Bug#722899: gnome-bluetooth: Pairing passkey isn't shown in bluetooth-wizard

Jonas Häggqvist debbugs at rasher.dk
Sat Sep 14 11:27:39 UTC 2013


Package: gnome-bluetooth
Version: 3.8.1-2
Severity: normal

Dear Maintainer,

Attempting to pair with my bluetooth keyboard/mouse combo, the passkey
for completing the paring, that I'm supposed to enter on the keyboard
does not get shown. After a short period, the pairing is aborted as
unsuccesful. If I run hcidump at the same time, the passcode is
displayed, and entering leads to a succesful pairing.

It's of course possible that this is a bluez problem, but from my point
of view I have no way of telling.

Here's a hcidump of a succesful pairing (where the interface did not
show me the passkey, but I read it off hcidump). A bunch of additional
pairing chatter happens after that, of course:

HCI sniffer - Bluetooth packet analyzer ver 2.5
device: hci0 snap_len: 1500 filter: 0xffffffffffffffff
< HCI Command: Inquiry Cancel (0x01|0x0002) plen 0
> HCI Event: Command Complete (0x0e) plen 4
    Inquiry Cancel (0x01|0x0002) ncmd 1
    status 0x00
< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 90:7F:61:11:2D:1A ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 
> HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 12 bdaddr 90:7F:61:11:2D:1A type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 12
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
    handle 12 slots 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 12
    Features: 0xbf 0x06 0x86 0x78 0x18 0x1e 0x59 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 12 page 1
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
    status 0x00 handle 12 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 90:7F:61:11:2D:1A mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
    status 0x00 bdaddr 90:7F:61:11:2D:1A name 'ThinkPad Compact Bluetooth Keyboard with TrackPoint'
< HCI Command: Authentication Requested (0x01|0x0011) plen 2
    handle 12
> HCI Event: Command Status (0x0f) plen 4
    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
    bdaddr 90:7F:61:11:2D:1A
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
    bdaddr 90:7F:61:11:2D:1A
> HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Negative Reply (0x01|0x000c) ncmd 1
    status 0x00 bdaddr 90:7F:61:11:2D:1A
> HCI Event: IO Capability Request (0x31) plen 6
    bdaddr 90:7F:61:11:2D:1A
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
    bdaddr 90:7F:61:11:2D:1A capability 0x01 oob 0x00 auth 0x03
    Capability: DisplayYesNo (OOB data not present)
    Authentication: Dedicated Bonding (MITM Protection)
> HCI Event: Command Complete (0x0e) plen 10
    IO Capability Request Reply (0x01|0x002b) ncmd 1
    status 0x00 bdaddr 90:7F:61:11:2D:1A
> HCI Event: IO Capability Response (0x32) plen 9
    bdaddr 90:7F:61:11:2D:1A capability 0x02 oob 0x00 auth 0x04
    Capability: KeyboardOnly (OOB data not present)
    Authentication: General Bonding (No MITM Protection)
> HCI Event: User Passkey Notification (0x3b) plen 10
    bdaddr 90:7F:61:11:2D:1A passkey 360665
> HCI Event: Keypress Notification (0x3c) plen 7
    bdaddr 90:7F:61:11:2D:1A type 0
> HCI Event: Keypress Notification (0x3c) plen 7
    bdaddr 90:7F:61:11:2D:1A type 1
> HCI Event: Keypress Notification (0x3c) plen 7
    bdaddr 90:7F:61:11:2D:1A type 1
> HCI Event: Keypress Notification (0x3c) plen 7
    bdaddr 90:7F:61:11:2D:1A type 1
> HCI Event: Keypress Notification (0x3c) plen 7
    bdaddr 90:7F:61:11:2D:1A type 1
> HCI Event: Keypress Notification (0x3c) plen 7
    bdaddr 90:7F:61:11:2D:1A type 1
> HCI Event: Keypress Notification (0x3c) plen 7
    bdaddr 90:7F:61:11:2D:1A type 1
> HCI Event: Keypress Notification (0x3c) plen 7
    bdaddr 90:7F:61:11:2D:1A type 4
> HCI Event: Simple Pairing Complete (0x36) plen 7
    status 0x00 bdaddr 90:7F:61:11:2D:1A


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages gnome-bluetooth depends on:
ii  bluez                      4.101-2
ii  consolekit                 0.4.5-3.1
ii  gir1.2-glib-2.0            1.36.0-2+b1
ii  gir1.2-gnomebluetooth-1.0  3.8.1-2
ii  gir1.2-gtk-3.0             3.8.4-1
ii  libatk1.0-0                2.8.0-2
ii  libc6                      2.17-92+b1
ii  libcairo-gobject2          1.12.14-5
ii  libcairo2                  1.12.14-5
ii  libgdk-pixbuf2.0-0         2.28.2-1
ii  libglib2.0-0               2.36.4-1
ii  libgnome-bluetooth11       3.8.1-2
ii  libgtk-3-0                 3.8.4-1
ii  libpango-1.0-0             1.32.5-5+b1
ii  libpangocairo-1.0-0        1.32.5-5+b1
ii  obex-data-server           0.4.5-1+b3
ii  obexd-client               0.48-1
ii  udev                       175-7.2

Versions of packages gnome-bluetooth recommends:
ii  gnome-control-center  1:3.4.3.1-5+b3
ii  gvfs-backends         1.16.3-1

Versions of packages gnome-bluetooth suggests:
ii  gnome-user-share  3.8.3-1

-- no debconf information



More information about the pkg-gnome-maintainers mailing list