<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#ffffff" text="#000000">
Package: fglrx-driver<br>
Version: 1:11-7-4<br>
Severity: important<br>
<br>
Since driver 11-5, when we move the cursor at right bottom corner,
screen<br>
freezes entirely during a few seconds.<br>
A lot of my contacts have the same issue.<br>
I have a Radeon HD5770.<br>
<br>
I've seen this bug as a minor bug with KDE, but it is a major bug
for every<br>
environnement (I have Compiz, Openbox, Xfce, Awesome).<br>
<br>
Please forgive me if my english is bad, and thanks your awesome
work.<br>
<br>
<b>---</b><br>
<br>
<i><small>-- Package-specific info:<br>
VGA-compatible devices on PCI bus:<br>
02:00.0 VGA compatible controller: ATI Technologies Inc Juniper
[Radeon HD 5700 Series]<br>
<br>
DRM and fglrx Informations from dmesg:<br>
[ 0.000000] No AGP bridge found<br>
[ 0.000000] No AGP bridge found<br>
[ 0.684664] PCI-DMA: Disabling AGP.<br>
[ 0.684743] PCI-DMA: Reserving 64MB of IOMMU area in the AGP
aperture<br>
[ 0.936282] Linux agpgart interface v0.103<br>
[ 6.551383] fglrx: module license 'Proprietary. (C) 2002 -
ATI Technologies, Starnberg, GERMANY' taints kernel.<br>
[ 6.619714] [fglrx] Maximum main memory to use for locked dma
buffers: 3804 MBytes.<br>
[ 6.619782] [fglrx] vendor: 1002 device: 68b8 count: 1<br>
[ 6.620108] [fglrx] ioport: bar 4, base 0xe800, size: 0x100<br>
[ 6.620390] [fglrx] Kernel PAT support is enabled<br>
[ 6.620405] [fglrx] module loaded - fglrx 8.87.5 [Jul 7
2011] with 1 minors<br>
[ 28.594784] fglrx_pci 0000:02:00.0: irq 43 for MSI/MSI-X<br>
[ 28.595289] [fglrx] Firegl kernel thread PID: 2128<br>
[ 28.595327] [fglrx] Firegl kernel thread PID: 2129<br>
[ 28.595365] [fglrx] Firegl kernel thread PID: 2130<br>
[ 28.595552] [fglrx] IRQ 43 Enabled<br>
[ 28.806429] [fglrx] Gart USWC size:1240 M.<br>
[ 28.806432] [fglrx] Gart cacheable size:491 M.<br>
[ 28.806436] [fglrx] Reserved FB block: Shared offset:0,
size:1000000 <br>
[ 28.806438] [fglrx] Reserved FB block: Unshared
offset:f91d000, size:3e3000 <br>
[ 28.806440] [fglrx] Reserved FB block: Unshared
offset:3fff4000, size:c000 <br>
[22932.500052] [fglrx] IRQ 43 Disabled<br>
[22936.162112] fglrx_pci 0000:02:00.0: irq 43 for MSI/MSI-X<br>
[22936.162615] [fglrx] Firegl kernel thread PID: 30704<br>
[22936.162692] [fglrx] Firegl kernel thread PID: 30705<br>
[22936.162731] [fglrx] Firegl kernel thread PID: 30706<br>
[22936.162939] [fglrx] IRQ 43 Enabled<br>
[22936.299157] [fglrx] Gart USWC size:1240 M.<br>
[22936.299160] [fglrx] Gart cacheable size:491 M.<br>
[22936.299164] [fglrx] Reserved FB block: Shared offset:0,
size:1000000 <br>
[22936.299166] [fglrx] Reserved FB block: Unshared
offset:f91d000, size:3e3000 <br>
[22936.299168] [fglrx] Reserved FB block: Unshared
offset:3fff4000, size:c000 <br>
<br>
Xorg X server configuration file status:<br>
-rw-r--r-- 1 root root 684 Aug 1 19:04 /etc/X11/xorg.conf<br>
<br>
Contents of /etc/X11/xorg.conf:<br>
Section "ServerLayout"<br>
Identifier "aticonfig Layout"<br>
Screen 0 "aticonfig-Screen[0]-0" 0 0<br>
EndSection<br>
<br>
Section "Module"<br>
EndSection<br>
<br>
Section "Monitor"<br>
Identifier "aticonfig-Monitor[0]-0"<br>
Option "VendorName" "ATI Proprietary Driver"<br>
Option "ModelName" "Generic Autodetecting Monitor"<br>
Option "DPMS" "true"<br>
EndSection<br>
<br>
Section "Device"<br>
Identifier "aticonfig-Device[0]-0"<br>
Driver "fglrx"<br>
BusID "PCI:2:0:0"<br>
EndSection<br>
<br>
Section "Screen"<br>
Identifier "aticonfig-Screen[0]-0"<br>
Device "aticonfig-Device[0]-0"<br>
Monitor "aticonfig-Monitor[0]-0"<br>
DefaultDepth 24<br>
SubSection "Display"<br>
Viewport 0 0<br>
Depth 24<br>
EndSubSection<br>
EndSection<br>
<br>
<br>
<br>
Xorg X server log files on system:<br>
-rw-r--r-- 1 root root 46471 Aug 13 00:17 /var/log/Xorg.0.log<br>
<br>
Contents of most recent Xorg X server log file<br>
/var/log/Xorg.0.log:<br>
[ 22935.853] <br>
X.Org X Server 1.10.3<br>
Release Date: 2011-07-08<br>
[ 22935.853] X Protocol Version 11, Revision 0<br>
[ 22935.853] Build Operating System: Linux 3.0.0-rc6-amd64
x86_64 Debian<br>
[ 22935.853] Current Operating System: Linux debian
3.0.0-1-amd64 #1 SMP Sun Jul 24 02:24:44 UTC 2011 x86_64<br>
[ 22935.853] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64
root=UUID=4091a010-df3f-468f-9e1e-f38809621b8f ro quiet<br>
[ 22935.853] Build Date: 07 August 2011 06:45:11PM<br>
[ 22935.853] xorg-server 2:1.10.3-1 (Cyril Brulebois <a
class="moz-txt-link-rfc2396E" href="mailto:kibi@debian.org"><kibi@debian.org></a>)
<br>
[ 22935.853] Current version of pixman: 0.22.2<br>
[ 22935.853] Before reporting problems, check <a
class="moz-txt-link-freetext" href="http://wiki.x.org">http://wiki.x.org</a><br>
to make sure that you have the latest version.<br>
[ 22935.853] Markers: (--) probed, (**) from config file, (==)
default setting,<br>
(++) from command line, (!!) notice, (II) informational,<br>
(WW) warning, (EE) error, (NI) not implemented, (??)
unknown.<br>
[ 22935.854] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug
13 00:17:11 2011<br>
[ 22935.854] (==) Using config file: "/etc/X11/xorg.conf"<br>
[ 22935.854] (==) Using system config directory
"/usr/share/X11/xorg.conf.d"<br>
[ 22935.854] (==) ServerLayout "aticonfig Layout"<br>
[ 22935.854] (**) |-->Screen "aticonfig-Screen[0]-0" (0)<br>
[ 22935.854] (**) | |-->Monitor "aticonfig-Monitor[0]-0"<br>
[ 22935.854] (**) | |-->Device "aticonfig-Device[0]-0"<br>
[ 22935.854] (==) Automatically adding devices<br>
[ 22935.854] (==) Automatically enabling devices<br>
[ 22935.854] (WW) The directory "/usr/share/fonts/X11/cyrillic"
does not exist.<br>
[ 22935.854] Entry deleted from font path.<br>
[ 22935.854] (==) FontPath set to:<br>
/usr/share/fonts/X11/misc,<br>
/usr/share/fonts/X11/100dpi/:unscaled,<br>
/usr/share/fonts/X11/75dpi/:unscaled,<br>
/usr/share/fonts/X11/Type1,<br>
/usr/share/fonts/X11/100dpi,<br>
/usr/share/fonts/X11/75dpi,<br>
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,<br>
built-ins<br>
[ 22935.854] (==) ModulePath set to "/usr/lib/xorg/modules"<br>
[ 22935.854] (II) The server relies on udev to provide the list
of input devices.<br>
If no devices become available, reconfigure udev or disable
AutoAddDevices.<br>
[ 22935.854] (II) Loader magic: 0x7d7f20<br>
[ 22935.854] (II) Module ABI versions:<br>
[ 22935.854] X.Org ANSI C Emulation: 0.4<br>
[ 22935.854] X.Org Video Driver: 10.0<br>
[ 22935.854] X.Org XInput driver : 12.2<br>
[ 22935.854] X.Org Server Extension : 5.0<br>
[ 22935.855] (--) PCI:*(0:2:0:0) 1002:68b8:1002:2543 rev 0, Mem
@ 0xd0000000/268435456, 0xfbfc0000/131072, I/O @ 0x0000e800/256,
BIOS @ 0x????????/131072<br>
[ 22935.855] (II) Open ACPI successful (/var/run/acpid.socket)<br>
[ 22935.855] (II) "extmod" will be loaded by default.<br>
[ 22935.855] (II) "dbe" will be loaded by default.<br>
[ 22935.855] (II) "glx" will be loaded by default.<br>
[ 22935.855] (II) "record" will be loaded by default.<br>
[ 22935.855] (II) "dri" will be loaded by default.<br>
[ 22935.855] (II) "dri2" will be loaded by default.<br>
[ 22935.855] (II) LoadModule: "extmod"<br>
[ 22935.855] (II) Loading
/usr/lib/xorg/modules/extensions/libextmod.so<br>
[ 22935.856] (II) Module extmod: vendor="X.Org Foundation"<br>
[ 22935.856] compiled for 1.10.3, module version = 1.0.0<br>
[ 22935.856] Module class: X.Org Server Extension<br>
[ 22935.856] ABI class: X.Org Server Extension, version 5.0<br>
[ 22935.856] (II) Loading extension SELinux<br>
[ 22935.856] (II) Loading extension MIT-SCREEN-SAVER<br>
[ 22935.856] (II) Loading extension XFree86-VidModeExtension<br>
[ 22935.856] (II) Loading extension XFree86-DGA<br>
[ 22935.856] (II) Loading extension DPMS<br>
[ 22935.856] (II) Loading extension XVideo<br>
[ 22935.856] (II) Loading extension XVideo-MotionCompensation<br>
[ 22935.856] (II) Loading extension X-Resource<br>
[ 22935.856] (II) LoadModule: "dbe"<br>
[ 22935.856] (II) Loading
/usr/lib/xorg/modules/extensions/libdbe.so<br>
[ 22935.856] (II) Module dbe: vendor="X.Org Foundation"<br>
[ 22935.856] compiled for 1.10.3, module version = 1.0.0<br>
[ 22935.856] Module class: X.Org Server Extension<br>
[ 22935.856] ABI class: X.Org Server Extension, version 5.0<br>
[ 22935.856] (II) Loading extension DOUBLE-BUFFER<br>
[ 22935.856] (II) LoadModule: "glx"<br>
[ 22935.856] (II) Loading
/usr/lib/xorg/modules/extensions/libglx.so<br>
[ 22935.856] (II) Module glx: vendor="FireGL - ATI Technologies
Inc."<br>
[ 22935.856] compiled for 6.9.0, module version = 1.0.0<br>
[ 22935.856] (II) Loading extension GLX<br>
[ 22935.856] (II) LoadModule: "record"<br>
[ 22935.856] (II) Loading
/usr/lib/xorg/modules/extensions/librecord.so<br>
[ 22935.856] (II) Module record: vendor="X.Org Foundation"<br>
[ 22935.856] compiled for 1.10.3, module version = 1.13.0<br>
[ 22935.856] Module class: X.Org Server Extension<br>
[ 22935.856] ABI class: X.Org Server Extension, version 5.0<br>
[ 22935.856] (II) Loading extension RECORD<br>
[ 22935.857] (II) LoadModule: "dri"<br>
[ 22935.857] (II) Loading
/usr/lib/xorg/modules/extensions/libdri.so<br>
[ 22935.857] (II) Module dri: vendor="X.Org Foundation"<br>
[ 22935.857] compiled for 1.10.3, module version = 1.0.0<br>
[ 22935.857] ABI class: X.Org Server Extension, version 5.0<br>
[ 22935.857] (II) Loading extension XFree86-DRI<br>
[ 22935.857] (II) LoadModule: "dri2"<br>
[ 22935.857] (II) Loading
/usr/lib/xorg/modules/extensions/libdri2.so<br>
[ 22935.857] (II) Module dri2: vendor="X.Org Foundation"<br>
[ 22935.857] compiled for 1.10.3, module version = 1.2.0<br>
[ 22935.857] ABI class: X.Org Server Extension, version 5.0<br>
[ 22935.857] (II) Loading extension DRI2<br>
[ 22935.857] (II) LoadModule: "fglrx"<br>
[ 22935.857] (II) Loading
/usr/lib/xorg/modules/drivers/fglrx_drv.so<br>
[ 22935.871] (II) Module fglrx: vendor="FireGL - ATI
Technologies Inc."<br>
[ 22935.871] compiled for 1.4.99.906, module version =
8.87.5<br>
[ 22935.871] Module class: X.Org Video Driver<br>
[ 22935.871] (II) Loading sub module "fglrxdrm"<br>
[ 22935.871] (II) LoadModule: "fglrxdrm"<br>
[ 22935.871] (II) Loading
/usr/lib/xorg/modules/linux/libfglrxdrm.so<br>
[ 22935.872] (II) Module fglrxdrm: vendor="FireGL - ATI
Technologies Inc."<br>
[ 22935.872] compiled for 1.4.99.906, module version =
8.87.5<br>
[ 22935.872] (II) ATI Proprietary Linux Driver Version
Identifier:8.87.5<br>
[ 22935.872] (II) ATI Proprietary Linux Driver Release
Identifier: 8.872 <br>
[ 22935.872] (II) ATI Proprietary Linux Driver Build Date: Jul
7 2011 22:42:39<br>
[ 22935.872] (--) using VT number 7<br>
<br>
[ 22935.875] (WW) Falling back to old probe method for fglrx<br>
[ 22935.881] (II) Loading PCS database from /etc/ati/amdpcsdb<br>
[ 22935.881] (--) Chipset Supported AMD Graphics Processor
(0x68B8) found<br>
[ 22935.881] (WW) fglrx: No matching Device section for instance
(BusID PCI:0@2:0:1) found<br>
[ 22935.882] (II) AMD Video driver is running on a device
belonging to a group targeted for this release<br>
[ 22935.882] (II) AMD Video driver is signed<br>
[ 22935.882] (II) Loading
/usr/lib/xorg/modules/drivers/fglrx_drv.so<br>
[ 22935.882] (II) Loading
/usr/lib/xorg/modules/linux/libfglrxdrm.so<br>
[ 22935.882] (II) fglrx(0):
pEnt->device->identifier=0x1fa0680<br>
[ 22935.882] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] ===
begin<br>
[ 22935.882] (II) Loading sub module "vgahw"<br>
[ 22935.882] (II) LoadModule: "vgahw"<br>
[ 22935.882] (II) Loading /usr/lib/xorg/modules/libvgahw.so<br>
[ 22935.882] (II) Module vgahw: vendor="X.Org Foundation"<br>
[ 22935.882] compiled for 1.10.3, module version = 0.1.0<br>
[ 22935.882] ABI class: X.Org Video Driver, version 10.0<br>
[ 22935.882] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32<br>
[ 22935.882] (II) fglrx(0): Pixel depth = 24 bits stored in 4
bytes (32 bpp pixmaps)<br>
[ 22935.882] (==) fglrx(0): Default visual is TrueColor<br>
[ 22935.882] (**) fglrx(0): Option "DPMS" "true"<br>
[ 22935.882] (==) fglrx(0): RGB weight 888<br>
[ 22935.882] (II) fglrx(0): Using 8 bits per RGB <br>
[ 22935.882] (==) fglrx(0): Buffer Tiling is ON<br>
[ 22935.883] (II) Loading sub module "fglrxdrm"<br>
[ 22935.883] (II) LoadModule: "fglrxdrm"<br>
[ 22935.883] (II) Loading
/usr/lib/xorg/modules/linux/libfglrxdrm.so<br>
[ 22935.883] (II) Module fglrxdrm: vendor="FireGL - ATI
Technologies Inc."<br>
[ 22935.883] compiled for 1.4.99.906, module version =
8.87.5<br>
[ 22935.884] ukiDynamicMajor: found major device number 251<br>
[ 22935.884] ukiDynamicMajor: found major device number 251<br>
[ 22935.884] ukiOpenByBusid: Searching for BusID PCI:2:0:0<br>
[ 22935.884] ukiOpenDevice: node name is /dev/ati/card0<br>
[ 22935.884] ukiOpenDevice: open result is 11, (OK)<br>
[ 22935.884] ukiOpenByBusid: ukiOpenMinor returns 11<br>
[ 22935.884] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0<br>
[ 22935.884] (==) fglrx(0): NoAccel = NO<br>
[ 22935.884] (==) fglrx(0): ATI 2D Acceleration Architecture
enabled<br>
[ 22935.884] (--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series"
(Chipset = 0x68b8)<br>
[ 22935.884] (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice
= 0x2543)<br>
[ 22935.884] (==) fglrx(0): board vendor info: original ATI
graphics adapter<br>
[ 22935.884] (--) fglrx(0): Linear framebuffer (phys) at
0xd0000000<br>
[ 22935.884] (--) fglrx(0): MMIO registers at 0xfbfc0000<br>
[ 22935.884] (--) fglrx(0): I/O port at 0x0000e800<br>
[ 22935.884] (==) fglrx(0): ROM-BIOS at 0x000c0000<br>
[ 22935.885] (II) fglrx(0): AC Adapter is used<br>
[ 22935.895] (II) fglrx(0): Primary V_BIOS segment is: 0xc000<br>
[ 22935.969] (II) Loading sub module "vbe"<br>
[ 22935.969] (II) LoadModule: "vbe"<br>
[ 22935.969] (II) Loading /usr/lib/xorg/modules/libvbe.so<br>
[ 22935.969] (II) Module vbe: vendor="X.Org Foundation"<br>
[ 22935.969] compiled for 1.10.3, module version = 1.1.0<br>
[ 22935.969] ABI class: X.Org Video Driver, version 10.0<br>
[ 22935.969] (II) fglrx(0): VESA BIOS detected<br>
[ 22935.969] (II) fglrx(0): VESA VBE Version 3.0<br>
[ 22935.969] (II) fglrx(0): VESA VBE Total Mem: 16384 kB<br>
[ 22935.969] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS<br>
[ 22935.969] (II) fglrx(0): VESA VBE OEM Software Rev: 12.12<br>
[ 22935.969] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005,
ATI Technologies Inc. <br>
[ 22935.969] (II) fglrx(0): VESA VBE OEM Product: JUNIPER<br>
[ 22935.969] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00<br>
[ 22935.995] (II) fglrx(0): ATI Video BIOS revision 9 or later
detected<br>
[ 22935.995] (--) fglrx(0): Video RAM: 1048576 kByte, Type:
GDDR5<br>
[ 22935.995] (II) fglrx(0): PCIE card detected<br>
[ 22935.995] (--) fglrx(0): Using per-process page tables (PPPT)
as GART.<br>
[ 22935.995] (II) fglrx(0): board/chipset is supported by this
driver (original ATI board)<br>
[ 22935.998] (II) fglrx(0): Using adapter: 2:0.0.<br>
[ 22936.128] (II) fglrx(0): [FB] MC range(MCFBBase =
0xf00000000, MCFBSize = 0x40000000)<br>
[ 22936.162] (II) fglrx(0): Interrupt handler installed at IRQ
43.<br>
[ 22936.163] (II) fglrx(0): RandR 1.2 support is enabled!<br>
[ 22936.163] (II) fglrx(0): RandR 1.2 rotation support is
enabled!<br>
[ 22936.163] (==) fglrx(0): Center Mode is disabled <br>
[ 22936.163] (II) Loading sub module "fb"<br>
[ 22936.163] (II) LoadModule: "fb"<br>
[ 22936.163] (II) Loading /usr/lib/xorg/modules/libfb.so<br>
[ 22936.163] (II) Module fb: vendor="X.Org Foundation"<br>
[ 22936.163] compiled for 1.10.3, module version = 1.0.0<br>
[ 22936.163] ABI class: X.Org ANSI C Emulation, version 0.4<br>
[ 22936.163] (II) Loading sub module "ddc"<br>
[ 22936.163] (II) LoadModule: "ddc"<br>
[ 22936.163] (II) Module "ddc" already built-in<br>
[ 22936.288] (II) fglrx(0): Finished Initialize PPLIB!<br>
[ 22936.288] (II) fglrx(0): Output DFP1 using monitor section
aticonfig-Monitor[0]-0<br>
[ 22936.288] (II) fglrx(0): Output DFP2 has no monitor section<br>
[ 22936.288] (II) fglrx(0): Output DFP3 has no monitor section<br>
[ 22936.288] (II) fglrx(0): Output DFP4 has no monitor section<br>
[ 22936.288] (II) fglrx(0): Output CRT1 has no monitor section<br>
[ 22936.288] (II) fglrx(0): Output CRT2 has no monitor section<br>
[ 22936.288] (II) Loading sub module "ddc"<br>
[ 22936.288] (II) LoadModule: "ddc"<br>
[ 22936.288] (II) Module "ddc" already built-in<br>
[ 22936.288] (II) fglrx(0): Connected Display0: DFP4<br>
[ 22936.288] (II) fglrx(0): Display0 EDID data
---------------------------<br>
[ 22936.288] (II) fglrx(0): Manufacturer: SAM Model: 5fb
Serial#: 1162228275<br>
[ 22936.288] (II) fglrx(0): Year: 2010 Week: 3<br>
[ 22936.288] (II) fglrx(0): EDID Version: 1.3<br>
[ 22936.288] (II) fglrx(0): Digital Display Input<br>
[ 22936.288] (II) fglrx(0): Max Image Size [cm]: horiz.: 51
vert.: 29<br>
[ 22936.288] (II) fglrx(0): Gamma: 2.20<br>
[ 22936.288] (II) fglrx(0): DPMS capabilities: Off<br>
[ 22936.288] (II) fglrx(0): Supported color encodings: RGB 4:4:4
YCrCb 4:4:4 <br>
[ 22936.288] (II) fglrx(0): First detailed timing is preferred
mode<br>
[ 22936.288] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX:
0.300 greenY: 0.600<br>
[ 22936.288] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX:
0.312 whiteY: 0.329<br>
[ 22936.288] (II) fglrx(0): Supported established timings:<br>
[ 22936.288] (II) fglrx(0): 640x480@60Hz<br>
[ 22936.288] (II) fglrx(0): 800x600@56Hz<br>
[ 22936.288] (II) fglrx(0): 800x600@60Hz<br>
[ 22936.288] (II) fglrx(0): 1024x768@60Hz<br>
[ 22936.288] (II) fglrx(0): Manufacturer's mask: 0<br>
[ 22936.288] (II) fglrx(0): Supported standard timings:<br>
[ 22936.288] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh:
60 vid: 129<br>
[ 22936.288] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh:
60 vid: 16513<br>
[ 22936.288] (II) fglrx(0): #2: hsize: 1280 vsize 1024
refresh: 60 vid: 32897<br>
[ 22936.288] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh:
60 vid: 149<br>
[ 22936.288] (II) fglrx(0): #4: hsize: 1600 vsize 1200
refresh: 60 vid: 16553<br>
[ 22936.288] (II) fglrx(0): #5: hsize: 1680 vsize 1050
refresh: 60 vid: 179<br>
[ 22936.288] (II) fglrx(0): Supported detailed timing:<br>
[ 22936.288] (II) fglrx(0): clock: 148.5 MHz Image Size: 510
x 287 mm<br>
[ 22936.288] (II) fglrx(0): h_active: 1920 h_sync: 2008
h_sync_end 2052 h_blank_end 2200 h_border: 0<br>
[ 22936.288] (II) fglrx(0): v_active: 1080 v_sync: 1084
v_sync_end 1089 v_blanking: 1125 v_border: 0<br>
[ 22936.288] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H
min: 30 H max: 81 kHz, PixClock max 175 MHz<br>
[ 22936.288] (II) fglrx(0): Monitor name: SyncMaster<br>
[ 22936.288] (II) fglrx(0): Serial No: H9MZ107086<br>
[ 22936.288] (II) fglrx(0): EDID (in hex):<br>
[ 22936.288] (II) fglrx(0): 00ffffffffffff004c2dfb0533324645<br>
[ 22936.288] (II) fglrx(0): 0314010380331d782aee91a3544c9926<br>
[ 22936.288] (II) fglrx(0): 0f50542308008100814081809500a940<br>
[ 22936.288] (II) fglrx(0): b30001010101023a801871382d40582c<br>
[ 22936.288] (II) fglrx(0): 4500fe1f1100001e000000fd00383c1e<br>
[ 22936.288] (II) fglrx(0): 5111000a202020202020000000fc0053<br>
[ 22936.288] (II) fglrx(0): 796e634d61737465720a2020000000ff<br>
[ 22936.288] (II) fglrx(0): 0048394d5a3130373038360a20200089<br>
[ 22936.288] (II) fglrx(0): End of Display0 EDID data
--------------------<br>
[ 22936.297] (II) fglrx(0): EDID for output DFP1<br>
[ 22936.297] (II) fglrx(0): EDID for output DFP2<br>
[ 22936.297] (II) fglrx(0): EDID for output DFP3<br>
[ 22936.297] (II) fglrx(0): EDID for output DFP4<br>
[ 22936.297] (II) fglrx(0): Manufacturer: SAM Model: 5fb
Serial#: 1162228275<br>
[ 22936.297] (II) fglrx(0): Year: 2010 Week: 3<br>
[ 22936.297] (II) fglrx(0): EDID Version: 1.3<br>
[ 22936.297] (II) fglrx(0): Digital Display Input<br>
[ 22936.297] (II) fglrx(0): Max Image Size [cm]: horiz.: 51
vert.: 29<br>
[ 22936.298] (II) fglrx(0): Gamma: 2.20<br>
[ 22936.298] (II) fglrx(0): DPMS capabilities: Off<br>
[ 22936.298] (II) fglrx(0): Supported color encodings: RGB 4:4:4
YCrCb 4:4:4 <br>
[ 22936.298] (II) fglrx(0): First detailed timing is preferred
mode<br>
[ 22936.298] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX:
0.300 greenY: 0.600<br>
[ 22936.298] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX:
0.312 whiteY: 0.329<br>
[ 22936.298] (II) fglrx(0): Supported established timings:<br>
[ 22936.298] (II) fglrx(0): 640x480@60Hz<br>
[ 22936.298] (II) fglrx(0): 800x600@56Hz<br>
[ 22936.298] (II) fglrx(0): 800x600@60Hz<br>
[ 22936.298] (II) fglrx(0): 1024x768@60Hz<br>
[ 22936.298] (II) fglrx(0): Manufacturer's mask: 0<br>
[ 22936.298] (II) fglrx(0): Supported standard timings:<br>
[ 22936.298] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh:
60 vid: 129<br>
[ 22936.298] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh:
60 vid: 16513<br>
[ 22936.298] (II) fglrx(0): #2: hsize: 1280 vsize 1024
refresh: 60 vid: 32897<br>
[ 22936.298] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh:
60 vid: 149<br>
[ 22936.298] (II) fglrx(0): #4: hsize: 1600 vsize 1200
refresh: 60 vid: 16553<br>
[ 22936.298] (II) fglrx(0): #5: hsize: 1680 vsize 1050
refresh: 60 vid: 179<br>
[ 22936.298] (II) fglrx(0): Supported detailed timing:<br>
[ 22936.298] (II) fglrx(0): clock: 148.5 MHz Image Size: 510
x 287 mm<br>
[ 22936.298] (II) fglrx(0): h_active: 1920 h_sync: 2008
h_sync_end 2052 h_blank_end 2200 h_border: 0<br>
[ 22936.298] (II) fglrx(0): v_active: 1080 v_sync: 1084
v_sync_end 1089 v_blanking: 1125 v_border: 0<br>
[ 22936.298] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H
min: 30 H max: 81 kHz, PixClock max 175 MHz<br>
[ 22936.298] (II) fglrx(0): Monitor name: SyncMaster<br>
[ 22936.298] (II) fglrx(0): Serial No: H9MZ107086<br>
[ 22936.298] (II) fglrx(0): EDID (in hex):<br>
[ 22936.298] (II) fglrx(0): 00ffffffffffff004c2dfb0533324645<br>
[ 22936.298] (II) fglrx(0): 0314010380331d782aee91a3544c9926<br>
[ 22936.298] (II) fglrx(0): 0f50542308008100814081809500a940<br>
[ 22936.298] (II) fglrx(0): b30001010101023a801871382d40582c<br>
[ 22936.298] (II) fglrx(0): 4500fe1f1100001e000000fd00383c1e<br>
[ 22936.298] (II) fglrx(0): 5111000a202020202020000000fc0053<br>
[ 22936.298] (II) fglrx(0): 796e634d61737465720a2020000000ff<br>
[ 22936.298] (II) fglrx(0): 0048394d5a3130373038360a20200089<br>
[ 22936.298] (II) fglrx(0): Printing probed modes for output
DFP4<br>
[ 22936.298] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50
1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5
kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00
1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0
kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00
1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7
kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1400x1050"x60.0 162.00
1400 1664 1856 2160 1050 1201 1204 1250 +hsync +vsync (75.0
kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1600x900"x60.0 162.00
1600 1664 1856 2160 900 1201 1204 1250 +hsync +vsync (75.0 kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1360x1024"x60.0 162.00
1360 1664 1856 2160 1024 1201 1204 1250 +hsync +vsync (75.0
kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00
1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0
kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1440x900"x60.0 88.75
1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1280x960"x60.0 108.00
1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1280x800"x60.0 71.00
1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1280x768"x60.0 71.00
1280 1328 1360 1440 768 803 809 823 +hsync -vsync (49.3 kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1280x720"x60.0 71.00
1280 1328 1360 1440 720 803 809 823 +hsync -vsync (49.3 kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "1024x768"x60.0 65.00
1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800
840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800
824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)<br>
[ 22936.298] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640
656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)<br>
[ 22936.298] (II) fglrx(0): EDID for output CRT1<br>
[ 22936.298] (II) fglrx(0): EDID for output CRT2<br>
[ 22936.298] (II) fglrx(0): Output DFP1 disconnected<br>
[ 22936.298] (II) fglrx(0): Output DFP2 disconnected<br>
[ 22936.298] (II) fglrx(0): Output DFP3 disconnected<br>
[ 22936.298] (II) fglrx(0): Output DFP4 connected<br>
[ 22936.298] (II) fglrx(0): Output CRT1 disconnected<br>
[ 22936.298] (II) fglrx(0): Output CRT2 disconnected<br>
[ 22936.298] (II) fglrx(0): Using exact sizes for initial modes<br>
[ 22936.298] (II) fglrx(0): Output DFP4 using initial mode
1920x1080<br>
[ 22936.298] (II) fglrx(0): DPI set to (96, 96)<br>
[ 22936.298] (II) fglrx(0): Eyefinity capable adapter detected.<br>
[ 22936.298] (II) fglrx(0): Adapter ATI Radeon HD 5700 Series
has 3 configurable heads and 1 displays connected.<br>
[ 22936.298] (==) fglrx(0): PseudoColor visuals disabled<br>
[ 22936.298] (II) Loading sub module "ramdac"<br>
[ 22936.298] (II) LoadModule: "ramdac"<br>
[ 22936.298] (II) Module "ramdac" already built-in<br>
[ 22936.298] (==) fglrx(0): NoDRI = NO<br>
[ 22936.298] (==) fglrx(0): Capabilities: 0x00000000<br>
[ 22936.298] (==) fglrx(0): CapabilitiesEx: 0x00000000<br>
[ 22936.298] (==) fglrx(0): OpenGL ClientDriverName:
"fglrx_dri.so"<br>
[ 22936.298] (==) fglrx(0): UseFastTLS=0<br>
[ 22936.298] (==) fglrx(0): BlockSignalsOnLock=1<br>
[ 22936.298] (II) fglrx(0): Desktop Vsync is enabled.<br>
[ 22936.298] (--) Depth 24 pixmap format is 32 bpp<br>
[ 22936.298] (II) Loading extension ATIFGLRXDRI<br>
[ 22936.298] (II) fglrx(0): doing swlDriScreenInit<br>
[ 22936.298] (II) fglrx(0): swlDriScreenInit for fglrx driver<br>
[ 22936.298] ukiDynamicMajor: found major device number 251<br>
[ 22936.298] ukiDynamicMajor: found major device number 251<br>
[ 22936.298] ukiDynamicMajor: found major device number 251<br>
[ 22936.298] ukiOpenByBusid: Searching for BusID PCI:2:0:0<br>
[ 22936.298] ukiOpenDevice: node name is /dev/ati/card0<br>
[ 22936.298] ukiOpenDevice: open result is 16, (OK)<br>
[ 22936.298] ukiOpenByBusid: ukiOpenMinor returns 16<br>
[ 22936.298] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0<br>
[ 22936.298] (II) fglrx(0): [uki] DRM interface version 1.0<br>
[ 22936.298] (II) fglrx(0): [uki] created "fglrx" driver at
busid "PCI:2:0:0"<br>
[ 22936.298] (II) fglrx(0): [uki] added 8192 byte SAREA at
0x4c1e000<br>
[ 22936.298] (II) fglrx(0): [uki] mapped SAREA 0x4c1e000 to
0x7f604ff51000<br>
[ 22936.298] (II) fglrx(0): [uki] framebuffer handle = 0x4c1f000<br>
[ 22936.299] (II) fglrx(0): [uki] added 1 reserved context for
kernel<br>
[ 22936.299] (II) fglrx(0): swlDriScreenInit done<br>
[ 22936.299] (II) fglrx(0): Kernel Module Version Information:<br>
[ 22936.299] (II) fglrx(0): Name: fglrx<br>
[ 22936.299] (II) fglrx(0): Version: 8.87.5<br>
[ 22936.299] (II) fglrx(0): Date: Jul 7 2011<br>
[ 22936.299] (II) fglrx(0): Desc: ATI FireGL DRM kernel
module<br>
[ 22936.299] (II) fglrx(0): Kernel Module version matches
driver.<br>
[ 22936.299] (II) fglrx(0): Kernel Module Build Time
Information:<br>
[ 22936.299] (II) fglrx(0): Build-Kernel UTS_RELEASE:
3.0.0-1-amd64<br>
[ 22936.299] (II) fglrx(0): Build-Kernel MODVERSIONS:
no<br>
[ 22936.299] (II) fglrx(0): Build-Kernel __SMP__:
no<br>
[ 22936.299] (II) fglrx(0): Build-Kernel PAGE_SIZE:
0x1000<br>
[ 22936.299] (II) fglrx(0): [uki] register handle = 0x04c20000<br>
[ 22936.312] (II) fglrx(0): DRI initialization successfull<br>
[ 22936.312] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize:
0x010e0000<br>
[ 22936.313] (==) fglrx(0): Backing store disabled<br>
[ 22936.313] (II) Loading extension FGLRXEXTENSION<br>
[ 22936.313] (**) fglrx(0): DPMS enabled<br>
[ 22936.313] (II) fglrx(0): Initialized in-driver Xinerama
extension<br>
[ 22936.313] (**) fglrx(0): Textured Video is enabled.<br>
[ 22936.313] (II) LoadModule: "glesx"<br>
[ 22936.313] (II) Loading /usr/lib/xorg/modules/glesx.so<br>
[ 22936.314] (II) Module glesx: vendor="X.Org Foundation"<br>
[ 22936.314] compiled for 1.4.99.906, module version = 1.0.0<br>
[ 22936.314] (II) Loading extension GLESX<br>
[ 22936.314] (II) fglrx(0): GLESX enableFlags = 592<br>
[ 22936.314] (II) fglrx(0): GLESX is enabled<br>
[ 22936.314] (II) LoadModule: "amdxmm"<br>
[ 22936.314] (II) Loading /usr/lib/xorg/modules/amdxmm.so<br>
[ 22936.314] (II) Module amdxmm: vendor="X.Org Foundation"<br>
[ 22936.314] compiled for 1.4.99.906, module version = 2.0.0<br>
[ 22936.376] (II) Loading extension AMDXVOPL<br>
[ 22936.376] (II) Loading extension AMDXVBA<br>
[ 22936.376] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
<br>
[ 22936.378] (II) fglrx(0): Enable composite support
successfully<br>
[ 22936.378] (WW) fglrx(0): Option "VendorName" is not used<br>
[ 22936.378] (WW) fglrx(0): Option "ModelName" is not used<br>
[ 22936.378] (II) fglrx(0): X context handle = 0x1<br>
[ 22936.378] (II) fglrx(0): [DRI] installation complete<br>
[ 22936.378] (==) fglrx(0): Silken mouse enabled<br>
[ 22936.378] (==) fglrx(0): Using HW cursor of display
infrastructure!<br>
[ 22936.378] (II) fglrx(0): Disabling in-server RandR and
enabling in-driver RandR 1.2.<br>
[ 22936.440] (--) RandR disabled<br>
[ 22936.440] (II) Initializing built-in extension Generic Event
Extension<br>
[ 22936.440] (II) Initializing built-in extension SHAPE<br>
[ 22936.440] (II) Initializing built-in extension MIT-SHM<br>
[ 22936.440] (II) Initializing built-in extension
XInputExtension<br>
[ 22936.440] (II) Initializing built-in extension XTEST<br>
[ 22936.440] (II) Initializing built-in extension BIG-REQUESTS<br>
[ 22936.440] (II) Initializing built-in extension SYNC<br>
[ 22936.440] (II) Initializing built-in extension XKEYBOARD<br>
[ 22936.440] (II) Initializing built-in extension XC-MISC<br>
[ 22936.440] (II) Initializing built-in extension SECURITY<br>
[ 22936.440] (II) Initializing built-in extension XINERAMA<br>
[ 22936.440] (II) Initializing built-in extension XFIXES<br>
[ 22936.440] (II) Initializing built-in extension RENDER<br>
[ 22936.440] (II) Initializing built-in extension RANDR<br>
[ 22936.440] (II) Initializing built-in extension COMPOSITE<br>
[ 22936.440] (II) Initializing built-in extension DAMAGE<br>
[ 22936.440] (II) SELinux: Disabled on system<br>
[ 22936.442] ukiDynamicMajor: found major device number 251<br>
[ 22936.442] ukiDynamicMajor: found major device number 251<br>
[ 22936.442] ukiOpenByBusid: Searching for BusID PCI:2:0:0<br>
[ 22936.442] ukiOpenDevice: node name is /dev/ati/card0<br>
[ 22936.442] ukiOpenDevice: open result is 17, (OK)<br>
[ 22936.442] ukiOpenByBusid: ukiOpenMinor returns 17<br>
[ 22936.442] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0<br>
[ 22936.518] (II) AIGLX: Loaded and initialized OpenGL
driver(II) GLX: Initialized DRI GL provider for screen 0<br>
[ 22936.529] (II) fglrx(0): Enable the clock gating!<br>
[ 22936.540] (II) fglrx(0): Desktop Vsync is enabled.<br>
[ 22936.540] (II) fglrx(0): Setting screen physical size to 508
x 285<br>
[ 22936.583] (II) config/udev: Adding input device Power Button
(/dev/input/event5)<br>
[ 22936.583] (**) Power Button: Applying InputClass "evdev
keyboard catchall"<br>
[ 22936.583] (II) LoadModule: "evdev"<br>
[ 22936.583] (II) Loading
/usr/lib/xorg/modules/input/evdev_drv.so<br>
[ 22936.583] (II) Module evdev: vendor="X.Org Foundation"<br>
[ 22936.583] compiled for 1.10.1, module version = 2.6.0<br>
[ 22936.583] Module class: X.Org XInput Driver<br>
[ 22936.583] ABI class: X.Org XInput driver, version 12.2<br>
[ 22936.583] (II) Using input driver 'evdev' for 'Power Button'<br>
[ 22936.583] (II) Loading
/usr/lib/xorg/modules/input/evdev_drv.so<br>
[ 22936.583] (**) Power Button: always reports core events<br>
[ 22936.583] (**) Power Button: Device: "/dev/input/event5"<br>
[ 22936.583] (--) Power Button: Found keys<br>
[ 22936.583] (II) Power Button: Configuring as keyboard<br>
[ 22936.583] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"<br>
[ 22936.583] (II) XINPUT: Adding extended input device "Power
Button" (type: KEYBOARD)<br>
[ 22936.583] (**) Option "xkb_rules" "evdev"<br>
[ 22936.583] (**) Option "xkb_model" "pc105"<br>
[ 22936.583] (**) Option "xkb_layout" "fr"<br>
[ 22936.583] (**) Option "xkb_variant" "latin9"<br>
[ 22936.608] (II) config/udev: Adding input device Power Button
(/dev/input/event4)<br>
[ 22936.608] (**) Power Button: Applying InputClass "evdev
keyboard catchall"<br>
[ 22936.608] (II) Using input driver 'evdev' for 'Power Button'<br>
[ 22936.608] (II) Loading
/usr/lib/xorg/modules/input/evdev_drv.so<br>
[ 22936.608] (**) Power Button: always reports core events<br>
[ 22936.608] (**) Power Button: Device: "/dev/input/event4"<br>
[ 22936.608] (--) Power Button: Found keys<br>
[ 22936.608] (II) Power Button: Configuring as keyboard<br>
[ 22936.608] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"<br>
[ 22936.608] (II) XINPUT: Adding extended input device "Power
Button" (type: KEYBOARD)<br>
[ 22936.608] (**) Option "xkb_rules" "evdev"<br>
[ 22936.608] (**) Option "xkb_model" "pc105"<br>
[ 22936.608] (**) Option "xkb_layout" "fr"<br>
[ 22936.608] (**) Option "xkb_variant" "latin9"<br>
[ 22936.611] (II) config/udev: Adding input device G15 Gaming
Keyboard (/dev/input/event0)<br>
[ 22936.611] (**) G15 Gaming Keyboard: Applying InputClass
"evdev keyboard catchall"<br>
[ 22936.611] (II) Using input driver 'evdev' for 'G15 Gaming
Keyboard'<br>
[ 22936.611] (II) Loading
/usr/lib/xorg/modules/input/evdev_drv.so<br>
[ 22936.611] (**) G15 Gaming Keyboard: always reports core
events<br>
[ 22936.611] (**) G15 Gaming Keyboard: Device:
"/dev/input/event0"<br>
[ 22936.611] (--) G15 Gaming Keyboard: Found keys<br>
[ 22936.611] (II) G15 Gaming Keyboard: Configuring as keyboard<br>
[ 22936.611] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input0/event0"<br>
[ 22936.611] (II) XINPUT: Adding extended input device "G15
Gaming Keyboard" (type: KEYBOARD)<br>
[ 22936.611] (**) Option "xkb_rules" "evdev"<br>
[ 22936.611] (**) Option "xkb_model" "pc105"<br>
[ 22936.611] (**) Option "xkb_layout" "fr"<br>
[ 22936.611] (**) Option "xkb_variant" "latin9"<br>
[ 22936.611] (II) config/udev: Adding input device G15 Gaming
Keyboard (/dev/input/event1)<br>
[ 22936.611] (**) G15 Gaming Keyboard: Applying InputClass
"evdev keyboard catchall"<br>
[ 22936.611] (II) Using input driver 'evdev' for 'G15 Gaming
Keyboard'<br>
[ 22936.611] (II) Loading
/usr/lib/xorg/modules/input/evdev_drv.so<br>
[ 22936.611] (**) G15 Gaming Keyboard: always reports core
events<br>
[ 22936.611] (**) G15 Gaming Keyboard: Device:
"/dev/input/event1"<br>
[ 22936.611] (--) G15 Gaming Keyboard: Found keys<br>
[ 22936.611] (II) G15 Gaming Keyboard: Configuring as keyboard<br>
[ 22936.611] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input1/event1"<br>
[ 22936.611] (II) XINPUT: Adding extended input device "G15
Gaming Keyboard" (type: KEYBOARD)<br>
[ 22936.611] (**) Option "xkb_rules" "evdev"<br>
[ 22936.611] (**) Option "xkb_model" "pc105"<br>
[ 22936.611] (**) Option "xkb_layout" "fr"<br>
[ 22936.611] (**) Option "xkb_variant" "latin9"<br>
[ 22936.612] (II) config/udev: Adding input device Wacom Bamboo
Pen Pen (/dev/input/event6)<br>
[ 22936.612] (**) Wacom Bamboo Pen Pen: Applying InputClass
"evdev tablet catchall"<br>
[ 22936.612] (**) Wacom Bamboo Pen Pen: Applying InputClass
"Wacom class"<br>
[ 22936.612] (II) LoadModule: "wacom"<br>
[ 22936.612] (II) Loading
/usr/lib/xorg/modules/input/wacom_drv.so<br>
[ 22936.612] (II) Module wacom: vendor="X.Org Foundation"<br>
[ 22936.612] compiled for 1.10.1, module version = 0.10.10<br>
[ 22936.612] Module class: X.Org XInput Driver<br>
[ 22936.612] ABI class: X.Org XInput driver, version 12.2<br>
[ 22936.612] (II) Using input driver 'wacom' for 'Wacom Bamboo
Pen Pen'<br>
[ 22936.612] (II) Loading
/usr/lib/xorg/modules/input/wacom_drv.so<br>
[ 22936.612] (**) Wacom Bamboo Pen Pen: always reports core
events<br>
[ 22936.612] (**) Option "Device" "/dev/input/event6"<br>
[ 22936.612] (II) Wacom Bamboo Pen Pen: type not specified,
assuming 'stylus'.<br>
[ 22936.612] (II) Wacom Bamboo Pen Pen: other types will be
automatically added.<br>
[ 22936.612] (--) Wacom Bamboo Pen Pen stylus: using pressure
threshold of 27 for button 1<br>
[ 22936.612] (--) Wacom Bamboo Pen Pen stylus: Wacom USB Bamboo
tablet maxX=14720 maxY=9200 maxZ=255 resX=100000 resY=100000
tilt=disabled<br>
[ 22936.612] (II) Wacom Bamboo Pen Pen stylus: hotplugging
dependent devices.<br>
[ 22936.612] (**) Wacom Bamboo Pen Pen eraser: Applying
InputClass "evdev tablet catchall"<br>
[ 22936.612] (**) Wacom Bamboo Pen Pen eraser: Applying
InputClass "Wacom class"<br>
[ 22936.612] (II) Using input driver 'wacom' for 'Wacom Bamboo
Pen Pen eraser'<br>
[ 22936.612] (II) Loading
/usr/lib/xorg/modules/input/wacom_drv.so<br>
[ 22936.612] (**) Wacom Bamboo Pen Pen eraser: always reports
core events<br>
[ 22936.612] (**) Option "Device" "/dev/input/event6"<br>
[ 22936.612] (--) Wacom Bamboo Pen Pen eraser: Wacom USB Bamboo
tablet maxX=14720 maxY=9200 maxZ=255 resX=100000 resY=100000
tilt=disabled<br>
[ 22936.700] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input6/event6"<br>
[ 22936.700] (II) XINPUT: Adding extended input device "Wacom
Bamboo Pen Pen eraser" (type: ERASER)<br>
[ 22936.700] (--) Wacom Bamboo Pen Pen eraser: top X=0 top Y=0
bottom X=14720 bottom Y=9200 resol X=100000 resol Y=100000<br>
[ 22936.700] (**) Wacom Bamboo Pen Pen eraser: (accel) keeping
acceleration scheme 1<br>
[ 22936.700] (**) Wacom Bamboo Pen Pen eraser: (accel)
acceleration profile 0<br>
[ 22936.700] (**) Wacom Bamboo Pen Pen eraser: (accel)
acceleration factor: 2.000<br>
[ 22936.700] (**) Wacom Bamboo Pen Pen eraser: (accel)
acceleration threshold: 4<br>
[ 22936.700] (II) Wacom Bamboo Pen Pen stylus: hotplugging
completed.<br>
[ 22936.728] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input6/event6"<br>
[ 22936.728] (II) XINPUT: Adding extended input device "Wacom
Bamboo Pen Pen stylus" (type: STYLUS)<br>
[ 22936.728] (--) Wacom Bamboo Pen Pen stylus: top X=0 top Y=0
bottom X=14720 bottom Y=9200 resol X=100000 resol Y=100000<br>
[ 22936.728] (**) Wacom Bamboo Pen Pen stylus: (accel) keeping
acceleration scheme 1<br>
[ 22936.728] (**) Wacom Bamboo Pen Pen stylus: (accel)
acceleration profile 0<br>
[ 22936.728] (**) Wacom Bamboo Pen Pen stylus: (accel)
acceleration factor: 2.000<br>
[ 22936.728] (**) Wacom Bamboo Pen Pen stylus: (accel)
acceleration threshold: 4<br>
[ 22936.728] (II) config/udev: Adding input device Wacom Bamboo
Pen Pen (/dev/input/mouse1)<br>
[ 22936.728] (II) No input driver/identifier specified
(ignoring)<br>
[ 22936.728] (II) config/udev: Adding input device Wacom Bamboo
Pen Finger (/dev/input/event7)<br>
[ 22936.728] (**) Wacom Bamboo Pen Finger: Applying InputClass
"evdev touchpad catchall"<br>
[ 22936.728] (**) Wacom Bamboo Pen Finger: Applying InputClass
"touchpad catchall"<br>
[ 22936.728] (**) Wacom Bamboo Pen Finger: Applying InputClass
"Wacom class"<br>
[ 22936.728] (II) Using input driver 'wacom' for 'Wacom Bamboo
Pen Finger'<br>
[ 22936.728] (II) Loading
/usr/lib/xorg/modules/input/wacom_drv.so<br>
[ 22936.728] (**) Wacom Bamboo Pen Finger: always reports core
events<br>
[ 22936.728] (**) Option "Device" "/dev/input/event7"<br>
[ 22936.729] (II) Wacom Bamboo Pen Finger: type not specified,
assuming 'touch'.<br>
[ 22936.729] (II) Wacom Bamboo Pen Finger: other types will be
automatically added.<br>
[ 22936.729] (--) Wacom Bamboo Pen Finger touch: using pressure
threshold of 27 for button 1<br>
[ 22936.729] (--) Wacom Bamboo Pen Finger touch: Wacom USB
Bamboo tablet maxX=15360 maxY=10240 resX=-2147483648
resY=-2147483648 <br>
[ 22936.729] (II) Wacom Bamboo Pen Finger touch: hotplugging
dependent devices.<br>
[ 22936.729] (**) Wacom Bamboo Pen Finger pad: Applying
InputClass "evdev touchpad catchall"<br>
[ 22936.729] (**) Wacom Bamboo Pen Finger pad: Applying
InputClass "touchpad catchall"<br>
[ 22936.729] (**) Wacom Bamboo Pen Finger pad: Applying
InputClass "Wacom class"<br>
[ 22936.729] (II) Using input driver 'wacom' for 'Wacom Bamboo
Pen Finger pad'<br>
[ 22936.729] (II) Loading
/usr/lib/xorg/modules/input/wacom_drv.so<br>
[ 22936.729] (**) Wacom Bamboo Pen Finger pad: always reports
core events<br>
[ 22936.729] (**) Option "Device" "/dev/input/event7"<br>
[ 22936.729] (--) Wacom Bamboo Pen Finger pad: Wacom USB Bamboo
tablet maxX=15360 maxY=10240 resX=-2147483648 resY=-2147483648 <br>
[ 22936.748] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.2/3-1.2:1.1/input/input7/event7"<br>
[ 22936.748] (II) XINPUT: Adding extended input device "Wacom
Bamboo Pen Finger pad" (type: PAD)<br>
[ 22936.748] (**) Wacom Bamboo Pen Finger pad: (accel) keeping
acceleration scheme 1<br>
[ 22936.748] (**) Wacom Bamboo Pen Finger pad: (accel)
acceleration profile 0<br>
[ 22936.748] (**) Wacom Bamboo Pen Finger pad: (accel)
acceleration factor: 2.000<br>
[ 22936.748] (**) Wacom Bamboo Pen Finger pad: (accel)
acceleration threshold: 4<br>
[ 22936.748] (II) Wacom Bamboo Pen Finger touch: hotplugging
completed.<br>
[ 22936.764] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.2/3-1.2:1.1/input/input7/event7"<br>
[ 22936.764] (II) XINPUT: Adding extended input device "Wacom
Bamboo Pen Finger touch" (type: TOUCH)<br>
[ 22936.764] (--) Wacom Bamboo Pen Finger touch: top X=0 top Y=0
bottom X=15360 bottom Y=10240 resol X=-2147483648 resol
Y=-2147483648<br>
[ 22936.764] (**) Wacom Bamboo Pen Finger touch: (accel) keeping
acceleration scheme 1<br>
[ 22936.764] (**) Wacom Bamboo Pen Finger touch: (accel)
acceleration profile 0<br>
[ 22936.764] (**) Wacom Bamboo Pen Finger touch: (accel)
acceleration factor: 2.000<br>
[ 22936.764] (**) Wacom Bamboo Pen Finger touch: (accel)
acceleration threshold: 4<br>
[ 22936.764] (II) config/udev: Adding input device Wacom Bamboo
Pen Finger (/dev/input/mouse2)<br>
[ 22936.764] (**) Wacom Bamboo Pen Finger: Applying InputClass
"touchpad catchall"<br>
[ 22936.764] (II) LoadModule: "synaptics"<br>
[ 22936.764] (II) Loading
/usr/lib/xorg/modules/input/synaptics_drv.so<br>
[ 22936.764] (II) Module synaptics: vendor="X.Org Foundation"<br>
[ 22936.764] compiled for 1.10.2, module version = 1.4.1<br>
[ 22936.764] Module class: X.Org XInput Driver<br>
[ 22936.764] ABI class: X.Org XInput driver, version 12.2<br>
[ 22936.764] (II) Using input driver 'synaptics' for 'Wacom
Bamboo Pen Finger'<br>
[ 22936.764] (II) Loading
/usr/lib/xorg/modules/input/synaptics_drv.so<br>
[ 22936.764] (**) Wacom Bamboo Pen Finger: always reports core
events<br>
[ 22936.764] (**) Option "Device" "/dev/input/mouse2"<br>
[ 22936.764] (--) Wacom Bamboo Pen Finger: invalid x-axis
range. defaulting to 1615 - 5685<br>
[ 22936.764] (--) Wacom Bamboo Pen Finger: invalid y-axis
range. defaulting to 1729 - 4171<br>
[ 22936.764] (--) Wacom Bamboo Pen Finger: invalid pressure
range. defaulting to 0 - 256<br>
[ 22936.764] (--) Wacom Bamboo Pen Finger: invalid finger width
range. defaulting to 0 - 16<br>
[ 22936.784] (EE) Query no Synaptics: 6003C8<br>
[ 22936.784] (--) Wacom Bamboo Pen Finger: no supported touchpad
found<br>
[ 22936.784] (EE) Wacom Bamboo Pen Finger Unable to
query/initialize Synaptics hardware.<br>
[ 22936.800] (EE) PreInit returned 11 for "Wacom Bamboo Pen
Finger"<br>
[ 22936.800] (II) UnloadModule: "synaptics"<br>
[ 22936.800] (II) Unloading synaptics<br>
[ 22936.800] (II) config/udev: Adding input device Logitech USB
Gaming Mouse (/dev/input/event2)<br>
[ 22936.800] (**) Logitech USB Gaming Mouse: Applying InputClass
"evdev pointer catchall"<br>
[ 22936.800] (II) Using input driver 'evdev' for 'Logitech USB
Gaming Mouse'<br>
[ 22936.800] (II) Loading
/usr/lib/xorg/modules/input/evdev_drv.so<br>
[ 22936.800] (**) Logitech USB Gaming Mouse: always reports core
events<br>
[ 22936.800] (**) Logitech USB Gaming Mouse: Device:
"/dev/input/event2"<br>
[ 22936.800] (--) Logitech USB Gaming Mouse: Found 20 mouse
buttons<br>
[ 22936.800] (--) Logitech USB Gaming Mouse: Found scroll
wheel(s)<br>
[ 22936.800] (--) Logitech USB Gaming Mouse: Found relative axes<br>
[ 22936.800] (--) Logitech USB Gaming Mouse: Found x and y
relative axes<br>
[ 22936.800] (II) Logitech USB Gaming Mouse: Configuring as
mouse<br>
[ 22936.800] (II) Logitech USB Gaming Mouse: Adding scrollwheel
support<br>
[ 22936.800] (**) Logitech USB Gaming Mouse: YAxisMapping:
buttons 4 and 5<br>
[ 22936.800] (**) Logitech USB Gaming Mouse: EmulateWheelButton:
4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200<br>
[ 22936.800] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input2/event2"<br>
[ 22936.800] (II) XINPUT: Adding extended input device "Logitech
USB Gaming Mouse" (type: MOUSE)<br>
[ 22936.800] (II) Logitech USB Gaming Mouse: initialized for
relative axes.<br>
[ 22936.800] (**) Logitech USB Gaming Mouse: (accel) keeping
acceleration scheme 1<br>
[ 22936.800] (**) Logitech USB Gaming Mouse: (accel)
acceleration profile 0<br>
[ 22936.800] (**) Logitech USB Gaming Mouse: (accel)
acceleration factor: 2.000<br>
[ 22936.800] (**) Logitech USB Gaming Mouse: (accel)
acceleration threshold: 4<br>
[ 22936.801] (II) config/udev: Adding input device Logitech USB
Gaming Mouse (/dev/input/mouse0)<br>
[ 22936.801] (II) No input driver/identifier specified
(ignoring)<br>
[ 22936.802] (II) config/udev: Adding input device zc3xx
(/dev/input/event9)<br>
[ 22936.802] (**) zc3xx: Applying InputClass "evdev keyboard
catchall"<br>
[ 22936.802] (II) Using input driver 'evdev' for 'zc3xx'<br>
[ 22936.802] (II) Loading
/usr/lib/xorg/modules/input/evdev_drv.so<br>
[ 22936.802] (**) zc3xx: always reports core events<br>
[ 22936.802] (**) zc3xx: Device: "/dev/input/event9"<br>
[ 22936.802] (--) zc3xx: Found keys<br>
[ 22936.802] (II) zc3xx: Configuring as keyboard<br>
[ 22936.802] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-1/input/input9/event9"<br>
[ 22936.802] (II) XINPUT: Adding extended input device "zc3xx"
(type: KEYBOARD)<br>
[ 22936.802] (**) Option "xkb_rules" "evdev"<br>
[ 22936.802] (**) Option "xkb_model" "pc105"<br>
[ 22936.802] (**) Option "xkb_layout" "fr"<br>
[ 22936.802] (**) Option "xkb_variant" "latin9"<br>
[ 22936.804] (II) config/udev: Adding input device HD-Audio
Generic HDMI/DP (/dev/input/event8)<br>
[ 22936.804] (II) No input driver/identifier specified
(ignoring)<br>
[ 22936.806] (II) config/udev: Adding input device G15 Extra
Keys (/dev/input/event3)<br>
[ 22936.806] (**) G15 Extra Keys: Applying InputClass "evdev
keyboard catchall"<br>
[ 22936.806] (II) Using input driver 'evdev' for 'G15 Extra
Keys'<br>
[ 22936.806] (II) Loading
/usr/lib/xorg/modules/input/evdev_drv.so<br>
[ 22936.806] (**) G15 Extra Keys: always reports core events<br>
[ 22936.806] (**) G15 Extra Keys: Device: "/dev/input/event3"<br>
[ 22936.806] (--) G15 Extra Keys: Found keys<br>
[ 22936.806] (II) G15 Extra Keys: Configuring as keyboard<br>
[ 22936.806] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input10/event3"<br>
[ 22936.806] (II) XINPUT: Adding extended input device "G15
Extra Keys" (type: KEYBOARD)<br>
[ 22936.806] (**) Option "xkb_rules" "evdev"<br>
[ 22936.806] (**) Option "xkb_model" "pc105"<br>
[ 22936.806] (**) Option "xkb_layout" "fr"<br>
[ 22936.806] (**) Option "xkb_variant" "latin9"<br>
[ 22936.810] (II) fglrx(0): Restoring Recent Mode via PCS is not
supported in RANDR 1.2 capable environments<br>
[ 22936.877] (II) fglrx(0): EDID vendor "SAM", prod id 1531<br>
[ 22936.877] (II) fglrx(0): Using EDID range info for horizontal
sync<br>
[ 22936.877] (II) fglrx(0): Using EDID range info for vertical
refresh<br>
[ 22936.877] (II) fglrx(0): Printing DDC gathered Modelines:<br>
[ 22936.877] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50
1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5
kHz)<br>
[ 22936.877] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800
840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)<br>
[ 22936.877] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800
824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)<br>
[ 22936.877] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640
656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)<br>
[ 22936.877] (II) fglrx(0): Modeline "1024x768"x0.0 65.00
1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)<br>
[ 22936.877] (II) fglrx(0): Modeline "1280x800"x0.0 71.00
1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)<br>
[ 22936.877] (II) fglrx(0): Modeline "1280x960"x0.0 108.00
1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)<br>
[ 22936.877] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00
1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0
kHz)<br>
[ 22936.877] (II) fglrx(0): Modeline "1440x900"x0.0 88.75
1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)<br>
[ 22936.878] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00
1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0
kHz)<br>
[ 22936.878] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00
1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7
kHz)<br>
[ 22936.893] (II) fglrx(0): EDID vendor "SAM", prod id 1531<br>
[ 22936.893] (II) fglrx(0): Using hsync ranges from config file<br>
[ 22936.893] (II) fglrx(0): Using vrefresh ranges from config
file<br>
[ 22936.893] (II) fglrx(0): Printing DDC gathered Modelines:<br>
[ 22936.893] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50
1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5
kHz)<br>
[ 22936.893] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800
840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)<br>
[ 22936.893] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800
824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)<br>
[ 22936.893] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640
656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)<br>
[ 22936.893] (II) fglrx(0): Modeline "1024x768"x0.0 65.00
1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)<br>
[ 22936.893] (II) fglrx(0): Modeline "1280x800"x0.0 71.00
1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)<br>
[ 22936.893] (II) fglrx(0): Modeline "1280x960"x0.0 108.00
1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)<br>
[ 22936.893] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00
1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0
kHz)<br>
[ 22936.893] (II) fglrx(0): Modeline "1440x900"x0.0 88.75
1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)<br>
[ 22936.893] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00
1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0
kHz)<br>
[ 22936.893] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00
1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7
kHz)<br>
[ 22936.986] (II) fglrx(0): EDID vendor "SAM", prod id 1531<br>
[ 22936.986] (II) fglrx(0): Using hsync ranges from config file<br>
[ 22936.986] (II) fglrx(0): Using vrefresh ranges from config
file<br>
[ 22936.986] (II) fglrx(0): Printing DDC gathered Modelines:<br>
[ 22936.986] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50
1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5
kHz)<br>
[ 22936.986] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800
840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)<br>
[ 22936.986] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800
824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)<br>
[ 22936.986] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640
656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)<br>
[ 22936.986] (II) fglrx(0): Modeline "1024x768"x0.0 65.00
1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)<br>
[ 22936.986] (II) fglrx(0): Modeline "1280x800"x0.0 71.00
1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)<br>
[ 22936.986] (II) fglrx(0): Modeline "1280x960"x0.0 108.00
1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)<br>
[ 22936.986] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00
1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0
kHz)<br>
[ 22936.986] (II) fglrx(0): Modeline "1440x900"x0.0 88.75
1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)<br>
[ 22936.986] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00
1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0
kHz)<br>
[ 22936.986] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00
1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7
kHz)<br>
<br>
<br>
-- System Information:<br>
Debian Release: wheezy/sid<br>
APT prefers unstable<br>
APT policy: (500, 'unstable')<br>
Architecture: amd64 (x86_64)<br>
<br>
Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores)<br>
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)<br>
Shell: /bin/sh linked to /bin/dash<br>
<br>
Versions of packages fglrx-driver depends on:<br>
ii glx-alternative-fglrx 0.1.91 allows the
selection of FGLRX as G<br>
ii libc6 2.13-16 Embedded GNU C
Library: Shared lib<br>
ii libgcc1 1:4.6.1-6 GCC support library<br>
ii libgl1-mesa-glx [libgl1] 7.10.3-4 free implementation
of the OpenGL <br>
ii libstdc++6 4.6.1-6 GNU Standard C++
Library v3<br>
ii libx11-6 2:1.4.4-1 X11 client-side
library<br>
ii libxext6 2:1.3.0-3 X11 miscellaneous
extension librar<br>
ii libxinerama1 2:1.1.1-3 X11 Xinerama
extension library<br>
ii libxrandr2 2:1.3.2-2 X11 RandR extension
library<br>
ii libxrender1 1:0.9.6-2 X Rendering
Extension client libra<br>
ii xserver-xorg-core [xorg-video 2:1.10.3-1 Xorg X server -
core server<br>
<br>
Versions of packages fglrx-driver recommends:<br>
ii fglrx-atieventsd 1:11-7-4 external events
daemon for the non<br>
ii fglrx-glx 1:11-7-4 proprietary libGL
for the non-free<br>
ii fglrx-glx-ia32 1:11-7-4 proprietary libGL
for the non-free<br>
ii fglrx-modules-dkms 1:11-7-4 dkms module source
for the non-fre<br>
<br>
Versions of packages fglrx-driver suggests:<br>
ii fglrx-control 1:11-7-4 control panel for
the non-free ATI<br>
ii xvba-va-driver 0.8.0-1 XvBA-based backend
for VA API (AMD<br>
<br>
-- no debconf information</small></i>
</body>
</html>