[Pkg-fglrx-devel] Bug#734864: fglrx-driver: Starting X with fglrx as selected driver results in a, segmentation fault and black screen on boot.
Florian Junghanns
florian.junghanns at gmail.com
Fri Jan 10 14:01:19 UTC 2014
Package: fglrx-driver
Version: 1:13.12-1
Severity: important
Dear Maintainer,
I installed fglrx-driver and ran aticonfig --initial afterwards. I
restarted and got a black screen, without possibility to switch
over to a virtual console (Ctrl+Alt+F1). After rebooting into
recovery mode, I also tried the minimal config as described in
https://wiki.debian.org/ATIProprietary#Manual_Xserver_\
Configuration_File_Creation
Log Files are taken from the attempt with the aticonfig xorg.conf.
Please note: This is a laptop with switchable graphics (integrated
Intel and dedicated AMD card). For this test however the integrated
Intel card was deactivated via BIOS configuration.
(Laptop Model: Acer Aspire 5820TG)
Thank you for your time and effort.
Best regards,
Florian
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'testing-updates'), (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.12-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages fglrx-driver depends on:
ii debconf [debconf-2.0] 1.5.52
ii glx-alternative-fglrx 0.4.1
ii libc6 2.17-97
ii libfglrx:amd64 1:13.12-1
ii libfglrx:i386 1:13.12-1
ii libgl1-mesa-glx [libgl1] 9.2.2-1
ii libx11-6 2:1.6.2-1
ii libxext6 2:1.3.2-1
ii libxrandr2 2:1.4.1-1
ii libxrender1 1:0.9.8-1
ii xserver-xorg-core [xorg-video-abi-14] 2:1.14.5-1
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:13.12-1
ii fglrx-modules-dkms 1:13.12-1
ii libgl1-fglrx-glx:amd64 1:13.12-1
ii libgl1-fglrx-glx:i386 1:13.12-1
ii libgl1-fglrx-glx-i386 1:13.12-1
Versions of packages fglrx-driver suggests:
pn amd-opencl-icd <none>
pn fglrx-control <none>
pn xvba-va-driver <none>
-- Log: Xorg.0.log
[ 47.703]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 47.703] X Protocol Version 11, Revision 0
[ 47.703] Build Operating System: Linux 3.13.0-rc2-patser+ x86_64 Debian
[ 47.703] Current Operating System: Linux boindil 3.12-1-amd64 #1 SMP
Debian 3.12.6-2 (2013-12-29) x86_64
[ 47.703] Kernel command line: BOOT_IMAGE=/vmlinuz-3.12-1-amd64
root=/dev/mapper/ssd--debian--crypt-root ro quiet
[ 47.703] Build Date: 13 December 2013 10:12:53AM
[ 47.703] xorg-server 2:1.14.5-1 (Maarten Lankhorst
<maarten.lankhorst at ubuntu.com>)
[ 47.703] Current version of pixman: 0.32.4
[ 47.703] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 47.703] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 47.703] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 10
12:57:06 2014
[ 47.705] (==) Using config file: "/etc/X11/xorg.conf"
[ 47.705] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 47.705] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 47.709] (==) ServerLayout "aticonfig Layout"
[ 47.709] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 47.709] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 47.709] (**) | |-->Device "aticonfig-Device[0]-0"
[ 47.709] (==) Automatically adding devices
[ 47.709] (==) Automatically enabling devices
[ 47.709] (==) Automatically adding GPU devices
[ 47.716] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 47.716] Entry deleted from font path.
[ 47.727] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 47.727] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 47.727] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 47.727] (II) Loader magic: 0x7f499c887d00
[ 47.727] (II) Module ABI versions:
[ 47.727] X.Org ANSI C Emulation: 0.4
[ 47.727] X.Org Video Driver: 14.1
[ 47.727] X.Org XInput driver : 19.1
[ 47.727] X.Org Server Extension : 7.0
[ 47.728] (--) PCI:*(0:1:0:0) 1002:68c1:1025:052c rev 0, Mem @
0xc0000000/134217728, 0xcc000000/131072, I/O @ 0x00003000/256, BIOS @
0x????????/131072
[ 47.728] (II) Open ACPI successful (/var/run/acpid.socket)
[ 47.729] Initializing built-in extension Generic Event Extension
[ 47.729] Initializing built-in extension SHAPE
[ 47.729] Initializing built-in extension MIT-SHM
[ 47.729] Initializing built-in extension XInputExtension
[ 47.729] Initializing built-in extension XTEST
[ 47.729] Initializing built-in extension BIG-REQUESTS
[ 47.729] Initializing built-in extension SYNC
[ 47.729] Initializing built-in extension XKEYBOARD
[ 47.729] Initializing built-in extension XC-MISC
[ 47.729] Initializing built-in extension SECURITY
[ 47.729] Initializing built-in extension XINERAMA
[ 47.729] Initializing built-in extension XFIXES
[ 47.729] Initializing built-in extension RENDER
[ 47.729] Initializing built-in extension RANDR
[ 47.729] Initializing built-in extension COMPOSITE
[ 47.729] Initializing built-in extension DAMAGE
[ 47.729] Initializing built-in extension MIT-SCREEN-SAVER
[ 47.729] Initializing built-in extension DOUBLE-BUFFER
[ 47.729] Initializing built-in extension RECORD
[ 47.729] Initializing built-in extension DPMS
[ 47.729] Initializing built-in extension X-Resource
[ 47.729] Initializing built-in extension XVideo
[ 47.729] Initializing built-in extension XVideo-MotionCompensation
[ 47.729] Initializing built-in extension SELinux
[ 47.729] Initializing built-in extension XFree86-VidModeExtension
[ 47.729] Initializing built-in extension XFree86-DGA
[ 47.729] Initializing built-in extension XFree86-DRI
[ 47.729] Initializing built-in extension DRI2
[ 47.729] (II) "glx" will be loaded by default.
[ 47.729] (II) LoadModule: "glx"
[ 47.730] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 47.737] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 47.737] compiled for 6.9.0, module version = 1.0.0
[ 47.737] Loading extension GLX
[ 47.737] (II) LoadModule: "fglrx"
[ 47.739] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 47.898] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 47.898] compiled for 1.4.99.906, module version = 13.25.5
[ 47.898] Module class: X.Org Video Driver
[ 47.898] (II) Loading sub module "fglrxdrm"
[ 47.898] (II) LoadModule: "fglrxdrm"
[ 47.898] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 47.901] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 47.901] compiled for 1.4.99.906, module version = 13.25.5
[ 47.901] (II) AMD Proprietary Linux Driver Version Identifier:13.25.5
[ 47.901] (II) AMD Proprietary Linux Driver Release Identifier:
13.251
[ 47.901] (II) AMD Proprietary Linux Driver Build Date: Dec 6 2013
15:19:03
[ 47.901] (++) using VT number 7
[ 47.903] (WW) Falling back to old probe method for fglrx
[ 47.930] (II) Loading PCS database from /etc/ati/amdpcsdb
/etc/ati/amdpcsdb.default
[ 47.935] ukiDynamicMajor: found major device number 249
[ 47.935] ukiDynamicMajor: found major device number 249
[ 47.935] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 47.935] ukiOpenDevice: node name is /dev/ati/card0
[ 47.935] ukiOpenDevice: open result is 10, (OK)
[ 48.079] ukiOpenDevice: open result is 10, (OK)
[ 48.079] ukiOpenByBusid: ukiOpenMinor returns 10
[ 48.079] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 48.084] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[ 48.086] (WW) fglrx: No matching Device section for instance (BusID
PCI:0 at 1:0:1) found
[ 48.088] (II) fglrx(0): pEnt->device->identifier=0x7f499df21180
[ 48.088] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 48.088] (II) Loading sub module "vgahw"
[ 48.088] (II) LoadModule: "vgahw"
[ 48.089] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 48.090] (II) Module vgahw: vendor="X.Org Foundation"
[ 48.090] compiled for 1.14.5, module version = 0.1.0
[ 48.090] ABI class: X.Org Video Driver, version 14.1
[ 48.091] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 48.091] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32
bpp pixmaps)
[ 48.091] (==) fglrx(0): Default visual is TrueColor
[ 48.091] (**) fglrx(0): Option "DPMS" "true"
[ 48.091] (==) fglrx(0): RGB weight 888
[ 48.091] (II) fglrx(0): Using 8 bits per RGB
[ 48.091] (==) fglrx(0): Buffer Tiling is ON
[ 48.091] (II) Loading sub module "fglrxdrm"
[ 48.091] (II) LoadModule: "fglrxdrm"
[ 48.091] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 48.091] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 48.091] compiled for 1.4.99.906, module version = 13.25.5
[ 48.093] ukiDynamicMajor: found major device number 249
[ 48.093] ukiDynamicMajor: found major device number 249
[ 48.093] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 48.093] ukiOpenDevice: node name is /dev/ati/card0
[ 48.093] ukiOpenDevice: open result is 12, (OK)
[ 48.093] ukiOpenByBusid: ukiOpenMinor returns 12
[ 48.093] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 48.094] (**) fglrx(0): NoAccel = NO
[ 48.094] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 48.094] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700
Series" (Chipset = 0x68c1)
[ 48.094] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x052c)
[ 48.094] (==) fglrx(0): board vendor info: third party graphics
adapter - NOT original AMD
[ 48.094] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 48.094] (--) fglrx(0): MMIO registers at 0xcc000000
[ 48.094] (--) fglrx(0): I/O port at 0x00003000
[ 48.094] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 48.097] (II) fglrx(0): AC Adapter is used
[ 48.102] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 48.193] (II) Loading sub module "vbe"
[ 48.193] (II) LoadModule: "vbe"
[ 48.193] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 48.195] (II) Module vbe: vendor="X.Org Foundation"
[ 48.195] compiled for 1.14.5, module version = 1.1.0
[ 48.195] ABI class: X.Org Video Driver, version 14.1
[ 48.198] (II) fglrx(0): VESA BIOS detected
[ 48.198] (II) fglrx(0): VESA VBE Version 3.0
[ 48.198] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 48.198] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 48.198] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 48.198] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI
Technologies Inc.
[ 48.198] (II) fglrx(0): VESA VBE OEM Product: CAPILANO
[ 48.198] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 48.198] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 48.198] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 48.198] (II) fglrx(0): PCIE card detected
[ 48.198] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 48.198] (WW) fglrx(0): board is an unknown third party board,
chipset is supported
[ 48.198] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000,
MCFBSize = 0x40000000)
[ 48.198] (II) fglrx(0): RandR 1.2 support is enabled!
[ 48.198] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 48.198] (==) fglrx(0): Center Mode is disabled
[ 48.198] (II) Loading sub module "fb"
[ 48.198] (II) LoadModule: "fb"
[ 48.198] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 48.203] (II) Module fb: vendor="X.Org Foundation"
[ 48.203] compiled for 1.14.5, module version = 1.0.0
[ 48.203] ABI class: X.Org ANSI C Emulation, version 0.4
[ 48.203] (II) Loading sub module "ddc"
[ 48.203] (II) LoadModule: "ddc"
[ 48.203] (II) Module "ddc" already built-in
[ 48.357] (II) fglrx(0): Output LVDS using monitor section
aticonfig-Monitor[0]-0
[ 48.357] (II) fglrx(0): Output DFP1 has no monitor section
[ 48.358] (II) fglrx(0): Output CRT1 has no monitor section
[ 48.358] (II) Loading sub module "ddc"
[ 48.358] (II) LoadModule: "ddc"
[ 48.358] (II) Module "ddc" already built-in
[ 48.358] (II) fglrx(0): Connected Display0: LVDS
[ 48.358] (II) fglrx(0): Display0 EDID data ---------------------------
[ 48.358] (II) fglrx(0): Manufacturer: AUO Model: 40ec Serial#: 1
[ 48.358] (II) fglrx(0): Year: 2009 Week: 1
[ 48.358] (II) fglrx(0): EDID Version: 1.3
[ 48.358] (II) fglrx(0): Digital Display Input
[ 48.358] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 48.358] (II) fglrx(0): Gamma: 2.20
[ 48.358] (II) fglrx(0): No DPMS capabilities specified
[ 48.358] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[ 48.358] (II) fglrx(0): First detailed timing is preferred mode
[ 48.358] (II) fglrx(0): redX: 0.577 redY: 0.333 greenX: 0.333
greenY: 0.554
[ 48.358] (II) fglrx(0): blueX: 0.161 blueY: 0.144 whiteX: 0.313
whiteY: 0.329
[ 48.358] (II) fglrx(0): Manufacturer's mask: 0
[ 48.358] (II) fglrx(0): Supported detailed timing:
[ 48.358] (II) fglrx(0): clock: 71.9 MHz Image Size: 344 x 193 mm
[ 48.358] (II) fglrx(0): h_active: 1366 h_sync: 1374 h_sync_end
1384 h_blank_end 1544 h_border: 0
[ 48.358] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 772
v_blanking: 776 v_border: 0
[ 48.358] (II) fglrx(0): Unknown vendor-specific block f
[ 48.358] (II) fglrx(0): AUO
[ 48.358] (II) fglrx(0): B156XW04 V0
[ 48.358] (II) fglrx(0): EDID (in hex):
[ 48.358] (II) fglrx(0): 00ffffffffffff0006afec4001000000
[ 48.358] (II) fglrx(0): 01130103802213780ad7759355558d29
[ 48.358] (II) fglrx(0): 24505400000001010101010101010101
[ 48.358] (II) fglrx(0): 010101010101151c56b250000830080a
[ 48.358] (II) fglrx(0): 310058c1100000180000000f00000000
[ 48.358] (II) fglrx(0): 00000000000000000020000000fe0041
[ 48.358] (II) fglrx(0): 554f0a202020202020202020000000fe
[ 48.358] (II) fglrx(0): 004231353658573034205630200a007e
[ 48.358] (II) fglrx(0): End of Display0 EDID data --------------------
[ 48.358] (II) fglrx(0): Connected Display1: CRT1
[ 48.358] (II) fglrx(0): Display1 EDID data ---------------------------
[ 48.358] (II) fglrx(0): Manufacturer: BNQ Model: 8001 Serial#: 21573
[ 48.358] (II) fglrx(0): Year: 2012 Week: 7
[ 48.358] (II) fglrx(0): EDID Version: 1.3
[ 48.358] (II) fglrx(0): Analog Display Input, Input Voltage Level:
0.700/0.300 V
[ 48.358] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 48.358] (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 48.358] (II) fglrx(0): Gamma: 2.20
[ 48.358] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 48.358] (II) fglrx(0): Default color space is primary color space
[ 48.358] (II) fglrx(0): First detailed timing is preferred mode
[ 48.358] (II) fglrx(0): redX: 0.643 redY: 0.339 greenX: 0.329
greenY: 0.624
[ 48.358] (II) fglrx(0): blueX: 0.155 blueY: 0.048 whiteX: 0.313
whiteY: 0.329
[ 48.358] (II) fglrx(0): Supported established timings:
[ 48.358] (II) fglrx(0): 640x480 at 60Hz
[ 48.358] (II) fglrx(0): 800x600 at 60Hz
[ 48.358] (II) fglrx(0): 1024x768 at 60Hz
[ 48.358] (II) fglrx(0): Manufacturer's mask: 0
[ 48.358] (II) fglrx(0): Supported standard timings:
[ 48.358] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60
vid: 129
[ 48.358] (II) fglrx(0): #1: hsize: 1280 vsize 720 refresh: 60
vid: 49281
[ 48.358] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60
vid: 32897
[ 48.358] (II) fglrx(0): #3: hsize: 1600 vsize 900 refresh: 60
vid: 49321
[ 48.358] (II) fglrx(0): #4: hsize: 1680 vsize 1050 refresh: 60
vid: 179
[ 48.358] (II) fglrx(0): #5: hsize: 1920 vsize 1080 refresh: 60
vid: 49361
[ 48.358] (II) fglrx(0): Supported detailed timing:
[ 48.358] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 48.358] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end
2052 h_blank_end 2200 h_border: 0
[ 48.359] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end
1089 v_blanking: 1125 v_border: 0
[ 48.359] (II) fglrx(0): Serial No: B2C04055SL0
[ 48.359] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H
max: 83 kHz, PixClock max 175 MHz
[ 48.359] (II) fglrx(0): Monitor name: BenQ BL2400
[ 48.359] (II) fglrx(0): EDID (in hex):
[ 48.359] (II) fglrx(0): 00ffffffffffff0009d1018045540000
[ 48.359] (II) fglrx(0): 071601030e351e782eb7d5a456549f27
[ 48.359] (II) fglrx(0): 0c5054210800810081c08180a9c0b300
[ 48.359] (II) fglrx(0): d1c001010101023a801871382d40582c
[ 48.359] (II) fglrx(0): 4500dd0c1100001e000000ff00423243
[ 48.359] (II) fglrx(0): 3034303535534c300a20000000fd0032
[ 48.359] (II) fglrx(0): 4c1e5311000a202020202020000000fc
[ 48.359] (II) fglrx(0): 0042656e5120424c323430300a2000be
[ 48.359] (II) fglrx(0): End of Display1 EDID data --------------------
[ 48.359] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 48.360] (II) fglrx(0): EDID for output LVDS
[ 48.360] (II) fglrx(0): Manufacturer: AUO Model: 40ec Serial#: 1
[ 48.360] (II) fglrx(0): Year: 2009 Week: 1
[ 48.360] (II) fglrx(0): EDID Version: 1.3
[ 48.360] (II) fglrx(0): Digital Display Input
[ 48.360] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 48.360] (II) fglrx(0): Gamma: 2.20
[ 48.360] (II) fglrx(0): No DPMS capabilities specified
[ 48.360] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[ 48.360] (II) fglrx(0): First detailed timing is preferred mode
[ 48.360] (II) fglrx(0): redX: 0.577 redY: 0.333 greenX: 0.333
greenY: 0.554
[ 48.360] (II) fglrx(0): blueX: 0.161 blueY: 0.144 whiteX: 0.313
whiteY: 0.329
[ 48.360] (II) fglrx(0): Manufacturer's mask: 0
[ 48.360] (II) fglrx(0): Supported detailed timing:
[ 48.360] (II) fglrx(0): clock: 71.9 MHz Image Size: 344 x 193 mm
[ 48.360] (II) fglrx(0): h_active: 1366 h_sync: 1374 h_sync_end
1384 h_blank_end 1544 h_border: 0
[ 48.360] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 772
v_blanking: 776 v_border: 0
[ 48.360] (II) fglrx(0): Unknown vendor-specific block f
[ 48.360] (II) fglrx(0): AUO
[ 48.360] (II) fglrx(0): B156XW04 V0
[ 48.360] (II) fglrx(0): EDID (in hex):
[ 48.360] (II) fglrx(0): 00ffffffffffff0006afec4001000000
[ 48.360] (II) fglrx(0): 01130103802213780ad7759355558d29
[ 48.360] (II) fglrx(0): 24505400000001010101010101010101
[ 48.360] (II) fglrx(0): 010101010101151c56b250000830080a
[ 48.360] (II) fglrx(0): 310058c1100000180000000f00000000
[ 48.360] (II) fglrx(0): 00000000000000000020000000fe0041
[ 48.360] (II) fglrx(0): 554f0a202020202020202020000000fe
[ 48.360] (II) fglrx(0): 004231353658573034205630200a007e
[ 48.360] (II) fglrx(0): EDID vendor "AUO", prod id 16620
[ 48.360] (II) fglrx(0): Printing DDC gathered Modelines:
[ 48.360] (II) fglrx(0): Modeline "1366x768"x0.0 71.89 1366 1374
1384 1544 768 771 772 776 -hsync -vsync (46.6 kHz eP)
[ 48.360] (II) fglrx(0): Printing probed modes for output LVDS
[ 48.360] (II) fglrx(0): Modeline "1366x768"x60.0 71.89 1366 1374
1384 1544 768 771 772 776 -hsync -vsync (46.6 kHz eP)
[ 48.360] (II) fglrx(0): Modeline "1360x768"x60.0 71.89 1360 1374
1384 1544 768 771 772 776 -hsync -vsync (46.6 kHz e)
[ 48.360] (II) fglrx(0): Modeline "1280x768"x60.0 71.89 1280 1374
1384 1544 768 771 772 776 -hsync -vsync (46.6 kHz e)
[ 48.360] (II) fglrx(0): Modeline "1280x720"x60.0 71.89 1280 1374
1384 1544 720 771 772 776 -hsync -vsync (46.6 kHz e)
[ 48.360] (II) fglrx(0): Modeline "1024x768"x60.0 71.89 1024 1374
1384 1544 768 771 772 776 -hsync -vsync (46.6 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1024x600"x60.0 71.89 1024 1374
1384 1544 600 771 772 776 -hsync -vsync (46.6 kHz e)
[ 48.361] (II) fglrx(0): Modeline "800x600"x60.0 71.89 800 1374
1384 1544 600 771 772 776 -hsync -vsync (46.6 kHz e)
[ 48.361] (II) fglrx(0): Modeline "800x480"x60.0 71.89 800 1374
1384 1544 480 771 772 776 -hsync -vsync (46.6 kHz e)
[ 48.361] (II) fglrx(0): Modeline "640x480"x60.0 71.89 640 1374
1384 1544 480 771 772 776 -hsync -vsync (46.6 kHz e)
[ 48.361] (II) fglrx(0): EDID for output DFP1
[ 48.361] (II) fglrx(0): EDID for output CRT1
[ 48.361] (II) fglrx(0): Manufacturer: BNQ Model: 8001 Serial#: 21573
[ 48.361] (II) fglrx(0): Year: 2012 Week: 7
[ 48.361] (II) fglrx(0): EDID Version: 1.3
[ 48.361] (II) fglrx(0): Analog Display Input, Input Voltage Level:
0.700/0.300 V
[ 48.361] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 48.361] (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 48.361] (II) fglrx(0): Gamma: 2.20
[ 48.361] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 48.361] (II) fglrx(0): Default color space is primary color space
[ 48.361] (II) fglrx(0): First detailed timing is preferred mode
[ 48.361] (II) fglrx(0): redX: 0.643 redY: 0.339 greenX: 0.329
greenY: 0.624
[ 48.361] (II) fglrx(0): blueX: 0.155 blueY: 0.048 whiteX: 0.313
whiteY: 0.329
[ 48.361] (II) fglrx(0): Supported established timings:
[ 48.361] (II) fglrx(0): 640x480 at 60Hz
[ 48.361] (II) fglrx(0): 800x600 at 60Hz
[ 48.361] (II) fglrx(0): 1024x768 at 60Hz
[ 48.361] (II) fglrx(0): Manufacturer's mask: 0
[ 48.361] (II) fglrx(0): Supported standard timings:
[ 48.361] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60
vid: 129
[ 48.361] (II) fglrx(0): #1: hsize: 1280 vsize 720 refresh: 60
vid: 49281
[ 48.361] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60
vid: 32897
[ 48.361] (II) fglrx(0): #3: hsize: 1600 vsize 900 refresh: 60
vid: 49321
[ 48.361] (II) fglrx(0): #4: hsize: 1680 vsize 1050 refresh: 60
vid: 179
[ 48.361] (II) fglrx(0): #5: hsize: 1920 vsize 1080 refresh: 60
vid: 49361
[ 48.361] (II) fglrx(0): Supported detailed timing:
[ 48.361] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 48.361] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end
2052 h_blank_end 2200 h_border: 0
[ 48.361] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end
1089 v_blanking: 1125 v_border: 0
[ 48.361] (II) fglrx(0): Serial No: B2C04055SL0
[ 48.361] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H
max: 83 kHz, PixClock max 175 MHz
[ 48.361] (II) fglrx(0): Monitor name: BenQ BL2400
[ 48.361] (II) fglrx(0): EDID (in hex):
[ 48.361] (II) fglrx(0): 00ffffffffffff0009d1018045540000
[ 48.361] (II) fglrx(0): 071601030e351e782eb7d5a456549f27
[ 48.361] (II) fglrx(0): 0c5054210800810081c08180a9c0b300
[ 48.361] (II) fglrx(0): d1c001010101023a801871382d40582c
[ 48.361] (II) fglrx(0): 4500dd0c1100001e000000ff00423243
[ 48.361] (II) fglrx(0): 3034303535534c300a20000000fd0032
[ 48.361] (II) fglrx(0): 4c1e5311000a202020202020000000fc
[ 48.361] (II) fglrx(0): 0042656e5120424c323430300a2000be
[ 48.361] (II) fglrx(0): Printing probed modes for output CRT1
[ 48.361] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008
2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 48.361] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784
1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1400x1050"x60.0 146.25 1400 1784
1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624
1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1440x900"x60.0 108.00 1440 1624
1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328
1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352
1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352
1480 1680 768 803 809 831 -hsync +vsync (49.7 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336
1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 48.361] (II) fglrx(0): Modeline "1024x600"x60.0 65.00 1024 1048
1184 1344 600 771 777 806 -hsync -vsync (48.4 kHz e)
[ 48.361] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 48.361] (II) fglrx(0): Modeline "800x480"x60.0 40.00 800 840 968
1056 480 601 605 628 +hsync +vsync (37.9 kHz e)
[ 48.361] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 48.361] (II) fglrx(0): Output LVDS connected
[ 48.361] (II) fglrx(0): Output DFP1 disconnected
[ 48.361] (II) fglrx(0): Output CRT1 connected
[ 48.361] (II) fglrx(0): Using fuzzy aspect match for initial modes
[ 48.361] (II) fglrx(0): Output LVDS using initial mode 1280x720
[ 48.361] (II) fglrx(0): Output CRT1 using initial mode 1280x720
[ 48.362] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[ 48.362] (II) fglrx(0): Setting highest common mode
[ 48.362] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 48.362] (II) fglrx(0): DPI set to (96, 96)
[ 48.362] (II) fglrx(0): Eyefinity capable adapter detected.
[ 48.362] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series
has 6 configurable heads and 2 displays connected.
[ 48.362] (==) fglrx(0): PseudoColor visuals disabled
[ 48.362] (II) Loading sub module "ramdac"
[ 48.362] (II) LoadModule: "ramdac"
[ 48.362] (II) Module "ramdac" already built-in
[ 48.362] (==) fglrx(0): NoDRI = NO
[ 48.362] (==) fglrx(0): Capabilities: 0x00000000
[ 48.362] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 48.362] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 48.362] (==) fglrx(0): UseFastTLS=0
[ 48.362] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 48.362] (--) Depth 24 pixmap format is 32 bpp
[ 48.362] Loading extension ATIFGLRXDRI
[ 48.362] (II) fglrx(0): doing swlDriScreenInit
[ 48.362] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 48.362] ukiDynamicMajor: found major device number 249
[ 48.362] ukiDynamicMajor: found major device number 249
[ 48.362] ukiDynamicMajor: found major device number 249
[ 48.362] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 48.362] ukiOpenDevice: node name is /dev/ati/card0
[ 48.362] ukiOpenDevice: open result is 13, (OK)
[ 48.362] ukiOpenByBusid: ukiOpenMinor returns 13
[ 48.362] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 48.363] (II) fglrx(0): [uki] DRM interface version 1.0
[ 48.363] (II) fglrx(0): [uki] created "fglrx" driver at busid
"PCI:1:0:0"
[ 48.363] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 48.363] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f499c45c000
[ 48.363] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 48.363] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 48.363] (II) fglrx(0): swlDriScreenInit done
[ 48.363] (II) fglrx(0): Kernel Module Version Information:
[ 48.363] (II) fglrx(0): Name: fglrx
[ 48.363] (II) fglrx(0): Version: 13.25.5
[ 48.363] (II) fglrx(0): Date: Dec 6 2013
[ 48.363] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 48.363] (II) fglrx(0): Kernel Module version matches driver.
[ 48.363] (II) fglrx(0): Kernel Module Build Time Information:
[ 48.363] (II) fglrx(0): Build-Kernel UTS_RELEASE:
3.12-1-amd64
[ 48.363] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 48.363] (II) fglrx(0): Build-Kernel __SMP__: no
[ 48.363] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 48.363] (II) fglrx(0): [uki] register handle = 0x00004000
[ 48.363] (EE) fglrx(0): Failed to open CMMQS connection.
[ 48.363] (EE)
[ 48.363] (EE) Backtrace:
[ 48.371] (EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x7f499c606ccd]
[ 48.371] (EE) 1: /usr/bin/X (0x7f499c465000+0x1a5a29) [0x7f499c60aa29]
[ 48.371] (EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0
(0x7f499b564000+0xf210) [0x7f499b573210]
[ 48.371] (EE) 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so
(swlDrmFreeSurfaces+0x42) [0x7f49981903b2]
[ 48.372] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so
(xdl_xs114_atiddxDriCloseScreen+0x14d) [0x7f499815747d]
[ 48.372] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so
(xdl_xs114_atiddxDriScreenInit+0x8eb) [0x7f4998156b1b]
[ 48.372] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so
(xdl_xs114_atiddxScreenInit+0xf82) [0x7f4998150572]
[ 48.373] (EE) 7: /usr/bin/X (AddScreen+0x71) [0x7f499c4ba281]
[ 48.373] (EE) 8: /usr/bin/X (InitOutput+0x3df) [0x7f499c4fa81f]
[ 48.373] (EE) 9: /usr/bin/X (0x7f499c465000+0x4436b) [0x7f499c4a936b]
[ 48.373] (EE) 10: /lib/x86_64-linux-gnu/libc.so.6
(__libc_start_main+0xf5) [0x7f499a1bb995]
[ 48.373] (EE) 11: /usr/bin/X (0x7f499c465000+0x4489f) [0x7f499c4a989f]
[ 48.373] (EE)
[ 48.373] (EE) Segmentation fault at address 0x8a0
[ 48.373] (EE)
Fatal server error:
[ 48.373] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 48.373] (EE)
[ 48.373] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 48.373] (EE) Please also check the log file at
"/var/log/Xorg.0.log" for additional information.
[ 48.373] (EE)
Config file: xorg.conf (created by aticonfig --initial):
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
More information about the Pkg-fglrx-devel
mailing list