[Pkg-fglrx-devel] Bug#775433: OpenCL application fails when OpenCL/OpenGL interoperability is used
Felix Schmidt
fesc2000 at mailbox.org
Thu Jan 15 16:56:04 UTC 2015
Package: libgl1-fglrx-glx
Severity: normal
Dear Maintainer,
Whenever i update the fglrx-driver package, including OpenGL/OpenCL
drivers, my OpenGL/OpenCL application fails to work when it makes use of
OpenCL/OpenGL interoperability features.
It crashes with an X error.
I had already reported this on the AMD OpenCL forum since i initially
though this a fglrx buf (see
http://devgurus.amd.com/message/1306438#1306438).
The workaround for this is to change the symbolic link
/etc/alternatives/glx--libGL.so-x86_64-linux-gnu to
glx--libGL.so.1-x86_64-linux-gnu
instead of /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so
Obviously /etc/alternatives/glx--libGL.so-x86_64-linux-gnu gets reloaded
during runtime.
The actual application is linked against
/usr/lib/x86_64-linux-gnu/libGL.so.1, which points to
/etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu.
After using 1:14.9 for a while (where i fixed the link) i upgraded to
1:14.12 from experimental, and the wrong link was installed again.
Not sure if it's a flaw in my installation, but i thought i report it.
-- Package-specific info:
Full fglrx package list:
rc fglrx 2:14.500-0ubuntu1 amd64
Video driver for the AMD graphics accelerators
ii fglrx-atieventsd 1:14.9+ga14.201-2 amd64
events daemon for the non-free ATI/AMD RadeonHD display
driver
ii fglrx-control 1:14.12-1 amd64
control panel for the non-free ATI/AMD RadeonHD display
driver
ii fglrx-driver 1:14.12-1 amd64
non-free ATI/AMD RadeonHD display driver
ii fglrx-modules-dkms 1:14.12-1 amd64
dkms module source for the non-free ATI/AMD RadeonHD
display driver
ii fglrx-source 1:14.9+ga14.201-2 amd64
kernel module source for the non-free ATI/AMD RadeonHD
display driver
rc fglrx64-p-i-c 14.50-2 amd64
X Window display driver for the AMD graphics
accelerators
ii glx-alternative-fglrx 0.5.1 amd64
allows the selection of FGLRX as GLX provider
ii libfglrx:amd64 1:14.12-1 amd64
non-free ATI/AMD RadeonHD display driver (runtime
libraries)
rc libfglrx:i386 1:14.9+ga14.201-1 i386
non-free ATI/AMD RadeonHD display driver (runtime
libraries)
ii libfglrx-amdxvba1:amd64 1:14.12-1 amd64
AMD XvBA (X-Video Bitstream Acceleration) runtime
libraries
rc libfglrx-amdxvba1:i386 1:14.6~ga14.201-1 i386
AMD XvBA (X-Video Bitstream Acceleration) runtime
libraries
ii libgl1-fglrx-glx:amd64 1:14.12-1 amd64
proprietary libGL for the non-free ATI/AMD RadeonHD
display driver
rc libgl1-fglrx-glx:i386 1:14.9+ga14.201-1 i386
proprietary libGL for the non-free ATI/AMD RadeonHD
display driver
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Juniper XT [Radeon HD 5770] [1002:68b8] (prog-if 00 [VGA
controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device
[1002:2543]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f0020000 (64-bit, non-prefetchable)
[size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
DRM and fglrx Informations from dmesg:
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.555548] Linux agpgart interface v0.103
[ 9.483369] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 9.526248] <6>[fglrx] Maximum main memory to use for locked dma
buffers: 7700 MBytes.
[ 9.526312] <6>[fglrx] vendor: 1002 device: 68b8 revision: 0 count: 1
[ 9.526455] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 9.526602] <6>[fglrx] Kernel PAT support is enabled
[ 9.526615] <6>[fglrx] module loaded - fglrx 14.50.2 [Nov 20 2014] with
1 minors
[ 29.812256] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X
[ 29.812688] <6>[fglrx] Firegl kernel thread PID: 1818
[ 29.812814] <6>[fglrx] Firegl kernel thread PID: 1819
[ 29.812952] <6>[fglrx] Firegl kernel thread PID: 1820
[ 29.813036] <6>[fglrx] IRQ 48 Enabled
[ 29.822636] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 29.822638] <6>[fglrx] Reserved FB block: Unshared offset:f7b4000,
size:4000
[ 29.822638] <6>[fglrx] Reserved FB block: Unshared offset:f7b8000,
size:548000
[ 29.822639] <6>[fglrx] Reserved FB block: Unshared offset:3fff3000,
size:d000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 723 Oct 22 15:58 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "BlockSignalsOnLock" "off"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 42240 Jan 15 16:32 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 27.873]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 27.873] X Protocol Version 11, Revision 0
[ 27.873] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 27.873] Current Operating System: Linux hera 3.16.5 #2 SMP Fri Jan 9
14:45:12 CET 2015 x86_64
[ 27.873] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.5
root=UUID=5feb143c-e209-4ab3-b09b-ddf2524f1c8d ro quiet
[ 27.873] Build Date: 09 December 2014 10:15:28PM
[ 27.873] xorg-server 2:1.16.2.901-1 (http://www.debian.org/support)
[ 27.873] Current version of pixman: 0.32.6
[ 27.873] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.873] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.874] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 15
16:31:22 2015
[ 28.062] (==) Using config file: "/etc/X11/xorg.conf"
[ 28.062] (==) Using system config directory
"/usr/share/X11/xorg.conf.d"
[ 28.390] (==) ServerLayout "aticonfig Layout"
[ 28.390] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 28.390] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 28.411] (**) | |-->Device "aticonfig-Device[0]-0"
[ 28.411] (==) Automatically adding devices
[ 28.411] (==) Automatically enabling devices
[ 28.411] (==) Automatically adding GPU devices
[ 28.454] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 28.454] Entry deleted from font path.
[ 28.482] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 28.482] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.482] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 28.488] (II) Loader magic: 0x7f02de514d80
[ 28.488] (II) Module ABI versions:
[ 28.488] X.Org ANSI C Emulation: 0.4
[ 28.488] X.Org Video Driver: 18.0
[ 28.488] X.Org XInput driver : 21.0
[ 28.488] X.Org Server Extension : 8.0
[ 28.489] (--) PCI:*(0:1:0:0) 1002:68b8:1002:2543 rev 0, Mem @
0xe0000000/268435456, 0xf0020000/131072, I/O @ 0x0000e000/256, BIOS @
0x????????/131072
[ 28.490] (II) "glx" will be loaded by default.
[ 28.490] (II) LoadModule: "glx"
[ 28.549] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 28.575] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 28.575] compiled for 6.9.0, module version = 1.0.0
[ 28.575] (II) LoadModule: "fglrx"
[ 28.611] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 29.109] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 29.109] compiled for 1.4.99.906, module version = 14.50.2
[ 29.109] Module class: X.Org Video Driver
[ 29.144] (II) Loading sub module "fglrxdrm"
[ 29.144] (II) LoadModule: "fglrxdrm"
[ 29.144] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 29.189] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 29.189] compiled for 1.4.99.906, module version = 14.50.2
[ 29.189] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
[ 29.189] (II) AMD Proprietary Linux Driver Release Identifier:
14.501.1003
[ 29.189] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014
21:22:54
[ 29.189] (++) using VT number 7
[ 29.189] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 29.189] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 29.193] (WW) Falling back to old probe method for fglrx
[ 29.309] (II) Loading PCS database from /etc/ati/amdpcsdb
/etc/ati/amdpcsdb.default
[ 29.328] ukiDynamicMajor: found major device number 249
[ 29.328] ukiDynamicMajor: found major device number 249
[ 29.328] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 29.328] ukiOpenDevice: node name is /dev/ati/card0
[ 29.328] ukiOpenDevice: open result is 9, (OK)
[ 29.831] ukiOpenByBusid: ukiOpenMinor returns 9
[ 29.832] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 29.857] (--) Chipset Supported AMD Graphics Processor (0x68B8) found
[ 29.858] (WW) fglrx: No matching Device section for instance (BusID
PCI:0 at 1:0:1) found
[ 29.862] (II) fglrx(0): pEnt->device->identifier=0x7f02e03bf3c0
[ 29.862] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[ 29.862] (II) fglrx(0): FB driver is not enabled
[ 29.862] (II) Loading sub module "vgahw"
[ 29.862] (II) LoadModule: "vgahw"
[ 29.876] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 29.886] (II) Module vgahw: vendor="X.Org Foundation"
[ 29.886] compiled for 1.16.2.901, module version = 0.1.0
[ 29.886] ABI class: X.Org Video Driver, version 18.0
[ 29.887] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 29.887] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32
bpp pixmaps)
[ 29.887] (==) fglrx(0): Default visual is TrueColor
[ 29.887] (**) fglrx(0): Option "DPMS" "true"
[ 29.887] (==) fglrx(0): RGB weight 888
[ 29.887] (II) fglrx(0): Using 8 bits per RGB
[ 29.887] (==) fglrx(0): Buffer Tiling is ON
[ 29.887] (II) Loading sub module "fglrxdrm"
[ 29.887] (II) LoadModule: "fglrxdrm"
[ 29.887] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 29.887] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 29.887] compiled for 1.4.99.906, module version = 14.50.2
[ 29.888] ukiDynamicMajor: found major device number 249
[ 29.888] ukiDynamicMajor: found major device number 249
[ 29.888] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 29.888] ukiOpenDevice: node name is /dev/ati/card0
[ 29.888] ukiOpenDevice: open result is 11, (OK)
[ 29.888] ukiOpenByBusid: ukiOpenMinor returns 11
[ 29.888] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 29.888] (**) fglrx(0): NoAccel = NO
[ 29.888] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 29.888] (--) fglrx(0): Chipset: "AMD Radeon HD 5700 Series" (Chipset
= 0x68b8)
[ 29.888] (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x2543)
[ 29.888] (==) fglrx(0): board vendor info: original AMD graphics
adapter
[ 29.888] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 29.888] (--) fglrx(0): MMIO registers at 0xf0020000
[ 29.888] (--) fglrx(0): I/O port at 0x0000e000
[ 29.888] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 29.901] (II) fglrx(0): AC Adapter is used
[ 29.916] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 30.013] (II) Loading sub module "vbe"
[ 30.013] (II) LoadModule: "vbe"
[ 30.013] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 30.014] (II) Module vbe: vendor="X.Org Foundation"
[ 30.014] compiled for 1.16.2.901, module version = 1.1.0
[ 30.014] ABI class: X.Org Video Driver, version 18.0
[ 30.015] (II) fglrx(0): VESA BIOS detected
[ 30.015] (II) fglrx(0): VESA VBE Version 3.0
[ 30.015] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 30.015] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 30.015] (II) fglrx(0): VESA VBE OEM Software Rev: 12.13
[ 30.015] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI
Technologies Inc.
[ 30.015] (II) fglrx(0): VESA VBE OEM Product: JUNIPER
[ 30.015] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 30.015] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 30.015] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 30.015] (II) fglrx(0): PCIE card detected
[ 30.015] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 30.015] (II) fglrx(0): board/chipset is supported by this driver
(original AMD board)
[ 30.015] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize
= 0x40000000)
[ 30.015] (II) fglrx(0): RandR 1.2 support is enabled!
[ 30.015] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 30.015] (II) Loading sub module "fb"
[ 30.015] (II) LoadModule: "fb"
[ 30.023] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.035] (II) Module fb: vendor="X.Org Foundation"
[ 30.035] compiled for 1.16.2.901, module version = 1.0.0
[ 30.035] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.035] (II) fglrx(0): EDID Management option: EDID Management is
enabled
[ 30.035] (II) Loading sub module "ddc"
[ 30.035] (II) LoadModule: "ddc"
[ 30.035] (II) Module "ddc" already built-in
[ 30.277] (II) fglrx(0): Output DFP1 using monitor section
aticonfig-Monitor[0]-0
[ 30.277] (II) fglrx(0): Output DFP2 has no monitor section
[ 30.277] (II) fglrx(0): Output DFP3 has no monitor section
[ 30.277] (II) fglrx(0): Output DFP4 has no monitor section
[ 30.277] (II) fglrx(0): Output CRT1 has no monitor section
[ 30.277] (II) fglrx(0): Output CRT2 has no monitor section
[ 30.277] (II) Loading sub module "ddc"
[ 30.277] (II) LoadModule: "ddc"
[ 30.277] (II) Module "ddc" already built-in
[ 30.277] (II) fglrx(0): Connected Display0: DFP3
[ 30.277] (II) fglrx(0): Display0 EDID data ---------------------------
[ 30.277] (II) fglrx(0): Manufacturer: DEL Model: 400d Serial#:
1094866753
[ 30.277] (II) fglrx(0): Year: 2005 Week: 37
[ 30.277] (II) fglrx(0): EDID Version: 1.3
[ 30.277] (II) fglrx(0): Digital Display Input
[ 30.277] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 31
[ 30.277] (II) fglrx(0): Gamma: 2.20
[ 30.277] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 30.277] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[ 30.278] (II) fglrx(0): Default color space is primary color space
[ 30.278] (II) fglrx(0): First detailed timing is preferred mode
[ 30.278] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300
greenY: 0.600
[ 30.278] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313
whiteY: 0.329
[ 30.278] (II) fglrx(0): Supported established timings:
[ 30.278] (II) fglrx(0): 720x400 at 70Hz
[ 30.278] (II) fglrx(0): 640x480 at 60Hz
[ 30.278] (II) fglrx(0): 640x480 at 75Hz
[ 30.278] (II) fglrx(0): 800x600 at 60Hz
[ 30.278] (II) fglrx(0): 800x600 at 75Hz
[ 30.278] (II) fglrx(0): 1024x768 at 60Hz
[ 30.278] (II) fglrx(0): 1024x768 at 75Hz
[ 30.278] (II) fglrx(0): 1280x1024 at 75Hz
[ 30.278] (II) fglrx(0): Manufacturer's mask: 0
[ 30.278] (II) fglrx(0): Supported standard timings:
[ 30.278] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid:
20337
[ 30.278] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 30.278] (II) fglrx(0): Supported detailed timing:
[ 30.278] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 30.278] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440
h_blank_end 1688 h_border: 0
[ 30.278] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028
v_blanking: 1066 v_border: 0
[ 30.278] (II) fglrx(0): Serial No: T6117599ABWA
[ 30.278] (II) fglrx(0): Monitor name: DELL 1905FP
[ 30.278] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H
max: 81 kHz, PixClock max 145 MHz
[ 30.278] (II) fglrx(0): EDID (in hex):
[ 30.278] (II) fglrx(0): 00ffffffffffff0010ac0d4041574241
[ 30.278] (II) fglrx(0): 250f010380261f78eeee95a3544c9926
[ 30.278] (II) fglrx(0): 0f5054a54b00714f8180010101010101
[ 30.278] (II) fglrx(0): 010101010101302a009851002a403070
[ 30.278] (II) fglrx(0): 1300782d1100001e000000ff00543631
[ 30.278] (II) fglrx(0): 3137353939414257410a000000fc0044
[ 30.278] (II) fglrx(0): 454c4c203139303546500a20000000fd
[ 30.278] (II) fglrx(0): 00384c1e510e000a20202020202000d4
[ 30.278] (II) fglrx(0): End of Display0 EDID data --------------------
[ 30.278] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 30.278] (II) fglrx(0): EDID for output DFP1
[ 30.278] (II) fglrx(0): EDID for output DFP2
[ 30.278] (II) fglrx(0): EDID for output DFP3
[ 30.278] (II) fglrx(0): Manufacturer: DEL Model: 400d Serial#:
1094866753
[ 30.278] (II) fglrx(0): Year: 2005 Week: 37
[ 30.278] (II) fglrx(0): EDID Version: 1.3
[ 30.278] (II) fglrx(0): Digital Display Input
[ 30.278] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 31
[ 30.278] (II) fglrx(0): Gamma: 2.20
[ 30.278] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 30.278] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[ 30.278] (II) fglrx(0): Default color space is primary color space
[ 30.278] (II) fglrx(0): First detailed timing is preferred mode
[ 30.278] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300
greenY: 0.600
[ 30.278] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313
whiteY: 0.329
[ 30.278] (II) fglrx(0): Supported established timings:
[ 30.278] (II) fglrx(0): 720x400 at 70Hz
[ 30.278] (II) fglrx(0): 640x480 at 60Hz
[ 30.278] (II) fglrx(0): 640x480 at 75Hz
[ 30.278] (II) fglrx(0): 800x600 at 60Hz
[ 30.278] (II) fglrx(0): 800x600 at 75Hz
[ 30.278] (II) fglrx(0): 1024x768 at 60Hz
[ 30.278] (II) fglrx(0): 1024x768 at 75Hz
[ 30.278] (II) fglrx(0): 1280x1024 at 75Hz
[ 30.278] (II) fglrx(0): Manufacturer's mask: 0
[ 30.278] (II) fglrx(0): Supported standard timings:
[ 30.278] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid:
20337
[ 30.278] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 30.278] (II) fglrx(0): Supported detailed timing:
[ 30.278] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 30.278] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440
h_blank_end 1688 h_border: 0
[ 30.278] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028
v_blanking: 1066 v_border: 0
[ 30.278] (II) fglrx(0): Serial No: T6117599ABWA
[ 30.278] (II) fglrx(0): Monitor name: DELL 1905FP
[ 30.278] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H
max: 81 kHz, PixClock max 145 MHz
[ 30.278] (II) fglrx(0): EDID (in hex):
[ 30.278] (II) fglrx(0): 00ffffffffffff0010ac0d4041574241
[ 30.278] (II) fglrx(0): 250f010380261f78eeee95a3544c9926
[ 30.278] (II) fglrx(0): 0f5054a54b00714f8180010101010101
[ 30.278] (II) fglrx(0): 010101010101302a009851002a403070
[ 30.278] (II) fglrx(0): 1300782d1100001e000000ff00543631
[ 30.278] (II) fglrx(0): 3137353939414257410a000000fc0044
[ 30.278] (II) fglrx(0): 454c4c203139303546500a20000000fd
[ 30.278] (II) fglrx(0): 00384c1e510e000a20202020202000d4
[ 30.278] (II) fglrx(0): Printing probed modes for output DFP3
[ 30.278] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 30.278] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30.278] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296
1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30.278] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328
1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 30.278] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 30.278] (II) fglrx(0): Modeline "1152x864"x60.0 108.00 1152 1328
1440 1688 864 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 30.278] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296
1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30.278] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328
1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 30.278] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296
1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30.278] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328
1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 30.278] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 30.278] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 30.278] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 30.278] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 30.278] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 30.278] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 30.278] (II) fglrx(0): EDID for output DFP4
[ 30.278] (II) fglrx(0): EDID for output CRT1
[ 30.278] (II) fglrx(0): EDID for output CRT2
[ 30.278] (II) fglrx(0): Output DFP1 disconnected
[ 30.278] (II) fglrx(0): Output DFP2 disconnected
[ 30.278] (II) fglrx(0): Output DFP3 connected
[ 30.278] (II) fglrx(0): Output DFP4 disconnected
[ 30.278] (II) fglrx(0): Output CRT1 disconnected
[ 30.278] (II) fglrx(0): Output CRT2 disconnected
[ 30.278] (II) fglrx(0): Using exact sizes for initial modes
[ 30.278] (II) fglrx(0): Output DFP3 using initial mode 1280x1024
[ 30.278] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 30.278] (II) fglrx(0): DPI set to (96, 96)
[ 30.278] (II) fglrx(0): Eyefinity capable adapter detected.
[ 30.279] (II) fglrx(0): Adapter AMD Radeon HD 5700 Series has 5
configurable heads and 1 displays connected.
[ 30.279] (==) fglrx(0): PseudoColor visuals disabled
[ 30.279] (II) Loading sub module "ramdac"
[ 30.279] (II) LoadModule: "ramdac"
[ 30.279] (II) Module "ramdac" already built-in
[ 30.279] (==) fglrx(0): NoDRI = NO
[ 30.279] (==) fglrx(0): Capabilities: 0x00000000
[ 30.279] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 30.279] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 30.279] (==) fglrx(0): UseFastTLS=0
[ 30.279] (II) fglrx(0): Shadow Primary option: ShadowPrimary is
enabled
[ 30.279] (--) Depth 24 pixmap format is 32 bpp
[ 30.279] (II) fglrx(0): doing swlDriScreenInit
[ 30.279] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 30.279] ukiDynamicMajor: found major device number 249
[ 30.279] ukiDynamicMajor: found major device number 249
[ 30.279] ukiDynamicMajor: found major device number 249
[ 30.279] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 30.279] ukiOpenDevice: node name is /dev/ati/card0
[ 30.279] ukiOpenDevice: open result is 12, (OK)
[ 30.279] ukiOpenByBusid: ukiOpenMinor returns 12
[ 30.279] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 30.279] (II) fglrx(0): [uki] DRM interface version 1.0
[ 30.279] (II) fglrx(0): [uki] created "fglrx" driver at busid
"PCI:1:0:0"
[ 30.279] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 30.279] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f02de0ce000
[ 30.279] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 30.279] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 30.279] (II) fglrx(0): swlDriScreenInit done
[ 30.279] (II) fglrx(0): Kernel Module Version Information:
[ 30.279] (II) fglrx(0): Name: fglrx
[ 30.279] (II) fglrx(0): Version: 14.50.2
[ 30.279] (II) fglrx(0): Date: Nov 20 2014
[ 30.279] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 30.279] (II) fglrx(0): Kernel Module version matches driver.
[ 30.279] (II) fglrx(0): Kernel Module Build Time Information:
[ 30.279] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.16.5
[ 30.279] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 30.279] (II) fglrx(0): Build-Kernel __SMP__: no
[ 30.279] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 30.279] (II) fglrx(0): [uki] register handle = 0x00004000
[ 30.281] (II) fglrx(0): DRI initialization successfull
[ 30.295] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01040000
[ 30.304] (==) fglrx(0): Backing store enabled
[ 30.304] (**) fglrx(0): DPMS enabled
[ 30.304] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 30.304] (**) fglrx(0): Textured Video is enabled.
[ 30.304] (II) LoadModule: "glesx"
[ 30.304] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 30.421] (II) Module glesx: vendor="X.Org Foundation"
[ 30.421] compiled for 1.4.99.906, module version = 1.0.0
[ 30.421] (II) fglrx(0): GLESX enableFlags = 8784
[ 30.430] (II) fglrx(0): GLESX is enabled
[ 30.430] (II) LoadModule: "amdxmm"
[ 30.430] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 30.451] (II) Module amdxmm: vendor="X.Org Foundation"
[ 30.451] compiled for 1.4.99.906, module version = 2.0.0
[ 30.487] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 30.488] (II) fglrx(0): Enable composite support successfully
[ 30.488] (WW) fglrx(0): Option "BlockSignalsOnLock" is not used
[ 30.488] (WW) fglrx(0): Option "VendorName" is not used
[ 30.488] (WW) fglrx(0): Option "ModelName" is not used
[ 30.488] (II) fglrx(0): X context handle = 0x1
[ 30.488] (II) fglrx(0): [DRI] installation complete
[ 30.489] (==) fglrx(0): Silken mouse enabled
[ 30.489] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 30.489] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 30.540] (--) RandR disabled
[ 30.583] (II) SELinux: Disabled on system
[ 30.584] ukiDynamicMajor: found major device number 249
[ 30.584] ukiDynamicMajor: found major device number 249
[ 30.584] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 30.584] ukiOpenDevice: node name is /dev/ati/card0
[ 30.584] ukiOpenDevice: open result is 13, (OK)
[ 30.584] ukiOpenByBusid: ukiOpenMinor returns 13
[ 30.584] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 30.828] ukiDynamicMajor: found major device number 249
[ 30.828] ukiDynamicMajor: found major device number 249
[ 30.828] ukiDynamicMajor: found major device number 249
[ 30.828] ukiOpenDevice: node name is /dev/ati/card0
[ 30.828] ukiOpenDevice: open result is 14, (OK)
[ 30.828] ukiGetBusid returned 'PCI:1:0:0'
[ 30.828] ukiOpenDevice: node name is /dev/ati/card1
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: Open failed
[ 30.828] ukiOpenDevice: node name is /dev/ati/card2
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: Open failed
[ 30.828] ukiOpenDevice: node name is /dev/ati/card3
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: Open failed
[ 30.828] ukiOpenDevice: node name is /dev/ati/card4
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: Open failed
[ 30.828] ukiOpenDevice: node name is /dev/ati/card5
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: Open failed
[ 30.828] ukiOpenDevice: node name is /dev/ati/card6
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.828] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: Open failed
[ 30.829] ukiOpenDevice: node name is /dev/ati/card7
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: Open failed
[ 30.829] ukiOpenDevice: node name is /dev/ati/card8
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: Open failed
[ 30.829] ukiOpenDevice: node name is /dev/ati/card9
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: Open failed
[ 30.829] ukiOpenDevice: node name is /dev/ati/card10
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: Open failed
[ 30.829] ukiOpenDevice: node name is /dev/ati/card11
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: Open failed
[ 30.829] ukiOpenDevice: node name is /dev/ati/card12
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: Open failed
[ 30.829] ukiOpenDevice: node name is /dev/ati/card13
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: Open failed
[ 30.829] ukiOpenDevice: node name is /dev/ati/card14
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: Open failed
[ 30.829] ukiOpenDevice: node name is /dev/ati/card15
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: open result is -1, (No such device)
[ 30.829] ukiOpenDevice: Open failed
[ 30.829] ukiDynamicMajor: found major device number 249
[ 30.829] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 30.829] ukiOpenDevice: node name is /dev/ati/card0
[ 30.829] ukiOpenDevice: open result is 14, (OK)
[ 30.829] ukiOpenByBusid: ukiOpenMinor returns 14
[ 30.829] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 31.473] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX:
Initialized DRI GL provider for screen 0
[ 31.473] ukiDynamicMajor: found major device number 249
[ 31.473] ukiDynamicMajor: found major device number 249
[ 31.473] ukiDynamicMajor: found major device number 249
[ 31.473] ukiOpenDevice: node name is /dev/ati/card0
[ 31.473] ukiOpenDevice: open result is 15, (OK)
[ 31.473] ukiGetBusid returned 'PCI:1:0:0'
[ 31.473] ukiOpenDevice: node name is /dev/ati/card1
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card2
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card3
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card4
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card5
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card6
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card7
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card8
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card9
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card10
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card11
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card12
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card13
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card14
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiOpenDevice: node name is /dev/ati/card15
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: open result is -1, (No such device)
[ 31.473] ukiOpenDevice: Open failed
[ 31.473] ukiDynamicMajor: found major device number 249
[ 31.473] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 31.473] ukiOpenDevice: node name is /dev/ati/card0
[ 31.473] ukiOpenDevice: open result is 15, (OK)
[ 31.473] ukiOpenByBusid: ukiOpenMinor returns 15
[ 31.473] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 31.647] (II) fglrx(0): OverDrive5 Detected!
[ 31.651] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 32.183] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 32.183] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 32.183] (II) LoadModule: "evdev"
[ 32.183] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.211] (II) Module evdev: vendor="X.Org Foundation"
[ 32.211] compiled for 1.16.0, module version = 2.9.0
[ 32.211] Module class: X.Org XInput Driver
[ 32.211] ABI class: X.Org XInput driver, version 21.0
[ 32.211] (II) Using input driver 'evdev' for 'Power Button'
[ 32.211] (**) Power Button: always reports core events
[ 32.211] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 32.211] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.211] (--) evdev: Power Button: Found keys
[ 32.211] (II) evdev: Power Button: Configuring as keyboard
[ 32.211] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 32.211] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 32.211] (**) Option "xkb_rules" "evdev"
[ 32.211] (**) Option "xkb_model" "pc105"
[ 32.211] (**) Option "xkb_layout" "us"
[ 32.211] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 32.211] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 32.211] (II) Using input driver 'evdev' for 'Power Button'
[ 32.211] (**) Power Button: always reports core events
[ 32.211] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 32.211] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.211] (--) evdev: Power Button: Found keys
[ 32.211] (II) evdev: Power Button: Configuring as keyboard
[ 32.211] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 32.211] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 7)
[ 32.211] (**) Option "xkb_rules" "evdev"
[ 32.211] (**) Option "xkb_model" "pc105"
[ 32.211] (**) Option "xkb_layout" "us"
[ 32.211] (II) config/udev: Adding input device HDA ATI HDMI
HDMI/DP,pcm=3 (/dev/input/event2)
[ 32.211] (II) No input driver specified, ignoring this device.
[ 32.211] (II) This device may have been added with another device
file.
[ 32.212] (II) config/udev: Adding input device Logitech Optical USB
Mouse (/dev/input/event7)
[ 32.212] (**) Logitech Optical USB Mouse: Applying InputClass "evdev
pointer catchall"
[ 32.212] (II) Using input driver 'evdev' for 'Logitech Optical USB
Mouse'
[ 32.212] (**) Logitech Optical USB Mouse: always reports core events
[ 32.212] (**) evdev: Logitech Optical USB Mouse: Device:
"/dev/input/event7"
[ 32.212] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product
0xc016
[ 32.212] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons
[ 32.212] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s)
[ 32.212] (--) evdev: Logitech Optical USB Mouse: Found relative axes
[ 32.212] (--) evdev: Logitech Optical USB Mouse: Found x and y
relative axes
[ 32.212] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse
[ 32.212] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel
support
[ 32.212] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons
4 and 5
[ 32.212] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton:
4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.212] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/0003:046D:C016.0001/input/input10/event7"
[ 32.212] (II) XINPUT: Adding extended input device "Logitech Optical
USB Mouse" (type: MOUSE, id 8)
[ 32.212] (II) evdev: Logitech Optical USB Mouse: initialized for
relative axes.
[ 32.212] (**) Logitech Optical USB Mouse: (accel) keeping acceleration
scheme 1
[ 32.212] (**) Logitech Optical USB Mouse: (accel) acceleration profile
0
[ 32.212] (**) Logitech Optical USB Mouse: (accel) acceleration factor:
2.000
[ 32.212] (**) Logitech Optical USB Mouse: (accel) acceleration
threshold: 4
[ 32.212] (II) config/udev: Adding input device Logitech Optical USB
Mouse (/dev/input/mouse0)
[ 32.212] (II) No input driver specified, ignoring this device.
[ 32.212] (II) This device may have been added with another device
file.
[ 32.212] (II) config/udev: Adding input device Sun USB Keyboard
(/dev/input/event8)
[ 32.212] (**) Sun USB Keyboard: Applying InputClass "evdev keyboard
catchall"
[ 32.212] (II) Using input driver 'evdev' for 'Sun USB Keyboard'
[ 32.212] (**) Sun USB Keyboard: always reports core events
[ 32.212] (**) evdev: Sun USB Keyboard: Device: "/dev/input/event8"
[ 32.212] (--) evdev: Sun USB Keyboard: Vendor 0x430 Product 0xa2
[ 32.212] (--) evdev: Sun USB Keyboard: Found keys
[ 32.212] (II) evdev: Sun USB Keyboard: Configuring as keyboard
[ 32.212] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.4/3-1.2.4:1.0/0003:0430:00A2.0002/input/input11/event8"
[ 32.212] (II) XINPUT: Adding extended input device "Sun USB Keyboard"
(type: KEYBOARD, id 9)
[ 32.212] (**) Option "xkb_rules" "evdev"
[ 32.212] (**) Option "xkb_model" "pc105"
[ 32.212] (**) Option "xkb_layout" "us"
[ 32.212] (II) config/udev: Adding input device HDA Intel PCH Front Mic
(/dev/input/event3)
[ 32.212] (II) No input driver specified, ignoring this device.
[ 32.212] (II) This device may have been added with another device
file.
[ 32.212] (II) config/udev: Adding input device HDA Intel PCH Rear Mic
(/dev/input/event4)
[ 32.212] (II) No input driver specified, ignoring this device.
[ 32.212] (II) This device may have been added with another device
file.
[ 32.212] (II) config/udev: Adding input device HDA Intel PCH Line Out
(/dev/input/event5)
[ 32.212] (II) No input driver specified, ignoring this device.
[ 32.212] (II) This device may have been added with another device
file.
[ 32.213] (II) config/udev: Adding input device HDA Intel PCH Front
Headphone (/dev/input/event6)
[ 32.213] (II) No input driver specified, ignoring this device.
[ 32.213] (II) This device may have been added with another device
file.
[ 32.221] (II) fglrx(0): Restoring Recent Mode via PCS is not supported
in RANDR 1.2 capable environments
[ 42.205] (II) fglrx(0): EDID vendor "DEL", prod id 16397
[ 42.205] (II) fglrx(0): Using EDID range info for horizontal sync
[ 42.205] (II) fglrx(0): Using EDID range info for vertical refresh
[ 42.205] (II) fglrx(0): Printing DDC gathered Modelines:
[ 42.205] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 42.205] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 42.205] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 42.205] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42.205] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 42.205] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 42.205] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 42.205] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 42.205] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 42.205] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 81.124] ukiDynamicMajor: found major device number 249
[ 81.124] ukiDynamicMajor: found major device number 249
[ 81.124] ukiDynamicMajor: found major device number 249
[ 81.124] ukiOpenDevice: node name is /dev/ati/card0
[ 81.124] ukiOpenDevice: open result is 43, (OK)
[ 81.124] ukiGetBusid returned 'PCI:1:0:0'
[ 81.124] ukiOpenDevice: node name is /dev/ati/card1
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card2
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card3
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card4
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card5
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card6
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card7
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card8
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card9
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card10
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card11
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card12
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: open result is -1, (No such device)
[ 81.124] ukiOpenDevice: Open failed
[ 81.124] ukiOpenDevice: node name is /dev/ati/card13
[ 81.125] ukiOpenDevice: open result is -1, (No such device)
[ 81.125] ukiOpenDevice: open result is -1, (No such device)
[ 81.125] ukiOpenDevice: Open failed
[ 81.125] ukiOpenDevice: node name is /dev/ati/card14
[ 81.125] ukiOpenDevice: open result is -1, (No such device)
[ 81.125] ukiOpenDevice: open result is -1, (No such device)
[ 81.125] ukiOpenDevice: Open failed
[ 81.125] ukiOpenDevice: node name is /dev/ati/card15
[ 81.125] ukiOpenDevice: open result is -1, (No such device)
[ 81.125] ukiOpenDevice: open result is -1, (No such device)
[ 81.125] ukiOpenDevice: Open failed
[ 81.125] ukiDynamicMajor: found major device number 249
[ 81.125] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 81.125] ukiOpenDevice: node name is /dev/ati/card0
[ 81.125] ukiOpenDevice: open result is 43, (OK)
[ 81.125] ukiOpenByBusid: ukiOpenMinor returns 43
[ 81.125] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
Bug script output from package glx-alternative-fglrx:
Diversions:
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by
glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so by
glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1 by
glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 by
glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2 by
glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2.0.0 by
glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1.1.0 by
glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by
glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by
glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2
by glx-diversions
diversion of /usr/lib/libGL.so.1.2.0 to
/usr/lib/mesa-diverted/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so to
/usr/lib/mesa-diverted/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so to /usr/lib/mesa-diverted/libGLESv2.so
by glx-diversions
diversion of /usr/lib/libGLESv2.so.2 to
/usr/lib/mesa-diverted/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1 by
glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 by
glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2.0.0 by
glx-diversions
/usr/lib/mesa-diverted:
total 64
drwxr-xr-x 5 root root 4096 Oct 15 16:53 .
drwxr-xr-x 154 root root 45056 Jan 15 16:28 ..
drwxr-xr-x 2 root root 4096 Sep 27 19:57 arm-linux-gnueabihf
drwxr-xr-x 2 root root 4096 Oct 16 10:50 i386-linux-gnu
lrwxrwxrwx 1 root root 33 Oct 15 16:53 libGL.so-master ->
/etc/alternatives/libGL.so-master
drwxr-xr-x 2 root root 4096 Jan 14 09:52 x86_64-linux-gnu
/usr/lib/mesa-diverted/i386-linux-gnu/:
total 8
drwxr-xr-x 2 root root 4096 Oct 16 10:50 .
drwxr-xr-x 5 root root 4096 Oct 15 16:53 ..
lrwxrwxrwx 1 root root 48 Sep 30 10:27 libGL.so.1.2 ->
/usr/lib/i386-linux-gnu/fglrx/fglrx-libGL.so.1.2
/usr/lib/mesa-diverted/x86_64-linux-gnu/:
total 792
drwxr-xr-x 2 root root 4096 Jan 14 09:52 .
drwxr-xr-x 5 root root 4096 Oct 15 16:53 ..
lrwxrwxrwx 1 root root 15 Jan 13 12:52 libEGL.so -> libEGL.so.1.0.0
lrwxrwxrwx 1 root root 15 Jan 13 12:52 libEGL.so.1 -> libEGL.so.1.0.0
-rw-r--r-- 1 root root 169112 Jan 13 12:52 libEGL.so.1.0.0
lrwxrwxrwx 1 root root 14 Jan 13 12:52 libGL.so -> libGL.so.1.2.0
lrwxrwxrwx 1 root root 14 Jan 13 12:52 libGL.so.1 -> libGL.so.1.2.0
-rw-r--r-- 1 root root 627320 Jan 13 12:52 libGL.so.1.2.0
Alternative 'glx':
glx - auto mode
link currently points to /usr/lib/fglrx
/usr/lib/fglrx - priority 99
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libEGL.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu:
/usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
slave glx--linux-libglx.so: /usr/lib/fglrx/fglrx-libglx.so
/usr/lib/fglrx/igpu - priority 90
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libEGL.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
/usr/lib/mesa-diverted - priority 5
slave glx--libEGL.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
Current 'best' version is '/usr/lib/fglrx'.
lrwxrwxrwx 1 root root 14 Oct 24 12:23 /etc/alternatives/glx ->
/usr/lib/fglrx
lrwxrwxrwx 1 root root 27 Oct 24 12:23 /etc/alternatives/glx--fglrx_drv.so
-> /usr/lib/fglrx/fglrx_drv.so
lrwxrwxrwx 1 root root 49 Jan 14 10:06
/etc/alternatives/glx--libEGL.so-x86_64-linux-gnu ->
/usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so
lrwxrwxrwx 1 root root 51 Oct 24 12:23
/etc/alternatives/glx--libEGL.so.1-x86_64-linux-gnu ->
/usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
lrwxrwxrwx 1 root root 32 Jan 15 16:40
/etc/alternatives/glx--libGL.so-x86_64-linux-gnu ->
glx--libGL.so.1-x86_64-linux-gnu
lrwxrwxrwx 1 root root 48 Jan 14 10:06
/etc/alternatives/glx--libGL.so-x86_64-linux-gnu_ ->
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so
lrwxrwxrwx 1 root root 42 Oct 24 12:23
/etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu ->
/usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
lrwxrwxrwx 1 root root 30 Oct 24 12:23
/etc/alternatives/glx--linux-libglx.so -> /usr/lib/fglrx/fglrx-libglx.so
File System:
lrwxrwxrwx 1 root root 21 Oct 7 15:35 /usr/lib/glx ->
/etc/alternatives/glx
lrwxrwxrwx 1 root root 48 Oct 15 16:53
/usr/lib/x86_64-linux-gnu/libGL.so ->
/etc/alternatives/glx--libGL.so-x86_64-linux-gnu
lrwxrwxrwx 1 root root 50 Oct 17 11:56
/usr/lib/x86_64-linux-gnu/libGL.so.1 ->
/etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu
-rw-r--r-- 1 root root 294312 Dec 9 23:24
/usr/lib/xorg/modules/extensions/libglx.so
-- System Information:
Debian Release: 8.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.5 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages fglrx-driver depends on:
ii debconf [debconf-2.0] 1.5.55
ii glx-alternative-fglrx 0.5.1
ii libc6 2.19-13
ii libfglrx 1:14.12-1
ii libgl1-mesa-glx [libgl1] 10.4.2-1
ii libstdc++6 4.9.2-10
ii libx11-6 2:1.6.2-3
ii libxext6 2:1.3.3-1
ii libxrandr2 2:1.4.2-1+b1
ii libxrender1 1:0.9.8-1+b1
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.2.901-1
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:14.9+ga14.201-2
ii fglrx-modules-dkms [fglrx-kernel-14.12] 1:14.12-1
pn libgl1-fglrx-glx-i386 <none>
Versions of packages fglrx-driver suggests:
ii amd-opencl-icd 1:14.12-1
ii fglrx-control 1:14.12-1
pn xvba-va-driver <none>
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.19-13
ii libdrm-intel1 2.4.58-2
ii libdrm2 2.4.58-2
ii libpciaccess0 0.13.2-3+b1
ii libpixman-1-0 0.32.6-3
ii libudev1 215-9
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb-dri2-0 1.10-3+b1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.10-3+b1
ii libxv1 2:1.0.10-1+b1
ii libxvmc1 2:1.0.8-2+b1
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.2.901-1
Versions of packages libgl1-fglrx-glx is related to:
pn ia32-libs <none>
ii libdrm-radeon1 2.4.58-2
ii linux-headers-3.2.0-4-amd64 [linux-headers] 3.2.41-2
ii linux-headers-3.2.0-4-rt-amd64 [linux-headers] 3.2.41-2
ii xserver-xorg 1:7.7+7
ii xserver-xorg-core 2:1.16.2.901-1
ii xserver-xorg-video-ati 1:7.5.0-1
ii xserver-xorg-video-radeon 1:7.5.0-1
More information about the Pkg-fglrx-devel
mailing list