[DebianGIS-dev] r2348 - packages/ncview/trunk/debian

frankie at alioth.debian.org frankie at alioth.debian.org
Tue Jul 14 12:39:10 UTC 2009


Author: frankie
Date: 2009-07-14 12:39:09 +0000 (Tue, 14 Jul 2009)
New Revision: 2348

Added:
   packages/ncview/trunk/debian/watch
Removed:
   packages/ncview/trunk/debian/README.Debian
   packages/ncview/trunk/debian/cron.d.ex
   packages/ncview/trunk/debian/emacsen-install.ex
   packages/ncview/trunk/debian/emacsen-remove.ex
   packages/ncview/trunk/debian/emacsen-startup.ex
   packages/ncview/trunk/debian/init.d.ex
   packages/ncview/trunk/debian/init.d.lsb.ex
   packages/ncview/trunk/debian/manpage.1.ex
   packages/ncview/trunk/debian/manpage.sgml.ex
   packages/ncview/trunk/debian/manpage.xml.ex
   packages/ncview/trunk/debian/menu.ex
   packages/ncview/trunk/debian/ncview.default.ex
   packages/ncview/trunk/debian/ncview.doc-base.EX
   packages/ncview/trunk/debian/postinst.ex
   packages/ncview/trunk/debian/postrm.ex
   packages/ncview/trunk/debian/preinst.ex
   packages/ncview/trunk/debian/prerm.ex
   packages/ncview/trunk/debian/watch.ex
Modified:
   packages/ncview/trunk/debian/changelog
   packages/ncview/trunk/debian/control
   packages/ncview/trunk/debian/copyright
   packages/ncview/trunk/debian/docs
   packages/ncview/trunk/debian/rules
Log:
Shaped Magnus's first attempt.


Deleted: packages/ncview/trunk/debian/README.Debian
===================================================================
--- packages/ncview/trunk/debian/README.Debian	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/README.Debian	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,4 +0,0 @@
-ncview for Debian
------------------
-
- -- Magnus Hagdorn <magnus.hagdorn at marsupium.org>  Mon, 13 Jul 2009 10:12:37 +0100

Modified: packages/ncview/trunk/debian/changelog
===================================================================
--- packages/ncview/trunk/debian/changelog	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/changelog	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,6 +1,19 @@
 ncview (1.93g-1) unstable; urgency=low
 
-  * Initial release (Closes: #nnnn)  <nnnn is the bug number of your ITP>
+  [ Magnus Hagdorn ]
+  * Initial release
+    (closes: )
 
- -- Magnus Hagdorn <magnus.hagdorn at marsupium.org>  Mon, 13 Jul 2009 10:12:37 +0100
+  [ Francesco Paolo Lovergine ]
+  * Added a watch file.
+  * Policy bumped to 3.8.2.
+  * Added Vcs-* fields to debian/control
+  * Set DebianGis as maintainer and uploaders in debian/control.
+  * Removed templates and other debhelper sample stuff.
+  * Now uses dh_prep and do not remove -stamp files already removed
+    automagically.
+  * Revised descriptions.
+  * Avoiding unuseful docs installation.
+  * Now man pages install in FHS compliant directory.
 
+ -- Francesco Paolo Lovergine <frankie at debian.org>  Tue, 14 Jul 2009 14:32:15 +0200

Modified: packages/ncview/trunk/debian/control
===================================================================
--- packages/ncview/trunk/debian/control	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/control	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,16 +1,19 @@
 Source: ncview
 Section: science
 Priority: optional
-Maintainer: Magnus Hagdorn <magnus.hagdorn at marsupium.org>
+Maintainer: Debian GIS Project <pkg-grass-devel at lists.alioth.debian.org>
+Uploaders: Magnus Hagdorn <magnus.hagdorn at marsupium.org>, Francesco Paolo Lovergine <frankie at debian.org>
 Build-Depends: debhelper (>= 7), autotools-dev, libxaw7-dev, libnetcdf-dev, libnetpbm10-dev
-Standards-Version: 3.7.3
+Standards-Version: 3.8.2
 Homepage: http://meteora.ucsd.edu/~pierce/ncview_home_page.html
+Vcs-Browser: http://svn.debian.org/viewsvn/pkg-grass/packages/ncview/trunk
+Vcs-Svn: svn://svn.debian.org/svn/pkg-grass/packages/ncview/trunk
 
 Package: ncview
 Architecture: any
 Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: Ncview is a visual browser for netCDF format files.
- Typically you would use ncview to get a quick and easy, push-button look at
- your netCDF files. You can view simple movies of the data, view along various
+Description: A X11 visual browser for NetCDF format files
+ You would use ncview to get a quick and easy, push-button look at
+ your NetCDF files. You can view simple movies of the data, view along various
  dimensions, take a look at the actual data values, change color maps, invert
- the data, etc.
+ the data and other simple visual operations.

Modified: packages/ncview/trunk/debian/copyright
===================================================================
--- packages/ncview/trunk/debian/copyright	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/copyright	2009-07-14 12:39:09 UTC (rev 2348)
@@ -3,23 +3,79 @@
 
 It was downloaded from ftp://cirrus.ucsd.edu/pub/ncview/
 
-Upstream Author(s):
+Upstream Authors:
 
     David W. Pierce <dpierce at ucsd.edu>
+	Robert W. McMullen
+    Alan Richardson <mppa3 at syma.sussex.ac.uk>
 
 Copyright:
 
-    This software is copyright (c) 1993-2009 David W. Pierce
+    Copyright (C) 1993-2009 David W. Pierce
+	Copyright (C) 1994-95 Robert W. McMullen
+    Copyright (C) 1993 Alan Richardson 
 
 License:
 
-    You are free to distribute this software under the terms of
-    the GNU General Public License  either version 3 of the License.
-    On Debian systems, the complete text of the GNU General Public
-    License can be found in the file `/usr/share/common-licenses/GPL-3'.
+ You are free to distribute this software under the terms of
+ the GNU General Public License  either version 3 of the License.
+ On Debian systems, the complete text of the GNU General Public
+ License can be found in the file `/usr/share/common-licenses/GPL-3'.
 
+
+
+The SciPlot.c file is released by Robert W. McMullen with BSD license:
+
+ Copyright (c) 1995 Robert W. McMullen
+
+ Permission to use, copy, modify, distribute, and sell this software and its
+ documentation for any purpose is hereby granted without fee, provided that
+ the above copyright notice appear in all copies and that both that
+ copyright notice and this permission notice appear in supporting
+ documentation.  The author makes no representations about the suitability
+ of this software for any purpose.  It is provided "as is" without express
+ or implied warranty.
+
+ THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS.  IN NO EVENT SHALL
+ THE AUTHOR BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+ WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ SOFTWARE.
+
+It also includes the following note:
+
+----------------------------------------------------------------------------
+ The following vertical text drawing routine uses the "Fill Stippled" idea
+ found in xvertext-5.0, by Alan Richardson (mppa3 at syma.sussex.ac.uk).
+
+ The following code is my interpretation of his idea, including some
+ hacked together excerpts from his source.  The credit for the clever bits
+ belongs to him.
+
+ To be complete, portions of the subroutine XDrawVString are
+ Copyright (c) 1993 Alan Richardson (mppa3 at syma.sussex.ac.uk)
+-----------------------------------------------------------------------------
+
+The original xvertext copyright as found on many sources on the net
+is as follows:
+
+ Copyright (c) 1993 Alan Richardson (mppa3 at syma.sussex.ac.uk)
+
+ Permission to use, copy, modify, and distribute this software and its
+ documentation for any purpose and without fee is hereby granted, provided
+ that the above copyright notice appear in all copies and that both the
+ copyright notice and this permission notice appear in supporting
+ documentation.  All work developed as a consequence of the use of
+ this program should duly acknowledge such use. No representations are
+ made about the suitability of this software for any purpose. It is
+ provided "as is" without express or implied warranty.
+
+
+
+
+
 The Debian packaging is (C) 2009, Magnus Hagdorn <magnus.hagdorn at marsupium.org> and
-is licensed under the GPL, see `/usr/share/common-licenses/GPL'.
+is licensed under the GPL, see `/usr/share/common-licenses/GPL-3'.
 
-# Please also look if there are files or directories which have a
-# different copyright/license attached and list them here.

Deleted: packages/ncview/trunk/debian/cron.d.ex
===================================================================
--- packages/ncview/trunk/debian/cron.d.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/cron.d.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,4 +0,0 @@
-#
-# Regular cron jobs for the ncview package
-#
-0 4	* * *	root	[ -x /usr/bin/ncview_maintenance ] && /usr/bin/ncview_maintenance

Modified: packages/ncview/trunk/debian/docs
===================================================================
--- packages/ncview/trunk/debian/docs	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/docs	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,6 +1,3 @@
 README
-README_LOCAL
-README.sgi
-README.solaris
 README_WISH_LIST
 RELEASE_NOTES

Deleted: packages/ncview/trunk/debian/emacsen-install.ex
===================================================================
--- packages/ncview/trunk/debian/emacsen-install.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/emacsen-install.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,45 +0,0 @@
-#! /bin/sh -e
-# /usr/lib/emacsen-common/packages/install/ncview
-
-# Written by Jim Van Zandt <jrv at debian.org>, borrowing heavily
-# from the install scripts for gettext by Santiago Vila
-# <sanvila at ctv.es> and octave by Dirk Eddelbuettel <edd at debian.org>.
-
-FLAVOR=$1
-PACKAGE=ncview
-
-if [ ${FLAVOR} = emacs ]; then exit 0; fi
-
-echo install/${PACKAGE}: Handling install for emacsen flavor ${FLAVOR}
-
-#FLAVORTEST=`echo $FLAVOR | cut -c-6`
-#if [ ${FLAVORTEST} = xemacs ] ; then
-#    SITEFLAG="-no-site-file"
-#else
-#    SITEFLAG="--no-site-file"
-#fi
-FLAGS="${SITEFLAG} -q -batch -l path.el -f batch-byte-compile"
-
-ELDIR=/usr/share/emacs/site-lisp/${PACKAGE}
-ELCDIR=/usr/share/${FLAVOR}/site-lisp/${PACKAGE}
-
-# Install-info-altdir does not actually exist.
-# Maybe somebody will write it.
-if test -x /usr/sbin/install-info-altdir; then
-    echo install/${PACKAGE}: install Info links for ${FLAVOR}
-    install-info-altdir --quiet --section "" "" --dirname=${FLAVOR} /usr/share/info/${PACKAGE}.info.gz
-fi
-
-install -m 755 -d ${ELCDIR}
-cd ${ELDIR}
-FILES=`echo *.el`
-cp ${FILES} ${ELCDIR}
-cd ${ELCDIR}
-
-cat << EOF > path.el
-(setq load-path (cons "." load-path) byte-compile-warnings nil)
-EOF
-${FLAVOR} ${FLAGS} ${FILES}
-rm -f *.el path.el
-
-exit 0

Deleted: packages/ncview/trunk/debian/emacsen-remove.ex
===================================================================
--- packages/ncview/trunk/debian/emacsen-remove.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/emacsen-remove.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,15 +0,0 @@
-#!/bin/sh -e
-# /usr/lib/emacsen-common/packages/remove/ncview
-
-FLAVOR=$1
-PACKAGE=ncview
-
-if [ ${FLAVOR} != emacs ]; then
-    if test -x /usr/sbin/install-info-altdir; then
-        echo remove/${PACKAGE}: removing Info links for ${FLAVOR}
-        install-info-altdir --quiet --remove --dirname=${FLAVOR} /usr/share/info/ncview.info.gz
-    fi
-
-    echo remove/${PACKAGE}: purging byte-compiled files for ${FLAVOR}
-    rm -rf /usr/share/${FLAVOR}/site-lisp/${PACKAGE}
-fi

Deleted: packages/ncview/trunk/debian/emacsen-startup.ex
===================================================================
--- packages/ncview/trunk/debian/emacsen-startup.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/emacsen-startup.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,25 +0,0 @@
-;; -*-emacs-lisp-*-
-;;
-;; Emacs startup file, e.g.  /etc/emacs/site-start.d/50ncview.el
-;; for the Debian ncview package
-;;
-;; Originally contributed by Nils Naumann <naumann at unileoben.ac.at>
-;; Modified by Dirk Eddelbuettel <edd at debian.org>
-;; Adapted for dh-make by Jim Van Zandt <jrv at debian.org>
-
-;; The ncview package follows the Debian/GNU Linux 'emacsen' policy and
-;; byte-compiles its elisp files for each 'emacs flavor' (emacs19,
-;; xemacs19, emacs20, xemacs20...).  The compiled code is then
-;; installed in a subdirectory of the respective site-lisp directory.
-;; We have to add this to the load-path:
-(let ((package-dir (concat "/usr/share/"
-                           (symbol-name flavor)
-                           "/site-lisp/ncview")))
-;; If package-dir does not exist, the ncview package must have
-;; removed but not purged, and we should skip the setup.
-  (when (file-directory-p package-dir)
-        (setq load-path (cons package-dir load-path))
-       (autoload 'ncview-mode "ncview-mode"
-         "Major mode for editing ncview files." t)
-       (add-to-list 'auto-mode-alist '("\\.ncview$" . ncview-mode))))
-

Deleted: packages/ncview/trunk/debian/init.d.ex
===================================================================
--- packages/ncview/trunk/debian/init.d.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/init.d.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,157 +0,0 @@
-#! /bin/sh
-#
-# skeleton	example file to build /etc/init.d/ scripts.
-#		This file should be used to construct scripts for /etc/init.d.
-#
-#		Written by Miquel van Smoorenburg <miquels at cistron.nl>.
-#		Modified for Debian
-#		by Ian Murdock <imurdock at gnu.ai.mit.edu>.
-#               Further changes by Javier Fernandez-Sanguino <jfs at debian.org>
-#
-# Version:	@(#)skeleton  1.9  26-Feb-2001  miquels at cistron.nl
-#
-
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-DAEMON=/usr/sbin/ncview
-NAME=ncview
-DESC=ncview
-
-test -x $DAEMON || exit 0
-
-LOGDIR=/var/log/ncview
-PIDFILE=/var/run/$NAME.pid
-DODTIME=1                   # Time to wait for the server to die, in seconds
-                            # If this value is set too low you might not
-                            # let some servers to die gracefully and
-                            # 'restart' will not work
-
-# Include ncview defaults if available
-if [ -f /etc/default/ncview ] ; then
-	. /etc/default/ncview
-fi
-
-set -e
-
-running_pid()
-{
-    # Check if a given process pid's cmdline matches a given name
-    pid=$1
-    name=$2
-    [ -z "$pid" ] && return 1
-    [ ! -d /proc/$pid ] &&  return 1
-    cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
-    # Is this the expected child?
-    [ "$cmd" != "$name" ] &&  return 1
-    return 0
-}
-
-running()
-{
-# Check if the process is running looking at /proc
-# (works for all users)
-
-    # No pidfile, probably no daemon present
-    [ ! -f "$PIDFILE" ] && return 1
-    # Obtain the pid and check it against the binary name
-    pid=`cat $PIDFILE`
-    running_pid $pid $DAEMON || return 1
-    return 0
-}
-
-force_stop() {
-# Forcefully kill the process
-    [ ! -f "$PIDFILE" ] && return
-    if running ; then
-        kill -15 $pid
-        # Is it really dead?
-        [ -n "$DODTIME" ] && sleep "$DODTIME"s
-        if running ; then
-            kill -9 $pid
-            [ -n "$DODTIME" ] && sleep "$DODTIME"s
-            if running ; then
-                echo "Cannot kill $LABEL (pid=$pid)!"
-                exit 1
-            fi
-        fi
-    fi
-    rm -f $PIDFILE
-    return 0
-}
-
-case "$1" in
-  start)
-	echo -n "Starting $DESC: "
-	start-stop-daemon --start --quiet --pidfile $PIDFILE \
-		--exec $DAEMON -- $DAEMON_OPTS
-        if running ; then
-            echo "$NAME."
-        else
-            echo " ERROR."
-        fi
-	;;
-  stop)
-	echo -n "Stopping $DESC: "
-	start-stop-daemon --stop --quiet --pidfile $PIDFILE \
-		--exec $DAEMON
-	echo "$NAME."
-	;;
-  force-stop)
-	echo -n "Forcefully stopping $DESC: "
-        force_stop
-        if ! running ; then
-            echo "$NAME."
-        else
-            echo " ERROR."
-        fi
-	;;
-  #reload)
-	#
-	#	If the daemon can reload its config files on the fly
-	#	for example by sending it SIGHUP, do it here.
-	#
-	#	If the daemon responds to changes in its config file
-	#	directly anyway, make this a do-nothing entry.
-	#
-	# echo "Reloading $DESC configuration files."
-	# start-stop-daemon --stop --signal 1 --quiet --pidfile \
-	#	/var/run/$NAME.pid --exec $DAEMON
-  #;;
-  force-reload)
-	#
-	#	If the "reload" option is implemented, move the "force-reload"
-	#	option to the "reload" entry above. If not, "force-reload" is
-	#	just the same as "restart" except that it does nothing if the
-	#   daemon isn't already running.
-	# check wether $DAEMON is running. If so, restart
-	start-stop-daemon --stop --test --quiet --pidfile \
-		/var/run/$NAME.pid --exec $DAEMON \
-	&& $0 restart \
-	|| exit 0
-	;;
-  restart)
-    echo -n "Restarting $DESC: "
-	start-stop-daemon --stop --quiet --pidfile \
-		/var/run/$NAME.pid --exec $DAEMON
-	[ -n "$DODTIME" ] && sleep $DODTIME
-	start-stop-daemon --start --quiet --pidfile \
-		/var/run/$NAME.pid --exec $DAEMON -- $DAEMON_OPTS
-	echo "$NAME."
-	;;
-  status)
-    echo -n "$LABEL is "
-    if running ;  then
-        echo "running"
-    else
-        echo " not running."
-        exit 1
-    fi
-    ;;
-  *)
-	N=/etc/init.d/$NAME
-	# echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
-	echo "Usage: $N {start|stop|restart|force-reload|status|force-stop}" >&2
-	exit 1
-	;;
-esac
-
-exit 0

Deleted: packages/ncview/trunk/debian/init.d.lsb.ex
===================================================================
--- packages/ncview/trunk/debian/init.d.lsb.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/init.d.lsb.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,296 +0,0 @@
-#!/bin/sh
-#
-# Example init.d script with LSB support.
-#
-# Please read this init.d carefully and modify the sections to
-# adjust it to the program you want to run.
-#
-# Copyright (c) 2007 Javier Fernandez-Sanguino <jfs at debian.org>
-#
-# This is free software; you may redistribute it and/or modify
-# it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2,
-# or (at your option) any later version.
-#
-# This is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License with
-# the Debian operating system, in /usr/share/common-licenses/GPL;  if
-# not, write to the Free Software Foundation, Inc., 59 Temple Place,
-# Suite 330, Boston, MA 02111-1307 USA
-#
-### BEGIN INIT INFO
-# Provides:          ncview
-# Required-Start:    $network $local_fs
-# Required-Stop:
-# Should-Start:      $named
-# Should-Stop:
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: <Enter a short description of the sortware>
-# Description:       <Enter a long description of the software>
-#                    <...>
-#                    <...>
-### END INIT INFO
-
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-
-DAEMON=/usr/sbin/ncview # Introduce the server's location here
-NAME=#PACKAGE              # Introduce the short server's name here
-DESC=#PACKAGE              # Introduce a short description here
-LOGDIR=/var/log/ncview  # Log directory to use
-
-PIDFILE=/var/run/$NAME.pid
-
-test -x $DAEMON || exit 0
-
-. /lib/lsb/init-functions
-
-# Default options, these can be overriden by the information
-# at /etc/default/$NAME
-DAEMON_OPTS=""          # Additional options given to the server
-
-DIETIME=10              # Time to wait for the server to die, in seconds
-                        # If this value is set too low you might not
-                        # let some servers to die gracefully and
-                        # 'restart' will not work
-
-#STARTTIME=2             # Time to wait for the server to start, in seconds
-                        # If this value is set each time the server is
-                        # started (on start or restart) the script will
-                        # stall to try to determine if it is running
-                        # If it is not set and the server takes time
-                        # to setup a pid file the log message might 
-                        # be a false positive (says it did not start
-                        # when it actually did)
-                        
-LOGFILE=$LOGDIR/$NAME.log  # Server logfile
-#DAEMONUSER=ncview   # Users to run the daemons as. If this value
-                        # is set start-stop-daemon will chuid the server
-
-# Include defaults if available
-if [ -f /etc/default/$NAME ] ; then
-	. /etc/default/$NAME
-fi
-
-# Use this if you want the user to explicitly set 'RUN' in
-# /etc/default/
-#if [ "x$RUN" != "xyes" ] ; then
-#    log_failure_msg "$NAME disabled, please adjust the configuration to your needs "
-#    log_failure_msg "and then set RUN to 'yes' in /etc/default/$NAME to enable it."
-#    exit 1
-#fi
-
-# Check that the user exists (if we set a user)
-# Does the user exist?
-if [ -n "$DAEMONUSER" ] ; then
-    if getent passwd | grep -q "^$DAEMONUSER:"; then
-        # Obtain the uid and gid
-        DAEMONUID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $3}'`
-        DAEMONGID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $4}'`
-    else
-        log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist."
-        exit 1
-    fi
-fi
-
-
-set -e
-
-running_pid() {
-# Check if a given process pid's cmdline matches a given name
-    pid=$1
-    name=$2
-    [ -z "$pid" ] && return 1
-    [ ! -d /proc/$pid ] &&  return 1
-    cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
-    # Is this the expected server
-    [ "$cmd" != "$name" ] &&  return 1
-    return 0
-}
-
-running() {
-# Check if the process is running looking at /proc
-# (works for all users)
-
-    # No pidfile, probably no daemon present
-    [ ! -f "$PIDFILE" ] && return 1
-    pid=`cat $PIDFILE`
-    running_pid $pid $DAEMON || return 1
-    return 0
-}
-
-start_server() {
-# Start the process using the wrapper
-        if [ -z "$DAEMONUSER" ] ; then
-            start_daemon -p $PIDFILE $DAEMON -- $DAEMON_OPTS
-            errcode=$?
-        else
-# if we are using a daemonuser then change the user id
-            start-stop-daemon --start --quiet --pidfile $PIDFILE \
-                        --chuid $DAEMONUSER \
-                        --exec $DAEMON -- $DAEMON_OPTS
-            errcode=$?
-        fi
-	return $errcode
-}
-
-stop_server() {
-# Stop the process using the wrapper
-        if [ -z "$DAEMONUSER" ] ; then
-            killproc -p $PIDFILE $DAEMON
-            errcode=$?
-        else
-# if we are using a daemonuser then look for process that match
-            start-stop-daemon --stop --quiet --pidfile $PIDFILE \
-                        --user $DAEMONUSER \
-                        --exec $DAEMON
-            errcode=$?
-        fi
-
-	return $errcode
-}
-
-reload_server() {
-    [ ! -f "$PIDFILE" ] && return 1
-    pid=pidofproc $PIDFILE # This is the daemon's pid
-    # Send a SIGHUP
-    kill -1 $pid
-    return $?
-}
-
-force_stop() {
-# Force the process to die killing it manually
-	[ ! -e "$PIDFILE" ] && return
-	if running ; then
-		kill -15 $pid
-	# Is it really dead?
-		sleep "$DIETIME"s
-		if running ; then
-			kill -9 $pid
-			sleep "$DIETIME"s
-			if running ; then
-				echo "Cannot kill $NAME (pid=$pid)!"
-				exit 1
-			fi
-		fi
-	fi
-	rm -f $PIDFILE
-}
-
-
-case "$1" in
-  start)
-	log_daemon_msg "Starting $DESC " "$NAME"
-        # Check if it's running first
-        if running ;  then
-            log_progress_msg "apparently already running"
-            log_end_msg 0
-            exit 0
-        fi
-        if start_server ; then
-            # NOTE: Some servers might die some time after they start,
-            # this code will detect this issue if STARTTIME is set
-            # to a reasonable value
-            [ -n "$STARTTIME" ] && sleep $STARTTIME # Wait some time 
-            if  running ;  then
-                # It's ok, the server started and is running
-                log_end_msg 0
-            else
-                # It is not running after we did start
-                log_end_msg 1
-            fi
-        else
-            # Either we could not start it
-            log_end_msg 1
-        fi
-	;;
-  stop)
-        log_daemon_msg "Stopping $DESC" "$NAME"
-        if running ; then
-            # Only stop the server if we see it running
-			errcode=0
-            stop_server || errcode=$?
-            log_end_msg $errcode
-        else
-            # If it's not running don't do anything
-            log_progress_msg "apparently not running"
-            log_end_msg 0
-            exit 0
-        fi
-        ;;
-  force-stop)
-        # First try to stop gracefully the program
-        $0 stop
-        if running; then
-            # If it's still running try to kill it more forcefully
-            log_daemon_msg "Stopping (force) $DESC" "$NAME"
-			errcode=0
-            force_stop || errcode=$?
-            log_end_msg $errcode
-        fi
-	;;
-  restart|force-reload)
-        log_daemon_msg "Restarting $DESC" "$NAME"
-		errcode=0
-        stop_server || errcode=$?
-        # Wait some sensible amount, some server need this
-        [ -n "$DIETIME" ] && sleep $DIETIME
-        start_server || errcode=$?
-        [ -n "$STARTTIME" ] && sleep $STARTTIME
-        running || errcode=$?
-        log_end_msg $errcode
-	;;
-  status)
-
-        log_daemon_msg "Checking status of $DESC" "$NAME"
-        if running ;  then
-            log_progress_msg "running"
-            log_end_msg 0
-        else
-            log_progress_msg "apparently not running"
-            log_end_msg 1
-            exit 1
-        fi
-        ;;
-  # Use this if the daemon cannot reload
-  reload)
-        log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon"
-        log_warning_msg "cannot re-read the config file (use restart)."
-        ;;
-  # And this if it cann
-  #reload)
-          #
-          # If the daemon can reload its config files on the fly
-          # for example by sending it SIGHUP, do it here.
-          #
-          # If the daemon responds to changes in its config file
-          # directly anyway, make this a do-nothing entry.
-          #
-          # log_daemon_msg "Reloading $DESC configuration files" "$NAME"
-          # if running ; then
-          #    reload_server
-          #    if ! running ;  then
-          # Process died after we tried to reload
-          #       log_progress_msg "died on reload"
-          #       log_end_msg 1
-          #       exit 1
-          #    fi
-          # else
-          #    log_progress_msg "server is not running"
-          #    log_end_msg 1
-          #    exit 1
-          # fi
-                                                                                    #;;
-
-  *)
-	N=/etc/init.d/$NAME
-	echo "Usage: $N {start|stop|force-stop|restart|force-reload|status}" >&2
-	exit 1
-	;;
-esac
-
-exit 0

Deleted: packages/ncview/trunk/debian/manpage.1.ex
===================================================================
--- packages/ncview/trunk/debian/manpage.1.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/manpage.1.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,59 +0,0 @@
-.\"                                      Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH NCVIEW SECTION "July 13, 2009"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh        disable hyphenation
-.\" .hy        enable hyphenation
-.\" .ad l      left justify
-.\" .ad b      justify to both left and right margins
-.\" .nf        disable filling
-.\" .fi        enable filling
-.\" .br        insert line break
-.\" .sp <n>    insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-ncview \- program to do something
-.SH SYNOPSIS
-.B ncview
-.RI [ options ] " files" ...
-.br
-.B bar
-.RI [ options ] " files" ...
-.SH DESCRIPTION
-This manual page documents briefly the
-.B ncview
-and
-.B bar
-commands.
-.PP
-.\" TeX users may be more comfortable with the \fB<whatever>\fP and
-.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
-.\" respectively.
-\fBncview\fP is a program that...
-.SH OPTIONS
-These programs follow the usual GNU command line syntax, with long
-options starting with two dashes (`-').
-A summary of options is included below.
-For a complete description, see the Info files.
-.TP
-.B \-h, \-\-help
-Show summary of options.
-.TP
-.B \-v, \-\-version
-Show version of program.
-.SH SEE ALSO
-.BR bar (1),
-.BR baz (1).
-.br
-The programs are documented fully by
-.IR "The Rise and Fall of a Fooish Bar" ,
-available via the Info system.
-.SH AUTHOR
-ncview was written by <upstream author>.
-.PP
-This manual page was written by Magnus Hagdorn <magnus.hagdorn at marsupium.org>,
-for the Debian project (but may be used by others).

Deleted: packages/ncview/trunk/debian/manpage.sgml.ex
===================================================================
--- packages/ncview/trunk/debian/manpage.sgml.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/manpage.sgml.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,156 +0,0 @@
-<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
-
-<!-- Process this file with docbook-to-man to generate an nroff manual
-     page: `docbook-to-man manpage.sgml > manpage.1'.  You may view
-     the manual page with: `docbook-to-man manpage.sgml | nroff -man |
-     less'.  A typical entry in a Makefile or Makefile.am is:
-
-manpage.1: manpage.sgml
-	docbook-to-man $< > $@
-
-
-	The docbook-to-man binary is found in the docbook-to-man package.
-	Please remember that if you create the nroff version in one of the
-	debian/rules file targets (such as build), you will need to include
-	docbook-to-man in your Build-Depends control field.
-
-  -->
-
-  <!-- Fill in your name for FIRSTNAME and SURNAME. -->
-  <!ENTITY dhfirstname "<firstname>FIRSTNAME</firstname>">
-  <!ENTITY dhsurname   "<surname>SURNAME</surname>">
-  <!-- Please adjust the date whenever revising the manpage. -->
-  <!ENTITY dhdate      "<date>July 13, 2009</date>">
-  <!-- SECTION should be 1-8, maybe w/ subsection other parameters are
-       allowed: see man(7), man(1). -->
-  <!ENTITY dhsection   "<manvolnum>SECTION</manvolnum>">
-  <!ENTITY dhemail     "<email>magnus.hagdorn at marsupium.org</email>">
-  <!ENTITY dhusername  "Magnus Hagdorn">
-  <!ENTITY dhucpackage "<refentrytitle>NCVIEW</refentrytitle>">
-  <!ENTITY dhpackage   "ncview">
-
-  <!ENTITY debian      "<productname>Debian</productname>">
-  <!ENTITY gnu         "<acronym>GNU</acronym>">
-  <!ENTITY gpl         "&gnu; <acronym>GPL</acronym>">
-]>
-
-<refentry>
-  <refentryinfo>
-    <address>
-      &dhemail;
-    </address>
-    <author>
-      &dhfirstname;
-      &dhsurname;
-    </author>
-    <copyright>
-      <year>2003</year>
-      <holder>&dhusername;</holder>
-    </copyright>
-    &dhdate;
-  </refentryinfo>
-  <refmeta>
-    &dhucpackage;
-
-    &dhsection;
-  </refmeta>
-  <refnamediv>
-    <refname>&dhpackage;</refname>
-
-    <refpurpose>program to do something</refpurpose>
-  </refnamediv>
-  <refsynopsisdiv>
-    <cmdsynopsis>
-      <command>&dhpackage;</command>
-
-      <arg><option>-e <replaceable>this</replaceable></option></arg>
-
-      <arg><option>--example <replaceable>that</replaceable></option></arg>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-  <refsect1>
-    <title>DESCRIPTION</title>
-
-    <para>This manual page documents briefly the
-      <command>&dhpackage;</command> and <command>bar</command>
-      commands.</para>
-
-    <para>This manual page was written for the &debian; distribution
-      because the original program does not have a manual page.
-      Instead, it has documentation in the &gnu;
-      <application>Info</application> format; see below.</para>
-
-    <para><command>&dhpackage;</command> is a program that...</para>
-
-  </refsect1>
-  <refsect1>
-    <title>OPTIONS</title>
-
-    <para>These programs follow the usual &gnu; command line syntax,
-      with long options starting with two dashes (`-').  A summary of
-      options is included below.  For a complete description, see the
-      <application>Info</application> files.</para>
-
-    <variablelist>
-      <varlistentry>
-        <term><option>-h</option>
-          <option>--help</option>
-        </term>
-        <listitem>
-          <para>Show summary of options.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>-v</option>
-          <option>--version</option>
-        </term>
-        <listitem>
-          <para>Show version of program.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-  <refsect1>
-    <title>SEE ALSO</title>
-
-    <para>bar (1), baz (1).</para>
-
-    <para>The programs are documented fully by <citetitle>The Rise and
-      Fall of a Fooish Bar</citetitle> available via the
-      <application>Info</application> system.</para>
-  </refsect1>
-  <refsect1>
-    <title>AUTHOR</title>
-
-    <para>This manual page was written by &dhusername; &dhemail; for
-      the &debian; system (but may be used by others).  Permission is
-      granted to copy, distribute and/or modify this document under
-      the terms of the &gnu; General Public License, Version 2 any
-	  later version published by the Free Software Foundation.
-    </para>
-	<para>
-	  On Debian systems, the complete text of the GNU General Public
-	  License can be found in /usr/share/common-licenses/GPL.
-	</para>
-
-  </refsect1>
-</refentry>
-
-<!-- Keep this comment at the end of the file
-Local variables:
-mode: sgml
-sgml-omittag:t
-sgml-shorttag:t
-sgml-minimize-attributes:nil
-sgml-always-quote-attributes:t
-sgml-indent-step:2
-sgml-indent-data:t
-sgml-parent-document:nil
-sgml-default-dtd-file:nil
-sgml-exposed-tags:nil
-sgml-local-catalogs:nil
-sgml-local-ecat-files:nil
-End:
--->
-
-

Deleted: packages/ncview/trunk/debian/manpage.xml.ex
===================================================================
--- packages/ncview/trunk/debian/manpage.xml.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/manpage.xml.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,291 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
-"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-
-<!--
-
-`xsltproc -''-nonet \
-          -''-param man.charmap.use.subset "0" \
-          -''-param make.year.ranges "1" \
-          -''-param make.single.year.ranges "1" \
-          /usr/share/xml/docbook/stylesheet/nwalsh/manpages/docbook.xsl \
-          manpage.xml'
-
-A manual page <package>.<section> will be generated. You may view the
-manual page with: nroff -man <package>.<section> | less'. A typical entry
-in a Makefile or Makefile.am is:
-
-DB2MAN = /usr/share/sgml/docbook/stylesheet/xsl/nwalsh/manpages/docbook.xsl
-XP     = xsltproc -''-nonet -''-param man.charmap.use.subset "0"
-
-manpage.1: manpage.xml
-        $(XP) $(DB2MAN) $<
-
-The xsltproc binary is found in the xsltproc package. The XSL files are in
-docbook-xsl. A description of the parameters you can use can be found in the
-docbook-xsl-doc-* packages. Please remember that if you create the nroff
-version in one of the debian/rules file targets (such as build), you will need
-to include xsltproc and docbook-xsl in your Build-Depends control field.
-Alternatively use the xmlto command/package. That will also automatically
-pull in xsltproc and docbook-xsl.
-
-Notes for using docbook2x: docbook2x-man does not automatically create the
-AUTHOR(S) and COPYRIGHT sections. In this case, please add them manually as
-<refsect1> ... </refsect1>.
-
-To disable the automatic creation of the AUTHOR(S) and COPYRIGHT sections
-read /usr/share/doc/docbook-xsl/doc/manpages/authors.html. This file can be
-found in the docbook-xsl-doc-html package.
-
-Validation can be done using: `xmllint -''-noout -''-valid manpage.xml`
-
-General documentation about man-pages and man-page-formatting:
-man(1), man(7), http://www.tldp.org/HOWTO/Man-Page/
-
--->
-
-  <!-- Fill in your name for FIRSTNAME and SURNAME. -->
-  <!ENTITY dhfirstname "FIRSTNAME">
-  <!ENTITY dhsurname   "SURNAME">
-  <!-- dhusername could also be set to "&firstname; &surname;". -->  
-  <!ENTITY dhusername  "Magnus Hagdorn">
-  <!ENTITY dhemail     "magnus.hagdorn at marsupium.org">
-  <!-- SECTION should be 1-8, maybe w/ subsection other parameters are
-       allowed: see man(7), man(1) and
-       http://www.tldp.org/HOWTO/Man-Page/q2.html. -->
-  <!ENTITY dhsection   "SECTION">
-  <!-- TITLE should be something like "User commands" or similar (see
-       http://www.tldp.org/HOWTO/Man-Page/q2.html). -->
-  <!ENTITY dhtitle     "ncview User Manual">
-  <!ENTITY dhucpackage "NCVIEW">
-  <!ENTITY dhpackage   "ncview">
-]>
-
-<refentry>
-  <refentryinfo>
-    <title>&dhtitle;</title>
-    <productname>&dhpackage;</productname>
-    <authorgroup>
-      <author>
-       <firstname>&dhfirstname;</firstname>
-        <surname>&dhsurname;</surname>
-        <contrib>Wrote this manpage for the Debian system.</contrib>
-        <address>
-          <email>&dhemail;</email>
-        </address>
-      </author>
-    </authorgroup>
-    <copyright>
-      <year>2007</year>
-      <holder>&dhusername;</holder>
-    </copyright>
-    <legalnotice>
-      <para>This manual page was written for the Debian system
-        (but may be used by others).</para>
-      <para>Permission is granted to copy, distribute and/or modify this
-        document under the terms of the GNU General Public License,
-        Version 2 or (at your option) any later version published by
-        the Free Software Foundation.</para>
-      <para>On Debian systems, the complete text of the GNU General Public
-        License can be found in
-	<filename>/usr/share/common-licenses/GPL</filename>.</para>
-    </legalnotice>
-  </refentryinfo>
-  <refmeta>
-    <refentrytitle>&dhucpackage;</refentrytitle>
-    <manvolnum>&dhsection;</manvolnum>
-  </refmeta>
-  <refnamediv>
-    <refname>&dhpackage;</refname>
-    <refpurpose>program to do something</refpurpose>
-  </refnamediv>
-  <refsynopsisdiv>
-    <cmdsynopsis>
-      <command>&dhpackage;</command>
-      <!-- These are several examples, how syntaxes could look -->
-      <arg choice="plain"><option>-e <replaceable>this</replaceable></option></arg>
-      <arg choice="opt"><option>--example=<parameter>that</parameter></option></arg>
-      <arg choice="opt">
-        <group choice="req">
-          <arg choice="plain"><option>-e</option></arg>
-          <arg choice="plain"><option>--example</option></arg>
-        </group>
-        <replaceable class="option">this</replaceable>
-      </arg>
-      <arg choice="opt">
-        <group choice="req">
-          <arg choice="plain"><option>-e</option></arg>
-          <arg choice="plain"><option>--example</option></arg>
-        </group>
-        <group choice="req">
-          <arg choice="plain"><replaceable>this</replaceable></arg>
-          <arg choice="plain"><replaceable>that</replaceable></arg>
-        </group>
-      </arg>
-    </cmdsynopsis>
-    <cmdsynopsis>
-      <command>&dhpackage;</command>
-      <!-- Normally the help and version options make the programs stop
-           right after outputting the requested information. -->
-      <group choice="opt">
-        <arg choice="plain">
-          <group choice="req">
-            <arg choice="plain"><option>-h</option></arg>
-            <arg choice="plain"><option>--help</option></arg>
-          </group>
-        </arg>
-        <arg choice="plain">
-          <group choice="req">
-            <arg choice="plain"><option>-v</option></arg>
-            <arg choice="plain"><option>--version</option></arg>
-          </group>
-        </arg>
-      </group>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-  <refsect1 id="description">
-    <title>DESCRIPTION</title>
-    <para>This manual page documents briefly the
-      <command>&dhpackage;</command> and <command>bar</command>
-      commands.</para>
-    <para>This manual page was written for the Debian distribution
-      because the original program does not have a manual page.
-      Instead, it has documentation in the GNU <citerefentry>
-        <refentrytitle>info</refentrytitle>
-        <manvolnum>1</manvolnum>
-      </citerefentry> format; see below.</para>
-    <para><command>&dhpackage;</command> is a program that...</para>
-  </refsect1>
-  <refsect1 id="options">
-    <title>OPTIONS</title>
-    <para>The program follows the usual GNU command line syntax,
-      with long options starting with two dashes (`-').  A summary of
-      options is included below.  For a complete description, see the
-      <citerefentry>
-        <refentrytitle>info</refentrytitle>
-        <manvolnum>1</manvolnum>
-      </citerefentry> files.</para>
-    <variablelist>
-      <!-- Use the variablelist.term.separator and the
-           variablelist.term.break.after parameters to
-           control the term elements. -->
-      <varlistentry>
-        <term><option>-e <replaceable>this</replaceable></option></term>
-        <term><option>--example=<replaceable>that</replaceable></option></term>
-        <listitem>
-          <para>Does this and that.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>-h</option></term>
-        <term><option>--help</option></term>
-        <listitem>
-          <para>Show summary of options.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>-v</option></term>
-        <term><option>--version</option></term>
-        <listitem>
-          <para>Show version of program.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-  <refsect1 id="files">
-    <title>FILES</title>
-    <variablelist>
-      <varlistentry>
-        <term><filename>/etc/foo.conf</filename></term>
-        <listitem>
-          <para>The system-wide configuration file to control the
-            behaviour of <application>&dhpackage;</application>. See
-            <citerefentry>
-              <refentrytitle>foo.conf</refentrytitle>
-              <manvolnum>5</manvolnum>
-            </citerefentry> for further details.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><filename>${HOME}/.foo.conf</filename></term>
-        <listitem>
-          <para>The per-user configuration file to control the
-             behaviour of <application>&dhpackage;</application>. See
-             <citerefentry>
-               <refentrytitle>foo.conf</refentrytitle>
-               <manvolnum>5</manvolnum>
-             </citerefentry> for further details.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-  <refsect1 id="environment">
-    <title>ENVIONMENT</title>
-    <variablelist>
-      <varlistentry>
-        <term><envar>FOO_CONF</envar></term>
-        <listitem>
-          <para>If used, the defined file is used as configuration
-            file (see also <xref linkend="files"/>).</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-  <refsect1 id="diagnostics">
-    <title>DIAGNOSTICS</title>
-    <para>The following diagnostics may be issued
-      on <filename class="devicefile">stderr</filename>:</para>
-    <variablelist>
-      <varlistentry>
-        <term><errortext>Bad configuration file. Exiting.</errortext></term>
-        <listitem>
-          <para>The configuration file seems to contain a broken configuration
-            line. Use the <option>--verbose</option> option, to get more info.
-          </para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-    <para><command>&dhpackage;</command> provides some return codes, that can
-      be used in scripts:</para>
-    <segmentedlist>
-      <segtitle>Code</segtitle>
-      <segtitle>Diagnostic</segtitle>
-      <seglistitem>
-        <seg><errorcode>0</errorcode></seg>
-        <seg>Program exited successfully.</seg>
-      </seglistitem>
-      <seglistitem>
-        <seg><errorcode>1</errorcode></seg>
-        <seg>The configuration file seems to be broken.</seg>
-      </seglistitem>
-    </segmentedlist>
-  </refsect1>
-  <refsect1 id="bugs">
-    <!-- Or use this section to tell about upstream BTS. -->
-    <title>BUGS</title>
-    <para>The program is currently limited to only work
-      with the <package>foobar</package> library.</para>
-    <para>The upstreams <acronym>BTS</acronym> can be found
-      at <ulink url="http://bugzilla.foo.tld"/>.</para>
-  </refsect1>
-  <refsect1 id="see_also">
-    <title>SEE ALSO</title>
-    <!-- In alpabetical order. -->
-    <para><citerefentry>
-        <refentrytitle>bar</refentrytitle>
-        <manvolnum>1</manvolnum>
-      </citerefentry>, <citerefentry>
-        <refentrytitle>baz</refentrytitle>
-        <manvolnum>1</manvolnum>
-      </citerefentry>, <citerefentry>
-        <refentrytitle>foo.conf</refentrytitle>
-        <manvolnum>5</manvolnum>
-      </citerefentry></para>
-    <para>The programs are documented fully by <citetitle>The Rise and
-      Fall of a Fooish Bar</citetitle> available via the <citerefentry>
-        <refentrytitle>info</refentrytitle>
-        <manvolnum>1</manvolnum>
-      </citerefentry> system.</para>
-  </refsect1>
-</refentry>
-

Deleted: packages/ncview/trunk/debian/menu.ex
===================================================================
--- packages/ncview/trunk/debian/menu.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/menu.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,2 +0,0 @@
-?package(ncview):needs="X11|text|vc|wm" section="Applications/see-menu-manual"\
-  title="ncview" command="/usr/bin/ncview"

Deleted: packages/ncview/trunk/debian/ncview.default.ex
===================================================================
--- packages/ncview/trunk/debian/ncview.default.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/ncview.default.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,10 +0,0 @@
-# Defaults for ncview initscript
-# sourced by /etc/init.d/ncview
-# installed at /etc/default/ncview by the maintainer scripts
-
-#
-# This is a POSIX shell fragment
-#
-
-# Additional options that are passed to the Daemon.
-DAEMON_OPTS=""

Deleted: packages/ncview/trunk/debian/ncview.doc-base.EX
===================================================================
--- packages/ncview/trunk/debian/ncview.doc-base.EX	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/ncview.doc-base.EX	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,22 +0,0 @@
-Document: ncview
-Title: Debian ncview Manual
-Author: <insert document author here>
-Abstract: This manual describes what ncview is
- and how it can be used to
- manage online manuals on Debian systems.
-Section: unknown
-
-Format: debiandoc-sgml
-Files: /usr/share/doc/ncview/ncview.sgml.gz
-
-Format: postscript
-Files: /usr/share/doc/ncview/ncview.ps.gz
-
-Format: text
-Files: /usr/share/doc/ncview/ncview.text.gz
-
-Format: HTML
-Index: /usr/share/doc/ncview/html/index.html
-Files: /usr/share/doc/ncview/html/*.html
-
-

Deleted: packages/ncview/trunk/debian/postinst.ex
===================================================================
--- packages/ncview/trunk/debian/postinst.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/postinst.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,41 +0,0 @@
-#!/bin/sh
-# postinst script for ncview
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postinst> `configure' <most-recently-configured-version>
-#        * <old-postinst> `abort-upgrade' <new version>
-#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
-#          <new-version>
-#        * <postinst> `abort-remove'
-#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
-#          <failed-install-package> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    configure)
-    ;;
-
-    abort-upgrade|abort-remove|abort-deconfigure)
-    ;;
-
-    *)
-        echo "postinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-

Deleted: packages/ncview/trunk/debian/postrm.ex
===================================================================
--- packages/ncview/trunk/debian/postrm.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/postrm.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,39 +0,0 @@
-#!/bin/sh
-# postrm script for ncview
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postrm> `remove'
-#        * <postrm> `purge'
-#        * <old-postrm> `upgrade' <new-version>
-#        * <new-postrm> `failed-upgrade' <old-version>
-#        * <new-postrm> `abort-install'
-#        * <new-postrm> `abort-install' <old-version>
-#        * <new-postrm> `abort-upgrade' <old-version>
-#        * <disappearer's-postrm> `disappear' <overwriter>
-#          <overwriter-version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-    ;;
-
-    *)
-        echo "postrm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-

Deleted: packages/ncview/trunk/debian/preinst.ex
===================================================================
--- packages/ncview/trunk/debian/preinst.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/preinst.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,37 +0,0 @@
-#!/bin/sh
-# preinst script for ncview
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <new-preinst> `install'
-#        * <new-preinst> `install' <old-version>
-#        * <new-preinst> `upgrade' <old-version>
-#        * <old-preinst> `abort-upgrade' <new-version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    install|upgrade)
-    ;;
-
-    abort-upgrade)
-    ;;
-
-    *)
-        echo "preinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-

Deleted: packages/ncview/trunk/debian/prerm.ex
===================================================================
--- packages/ncview/trunk/debian/prerm.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/prerm.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,40 +0,0 @@
-#!/bin/sh
-# prerm script for ncview
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <prerm> `remove'
-#        * <old-prerm> `upgrade' <new-version>
-#        * <new-prerm> `failed-upgrade' <old-version>
-#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
-#        * <deconfigured's-prerm> `deconfigure' `in-favour'
-#          <package-being-installed> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    remove|upgrade|deconfigure)
-    ;;
-
-    failed-upgrade)
-    ;;
-
-    *)
-        echo "prerm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-

Modified: packages/ncview/trunk/debian/rules
===================================================================
--- packages/ncview/trunk/debian/rules	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/rules	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,15 +1,8 @@
 #!/usr/bin/make -f
-# -*- makefile -*-
-# Sample debian/rules that uses debhelper.
-# This file was originally written by Joey Hess and Craig Small.
-# As a special exception, when this file is copied by dh-make into a
-# dh-make output file, you may use that output file without restriction.
-# This special exception was added by Craig Small in version 0.37 of dh-make.
 
 # Uncomment this to turn on verbose mode.
 #export DH_VERBOSE=1
 
-
 # These are used for cross-compiling and for saving the configure script
 # from having to guess our platform (since we know it already)
 DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
@@ -25,14 +18,15 @@
 config.status: configure
 	dh_testdir
 	# Add here commands to configure the package.
+
 ifneq "$(wildcard /usr/share/misc/config.sub)" ""
 	cp -f /usr/share/misc/config.sub config.sub
 endif
 ifneq "$(wildcard /usr/share/misc/config.guess)" ""
 	cp -f /usr/share/misc/config.guess config.guess
 endif
-	./configure $(CROSS) --prefix=$(CURDIR)/debian/ncview/usr  CFLAGS="$(CFLAGS)" LDFLAGS="-Wl,-z,defs"
 
+	sh ./configure $(CROSS) --prefix=$(CURDIR)/debian/ncview/usr CFLAGS="$(CFLAGS)" LDFLAGS="-Wl,-z,defs"
 
 build: build-stamp
 
@@ -41,31 +35,30 @@
 
 	# Add here commands to compile the package.
 	$(MAKE)
-	#docbook-to-man debian/ncview.sgml > ncview.1
 
 	touch $@
 
 clean: 
 	dh_testdir
 	dh_testroot
-	rm -f build-stamp 
-
+	
 	# Add here commands to clean up after the build process.
 	[ ! -f Makefile ] || $(MAKE) clean
 	rm -f config.sub config.guess
-
+	
 	dh_clean 
 
 install: build
 	dh_testdir
 	dh_testroot
-	dh_clean -k 
+	dh_prep  
 	dh_installdirs
-
+	
 	# Add here commands to install the package into debian/ncview.
-	XAPPLRESDIR=$(CURDIR)/debian/ncview/etc/X11/app-defaults $(MAKE) install
+	XAPPLRESDIR=$(CURDIR)/debian/ncview/etc/X11/app-defaults $(MAKE) \
+				MANDIR=$(CURDIR)/debian/ncview/usr/share/man/man1 install
+	chmod a-x $(CURDIR)/debian/ncview/etc/X11/app-defaults/Ncview
 
-
 # Build architecture-independent files here.
 binary-indep: build install
 # We have nothing to do by default.
@@ -77,24 +70,11 @@
 	dh_installchangelogs 
 	dh_installdocs
 	dh_installexamples
-#	dh_install
-#	dh_installmenu
-#	dh_installdebconf	
-#	dh_installlogrotate
-#	dh_installemacsen
-#	dh_installpam
-#	dh_installmime
-#	dh_python
-#	dh_installinit
-#	dh_installcron
-#	dh_installinfo
 	dh_installman
 	dh_link
 	dh_strip
 	dh_compress
 	dh_fixperms
-#	dh_perl
-#	dh_makeshlibs
 	dh_installdeb
 	dh_shlibdeps
 	dh_gencontrol

Copied: packages/ncview/trunk/debian/watch (from rev 2344, packages/ncview/trunk/debian/watch.ex)
===================================================================
--- packages/ncview/trunk/debian/watch	                        (rev 0)
+++ packages/ncview/trunk/debian/watch	2009-07-14 12:39:09 UTC (rev 2348)
@@ -0,0 +1,3 @@
+# Compulsory line, this is a version 3 file
+version=3
+ftp://cirrus.ucsd.edu/pub/ncview/ncview-([\d\.]+[a-z])\.tar\.gz debian uupdate

Deleted: packages/ncview/trunk/debian/watch.ex
===================================================================
--- packages/ncview/trunk/debian/watch.ex	2009-07-14 09:33:48 UTC (rev 2347)
+++ packages/ncview/trunk/debian/watch.ex	2009-07-14 12:39:09 UTC (rev 2348)
@@ -1,23 +0,0 @@
-# Example watch control file for uscan
-# Rename this file to "watch" and then you can run the "uscan" command
-# to check for upstream updates and more.
-# See uscan(1) for format
-
-# Compulsory line, this is a version 3 file
-version=3
-
-# Uncomment to examine a Webpage
-# <Webpage URL> <string match>
-#http://www.example.com/downloads.php ncview-(.*)\.tar\.gz
-
-# Uncomment to examine a Webserver directory
-#http://www.example.com/pub/ncview-(.*)\.tar\.gz
-
-# Uncommment to examine a FTP server
-#ftp://ftp.example.com/pub/ncview-(.*)\.tar\.gz debian uupdate
-
-# Uncomment to find new files on sourceforge, for devscripts >= 2.9
-# http://sf.net/ncview/ncview-(.*)\.tar\.gz
-
-# Uncomment to find new files on GooglePages
-# http://example.googlepages.com/foo.html ncview-(.*)\.tar\.gz




More information about the Pkg-grass-devel mailing list