Bug#671454: gnome-panel: segfaults at start

Paul Dreik slask at pauldreik.se
Fri May 4 08:07:52 UTC 2012


Package: gnome-panel
Version: 3.2.1-2+b1
Severity: important

Dear Maintainer,
   * What led up to the situation?
	normal boot, logging in at gdm with "gnome" selected.
   * What exactly did you do (or not do) that was effective (or
     ineffective)?
   * What was the outcome of this action?
	the panel flashes by and then vanishes. system shows the bluish
        space theme desktop background, but no buttons or anything visible.
        cursor moves with mouse, but nothing happens when clicking or
        scrolling. Changing between virtual terminals works ok.
	Last line in dmesg output says gnome-panel segfaulted.
	ctrl-alt-del allows me to log out.        
   * What outcome did you expect instead?
     The gnome desktop to show up, as it usually does :-)


*** /var/tmp/dmesg.txt
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.15-1) (debian-kernel at lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Sun Apr 15 16:47:38 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=/dev/mapper/sda2_crypt ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
[    0.000000]  BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS3/P35-DS3, BIOS F4 06/29/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   2 base 0BFF00000 mask FFFF00000 write-through
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000f5570] f5570
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000
[    0.000000]  0000000000 - 00bfe00000 page 2M
[    0.000000]  00bfe00000 - 00bfee0000 page 4k
[    0.000000] kernel direct mapping tables up to bfee0000 @ 1fffb000-20000000
[    0.000000] RAMDISK: 36990000 - 374c0000
[    0.000000] ACPI: RSDP 00000000000f6f10 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000bfee3040 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000bfee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000bfee3180 04A88 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 00000000bfee0000 00040
[    0.000000] ACPI: HPET 00000000bfee7d80 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000bfee7e00 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 00000000bfee7c80 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 00000000bfee7e80 0015C (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.000000] ACPI: SSDT 00000000bfee8430 00275 (v01  PmRef    CpuPm 00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000000bfee0000
[    0.000000] Initmem setup node 0 0000000000000000-00000000bfee0000
[    0.000000]   NODE_DATA [00000000bfedb000 - 00000000bfedffff]
[    0.000000]  [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000bfee0
[    0.000000] On node 0 totalpages: 786030
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10693 pages used for memmap
[    0.000000]   DMA32 zone: 771355 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bfc00000 s82304 r8192 d24192 u524288
[    0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 775276
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=/dev/mapper/sda2_crypt ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3080688k/3144576k available (3402k kernel code, 456k absent, 63432k reserved, 3330k data, 568k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2399.662 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.32 BogoMIPS (lpj=9598648)
[    0.004008] pid_max: default: 32768 minimum: 301
[    0.004051] Security Framework initialized
[    0.004057] AppArmor: AppArmor disabled by boot time parameter
[    0.004400] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009662] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.011186] Mount-cache hash table entries: 256
[    0.011332] Initializing cgroup subsys cpuacct
[    0.011338] Initializing cgroup subsys memory
[    0.011350] Initializing cgroup subsys devices
[    0.011354] Initializing cgroup subsys freezer
[    0.011356] Initializing cgroup subsys net_cls
[    0.011358] Initializing cgroup subsys blkio
[    0.011366] Initializing cgroup subsys perf_event
[    0.011397] CPU: Physical Processor ID: 0
[    0.011399] CPU: Processor Core ID: 0
[    0.011401] mce: CPU supports 6 MCE banks
[    0.011409] CPU0: Thermal monitoring enabled (TM2)
[    0.011413] using mwait in idle threads.
[    0.011823] ACPI: Core revision 20110623
[    0.016428] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056167] CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.060003] PEBS disabled due to CPU errata.
[    0.060003] ... version:                2
[    0.060003] ... bit width:              40
[    0.060003] ... generic registers:      2
[    0.060003] ... value mask:             000000ffffffffff
[    0.060003] ... max period:             000000007fffffff
[    0.060003] ... fixed-purpose events:   3
[    0.060003] ... event mask:             0000000700000003
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1
[    0.060003] smpboot cpu 1: start_ip = 99000
[    0.148038] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148176]  #2
[    0.148178] smpboot cpu 2: start_ip = 99000
[    0.240032] NMI watchdog enabled, takes one hw-pmu counter.
[    0.240146]  #3 Ok.
[    0.240148] smpboot cpu 3: start_ip = 99000
[    0.332037] NMI watchdog enabled, takes one hw-pmu counter.
[    0.332062] Brought up 4 CPUs
[    0.332065] Total of 4 processors activated (19199.17 BogoMIPS).
[    0.335440] devtmpfs: initialized
[    0.338767] PM: Registering ACPI NVS region at bfee0000 (12288 bytes)
[    0.338767] print_constraints: dummy: 
[    0.338767] NET: Registered protocol family 16
[    0.338767] ACPI: bus type pci registered
[    0.338767] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.338767] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.343448] PCI: Using configuration type 1 for base access
[    0.343546] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.343548] mtrr: probably your BIOS does not setup all CPUs.
[    0.343549] mtrr: corrected configuration.
[    0.344149] bio: create slab <bio-0> at 0
[    0.344237] ACPI: Added _OSI(Module Device)
[    0.344237] ACPI: Added _OSI(Processor Device)
[    0.344237] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.344237] ACPI: Added _OSI(Processor Aggregator Device)
[    0.344785] ACPI: EC: Look up EC in DSDT
[    0.349255] ACPI: SSDT 00000000bfee8280 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.349413] ACPI: Dynamic OEM Table Load:
[    0.349416] ACPI: SSDT           (null) 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.349549] ACPI: SSDT 00000000bfee8310 00087 (v01  PmRef  Cpu2Ist 00003000 INTL 20040311)
[    0.349704] ACPI: Dynamic OEM Table Load:
[    0.349706] ACPI: SSDT           (null) 00087 (v01  PmRef  Cpu2Ist 00003000 INTL 20040311)
[    0.349839] ACPI: SSDT 00000000bfee83a0 00087 (v01  PmRef  Cpu3Ist 00003000 INTL 20040311)
[    0.349993] ACPI: Dynamic OEM Table Load:
[    0.349996] ACPI: SSDT           (null) 00087 (v01  PmRef  Cpu3Ist 00003000 INTL 20040311)
[    0.350147] ACPI: Interpreter enabled
[    0.350153] ACPI: (supports S0 S3 S4 S5)
[    0.350173] ACPI: Using IOAPIC for interrupt routing
[    0.354971] ACPI: No dock devices found.
[    0.354974] HEST: Table not found.
[    0.354978] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.355035] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.355162] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.355165] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.355168] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.355171] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.355173] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xfebfffff] (ignored)
[    0.355183] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[    0.355223] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[    0.355259] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.355262] pci 0000:00:01.0: PME# disabled
[    0.355297] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.355336] pci 0000:00:1a.0: reg 20: [io  0xe000-0xe01f]
[    0.355383] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.355421] pci 0000:00:1a.1: reg 20: [io  0xe100-0xe11f]
[    0.355468] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[    0.355506] pci 0000:00:1a.2: reg 20: [io  0xe200-0xe21f]
[    0.355557] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.355572] pci 0000:00:1a.7: reg 10: [mem 0xfa100000-0xfa1003ff]
[    0.355652] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.355714] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.355717] pci 0000:00:1c.0: PME# disabled
[    0.355737] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[    0.355799] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.355802] pci 0000:00:1c.1: PME# disabled
[    0.355823] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[    0.355884] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.355888] pci 0000:00:1c.3: PME# disabled
[    0.355907] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[    0.355969] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.355972] pci 0000:00:1c.4: PME# disabled
[    0.355995] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.356048] pci 0000:00:1d.0: reg 20: [io  0xe300-0xe31f]
[    0.356095] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.356134] pci 0000:00:1d.1: reg 20: [io  0xe400-0xe41f]
[    0.356181] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.356219] pci 0000:00:1d.2: reg 20: [io  0xe500-0xe51f]
[    0.356270] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.356285] pci 0000:00:1d.7: reg 10: [mem 0xfa101000-0xfa1013ff]
[    0.356375] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.356441] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
[    0.356516] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.356519] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.356565] pci 0000:00:1f.2: [8086:2923] type 0 class 0x000106
[    0.356582] pci 0000:00:1f.2: reg 10: [io  0xe600-0xe607]
[    0.356590] pci 0000:00:1f.2: reg 14: [io  0xe700-0xe703]
[    0.356597] pci 0000:00:1f.2: reg 18: [io  0xe800-0xe807]
[    0.356604] pci 0000:00:1f.2: reg 1c: [io  0xe900-0xe903]
[    0.356612] pci 0000:00:1f.2: reg 20: [io  0xea00-0xea1f]
[    0.356619] pci 0000:00:1f.2: reg 24: [mem 0xfa102000-0xfa1027ff]
[    0.356660] pci 0000:00:1f.2: PME# supported from D3hot
[    0.356663] pci 0000:00:1f.2: PME# disabled
[    0.356679] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.356693] pci 0000:00:1f.3: reg 10: [mem 0xfa103000-0xfa1030ff 64bit]
[    0.356712] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.356767] pci 0000:01:00.0: [1002:94c3] type 0 class 0x000300
[    0.356780] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.356790] pci 0000:01:00.0: reg 18: [mem 0xf5000000-0xf500ffff 64bit]
[    0.356797] pci 0000:01:00.0: reg 20: [io  0xa000-0xa0ff]
[    0.356810] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.356839] pci 0000:01:00.0: supports D1 D2
[    0.356858] pci 0000:01:00.1: [1002:aa10] type 0 class 0x000403
[    0.356870] pci 0000:01:00.1: reg 10: [mem 0xf5010000-0xf5013fff 64bit]
[    0.356925] pci 0000:01:00.1: supports D1 D2
[    0.356953] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.356956] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.356959] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.356963] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.356999] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.357002] pci 0000:00:1c.0:   bridge window [io  0x9000-0x9fff]
[    0.357064] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[    0.357082] pci 0000:03:00.0: reg 10: [io  0xb000-0xb0ff]
[    0.357112] pci 0000:03:00.0: reg 18: [mem 0xf7000000-0xf7000fff 64bit]
[    0.357146] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.357221] pci 0000:03:00.0: supports D1 D2
[    0.357223] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.357228] pci 0000:03:00.0: PME# disabled
[    0.357250] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.357259] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.357263] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    0.357266] pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.357322] pci 0000:04:00.0: [197b:2363] type 0 class 0x000106
[    0.357404] pci 0000:04:00.0: reg 24: [mem 0xfa000000-0xfa001fff]
[    0.357464] pci 0000:04:00.0: PME# supported from D3hot
[    0.357469] pci 0000:04:00.0: PME# disabled
[    0.357498] pci 0000:04:00.1: [197b:2363] type 0 class 0x000101
[    0.357521] pci 0000:04:00.1: reg 10: [io  0xc000-0xc007]
[    0.357534] pci 0000:04:00.1: reg 14: [io  0xc100-0xc103]
[    0.357548] pci 0000:04:00.1: reg 18: [io  0xc200-0xc207]
[    0.357561] pci 0000:04:00.1: reg 1c: [io  0xc300-0xc303]
[    0.357574] pci 0000:04:00.1: reg 20: [io  0xc400-0xc40f]
[    0.357652] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.357665] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.357668] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.357672] pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfa0fffff]
[    0.357733] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[    0.357750] pci 0000:05:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.357780] pci 0000:05:00.0: reg 18: [mem 0xf9000000-0xf9000fff 64bit]
[    0.357814] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.357889] pci 0000:05:00.0: supports D1 D2
[    0.357891] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.357897] pci 0000:05:00.0: PME# disabled
[    0.357918] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.357927] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.357931] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.357935] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.357993] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[    0.357997] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[    0.358004] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.358007] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.358029] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.358197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.358238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.358280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.358331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.358374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.358499]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.358503]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.358505] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.369863] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.369914] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.369963] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[    0.370012] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.370061] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.370111] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.370162] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.370212] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.370314] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.370314] vgaarb: loaded
[    0.370314] vgaarb: bridge control possible 0000:01:00.0
[    0.370314] PCI: Using ACPI for IRQ routing
[    0.370314] PCI: pci_cache_line_size set to 64 bytes
[    0.370314] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
[    0.370314] reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff 
[    0.370314] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.370314] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.370314] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.380444] Switching to clocksource hpet
[    0.381956] pnp: PnP ACPI init
[    0.381970] ACPI: bus type pnp registered
[    0.382046] pnp 00:00: [bus 00-3f]
[    0.382048] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.382051] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.382053] pnp 00:00: [io  0x0d00-0xffff window]
[    0.382055] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.382057] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.382060] pnp 00:00: [mem 0xbff00000-0xfebfffff window]
[    0.382116] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.382198] pnp 00:01: [io  0x0010-0x001f]
[    0.382201] pnp 00:01: [io  0x0022-0x003f]
[    0.382202] pnp 00:01: [io  0x0044-0x005f]
[    0.382204] pnp 00:01: [io  0x0062-0x0063]
[    0.382206] pnp 00:01: [io  0x0065-0x006f]
[    0.382208] pnp 00:01: [io  0x0074-0x007f]
[    0.382210] pnp 00:01: [io  0x0091-0x0093]
[    0.382212] pnp 00:01: [io  0x00a2-0x00bf]
[    0.382213] pnp 00:01: [io  0x00e0-0x00ef]
[    0.382215] pnp 00:01: [io  0x04d0-0x04d1]
[    0.382217] pnp 00:01: [io  0x0290-0x029f]
[    0.382219] pnp 00:01: [io  0x0800-0x087f]
[    0.382222] pnp 00:01: [io  0x0290-0x0294]
[    0.382224] pnp 00:01: [io  0x0880-0x088f]
[    0.382288] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.382291] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.382294] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.382297] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.382299] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.382302] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382315] pnp 00:02: [dma 4]
[    0.382317] pnp 00:02: [io  0x0000-0x000f]
[    0.382318] pnp 00:02: [io  0x0080-0x0090]
[    0.382320] pnp 00:02: [io  0x0094-0x009f]
[    0.382322] pnp 00:02: [io  0x00c0-0x00df]
[    0.382353] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.382364] pnp 00:03: [io  0x0070-0x0073]
[    0.382373] pnp 00:03: [irq 8]
[    0.382406] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.382415] pnp 00:04: [io  0x0061]
[    0.382447] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.382457] pnp 00:05: [io  0x00f0-0x00ff]
[    0.382462] pnp 00:05: [irq 13]
[    0.382494] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.382613] pnp 00:06: [io  0x03f0-0x03f5]
[    0.382615] pnp 00:06: [io  0x03f7]
[    0.382620] pnp 00:06: [irq 6]
[    0.382621] pnp 00:06: [dma 2]
[    0.382670] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.382837] pnp 00:07: [io  0x03f8-0x03ff]
[    0.382842] pnp 00:07: [irq 4]
[    0.382906] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.383096] pnp 00:08: [io  0x0378-0x037f]
[    0.383101] pnp 00:08: [irq 7]
[    0.383155] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.383246] pnp 00:09: [io  0x0060]
[    0.383248] pnp 00:09: [io  0x0064]
[    0.383253] pnp 00:09: [irq 1]
[    0.383288] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.383321] pnp 00:0a: [io  0x0400-0x04bf]
[    0.383374] system 00:0a: [io  0x0400-0x04bf] has been reserved
[    0.383378] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.383578] pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
[    0.383621] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.383624] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.383814] pnp 00:0c: [mem 0x000d5000-0x000d7fff]
[    0.383817] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[    0.383819] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[    0.383821] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[    0.383823] pnp 00:0c: [mem 0xbfee0000-0xbfefffff]
[    0.383825] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.383827] pnp 00:0c: [mem 0x00100000-0xbfedffff]
[    0.383829] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.383831] pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
[    0.383833] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
[    0.383835] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[    0.383837] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
[    0.383839] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[    0.383841] pnp 00:0c: [mem 0x000e0000-0x000effff]
[    0.383912] system 00:0c: [mem 0x000d5000-0x000d7fff] has been reserved
[    0.383915] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.383918] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.383921] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.383924] system 00:0c: [mem 0xbfee0000-0xbfefffff] could not be reserved
[    0.383926] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.383929] system 00:0c: [mem 0x00100000-0xbfedffff] could not be reserved
[    0.383932] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.383935] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.383938] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.383941] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.383944] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.383947] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[    0.383950] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[    0.383953] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.383973] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[    0.384030] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[    0.384036] pnp: PnP ACPI: found 14 devices
[    0.384037] ACPI: ACPI bus type pnp unregistered
[    0.392297] PCI: max bus depth: 1 pci_try_num: 2
[    0.392336] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
[    0.392340] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0100000-0xc01fffff pref]
[    0.392343] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0100000-0xc03fffff pref]
[    0.392347] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.392350] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0600000-0xc08fffff pref]
[    0.392354] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0900000-0xc0afffff]
[    0.392357] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0b00000-0xc0cfffff 64bit pref]
[    0.392361] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[    0.392364] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.392367] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.392370] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.392373] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.392378] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.392380] pci 0000:00:1c.0:   bridge window [io  0x9000-0x9fff]
[    0.392385] pci 0000:00:1c.0:   bridge window [mem 0xc0900000-0xc0afffff]
[    0.392389] pci 0000:00:1c.0:   bridge window [mem 0xc0b00000-0xc0cfffff 64bit pref]
[    0.392395] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0600000-0xc061ffff pref]
[    0.392397] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.392400] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    0.392405] pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.392409] pci 0000:00:1c.1:   bridge window [mem 0xc0600000-0xc08fffff pref]
[    0.392414] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.392417] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.392421] pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfa0fffff]
[    0.392425] pci 0000:00:1c.3:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.392431] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0100000-0xc011ffff pref]
[    0.392434] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.392437] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.392441] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.392445] pci 0000:00:1c.4:   bridge window [mem 0xc0100000-0xc03fffff pref]
[    0.392450] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.392453] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[    0.392471] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.392475] pci 0000:00:01.0: setting latency timer to 64
[    0.392481] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.392484] pci 0000:00:1c.0: setting latency timer to 64
[    0.392493] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.392497] pci 0000:00:1c.1: setting latency timer to 64
[    0.392506] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.392510] pci 0000:00:1c.3: setting latency timer to 64
[    0.392515] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.392519] pci 0000:00:1c.4: setting latency timer to 64
[    0.392524] pci 0000:00:1e.0: setting latency timer to 64
[    0.392528] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.392530] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[    0.392533] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.392535] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
[    0.392537] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.392540] pci_bus 0000:02: resource 0 [io  0x9000-0x9fff]
[    0.392542] pci_bus 0000:02: resource 1 [mem 0xc0900000-0xc0afffff]
[    0.392544] pci_bus 0000:02: resource 2 [mem 0xc0b00000-0xc0cfffff 64bit pref]
[    0.392547] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    0.392549] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.392552] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc08fffff pref]
[    0.392554] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.392556] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfa0fffff]
[    0.392559] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.392561] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.392563] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.392566] pci_bus 0000:05: resource 2 [mem 0xc0100000-0xc03fffff pref]
[    0.392568] pci_bus 0000:06: resource 0 [io  0x8000-0x8fff]
[    0.392570] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.392573] pci_bus 0000:06: resource 5 [mem 0x00000000-0xfffffffff]
[    0.392691] NET: Registered protocol family 2
[    0.392867] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.394027] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.399142] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.399895] TCP: Hash tables configured (established 524288 bind 65536)
[    0.399897] TCP reno registered
[    0.399911] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.399965] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.400224] NET: Registered protocol family 1
[    0.400254] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.400270] pci 0000:00:1a.0: PCI INT A disabled
[    0.400287] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.400301] pci 0000:00:1a.1: PCI INT B disabled
[    0.400312] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.400327] pci 0000:00:1a.2: PCI INT C disabled
[    0.400335] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.400359] pci 0000:00:1a.7: PCI INT C disabled
[    0.400378] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.400392] pci 0000:00:1d.0: PCI INT A disabled
[    0.400400] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.400415] pci 0000:00:1d.1: PCI INT B disabled
[    0.400422] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.400437] pci 0000:00:1d.2: PCI INT C disabled
[    0.400445] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.400458] pci 0000:00:1d.7: PCI INT A disabled
[    0.400472] pci 0000:01:00.0: Boot video device
[    0.400487] PCI: CLS 32 bytes, default 64
[    0.400545] Unpacking initramfs...
[    0.645076] Freeing initrd memory: 11456k freed
[    0.650049] audit: initializing netlink socket (disabled)
[    0.650070] type=2000 audit(1336117678.644:1): initialized
[    0.670356] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.685991] VFS: Disk quotas dquot_6.5.2
[    0.686039] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.686129] msgmni has been set to 6039
[    0.686376] alg: No test for stdrng (krng)
[    0.686435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.686439] io scheduler noop registered
[    0.686441] io scheduler deadline registered
[    0.686460] io scheduler cfq registered (default)
[    0.686566] pcieport 0000:00:01.0: setting latency timer to 64
[    0.686595] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.686644] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.686676] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.686732] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.686765] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.686819] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.686851] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.686906] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.686937] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[    0.687020] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.687045] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.687047] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.687392] intel_idle: MWAIT substates: 0x20
[    0.687394] intel_idle: does not run on family 6 model 15
[    0.687419] ERST: Table is not found!
[    0.687420] GHES: HEST is not enabled!
[    0.687501] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.707842] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.860654] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.896292] Linux agpgart interface v0.103
[    0.896536] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.896538] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.896668] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.896815] mousedev: PS/2 mouse device common for all mice
[    0.896870] rtc_cmos 00:03: RTC can wake from S4
[    0.896997] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.897027] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.897038] cpuidle: using governor ladder
[    0.897039] cpuidle: using governor menu
[    0.897243] TCP cubic registered
[    0.897335] NET: Registered protocol family 10
[    0.897821] Mobile IPv6
[    0.897824] NET: Registered protocol family 17
[    0.897828] Registering the dns_resolver key type
[    0.898009] PM: Hibernation image not present or could not be loaded.
[    0.898019] registered taskstats version 1
[    0.906323] rtc_cmos 00:03: setting system clock to 2012-05-04 07:47:59 UTC (1336117679)
[    0.906364] Initializing network drop monitor service
[    0.907590] Freeing unused kernel memory: 568k freed
[    0.907707] Write protecting the kernel read-only data: 6144k
[    0.910284] Freeing unused kernel memory: 676k freed
[    0.912895] Freeing unused kernel memory: 668k freed
[    0.920631] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.926460] udevd[59]: starting version 175
[    0.938925] usbcore: registered new interface driver usbfs
[    0.938952] usbcore: registered new interface driver hub
[    0.952442] usbcore: registered new device driver usb
[    0.952923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.952967] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.952990] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.952994] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.953023] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.955662] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.955684] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.955712] r8169 0000:03:00.0: setting latency timer to 64
[    0.955799] r8169 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.956297] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc9000067c000, 00:0a:cd:19:08:4d, XID 18000000 IRQ 45
[    0.956300] r8169 0000:03:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    0.956824] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.956840] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.956863] r8169 0000:05:00.0: setting latency timer to 64
[    0.956958] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[    0.956960] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.957390] r8169 0000:05:00.0: eth1: RTL8168b/8111b at 0xffffc9000518c000, 00:1a:4d:93:0c:cc, XID 18000000 IRQ 46
[    0.957393] r8169 0000:05:00.0: eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    0.959246] SCSI subsystem initialized
[    0.960563] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa100000
[    0.964655] libata version 3.00 loaded.
[    0.969246] uhci_hcd: USB Universal Host Controller Interface driver
[    0.973023] Floppy drive(s): fd0 is 1.44M
[    0.976039] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.976091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.976093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.976096] usb usb1: Product: EHCI Host Controller
[    0.976098] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[    0.976100] usb usb1: SerialNumber: 0000:00:1a.7
[    0.976294] hub 1-0:1.0: USB hub found
[    0.976299] hub 1-0:1.0: 6 ports detected
[    0.976406] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.976430] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.976434] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.976443] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.976821] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.976853] pata_jmicron 0000:04:00.1: setting latency timer to 64
[    0.977695] scsi0 : pata_jmicron
[    0.977801] scsi1 : pata_jmicron
[    0.978354] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
[    0.978357] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
[    0.980360] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.980396] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa101000
[    0.991669] FDC 0 is a post-1991 82077
[    0.996060] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.996090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.996094] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.996098] usb usb2: Product: EHCI Host Controller
[    0.996101] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[    0.996104] usb usb2: SerialNumber: 0000:00:1d.7
[    0.996255] hub 2-0:1.0: USB hub found
[    0.996259] hub 2-0:1.0: 6 ports detected
[    0.996354] ahci 0000:00:1f.2: version 3.0
[    0.996369] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.996412] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    0.996459] ahci: SSS flag set, parallel bus scan disabled
[    0.996486] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.996489] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
[    0.996493] ahci 0000:00:1f.2: setting latency timer to 64
[    1.024781] scsi2 : ahci
[    1.024880] scsi3 : ahci
[    1.025044] scsi4 : ahci
[    1.025147] scsi5 : ahci
[    1.025309] scsi6 : ahci
[    1.025463] scsi7 : ahci
[    1.025649] ata3: SATA max UDMA/133 abar m2048 at 0xfa102000 port 0xfa102100 irq 47
[    1.025653] ata4: SATA max UDMA/133 abar m2048 at 0xfa102000 port 0xfa102180 irq 47
[    1.025655] ata5: DUMMY
[    1.025656] ata6: DUMMY
[    1.025658] ata7: SATA max UDMA/133 abar m2048 at 0xfa102000 port 0xfa102300 irq 47
[    1.025661] ata8: SATA max UDMA/133 abar m2048 at 0xfa102000 port 0xfa102380 irq 47
[    1.025704] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.025711] ahci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.025729] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.025732] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.025748] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.025784] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[    1.025819] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.025822] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.025824] usb usb3: Product: UHCI Host Controller
[    1.025826] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[    1.025827] usb usb3: SerialNumber: 0000:00:1a.0
[    1.025969] hub 3-0:1.0: USB hub found
[    1.025974] hub 3-0:1.0: 2 ports detected
[    1.026088] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.026095] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.026098] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.026106] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.026139] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[    1.026169] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.026172] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.026174] usb usb4: Product: UHCI Host Controller
[    1.026176] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[    1.026178] usb usb4: SerialNumber: 0000:00:1a.1
[    1.026290] hub 4-0:1.0: USB hub found
[    1.026294] hub 4-0:1.0: 2 ports detected
[    1.026386] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.026393] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.026395] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.026402] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.026424] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e200
[    1.026455] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.026458] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.026460] usb usb5: Product: UHCI Host Controller
[    1.026462] usb usb5: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[    1.026463] usb usb5: SerialNumber: 0000:00:1a.2
[    1.026615] hub 5-0:1.0: USB hub found
[    1.026619] hub 5-0:1.0: 2 ports detected
[    1.026698] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.026706] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.026708] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.026716] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.026738] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[    1.026768] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.026771] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.026773] usb usb6: Product: UHCI Host Controller
[    1.026774] usb usb6: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[    1.026776] usb usb6: SerialNumber: 0000:00:1d.0
[    1.026888] hub 6-0:1.0: USB hub found
[    1.026892] hub 6-0:1.0: 2 ports detected
[    1.026960] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.026967] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.026970] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.026977] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.027006] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[    1.027037] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.027039] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.027041] usb usb7: Product: UHCI Host Controller
[    1.027043] usb usb7: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[    1.027045] usb usb7: SerialNumber: 0000:00:1d.1
[    1.027158] hub 7-0:1.0: USB hub found
[    1.027162] hub 7-0:1.0: 2 ports detected
[    1.027246] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.027253] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.027256] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.027263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.027284] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[    1.027313] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.027316] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.027318] usb usb8: Product: UHCI Host Controller
[    1.027319] usb usb8: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[    1.027321] usb usb8: SerialNumber: 0000:00:1d.2
[    1.027444] hub 8-0:1.0: USB hub found
[    1.027448] hub 8-0:1.0: 2 ports detected
[    1.044075] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.044081] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.044089] ahci 0000:04:00.0: setting latency timer to 64
[    1.044466] scsi8 : ahci
[    1.044574] scsi9 : ahci
[    1.044683] ata9: SATA max UDMA/133 abar m8192 at 0xfa000000 port 0xfa000100 irq 19
[    1.044687] ata10: SATA max UDMA/133 abar m8192 at 0xfa000000 port 0xfa000180 irq 19
[    1.344031] ata3: SATA link down (SStatus 0 SControl 300)
[    1.472021] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    1.536035] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.536061] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.536231] ata9.00: ATAPI: ASUS    DRW-1814BLT, 1.13, max UDMA/66
[    1.536543] ata9.00: configured for UDMA/66
[    1.561877] ata10.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
[    1.561881] ata10.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.562779] ata10.00: configured for UDMA/133
[    1.648038] Refined TSC clocksource calibration: 2399.999 MHz.
[    1.648043] Switching to clocksource tsc
[    1.648820] usb 3-1: New USB device found, idVendor=046d, idProduct=c00e
[    1.648824] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.648827] usb 3-1: Product: USB-PS/2 Optical Mouse
[    1.648830] usb 3-1: Manufacturer: Logitech
[    1.664026] ata4: SATA link down (SStatus 0 SControl 300)
[    2.156024] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.157894] ata7.00: HPA detected: current 293044655, native 293046768
[    2.158424] ata7.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[    2.158428] ata7.00: 293044655 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.161396] ata7.00: configured for UDMA/133
[    2.161535] scsi 6:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[    2.480025] ata8: SATA link down (SStatus 0 SControl 300)
[    2.480511] scsi 8:0:0:0: CD-ROM            ASUS     DRW-1814BLT      1.13 PQ: 0 ANSI: 5
[    2.480812] scsi 9:0:0:0: Direct-Access     ATA      WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
[    2.483587] sd 6:0:0:0: [sda] 293044655 512-byte logical blocks: (150 GB/139 GiB)
[    2.483595] sd 9:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.483655] sd 9:0:0:0: [sdb] Write Protect is off
[    2.483657] sd 9:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.483679] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.484063] sd 6:0:0:0: [sda] Write Protect is off
[    2.484066] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.484088] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.490724]  sdb: sdb1 sdb2
[    2.491061] sd 9:0:0:0: [sdb] Attached SCSI disk
[    2.497198]  sda: sda1 sda2 sda3
[    2.497616] sd 6:0:0:0: [sda] Attached SCSI disk
[    2.500307] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.500313] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.500498] sr 8:0:0:0: Attached scsi CD-ROM sr0
[    2.511068] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1
[    2.511185] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1/input0
[    2.511209] usbcore: registered new interface driver usbhid
[    2.511211] usbhid: USB HID core driver
[    3.248925] device-mapper: uevent: version 1.0.3
[    3.249051] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
[   14.007988] Intel AES-NI instructions are not detected.
[   21.297425] Btrfs loaded
[   21.389648] device label panscho_root devid 1 transid 24171 /dev/dm-0
[   21.392910] device label panscho_root devid 1 transid 24171 /dev/mapper/sda2_crypt
[   21.393168] btrfs: disk space caching is enabled
[   23.123802] udevd[388]: starting version 175
[   23.901599] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   23.901606] ACPI: Power Button [PWRB]
[   23.901687] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   23.901690] ACPI: Power Button [PWRF]
[   23.961282] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   24.031302] parport_pc 00:08: reported by Plug and Play ACPI
[   24.031345] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   24.067706] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   24.156536] iTCO_vendor_support: vendor-support=0
[   24.180741] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   24.180865] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0460)
[   24.180971] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   24.197941] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   24.197993] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[   24.198017] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[   24.300351] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   24.300354] Disabling lock debugging due to kernel taint
[   24.300924] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   24.301044] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input5
[   24.376028] [fglrx] Maximum main memory to use for locked dma buffers: 2875 MBytes.
[   24.376261] [fglrx]   vendor: 1002 device: 94c3 count: 1
[   24.376902] [fglrx] ioport: bar 4, base 0xa000, size: 0x100
[   24.376914] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   24.376919] pci 0000:01:00.0: setting latency timer to 64
[   24.377371] [fglrx] Kernel PAT support is enabled
[   24.377390] [fglrx] module loaded - fglrx 8.95.3 [Mar  8 2012] with 1 minors
[   25.930116] btrfs: use zlib compression
[   25.930118] btrfs: disk space caching is enabled
[   26.506669] loop: module loaded
[   28.839396] Adding 2048280k swap on /dev/mapper/sda3_crypt.  Priority:-1 extents:1 across:2048280k 
[   29.056670] device label panscho_root devid 1 transid 24171 /dev/mapper/sda2_crypt
[   29.165930] device label storbtrfs devid 1 transid 308 /dev/mapper/sdb2_crypt
[   29.166249] btrfs: use zlib compression
[   29.166253] btrfs: disk space caching is enabled
[   31.095925] RPC: Registered named UNIX socket transport module.
[   31.095928] RPC: Registered udp transport module.
[   31.095929] RPC: Registered tcp transport module.
[   31.095931] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   31.138222] FS-Cache: Loaded
[   31.174284] FS-Cache: Netfs 'nfs' registered for caching
[   31.191634] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[   33.611455] r8169 0000:03:00.0: eth0: link down
[   33.611941] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.747875] r8169 0000:05:00.0: eth1: link down
[   33.747885] r8169 0000:05:00.0: eth1: link down
[   33.748404] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   35.864343] r8169 0000:05:00.0: eth1: link up
[   35.864889] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   37.300908] Bluetooth: Core ver 2.16
[   37.300927] NET: Registered protocol family 31
[   37.300929] Bluetooth: HCI device and connection manager initialized
[   37.300931] Bluetooth: HCI socket layer initialized
[   37.300933] Bluetooth: L2CAP socket layer initialized
[   37.300938] Bluetooth: SCO socket layer initialized
[   37.317534] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   37.317542] Bluetooth: BNEP filters: protocol multicast
[   37.325762] Bluetooth: RFCOMM TTY layer initialized
[   37.325768] Bluetooth: RFCOMM socket layer initialized
[   37.325771] Bluetooth: RFCOMM ver 1.11
[   38.137907] fglrx_pci 0000:01:00.0: irq 49 for MSI/MSI-X
[   38.139138] [fglrx] Firegl kernel thread PID: 1648
[   38.139275] [fglrx] Firegl kernel thread PID: 1649
[   38.139413] [fglrx] Firegl kernel thread PID: 1650
[   38.139583] [fglrx] IRQ 49 Enabled
[   38.228181] lp0: using parport0 (interrupt-driven).
[   38.260717] ppdev: user-space parallel port driver
[   39.829785] [fglrx] Gart USWC size:944 M.
[   39.829789] [fglrx] Gart cacheable size:373 M.
[   39.829796] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   39.829800] [fglrx] Reserved FB block: Unshared offset:fd07000, size:2f5000 
[   39.829804] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000 
[   46.992010] eth1: no IPv6 routers present
[  287.870631] gnome-panel[3752]: segfault at 7f758915530f ip 00007f7586323eef sp 00007fff8da8fb30 error 7 in libglib-2.0.so.0.3200.0[7f75862c0000+f5000]

*** /var/tmp/lspci-vnn.txt
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
	Subsystem: Giga-byte Technology Device [1458:5000]
	Flags: bus master, fast devsel, latency 0
	Capabilities: [e0] Vendor Specific Information: Len=0b <?>

00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: f4000000-f5ffffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
	Capabilities: [88] Subsystem: Giga-byte Technology Device [1458:5000]
	Capabilities: [80] Power Management version 3
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [a0] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel
	Capabilities: [140] Root Complex Link
	Kernel driver in use: pcieport

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at e000 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 21
	I/O ports at e100 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at e200 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Device [1458:5006]
	Flags: bus master, medium devsel, latency 0, IRQ 18
	Memory at fa100000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Kernel driver in use: ehci_hcd

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: c0900000-c0afffff
	Prefetchable memory behind bridge: 00000000c0b00000-00000000c0cfffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Giga-byte Technology Device [1458:5001]
	Capabilities: [a0] Power Management version 2
	Capabilities: [100] Virtual Channel
	Capabilities: [180] Root Complex Link
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: f6000000-f7ffffff
	Prefetchable memory behind bridge: 00000000c0600000-00000000c08fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Giga-byte Technology Device [1458:5001]
	Capabilities: [a0] Power Management version 2
	Capabilities: [100] Virtual Channel
	Capabilities: [180] Root Complex Link
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fa000000-fa0fffff
	Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Giga-byte Technology Device [1458:5001]
	Capabilities: [a0] Power Management version 2
	Capabilities: [100] Virtual Channel
	Capabilities: [180] Root Complex Link
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: f8000000-f9ffffff
	Prefetchable memory behind bridge: 00000000c0100000-00000000c03fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Giga-byte Technology Device [1458:5001]
	Capabilities: [a0] Power Management version 2
	Capabilities: [100] Virtual Channel
	Capabilities: [180] Root Complex Link
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 23
	I/O ports at e300 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 19
	I/O ports at e400 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Device [1458:5004]
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at e500 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Device [1458:5006]
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at fa101000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
	I/O behind bridge: 00008000-00008fff
	Capabilities: [50] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5000]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
	Subsystem: Giga-byte Technology Device [1458:5001]
	Flags: bus master, medium devsel, latency 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 SATA controller [0106]: Intel Corporation 82801IB (ICH9) 4 port SATA Controller [AHCI mode] [8086:2923] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Giga-byte Technology Device [1458:b005]
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 47
	I/O ports at e600 [size=8]
	I/O ports at e700 [size=4]
	I/O ports at e800 [size=8]
	I/O ports at e900 [size=4]
	I/O ports at ea00 [size=32]
	Memory at fa102000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
	Capabilities: [70] Power Management version 3
	Capabilities: [a8] SATA HBA v1.0
	Capabilities: [b0] PCI Advanced Features
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
	Subsystem: Giga-byte Technology Device [1458:5001]
	Flags: medium devsel, IRQ 18
	Memory at fa103000 (64-bit, non-prefetchable) [size=256]
	I/O ports at 0500 [size=32]
	Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV610 video device [Radeon HD 2400 PRO] [1002:94c3] (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:01c2]
	Flags: bus master, fast devsel, latency 0, IRQ 49
	Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Memory at f5000000 (64-bit, non-prefetchable) [size=64K]
	I/O ports at a000 [size=256]
	[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Legacy Endpoint, MSI 00
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Kernel driver in use: fglrx_pci

01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV610 HDMI Audio [Radeon HD 2350/2400 Series] [1002:aa10]
	Subsystem: ASUSTeK Computer Inc. Device [1043:aa10]
	Flags: bus master, fast devsel, latency 0, IRQ 48
	Memory at f5010000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Legacy Endpoint, MSI 00
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Kernel driver in use: snd_hda_intel

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
	Subsystem: Realtek Semiconductor Co., Ltd. TEG-ECTX Gigabit PCI-E Adapter [Trendnet] [10ec:8168]
	Flags: bus master, fast devsel, latency 0, IRQ 45
	I/O ports at b000 [size=256]
	Memory at f7000000 (64-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at c0600000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
	Capabilities: [48] Vital Product Data
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
	Capabilities: [60] Express Endpoint, MSI 00
	Capabilities: [84] Vendor Specific Information: Len=4c <?>
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [12c] Virtual Channel
	Capabilities: [148] Device Serial Number f8-06-00-00-10-ec-81-68
	Capabilities: [154] Power Budgeting <?>
	Kernel driver in use: r8169

04:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
	Flags: bus master, fast devsel, latency 0, IRQ 19
	Memory at fa000000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [68] Power Management version 2
	Capabilities: [50] Express Legacy Endpoint, MSI 01
	Kernel driver in use: ahci

04:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	I/O ports at c000 [size=8]
	I/O ports at c100 [size=4]
	I/O ports at c200 [size=8]
	I/O ports at c300 [size=4]
	I/O ports at c400 [size=16]
	Capabilities: [68] Power Management version 2
	Kernel driver in use: pata_jmicron

05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
	Flags: bus master, fast devsel, latency 0, IRQ 46
	I/O ports at d000 [size=256]
	Memory at f9000000 (64-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at c0100000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
	Capabilities: [48] Vital Product Data
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
	Capabilities: [60] Express Endpoint, MSI 00
	Capabilities: [84] Vendor Specific Information: Len=4c <?>
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [12c] Virtual Channel
	Capabilities: [148] Device Serial Number 00-00-00-00-10-ec-81-68
	Capabilities: [154] Power Budgeting <?>
	Kernel driver in use: r8169



-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages gnome-panel depends on:
ii  gnome-icon-theme-symbolic  3.4.0-2
ii  gnome-menus                3.2.0.1-2
ii  gnome-panel-data           3.2.1-2
ii  libatk1.0-0                2.4.0-2
ii  libc6                      2.13-30
ii  libcairo-gobject2          1.10.2-7
ii  libcairo2                  1.10.2-7
ii  libcamel-1.2-29            3.2.2-1
ii  libdconf0                  0.10.0-3
ii  libebook-1.2-12            3.2.2-1
ii  libecal-1.2-10             3.2.2-1
ii  libedataserver-1.2-15      3.2.2-1
ii  libedataserverui-3.0-1     3.2.2-1
ii  libfontconfig1             2.8.0-3.1
ii  libfreetype6               2.4.9-1
ii  libgconf2-4                3.2.3-4
ii  libgdk-pixbuf2.0-0         2.26.1-1
ii  libglib2.0-0               2.32.0-4
ii  libgnome-desktop-3-2       3.2.1-4
ii  libgnome-menu-3-0          3.2.0.1-2
ii  libgtk-3-0                 3.2.3-1
ii  libgweather-3-0            3.4.1-1
ii  libical0                   0.44-3
ii  libice6                    2:1.0.8-2
ii  libnspr4-0d                4.9-1
ii  libnss3-1d                 3.13.3-1
ii  libpanel-applet-4-0        3.2.1-2+b1
ii  libpango1.0-0              1.29.4-3+b1
ii  librsvg2-2                 2.36.1-1
ii  libsm6                     2:1.2.1-2
ii  libsoup2.4-1               2.38.1-2
ii  libsqlite3-0               3.7.11-2
ii  libtelepathy-glib0         0.16.2-1+b1
ii  libwnck-3-0                3.4.0-1
ii  libx11-6                   2:1.4.4-4
ii  libxau6                    1:1.0.7-1
ii  libxml2                    2.7.8.dfsg-9
ii  libxrandr2                 2:1.3.2-2
ii  python                     2.7.2-10
ii  python-gconf               2.28.1+dfsg-1

Versions of packages gnome-panel recommends:
ii  alacarte               0.13.2-3
ii  evolution-data-server  3.2.2-1
ii  gnome-applets          3.4.1-1
ii  gnome-control-center   1:3.2.2-3+b1
ii  gnome-icon-theme       3.4.0-2
ii  gnome-session          3.2.1-1
ii  gvfs                   1.12.0-1

Versions of packages gnome-panel suggests:
ii  epiphany-browser                      3.2.1-2
ii  evolution                             3.2.2-1
ii  gnome-terminal [x-terminal-emulator]  3.4.1.1-1
ii  gnome-user-guide [gnome2-user-guide]  3.4.1-1
ii  konsole [x-terminal-emulator]         4:4.7.4-2
ii  nautilus                              3.2.1-3
ii  xterm [x-terminal-emulator]           278-1
ii  yelp                                  3.4.1-1

-- no debconf information





More information about the pkg-gnome-maintainers mailing list