[Pkg-fglrx-devel] Bug#765109: fglrx-driver: Black screen after xorg startup
Evan Benn
evanbenn at gmail.com
Fri Dec 5 23:35:11 UTC 2014
Package: fglrx-driver
Version: 1:14.9+ga14.201-2
Followup-For: Bug #765109
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
New computer, installed fresh debian 7, installed fglrx-driver.
Graphics card not supported (R9 270X). Upgraded to jessie.
ran ati-config --initial. Black screen on startup.
Tried a posted method of adding "File" field to xorg.conf.
Still Black screen. I can swap to terminal (ctrl-alt-f1).
-- Package-specific info:
Full fglrx package list:
ii fglrx-atievent 1:14.9+ga14. amd64 events daemon for the non-free AT
ii fglrx-driver 1:14.9+ga14. amd64 non-free ATI/AMD RadeonHD display
ii fglrx-modules- 1:14.9+ga14. amd64 dkms module source for the non-fr
ii libfglrx:amd64 1:14.9+ga14. amd64 non-free ATI/AMD RadeonHD display
ii libfglrx-amdxv 1:14.9+ga14. amd64 AMD XvBA (X-Video Bitstream Accel
ii libgl1-fglrx-g 1:14.9+ga14. amd64 proprietary libGL for the non-fre
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Curacao XT [Radeon R9 270X] [1002:6810] (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:9275]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f7e00000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at f7e40000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
DRM and fglrx Informations from dmesg:
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.528841] Linux agpgart interface v0.103
[ 1.719181] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 1.742019] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7723 MBytes.
[ 1.742097] <6>[fglrx] vendor: 1002 device: 6810 count: 1
[ 1.742232] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 1.742364] <6>[fglrx] Kernel PAT support is enabled
[ 1.742374] <6>[fglrx] module loaded - fglrx 14.20.7 [Sep 2 2014] with 1 minors
[ 4.573759] fglrx_pci 0000:01:00.0: irq 49 for MSI/MSI-X
[ 4.574139] <6>[fglrx] Firegl kernel thread PID: 1038
[ 4.574270] <6>[fglrx] Firegl kernel thread PID: 1039
[ 4.574388] <6>[fglrx] Firegl kernel thread PID: 1040
[ 4.574460] <6>[fglrx] IRQ 49 Enabled
[ 4.582095] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 4.582097] <6>[fglrx] Reserved FB block: Unshared offset:f838000, size:4000
[ 4.582098] <6>[fglrx] Reserved FB block: Unshared offset:f83c000, size:4c4000
[ 4.582099] <6>[fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 804 Dec 6 10:24 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "Files"
ModulePath "/usr/lib/fglrx"
ModulePath "/usr/lib/xorg/modules"
ModulePath "/usr/lib/dri"
EndSection
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 21054 Dec 6 10:09 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 21054 Dec 6 10:09 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 21054 Dec 6 10:09 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 21054 Dec 6 10:09 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 21054 Dec 6 10:09 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 46544 Dec 6 10:26 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 2155.959]
X.Org X Server 1.16.1.901 (1.16.2 RC 1)
Release Date: 2014-11-02
[ 2155.959] X Protocol Version 11, Revision 0
[ 2155.959] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 2155.959] Current Operating System: Linux evanpc 3.16.0-4-amd64 #1 SMP Debian 3.16.7-2 (2014-11-06) x86_64
[ 2155.960] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/evanpc-root ro initrd=/install/initrd.gz quiet
[ 2155.960] Build Date: 03 November 2014 09:44:08PM
[ 2155.960] xorg-server 2:1.16.1.901-1 (http://www.debian.org/support)
[ 2155.960] Current version of pixman: 0.32.6
[ 2155.960] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2155.960] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2155.960] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 6 10:25:05 2014
[ 2155.960] (==) Using config file: "/etc/X11/xorg.conf"
[ 2155.960] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2155.960] (==) ServerLayout "aticonfig Layout"
[ 2155.960] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2155.960] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2155.960] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2155.960] (==) Automatically adding devices
[ 2155.960] (==) Automatically enabling devices
[ 2155.960] (==) Automatically adding GPU devices
[ 2155.960] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 2155.960] Entry deleted from font path.
[ 2155.960] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 2155.960] (**) ModulePath set to "/usr/lib/fglrx,/usr/lib/xorg/modules,/usr/lib/dri"
[ 2155.960] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2155.960] (II) Loader magic: 0x7f9c48860d80
[ 2155.960] (II) Module ABI versions:
[ 2155.960] X.Org ANSI C Emulation: 0.4
[ 2155.960] X.Org Video Driver: 18.0
[ 2155.960] X.Org XInput driver : 21.0
[ 2155.960] X.Org Server Extension : 8.0
[ 2155.961] (--) PCI:*(0:1:0:0) 1002:6810:1682:9275 rev 0, Mem @ 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 2155.961] (II) "glx" will be loaded by default.
[ 2155.961] (II) LoadModule: "glx"
[ 2155.961] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 2155.961] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2155.961] compiled for 6.9.0, module version = 1.0.0
[ 2155.961] (II) LoadModule: "fglrx"
[ 2155.961] (II) Loading /usr/lib/fglrx/fglrx_drv.so
[ 2155.972] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2155.972] compiled for 1.4.99.906, module version = 14.20.7
[ 2155.973] Module class: X.Org Video Driver
[ 2155.973] (II) Loading sub module "fglrxdrm"
[ 2155.973] (II) LoadModule: "fglrxdrm"
[ 2155.973] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2155.973] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2155.973] compiled for 1.4.99.906, module version = 14.20.7
[ 2155.973] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 2155.973] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002
[ 2155.973] (II) AMD Proprietary Linux Driver Build Date: Sep 2 2014 10:14:55
[ 2155.973] (++) using VT number 7
[ 2155.980] (WW) Falling back to old probe method for fglrx
[ 2155.983] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2155.984] ukiDynamicMajor: found major device number 250
[ 2155.984] ukiDynamicMajor: found major device number 250
[ 2155.984] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2155.984] ukiOpenDevice: node name is /dev/ati/card0
[ 2155.984] ukiOpenDevice: open result is 9, (OK)
[ 2155.984] ukiOpenByBusid: ukiOpenMinor returns 9
[ 2155.984] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2155.985] (--) Chipset Supported AMD Graphics Processor (0x6810) found
[ 2155.985] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 1:0:1) found
[ 2155.985] (II) fglrx(0): pEnt->device->identifier=0x7f9c4a2463c0
[ 2155.985] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[ 2155.985] (II) Loading sub module "vgahw"
[ 2155.985] (II) LoadModule: "vgahw"
[ 2155.985] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2155.985] (II) Module vgahw: vendor="X.Org Foundation"
[ 2155.985] compiled for 1.16.1.901, module version = 0.1.0
[ 2155.985] ABI class: X.Org Video Driver, version 18.0
[ 2155.986] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2155.986] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2155.986] (==) fglrx(0): Default visual is TrueColor
[ 2155.986] (**) fglrx(0): Option "DPMS" "true"
[ 2155.986] (==) fglrx(0): RGB weight 888
[ 2155.986] (II) fglrx(0): Using 8 bits per RGB
[ 2155.986] (==) fglrx(0): Buffer Tiling is ON
[ 2155.986] (II) Loading sub module "fglrxdrm"
[ 2155.986] (II) LoadModule: "fglrxdrm"
[ 2155.986] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2155.986] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2155.986] compiled for 1.4.99.906, module version = 14.20.7
[ 2155.987] ukiDynamicMajor: found major device number 250
[ 2155.987] ukiDynamicMajor: found major device number 250
[ 2155.987] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2155.987] ukiOpenDevice: node name is /dev/ati/card0
[ 2155.987] ukiOpenDevice: open result is 11, (OK)
[ 2155.987] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2155.987] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2155.987] (**) fglrx(0): NoAccel = NO
[ 2155.987] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2155.987] (--) fglrx(0): Chipset: "AMD Radeon R9 200 Series" (Chipset = 0x6810)
[ 2155.987] (--) fglrx(0): (PciSubVendor = 0x1682, PciSubDevice = 0x9275)
[ 2155.987] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2155.987] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 2155.987] (--) fglrx(0): MMIO registers at 0xf7e00000
[ 2155.987] (--) fglrx(0): I/O port at 0x0000e000
[ 2155.987] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2155.987] (II) fglrx(0): AC Adapter is used
[ 2155.987] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2156.118] (II) Loading sub module "vbe"
[ 2156.118] (II) LoadModule: "vbe"
[ 2156.118] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2156.118] (II) Module vbe: vendor="X.Org Foundation"
[ 2156.118] compiled for 1.16.1.901, module version = 1.1.0
[ 2156.118] ABI class: X.Org Video Driver, version 18.0
[ 2156.118] (II) fglrx(0): VESA BIOS detected
[ 2156.118] (II) fglrx(0): VESA VBE Version 3.0
[ 2156.118] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2156.118] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2156.118] (II) fglrx(0): VESA VBE OEM Software Rev: 15.42
[ 2156.118] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 2156.118] (II) fglrx(0): VESA VBE OEM Product: CURACAO
[ 2156.118] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2156.118] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2156.118] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 2156.118] (II) fglrx(0): PCIE card detected
[ 2156.118] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2156.118] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2156.118] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 2156.118] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2156.118] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2156.118] (II) Loading sub module "fb"
[ 2156.118] (II) LoadModule: "fb"
[ 2156.118] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2156.118] (II) Module fb: vendor="X.Org Foundation"
[ 2156.118] compiled for 1.16.1.901, module version = 1.0.0
[ 2156.118] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2156.118] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 2156.118] (II) Loading sub module "ddc"
[ 2156.118] (II) LoadModule: "ddc"
[ 2156.118] (II) Module "ddc" already built-in
[ 2156.216] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2156.216] (II) fglrx(0): Output DFP2 has no monitor section
[ 2156.216] (II) fglrx(0): Output DFP3 has no monitor section
[ 2156.216] (II) fglrx(0): Output DFP4 has no monitor section
[ 2156.216] (II) fglrx(0): Output DFP5 has no monitor section
[ 2156.216] (II) fglrx(0): Output DFP6 has no monitor section
[ 2156.216] (II) fglrx(0): Output DFP7 has no monitor section
[ 2156.216] (II) fglrx(0): Output CRT1 has no monitor section
[ 2156.216] (II) Loading sub module "ddc"
[ 2156.216] (II) LoadModule: "ddc"
[ 2156.216] (II) Module "ddc" already built-in
[ 2156.216] (II) fglrx(0): Connected Display0: DFP7
[ 2156.216] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2156.216] (II) fglrx(0): Manufacturer: BNQ Model: 7726 Serial#: 21573
[ 2156.216] (II) fglrx(0): Year: 2008 Week: 46
[ 2156.216] (II) fglrx(0): EDID Version: 1.3
[ 2156.216] (II) fglrx(0): Digital Display Input
[ 2156.216] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 2156.216] (II) fglrx(0): Gamma: 2.20
[ 2156.216] (II) fglrx(0): DPMS capabilities: Off
[ 2156.216] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2156.216] (II) fglrx(0): Default color space is primary color space
[ 2156.216] (II) fglrx(0): First detailed timing is preferred mode
[ 2156.216] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.282 greenY: 0.603
[ 2156.216] (II) fglrx(0): blueX: 0.143 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
[ 2156.216] (II) fglrx(0): Supported established timings:
[ 2156.216] (II) fglrx(0): 720x400 at 70Hz
[ 2156.216] (II) fglrx(0): 640x480 at 60Hz
[ 2156.216] (II) fglrx(0): 640x480 at 75Hz
[ 2156.216] (II) fglrx(0): 800x600 at 60Hz
[ 2156.216] (II) fglrx(0): 800x600 at 75Hz
[ 2156.216] (II) fglrx(0): 1024x768 at 60Hz
[ 2156.216] (II) fglrx(0): 1024x768 at 75Hz
[ 2156.216] (II) fglrx(0): 1280x1024 at 75Hz
[ 2156.216] (II) fglrx(0): Manufacturer's mask: 0
[ 2156.216] (II) fglrx(0): Supported standard timings:
[ 2156.216] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 2156.216] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2156.216] (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 2156.216] (II) fglrx(0): Supported detailed timing:
[ 2156.216] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 2156.216] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2156.216] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2156.216] (II) fglrx(0): Serial No: AB811335SL0
[ 2156.216] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 2156.216] (II) fglrx(0): Monitor name: BenQ T2200HD
[ 2156.216] (II) fglrx(0): EDID (in hex):
[ 2156.216] (II) fglrx(0): 00ffffffffffff0009d1267745540000
[ 2156.216] (II) fglrx(0): 2e12010380301b782e3581a656489a24
[ 2156.216] (II) fglrx(0): 125054a54b00714f8180d1c001010101
[ 2156.216] (II) fglrx(0): 010101010101023a801871382d40582c
[ 2156.216] (II) fglrx(0): 4500dd0c1100001e000000ff00414238
[ 2156.216] (II) fglrx(0): 3131333335534c300a0a000000fd0038
[ 2156.216] (II) fglrx(0): 4c1e5311000a202020202020000000fc
[ 2156.216] (II) fglrx(0): 0042656e5120543232303048440a0025
[ 2156.216] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2156.216] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 2156.217] (II) fglrx(0): EDID for output DFP1
[ 2156.217] (II) fglrx(0): EDID for output DFP2
[ 2156.217] (II) fglrx(0): EDID for output DFP3
[ 2156.217] (II) fglrx(0): EDID for output DFP4
[ 2156.217] (II) fglrx(0): EDID for output DFP5
[ 2156.217] (II) fglrx(0): EDID for output DFP6
[ 2156.217] (II) fglrx(0): EDID for output DFP7
[ 2156.217] (II) fglrx(0): Manufacturer: BNQ Model: 7726 Serial#: 21573
[ 2156.217] (II) fglrx(0): Year: 2008 Week: 46
[ 2156.217] (II) fglrx(0): EDID Version: 1.3
[ 2156.217] (II) fglrx(0): Digital Display Input
[ 2156.217] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 2156.217] (II) fglrx(0): Gamma: 2.20
[ 2156.217] (II) fglrx(0): DPMS capabilities: Off
[ 2156.217] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2156.217] (II) fglrx(0): Default color space is primary color space
[ 2156.217] (II) fglrx(0): First detailed timing is preferred mode
[ 2156.217] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.282 greenY: 0.603
[ 2156.217] (II) fglrx(0): blueX: 0.143 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
[ 2156.217] (II) fglrx(0): Supported established timings:
[ 2156.217] (II) fglrx(0): 720x400 at 70Hz
[ 2156.217] (II) fglrx(0): 640x480 at 60Hz
[ 2156.217] (II) fglrx(0): 640x480 at 75Hz
[ 2156.217] (II) fglrx(0): 800x600 at 60Hz
[ 2156.217] (II) fglrx(0): 800x600 at 75Hz
[ 2156.217] (II) fglrx(0): 1024x768 at 60Hz
[ 2156.217] (II) fglrx(0): 1024x768 at 75Hz
[ 2156.217] (II) fglrx(0): 1280x1024 at 75Hz
[ 2156.217] (II) fglrx(0): Manufacturer's mask: 0
[ 2156.217] (II) fglrx(0): Supported standard timings:
[ 2156.217] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 2156.217] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2156.217] (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 2156.217] (II) fglrx(0): Supported detailed timing:
[ 2156.217] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 2156.217] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2156.217] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2156.217] (II) fglrx(0): Serial No: AB811335SL0
[ 2156.217] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 2156.217] (II) fglrx(0): Monitor name: BenQ T2200HD
[ 2156.217] (II) fglrx(0): EDID (in hex):
[ 2156.217] (II) fglrx(0): 00ffffffffffff0009d1267745540000
[ 2156.217] (II) fglrx(0): 2e12010380301b782e3581a656489a24
[ 2156.217] (II) fglrx(0): 125054a54b00714f8180d1c001010101
[ 2156.217] (II) fglrx(0): 010101010101023a801871382d40582c
[ 2156.217] (II) fglrx(0): 4500dd0c1100001e000000ff00414238
[ 2156.217] (II) fglrx(0): 3131333335534c300a0a000000fd0038
[ 2156.217] (II) fglrx(0): 4c1e5311000a202020202020000000fc
[ 2156.217] (II) fglrx(0): 0042656e5120543232303048440a0025
[ 2156.217] (II) fglrx(0): Printing probed modes for output DFP7
[ 2156.217] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 2156.217] (II) fglrx(0): Modeline "1680x1050"x60.0 148.50 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1400x1050"x60.0 148.50 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1600x900"x60.0 148.50 1600 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1440x900"x60.0 148.50 1440 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1152x864"x60.0 148.50 1152 2008 2052 2200 864 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2156.217] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2156.217] (II) fglrx(0): EDID for output CRT1
[ 2156.217] (II) fglrx(0): Output DFP1 disconnected
[ 2156.217] (II) fglrx(0): Output DFP2 disconnected
[ 2156.217] (II) fglrx(0): Output DFP3 disconnected
[ 2156.217] (II) fglrx(0): Output DFP4 disconnected
[ 2156.217] (II) fglrx(0): Output DFP5 disconnected
[ 2156.217] (II) fglrx(0): Output DFP6 disconnected
[ 2156.217] (II) fglrx(0): Output DFP7 connected
[ 2156.217] (II) fglrx(0): Output CRT1 disconnected
[ 2156.217] (II) fglrx(0): Using exact sizes for initial modes
[ 2156.217] (II) fglrx(0): Output DFP7 using initial mode 1920x1080
[ 2156.217] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2156.217] (II) fglrx(0): DPI set to (96, 96)
[ 2156.217] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2156.217] (II) fglrx(0): Adapter AMD Radeon R9 200 Series has 6 configurable heads and 1 displays connected.
[ 2156.217] (==) fglrx(0): PseudoColor visuals disabled
[ 2156.217] (II) Loading sub module "ramdac"
[ 2156.217] (II) LoadModule: "ramdac"
[ 2156.217] (II) Module "ramdac" already built-in
[ 2156.217] (==) fglrx(0): NoDRI = NO
[ 2156.217] (==) fglrx(0): Capabilities: 0x00000000
[ 2156.217] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2156.217] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2156.217] (==) fglrx(0): UseFastTLS=0
[ 2156.218] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 2156.218] (--) Depth 24 pixmap format is 32 bpp
[ 2156.218] (II) fglrx(0): doing swlDriScreenInit
[ 2156.218] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2156.218] ukiDynamicMajor: found major device number 250
[ 2156.218] ukiDynamicMajor: found major device number 250
[ 2156.218] ukiDynamicMajor: found major device number 250
[ 2156.218] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2156.218] ukiOpenDevice: node name is /dev/ati/card0
[ 2156.218] ukiOpenDevice: open result is 12, (OK)
[ 2156.218] ukiOpenByBusid: ukiOpenMinor returns 12
[ 2156.218] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2156.218] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2156.218] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 2156.218] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x20c000
[ 2156.218] (II) fglrx(0): [uki] mapped SAREA 0x20c000 to 0x7f9c4841b000
[ 2156.218] (II) fglrx(0): [uki] framebuffer handle = 0x20d000
[ 2156.218] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2156.218] (II) fglrx(0): swlDriScreenInit done
[ 2156.218] (II) fglrx(0): Kernel Module Version Information:
[ 2156.218] (II) fglrx(0): Name: fglrx
[ 2156.218] (II) fglrx(0): Version: 14.20.7
[ 2156.218] (II) fglrx(0): Date: Sep 2 2014
[ 2156.218] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 2156.218] (II) fglrx(0): Kernel Module version matches driver.
[ 2156.218] (II) fglrx(0): Kernel Module Build Time Information:
[ 2156.218] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.16.0-4-amd64
[ 2156.218] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 2156.218] (II) fglrx(0): Build-Kernel __SMP__: no
[ 2156.218] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2156.218] (II) fglrx(0): [uki] register handle = 0x0020e000
[ 2156.218] (II) fglrx(0): DRI initialization successfull
[ 2156.218] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010e0000
[ 2156.218] (==) fglrx(0): Backing store enabled
[ 2156.218] (**) fglrx(0): DPMS enabled
[ 2156.218] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2156.218] (**) fglrx(0): Textured Video is enabled.
[ 2156.218] (II) LoadModule: "glesx"
[ 2156.218] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 2156.219] (II) Module glesx: vendor="X.Org Foundation"
[ 2156.219] compiled for 1.4.99.906, module version = 1.0.0
[ 2156.219] (II) fglrx(0): GLESX enableFlags = 8784
[ 2156.219] (II) fglrx(0): GLESX is enabled
[ 2156.219] (II) LoadModule: "amdxmm"
[ 2156.219] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 2156.219] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2156.219] compiled for 1.4.99.906, module version = 2.0.0
[ 2156.242] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 2156.243] (II) fglrx(0): Enable composite support successfully
[ 2156.243] (WW) fglrx(0): Option "VendorName" is not used
[ 2156.243] (WW) fglrx(0): Option "ModelName" is not used
[ 2156.243] (II) fglrx(0): X context handle = 0x4
[ 2156.243] (II) fglrx(0): [DRI] installation complete
[ 2156.244] (==) fglrx(0): Silken mouse enabled
[ 2156.244] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2156.244] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2156.367] (--) RandR disabled
[ 2156.370] (II) SELinux: Disabled on system
[ 2156.370] ukiDynamicMajor: found major device number 250
[ 2156.370] ukiDynamicMajor: found major device number 250
[ 2156.370] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2156.370] ukiOpenDevice: node name is /dev/ati/card0
[ 2156.370] ukiOpenDevice: open result is 13, (OK)
[ 2156.370] ukiOpenByBusid: ukiOpenMinor returns 13
[ 2156.370] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2156.370] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 2156.370] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 2156.370] (EE) AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 2156.372] ukiDynamicMajor: found major device number 250
[ 2156.372] ukiDynamicMajor: found major device number 250
[ 2156.372] ukiDynamicMajor: found major device number 250
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card0
[ 2156.372] ukiOpenDevice: open result is 14, (OK)
[ 2156.372] ukiGetBusid returned 'PCI:1:0:0'
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card1
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card2
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card3
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card4
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card5
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card6
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card7
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card8
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card9
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card10
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card11
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card12
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card13
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card14
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card15
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: open result is -1, (No such device)
[ 2156.372] ukiOpenDevice: Open failed
[ 2156.372] ukiDynamicMajor: found major device number 250
[ 2156.372] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2156.372] ukiOpenDevice: node name is /dev/ati/card0
[ 2156.372] ukiOpenDevice: open result is 14, (OK)
[ 2156.372] ukiOpenByBusid: ukiOpenMinor returns 14
[ 2156.372] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2156.386] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 2156.386] ukiDynamicMajor: found major device number 250
[ 2156.386] ukiDynamicMajor: found major device number 250
[ 2156.386] ukiDynamicMajor: found major device number 250
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card0
[ 2156.386] ukiOpenDevice: open result is 15, (OK)
[ 2156.386] ukiGetBusid returned 'PCI:1:0:0'
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card1
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card2
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card3
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card4
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card5
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card6
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card7
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card8
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card9
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card10
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.386] ukiOpenDevice: node name is /dev/ati/card11
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: open result is -1, (No such device)
[ 2156.386] ukiOpenDevice: Open failed
[ 2156.387] ukiOpenDevice: node name is /dev/ati/card12
[ 2156.387] ukiOpenDevice: open result is -1, (No such device)
[ 2156.387] ukiOpenDevice: open result is -1, (No such device)
[ 2156.387] ukiOpenDevice: Open failed
[ 2156.387] ukiOpenDevice: node name is /dev/ati/card13
[ 2156.387] ukiOpenDevice: open result is -1, (No such device)
[ 2156.387] ukiOpenDevice: open result is -1, (No such device)
[ 2156.387] ukiOpenDevice: Open failed
[ 2156.387] ukiOpenDevice: node name is /dev/ati/card14
[ 2156.387] ukiOpenDevice: open result is -1, (No such device)
[ 2156.387] ukiOpenDevice: open result is -1, (No such device)
[ 2156.387] ukiOpenDevice: Open failed
[ 2156.387] ukiOpenDevice: node name is /dev/ati/card15
[ 2156.387] ukiOpenDevice: open result is -1, (No such device)
[ 2156.387] ukiOpenDevice: open result is -1, (No such device)
[ 2156.387] ukiOpenDevice: Open failed
[ 2156.387] ukiDynamicMajor: found major device number 250
[ 2156.387] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2156.387] ukiOpenDevice: node name is /dev/ati/card0
[ 2156.387] ukiOpenDevice: open result is 15, (OK)
[ 2156.387] ukiOpenByBusid: ukiOpenMinor returns 15
[ 2156.387] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2156.393] (II) fglrx(0): OverDrive5 Detected!
[ 2156.397] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 2156.414] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2156.414] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2156.414] (II) LoadModule: "evdev"
[ 2156.414] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2156.414] (II) Module evdev: vendor="X.Org Foundation"
[ 2156.414] compiled for 1.16.0, module version = 2.9.0
[ 2156.414] Module class: X.Org XInput Driver
[ 2156.414] ABI class: X.Org XInput driver, version 21.0
[ 2156.414] (II) Using input driver 'evdev' for 'Power Button'
[ 2156.414] (**) Power Button: always reports core events
[ 2156.414] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2156.414] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2156.414] (--) evdev: Power Button: Found keys
[ 2156.414] (II) evdev: Power Button: Configuring as keyboard
[ 2156.414] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event2"
[ 2156.414] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2156.414] (**) Option "xkb_rules" "evdev"
[ 2156.414] (**) Option "xkb_model" "pc105"
[ 2156.414] (**) Option "xkb_layout" "us"
[ 2156.415] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 2156.415] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2156.415] (II) Using input driver 'evdev' for 'Power Button'
[ 2156.415] (**) Power Button: always reports core events
[ 2156.415] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 2156.415] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2156.415] (--) evdev: Power Button: Found keys
[ 2156.415] (II) evdev: Power Button: Configuring as keyboard
[ 2156.415] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 2156.415] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2156.415] (**) Option "xkb_rules" "evdev"
[ 2156.415] (**) Option "xkb_model" "pc105"
[ 2156.415] (**) Option "xkb_layout" "us"
[ 2156.415] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 2156.415] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2156.415] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2156.415] (**) Sleep Button: always reports core events
[ 2156.415] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 2156.415] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2156.415] (--) evdev: Sleep Button: Found keys
[ 2156.415] (II) evdev: Sleep Button: Configuring as keyboard
[ 2156.415] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event1"
[ 2156.415] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 2156.415] (**) Option "xkb_rules" "evdev"
[ 2156.415] (**) Option "xkb_model" "pc105"
[ 2156.415] (**) Option "xkb_layout" "us"
[ 2156.415] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event8)
[ 2156.415] (II) No input driver specified, ignoring this device.
[ 2156.415] (II) This device may have been added with another device file.
[ 2156.415] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event3)
[ 2156.415] (II) No input driver specified, ignoring this device.
[ 2156.415] (II) This device may have been added with another device file.
[ 2156.415] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event4)
[ 2156.415] (II) No input driver specified, ignoring this device.
[ 2156.415] (II) This device may have been added with another device file.
[ 2156.415] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event5)
[ 2156.415] (II) No input driver specified, ignoring this device.
[ 2156.415] (II) This device may have been added with another device file.
[ 2156.416] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event6)
[ 2156.416] (II) No input driver specified, ignoring this device.
[ 2156.416] (II) This device may have been added with another device file.
[ 2156.416] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event7)
[ 2156.416] (II) No input driver specified, ignoring this device.
[ 2156.416] (II) This device may have been added with another device file.
[ 2156.416] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event15)
[ 2156.416] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2156.416] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 2156.416] (**) Logitech USB Optical Mouse: always reports core events
[ 2156.416] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event15"
[ 2156.416] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 2156.416] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 2156.416] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 2156.416] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 2156.416] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 2156.416] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 2156.416] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 2156.416] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2156.416] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2156.416] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C05A.000B/input/input28/event15"
[ 2156.416] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 2156.416] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 2156.416] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 2156.416] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 2156.416] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 2156.416] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 2156.416] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 2156.416] (II) No input driver specified, ignoring this device.
[ 2156.416] (II) This device may have been added with another device file.
[ 2156.416] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event16)
[ 2156.416] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2156.416] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 2156.417] (**) Logitech USB Keyboard: always reports core events
[ 2156.417] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event16"
[ 2156.417] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 2156.417] (--) evdev: Logitech USB Keyboard: Found keys
[ 2156.417] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 2156.417] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C31C.0002/input/input19/event16"
[ 2156.417] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 2156.417] (**) Option "xkb_rules" "evdev"
[ 2156.417] (**) Option "xkb_model" "pc105"
[ 2156.417] (**) Option "xkb_layout" "us"
[ 2156.417] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event17)
[ 2156.417] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2156.417] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 2156.417] (**) Logitech USB Keyboard: always reports core events
[ 2156.417] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event17"
[ 2156.417] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 2156.417] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 2156.417] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 2156.417] (--) evdev: Logitech USB Keyboard: Found keys
[ 2156.417] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 2156.417] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 2156.417] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 2156.417] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C31C.0003/input/input20/event17"
[ 2156.417] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[ 2156.417] (**) Option "xkb_rules" "evdev"
[ 2156.417] (**) Option "xkb_model" "pc105"
[ 2156.417] (**) Option "xkb_layout" "us"
[ 2156.417] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 2156.417] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 2156.417] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 2156.417] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 2156.417] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 2156.417] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 2156.417] (II) No input driver specified, ignoring this device.
[ 2156.417] (II) This device may have been added with another device file.
[ 2156.417] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 2156.417] (II) No input driver specified, ignoring this device.
[ 2156.417] (II) This device may have been added with another device file.
[ 2156.417] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 2156.417] (II) No input driver specified, ignoring this device.
[ 2156.417] (II) This device may have been added with another device file.
[ 2156.418] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event13)
[ 2156.418] (II) No input driver specified, ignoring this device.
[ 2156.418] (II) This device may have been added with another device file.
[ 2156.418] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[ 2156.418] (II) No input driver specified, ignoring this device.
[ 2156.418] (II) This device may have been added with another device file.
[ 2156.418] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 2156.418] (II) No input driver specified, ignoring this device.
[ 2156.418] (II) This device may have been added with another device file.
[ 2156.421] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 2156.608] (II) fglrx(0): EDID vendor "BNQ", prod id 30502
[ 2156.608] (II) fglrx(0): Using EDID range info for horizontal sync
[ 2156.608] (II) fglrx(0): Using EDID range info for vertical refresh
[ 2156.608] (II) fglrx(0): Printing DDC gathered Modelines:
[ 2156.608] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 2156.608] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2156.608] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2156.608] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2156.608] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 2156.608] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2156.608] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2156.608] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2156.608] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2156.608] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2156.608] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2156.608] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 2187.172] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2187.172] (II) fglrx(0): Backup framebuffer data.
[ 2187.185] (II) fglrx(0): Backup complete.
[ 2247.104] (II) config/udev: removing device Logitech USB Optical Mouse
[ 2247.104] (II) evdev: Logitech USB Optical Mouse: Close
[ 2247.104] (II) UnloadModule: "evdev"
[ 2248.746] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 2248.746] (II) No input driver specified, ignoring this device.
[ 2248.746] (II) This device may have been added with another device file.
[ 2248.746] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event15)
[ 2248.746] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2248.746] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 2248.746] (**) Logitech USB Optical Mouse: always reports core events
[ 2248.746] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event15"
[ 2248.764] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 2248.764] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 2248.764] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 2248.764] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 2248.764] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 2248.764] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 2248.764] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 2248.764] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2248.764] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2248.764] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C05A.000C/input/input29/event15"
[ 2248.764] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 2248.764] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 2248.764] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 2248.764] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 2248.764] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 2248.764] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
Bug script output from package glx-alternative-fglrx:
Diversions:
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/libGL.so.1.2.0 to /usr/lib/mesa-diverted/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so to /usr/lib/mesa-diverted/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so to /usr/lib/mesa-diverted/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGLESv2.so.2 to /usr/lib/mesa-diverted/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
/usr/lib/mesa-diverted:
total 56
drwxr-xr-x 5 root root 4096 Dec 6 08:37 .
drwxr-xr-x 185 root root 36864 Dec 6 10:10 ..
drwxr-xr-x 2 root root 4096 Oct 22 10:08 arm-linux-gnueabihf
drwxr-xr-x 2 root root 4096 Jun 30 2012 i386-linux-gnu
drwxr-xr-x 2 root root 4096 Dec 6 09:36 x86_64-linux-gnu
/usr/lib/mesa-diverted/i386-linux-gnu/:
total 8
drwxr-xr-x 2 root root 4096 Jun 30 2012 .
drwxr-xr-x 5 root root 4096 Dec 6 08:37 ..
/usr/lib/mesa-diverted/x86_64-linux-gnu/:
total 796
drwxr-xr-x 2 root root 4096 Dec 6 09:36 .
drwxr-xr-x 5 root root 4096 Dec 6 08:37 ..
lrwxrwxrwx 1 root root 15 Oct 27 22:44 libEGL.so.1 -> libEGL.so.1.0.0
-rw-r--r-- 1 root root 173144 Oct 27 22:44 libEGL.so.1.0.0
lrwxrwxrwx 1 root root 14 Oct 27 22:44 libGL.so.1 -> libGL.so.1.2.0
-rw-r--r-- 1 root root 627320 Oct 27 22:44 libGL.so.1.2.0
Alternative 'glx':
glx - auto mode
link currently points to /usr/lib/fglrx
/usr/lib/fglrx - priority 99
slave glx--fglrx-blacklists-radeon.conf: /etc/ati/fglrx-blacklists-radeon.conf
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libEGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
slave glx--linux-libglx.so: /usr/lib/fglrx/fglrx-libglx.so
/usr/lib/fglrx/igpu - priority 90
slave glx--fglrx-blacklists-radeon.conf: /etc/ati/fglrx-blacklists-radeon.conf
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libEGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
/usr/lib/mesa-diverted - priority 5
slave glx--libEGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
Current 'best' version is '/usr/lib/fglrx'.
lrwxrwxrwx 1 root root 14 Dec 6 10:10 /etc/alternatives/glx -> /usr/lib/fglrx
lrwxrwxrwx 1 root root 37 Dec 6 10:10 /etc/alternatives/glx--fglrx-blacklists-radeon.conf -> /etc/ati/fglrx-blacklists-radeon.conf
lrwxrwxrwx 1 root root 27 Dec 6 10:10 /etc/alternatives/glx--fglrx_drv.so -> /usr/lib/fglrx/fglrx_drv.so
lrwxrwxrwx 1 root root 51 Dec 6 10:10 /etc/alternatives/glx--libEGL.so.1-x86_64-linux-gnu -> /usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
lrwxrwxrwx 1 root root 42 Dec 6 10:10 /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
lrwxrwxrwx 1 root root 30 Dec 6 10:10 /etc/alternatives/glx--linux-libglx.so -> /usr/lib/fglrx/fglrx-libglx.so
File System:
lrwxrwxrwx 1 root root 21 Dec 5 21:10 /usr/lib/glx -> /etc/alternatives/glx
lrwxrwxrwx 1 root root 50 Dec 5 21:10 /usr/lib/x86_64-linux-gnu/libGL.so.1 -> /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu
-rw-r--r-- 1 root root 286120 Nov 4 08:52 /usr/lib/xorg/modules/extensions/libglx.so
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages fglrx-driver depends on:
ii debconf [debconf-2.0] 1.5.54
ii glx-alternative-fglrx 0.5.1
ii libc6 2.19-13
ii libfglrx 1:14.9+ga14.201-2
ii libgl1-mesa-glx [libgl1] 10.3.2-1
ii libx11-6 2:1.6.2-3
ii libxext6 2:1.3.3-1
ii libxrandr2 2:1.4.2-1+b1
ii libxrender1 1:0.9.8-1+b1
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.1.901-1
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:14.9+ga14.201-2
ii fglrx-modules-dkms [fglrx-kernel-14.9+ga14.201] 1:14.9+ga14.201-2
ii libgl1-fglrx-glx 1:14.9+ga14.201-2
pn libgl1-fglrx-glx-i386 <none>
Versions of packages fglrx-driver suggests:
pn amd-opencl-icd <none>
pn fglrx-control <none>
pn xvba-va-driver <none>
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.19-13
ii libdrm-intel1 2.4.58-2
ii libdrm2 2.4.58-2
ii libpciaccess0 0.13.2-3
ii libpixman-1-0 0.32.6-3
ii libudev1 215-7
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb-dri2-0 1.10-3+b1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.10-3+b1
ii libxv1 2:1.0.10-1+b1
ii libxvmc1 2:1.0.8-2+b1
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.1.901-1
Versions of packages fglrx-driver is related to:
pn ia32-libs <none>
ii libdrm-radeon1 2.4.58-2
ii linux-headers-3.2.0-4-amd64 [linux-headers] 3.2.63-2
ii xserver-xorg 1:7.7+7
ii xserver-xorg-core 2:1.16.1.901-1
ii xserver-xorg-video-ati 1:7.5.0-1
ii xserver-xorg-video-radeon 1:7.5.0-1
-- Configuration Files:
/etc/ati/atiogl.xml ed0f507ebb4c7c6f4eca90818771fdd3 [Errno 2] No such file or directory: u'/etc/ati/atiogl.xml ed0f507ebb4c7c6f4eca90818771fdd3'
-- debconf information:
* fglrx-driver/needs-xorg-conf-to-enable:
fglrx-driver/removed-but-enabled-in-xorg-conf:
fglrx-driver/check-xorg-conf-on-removal: true
More information about the Pkg-fglrx-devel
mailing list