Bug#784675: /usr/libexec/gvfs-udisks2-volume-monitor: gvfs-udisks2-vo[1270]: segfault at 0 ip 00007f91b039de7b sp 00007ffdc0000a20 error 4 in libc.so.6[7f91b0309000+155000] likely on CPU 0 (core 0, socket 0)
gr
graziano.961 at virgilio.it
Tue Nov 28 23:00:32 GMT 2023
Package: gvfs-daemons
Followup-For: Bug #784675
X-Debbugs-Cc: graziano.961 at virgilio.it
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
root at orpo:~# systemctl status udisks2.service
● udisks2.service - Disk Manager
Loaded: loaded (/lib/systemd/system/udisks2.service; enabled; preset: enabled)
Active: active (running) since Tue 2023-11-28 22:41:35 CET; 1h 14min ago
Docs: man:udisks(8)
Main PID: 761 (udisksd)
Tasks: 6 (limit: 3479)
Memory: 21.5M
CPU: 1.590s
CGroup: /system.slice/udisks2.service
└─761 /usr/libexec/udisks2/udisksd
nov 28 22:41:18 orpo systemd[1]: Starting udisks2.service - Disk Manager...
nov 28 22:41:20 orpo udisksd[761]: udisks daemon version 2.10.1 starting
nov 28 22:41:35 orpo systemd[1]: Started udisks2.service - Disk Manager.
nov 28 22:41:35 orpo udisksd[761]: Acquired the name org.freedesktop.UDisks2 on the system message bus
nov 28 22:42:54 orpo udisksd[761]: Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdb': Unexpected >
0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
(g-io-error-quark, 0)
nov 28 22:42:55 orpo udisksd[761]: Mounted /dev/sdb1 at /media/gr/Intenso_1979 on behalf of uid 1000
lines 1-20/20 (END)
root at orpo:~# journalctl -fn
...
nov 28 19:36:41 orpo kernel: usb 7-4.3: new SuperSpeed USB device number 4 using xhci_hcd
nov 28 19:36:41 orpo kernel: usb 7-4.3: New USB device found, idVendor=152d, idProduct=0579, bcdDevice= 1.00
nov 28 19:36:41 orpo kernel: usb 7-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
nov 28 19:36:41 orpo kernel: usb 7-4.3: Product: External USB 3.0
nov 28 19:36:41 orpo kernel: usb 7-4.3: Manufacturer: Intenso
nov 28 19:36:41 orpo kernel: usb 7-4.3: SerialNumber:
nov 28 19:36:41 orpo mtp-probe[1267]: checking bus 7, device 4: "/sys/devices/pci0000:00/0000:00:1c.0/0000:03:00.0/usb7/7-4/7-4.3"
nov 28 19:36:41 orpo mtp-probe[1267]: bus: 7, device: 4 was not an MTP device
nov 28 19:36:41 orpo kernel: usbcore: registered new interface driver usb-storage
nov 28 19:36:41 orpo kernel: scsi host4: uas
nov 28 19:36:41 orpo kernel: usbcore: registered new interface driver uas
nov 28 19:36:41 orpo kernel: scsi 4:0:0:0: Direct-Access Intenso External USB 3.0 1201 PQ: 0 ANSI: 6
nov 28 19:36:41 orpo kernel: sd 4:0:0:0: Attached scsi generic sg2 type 0
nov 28 19:36:46 orpo kernel: sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
nov 28 19:36:46 orpo kernel: sd 4:0:0:0: [sdb] 4096-byte physical blocks
nov 28 19:36:46 orpo kernel: sd 4:0:0:0: [sdb] Write Protect is off
nov 28 19:36:46 orpo kernel: sd 4:0:0:0: [sdb] Mode Sense: 53 00 00 08
nov 28 19:36:46 orpo kernel: sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
nov 28 19:36:46 orpo kernel: sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
nov 28 19:36:46 orpo kernel: sd 4:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
nov 28 19:36:46 orpo kernel: sdb: sdb1
nov 28 19:36:46 orpo kernel: sd 4:0:0:0: [sdb] Attached SCSI disk
nov 28 19:36:46 orpo mtp-probe[1277]: checking bus 7, device 4: "/sys/devices/pci0000:00/0000:00:1c.0/0000:03:00.0/usb7/7-4/7-4.3"
nov 28 19:36:46 orpo mtp-probe[1277]: bus: 7, device: 4 was not an MTP device
nov 28 19:36:46 orpo udisksd[737]: Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdb': Unexpected sense data returned:
0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
(g-io-error-quark, 0)
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action? DE Mate doesn't realize that a new volume was inserted.
* What outcome did you expect instead? An icon of external usb hd on desktop.
*** End of the template - remove these template lines ***
-- System Information:
Debian Release: trixie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 6.5.0-4-amd64 (SMP w/2 CPU threads; PREEMPT)
Kernel taint flags: TAINT_CRAP
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages gvfs-daemons depends on:
ii gvfs-common 1.52.1-1
ii gvfs-libs 1.52.1-1
ii libbluray2 1:1.3.4-1
ii libc6 2.37-12
ii libglib2.0-0 2.78.1-4
ii libgudev-1.0-0 238-3
ii libsecret-1-0 0.21.1-1
ii libsystemd0 254.5-1
ii libudisks2-0 2.10.1-4
ii lsof 4.95.0-1
ii udisks2 2.10.1-4
Versions of packages gvfs-daemons recommends:
ii dbus 1.14.10-3
ii gvfs 1.52.1-1
Versions of packages gvfs-daemons suggests:
ii gvfs-backends 1.52.1-1
-- no debconf information
More information about the pkg-gnome-maintainers
mailing list