Bug#721697: gnome-panel: error 4 in libclock-applet.so, gnome-panel segfault
Tijs Maas
tijsxdmaas at gmail.com
Tue Sep 3 08:13:41 UTC 2013
Package: gnome-panel
Version: 3.4.2.1-4
Severity: normal
Dear Maintainer,
* What led up to the situation?
I use gnome 3.4 in safe graphics mode. I clicked on the clock applet a
lot of times to check some dates.
* What exactly did you do (or not do) that was effective (or
ineffective)?
After a while the applet did not open any more. I tried clicking a few
times but without effect.
* What was the outcome of this action?
A few minutes after the clicking, gnome suddenly crashed.
I use up-to-date debian wheezy, dmesg stated the following:
(It might be related to ACPI or sleep but I am not sure)
[83934.036328] usb 2-1.1: Product: TTL232R-3V3
[83934.036335] usb 2-1.1: Manufacturer: FTDI
[83934.036341] usb 2-1.1: SerialNumber: FTFAF0V8
[83934.038647] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
[83934.038726] usb 2-1.1: Detected FT232RL
[83934.038732] usb 2-1.1: Number of endpoints 2
[83934.038740] usb 2-1.1: Endpoint 1 MaxPacketSize 64
[83934.038747] usb 2-1.1: Endpoint 2 MaxPacketSize 64
[83934.038753] usb 2-1.1: Setting MaxPacketSize 64
[83934.039202] usb 2-1.1: FTDI USB Serial Device converter now attached to
ttyUSB0
[83938.344804] usb 2-1.1: USB disconnect, device number 22
[83938.345120] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[83938.345154] ftdi_sio 2-1.1:1.0: device disconnected
[83950.190489] PM: Syncing filesystems ... done.
[83950.194731] PM: Preparing system for mem sleep
[83950.805851] Freezing user space processes ... (elapsed 0.01 seconds) done.
[83950.821292] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[83950.837285] PM: Entering mem sleep
[83950.837397] Suspending console(s) (use no_console_suspend to debug)
[83950.837864] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[83950.838070] sd 1:0:0:0: [sdb] Stopping disk
[83950.838385] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[83950.839024] sd 0:0:0:0: [sda] Stopping disk
[83951.476884] PM: suspend of devices complete after 639.721 msecs
[83951.477144] r8169 0000:04:00.0: wake-up capability enabled by ACPI
[83951.509068] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[83951.525124] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[83951.540974] PM: late suspend of devices complete after 64.105 msecs
[83951.541645] ACPI: Preparing to enter system sleep state S3
[83951.548942] PM: Saving platform NVS memory
[83951.550624] Disabling non-boot CPUs ...
[83951.652740] CPU 1 is now offline
[83951.756688] CPU 2 is now offline
[83951.860631] CPU 3 is now offline
[83951.861207] Extended CMOS year: 2000
[83951.861471] ACPI: Low-level resume complete
[83951.861522] PM: Restoring platform NVS memory
[83951.861980] Extended CMOS year: 2000
[83951.862018] Enabling non-boot CPUs ...
[83951.862199] Booting Node 0 Processor 1 APIC 0x2
[83951.862201] smpboot cpu 1: start_ip = 99000
[83951.873221] Calibrating delay loop (skipped) already calibrated this CPU
[83951.893549] NMI watchdog enabled, takes one hw-pmu counter.
[83951.893827] CPU1 is up
[83951.893970] Booting Node 0 Processor 2 APIC 0x1
[83951.893971] smpboot cpu 2: start_ip = 99000
[83951.904994] Calibrating delay loop (skipped) already calibrated this CPU
[83951.925496] NMI watchdog enabled, takes one hw-pmu counter.
[83951.925805] CPU2 is up
[83951.926260] Booting Node 0 Processor 3 APIC 0x3
[83951.926261] smpboot cpu 3: start_ip = 99000
[83951.937282] Calibrating delay loop (skipped) already calibrated this CPU
[83951.957730] NMI watchdog enabled, takes one hw-pmu counter.
[83951.958064] CPU3 is up
[83951.961413] ACPI: Waking up from system sleep state S3
[83952.110345] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[83952.110681] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[83952.111150] PM: early resume of devices complete after 1.000 msecs
[83952.111262] i915 0000:00:02.0: setting latency timer to 64
[83952.111277] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[83952.111280] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[83952.111317] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[83952.111344] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[83952.111375] ahci 0000:00:1f.2: setting latency timer to 64
[83952.111432] r8169 0000:04:00.0: wake-up capability disabled by ACPI
[83952.118393] sd 0:0:0:0: [sda] Starting disk
[83952.118421] sd 1:0:0:0: [sdb] Starting disk
[83952.150083] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[83952.361373] usb 1-1.2: reset high-speed USB device number 3 using ehci_hcd
[83952.437193] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[83952.438200] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[83952.438211] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[83952.438219] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[83952.439202] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[83952.439212] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[83952.439221] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[83952.439501] ata1.00: configured for UDMA/133
[83952.533365] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd
[83954.460110] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[83954.738207] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[83954.738219] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[83954.738227] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[83954.774535] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[83954.774547] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[83954.774555] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[83954.775867] ata2.00: configured for UDMA/133
[83954.807517] PM: resume of devices complete after 2697.693 msecs
[83954.807605] PM: Finishing wakeup.
[83954.807606] Restarting tasks ... done.
[83954.811727] video LNXVIDEO:00: Restoring backlight state
[83954.812212] video LNXVIDEO:01: Restoring backlight state
[83955.138610] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[83955.175423] r8169 0000:04:00.0: eth0: link down
[83955.175917] ADDRCONF(NETDEV_UP): eth0: link is not ready
[84039.821305] gnome-panel[4550]: segfault at 20000000006 ip 00007f93d5dd1131
sp 00007fff45915090 error 4 in libclock-applet.so[7f93d5daf000+4b000]
-- System Information:
Debian Release: 7.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages gnome-panel depends on:
ii gconf-service 3.2.5-1+build1
ii gnome-icon-theme-symbolic 3.4.0-2
ii gnome-menus 3.4.2-5
ii gnome-panel-data 3.4.2.1-4
ii libatk1.0-0 2.4.0-2
ii libc6 2.13-38
ii libcairo-gobject2 1.12.2-3
ii libcairo2 1.12.2-3
ii libdconf0 0.12.1-3
ii libebook-1.2-13 3.4.4-3
ii libecal-1.2-11 3.4.4-3
ii libedataserver-1.2-16 3.4.4-3
ii libedataserverui-3.0-1 3.4.4-3
ii libgconf-2-4 3.2.5-1+build1
ii libgdk-pixbuf2.0-0 2.26.1-1
ii libglib2.0-0 2.33.12+really2.32.4-5
ii libgnome-desktop-3-2 3.4.2-1
ii libgnome-menu-3-0 3.4.2-5
ii libgtk-3-0 3.4.2-6
ii libgweather-3-0 3.4.1-1+build1
ii libical0 0.48-2
ii libice6 2:1.0.8-2
ii libpanel-applet-4-0 3.4.2.1-4
ii libpango1.0-0 1.30.0-1
ii librsvg2-2 2.36.1-1
ii libsm6 2:1.2.1-2
ii libsoup2.4-1 2.38.1-2
ii libtelepathy-glib0 0.18.2-2
ii libwnck-3-0 3.4.2-1
ii libx11-6 2:1.5.0-1+deb7u1
ii libxau6 1:1.0.7-1
ii libxml2 2.8.0+dfsg1-7+nmu1
ii libxrandr2 2:1.3.2-2+deb7u1
Versions of packages gnome-panel recommends:
ii alacarte 3.5.3-1
ii evolution-data-server 3.4.4-3
ii gnome-applets 3.4.1-3
ii gnome-control-center 1:3.4.3.1-2
ii gnome-icon-theme 3.4.0-2
ii gnome-session 3.4.2.1-4
ii gnome-session-fallback 3.4.2.1-4
ii gvfs 1.12.3-4
Versions of packages gnome-panel suggests:
ii gnome-terminal [x-terminal-emulator] 3.4.1.1-2
ii gnome-user-guide 3.4.2-1+build1
ii nautilus 3.4.2-1+build1
ii xterm [x-terminal-emulator] 278-4
ii yelp 3.4.2-1+b1
-- no debconf information
More information about the pkg-gnome-maintainers
mailing list