Bug#619618: update-grub results in unbootable system
Geronimo
geronimo013 at arcor.de
Sun Apr 10 07:25:07 UTC 2011
output from bootinfoscript attached. I removed nfs- and local bind entries
from fstab. Rest of the output is unchanged.
See device changes from different boot times (no hw-change)
> In GRUB shell could you try executing
> terminal_output gfxterm
> ?
results in:
no suitable mode found
regards
Gero
-------------- next part --------------
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for (,msdos2)/grub.
=> No boot loader is installed in the MBR of /dev/sdb
=> No boot loader is installed in the MBR of /dev/sdc
=> Testdisk is installed in the MBR of /dev/sdd
=> No boot loader is installed in the MBR of /dev/sde
=> No boot loader is installed in the MBR of /dev/sdf
=> Windows is installed in the MBR of /dev/sdg
=> Grub 2 is installed in the MBR of /dev/sdh and looks on the same drive in
partition #3 for (,msdos3)/boot/grub.
sda1: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Debian GNU/Linux 6.0
Boot files/dirs: /etc/fstab
sda2: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/grub.cfg /grub/core.img
sda3: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb2: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdc1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc2: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdd1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd2: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sde1: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdf1: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdg1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdh1: _________________________________________________________________________
File system: xfs
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 41,961,779 41,961,717 83 Linux
/dev/sda2 * 41,963,520 42,743,807 780,288 83 Linux
/dev/sda3 42,743,808 78,163,967 35,420,160 83 Linux
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 150.0 GB, 150039945216 bytes
255 heads, 63 sectors/track, 18241 cylinders, total 293046768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 39,063,551 39,061,504 82 Linux swap / Solaris
/dev/sdb2 39,063,552 293,046,271 253,982,720 83 Linux
Drive: sdc ___________________ _____________________________________________________
Disk /dev/sdc: 55.0 GB, 55021510656 bytes
255 heads, 63 sectors/track, 6689 cylinders, total 107463888 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdc1 63 8,401,994 8,401,932 82 Linux swap / Solaris
/dev/sdc2 8,401,995 107,458,784 99,056,790 83 Linux
Drive: sdd ___________________ _____________________________________________________
Disk /dev/sdd: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdd1 * 63 7,807,589 7,807,527 82 Linux swap / Solaris
/dev/sdd2 7,807,590 70,734,194 62,926,605 83 Linux
Drive: sde ___________________ _____________________________________________________
Disk /dev/sde: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sde1 63 1,465,144,064 1,465,144,002 83 Linux
Drive: sdf ___________________ _____________________________________________________
Disk /dev/sdf: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdf1 64 976,773,167 976,773,104 83 Linux
Drive: sdg ___________________ _____________________________________________________
Disk /dev/sdg: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdg1 * 2,048 3,907,026,943 3,907,024,896 7 HPFS/NTFS
Drive: sdh ___________________ _____________________________________________________
Disk /dev/sdh: 500.1 GB, 500107862016 bytes
81 heads, 63 sectors/track, 191411 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdh1 2,048 976,773,167 976,771,120 83 Linux
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 7ce6540f-5ffe-445d-9bbf-d41652854700 ext4 StdRoot
/dev/sda2 59c82698-6fcc-4512-a51c-261348d637da ext3 boot
/dev/sda3 b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ext4
/dev/sda: PTTYPE="dos"
/dev/sdb1 e00d97ff-81a9-4741-8c3d-57c4169cd1f5 swap
/dev/sdb2 85b61063-621b-44eb-8f99-e9834b9b8531 ext3
/dev/sdb: PTTYPE="dos"
/dev/sdc1 129580e7-04cf-4700-82df-8ef9f6bd8fe7 swap
/dev/sdc2 44403194-a873-48ac-978c-b08a13c5d756 ext4 Squeeze_User
/dev/sdc: PTTYPE="dos"
/dev/sdd1 750773ee-f955-4f36-9c5c-1036adaeafb6 swap
/dev/sdd2 55141d3b-4331-4f4a-b127-8ea77121a483 ext4 Squeeze_Var
/dev/sdd: PTTYPE="dos"
/dev/sde1 42b730c9-2a57-47a6-b0df-f6758b7f5fa5 ext3
/dev/sde: PTTYPE="dos"
/dev/sdf1 3d38e618-2d7b-48f1-b668-f3f24d8ad2b0 ext3 VideoPool
/dev/sdf: PTTYPE="dos"
/dev/sdg1 5CA8042DA80407EA ntfs geronimo
/dev/sdg: PTTYPE="dos"
/dev/sdh1 2462a61a-8864-486b-820a-526a870a5452 xfs
/dev/sdh: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sdc2 /usr ext4 (rw,errors=remount-ro)
/dev/sdd2 /var ext4 (rw,errors=remount-ro)
/dev/sda2 /boot ext3 (rw)
/dev/sdh1 /work xfs (rw)
/dev/sdb2 /srv ext3 (rw,errors=remount-ro)
/dev/sde1 /media/video ext3 (rw,errors=remount-ro)
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
none /ramdisk tmpfs size=64m 0 0
LABEL=StdRoot / ext4 errors=remount-ro 0 1
LABEL=Squeeze_User /usr ext4 errors=remount-ro 0 2
LABEL=Squeeze_Var /var ext4 errors=remount-ro 0 2
# /boot was on /dev/sda2 during installation
LABEL=boot /boot ext3 defaults 0 2
UUID=2462a61a-8864-486b-820a-526a870a5452 /work xfs defaults 0 2
# swap was on /dev/sde1 during installation
UUID=e00d97ff-81a9-4741-8c3d-57c4169cd1f5 none swap sw 0 0
# swap was on /dev/sdf1 during installation
UUID=1f3a35fb-63dd-497b-baab-3975982389d3 none swap sw 0 0
# swap was on /dev/sdg1 during installation
UUID=750773ee-f955-4f36-9c5c-1036adaeafb6 none swap sw 0 0
UUID=85b61063-621b-44eb-8f99-e9834b9b8531 /srv ext3 errors=remount-ro 0 2
UUID=42b730c9-2a57-47a6-b0df-f6758b7f5fa5 /media/video ext3 errors=remount-ro 0 2
UUID=5CA8042DA80407EA /media/dvd ntfs ro,noauto 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0
=================== sda1: Location of files loaded by Grub: ===================
.0GB: initrd.img
.0GB: vmlinuz
============================= sda2/grub/grub.cfg: =============================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
terminal_input console
terminal_output console
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd4,msdos2)'
search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da
echo 'Loading Linux 2.6.32-5-amd64 ...'
linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro quiet
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-5-amd64
}
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd4,msdos2)'
search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da
echo 'Loading Linux 2.6.32-5-amd64 ...'
linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-5-amd64
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 2.6.35-22-generic (on /dev/sdc3)" {
insmod part_msdos
insmod ext2
set root='(hd4,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic (recovery mode) (on /dev/sdc3)" {
insmod part_msdos
insmod ext2
set root='(hd4,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro single
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=================== sda2: Location of files loaded by Grub: ===================
21.5GB: grub/core.img
21.5GB: grub/grub.cfg
21.5GB: initrd.img-2.6.32-5-amd64
21.4GB: vmlinuz-2.6.32-5-amd64
=========================== sda3/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
set locale_dir=($root)/boot/grub/locale
set lang=de
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
echo 'Loading Linux 2.6.35-22-generic ...'
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Debian GNU/Linux, with Linux 2.6.32-5-amd64 (on /dev/sdc1)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos2)'
search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da
linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro quiet
initrd /initrd.img-2.6.32-5-amd64
}
menuentry "Debian GNU/Linux, with Linux 2.6.32-5-amd64 (recovery mode) (on /dev/sdc1)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos2)'
search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da
linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro single
initrd /initrd.img-2.6.32-5-amd64
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
menuentry "chainload squeeze from maverick" {
insmod part_msdos
insmod ext2
set root=(hd2,1) ## using X and Y for /mnt/squeeze/boot
linux /grub/core.img ## or /boot/grub/core.img if / and /boot aren't different partitions
}
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sda3/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb3 during installation
UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdd1 during installation
UUID=129580e7-04cf-4700-82df-8ef9f6bd8fe7 none swap sw 0 0
# swap was on /dev/sde1 during installation
UUID=750773ee-f955-4f36-9c5c-1036adaeafb6 none swap sw 0 0
=================== sda3: Location of files loaded by Grub: ===================
26.4GB: boot/grub/core.img
26.4GB: boot/grub/grub.cfg
37.3GB: boot/initrd.img-2.6.35-22-generic
26.4GB: boot/vmlinuz-2.6.35-22-generic
37.3GB: initrd.img
26.4GB: vmlinuz
-------------- next part --------------
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #3 for (,msdos3)/boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdc and looks on the same drive in
partition #2 for (,msdos2)/grub.
=> Testdisk is installed in the MBR of /dev/sdd
=> No boot loader is installed in the MBR of /dev/sde
=> No boot loader is installed in the MBR of /dev/sdf
=> No boot loader is installed in the MBR of /dev/sdg
=> Windows is installed in the MBR of /dev/sdh
sda1: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb1: _________________________________________________________________________
File system: xfs
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdc1: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Debian GNU/Linux 6.0
Boot files/dirs: /etc/fstab
sdc2: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/grub.cfg /grub/core.img
sdc3: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdd1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd2: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sde1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sde2: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdf1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdf2: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdg1: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdh1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 1,465,144,064 1,465,144,002 83 Linux
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
81 heads, 63 sectors/track, 191411 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 976,773,167 976,771,120 83 Linux
Drive: sdc ___________________ _____________________________________________________
Disk /dev/sdc: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdc1 63 41,961,779 41,961,717 83 Linux
/dev/sdc2 * 41,963,520 42,743,807 780,288 83 Linux
/dev/sdc3 42,743,808 78,163,967 35,420,160 83 Linux
Drive: sdd ___________________ _____________________________________________________
Disk /dev/sdd: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdd1 * 63 7,807,589 7,807,527 82 Linux swap / Solaris
/dev/sdd2 7,807,590 70,734,194 62,926,605 83 Linux
Drive: sde ___________________ _____________________________________________________
Disk /dev/sde: 55.0 GB, 55021510656 bytes
255 heads, 63 sectors/track, 6689 cylinders, total 107463888 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sde1 63 8,401,994 8,401,932 82 Linux swap / Solaris
/dev/sde2 8,401,995 107,458,784 99,056,790 83 Linux
Drive: sdf ___________________ _____________________________________________________
Disk /dev/sdf: 150.0 GB, 150039945216 bytes
255 heads, 63 sectors/track, 18241 cylinders, total 293046768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdf1 2,048 39,063,551 39,061,504 82 Linux swap / Solaris
/dev/sdf2 39,063,552 293,046,271 253,982,720 83 Linux
Drive: sdg ___________________ _____________________________________________________
Disk /dev/sdg: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdg1 64 976,773,167 976,773,104 83 Linux
Drive: sdh ___________________ _____________________________________________________
Disk /dev/sdh: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdh1 * 2,048 3,907,026,943 3,907,024,896 7 HPFS/NTFS
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 42b730c9-2a57-47a6-b0df-f6758b7f5fa5 ext3
/dev/sda: PTTYPE="dos"
/dev/sdb1 2462a61a-8864-486b-820a-526a870a5452 xfs
/dev/sdb: PTTYPE="dos"
/dev/sdc1 7ce6540f-5ffe-445d-9bbf-d41652854700 ext4 StdRoot
/dev/sdc2 59c82698-6fcc-4512-a51c-261348d637da ext3 boot
/dev/sdc3 b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ext4
/dev/sdc: PTTYPE="dos"
/dev/sdd1 750773ee-f955-4f36-9c5c-1036adaeafb6 swap
/dev/sdd2 55141d3b-4331-4f4a-b127-8ea77121a483 ext4 Squeeze_Var
/dev/sdd: PTTYPE="dos"
/dev/sde1 129580e7-04cf-4700-82df-8ef9f6bd8fe7 swap
/dev/sde2 44403194-a873-48ac-978c-b08a13c5d756 ext4 Squeeze_User
/dev/sde: PTTYPE="dos"
/dev/sdf1 e00d97ff-81a9-4741-8c3d-57c4169cd1f5 swap
/dev/sdf2 85b61063-621b-44eb-8f99-e9834b9b8531 ext3
/dev/sdf: PTTYPE="dos"
/dev/sdg1 3d38e618-2d7b-48f1-b668-f3f24d8ad2b0 ext3 VideoPool
/dev/sdg: PTTYPE="dos"
/dev/sdh1 5CA8042DA80407EA ntfs geronimo
/dev/sdh: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sdc1 / ext4 (rw,errors=remount-ro)
/dev/sde2 /usr ext4 (rw,errors=remount-ro)
/dev/sdd2 /var ext4 (rw,errors=remount-ro)
/dev/sdc2 /boot ext3 (rw)
/dev/sdb1 /work xfs (rw)
/dev/sdf2 /srv ext3 (rw,errors=remount-ro)
/dev/sda1 /media/video ext3 (rw,errors=remount-ro)
=============================== sdc1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
none /ramdisk tmpfs size=64m 0 0
LABEL=StdRoot / ext4 errors=remount-ro 0 1
LABEL=Squeeze_User /usr ext4 errors=remount-ro 0 2
LABEL=Squeeze_Var /var ext4 errors=remount-ro 0 2
# /boot was on /dev/sda2 during installation
LABEL=boot /boot ext3 defaults 0 2
UUID=2462a61a-8864-486b-820a-526a870a5452 /work xfs defaults 0 2
# swap was on /dev/sde1 during installation
UUID=e00d97ff-81a9-4741-8c3d-57c4169cd1f5 none swap sw 0 0
# swap was on /dev/sdf1 during installation
UUID=1f3a35fb-63dd-497b-baab-3975982389d3 none swap sw 0 0
# swap was on /dev/sdg1 during installation
UUID=750773ee-f955-4f36-9c5c-1036adaeafb6 none swap sw 0 0
UUID=85b61063-621b-44eb-8f99-e9834b9b8531 /srv ext3 errors=remount-ro 0 2
UUID=42b730c9-2a57-47a6-b0df-f6758b7f5fa5 /media/video ext3 errors=remount-ro 0 2
UUID=5CA8042DA80407EA /media/dvd ntfs ro,noauto 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0
=================== sdc1: Location of files loaded by Grub: ===================
.0GB: initrd.img
.0GB: vmlinuz
============================= sdc2/grub/grub.cfg: =============================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
terminal_input console
terminal_output console
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd4,msdos2)'
search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da
echo 'Loading Linux 2.6.32-5-amd64 ...'
linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro quiet
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-5-amd64
}
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd4,msdos2)'
search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da
echo 'Loading Linux 2.6.32-5-amd64 ...'
linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-5-amd64
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 2.6.35-22-generic (on /dev/sdc3)" {
insmod part_msdos
insmod ext2
set root='(hd4,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic (recovery mode) (on /dev/sdc3)" {
insmod part_msdos
insmod ext2
set root='(hd4,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro single
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=================== sdc2: Location of files loaded by Grub: ===================
21.5GB: grub/core.img
21.5GB: grub/grub.cfg
21.5GB: initrd.img-2.6.32-5-amd64
21.4GB: vmlinuz-2.6.32-5-amd64
=========================== sdc3/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
set locale_dir=($root)/boot/grub/locale
set lang=de
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
echo 'Loading Linux 2.6.35-22-generic ...'
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos3)'
search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Debian GNU/Linux, with Linux 2.6.32-5-amd64 (on /dev/sdc1)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos2)'
search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da
linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro quiet
initrd /initrd.img-2.6.32-5-amd64
}
menuentry "Debian GNU/Linux, with Linux 2.6.32-5-amd64 (recovery mode) (on /dev/sdc1)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos2)'
search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da
linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro single
initrd /initrd.img-2.6.32-5-amd64
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
menuentry "chainload squeeze from maverick" {
insmod part_msdos
insmod ext2
set root=(hd2,1) ## using X and Y for /mnt/squeeze/boot
linux /grub/core.img ## or /boot/grub/core.img if / and /boot aren't different partitions
}
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sdc3/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb3 during installation
UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdd1 during installation
UUID=129580e7-04cf-4700-82df-8ef9f6bd8fe7 none swap sw 0 0
# swap was on /dev/sde1 during installation
UUID=750773ee-f955-4f36-9c5c-1036adaeafb6 none swap sw 0 0
=================== sdc3: Location of files loaded by Grub: ===================
26.4GB: boot/grub/core.img
26.4GB: boot/grub/grub.cfg
37.3GB: boot/initrd.img-2.6.35-22-generic
26.4GB: boot/vmlinuz-2.6.35-22-generic
37.3GB: initrd.img
26.4GB: vmlinuz
More information about the Pkg-grub-devel
mailing list