[Pkg-fglrx-devel] Bug#834481: libfglrx:i386 removes AMD64 libfglrx
Newton Jose de Moura Junior
newton.moura.junior at gmail.com
Tue Aug 16 03:33:28 UTC 2016
Package: libfglrx
Version: 1:15.12-2~bpo8+2
Severity: important
Dear Maintainer,
When I try install libfglrx:i386 it's removes this AMD64 packages:
fglrx-driver:amd64
libfglrx:amd64
libfglrx-amdxvba1:amd64
libgl1-fglrx-glx:amd64
As expected if I proceed with instalation After X don't starts after a
reboot.
-- Package-specific info:
Full fglrx package list:
ii fglrx-atieventsd 1:15.12-2~bpo8+2 amd64 events daemon for the non-free ATI/AMD RadeonHD display driv
rc fglrx-control 1:15.12-2~bpo8+2 amd64 control panel for the non-free ATI/AMD RadeonHD display driv
ii fglrx-driver 1:15.12-2~bpo8+2 amd64 non-free ATI/AMD RadeonHD display driver
ii fglrx-kernel-4.6.0-0.bpo.1- 1:15.12-2~bpo8+2+4 amd64 FGLRX binary kernel module for Linux 4.6.0-0.bpo.1-amd64
ii fglrx-modules-dkms 1:15.12-2~bpo8+2 amd64 dkms module source for the non-free ATI/AMD RadeonHD display
ii fglrx-source 1:15.12-2~bpo8+2 amd64 kernel module source for the non-free ATI/AMD RadeonHD displ
ii glx-alternative-fglrx 0.7.3~bpo8+1 amd64 allows the selection of FGLRX as GLX provider
ii libfglrx:amd64 1:15.12-2~bpo8+2 amd64 non-free ATI/AMD RadeonHD display driver (runtime libraries)
rc libfglrx:i386 1:15.12-2~bpo8+1 i386 non-free ATI/AMD RadeonHD display driver (runtime libraries)
ii libfglrx-amdxvba1:amd64 1:15.12-2~bpo8+2 amd64 AMD XvBA (X-Video Bitstream Acceleration) backend for VA API
ii libgl1-fglrx-glx:amd64 1:15.12-2~bpo8+2 amd64 proprietary libGL for the non-free ATI/AMD RadeonHD display
rc libgl1-fglrx-glx:i386 1:15.12-2~bpo8+1 i386 proprietary libGL for the non-free ATI/AMD RadeonHD display
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Oland PRO [Radeon R7 240] [1002:6613] (prog-if 00 [VGA controller])
Subsystem: Hightech Information System Ltd. Device [1787:2000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fdf80000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at ee00 [size=256]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
DRM and fglrx Informations from dmesg:
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x14fa000000-0x14fbffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 1.286049] PCI-DMA: Disabling AGP.
[ 1.286191] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.357066] Linux agpgart interface v0.103
[ 14.746851] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 14.803197] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7751 MBytes.
[ 14.803575] <6>[fglrx] vendor: 1002 device: 6613 revision: 0 count: 1
[ 14.804507] <6>[fglrx] ioport: bar 4, base 0xee00, size: 0x100
[ 14.805283] <6>[fglrx] Kernel PAT support is enabled
[ 14.805322] <6>[fglrx] module loaded - fglrx 15.30.3 [Dec 17 2015] with 1 minors
[ 30.692946] <6>[fglrx] Firegl kernel thread PID: 921
[ 30.693075] <6>[fglrx] Firegl kernel thread PID: 922
[ 30.693191] <6>[fglrx] IRQ 28 Enabled
[ 30.701655] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 30.701657] <6>[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[ 30.701658] <6>[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[ 30.701659] <6>[fglrx] Reserved FB block: Unshared offset:7ffee000, size:12000
/etc/X11/xorg.conf does not exist.
Xorg X server log files on system:
-rw-r--r-- 1 root root 41242 Feb 21 21:24 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 50418 Aug 16 00:13 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 29.174]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 29.174] X Protocol Version 11, Revision 0
[ 29.174] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 29.174] Current Operating System: Linux newton.virtua.com.br 4.6.0-0.bpo.1-amd64 #1 SMP Debian 4.6.4-1~bpo8+1 (2016-08-11) x86_64
[ 29.174] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-0.bpo.1-amd64 root=UUID=a3aa82ac-605f-4846-90eb-ad6e7d469d74 ro quiet vga=795
[ 29.174] Build Date: 11 February 2015 12:32:02AM
[ 29.174] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 29.174] Current version of pixman: 0.32.6
[ 29.174] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 29.174] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 29.174] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 16 00:12:22 2016
[ 29.269] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 29.269] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 29.399] (==) No Layout section. Using the first Screen section.
[ 29.399] (==) No screen section available. Using defaults.
[ 29.399] (**) |-->Screen "Default Screen Section" (0)
[ 29.399] (**) | |-->Monitor "<default monitor>"
[ 29.429] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 29.429] (**) | |-->Device "My GPU"
[ 29.429] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 29.429] (==) Automatically adding devices
[ 29.429] (==) Automatically enabling devices
[ 29.429] (==) Automatically adding GPU devices
[ 29.512] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 29.512] Entry deleted from font path.
[ 29.622] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 29.622] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 29.622] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 29.639] (II) Loader magic: 0x55c36657fd80
[ 29.639] (II) Module ABI versions:
[ 29.639] X.Org ANSI C Emulation: 0.4
[ 29.639] X.Org Video Driver: 18.0
[ 29.639] X.Org XInput driver : 21.0
[ 29.639] X.Org Server Extension : 8.0
[ 29.641] (--) PCI:*(0:1:0:0) 1002:6613:1787:2000 rev 0, Mem @ 0xd0000000/268435456, 0xfdf80000/262144, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
[ 29.684] (II) LoadModule: "glx"
[ 29.749] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 29.808] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 29.808] compiled for 6.9.0, module version = 1.0.0
[ 29.809] (II) LoadModule: "fglrx"
[ 29.871] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 30.190] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 30.190] compiled for 1.4.99.906, module version = 15.30.3
[ 30.190] Module class: X.Org Video Driver
[ 30.192] (II) Loading sub module "fglrxdrm"
[ 30.192] (II) LoadModule: "fglrxdrm"
[ 30.192] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 30.261] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 30.261] compiled for 1.4.99.906, module version = 15.30.3
[ 30.262] (II) AMD Proprietary Linux Driver Version Identifier:15.30.3
[ 30.262] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.302
[ 30.262] (II) AMD Proprietary Linux Driver Build Date: Dec 17 2015 02:43:16
[ 30.262] (++) using VT number 7
[ 30.265] (WW) Falling back to old probe method for fglrx
[ 30.397] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 30.401] ukiDynamicMajor: found major device number 247
[ 30.430] (--) Assigning device section with no busID to primary device
[ 30.430] (--) Chipset Supported AMD Graphics Processor (0x6613) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:17:0) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:0) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:1) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:18:2) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:0) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:1) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:19:2) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:0) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:1) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:2) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:3) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:4) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 0:20:5) found
[ 30.447] (WW) fglrx: No matching Device section for instance (BusID PCI:0 at 1:0:1) found
[ 30.448] (II) fglrx(0): pEnt->device->identifier=0x55c36676f720
[ 30.448] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[ 30.448] (II) fglrx(0): FB driver is not enabled
[ 30.448] (II) Loading sub module "vgahw"
[ 30.448] (II) LoadModule: "vgahw"
[ 30.449] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 30.478] (II) Module vgahw: vendor="X.Org Foundation"
[ 30.478] compiled for 1.16.4, module version = 0.1.0
[ 30.478] ABI class: X.Org Video Driver, version 18.0
[ 30.479] (II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.479] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[ 30.479] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 30.479] (==) fglrx(0): Default visual is TrueColor
[ 30.479] (==) fglrx(0): RGB weight 888
[ 30.479] (II) fglrx(0): Using 8 bits per RGB
[ 30.479] (==) fglrx(0): Buffer Tiling is ON
[ 30.480] (II) Loading sub module "fglrxdrm"
[ 30.480] (II) LoadModule: "fglrxdrm"
[ 30.480] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 30.480] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 30.480] compiled for 1.4.99.906, module version = 15.30.3
[ 30.484] ukiDynamicMajor: found major device number 247
[ 30.484] ukiDynamicMajor: found major device number 247
[ 30.484] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 30.484] ukiOpenDevice: node name is /dev/ati/card0
[ 30.484] ukiOpenDevice: open result is 11, (OK)
[ 30.578] ukiOpenByBusid: ukiOpenMinor returns 11
[ 30.578] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 30.578] (**) fglrx(0): NoAccel = NO
[ 30.578] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 30.578] (--) fglrx(0): Chipset: "AMD Radeon R7 200 Series " (Chipset = 0x6613)
[ 30.578] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2000)
[ 30.578] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 30.578] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 30.578] (--) fglrx(0): MMIO registers at 0xfdf80000
[ 30.578] (--) fglrx(0): I/O port at 0x0000ee00
[ 30.578] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 30.594] (II) fglrx(0): AC Adapter is used
[ 30.604] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 30.693] (II) Loading sub module "vbe"
[ 30.693] (II) LoadModule: "vbe"
[ 30.791] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 30.814] (II) Module vbe: vendor="X.Org Foundation"
[ 30.814] compiled for 1.16.4, module version = 1.1.0
[ 30.814] ABI class: X.Org Video Driver, version 18.0
[ 30.815] (II) fglrx(0): VESA BIOS detected
[ 30.815] (II) fglrx(0): VESA VBE Version 3.0
[ 30.815] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 30.815] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 30.815] (II) fglrx(0): VESA VBE OEM Software Rev: 15.49
[ 30.815] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 30.815] (II) fglrx(0): VESA VBE OEM Product: OLAND
[ 30.815] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 30.815] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 30.815] (--) fglrx(0): Video RAM: 2097152 kByte, Type: DDR3
[ 30.815] (II) fglrx(0): PCIE card detected
[ 30.815] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 30.815] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 30.815] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 30.816] (II) fglrx(0): RandR 1.2 support is enabled!
[ 30.816] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 30.816] (II) Loading sub module "fb"
[ 30.816] (II) LoadModule: "fb"
[ 30.816] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.862] (II) Module fb: vendor="X.Org Foundation"
[ 30.862] compiled for 1.16.4, module version = 1.0.0
[ 30.862] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.862] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 30.862] (II) Loading sub module "ddc"
[ 30.862] (II) LoadModule: "ddc"
[ 30.862] (II) Module "ddc" already built-in
[ 31.141] (II) fglrx(0): Output DFP1 has no monitor section
[ 31.141] (II) fglrx(0): Output DFP2 has no monitor section
[ 31.141] (II) fglrx(0): Output CRT1 has no monitor section
[ 31.141] (II) Loading sub module "ddc"
[ 31.141] (II) LoadModule: "ddc"
[ 31.141] (II) Module "ddc" already built-in
[ 31.141] (II) fglrx(0): Connected Display0: CRT1
[ 31.141] (II) fglrx(0): Display0 EDID data ---------------------------
[ 31.141] (II) fglrx(0): Manufacturer: GSM Model: 59c8 Serial#: 16843009
[ 31.141] (II) fglrx(0): Year: 2013 Week: 1
[ 31.141] (II) fglrx(0): EDID Version: 1.3
[ 31.141] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 31.141] (II) fglrx(0): Sync: Separate
[ 31.141] (II) fglrx(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 31.141] (II) fglrx(0): Gamma: 2.20
[ 31.141] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 31.141] (II) fglrx(0): First detailed timing is preferred mode
[ 31.141] (II) fglrx(0): redX: 0.638 redY: 0.334 greenX: 0.309 greenY: 0.627
[ 31.141] (II) fglrx(0): blueX: 0.153 blueY: 0.073 whiteX: 0.313 whiteY: 0.329
[ 31.141] (II) fglrx(0): Supported established timings:
[ 31.141] (II) fglrx(0): 720x400 at 70Hz
[ 31.141] (II) fglrx(0): 640x480 at 60Hz
[ 31.141] (II) fglrx(0): 640x480 at 75Hz
[ 31.141] (II) fglrx(0): 800x600 at 56Hz
[ 31.141] (II) fglrx(0): 800x600 at 60Hz
[ 31.141] (II) fglrx(0): 800x600 at 75Hz
[ 31.141] (II) fglrx(0): 832x624 at 75Hz
[ 31.141] (II) fglrx(0): 1024x768 at 60Hz
[ 31.141] (II) fglrx(0): 1024x768 at 75Hz
[ 31.141] (II) fglrx(0): Manufacturer's mask: 0
[ 31.141] (II) fglrx(0): Supported standard timings:
[ 31.141] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 31.141] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 31.141] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 31.141] (II) fglrx(0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 31.141] (II) fglrx(0): Supported detailed timing:
[ 31.141] (II) fglrx(0): clock: 85.5 MHz Image Size: 509 x 286 mm
[ 31.141] (II) fglrx(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 31.141] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 31.141] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 95 MHz
[ 31.141] (II) fglrx(0): Monitor name: 2D HD LG TV
[ 31.141] (II) fglrx(0): Serial No:
[ 31.141] (II) fglrx(0): EDID (in hex):
[ 31.141] (II) fglrx(0): 00ffffffffffff001e6dc85901010101
[ 31.141] (II) fglrx(0): 0117010368331d78ea6275a3554fa027
[ 31.142] (II) fglrx(0): 125054a76a00314f454f614f81000101
[ 31.142] (II) fglrx(0): 010101010101662156aa51001e30468f
[ 31.142] (II) fglrx(0): 3300fd1e1100001e000000fd00384b1e
[ 31.142] (II) fglrx(0): 3d09000a202020202020000000fc0032
[ 31.142] (II) fglrx(0): 44204844204c472054560a20000000ff
[ 31.142] (II) fglrx(0): 000a20202020202020202020202000b3
[ 31.142] (II) fglrx(0): End of Display0 EDID data --------------------
[ 31.142] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 31.142] (II) fglrx(0): EDID for output DFP1
[ 31.142] (II) fglrx(0): EDID for output DFP2
[ 31.142] (II) fglrx(0): EDID for output CRT1
[ 31.142] (II) fglrx(0): Manufacturer: GSM Model: 59c8 Serial#: 16843009
[ 31.142] (II) fglrx(0): Year: 2013 Week: 1
[ 31.142] (II) fglrx(0): EDID Version: 1.3
[ 31.142] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 31.142] (II) fglrx(0): Sync: Separate
[ 31.142] (II) fglrx(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 31.142] (II) fglrx(0): Gamma: 2.20
[ 31.142] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 31.142] (II) fglrx(0): First detailed timing is preferred mode
[ 31.142] (II) fglrx(0): redX: 0.638 redY: 0.334 greenX: 0.309 greenY: 0.627
[ 31.142] (II) fglrx(0): blueX: 0.153 blueY: 0.073 whiteX: 0.313 whiteY: 0.329
[ 31.142] (II) fglrx(0): Supported established timings:
[ 31.142] (II) fglrx(0): 720x400 at 70Hz
[ 31.142] (II) fglrx(0): 640x480 at 60Hz
[ 31.142] (II) fglrx(0): 640x480 at 75Hz
[ 31.142] (II) fglrx(0): 800x600 at 56Hz
[ 31.142] (II) fglrx(0): 800x600 at 60Hz
[ 31.142] (II) fglrx(0): 800x600 at 75Hz
[ 31.142] (II) fglrx(0): 832x624 at 75Hz
[ 31.142] (II) fglrx(0): 1024x768 at 60Hz
[ 31.142] (II) fglrx(0): 1024x768 at 75Hz
[ 31.142] (II) fglrx(0): Manufacturer's mask: 0
[ 31.142] (II) fglrx(0): Supported standard timings:
[ 31.142] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 31.142] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 31.142] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 31.142] (II) fglrx(0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 31.142] (II) fglrx(0): Supported detailed timing:
[ 31.142] (II) fglrx(0): clock: 85.5 MHz Image Size: 509 x 286 mm
[ 31.142] (II) fglrx(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 31.142] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 31.142] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 95 MHz
[ 31.142] (II) fglrx(0): Monitor name: 2D HD LG TV
[ 31.142] (II) fglrx(0): Serial No:
[ 31.142] (II) fglrx(0): EDID (in hex):
[ 31.142] (II) fglrx(0): 00ffffffffffff001e6dc85901010101
[ 31.142] (II) fglrx(0): 0117010368331d78ea6275a3554fa027
[ 31.142] (II) fglrx(0): 125054a76a00314f454f614f81000101
[ 31.142] (II) fglrx(0): 010101010101662156aa51001e30468f
[ 31.142] (II) fglrx(0): 3300fd1e1100001e000000fd00384b1e
[ 31.142] (II) fglrx(0): 3d09000a202020202020000000fc0032
[ 31.142] (II) fglrx(0): 44204844204c472054560a20000000ff
[ 31.142] (II) fglrx(0): 000a20202020202020202020202000b3
[ 31.142] (II) fglrx(0): Printing probed modes for output CRT1
[ 31.142] (II) fglrx(0): Modeline "1366x768"x60.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 31.142] (II) fglrx(0): Modeline "1360x768"x60.0 85.50 1360 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz e)
[ 31.142] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 31.142] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352 1480 1680 768 803 809 831 -hsync +vsync (49.7 kHz e)
[ 31.142] (II) fglrx(0): Modeline "1280x720"x60.0 83.50 1280 1352 1480 1680 720 803 809 831 -hsync +vsync (49.7 kHz e)
[ 31.142] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 31.142] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 31.142] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 31.142] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 31.142] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 31.142] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 31.142] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 31.142] (II) fglrx(0): Output DFP1 disconnected
[ 31.142] (II) fglrx(0): Output DFP2 disconnected
[ 31.142] (II) fglrx(0): Output CRT1 connected
[ 31.142] (II) fglrx(0): Using exact sizes for initial modes
[ 31.142] (II) fglrx(0): Output CRT1 using initial mode 1366x768
[ 31.142] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 31.142] (II) fglrx(0): DPI set to (96, 96)
[ 31.142] (II) fglrx(0): Adapter AMD Radeon R7 200 Series has 2 configurable heads and 1 displays connected.
[ 31.142] (==) fglrx(0): PseudoColor visuals disabled
[ 31.142] (II) Loading sub module "ramdac"
[ 31.142] (II) LoadModule: "ramdac"
[ 31.142] (II) Module "ramdac" already built-in
[ 31.142] (==) fglrx(0): NoDRI = NO
[ 31.142] (==) fglrx(0): Capabilities: 0x00000000
[ 31.142] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 31.142] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 31.142] (==) fglrx(0): UseFastTLS=0
[ 31.142] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 31.142] (--) Depth 24 pixmap format is 32 bpp
[ 31.143] (II) fglrx(0): doing swlDriScreenInit
[ 31.143] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 31.143] ukiDynamicMajor: found major device number 247
[ 31.143] ukiDynamicMajor: found major device number 247
[ 31.143] ukiDynamicMajor: found major device number 247
[ 31.143] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 31.143] ukiOpenDevice: node name is /dev/ati/card0
[ 31.143] ukiOpenDevice: open result is 12, (OK)
[ 31.143] ukiOpenByBusid: ukiOpenMinor returns 12
[ 31.143] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 31.143] (II) fglrx(0): [uki] DRM interface version 1.0
[ 31.143] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 31.143] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 31.143] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fbe7b31f000
[ 31.143] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 31.143] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 31.143] (II) fglrx(0): swlDriScreenInit done
[ 31.143] (II) fglrx(0): Kernel Module Version Information:
[ 31.143] (II) fglrx(0): Name: fglrx
[ 31.143] (II) fglrx(0): Version: 15.30.3
[ 31.143] (II) fglrx(0): Date: Dec 17 2015
[ 31.143] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 31.143] (II) fglrx(0): Kernel Module version matches driver.
[ 31.143] (II) fglrx(0): Kernel Module Build Time Information:
[ 31.143] (II) fglrx(0): Build-Kernel UTS_RELEASE: 4.6.0-0.bpo.1-amd64
[ 31.143] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 31.143] (II) fglrx(0): Build-Kernel __SMP__: no
[ 31.143] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 31.143] (II) fglrx(0): [uki] register handle = 0x00004000
[ 31.146] (II) fglrx(0): DRI initialization successfull
[ 31.190] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01080000
[ 31.390] (==) fglrx(0): Backing store enabled
[ 31.390] (==) fglrx(0): DPMS enabled
[ 31.391] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 31.391] (**) fglrx(0): Textured Video is enabled.
[ 31.391] (II) LoadModule: "glesx"
[ 31.391] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 31.556] (II) Module glesx: vendor="X.Org Foundation"
[ 31.556] compiled for 1.4.99.906, module version = 1.0.0
[ 31.556] (II) fglrx(0): GLESX enableFlags = 8784
[ 31.557] (II) fglrx(0): GLESX is enabled
[ 31.557] (II) LoadModule: "amdxmm"
[ 31.558] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 31.575] (II) Module amdxmm: vendor="X.Org Foundation"
[ 31.575] compiled for 1.4.99.906, module version = 2.0.0
[ 31.774] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 31.784] (II) fglrx(0): Enable composite support successfully
[ 31.784] (II) fglrx(0): X context handle = 0x1
[ 31.784] (II) fglrx(0): [DRI] installation complete
[ 31.784] (==) fglrx(0): Silken mouse enabled
[ 31.785] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 31.785] (II) fglrx(0): LPT is disabled by configure option
[ 31.785] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 31.905] (--) RandR disabled
[ 31.929] (II) SELinux: Disabled on system
[ 31.930] ukiDynamicMajor: found major device number 247
[ 31.930] ukiDynamicMajor: found major device number 247
[ 31.930] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 31.930] ukiOpenDevice: node name is /dev/ati/card0
[ 31.930] ukiOpenDevice: open result is 13, (OK)
[ 31.930] ukiOpenByBusid: ukiOpenMinor returns 13
[ 31.930] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 32.229] ukiDynamicMajor: found major device number 247
[ 32.229] ukiDynamicMajor: found major device number 247
[ 32.229] ukiDynamicMajor: found major device number 247
[ 32.229] ukiOpenDevice: node name is /dev/ati/card0
[ 32.229] ukiOpenDevice: open result is 14, (OK)
[ 32.229] ukiGetBusid returned 'PCI:1:0:0'
[ 32.229] ukiOpenDevice: node name is /dev/ati/card1
[ 32.229] ukiOpenDevice: open result is -1, (No such device)
[ 32.229] ukiOpenDevice: open result is -1, (No such device)
[ 32.229] ukiOpenDevice: Open failed
[ 32.229] ukiOpenDevice: node name is /dev/ati/card2
[ 32.229] ukiOpenDevice: open result is -1, (No such device)
[ 32.229] ukiOpenDevice: open result is -1, (No such device)
[ 32.229] ukiOpenDevice: Open failed
[ 32.229] ukiOpenDevice: node name is /dev/ati/card3
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: Open failed
[ 32.230] ukiOpenDevice: node name is /dev/ati/card4
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: Open failed
[ 32.230] ukiOpenDevice: node name is /dev/ati/card5
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: Open failed
[ 32.230] ukiOpenDevice: node name is /dev/ati/card6
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: Open failed
[ 32.230] ukiOpenDevice: node name is /dev/ati/card7
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: Open failed
[ 32.230] ukiOpenDevice: node name is /dev/ati/card8
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: Open failed
[ 32.230] ukiOpenDevice: node name is /dev/ati/card9
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: Open failed
[ 32.230] ukiOpenDevice: node name is /dev/ati/card10
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.230] ukiOpenDevice: Open failed
[ 32.230] ukiOpenDevice: node name is /dev/ati/card11
[ 32.230] ukiOpenDevice: open result is -1, (No such device)
[ 32.231] ukiOpenDevice: open result is -1, (No such device)
[ 32.231] ukiOpenDevice: Open failed
[ 32.231] ukiOpenDevice: node name is /dev/ati/card12
[ 32.231] ukiOpenDevice: open result is -1, (No such device)
[ 32.231] ukiOpenDevice: open result is -1, (No such device)
[ 32.231] ukiOpenDevice: Open failed
[ 32.231] ukiOpenDevice: node name is /dev/ati/card13
[ 32.231] ukiOpenDevice: open result is -1, (No such device)
[ 32.231] ukiOpenDevice: open result is -1, (No such device)
[ 32.231] ukiOpenDevice: Open failed
[ 32.231] ukiOpenDevice: node name is /dev/ati/card14
[ 32.231] ukiOpenDevice: open result is -1, (No such device)
[ 32.231] ukiOpenDevice: open result is -1, (No such device)
[ 32.231] ukiOpenDevice: Open failed
[ 32.231] ukiOpenDevice: node name is /dev/ati/card15
[ 32.231] ukiOpenDevice: open result is -1, (No such device)
[ 32.231] ukiOpenDevice: open result is -1, (No such device)
[ 32.231] ukiOpenDevice: Open failed
[ 32.231] ukiDynamicMajor: found major device number 247
[ 32.231] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 32.231] ukiOpenDevice: node name is /dev/ati/card0
[ 32.231] ukiOpenDevice: open result is 14, (OK)
[ 32.231] ukiOpenByBusid: ukiOpenMinor returns 14
[ 32.231] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 32.807] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 32.808] ukiDynamicMajor: found major device number 247
[ 32.809] ukiDynamicMajor: found major device number 247
[ 32.809] ukiDynamicMajor: found major device number 247
[ 32.809] ukiOpenDevice: node name is /dev/ati/card0
[ 32.809] ukiOpenDevice: open result is 15, (OK)
[ 32.809] ukiGetBusid returned 'PCI:1:0:0'
[ 32.809] ukiOpenDevice: node name is /dev/ati/card1
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card2
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card3
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card4
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card5
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card6
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card7
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card8
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card9
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card10
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card11
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card12
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card13
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card14
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.809] ukiOpenDevice: node name is /dev/ati/card15
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: open result is -1, (No such device)
[ 32.809] ukiOpenDevice: Open failed
[ 32.810] ukiDynamicMajor: found major device number 247
[ 32.810] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 32.810] ukiOpenDevice: node name is /dev/ati/card0
[ 32.810] ukiOpenDevice: open result is 15, (OK)
[ 32.810] ukiOpenByBusid: ukiOpenMinor returns 15
[ 32.810] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 32.995] (II) fglrx(0): OverDrive5 Detected!
[ 33.001] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 33.773] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 33.774] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 33.774] (II) LoadModule: "evdev"
[ 33.774] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 33.835] (II) Module evdev: vendor="X.Org Foundation"
[ 33.835] compiled for 1.16.0, module version = 2.9.0
[ 33.835] Module class: X.Org XInput Driver
[ 33.835] ABI class: X.Org XInput driver, version 21.0
[ 33.835] (II) Using input driver 'evdev' for 'Power Button'
[ 33.835] (**) Power Button: always reports core events
[ 33.835] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 33.835] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 33.835] (--) evdev: Power Button: Found keys
[ 33.835] (II) evdev: Power Button: Configuring as keyboard
[ 33.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 33.835] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 33.835] (**) Option "xkb_rules" "evdev"
[ 33.835] (**) Option "xkb_model" "pc105"
[ 33.835] (**) Option "xkb_layout" "br"
[ 33.835] (**) Option "xkb_variant" "abnt2"
[ 33.893] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 33.893] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 33.893] (II) Using input driver 'evdev' for 'Power Button'
[ 33.893] (**) Power Button: always reports core events
[ 33.893] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 33.893] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 33.893] (--) evdev: Power Button: Found keys
[ 33.893] (II) evdev: Power Button: Configuring as keyboard
[ 33.893] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 33.893] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 33.893] (**) Option "xkb_rules" "evdev"
[ 33.893] (**) Option "xkb_model" "pc105"
[ 33.893] (**) Option "xkb_layout" "br"
[ 33.893] (**) Option "xkb_variant" "abnt2"
[ 33.893] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[ 33.893] (II) No input driver specified, ignoring this device.
[ 33.893] (II) This device may have been added with another device file.
[ 33.894] (II) config/udev: Adding input device gspca_zc3xx (/dev/input/event15)
[ 33.894] (**) gspca_zc3xx: Applying InputClass "evdev keyboard catchall"
[ 33.894] (II) Using input driver 'evdev' for 'gspca_zc3xx'
[ 33.894] (**) gspca_zc3xx: always reports core events
[ 33.894] (**) evdev: gspca_zc3xx: Device: "/dev/input/event15"
[ 33.894] (--) evdev: gspca_zc3xx: Vendor 0xac8 Product 0x307b
[ 33.894] (--) evdev: gspca_zc3xx: Found keys
[ 33.894] (II) evdev: gspca_zc3xx: Configuring as keyboard
[ 33.894] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/input/input16/event15"
[ 33.894] (II) XINPUT: Adding extended input device "gspca_zc3xx" (type: KEYBOARD, id 8)
[ 33.894] (**) Option "xkb_rules" "evdev"
[ 33.894] (**) Option "xkb_model" "pc105"
[ 33.894] (**) Option "xkb_layout" "br"
[ 33.894] (**) Option "xkb_variant" "abnt2"
[ 33.894] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event0)
[ 33.894] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 33.894] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[ 33.894] (**) PIXART USB OPTICAL MOUSE: always reports core events
[ 33.894] (**) evdev: PIXART USB OPTICAL MOUSE: Device: "/dev/input/event0"
[ 33.894] (--) evdev: PIXART USB OPTICAL MOUSE: Vendor 0x93a Product 0x2510
[ 33.894] (--) evdev: PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[ 33.894] (--) evdev: PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[ 33.894] (--) evdev: PIXART USB OPTICAL MOUSE: Found relative axes
[ 33.894] (--) evdev: PIXART USB OPTICAL MOUSE: Found x and y relative axes
[ 33.894] (II) evdev: PIXART USB OPTICAL MOUSE: Configuring as mouse
[ 33.894] (II) evdev: PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[ 33.894] (**) evdev: PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 33.894] (**) evdev: PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 33.894] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/0003:093A:2510.0001/input/input1/event0"
[ 33.894] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 33.894] (II) evdev: PIXART USB OPTICAL MOUSE: initialized for relative axes.
[ 33.894] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 33.894] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 33.894] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 33.894] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 33.894] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[ 33.894] (II) No input driver specified, ignoring this device.
[ 33.894] (II) This device may have been added with another device file.
[ 33.895] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
[ 33.895] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 33.895] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 33.895] (**) USB Keyboard: always reports core events
[ 33.895] (**) evdev: USB Keyboard: Device: "/dev/input/event1"
[ 33.895] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1603
[ 33.895] (--) evdev: USB Keyboard: Found keys
[ 33.895] (II) evdev: USB Keyboard: Configuring as keyboard
[ 33.895] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/0003:1241:1603.0002/input/input2/event1"
[ 33.895] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 10)
[ 33.895] (**) Option "xkb_rules" "evdev"
[ 33.895] (**) Option "xkb_model" "pc105"
[ 33.895] (**) Option "xkb_layout" "br"
[ 33.895] (**) Option "xkb_variant" "abnt2"
[ 33.895] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2)
[ 33.895] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 33.895] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 33.895] (**) USB Keyboard: always reports core events
[ 33.895] (**) evdev: USB Keyboard: Device: "/dev/input/event2"
[ 33.895] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1603
[ 33.895] (--) evdev: USB Keyboard: Found keys
[ 33.895] (II) evdev: USB Keyboard: Configuring as keyboard
[ 33.895] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/0003:1241:1603.0003/input/input3/event2"
[ 33.895] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 11)
[ 33.895] (**) Option "xkb_rules" "evdev"
[ 33.895] (**) Option "xkb_model" "pc105"
[ 33.895] (**) Option "xkb_layout" "br"
[ 33.895] (**) Option "xkb_variant" "abnt2"
[ 33.895] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
[ 33.895] (II) No input driver specified, ignoring this device.
[ 33.895] (II) This device may have been added with another device file.
[ 33.896] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event10)
[ 33.896] (II) No input driver specified, ignoring this device.
[ 33.896] (II) This device may have been added with another device file.
[ 33.896] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event11)
[ 33.896] (II) No input driver specified, ignoring this device.
[ 33.896] (II) This device may have been added with another device file.
[ 33.896] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event12)
[ 33.896] (II) No input driver specified, ignoring this device.
[ 33.896] (II) This device may have been added with another device file.
[ 33.896] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event13)
[ 33.896] (II) No input driver specified, ignoring this device.
[ 33.896] (II) This device may have been added with another device file.
[ 33.896] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event14)
[ 33.896] (II) No input driver specified, ignoring this device.
[ 33.896] (II) This device may have been added with another device file.
[ 33.896] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
[ 33.896] (II) No input driver specified, ignoring this device.
[ 33.896] (II) This device may have been added with another device file.
[ 33.896] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event8)
[ 33.896] (II) No input driver specified, ignoring this device.
[ 33.896] (II) This device may have been added with another device file.
[ 33.896] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 33.897] (II) No input driver specified, ignoring this device.
[ 33.897] (II) This device may have been added with another device file.
[ 33.900] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 61.148] (II) fglrx(0): EDID vendor "GSM", prod id 22984
[ 61.148] (II) fglrx(0): Using EDID range info for horizontal sync
[ 61.148] (II) fglrx(0): Using EDID range info for vertical refresh
[ 61.149] (II) fglrx(0): Printing DDC gathered Modelines:
[ 61.149] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 61.149] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 61.149] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 61.149] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 61.149] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 61.149] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 61.149] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 61.149] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 61.149] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 61.149] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 61.149] (II) fglrx(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 67.960] ukiDynamicMajor: found major device number 247
[ 67.960] ukiDynamicMajor: found major device number 247
[ 67.960] ukiDynamicMajor: found major device number 247
[ 67.960] ukiOpenDevice: node name is /dev/ati/card0
[ 67.960] ukiOpenDevice: open result is 30, (OK)
[ 67.960] ukiGetBusid returned 'PCI:1:0:0'
[ 67.960] ukiOpenDevice: node name is /dev/ati/card1
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: Open failed
[ 67.960] ukiOpenDevice: node name is /dev/ati/card2
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: Open failed
[ 67.960] ukiOpenDevice: node name is /dev/ati/card3
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: Open failed
[ 67.960] ukiOpenDevice: node name is /dev/ati/card4
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: Open failed
[ 67.960] ukiOpenDevice: node name is /dev/ati/card5
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: Open failed
[ 67.960] ukiOpenDevice: node name is /dev/ati/card6
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: Open failed
[ 67.960] ukiOpenDevice: node name is /dev/ati/card7
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: Open failed
[ 67.960] ukiOpenDevice: node name is /dev/ati/card8
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: open result is -1, (No such device)
[ 67.960] ukiOpenDevice: Open failed
[ 67.960] ukiOpenDevice: node name is /dev/ati/card9
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: Open failed
[ 67.961] ukiOpenDevice: node name is /dev/ati/card10
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: Open failed
[ 67.961] ukiOpenDevice: node name is /dev/ati/card11
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: Open failed
[ 67.961] ukiOpenDevice: node name is /dev/ati/card12
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: Open failed
[ 67.961] ukiOpenDevice: node name is /dev/ati/card13
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: Open failed
[ 67.961] ukiOpenDevice: node name is /dev/ati/card14
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: Open failed
[ 67.961] ukiOpenDevice: node name is /dev/ati/card15
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: open result is -1, (No such device)
[ 67.961] ukiOpenDevice: Open failed
[ 67.961] ukiDynamicMajor: found major device number 247
[ 67.961] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 67.961] ukiOpenDevice: node name is /dev/ati/card0
[ 67.961] ukiOpenDevice: open result is 30, (OK)
[ 67.961] ukiOpenByBusid: ukiOpenMinor returns 30
[ 67.961] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 68.097] (II) fglrx(0): EDID vendor "GSM", prod id 22984
[ 68.097] (II) fglrx(0): Using hsync ranges from config file
[ 68.097] (II) fglrx(0): Using vrefresh ranges from config file
[ 68.097] (II) fglrx(0): Printing DDC gathered Modelines:
[ 68.097] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 68.097] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 68.097] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 68.097] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 68.097] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 68.097] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 68.097] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 68.097] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 68.097] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 68.097] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 68.097] (II) fglrx(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 97.813] (II) fglrx(0): EDID vendor "GSM", prod id 22984
[ 97.813] (II) fglrx(0): Using hsync ranges from config file
[ 97.813] (II) fglrx(0): Using vrefresh ranges from config file
[ 97.813] (II) fglrx(0): Printing DDC gathered Modelines:
[ 97.813] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 97.813] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 97.813] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 97.813] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 97.813] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 97.813] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 97.813] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 97.813] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 97.813] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 97.813] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 97.813] (II) fglrx(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 113.189] (II) fglrx(0): EDID vendor "GSM", prod id 22984
[ 113.189] (II) fglrx(0): Using hsync ranges from config file
[ 113.189] (II) fglrx(0): Using vrefresh ranges from config file
[ 113.189] (II) fglrx(0): Printing DDC gathered Modelines:
[ 113.189] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 113.189] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 113.189] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 113.189] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 113.189] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 113.189] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 113.189] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 113.189] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 113.189] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 113.189] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 113.189] (II) fglrx(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
Bug script output from package glx-alternative-fglrx:
Diversions:
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/libGL.so.1.2.0 to /usr/lib/mesa-diverted/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so to /usr/lib/mesa-diverted/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so to /usr/lib/mesa-diverted/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGLESv2.so.2 to /usr/lib/mesa-diverted/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
/usr/lib/mesa-diverted:
total 152
drwxr-xr-x 5 root root 4096 Aug 15 22:14 .
drwxr-xr-x 153 root root 135168 Aug 16 00:08 ..
drwxr-xr-x 2 root root 4096 Jun 23 13:45 arm-linux-gnueabihf
drwxr-xr-x 2 root root 4096 Aug 15 22:15 i386-linux-gnu
drwxr-xr-x 2 root root 4096 Aug 15 22:15 x86_64-linux-gnu
/usr/lib/mesa-diverted/i386-linux-gnu/:
total 452
drwxr-xr-x 2 root root 4096 Aug 15 22:15 .
drwxr-xr-x 5 root root 4096 Aug 15 22:14 ..
lrwxrwxrwx 1 root root 14 Apr 28 19:50 libGL.so.1 -> libGL.so.1.2.0
-rw-r--r-- 1 root root 448220 Apr 28 19:50 libGL.so.1.2.0
/usr/lib/mesa-diverted/x86_64-linux-gnu/:
total 684
drwxr-xr-x 2 root root 4096 Aug 15 22:15 .
drwxr-xr-x 5 root root 4096 Aug 15 22:14 ..
lrwxrwxrwx 1 root root 15 Apr 28 19:49 libEGL.so.1 -> libEGL.so.1.0.0
-rw-r--r-- 1 root root 186008 Apr 28 19:49 libEGL.so.1.0.0
lrwxrwxrwx 1 root root 14 Apr 28 19:49 libGL.so.1 -> libGL.so.1.2.0
-rw-r--r-- 1 root root 459448 Apr 28 19:49 libGL.so.1.2.0
lrwxrwxrwx 1 root root 18 Apr 28 19:49 libGLESv2.so.2 -> libGLESv2.so.2.0.0
-rw-r--r-- 1 root root 30520 Apr 28 19:49 libGLESv2.so.2.0.0
Alternative 'glx':
glx - auto mode
link currently points to /usr/lib/fglrx
/usr/lib/fglrx - priority 99
slave glx--fglrx-blacklists-radeon.conf: /etc/ati/fglrx-blacklists-radeon.conf
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libEGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
slave glx--libGLESv2.so.2-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2
slave glx--linux-libglx.so: /usr/lib/fglrx/fglrx-libglx.so
/usr/lib/fglrx/igpu - priority 90
slave glx--fglrx-blacklists-radeon.conf: /etc/ati/fglrx-blacklists-radeon.conf
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libEGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-i386-linux-gnu: /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
slave glx--libGLESv2.so.2-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2
/usr/lib/mesa-diverted - priority 5
slave glx--libEGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-i386-linux-gnu: /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
slave glx--libGLESv2.so.2-x86_64-linux-gnu: /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2
Current 'best' version is '/usr/lib/fglrx'.
lrwxrwxrwx 1 root root 14 Aug 16 00:08 /etc/alternatives/glx -> /usr/lib/fglrx
lrwxrwxrwx 1 root root 37 Aug 16 00:08 /etc/alternatives/glx--fglrx-blacklists-radeon.conf -> /etc/ati/fglrx-blacklists-radeon.conf
lrwxrwxrwx 1 root root 27 Aug 16 00:08 /etc/alternatives/glx--fglrx_drv.so -> /usr/lib/fglrx/fglrx_drv.so
lrwxrwxrwx 1 root root 51 Aug 16 00:08 /etc/alternatives/glx--libEGL.so.1-x86_64-linux-gnu -> /usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
lrwxrwxrwx 1 root root 42 Aug 16 00:08 /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
lrwxrwxrwx 1 root root 54 Aug 16 00:08 /etc/alternatives/glx--libGLESv2.so.2-x86_64-linux-gnu -> /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2
lrwxrwxrwx 1 root root 30 Aug 16 00:08 /etc/alternatives/glx--linux-libglx.so -> /usr/lib/fglrx/fglrx-libglx.so
File System:
lrwxrwxrwx 1 root root 21 Aug 15 22:15 /usr/lib/glx -> /etc/alternatives/glx
lrwxrwxrwx 1 root root 50 Aug 15 23:52 /usr/lib/x86_64-linux-gnu/libGL.so.1 -> /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu
-rw-r--r-- 1 root root 294312 Feb 10 2015 /usr/lib/xorg/modules/extensions/libglx.so
-- System Information:
Debian Release: 8.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.6.0-0.bpo.1-amd64 (SMP w/6 CPU cores)
Locale: LANG=pt_BR.UTF-8, LC_CTYPE=pt_BR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages fglrx-driver depends on:
ii debconf [debconf-2.0] 1.5.56
ii glx-alternative-fglrx 0.7.3~bpo8+1
ii libc6 2.19-18+deb8u4
ii libgl1-mesa-glx [libgl1] 11.1.3-1~bpo8+1
ii libstdc++6 4.9.2-10
ii libx11-6 2:1.6.2-3
ii libxext6 2:1.3.3-1
ii libxrandr2 2:1.4.2-1+b1
ii libxrender1 1:0.9.8-1+b1
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.4-1
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:15.12-2~bpo8+2
ii fglrx-kernel-4.6.0-0.bpo.1-amd64 [fglrx-ke 1:15.12-2~bpo8+2+4.6.4-1~bpo8+1
ii fglrx-modules-dkms [fglrx-kernel-15.12] 1:15.12-2~bpo8+2
ii libgl1-fglrx-glx 1:15.12-2~bpo8+2
pn libgl1-fglrx-glx-i386 <none>
Versions of packages fglrx-driver suggests:
ii amd-opencl-icd 1:15.9-4~deb8u2
pn fglrx-control <none>
ii libfglrx-amdxvba1 1:15.12-2~bpo8+2
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.19-18+deb8u4
ii libdrm-intel1 2.4.70-1~bpo8+1
ii libdrm2 2.4.70-1~bpo8+1
ii libpciaccess0 0.13.2-3+b1
ii libpixman-1-0 0.32.6-3
ii libudev1 215-17+deb8u4
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb-dri2-0 1.10-3+b1
ii libxcb-dri3-0 1.10-3+b1
ii libxcb-sync1 1.10-3+b1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.10-3+b1
ii libxcursor1 1:1.1.14-1+b1
ii libxdamage1 1:1.1.4-2+b1
ii libxext6 2:1.3.3-1
ii libxfixes3 1:5.0.1-2+b2
ii libxinerama1 2:1.1.3-1+b1
ii libxrandr2 2:1.4.2-1+b1
ii libxrender1 1:0.9.8-1+b1
ii libxshmfence1 1.1-4
ii libxss1 1:1.2.2-1
ii libxtst6 2:1.2.2-1+b1
ii libxv1 2:1.0.10-1+b1
ii libxvmc1 2:1.0.8-2+b1
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.4-1
Versions of packages libfglrx is related to:
pn ia32-libs <none>
ii libdrm-radeon1 2.4.70-1~bpo8+1
pn linux-headers <none>
ii xserver-xorg 1:7.7+7
ii xserver-xorg-core 2:1.16.4-1
ii xserver-xorg-video-ati 1:7.5.0-1
ii xserver-xorg-video-radeon 1:7.5.0-1
More information about the Pkg-fglrx-devel
mailing list