Bug#851353: gnome-builder: Missing deps

[NoSpam]

Package: gnome-builder
Version: 3.22.4-1
Severity: important

Dear Maintainer,

   * What led up to the situation?
These steps were taken:
- Installing "Builder" from the software center (v3.22.4)
- Creating a new "Gnome Application" project, with "Python" language.
- Selecting "Build-Project (Ctrl+F7)" button on top of window.

   * What was the outcome of this action?
See "gnome-builder.buildlog1.txt"

   * What outcome did you expect instead?
A successfull build ofcourse.

   * What exactly did you do (or not do) that was effective (or ineffective)?
To fix this problem i manually installed 'autopoint'
"$ sudo apt-get install autopoint"
After this step the build still fails though with other problems:
See "gnome-builder.buildlog2.txt"


Note: mail to this address will automatically be deleted !
-------------- next part --------------
/home/mainuser/Projects/python_test/autogen.sh
aclocal: installing 'm4/ax_check_enable_debug.m4' from '/usr/share/aclocal/ax_check_enable_debug.m4'
aclocal: installing 'm4/ax_generate_changelog.m4' from '/usr/share/aclocal/ax_generate_changelog.m4'
aclocal: installing 'm4/ax_is_release.m4' from '/usr/share/aclocal/ax_is_release.m4'
aclocal: installing 'm4/gettext.m4' from '/usr/share/aclocal/gettext.m4'
aclocal: installing 'm4/iconv.m4' from '/usr/share/aclocal/iconv.m4'
aclocal: installing 'm4/intlmacosx.m4' from '/usr/share/aclocal/intlmacosx.m4'
aclocal: installing 'm4/lib-ld.m4' from '/usr/share/aclocal/lib-ld.m4'
aclocal: installing 'm4/lib-link.m4' from '/usr/share/aclocal/lib-link.m4'
aclocal: installing 'm4/lib-prefix.m4' from '/usr/share/aclocal/lib-prefix.m4'
aclocal: installing 'm4/nls.m4' from '/usr/share/aclocal/nls.m4'
aclocal: installing 'm4/po.m4' from '/usr/share/aclocal/po.m4'
aclocal: installing 'm4/progtest.m4' from '/usr/share/aclocal/progtest.m4'
autoreconf: Entering directory `.'
autoreconf: running: autopoint --force
Can't exec "autopoint": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 345.
autoreconf: failed to run autopoint: No such file or directory
autoreconf: autopoint is needed because this package uses Gettext
-------------- next part --------------
/home/mainuser/Projects/python_test/autogen.sh
autoreconf: Entering directory `.'
autoreconf: running: autopoint --force
Copying file ABOUT-NLS
Creating directory build-aux
Copying file build-aux/config.rpath
Copying file m4/codeset.m4
Copying file m4/extern-inline.m4
Copying file m4/fcntl-o.m4
Copying file m4/glibc2.m4
Copying file m4/glibc21.m4
Copying file m4/intdiv0.m4
Copying file m4/intl.m4
Copying file m4/intldir.m4
Copying file m4/intmax.m4
Copying file m4/inttypes-pri.m4
Copying file m4/inttypes_h.m4
Copying file m4/lcmessage.m4
Copying file m4/lock.m4
Copying file m4/longlong.m4
Copying file m4/printf-posix.m4
Copying file m4/size_max.m4
Copying file m4/stdint_h.m4
Copying file m4/threadlib.m4
Copying file m4/uintmax_t.m4
Copying file m4/visibility.m4
Copying file m4/wchar_t.m4
Copying file m4/wint_t.m4
Copying file m4/xsize.m4
Copying file po/Makefile.in.in
Copying file po/Makevars.template
Copying file po/Rules-quot
Copying file po/boldquot.sed
Copying file po/en at boldquot.header
Copying file po/en at quot.header
Copying file po/insert-header.sin
Copying file po/quot.sed
Copying file po/remove-potcdate.sin
autoreconf: running: aclocal --force 
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf --force
autoreconf: running: /usr/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:61: installing 'build-aux/compile'
configure.ac:25: installing 'build-aux/config.guess'
configure.ac:25: installing 'build-aux/config.sub'
configure.ac:41: installing 'build-aux/install-sh'
configure.ac:41: installing 'build-aux/missing'
bin/Makefile.am:6: warning: whitespace following trailing backslash
bin/Makefile.am:12: warning: variable 'BUILD_SOURCES' is defined but no program or
bin/Makefile.am:12: library has 'BUILD' as canonical name (possible typo)
python_test/Makefile.am:2: installing 'build-aux/py-compile'
autoreconf: Leaving directory `.'
Skipping configure process.
/home/mainuser/Projects/python_test/configure --prefix=/home/mainuser/.cache/gnome-builder/install/python_test/host --host=x86_64-linux-gnu
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking whether make supports nested variables... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-linux-gnu-strip... x86_64-linux-gnu-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether UID '1000' is supported by ustar format... yes
checking whether GID '1000' is supported by ustar format... yes
checking how to create a ustar tar archive... gnutar
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for git... ${SHELL} /home/mainuser/Projects/python_test/build-aux/missing git
checking whether to enable debugging... no
checking for a sed that does not truncate output... /bin/sed
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for style of include used by make... GNU
checking for x86_64-linux-gnu-gcc... x86_64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-linux-gnu-gcc accepts -g... yes
checking for x86_64-linux-gnu-gcc option to accept ISO C89... none needed
checking whether x86_64-linux-gnu-gcc understands -c and -o together... yes
checking dependency style of x86_64-linux-gnu-gcc... none
checking for ld used by x86_64-linux-gnu-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking how to run the C preprocessor... x86_64-linux-gnu-gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for a sed that does not truncate output... (cached) /bin/sed
checking for glib-genmarshal... /usr/bin/glib-genmarshal
checking for glib-mkenums... /usr/bin/glib-mkenums
checking for glib-compile-resources... /usr/bin/glib-compile-resources
checking for x86_64-linux-gnu-pkg-config... /usr/bin/x86_64-linux-gnu-pkg-config
checking pkg-config is at least version 0.22... yes
checking for x86_64-linux-gnu-pkg-config... (cached) /usr/bin/x86_64-linux-gnu-pkg-config
checking pkg-config is at least version 0.16... yes
Package gio-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `gio-2.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gio-2.0' found
configure: error: glib-compile-schemas not found.