Bug#565160: Linux console garbled after experimental grub-pc boot
Yves-Alexis Perez
corsac at debian.org
Wed Jan 20 07:03:59 UTC 2010
On mer., 2010-01-20 at 04:15 +0100, Robert Millan wrote:
> On Wed, Jan 13, 2010 at 08:43:18AM -0600, Jonathan Nieder wrote:
> > Version 1.98~experimental.20091229-1 is similar: though the boot menu
> > looks like text mode, when Linux boots, it is garbled and I cannot
> > make out anything until I start X.
>
> Please could each of you attach your dmesg?
Attached. This is on the box without full disk encryption. Using KMS.
--
Yves-Alexis Perez
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (ben at decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/fitz-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f7f3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7f3000 - 000000007f800000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7f7f0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f7f0000
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f7f0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f7f0000 @ 10000-14000
[ 0.000000] RAMDISK: 376bb000 - 37fefe67
[ 0.000000] ACPI: RSDP 00000000000f7820 00014 (v00 ACRSYS)
[ 0.000000] ACPI: RSDT 000000007f7f3040 00034 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007f7f30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007f7f3180 03A97 (v01 ACRSYS ACRPRDCT 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000007f7f0000 00040
[ 0.000000] ACPI: SLIC 000000007f7f6d80 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000020)
[ 0.000000] ACPI: MCFG 000000007f7f6f40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000007f7f6c80 00084 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f7f0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007f7f0000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000029eff] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007f7f0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000165d9d4] TEXT DATA BSS ==> [0001000000 - 000165d9d4]
[ 0.000000] #3 [00376bb000 - 0037fefe67] RAMDISK ==> [00376bb000 - 0037fefe67]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [000165e000 - 000165e10c] BRK ==> [000165e000 - 000165e10c]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000f36b0] f36b0
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7f0
[ 0.000000] On node 0 totalpages: 522111
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3826 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7084 pages used for memmap
[ 0.000000] DMA32 zone: 511044 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:60800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89880 r8192 d20712 u524288
[ 0.000000] pcpu-alloc: s89880 r8192 d20712 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514870
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/fitz-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2043040k/2088896k available (2981k kernel code, 452k absent, 45404k reserved, 1843k data, 576k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3192.085 MHz processor.
[ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.17 BogoMIPS (lpj=12768340)
[ 0.008036] Security Framework initialized
[ 0.008043] SELinux: Disabled at boot.
[ 0.012065] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013441] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.014092] Mount-cache hash table entries: 256
[ 0.014300] Initializing cgroup subsys ns
[ 0.014306] Initializing cgroup subsys cpuacct
[ 0.014311] Initializing cgroup subsys devices
[ 0.014314] Initializing cgroup subsys freezer
[ 0.014316] Initializing cgroup subsys net_cls
[ 0.014351] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.014355] CPU: L2 cache: 512K
[ 0.014359] CPU 0/0x0 -> Node 0
[ 0.014362] CPU: Hyper-Threading is disabled
[ 0.014366] mce: CPU supports 4 MCE banks
[ 0.014380] CPU0: Thermal monitoring enabled (TM1)
[ 0.014386] using mwait in idle threads.
[ 0.014388] Performance Events: no PMU driver, software events only.
[ 0.014400] SMP alternatives: switching to UP code
[ 0.021961] ACPI: Core revision 20090903
[ 0.032080] Setting APIC routing to flat
[ 0.036139] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075822] CPU0: Intel(R) Celeron(R) D CPU 3.20GHz stepping 05
[ 0.076001] Brought up 1 CPUs
[ 0.076001] Total of 1 processors activated (6384.17 BogoMIPS).
[ 0.076001] CPU0 attaching NULL sched-domain.
[ 0.076001] devtmpfs: initialized
[ 0.076001] regulator: core version 0.5
[ 0.076001] NET: Registered protocol family 16
[ 0.076014] ACPI: bus type pci registered
[ 0.076102] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.076105] PCI: MCFG area at e0000000 reserved in E820
[ 0.079554] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.079559] PCI: Using configuration type 1 for base access
[ 0.080185] bio: create slab <bio-0> at 0
[ 0.080801] ACPI: EC: Look up EC in DSDT
[ 0.086735] ACPI: Interpreter enabled
[ 0.086742] ACPI: (supports S0 S3 S4 S5)
[ 0.086775] ACPI: Using IOAPIC for interrupt routing
[ 0.091806] ACPI: No dock devices found.
[ 0.091965] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.092107] pci 0000:00:02.0: reg 10 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.092119] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.092124] pci 0000:00:02.0: reg 20 io port: [0xff00-0xff07]
[ 0.092209] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
[ 0.092254] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.092259] pci 0000:00:1b.0: PME# disabled
[ 0.092328] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.092332] pci 0000:00:1c.0: PME# disabled
[ 0.092401] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.092406] pci 0000:00:1c.1: PME# disabled
[ 0.092475] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.092479] pci 0000:00:1c.2: PME# disabled
[ 0.092532] pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f]
[ 0.092585] pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f]
[ 0.092638] pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f]
[ 0.092693] pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f]
[ 0.092745] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.092793] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.092798] pci 0000:00:1d.7: PME# disabled
[ 0.092932] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.092940] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.092944] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.092949] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.092953] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.093007] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.093014] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.093020] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.093026] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.093033] pci 0000:00:1f.2: reg 20 io port: [0xfa00-0xfa0f]
[ 0.093059] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.093063] pci 0000:00:1f.2: PME# disabled
[ 0.093111] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.093181] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff]
[ 0.093186] pci 0000:00:1c.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.093193] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.093240] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[ 0.093245] pci 0000:00:1c.1: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.093252] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.093315] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdafc000-0xfdafffff]
[ 0.093324] pci 0000:03:00.0: reg 18 io port: [0xce00-0xceff]
[ 0.093352] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.093395] pci 0000:03:00.0: supports D1 D2
[ 0.093397] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093402] pci 0000:03:00.0: PME# disabled
[ 0.093450] pci 0000:00:1c.2: bridge io port: [0xc000-0xcfff]
[ 0.093454] pci 0000:00:1c.2: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.093461] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.093512] pci 0000:00:1e.0: transparent bridge
[ 0.093516] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.093521] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
[ 0.093527] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd600000-0xfd6fffff]
[ 0.093552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.093778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.093862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.093944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.094029] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.110251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.110388] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.110525] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.110660] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.110799] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.110935] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.111070] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.111205] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.111344] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.111355] vgaarb: loaded
[ 0.111463] PCI: Using ACPI for IRQ routing
[ 0.111720] hpet clockevent registered
[ 0.111725] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.111731] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.111736] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.116013] Switching to clocksource tsc
[ 0.117493] pnp: PnP ACPI init
[ 0.117519] ACPI: bus type pnp registered
[ 0.119441] pnp: PnP ACPI: found 10 devices
[ 0.119444] ACPI: ACPI bus type pnp unregistered
[ 0.119461] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.119465] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.119468] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.119471] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.119475] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.119484] system 00:06: ioport range 0x400-0x4bf could not be reserved
[ 0.119492] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.119499] system 00:09: iomem range 0xcc000-0xcffff has been reserved
[ 0.119503] system 00:09: iomem range 0xd5000-0xd7fff has been reserved
[ 0.119506] system 00:09: iomem range 0xf0000-0xfbfff could not be reserved
[ 0.119509] system 00:09: iomem range 0xfc000-0xfffff could not be reserved
[ 0.119513] system 00:09: iomem range 0x7f7f0000-0x7f7fffff could not be reserved
[ 0.119516] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[ 0.119520] system 00:09: iomem range 0x100000-0x7f7effff could not be reserved
[ 0.119524] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.119527] system 00:09: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.119531] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.119534] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.119537] system 00:09: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.119541] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.119544] system 00:09: iomem range 0xe0000-0xeffff has been reserved
[ 0.124304] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.124309] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 0.124315] pci 0000:00:1c.0: MEM window: 0xfde00000-0xfdefffff
[ 0.124320] pci 0000:00:1c.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.124327] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.124330] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.124336] pci 0000:00:1c.1: MEM window: 0xfdc00000-0xfdcfffff
[ 0.124340] pci 0000:00:1c.1: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.124349] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.124353] pci 0000:00:1c.2: IO window: 0xc000-0xcfff
[ 0.124358] pci 0000:00:1c.2: MEM window: 0xfda00000-0xfdafffff
[ 0.124362] pci 0000:00:1c.2: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.124369] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.124373] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.124378] pci 0000:00:1e.0: MEM window: 0xfd700000-0xfd7fffff
[ 0.124382] pci 0000:00:1e.0: PREFETCH window: 0x000000fd600000-0x000000fd6fffff
[ 0.124401] alloc irq_desc for 16 on node -1
[ 0.124403] alloc kstat_irqs on node -1
[ 0.124413] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.124419] pci 0000:00:1c.0: setting latency timer to 64
[ 0.124432] alloc irq_desc for 17 on node -1
[ 0.124434] alloc kstat_irqs on node -1
[ 0.124442] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.124446] pci 0000:00:1c.1: setting latency timer to 64
[ 0.124456] alloc irq_desc for 18 on node -1
[ 0.124458] alloc kstat_irqs on node -1
[ 0.124462] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.124467] pci 0000:00:1c.2: setting latency timer to 64
[ 0.124474] pci 0000:00:1e.0: setting latency timer to 64
[ 0.124480] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.124483] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.124486] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.124489] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.124492] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.124495] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.124498] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.124501] pci_bus 0000:02: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.124504] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.124506] pci_bus 0000:03: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.124509] pci_bus 0000:03: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.124512] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.124515] pci_bus 0000:04: resource 1 mem: [0xfd700000-0xfd7fffff]
[ 0.124518] pci_bus 0000:04: resource 2 pref mem [0xfd600000-0xfd6fffff]
[ 0.124520] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.124523] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.124566] NET: Registered protocol family 2
[ 0.124720] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.125659] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.128279] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.128887] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.128891] TCP reno registered
[ 0.129057] NET: Registered protocol family 1
[ 0.129093] pci 0000:00:02.0: Boot video device
[ 0.129264] Unpacking initramfs...
[ 0.386960] Freeing initrd memory: 9427k freed
[ 0.393738] audit: initializing netlink socket (disabled)
[ 0.393754] type=2000 audit(1263970495.391:1): initialized
[ 0.394053] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.395760] VFS: Disk quotas dquot_6.5.2
[ 0.395837] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.395943] msgmni has been set to 4008
[ 0.396271] alg: No test for stdrng (krng)
[ 0.396348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.396351] io scheduler noop registered
[ 0.396354] io scheduler anticipatory registered
[ 0.396356] io scheduler deadline registered
[ 0.396403] io scheduler cfq registered (default)
[ 0.396533] alloc irq_desc for 24 on node -1
[ 0.396536] alloc kstat_irqs on node -1
[ 0.396550] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.396560] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.396696] alloc irq_desc for 25 on node -1
[ 0.396699] alloc kstat_irqs on node -1
[ 0.396708] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.396717] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.396852] alloc irq_desc for 26 on node -1
[ 0.396855] alloc kstat_irqs on node -1
[ 0.396863] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.396872] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.397178] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010980000, using 7552k, total 7552k
[ 0.397182] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
[ 0.397185] vesafb: scrolling: redraw
[ 0.397188] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.499776] Console: switching to colour frame buffer device 200x75
[ 0.602218] fb0: VESA VGA frame buffer device
[ 0.603896] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.604323] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.604401] PNP: No PS/2 controller found. Probing ports directly.
[ 0.604770] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.604778] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.604933] mice: PS/2 mouse device common for all mice
[ 0.604956] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 0.604995] rtc_cmos 00:03: RTC can wake from S4
[ 0.605055] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.605084] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.605098] cpuidle: using governor ladder
[ 0.605100] cpuidle: using governor menu
[ 0.605107] No iBFT detected.
[ 0.605441] TCP cubic registered
[ 0.605592] NET: Registered protocol family 10
[ 0.606137] lo: Disabled Privacy Extensions
[ 0.606435] Mobile IPv6
[ 0.606439] NET: Registered protocol family 17
[ 0.606581] registered taskstats version 1
[ 0.606885] rtc_cmos 00:03: setting system clock to 2010-01-20 06:54:56 UTC (1263970496)
[ 0.606950] Freeing unused kernel memory: 576k freed
[ 0.607308] Write protecting the kernel read-only data: 4096k
[ 0.724177] Linux agpgart interface v0.103
[ 0.742837] [drm] Initialized drm 1.1.0 20060810
[ 0.747600] agpgart-intel 0000:00:00.0: Intel 946GZ Chipset
[ 0.747766] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 0.751352] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.759303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.759314] ACPI: Power Button [PWRB]
[ 0.759406] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.759411] ACPI: Power Button [PWRF]
[ 0.777064] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.777071] i915 0000:00:02.0: setting latency timer to 64
[ 0.785167] alloc irq_desc for 27 on node -1
[ 0.785171] alloc kstat_irqs on node -1
[ 0.785185] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 0.785194] [drm] set up 7M of stolen space
[ 1.304414] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.304567] fb1: inteldrmfb frame buffer device
[ 1.304570] registered panic notifier
[ 1.304592] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.319841] fan PNP0C0B:00: registered as cooling_device0
[ 1.319855] ACPI: Fan [FAN] (on)
[ 1.323674] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.323686] ACPI: Thermal Zone [THRM] (71 C)
[ 1.323945] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.323957] ACPI: Thermal Zone [SYST] (59 C)
[ 1.544570] usbcore: registered new interface driver usbfs
[ 1.544722] usbcore: registered new interface driver hub
[ 1.545870] usbcore: registered new device driver usb
[ 1.562544] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.562595] alloc irq_desc for 23 on node -1
[ 1.562598] alloc kstat_irqs on node -1
[ 1.562609] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.562639] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.562643] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.562682] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.562709] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.566593] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 1.569639] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 1.577273] sky2 driver version 1.25
[ 1.577326] sky2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.577341] sky2 0000:03:00.0: setting latency timer to 64
[ 1.577379] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
[ 1.577468] alloc irq_desc for 28 on node -1
[ 1.577470] alloc kstat_irqs on node -1
[ 1.577488] sky2 0000:03:00.0: irq 28 for MSI/MSI-X
[ 1.578263] sky2 eth0: addr 00:15:58:6b:78:95
[ 1.579612] SCSI subsystem initialized
[ 1.597104] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.597161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.597165] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.597168] usb usb1: Product: EHCI Host Controller
[ 1.597170] usb usb1: Manufacturer: Linux 2.6.32-trunk-amd64 ehci_hcd
[ 1.597172] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.597314] usb usb1: configuration #1 chosen from 1 choice
[ 1.597356] hub 1-0:1.0: USB hub found
[ 1.597367] hub 1-0:1.0: 8 ports detected
[ 1.609703] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.609769] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.609782] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.609786] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.609807] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.609841] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
[ 1.609896] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.609900] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.609902] usb usb2: Product: UHCI Host Controller
[ 1.609905] usb usb2: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 1.609907] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.610090] usb usb2: configuration #1 chosen from 1 choice
[ 1.610170] hub 2-0:1.0: USB hub found
[ 1.610181] hub 2-0:1.0: 2 ports detected
[ 1.610256] alloc irq_desc for 19 on node -1
[ 1.610260] alloc kstat_irqs on node -1
[ 1.610270] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.610280] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.610284] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.610297] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.610339] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
[ 1.610384] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.610387] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.610390] usb usb3: Product: UHCI Host Controller
[ 1.610392] usb usb3: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 1.610395] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.610871] usb usb3: configuration #1 chosen from 1 choice
[ 1.611011] hub 3-0:1.0: USB hub found
[ 1.611025] hub 3-0:1.0: 2 ports detected
[ 1.611106] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.611121] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.611125] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.611136] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.611183] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[ 1.611234] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.611237] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.611240] usb usb4: Product: UHCI Host Controller
[ 1.611242] usb usb4: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 1.611244] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.611414] usb usb4: configuration #1 chosen from 1 choice
[ 1.611489] hub 4-0:1.0: USB hub found
[ 1.611500] hub 4-0:1.0: 2 ports detected
[ 1.611571] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.611580] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.611584] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.611594] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.611635] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
[ 1.611681] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.611685] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.611688] usb usb5: Product: UHCI Host Controller
[ 1.611690] usb usb5: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 1.611692] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.611844] usb usb5: configuration #1 chosen from 1 choice
[ 1.611918] hub 5-0:1.0: USB hub found
[ 1.611928] hub 5-0:1.0: 2 ports detected
[ 1.620080] libata version 3.00 loaded.
[ 1.622931] ata_piix 0000:00:1f.2: version 2.13
[ 1.622955] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.622961] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.623007] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.625907] scsi0 : ata_piix
[ 1.627121] scsi1 : ata_piix
[ 1.628371] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.628375] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.792562] ata2.01: ATAPI: MATSHITACD-RW CW-8124, DR1C, max UDMA/33
[ 1.808216] ata2.01: configured for UDMA/33
[ 1.835592] ata1.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133
[ 1.835596] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.918888] ata1.00: configured for UDMA/133
[ 1.919020] scsi 0:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
[ 1.938977] scsi 1:0:1:0: CD-ROM MATSHITA CD-RW CW-8124 DR1C PQ: 0 ANSI: 5
[ 1.951006] Uniform Multi-Platform E-IDE driver
[ 1.967905] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.967963] sd 0:0:0:0: [sda] Write Protect is off
[ 1.967967] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.968029] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.968204] sda: sda1 sda2 < sda5 >
[ 1.987375] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.037581] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 2.037587] Uniform CD-ROM driver Revision: 3.20
[ 2.037736] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 2.045654] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.046067] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 2.156021] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 2.273067] device-mapper: uevent: version 1.0.3
[ 2.273607] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 2.355411] usb 3-1: New USB device found, idVendor=04d9, idProduct=1504
[ 2.355416] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.355540] usb 3-1: configuration #1 chosen from 1 choice
[ 2.373792] usbcore: registered new interface driver hiddev
[ 2.422754] input: HID 04d9:1504 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
[ 2.422839] generic-usb 0003:04D9:1504.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1504] on usb-0000:00:1d.1-1/input0
[ 2.422872] usbcore: registered new interface driver usbhid
[ 2.422876] usbhid: v2.6:USB HID core driver
[ 2.478143] PM: Starting manual resume from disk
[ 2.505566] kjournald starting. Commit interval 5 seconds
[ 2.505583] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.604044] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 2.779246] usb 4-1: New USB device found, idVendor=046d, idProduct=c00c
[ 2.779252] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.779256] usb 4-1: Product: USB Optical Mouse
[ 2.779258] usb 4-1: Manufacturer: Logitech
[ 2.779372] usb 4-1: configuration #1 chosen from 1 choice
[ 2.795544] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input4
[ 2.795649] generic-usb 0003:046D:C00C.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 4.429151] udev: starting version 150
[ 5.377738] ACPI: WMI: Mapper loaded
[ 5.382047] processor LNXCPU:00: registered as cooling_device1
[ 5.502945] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 5.502958] acer-wmi: No or unsupported WMI interface, unable to load
[ 5.934213] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.961231] intel_rng: FWH not detected
[ 6.483815] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.483870] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.568236] hda_codec: ALC888: BIOS auto-probing.
[ 6.569679] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 8.207724] EXT3 FS on dm-0, internal journal
[ 8.371246] loop: module loaded
[ 8.411541] it87: Found IT8718F chip at 0x290, revision 2
[ 8.411553] it87: in3 is VCC (+5V)
[ 8.411555] it87: in7 is VCCH (+5V Stand-By)
[ 8.411592] ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296]
[ 8.411651] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.968029] kjournald starting. Commit interval 5 seconds
[ 8.968166] EXT3 FS on sda1, internal journal
[ 8.968172] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.992939] kjournald starting. Commit interval 5 seconds
[ 8.993158] EXT3 FS on dm-2, internal journal
[ 8.993165] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.028327] Adding 2097144k swap on /dev/mapper/fitz-swap. Priority:-1 extents:1 across:2097144k
[ 9.960199] sky2 eth0: enabling interface
[ 9.960460] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.039919] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 12.040223] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.154987] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.261443] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 19.262084] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 19.262088] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 19.262090] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 19.342362] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 20.270127] fuse init (API version 7.13)
[ 20.574784] NET: Registered protocol family 15
[ 20.602869] alg: No test for cipher_null (cipher_null-generic)
[ 20.602916] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 20.602950] alg: No test for digest_null (digest_null-generic)
[ 20.602980] alg: No test for compress_null (compress_null-generic)
[ 20.651790] padlock: VIA PadLock Hash Engine not detected.
[ 20.660353] padlock: VIA PadLock Hash Engine not detected.
[ 20.725243] Intel AES-NI instructions are not detected.
[ 20.736703] padlock: VIA PadLock not detected.
[ 32.015845] lp: driver loaded but no devices found
[ 32.025960] ppdev: user-space parallel port driver
[ 35.335041] [drm] DAC-6: set mode 1920x1200 21
More information about the Pkg-grub-devel
mailing list