0): Monitor name: HP S2031
[ 38.291] (II) fglrx(0): Serial No: 3CQ101QKP1
[ 38.291] (II) fglrx(0): EDID (in hex):
[ 38.291] (II) fglrx(0): 00ffffffffffff0022f0032901010101
[ 38.291] (II) fglrx(0): 01150103802c19782e0625a6564b9b25
[ 38.291] (II) fglrx(0): 105054a1080081c081809500a9c00101
[ 38.291] (II) fglrx(0): 010101010101302a40c8608464301850
[ 38.291] (II) fglrx(0): 1300bbf91000001e000000fd00324c18
[ 38.291] (II) fglrx(0): 5311000a202020202020000000fc0048
[ 38.291] (II) fglrx(0): 502053323033310a20202020000000ff
[ 38.291] (II) fglrx(0): 00334351313031514b50310a2020005a
[ 38.291] (II) fglrx(0): User Preference Output DFP4 using refresh rate 60.0 Hz.
[ 38.291] (II) fglrx(0): Printing probed modes for output DFP4
[ 38.291] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz UeP)
[ 38.291] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 38.291] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 38.291] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 38.291] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 38.291] (II) fglrx(0): Modeline "1280x720"x60.0 64.00 1280 1328 1360 1440 720 723 728 741 -hsync +vsync (44.4 kHz e)
[ 38.291] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 38.291] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 38.291] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 38.291] (II) fglrx(0): EDID for output CRT1
[ 38.291] (II) fglrx(0): EDID for output CRT2
[ 38.291] (II) fglrx(0): Output DFP1 disconnected
[ 38.291] (II) fglrx(0): Output DFP2 disconnected
[ 38.291] (II) fglrx(0): Output DFP3 connected
[ 38.291] (II) fglrx(0): Output DFP4 connected
[ 38.291] (II) fglrx(0): Output CRT1 disconnected
[ 38.291] (II) fglrx(0): Output CRT2 disconnected
[ 38.291] (II) fglrx(0): Using user preference for initial modes
[ 38.291] (II) fglrx(0): Output DFP3 using initial mode 1600x1200
[ 38.291] (II) fglrx(0): Output DFP4 using initial mode 1600x900
[ 38.291] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 38.291] (II) fglrx(0): DPI set to (96, 96)
[ 38.291] (II) fglrx(0): Eyefinity capable adapter detected.
[ 38.291] (II) fglrx(0): Adapter AMD Radeon HD 6700 Series has 6 configurable heads and 2 displays connected.
[ 38.291] (==) fglrx(0): PseudoColor visuals disabled
[ 38.291] (II) Loading sub module "ramdac"
[ 38.291] (II) LoadModule: "ramdac"
[ 38.291] (II) Module "ramdac" already built-in
[ 38.291] (==) fglrx(0): NoDRI = NO
[ 38.291] (==) fglrx(0): Capabilities: 0x00000000
[ 38.291] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 38.291] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 38.291] (==) fglrx(0): UseFastTLS=0
[ 38.291] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 38.291] (--) Depth 24 pixmap format is 32 bpp
[ 38.291] Loading extension ATIFGLRXDRI
[ 38.291] (II) fglrx(0): doing swlDriScreenInit
[ 38.291] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 38.291] ukiDynamicMajor: found major device number 249
[ 38.291] ukiDynamicMajor: found major device number 249
[ 38.292] ukiDynamicMajor: found major device number 249
[ 38.292] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 38.292] ukiOpenDevice: node name is /dev/ati/card0
[ 38.292] ukiOpenDevice: open result is 13, (OK)
[ 38.292] ukiOpenByBusid: ukiOpenMinor returns 13
[ 38.292] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 38.292] (II) fglrx(0): [uki] DRM interface version 1.0
[ 38.292] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 38.292] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 38.292] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f07b37fd000
[ 38.292] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 38.292] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 38.292] (II) fglrx(0): swlDriScreenInit done
[ 38.292] (II) fglrx(0): Kernel Module Version Information:
[ 38.292] (II) fglrx(0): Name: fglrx
[ 38.292] (II) fglrx(0): Version: 13.25.5
[ 38.292] (II) fglrx(0): Date: Nov 22 2013
[ 38.292] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 38.292] (II) fglrx(0): Kernel Module version matches driver.
[ 38.292] (II) fglrx(0): Kernel Module Build Time Information:
[ 38.292] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.11-2-amd64
[ 38.292] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 38.292] (II) fglrx(0): Build-Kernel __SMP__: no
[ 38.292] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 38.292] (II) fglrx(0): [uki] register handle = 0x00004000
[ 38.314] (II) fglrx(0): DRI initialization successfull
[ 38.314] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x02710000
[ 38.315] (==) fglrx(0): Backing store disabled
[ 38.315] Loading extension FGLRXEXTENSION
[ 38.315] (==) fglrx(0): DPMS enabled
[ 38.315] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 38.315] (**) fglrx(0): Textured Video is enabled.
[ 38.315] (II) LoadModule: "glesx"
[ 38.315] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 38.315] (II) Module glesx: vendor="X.Org Foundation"
[ 38.315] compiled for 1.4.99.906, module version = 1.0.0
[ 38.315] Loading extension GLESX
[ 38.316] (II) fglrx(0): GLESX enableFlags = 592
[ 38.316] (II) fglrx(0): GLESX is enabled
[ 38.316] (II) LoadModule: "amdxmm"
[ 38.316] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 38.316] (II) Module amdxmm: vendor="X.Org Foundation"
[ 38.316] compiled for 1.4.99.906, module version = 2.0.0
[ 38.375] Loading extension AMDXVOPL
[ 38.375] Loading extension AMDXVBA
[ 38.411] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 38.413] (II) fglrx(0): Enable composite support successfully
[ 38.413] (II) fglrx(0): X context handle = 0x1
[ 38.413] (II) fglrx(0): [DRI] installation complete
[ 38.413] (==) fglrx(0): Silken mouse enabled
[ 38.413] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 38.414] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 38.592] (--) RandR disabled
[ 38.596] (II) SELinux: Disabled on system
[ 38.596] ukiDynamicMajor: found major device number 249
[ 38.596] ukiDynamicMajor: found major device number 249
[ 38.596] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 38.596] ukiOpenDevice: node name is /dev/ati/card0
[ 38.596] ukiOpenDevice: open result is 14, (OK)
[ 38.596] ukiOpenByBusid: ukiOpenMinor returns 14
[ 38.596] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 38.596] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 38.596] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 38.596] (EE) AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 38.744] ukiDynamicMajor: found major device number 249
[ 38.744] ukiDynamicMajor: found major device number 249
[ 38.744] ukiDynamicMajor: found major device number 249
[ 38.744] ukiOpenDevice: node name is /dev/ati/card0
[ 38.744] ukiOpenDevice: open result is 15, (OK)
[ 38.744] ukiGetBusid returned 'PCI:1:0:0'
[ 38.744] ukiOpenDevice: node name is /dev/ati/card1
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: Open failed
[ 38.744] ukiOpenDevice: node name is /dev/ati/card2
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: Open failed
[ 38.744] ukiOpenDevice: node name is /dev/ati/card3
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: Open failed
[ 38.744] ukiOpenDevice: node name is /dev/ati/card4
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: Open failed
[ 38.744] ukiOpenDevice: node name is /dev/ati/card5
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: Open failed
[ 38.744] ukiOpenDevice: node name is /dev/ati/card6
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: Open failed
[ 38.744] ukiOpenDevice: node name is /dev/ati/card7
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: Open failed
[ 38.744] ukiOpenDevice: node name is /dev/ati/card8
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: Open failed
[ 38.744] ukiOpenDevice: node name is /dev/ati/card9
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: Open failed
[ 38.744] ukiOpenDevice: node name is /dev/ati/card10
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.744] ukiOpenDevice: Open failed
[ 38.744] ukiOpenDevice: node name is /dev/ati/card11
[ 38.744] ukiOpenDevice: open result is -1, (No such device)
[ 38.745] ukiOpenDevice: open result is -1, (No such device)
[ 38.745] ukiOpenDevice: Open failed
[ 38.745] ukiOpenDevice: node name is /dev/ati/card12
[ 38.745] ukiOpenDevice: open result is -1, (No such device)
[ 38.745] ukiOpenDevice: open result is -1, (No such device)
[ 38.745] ukiOpenDevice: Open failed
[ 38.745] ukiOpenDevice: node name is /dev/ati/card13
[ 38.745] ukiOpenDevice: open result is -1, (No such device)
[ 38.745] ukiOpenDevice: open result is -1, (No such device)
[ 38.745] ukiOpenDevice: Open failed
[ 38.745] ukiOpenDevice: node name is /dev/ati/card14
[ 38.745] ukiOpenDevice: open result is -1, (No such device)
[ 38.745] ukiOpenDevice: open result is -1, (No such device)
[ 38.745] ukiOpenDevice: Open failed
[ 38.745] ukiOpenDevice: node name is /dev/ati/card15
[ 38.745] ukiOpenDevice: open result is -1, (No such device)
[ 38.745] ukiOpenDevice: open result is -1, (No such device)
[ 38.745] ukiOpenDevice: Open failed
[ 38.745] ukiDynamicMajor: found major device number 249
[ 38.745] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 38.745] ukiOpenDevice: node name is /dev/ati/card0
[ 38.745] ukiOpenDevice: open result is 15, (OK)
[ 38.745] ukiOpenByBusid: ukiOpenMinor returns 15
[ 38.745] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 39.111] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 39.112] ukiDynamicMajor: found major device number 249
[ 39.112] ukiDynamicMajor: found major device number 249
[ 39.112] ukiDynamicMajor: found major device number 249
[ 39.112] ukiOpenDevice: node name is /dev/ati/card0
[ 39.112] ukiOpenDevice: open result is 16, (OK)
[ 39.112] ukiGetBusid returned 'PCI:1:0:0'
[ 39.112] ukiOpenDevice: node name is /dev/ati/card1
[ 39.112] ukiOpenDevice: open result is -1, (No such device)
[ 39.112] ukiOpenDevice: open result is -1, (No such device)
[ 39.112] ukiOpenDevice: Open failed
[ 39.112] ukiOpenDevice: node name is /dev/ati/card2
[ 39.112] ukiOpenDevice: open result is -1, (No such device)
[ 39.112] ukiOpenDevice: open result is -1, (No such device)
[ 39.112] ukiOpenDevice: Open failed
[ 39.112] ukiOpenDevice: node name is /dev/ati/card3
[ 39.112] ukiOpenDevice: open result is -1, (No such device)
[ 39.112] ukiOpenDevice: open result is -1, (No such device)
[ 39.112] ukiOpenDevice: Open failed
[ 39.112] ukiOpenDevice: node name is /dev/ati/card4
[ 39.112] ukiOpenDevice: open result is -1, (No such device)
[ 39.112] ukiOpenDevice: open result is -1, (No such device)
[ 39.112] ukiOpenDevice: Open failed
[ 39.112] ukiOpenDevice: node name is /dev/ati/card5
[ 39.112] ukiOpenDevice: open result is -1, (No such device)
[ 39.112] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiOpenDevice: node name is /dev/ati/card6
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiOpenDevice: node name is /dev/ati/card7
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiOpenDevice: node name is /dev/ati/card8
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiOpenDevice: node name is /dev/ati/card9
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiOpenDevice: node name is /dev/ati/card10
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiOpenDevice: node name is /dev/ati/card11
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiOpenDevice: node name is /dev/ati/card12
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiOpenDevice: node name is /dev/ati/card13
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiOpenDevice: node name is /dev/ati/card14
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiOpenDevice: node name is /dev/ati/card15
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: open result is -1, (No such device)
[ 39.113] ukiOpenDevice: Open failed
[ 39.113] ukiDynamicMajor: found major device number 249
[ 39.113] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 39.113] ukiOpenDevice: node name is /dev/ati/card0
[ 39.113] ukiOpenDevice: open result is 16, (OK)
[ 39.113] ukiOpenByBusid: ukiOpenMinor returns 16
[ 39.113] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 39.121] (II) fglrx(0): OverDrive5 Detected!
[ 39.137] (II) fglrx(0): Setting screen physical size to 846 x 317
[ 39.642] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 39.642] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 39.642] (II) LoadModule: "evdev"
[ 39.642] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.656] (II) Module evdev: vendor="X.Org Foundation"
[ 39.656] compiled for 1.14.3, module version = 2.8.2
[ 39.656] Module class: X.Org XInput Driver
[ 39.656] ABI class: X.Org XInput driver, version 19.1
[ 39.656] (II) Using input driver 'evdev' for 'Power Button'
[ 39.656] (**) Power Button: always reports core events
[ 39.656] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 39.656] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 39.657] (--) evdev: Power Button: Found keys
[ 39.657] (II) evdev: Power Button: Configuring as keyboard
[ 39.657] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 39.657] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 39.657] (**) Option "xkb_rules" "evdev"
[ 39.657] (**) Option "xkb_model" "pc104"
[ 39.657] (**) Option "xkb_layout" "us"
[ 39.674] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 39.674] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 39.674] (II) Using input driver 'evdev' for 'Power Button'
[ 39.674] (**) Power Button: always reports core events
[ 39.674] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 39.674] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 39.675] (--) evdev: Power Button: Found keys
[ 39.675] (II) evdev: Power Button: Configuring as keyboard
[ 39.675] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 39.675] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 39.675] (**) Option "xkb_rules" "evdev"
[ 39.675] (**) Option "xkb_model" "pc104"
[ 39.675] (**) Option "xkb_layout" "us"
[ 39.675] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event1)
[ 39.675] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 39.675] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 39.675] (**) Logitech Trackball: always reports core events
[ 39.675] (**) evdev: Logitech Trackball: Device: "/dev/input/event1"
[ 39.675] (--) evdev: Logitech Trackball: Vendor 0x46d Product 0xc404
[ 39.675] (--) evdev: Logitech Trackball: Found 3 mouse buttons
[ 39.675] (--) evdev: Logitech Trackball: Found scroll wheel(s)
[ 39.675] (--) evdev: Logitech Trackball: Found relative axes
[ 39.675] (--) evdev: Logitech Trackball: Found x and y relative axes
[ 39.675] (II) evdev: Logitech Trackball: Configuring as mouse
[ 39.675] (II) evdev: Logitech Trackball: Adding scrollwheel support
[ 39.675] (**) evdev: Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 39.675] (**) evdev: Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 39.675] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input1/event1"
[ 39.675] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE, id 8)
[ 39.675] (II) evdev: Logitech Trackball: initialized for relative axes.
[ 39.675] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 39.675] (**) Logitech Trackball: (accel) acceleration profile 0
[ 39.675] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 39.675] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 39.676] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 39.676] (II) No input driver specified, ignoring this device.
[ 39.676] (II) This device may have been added with another device file.
[ 39.676] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event10)
[ 39.676] (II) No input driver specified, ignoring this device.
[ 39.676] (II) This device may have been added with another device file.
[ 39.676] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event11)
[ 39.676] (II) No input driver specified, ignoring this device.
[ 39.676] (II) This device may have been added with another device file.
[ 39.676] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event12)
[ 39.677] (II) No input driver specified, ignoring this device.
[ 39.677] (II) This device may have been added with another device file.
[ 39.677] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event13)
[ 39.677] (II) No input driver specified, ignoring this device.
[ 39.677] (II) This device may have been added with another device file.
[ 39.677] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event5)
[ 39.677] (II) No input driver specified, ignoring this device.
[ 39.677] (II) This device may have been added with another device file.
[ 39.677] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event6)
[ 39.677] (II) No input driver specified, ignoring this device.
[ 39.677] (II) This device may have been added with another device file.
[ 39.678] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event7)
[ 39.678] (II) No input driver specified, ignoring this device.
[ 39.678] (II) This device may have been added with another device file.
[ 39.678] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
[ 39.678] (II) No input driver specified, ignoring this device.
[ 39.678] (II) This device may have been added with another device file.
[ 39.678] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event9)
[ 39.678] (II) No input driver specified, ignoring this device.
[ 39.678] (II) This device may have been added with another device file.
[ 39.678] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 39.678] (II) No input driver specified, ignoring this device.
[ 39.678] (II) This device may have been added with another device file.
[ 39.679] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 39.679] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 39.679] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 39.679] (**) AT Translated Set 2 keyboard: always reports core events
[ 39.679] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 39.679] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 39.679] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 39.679] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 39.679] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 39.679] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 39.679] (**) Option "xkb_rules" "evdev"
[ 39.679] (**) Option "xkb_model" "pc104"
[ 39.679] (**) Option "xkb_layout" "us"
[ 39.679] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 39.679] (II) No input driver specified, ignoring this device.
[ 39.679] (II) This device may have been added with another device file.
[ 39.686] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 54.022] (II) fglrx(0): User Preference Output DFP3 using refresh rate 60.0 Hz.
[ 54.022] (II) fglrx(0): EDID vendor "HWP", prod id 10499
[ 54.022] (II) fglrx(0): Using EDID range info for horizontal sync
[ 54.022] (II) fglrx(0): Using EDID range info for vertical refresh
[ 54.022] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.022] (II) fglrx(0): Modeline "1600x900"x0.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP)
[ 54.022] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 54.022] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 54.022] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 54.022] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 54.022] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 54.022] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 54.022] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 54.022] (II) fglrx(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 54.022] (II) fglrx(0): User Preference Output DFP4 using refresh rate 60.0 Hz.
[ 56.011] (II) fglrx(0): User Preference Output DFP3 using refresh rate 60.0 Hz.
[ 56.011] (II) fglrx(0): EDID vendor "HWP", prod id 10499
[ 56.011] (II) fglrx(0): Using hsync ranges from config file
[ 56.011] (II) fglrx(0): Using vrefresh ranges from config file
[ 56.011] (II) fglrx(0): Printing DDC gathered Modelines:
[ 56.011] (II) fglrx(0): Modeline "1600x900"x0.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP)
[ 56.011] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 56.011] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 56.011] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 56.011] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 56.011] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 56.011] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 56.011] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 56.011] (II) fglrx(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 56.011] (II) fglrx(0): User Preference Output DFP4 using refresh rate 60.0 Hz.
[ 58.456] (II) fglrx(0): User Preference Output DFP3 using refresh rate 60.0 Hz.
[ 58.456] (II) fglrx(0): EDID vendor "HWP", prod id 10499
[ 58.456] (II) fglrx(0): Using hsync ranges from config file
[ 58.456] (II) fglrx(0): Using vrefresh ranges from config file
[ 58.456] (II) fglrx(0): Printing DDC gathered Modelines:
[ 58.456] (II) fglrx(0): Modeline "1600x900"x0.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP)
[ 58.456] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 58.456] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 58.456] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 58.456] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 58.456] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 58.456] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 58.456] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 58.456] (II) fglrx(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 58.456] (II) fglrx(0): User Preference Output DFP4 using refresh rate 60.0 Hz.
Bug script output from package glx-alternative-fglrx:
Diversions:
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/libGL.so.1.2.0 to /usr/lib/mesa-diverted/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions
/usr/lib/mesa-diverted:
total 88
drwxr-xr-x 5 root root 4096 Sep 12 19:44 .
dr-xr-xr-x 235 root root 69632 Dec 28 14:04 ..
drwxr-xr-x 2 root root 4096 Aug 17 00:15 arm-linux-gnueabihf
drwxr-xr-x 2 root root 4096 Dec 28 00:55 i386-linux-gnu
drwxr-xr-x 2 root root 4096 Dec 28 00:55 x86_64-linux-gnu
/usr/lib/mesa-diverted/i386-linux-gnu/:
total 360
drwxr-xr-x 2 root root 4096 Dec 28 00:55 .
drwxr-xr-x 5 root root 4096 Sep 12 19:44 ..
lrwxrwxrwx 1 root root 14 Oct 22 06:44 libGL.so.1 -> libGL.so.1.2.0
-rw-r--r-- 1 root root 357836 Oct 22 06:44 libGL.so.1.2.0
/usr/lib/mesa-diverted/x86_64-linux-gnu/:
total 380
drwxr-xr-x 2 root root 4096 Dec 28 00:55 .
drwxr-xr-x 5 root root 4096 Sep 12 19:44 ..
lrwxrwxrwx 1 root root 14 Oct 22 05:18 libGL.so.1 -> libGL.so.1.2.0
-rw-r--r-- 1 root root 380808 Oct 22 05:18 libGL.so.1.2.0
Alternative 'glx':
glx - auto mode
link currently points to /usr/lib/fglrx
/usr/lib/fglrx - priority 99
slave glx--fglrx-blacklists-radeon.conf: /etc/ati/fglrx-blacklists-radeon.conf
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libGL.so.1-i386-linux-gnu: /usr/lib/i386-linux-gnu/fglrx/libGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
slave glx--linux-libglx.so: /usr/lib/fglrx/fglrx-libglx.so
/usr/lib/fglrx/igpu - priority 90
slave glx--fglrx-blacklists-radeon.conf: /etc/ati/fglrx-blacklists-radeon.conf
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libGL.so.1-i386-linux-gnu: /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
slave glx--linux-libglx.so: /usr/lib/fglrx/fglrx-libglx.so
/usr/lib/mesa-diverted - priority 5
slave glx--libGL.so.1-i386-linux-gnu: /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
Current 'best' version is '/usr/lib/fglrx'.
lrwxrwxrwx 1 root root 14 Dec 27 16:09 /etc/alternatives/glx -> /usr/lib/fglrx
lrwxrwxrwx 1 root root 37 Dec 27 16:09 /etc/alternatives/glx--fglrx-blacklists-radeon.conf -> /etc/ati/fglrx-blacklists-radeon.conf
lrwxrwxrwx 1 root root 27 Dec 27 16:09 /etc/alternatives/glx--fglrx_drv.so -> /usr/lib/fglrx/fglrx_drv.so
lrwxrwxrwx 1 root root 40 Dec 27 16:09 /etc/alternatives/glx--libGL.so.1-i386-linux-gnu -> /usr/lib/i386-linux-gnu/fglrx/libGL.so.1
lrwxrwxrwx 1 root root 42 Dec 27 16:09 /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
lrwxrwxrwx 1 root root 30 Dec 27 16:09 /etc/alternatives/glx--linux-libglx.so -> /usr/lib/fglrx/fglrx-libglx.so
File System:
lrwxrwxrwx 1 root root 21 Sep 12 19:45 /usr/lib/glx -> /etc/alternatives/glx
lrwxrwxrwx 1 root root 48 Dec 27 16:09 /usr/lib/i386-linux-gnu/libGL.so.1 -> /etc/alternatives/glx--libGL.so.1-i386-linux-gnu
lrwxrwxrwx 1 root root 50 Sep 12 19:45 /usr/lib/x86_64-linux-gnu/libGL.so.1 -> /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu
-rw-r--r-- 1 root root 435568 Dec 13 05:14 /usr/lib/xorg/modules/extensions/libglx.so
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.11-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages fglrx-control depends on:
ii fglrx-driver 1:13.11~betav9.4-1
ii libc6 2.17-97
ii libgcc1 1:4.8.2-10
ii libgl1-mesa-glx [libgl1] 9.2.2-1
ii libqtcore4 4:4.8.5+git192-g085f851+dfsg-2
ii libqtgui4 4:4.8.5+git192-g085f851+dfsg-2
ii libstdc++6 4.8.2-10
ii libx11-6 2:1.6.2-1
ii libxext6 2:1.3.2-1
ii libxinerama1 2:1.1.3-1
ii libxrandr2 2:1.4.1-1
fglrx-control recommends no packages.
fglrx-control suggests no packages.
-- no debconf information
More information about the Pkg-fglrx-devel
mailing list