Bug#868499: osmose-emulator: No sound

[Carlos Donizete Froes]

Hi Gianfranco,

> what is then your opinion on this bug?
> can't we just apply the now upstream-proposed patch and upload?
> https://github.com/lutris/osmose/pull/18

I do not think it's a solution replacing 'plughw: 0,0' with 'default'. In my
case, I own an HP model notebook.

===== Terminal =====

$ lspci |grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High
Definition Audio (rev 05)

$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version k4.19.0-1-amd64.

$ cat /proc/asound/cards
 0 [MID            ]: HDA-Intel - HDA Intel MID
                      HDA Intel MID at 0xd4400000 irq 28

$ cat /proc/asound/devices
  2: [ 0- 0]: digital audio playback
  3: [ 0- 0]: digital audio capture
  4: [ 0- 3]: digital audio playback
  5: [ 0- 0]: hardware dependent
  6: [ 0- 3]: hardware dependent
  7: [ 0]   : control
 33:        : timer

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: ALC270 Analog [ALC270 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

===== End =====

Leaving as 'plughw' the sound of the emulator works normally, but if I leave it
as 'default', the sound stops working so I would have to do a manual setup by
adding 'options snd-hda-intel'.

Would not it be nice to have a solution for all sound models to work instead of
switching from six to half a dozen?

Thanks!

-- 
⢀⣴⠾⠻⢶⣦⠀ Carlos Donizete Froes [a.k.a coringao]
⣾⠁⢠⠒⠀⣿⡁ - https://wiki.debian.org/coringao
⢿⡄⠘⠷⠚⠋⠀ GPG: 4096R/B638B780
⠈⠳⣄⠀⠀⠀   2157 630B D441 A775 BEFF  D35F FA63 ADA6 B638 B780
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part
URL: <http://alioth-lists.debian.net/pipermail/pkg-games-devel/attachments/20181228/a938116c/attachment.sig>