Bug#527629: grub-pc: grub-probe fails with "Cannot find a GRUB drive for /dev/scsi/sdh0-1c0i0l0p1. Check your device.map."
Bob Ham
rah at bash.sh
Fri May 8 15:32:50 UTC 2009
Package: grub-pc
Version: 1.96+20090317-1
Severity: normal
Apt fails to configure the grub-pc package:
rah at teasel:~$ sudo dpkg --configure grub-pc
Setting up grub-pc (1.96+20090317-1) ...
Generating core.img
grub-probe: error: Cannot find a GRUB drive for /dev/scsi/sdh0-1c0i0l0p1. Check your device.map.
Auto-detection of a filesystem module failed.
Please specify the module with the option `--modules' explicitly.
dpkg: error processing grub-pc (--configure):
subprocess post-installation script returned error exit status 1
Errors were encountered while processing:
grub-pc
The system has six SATA disks as /dev/sdX. The first, /dev/sda,
contains the root(+boot) partition, swap and an LVM partition:
Device Boot Start End Blocks Id System
/dev/sda1 1 62 497983+ 83 Linux
/dev/sda2 63 306 1959930 82 Linux swap / Solaris
/dev/sda3 307 4865 36620167+ 8e Linux LVM
The rest are used as devices in a RAID 5 md array:
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
1 8 49 1 active sync /dev/sdd1
2 8 65 2 active sync /dev/sde1
3 8 33 3 active sync /dev/sdc1
4 8 81 - spare /dev/sdf1
-- Package-specific info:
*********************** BEGIN /proc/mounts
/dev/sda1 / ext3 rw,noatime,errors=remount-ro,data=ordered 0 0
/dev/mapper/system-home /home ext3 rw,noatime,errors=continue,data=ordered 0 0
/dev/mapper/system-tmp /tmp ext3 rw,noatime,errors=continue,data=ordered 0 0
/dev/mapper/system-usr /usr ext3 rw,noatime,errors=continue,data=ordered 0 0
/dev/mapper/system-var /var ext3 rw,noatime,errors=continue,data=ordered 0 0
/dev/mapper/store-general /store reiserfs rw,noatime 0 0
*********************** END /proc/mounts
*********************** BEGIN /boot/grub/device.map
(hd0) /dev/sda
(hd1) /dev/sdb
(hd2) /dev/sdc
(hd3) /dev/sdd
(hd4) /dev/sde
(hd5) /dev/sdf
*********************** END /boot/grub/device.map
*********************** BEGIN /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
set default=0
set timeout=5
insmod lvm
set root=(system-usr)
search --fs-uuid --set 3db70934-1275-4760-9732-15c01f4a505b
if loadfont /share/grub/ascii.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_hurd ###
### END /etc/grub.d/10_hurd ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Debian GNU/Linux, linux 2.6.28.9-rah-4" {
set root=
linux /boot/vmlinuz-2.6.28.9-rah-4 root=/dev/scsi/sdh0-1c0i0l0p1 ro quiet
initrd /boot/initrd.img-2.6.28.9-rah-4
}
menuentry "Debian GNU/Linux, linux 2.6.28.9-rah-4 (recovery mode)" {
set root=
linux /boot/vmlinuz-2.6.28.9-rah-4 root=/dev/scsi/sdh0-1c0i0l0p1 ro single quiet
initrd /boot/initrd.img-2.6.28.9-rah-4
}
menuentry "Debian GNU/Linux, linux 2.6.28-rah-3" {
set root=
linux /boot/vmlinuz-2.6.28-rah-3 root=/dev/scsi/sdh0-1c0i0l0p1 ro quiet
initrd /boot/initrd.img-2.6.28-rah-3
}
menuentry "Debian GNU/Linux, linux 2.6.28-rah-3 (recovery mode)" {
set root=
linux /boot/vmlinuz-2.6.28-rah-3 root=/dev/scsi/sdh0-1c0i0l0p1 ro single quiet
initrd /boot/initrd.img-2.6.28-rah-3
}
menuentry "Debian GNU/Linux, linux 2.6.28-rah-2" {
set root=
linux /boot/vmlinuz-2.6.28-rah-2 root=/dev/scsi/sdh0-1c0i0l0p1 ro quiet
initrd /boot/initrd.img-2.6.28-rah-2
}
menuentry "Debian GNU/Linux, linux 2.6.28-rah-2 (recovery mode)" {
set root=
linux /boot/vmlinuz-2.6.28-rah-2 root=/dev/scsi/sdh0-1c0i0l0p1 ro single quiet
initrd /boot/initrd.img-2.6.28-rah-2
}
menuentry "Debian GNU/Linux, linux 2.6.28-rah-1" {
set root=
linux /boot/vmlinuz-2.6.28-rah-1 root=/dev/scsi/sdh0-1c0i0l0p1 ro quiet
initrd /boot/initrd.img-2.6.28-rah-1
}
menuentry "Debian GNU/Linux, linux 2.6.28-rah-1 (recovery mode)" {
set root=
linux /boot/vmlinuz-2.6.28-rah-1 root=/dev/scsi/sdh0-1c0i0l0p1 ro single quiet
initrd /boot/initrd.img-2.6.28-rah-1
}
menuentry "Debian GNU/Linux, linux 2.6.28-rah-0" {
set root=
linux /boot/vmlinuz-2.6.28-rah-0 root=/dev/scsi/sdh0-1c0i0l0p1 ro quiet
initrd /boot/initrd.img-2.6.28-rah-0
}
menuentry "Debian GNU/Linux, linux 2.6.28-rah-0 (recovery mode)" {
set root=
linux /boot/vmlinuz-2.6.28-rah-0 root=/dev/scsi/sdh0-1c0i0l0p1 ro single quiet
initrd /boot/initrd.img-2.6.28-rah-0
}
menuentry "Debian GNU/Linux, linux 2.6.28" {
set root=
linux /boot/vmlinuz-2.6.28 root=/dev/scsi/sdh0-1c0i0l0p1 ro quiet
}
menuentry "Debian GNU/Linux, linux 2.6.28 (recovery mode)" {
set root=
linux /boot/vmlinuz-2.6.28 root=/dev/scsi/sdh0-1c0i0l0p1 ro single quiet
}
menuentry "Debian GNU/Linux, linux 2.6.26.3-pata_hpt37x" {
set root=
linux /boot/vmlinuz-2.6.26.3-pata_hpt37x root=/dev/scsi/sdh0-1c0i0l0p1 ro quiet
}
menuentry "Debian GNU/Linux, linux 2.6.26.3-pata_hpt37x (recovery mode)" {
set root=
linux /boot/vmlinuz-2.6.26.3-pata_hpt37x root=/dev/scsi/sdh0-1c0i0l0p1 ro single quiet
}
menuentry "Debian GNU/Linux, linux 2.6.25-pata_hpt37x" {
set root=
linux /boot/vmlinuz-2.6.25-pata_hpt37x root=/dev/scsi/sdh0-1c0i0l0p1 ro quiet
}
menuentry "Debian GNU/Linux, linux 2.6.25-pata_hpt37x (recovery mode)" {
set root=
linux /boot/vmlinuz-2.6.25-pata_hpt37x root=/dev/scsi/sdh0-1c0i0l0p1 ro single quiet
}
menuentry "Debian GNU/Linux, linux 2.6.25-hpt366" {
set root=
linux /boot/vmlinuz-2.6.25-hpt366 root=/dev/scsi/sdh0-1c0i0l0p1 ro quiet
}
menuentry "Debian GNU/Linux, linux 2.6.25-hpt366 (recovery mode)" {
set root=
linux /boot/vmlinuz-2.6.25-hpt366 root=/dev/scsi/sdh0-1c0i0l0p1 ro single quiet
}
menuentry "Debian GNU/Linux, linux 2.4.34-epoll.no-ata" {
set root=
linux /boot/vmlinuz-2.4.34-epoll.no-ata root=/dev/scsi/sdh0-1c0i0l0p1 ro quiet
}
menuentry "Debian GNU/Linux, linux 2.4.34-epoll.no-ata (recovery mode)" {
set root=
linux /boot/vmlinuz-2.4.34-epoll.no-ata root=/dev/scsi/sdh0-1c0i0l0p1 ro single quiet
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file is an example on how to add custom entries
### END /etc/grub.d/40_custom ###
*********************** END /boot/grub/grub.cfg
-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (900, 'stable'), (800, 'testing'), (700, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.28.9-rah-4
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages grub-pc depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii grub-common 1.96+20090317-1 GRand Unified Bootloader, version
ii libc6 2.7-18 GNU C Library: Shared libraries
grub-pc recommends no packages.
Versions of packages grub-pc suggests:
pn desktop-base <none> (no description available)
pn os-prober <none> (no description available)
-- debconf information:
* grub-pc/linux_cmdline:
* grub-pc/chainload_from_menu.lst: true
More information about the Pkg-grub-devel
mailing list